pneumatic cylinders - v-king

Pneumatic Cylinders

aerospaceclimate control electromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shielding

Series P1AAccording to ISO 6432Catalogue PDE2564TCUK-ul. August 2009

�

P1A Cylinders

08.04

www.parker.com/euro_pneumatic

SALE CONDITIONSThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions stated in Parker’s standard terms and conditions of sale (copy available upon request).

WARNING

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY ANDPROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

NoteAlltechnicaldatainthiscataloguearetypicaldataonly.Airqualityisessentialformaximumcylinderservicelife(seeISO8573).

ImportantBeforeattemptinganyexternalorinternalworkonthecylinderoranyconnectedcomponents,makesurethecylinderisventedanddisconnecttheairsupplyinordertoensureisolationoftheairsupply.

Features Air Hydraulic Electro cylinder cylinder mechanical actuators

Overload safe *** *** *

Easy to limit force *** *** *

Easy to vary speed *** *** *

Speed *** ** **

Reliability *** *** ***

Robustness *** *** *

Installation cost *** * **

Ease of service *** ** *

Safety in damp environments *** *** *

Safety in explosive atmospheres *** *** *

Safety risk with electrical installations *** *** *

Risk of oil leak *** * ***

Clean, hygienic *** ** *

Standardised measurements *** *** *

Service life *** *** *

Hydraulic system required *** * ***

Weight ** ** **

Purchase price *** ** *

Power density ** *** *

Noise level during operation ** *** **

High force for size ** *** *

Positioning possibilities * *** ***

Total energy consumption * ** ***

Service interval * ** ***

Compressor capacity required * *** ***

* = good, **=average, ***=excellent

3

P1A Cylinders

08.04


Contents PageISOcylinderseriesP1A...............................................................................4-5Cylinderforces...............................................................................................6Maindata........................................................................................................7Workingmedium,airquality..........................................................................7Materialspecification.....................................................................................8Cushioningdiagram.......................................................................................8Dimensions.....................................................................................................9Guideforselectingsuitabletubing.........................................................10-11Orderkey......................................................................................................1�Strokelength................................................................................................1�Ordercodessingle-actingP1A....................................................................13Ordercodesdouble-actingP1A.............................................................14-15P1Awithrodguidancemodules.............................................................16-18Mountings................................................................................................19-��Sensors....................................................................................................�3-�6Connectingcableswithoneconnector........................................................�7Maleconnectorsforconnectingcables.......................................................�7Readytouseconnectingcableswithconnectorsateachend...................�7ConnectionblockValvetronic110................................................................�8

4

P1A Cylinders

08.04


Stainless steel piston rod.

Low-friction piston rod seal.

Magnet for proximity sensing.

Aluminium anodised end caps.

Low-friction piston.

Smooth stainless steel cylinder tube.

Cylinder design conforms to ISO 6432 for simple design and integration with equipment. Fully interchangeable with all ISO standard mini-cylinders.

Cylinders are supplied complete with neck mounting and piston rod nut.

Double and single-acting versionsTheP1Arangeofcylindersisintendedforuseinawiderangeofapplications.Thecylindersareparticularlysuitableforlighterdutiesinthepackaging,foodandtextileindustries.Hygienicdesign,theuseofcorrosion-resistantmaterialsandinitiallubricationwithourfood-gradegreasemakesthecylinderssuitableforfoodindustryapplications.

Carefuldesignandhighqualitymanufacturethroughoutensurelongservicelifeandoptimumeconomy.

MountingdimensionsfullyinaccordancewithISO643�andCETOPRP5�Pgreatlysimplifiesinstallationandworld-wideinterchangeability.

Thecylindersareavailableinboresof10,1�,16,�0and�5mm,withstrokelengthsfrom10mmto3�0mm.

Single-actingcylinderswithspringreturnintheretractdirectionareavailableinstrokelengthsupto80mm.

Single-actingcylinderswithspringreturnintheadvancedirectionareavailablein16mm,�0mmand�5mmboresizesandwithstrokelengthsupto80mm.

Double-acting cushioned cylindersAdjustablepneumaticcushioningpermitsgreaterloadsandhigheroperatingspeeds,makingthecylinderssuitableformoredemandingduties.

Thesecylindersareavailableinboresof16,�0and�5mm,withstrokelengthsfrom�0mmto500mm.

OptionsInadditiontoawiderangeofstandardcylinders,MiniISOcylindersareavailableinseveralstandardvariants,suchasnon-standardstrokelength,extendedpistonrods,doublepistonrods,hightemperatureversionsetc.Inaddition,acompleterangeofsensorsandmountingsareavailable.

5

P1A Cylinders

08.04


Effective cushioningTheMiniISOrangeisavailablewithfixedendcushioningorwithadjustablepneumaticcushioning,controlledbysimplebleedscrewsforfineadjustment.Theadjustablecushionedcylinderscanbeoperatedwithhighermassloadsandathigherspeedsthanthosewithfixedendcushioning,reducingoverallcycletimes.

Smooth external designTherearenorecessesorpocketsintheendcoversthatcouldtrapdirtorliquid,makingcleaningsimpleandeffective.

Corrosion-resistantEventhebasicversionsofthecylindershavegoodcorrosionresistancethroughappropriatechoiceofmaterialsandsurfacetreatment,allowingthemtobeusedindemandingenvironments.

Stainless steel versionsTheMiniISOrangeisalsoavailableinanall-stainlessversionwithpistonrod,barrelandendcoversofstainlesssteelforuseinparticularlysevereenvironments.SeeseparatebrochureforcylinderseriesP1S.

Proximity sensingAcompleterangeofsensorsforproximitysensingisavailableasaccessories:bothreedswichandHalleffectsensorsareavailable.Theyaresuppliedwitheitherflyingleadorcableplugconnector.

Complete mounting programmeAcompleteISOcompatiblemountingprogrammewithsurface-treated/stainlesssteelpistonrodandcylindermountingsforbothpivotedandfixedoperationareavailable.

VariantsInadditiontothebasicversions,anumberofstandardvariantsofParkerPnematicscylindersareavailabletomeetalldemandsonfunctionandenvironmentaladaptation:

Non-standardstrokelengthsExtendedpistonrodsThroughpistonrodsSingleactingcylinderwithspringreturn(intheretractdirection).Singleactingcylinderwithspringreturnintheadvancedirection(pistonrodinextendedposition)Externalguide,forcontrolledguidanceofthepistonrodHigh-temperaturecylinderversionsforuseinambienttemperaturesrangingfrom-10°Cto+150°Cforbores1�,16,�0and�5mmCylinderswithoutersealingsinfluorocarbonrubberFPMStainlesssteelcylinders,seebrochureforseriesP1S

Double-acting,cushionedstroke

Double-acting,adjustablecushioning

Double-acting,throughpistonrod

Single-acting,springreturn

Single-acting,spring-extended

Double-acting,externalguidedevice

6

P1A Cylinders

08.04


Cyl. bore/ Stroke Pistonarea Max theoretical force in N (bar) pist. rod mm cm 2 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0

10/4 + 0,8 8 16 �4 31 39 47 55 63 71 79 - 0,7 7 13 �0 �6 33 40 46 53 59 66

12/6 + 1,1 11 �3 34 45 57 68 79 90 10� 113 - 0,8 8 17 �5 34 4� 51 59 68 76 85

16/6 + �,0 �0 40 60 80 100 120 141 161 181 �01 - 1,7 17 35 5� 69 86 104 1�1 138 156 173

20/8 + 3,1 31 63 94 1�6 157 188 ��0 �51 �83 314 - �,6 �6 53 79 106 13� 158 185 �11 �38 �64

25/10 + 4,9 49 98 147 196 �45 295 344 393 44� 491 - 4,1 41 8� 1�4 165 �06 247 �89 330 371 41�

Note!Selectatheoreticalforce50-100%largerthantheforcerequired

+ =Outwardstroke- = Returnstroke

Cylinder forces, double acting variants

Cylinder forces single acting variantsIndicatedcylinderforcesaretheoreticalandshouldbereducedaccordingtotheworkingconditions.

