position sensing cylinders electromechanical cylinders · pneumatic cylinders hydraulic, pneumatic...
TRANSCRIPT
Hydraulic, Pneumatic and Electric Cylinder ProductsCylinder Division
Parker Hannifin CorporationCylinder Divisionphone (847) 298-2400fax (800) 892-1008www.parker.com/[email protected]
Position Sensing Cylinders Electromechanical Cylinders
04/17 / HY08-0800.01/NAIn line with our policy of continuing product improvement, specifications and information contained in this publication are subject to change.Copyright ©2017 by Parker Hannifin Corporation. All rights reserved.PRINTED IN THE U.S.A.
• Hybrid Actuation System • Solar Tracking Solutions
Bulletin HYOS-4000-82• Bore Sizes 2.00” to 8” Bore offered
on RDH 2H/3H• Pump Displacements from 0.1 to 12 cc/rev• Pressure to 3000 PSI• Motor up to 28 HP
HASSeries 2HX / 3HX• Catalog 0106• Two Valve Manifold Options 7 Standard
Bolt-on Manifolds• 4 Standard Integral Manifolds• Two Feedback Options: LDT and LRT
Wavescale• Bulletin HY08-1113• Low friction seals option• Pressures to 3,000 psi• Bore sizes 1.50" to 16.00"• Digital and analog outputs• Intrinsically safe or explosion proof
available• 2AX pneumatic version
Intellinder™• Bulletin HY08-0880• Absolute Position Sensor for
Industrial Application Integrates a highly engineered sensor into the hydraulic cylinder
• Cylinder feedback installation is virtually plug-and-play
• Signals absolute positioning• Position identifying bar codes are
marked right on the rod
Series ETH• Precision Class 7 ball screw actuator• Frame Sizes, ETH032/ETHOSO/
ETH080/ETH100/ETH125• Screw Pitch 5, 10, 16 20 32 mm/rev• Stroke up to 2000 mm• Thrust Force up to 114 kN• Speed up to 1.7 m/s• Position repeatability+/- 0.03 mm
Series XFC• Precision Class 5 (std) planetary
roller screw actuator• Optional Class 3 available upon request• Frame Sizes, XFC075/XFC090/XFC115/
XFC140/XFC165/XFC190• Screw Pitch 5, 10, 20 mm/rev• Stroke up to 2000 mm• Thrust Force up to 356 kN• Speed up to 1 m/s• Position repeatability+/- 0.03 mm
Mounting Accessories• Catalog HY08-1300• Available in inch or metric sizes• Spherical bearing• Alignment aids• Stainless steel attachments
Pneumatic CylindersHydraulic, Pneumatic and Electric Cylinder Products
Series 2A / 2AN• Catalog HY08-0910• Heavy Duty Line• Bore sizes 1.00" to 14.00"• Pressures to 250 psi• 17 mounting styles• Piston rod diameter .500"
through 5.500"• Standard temperature -10°F
to +165°F • High-temp capability (400°F)
Series MA• Catalog HY08-0915• Tie Rod Cylinders• Bore sizes 1-1/2” to 6”• Pressures to 200 psi• 11 mounting styles• 3 rod diameters• Standard temperature -10°F
Series VE• Catalog HY08-0948• Bore sizes 2.00" to 24.00"• Maximum working pressure
150 PSI pneumatic• Piston rod diameters .625" to
3.500"• Single and double piston rod • Spring extend or retract• Double acting
Series SA (Stainless Steel)• Catalog HY08-0914• NFPA Interchangeable• Bore sizes 1.13" to 8.00"• Pressures to 250 psi• 8 standard mounting styles• For corrosive environments
and food processing industry applications
Series 2AJ / 2ANJ• Catalog HY08-0931• Rod Lock Air Cylinders• 13 Standard mounting styles• Bore sizes 1-1/2" to 8"• Piston Rod Diameters 5/8"
to 2-1/2"• Working pressure to 100 psi• Single and double rod
construction available
Hydraulic Cylinders
Series CHD / CHE • Catalog HY08-1137• Compact Hydraulic Cylinders• CHD 207 bar operating
pressure• CHE up to 140 bar operating
pressure (bore dependent)• Bore sizes 20mm to 100mm• 13 mounting styles• Temperature range -23°C to
+121°C• Male and Female rod ends
standard – specials to order• Incremental, per mm stroke
lengths available• SAE, NPT or BSPP Porting
Standard
Series 2H• Catalog HY08-1314• Nominal pressure 3,000 psi• Standard temperature -10°F to
+165°F• Bore sizes 1.50" to 6.00"• Piston rod diameter .625" to
4.000"• 18 mounting styles
Series 3H• Catalog HY08-1314• Heavy Duty Service• Nominal pressure 3,000 psi• Standard temperature -10°F to
+165°F• Bore sizes 7.00" to 20.00"• Piston rod diameter 3.000" to
10.000"• 12 mounting styles
Series HMI• Catalog HY08-1151• Heavy Duty Hydraulic Line• ISO standard 6020-2• Single and double rod ends• Pressures to 210 bar
(3,000 psi)• 18 mounting styles• Bore sizes 25mm to 200mm• Metric rod, tube, ports and
fasteners
Series 3L• Catalog HY08-1130• Medium Duty Line• Bore sizes 1.00" to 6.00", 8.00"• Pressures to 1,000 psi• 14 mounting styles• High-temp capability (400°F)
Series VH• Catalog HY08-1120• Nominal pressure 3,000 PSI• Bore sizes 2.50" to 8.00"• Piston rod diameters 1.000" to
5.500"• 15 standard mounting styles
Hydraulic Roundline CylindersSeries RDH• Catalog HY08-1320• Operating pressure of 3,000 psi• Gross stroke lengths available in
any practical stroke length• 9 standard mounting styles• 5 standard rod end styles (specials
available for easy adaptability)• Approximately 36% lower weight than comparable
steel tie rod cylinder construction
Parker Intensifiers• Maximum Input Pressures:
Air – 250 psi (17 bar) Oil – 1000 psi (69 bar)
• Maximum Output Pressures: 5/8" to 3" ram – 5000 psi (345 bar) 3-1/2" to 5-1/2" ram – 3000 psi (206 bar)
• Maximum Operating Temperatures: -10°F to +165°F (-23°C) to (+74°C)