pocket guide to cold applied liquid waterproofing - laydex · pocket guide to cold applied liquid...

11
Pocket Guide to Cold Applied Liquid Waterproofing Flat Roofs | Green Roofs | Balconies | Walkways | Podia | Terraces abc

Upload: hoangthuy

Post on 12-Apr-2018

232 views

Category:

Documents


4 download

TRANSCRIPT

Pocket Guide to Cold Applied Liquid Waterproofing

Flat Roofs | Green Roofs | Balconies | Walkways | Podia | Terraces

abc

Contents

Tremco Cold AppliedWaterproofing Systems Page No.

Introduction 4

Rapid Cure Roofing System

Tremco CR360 / CP930 6

Low Odour Roofing System

Tremco LWS 25 CR320 / CR325 8

Buried Membrane for Concrete Substrates

Tremco CP250 10

Balcony and Walkway Coating System

Tremco CP350 / CP951 12

Decorative Balcony & Walkway Coating System

Tremco CP310 14

Coverage & Packaging Guide 16

Primer Table 18

First for Performance

Cold Applied Liquid WaterproofingFlat Roofs | Green Roofs | Balconies | Walkways | Podia | Terraces

A Choice of Systems to Match Your Needs With nearly 85 years’ experience in waterproofing buildings and structures, we know that projects vary greatly in terms of site conditions, application restrictions and client expectations. Common sense tells us that the concept of ‘one system fits all’ simply doesn’t work. This is why we offer a range of liquid coating systems to meet your individual circumstances and requirements, be they on new build or refurbishment projects.

Adding Value To . . .

Building Owners – Peace of mind is ultimately what we seek to deliver. Our products will do what they claim to do, that is waterproof your structure and protect your asset. Recommended installers get the job done right first time. Our high performance systems help minimise future maintenance liabilities.

Specifiers/Designers – We will provide tailored solutions that match your needs, supported with technical assistance from the design stage through to pre-start meetings and on-going project support on site.

Contractors – Cost effective products designed with the demands of real-life site application in mind. We provide training for new operatives at our in-house facilities. On-site, technical support is in place to ensure an effective application. A smooth supply chain delivers products where and when you need them.

4 | | 5

Support for You

• Conditionsurveysand fault identification

• Detailingrecommendations

• Methodstatements

• SpecificationsincludingNBS

• RIBAapprovedCPD

• CADdrawings

• Experton-sitesupport

• Recommendedcontractors

• Warranties

Warm Roofs Inverted Roofs Cold Roofs

Paved Roofs Green Roofs Planters & Water Features

Balconies Walkways Buried Membranes

Tremco LWS 25(Tremco CR320/325)

Effective solutions for:

Repoma (Tremco CR360)

6 | | 7

Rapid Cure Roofing System

Tremco CR360/CP930 Repoma A unique roof waterproofing system based on PUMA technology, incorporating the flexibility and crack bridging of polyurethane and the key benefits of methacrylate resins.

Tremco CR360 Repoma Heavy Duty Waterproof CoatingTremco CP930 Coloured Sealer Coat (optional)

Suitable for:

• Exposedflatorslopingroofs

• Year round roofing projects

• New build or refurbishment of existing, structurally sound roofs

Suitable Substrates

• Roofing felt • Wood

• Mastic asphalt (roofing grade) • Metals

• PVC single ply membranes • Concrete

Durability Under normal service conditions the system will provide a durable waterproof covering with a service life of at least 10 years.

Key Features

• Very fast curing – 30 minutes at 15°C

• Possibility to apply at very low temperatures (0°C)

• No primer needed on most substrates

• Excellentthermalresistance-30°Cto+90°C

• Cold applied – no hazardous hot works

• Seamless & fully bonded

• High elasticity and crack bridging

• High vapour permeability

• TestedinaccordancewithETAG005 To request technical or specification assistance

) 01942 251400 * [email protected]

Asphalt Substrate

��

Main Application Areas

Warm Roofs Inverted Roofs Cold Roofs

Paved Roofs Green Roofs Planters & Water Features

System Build-Up Example

1. Tremco CR360 Waterproof Coating - Light Grey

2. Tremco CP581 Fleece Reinforcement Membrane

3. Tremco CR360 Waterproof Coating - Light Grey

4. Tremco CP930 Coloured Sealer Coat (optional)

Colours: RAL 7016 Dark Grey, RAL 7037 Medium Grey, RAL 6024 Green, RAL 5017 Blue and RAL 3020 Red

Ancillary Components

Tremco CP510 - Initiator for CR360

Tremco CP592 - Pigment for CP930

Tremco CP150 - Primer for concrete, cement & wood

Tremco CR520 - Thixotropic filler for CR360 for upstands

Application Detail

Refer to current product Technical Data Sheets.

8 | | 9

Low Odour Roofing System

Tremco LWS 25 CR320 / CR325 A roof waterproofing system comprising two, single part, moisture curing, polyurethane coatings, reinforced with an embedded fibreglass matting.