Ordercode Theoreticalpistonforce at6bar Springretraction Nmax Nmin Nmax Nmin

Single acting, spring return

P1A-S010SS-0010 38 36 10 8,5P1A-S010SS-0015 38 36 10 7,8P1A-S010SS-00�5 39 36 10 6,6P1A-S010SS-0040 38 34 13 9P1A-S010SS-0050 39 34 13 8P1A-S010SS-0080 39 34 1� 7

P1A-S01�SS-0010 53 51 16 14,4P1A-S01�SS-0015 53 51 16 13,6P1A-S01�SS-00�5 55 51 16 1�P1A-S01�SS-0040 5� 48 19 13,4P1A-S01�SS-0050 53 48 19 1�P1A-S01�SS-0080 55 48 �1,4 1�

P1A-S016SS-0010 10� 99 ��,3 �0,�P1A-S016SS-0015 103 99 ��,3 19P1A-S016SS-00�5 105 99 ��,3 17P1A-S016SS-0040 106 95 ��,3 14P1A-S016SS-0050 108 95 ��,3 1�P1A-S016SS-0080 107 95 ��,5 1�

P1A-S0�0SS-0010 163 161 30 �8P1A-S0�0SS-0015 164 161 30 �7P1A-S0�0SS-00�5 167 161 30 �5P1A-S0�0SS-0040 166 159 30 ��P1A-S0�0SS-0050 168 159 30 �0P1A-S0�0SS-0080 170 161 �9,4 18

P1A-S0�5SS-0010 �56 �53 44,3 41,4P1A-S0�5SS-0015 �58 �53 44,3 40P1A-S0�5SS-00�5 �6� �53 44,3 37P1A-S0�5SS-0040 �61 �50 44,3 3�P1A-S0�5SS-0050 �64 �50 44,3 30P1A-S0�5SS-0080 �64 �51 44,4 30

Ordercode Theoreticalpistonforce at6bar Springretraction Nmax Nmin Nmax Nmin

Single acting, spring-extended

P1A-S016TS-0010 85 84 ��,3 �0,�P1A-S016TS-0015 86 84 ��,3 19P1A-S016TS-00�5 88 84 ��,3 17P1A-S016TS-0040 90 84 ��,3 14P1A-S016TS-0050 91 84 ��,3 1�

P1A-S0�0TS-0010 13� 130 30 �8P1A-S0�0TS-0015 133 130 30 �7P1A-S0�0TS-00�5 135 130 30 �5P1A-S0�0TS-0040 138 130 30 ��P1A-S0�0TS-0050 140 130 30 �0P1A-S0�0TS-0080 139 108 31 17

P1A-S0�5TS-0010 �05 �03 38,5 36P1A-S0�5TS-0015 �07 �03 38,5 34,7P1A-S0�5TS-00�5 �10 �03 38,5 3�P1A-S0�5TS-0040 �14 �03 38,5 �8,5P1A-S0�5TS-0050 �17 �03 38,5 �6P1A-S0�5TS-0080 ��3 �06 36 �1

7

P1A Cylinders

08.04


Working medium, air quality Workingmedium Dry,filteredcompressedair toISO8573-1class3.4.3.

Recommended air quality for cylinders

Forbestpossibleservicelifeandtrouble-freeoperation,ISO8573-1qualityclass3.4.3shouldbeused.Thismeans5µmfilter(standardfilter)dewpoint+3ºCforindooroperation(alowerdewpointshouldbeselectedforoutdooroperation)andoilconcentration1.0mgoil/m3,whichiswhatastandardcompressorwithastandardfiltergives.

ISO 8573-1 quality classes

Quality Pollution Water Oil class particle max con- max. press. max con- size centration dew point centration (µm) (mg/m³) (°C) (mg/m³)

1 0,1 0,1 -70 0,01 2 1 1 -40 0,1 3 5 5 -�0 1,0 4 15 8 +3 5,0 5 40 10 +7 �5 6 - - +10 -

Additional dataWorkingpressure max 10barWorkingtemperature max +80°C min –�0°C

High-temperatureversion max+150°C(Ø1�,16,�0and�5mm)min –10 °C

Prelubricated,furtherlubricationisnotnormallynecessary.Ifadditionallubricationisintroduceditmustbecontinued.

Main dataCylinder Cylinder Pistonrod Totalmass Air Conn.designation bore area bore area thread at0mm addition consump- thread stroke per10 tion mmstroke mm cm� mm cm� kg kg litres

Double acting, cushioned stroke

P1A-S010D 10 0,78 4 0,13 M4 0,04 0,003 0,01001) M5P1A-S01�D 1� 1,13 6 0,�8 M6 0,07 0,004 0,01391) M5P1A-S016D 16 �,01 6 0,�8 M6 0,09 0,005 0,0�6�1) M5P1A-S0�0D �0 3,14 8 0,50 M8 0,18 0,007 0,04051) G1/8P1A-S0�5D �5 4,91 10 0,78 M10x1,�5 0,�5 0,011 0,06331) G1/8

Double acting, adjustable cushioning

P1A-S016M 16 �,01 6 0,�8 M6 0,09 0,005 0,0�6�1) M5P1A-S0�0M �0 3,14 8 0,50 M8 0,18 0,007 0,04051) G1/8P1A-S0�5M �5 4,91 10 0,78 M10x1,�5 0,�5 0,011 0,06331) G1/8

Single acting, spring return

P1A-S010SS 10 0,78 4 0,13 M4 0,04 0,003 0,00551) M5P1A-S01�SS 1� 1,13 6 0,�8 M6 0,08 0,004 0,00791) M5P1A-S016SS 16 �,01 6 0,�8 M6 0,10 0,005 0,01411) M5P1A-S0�0SS �0 3,14 8 0,50 M8 0,18 0,007 0,0��01) G1/8P1A-S0�5SS �5 4,91 10 0,78 M10x1,�5 0,�6 0,011 0,03441) G1/8

Single acting, spring-extended

P1A-S016TS 16 �,01 6 0,�8 M6 0,10 0,005 0,01411) M5P1A-S0�0TS �0 3,14 8 0,50 M8 0,18 0,007 0,0��01) G1/8P1A-S0�5TS �5 4,91 10 0,78 M10x1,�5 0,�6 0,011 0,03441) G1/8

1)Freeairconsumptionper10mmstrokelengthforadoublestrokeat6bar

8

P1A Cylinders

08.04


Cushioning diagramUsethediagrambelowtodeterminethenecessarysizeofcylindertoprovidetherequisitecushioningperformance.Themaximumcushioningperformance,asindicatedinthediagram,isbasedonthefollowingassumptions:

-Lowload,i.e.lowpressuredropacrossthepiston-Steady-statepistonspeed-Correctlyadjustedcushioningscrew

Theloadisthesumoftheinternalandexternalfriction,togetherwithanygravityforces.Athighrelativeloadingitisrecommendedthat,foragivenspeed,theloadshouldbereducedbyafactorof�.5,orthat,foragivenmass,thespeedshouldbereducedbyafactorof1.5.Thesefactorsapplyinrelationtothemaximumperformanceasshowninthediagram.

