pneumatic assembly tool catalog - jountool.com
TRANSCRIPT
AIR SHUTOFF TOOLS
CLUTCH SHUTOFF TOOLS
Pneumatic
Assembly
Tool Catalog
Assembly Technologies
ERROR PROOFING
FIXTURED TOOLS
Stanley Offers a Range of Standard Pneumatic Threaded Fastener Assembly Solutions
Stanley CT Clutch Shut Off Nutrunners
Torque Range: 5 - 135 Nm, 3.5 - 100 lb ftHand-Held
Torque Range: 2 - 27 Nm, 1.5 - 20 lb ftFixtured
Torque Range: 7 - 245 Nm, 6 - 180 lb ft
Stanley TA Shut Off Nutrunners
Torque Range: 1.5 - 2035 Nm, 1 - 1500 lb ftHand-Held
Fixtured
PSI Controller Enables Error Proofingof All Pneumatic Tool Types
Improves Assembly Qualityby Enabling Bolt Counting to Prevent Missed Fasteners
WORK STATION
PLC
PE Screwdrivers Torque Range: 0.5 - 10 Nm, 4.4 - 89 lb in
Torque Adjustment Indicator
Patented CT clutch rolling elementreduces the need for torque adjustment
PAGE
20
31
26
13
22
1
PE Pulse Nutrunners Torque Range: 7 - 120 Nm, 5 - 88 lb ft
32
www.StanleyAssembly.com 1 RevB0803
A30 and A40 PISTOL GRIP NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TA” shut-off mechanism gives reliable performance
Ergonomics Improve Operator Interface
¶ Underslung pistol grip handle has balance and comfortable grip
¶ Convenient reverse actuator allows one-handed operation
Min Hose: A30: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); 10 l/s (20 ft3/m) A40: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“L”
LENGTH WEIGHT
A30U MODELS RPM Nm lb in mm in mm in kg lb
NON-REVERSIBLE
A30UTA-45 3400 1.2 - 2.4 11 - 21
A30UTA-30 2350 1.7 - 3.4 15 - 30 140 5.5 0.9 2
A30UTA-22 1700 2.4 - 4.7 21 - 42
A30UTA-16 1300 3.2 - 6.3 28 - 56 21 0.81 146 5.75
A30UTA-9 725 5.7 - 11.4 50 - 100
A30UTA-7 500 8 - 16 71 - 141 160 6.3 1.0 2.3
REVERSIBLE
A30URTA-36 2600 1 - 2 9 - 17
A30URTA-25 1850 1.4 - 2.7 12 - 24 140 5.5 0.9 2
A30URTA-18 1360 1.8 - 3.5 17 - 33
A30URTA-13 1000 2.8 - 5.6 25 - 50 21 0.81 146 5.75
A30URTA-7 550 4.5 - 9 40 - 80
A30URTA-5 385 6.5 - 13 58 - 115 160 6.3 1.0 2.3
A40SB MODELS RPM Nm lb ft mm in mm in kg Lb
NON-REVERSIBLE
A40SBTA-15 1375 10 - 20 7.5 - 15 175 6.9 2.2 4.9
A40SBTA-9 840 18 - 35 12.5 - 25
A40SBTA-6 560 23 - 45 18 - 35 25 1.0 201 7.9 2.5 5.5
A40SBTA-5 350 30 - 60 23 - 45
A40SBTA-4 330 43 - 85 30 - 60
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A30U ADDITIONAL COST OPTIONS: A40SB ADDITIONAL COST OPTIONS:
B3432 Suspension Bail A3486 Dead Handle Ass’y (Recommended for Max Torque >7 Nm, 60 lb in)
F3505 Front Exhaust Deflector
F4016 Swivel Bail A4072 Steel Torque Bar H1166 Base Mount Bracket See Options & Accessories for A40_B Spindle Options
A30UTA Pistol Grip Nutrunners give good torque control with “TA” pneumatic shut-offSTANDARD CONFIGURATION:1/4” Hex Quick Change ChuckF3504 Side Exhaust Deflector
A40SBTA Swivel Pistol Grip Nutrunners give good torque control with “TA” pneumatic shut-offSTANDARD CONFIGURATION:3/8” Sq Drive (-15, -9, -6) 1/2” Sq Drive (-5, -4) A4517 Aluminum Torque Bar
A30UTA
A40SBTA
www.StanleyAssembly.com 2 RevB0803
A30 ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose: A30: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); 10 l/s (20 ft3/m) A40: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A30LATA-30 2900 2.2 - 4.3 1.6 - 3.2
A30LATA-20 2000 3.2 - 6.4 2.4 - 4.7 206 8.1 0.9 1.9
A30LATA-15 1500 4.3 - 8.5 6.3 13 0.5 34 1.32
A30LATA-11 1100 5.8 - 11.5 4.3 - 8.5 213 8.4
