polar-bear_i_e_a4
TRANSCRIPT
-
7/27/2019 polar-bear_i_e_a4
1/4
Attach the triangular glue tabs so that the front side becomes convex.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.
Notation Key
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler A1, B1
Tools
Scissors line
Mountain fold
Valley fold
Glue spot
Parts No.
The Assembly instructions are divided into three blocks:
A (head), B (body), C (legs).
Follow the instructions for each block to assemble your polar
bear.
marks a basic assembly technique that remains the same
regardless of the part. Instructions are printed only for the first
instance.
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Scissors line
Triangular glue tab
Glue spot
Parts No.
Assemble the headA
Use pattern: Page2 / Page3.
Cut out A1 by cutting along the lines.
Cut along the line marked .
Parts name
Cut a slot right
in to the apex of
the triangular gluetab.
A1
A1
A1
A1
Polar Bear : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Make a valley fold on A1.Trace along the valley fold line with a pencil, scoring it tomake it easier to fold.
Using the photo as a guide, apply pressure with the palm of your hand,
gradually curling the paper in the direction of the arrow.
The parts will be easier to assemble if curled.
-
7/27/2019 polar-bear_i_e_a4
2/4
Assemble A9, and attach it to the head.
A3A4
A2
A4
A2
A1
A8
A5 A5A6
A1
A8 A7
A1
A5A6
A11 A10
A11
A10
A9
A9
A1
A9
A2
A3
Put glue on this part, and glue together.
Put glue on the back of the part here. Glue it along the line.
Put glue on the back of the part here.
B2
B2
B3
B1
B1
B1
B3B2 B2B3
Polar Bear : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Assemble the body
Use pattern: Page4 / Page5 / Page6.B
Assemble A2, A3 and A4.
Attach the head and mouth together.
Assemble A5 and A6, and attach them to the head.
Glue A7 and A8 to the throat.
Glue A10 and A11 to the neck, and the head is complete.
Assemble B2 and B3, and attach them to B1.
-
7/27/2019 polar-bear_i_e_a4
3/4
Polar Bear : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
B4
B2
B1
A9
B5
B2
B4
B5
B1
B4B6
B7
B8
B6
B6B7
B7
B8
B4
B5
B7
C1
C1
C2
C1C2
B3
B2B2
B6
Page
Assemble the legs
Use pattern: Page7 / Page8.CAssemble C1 and C2.
Assemble B6 to the body.
Assemble B7 and B8, attach them to the body, andthe body is complete.
Assemble B4 and B5.
Assemble the head and body together.
Attach C1 and C2 to the body.
Assemble B1, B2, B3, B4 and B5.
-
7/27/2019 polar-bear_i_e_a4
4/4
C4
C3 C5
C6
C4
C3
C1C2
C1 C4
C6
C7
C7
C7
C8 C9
C10
C7
C8
C7
C9
C10
B8
B8
C5C6
B7
Put glue on the back of the part here.Put glue on the back of the part here.
C3
B7
C11
C12
C13
C14
C15
B6
B4
B4
B2
B3
C1
C2
C13
C11
C5
Polar Bear : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Assemble C3, C4, C5 and C6.
Attach C3 and C4 in turn to B7, and attach C5and C6 in turn to B8.
Assemble C7, C8, C9 and C10.
Without adding glue, fit the feet to the legs so that they standon the ground. Next, attach them together with glue.
There are no glue tabs,
so glue along the line.
Put glue on the back of the part here.
Glue C11 and C12 to the body, and glue C13 and C14 to the frontlegs. Next, glue C15 to the body, and your polar bear is complete.