power meters brochure

Intr

oduc

tion

[email protected] Tel: 057 866 2162

- THE EXPERTS IN POWER QUALITY & ENERGY MONITORING

WELCOME

Powerpoint Engineering Limited is delighted to introduce to you our Power Meters brochure, offering you a ‘one stop shop’ for all Power Quality & Energy Monitoring needs and solutions. We can design, supply, install, commission and support metering systems for both Continuous Energy Monitoring and Continuous Power Quality Monitoring. You can view all these details and more on our dedicated website www.powermeters.ie.

Our ExpertiseSupplying the market since 1996, we pride ourselves on being the industry experts in the provision of Power Quality and Energy Monitoring solutions in Ireland. Our experienced engineering team can deliver expert surveys and provide full turnkey solutions to meet your specific needs.

Our SurveysWe provide a quick response in getting to your site and liaising with you throughout the entire process from problem identification to solution. We perform the full range of surveys including Power Quality Studies, Power Factor/Load Profile Surveys and Harmonic Studies. Energy Efficiency Measurements can be performed on installed equipment and we provide solutions for Demand Control, Power Factor Correction and Harmonic Filtering.

Our Products We are the authorised distributor in Ireland for leading manufacturers in the industry such as Unipower, Gossen-Metrawatt, Socomec, Fluke and Crompton Instruments. We provide a wide range of products including Panel Mounted Energy Meters, Portable Power Meters, Measuring Transducers, Current Transformers, Metering Software and Accessories.

Contact UsYou can contact us at anytime. Our customer and technical support staff offer expert advice on all aspects of your Power Quality & Energy Monitoring requirements.Telephone: 057 866 2162Email: [email protected] Fax: 057 866 2164

Company AddressPowerpoint Engineering LimitedUnit B6, National Enterprise ParkPortlaoise, Co Laois

Bespoke Metering SystemsWe design and supply bespoke power quality and energy metering systems to meet your unique set of requirements. We offer a full turnkey power quality and energy monitoring solution – this can include design, electrical install, communications bus installation and configuration, software/pc install, configuration and support.

Our ClientsThe company ethos is very much focused on you, the customer and providing you with the best possible products, service, advice and support. Our clients for Power Quality & Energy Monitoring include large utility companies, generating stations, manufacturing plants, facility managers, professional consultants and Government Bodies.

‘Powerpoint Engineering Ltd installed 400 electrical power monitoring meters at all of RTÉNL’s main transmission sites around the country. RTÉNL have found Powerpoint Engineering Ltd to be professional and competent in all aspects of the supply, install and commissioning of the complete system.”Mick Kehoe, RTÉNL

‘PM Group has utilized the services of Powerpoint Engineering for a period of over 10 years. They have at all times provided an excellent service, and we would have no hesitation in recommending them for future projects.”- Tadgh O’Sulivan, Senior Electrical Engineer, PM Group

QualityThe company is committed to quality. We have been assessed by the NSAI, and we are deemed to comply withQuality Management Standard ISO 9001:2008.

We are registered as a Level 3 Supplier with Achilles. Our products offered are designed and manufactured to the highest quality standards and you can be assured that all quality procedures strictly adhere to internationally recognised standards.


Power Quality Monitoring Surveys 2

Energy Monitoring Surveys 4

Metering System Design & Installation 6

Panel Mounted Meters 8

Socomec Diris Energy Meters 8

Gossen Metrawatt Energy Meters 12

Unipower Power Quality Analyzers 13

Crompton Instruments 14

Portable Power Meters 18Fluke Energy Meters 18

Fluke Power Quality Meters 21

Unipower Power Quality Meters 26

Gossen Metrawatt Power Quality Meters 28

Megger Power Quality Meters 30

Extech Power Quality Meters 31

Electrocorder energy Meters 35

Measuring Transducers 38Sineax Voltage Transducers 38

Programmable Transducers 38

Sineax Frequency Transducers 40

Sineax Current Transducers 41

Sineax Power Transducers 41

Current Transformers 44Split Core Current Transformer 44

Bar Or Cable-Through Current Transformer 44

Metering Software 46Socomec Energy Metering Software 46

Unipower PQ Secure Software 46

Diehl Hydrometer Energy Metering Systems 47

Accessories 48

More About Us 49

Con

tent

sCONTENTS

2 [email protected] Tel: 057 866 2162

Our Power Quality Surveys cover the suite of all Power Quality parameters, including:

• Voltage• Current• Harmonics THD• Individual order harmonics & power harmonics• Voltage Unbalance• Power Frequency• Flicker

Voltage Transient Disturbances and Voltage Sags/Swell are also recorded based on triggered and captured events. Detailed findings, their interpretation and practical solutions are included in all our reports.

We use high end power quality analyzers such as the Unipower Unilyzer 902 to conduct our surveys. These power quality analyzers are high performance instruments used for simultaneous disturbance and norm compliance measurements. We identify true three-phase measurements, including voltage quality parameters such as unbalance (IEC 61000-4-30), harmonics (IEC 61000-47) and flicker (IEC 61000-4-15).

We provide a quick response, getting to you on-site to advise you on the survey necessary to identify and resolve your issues. Our expert engineering teams deliver Power Quality Studies, Power Factor/Load Profile Surveys and Harmonic Studies.

The standard types of surveys requested are Power Quality & Harmonics Surveys (including EN50160 Analysis, EN 50160:2010, the new version of EN50160 – Voltage characteristics of electricity supplied by public networks) and Load Profile/Energy Surveys.

Pow

er Q

ualit

y M

onito

ring

Sur

veys POWER QUALITY MONITORING SURVEYS

Powerpoint Engineering Ltd has the in-house expertise, experience and necessary equipment to provide to you the complete range of Power Quality Surveys to meet your specific needs.

Contact us by phone 057 8662162 or email [email protected] to book your Power Quality Monitoring Survey today.

CASE STUDY – CEMENT FACTORY

A Sunday evening, 8.30pm, a cement factory in Ireland suddenly came to a complete stop. Garrett Kelly from Powerpoint Engineering Ltd was called in to investigate.

Eight years earlier the factory had installed PQ Secure system and a UP 2210 for post-processing of data. The meter was still logging as it should and after downloading data, investigation showed an arcing earth fault causing the interruption. Yet more important was that the data showed that the shutdown could have been avoided.

PQ Secure is designed to be an early-warning system so after a system upgrade PQ Secure is now in use documenting as before and at the same time alerting for abnormal values and disturbances. More UP 2210s have also been added to strategic connections.


CASE STUDY - VOLTAGE SAG – PHARMACEUTICAL COMPANY

This is a synopsis of Power Quality case study regarding the phenomenon of Voltage Sag experienced at a pharma plant.

SITUATION/PROBLEM

A pharmaceutical company based in Dublin had two power quality analyzers (Unipower UP2210) installed on the LV side of their two 10kV Main Incoming Supplies. The site had been experiencing some critical sags at their incoming supply. The supply authority had advised that they had experienced no issues on their supply that matched up with the occurring power quality events on site.

The Unipower PQ Secure Software for the installed analyzers yielded conflicting reports. Supply #1 indicated that the incoming supply was the origin of the Voltage Sag, whilst Supply #2 indicated that the Voltage Sag was actually being caused by the connected load at the plant.

SOLUTION

After consultation and review with Powerpoint Engineering Ltd, it was advised that the conflicting PQ Secure reports were accurate. There was a large connected load which was generating large inrush currents causing the voltage supply to sag. The supply to this load was being disturbed and the connected power quality analyzer recognised the direction of the Voltage Sag event – i.e. from the load.

The Voltage Sag was so severe that it was causing the high voltage supply to be affected, and therefore affecting the other supply also. The plant also utilised a portable Power Quality Analyzer (Unipower Unilyzer 901). This portable power quality analyser was used by the pharmaceutical company to identify the source of this recurring Sag event.

Remedial action was taken on the connected equipment, and good power quality was restored to the plant.

Contact us by phone on 057 8662162 or email [email protected] to find out more about our Power Quality Surveys.

Pow

er Q

ualit

y M

onito

ring

Sur

veysPOWER QUALITY MONITORING SURVEYS

TESTIMONIALS

“Powerpoint Engineering Ltd have provided excellent service at three of our windfarms over the past ten years. They have supplied , installed, commissioned and supported Power Quality monitoring systems during this period. We are very happy with the supplied products and support and we look forward to continuing our special relationship over the coming years.”

Denis Tangney, Saorgus Energy

“We have used Powerpoint Engineering Ltd in Portlaoise Maintenance Depot on a number of occasions for Power/Energy Monitoring and other activities.

On all occasions, we have found Powerpoint Engineering Ltd staff to be very professional and competent. We would be happy to use their services again.”

Shane McManus, Safety & Facilities, Irish Rail


Load Profile Surveys

Our Surveys are typically used for evaluating transformer loads and connected load power factor.

All Load Profile Studies include measurements for a typical load cycle:• The site load [kW]• Apparent power/MIC [kVA]• Power factor• Maximum/minimum and average values of Voltage• Load Current & Current Spikes

Load Profile Surveys can be used to evaluate available capacity of existing transformers, available current carrying capacity of existing cables or suitability/performance of power factor correction equipment.

Our detailed findings, their interpretation and recommendations are included in all our survey reports. A typical survey is carried out over a one-week period. Reports are prepared, after removal of power monitoring systems and equipment, in a prompt manner.

Ener

gy M

onito

ring

Sur

veys ENERGY MONITORING SURVEYS

Contact us by phone 057 8662162 or email [email protected] to book your Energy Monitoring Survey today.

Powerpoint Engineering Ltd can perform Energy Monitoring Surveys to suit your specific needs. We provide solutions for Demand Control, Power Factor Correction and Harmonic Filtering.

TESTIMONIAL

“PM Group, an international A&E firm with over 1800 staff in 25 locations worldwide, have utilized the services of Powerpoint Engineering for a period of over 10 years. Powerpoint have at all times provided an excellent service, and we would have no hesitation in recommending them for future projects.”

Tadgh O’Sulivan, Senior Electrical Engineer, PM Group

We have carried out electrical load studies at various industries for a range of clients including:


Ener

gy M

onito

ring

Sur

veysENERGY MONITORING SURVEYS

CASE STUDY - ENERGY METERING – LARGE DATA CENTRE

This is a synopsis of an energy monitoring case study relating to the design and supply of an award winning electrical energy metering system for a large data centre in Dublin. MITIE Facilities Management & Powerpoint Engineering Ltd collaborated in the design, installation and commissioning of the Electrical Energy Metering System.

SITUATION/PROBLEM

A large data centre based in Dublin sought to implement ISO 50001 - Energy Management at its facility. The objective of this new EU standard for energy awareness is to help organisations use energy more efficiently and save money as a consequence. A further benefit of this is it will help to conserve resources and tackle climate change. ISO 50001 encourages organisations in all sectors to use energy more efficiently through the development of an energy management system.

The standard provides a framework of requirements for organisations to:• Deploy a policy for more efficient energy use• Fix targets and objectives to meet the policy• Use data to better understand and make decisions about energy use and measure the results• Review how well the policy works and continually improve energy management.

The Data Centre Manager, as part of the requirements in implementing ISO 50001, has to account for where the energy it is using is going to ensure that it is being used efficiently. The Data Centre consists of approximately 20 data halls with a significant number of servers in each data hall. The energy costs associated with the Data Centre are in the region of €3,000,000 per annum.

SOLUTION

The Data Centre put in a place a team of professionals with the relevant expertise to help implement this new standard. This team consisted of Powerpoint Engineering Ltd, experts in the design, supply and installation of bespoke energy metering systems based on client requirements and MITIE Facilities Management, the resident Facility and Energy Managers with the relevant Facilities Management expertise and on-site knowledge.

There was significant collaboration between all parties through the duration of this award wining project to ensure the delivery of a solution which sufficiently met the needs and objectives of the client.

Contact us by phone on 057 8662162 or email [email protected] to find out more about our Energy Monitoring Surveys.

TESTIMONIAL

“Powerpoint Engineering Ltd installed 155 electrical power monitoring meters at a large Data Centre in Dublin on behalf of Mitie Facilities Management. The meters and associated monitoring system record and report electrical usage across all of the Data rooms. All data is gathered remotely and displayed on effective easy to use software interface. We have found Powerpoint Engineering very professional in all aspects of the supply, install, commissioning and ongoing expansion and continued support of the system.”

Gordon Keogh, MITIE


Metering System Design & Installation

We supply bespoke energy metering systems to your requirements. Every client has a unique set of requirements. Some may only require us to supply electrical energy metering equipment, others might need meters that specifically monitor gas, water and electrical consumption. We can supply energy metering equipment for new builds and installations or we can supply retrofit solutions.

We offer a full turnkey energy metering solution – design, electrical install, communications bus installation and configuration, software/pc install, configuration and support. Our experienced engineering team can offer site surveys to discuss your exact requirements and possible metering solutions.

Panel Mounted Meters Or Din Rail Meters Installation

All our metering systems are flexible and modular, and can be integrated into existing metering systems and BMS systems.

Alternatively, we can install and configure communications and metering software. Panel mounted or din rail mounted meters are available, displaying basic parameters such as:• Energy only (with optional outputs – pulse, modbus or

analogue)• Multi-functional displays

Remote access support solutions are provided via Teamviewer, VPN, Logmein or other means.

Met

erin

g Sy

stem

Des

ign

& In

stal

lati

on METERING SYSTEM DESIGN & INSTALLATION

Powerpoint Engineering Ltd has the necessary in-house expertise and experience to design and install bespoke Power Quality and Energy Metering Systems.

Performing load profile studies can provide a detailed footprint of the site load at a given time – however, the installation of an Energy Management System provides continuous measurements in the electrical network and detailed reporting on the site load. Electrical Network Monitoring Systems can also be installed for continuous monitoring of the site supply power quality. This is typically the first step towards achieving EN ISO 50001 Energy Management Systems Certification.