A30LATA-6 620 10.3 - 20.5 7.6 - 15.2 226 8.9 1.1 2.4
A30LA2ATA-3 350 18 - 36 13.5 - 27 17.5 0.69 40 1.56 279 11 1.5 3.3
REVERSIBLE
A30LRATA-24 2100 1.8 - 3.5 1.3 - 2.5
A30LRATA-16 1450 2.7 - 5.3 2 - 4 226 8.9 1 2.1
A30LRATA-12 1050 3.5 - 7 2.6 - 5.2 13 0.5 34 1.32
A30LRATA-9 800 4.8 - 9.5 3.5 - 7 234 9.2
A30LRATA-5 425 9 - 18 6.5 - 13 248 9.7 1.2 2.6
A30LRA2ATA-3 300 12.5 - 25 9 - 18 17.5 0.69 40 1.56 297 11.7 1.6 3.6
A30LRA2ATA-2 225 16. 5 - 33 12.5 - 25
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A30LATA ADDITIONAL COST OPTIONS: A30LA2ATA ADDITIONAL COST OPTIONS:
A3061 Vertical Bail B3432 Swivel Bail (LA-6, LRA-5) M3131 Exhaust Collector See Options & Accessories for A3_LA Head Assembly and Flush Socket Options
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6” Example: A30LATA-30-4E
A3061 Vertical Bail B3432 Swivel Bail M3131 Exhaust Collector See Options & Accessories for A3_L_A2A Head Assembly and Flush Socket Options
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10” Example: A30LRATA-24-4E
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TA” shut-off mechanism gives reliable performance
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A30LATA Angle Nutrunners give good torque control and easy access to tight areasSTANDARD CONFIGURATION:3/8” Square Drive
A30LA2ATA Angle Nutrunners give good torque control and easy access to tight areasSTANDARD CONFIGURATION:3/8” Square Drive
A30LATA
A30LA2ATA
www.StanleyAssembly.com 3 RevB0803
A40LA ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose: A30: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); 10 l/s (20 ft3/m) A40: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A40LATPM-6 600 27 - 54 20 - 40 17.5 0.69 40 1.56 429 16.9 2.5 5.6
A40LATPJM-10 975 17 - 33 12 - 24 17.5 0.69 40 1.56 429 16.9 2.5 5.4
A40LATPJM-6 600 27 - 54 20 - 40 455 17.9 2.7 5.9
REVERSIBLE
A40LRATPM-8 650 12 - 24 9 - 18 17.5 0.69 40 1.56 429 16.9 2.4 5.4
A40LRATPM-5 400 21 - 41 15 - 30 455 17.9 2.6 5.8
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A40LATPM/TPJM ADDITIONAL COST OPTIONS:
J4354 Swivel Bail
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10” Example: A40LATPM-6-4E
See Options & Accessories for A40L_A Head Assembly and Flush Socket Options
External Transducer Option (Add ‘X’ to MODEL eg: A40LATPM-10X)
S7674 Exhaust Collector A4590 Angle Head Reaction Bar N4433 Angle Head Split Reaction Bar
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LATPM Angle Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:3/8” Square Drive
A40LATPJM Angle Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:3/8” Square Drive
A40LATPM
A40LATPJM
www.StanleyAssembly.com 4 RevB0803
A40LA2 ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
40LA2TPM-5 475 34 - 68 25 - 50
A40LA2TPM-4 320 51 - 102 38 - 75 22 0.87 51 2.0 455 17.9 3.2 7.1
A40LA2TPM-3 255 63 - 126 47 - 93
A40LA2TPJM-8 800 21 - 41 15 - 30 455 17.9 3.1 6.8
A40LA2TPJM-5 475 34 - 68 25 - 50 22 0.87 51 2.0
A40LA2TPJM-4 320 51 - 102 38 - 75 480 18.9 3.3 7.3
A40LA2TPJM-3 255 63 - 126 47 - 93
REVERSIBLE
A40LRA2TPM-6 530 15.5 - 31 11.5 - 23 455 17.9 3.1 6.8
A40LRA2TPM-4 320 25 - 50 19 - 37 22 0.87 51 2.0
A40LRA2TPM-3 215 38 - 75 28 - 55 480 18.9 3.3 7.3
A40LRA2TPM-2 175 47 - 94 35 - 69
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A40LA2TPM/TPJM ADDITIONAL COST OPTIONS:
J4354 Swivel Bail
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10” Example: A40LA2TPM-5-4E