Material specificationPistonrod Stainlesssteel,DINX10CrNiS189Pistonrodseal Nitrilerubber,NBRPistonrodbearing MultilayerPTFE/steelEndcovers AnodizedaluminiumO-ring,internal Nitrilerubber,NBRCylinderbarrel Stainlesssteel,DINX5CrNi1810Piston,complete Nitrilerubber,NBR/steelMagnetholder ThermoplasticelastomerMagnet Plastic-coatedmagneticmaterialReturnspring Surface-treatedsteelCushioningscrew Stainlesssteel,DINX10CrNiS189

Variants Mini ISO:Low-temperature version, type L:

Pistonrodseal Nitrilerubber,NBRPistoncomplete Nitrilerubber,NBR/steel

High-temperature version, type F:

Pistonrodseal Fluorocarbonrubber,FPMPistoncomplete HNBR/steel

Cylinders with outer sealings in fluorcarbon, type V:

Pistonrodseal/Scraperring Fluorocarbonrubber,FPM

Sparepart=newcylinder

0,3 0,5 0,8 1 1,5 2 3 4 5 8 10 15 20 300,2

0,3

0,4

0,5

0,8

1,0

1,5

2,0

2,53,0

Ø25

Ø20

Ø16

Adjustablepneumaticend-cushioningSpeed[m/s]

Mass[kg]

0,1

0,2

0,3

0,5

0,81,01,2

1,62,0

0,1 0,2 0,3 0,5 0,8 1,0 2 3 5 8 10 15 20

Ø10

Ø12

Ø16

Ø20

Ø25

30

Fixedend-cushioningSpeed[m/s]

Mass[kg]

9

P1A Cylinders

08.04


AM

ZJ

XC

L

BF

ØB

E

ØC

D

AF

WHPSW

ØK

K

ØB

E

EW

C

H

EEAF

ØK

K

ØB

E

DimensionsDouble and single acting cylinders

Through piston rodSingleActingtypeS

WH + stroke

SingleActingtypeT

Cylinderbore AM0/-� BE AF BF C CDH9EE EW H KK L SW WH±1,�mm mm mm mm mm mm mm mm mm mm mm

10 1� M1�x1,�5 1� 10 13,0 4 M5 8 13,0 M4 6 – 161� 16 M16x1,5 18 13 17,8 6 M5 1� 17,8 M6 9 5 ��

161) 16 M16x1,5 18 13 17,8 6 M5 1� 17,8 M6 9 5 ��16�) 16 M16x1,5 18 13 �3,8 6 M5 1� �3,8 M6 9 5 ��

�0 �0 M��x1,5 �0 14 �3,8 8 G1/8 16 �3,8 M8 1� 7 �4�5 �� M��x1,5 �� 14 �6,8 8 G1/8 16 �6,8 M10x1,�5 1� 9 �81)P1A-S016DS/SS/TS�)P1A-S016MS

Double acting cylindersCylinderbore XC ZJ Pmm mm mm mm

10 64+stroke 84+stroke 46+stroke1� 75+stroke 99+stroke 48+stroke16 8�+stroke 104+stroke 53+stroke�0 95+stroke 1�5+stroke 67+stroke�5 104+stroke 13�+stroke 68+stroke

Single-acting, spring return, type SSStroke/ 10 15 �5 40 50 80 10 15 �5 40 50 80 10 15 �5 40 50 80Cylinderbore XC XC XC XC XC XC ZJ ZJ ZJ ZJ ZJ ZJ P P P P P Pmm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

10 74 79 89 1�6 136 174 94 99 109 146 156 194 56 61 71 108 118 1561� 85 90 100 13� 14� 185 109 114 1�4 156 166 �09 58 63 73 105 115 15816 9� 97 107 1�� 13� 184 114 119 1�9 144 154 �06 63 68 78 93 103 155�0 105 110 1�0 135 145 191 135 140 150 165 175 ��1 77 8� 9� 107 117 163�5 114 119 1�9 144 154 �01 14� 147 157 17� 18� ��9 78 83 93 108 118 165

Single-acting, spring-extended, type TSStroke/ 10 15 �5 40 50 80 10 15 �5 40 50 80 10 15 �5 40 50 80Cylinderbore XC3) XC3) XC3) XC3) XC3) XC3) ZJ3) ZJ3) ZJ3) ZJ3) ZJ3) ZJ3) P P P P P Pmm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm

16 107 11� 1�� 137 147 – 1�9 134 144 159 169 – 78 83 93 108 118 –�0 1�0 1�5 135 150 160 195 150 155 165 180 190 ��5 9� 97 107 1�� 13� 167�5 1�9 134 144 159 169 �05 157 16� 17� 187 197 �33 93 98 108 1�3 133 1693)Withpistonrodretracted,asshowninthedimensiondrawingLengthtolerances ±1mmStrokelengthtolerances +1,5/0mm

CAD drawings on the InternetOurhomepagewww.parker.com/euro_pneumaticincludestheAirCadDrawingLibrarywith�Dand3Ddrawingsforthemainversions.

10

P1A Cylinders

08.04


Guide for selecting suitable tubingTheselectionofthecorrectsizeoftubingisoftenbasedonexperience,withnogreatthoughttooptimizingenergyefficiencyandcylindervelocity.Thisisusuallyacceptable,butmakingaroughcalculationcanresultinworthwhileeconomicgains.

The following is the basic principle:1.Theprimarylinetotheworkingvalvecouldbeoversized

(thisdoesnotcauseanyextraairconsumptionandconsequentlydoesnotcreateanyextracostsinoperation).

�.Thetubesbetweenthevalveandthecylindershould,however,beoptimizedaccordingtotheprinciplethataninsufficientborethrottlestheflowandthuslimitsthecylinderspeed,whileanoversizedpipecreatesadeadvolumewhichincreasestheairconsumptionandfillingtime.

Thechartbelowisintendedtohelpwhenselectingthecorrectsizeoftubetousebetweenthevalveandthecylinder.

The following prerequisites apply:Thecylinder load should be about 50%ofthetheoreticalforce(=normalload).Alowerloadgivesahighervelocityandviceversa.Thetubesizeisselectedasafunctionofthecylinder bore,thedesiredcylinder velocityandthetube lengthbetweenthevalveandthecylinder.

Ifyouwanttousethecapacityofthevalvetoitsmaximum,andobtainmaximumspeed,thetubingshouldbechosensothattheyatleastcorrespondwiththeequivalentrestrictiondiameter(seedescriptionbelow),sothatthetubingdoesnotrestrictthetotalflow.Thismeansthatashorttubingmusthaveatleasttheequivalentrestrictiondiameter.Ifthetubingislonger,chooseitfromthetablebelow.Straightfittingsshouldbechosenforhighestflowrates.(Elbowandbanjofittingscauserestriction.)

1) The“equivalentthrottlingbore“isalongthrottle(forexampleatube)oraseriesofthrottles(forexample,throughavalve)convertedtoashortthrottlewhichgivesacorrespondingflowrate.Thisshouldnotbeconfusedwiththe“orifice“whichissometimesspecifiedforvalves.Thevaluefortheorificedoesnotnormallytakeaccountofthefactthatthevalvecontainsanumberofthrottles.

�) Qnisameasureofthevalveflowcapacity,withflowmeasuredinlitreperminute(l/min)at6bar(e)supplypressureand1barpressuredropacrossthevalve.

CylinderØ[mm]

Equivalentthrottlingbore1) TubeØOut./ØInt.[mm]

Lengthoftubing[m]Cylinderspeed[m/s]0,2 0,5 0,8 1,1 1,4 0 1 2 3 4 5 6 7 8 9 10

1

2

3

4

5

6

7

8

9

10

11

Ø10Ø16Ø20Ø25Ø32Ø40Ø50

Ø63

Ø80

Ø100

Ø125

Ø160

Ø200

14/11–/12

–/13

–/14

–/15

–/16

12/10

10/8

8/6

6/45/34/2,7

200

400

800

1000

1200

14001600

1800200022002400

3000

4000

2800

3200340036003800

2600

4

3

2

1

AirflowQn[Nl/min]

11

P1A Cylinders

08.04


Example 1 : Which tube diameter should be used?A50mmborecylinderistobeoperatedat0.5m/s.Thetubelengthbetweenthevalveandcylinderis�m.Inthediagramwefollowthelinefrom50mmboreto0.5m/sandgetan“equivalentthrottlingbore“ofapproximately4mm.Wecontinueouttotherightinthechartandintersectthelinefora�mtubebetweenthecurvesfor4mm(6/4tube)and6mm(8/6tube).Thismeansthata6/4tubethrottlesthevelocitysomewhat,whilean8/6tubeisalittletoolarge.Weselectthe8/6tubetoobtainfullcylindervelocity.

Example 2 : What cylinder velocity will be obtained?A80mmborecylinderwillbeused,connectedby8m1�/10tubetoaP�L-Bvalve.Whatcylindervelocitywillweget?Werefertothediagramandfollowthelinefrom8mmtubelengthuptothecurvefor1�/10tube.Fromthere,wegohorizontallytothecurvefortheØ80cylinder.Wefindthatthevelocitywillbeabout0.5m/s.