Contact us by phone on 057 8662162 or email [email protected] to arrange your Metering System Design & Installation.

TESTIMONIAL

“Powerpoint Engineering Ltd installed 400 electrical power monitoring meters at all of RTÉNL’s main transmission sites around the country. The meters and associated monitoring system record and report electrical usage across all of the individual television, radio and telecommunications services at each of the locations. All data is gathered remotely and displayed on effective easy to use software interface. RTÉNL have found Powerpoint Engineering Ltd to be professional and competent in all aspects of the supply, install and commissioning of the complete system.”

Mick Kehoe, RTÉNL

Our clients include universities, pharmaceutical & bio medical companies, the catering & hospitality sector and utilities sector.


CASE STUDY - ELECTRICITY, GAS METER & WATER METER INSTALLATION

This is a synopsis of power quality case study regarding the installation of electrical energy meters, gas meters and water meters at a third level education institution. An ongoing contract with the tertiary education institution has seen the installation of a large number of electrical energy meters, gas meters and water meters which are all connected over the site LAN back to a central PC.

SITUATION/PROBLEM

The college had a requirement to assess the carbon footprint, energy usage and associated costs with the various buildings and supplied services throughout the entire campus.

It was first decided to measure electricity, gas and water usage at the main supply points. Data logging and easy to use regular reporting software was required. Due to the size of the campus, there was a requirement to transmit the measure data via the college local area network.

OUTCOME

Powerpoint Engineering Ltd installed an energy metering system using Socomec Diris and Countis meters with Vision Control Software. This included electrical energy meters at the two main switchrooms, at each circuit on the main switchboards. Some existing water and gas meters were utilised where pulse outputs were available. Where gas and water meters did not exist, new meters were fitted and interfaced with the energy metering system.

As energy readings were gathered, large load consumers could be identified. The buildings and estate office implemented adjustments to the building management system to make energy savings where possible. In other cases new technologies were installed, such as high efficiency lighting. The result of these works could be monitored using the energy metering system installed, justifying the investment and validating the payback periods.This lead to further extension of the metering system and further installations of new energy saving and energy efficiency plant. The metering system is currently monitoring in excess of 200 measurment points.

The most recent development has been the identification of the base load to an area of the campus, the gas consumption and water usage was also monitored. From collation of measured data from the metering system a Combined Heat & Power (CHP) system was sized and installed. The performance of this CHP plant is now being monitored by the same system.

Contact us by phone on 057 8662162 or email [email protected] to find out more about our Energy Metering System Installation & Design.

Met

erin

g Sy

stem

Des

ign

& In

stal

lati

onMETERING SYSTEM DESIGN & INSTALLATION

TESTIMONIAL

“Cork Institute of Technology tendered for a Sub-Metering System in 2008. Powerpoint Engineering were successful and have managed the growth of the system from the original 30 No. electrical meters to currently 84 meters. The sub-metering system monitors both electrical and natural gas usage across the campus. All data is gathered and displayed on effective easy to use software. We have found Powerpoint Engineering Ltd to be an excellent company in all aspects of the supply, installation and expansion of the system.”

Michael Coughlan, Cork Institute of Technology


Pane

l Mou

nted

Met

ers PANEL MOUNTED METERS

We supply the full range of Panel Mounted Meters in Ireland including Socomec Diris Energy Meters, Gossen Metrawatt Energy Meters & Unipower Power Quality Analyzers. View all these and more on our dedicated website www.powermeters.ie

SOCOMEC DIRIS ENERGY METERS

Socomec Diris A RangeProduct Code: 4825 0010, 4825 0A20, 4825 0A40

The DIRIS A Power Measurement Devices with extended functionality enables you to reduce operating costs, reduce production costs, optimise maintenance costs and improve the efficiency of your facility. The Diris A Range also conforms to IEC 61557-12 standard.

Diris A Range Features:

• Metering - energy consumed by each building or manufacturing line, in order to distribute and optimise energy costs• Measuring - all electrical or analogue values (temperature, etc.) to verify that your facilities are working properly• Monitoring - your electrical networks via alarm management, secure monitoring of distribution parameters and remote

control of electrical apparatus • Analysing - energy quality via detailed breakdown of harmonics and identification of troughs, outages, overvoltages and

overcurrents on the electrical network • Communicating - all available information via a network tailored to your facility:

ETHERNET (Modbus TCP, Jbus/Modbus RTU over TCP) RS485 (Jbus/Modbus, Profibus DP)

Diris A10 - 4825 0010 Diris A20 - 4825 0A20 Diris A40 - 4825 0A40• Multi-measurement and metering• THD voltages and currents up to

level 51• Programmable hour meter• Alarm management• RS485 Jbus/Modbus communication• Dual tariff function• 4 DIN modules

• Multi-measurement and metering• THD voltages and currents up to

level 51• Programmable hour meter• Alarm management• RS485 Jbus/Modbus communication• Optional additional modules• 96 x 96 mm panel mount

• Advanced metering and multi-measurement

• Individual harmonics up to level 63• RS485 and Ethernet communication • Optional additional modules• Alarm management• Predictive power indicator• 96 x 96 mm panel mount


Pane

l Mou

nted

Met

ersPANEL MOUNTED METERS

Socomec Diris Pulse Output ModulesProduct Code: 4825 0080, 4825 0090

Using the Diris A20 or Diris A40 energy meter’s front panel display settings such as pulse constant, pulse length and pulse type can all be set up. The Socomec Diris A Pulse Output Module provides 1 pulsed output contact for connection to a metering system or BMS.

Diris A20 Pulse Output Module - 4825 0080 Diris A40 Pulse Output Module - 4825 0090

The Socomec Diris A20 Pulse Output Module is a plug-in pulse output module for the Diris A20 meter.

The Socomec Diris A40 Pulse Output Module is a plug-in pulse output module for the Diris A40 meter.

Socomec Diris A Pulse Output Module Features:

• Pulses: configurable (type, weight, time) in kWh or kvarh• Monitoring: 3I, In, 3V, 3U, F, ΣP, ΣQ, ΣS, ΣPFL / C, THD 3I, THD 3V, THD 3U and timer• Comunication: RS485 connection with JBUS/MODBUS protocol (speed up to 38,400 bauds): 1 module

MORE ABOUT DIRIS ENERGY METERS

The DIRIS energy meter analyses energy quality via detailed breakdown of harmonics and identification of troughs, outages, overvoltages and overcurrents on the electrical network.

The Socomec Diris Energy Meters Ethernet communication modules has an embedded web server function, which enables remote operation/configuration via your Internet browser, by simply entering the IP address of the DIRIS.


Pane

l Mou

nted

Met


Socomec COUNTIS E10/E11/E12 Energy MeterProduct Code: 4850 3002

Socomec COUNTIS E10/E11/E12 Energy Meters are active electrical energy meters designed for single phase load metering.

The Socomec COUNTIS E10/E11/E12 Energy Meters are used for direct connections up to 63 A and can be utilised for the direct measurement of energy, single phase or three-phase, for currents below 100 A, and three-phase indirect measurement via CTs for currents up to 6000 A.

Socomec COUNTIS E10/E11/E12 Energy Meters feature a bright LCD display with navigation and reset key, plus metrological LED. Socomec COUNTIS Ex series conforms to standards IEC 62053-21 class 1, IEC 62053-31, IEC 62053-1, EN 50470-1 and EN 50470-3.

COUNTIS E10/E11/E12 Energy Meter Features:• The Socomec COUNTIS E10 energy meter displays the total energy consumed and allows remote access through pulse output. Metering over specific period can be managed through a partial counter.• The Socomec COUNTIS E11 energy meter is a double tariff meter meant for dual tariff invoicing. The Socomec COUNTIS E12 energy meter features MID certification. MID certified meters feature extra thefts protection (meter can not be reset, sealed casing) and extra accuracy (temperature, humidity, and other external factors are extended).

Socomec COUNTIS E20/E21 Energy MeterProduct Code: 4850 3004

Socomec COUNTIS E20/E21 Energy Meters are active electrical energy meters designed for three-phase networks. COUNTIS E20/E21 Energy Meters are used for direct connections up to 63 A and conform to standards IEC 62053-21 class 1.

Socomec COUNTIS E20/E21 Energy Meters Features:

• The Socomec COUNTIS E20 energy meter displays the total energy consumed and allows remote access through pulse output. Metering over specific period can be managed though a partial counter.

• The Socomec COUNTIS E21 energy meter is a double tariff meter meant for dual tariff invoicing. For each tariff a partial counter is available.


Pane

l Mou

nted

Met


Socomec COUNTIS E30 Energy MeterProduct Code: 4850 3005

The Socomec COUNTIS E30 Energy Meter is an active electrical energy meter designed for three-phase networks. It is used for direct connections up to 100 A.

The COUNTIS E30 displays the total energy consumed and allows remote access through pulse output. Metering over specific periods can be managed though a partial counter. The Socomec COUNTIS E30 conforms to standards IEC 62053-21 class 1, IEC 62053-23 class 2, EN 50470-1 and EN 50470-3.

Socomec COUNTIS E30 Energy Meter Features:

• For three phases LV networks• Direct connection up to 100 A• +kWh and + kvarh metering• Active power measurement• 1 impulse output or JBUS/MODBUS RS485 serial port• MID version and Dual tariff version

MORE ABOUT SOCOMEC COUNTIS ENERGY METERS

COUNTIS E devices can manage up to 4 tariffs, with four separate time slots available for detailed monitoring of energy consumption. (RS485 connection required). To use COUNTIS E devices remotely a pulse output or communication via RS485 Jbus/Modbus is available.

Benefits of the COUNTIS E range:

• MID tamper-proof metering which guarantees you accuracy and reliability when metering.• Communication on all models. COUNTIS E are provided with either a pulse output or an RS485 communication output

with Modbus or M-BUS protocol.• The HVAC energy consumption regulation is designed to limit energy consumption in new buildings, whether in the

residential or service sector.• All COUNTIS E are protected against phase/neutral inversion and detect wiring errors. Installation is faster and the meter• is guaranteed to operate correctly.• Direct measurement of energy, singlephase and three-phase, for currents below 100 A. For currents over 100 A and up to• 6000 A: indirect measurement is done via current transformers. • Rapid configuration. The Easy Config software can be used to quickly and easily create, edit and save configurations for

COUNTIS E products.


Pane

l Mou

nted

Met


GOSSEN METRAWATT ENERGY METERS

We supply the full range of Gossen Metrawatt energy meter (panel mount energy meters) with MID approval. We are the approved distributor for Gossen Metrawatt in Ireland.

Gossen Metrawatt U1389 Energy Meter (MID Approved)Product Code: U1389

The Gossen Metrawatt U1389 Energy Meter is an active Energy Meter with MID Approval. This calibrated energy meter is used to acquire and bill active energy in industrial, household, commercial and building management applications. The Gossen Metrawatt U1389 Energy Meter is easy to install as the meter immediately indicates connection errors.

Relevant values are transmitted to data logging, billing and optimizing systems by means of a pulse output, or via LON, M-Bus or L-Bus interface. Depending on the type of multifunctional variant, the meter is also capable of acquiring reactive power and displaying up to 26 additional measured quantities.

Gossen Metrawatt U1389 Energy Meter Features:

• Professional energy meters for 2, 3 and 4 wire systems with 65 A direct connection, or 1 A or 5 A transformer connection• Accuracy class B for industrial and commercial use, as well as for household use with highly demanding requirements• Cost savings thanks to initial calibration at the factory in accordance with MID, conformity assessment procedure modules

B and D• Calibration even with adjustable transformation ratios• Configurable, multifunctional variants for acquiring reactive energy and mains quantities• Installation errors display: phase sequence, phase failure, transformers with reversed polarity, overload• Universal pulse output with adjustable pulse rate and pulse duration, as well as selectable voltage range• Flexible communication via integrated LON, M-Bus or L-Bus interface• Full functionality even when the electrical circuit is switched off thanks to failsafe 24 V auxiliary voltage• Tamper-proof cover, configuration disabling

Gossen Metrawatt U1389 Energy Meter Accessories:

U270A UBAT-24V ASK 31 .. 412 WSK 30 .. 70 SC30 .. 50

Installation Set for Door Mounting of Energy Meters

Battery Pack for Reading Voltage-Free Meters

Bushing-Type Current Transformer for Indirect Measurement of Sinusoidal AC

Wound-Primary Current Transformers for Indirect Measurement of Sinusoidal AC

Split-Core Current Transformers


Pane

l Mou

nted

Met


UNIPOWER POWER QUALITY ANALYZERS

We supply the full range of Unipower Power Quality Analyzers and panelmounted power meters. We are the approved Unipower distributor in Ireland.

Unipower UP-2210 Power Quality Measure UnitProduct Code: 22-003X*

The Unipower UP-2210 Power Quality Measure Unit functions as an advanced power quality meter and at the same time as a fault recorder.

The UP-2210 Power Quality Measure Unit are the nodes of which the PQ Secure system consists. For fully reliable data and reference measurements, each Unipower UP-2210 unit is certified in accordance with the measure standard IEC 61000-4-30, Class A.

The UP-2210 captures both steady state disturbances (harmonics, flicker etc) as well as rapid voltage changes (sag/swell events and fast transients). All power quality parameters can be analysed in accordance with voltage quality standards such as the EN 50 160.

Unipower PQ Secure system will automatically transfer data from the Unipower UP-2210 units to the central database, analyse the measure result and show an event list or graphical data. The software also has an automatic report generator that can create reports in accordance with international voltage standards such as EN 50160.

Unipower UP-2210 Power Quality Measure Unit Complies with:

Unipower UP-2210 Power Quality Measure Unit main features:

• All data are processed in real time by a 32 bit Digital Signal Processor.