See Option Accessories for A40L-A2 Head Assembly and Flush Socket Options
External Transducer Option (Add ‘X’ to MODEL e.g.: A40LA2TPM-11X)
H1203 Base Mount Bracket S7674 Exhaust Collector A4590 Angle Head Reaction Bar N4433 Angle Head Slit Reaction Bar
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LA2TPM Angle Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:1/2” Square Drive
A40LA2TPJM Angle Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:1/2” Square Drive
A40LA2TPM
A40LA2TPJM
www.StanleyAssembly.com 5 RevB0803
A40LA3 ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A40LA3TPM-3 255 63 - 126 47 - 93 26 1.03 60 2.35 455 17.9 3.45 7.6
A40LA3TPM-2 200 78 - 156 58 - 115
A40LA3TPJM-3 255 63 - 126 47 - 93 26 1.03 60 2.35 480 18.9 3.6 8
A40LA3TPJM-2 200 78 - 156 58 - 115
REVERSIBLE
A40LRA3TPM-2 175 47 - 94 35 - 69 26 1.03 60 2.35 480 18.9 3.6 8
A40LRA3TPM-1 130 63 - 126 47 - 93
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A40LA3TPM/TPJM ADDITIONAL COST OPTIONS:
J4354 Swivel Bail
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10” Example: A40LA3TPM-3-4E
See Options & Accessories for A40L_A3 Head Assembly and Flush Socket Options
External Transducer Option (Add ‘X’ to MODEL eg: A40LA3TPM-3X)
H1141 Base Mount Bracket S7674 Exhaust Collector A4591 Angle Head Reaction Bar
N4434 Angle Head Split Reaction Bar
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LA3TPM Angle Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:1/2” Square Drive
A40LA3TPJM Angle Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:1/2” Square Drive
A40LA3TPM
A40LA3TPJM
www.StanleyAssembly.com 6 RevB0803
A40LA4 ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A40LA4TP-011 110 139 - 278 103 - 205 26 1.03 60 2.35 521 20.5 4.4 9.7
A40LA4TPJ-011 110 139 - 278 103 - 205 26 1.03 60 2.35 541 21.3 5 11
REVERSIBLE
A40LRA4TP-008 75 103 - 205 75 - 150 26 1.03 60 2.35 546 21.5 4.7 10.4
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A40LA4TP/TPJ ADDITIONAL COST OPTIONS:
F4015 Swivel Bail
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10” Example: A40LA4TPM-011-4E
See Options & Accessories for A40L_A4 Head Assembly and Flush Socket Options
External Transducer Option (Add ‘X’ to MODEL e.g.: A40LA4TP-015X)
H1141 Base Mount Bracket N4300 Exhaust Collector A4591 Angle Head Reaction Bar N4434 Angle Head Split Reaction Bar
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LA4TPJ Angle Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:5/8” Square Drive
A40LA4TP Angle Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:5/8” Square Drive
A40LA4TP
A40LA4TPJ
www.StanleyAssembly.com 7 RevB0304
A40LA5 ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A40LA5TP-011 110 140- 280 103 - 205 32 1.25 71 2.8 528 20.8 5.3 11.7
A40LA5TP-006 60 225 - 450 165 - 330
A40LA5TPJ-011 110 140 - 280 103 - 205 32 1.25 71 2.8 554 21.8 5.2 12.3
A40LA5TPJ-006 60 225 - 450 165 - 330
REVERSIBLE
A40LRA5TP-008 60 103 - 205 75 - 150 32 1.25 71 2.8 554 21.8 5.6 12.3
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A40LA5TP/TPJ ADDITIONAL COST OPTIONS:
F4015 Swivel Bail
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10”
Example: A40LA5TPM-011-4E
See Options & Accessories for A40L_A5 Head Assembly and Flush Socket Options
External Transducer Option (Add ‘X’ to MODEL e.g.: A40LA5TP-011X)
