pole line hardware - preformed line products line...meets csa c83 requirements for energy charpy...
TRANSCRIPT
-
Pole Line Hardware
September 2016
-
Table of Contents
INTRODUCTION ................................................................................................................................ 4
Tangent Suspension Single Conductor (220-240kV) ................................................................... 5
Tangent Suspension Single Conductor V-String (220-240kV) .................................................... 6
EHV Tangent Suspension Double Conductor (330-345kV).......................................................... 7
Ball Y-Clevis .................................................................................................................................. 8
Ball Y-Clevis - Hot Line .................................................................................................................... 9
Ball Clevis ................................................................................................................................ 10
Ball Clevis - Hotline........................................................................................................................ 12
Oval Ball Eye ................................................................................................................................ 13
Clevis Eye ................................................................................................................................ 14
Y-Clevis Eye ................................................................................................................................ 15
Socket Eye ................................................................................................................................ 16
Clevis-Clevis ................................................................................................................................ 17
Clevis-Clevis: Rotated ................................................................................................................... 19
Thimble Clevis ................................................................................................................................ 20
Socket Clevis ................................................................................................................................ 23
Socket Y-Clevis .............................................................................................................................. 24
Socket-Clevis Extended ................................................................................................................ 25
Socket-Clevis Hot Line .................................................................................................................. 26
Shackle-Anchor .............................................................................................................................. 27
Shackle-Chain ................................................................................................................................ 28
Shackle-Twisted ............................................................................................................................. 29
Chain Link ................................................................................................................................ 30
Strain Link ................................................................................................................................ 31
Curved Base Dead End Tee .......................................................................................................... 32
Vari-Grip™ Dead-end ..................................................................................................................... 33
Compression Dead-end Jumper Assembly (ACSR Drake) ........................................................ 34
Yoke Plates ................................................................................................................................ 35
Bolt: Shoulder Eye ........................................................................................................................ 37
Bolt: Oval Eye ............................................................................................................................... 39
Bolt: 5/8” Ball Link Y-Eye ............................................................................................................. 40
Bolt: 3/4” Ball Link Y-Eye ............................................................................................................. 41
Bolt: 7/8” Ball Link Y-Eye ............................................................................................................. 42
-
Table of Contents
Washers: Square and Curved ...................................................................................................... 43
Eye Nut ................................................................................................................................ 44
Oval Eye (Hot Galvanized) ......................................................................................................................... 44
Thimble Eye (Hot Galvanized) ................................................................................................................... 44
Twin Grip Suspension ................................................................................................................... 45
Suspension Plate ........................................................................................................................... 46
Suspension Plate Flat .................................................................................................................... 47
Sag Adjustment Assembly ............................................................................................................ 48
Flexible Ground Wire Assemblies ................................................................................................ 51
Extension Link ................................................................................................................................ 52
Extension Strap .............................................................................................................................. 53
Extension Straps with Anchor Shackle(s) ................................................................................... 55
Tie Top Neutral Wire Bracket ........................................................................................................ 56
Bolted Neutral Wire Bracket with Clamp ..................................................................................... 57
Clamp: Cable Suspension ............................................................................................................ 58
Guy Hook ................................................................................................................................ 59
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 4
INTRODUCTION Welcome! This catalog includes our offering of:
• Charpy Level 1 parts (meeting minimum energy absorption of 20 joules @ -20ºC)
• Charpy Level 2 parts (meeting minimum of 50% shear fracture @ -45 ºC)
• fittings made with alternate materials We can design custom yoke plates of various shapes, sizes, strengths, thicknesses and hole spacings. We can also work with your hardware string set designs and provide an arrangement using PLP hardware. Contact PLP Canada for details.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 5
Tangent Suspension Single Conductor (220-240kV)
Catalog Number Charpy Rating
H-1410068 Level 1 Aluminum-based conductor ranges: from 0.312 inches (7.9 mm) to 2.001 inches (50.8 mm). Please specify your conductor size when you place your order. Note: Insulators are not included
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 6
Tangent Suspension Single Conductor V-String (220-240kV)
Catalog Number Charpy Rating
H-1410069 Level 1
Aluminum-based conductor ranges: from 0.312 inches (7.9 mm) to 2.001 inches (50.8 mm). Please specify your conductor size when you place your order. Note: Insulators are not included
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 7