Example 3 : What is the minimum inner diameter and maximum lenght of tube?Foraapplicationa1�5mmborecylinderwillbeused.Maximumvelocityofpistonrodis0.5m/s.ThecylinderwillbecontrolledbyaP�L-Dvalve.Whatdiameteroftubecanbeusedandwhatismaximumlenghtoftube.Werefertothediagram.WestartattheleftsideofthediagramcylinderØ1�5.Wefollowthelineuntiltheintersectionwiththevelocitylineof0.5m/s.Fromherewedrawahorizontallineinthediagram.Thislineshowsusweneedanequivalentthrottlingboreofapproximately10mm.Followingthislinehorizontallywecrossafewintersections.Theseintersectionsshowsustheminimuminnerdiameter(rightsidediagram)incombinationwiththemaximumlengthoftube(bottomsidediagram).

Forexample:Intersectionone:Whenatube(14/11)willbeused,themaximumlengthoftubeis0.7meter.Intersectiontwo:Whenatube(—/13)willbeused,themaximumlengthoftubeis3.7meter.Intersectionthree:Whenatube(—/14)willbeused,themaximumlengthoftubeis6meter.

Example 4 : Determining tube size and cylinder velocity with a particular cylinder and valve?Foranapplicationusinga40mmborecylinderwithavalvewithQn=800Nl/min.Thedistancebetweenthecylinderandvalvehasbeensetto5m.Tube dimension: Whattubeboreshouldbeselectedtoobtainthemaximumcylindervelocity?Startatpipelength5m,followthelineuptotheintersectionwith800Nl/min.Selectthenextlargesttubediameter,inthiscaseØ10/8mm.Cylinder velocity:Whatmaximumcylindervelocitywillbeobtained?Followthelinefor800Nl/mintotheleftuntilitintersectswiththelinefortheØ40mmcylinder.Inthisexample,thespeedisjustabove1.1m/s.

Valve series with respective flows in Nl/minute

Valve series Qn in Nl/Min

ValvetronicSolstar 33InterfacePS1 100AdexA05 173Moduflexsize1,(�x3/�) ��0ValvetronicPVL-B5/3closedcentre,6mmpushin �90Moduflexsize1,(4/�) 3�0B43Manualandmechanical 340ValvetronicPVL-B�x�/3,6mmpushin 350ValvetronicPVL-B5/3closedcentre,G1/8 370CompactIsomaxDX0� 385ValvetronicPVL-B�x3/�G1/8 440ValvetronicPVL-B5/�,6mmpushin 450ValvetronicPVL-B5/3ventedcentre,6mmpushin 450Moduflexsize�,(�x3/�) 450FlowstarP�V-A 5�0ValvetronicPVL-B5/3ventedcentre,G1/8 540ValvetronicPVL-B5/�,G1/8 540ValvetronicPVL-C�x3/�,8mmpushin 540AdexA1� 560ValvetronicPVL-C�x3/�G1/8 570CompactIsomaxDX01 585VIKINGXtremeP�LAX 660ValvetronicPVL-C5/3closedcentre,8mmpushin 700ValvetronicPVL-C5/3ventedcentre,G1/4 700B3-Series 780ValvetronicPVL-C5/3closedcentre,G1/4 780Moduflexsize�,(4/�) 800ValvetronicPVL-C5/�,8mmpushin 840ValvetronicPVL-C5/3ventedcentre,8mmpushin 840ValvetronicPVL-C5/�,G1/4 840FlowstarP�V-B 1090ISOMAXDX1 1150B53Manualandmechanical 1160B4-Series 1170VIKINGXtremeP�LBX 1�90B5-Series,G1/4 1440AirlineIsolatorValveVE��/�3 1470ISOMAXDX� �330VIKINGXtremeP�LCX,G3/8 �460VIKINGXtremeP�LDX,G1/� �660ISOMAXDX3 4050AirlineIsolatorValveVE4�/43 55�0AirlineIsolatorValveVE8�/83 13680

1�

P1A Cylinders

08.04


Order key

P 1 A – S 0 1 6 M S – 0 0 2 5

Cylinder type / function

M Double-acting,adjustablecushioning. Ø16-�5mm.Notforsealingmaterial typeFandL

D Double-acting,non-adjustable cushioning,Ø10-Ø�5

F Double-acting,adjustablecushioning, thru-rod,Ø16-�5mm.Notforsealing materialtypeF

K Double-acting,non-adjustable cushioning,thru-rod, Ø10-Ø�5

S Single-acting,non-adjustable cushioning,springreturnforretract stroke,Ø10-�5mm

T Single-acting,non-adjustable cushioning,springreturnforadvance stroke,Ø16-�5mm

Stroke length, mm

E.g.00�5=�5mmForstandardstrokelengthandmaxlengthseetablebelow.

Sealing material

S Standard, -�0°Cto+80°C. Magneticpiston

F Hightemperature, Ø1�,16,�0and�5mm -10°Cto+150°C. Non-magneticpiston

V Externalsealsof fluorinatedrubber. -�0°Cto+80°C. Magneticpiston

Cylinder bore mm

010

012

016

020

025

Stroke length

Cylinder Cylinder Standardstrokelengthinmm Nonstandardstrokelengthdesignation bore 10 15 �0 �5* 30 40 50* 80* 100* 1�5* 160* �00* �50* 3�0* 400* 500*

Double acting with fixed end-cushioning:

P1A-S010D 10 • • • • • • • • • •P1A-S01�D 1� • • • • • • • • • • • •P1A-S016D 16 • • • • • • • • • • • •P1A-S0�0D �0 • • • • • • • • • • • • • • **P1A-S0�5D �5 • • • • • • • • • • • • • • **Double acting with adjustable end-cushioning:

P1A-S016M 16 • • • • • • • • • • • • • •P1A-S0�0M �0 • • • • • • • • • • • • • • **P1A-S0�5M �5 • • • • • • • • • • • • • • **Single acting, spring return:

P1A-S010SS 10 • • • • • •P1A-S01�SS 1� • • • • • •P1A-S016SS 16 • • • • • •P1A-S0�0SS �0 • • • • • •P1A-S0�5SS �5 • • • • • •Single acting, spring-extended:

P1A-S016TS 16 • • • • •P1A-S0�0TS �0 • • • • • •P1A-S0�5TS �5 • • • • • •* StandardstrokelengthsinmmaccordingtoISO4393** Maxstroke1000mm

13

P1A Cylinders

08.04


DataWorkingpressure max. 10barWorkingtemperature max.+80°C min. –�0°C

Single-acting spring returnFixed end cushioning

Cyl.bore Stroke Order codemm mm

10 10 P1A-S010SS-0010 Conn.M5 15 P1A-S010SS-0015 �5 P1A-S010SS-0025 40 P1A-S010SS-0040 50 P1A-S010SS-0050 80 P1A-S010SS-0080



20 10 P1A-S020SS-0010 Conn.G1/8 15 P1A-S020SS-0015 �5 P1A-S020SS-0025 40 P1A-S020SS-0040 50 P1A-S020SS-0050 80 P1A-S020SS-0080

25 10 P1A-S025SS-0010 Conn.G1/8 15 P1A-S025SS-0015 �5 P1A-S025SS-0025 40 P1A-S025SS-0040 50 P1A-S025SS-0050 80 P1A-S025SS-0080

Cylindersaresuppliedcompletewithneckmountingandpistonrodnuts.

Single-actingspring-extendedFixed end cushioning


16 10 P1A-S016TS-0010 Conn.M5 15 P1A-S016TS-0015 �5 P1A-S016TS-0025 40 P1A-S016TS-0040 50 P1A-S016TS-0050

20 10 P1A-S020TS-0010 Conn.G1/8 15 P1A-S020TS-0015 �5 P1A-S020TS-0025 40 P1A-S020TS-0040 50 P1A-S020TS-0050 80 P1A-S020TS-0080

25 10 P1A-S025TS-0010 Conn.G1/8 15 P1A-S025TS-0015 �5 P1A-S025TS-0025 40 P1A-S025TS-0040 50 P1A-S025TS-0050 80 P1A-S025TS-0080

Cylindersaresuppliedcompletewithneckmountingandpistonrodnuts.