S5046 Base Mount Bracket N4300 Exhaust Collector A5082 Angle Head Reaction Bar
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LA5TP Angle Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:5/8” Square Drive (LA5-011, -009, -006; LRA5-008, -007 Models) 3/4” Square Drive (LA5-006 Model)
A40LA5TPJ Angle Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:5/8” Square Drive (-011, -009 Models) 3/4” Square Drive (-006 Model)
A40LA5TPJ
A40LA5TP
www.StanleyAssembly.com 8 RevB1299
A40LA3H HOLD AND DRIVE ANGLE NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A40LA3HTPM-5 475 34 - 68 25 - 50
A40LA3HTPM-4 320 51 - 102 38 - 75 26 1.03 117 4.62 455 17.9 4 8.8
A40LA3HTPM-3 255 63 - 125 47 - 93
A40LA3HTPM-2 200 78 - 155 58 - 115
A40LA3HTPJM-5 475 34 - 68 25 - 50
A40LA3HTPJM-4 320 51 - 102 38 - 75 26 1.03 117 4.62 480 18.9 4.2 9.3
A40LA3HTPJM-3 255 63 - 125 47 - 93
A40LA3HTPJM-2 200 78 - 155 58 - 115
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
A40LA3HTPM/TPJM ADDITIONAL COST OPTIONS:
See Options & Accessories for A40LA3H Head, Holder and Drive Socket Options J4354 Swivel Bail H1141 Base Mount Bracket
REACTION BARSA4591 Angle Head Reaction Bar (40A3/A4)
N4434 Angle Head Split Reaction Bar (40A3/A4)
S7674 Exhaust Collector External Reaction Transducer (Add ‘X’ to MODEL eg: A40LA3HTPM-5X)
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10”; Example: A40LA3HTPM-5-4E
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LA3HTPM Hold and Drive Angle Nutrunners hold the bolt while the nut is tightened.
STANDARD CONFIGURATION:1” Holder Travel
A40LA3HTPJM Hold and Drive Angle Nutrunners hold the bolt while the nut is tightened.
STANDARD CONFIGURATION:1” Holder Travel
A40LA3HTPJM
A40LA3HTPM
www.StanleyAssembly.com 9 RevB1299
A40LB STRAIGHT NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in
NON-REVERSIBLE
A40LBTP-15 1440 10.5- 21 7.5 - 15 302 11.9 2.1 4.6
A40LBTP-9 910 18 - 36 13 - 26
A40LBTP-6 600 27 - 53 20 - 39
A40LBTP-5 480 33 - 66 25 - 49 328 12.9 2.2 5
A40LBTP-4 360 45 - 89 33 - 66
A40LBTPJ-15 1440 10 - 20 7.5 - 15
A40LBTPJ-6 600 27 - 53 20 - 40 25 1.0
A40LBTPJ-5 480 33 - 65 25 - 50 353 13.9 2.4 6
A40LBTPJ-4 360 45 - 90 33 - 65
REVERSIBLE
A40LRBTP-7 500 14 - 28 10.5 - 21
A40LRBTP-5 330 22 - 43 16 - 32 25 1.0 353 13.9 2.4 5.3
A40LRBTP-4 270 27 - 53 20 - 39
A40LRBTP-3 200 36 - 72 27 - 53
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
F4016 Swivel Bail A4072 Steel Torque Bar H1166 Base Mount Bracket
See Options & Accessories for A40_B Spindle Options
External Reaction Transducer (Add ‘X’ to MODEL eg: A40LBTPJ-15X)
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Correct torque bar placement eliminates torque reaction and reduces operator fatigue
¶ Torque bar can be cut and bent to suit the application
¶ Quiet motor maintains low noise level
¶ Easy to use twist reverse
A40LBTP Straight Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:3/8” Square Drive (LB-15, -9, -6; LRB-7, -5, -4 Models) 1/2” Square Drive (LB-5, -4; LRB-3 Models) A4517 Aluminum Torque Bar
A40LBTPJ Straight Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:3/8” Square Drive (-15, -6 Models) 1/2” Square Drive (-5, -4 Models) A4517 Aluminum Torque Bar
A40LBTP
A40LBTPJ
www.StanleyAssembly.com 10 RevB1299
A40LB3 STRAIGHT NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in
NON-REVERSIBLE
A40LB3TP-2 210 85 - 170 63 - 125