EHV Tangent Suspension Double Conductor (330-345kV)
Catalog Number Charpy Rating
H-1410070 Level 1
Aluminum based conductor ranges: from 1.546 inches (39.2 mm) to 2.001 inches (50.8 mm) Please specify your conductor size when you place your order. Note: Insulators are not included
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 8
Ball Y-Clevis
Ball Y-Clevis fittings are used to attach ball and socket insulators to associated hardware within an insulator string. The bent bolt on the Y section allows for additional articulation within the assembly. All Ball Y- Clevis fittings are tested to meet CSA C83 requirements for energy absorption/toughness. Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
Body Bent Bolt Cotter Pin Bolt Diameter
Forged Galvanized Steel Galvanized Steel Stainless Steel 3/4"
Catalog
Number
ANSI Class Rated Strength Standard
Package
Charpy
Rating
BYC-120C 52-3 and 52-5 120kN 25 Level 1 BYC-220C 52-8 and 52-11 220kN 25 Level 1
BYC-120C-L2 52-3 and 52-5 120kN 25 Level 2 BYC-220C-L2 52-8 and 52-11 220kN 25 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 9
Ball Y-Clevis - Hot Line
Hot line Ball Y-Clevises are used to attach ball and socket insulators to other associated hardware within an insulator string. Shoulders are provided to accommodate hot line tools and the bent bolt in the Y-section provides an additional point of articulation within an assembly. All Ball-Y Clevises are tested to meet CSA C83 requirements for energy absorption / toughness. Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel ¾” Bolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
ANSI Class
Rated Strength Charpy Rating kN Pounds
HLBYC-120C 52-3 and 52-5 120 26,900 Level 1 HLBYC-220C 52-8 and 52-11 220 49,500 Level 1
HLBYC-120C-L2 52-3 and 52-5 120 26,900 Level 2 HLBYC-220C-L2 52-8 and 52-11 220 49,500 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 10
Ball Clevis BC-120C
BC-220C
Body Bolt Cotter Pin
Forged Galvanized Steel Galvanized Steel Stainless Steel
Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 11
Catalog Number
ANSI Class
Bolt Diameter
Rated Strength
Ultimate Breaking Strength
Charpy Rating
BC-120C 52-5 5/8" 120kN 138kN Level 1
BC-220C 52-11 3/4" 220kN 253kN Level 1
BC-120C-L2 52-5 5/8" 120kN 138kN Level 2
BC-220C-L2 52-11 3/4" 220kN 253kN Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 12
Ball Clevis - Hotline HLBC-220C
Body Bolt Cotter Pin
Forged Galvanized Steel Galvanized Steel Stainless Steel
Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
Catalog Number CSA Type Rated Strength Charpy Rating
HLBC-120C CS-5, Fitting No.2 120kN Level 1
HLBC-220C CS-11, Fitting No.4 220kN Level 1
HLBC-120C-L2 CS-5, Fitting No.2 120kN Level 2
HLBC-220C-L2 CS-11, Fitting No.4 220kN Level 2
-
Visit our website at: 1711
Oval Ball Eye
Body: Forged Galvanized Steel
Meets CSA C83 requirements for energy
Charpy Level 1 parts meet minimum energy absorptionCharpy Level 2 parts meet minimum of 50% shear fracture @
Catalog Number CSA Type
OBE-120C CS-5, Fitting No.1
OBE-120C-L2 CS-5, Fitting No.1
Preformed Line Products (Canada) Limited Visit our website at: www.preformed.on.ca Email: [email protected]
1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5 Phone: 519-740-6666 Fax: 519-740-7917
Page 13
Steel
eets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºCCharpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
CSA Type ANSI Class
Rated Strength
5, Fitting No.1 52-5 120kN
5, Fitting No.1 52-5 120kN
ºC
Charpy Rating
Level 1
Level 2
-
Visit our website at: 1711
Clevis Eye
CE-5261C
Clevis eyes are used to attach All clevis eyes come with a bolt, nut and cotter Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorptionCharpy Level 2 parts meet minimum of 50% shear fracture @ Body: Forged Galvanized SteelBolt: Galvanized Steel Cotter Pin: Stainless Steel Catalog Number
Rated StrengthKN
CE-5105C 120
CE-5261C 120 CE-5259C 120
CE-5105C-L2 120
CE-5261C-L2 120 CE-5259C-L2 120
Preformed Line Products (Canada) Limited Visit our website at: www.preformed.on.ca Email: [email protected]
1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5 Phone: 519-740-6666 Fax: 519-740-7917
Page 14
CE-5105C
attach clamps to yoke plates and clevis tongue insulator
All clevis eyes come with a bolt, nut and cotter pin.
eets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºCCharpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
ized Steel
Rated Strength LBS
Bolt Diameter
Eye Width
Standard Package
Charpy Rating
26,900 5/8” 1” 25 Level 1
26,900 5/8" 0.75” 25 Level 126,900 5/8" 0.50” 25 Level 1
26,900 5/8” 1” 25 Level 2
26,900 5/8" 0.75” 25 Level 226,900 5/8" 0.50” 25 Level 2
lators.
ºC
Charpy Rating
Level 1
Level 1 Level 1
Level 2
Level 2 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 15
Y-Clevis Eye
Y-Clevis Eyes are used primarily to attach clamps to Tower Pads and Yoke Plates. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel Bolt: Galvanized steel Cotter Pin: Stainless steel
Catalog Number
Dimensions Rated Strength
A
(IN)
B
(IN)
C
(IN)
D
(IN)
E
(IN)
H
(IN)
Bolt
Diam
(IN)
lbs
kN
Std
Pkg
Charpy
Rating
YC-5206C 0.69 1.6 2.65 2 0.59 4.8 3/4" 26,900 120 25 Level 1
YC-5207C 0.69 1.6 2.65 2 0.69 4.8 3/4" 26,900 120 25 Level 1
YC-5209C 0.81 1.6 2.65 2 1.06 4.8 3/4" 26,900 120 25 Level 1
YC-5211C 0.81 1.6 2.65 2 2.1 4.8 3/4" 26,900 120 25 Level 1
YC-5206C-L2 0.69 1.6 2.65 2 0.59 4.8 3/4" 26,900 120 25 Level 2
YC-5207C-L2 0.69 1.6 2.65 2 0.69 4.8 3/4" 26,900 120 25 Level 2
YC-5209C-L2 0.81 1.6 2.65 2 1.06 4.8 3/4" 26,900 120 25 Level 2
YC-5211C-L2 0.81 1.6 2.65 2 2.1 4.8 3/4" 26,900 120 25 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 16
Socket Eye
Preformed Line Products Socket Eyes are designed to be used with Suspension and Dead End Clamps. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel CSA Type: CS-5
Catalog
Number
A
(IN)
B
(IN)
C
(IN)
D
(diam)
E
(IN)
ANSI
Class
Rated
Strength
(kN)
Std
Pkg
Charpy
Rating
SE-5150C 1.42 2.40 3.6 0.69 0.53 52-3, 52-5 120 kN 25 Level 1
SE-5152C 1.42 2.40 3.6 0.69 0.75 52-3, 52-5 120 kN 25 Level 1
SE-5154C 1.42 2.40 3.6 0.69 1.06 52-3, 52-5 120 kN 25 Level 1
SE-5154C-75 1.42 2.40 3.6 0.81 1.06 52-3, 52-5 136 kN 25 Level 1
SE-5155C 1.42 2.40 3.6 0.81 2.13 52-3, 52-5 120 kN 25 Level 1
SE-5150C-L2 1.42 2.40 3.6 0.69 0.53 52-3, 52-5 120 kN 25 Level 2
SE-5152C-L2 1.42 2.40 3.6 0.69 0.75 52-3, 52-5 120 kN 25 Level 2
SE-5154C-L2 1.42 2.40 3.6 0.69 1.06 52-3, 52-5 120 kN 25 Level 2
SE-5154C-75-L2 1.42 2.40 3.6 0.81 1.06 52-3, 52-5 136 kN 25 Level 2
SE-5155C-L2 1.42 2.40 3.6 0.81 2.13 52-3, 52-5 120 kN 25 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 17
Clevis-Clevis Clevis-Clevis fittings are generally used to attach clevis tongue insulators to associated hardware in an insulator string. All Clevis-Clevis fittings come standard with bolt, nut and cotter pin. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
Bolt Diameter
Rated Strength
Standard Package
Charpy Rating
CC-55C 3/4" 120 kN (26,900lbs) 25 Level 1 CC-56C 5/8" 120 kN (26,900lbs) 25 Level 1
CC-55C-L2 3/4" 120 kN (26,900lbs) 25 Level 2 CC-56C-L2 5/8" 120 kN (26,900lbs) 25 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 18
CC-100C
Catalog Number
Length mm (in)
Width mm (in)
Thickness mm (in)
Length Hole to Hole
mm (in)
Hole diameter mm (in)
Rated Strength
Charpy Rating
CC-100C 203.2 (8) 76.2 (3) 16 (5/8) 127 (5) 27 (1.062) 444 kN Level 1
CC-100C-L2 203.2 (8) 76.2 (3) 16 (5/8) 127 (5) 27 (1.062) 444 kN Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 19
Clevis-Clevis: Rotated Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
Dimensions mm (in) Rated Strength
Standard Package
Charpy Rating
A B C D
RCC-55C 22
112 (4.41) 45.5 (1.83) 3/4" 120 kN 25 Level 1 RCC-56C 22
112 (4.41) 45.5 (1.83) 5/8" 120 kN 25 Level 1
RCC-55C-L2 22
112 (4.41) 45.5 (1.83) 3/4" 120 kN 25 Level 2
RCC-56C-L2 22
112 (4.41) 45.5 (1.83) 5/8" 120 kN 25 Level 2 Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC All rotated clevis-clevis fittings come standard with a bolt, nut and cotter pin.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 20
Thimble Clevis TC-5C (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) TC-5C-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption/toughness.
