powder ext. 12k abc w/o brkt model p12p m18 - sms · powder ext. 12k abc w/o brkt model p12p m18...

Powder Ext. 12k Abc W/O Brkt ModelP12p M18

Home / Fire Protection / Fire Extinguishers / Portable Extinguishers Cartridge Operated /

Powder Ext. 12k Abc W/O Brkt Model P12p M18

Product Group: 291 Product number: 766994

General descriptionOur 12 kg powder extinguishers boast high levels ofmonoammonium phosphate giving you quicker fire fightingcapability even on electrical fires up to 35 kV.

Unitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.

Features• Higher fire ratings• Easier fire fighting capability• Safer fire fighting• High quality material and finish

Benefits• High concentrates of fire fighting medium ensure quicker

fire fighting capability to reduce damage costs• Integrated flow control valve at the hose end equips you

with a direct and better control to fight fire• Our higher than normal industry standard burst pressure for

the cylinder and hose safeguards you when fire fighting• A long life and low maintenance costs are assured as our

extinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isalso included.

Technical dataCapacity 12 Kg

Min discharge range 4 Mtr

Test Pressure 26 Bar

Working Pressure 14.2 Bar

Weight Empty 7.8 Kg

Weight Full 19.8 Kg

Height 730 mm

Diameter 180 mm

Fire Rating 55A-233B-C

Operating temp range -30 C to +60 C

Incompatibility

MARINE PRODUCTSMARINE CHEMICALSSAFETYMARITIME LOGISTICSSHIPS AGENCY

http://wssproducts.wilhelmsen.com/

http://wssproducts.wilhelmsen.com/fire-protection/

http://wssproducts.wilhelmsen.com/fire-protection/fire-extinguishers/

http://wssproducts.wilhelmsen.com/fire-protection/fire-extinguishers/portable-extinguishers-cartridge-operated/

The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate.

Never use one of these powders to refill a device which hascontained the other product

Spare Charges Regulations

• Spare charges shall be provided for 100% of the first tenextinguishers and 50% of the remaining fire extinguisherscapable of being recharged on board. Not more than sixtytotal spare charges are required. Instructions for rechargingshall be carried on board

Ordering information

Product Number Product name

766994 EXTINGUISHER POW 12KG

711416 UNIVERSAL BRACKET F/P6/P6P/P9P/

766993 POWDER EXT. 12K ABC W/BRKT

Accessories


Recommended to conform to regulations

668251 CO2 CARTRIDGE F/P12/P12P

668319 ABC POWDER 12KG

667584 VALVE SEAL FOR EXTINGUISHER

If Required

669655 STRAP F/MARINE BRACKET

ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well China ClassificationSociety

Approval documents

Type Document Size

766994 MED Certificate PDF 102 KB

766994 EN3-7A1 certificate PDF 505 KB

Module D Certificate PDF 100 KB

http://wssproducts.wilhelmsen.com/mediabank/store/3240/766994-MED-Certificate.pdf

http://wssproducts.wilhelmsen.com/mediabank/store/352/EDP-766993-12Kg-ABC-EN3-7A1.pdf

http://wssproducts.wilhelmsen.com/mediabank/store/3144/MODULE-D-USINES-DESAUTEL.pdf

Type Document Size

RMRS Certificate PDF 2391 KB

China Class Society Certificate PDF 2142 KB

Directions for useEasy To Use

Operation Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. Theflow rate is controlled by the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.

Pressurization during use Striking the internal cartridge releases the propellant (CO2), pressurizes the body andthus causes the powder to be discharged. The cartridge is interchangeable and its level can be checked accuratelyby weighing, so the extinguisher can be refilled on site, without having to send it back to the factory. Both preventiveand corrective maintenance can therefore be carried out in optimum conditions

Instruction For Use

1. Pull out the safety pin2. Strike by pressing handle3. Control the flow rate by squeezing the final control valve and direct the spray at the base of the fire

