poinsettia pavilion just kisses - robert kaufman fabrics · template 11 poinsettia pavilion...
TRANSCRIPT
Just KissesDesigned by Robert Kaufman Fabricswww.robertkaufman.com
Featuring
POINSETTIA PAVILION
For questions about this pattern, please email [email protected].
Finished quilt measures: 71” x 82”
page 2
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage
APTM-15767-223 HOLIDAY
APTM-15761-91 CRIMSON
APTM-15761-7 GREEN
APTM-15761-223HOLIDAY
APTM-15761-14 NATURAL
APTM-15762-2 BLACK
APTM-15764-133 GOLD
APTM-15760-2 BLACK
APTM-15763-2 BLACK
APTM-15761-2 BLACK
APTM-15759-223 HOLIDAY
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 40” wide.
A
B
C
D
E
F
G
H
I
J
K
2/3 yard
1/2 yard
2/3 yard
7/8 yard
1-3/8 yards
2/3 yard
2/3 yard
1/4 yard
1 yard
1 yard
2-1/2yards
Fabric and Supplies Needed
Copyright 2016, Robert KaufmanFor individual use only - Not for resale
You will also need:5 yards for backing
1/4 yard of fusible web for appliqué (optional)
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted.- Width of fabric (WOF) is equal to at least 40” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
Notes Before You Begin
page 3
TIP: To speed up cutting and maximize yardage, cut a WOF strip the width of the most narrow part of your template piece, then subcut using the template
Cutting Instructions
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
POINSETTIA PAVILIONTEMPLATE 1
From Fabric A, cut:twenty-four each from Template 5-REVERSED, Template 6, and Template 7.
From Fabric B, cut:twenty-four each from Template 4, Template 5, and Template 6-REVERSED.
From Fabric C, cut:twenty-four each from Template 5-REVERSED, Template 6, and Template 7.
From Fabric D, cut:twenty-four each from Template 4, Template 5, and Template 6-REVERSED.thirty-six Template 12 pieces
From Fabric E, cut:ninety-six from Template 1 ninety-six from Template 2forty-eight from Template 3twenty-eight from Template 10sixteen from Template 11
From Fabric F, cut:fi ve 2-1/4” x WOF strips. - Trim two to 2-1/4” x 40” and sew three remaining strips together, end-to-end, trimming to yield two 2-1/4” x 48-1/2” . Set aside for the fi rst inner border strips.six Template 8 pieces. Note: To hide all raw edges and use needle turn appliqué, cut at the dotted line. To use raw edge appliqué, cut at the solid line, referring to the instructions at Step 8.
From Fabric G, cut:three 2-3/4” x WOF strips. - Sew the strips together, end-to-end, trimming to yield two 2-3/4” x 52” strips. Set aside for the second inner border side strips.two 2-1/4” x 44-1/2” strips* - Set aside for the second inner border top and bottom strips.
*Note: If your fabric is not 44-1/2” wide, sew three 2-1/4” x WOF strips together. Trim off 10” and discard. Then trim to yield two 2-1/4” x 44-1/2” strips.six Template 8 pieces. Note: To hide all raw edges and use needle turn appliqué, cut at the dotted line. To use raw edge appliqué, cut at the solid line, referring to the instructions at Step 8.
From Fabric H, cut:four 8-1/2” x 8-1/2” squares
page 4
From Fabric I, cut:eighteen Template 9 pieces
From Fabric J, cut:eight 2-1/2” x WOF strips for bindingthirty-six Template 12 pieces
From Fabric K, cut:Cutting along the length of the fabric, fussy cut two 6” x 84” side borders and two 6” x 73” top and bottom borders. Note that the borders will meet in a miter at the corner, so extra care should be taken when fussy cutting and selecting which edge is pinned to the quilt for sewing.
Step 1. Sew a Fabric E, Template 2 piece to the Fabric A, Template 7 piece, as illustrated. Repeat for all remaining Fabric A, Template 7 pieces.
Assemble the A Blocks
Fabric E, Template 2
Fabric A, Template 7
Step 2. Sew a Fabric E, Template 1 piece to the Fabric A, Template 6 piece, as illustrated. Press toward the darker fabric. Then sew a Fabric B, Template 5 piece to the opposite side of the Template 6 piece. Repeat for all remaining Fabric A, Template 6 pieces.
Step 3. Sew one completed Step 1 and Step 2 unit together, as shown. Press the seam open.
page 5
Step 4. Sew a Fabric E, Template 3 piece to the Fabric B, Template 4 piece, as illustrated. Press toward the darker fabric. Then sew a Fabric E, Template 2 piece to the Template 4 unit. Repeat for all remaining Fabric B, Template 4 pieces.
