polycarbonate information

7/27/2019 Polycarbonate Information

1/7

1. EASY AND LOW-COST INSTALLATION

INSTALLATION VIDEO

http://www.youtube.com/watch?v=w9U6qZoigY8&feature=youtu.be

To ensure compliance with snow load and negative wind load resistance requirements,anchor brackets should be fitted for each purlin.

The polycarbonate panels are fastened to the underlying structure using specific

brackets, which must be anchored to the purlins using suitable self-drilling/self-tappingscrews (on metal structures) and tap bolts (for wooden structures). These screws andbolts are not supplied.

Different connector profiles can be used, depending on the required load specifications.

system with aluminium connector system with polycarbonate covergasket

Fixing systems

For the installation of the arcoPlus626revers, system. Follow the illustrations to the right.

The fixing of the polycarbonate to the structure below it must be carried out using purpose-made stainless steel brackets, fastened to all the purlins with self-perforating, self-threading

screws (on metallic structures) and mordant (wooden structures).

To close the ends of the panels use a transparent polycarbonate blocking profile, while the

covergasket profile has a stopper.

In the case a aluminium connector profile is used, this allows for the tightening of screws, in

order to guarantee a perfect hold for the whole system.
http://www.youtube.com/watch?v=w9U6qZoigY8&feature=youtu.behttp://www.youtube.com/watch?v=w9U6qZoigY8&feature=youtu.be


2/7

1 - Plane anchorage of panel to

structure

2 - Vertical anchorage of panel

to structure

3 - Clicking in the cover gasket 4 - Insertion of block on the

outside of the panels and closing

stopper on gasket cover

5 - Final view of polycarbonate

covergasket

6 - Final view with aluminium

connector

Detail terminal Detail start


3/7

2. MODULARS PANELS OF UNPROTECTED

ALVEOLAR POLYCARBONATE FOR

CEILINGS AND MOVABLE WALLS

Velario613 Velario20-5, are modulars systems used in residential and industrialbuildings, for new buildings as well as for renovation and maintenance operations.

It consists of polycarbonate panels with male-female connection.

They are ideal for all those cases where a thermal insulation is required with a rapid andsimple installation.

Advantages

Easy and low-cost installation

Self-supporting Light transmission

Heat insulation

Specifications

Ceiling installation made with modular multiwall unprotected polycarbonate panels, a

thickness of 10mm /20mm on complete section. Thermal transmission coefficient Velario

613, U=1,7 W/m2KVelario20-5 , obtained through air chambers inside the panel.

PRODUCTION STANDARDS

Velario613 Velario20-5

Thickness10mm 20mm

Structure3 walls 5 walls

Modular width605mm 667mm

Panel length

No limits No limits


4/7

TECHNICAL FEATURES


Thermal transmittance2,7 W/ m2K 1,7 W/ m2K

Isolation acoustique 16dB 16dB

Linear thermal expansion0,065mm/mC 0,065mm/mC

Use temperature-40C +120 C -40C +120 C

Fire reaction EN 13501b - s1, d0 b - s1, d0

OPTICAL PROPERTIES


Lighttransmission(LT)%

Solar Factor(SF)%

Lighttransmission(LT)%

Solar Factor(SF)%

Satin

Crystal 76 81 70 74

Satin Opal58 65 52 57

3. POLYCARBONATE CORRUGATED SHEETS WITH

"MICROALVEOLARe" STRUCTURE

TEGOPLUS corrugated sheet of polycarbonate microalveolare structure produced in

different profiles for the construction of skylights, walls, transparent roofs also in combination

with cover plates and insulated panels.

The versatility of this product allows you to create skylights, gutter-ridges or eave inter-

layers.

Download the new catalog TEGOPLUS

.

ADVANTAGES

Easy and low-cost installation.
http://www.gallina.it/doc/cataloghi/edilizia/TEGOPLUS_EN.pdfhttp://www.gallina.it/doc/cataloghi/edilizia/TEGOPLUS_EN.pdf


5/7

Light transmission

Resistance to U.V. rays and to hail

Le Longitudinal and transverse overlap

APPLICATIONS

Curtain walls

Covering and skylights

PROFILE RANGE

The profiles drawings of polycarbonate "microalveolare" structure sheets TEGOPLUS

hereby included are just examples of products available from stock. With the new production

technology any kind of requested profile could be obtained.

4. Multiwall U.V. protected polycarbonate sheets

Reference: http://www.gallina.it/en/prodotti/index.php?prod=221

The characteristic structure of the multiwall sheets with air space inside guarantees goodthermal insulation and excellent resistance to crash stress. The external side of Policarb is
http://www.gallina.it/en/prodotti/index.php?prod=221http://www.gallina.it/en/prodotti/index.php?prod=221


6/7

coated with U.V. protection (on request both sides) warranting resistance to aging due to

atmospheric agents and UV rays.

Policarb is used for roofing, windows, skylights, greenhouses, porches,


7/7

polycarbonate information

Documents