DocumentationProduct documentation

Type Document Size

766994 Technical data sheet PDF 169 KB

A part of Wilhelmsen Maritime Services,a Wilh. Wilhelmsen group company

http://wssproducts.wilhelmsen.com/mediabank/store/3735/RMRS-Certificate-for-Portable-Dry-Powder-Extinguisher-.pdf

http://wssproducts.wilhelmsen.com/mediabank/store/3755/CCS-Certificate-.pdf

http://wssproducts.wilhelmsen.com/mediabank/store/353/EDP-766993-12-kg-Powder-ABC-Techdrawing.pdf

Powder Ext 9 Kg ABC


Powder Ext. 9 kg Abc W/O Brkt Model P9p M18


General descriptionOur 9kg powder extinguishers boast high levels ofmonoammonium phosphate giving you quicker fire fightingcapability even on electrical fires up to 35 kV.








Technical dataFire rating 43A/233B/C

Capacity 9 Kg

Min discharge Range 4 Mtr

Burst disc pressure 26 Bar

Working Pressure 15 Bar

Weight Empty 6 Kg

Weight Full 15 Kg

Height 640 mm

Diameter 180 mm

Operating temp range -30 C to + 60 C

Incompatibility












766990 POWDER EXT. 9K ABC W/O BRKT



Accessories



668244 CO2 CARTRIDGE F/P6/P9P

668293 ABC POWDER 9 KG


If Required


ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification society

Approval documents

Type Document Size


MODULE D Certificate PDF 100 KB





Type Document Size


Directions for useEasy to Use


Pressurization during use

Striking the internal cartridge releases the propellant (CO2), pressurizes the body and thus causes the powder to bedischarged. The cartridge is interchangeable and its level can be checked accurately by weighing, so theextinguisher can be refilled on site, without having to send it back to the factory. Both preventive and correctivemaintenance can therefore be carried out in optimum conditions.

Instruction of Use

1. Pull out the safety pin2. Strike by pressing handle3. Control the flow rate by squeezing the final control valve and direct the spray at base of fire


Type Document Size




http://wssproducts.wilhelmsen.com/mediabank/store/311/EDP-766990-techdraw.pdf

Powder Ext 6 Kg ABC


Powder Ext. 6 kg Abc W/O Brkt Model P6p M18


General descriptionOur 6 kg powder extinguishers boast high levels ofmonoammonium phosphate giving you quicker fire fightingcapability even on electrical fires up to 35 kV.








Technical dataFire rating 34A/233B/C

Capacity 6 Kg

Discharge Range 4 Mtr



Weight Empty 5 Kg

Weight Full 11 Kg

Height 500 mm

Diameter 180 mm


Incompatibility












766988 POWDER EXT. 6K ABC W/O BRKT



Accessories



668236 CO2 CARTRIDGE 120G F/P6P

668285 ABC POWDER 6 KG


If Required


ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society.

Approval documents

Type Document Size


766988 NF EN3-7A1 certificate PDF 494 KB

MODULE D certificate PDF 100 KB


http://wssproducts.wilhelmsen.com/mediabank/store/315/EDP-766987-6Kg-ABCPowder-NFEN3-7.pdf


Type Document Size





Pressurization during use Striking the internal cartridge releases the propellant (CO2), pressurizes the body andthus causes the powder to be discharged. The cartridge is interchangeable and its level can be checked accuratelyby weighing, so the extinguisher can be refilled on site, without having to send it back to the factory. Both preventiveand corrective maintenance can therefore be carried out in optimum conditions.

Instruction for Use

1. Pull out the safety pin2. Strike by pressing the handle3. Control the flow rate by squeezing the final control valve direct the spray at base of fire


Type Document Size





http://wssproducts.wilhelmsen.com/mediabank/store/316/EDP-766987-6KgABCPowder-Techdrawing.pdf

Water Ext 9 L


Water Ext. 9 l W/O B E9 Model E9


General descriptionOur 9 L cartridge operated water extinguisher gets to the heart offires with the specially designed lance giving you quicker firefighting capabilities.