• High speed sampling frequency of 12.8 kHz gives a better accuracy of all measured parameters.

• High accuracy in all measured parameters thanks to a synchronisation between the sampling of the input signals and the power frequency. The synchronisation is made possible by a built-in PLL (phase-locked loop).

• Easily upgradeable with newer software versions thanks to the built in Flash memory.

• The evaluation software programs PowerProfile and Unipower Report are developed specially to make the analysis process easy and straight-forward. Unipower Report makes an automatic report according to national and international standards. Any new standards can easily be adopted to Unipower Report as a plug-in module.

EMC: EN 50081-1,2 EN 50082-1,2

Voltage characteristics:EN 50160, EN 61000-2-2, EN 61000-2-12

Harmonics: IEC 61000-4-7

Flicker: IEC 61000-4-15

Power quality measurement methods:IEC 61000-4-30, Class A


Pane

l Mou

nted

Met


Integra Ri3 Digital metering systemProduct Code: Integra Ri3

The Integra Ri3 digital metering system (dms) is an accurate and cost effective solution for measurement and display of all major electrical and power quality parameters. It is an ideal choice for customers who require reliable energy measurement. Integra Ri3 dms measures 17 electrical parameters

Integra Ri3 Digital Metering System Benefits & Features:• DIN-rail enclosure DIN 43880• Backlit LCD screen• Programmable CT ratio• True rms measurement• User programmable system configuration• Pulsed output and Modbus as standard• Cost effective• Simple navigation• Crompton renowned quality

Integra Ci3 Digital Metering SystemProduct Code: Integra Ci3

The Integra Ci3 digital metering system is an accurate and cost effective solution for measurement and display of all major electrical and power quality parameters with easy programming, mounting and user friendly navigation. Integra Ci3 dms measures 17 electrical parameters including total harmonic distortion (THD) measurement up to the 31st harmonic.

Integra Ci3 Benefits & Features:• Cost effective with Intuitive navigation• Easy ‘clip-in’ panel mounting• DIN 96 enclosure• Backlit LCD screen, Bezel depth 6.1mm• Plug-in output modules, Programmable CT ratio• True rms measurement• User programmable system configuration

CROMPTON INSTRUMENTS

We supply the full range of Crompton Instruments Panel Mounted Meters. We are the approved distributor for Crompton Instruments in Ireland.

Integra Ci5 Digital Metering SystemProduct Code: Integra Ci5

The Integra Ci5 Multifunction Power Meter is an ideal choice for customers who require reliable energy measurement. It is built to high quality standards utilising ‘state of the art’ microprocessor and manufacturing technology. The Intergra Ci5 is part of the Q2C metering system which have plug-able terminals and can be used with the QC3N1 plug in current transformer and the pre-manufactured wiring looms.

Integra Ci5 Digital Metering System Features:• Voltage In and Out connection• Pulsed and RS485 Modbus RTU fitted as standard• Programmable CT ratio and True rms/THD measurement• Self powered, no need for additional auxiliary supply for screen display operation• User programmable, single-phase or three-phase four-wire system configuration• Easy ‘clip-in’ panel mounting• New blue on black back-lit and LCD screen


Pane

l Mou

nted

Met


DRB Energy-Meters Three-Phase 80-3PProduct Code: DRB 80-3P

DRB-80-3P is a digital kWh meter to register active energy, both imported and exported, with 2 So pulsed outputs for remote monitoring of active and reactive energies on both tariffs. This series of Digital energy meters measures active energy in three phase systems in residential, utility and industrial applications.

DRB Energy-Meter Three-Phase 80-3p Features:• For transformer primary current of 5A to 10.000/5A.

Input is in 5A increments• 9 digits – 4 display for energy values indication• Detection of connection errors• Accuracy class 1 for active energy according to EN 50470-3 (B)• Operating range current (Ist … Imax) for direct

connection 80A = 0.015 … 80A for connection by CT …/5A = 0.003 … 5A

• Energy register for import and export• Sealable terminal covers• 4 DIN modules wide (72mm)

Q2C Wiring SolutionProduct Code: Q2C

The Q2C wiring solution reduces wiring time by at least 80%, whilst also ensuring error-free installation. With the Q2C wiring solution, you can quickly and easily connect Integra Ci5 Digital Metering System (DMS) and 3-in-1 current transformers.

Components include the Integra Ci5 DMS, 3-in-1 CTs and wiring looms in various lengths.

Q2C Wiring Solution Key Benefits & Features:• A complete wiring solution with integral connectors and

earthing• Screwless terminal connections, vibration proof and

maintenance free• Reduces installation time by at least 80% over standard

methods• Eliminates potential cost of errors in electrical connections

or programming• Tidy solution to cable management

M-Bus Interface DRM-MProduct Code: DRM-M

The M-Bus interface (1 module wide, DIN rail mount) is intended for connecting the energy meter to M-Bus. M-Bus is a standard widely used for remote reading of various types of consumption meters and sensors.

The interface receives the measurement data from the energy meter by means of the infrared port available on the side of the meter itself, and gets the power supply from the bus, so that only the bus wiring (a two-wire standard telephone cable) must be connected, no additional wiring is required. The interface is suitable for both single-phase and three-phase energy-meter.

M-Bus Interface Drm-M Features:• Interface for energy, power, voltage, current, cos and frequency, etc.• M-Bus according to EN1434• Suitable for both single and three-phase energy-meters, network analysers and power-meters• 1 DIN module wide (18mm)


Pane

l Mou

nted

Met


KNX InterfaceProduct Code: DRM-KNX

The KNX interface (1 module wide, DIN rail mount) is intended for connecting the energy meter to KNX bus.

KNX bus is widely used for home and building control applications. The interface receives the measurement data from the energy meter by means of the infrared port available on the side of the energy meter itself, and gets the power supply from the bus. Only the bus wiring (twisted pair) must be connected, no additional wiring is required.

The interface is suitable for both single-phase and three-phase energy-meters (DRB-80-3P).

KNX Interface Features:• Interface for energy register and power measurements, etc.• Communication in compliance with KNX standard for

home and building control• Configuration via ETS3• Energy registers transmitted as float values (EIS9)• Suitable for both single-phase and three-phase energy-

meter• 1 DIN module wide (18mm)

Modbus interface RTU and Ascii DRM-MODProduct Code: DRM-MOD

The product is intended to be placed side by side to an energy meter, equipped with an infra-red port on the side, to collect the measurements data from the instrument and to transmit them via an RS-485 serial line to a remote collection station using Modbus protocol.

The communication module automatically recognizes the instrument connected to its infra-red port and is in the position to transmit all the data provided by the instrument itself.

1 standard module housing (18mm wide), suitable for DIN-rail mounting 35mm

Modbus Interface RTU and Ascii DRM-MOD Features:• Interface available:

type BIG ENDIAN: for energy, power, voltage, current, cos and frequency, etc.

• Modbus Ascii and Modbus, RTU protocols• Suitable for both single-phase and three-phase energy-

meter• 1 DIN module wide (18mm)


Pane

l Mou

nted

Met


DRM Energy-Meters Single-Phase 32 -1PProduct Code: DRM 32-1P

The energy-meters use an LCD display to give a clear reading and are used to measure single-phase systems in residential, utility and industrial applications. Monitoring of the energy-consumption is via two SO pulse outputs.

The products can be set up to communicate with Modbus RTU, M-Bus, KNX and SD card datalogger interfaces, and thus can be used to analyse energy-consumption in order to reduce to a minimum the running cost for industrial plants and buildings.

Active energy-meters for single-phase alternating current with a, 7 digits counter. These meters have 1 S0 output generating pulses for remote processing of the active energy measurements for 1 tariff.

DRM Energy-Meters Single-Phase 32-1P Features:• Display LCD• For direct connection 32A and 40A• 7 digits for energy and other values indication• Accuracy class 1 for active energy and power according to EN 50470-3 (B)• Operating Current for direct connection 32A and 40A = 0.020• Seal-able terminal covers• Designed to be combined with the communication module• 1 DIN modules wide (18mm)


Port

able

Pow

er M

eter

s PORTABLE POWER METERS

Fluke Thermal Imager A3001FC IFlex KitProduct Code: A3001FC

Fluke Thermal Imager kits combined with the Fluke Connect app, test tools and modules allow you to create the highest performance in troubleshooting and maintenance:

• All your Test & Measurement data combined• Easily document your data• Share data with your team without leaving the field• Work more flexible, faster, safe and secure.

Fluke A3001FC iFlex Kit includes:• Fluke 3000 FC Wireless Digital Multimeter with three (3)

AA batteries (installed)• One (1) A3001 FC Module with two (2) AA batteries• One (1) iFlex 10” coil and One (1) magnet/strap• TL175 Test Leads (1 pair)• AC175 Alligator Clips (1 pair)• C3003 3-compartment soft case & Information pack

Fluke Connect with ShareLive™ video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android™ (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.

Fluke 434 Energy MeterProduct Code: FLK-434

The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality. This energy monetization capability allows you to identify the most energy-wasteful areas of your facility so you can determine potential energy saving solutions.

Applications include Energy monetization, Energy assessment, Frontline troubleshooting, Predictive maintenance, Long-term analysis and Load studies.

Fluke 434 Energy Meter Features:• Energy loss calculator: Classic active and reactive power

measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.

• Troubleshoot real-time• Highest safety rating in the industry: 600 V CAT IV/1000

V CAT III rated for use at the service entrance.• Measure all three phases and neutral• Every measurement is automatically recorded• System-monitor: Ten power quality parameters on one

screen according to EN50160 power quality standard.• Logger function: Configure for any test condition with

memory for up to 600 parameters at user defined intervals.• View graphs and generate reports• Battery life: Seven hours operating time per charge on

Li-ion battery pack.

We supply the full range of Portable Power Meters in Ireland including Fluke Energy Meters, Fluke Power Quality Meters, Unipower Power Quality Meters, Gossen Metrawatt Power Quality Meters, Megger Power Quality Meters, and Extech Power Quality Meters.

FLUKE ENERGY METERS

We supply the full range of Fluke Energy Meters & Fluke Portable Energy Metering Equipment. We are the official Fluke distributor in Ireland.


Port

able

Pow

er M

eter

sPORTABLE POWER METERS

Fluke 1730 Features / Benefits:• Key measurements: voltage, current, power, power factor

and associated values enable energy saving strategies to be implemented.

• Bright, color touch screen• Comprehensive logging: all measured values are

automatically logged and can be reviewed during logging and before downloading for on the-go analysis.

• Optimized user interface• Complete in-the-field setup through the front panel: no

need to return to the workshop for download and setup.• Wide range power: power instrument directly from the

measured circuit eliminating the need to find a power outlet while allowing the instrument to be secured safely inside electrical panels.

• Two USB ports: one for PC connection and another for download to standard USB thumb drives or other USB devices.

• Compact size.• Highest safety rating in the industry: 600 V CAT IV/1000

V CAT III rated for use at the service entrance and downstream.

• Optimized measurement accessories: flat voltage cable and thin flexible current probes ensure easy installation even in tight spaces.

• Battery life: four-hour operating time (backup time) per charge on lithium-ion battery.

• Security: safeguard against theft with a Kensington lock.• All new, Energy Analyze application software: download,

analyze and automated reporting for a complete picture of energy saving potential.

Fluke 1730 Three Phase Electrical Energy LoggerProduct Code: FLK-1730

Find out where you are wasting energy, from the service entrance to individual circuits, optimize your facility’s energy use and reduce your bill with the Fluke 1730 Three Phase Electrical Energy Logger. The Fluke 1730 instrument is extremely easy to use; it even does automatic checks to guarantee that the user has connected the leads and current sensors up correctly.

Fluke 1730 Kit Contents:• 1730 Energy Logger• Power Supply• Voltage Test Lead• Dolphin Clip, Black• Set of three Thin-Flexi Current Probes, 30.5 cm• i1730-flex1500/3PK• Color-coded Wire Clips• Power Cord (see Figure 1)• Test lead with stackable plugs, 10 cm• Test lead with stackable plugs, 2 m• DC Power Cable• USB Cable A, Mini-USB• Soft Storage Bag/Case• Input Connector Decal• The power cord and input connector decal are country-

specific and vary according to the order destination.• Documentation Info Pack• 4 GB USB Flash Drive (includes User’s Manual)


Port

able

Pow

er M

eter


The Fluke 1735 Power Logger is a power meter that is used for conducting energy studies and basic power quality logging.The power quality meter measures most electrical power parameters, harmonics, and captures voltage events.

The Fluke 1735 Power Logger can be used to verify electrical system capacity before adding loads and quantify energy consumption before and after improvements to justify energy saving devices.

Fluke 1735 Power Logger Features:• Record power and associated parameters for up to 45 days• Monitor maximum power demand over user-defined

averaging periods• Prove the benefit of efficiency improvements with energy

consumption tests• Measure harmonic distortion caused by electronic loads• Improve reliability by capturing voltage dips and swells

from load switching• Easily confirm instrument setup with color display of

waveforms and trends• Measure all three phases and neutral with included 4

flexible current probes• View graphs and generate reports with included Power

Log software• Compact, rugged design with IP65 case, 600 V CAT III

and two-year warranty

Fluke 1735 Three Phase Power LoggerProduct Code: FLK-1735

Fluke 1735 Power Logger Kit Contents:• Soft carrying case• 4 flexible current probes (15 A/150 A/3000 A)• Power Log software• Voltage leads and clips• Color localization set• PC interface cable• International ac adapter (115/230 V, 50/60 Hz)• Printed manual• Multi-language manual CD

Applications include Load studies, Energy assessments, Harmonics measurements and Voltage event capture.


Port

able

Pow

er M

eter


FLUKE POWER QUALITY METERS

We supply the full range of Fluke Power Quality Meters, Quality Loggers, Power Quality Recorders, Power Quality & Energy Analyzers & Clamp Meters. We are the official Fluke distributor in Ireland.

