pocket door hardware system - specialty supplies · 1. assemble follow strip and attach to carriage...
TRANSCRIPT
1. Assemble follow strip and attach to carriage plates with panhead machine screws.
2. Attach mounting plates (and spacers if applicable) to carriage plates with flat head machine screws.
3. Attach assembly to cabinet with 606N, 606P or system screws (purchased separately).
7
4
3
1. Attach assembly to cabinet top and rollers to cabinet sides.
Important!Use FLIPPER DOOR rollersAttach with 606N or 606P screws(purchased separately).
Max. door weight 6 kg (13.2 lbs)
2. Attach door.
Right or left-hand POCKET DOOR hardware sets can be used.
4. Attach door guides to top and bottom of cabinet with 606N or 606P screws.
5. Attach hinges to mounting plates.
5
FLIPPER DOOR rollers
6
POCKET DOOR hardware systemSelection / specification manual
POCKET DOOR installation
Vertical application
Horizontal application
Subject to technical modifications without notice. © 2004
270E0005
All dimensions in millimeters (Inch equivalents)
Information is also available on these other Blum products:
• BLUMOTION soft closing systems
• Concealed hinges: CLIP top, CLIP, MODUL and COMPACT
• Machine and assembly aids
• METABOX drawer system
• ORGA-LINE drawer dividing system
• STANDARD drawer runners
• SOLO concealed runners
• TANDEM concealed runners
• TANDEMBOX drawer system
7007.05.04 © 2004 Printed in USA
Blum, Inc.7733 Old Plank Rd.Stanley, NC 28164toll free 800-438-6788local 704-827-1345fax 704-827-0799internet www.blum.us
Perfecting motion
Mounting distance chart
• “Open and slide-in” door operation• Epoxy coated runners with permanently lubricated synthetic rollers • Right and left hand sets with open channel design keeps dust from accum- ulating for smooth running action• Adjustable two-piece steel follow strip • CLIP door hinges and mounting plates that offer 3-way independent adjustment
• Vertical or horizontal installation possible• Inset configurations for doors up to 19mm (3/4") thick with included hardware, or for doors up to 22mm (7/8") thick with optional hinges and mounting plates• Runners, follow strips and plastic parts are brown. • Hinges, mounting plates and screws are nickel plated
Part No. (LH)
270E3000.05270E3500.05270E4000.05270E4500.05270E5000.05270E5500.05 270E6000.05
Runner length
300 (11-13/16")350 (13-3/4")400 (15-3/4")450 (17-11/16")500 (19-11/16")550 (21-5/8")600 (23-5/8")
The components listed below are included in each POCKET DOOR set
2 pcs. cabinet profiles (top and bottom) with pre-mounted guide roller and carriage plate. Left or right hand, brown epoxy coated
2 pcs. 71T9680 CLIP thick door hinges
2 pcs. 173H9100 CLIP mounting plates4 pcs. 642.1150, flathead mounting plate screw (M5x11.5), nickel6 pcs. 647.0700, panhead follow strip screw (M5x7), nickel2 pcs. 270E0009 plastic door guide, brown2 pcs. 270E5050 adjustable follow strip, brown
Removal Height adjustment Side adjustment Depth adjustmentAssembly
+3, -2mm
Maximum door weight for all applications using two runners is 6 kg (13.2 lbs.)
Inset applications: Runner length+
Door thickness (T)= Min. int. cab. depth
For applications where the interior height is too small for the two piece follow strip to fit,a wood follow strip must be substituted.The smallest interior height that can beaccommodated is 244 (9-5/8").
For tall or heavy doors, additional hinges and runners may be required. When adding extra runners, a wood follow strip must be used in place of the furnished two piece adjustable strip.
Wood follow strip should be made of 2-1/4" wide x 1/2" thick hardwood and should be 12 (1/2") shorter than interior height. Attach all carriage plates to follow strip with (4) #8 x 1/2" roundhead wood screws per plate.