Benefits• Our water fire extinguishers have a high fire rating giving

you quicker fire fighting capability even on electrical fires upto 1000 V

• Integrated flow control valve at the hose end equips youwith a direct and better control to fight fire

• Our higher than normal industry standard burst pressure forthe cylinder and hose safeguards you when fire fighting

• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isincluded.

Technical dataCapacity 9 Ltr

Min discharge Range 4 Mtr



Weight Empty 6Kg

Weight Full 15Kg

Height 500 mm

Diameter 180 mm

Fire Rating 21 A

Operating temp range +5 C to + 60 C

Properties

The extinguisher can also be used in the presence of an electricalsource. There is no danger: the fact that the water is to thrown in a






fine droplet spray and its additive prevents it from conductingelectricity at voltages less than 1000 V.





766982 WATER EXT.9L W/O B E9


766981 WATER EXT.9L W/B E9

Accessories



668178 CO2 CARTRID.60G F/E9/E9A1


If Required



Approval documents

Type Document Size




RMRS certificate PDF 2428 KB



http://wssproducts.wilhelmsen.com/mediabank/store/338/EDP766982-9LWater-NF-EN3-7A1.pdf


http://wssproducts.wilhelmsen.com/mediabank/store/3736/RMRS-certificate-for-portable-water-foam-and-fat-fire-extinguisher.pdf



Operation

Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. The flow rate iscontrolled by the final control valve. The fact that it is so simple to use means that risks of incorrect use are greatlyreduced.

Pressurization during use

Striking the internal cartridge releases the propellant (CO2), pressurizes the body and thus causes the water andadditive to be discharged. The cartridge is interchangeable and its level can be checked accurately by weighing, sothe extinguisher can be refilled on site, without having to send it back to the factory. Both preventive and correctivemaintenance can therefore be carried out in optimum conditions.

Instruction for Use



Type Document Size



http://wssproducts.wilhelmsen.com/mediabank/store/339/EDP766982-9LWater-Techdrawing-.pdf

EDP_766984_Foam 9L Extinguisher


Foam Ext. 9 l W/O B


General descriptionOur 9 L foam extinguisher gives you a specially blended highperformance AFFF additive enabling you to fight fires quicker andefficiently.



Benefits• Specially blended high performance AFFF additive enables

you to fight fires quickly and efficiently ensuring damagecosts are reduced to a minimum.



• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin inincluded.





Weight Empty 6 Kg

Weight Full 15Kg

Height 640 mm

Diameter 180 mm

Fire Rating 27A-233B

Operating temp range +5 C to +60 C

Properties

the extinguisher can be used in the presence of an electricalsource. There is no danger as the water is thrown in a fine droplet






spray prevents it and its additive from conducting electricity atvoltages less than 1000 V.





766984 EXTINGUISHER FOAM 9L


766983 EXTINGUISHER FOAM 9L

Accessories




736579 AFFF FOAM CHARGE 90ML FOR E9A1EV


If Required


ApprovalsThe extinguisher holds MED, RMRS, CCS, PED and NF EN 3 -7 approvals. The extinguishers are completelycompliant with the MED and SOLAS standards.

Approval documents

Type Document Size


766984 PED certificate PDF 1011 KB

766984 NF EN3-7 certificate PDF 509 KB





http://wssproducts.wilhelmsen.com/mediabank/store/288/EDP-766984-PED.pdf

http://wssproducts.wilhelmsen.com/mediabank/store/287/EDP-766984-EN3-7.pdf




Directions for useEasy to Use Operation Once the safety pin has been removed, the device is pressurized by pressing on the strikinghandle. The flow rate is controlled by the final control valve. The fact that it is so simple to use means that risks ofincorrect use are greatly reduced.

Pressurization during use Striking the internal cartridge releases the propellant (CO2), pressurizes the body andthus causes the water and additive to be discharged. The cartridge is interchangeable and its level can be checkedaccurately by weighing, so the extinguisher can be refilled on site, without having to send it back to the factory. Bothpreventive and corrective maintenance can therefore be carried out in optimum conditions.