Fluke VR1710 Single Phase Voltage Quality RecorderProduct Code: FLK-VR1710

The Fluke VR1710 Single Phase Voltage Quality Recorder is a plug-in voltage quality recorder that detects and records power quality problems. The VR1710 records power quality parameters including RMS average, transients, flicker, and harmonics up to the 32nd, using a user-selected average period from 1 seconds to 20 minutes.

Fluke VR1710 Features:• Fast and easy recording of voltage trends, dropouts, and

power quality• Plug directly into the mains power socket and capture

data• Continuous recording of all values with no gaps – both

events and voltage• Clear graphical summary & easy reporting of data and

quick overview of key power quality parameters – Take the guesswork out of diagnosing voltage quality problems

• Displays ctual transient display (>100 μs) with time stamp• Flicker recording to EN 61000-4-15• Includes PowerLog software package for quick download,

analysis, and automatic reporting

Fluke VR1710 Single Phase Voltage Quality Recorder Kit Contents:• Plug-in Fluke VR1710• USB Cable • PowerLog Software CD• Universal power cord adapters

Fluke 345 Power Quality Clamp MeterProduct Code: FLK-345

The Fluke 345 Power Quality Clamp Meter is a clamp on meter that is ideal for monitoring electronic loads. The Fluke 345 combines the functions of a clamp meter, oscilloscope, data logger and digital power meter. The Fluke 345 has a color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design. The Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit.

Fluke 345 Power Quality Clamp Meter Features:• Setup and troubleshoot variable frequency drives and

UPS systems• Uncover harmonic issues that can damage or disrupt

critical equipment• Inrush capture• Verify electrical system capacity before adding loads

Fluke 345 Power Quality Clamp Meter Kit Contents:• 345 Power Quality Clamp Meter• Soft carrying case• Power Log software• Test leads• Alligator clips• Test probes• USB cable• International ac adapter / battery eliminator• Printed English language user manual• Multi-language manual CD


Port

able

Pow

er M

eter


Fluke 43B Series Power Quality AnalyzerProduct Code: FLK-43B

The Fluke 43B Series Power Quality Analyzer easily identifies power quality problems such as circuit breakers that trip, transformers that overheat and motors that burn out. The Fluke 43B is optimised for industrial measurements on the 50 Hz fundamental frequency. It combines the capabilities of a power quality analyzer, a 20 MHz oscilloscope, a multimeter and data recorder into a single tool.

Fluke 43B Series Power Quality Analyzer Features:• Calculates three-phase power on balanced loads from a

single-phase measurement• Measures power harmonics, and captures voltage sags,

transients, and inrush currents• Monitoring functions help track intermittent problems

and power system performance• Menus use familiar electrical terminology• 20 measurement memories • FlukeView Software can log harmonics and other readings • Measures resistance, diode voltage drop, continuity and

capacitance• NIMH Battery provides operating time of 6.5 hours

Fluke 43B Series Power Quality Analyzer Kit Contents:• Fluke 61 IR Thermometer, VPS40 Voltage Probe• i400s AC Current Clamp (400 A)• AB200 Large Jaw Alligator Clips• C120 Hard Case, OC4USB Interface/Adapter Cable• SW43W FlukeView® Software for Windows + Power

Quality Video• TP1 Slim Reach Test Probe Set (flat blade)• AC20 Industrial Test Clips• BB120 Banana-to-BNC Adapter• BP120MH Ni-MH Battery Pack (installed)• PM 8907 Battery Charger/Line Voltage Adapter• TL24 Test Leads• TP4 Slim Reach Test Probe Set (4 mm)• Users Manual / Application Guide (CD-ROM)• Getting started booklet

Fluke 190 Series II ScopeMeterProduct Code: FLUKE_190_204_S

The Fluke 190 Series II ScopeMeter is a four- and two-channel scope built for CAT IV industrial environments. The Fluke 190 Series II ScopeMeter visually inspects signals amplitude, time, shape and disturbance or distortion characteristics.

The Fluke 190 Series II ScopeMeter includes a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands-free operation with Connect-and-View™ triggering.

Fluke 190 Series II Scopemeter Features:• Two or four electrically isolated inputs• CAT III 1000V / CAT IV 600V safety rated• Choose from 60 MHz, 100MHz or 200MHz bandwidth

models• Fast sampling rate, up to 2.5GS/s with up to 400 ps

resolution• Deep memory: 10,000 samples per channel waveform

capture so you can zoom in on the details• Dedicated 5000 Count digital multimeter in 2 Channel

models• Quad meter measurements via scope BNC inputs in 4

channel models• Connect-and-View continuous auto-trigger, single shot,

pulse width, and video triggering• ScopeRecord roll mode, capture waveform sample data

for up to 48 hours• TrendPlot, trend measurement readings for up to 22 days• Advanced automatic measurements, power (Vpwm, VA,

W, PF) and time (mAs, V/s, w/s)• IP-51 rated for dust and drip proof to withstand harsh

environments• Isolated USB ports for memory devices and PC

connectivity• Li-Ion battery for extended operating timespan• Charge spare battery using optional external battery

charger EBC290• Easy-access battery door to make it easy to swap batteries• Color ScopeMeter, 200 MHz, 4 channels plus DMM/Ext.

input, with SCC-290 kit included


Port

able

Pow

er M

eter


Fluke 435 Series Power Quality & Energy Analyzer Features:• Power inverter efficiency• Calculate the fiscal cost of energy waste due to poor

power quality• Quantify the before and after installation improvements

in energy consumption• Quickly diagnose problems on-screen to get your

operation back online• Detect and prevent power quality issues before they cause

downtime• Long-term analysis – uncover hard-to-find or intermittent

issues• Load studies – verify electrical system capacity before

adding loads• Simultaneously measure AC output power and DC input

power for power electronics systems using optional DC clamp.

• Capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).

• Energy loss calculator• Troubleshoot in real-time• Measure all three phases and neutral• Every measurement is always automatically recorded,

without any set-up• Ten power quality parameters on one screen according

to EN50160 power quality standard• Configure for any test condition with memory for up to

600 parameters at user defined intervals• View graphs and generate reports• Battery life has 7 hours operating time per charge on

Li-ion battery pack

Fluke 435 Series Power Quality & Energy AnalyzerProduct Code: FLK-435

The Fluke 435 Series Power Quality & Energy Analyzer offers advanced power quality functions and unprecedented energy analysis capabilities. It captures fast RMS values to see every waveform so you can determine how the voltage, current and frequency values are interacting.

Fluke 435 Series Kit Contents:• Three-Phase Power Quality and Energy Analyzer• BC430 Power Adapter, International plug adapter set• BP290 (Li-ion battery) 28 Wh (8 hours or more)• TL430 Test lead and Alligator clip set• WC100 color coding clips and regional decals• i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes• 8 GB SD card• PowerLog on CD (includes operator manuals in PDF format)• USB cable A – Mini B


Port

able

Pow

er M

eter


Fluke 1750 Three-Phase Power RecorderProduct Code: FLK-1750

The Fluke 1750 Three-Phase Power Recorder records three-phase power quality and monitors for power quality disturbances, with the help of included Fluke Power Analyze software. The Fluke 1750 Three-Phase Power Recorder is a power meter that automatically and continuously records every power quality parameter and event, on every cycle.

The Fluke 1750 Three-Phase Power Recorder uncovers hard-to-find issues, monitors critical equipment and captures power quality events to correlate with equipment malfunction:

Fluke 1750 Three-Phase Power Recorder• Quantify power quality throughout a facility• Benchmark: power system prior to install • Quick and reliable configuration using ARCHOS 43

Tablet• Swap channels internally with the wireless PDA or PC

when connections are not correct• Measure voltage and current on three phases, neutral,

and ground

Fluke 1750 Three-Phase Power Recorder Kit Contents:• 1750 acquisition unit + Power cord (intl.)• ARCHOS 43 Internet Tablet• 4 – 400A current probes (3140)• 5 Test leads and clips• SD memory card• Fluke Power View and Fluke Power Analyze software• Ethernet cable• Color localization set• Printed Getting Started manual• Product CD with software and user manual PDF• CS 1750/1760 Rugged transit softcase

Fluke 1740 Three-Phase Power Quality LoggerProduct Code: FLK-1740

The Fluke 1740 Series three-phase power quality loggers are everyday power meters for technicians who troubleshoot and analyze power quality issues. Capable of simultaneously logging up to 500 power parameters for up to 85 days and monitoring for events, these power loggers help uncover intermittent and hard-to-find power quality issues.

Fluke 1740 Three-Phase Power Quality Logger Features:• Uncover root cause of equipment malfunction for

predictive maintenance• Validate incoming power quality at the service entrance• Assess baseline power quality to validate compatibility

with critical systems before installation• Performa load studies• Performs energy and power quality assessment.• Quick set-up with automatic current probe detection• Compact, fully-insulated housing and accessories• Included PQ Log software quickly analyzes trends and

generates reports• Download data during recording without interruption• Measure voltage with premium accuracy: IEC61000-4-30

Class-A compliant voltage accuracy (0.1%)• Assess power quality according to EN50160 power quality

standard with statistical overview• Durable insulated case with 2 year warranty

Fluke 1740 Three-Phase Power Quality Logger Kit Contents:• 4 Flexible probes 15/150/1500/3000 A with 2 m cable• CD-ROM with PQ Log software• RS232 interface cable and RS232-USB adapter• Test leads for voltages and power supply• 4 black dolphin clips• Color localization kit• Carrying bag• Test certificate with measurement values• Printed English manual• Multi-language manual CD


Port

able

Pow

er M

eter


Fluke 1760 Three-Phase Power Quality Recorder Features:• High-speed transient analysis to uncover root causes of

equipment malfunction for predictive maintenance.• Class-A quality-of-service compliance• Event correlation at multiple locations• Galvanic separation and DC coupling – allows complete

measurements on dissimilar power systems• Power quality and power load studies• Conduct tests according to the stringent international

IEC 61000-4-30 Class-A standard• GPS time synchronization• Flexible and fully configurable thresholds and scale

factors• Uninterrupted power supply (40 minutes)• 10 MHz, 6000 Vpk waveform capture• 2 GB data memory• Comprehensive software included• Quick setup with automatic sensor detection.

Fluke 1760 Three-Phase Power Quality RecorderProduct Code: FLK-1760

The Fluke 1760 Three-Phase Power Quality Recorder is specifically designed for advanced power quality analysis and consistent compliance testing. The Fluke 1760 Three-Phase Power Quality Recorder is Class-A compliant to stand up to the most demanding of power quality tests.

The Fluke 1760 is used for the for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks. The Fluke 1760 Three-Phase Power Quality Recorder provides the flexibility to customise thresholds, algorithms, and measurement selections. The Fluke 1760 power recorder captures the most comprehensive details on user-selected parameters.

Fluke 1760 Three-Phase Power Quality Recorder Kit Contents: • Power Quality Recorder Topas• Internal Flash-memory 2 GB• PQ Analyze software on CD-ROM• Ethernet cable for network connection• Crosslink Ethernet cable for direct PC connection• Mains cable• Operational manuals• Carrying bag

If you have any queries on any of the above, please do not hesitate to email us at [email protected] with your query. Alternatively you can phone us and one of our experience technical support staff can deal with your query.


Port

able

Pow

er M

eter


Unipower Unilyzer 902 Power AnalyzerProduct Code: U902

The Unipower Unilyzer 902 Power Analyzer is a portable power analyser that records power quality measurements in out-of-the-control-room environments.

The Unilyzer 902 power analyzer is a dust- and splash-proof (IP65), norm-compliant (IEC 61000-4-30, Class A) and 3rd party-certified field instrument. Using DSP (Digital Signal Processor) the Unilyzer 902 measures all periods without time gaps. Built-in hardware locks to the fundamental frequency, which gives the Unilyzer 902 the highest possible accuracy.

Unilyzer 902 features options for remote communication, e.g. GSM modem. This means that data can be downloaded and re-configured from the office, without having to go to the location where it is installed. Four independent trig channels capture sags, swells, transients and interruptions. It can also connect to a PC, which provides access to an eight-channel oscilloscope, a harmonic spectrum analyser and a trend-graph. The phasor diagram gives valuable information about phase relationships and instrument wiring.

PQ Secure software accumulates all measured data which is transmitted to a main SQL database. Export data and measured files to other software, for instance spreadsheets.

Unipower Unilyzer 902 Power Analyzer Functions:• Automatic transducer identification• Quantities and units like V, A, W, VA, VAr, kWh, kVArh,

PF, Cosj, Hz, IFL, PST, PLT.• Transients >1 ms• Voltage sags (dips) and swells• Flicker• Harmonics. Odd, even, interharmonics and directions.• Current and voltage unbalance• Signalling voltage• K-factor for transformers• All power quality parameters measured simultaneouslyDirection for power harmonics and disturbance

Unipower Unilyzer 900 Power Network AnalyserProduct Code: Unilyzer 900 S-T

A challenge for power distribution companies is to maintain a stable voltage supply in the customer delivery point. Customer complaints are often based on unstable voltage conditions. This can be due to varying loads in the customer installation. The combination of load and network impedance must therefore be monitored to determine best solution.

The Unilyzer 900 is designed for electric power distribution companies to explore customer complaints but it can be used by anyone wanting to troubleshoot problems or to do optimisations in the power network.

The integrated wireless modem and router allows automatic, remote download of data as well as realtime analysis and configuration.

Unilyzer Unilyzer 900 Power Analyzer Features:• It’s small size with IP65 protection and ruggedness makes

Unilyzer 900 an idyllic tool for all field measurements.• No moving parts and has been tested in real, tough

environments. • Complies with IEC 61000-4-30 Class A for Power Quality

measurements.• Standard memory allows data to be stored for 5 months.