• Material: High Strength Galvanized Steel
• Used for reinforcing the loop of PLP Dead Ends.
• Bolt: Galvanized Steel
• Cotter Pin: Stainless Steel
• Rated Breaking Strength: 35,000 Lbs.
• Weight approx 2 lbs.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 21
TC-60C-01 (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) TC-60C-01-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption/toughness.
• Material: High Strength Galvanized Steel
• Used for reinforcing the loop of PLP Dead Ends.
• Bolt: Galvanized Steel
• Cotter Pin: Stainless Steel
• Rated Strength: 60,000 Lbs
• Ultimate Breaking Strength: 69,000 Lbs
• Estimated Weight: 11.5 LBS
units are inches
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 22
TC-100KC (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) TC-100KC-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption/toughness.
• Material: High Strength Galvanized Steel
• Used for reinforcing the loop of PLP Dead Ends.
• Bolt: Galvanized Steel
• Cotter Pin: Stainless Steel
• Rated Strength: 445 kN (100,000 lbs)
• Ultimate Breaking Strength: 511 kN (115,000 lbs)
• Estimated Assembly Weight: 9.7 LBS
units are inches
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 23
Socket Clevis
Socket Clevis Fittings are used to attach associated hardware to ball and socket insulators. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
Dimensions mm (in) Bolt Dia
Rated Strength
Std Pkg
ANSI Class
Charpy Rating A B C
SC-55C 22 (.87) 93.3 (3.68) 45 (1.78) 5/8" 120 kN
(26,900 lbs) 25
52.3, 52.5
Level 1
SC-56C 22 (.87) 93.3 (3.68) 45 (1.78) 3/4" 120 kN
(26,900 lbs) 25
52.3, 52.5
Level 1
SC-220C 30 (1.19) 120.17 (4.74) 45 (1.78) 3/4" 220 kN
(49,500 lbs) 25
52.8, 52.11
Level 1
SC-55C-L2 22 (.87) 93.3 (3.68) 45 (1.78) 5/8" 120 kN
(26,900 lbs) 25
52.3, 52.5
Level 2
SC-56C-L2 22 (.87) 93.3 (3.68) 45 (1.78) 3/4" 120 kN
(26,900 lbs) 25
52.3, 52.5
Level 2
SC-220C-L2 30 (1.19) 120.17 (4.74) 45 (1.78) 3/4" 220 kN
(49,500 lbs) 25
52.8, 52.11
Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 24
Socket Y-Clevis
SYC-220C
Socket Y-Clevis Fittings are used to attach associated hardware to ball and socket insulators. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
Bolt Diam
Rated Strength
Ultimate Breaking Strength
CSA Type
ANSI Class Charpy Rating
SYC-120C 3/4" 120 kN 138 kN CS-5 52-3, 52-5 Level 1
SYC-220C 3/4" 220 kN 253 kN CS-11 52.8, 52.11 Level 1
SYC-120C-L2 3/4" 120 kN 138 kN CS-5 52-3, 52-5 Level 2
SYC-220C-L2 3/4" 220 kN 253 kN CS-11 52.8, 52.11 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 25
Socket-Clevis Extended
Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
Catalog Number
Clevis Width
Bolt
Diam
Rated
Strength
Ultimate Breaking Strength
Std Pkg
ANSI Class
Charpy Rating
EXSC-220C 1.18” 3/4" 220 kN 253 kN 15 52.8, 52.11 Level 1
EXSC-220C-L2 1.18” 3/4" 220 kN 253 kN 15 52.8, 52.11 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 26
Socket-Clevis Hot Line
Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC CSA-C83-121, Fitting No.2
Catalog Number
Overall Length
(O.L.)
Coupling Length
(C.L.)