A40LB3TP-015 140 114 - 228 84 - 168 35 1.38 409 16.1 5.9 13
A40LB3TP-009 90 177 - 353 130 - 260
A40LB3TPJ-015 130 105 - 210 78 - 155 35 1.38 434 17.1 6 13.25
A40LB3TPJ-009 85 163 - 325 120 - 240
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
F4015 Swivel Bail J4027 Slave 3/4” Reaction Drive Torque Bar [57 – 152 mm (2.2 – 6 in) Adjustment Centers] J4028 Slave 3/4” Reaction Drive Torque Bar With Handle [57 – 152 mm (2.2 – 6 in) Adjustment Centers]
N4580 Slave 3/4” Reaction Drive Torque Bar (Aluminum) With Handle [57 – 152 mm (2.2 – 6 in) Adjustment Centers]
H1140 Base Mount Bracket
See Options & Accessories for A40_LB3
SPINDLE OPTIONS: (NO EXTERNAL TRANSDUCER)B4493 3/4" Square Drive X 3-3/4" Ext. Output Spindle N4351 3/4” Square Drive X 7-1/2” Ext. Output Spindle
External Reaction Transducer (Add ‘X’ to MODEL eg: A40LB3TP-015X)
SPINDLE OPTION: (WITH EXTERNAL TRANSDUCER)N4351 3/4” Square Drive X 3-3/4” Ext. Output Spindle
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TP” shut-off mechanism gives reliable performance
¶ "J" Torque Regulating Valve adjusts torque level at the tool and isolates variations in supply pressure
Ergonomics Improve Operator Interface
¶ Correct torque bar placement eliminates torque reaction and reduces operator fatigue
¶ Torque bar can be cut and bent to suit the application
¶ Quiet motor maintains low noise level
A40LB3TP Straight Nutrunners give good torque control with “TP” pneumatic shut-offSTANDARD CONFIGURATION:3/4” Square Drive B4487 Steel Torque Bar
A40LB3TPJ Straight Nutrunners give good torque control and “J” valve torque level adjustment at the tool.STANDARD CONFIGURATION:3/4” Square Drive B4487 Steel Torque Bar
A40LB3TP
A40LB3TPJ
www.StanleyAssembly.com 11 RevD0702
F30 TUBENUT & CROWFOOT NUTRUNNERS WITH AIR ACTUATED SHUT-OFF
Air Shut-Off Control Improves Precision
¶ Air shut-off minimizes the effect of operator technique
¶ Simple, air actuated “TA” shut-off mechanism gives reliable performance
¶ Open ended crowfoot head uses rugged gear design for reliable performance and durability
Ergonomics Improve Operator Interface
¶ Fast shut-off lowers torque reaction impulse
¶ Quiet motor maintains low noise level
¶ Reversing the tool after tightening stops the socket in the open position.
8mm MAXIMUM TUBE SIZE 13mm MAXIMUM HEX SIZE
F30L147 Includes One (1) Socket from Section K F30L211 Includes One (1) Socket from Section K
RATED
SPEED
TORQUE
RANGE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F30 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F30L147ATA-45 450 6.5 - 13 5 - 10
F30L147ATA-33 300 9 - 18 6.5 - 13 8.6 0.34 14 0.54 356 14 2.1 4.6
F30L211TA-76 760 4 - 7.7 3 - 5.7
F30L211TA-57 570 5 - 10 3.7 - 7.4 13 0.52 14 0.54 348 13.7 2.1 4.6
F30L211TA-42 420 7 - 14 5.3 - 10.5
F30L211TA-23 235 12.5 - 25 9.5 - 19
11mm MAX TUBE SIZE 18mm MAX HEX SIZE
13mm MAX TUBE SIZE 24mm MAX HEX SIZE
CROWFOOT13mm MAX HEX SIZE
F30L74 Includes One (1) Socket from Section K F30L264 Includes One (1) Socket F30LR8 Includes One (1) Socket
RATED
SPEED
TORQUE
RANGE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F30 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F30L74ATA-60 600 6.5 - 13 5 - 9.5
F30L74ATA-41 415 9.5 - 19 7 - 14 18.5 0.73 14.5 0.57 384 15.1
F30L74ATA-31 305 12 - 24 9 - 18
F30L264TA-41 415 9.5 - 19 7 - 14
F30L264TA-30 290 9 - 18 6.5 - 13
F30L264TA-17 165 16 - 32 12 - 24 21.3 0.84 18 0.70 373 14.7 2.2 4.8