In case of a power failure it has an internal battery backup.• Gapless measurements and algorithms in accordance

with IEC 61000-4-30 Class A• Measures power and energy in all 3-phase Wye and Delta

configurations• Unique method for data compression and storage saving

memory usage and thus saving transfer times and costs• 170 days of measurements with 32 MB standard memory

UNIPOWER POWER QUALITY METERS

Powerpoint Engineering Ltd is the authorised distributor for Unipower in Ireland, supplying the full range of Unipower Power Quality Meters & Portable PQ Meters.


Port

able

Pow

er M

eter


Unipower UP-2210R Rack Mount PQ Measuring UnitProduct Code: UP-2210R

The Unipower UP-2210R Rack Mount PQ Measuring Unit is a IEC 61000 4 30 Class A Power Quality Analyzer and Fault Recorder targeted on MV and HV applications.

Unipower PQ Secure

PQ Secure lets you monitor your power quality continuously and gives you a complete picture of the status in the power network, logging all critical parameters giving direct response on any deviation.

UP 2210 R Comes in a convenient 19” case that fits easily in the sub-station control cabinets. The hardware is based on Unipowers class A platform and measures all Power Quality parameters, does fault recording and energy metering as well as advanced disturbance recording.

Unipower UP-2210 Power Quality Measure UnitProduct Code: UP-2210

The Unipower UP-2210 Power Quality Measure Unit functions as an advanced power quality meter and at the same time as a fault recorder.

The Unipower UP-2210 Power Quality Measure Unit are the nodes of which the PQ Secure system consists. For fully reliable data and reference measurements, each Unipower UP-2210 unit is certified in accordance with the measure standard IEC 61000-4-30, Class A.

The Unipower UP-2210 captures both steady state disturbances (harmonics, flicker etc) as well as rapid voltage changes (sag/swell events and fast transients). All power quality parameters can be analysed in accordance with voltage quality standards such as the EN 50 160.

Unipower PQ Secure system will automatically transfer data from the Unipower UP-2210 units to the central database, analyse the measure result and show an event list or graphical data. The software also has an automatic report generator that can create reports in accordance with international voltage standards such as EN 50160.

Unipower UP-2210 Power Quality Measure Unit Features:• Complies with EMC: EN 50081-1,2 EN 50082-1,2• Voltage characteristics: EN 50160, EN 61000-2-2, EN

61000-2-12• Harmonics: IEC 61000-4-7• Flicker: IEC 61000-4-15• Power quality measurement methods: IEC 61000-4-30,

Class A


Port

able

Pow

er M

eter


MAVOWATT 40 3-Phase Energy & Power Disturbance AnalyzerProduct Code: MAVOWATT 40

The Gossen Metrawatt MAVOWATT 40 3-Phase Energy & Power Disturbance Analyzer is a class A device that simultaneously monitors RMS values, harmonics, flicker and transients down to a time range of approximately 80 µs. It has 8 measuring channels: 4 for voltage and 4 for current.

Gossen Metrawatt MAVOWATT 40 Features:• Power and mains disturbance analysis• 8 measuring channels: 4 for voltage & 4 for current at 50

/ 60 Hz power frequency• Data storage to CompactFlash memory cards ≥4 GB


The Gossen Metrowatt MAVOWATT 50 is an energy and power disturbance analyzer that measures electrical quantities in DC systems, as well as in single and three-phase AC systems with any load. The MAVOWATT 50 features eight isolated measuring circuits – four each for voltage and current.

Gossen Metrawatt MAVOWATT 50 Features:• Complete power disturbance analysis with simultaneous

measurement of all relevant mains quantities• Power and energy analysis in power supply systems

MAVOWATT 20 3-Phase Energy & Power AnalyzerProduct Code: MAVOWATT 20 SET 1

The MAVOWATT 20 3-Phase Energy & Power Analyzer is used to interpret utility costs, improve efficiency, install energy savings devices, explore alternative energy solutions or even determine your carbon footprint.

Gossen Metrawatt MAVOWATT 20 Features:• Advanced Demand, Energy, Harmonics and Power Analysis • Automatic setup – No learning curve!• Easy to read colorful Demand & Energy reports• Carbon Footprint Calculator – Evaluate environmental impact• Intuitive color touch screen


The Gossen Metrawatt MAVOWATT 30 3-Phase Energy & Power Disturbance Analyzer is a power and mains disturbance analyzer that fulfills the standards EN50160, EN61000-4-7 and EN61000-4-15 and EN61000-4-30.

Gossen Metrawatt MAVOWATT 30 Features:• Power and mains disturbance analysis• Harmonic analysis per EN 61000-4-7• Built in accumulator for up to 3 hour operating time• High performance DranView PC analysis software

GOSSEN METRAWATT POWER QUALITY METERS

We supply the full range of Gossen Metrawatt Power Quality Meters & Portable PQ meters including the Gossen Metrawatt MAVOWATT Power Disturbance Analyzers & METRAHIT Digital Multimeters.


Port

able

Pow

er M

eter


METRAHIT ENERGY Digital MultimeterProduct Code: METRAHIT ENERGY

The Gossen Metrawatt METRAHIT ENERGY Digital Multimeter is a digital hand-held multimeter which takes a current and voltage measurement with a resolution of 60,000 counts.

Gossen Metrawatt Metrahit Energy Digital Multimeter Features:• TRMS measurement including: V AC TRMS, V AC+DC

TRMS with a bandwidth of 100 kHz, V DC, dB, Hz (V), Hz (A), Ω, μF, V Diodes, °C / F (TC / RTD)

• Power measurement (W, VAr, VA, PF): active, reactive and apparent power with extreme values, power factor

• Energy measurement (Wh, VArh, VAh), active, reactive and apparent energy, mean power value with adjustable observation period and maximum value

• Mains quality analysis: recording of over and undervoltage, dips, swells, voltage peaks and transients in 0, 50 and 60 Hz systems

• Harmonic analysis: RMS values and distortion components up to the 15th harmonic at 16.7, 50, 60 and 400 Hz

• Crest factor CF, conductivity nS, low resistance RSL, duty cycle %, cable length km

• Resolution of 60,000 counts• Triple display, display illumination can be activated under

difficult lighting conditions• 1 kHz / -3 dB low-pass filter can be activated• Direct current measurement from 10 nA to 10 A, 16

A intermittently, current measurement with current transformer clamp and sensors, transformation ratio is taken into account at the display

• Large data memory for up to 300,000 measured values• Instrument is completely remote controllable without

activating the rotary switch or changing current sockets


The Gossen Metrawatt MAVOWATT 70 3-Phase Energy & Power Disturbance Analyzer is a power and mains disturbance analyzer. The MAVOWATT 70 fulfills the standards EN50160, EN61000-4-7 and EN61000-4-15, as well as EN61000-4-30. It is a class A device that simultaneously monitors RMS values, harmonics, flicker and transients down to a time range of approximately 80 µs. The MAVOWATT 70 has 8 measuring channels: 4 for voltage and 4 for current.

Gossen Metrawatt MAVOWATT 70 Features:• Power and mains disturbance analysis• Harmonic analysis per EN 61000-4-7• Mains quality per EN50160 with statistic bar chart• Flicker analysis per EN 61000-4-15• Recording of switch-on effects and fault note• Integrated analysis module for the direction of the voltage

drop, switching tops of the power factor correction and the quality of motors

• Extended functionality of the power analysis• Measurement of fast transients with 1 MHz sampling rate• 8 measuring channels: 4 for voltage (differential) and 4

for current (current sensor), for measurements at 50 / 60 Hz power frequency

• Data storage to CompactFlash memory cards ≥4 GB• Power supply via charging device 90..264 V / 47..63 Hz• Built-in accumulator for up to 3 hour operating time• Optional RS232, USB or LAN interface• Optional current measuring accessories• High performance DranView PC analysis and evaluation

software is available• Special version for 50 / 60 Hz and 400 Hz mains frequency

– MAVOWATT70-400


Port

able

Pow

er M

eter


simultaneously. The recorded information can be viewed via the built-in graphics display, downloaded to a computer using the serial interface and optional modem, or transferred using the optional removable Flash Memory Module.

Megger offers a comprehensive line of self-powered (nobatteries required) flexible and clamp-on current probesfor use with the entire PA-9 Series. If you would prefer touse your own probes, simply order the applicable Meggeradapter

Megger PA9Plus Power Quality Analyser Features:• Designed to comply with all applicable IEC, IEEE, EN

Standards• Complies with CE marking• On-site analysis & data retrieval without a computer• Intelligent Download —Select only the data required• Trends Harmonics, THD & TDD• Provides real-time graphical display of individual

harmonic power• Includes AVO Metrosoft® software• Remote communications & alarm capabilities• CE marked and adheres to applicable European standards

(EN50160, IEC61000 series, IEEE1159, IEEE519)

MEGGER PA9Plus Power Quality AnalyserProduct Code: PA9 Plus

The Megger PA9Plus is the latest innovation of thesuccessful PA-9 Power Quality Analyzer platform. Itincorporates newly enhanced key features including afaster Digital Signal Processor (DSP) to support continuallyevolving capabilities, a full 12 MB of nonvolatile internalmemory and standard auxiliary power input capabilities.

To address worldwide requirements and applications, thePA9Plus is CE marked, supports several internationallanguages, and adheres to applicable European and NorthAmerican standards (EN50160, IEC61000-4-15, IEEE1159,IEEE519), including automatic phase lock loopsynchronization of input frequencies ranging from 20 Hzto 70 Hz, flicker measurements and recording, and out oflimits/frequency trending.

The optional removable memory capabilities allowsinternally recorded data to be copied directly to anexternal standard compact flash card using the sametechnology available with most of today’s digital cameras.

The standard software has been enhanced to fully supportthe new functionality and is included at no cost with everyPA9Plus purchased. A new, optional report generator hasalso been developed to support your customizeddocumentation/reporting needs.

The PA9Plus records power quality and power flow information

MEGGER POWER QUALITY METERS

Powerpoint Engineering Ltd is the authorised distributor of Megger in Ireland. We supply the latest Megger Power Quality Meters & Portable Power Quality Meters.


Port

able

Pow

er M

eter


Extech 3-Phase Power & Harmonics AnalyzerProduct Code: PQ3350/1, PQ3350/3

Power Measurements and Analysis + Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems plus datalogs to 52,428 single phase readings or 17,476 3-phase readings.

3-Phase Power & Harmonics Analyzer Features:• Two models to choose from:

Model PQ3350-1 (1200A 12” flexible current clamp probes) Model PQ3350-3 (3000A 24” flexible current clamp probes)

• Flexible clamp probes can be used for wrapping around bus bars and wire bundles

• Large backlighting LCD displays up to 35 parameters in one screen

• Clamp-on True RMS power measurements with on-screen Harmonics display

• Simultaneous display of Harmonics and Waveform• Display of Waveform with Peak Values (1024 samples/

period)• Analysis of Total Harmonic Distortion (THD-F)• Maximum Demand (MDkW, MW, kVA, MVA) with

programmable period• Adjustable CT ratio (1 to 3000) and VT ratio (1 to 600)• Graphic Phase diagram with 3-Phase system parameters• 3-phase Voltage or Current Unbalanced Ratio (VUR,

VIR) and Unbalanced Factor (d0%, d2%)• Calculated Unbalanced Current through Neutral Line (In)• Capture 28 Transient events (including Dip, Swell and

Outage) with programmable threshold (%)• Optically isolated USB interface with software to

download• Waveforms, Power Parameters and Harmonics

Extech PQ3450 3-Phase Power Analyzer/DataloggerProduct Code: PQ3450

The Extech PQ3450 3-Phase Power Analyzer/Datalogger is a datalogging power analyzer that can take up to 30,000 sets of measurements. The EXTECH PQ3450 saves data on an SD card in Excel format for easy transfer to a PC for analysis.

Extech PQ3450 Features:• Large dot-matrix, sun-readable, numerical, backlit LCD• Full system analysis with up to 35 parameters

- V (phase-to-phase), V (phase-to-ground) - A (phase-to-ground) - KW / KVA / KVAR / PF (phase) - KW / KVA / KVAR / PF (system) - KWH / KVAH / KVARH / PFH (system) - Phase angle

• Select 200A, 1200A Current Clamps or 3000A Flexible Current Probes (sold separately)

• Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems

• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format

• Wide sampling rate range (2 seconds to 2 hours)• Built-in Clock and Calendar• Easy-to-use onscreen menu• Easy-to-hold rugged over molded housing

EXTECH POWER QUALITY METERS

Powerpoing Engineering Ltd is the authorised distributor of Extech in Ireland. We supply a full range of Extech Power Quality Meters, Extech Power & Harmonics Analyzers, Clamp-on Meters & Test Leads.


Port

able

Pow

er M

eter


Extech 380801 Single Phase Power AnalyzerProduct Code: 380801

The Extech 380801 Single Phase Power Analyzer is a True RMS Single Phase Power Analyzer Appliance Tester/Power Analyzer.

The Extech 380801 is a compact, battery operated device for analyzing AC power loads with PC interface and datalogging. It can be used for data acquisition when connected to a PC.

Extech 380801 Features:• Four simultaneous displays of Watts, Power Factor or VA,

Voltage or Hz, Amps• True RMS Voltage & Current measurements of sine,

square, triangular and distorted wave forms with a crest factor < 5

• Max, Data Hold and Overload Protection• Battery or AC adaptor provides line isolation• Plug device to be tested directly into the Power Analyzer• Sampling (update) rate is 2.5 times/second• Windows® 95/98/NT/2000/XP/ME software allows user

to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correction

• Complete with Windows compatible software, cable, 8 x AA batteries, power cord, 117 VAC adaptor and case

Applications:• Measure and Audit power consumption of single phase

devices• Evaluate load performance under varying line conditions• Demonstrate effectiveness of power conservation efforts• Characterize device AC power requirements

Extech PQ3470 3-Phase Graphical Power & Harmonics AnalyzerProduct Code: PQ3470

The Extech PQ3470 3-Phase Graphical Power & Harmonics Analyzer is a power and harmonics analyzer, datalogging for up to 30,000 sets of measurements. The PQ3470 saves data on an SD card in Excel format for easy transfer to a PC for analysis.

