pool line

Easy Sanitary Solutions has more than 20 years of

experience in residential water drainage. In addition to our

Easy Drain shower drains, a special drain is developed for

pools and spas. This drain has guaranteed waterproofing

and is suitable for both indoor and outdoor use. With the

pool line system it is easy to design a custom pool drain

by connecting predefined or custom length drain pieces.

Insired by the popular Modulo TAF series, the pool drain

contains a height adjustable frame, waterproofing

membrane and tilable trim.

American Copper Buildings, New York City

The Water Protection System (WPS) provides an easy-to-install and safe-to-

assemble seal system for shower drains. This WPS-system consists of a flexible

waterproofing membrane which is connected to the drain’ stainless steel

flanges or the floor drain’s special cuff. ESS offers lifetime warranty on leakage

for drains with WPS.

The Tile Adjustable Frame (TAF) is fully adjustable at the time of

tiling. TAF creates a finished edge, and ensures a perfect fit with any

thickness of floor material.

Trim (tile insert: 1/2”)

Rough (2” tail piece)

LINEAR POOL DRAIN

Height adjustable frame TAF 1/4 - 3/4” (7 - 18 mm)

Waterproofing membrane WPS pre-assembled waterproofing membrane

Max. capacity 11 gal (US) / min (42 l/min)

Material (rough) stainless steel (type 316)

Material (frame & trim) stainless steel (type 316)

Trim tileable | tile insert: 1/2” (12 mm)

Width (rough) 4 1/2“ (113 mm)

Width (frame) 2 1/2” (62 mm)

Width (trim) 1 3/4” (45 mm)

Outlet Ø2” tail piece

Approvals UPC, cUPC, ISO 9001, Mass-code

The linear pool drain system contains several drain pieces which can be easily connected to

each other, to form the entire pool drain. Each drain piece consists of a stainless steel rough,

waterproofing membrane (WPS), a height adjustable frame (TAF) and a tileable trim.

CUSTOM LENGTH

STANDARD LENGTH WITH CENTRAL OUTLET

CORNER PIECE

END PIECE

15 3/4” 47 1/4”

15 3

/4”

15 3

/4”

47 1/

4”

Determine the size and shape of the pool drain. The order form shows all standard size drain parts

such as straight pieces, corner pieces, end pieces and connectors. It is also possible to order a

custom length straight piece with or without outlet. Dimensions are based on the size of the TAF frame which is visible after tiling the floor, see technical image of the custom length piece.

Every drain piece is delivered with one rough connector, two frame connectors and a waterproofing

set. Always check the installation advice before installing the drain.

SET-UP

Dimensional sketch. Dimensions are based on the size of the TAF frame, not the rough size.

Easy Drain pool line consists of different pieces and an option for a custom length piece. Each stan-

dard straight piece is 47 1/4” (1200 mm), the end piece and corner piece are 15 3/4” (400 mm) in

length.

Straight, no outlet Straight, centric outlet Straight, excentric outlet

End pieceCorner piece Rough connector Frame connectors (2x)

Custom length47 1/4” (1200 mm) 47 1/4” (1200 mm) 47 1/4” (1200 mm)

COMPONENTS

PD-02 PD-03 PD-04PD-01

PD-05 PD-06 PD-07 PD-08

CUSTOM LENGTH (PD-01)

A

B

TAF

HEI

GH

T

WPS

FRA

ME

WID

TH

ROU

GH

WID

TH

15 3/4” (400 mm)

Length (A) min. 15 3/4” (400 mm)max. 70 7/8” (1200 mm)

Outlet distance (B) min. 5 7/8” (150 mm)

Rough width 4 1/2” (113 mm)

Frame width 2 1/2” (62 mm)

Trim tileable | tile insert: 1/2” (12 mm)

The custom length piece is a straight drain with

two open ends. This custom length piece can be

ordered with or without 2” tail piece.

15 3/4” (400 mm)

Technical drawing: custom length piece

Technical amendm

ents and printing errors reserved / Salvo errori e omissioni / Bajo reserva de m

odificaciones técnicas y errores de impresión.

© U

SA-2018

Easy Sanitary SolutionsNijverheidsstraat 60, 7575 BK Oldenzaal, The Netherlands

T: +31 541 200 800 | F: +31 541 200 899 info@esspost.com www.easydrain.com

ESS PRODUCTS ARE PATENTED AND REGISTRATED TRADEMARKS MADE BY ESS