Component list
Hinge assembly and adjustment
Runner specifications
Installation dimensions Alternative wood follow strip Interior heights less than 640 Tall or heavy doors
For frame cabinets
1
234
5
67
Top view Top view Top view
Side view Side view
Inset applications
For 16 (5/8") to 22 (7/8") door thickness Hinge 71T9680 Mounting plate 173H9100 Reveal can be adjusted ± 2mm
23
Reveal can be adjusted ±2mm
Reveal Table
B Bore Distance 5R Reveal
6 85.5 4.5 3.5
72.5
For frame cabinets / thick doors For tall, short or heavy doors
Retractable door hardware
Program Specifications Applications
Part No. (RH)
270E3000.04 270E3500.04270E4000.04270E4500.04270E5000.04270E5500.04270E6000.04
300 (11-13/16")
350 (13-3/4")
400 (15-3/4")
450 (17-11/16")
500 (19-11/16")
550 (21-5/8")
600 (23-5/8")
Runnerlength
Door travel
170 (6-11/16")
220 (8-5/8")
270 (10-5/8")
320 (12-9/16")
370 (14-9/16")
420 (16-1/2")
470 (18-1/2")
Follow striplength
Mountingdistance
Min. openingheight
884 (34-13/16")
852 (33-9/16")
820 (32-5/16")
788 (31")
756 (29-3/4")
724 (28-1/2")
692 (27-1/4")
660 (26")
628 (24-3/4")
768 (30-1/4")
736 (29")
704 (27-11/16")
672 (26-7/16")
640 (25-3/16")
608 (23-15/16")
576 (22-11/16")
544 (21-7/16")
512 (20-3/16")
896 (35-1/4")
864 (34")
832 (32-3/4")
800 (31-1/2")
768 (30-1/4")
736 (29")
704 (27-11/16")
672 (26-7/16")
640 (25-3/16")
1 1.5 2 3 4 5 5.5 6 7 8 9 9.5 10 11 12
1/32 1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32
Millimeter to inch equivalents
13 13.5 14 15 16 17 17.5 18 19 20 20.5 21 22 23 24 24.5 25.4
1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/32 31/32 1
± 2mm± 2mm
2
1
6
34
75
37 (1-7/16")
Mou
ntin
g di
stan
ce (s
ee c
hart
)
Door travel
B
Runner length43 (
1-11
/16"
)
Side view
Top view
T
130 (5-1/8")
T
64 (2
-1/2
") m
in.
64 (2
-1/2
") m
in.
Doo
r hei
ght m
ax. =
ope
ning
- 4
(3/1
6")
12 (1
/2")
BR
22 m
ax. (
7/8"
)
12 (1/2")
37 (1
-7/1
6")
+ do
or
T
9
37128128128 96
32
Runner length
32
300
350
400
450
500
550
600
#8 x 1/2"roundhead screws
1/2" x 2-1/4"hardwood
carriageplate
Custom woodfollow strip
244
(9-5
/8")
to 6
40 (2
5-3/
16")
840
(33"
) or g
reat
er
Custom woodfollow strip
22 (7
/8")
max
.
R
37 (1
-7/1
6")
+ do
or
B
23
13 (1/2")
Use Inset application table on previous page
Wood follow strip
Hinge 71T9680Mtg. plate 173H9100
Hinge 71T9780Mtg. plate 173H9130(Both purchased separately)
Block out behindframe as required
Follow strip7
8 (5/16")
3 (1/8")11 (7/16")
Varia
ble
depe
ndin
g on
doo
r thi
ckne
ss
31 (1
-3/1
6") m
ax.
RB
37 (1
-7/1
6")
+ do
or
7
23
22 (7
/8")
max
.
Block out behindframe as required
Use Inset application table on previous page
Follow strip
Hinge 71T9680Mtg. plate 173H9100
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
1. Assemble follow strip and attach to carriage plates with panhead machine screws.
2. Attach mounting plates (and spacers if applicable) to carriage plates with flat head machine screws.
3. Attach assembly to cabinet with 606N, 606P or system screws (purchased separately).
7
4
3
1. Attach assembly to cabinet top and rollers to cabinet sides.
Important!Use FLIPPER DOOR rollersAttach with 606N or 606P screws(purchased separately).
Max. door weight 6 kg (13.2 lbs)
2. Attach door.
Right or left-hand POCKET DOOR hardware sets can be used.