Extech PQ3470 Features:• Large dot-matrix, sun-readable, graphical, backlit LCD• Full system analysis with up to 35 parameters

- V (phase-to-phase), V (phase-to-ground) - A (phase-to-ground) - KW / KVA / KVAR / PF (phase) - KW / KVA / KVAR / PF (system) - KWH / KVAH / KVARH / PFH (system) - Phase angle

• Select 200A, 1200A Current Clamps or 3000A Flexible Current Probes (sold separately)

• Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems

• On-screen Harmonics display (1 to 50th order)• Simultaneous display of Harmonics and Waveform• Display of Waveform with peak values• Analysis of Total Harmonic Distortion (THD)• Graphic Phase diagram with 3-Phase system parameters• 3-phase Voltage or Current Unbalanced Ratio (VUR,

AUR) and unbalanced factor• Capture Transient events (including dip, swell, and

outage) with programmable threshold (%)• Log up to 30,000 readings on a removable SD memory

card in Microsoft Excel® format• Wide sampling rate range (2 seconds to 2 hours)• Captured measurements can be imported directly into

Excel via the SD memory card


Port

able

Pow

er M

eter


Extech 380940 True RMS AC/DC Watt Clamp-on (400A)Product Code: 380940

The Extech 380940 True RMS AC/DC Watt Clamp-on is a 400A AC/DC Watt clamp-on meter that measures Watts, Current, and Voltage With AC/DC True Power measurements to 240kW.

Extech 380940 True Rms Ac/Dc Watt Clamp-On Features:• True RMS AC Voltage and Current• 0.9” (23mm) jaw opening• Large 4000 count LCD display• Fast 40 segment analog bargraph• Data Hold, Max/Min recall, Auto Zero (DC current), plus

low battery indication• Frequency to 10kHz• Auto power off• Complete with test leads, 2 AA batteries, and carrying case

Specifications: Range Resolution Accuracy ±(%rdg+digits)

Input Signal Range

AC Power 40kW 10W ±(1.5% + 3d)@50/60Hz

0-250V, 0-400A, PF 0-1

240kW 100W ±(1.5% + 3d)@50/60Hz

0-600V, 0-400A, PF 0-1

DC Power 40kW 10W ±(1.5% + 3d) 0-250V, 0-400A

240kW 100W ±(1.5% + 3d) 0-600V, 0-400A

AC Current 400A 0.1A ±(1.5% + 3d)@50/60Hz

Overload protection: 600A AC

(AC frequency range 40Hz-1kHz)

DC Current 400A 0.1A ±(1.5% + 3d) Overload protection: 600A DC

AC Voltage 600V 1V ±(1.5% + 2d)@50/60Hz

Overload protection: 800V AC

DC Voltage 400V 0.1V ±(1.0% + 2d) Overload protection: 800V DC

Frequency 10kHz 0.01-100Hz

±(0.8% + 2d) Overload protection: 600V AC

Dimensions 7.2 x 2.5 x 1.4” (183 x 64 x 36mm)

Weight 6.7oz (190g including batteries)

Extech 382091 3-Phase Power Analyzer/Datalogger (50 Hz,1000A)Product Code: 382091

The Extech 382091 3-Phase Power Analyzer/Datalogger is a 1000A 3-Phase Power Analyzer/Datalogger (50 Hz) with four clamps for power measurements on single phase, 3-phase/3-wire or 3-phase/4-wire systems. The EXTECH 382091 dispalys 10 parameters simultaneously.

Extech 382091 Features:• Large backlighting LCD displays 10 parameters

simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the 3 phases)

• Up to four current probes can be connected to the analyzer

• Clamp-on True RMS power measurements with software• for Harmonics analysis• Displays Active Power (kW), Apparent Power (kVA),

Reactive Power (kVAR) and Power Factor• Current measurements to 1000A and Voltage

measurements to 600V kWH, kVARh and kVAh energy measurements

• Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets

• Programmable Start/Stop datalogging times• PC interface with Windows® 95/98/NT/2000/ME/XP

compatible software for single and three phase voltage/current Waveform display and Harmonic analysis

• Phase sequence measurements• Auto power off with disable feature• CAT III-1000V, UL Listed; CE approved; 1yr warranty


Port

able

Pow

er M

eter


Extech 382096 3-Phase Power & Harmonics Analyzer (220V,1000A)Product Code: 382096

The Extech 382096 3-Phase Power & Harmonics Analyzer is a 1000A 3-Phase Power & Harmonics Analyzer for power measurements and analysis of single and 3-phase/3-wire or 3-phase/4-wire systems.

Extech 382096 Features:• Clamp-on True RMS power measurements with on-

screen Harmonics display (1-99th order)• Simultaneous display of Harmonics and Waveform• Display of Waveform with Peak Values (1024 samples/period)• Analysis of Total Harmonic Distortion (THD-F)• Displays Active Power (kW), Apparent Power (kVA),

Reactive Power (kVAR) and Power Factor• kWH and kVARh energy measurements• Maximum Demand (MDkW, MW, kVA, MVA) with

programmable period• Adjustable CT ratio (1 to 600) and VT ratio (1 to 3000)• Graphic Phase diagram with 3-Phase system parameters• 3-phase Voltage or Current Unbalanced Ratio (VUR,

VIR) and Unbalanced Factor (d0%, d2%)• Calculated Unbalanced Current through Neutral Line (In)• Datalogger records up to 52428 records in single

phase,(17476 records in 3-phase)• Capture 28 Transient events (including Dip, Swell and

Outage) with programmable threshold (%)• Optically isolated RS-232 interface with software to

download Waveforms, Power Parameters and Harmonics

Extech 382068 AC/DC Clamp-on Power Datalogger (1000A)Product Code: 382068

The Extech 382068 AC/DC Clamp-on Power Datalogger is 1000A AC/DC Clamp-on Power Datalogger Kit that datalogs up to 4000 readings. The EXTECH 382068 AC/DC Clamp-on Power Datalogger captures data and transfers to a PC for analysis and report generation.

Extech 382068 Features:• 1000A Clamp measures single f (phase) or 3f power to

600kW• Display True Power, Apparent Power, Power Factor, True

RMS Voltage and Current, Resistance and Frequency• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz• Clamp jaws open to 1.8” (46mm)• Built-in recorder datalogs up to 4000 readings or

download to a PC• 25 point data memory viewable on the LCD display• Data Hold and Auto power off• Full function display on large 4-digit LCD with fast 40

seg. bargraph, Peak Hold, and MIN/MAX• Complete with Clamp-on Meter, 9V battery, alligator

clips, test leads, Datalogger/RS-232 module, PC software with cable, and case

Extech PQ1000 Voltage Test LeadsProduct Code: PQ1000

The Extech PQ1000 Voltage Test Leads is a set of 4 test leads with alligator and plunger clips. These Test Leads are compatible with PQ3400 series of power analyzers.

If you have any queries on any of the above, please do not hesitate to email us at [email protected] with your query. Alternatively you can phone us and one of our experience staff can deal with your query.


Port

able

Pow

er M

eter


ELECTROCORDER ENERGY METERS

We supply a full range of Electrocorder Energy Meters, Electrocorder Multi-channel Voltage Logger, and Single to Multi-phase Voltage & Current Loggers. We are the authorised Electrocorder distributor in Ireland.

DC-3V Three Channel Voltage LoggerProduct Code: DC-3

The DC-3V is ideal for monitoring and recording one, two or three channels of DC voltages from 1Vdc to 300Vdc, for example from batteries, circuit breaker trip batteries, charging circuits, power supplies, photovoltaic (PV) cells, DC motor circuits, DC Generators, DC telecoms circuits… We can extend the range to 300Vdc if needed. Using appropriate transducers or signal conditioners, you can record many parameters, temperature, solar irradiation, wind speed.

DC-3V Three Channel Voltage Logger Features:• Ideal for industrial logging• Voltage Range: 60V or 300V• Voltage Accuracy: 1V – 5V < 2%, 60V model, 6V – 60V

< 1%. 300V model 60V – 300V ~2%• CAT Rating: CAT II• Recording Period: 1 sec to 60 mins• Recording Standard: Recording – EN50160: 1994• Environmental Sealing: IP43 as standard, available as

IP65/NEMA 12/4• Size & Weight: Metric – 260x180x190mm & 2kg

DC-3V Kit Contents:• 60V Data Logger• Unfused Voltage Input Leads• USB Lead• 12Vdc PSU• Electrosoft Software• Carry Case

CT-1A Single Phase Current LoggerProduct Code: CT-1A

The CT-1A Data Logger is used by householders, companies, facilities management, power management and optimisation companies to monitor loads from 0.1A to 100A, model dependent. It can be used for energy audits and the monitoring and logging of new low energy products, eg, LED lighting, low energy bulbs. It can be used to record earth leakage currents, providing the currents are over 0.1A.The current transformer breaks open, allowing it to be placed around the cable without having to break the main circuit.

CT-1A Single Phase Current Logger Features:• Ideal for industrial logging• Current Range: 10A, 50A or 100A• CTs fit around 30mm cables• Current Accuracy: ±2% of range, typically• Records true RMS Iavg, Imax & Imin• Recording Period: 1 sec to 60 mins• Recording Standard: Recording – EN50160: 1994• Environmental Sealing: IP65 as standard• Size & Weight: Metric – 126x75x45mm & 300g

CT-1A Kit Contents:• Data Logger• Voltage Input Lead• One Clamp-On CT• RS-232 Serial Lead• Electrosoft Software• Carry Case


Port

able

Pow

er M

eter


EC-1A Single Phase Current LoggerProduct Code: EC-1A

The EC-1A Data Logger is used by power distribution companies, facilities management, power management and optimisation companies to monitor loads from 5A to 10kA, model dependent. It can be used for energy audits and the monitoring and logging of new low energy products.

EC-3A Three Phase Current LoggerProduct Code: EC-3A

The EC-3A is used to determine feeder loading and mainly used by power distribution companies, heavy industry, facilities management, electrical or site services and maintenance engineers to monitor loading variations on site helping them to diagnose any related issues, transformer and feeder sizing problems.

EC-1A / EC-3A Phase Current Logger Features:• Enables current and load problems to be highlighted for

further investigation• Allows users to record load currents up to 10kAac / 3kAac

respectively, range is model dependent.• Recording Period: 1 sec to 60 mins• Records true RMS Iavg, Imax & Imin• Environmental Sealing: IP65 as standard

EC-3V Three Phase Voltage LoggerProduct Code: EC-3V

The EC-3V is used by power distribution companies, voltage and energy optimisation companies, facilities management, electrical or site services and maintenance engineers to monitor voltage variations on site helping them to diagnose any voltage related issues, or to gather data perhaps to make representations to their power supplier.

EC-2VA Single Phase Voltage & Current LoggerProduct Code: EC-2VA

The EC-2VA data logger is used by power distribution companies, facilities management, electrical or site services and maintenance engineers to monitor both voltage and current variations.

EC-3V / EC-2VA Single Phase Voltage & Current Logger Features: • Ideal for industrial logging• Voltage Range: 300Vrms• Current Range: 300A• Rogowski Coils fit around 140mm cables• Voltage Accuracy: ±2% of reading (10 bit) within 90Vac

– 300Vrms otherwise ±3%. (50/60Hz ±2%)• Current Accuracy: 2% of range, typically


Port

able

Pow

er M

eter


EC-7VAR Three Phase Voltage, Current & Power Factor Data LoggerProduct Code: EC-7VAR

The EC-7VAR PQA is used by electrical contractors, power distribution companies, facilities management, electrical or site-services and maintenance engineers. It is used to monitor power (kW)/energy (kWh) usage, check voltage and current variations helping them to diagnose any related issues, or to gather data perhaps to make representations to their power supplier.

Widely used for UPS sizing and monitoring and standby generator sizing and monitoring. As the product records both voltage and current, users can determine if low voltage is related to high current demands on site, or if the low voltage is being supplied to the site.

Setting up the Electrocorder EC-7VAR is easy, suitable fornon-technical staff. Using the supplied (free) Windows software, Electrosoft; input the location details for the logging and choose the logging period. Electrosoft will print the necessary dispatch/return documentation including user instructions. All data is included in a database of dispatches and returns, allowing you to track the location of multiple loggers.

EC-7VAR Kit Contents:• Data Logger• Rogowski Transducers• Voltage Leads• USB Lead• Electrosoft Software• Carry Case

The EC-7VAR is specifically designed to monitor one, two orthree current channels, as well as one, two or three voltagechannels plus Power Factor. Power Factor recorded is the phase angle between L1 and A1.

EC-7VAR Three Phase Voltage, Current & Power Factor Data Logger Features: • Ideal for industrial logging PQA• Voltage Range: 500Vac• Current Range: 400A, 1kA, 2kA or 3kAac• Rogowski Coils fit around 140mm cables• Voltage Accuracy: ±1% of reading, ±1 Volt. (10 bit) within

100Vac-450Vrms (ph–ph); else ±3%. (50/60Hz ±2%)• Current Accuracy: ±2% of reading, typically (within 10%

– 90% of full scale), otherwise 3% of full scale• Power Factor Accuracy: Accurate to ~3% between lead

0.5 and 0.5 lag; ~6% between 0.5 and 0.3 lead or lag• CAT Rating: 1000V CAT III, 600V CAT IV• Records true RMS Vavg, Vmax & Vmin to 2%• Records true RMS Iavg, Imax & Imin to 5%• Recording Period: 2 sec to 60 mins• Recording Standard: EN50160: 1994• Environmental Sealing: IP43 as standard, available as

IP65/NEMA 12/4• Size & Weight: Metric – 260x180x190mm & 2kg



Mea

suri

ng T

rans

duce

rs

Sineax M563 3-Phase Transducers (Programmable)Product Code: M563

The Sineax M563 3-Phase Transducer is a programmable multi-funtion transducer with 3 analog out and RS232. The Sineax M563 is used for simultaneously acquiring 3 freely selectable measured quantities in electrical systems. It is equipped with 3 electrically isolated current outputs.