Tremco CR320 Base Coat

Tremco CR325 Top Coat

Suitable for:

• Exposedflatorslopingroofswithlimitedaccess

• New build or refurbishment of existing structurally sound roofs

An optional wearing course is available for areas subject

to regular foot traffic.

Suitable Substrates

• Roofing felt • Wood

• Mastic asphalt (roofing grade) • Metals

• PVC single ply membranes • Concrete

Durability Under normal service conditions the system will provide a durable waterproof covering with a service life up to 25 years.

Key Features

• Excellentdurability

• Weather resistant

• Cold applied – no hazardous hot works

• Seamless & fully bonded

• UV resistant

• Accommodates complex shapes and penetrations

• Single component

• BBA certification To request technical or specification assistance

) 01942 251400 * [email protected]

Asphalt Substrate

���

Main Application Areas

Warm Roofs Inverted Roofs Cold Roofs

Paved Roofs Green Roofs

System Build-Up Example

1. Tremco CR320 Base Coat - Red

2. Tremco CR510 Reinforcement Matting - 100 gsm

3. Tremco CR320 Base Coat - Red

4. Tremco CR325 Top Coat - Light Grey

Ancillary Components

Tremco CR100 Concrete & Asphalt Primer

Tremco CR110 Metal Primer

Tremco CR300 Fibre Reinforced Coating

Tremco CR525 Reinforcement Matting - 225 gsm

Application Detail

Refer to current product Technical Data Sheets.

10 | | 11

Buried Membrane for Concrete Substrates

Tremco CP250 An elastomeric waterproofing membrane for unexposed applications. Comprising a single part, rapid curing, modified polyurethane coating that can be applied to ‘green’ or damp concrete. Available in self-leveling and trowelable grades.

Suitable for:

• Unexposed waterproofing applications

• Vertical and horizontal substrates

• New build or refurbishment projects

Suitable Substrates

• Concrete

Durability Under normal service conditions the system will provide a durable waterproof covering with a service life in excess of 20 years.

Key Features

• Membrane applied in a single coat without primer in most cases

• Can be applied directly to damp or green concrete without priming

• Rapid curing – can be overlaid in as little as 4 hours

• Self-leveling & trowelable grades

• Cold applied – no hazardous hot works

• Seamless & fully bonded

• Highly elastomeric To request technical or specification assistance

) 01942 251400 * [email protected]

Concrete Substrate

��

Main Application Areas

Paved Roofs Inverted Roofs Green Roofs

Planters Buried Membranes

System Build-Up Example

1. Tremco CP250 Waterproof Membrane 2. Tremco CP620 Heavy Duty Protection Course 3. Tremco CP650 Multi-Composite Drainage & Protection Mat* * See data sheet for availablity of different grade options.

Ancillary Components

TremcoCP600DualflexReinforcement

Tremco CP610 Dualdrain Reinforcement

Tremco CP630 Protection Sheet

Tremco CP640 Root Barrier

Application Detail

Refer to current product Technical Data Sheets.

12 | | 13

Balcony and WalkwayCoating System

Tremco CP350 / CP951 A balcony and walkway waterproofing system comprising two modified polyurethane coatings

Tremco CP350 Base Coat - Single part elastomeric coating

Tremco CP951 Top Coat - Two part wearing coating

Suitable for:

• Exposedandunexposedsurfaces

• Areas subject to pedestrian and vehicular traffic

• New build or refurbishment projects

Suitable Substrates

• Concrete & cementious screeds

• Timber

Durability Under normal service conditions the system will provide a durable waterproof covering with a service life of at least 10 years.

Key Features

CP350

• Highly elastomeric coating – excellent crack bridging properties

• Self-levelling

• Fast curing – overcoat in as little as 6 hours

CP951

• Extremelytoughwithexcellentabrasionresistance

• Fast curing – usually able to receive light foot traffic within 24 hours depending on temperatures and site conditions

• Can be applied over existing polyurethane coatings To request technical or specification assistance

) 01942 251400 * [email protected]

Concrete Substrate

��

Main Application Areas

Balconies Walkways

System Build-Up Example

1. Tremco CP171 Concrete Primer

2. Tremco CP350 Base Coat - Grey

3. Tremco CP951 Top Coat Colours: RAL 3020 Red, RAL 5017 Blue, RAL 6024 Green, RAL 7016 Grey, RAL 7037 Light Grey, RAL 9005 Black

4. Tremco CP508 - a medium-fine natural quartz sand

Ancillary Components

Tremco CP191 Reactivator - for overcoating existing PU coatings

Tremco CP590 Colourpaste - for use with Tremco CP951

Application Detail

Refer to current product Technical Data Sheets.

14 |

Decorative Balcony and Walkway Coating System

Tremco CP310 A balcony and walkway waterproofing system comprising a single part, elastomeric, polyurethane coating applied in one layer. Single colour or decorative flake finishes available.

Suitable for:

• Exposedsurfaces

• Areas subject to pedestrian traffic

• New build or refurbishment projects

Suitable Substrates

• Concrete & cementious screeds

• Timber

Durability Under normal service conditions the system will provide a durable waterproof covering with a service life of at least 10 years.