Shank Length
Clevis Width
(W)
Clevis Depth
(D)
Bolt
Diam
Rated
Strength
ANSI Class
Std Pkg Charpy
Rating
HLSC-55C 11.42" 10.4" 5.12" 0.83" 1.78” 5/8" 120 kN 52.3, 52.5 15 Level 1
HLSC-56C 11.42" 10.4" 5.12" 0.83" 1.78" 3/4" 120 kN 52.3, 52.5 15 Level 1
HLSC-220C 12.09” 10.63" 5.12" 1.19” 2.37” 3/4" 220 kN 52.8, 52.11 15 Level 1
HLSC-55C-L2 11.42" 10.4" 5.12" 0.83" 1.78” 5/8" 120 kN 52.3, 52.5 15 Level 2
HLSC-56C-L2 11.42" 10.4" 5.12" 0.83" 1.78" 3/4" 120 kN 52.3, 52.5 15 Level 2
HLSC-220C-L2 12.09” 10.63" 5.12" 1.19” 2.37” 3/4" 220 kN 52.8, 52.11 15 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 27
Shackle-Anchor
Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
A (in)
B (in)
C (in)
D (in)
E (in)
F (in)
Bolt diam (in)
Rated Strength Std Pkg
Charpy Rating
lbs kN
AS-160C 1.1 2.2 2.91 2.1 3.1 1.7 3/4" 36,000 160 25 Level 1
AS-222C 1.25 2.7 3.6 2.6 3.7 2 7/8" 50,000 222 25 Level 1
AS-222C75 1.25 2.7 3.6 2.6 3.7 2 3/4" 50,000 222 25 Level 1
AS-333C 1.4 3 5 3.9 4 2.3 1" 75,000 333 10 Level 1
AS-444C 1.7 3.75 4.9 3.5 5 2.7 1-1/4" 100,000 444 10 Level 1
AS-666C 3 5.2 5.8 4.3 5.7 3 1-3/8" 150,000 666 10 Level 1
AS-160C-L2 1.1 2.2 2.91 2.1 3.1 1.7 3/4" 36,000 160 25 Level 2
AS-222C-L2 1.25 2.7 3.6 2.6 3.7 2 7/8" 50,000 222 25 Level 2
AS-222C75-L2 1.25 2.7 3.6 2.6 3.7 2 3/4" 50,000 222 25 Level 2
AS-333C-L2 1.4 3 5 3.9 4 2.3 1" 75,000 333 10 Level 2
AS-444C-L2 1.7 3.75 4.9 3.5 5 2.7 1-1/4" 100,000 444 10 Level 2
AS-666C-L2 3 5.2 5.8 4.3 5.7 3 1-3/8" 150,000 666 10 Level 2
-
Visit our website at: 1711
Shackle-Chain
Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorptionCharpy Level 2 parts meet minimum of 50% shear Body: Forged Galvanized SteelBolt: Galvanized Steel Cotter Pin: Stainless Steel
Catalog Number
Dime
A (mm) (mm)
AS-199795WM 80 94
AS-133C 27 7
AS-25KC 22 65
AS-25KC100 22 100
AS-GDS-10 35 108
AS-1230C 55 200
AS-199795WM-L2 80 94
AS-133C-L2 27 71
AS-25KC-L2 22 65
AS-25KC100-L2 22 100
AS-GDS-10-L2 35 108
AS-1230C-L2 55 200
Preformed Line Products (Canada) Limited Visit our website at: www.preformed.on.ca Email: [email protected]
1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5 Phone: 519-740-6666 Fax: 519-740-7917
Page 28
eets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºCCharpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
ized Steel
Dimensions Rated Strength Standard Package
Charpy Rating
kN
LBS B
(mm) C
(mm) D
(in)
94 16 5/8” 120 26,900 25
70 16 5/8” 155 35,000 25
65 20 ¾” 111 25,000 25
100 20 ¾” 111 25,000 25
108 16 ¾” 160 36,000 25
200 55 1.75" 1230 276,000 25
94 16 5/8” 120 26,900 25
71 16 5/8” 155 35,000 25
65 20 ¾” 111 25,000 25
100 20 ¾” 111 25,000 25
108 16 ¾” 160 36,000 25
200 55 1.75" 1230 276,000 25
ºC
Charpy Rating
Level 1
Level 1
Level 1
Level 1
Level 1
Level 1
Level 2
Level 2
Level 2
Level 2
Level 2
Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 29
Shackle-Twisted
Twisted shackles are used with Twin Grip Suspension Units and for re-orientation of line fittings (i.e. 90 degree rotation). Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC
Catalog Number Dimensions
(mm) in Rated
Strength (kN)
Mass (kg)
Std Pkg
Charpy Rating
A B C
TS-0502C (80) 3.15” (30) 1.19” (15.8) 5/8" 120 0.75 25 Level 1
TS-0502C75 (80) 3.15” (30) 1.19” (19.05) 3/4" 120 0.75 25 Level 1
TS-0502C-L2 (80) 3.15” (30) 1.19” (15.8) 5/8" 120 0.75 25 Level 2
TS-0502C75-L2 (80) 3.15” (30) 1.19” (19.05) 3/4" 120 0.75 25 Level 2
Body: Forged Galvanized Steel Bolt: Galvanized Steel Cotter Pin: Stainless Steel
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 30
Chain Link
Chain Links are used to maintain tower clearance and connect associated hardware in an insulator string. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Material: Forged Steel
Catalog Number
Dimensions (inches) Rated Strength
(lbs)
Rated Strength
(kN)
Ultimate Breaking Strength
Charpy Rating A B C
CL-1010C 0.5 2.25 1 25,000 lbs 110 kN 127 kN Level 1
CL-30C 0.590 2.5 1 30,000 lbs 133 kN 153 kN Level 1
CL-40C 0.625 3.25 1 34,400 lbs 153 kN 176 kN Level 1
CL-50C 0.75 3.25 1 50,000 lbs 220 kN 253 kN Level 1
CL-60C 0.827 3.5 1 60,000 lbs 267 kN 307 kN Level 1 CL-80C 0.964 4.0 1.25 80,000 lbs 355 kN 408 kN Level 1
CL-100C 1.083 5.0 1.25 100,000 lbs 440 kN 506 kN Level 1
CL-120C 1.181 6.0 1.50 120,000 lbs 530 kN 610 kN Level 1
CL-200C 1.62 7.312 1.85 200,000 lbs 880 kN 1012 kN Level 1
CL-1010C-L2 0.5 2.25 1 25,000 lbs 110 kN 127 kN Level 2
CL-30C-L2 0.590 2.5 1 30,000 lbs 133 kN 153 kN Level 2
CL-40C-L2 0.625 3.25 1 34,400 lbs 153 kN 176 kN Level 2
CL-50C-L2 0.75 3.25 1 50,000 lbs 220 kN 253 kN Level 2
CL-60C-L2 0.827 3.5 1 60,000 lbs 267 kN 307 kN Level 2
CL-80C-L2 0.964 4.0 1.25 80,000 lbs 355 kN 408 kN Level 2
CL-100C-L2 1.083 5.0 1.25 100,000 lbs 440 kN 506 kN Level 2
CL-120C-L2 1.181 6.0 1.50 120,000 lbs 530 kN 610 kN Level 2
CL-200C-L2 1.62 7.312 1.85 200,000 lbs 880 kN 1012 kN Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 31
Strain Link
dimensions (mm)
Comes with two (2) hex nuts and two (2) self locking cotter pins. Meets CSA C83 requirements for energy absorption/toughness.
Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Body: Galvanized Steel Cotter Pins: Stainless Steel
Catalog Number
Rated Strength Charpy Rating LBS kN
SL-60C-L2 60,000 267 Level 2
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 32
Curved Base Dead End Tee
Curved base dead end tees are used to attach cables to the pole, cross arm or used as a cross brace tensioning point. Catalog number: CBDT78-1
Material: High Strength Galvanized Steel
Ultimate Tensile Strength: 60,000 LBS
Weight: 6 LBS
-
Visit our website at: 1711
Vari-Grip™ Dead-end
Preformed Line Products, Varapplications. The bottom section All components of these Vari-minimum energy absorption of 20 Joules Housing: Cast High Strength GalU Bolts: High Strength GalvanWedge: Cast Aluminum Rods: Galvanized steel
Catalog Number
(includes 1 top and 1
bottom assembly)
Top
Section
Bottom Section
VG-716S
VG-716T
VG-716B
VG-58S
VG-58T
VG-58B
VG-750S
VG-750T
VG-750B
VG-1000S
VG-1000T
VG-1000B
Other sizes are available upon Consult PLP ‘Energy Catalog’
Preformed Line Products (Canada) Limited Visit our website at: www.preformed.on.ca Email: [email protected]
1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5 Phone: 519-740-6666 Fax: 519-740-7917
Page 33
end
ari-Grip™ Dead Ends are used for tower, pole and antennaom section allows for 18” minimum of adjustability.
-Grip™ Dead Ends meet the CSA-C83 requiremof 20 Joules @ -20ºC.
Galvanized Steel nized Steel
(A) U Bolt
Dimension
(B) Thread Length
(C) U Bolt Length
(D) Rod
Length
(E) U Bolt Length
(F) Strand Size
Housing
5/8"
23"
29"
27"
12"
7/16" GR 220
3/4"
24"
30"
31"
17"
5/8" GR 220
1 1/4"
32"
36"
44"
14"
3/4" GR 220
1 1/4"
32"
36"
66"
14"
1" GR 220
upon request.
’ and ‘Tower & Antenna Catalog’ for non-Charpy V
tower, pole and antenna guying
ments for
(G) Housing Length
Rated
Strength
LBS
3.25"
23,800
3.25"
50,000
5"
68,000
5"
122,000
Charpy Vari-Grips™.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 34
Compression Dead-end Jumper Assembly (ACSR Drake) CMPDEJ-1108C
Meets CSA-C83 requirements for minimum energy absorption of 20 Joules @ -20ºC.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 35
Yoke Plates Meet CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Varying shapes, sizes, strengths, thicknesses and hole spacings are available. Contact PLP Canada for custom designs. Catalog Number: YP-5908C-02, Rated Stength (395 kN), 457mm spacing (Charpy Level 1)
Catalog Number: YP-TRIX500, Rated Strength (440 kN), 500mm spacing (Charpy Level 1)
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 36
Catalog Number: YP-QUAD, 457mm spacing (Charpy Level 1)
Catalog Number: YP-QUAD500, 500mm spacing (Charpy Level 1)
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 37
Bolt: Shoulder Eye
PLP Drop Forged Shoulder Eye Bolts are commonly used in Transmission and Distribution line work. The large shoulder eliminates the need for a washer under the eye. All Shoulder Eye Bolts are galvanized and come complete with one square or hex nut. All Bolts are tested to meet CSA C83.96 strength requirements and minimum energy absorption of 20 Joules @ -20 ºC. For hex nut, add H at the end of the catalog number
Catalog Number
Rated
Strength (lbs)
T (in)
A (mm)
B (mm)
C (mm)
Length (mm)
Standard Package
SEB58-6 14,100 LB
5/8 34 ± 1 13 ± .7 105 ± 3 155 ± 2.5 (6")
25
SEB58-8 14,100 LB
5/8 34 ± 1 13 ± .7 105 ± 3 200 ± 2.5 (8")
25
SEB58-10 14,100 LB
5/8 34 ± 1 13 ± .7 105 ± 3 250 ± 2.5 (10")
25 SEB58-12 14,100
LB 5/8 34 ± 1 13 ± .7 155 ± 3 300 ± 2.5
(12") 25
SEB58-14 14,100 LB
5/8 34 ± 1 13 ± .7 155 ± 3 350 ± 2.5 (14")
20
SEB58-16 14,100 LB
5/8 34 ± 1 13 ± .7 155 ± 3 400 ± 2.5 (16")
20 SEB58-18 14,100
LB 5/8 34 ± 1 13 ± .7 155 ± 3 450 ± 2.5
(18") 10
SEB34-6 28,500 LB
3/4 44 ± 1 15 ± .7 105 ± 3 155 ± 2.5 (6")
25
SEB34-8 28,500 LB
3/4 44 ± 1 15 ± .7 105 ± 3 200 ± 2.5 (8")
25
SEB34-10 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 250 ± 2.5 (10")
25
SEB34-12 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 300 ± 2.5 (12")
25
SEB34-14 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 350 ± 2.5 (14")
20
SEB34-16 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 400 ± 2.5 (16")
20 SEB34-18 28,500
LB 3/4 44 ± 1 15 ± .7 155 ± 3 450 ± 2.5
(18") 10
SEB34-20 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 508 ± 2.5 (20")
10
SEB34-22 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 560 ± 2.5 (22")
10
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 38
SEB34-24 28,500 LB
3/4 44 ± 1 15 ± .7 155 ± 3 610 ± 2.5 (24")
10
SEB78-08 29.900 LB
7/8 50 ± 1 18 ± .7 105 ± 3 200 ± 2.5 (8")
25
SEB78-10 29.900 LB
7/8 50 ± 1 18 ± .7 155 ± 3 250 ± 2.5 (10")
25 SEB78-12 29.900
LB 7/8 50 ± 1 18 ± .7 155 ± 3 300 ± 2.5
(12") 25
SEB78-14 29.900 LB
7/8 50 ± 1 18 ± .7 155 ± 3 350 ± 2.5 (14")
20
SEB78-16 29.900 LB