Step 5. Sew a Fabric E, Template 1 piece to the Fabric B, Template 6-REVERSED piece, as illustrated. Press toward the darker fabric. Then sew a Fabric A, Template 5 REVERSED piece to the opposite side of the Fabric B piece. Repeat for all remaining Fabric B, Template 6-REVERSED pieces.
Fabric E, Template 3
Fabric E, Template 2
Fabric B, Template 4
Step 6. Sew one completed Step 4 and Step 5 unit together, as shown. Press the seam open.
Step 7. Sew the two halves together along the longest edge. Press the seam open. Repeat to make six A Blocks.
page 6
Step 9. Appliqué the Fabric F, Template 8 pieces to the center of each block. You may either use the needle turn method to hide the raw edges OR fuse the fabric to half of the fusible web, trace the template at the solid line and then cut and fuse the circle in place at the center of the block, edgestitching to fi nish.
Step 10. Repeat the process used in the A Blocks, using the template pieces cut from Fabrics C, D, E and G. Make six B Blocks.
Assemble the B Blocks
Step 8. Arrange four blocks as illustrated and sew into two rows of two units to create each block. Repeat to make six blocks.
page 7
Fabric E, Template 2
Fabric C, Template 7
Fabric E, Template 3
Fabric E, Template 2
B Block - Step 1.
B Block - Step 2.
B Block - Step 3. B Block - Step 4.
B Block - Step 5. B Block - Step 6.
B Block - Step 7.
B Block - Step 8.
page 8
Step 11. Sew a 48-1/2” Fabric F strip to the sides of the quilt center. Press toward the border. Sew a 40” Fabric F strip to the top and bottom of the quilt center. Press toward the border.
Step 12. Sew a 2-3/4” x 52” Fabric G strip to the sides of the quilt center. Press toward the border. Sew a 2-1/4” x 44-1/2” Fabric G strip to the top and bottom of the quilt center. Press toward the border.
Step 13. Sew two Fabric D, Template 12 pieces to a Fabric E, Template 10 piece as illustrated. Press toward the darker fabric. Repeat to create fourteen units like this.
Add the Inner Borders
Assemble and Add the Pieced Border
Fabric D, Template 12
Fabric D, Template 12
Fabric E, Template 10
Fabric J, Template 12
Fabric J, Template 12
Fabric E, Template 10
Step 14. Repeat Step 12, using Fabric Fabric J, Template 12 pieces with the Fabric E, Template 10 pieces. Press toward the darker fabric. Repeat to create fourteen units like this.
Step 15. Sew four of each of the following units, pressing toward the darker fabric.
Fabric J, Template 12
Fabric J, Template 12
Fabric E,Template 11
Fabric E,Template 11
Fabric E,Template 11
Fabric E,Template 11
B Block - Step 9.
page 9
Step 16. Piece the border as illustrated. Offset the points as shown.
Top Border
Offset Detail
Side Border
Step 17: Sew a cornerstone to the ends of both top and bottom borders. Center and pin one side outer border to the quilt top. Sew the border, starting and stopping 1/4” from each end of the quilt top. Repeat for three other sides.
Add the Outer Borders and Miter the Corners
Fabric I, Template 12
Fabric J, Template 12Pieced together in previous step.Wrong side of these fabrics shown.
Fabric E, Template 10
page 10
Step 18. Fold the quilt diagonally, right sides together and align two of the borders directly on top of each other.Use your ruler to draw a line from the corner of the quilt to the edge of the border.
Step 19. Trim off excess border along line and sew 1/4” in from the edge. Begin at the point where your border stitching had ended and sew to the edge of the border.
Your quilt top is complete! Baste, quilt, bind and enjoy!
page 11
Templates
1” box for scale
POIN
SETTI
A PAVILIO
N
TEMPLA
TE 1
POINSETTIA
PAVILION
TEMPLATE 2
POIN
SETTI
A
PAVILIO
N
TEMPLA
TE 3
POIN
SETT
IA P
AVI
LIO
NTE
MPL
ATE
7
POIN
SETTIA PA
VILION
TEMPLA
TE 5
POIN
SETTIA PA
VILION
TEMPLA
TE 6
POIN
SETTIA
PAVILIO
NTEM
PLATE 4
page 12
POINSETTIA PAVILION
TEMPLATE 9
1” box for scale
page 13
POINSETTIA PAVILIONTEMPLATE 8
1” box for scale
POINSETTIA PAVILIONTEMPLATE 10
POINSETTIA PAVILIONTEMPLATE 11
POIN
SETTIA PA
VILION
TEMPLA
TE 12