Type Document Size



http://wssproducts.wilhelmsen.com/mediabank/store/289/EDP-766984.pdf

EDP_764043


Foam Ext.9l W/O Brkt.Ev Low Tmp.Hi Type E9a1ev Lt Hp


General descriptionThe Unitor 9 L, cartridge operated, low temp application foam fireextinguisher overcomes limitations that occur when fighting fires inextreme low temperature conditions with normal foamextinguishers.

We introduce antifreeze with our high performance AFFF foam toensure an impregnable foam film is achieved to extinguish the fireand prevent reignition.

This extinguisher does not include the hanging bracket.

Features• Special high performance AFFF additive and antifreeze• Easier fire fighting capability• Safer fire fighting• High quality material and finish

Benefits• Specially blended AFFF additive with antifreeze enables

you to fight fires at sub zero temperatures quickly andefficiently ensuring damage costs are reduced to aminimum








Weight Empty 6 Kg

Weight Full 15Kg

Height 640 mm

Diameter 180 mm

Fire Rating 27A-233B







Properties

the extinguisher can be used in the presence of an electricalsource. There is no danger as the water is thrown in a fine dropletspray prevents it and its additive from conducting electricity atvoltages less than 1000 V.



764043 FOAM EXT.9L WO BRK.EV LOW TMP.HI PR

If required

ApprovalsApproval documents

Type Document Size

EN 3 Certificate 9L foam low temperature PDF 644 KB


http://wssproducts.wilhelmsen.com/mediabank/store/3682/EN-3-Certificate-9L-foam-low-temperature.pdf

763870 6 litre fat fire extinguisher


Fat Fire Ext. 6 L W/O Brkt Model E6a15 Evf


General descriptionOur Unitor 6 L, cartridge operated, fat fire extinguisher has beenspecially designed for extinguishing cooking oil fires in industrialkitchens and canteens.

As the first line of defence, it can be installed in addition to theautomatic system in open kitchens where automatic equipment isrequired, or as a means suited to the risks presented in kitchens,reheating rooms and cooking islands.

Features• A B F rated- specially designed for kitchen oil fires (Class F)• Easier fire fighting capability• Safer fire fighting• High quality material and finish

Benefits• Our fat fire extinguishers contain water plus a high

performance AFFF additive which forms a film in additionwill extinguish electrical fires up to 35KV

• The integrated flow control valve at the curved hose endequips you with a direct and better control to fight the fire


• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2 mm thick steel, shotblasted, and polyester coated. A non rusting safety pin isinlcuded.


Discharge Range 3 Mtr



Weight Empty 6Kg

Weight Full 12 Kg

Height 500 mm

Diameter 180 mm

Fire Rating 13A-144B-75F








766980 FAT FIRE EXT. 6L WITH BRKT


Accessories


Required in case of use


736579 AFFF FOAM CHARGE 90ML FOR E9A1EV


If Required


ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment and also complies withEuropean standard NF EN 3-7A1.

Approval documents

Type Document Size







Operation

Once the safety pin has been removed, press the striking handle to pressurise the extinguisher. The flow rate iscontrolled by the spray gun on the nozzle. The fact that it is so simple to use means that risks of incorrect use aregreatly reduced.

* Pressurization during use*

The internal cartridge’ s discharge releases the propellant gas (CO2), pressurises the reservoir and thus allows thewater and its additive to be discharged. The interchangeability of this cartridge and its precise control by weighing


http://wssproducts.wilhelmsen.com/mediabank/store/343/EDP-763870-6L-Fat-NF-EN3-7A1.pdf




means the extinguisher can be re-charged in situ, without being returned to the plant. Both preventive and correctivemaintenance can therefore be carried out in optimum conditions.

Instructions For Use

1. Pull out the safety pin by pulling the ring2. Strike by pressing the handle3. Press the spray gun leverand direct the jet at the base of the flames


Type Document Size



http://wssproducts.wilhelmsen.com/mediabank/store/344/EDP763870-6LFAT-Techdrawing.pdf

657957 Metal Fire Extinguisher


Metal Fire Ext. 9 kg W/O Brkt Model P9fm.M M18


General descriptionThe Unitor 9 kg, cartridge operated, powder metal fire extinguisherovercomes the limitations when fighting metal fires withconventional fire extinguishers.