7/8 50 ± 1 18 ± .7 155 ± 3 400 ± 2.5 (16")
20 SEB78-18 29.900
LB 7/8 50 ± 1 18 ± .7 155 ± 3 450 ± 2.5
(18") 10
SEB78-20 29.900 LB
7/8 50 ± 1 18 ± .7 155 ± 3 508 ± 2.5 (20")
10
SEB78-22 29.900 LB
7/8 50 ± 1 18 ± .7 155 ± 3 560 ± 2.5 (22")
10
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 39
Bolt: Oval Eye
Forged Oval Eye Bolts are commonly used with thimbles, clevises and other pole line hardware items for overhead guying and dead-ending. Oval Eye Bolts are roll threaded and furnished with one square nut. Oval Eye Bolts have cone points to allow driving without damage to the threads; moreover, to make the engaging and threading of nuts quicker and easier. Length is measured from below the eye to the last thread. All Oval Eye Bolts are tested to meet CSA C83 strength requirements and Charpy V Notch testing minimum energy absorption of 20 Joules at -40ºC
5/8” Diameter Rated Strength: 14,100 LBS
¾” Diameter Rated Strength: 28,500 LBS
Catalog Number
Length (inches)
Thread Length (inches)
Catalog Number
Length (inches)
Thread Length (inches)
R-9408C 8 4 R-9504C 4 4 R-9409C 9 4 R-9508C 8 4 R-9410C 10 6 R-9510C 10 4 R-9412C 12 6 R-9512C 12 6 R-9414C 14 6 R-9514C 14 6 R-9416C 16 6 R-9516C 16 6 R-9418C 18 6 R-9518C 18 6 R-9420C 20 6 R-9520C 20 6 R-9422C 22 6 R-9522C 22 6
R-9424C 24 6 R-9524C 24 6
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 40
Bolt: 5/8” Ball Link Y-Eye
QTY DESCRIPTION PART
NUMBER ITEM
1 Ball Y-Clevis BYC-120C 1
1 Shoulder Eye Bolt, 5/8 SEB58-XX 2
Catalog Number (BLYEB58-XX)
Eye Bolt Length Thread
BLYEB58-06 SEB58-06 155 ± 2.5 (6") 5/8 - 11
BLYEB58-08 SEB58-08 200 ± 2.5 (8") 5/8 - 11
BLYEB58-10 SEB58-10 250 ± 2.5 (10") 5/8 - 11
BLYEB58-12 SEB58-12 300 ± 2.5 (12") 5/8 - 11
BLYEB58-14 SEB58-14 350 ± 2.5 (14") 5/8 - 11
BLYEB58-16 SEB58-16 400 ± 2.5 (16") 5/8 - 11
BLYEB58-18 SEB58-18 450 ± 2.5 (18") 5/8 - 11
Meet CSA C83.96 strength requirements & minimum energy absorption of 20 Joules @ -20ºC. Rated Strength: 15,000 lbs (62.8 kN) Factory assembled
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 41
Bolt: 3/4” Ball Link Y-Eye
QTY DESCRIPTION PART
NUMBER ITEM
1 Ball Y-Clevis BYC-120C 1
1 Shoulder Eye Bolt, 3/4 SEB34-XX 2
Catalog Number (BLYEB34-XX)
Eye Bolt Length Thread
BLYEB34-06 SEB34-06 155 ± 2.5 (6") 3/4 - 10
BLYEB34-08 SEB34-08 200 ± 2.5 (8") 3/4 - 10
BLYEB34-10 SEB34-10 250 ± 2.5 (10") 3/4 - 10
BLYEB34-12 SEB34-12 300 ± 2.5 (12") 3/4 - 10
BLYEB34-14 SEB34-14 350 ± 2.5 (14") 3/4 - 10
BLYEB34-16 SEB34-16 400 ± 2.5 (16") 3/4 - 10
BLYEB34-18 SEB34-18 450 ± 2.5 (18") 3/4 - 10
BLYEB34-20 SEB34-20 508 ± 2.5 (20") 3/4 - 10
BLYEB34-22 SEB34-22 560 ± 2.5 (22") 3/4 - 10
Meet CSA C83.96 strength requirements & minimum energy absorption of 20 Joules @ -20ºC. Rated Strength: 28,500 lbs (127 kN) Factory assembled
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 42
Bolt: 7/8” Ball Link Y-Eye
QTY DESCRIPTION PART
NUMBER ITEM
1 Ball Y-Clevis BYC-120C 1
1 Shoulder Eye Bolt, 7/8 SEB78-XX 2
Catalog Number (BLYEB78-XX)
Eye Bolt Length Thread
BLYEB78-08 SEB78-08 200 ± 2.5 (8") 7/8 - 9
BLYEB78-10 SEB78-10 250 ± 2.5 (10") 7/8 - 9
BLYEB78-12 SEB78-12 300 ± 2.5 (12") 7/8 - 9
BLYEB78-14 SEB78-14 350 ± 2.5 (14") 7/8 - 9
BLYEB78-16 SEB78-16 400 ± 2.5 (16") 7/8 - 9
BLYEB78-18 SEB78-18 450 ± 2.5 (18") 7/8 - 9
BLYEB78-20 SEB78-20 500 ± 2.5 (20") 7/8 - 9
BLYEB78-22 SEB78-22 560 ± 2.5 (22") 7/8 - 9
Meet CSA C83.96 strength requirements & minimum energy absorption of 20 Joules @ -20ºC. Rated Strength: 29,900 lbs (133 kN) Factory assembled
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 43
Washers: Square and Curved Square and Curved Square and Curved washers are used in conjunction with Machine, Double Arming, Oval Eye and Thimble Eye bolts.
Square Washers
*NEW* Catalog Number
Old Catalog Number
Thickness Size Hole Size
FWSQ-002-916-125 R-1073 1/8" 2" 9/16" FWSQ-002-1116-125 R-1074 1/8" 2" 11/16" FWSQ-002-1116-188 R-1074A 3/16" 2" 11/16" FWSQ-225-1116-188 R-1075 3/16" 2-1/4" 11/16" FWSQ-225-1316-188 R-1076 3/16" 2-1/4" 13/16" FWSQ-003-1316-188 R-1078 3/16" 3" 13/16" FWSQ-003-1316-250 R-1079 1/4" 3" 13/16" FWSQ-004-1516-125 R-1080 3/16" 4" 15/16" FWSQ-004-1516-375 R-1081 3/8" 4 15/16"
Curved Washers
*NEW* Catalog Number
Old Catalog Number
Thickness Size Hole Size
CWSQ-003-1116-250 R-0113 1/4" 3" 11/16" CWSQ-225-1116-188 R-0570 3/16" 2-1/4" 11/16" CWSQ-003-1316-250 R-6823 1/4" 3" 13/16" CWSQ-004-1316-188 R-6830 3/16" 4" 13/16" CWSQ-004-1316-250 R-6829 1/4" 4" 13/16" CWSQ-004-1316-375 R-6831 3/8" 4" 13/16"
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 44
Eye Nut Eye Nuts are tapped to fit hot dip galvanized bolts and are designed to develop strength ratings consistent with the bolts with which they are used.
Oval Eye (Hot Galvanized)
Oval Eye Nuts are used for dead-ending with suspension or strain insulators.