Sineax M563 3-Phase Transducer Features:• 3 analogue outputs• 100 to 693 V (phase to phase) programmable• High accuracy: class 0.5• Software with password protection

MEASURING TRANSDUCERS

We supply the full range of Gossen Metrawatt Sineax Measuring Transducers, Multifunction Meters & display units. We are authorised distributors for Gossen Metrawatt in Ireland.

SINEAX VOLTAGE TRANSDUCERS

Sineax U553 Single Phase Measuring TransducerProduct Code: U553

The Sineax U553 Transducer converts a sinusoidal or a distorted AC voltage into a load independent DC current or a load independent DC voltage proportional to the measured value.

The transducer fulfils all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001. The SINEAX U553 is supplied with power supply terminal.

Sineax U553 Single Phase Measuring Transducer Features:• Measurement method: logarithmic process• Measurement input: alternating voltage, sinusoidal or

distorted, true RMS value measurement• Nominal input voltage: 0…20 to 0…690 V• Measurement output: unipolar and live-zero

PROGRAMMABLE TRANSDUCERS

Paladin Advantage Universal Programmable TransducerProduct Code: 254-XZZ

The Paladin Advantage, 254-XZZ, is a programmable transducer which provides measurement isolation and conversion of all main electrical parameters into an industry standard DC output signal. The 254-XZZ can be used in single and three-phase balanced or unbalanced three or four-wire electrical systems. The 254-XZZ has an accuracy of CL0.2 and includes RS485 Modbus RTU communications protocol and pulse/alarm output as standard.

Paladin Advantage Universal Programmable Transducer Features:• DIN-rail enclosure• Measurement, isolation and conversion of up to 4

parameters• RS485 Modbus RTU protocol• Alarm/pulsed output• Programmable VT/CT ratio• True rms measurement


Mea

suri

ng T

rans

duce

rsMEASURING TRANSDUCERS

Sineax DME 400, 401, 406 3-Phase Transducers (Programmable)Product Code: DME 400, DME 401, DME 406

The Sineax DME 4 series of multi-transducers simultaneously measure several variables of an electrical power system and process them to produce 2 resp. 4 analogue output signals. 2 or 4 digital outputs are available for signalling limits or energy metering. The multi-transducers are also equipped with an RS 232 serial interface to which a PC with the corresponding software can be connected for programming or accessing and executing useful ancillary functions.

The usual modes of connection, the types of measured variables, their ratings, the transfer characteristic for each output etc. are the main parameters that have to be programmed. Ancillary functions include a power system check, provision for displaying the measured variable on a PC monitor, the simulation of the output for test purposes and a facility for printing nameplates. The transducer fulfils all the essential requirements and regulations concerning electromagnetic compatibility (EMC) and safety. It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001

Sineax DME 400 Sineax DME 401 Sineax DME 406• LONWORKS Interface• Simultaneous measurement• Input Voltage: up to 693V• High Accuracy: U/I/P 0.2%• Up to 4 integrated energy meters• Software with Password Protection

• MODBUS Interface of Data Transfer• Simultaneous measurement• Input Voltage: up to 693V• High Accuracy: 0.2% • Software with Password Protection• Provision for Snap to Top-hat rails

• PROFIBUS-DP or RS232 Interface• Simultaneous measurement• Mean Values: Various Functions• Accuracy Class 0.2• Software with Password Protection• Adjustable conversion factor

Sineax DME 424 / 442 3-Phase Transducer (Programmable)Product Code: DME 424, DME 442

The Sineax DME 424 / 442 3-Phase Transducer is a programmable multi-transducer for simultaneously acquiring several quantities in heavy current systems. The output quantities of the analog outputs can be configured as load-independent direct current or direct voltage signals.

Sineax DME 424 / 442 3-Phase Transducer Features:• Simultaneous measurement of several variables• Up to 6 outputs (2A + 4D or 4A + 2D)• Input voltage: up to 693 V• Universal analogue outputs (programmable)• High accuracy: U/I/ 0.2% and P 0.25%• Universal digital outputs (meter transmitter, limits)• Up to 2 or 4 integrated energy meters• Software with Password Protection • AC/DC power supply / universal• Option to either snap the transducer onto top-hat rails or secure it with screws to a wall or panel


Mea

suri

ng T

rans

duce

rs MEASURING TRANSDUCERS

Sineax A200 Multifunctional Display UnitProduct Code: A200

The Gossen Metrawatt Sineax A200 is a multifucntional display unit for use with the Sineax DME4 multi-transducers.

The Sineax A200 displays all measurands and meter contents of any DME4. The display unit is connected to the transducer via a simple RS232 interface cable, no more hot input wires at the cabinet door. By means of the direct connection to the transducer a first class accuracy of 0.15% (V, I) rsp. 0.2% (power and meter data) is guaranteed.

Sineax A200 Multifunctional Display Unit Features:• Replaces numerous analog instruments• Displays all DME 4 measurands locally, also for pure bus

devices• Easy connection via RS232 cable• Dimensions 96 x 96 mm

Sineax DME 440 3-Phase Transducer (Programmable)Product Code: DME 440

The Sineax DME 440 3-Phase Transducer is a programmable multi-functional transducer with 4 energy meters, 4 analog out, RS232, RS485-MODBUS. The DME 440 is used to simultaneously acquire several quantities in heavy current systems and processes them into 4 analog output quantities. The MODBUS interface allows for querying up to 47 measured quantities.

Sineax DME 440 3-Phase Transducer Features:• 4 analog outputs, 4 programmable energy meters for Ah,

kVAh, kWh and kvarh• Programmable application (type of electrical system)• Current to 10 A, voltage to 830 V• Programmable universal analog outputs• Accuracy: U / I 0.2 %, P 0.25 % under reference conditions• Password protected software for programming, data

analysis and simulation• AC-DC power pack with large tolerance range• SINEAX housing: top-hat rail or wall mounting

SINEAX FREQUENCY TRANSDUCERS

Sineax F534 Single Phase Measuring TransducerProduct Code: SINEAX F534

The Sineax F534 Single Phase Measuring Transducer is a measuring transducer for frequency. The Sineax F534 is used for the conversion of frequency into a direct current or voltage signal, which is proportional to the measured value.

Sineax F534 Single Phase Measuring Transducer Features:• Measurement input for sinusoidal, square-wave or distorted nominal input voltage with dominant fundamental wave• Input voltage: 10 to 690 V, Measuring range limits 10 Hz to 1.5 kHz• Auxiliary power: 85 to 230 V AC/DC, Input frequency response time periods: 4• Measurement output available with unipolar, bipolar or live-zero output quantities• Measuring method: digital period of oscillation measurement• Power supply: integrated AC-DC power pack with large tolerance range for universal use• Standard GL (Germanischer Lloyd) / suitable for use on ocean-going vessels• Sineax housing: P13/70 housing for top-hat rail mounting• Eurax housing: plug-in module (7 standard width units) for 19” rack


Mea

suri

ng T

rans

duce


SINEAX CURRENT TRANSDUCERS

Sineax i552 Single Phase Measuring TransducerProduct Code: I552

The Sineax i552 Single Phase Measuring Transducers is an AC current transducer for effective value measurement. The Sineax i552 Single Phase Measuring Transducer is a measuring transducer for the transformation of sinusoidal or distorted alternating current, with power supply terminal.

Sineax I552 Single Phase Measuring Transducer Features:

• Measurement method: Logarithmic process• Measurement input: alternating current, sinusoidal or distorted, true RMS value measurement• Measuring range: 1/5 A or 1.2/6 A selectable at terminals• Measurement output: unipolar and live-zero• 0…1.0 to 0…20 mA resp. live-zero 0.2…1 to 4…20 mA or• 0…1 to 0…10 V resp. live-zero 0.2…1 to 2…10 V• Power supply: wide DC, AC power pack tolerance• Standard as marine version per Lloyd’s Register of Shipping• P13/70 housing for top-hat rail mounting• CSA certificate , German Lloyd approval

SINEAX POWER TRANSDUCERS

Sineax G536 Single Phase Measuring TransducerProduct Code: G536

The Sineax G536 Single Phase Measuring Transducer is a measuring transducer for phase angle/power factor. The Sineax G536 Single Phase Measuring Transducer is used for the measurement of phase angle or power factor in single-phase or 3-phase electrical systems with symmetrical load.

Sineax G536 Single Phase Measuring Transducer Features:

• Measurement input for sinusoidal, square-wave or distorted nominal input voltage with dominant fundamental wave• Input voltage: 10 to 690 V / Input current: 0.5 to 6 A• Nominal input frequency: 50 Hz / Output: cosp linear• Auxiliary power: 85 to 230 V AC/DC• Input frequency response time periods: 4• Measuring range (for import): 0.5.. cap.. 1 .. ind .. 0.5 cosp linear• Measuring range limits: min. span 20 °el, max. span 360 °el• Measurement output : Unipolar, bipolar or live-zero quantities• Measuring method: acquires distance between zero-crossings• Power supply: integrated AC-DC power pack


Mea

suri

ng T

rans

duce

rs MEASURING TRANSDUCERS

Sineax Q531 Three Phase Measuring TransducerProduct Code: Q531

The Sineax Q531 Three-Phase Transducer is used for the conversion of reactive power in single phase alternating current or three-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured reactive power value.

Sineax P530 Three Phase Measuring TransducerProduct Code: P530

The Sineax P530 three-Phase Measuring Transducer is a measuring transducer for active power in single phase alternating current or three-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured active power value.

Sineax P530/Q531 Three-Phase Transducer Features:• Measuring method: TDM method• Measurement inputs: sinusoidal nominal input current (1 or 5 A) and nominal input voltage (100 to 690 V)• Nominal input frequency: 50 Hz• Measuring range: 0 to 2 kVar• Measurement output: unipolar, bipolar or live-zero output quantities• Power supply: integrated AC-DC power pack with large tolerance range for universal use• Standard GL (Germanischer Lloyd) / suitable for use on ocean-going vessels• Housings - top-hat rail mounting

P13/70 housing for phase-phase alternating current P18/105 housing for 3-phase current

• CSA certificate , German Lloyd approval

EMMOD201 Multifunction Power Measuring InstrumentProduct Code: EMMOD201

The Gossen Metrawatt EMMOD201 features Modbus, Data Storage, RS 232 / 485 Interface and synchronizing input. The Gossen Metrawatt EMMOD201 allows for the exchange of data with a control system via MODBUS RTU, and can be retrofitted without tampering with the basic device. A200 software is required for programming the basic A2xx device and b with a PC, and for reading and selecting values from data storage.

EMMOD201 Multifunction Power Measuring Instrument Features:• Protocol: Modbus RTU for SCADA & Interface: R S232 / 485, switchable• Synchronizing input: Pulse for logger or Peak/Off-Peak tariff switching• Baud rate: 1200, 2400, 4800, 9600, 19.2 k & Data storage with A210 / A220


Mea

suri

ng T

rans

duce


SINEAX POWER TRANSDUCERS

Sineax A210, A220, A230 Multifunctional Power Monitors With System AnalysisProduct Code: A210, A220, A230

The new Sineax A series Multifunctional Power Monitor is used for the measurement and display of all values of a 3-phase current system. The Sineax A series Multifunction Power Measuring Instrument comes complete with with System Analysis, featuring Single phase, 3/4 wire balanced, 3/4 wire unbalanced connection types, and spring clamps or screw clamps terminals.

Sineax A210, A220, A230 Features:

• Rational and economic measurement - 48 measurands, 8 energy meters, average and max./min. value functions. The electrical system can be comprehensively assessed in all 4 quadrants.

• Displays - The measurands are displayed by high-contrast, 14 mm high, dimmable LEDs with 3 digits and sign (energy meters 8 digits, frequency 4 digits).

• Meters - The integrated energy meters record active energy (incoming/outgoing) and reactive energy (inductive/capacitive). If the digital input of the extension module is used for switching the tariff, the number of active meters is doubled.

• Outputs - There are 2 S0 outputs that can be used for controlling relays. Energy impulses or as an alternative, the status of the programmable limits can be output.

In addition to the features of the Sineax A210 and Sineax A220, the Sineax A230 power monitoring device provides functions for system and load analysis. The system and load analysis is done by measurement of harmonics, THD, asymmetry, comprehensive average and max/min values. The dimensions of the Sineax A230 Multifunctional Power Monitor are 144 x 144 x 46 mm. It is designed for application in high, medium and low voltage systems. Any current and voltage transformers are taken into account in the calculation of the measured values. The Sineax A230 also features Clip-on extension module with average value and load profile recording, RS-232/485 interface, MODBUS, synchronizing input, switchover of high/low tariffs. Single-phase 3L balanced/unbalanced (Aron, Full), 4L balanced/unbalanced (Open-Y, Full)


Sineax A210 Sineax A220 Sineax A230• Front Dimensions: 96 x 96 mm• Measurands: 85• Mean Values: 5 P, Q and S mean

values each• THD: No• Harmonic Analysis: No• Voltage Unbalance: No

• Front Dimensions: 144 x 144 mm• Measurands: 85• Mean Values: 5 P, Q and S mean

values each• THD: No• Harmonic Analysis: No• Voltage Unbalance: No

• Front Dimensions: 144 x 144 mm• Measurands: 266• Mean Values: Various Functions• THD: Yes• Harmonic Analysis: Up to the 15th

Harmonic• Voltage Unbalance: Yes


CURRENT TRANSFORMERS

We supply the full range of Current Transformers - Split Core CTs, Cable-through CTs, Bar or Cable-through CTs, Primary Wound Moulded Case CTs and Bar-through CTs. View all these and more on our dedicated website www.powermeters.ie

Miniature Split Core Current TransformersProduct Code: MSC1 / MSC2 / MSC3

A range of miniature split core current transformers that offers a cost effective and efficient method by which the current can be measured without the need to break the conductor, each current transformer is supplied with colour coded leads of up to 3 meters for connection to the monitoring device. The MSC range of current transformers offers primary currents between 60-500A with 1 or 5A secondaries with class 1 accuracy performance. (Class 3 for 60-80A range).