Introducing argon with the Microfire D powder ensures the powderbonds to magnesium, aluminium, zinc, calcium and sodium fires,extinguishes them and prevents reignition.

This extinguisher does not include the special bracket.

Features• Special powder and argon propelling agent for metal fire

fighting• Easier fire fighting capability• Safer fire fighting• High quality material and finish

Benefits• Specially blended Microfire D powder enables you to fight

metal fires quickly and efficiently ensuring damage costsare reduced to a minimum




Technical dataCapacity 9Kg



Weight Empty 9 Kg

Weight Full 18 Kg

Height 640 mm

Diameter 180 mm

Fire rating Class D


Argon cartridge 0.536 L






Properties

Fluid white powder may be used on electrical sources. Comprisesa low percentage of potassium salts mixed with micro-particles ofglass which melt at a low temperature (less than 600°C) to form anadhesive coat with no vents.

Incompatibility

Microfire D powder is strictly incompatible with all other powders.Never refill an extinguisher except with the original powder.



657957 METAL FIRE EXT. 9K W/O BRKT

766996 Metal Fire Extinguisher with bracket


Accessories



759902 Microfire Powder for Metal Fire Extinguisher

759894 Argon Cylinder 0.53 L


If required


ApprovalsThe metal fire extinguisher has been examined against the provisions of Annex III, Module B, of the PressureEquipment Directive 97/23/EC.

Approval documents

Type Document Size

BV PED Approval PDF 1011 KB

http://wssproducts.wilhelmsen.com/mediabank/store/279/EDP-657957-Approval.pdf


Type Document Size



http://wssproducts.wilhelmsen.com/mediabank/store/280/EDP-657957-Datasheet.pdf

766995 2Kg ABC stored pressureextinguisher

Home / Fire Protection / Fire Extinguishers / Stored Pressure Extinguishers /

Powder Ext. 2k Abc W/Spc W/Brkt Model Pp2p


General descriptionUnitor’s range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.

Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguisherlonger life and reduced maintenance costs.

Features• Higher fire ratings• Safer fire fighting• High quality material and finish

Benefits• Our fire extinguishers boast high levels of mono ammonium

phosphate giving you quicker fire fighting capability even onelectrical fires up to 35Kv


• A long life and low maintenance costs are assured as ourextinguishers are manufactured from 2mm thick steel, shotblasted, and polyester coated with a non rusting safety pin





Weight Empty 1.6 Kg

Weight Full 3.6 Kg

Height 380 mm

Diameter 105mm

Fire Rating 13A - 89B- C

operating temp range -30C to +60C

Incompatibility

The mono-ammonia phosphate-based ABC powder is strictlyincompatible with the BC powder, a derivative of sodiumbicarbonate. Never use one of these powders to refill a devicewhich has contained the other product

.





http://wssproducts.wilhelmsen.com/fire-protection/fire-extinguishers/stored-pressure-extinguishers/



766995 POWDER EXT. 2K ABC W/SPC W/BRKT

Accessories


Recommended spares to conform to regulations

766995 POWDER EXT. 2K ABC W/SPC W/BRKT

ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment. It complies with Europeanstandard EN 3 and is one of the highest performance devices in its category.

Approval documents

Type Document Size






Directions for useEasy To Use Operation

After removing the safety pin, press the control lever, releasing the powder. A check valve inside the head capcontrols the flow rate. The fact that it is so simple to use means that risks of incorrect use are greatly reduced.

Permanent pressure

The extinguisher is pressurized during manufacture, and undergoes a helium test to ensure that it is totally leak-tight.An indicator monitors the pressure over time. The extinguisher must be returned to the factory for refilling; in practiceon-site requalification involves exchanging the extinguisher.