Catalog # Forged Steel Charpy
Fits Bolt Diameter (in)
EN-5C 5/8
EN-6C 3/4
Meets CSA Charpy Level 1 (minimum energy absorption of 20 Joules @ -20ºC)
Thimble Eye (Hot Galvanized) For attaching to through bolts or the threaded end of a straight or angled thimble eye bolt for straight away head guys.
Catalog # Forged Steel Charpy *
Fits Bolt Diameter (in)
Max Strand Size (in)
TEN-58C 5/8 1/2
TEN-34C 3/4 1/2
Meets CSA Charpy Level 1 (minimum energy absorption of 20 Joules @ -20ºC)
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 45
Twin Grip Suspension
Preformed Line Products Twin Grip suspension units are used to secure galvanized steel strand to the pole. Twin Grip Suspensions can be purchased with either an Aluminum or Galvanized Steel Sheave.
Catalog Number
Cable
Diameter
Approx. Applied
Length (L)
Sheave
Diam (D)
Sheave Material
Hole
Diam "
Sheave Number
Rod
Number
TGS-2500 1/4" 39" 2 7/8" Alum 13/16" 60213 4602100
TGSMS-3591D 1/4" 39" 2 7/8" Mal Iron 13/16" T-60192 4602100
TGSMS-3591 1/4" 39" 2 7/8" Alum 11/16" 60308 4602100
TGSMS-3591D11 1/4" 39" 2 7/8" Mal Iron 11/16" T-60192A 4602100
TGS-2502 5/16" 40” 2 7/8” Alum 13/16" 60213 4602102
TGSMS-4855D 5/16" 40” 2 7/8" Mal Iron 13/16" T-60192 4602102
TGSMS-4855 5/16" 40" 2 7/8" Alum 11/16" 60308 4602102
TGSMS-4855D11 5/16" 40" 2-7/8" Mal Iron 11/16" T-60192A 4602102
TGS-2503 3/8" 52" 3-3/8" Alum 13/16" 60211 4602103
TGSMS-4856D 3/8" 52" 3 3/8" Mal Iron 13/16" T-60108 4602103
TGSMS-4856 3/8" 52" 3 3/8" Alum 11/16" 60309 4602103
TGSMS-4856D11 3/8" 52" 3-3/8" Mal Iron 11/16" 60197 4602103
TGS-2504 7/16" 53" 3 3/8" Alum 13/16" 60211 4602104
TGSMS-4857D 7/16" 53" 3 3/8" Mal Iron 13/16" T-60108 4602104
TGSMS-4857 7/16" 53" 3 3/8" Alum 11/16" 60309 4602104
TGSMS-4857D11 7/16" 53" 3 3/8" Mal Iron 11/16" 60197 4602104
TGS-2505 1/2" 72" 4 1/2" Alum 13/16 60212 4602105
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 46
Suspension Plate
Catalog Number Rated Strength
SUSPL20K 20,000 lbs
SUSPL20KC 20,000 lbs Meets CSA C83 requirements for minimum energy absorption of 20 Joules @ -20C
Material: Galvanized Steel
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 47
Suspension Plate Flat
Catalog Number Rated Strength
SUSPL20K-FLAT 20,000 lbs
Meets CSA C83 requirements for minimum energy absorption of 20 Joules @ -20C. Material: Galvanized Steel
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 48
Sag Adjustment Assembly
Preformed Line Products Sag Adjustment Assembly is used to equalize the tension of bundled conductors. SAG-ADJ-155 (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) SAG-ADJ-155-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption/toughness.
Rated Strength: 222 kN (49,900 lbs) Ultimate Breaking Strength: 255 kN (57,300 lbs) Galvanized to CSA G164 Bolts: Grade A-325 Galvanized steel, size 7/8” Cotter Pins: Stainless Steel Unit Weight: 28lbs
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 49
SAG-ADJ-50K (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) SAG-ADJ-50K-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption/toughness.
Rated Strength: 222 kN (49,900 lbs) Galvanized to CSA G164 Bolts: Grade A-325 Galvanized steel, size 3/4” Cotter Pins: Stainless Steel Unit Weight: 28lbs
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 50
SAG-ADJ-100K (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) SAG-ADJ-100K-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption/toughness.
Rated Strength: 444 kN (100,000 lbs) Ultimate Breaking Strength: 511 kN (114,000 lbs) Galvanized to CSA G164 Bolts: Grade A-325 Galvanized steel, size 1-1/4" Cotter Pins: Stainless Steel Unit Weight: 90 lbs
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 51
Flexible Ground Wire Assemblies
Catalog Number Length (L)
Diameter (D)
Description
710010015SS
4 feet
0.250”
#4, 7 strand x 85 strand, 32 gauge, tinned Copper with 2 lugs
710010015SP
4 feet
0.450”
1/0, 19 strand x 60 strand, 30 gauge, tinned Copper, with 2 lugs
Note: 2 bolts, 2 lock washers and 2 hex nuts (as shown) are included in each assembly.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 52
Extension Link 71002366C (Charpy Level 1 part meets minimum energy absorption of 20 joules @ -20ºC) 71002366C-L2 (Charpy Level 2 part meets minimum of 50% shear fracture @ -45 ºC) Meet CSA C83 requirements for energy absorption / toughness.