14

P1A Cylinders

08.04


Fixed end cushioning


20 10 P1A-S020DS-0010 Conn.G1/8 15 P1A-S020DS-0015 �0 P1A-S020DS-0020 �5 P1A-S020DS-0025 30 P1A-S020DS-0030 40 P1A-S020DS-0040 50 P1A-S020DS-0050 80 P1A-S020DS-0080 100 P1A-S020DS-0100 1�5 P1A-S020DS-0125 160 P1A-S020DS-0160 �00 P1A-S020DS-0200 �50 P1A-S020DS-0250Maxstroke1000mm 3�0 P1A-S020DS-0320

25 10 P1A-S025DS-0010 Conn.G1/8 15 P1A-S025DS-0015 �0 P1A-S025DS-0020 �5 P1A-S025DS-0025 30 P1A-S025DS-0030 40 P1A-S025DS-0040 50 P1A-S025DS-0050 80 P1A-S025DS-0080 100 P1A-S025DS-0100 1�5 P1A-S025DS-0125 160 P1A-S025DS-0160 �00 P1A-S025DS-0200 �50 P1A-S025DS-0250Maxstroke1000mm 3�0 P1A-S025DS-0320

Cylindersaresuppliedcompletewithneckmountingandpistonrodnuts.CylinderswithThroughpistonrodsaresuppliedwithtwopistonrodnutsandoneneckmountingnut.


Double-actingFixed end cushioning


10 10 P1A-S010DS-0010 Conn.M5 15 P1A-S010DS-0015 �0 P1A-S010DS-0020 �5 P1A-S010DS-0025 30 P1A-S010DS-0030 40 P1A-S010DS-0040 50 P1A-S010DS-0050 80 P1A-S010DS-0080 100 P1A-S010DS-0100Maxstroke500mm 1�5 P1A-S010DS-0125

12 10 P1A-S012DS-0010 Conn.M5 15 P1A-S012DS-0015 �0 P1A-S012DS-0020 �5 P1A-S012DS-0025 30 P1A-S012DS-0030 40 P1A-S012DS-0040 50 P1A-S012DS-0050 80 P1A-S012DS-0080 100 P1A-S012DS-0100 1�5 P1A-S012DS-0125 160 P1A-S012DS-0160Maxstroke500mm �00 P1A-S012DS-0200

16 10 P1A-S016DS-0010 Conn.M5 15 P1A-S016DS-0015 �0 P1A-S016DS-0020 �5 P1A-S016DS-0025 30 P1A-S016DS-0030 40 P1A-S016DS-0040 50 P1A-S016DS-0050 80 P1A-S016DS-0080 100 P1A-S016DS-0100 1�5 P1A-S016DS-0125 160 P1A-S016DS-0160Maxstroke500mm �00 P1A-S016DS-0200

15

P1A Cylinders

08.04


Double-actingAdjustable cushioning


16 �0 P1A-S016MS-0020 Conn.M5 �5 P1A-S016MS-0025 30 P1A-S016MS-0030 40 P1A-S016MS-0040 50 P1A-S016MS-0050 80 P1A-S016MS-0080 100 P1A-S016MS-0100 1�5 P1A-S016MS-0125 160 P1A-S016MS-0160 �00 P1A-S016MS-0200 �50 P1A-S016MS-0250 3�0 P1A-S016MS-0320 400 P1A-S016MS-0400Maxstroke500mm 500 P1A-S016MS-0500

20 �0 P1A-S020MS-0020 Conn.G1/8 �5 P1A-S020MS-0025 30 P1A-S020MS-0030 40 P1A-S020MS-0040 50 P1A-S020MS-0050 80 P1A-S020MS-0080 100 P1A-S020MS-0100 1�5 P1A-S020MS-0125 160 P1A-S020MS-0160 �00 P1A-S020MS-0200 �50 P1A-S020MS-0250 3�0 P1A-S020MS-0320 400 P1A-S020MS-0400Maxstroke1000mm 500 P1A-S020MS-0500



25 �0 P1A-S025MS-0020 Conn.G1/8 �5 P1A-S025MS-0025 30 P1A-S025MS-0030 40 P1A-S025MS-0040 50 P1A-S025MS-0050 80 P1A-S025MS-0080 100 P1A-S025MS-0100 1�5 P1A-S025MS-0125 160 P1A-S025MS-0160 �00 P1A-S025MS-0200 �50 P1A-S025MS-0250 3�0 P1A-S025MS-0320 400 P1A-S025MS-0400Maxstroke1000mm 500 P1A-S025MS-0500

Cylindersaresuppliedcompletewithneckmountingandpistonrodnuts.CylinderswithThroughpistonrodsaresuppliedwithtwopistonrodnutsandoneneckmountingnut.

16

08.04


P1A with rod guidance modulesTheP1Aseriescylinderscanbeequippedwithanexternalguidingdevicetopreventthepistonrodfromturning.Whenfittedtheguideprovidesaguidedpistonmovementenablingthecylindertoresistturningmomentsonthepistonrod,aswellasgreatertransverseforces.RodguidesareavailablewithplainbearingsasUstyleorlinearballbearingsasHstyle.

Thebracket,whichhaspre-drilledmountingholes,isconnectedtothepistonrodbymeansofaflexocoupling,whichpreventsthebuild-upofstressinthecylinder.

P1Acylinderswithguidingdeviceareavailablewithboresfrom1�to�5mm,andstrokelengthsupto�50mm.Separateguidingdevicekitscanbesuppliedonrequestaccordingtotheorderkeybelow.

Technical dataWorkingpressure max10barWorkingtemperature –�0°Cto+80°C

Material specifications, guidance modulesBody AnodisedaluminiumGuidebars,Hstyle HardenedstainlesssteelFrontplate AnodisedaluminiumGuidebars,Ustyle StainlesssteelFrontplate Zinc-platedsteelPlainbearings Bronze

Otherdataasstandardcylinder.

P 1 A - 4 D R H - X X X X

Order key

U style H style

S=LoadcentrelineX=Loaddistance(mm)Transverse force as a function of load distance

Cylinder version

A MiniISOcylinders

Bore size mm

D 1�,16

H �0

J �5

Guide module type

H Hstyle,ballbearings

K Ustyle,plainbearings

Stroke length (mm)

Sameasforthecylinder

P1A RodGuidanceModules

100 200 300

20

40

60

80

100

120

00

Ø20-25

Ø12-16

Load (N) U style

Load centre line X (mm100 200 300 400 500 600

20

40

60

80

100

120

00

Ø20-25

Ø12-16

Load (N) H style

Load centre line X (mm

17

08.04



Dimensions, U style guidance modules, plain bearings

Cyl. bore A1 A2 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 C1 C2 D1 D2 D3 D4

1�/16 30 65 �7 63 3� �5,0 54 7,5 10 �4 15 �� 8 46 4,5 8,0 5,5 -�0 34 79 3� 76 40 3�,5 68 14,0 1� 38 �0 �3 10 58 5,5 10,5 6,5 11�5 34 79 3� 76 40 3�,5 68 14,0 1� 38 �0 �3 10 58 5,5 10,5 6,5 11

Cyl. bore D5 D6 E1 E2 E3 F1 G1 L1 L2 L3 L5 SW1 SW2 SW3 R1 R2 H1 H2

1�/16 M4 M4 8 4,6 - 16 16 69 39 17 5� �� 8 19 M4 8 46 �0�0 M5 M6 1� 5,6 7 �� 30 85 55 15 70 30 13 �7 M6 11 58 30�5 M5 M6 1� 5,6 7 �� 3 85 55 15 70 30 13 �7 M6 11 58 30

Cyl. bore Weight stroke 0 mm Additional weight per 10 mm stroke kg kg

1�/16 0,�6 0,0078�0 0,47 0,1�33�5 0,47 0,1�33

S=Stroke

B9

A2

B2

B5

B3

B1

A1

L1 + S

L3 + S

B6

L2

B4 B7

SW1

SW2

SW3H2C

2

R1 ØC

1

R2

B8

H1±

0,05

ØF

1 -0

/+0,

1

L5 -0/+5

G1

B10

ØD4

ØD3

E3

E2

ØD

1

ØD

2

D5

D6(8x) depth E1

Ø4H7(6x) depth 7

18

08.04


Dimensions, H style guidance modules, ball bearings

Cyl. bore A1 A2 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 C1 C2 C3 D1 D2 D3