4. Attach door guides to top and bottom of cabinet with 606N or 606P screws.
5. Attach hinges to mounting plates.
5
FLIPPER DOOR rollers
6
POCKET DOOR hardware systemSelection / specification manual
POCKET DOOR installation
Vertical application
Horizontal application
Subject to technical modifications without notice. © 2004
270E0005
All dimensions in millimeters (Inch equivalents)
Information is also available on these other Blum products:
• BLUMOTION soft closing systems
• Concealed hinges: CLIP top, CLIP, MODUL and COMPACT
• Machine and assembly aids
• METABOX drawer system
• ORGA-LINE drawer dividing system
• STANDARD drawer runners
• SOLO concealed runners
• TANDEM concealed runners
• TANDEMBOX drawer system
7007.05.04 © 2004 Printed in USA
Blum, Inc.7733 Old Plank Rd.Stanley, NC 28164toll free 800-438-6788local 704-827-1345fax 704-827-0799internet www.blum.us
Perfecting motion
Mounting distance chart
• “Open and slide-in” door operation• Epoxy coated runners with permanently lubricated synthetic rollers • Right and left hand sets with open channel design keeps dust from accum- ulating for smooth running action• Adjustable two-piece steel follow strip • CLIP door hinges and mounting plates that offer 3-way independent adjustment
• Vertical or horizontal installation possible• Inset configurations for doors up to 19mm (3/4") thick with included hardware, or for doors up to 22mm (7/8") thick with optional hinges and mounting plates• Runners, follow strips and plastic parts are brown. • Hinges, mounting plates and screws are nickel plated
Part No. (LH)
270E3000.05270E3500.05270E4000.05270E4500.05270E5000.05270E5500.05 270E6000.05
Runner length
300 (11-13/16")350 (13-3/4")400 (15-3/4")450 (17-11/16")500 (19-11/16")550 (21-5/8")600 (23-5/8")
The components listed below are included in each POCKET DOOR set
2 pcs. cabinet profiles (top and bottom) with pre-mounted guide roller and carriage plate. Left or right hand, brown epoxy coated
2 pcs. 71T9680 CLIP thick door hinges
2 pcs. 173H9100 CLIP mounting plates4 pcs. 642.1150, flathead mounting plate screw (M5x11.5), nickel6 pcs. 647.0700, panhead follow strip screw (M5x7), nickel2 pcs. 270E0009 plastic door guide, brown2 pcs. 270E5050 adjustable follow strip, brown
Removal Height adjustment Side adjustment Depth adjustmentAssembly
+3, -2mm
Maximum door weight for all applications using two runners is 6 kg (13.2 lbs.)
Inset applications: Runner length+
Door thickness (T)= Min. int. cab. depth
For applications where the interior height is too small for the two piece follow strip to fit,a wood follow strip must be substituted.The smallest interior height that can beaccommodated is 244 (9-5/8").
For tall or heavy doors, additional hinges and runners may be required. When adding extra runners, a wood follow strip must be used in place of the furnished two piece adjustable strip.
Wood follow strip should be made of 2-1/4" wide x 1/2" thick hardwood and should be 12 (1/2") shorter than interior height. Attach all carriage plates to follow strip with (4) #8 x 1/2" roundhead wood screws per plate.
Component list
Hinge assembly and adjustment
Runner specifications
Installation dimensions Alternative wood follow strip Interior heights less than 640 Tall or heavy doors
For frame cabinets
1
234
5
67
Top view Top view Top view
Side view Side view
Inset applications
For 16 (5/8") to 22 (7/8") door thickness Hinge 71T9680 Mounting plate 173H9100 Reveal can be adjusted ± 2mm
23
Reveal can be adjusted ±2mm
Reveal Table
B Bore Distance 5R Reveal
6 85.5 4.5 3.5
72.5
For frame cabinets / thick doors For tall, short or heavy doors
Retractable door hardware
Program Specifications Applications
Part No. (RH)
270E3000.04 270E3500.04270E4000.04270E4500.04270E5000.04270E5500.04270E6000.04
300 (11-13/16")
350 (13-3/4")
400 (15-3/4")
450 (17-11/16")
500 (19-11/16")
550 (21-5/8")
600 (23-5/8")
Runnerlength
Door travel
170 (6-11/16")
220 (8-5/8")
270 (10-5/8")
320 (12-9/16")
370 (14-9/16")
420 (16-1/2")
470 (18-1/2")
Follow striplength
Mountingdistance
Min. openingheight
884 (34-13/16")
852 (33-9/16")
820 (32-5/16")
788 (31")
756 (29-3/4")
724 (28-1/2")
692 (27-1/4")
660 (26")
628 (24-3/4")
768 (30-1/4")
736 (29")
704 (27-11/16")
672 (26-7/16")
640 (25-3/16")
608 (23-15/16")
576 (22-11/16")
544 (21-7/16")
512 (20-3/16")
896 (35-1/4")
864 (34")
832 (32-3/4")
800 (31-1/2")
768 (30-1/4")
736 (29")
704 (27-11/16")
672 (26-7/16")
640 (25-3/16")
1 1.5 2 3 4 5 5.5 6 7 8 9 9.5 10 11 12
1/32 1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32
Millimeter to inch equivalents
13 13.5 14 15 16 17 17.5 18 19 20 20.5 21 22 23 24 24.5 25.4
1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/32 31/32 1
± 2mm± 2mm
2
1
6
34
75
37 (1-7/16")
Mou
ntin
g di
stan
ce (s
ee c
hart
)
Door travel
B
Runner length43 (
1-11
/16"
)
Side view
Top view
T
130 (5-1/8")
T
64 (2
-1/2
") m
in.