Instructions For Use

1.Pull out the safety pin by pulling the ring

1. Press the trigger and steam the jet at the base of the flames


http://wssproducts.wilhelmsen.com/mediabank/store/326/EDP-766995-SP-2KgABCPowder-NFEN3-7A1-.pdf


http://wssproducts.wilhelmsen.com/mediabank/store/3734/RMRS-Certificate-for-Stored-Pressure-Powder-Extinguisher-.pdf



Type Document Size



http://wssproducts.wilhelmsen.com/mediabank/store/327/EDP-766995-SP-2Kg-ABCPowder-techdrawing.pdf

667535 5Kg CO2 Extinguisher


Co2 Ext 5k W/O Brkt Model U5c


General descriptionOur Unitor range of fire extinguishers offers you higher fire ratings,easier fire fighting capability and increased levels of user safety.Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguishera longer life and reduced maintenance costs.


Benefits• Our CO2 fire extinguishers are suitable to fight fires on live

electrical installations on board shipping vessels and can beused on electrical fires up to 35Kv




Burst Disc Pressure 200 Bar



Weight Full 14 Kg

Height 930 mm

Diameter 139.7 mm

Fire Rating 89B

Operating temp range -30C to +65C

Properties

CO2 is almost completely non toxic, and leaves no residue afteruse.

Electrical fires

CO2 does not conduct electricity, and is specially recommendedfor all fires in the presence of a live conductor for example :transformers, electrical panels, computers, motors.








667535 CO2 EXT 5K W/O BRKT

668111 MAR BRACKET W/STRAP F/U5C

667527 CO2 EXT 5K W/ BRKT

Accessories



667535 CO2 EXT 5K W/O BRKT

If Required



It complies with European standard NF - EN 3, and has demonstrated the highest performance in its category

Approval documents

Type Document Size


66753 EN3-7A1 certificate PDF 583 KB





Operation

Very easy to use. After removing the safety pin, press the operating lever. This lever releases the CO2 and controlsits flow rate. By means of a valve located inside the CO2 self closing control valve. In the latter, also features asafety valve that ensures the release of CO2 in the event of excess pressure, notably in the case of prolongedexposure to a temperature above 60°C.

Principle of permanent pressure


http://wssproducts.wilhelmsen.com/mediabank/store/390/EDP667527-5KgCO2-EN3-7A1.pdf


http://wssproducts.wilhelmsen.com/mediabank/store/3733/RMRS-certificate-for-portable-CO2-fire-extinguisher.pdf


The apparatus is loaded with its extinguishing agent, self-propelling gas, on manufacture. The load is checkedaccurately by weight. The extinguisher must be returned to the factory for refilling.

Instructions for Use

1. Pull out the safety pin2. Hold the plastic discharge horn and aim at the base of the fire3. Strike lever down fully and press on CO2 self closing control valve


Type Document Size



http://wssproducts.wilhelmsen.com/mediabank/store/391/EDP667527-5KgCO2-techdrawing.pdf

Stored Pres 6 Kg ABC Powder Ext


Dp Ext. 6k Abc Pp6p Sp Wo/Bracket









Min discharge range 4.5 Mtr



Weight Empty 3.3 Kg

Weight Full 9.4 Kg

Height 530 mm

Diameter 190 mm

Fire Rating 34A - 233B- C


Incompatibility


Spare Stored Pressure Extinguisher regulations






• For fire extinguishers which cannot be recharged on board,additional portable fire extinguishers of the same quantity,type, capacity and number be provided for 100% of the firstten extinguishers and 50% of the remaining fireextinguishers. Not more than sixty total spare extinguishersare required.



671909 MARINE BRACKET W/STRAP F/PP6P

Accessories



671594 DP EXT. 6K ABC PP6P SP WO/BRACKET

ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society

It complies with European AENOR - EN 3 standard, and is of the hightest performance in its category.

Approval documents

Type Document Size

EDP 671594 MED Module B Certificate PDF 80 KB





Operation

Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. The flow rate iscontrolled by the tap on the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.

