www.pro-tect.com

POLY-CRAFT MASK® consists of a three-ply protection system: a fiber glass mesh between a 40-pound craft paper and a polyethylene sheet. Water proof and tear resistant. Perfect for hardwood floors, tile, vinyl, marble, any surface where you used to use rosin paper. Quickly becomes a must-have product for quick on the job protection. 100 times stronger than rosin paper.

Woven Strength: Poly-Craft Mask is PRO TECT’s most tear resistant paper. Featuring woven mesh reinforce-ment, it is designed for the most demanding applications which require superior durability and toughness.

Poly Barrier: Unlike many other woven/paper laminations, Poly-Craft Mask features a coating of white UV resistant polyethylene over the top surface of the woven fabric. This top coating enhances the product’s barrier and durability properties.

Paper Backed: Poly-Craft Mask has paper backing which allows the product to absorb moisture, oil and grease. The paper surface is also easy to write on which can be a significant advantage in industrial applications.

Poly-Craft Mask weighs 25 lbs per MSF.

PART NO.PCM3-200

DESCRIPTION36” X 200’ roll, 600 s.f.

UNPROTECTED

Tear and puncture resistantOil, grease and water resistant barrierEasily folded w/o cracking/barrier loss

POLY-CRAFT MASK

Tear and puncture resistantOil, grease and water resistant barrierEasily folded w/o cracking/barrier loss

SDS

Product Information:Product: Poly Craft Mask Supplier: Pro Tect Associates, Inc., 2165 Shermer Road, Suite C, Northbrook, Il 60062; (847) 446-8664

Component DataProduct Ingredients Cas Number TLV/PELKraft Paper – –Polyelefin Laminant – –Polyethylene Film – –Continuous Filament Fiberglass 65997-17-3 15 Mg/M3 OSHA PEL 5Mg/M3ACGIH TLVHAZARDOUS INGREDIENTS* Cas Number OSHA PEL ACGIH TLVFiberglass (As Respirable Nuisance Dust) 65997-17-3 5Mg/M3 3 Mg/M3*Substances listed in the Hazardous Ingredients section are those that have been determined to be health hazards and are present at a concentration of 1% or greater.

Physical DataBOILING POINT: Not applicable MELTING POINT : Not applicable VAPOR PRESSURE: Not applicable VAPOR DENSITY: Not applicable SPECIFIC GRAVITY: Not applicable SOLUBILITY: NegligibleAPPEARANCE: Paper/Film Lamination ODOR: Bland

Fire and Explosion DataFLASH POINT: Not applicable AUTO IGNITION TEMPERATURE: >230OC METHOD USED: Not applicableSPECIAL FIRE FIGHTING INSTRUCTIONS: None FLAMMABILITY LIMITS: LEL-Not applicable UEL – Not applicableUNUSUAL FIRE AND EXPLOISION HAZARDS: None EXTINGUISHING MEDIA: Water, Foam, Carbon dioxide, Dry Chemicals.

Reactivity DataStability (conditions to avoid): stableHAZARDOUS DECOMPOSITION PRODUCTS: Thermal Hazardous Polymerization: Will not occurDecomposition (Combustion) may produce carbon monoxide, Carbon dioxide and/or oxides of nitrogen.

Health Hazard DataEye Contact: Acute: Direct contact may cause mechanical irritation. CHRONIC: NoneSkin Contact: Acute: Essentially no irritation. CHRONIC: NoneSkin Absorption: Acute: Not likely to be absorbed. CHRONIC: Not likely to be absorbed.Ingestion: Not likely to occur under normal use and conditions.Acute: Observe individual; if symptoms develop consult physician. CHRONIC: None knownFOR FIBROUS GLASS: (Normal handling and use of this product does not cause the fiberglass reinforcement to be released from the prod-uct. The following information is provided as background on fibrous glass dust.)Acute: Mechanical irritation of the mouth, nose and throat.CHRONIC: In June, 1987 the International Agency for Research on Cancer (IARC) categorized fiber glass continuous filament as not clas-sifiable with respect to human carcinogenicity. The evidence from human as well as animal studies was evaluated by IARC as insufficient to classify fiber glass continuous filament as a possible, probable, or confirmed cancer causing material. Foradditional information: Refer to the Material Data Sheet for fiberglass continuous filament, available from Advanced Glassfiber Yarns, 2558 Wagener Rd., Aiken, SC 29801; or, PPG Industries, Inc., Glass Group, Fiber Glass Products, One PPG Place, Pittsburgh, PA 152272.Signs and Symptoms of Exposure: None known Medical Conditions Generally Aggravated by Exposure: None known

First AidSkin: Wash with soap and water. INHALATION: None required.Eyes: Irrigate with water for at least 15 minutes. Seek medical attention if irritation persists.INGESTION: Not likely to occur under normal use and conditions. If symptoms develop, consult physician.

Special Handling and Disposal InformationSkin Protection: Not normally required Ventalation: Not required for normal use and conditionsEye Protection: Not normally requiredRespiratory Protection: Not required for normal use andDisposal Method: In Accordance with state conditions. If any abnormal use or condition produces local, and federal regulations.Dust: Wear NIOSH/OSHA approved respirator.

Special Precautions/Additional InformationHAZARDOUS MATERIAL, PROPER SHIPPING NAME: Not regulated by DOT. HAZARD CLASS: Non- HazardousSPECIAL HANDLING OR SHIPPING PRECAUTIONS: None Required UN IDENTIFICATION NUMBER: NoneADDITIONAL INFORMATION: None

While the information and recommendations set forth herein are believed to be accurate, PRO TECT® Associates, Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.

POLY-CRAFT MASK