SPLIT CORE CURRENT TRANSFORMER

We supply the full range of Split Core CTs (Current Transformers) from Crompton Instruments.

MSC3• Ratio: 300/1 - 500/5• Class: 1• Burden: 1.5 - 2.5• Aperture: 28mm• Lead Length: 1m / 3m• Case: Size 3• Dimensions: 71.7, 44.5, 62.2

MSC2• Ratio: 100/1 to 250/5• Class: 1• Burden VA: 1• Aperture: 18mm• Lead Length: 1m / 3m• Case: Size 2• Dimensions: 72.7, 44.5, 61.5

MSC1• Ratio: 60/1 - 100/1• Class: 3 / 1• Burden: 0.1 - 0.2• Aperture: 18mm• Lead Length: 3m• Case: Size 1• Dimensions: 57.3, 31, 53

BAR OR CABLE-THROUGH CURRENT TRANSFORMER

We supply the full range of Bar or Cable-through CTs (Current Transformers) from Crompton Instruments.

TBA / TCA / TCB / TRB Current Transformer – 50 to 600AProduct Code: 192TBA, 192TCA, 192TCB, 192TRB

Current Transformer Features:• Class 1 and Class 0.5 Accuracy• Insulation class E (120ºC)• Max case temperature 70ºC• Test Voltage 3KV 50 Hz 1 min• Case material: Polycarbonate• Fixed screw mounting or Din-Rail mounting• Approved to IEC60044.1


Cur

rent

Tra

nsfo

rmer

sCURRENT TRANSFORMERS

Single Phase Moulded Case Current TransformersProduct Code: M53J / M53Q / M63N / M93R

The range of Crompton Instruments current transformers offers wide system current ratings, apertures, busbar and case sizes to suit every application. Manufactured to meet EN60044 the range benefits include ratio rating from 1/5 to 6000/5, accuracy up to Class 0.5, integral terminal cover for safety and multiple mounting options.

Single Phase Moulded Case Current Transformers Features & Benefits:• CT ratios from 1A to 6000A with 5A and 1A secondaries • Accuracy up to Class 0.5• Integral terminal cover • High impact, flame retardant moulded case• Busbar, DIN-rail or foot mounting options • Wide range of apertures and case sizes• Reduction of high currents for ease of metering • Long product life

M53J• Case Size (WxDxH):

50mm wide x 30mm deep x 80mm high

• Aperture: 30 x 10mm, 25mm diameter

• Weight: 0.22Kg

M53Q• Case Size (WxDxH):


• Aperture: 20 x 6mm 21mm diameter

• Weight: 0.25Kg

M63N• Case Size (WxDxH):


• Aperture: 40 x 10mm 32mm diameter

• Weight: 0.3Kg

M93R• Case Size (WxDxH):


• Aperture: 64 x 12.6mm 60 x 30mm

• Weight: 0.6Kg

Three Phase Current TransformerProduct Code: M3N1

A range of 3-in-1 current transformers combine three traditional current transformers in one moulded case. 3-in-1 current transformers can be directly installed next to a three-phase moulded case circuit breaker, thus saving installation time where fitting three standard individual current transformers would be required. The M3N1 range of current transformers offers primary currents between 60-630A with 5A secondaries with up to class 0.5 accuracy performance.

Three Phase Current Transformer Features & Benefits:• Cost effective three-phase moulded case• Ratio’s ranging from 60/5 to 630/5• Integrated wire sealable terminal cover• Busbar, DIN-rail hardware supplied• Metal feet mounting hardware supplied• Combined M4 posi/slot screw Benefits• Isolated output for safety• Ex-stock delivery


METERING SOFTWARE

Socomec Control Vision SoftwareProduct Code: 4805 0000

Socomec Control Vision Software is a software package that processes data read by the Socomec Diris Am, A20, A40, A41, Ap, M, Mh, C , CC, CM, CMv2 measurement units and COUNTIS Ci pulse concentrators.

Socomec Control Vision Software operates in a Windows XP Service pack 3 or VISTA environment. The minimum configuration required is a PC with a minimum 1.0 GHz processor, RAM 512 MB, at least 500 MB space available on the hard disk and a screen with minimum resolution 1024×768. Communication with the devices can either be directly via Ethernet, or via a serial or USB port on the computer.

We supply energy metering system software from all leading brands: Socomec Energy Metering Software, Unipower PQ Secure Software & DIEHL Hydrometer Energy Metering Systems.

SOCOMEC ENERGY METERING SOFTWARE

We supply Socomec Energy Metering Software and metering systems. Socomec Control Vision Software is a software package that processes data read by the Socomec Diris & Countis panel mount energy meters.

Unipower PQ Secure SoftwareProduct Code: PQSecure

The Unipower PQ Secure Software is a user-friendly software system used for the supervision of power quality and disturbances in the power grid. Unipower PQ Secure Software provides continuous monitoring of all the power quality parameters in the entire network, providing quick and easy tracing of different disturbances and determination of their direction in the network.

Unipower PQ Secure Software Analysis Features:

• Event viewers (global/local)• Trend diagrams• Wave form diagrams• Duration analysis (ITIC/CBEMA)• Automatic report function• Real-time window

The Software consists of software, measure units, and communication equipment via e.g. ethernet or a modem. It is also possible to integrate the portable meters Unilyzer 902 and Unilyzer 901 into the PQ Secure system, giving more points for measurement and improved view of power quality.

UNIPOWER PQ SECURE SOFTWARE

We supply the Unipower power quality monitoring system software, PQ Secure. Unipower PQ Secure Software provides continuous monitoring of all the power quality parameters in the entire network, providing quick and easy tracing.


Met

erin

g So

ftw

areMETERING SOFTWARE

DIEHL Izar@Net Hydrometer SoftwareProduct Code: IZAR@NET_1000

DIEHL Izar@Net Hydrometer Software is an energy data management software that performs automatic readings of M-Bus and Fixed radio networks. DIEHL Izar@Net Hydrometer Software features various modules that makes it possible to adapt the software to the user’s specific requirements.

DIEHL HYDROMETER ENERGY METERING SYSTEMS

We supply DIEHL Hydrometer Energy Metering Systems & software. Izar@Net Hydrometer Software is an energy data management software that performs automatic readings of M-Bus and Fixed radio networks.

DIEHL Izar@net Hydrometer Software Features:

• One software for managing radio and wired M-Bus reading systems

• Reading and remote reading of all types of resource meters (water, thermal energy, electricity, gas meters)

• Editing and visualisation of meter data in tables and diagrams

• Archiving of all meter data in a powerful Oracle® SQL database

• Optional use of modern client-server structure enabling simultaneous use

• Possibility of alarm monitoring and actions

DIEHL IZAR@NET Hydrometer Basic Modules

IZAR@NET Walk & DriveSupports direct USB connection to a IZAR HANDHELD PSION device and the organisation of Walk-by/Drive-by tours for reading/management of radio meters and customer data.

IZAR@NET FixedSupports data download from an FTP server that was uploaded via Ethernet LAN or GPRS from a fixed installed data concentrator (IZAR RECEIVER LAN/GPRS or M-Bus Master IZAR CENTER).

IZAR@NET M-BusSupports direct connection via USB, RS232, Ethernet LAN or analog/GSM modem connection to an IZAR CENTER M-Bus master. Possibility to do on demand meter readings or readout of IZAR CENTER Memory data.

DIEHL IZAR@NET Hydrometer Additional Modules:

Izar@net Graphic & AnalysisConsumption monitoring: illustration of up to 6 meter counts in a bar or line graph diagram. 3 diagrams can be displayed in one window (also with the possibility of an online mode).

IZAR@NET AlarmAutomatic creation of meter alarms for Fixed Network and M-Bus installations, visualisation on screen or transmission via SMS / email.

IZAR@NET MapsVisualisation of readings on a map (Requirement: Google Earth® installed).

IZAR@NET Import/ExportInterface for import and export of meter and customer data e.g. from/to a billing software system (ASCII, Excel®, ODBC database connection).

IZAR@NET Virtual MetersCalculations of virtual meter values (e.g. summarize all sub meters from one building).

IZAR@NET Extended DatabaseExtension of limited (4 GB) Oracle® Express Edition (incl. in IZAR@NET) to unlimited Oracle® Standard Edition One database. Allows additionally a higher database performance.


ACCESSORIES

We supply a wide range of Power Quality & Energy Monitoring accessories such Test Leads, Flexible Current Clamps, Extension Test Lead Reels and Test Lead Adaptors. As authorised distributors in Ireland, we supply products from all the major brands- Fluke, Unipower, Socomec, Extech & Gossen Metrawatt.

Kewtech KEW 8112 Clamp AdaptorProduct Code: KEW8112

The Kewtech KEW 8112 Clamp Adaptor Popular adaptor for accurate range of current readings in connection with your DMM. The Kewtech KEW 8112 Clamp Adaptor is used to measure current from 0.1mA to 120A AC.

Kewtech KEW 8112 Clamp Adaptor Features:• Measures current from 0.1mA to 120A AC• Small 8mm jaw• Complies to IEC61010-1 CAT. II 100V pollution degree 2

FLEXIBLE CURRENT CLAMPS

Fluke i3000s AC Current ClampProduct Code: FLUKE I3000S FLEX_24

Fluke i3000s AC Current Clamp Features:• Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A

output• Ideal for current measurement on thick and hard to reach

conductors without breaking the circuit• Maximum conductor diameter 178 mm (7 in.)• CAT III 600 V safety rating

EXTENSION TEST LEAD REELS

Megger ETL30/ETL50 Extension Test LeadProduct Code: ETL30, ETL50

The Megger ETL30/ETL50 Extension Test Lead Reel is a compact extension test lead for direct R2 measurements so eliminating the need for crossover connections and R1 + R2 measurements. The small and light design is easy to carry and use.

Megger ETL30/ETL50 Extension Lead Reel Features:• Suitable for direct R2 measurement• Easy re-wind of cable with tangle-free cable guide• Tough, compact and light design• 30 metres (ETL30) / 50 meters (ETL50)

Fluke TL223 SureGrip Electrical Test Lead KitProduct Code: FLUKE TL223

Fluke TL223 SureGrip Electrical Test Lead Kit Contents:• AC220 SureGrip™ Alligator Clip Set• TP1 Slim-Reach™ Test Probes (flat bladed)• TL224 SureGrip™ Silicone Test Lead Set (straight to right)

TEST LEADS


MORE ABOUT US

Powerpoint Engineering Limited is a leading supplier of Electrical Test Instruments, Electrical Safety Equipment, Energy Monitoring Equipment, Power Cable Accessories, Substation Safety Equipment, Arc Flash Clothing, PAT Testers, Thermal Imaging Cameras and Lockout Tagout.

For each of the different business divisions, the company is the authorised distributor in Ireland for the leading manufacturers – our agencies include Megger, Master Lock, Brady, Fluke, Seaward, Klauke, Raychem, 3M, FLIR, CATU, Unipower, Gossen Metrawatt, Sineax, Pfisterer, Regeltex, Honeywell, Extech, Electrocorder and Sofamel.

In addition to this, we provide various specialist electrical services and reports. These services are performed by our own experienced staff who are the industry experts in these specialist areas. We are also the industry leaders in providing a range of specialised training courses. These include PAT Training, Thermal Imaging Training, ATEX Safety Awareness Training, Lockout Tagout Safety Awareness Training and Electrical Appreciation Training.

The company ethos is very much focused on you, the customer and providing you with the best possible products, services, advice and support. To help you find all that we offer, we have set out below our different business divisions and the relevant dedicated website where you can obtain all the necessary information:

PRODUCTS

Electrical Test Instruments www.powerpoint-engineering.com Electrical Safety Equipment www.powerpoint-engineering.com Substation Safety Equipment www.substation-safety.com Arc Flash Protection www.substation-safety.com PAT Testers www.pat-testers.ie Thermal Imaging Cameras www.thermalimagers.ie Energy Monitoring Equipment www.powermeters.ie Power Cable Accessories www.powerpoint-engineering.com Tooling www.powerpoint-engineering.com Lockout Tagout Equipment www.lockoutsafety.com

SERVICES

Substation Safety Survey www.substation-safety.com ATEX Site Safety Services www.atexprotection.com In-House Calibration & Repair Service www.calibrationlab.ie Partial Discharge Testing www.powerpoint-engineering.com Transformer Oil Testing www.powerpoint-engineering.com High Voltage Cable Testing www.powerpoint-engineering.com Metering System Design & Installation www.powermeters.ie Energy Monitoring Surveys www.powermeters.ie Thermal Imaging Surveys www.thermalimagers.ie

TRAINING

PAT Training www.pat-testers.ie Thermal Imaging Training www.thermalimagers.ie Lockout Tagout Safety Awareness Training www.lockoutsafety.com ATEX Safety Awareness Training www.atexprotection.com Electrical Appreciation Training www.powerpoint-engineering.com Electrical Testing Training www.powerpoint-engineering.com

power meters brochure

Documents