1�/16 30 65 �7 63 3� 3�,5 54 13 10 �4 15 �� 8 46 �7 4,5 8,0 5,5�0 34 79 3� 76 40 3�,5 68 �1 1� 38 �0 �3 10 58 37 5,5 10,5 6,5�5 34 79 3� 76 40 3�,5 68 �1 1� 38 �0 �3 10 58 37 5,5 10,5 6,5

Cyl. bore D4 D5 D6 E1 E2 E3 F1 G1 L1 L2 L3 L4 L5 SW1 SW2 SW3 R1 R2

1�/16 9 M4 M4 8 4,6 6 16 16 130 75 44 35 51 �� 8 19 M4 8�0 11 M5 M6 1� 5,6 7 �� 30 160 108 43 5� 65 30 13 �7 M6 11�5 11 M5 M6 1� 5,6 7 �� 3 160 108 43 5� 65 30 13 �7 M6 11

Cyl. bore H1 H2 H3

1�/16 46 -3,�5 8,5�0 58 4,75 15,0�5 58 4,75 15,0

Cyl. bore Weight stroke 0 mm Additional weight per 10 mm stroke kg kg

1�/16 0,43 0,0078�0 0,77 0,1�33�5 0,77 0,1�33

S=Stroke

B9

A2

B2

B5

B3

B1A1

L1 + S

L3 + S

B6

L2

B4

L4

B7

SW1

SW2

SW3

H2

H3

C2 C3

R1 Ø

C1

R2

B8

H1±

0,05

ØF

1 -0

/+0,

1

L5 -0/+5

G1

B10

ØD4

ØD3E

3

E2

ØD

1Ø

D2

D5

D6(8x) depth E1

Ø4H7(6x)depth 7


19

08.04


Flange-MF8 Intendedforfixedattachmentofthecylinder.Theflangeisdesignedformountingonthefrontorrearend-covers.Material:Surface-treatedsteel

Stainless Flange-MF8 Intendedforfixedattachmentofthecylinder.Theflangeisdesignedformountingonthefrontorrearend-covers.Material:Stainlesssteel,DINX10CrNiS189

Cylinder A B C D E FØmm mm mm mm mm mm mm

10 4,5 30 40 �� 3 131�-16 5,5 40 5� 30 4 18�0 6,6 50 66 40 5 19�5 6,6 50 66 40 5 �3

Foot-MS3 Intendedforfixedattachementofthecylinder.Thebracketisdesignedformountingonthefrontorrearend-covers.Material:Surface-treatedsteel

Stainless Foot-MS3 Intendedforfixedattachementofthecylinder.Thebracketisdesignedformountingonthefrontorrearend-covers.Material:Stainlesssteel,DINX10CrNiS189

Cylinder A B C D E F G H IØmm mm mm mm mm mm mm mm mm mm

10 4,5 16 �5 35 3 �4 �6,0 16 111�-16 5,5 �0 3� 4� 4 3� 3�,5 �0 14�0 6,5 �5 40 54 5 36 45,0 �5 17�5 6,5 �5 40 54 5 40 45,0 �5 17

Cylinder mountingsType Description Cyl.bore Weight Ordercode ∅ mm kg

10 0,01� P1A-4CMB1�-16 0,0�5 P1A-4DMB�0-�5 0,045 P1A-4HMB

10 0,0�0 P1A-4CMF1�-16 0,040 P1A-4DMF�0-�5 0,080 P1A-4HMF

D

C

G

E B

A

I

F

H

E F

A

D

B

C

10 0,01� P1S-4CMB1�-16 0,0�5 P1S-4DMB�0-�5 0,045 P1S-4HMB

10 0,0�0 P1S-4CMF1�-16 0,040 P1S-4DMF�0-�5 0,080 P1S-4HMF

P1A Mountings

�0

08.04


Cover trunnion Intendedforarticulatedmountingofthecylinder.Theflangeisdesignedformountingonthefrontorrearend-covers.Material:Surface-treatedsteel

Cylinder A Bh14C D E1 Fe9 G HØmm mm mm mm mm mm mm mm mm

10 1�,5 �6 38 �0 9 4 6 101�-16 16,5 38 58 �5 13 6 8 14�0 ��,5 46 66 30 13 6 8 16�5 ��,5 46 66 30 13 6 8 �0

Cover trunnion Intendedforarticulatedmountingofthecylinder.TheStainless steel flangeisdesignedformountingonthefrontorrearend-

covers.Material:Stainlesssteel,DINX10CrNiS189

Cylinder A Bh14C D E Fe9 G HØmm mm mm mm mm mm mm mm mm

10 1�,5 �6 38 �0 8 4 6 101�-16 16,5 38 58 �5 10 6 8 14�0 ��,5 46 66 30 10 6 8 16�5 ��,5 46 66 30 10 6 8 �0

Stainless Mounting nut Intendedforfixedmountingofthecylinder.Cylindersaresuppliedcompletewithonemountingnut.Material:Stainlesssteel,DINX5CrNi1810

Cylinder A B CØmm mm mm

10 19 6 M1�x1,�51�-16 �4 8 M16x1,50�0-�5 3� 11 M��x1,50

10 0,014 P1A-4CMJZ1�-16 0,033 P1A-4DMJZ�0-�5 0,037 P1A-4HMJZ

10 0,014 P1A-4CMJ1�-16 0,033 P1A-4DMJ�0-�5 0,037 P1A-4HMJ


ØAD E ØF

BC

G H

A

B

C

10 0,009 91267254051�-16 0,018 9126725406�0-�5 0,04� 9126725407

P1A Mountings

ØA

D E1

ØF

BC

G H

�1

08.04



Clevis bracket Intendedforarticulatedmountingofthecylinder.Suppliedwithshaftformountingontherearendcover.Material:Bracket:surface-treatedsteel,blackPin:surfacehardenedsteelCirclips:accordingtoDIN471:Stainlesssteel

Clevis bracket Intendedforarticulatedmountingofthecylinder.Suppliedwithshaftformountingontherearendcover.Material:Bracket:stainlesssteel,DINX5CrNi1810Pin:temperedstainlesssteel,DINX�0Cr13Lockingrings:stainlesssteel,DINX5CrNi1810

Cylinder A B C D E F G H I JØmm mm mm mm mm mm mm mm mm ° °

10 4,5 13 8 �4 1�,5 �0 65,3 5 160 171� 5,5 18 1� �7 15,0 �5 73,0 7 170 1516 5,5 18 1� �7 15,0 �5 80,0 7 170 15�0 6,5 �4 16 30 �0,0 3� 91,0 10 165 10�5 6,5 �4 16 30 �0,0 3� 100,010 165 10S=stroke

Clevis AccordingtoISO8140Intendedforarticulatedmountingofthecylinder.Thismountingisadjustableintheaxialdirection.Suppliedcompletewithpin.Material:Galvanizedsteel

Stainless Clevis AccordingtoISO8140Intendedforarticulatedmountingofthecylinder.Thismountingisadjustableintheaxialdirection.Suppliedcompletewithpin.Material:Stainlesssteel,DINX5CrNi1810

Cylinder A B C D E F G H I JØmm mm mm mm mm mm mm mm mm mm

10 4 M4 �,� 8 8 5 16 4 ��,0 �,01�-16 6 M6 3,� 1� 1� 7 �4 6 31,0 3,0�0 8 M8 4,0 16 16 10 3� 8 40,5 3,5�5 10 M10x1,�5 5,0 �0 �0 1� 40 10 49,0 3,0