64 (2
-1/2
") m
in.
Doo
r hei
ght m
ax. =
ope
ning
- 4
(3/1
6")
12 (1
/2")
BR
22 m
ax. (
7/8"
)
12 (1/2")
37 (1
-7/1
6")
+ do
or
T
9
37128128128 96
32
Runner length
32
300
350
400
450
500
550
600
#8 x 1/2"roundhead screws
1/2" x 2-1/4"hardwood
carriageplate
Custom woodfollow strip
244
(9-5
/8")
to 6
40 (2
5-3/
16")
840
(33"
) or g
reat
er
Custom woodfollow strip
22 (7
/8")
max
.
R
37 (1
-7/1
6")
+ do
or
B
23
13 (1/2")
Use Inset application table on previous page
Wood follow strip
Hinge 71T9680Mtg. plate 173H9100
Hinge 71T9780Mtg. plate 173H9130(Both purchased separately)
Block out behindframe as required
Follow strip7
8 (5/16")
3 (1/8")11 (7/16")
Varia
ble
depe
ndin
g on
doo
r thi
ckne
ss
31 (1
-3/1
6") m
ax.
RB
37 (1
-7/1
6")
+ do
or
7
23
22 (7
/8")
max
.
Block out behindframe as required
Use Inset application table on previous page
Follow strip
Hinge 71T9680Mtg. plate 173H9100
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Mounting distance chart
• “Open and slide-in” door operation• Epoxy coated runners with permanently lubricated synthetic rollers • Right and left hand sets with open channel design keeps dust from accum- ulating for smooth running action• Adjustable two-piece steel follow strip • CLIP door hinges and mounting plates that offer 3-way independent adjustment
• Vertical or horizontal installation possible• Inset configurations for doors up to 19mm (3/4") thick with included hardware, or for doors up to 22mm (7/8") thick with optional hinges and mounting plates• Runners, follow strips and plastic parts are brown. • Hinges, mounting plates and screws are nickel plated
Part No. (LH)
270E3000.05270E3500.05270E4000.05270E4500.05270E5000.05270E5500.05 270E6000.05
Runner length
300 (11-13/16")350 (13-3/4")400 (15-3/4")450 (17-11/16")500 (19-11/16")550 (21-5/8")600 (23-5/8")
The components listed below are included in each POCKET DOOR set
2 pcs. cabinet profiles (top and bottom) with pre-mounted guide roller and carriage plate. Left or right hand, brown epoxy coated
2 pcs. 71T9680 CLIP thick door hinges
2 pcs. 173H9100 CLIP mounting plates4 pcs. 642.1150, flathead mounting plate screw (M5x11.5), nickel6 pcs. 647.0700, panhead follow strip screw (M5x7), nickel2 pcs. 270E0009 plastic door guide, brown2 pcs. 270E5050 adjustable follow strip, brown
Removal Height adjustment Side adjustment Depth adjustmentAssembly
+3, -2mm
Maximum door weight for all applications using two runners is 6 kg (13.2 lbs.)
Inset applications: Runner length+
Door thickness (T)= Min. int. cab. depth
For applications where the interior height is too small for the two piece follow strip to fit,a wood follow strip must be substituted.The smallest interior height that can beaccommodated is 244 (9-5/8").
For tall or heavy doors, additional hinges and runners may be required. When adding extra runners, a wood follow strip must be used in place of the furnished two piece adjustable strip.
Wood follow strip should be made of 2-1/4" wide x 1/2" thick hardwood and should be 12 (1/2") shorter than interior height. Attach all carriage plates to follow strip with (4) #8 x 1/2" roundhead wood screws per plate.