F30L264TA-12 110 24 - 47 18 - 35
F30LR8TA-24 2400 1.4 - 2.7 1 - 2 284 11.2
F30LR8TA-16 1650 2 - 4 1.5 - 3 12.7 0.5 16 0.64 1.3 2.8
F30LR8TA-9 900 3.5 - 7 2.7 - 5.3 292 11.5
F30LR8TA-5 500 6.4 - 12.7 4.7 - 9.4 305 12 1.5 3.2
Min Hose Size: 3/8” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 10 l/s (20 ft3/m)Note: Performance specifications @ 620 kPa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
A3061 Vertical Bail B3432 Swivel Bail
M3131 Exhaust Collector
www.StanleyAssembly.com 12 RevA1299
W40 RATCHET WRENCHES WITH AIR ACTUATED SHUT-OFF
HAND-HELD PNEUMATIC Max Hex Size: 1” Side Plate: 16 mm (5/8 in) 1-1/4” Side Plate: 19 mm (3/4 in)
20 – 47 Nm (15 – 35 lb ft)
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT; Air Consumption: 20 l/s (40 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“T”
THICKNESS
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
1” SIDE PLATE
W40TP-316 275 10 - 20 7.5 - 15 416 16.37 2.1 4.7
W40TP-216 205 13.5 - 27 10 - 20 13 0.5 14 0.56
W40TP-116 135 20 - 40 15 - 30 441 17.37 2.45 5.4
1-1/4” SIDE PLATE
W40TP-320 250 15 - 30 11 - 22 416 16.37 2.2 4.8
W40TP-220 180 19 - 38 14 - 28 16 0.63 14 0.56
W40TP-120 110 24 - 47 18 - 35 441 17.37 2.5 5.5
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
A4070 Horizontal Bail
F4016 Swivel Bail
“J” Torque Regulating Valve (Add ‘J’ to MODEL eg: W40TPJ-316)
¶ “TP” Shut-off mechanism reduces mean shift to produce virtually consistent torque regardless of joint make-up.
¶ Applied torque easily adjusts with supply pressure regulator
W40TP Ratchet Wrenches tighten nuts and bolts in areas ordinarily accessible only to hand wrenches.
STANDARD CONFIGURATION:(1) Hex Socket (See Options & Accessories)
www.StanleyAssembly.com 13 RevC0503
A32LB & A33LB2 STRAIGHT NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
Adjustable Clutch Control Improves Precision
Fast shut-off minimizes operator effects
Improved durability with virtually no clutch wear
Torque level not affected by supply pressure variations
Ergonomics Improve Operator Interface
Fast shut-off lowers torque reaction impulse
Unique spline allows easy adjustment of throttle lever position without shims
Reversible models have easy to use reverse ring
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: A32Models 1 l/s (20 ft3/m), A33Models 15 l/s (32 ft3/m)
A32LBRATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CENTER
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
NON-REVERSIBLE
A32LBCT-15 1660 5 - 9.5 3.5 - 7
A32LBCT-10 785 7.5 - 15 5.5 - 11 23 0.91 344 13.6 1.55 3.4
A32LBCT-6 710 12 - 23 8.5 - 17
REVERSIBLE
A32LRBCT-13 1450 4.5 - 9 3.3 - 6.5
A32LRBCT-9 710 7 - 13.5 5 - 10 23 0.91 344 13.6 1.55 3.4
A32LRBCT-6 620 11 - 21.5 8 - 16
A32LB ADDITIONAL COST OPTIONS:
A8500 Swivel Bail (2 pc assembly) A8606 Base Mount Bracket “SS” Cycle Start And Stop Pneumatic Control Signals
A8362 Side Exhaust Deflector A8011 Remote Exhaust Hose Adapter
A33LB2 RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CENTER
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
NON-REVERSIBLE
A33LB2CT-8 820 17 - 33 12 - 24
A33LB2CT-6 670 20 - 40 15 - 30 23 0.91 431 17 2.1 4.7
A33LB2CT-4 435 26 - 51 19 - 38
REVERSIBLE
A33LRB2CT-6 650 15 - 30 11 - 22
A33LRB2CT-5 540 18 - 36 14 - 27 23 0.91 431 17 2.1 4.7
A33LRB2CT-3 350 24 - 48 18 - 35
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of rated torque.