• Rated Strength: 130 kN (29,200 lbs)
• Galvanized per CSA G164
• Body: Galvanized Steel
• 5/8" Bolt: Galvanized Steel
• Cotter Pin: Stainless Steel
Approx weight: 2 LBS
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 53
Extension Strap
Catalog #
(A)
Overall Length
(in)
(B)
Thickness (in)
(C)
Hole Centers Length
(in)
(D)
Hole Diameter
(in)
(E)
Width (in)
Rated
Breaking Strength
(lbs)
Approx Weight
(lbs) Charpy Rating
ES-30-05CX500 8.0 0.5 5.0 0.83 3.0 30,000 2.9 Level 1
ES-50-05CX750 8.0 0.75 5.0 0.83 3.0 50,000 4.4 Level 1
ES-30-08C 10.0 0.5 8.0 0.83 2.0 30,000 2.6 Level 1
ES-30-09C 10.5 0.63 9.0 0.69 1.5 26,900 2.6 Level 1
ES-30-12C 14.5 0.63 12.0 0.83 2.5 30,000 5.9 Level 1
ES-30-14C 16.0 0.63 14.0 0.69 2.0 30,000 6.4 Level 1
ES-30-48C 50.5 0.63 48.0 0.83 2.5 30,000 22.0 Level 1
ES-30-54C 56.5 0.63 54.5 0.83 2.0 30,000 19.8 Level 1
ES-31 35.4 1.0 31.5 1.30 4.0 100,000 37.8 Level 1
ES-50-04C 7.0 0.75 4.0 0.83 3.0 50,000 Level 1
ES-50-06C 10.8 0.79 8.8 0.87 2.0 50,000 4.3 Level 1
ES-50-09C 12.0 0.75 9.0 0.83 3.0 50,000 7.1 Level 1
ES-50-16C 18.5 0.75 16.0 0.83 2.5 50,000 9.1 Level 1
ES-50-24C 26.5 0.75 24.0 0.83 2.5 50,000 13.3 Level 1
ES-75-16C 18.5 0.75 16.0 0.83 2.5 75,000 9.3 Level 1
ES-75-32C 35.4 1.0 32.0 1.22 3.3 75,000 31.97 Level 1
ES_100-09C 13.0 1.0 9.0 1.34 4 100,000 14 Level 1
ES-100-18C 21.9 1.0 18.0 1.34 4 100,000 23.1 Level 1
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 54
Catalog #
(A) Overall Length
(in)
(B)
Thickness (in)
(C)
Hole Centers Length
(in)
(D)
Hole Diameter
(in)
(E)
Width (in)
Rated
Breaking Strength
(lbs)
Approx Weight
(lbs) Charpy Rating
ES-30-05CX500-L2 8.0 0.5 5.0 0.83 3.0 30,000 2.9 Level 2
ES-50-05CX750-L2 8.0 0.75 5.0 0.83 3.0 50,000 4.4 Level 2
ES-30-08C-L2 10.0 0.5 8.0 0.83 2.0 30,000 2.6 Level 2
ES-30-09C-L2 10.5 0.63 9.0 0.69 1.5 26,900 2.6 Level 2
ES-30-12C-L2 14.5 0.63 12.0 0.83 2.5 30,000 5.9 Level 2
ES-30-14C-L2 16.0 0.63 14.0 0.69 2.0 30,000 6.4 Level 2
ES-30-48C-L2 50.5 0.63 48.0 0.83 2.5 30,000 22.0 Level 2
ES-30-54C-L2 56.5 0.63 54.5 0.83 2.0 30,000 19.8 Level 2
ES-31-L2 35.4 1.0 31.5 1.30 4.0 100,000 37.8 Level 2
ES-50-04C-L2 7.0 0.75 4.0 0.83 3.0 50,000 Level 2
ES-50-06C-L2 10.8 0.79 8.8 0.87 2.0 50,000 4.3 Level 2
ES-50-09C-L2 12.0 0.75 9.0 0.83 3.0 50,000 7.1 Level 2
ES-50-16C-L2 18.5 0.75 16.0 0.83 2.5 50,000 9.1 Level 2
ES-50-24C-L2 26.5 0.75 24.0 0.83 2.5 50,000 13.3 Level 2
ES-75-16C-L2 18.5 0.75 16.0 0.83 2.5 75,000 9.3 Level 2
ES-75-32C-L2 35.4 1.0 32.0 1.22 3.3 75,000 31.97 Level 2
ES_100-09C-L2 13.0 1.0 9.0 1.34 4 100,000 14 Level 2
ES-100-18C-L2 21.9 1.0 18.0 1.34 4 100,000 23.1 Level 2
Meet CSA C83 requirements for energy absorption/toughness.
Charpy Level 1 parts meet minimum energy absorption of 20 joules @ -20ºC Charpy Level 2 parts meet minimum of 50% shear fracture @ -45 ºC Galvanized per CSA G164
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 55
Extension Straps with Anchor Shackle(s) ES-30-14CAS
ES-30-09CASX2
Catalog #
AS-133C Shackle quantity
Rated
Strength (lbs)
Bolt Size (in)
Overall Length -
Hole Centers (in)
Charpy Rating
ES-30-14CAS 1 30,000 5/8” 18.25” Level 1
ES-30-14CASX2 2 30,000 5/8” 20.75” Level 1
ES-30-09CAS 1 26,900 5/8” 11.5” Level 1
ES-30-09CASX2 2 26,900 5/8” 14” Level 1
Meet CSA-C83 minimum energy absorption of 20 joules at -20ºC
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 56
Tie Top Neutral Wire Bracket
Preformed Line Products’ Neutral Wire Brackets can be ordered in either Aluminum Alloy or Hot Dipped Galvanized Steel. Non-insulated neutral wire brackets are used on rural lines. Both types accommodate up to ½” or smaller neutral wires that are tied into the groove. Neutral wire brackets are tested to CSA-C83 specifications A 5/8” lag or through bolt is required to attach the bracket to the pole. Standard Package 50
Catalog Number Description
T-NWB-5A Aluminum Alloy
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 57
Bolted Neutral Wire Bracket with Clamp
The bolted neutral wire bracket (with clamp) is advantageous over the tip top neutral wire bracket; because it does not require tie wire due to its clamping mechanism.
A 5/8” threaded bolt is required to attach the bracket to the pole. The base is threaded. Material: Aluminum Alloy
Catalog Number Neutral Wire Diameter
BNWB-1100 0.800”-1.100”
Contact PLP Canada for additional sizes.
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 58
Clamp: Cable Suspension
Preformed Line Products’ Cable Suspension Clamps are used with through bolts which serve as a clamping member and are shaped to securely grip messenger wire to the pole. A nut and square washer is used between the clamp and the pole to provide proper spacing. Cable suspension clamps are tested to CSA-C83 specifications.
Catalog Number
Bolt Quantity
Clamp Bolt Diameter (Inches)
Clamp Length (Inches)
Mounting Hole Diameter (Inches)
Strand Diameter (Inches)
Standard Package
B-CSC-8 2 1/2" 5 - 1/2" 11/16x15/16 1/4 to 7/16 25
-
Preformed Line Products (Canada) Limited
Visit our website at: www.preformed.on.ca Email: [email protected] 1711 Bishop Street, Cambridge, Ontario, Canada, N1T 1N5
Phone: 519-740-6666 Fax: 519-740-7917
Page 59
Guy Hook
Guy hooks are used to secure guy wires to pole structures. Guy hooks have cast integral spurs on the back to grip the pole to eliminate turning of the guy hook. They can be mounted with either a 5/8” or ¾” bolt. Material: Galvanized Ductile Iron Catalog Number: GH-34 Standard Package 25 Meets CSA-C83 specifications, item standard C83.100-96.