Component list
Hinge assembly and adjustment
Runner specifications
Installation dimensions Alternative wood follow strip Interior heights less than 640 Tall or heavy doors
For frame cabinets
1
234
5
67
Top view Top view Top view
Side view Side view
Inset applications
For 16 (5/8") to 22 (7/8") door thickness Hinge 71T9680 Mounting plate 173H9100 Reveal can be adjusted ± 2mm
23
Reveal can be adjusted ±2mm
Reveal Table
B Bore Distance 5R Reveal
6 85.5 4.5 3.5
72.5
For frame cabinets / thick doors For tall, short or heavy doors
Retractable door hardware
Program Specifications Applications
Part No. (RH)
270E3000.04 270E3500.04270E4000.04270E4500.04270E5000.04270E5500.04270E6000.04
300 (11-13/16")
350 (13-3/4")
400 (15-3/4")
450 (17-11/16")
500 (19-11/16")
550 (21-5/8")
600 (23-5/8")
Runnerlength
Door travel
170 (6-11/16")
220 (8-5/8")
270 (10-5/8")
320 (12-9/16")
370 (14-9/16")
420 (16-1/2")
470 (18-1/2")
Follow striplength
Mountingdistance
Min. openingheight
884 (34-13/16")
852 (33-9/16")
820 (32-5/16")
788 (31")
756 (29-3/4")
724 (28-1/2")
692 (27-1/4")
660 (26")
628 (24-3/4")
768 (30-1/4")
736 (29")
704 (27-11/16")
672 (26-7/16")
640 (25-3/16")
608 (23-15/16")
576 (22-11/16")
544 (21-7/16")
512 (20-3/16")
896 (35-1/4")
864 (34")
832 (32-3/4")
800 (31-1/2")
768 (30-1/4")
736 (29")
704 (27-11/16")
672 (26-7/16")
640 (25-3/16")
1 1.5 2 3 4 5 5.5 6 7 8 9 9.5 10 11 12
1/32 1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32
Millimeter to inch equivalents
13 13.5 14 15 16 17 17.5 18 19 20 20.5 21 22 23 24 24.5 25.4
1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 15/32 31/32 1
± 2mm± 2mm
2
1
6
34
75
37 (1-7/16")
Mou
ntin
g di
stan
ce (s
ee c
hart
)
Door travel
B
Runner length43 (
1-11
/16"
)
Side view
Top view
T
130 (5-1/8")
T
64 (2
-1/2
") m
in.
64 (2
-1/2
") m
in.
Doo
r hei
ght m
ax. =
ope
ning
- 4
(3/1
6")
12 (1
/2")
BR
22 m
ax. (
7/8"
)
12 (1/2")
37 (1
-7/1
6")
+ do
or
T
9
37128128128 96
32
Runner length
32
300
350
400
450
500
550
600
#8 x 1/2"roundhead screws
1/2" x 2-1/4"hardwood
carriageplate
Custom woodfollow strip
244
(9-5
/8")
to 6
40 (2
5-3/
16")
840
(33"
) or g
reat
er
Custom woodfollow strip
22 (7
/8")
max
.
R
37 (1
-7/1
6")
+ do
or
B
23
13 (1/2")
Use Inset application table on previous page
Wood follow strip
Hinge 71T9680Mtg. plate 173H9100
Hinge 71T9780Mtg. plate 173H9130(Both purchased separately)
Block out behindframe as required
Follow strip7
8 (5/16")
3 (1/8")11 (7/16")
Varia
ble
depe
ndin
g on
doo
r thi
ckne
ss
31 (1
-3/1
6") m
ax.
RB
37 (1
-7/1
6")
+ do
or
7
23
22 (7
/8")
max
.
Block out behindframe as required
Use Inset application table on previous page
Follow strip
Hinge 71T9680Mtg. plate 173H9100
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
Subject to technical modifications without notice. © 2004All dimensions in millimeters (Inch equivalents)
1. Assemble follow strip and attach to carriage plates with panhead machine screws.
2. Attach mounting plates (and spacers if applicable) to carriage plates with flat head machine screws.
3. Attach assembly to cabinet with 606N, 606P or system screws (purchased separately).
7
4
3
1. Attach assembly to cabinet top and rollers to cabinet sides.
Important!Use FLIPPER DOOR rollersAttach with 606N or 606P screws(purchased separately).
Max. door weight 6 kg (13.2 lbs)
2. Attach door.
Right or left-hand POCKET DOOR hardware sets can be used.
4. Attach door guides to top and bottom of cabinet with 606N or 606P screws.
5. Attach hinges to mounting plates.
5
FLIPPER DOOR rollers
6
POCKET DOOR hardware systemSelection / specification manual
POCKET DOOR installation
Vertical application
Horizontal application
Subject to technical modifications without notice. © 2004
270E0005
All dimensions in millimeters (Inch equivalents)
Information is also available on these other Blum products:
• BLUMOTION soft closing systems
• Concealed hinges: CLIP top, CLIP, MODUL and COMPACT
• Machine and assembly aids
• METABOX drawer system
• ORGA-LINE drawer dividing system
• STANDARD drawer runners
• SOLO concealed runners
• TANDEM concealed runners
• TANDEMBOX drawer system
7007.05.04 © 2004 Printed in USA
Blum, Inc.7733 Old Plank Rd.Stanley, NC 28164toll free 800-438-6788local 704-827-1345fax 704-827-0799internet www.blum.us
Perfecting motion