A33LB2 ADDITIONAL COST OPTIONS:
A8500 Swivel Bail (2 pc assembly) 1/2 “ Square Drive A4072 Steel Torque Bar H1166 Base Mount Bracket
A8011 Remote Exhaust Hose Adapter A8362 Side Exhaust Deflector
See Options & Accessories for A33LB2 Spindle Options
STANDARD CONFIGURATION3/8” Square Drive A32LB Models: F3698 Aluminum Torque Bar A33LB2 Models: A4517 Aluminum Torque Bar
www.StanleyAssembly.com 14 RevA0399
A32 ANGLE NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
Adjustable Clutch Control Improves Precision
Fast shut-off minimizes operator effects
Improved durability with virtually no clutch wear
Torque level not affected by supply pressure variations
Strong bevel gears improve performance
Ergonomics Improve Operator Interface
Fast shut-off lowers torque reaction impulse
Unique spline allows easy adjustment of throttle lever position without shims
Reversible models have easy to use reverse ring
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 10 l/s (20 ft3/m)
A32LRAARATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
REVERSIBLE
A32LRAACT-11S3 1050 3 - 6 2 - 4.3
A32LRAACT-11S2 1050 4.5 - 9 3.5 - 6.5
A32LRAACT-7S2 700 6 - 12 4.5 - 8.6 13 0.5 34 1.32 325 12.8 1.4 3
A32LRAACT-5S3 525 3 - 6 2 - 4.3
A32LRAACT-5S2 525 6 - 12 4.5 - 8.6
A32LRAACT-5S1 525 7.5 - 15 5.5 - 11
A32L_ARATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A32LA1CT-10 965 7 - 14 5 - 10
A32LA1CT-7 750 10 - 20 7.5 - 15
A32LA1CT-6 600 13 - 25 10 - 19 14 .55 35 1.38 340 13.4 1.55 3.4
A32LA1CT-5 500 15 - 30 11 - 22
A32LA2ACT-4 360 20 - 40 15 - 29 17.5 .69 40 1.56 386 15.2 1.8 4.0
REVERSIBLE
A32LRA1CT-9 900 6.5 - 12.5 5 - 9.5
A32LRA1CT-7 665 8.5 - 17 6.5 - 13
A32LRA1CT-5 525 10 - 19 7 - 14 14 .55 35 1.38 340 13.4 1.55 3.4
A32LRA1CT-4 445 13 - 25 9 - 18
A32LRA2ACT-3 320 19 - 38 14 - 28 17.5 .69 40 1.56 386 15.2 1.8 4.0
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
A32LRAA Models: A8576 Swivel Bail (2 pc assembly) Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”; Example: A32LRAACT-11S3-4E
A32L_A1/A2A Models: A8500 Swivel Bail (2 pc assembly) Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8’, 10”; Example: A32LRA1CT-9-4E
A8362 Side Exhaust Deflector A8011 Remote Exhaust Hose Adapter
See Options & Accessories for A3_LRAA and A3_L_A2A Head Assembly and Flush Socket Options
“SS” Cycle Start And Stop Pneumatic Control Signals
STANDARD CONFIGURATION:3/8” Square Drive
www.StanleyAssembly.com 15 RevC1299
A33 ANGLE NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
Adjustable Clutch Control Improves Precision
Fast shut-off minimizes operator effects
Improved durability with virtually no clutch wear
Torque level not affected by supply pressure variations
Strong bevel gears improve performance
Ergonomics Improve Operator Interface
Fast shut-off lowers torque reaction impulse
Unique spline allows easy adjustment of throttle lever position without shims
Reversible models have easy to use reverse ring
Min Hose Size: 3/8” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 15 l/s (32 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A33LA1ACT-8 825 15 - 30 11 - 22 14 .55 35 1.38 417 16.4 2 4.4
A33LA2ACT-6 600 21 - 42 16 - 31
A33LA2ACT-5 500 25 - 50 19 - 37 17.5 .69 40 1.56 432 17 2.1 4.7
A33LA2ACT-4 435 30 - 59 22 - 44
A33LA3CT-3 335 38 - 75 28 - 55 22 .87 50 1.95 457 18 2.7 5.9
A33LA3CT-2 250 45 - 90 33 - 66
REVERSIBLE
A33LRA1ACT-7 700 13 - 26 10 - 19 14 .55 35 1.38 417 16.4 2 4.4
A33LRA2ACT-5 510 18 - 36 14 - 27
A33LRA2ACT-4 400 23 - 46 17 - 34 17.5 .69 40 1.56 432 17 2.1 4.7
A33LRA2ACT-3 335 28 - 55 21 - 41
A33LRA3CT-2 270 34 - 68 25 - 50 22 .87 50 1.95 457 18 2.7 5.9
A33LRA3CT-1 200 43 - 85 32 - 63
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm Lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A33LA4CT-015 150 75 - 150 55 - 110 26 1.03 60 2.35 488 19.2 3.4 7.5
REVERSIBLE
A33LRA4CT-012 120 68 - 135 50 - 100 26 1.03 60 2.35 488 19.2 3.4 7.5
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of rated torque.
