power generating shock absorber
TRANSCRIPT
![Page 1: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/1.jpg)
POWER GENERATING SHOCK ABSORBER
Presented by:Mr. Pratik P. ChaudhariNDMVP KBTCOE NASHIK
Guided By:Prof. N. K. Kharate
![Page 2: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/2.jpg)
Conventional Suspension Systems
![Page 3: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/3.jpg)
Conventional V/S Regenerative
![Page 4: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/4.jpg)
Different types:-
Linear-type Shock Absorbers
Rotary-type Shock Absorbers
Based on the type of construction and the way of energy generation
![Page 5: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/5.jpg)
Linear type Regenerative Shock Absorbers
![Page 6: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/6.jpg)
Construction
![Page 7: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/7.jpg)
Rotary-type Shock Absorbers
![Page 8: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/8.jpg)
Construction
![Page 9: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/9.jpg)
PRINCIPLEThis Works On Up And Down Movement Of Shock Absorber.
![Page 10: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/10.jpg)
WORKING Whenever the vehicle experiences a jerk, the suspension moves down. The
free rod also moves down along with the suspension, which in turn results in the downward rolling motion of the shaft over the rubber strip.
As the shaft rotates, the coil inside the dynamo also rotates which results in the generation of induced electricity.
The electricity that is generated, passes to the bridge rectifier via the connecting wires from the dynamo.
The bridge rectifier converts the Alternating Current to the Direct Current.
This current can be used for lightening of bulbs or it can also be stored in a capacitor.
![Page 11: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/11.jpg)
![Page 12: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/12.jpg)
Road Tests
• Vehicle used: Chevrolet Suburban SUV (2002 model).
• Test speed: 32kmph & 48 kmph
![Page 13: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/13.jpg)
Result
@ 32 km/hr
@ 48 km/hr
![Page 14: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/14.jpg)
Since the weight of the system is very less, it does hampers with the momentum of the vehicle. Therefore, more power is produced from a comparatively lesser energy.
Since it is a case of rolling motion, and we know that the coefficient of rolling friction is less, hence there is no significant loss in the energy.
In this, the diameter of the dynamo is about 3 cm. if this diameter is further reduced, then more amount of energy can be produced due to greater number of rotations.
Energy is produced near the speed breakers as well as near ditches on even slightly uneven roads.
ADVANTAGES
![Page 15: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/15.jpg)
DISADVANTAGESSystem is the costly If system breakdowns it’s very difficult and
costly affair to repair itThe system is very complex Requires high precision machinery and
skilled workers to manufacture
![Page 16: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/16.jpg)
Further modificationsThe number of dynamos used can be increased.
The capacity of dynamo can be increased.
The diameter of dynamo can be decreased.
Gear system can be introduced so that efficiency can be increased.
![Page 17: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/17.jpg)
CONCLUSIONA larger magnetic field will be necessary if more power needs to be generated.
Conversion of energy produced by a vehicle shock absorbers movements into electrical energy, allows a significant fuel saving.
It is possible to obtain a fuel saving between 1.5 and 6%, depending on the vehicle and on the driving conditions. Moreover, the researchers say that this system can improve the stability of the vehicle. “Regenerative braking harvests large amount of power in a very short time, in an intermittent manner”, Lie Zuo said. “However, the regenerative shock absorbers can harvest the power in a continuous way. On the smooth highway road, the electric shock absorbers can improve the fuel efficiency by 2%, and on bumpy roads up to 10% increase can be expected.” More researchers are going on to extend the tests involving other types of vehicles such as trucks, buses and other automotive vehicles
![Page 18: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/18.jpg)
REFERENCES1. Lei Zuo, Brian Scully, Jurgen Shestani and Yu Zhou, ‘Design and characterization of an electromagnetic energy harvester for vehicle suspensions’, Journal of Smart Materials and Structures, Volume 19, Number 4.2. Gupta A, Jendrzejczyk J A, Mulcahy T M and Hull J R , ‘Design of electromagnetic shock absorbers’, International Journal of Mechanics & Material Design, Volume 3, Number 3.3. Goldner R B, Zerigian P and Hull J R, ‘A preliminary study of energy recovery in vehicles by using regenerative magnetic shock absorbers’, SAE Paper #2001-01-2071.4. Pei-Sheng Zhang and Lei Zuo, ’Energy harvesting, ride comfort, and road handling of regenerative vehicle suspensions’, ASME Journal of Vibration and Acoustics, 2012.5. Zhen Longxin and Wei Xiaogang , ‘Structure and Performance Analysis of Regenerative Electromagnetic Shock Absorber’, Journal of networks, vol. 5, no. 12, December 2010
![Page 19: Power Generating Shock Absorber](https://reader033.vdocuments.mx/reader033/viewer/2022061400/58f9ad6d760da3da068b981b/html5/thumbnails/19.jpg)