10 0,0�0 P1A-4CMT1�-16 0,040 P1A-4DMT�0-�5 0,080 P1A-4HMT

10 0,007 P1A-4CRC1�-16 0,0�� P1A-4DRC�0 0,045 P1A-4HRC�5 0,095 P1A-4JRC

I±J

D

C G

E F

A

H DB

A

C

BH

D

EF

J

G + S

I

10 0,0�0 P1S-4CMT1�-16 0,040 P1S-4DMT�0-�5 0,080 P1S-4HMT

10 0,007 P1S-4CRC1�-16 0,0�� P1S-4DRC�0 0,045 P1S-4HRC�5 0,095 P1S-4JRC

P1A Mountings

��

08.04


Swivel rod eye AccordingtoISO8139Intendedforarticulatedmountingofthecylinder.Thismountingisadjustableintheaxialdirection.Material:Swivelrodeye:GalvanizedsteelBall:hardenedsteel

Stainless Swivel rod eye AccordingtoISO8139Intendedforarticulatedmountingofthecylinder.Thismountingisadjustableintheaxialdirection.Material:Swivelrodeye:stainlesssteel,DINX5CrNi1810Ball:hardenedstainlesssteel,DINX5CrNi1810

Cylinder A B C D E F G H I J K LØmm mm mm mm mm mm mm mm mm mm mm mm

10 5 M4 �,� 8 10 9 �7 6,0 8 33,0 9 �,01�-16 6 M6 3,� 9 10 10 30 6,8 9 38,5 11 1,5�0 8 M8 4,0 1� 1� 1� 36 9,0 1� 46,0 14 �,0�5 10 M10x1,�5 5,0 14 14 14 43 10,5 15 5�,5 17 �,5

Stainless Rod nut Intendedforfixedmountingonthepistonrod.Cylindersaresuppliedcompletewithonerodnut.(cylinderswiththroughpistonrodaresuppliedwithtworodnuts.)Material:Stainlesssteel,DINX5CrNi1810

Cylinder D F EØmm mm mm

10 M4 7 �,�1�-16 M6 10 3,��0 M8 13 4,0�5 M10x1,�5 17 5,0

10 0,017 P1A-4CRS1�-16 0,0�5 P1A-4DRS�0 0,045 P1A-4HRS�5 0,085 P1A-4JRS

10 0,001 91273851211�-16 0,00� 9127385122�0 0,005 9127385123�5 0,007 9126725404


E

FD

10 0,017 P1S-4CRT1�-16 0,0�5 P1S-4DRT�0 0,045 P1S-4HRT�5 0,085 P1S-4JRT

P1A Mountings

�3

P1A Sensors

08.04


Our global series of sensorsThisseriesofsensorsisalreadybeingusedorwillbeusedinallfuturerangesinourglobalproductprogrammeinvolvingcylinders/actuators.Thesensorshavesmallinstallationdimensionsandeitherfitintothegrooveinthecaseprofileor,asshownhere,arefastenedtothecylinderusingaspecialattachment.Youcanchoosefromelectronicorreedsensorswitharangeofcablelengthsfittedwith8mmorM1�terminals.

Electronic sensors Thenewelectronicsensorsare”SolidState”,i.e.theyhavenomovingpartsatall.Theyareprovidedwithshort-circuitprotectionandtransientprotectionasstandard.Thebuilt-inelectronicsmakethesensorssuitableforapplicationswithhighonandoffswitchingfrequency,andwhereverylongservicelifeisrequired.

Technical dataDesign GMR(GiantMagneticResistance) magneto-resistivefunctionInstallation SensormountingP8S-TMC01Outputs PNP,normallyopen(alsoavailablein NPNdesign,normallyclosed, onrequest)Voltagerange 10-30VDC 10-18VDC,ATEXsensorRipple max10%Voltagedrop max�,5VLoadcurrent max100mAInternalconsumption max10mAActuatingdistance min9mmHysteresis max1,5mmRepeatabilityaccuracy max0,�mmOn/offswitchingfrequency max5kHzOnswitchingtime max�msOffswitchingtime max�msEncapsulation IP67(EN605�9)Temperaturerange –�5°Cto+75°C –�0°Cto+45°C,ATEXsensorIndication LED,yellowMaterialhousing PA1�Materialscrew StainlesssteelCable PVCorPUR3x0.�5mm�

seeordercoderespectively

Reed sensors Thesensorsarebasedonprovenreedswitches,whichofferreliablefunctioninmanyapplications.Simpleinstallation,aprotectedpositiononthecylinderandclearLEDindicationareimportantadvantagesofthisrangeofsensors.

Technical dataDesign ReedelementMounting SensormountingP8S-TMC01Output Normallyopen,ornormallyclosedVoltagerange 10-30VAC/DCor 10-1�0VAC/DC �4-�30VAC/DCLoadcurrent max500mAfor10-30Vor max100mAfor10-1�0V max30mAfor�4-�30VBreakingpower(resistive) max6W/VAActuatingdistance min9mmHysteresis max1,5mmRepeatabilityaccuracy 0,�mmOn/offswitchingfrequency max400HzOnswitchingtime max1,5msOffswitchingtime max0,5msEncapsulation IP67(EN605�9)Temperaturerange –�5°Cto+75°CIndication LED,yellowMaterialhousing PA1�Materialscrew StainlesssteelCable PVCorPUR3x0.14mm�

seeordercoderespectively

�4

P1A Sensors

08.04


Sensors

31,5

37

M8x

1M

8x1

4,3

6,1

4,6

9,7

31,5 - 36

1

4

3DC

Brown

Black

Blue

1

4

3AC/DC

1

4

3+(–)VAC/DC

Signal

–(+)VAC/DC

Brown

Black

Blue

AC/DC

Brown

Blue

P8S-GRFLX / P8S-GRFLX2

143

+(–)VAC/DC

Signal–(+)VAC/DC

M8 M12

1

4

3+VDC

Signal

–VDC143

+VDC

Signal–VDC

M8 M12

Electronic sensors Reed sensors

AC/DC

P8S-GCFPX

Brown

Blue

Dimensions

Sensor mounting P8S-TMC01

20,98,3 M3

14,6

31,214,1

�5

P1A Sensors

08.04


Ordering data

Output/function Cable/connector Weight Order code kg

Electronic sensors , 10-30 V DC

PNPtype,normallyopen 0,�7mPUR-cableand8mmsnap-inmaleconnector 0,007 P8S-GPSHXPNPtype,normallyopen 1,0mPUR-cableand8mmsnap-inmaleconnector 0,013 P8S-GPSCXPNPtype,normallyopen 1,0mPUR-cableandM8screwmaleconnector 0,013 P8S-GPCCXPNPtype,normallyopen 0,�7mPUR-cableandM1�screwmaleconnector 0,015 P8S-GPMHXPNPtype,normallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GPFLXPNPtype,normallyopen 10mPVC-cablewithoutconnector 0,110 P8S-GPFTX

Electronic sensor 18-30 V DC ATEX-certified

TypePNP,normallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GPFLX/EX

Reed sensors , 10-30 V AC/DC

Normallyopen 0,�7mPUR-cableand8mmsnap-inmaleconnector 0,007 P8S-GSSHXNormallyopen 1,0mPUR-cableand8mmsnap-inmaleconnector 0,013 P8S-GSSCXNormallyopen 1,0mPUR-cableandM8maleconnector 0,013 P8S-GSCCXNormallyopen 0,�7mPUR-cableandM1�screwmaleconnector 0,015 P8S-GSMHXNormallyopen 1,0mPUR-cableandM1�screwmaleconnector 0,0�3 P8S-GSMCXNormallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GSFLXNormallyopen 10mPVC-cablewithoutconnector 0,110 P8S-GSFTXNormallyclosed 5mPVC-cablewithoutconnector1) 0,050 P8S-GCFPX

Reed sensors, 10-120 V AC/DC

Normallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GRFLX

Reed sensorer, 24-230 V AC/DC

Normallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GRFLX2

1)WithoutLED

Sensor mounting

Description Weight Order code kg

SensormountingforcylinderP1AcylinderboreØ10toØ�5mm 0,07 P8S-TMC01

II3G EEx nA II T4X II3D 135 °C IP67

�6

P1A Sensors

08.04


Sensors for special applicationsSensorsforapplicationswheretheshortinstallationlengthandthe90degreecableoutletareimportantfactors.Thistypeofsensorisangoodalternativeifacylinderhasashortstrokeortightinstallation,andinstallationiseasierthanourglobalseriesofsensors.