Permanent pressure

http://wssproducts.wilhelmsen.com/mediabank/store/3322/EDP-671594-MED-Module-B-Certificate.pdf

http://wssproducts.wilhelmsen.com/mediabank/store/3145/MODULE-D-CERTIFICATE-AUCA.pdf



The device is pressurised during manufacture. A pressure gauge shows that pressure is maintained over time. Theextinguisher must be refilled at the factory ; in practice the operation takes place on-site by a standard exchange

Instruction for Use

1. Pull out the safety pin2. Press on the striking handle and direct the spray at base of fire.

DocumentationSDS

• DP EXT. 6K ABC PP6P SP WO/BRACKET

Product documentation

Type Document Size



http://www.wilhelmsen.com//services/maritime/companies/buss/DocLit/MaterialSafety/Firefightingmedia/Pages/FIREEXTINGUISHINGPOWDERABC.aspx

http://wssproducts.wilhelmsen.com/mediabank/store/416/EDP-671594-SP-6KgABC-Techdrawing.pdf

Stored Pres 9KG ABC Powder Ext











Minimum Discharge Time 26 Sec

Discharge Range 4.5 Mtr

Test Pressure 24Bar


Weight Empty 4.4 Kg

Weight Full 13.5Kg

Height 587mm

Diameter 218mm



Incompatibility The mono-ammonia phosphate-based ABCpowder is strictly incompatible with the BC powder, a derivative ofsodium bicarbonate. Never use one of these powders to refill adevice which has contained the other product











739516 MARINE BRACKET F/PP9P

Accessories




If Required

756387 STRAP F/M. BRACKET F/PP12P 5 PCK

ApprovalsThis fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment as well as ChinaClassification Society

It complies with European standard NF - EN 3 and is of the highest performance devices in its category

Approval documents

Type Document Size

739508 MED certificate JPG 331 KB




Directions for useEASY TO USE

Operation

http://wssproducts.wilhelmsen.com/mediabank/store/477/EDP-739508-SP9KgABC-MED.jpg




Once the safety pin has been removed, the device is pressurized by pressing on the striking handle. The flow rate iscontrolled by the tap on the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.

Permanent pressure

The device is pressurised during manufacture. A pressure gauge shows that pressure is maintained over time. Theextinguisher must be refilled at the factory ; in practice the operation takes place on-site by a standard exchange.

* Instruction for Use*

1. Pull out the safety pin2. Press on the striking handle and direct the spray at the base of the fire

DocumentationSDS



Type Document Size




http://wssproducts.wilhelmsen.com/mediabank/store/480/EDP-739508-SP-9KgABC-techdrawing.pdf

743104 12kg Dry powder Stored pressure




General descriptionOur Unitor range of fire extinguishers offer you higher fire ratings,easier fire fighting capability and increased levels of user safety.Whether you require cartridge, stored pressure or wheeled we usehigh grade quality materials and coatings giving your extinguishera longer life and reduced maintenance costs.







Min discharge range 4.5Mtr



Weight Empty 4.8 Kg

Weight Full 16.9 Kg

Height 630 mm

Diameter 198 mm



Incompatibility












743112 MARINE BRACKET F/PP12P

Accessories




If Required

756387 STRAP F/M. BRACKET F/PP12P 5 PCK


Approval documents

Type Document Size

743104 MED certificate JPG 352 KB




Directions for useEASY TO USE

Operation

http://wssproducts.wilhelmsen.com/mediabank/store/483/EDP-743104-SP12KgABC-MED.jpg




Once the safety pin has been removed, the device is pressurised by pressing on the striking handle. The flow rate iscontrolled by the tap on the final control valve. The fact that it is so simple to use means that risks of incorrect useare greatly reduced.

Permanent pressure

The device is pressurized during manufacture. A pressure gauge shows that pressure is maintained over time. Theextinguisher must be refilled at the factory ; in practice the operation takes place on-site by a standard exchange.

Instruction for Use

1. Pull out the safety pin2. Press on the striking handle and direct the spray at the base of the fire

DocumentationSDS



Type Document Size




http://wssproducts.wilhelmsen.com/mediabank/store/486/EDP-743104-SP-12KgABS-Techdrwaing.pdf

powder ext. 12k abc w/o brkt model p12p m18 - sms · powder ext. 12k abc w/o brkt model p12p m18...

Documents