ponto tm - oticon medical · 0000 power on press the on/off button for approx. 2 seconds until all...

Buttons on the Ponto StreamerThe neck loop is an integral part of the Ponto Streamer’s electronic system. It is used as an antenna to transmit sound to your sound processor.

For best possible sound and longest possible streaming time, the Ponto Streamer should always be worn with one of the included neck loops, as in the above figure.

More information: Please see page 18 in the Instructions for Use

Insert the cable from the enclosed charger in the micro USB socket in the bottom of the Ponto Streamer.

Charging is indicated by the blinking green on/off indicator on the top.

We recommend that you charge the Ponto Streamer daily e.g. during the night.


Charging the Ponto Streamer

Please read this user guide before you start using your Ponto Streamer

Your Ponto Streamer

Neck loop – medium Neck loop – long

Instructions for Use (IFU)Getting Started (this document)

Box 2

Box 4

Skin (see page 68 in IFU)

IntroductionThank you for choosing our product.The Ponto Streamer offers a wide range of communication possibilities for your Ponto Plus sound processor.

This Getting Started describes how you can use your Ponto Streamer with the neckloop attached. For detailed informa-tion, secondary functions or more advanced functions please refer to the included Instructions for Use, or the documentation, including instructional videos online:

www.oticonmedical.com/connectline

Long

Med

ium

Box 1

The Ponto Streamer box contains the following elements:

Charger(see page 24 in IFU)

Wearing the Ponto Streamer

Microphone

Volume control (up/down)

Neck loop in/out

Phone

TV

AUX selector

On/off

3.5mm mini jack stereo cablefor MP3/music (see page 54 in IFU)

USB cable for charging via e.g. computer (see page 24 in IFU)

3.5mm splittercable for use with PCs (see page 56 in IFU)

PontoTM – The Bone Anchored Hearing System

Ponto StreamerInstructions for Use

Buttons on the Ponto StreamerThe neck loop is an integral part of the Ponto Streamer’s electronic system. It is used as an antenna to transmit sound to your sound processor.

For best possible sound and longest possible streaming time, the Ponto Streamer should always be worn with one of the included neck loops, as in the above figure.


Insert the cable from the enclosed charger in the micro USB socket in the bottom of the Ponto Streamer.

Charging is indicated by the blinking green on/off indicator on the top.

We recommend that you charge the Ponto Streamer daily e.g. during the night.


Charging the Ponto Streamer

Please read this user guide before you start using your Ponto Streamer

Your Ponto Streamer

Neck loop – medium Neck loop – long

Instructions for Use (IFU)Getting Started (this document)

Box 2

Box 4

Skin (see page 68 in IFU)

IntroductionThank you for choosing our product.The Ponto Streamer offers a wide range of communication possibilities for your Ponto Plus sound processor.

This Getting Started describes how you can use your Ponto Streamer with the neckloop attached. For detailed informa-tion, secondary functions or more advanced functions please refer to the included Instructions for Use, or the documentation, including instructional videos online:

www.oticonmedical.com/connectline

Long

Med

ium

Box 1

The Ponto Streamer box contains the following elements:

Charger(see page 24 in IFU)

Wearing the Ponto Streamer

Microphone

Volume control (up/down)

Neck loop in/out

Phone

TV

AUX selector

On/off

3.5mm mini jack stereo cablefor MP3/music (see page 54 in IFU)

USB cable for charging via e.g. computer (see page 24 in IFU)

3.5mm splittercable for use with PCs (see page 56 in IFU)


Ponto StreamerInstructions for Use


Ponto StreamerGetting Started

1373

36_U

S /

2013

.07

Manufacturer:

Oticon A/SKongebakken 9

2765 SmørumDenmark

Phone: +45 39 17 71 [email protected]

Distributor:

Oticon Medical ABEkonomivägen 2SE-436 33 Askim

SwedenPhone: +46 31 748 61 [email protected]

0000137336000001


Ponto StreamerGetting Started

1373

31U

K /

2015

.05

Manufacturer:

Oticon A/SKongebakken 9

2765 SmørumDenmark


Distributor:

Oticon Medical ABDatavägen 37B

SE-436 32 AskimSweden


0000137331000001

0000

Power onPress the on/off button for approx. 2 seconds until all front lights are on, and the on/off indicator on the top is green.

Power offPress and hold the on/off button for approx. 2 seconds until the green on/off indicator is turned off.

Pairing the Ponto StreamerBefore the Ponto Streamer can be used with other devices – such as a cell phone – the two devices have to be paired.

Put the Ponto Streamer in pairing mode. Press and hold the on/off button for approx. 5 seconds, until the on/off indicator blinks blue.The on/off indicator will switch to steady blue to indicate successful pairing.

Both the Ponto Streamer and the second device need to be in pairing mode. The pin code for the Ponto Streamer (if requested) is 0000 (four zeros).

More information: page 22 in the Instructions for Use More information: page 32 in the Instructions for Use

More information: page 39 in the Instructions for Use

Mobile phoneAnswer a call

When your mobile phone rings, you will hear an incoming call alert in your sound processor, and the phone button on the Ponto Streamer and the status indicator will blink green.

Press the phone button briefly to answer the call.

Off/on for surrounding soundsPress and hold volume up AND volume down buttons for approx. 1 second simultaneously.

Reject call

An incoming call can be rejected by briefly pres-sing the volume down button.

Make a call

To make a call you only need to operate the cell phone. The call is automatically con-nected to your Ponto Streamer.

Microphone

T-coilThe Ponto Streamer has a built-in tele loop receiver (T-coil).

To receive sound from the tele loop receiver press and hold the AUX selector for approx. 2 seconds.


Remote control of the sound processorThe Ponto Streamer functions as a remote control for your sound processor when not used for streaming.

Volume up/down

Press briefly up or down

Change program in the sound processor

Press & hold up or down

More information: page 30 in the Instruction for Use

MusicYou can listen to music via the mini jack cable at the bottom of the Ponto Streamer or wireless via Bluetooth.

Music is chosen by a brief press on the AUX selector.


ConnectLine microphoneNote: requires additional equipment.

Makes it possible to transmit sound from a chosen speaker to your sound processor through the Ponto Streamer.

Press the microphone button briefly to activate the microphone.

More information: www.oticonmedical.com/connectline

Phone solutionNote: requires additional equipment.

Makes it possible to use the Ponto Streamer with a traditional analog landline phone.

Press the phone button briefly to take a call.


TV solutionNote: requires additional equipment.

Makes it possible to transmit the sound from a TV to your sound processor through the Ponto Streamer.

Press the TV button briefly to activate the TV.


ponto tm - oticon medical · 0000 power on press the on/off button for approx. 2 seconds until all...

Documents