Key Features

• Membrane applied in a single coat

• Touch dry after 2 hours, fully cured after 6 hours

• Maybescatteredwithflakestoprovideadecorativefinish

• Elastomericthroughcompletesystem

• Contains biocide, effective against micro-organisms

• Exceptionalabrasionresistance

| 15

To request technical or specification assistance

) 01942 251400 * [email protected]

Concrete Substrate

��

Main Application Areas

Balconies Walkways

System Build-Up Example

1. Tremco CS175 Dry Substrate Primer

TremcoES200WetSubstratePrimer

2. Tremco CP310 Flexible PU Wearing Membrane - Grey

3. Tremco CS681 Decorative Flake Blend Colours: Grey, Black/Grey, Brown/Beige, Beige, Blue and Red.

Application Detail

Refer to current product Technical Data Sheets.

16 |

Coverage & Packaging Guide

Product Description Unit Size Approximate Coverage/ Unit

Rap

id C

ure Ro

of S

ystem

TremcoCR360

Waterproofing Coating

25 kg 8.1 m²

TremcoCP930

Coloured Sealer Coat

25 kg 66.7 m²

Tremco CP581

Fleece Reinforcement

150 mm x 98.8 m roll1020 mm x 98.8 m roll

98.8 lm100.0 m²

TremcoCP510

Initiator for use with CR360

2 kg25 kg

32.4 m²405.0 m²

TremcoCP150

Primer Concrete, Cement & Wood

20 kg 50.0 m²

Tremco CP592

Micronised Pigment Powder

for use with CP930

25 kg1 kg per 10 kg of

CP930

TremcoCR520

Thixotropic Filler 10 kg 178.6 m²

Low

Od

our R

oo

f System

TremcoCR320

Base Coat 12.5 litres 12.5 m²

TremcoCR325

Top Coat 12.5 litres

25.0 m² 10 year system

16.0 m² 15 year system

12.5 m² 20/25 year system

TremcoCR510

ReinforcementMatting - 100

gsm1 m x 150 m roll 150.0 m²

Tremco CR525

ReinforcementMatting - 225

gsm1 m x 112 m roll 112.0 m ²

TremcoCR100

Primer Concrete &

Asphalt5 litres 20.0 m²

TremcoCR110

Primer Metal

5 litres 110.0 m²

TremcoCR300

Fibre Reinforced Coating

5 litres 8.0 m²

| 17

Product Description Unit Size Approximate Coverage/ Unit

Buried

Mem

brne

TremcoCP250

Waterproof Coating

Self-LevellingTrowelable

21.6 litres

12.0 litres

9.8 m² @ 2 mm6.5 m² @ 3 mm

3.6 m² @ 3 mm

TremcoCP620

Protection Course

1.0 m x 20 m roll 20 m²

TremcoCP650*

Drainage & Protection

Board1.1 m x 50 m roll 55 m²

Balco

ny & W

alkway C

oating

s

TremcoCP350

ElastomericBase Coat

18.9 litres 26 m²

TremcoCP951

Wearing Top Coat

Pt A - 14.2 litresPt B - 3.2 litres

54 m²

Tremco CP590

Colourpaste for CP951

400 g2 pots per 17.4 litres of CP951

TremcoCP171

PrimerConcrete

19.0 litres 135 m²

TremcoCP191

Reactivator to ExistingPU

Coatings18.9 litres 235 m²

Tremco CP508

Medium-FineNatural Quartz

Sand25.0 kg 25 m²

Tremco CP310

Balcony Coating 12.5 litres 8.3 m²

Tremco CS175

Dry Surface Primer

Pt A ) 7.5 kgPt B )

75 m²

Tremco ES200

Wet Surface Primer

Pt 1 ) 6.0 kgPt 2 )

12.5 to 15 m²

CS681Decorative Flake

Blend20.0 kg as required

* See data sheet for availablity of different grade options. Coverage rates indicated should not be exceeded as this may affect product performance.

Priming Guide

The table below indicates the appropriate primer for each of our waterproofing systems.

With the variability in substrates it is best practice to carry out an on-site adhesion test. Technical Service support is available to assist with this.

TremcoCR320

TremcoCR360

TremcoCP250

TremcoCP350

Bitumen Roof Felt ü ü û û

Asphalt ü ü û ûConcrete Screeds

CR100 CP150 ü CP171

Single Ply Membrane ¬ ¬ û û

Brickwork CR100 CP150 ü CP171

Glass ü ü û ûCopper CR110 ü ü CP171

Lead CR110 ü ü CP171

AluminiumGalvanised SteelZinc

CR110 ü ü CP171

Wood Panels CR100 CP150 ü CP171

Polyurethane Insulation Boards ¬ ¬ û û

ü No Primer Requiredû Not Suitable¬ Contact Tremco illbruck Technical Department

19 | | 19

Tremco illbruck LimitedCoupland Road,Hindley GreenWigan WN2 4HT UK

Tel:+44(0)1942251400Fax:+44(0)[email protected]

January 2012