Technical dataDesign HallelementOutput PNPresp.NPN,N.O.Voltagerange 10-30VDCMaxpermissibleripple 10%Maxvoltagedrop ≤0,5Vat100mAMaxloadcurrent,P1A-�XMK,LK 150mAP1A-�XHK,EK,JH,FH 100mAMaxbreakingpower(resistive) 6WInternalconsumption <30mAat30VMinactuatingdistance 5mmHysteresis 1,1-1,3mmRepeatabilityaccuracy ±0,1mmMaxon/offswitchingfrequency 1kHzMaxon/offswitchingtime 0,8/3,0µsEncapsulation,P1A-�XJH,FH IP65Encapsulation,P1A-�XHK,EK,MK,LK IP67Temperaturerange –10°Cto+60°CIndication LEDShockresistance 40gMaterial,housing Polyamid11Material,mould EpoxyCable PVC3x0,15mm�

Cableincl.femalepartconnector PVC3x0,15mm�

Connector Diam.8mmsnaponMounting MountingyokeMaterial,mounting Acetal/StainlesssteelMaterial,screw Stainlesssteel

Ordering data

Output Cable Weight Order code length kg

Electronic sensors

PNP,N.O. �m 0,040 P1A-2XMKNPN,N.O. �m 0,040 P1A-2XLK

Mountngs for sensors

ForcylinderØ10 0,005 P1A-2CCCForcylinderØ1� 0,005 P1A-2DCCForcylinderØ16 0,008 P1A-2FCCForcylinderØ�0 0,008 P1A-2HCCForcylinderØ�5 0,010 P1A-2JCC

Black

Red

White White

Black

Red

P1A-2XMK P1A-2XLK

LED

1412 19

3 x 0,15 mm, 2 m

DimensionsP1A-2XMK and P1A-2XLK

Electronic sensor symbol

�7

P1A Sensors

08.04


Asaccessoriesthesystemcomprisesalargenumberofdifferentcablesinordertomeetallrequirementsthatmayariseandtomaketheinstallationsimple,fastandreliable. Cableswithmoulded8mmsnap-inroundcontactsinbothends.Thecablesareavailableintwotypes,onewithastraightmaleandfemaleconnectorsrespectively,andonewithastraight3-polemaleconnectorinoneendandanangled3-polefemaleconnectorintheotherend.

Technical dataContactsMoulded8mmsnap-inmale/femalecontacts.Enclosure IP67

CableConductor 3x0,�5mm�(3�x0,10mm�)Sheath PVC/PURColour Black

Designation Weight Order code kg

Cablewithstraightcontacts,0,�m 0,0� 9121717014Cablewithstraightcontacts,0,3m 0,0� 9121717015Cablewithstraightcontacts,0,5m 0,03 9121717016Cablewithstraightcontacts,1,0m 0,03 9121717017Cablewithstraightcontacts,�,0m 0,05 9121717018Cablewithstraightcontacts,3,0m 0,07 9121717019Cablewithstraightcontacts,5,0m 0,1� 9121717020Cablewithstraightcontacts,10m 0,�3 9121717021


Cablewithstraightandangledconnectors,0,�m0,0� 9121717022Cablewithstraightandangledconnectors,0,3m0,0� 9121717023Cablewithstraightandangledconnectors,0,5m0,03 9121717024Cablewithstraightandangledconnectors,1,0m0,03 9121717025Cablewithstraightandangledconnectors,�,0m0,05 9121717026Cablewithstraightandangledconnectors,3,0m0,07 9121717027Cablewithstraightandangledconnectors,5,0m0,1� 9121717028Cablewithstraightandangledconnectors,10m 0,�3 9121717029

Type of cable Cable/connector Weight Order code kg

Cables for sensors, complete with one female connector

Cable,FlexPVC 3m,8mmSnap-inconnector 0,07 9126344341Cable,FlexPVC 10m,8mmSnap-inconnector 0,�1 9126344342Cable,SuperFlexPVC 3m,8mmSnap-inconnector 0,07 9126344343Cable,SuperFlexPVC 10m,8mmSnap-inconnector 0,�1 9126344344Cable,Polyurethane 3m,8mmSnap-inconnector 0,01 9126344345Cable,Polyurethane 10m,8mmSnap-inconnector 0,�0 9126344346Cable,Polyurethane 5m,M1�screwconnector 0,07 9126344348Cable,Polyurethane 10m,M1�screwconnector 0,�0 9126344349

Male connectors for connecting cablesCableconnectorsforproducingyourownconnectingcables.Theconnectorscanbequicklyattachedtothecablewithoutspecialtools.Onlytheoutersheathofthecableisremoved.TheconnectorsareavailableforM8andM1�screwconnectorsandmeetprotectionclassIP65.

Connector Weight Order code kg

M8screwconnector 0,017 P8SCS0803JM1�screwconnector 0,0�� P8SCS1204J

Connecting cables with one connectorThecableshaveanintegralsnap-infemaleconnector.

Cableswithstraight3-polemaleandfemaleconnectorsrespectively. Cableswithastraight3-polemaleconnectorinoneendandanangled3-polefemaleconnectorintheotherend.

Ready to use connecting cables with connectors at each end

�8

P1A Sensors

08.04


Connection block Valvetronic 110TheValvetronic110isaconnectionblockthatcanbeusedforcollectingsignalsfromsensorsatvariouspointsonamachineandconnectingthemtothecontrolsystemviaamulticorecable.Valvetronic110canalsobeusedforcentralconnectionofthemulti-corecabletotheoutputsofacontrolsystem,andcanbelaidtoamachinewheretheoutputsignalscanbeconnected.Theconnectionblockhasten8mmsnap-incircularconnectorsandamulti-corecablewhichisavailableinlengthsof3or10m.Theconnectionsontheblockarenumberedfrom1to10.Blankingplugsareavailableforunusedconnections,aslabelsformarkingtheconnectionsofeachblock.

18,7

12,5

825 12

9,2 20,5

L

30,5

8575

M3

6 7 8 9 10

1 2 3 4 5

3 3 3 3 3

2 2 2 2 2

1 1 1 1 1

3 3 3 3 3

2 2 2 2 2

1 1 1 1 1

A

5 43 21

67 89 10B

Technical dataConnections:Ten3-polenumbered8mmroundsnap-infemalecontacts Inputblock Pin1 Common,+�4VDC Pin� Inputsignal Pin3 Common,0V

Outputblock Pin1 Common,GND Pin� Outputsignal Pin3 Common,0V

Electrical data:Voltage �4VDC(max.60VAC/75VDC)Insulationgroup accordingtoDIN0110classCLoad max.1Aperconnection totalmax.3A

Cable:Length 3mor10mTypeofcable LifYY11YConductor 1�Area 0.34mm�

Colourmarking AccordingtoDIN47100

32

1

32

1

Mechanical dataEnclosure IP67,DIN40050withfittedcontactsand/or blankingplugs.Temperature –�0°Cto+70°C

MaterialBody PA6,6VDaccordingtoUL94Contactholder PBTPSnap-inring LDPEMouldingmass EpoxySeal NBRScrews Platedsteel

Industrial durabilityGoodchemicalandoilresistance.Testsshouldbeperformedinaggressiveenvironments.

Ordering data


ConnectionblockValvetronic110with3mcable 0,3� 9121719001 ConnectionblockValvetronic110with10mcable 0,95 9121719002

Blankingplugs(packof10) 0,0� 9121719003 Useblankingplugstocloseunusedconnections.

Labels(packof10) 0,0� 9121719004 Whitelabelstoinsertingroovesonthesideoftheconnection

Dimensions and wiring diagrams

Conductor Colour Input Output

1 Pink Signal 1 Signal 1 2 Grey Signal 2 Signal 2 3 Yellow Signal 3 Signal 3 4 Green Signal 4 Signal 4 5 White Signal 5 Signal 5 6 Red Signal 6 Signal 6 7 Black Signal 7 Signal 7 8 Violet Signal 8 Signal 8 9 Grey-Pink Signal 9 Signal 9 10 Red-Blue Signal 10 Signal 10 A Blue 0 V 0 V B Brown +24 V PE

pneumatic cylinders - v-king

Documents