ADDITIONAL COST OPTIONS:
A8500 Swivel Bail (2 pc assembly)
H1203 Base Mount Bracket (33A3) A4590 Angle Head Reaction Bar (33A3) N4433 Angle Head Split Reaction Bar (33A3)
H1141 Base Mount Bracket (33A4) A4591 Angle Head Reaction Bar (33A4) N4434 Angle Head Split Reaction Bar (33A4)
A8011 Remote Exhaust Hose Adapter A8362 Side Exhaust Deflector
See Options & Accessories for A33L_A3, A3_L_A2A, and A33L_A4 Head Assembly and Flush Socket Options
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10” Example: A33LA1ACT-8-4E
“SS” Cycle Start And Stop Pneumatic Control Signals
STANDARD CONFIGURATION:A2A Models – 3/8” Sq. Drive; A3, A4 Models – 1/2” Sq. Drive
www.StanleyAssembly.com 16 RevA0399
A33 HOLD AND DRIVE ANGLE NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
L
H
R
Min Hose Size: 3/8” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 15 l/s (32 ft3/m)
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
*HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A33LA3HCT-6 600 18 - 35 13 - 26
A33LA3HCT-4 395 30 - 60 22 - 44
A33LA3HCT-3 320 36 - 71 26 - 52 22 .87 118 4.65 460 18.1 3 6.6
A33LA3HCT-2 235 43 - 85 32 - 63
REVERSIBLE
A33LRA3HCT-5 500 15 - 30 11 - 22
A33LRA3HCT-3 310 28 - 55 21 - 41
A33LRA3HCT-2 255 33 - 65 24 - 48 22 .87 118 4.65 460 18.1 3 6.6
A33LRA3HCT-1 190 40 - 80 30 - 59
A33L_A3H ADDITIONAL COST OPTIONS:
See Options & Accessories for A33L_A3H Head, Holder and Drive Socket Options
A8500 Swivel Bail (2 pc assembly) H1203 Base Mount Bracket A4590 Angle Head Reaction Bar N4433 Angle Head Split Reaction Bar
A8362 Side Exhaust Deflector A8011 Remote Exhaust Hose Adapter
“SS” Cycle Start And Stop Pneumatic Control Signals
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10”; Example: A33LA3HCT-6-4E
RATED
SPEED
TORQUE
RANGE
“R”
SIDE TO CTR
“H”
*HEIGHT
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in mm in kg lb
NON-REVERSIBLE
A33LA4HCT-015 150 68 - 135 50 - 100 26 1.03 117 4.62 460 18.1 3.9 8.5
REVERSIBLE
A33LRA4HCT-012 120 60 - 120 44 - 88 26 1.03 117 4.62 460 18.1 3.9 8.5
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque. * For the Tang Holder Option, add 41.9 mm (1.65 in) to the “H” dimension.
A33L_A4H ADDITIONAL COST OPTIONS:
See Options & Accessories for A33L_A4H Head, Holder and Drive Socket Options
A8500 Swivel Bail (2 pc assembly) H1141 Base Mount Bracket A4591 Angle Head Reaction Bar N4434 Angle Head Split Reaction Bar
A8362 Side Exhaust Deflector A8011 Remote Exhaust Hose Adapter
“SS” Cycle Start And Stop Pneumatic Control Signals
Gear Case Extension Options: Add - ##E to Model Number ## = 4”, 6”, 8”, 10”; Example: A33LA4HCT-015-4E
Hold and Drive Angle Nutrunners hold the bolt while the nut is tightened.
STANDARD CONFIGURATION:1” Holder Travel
www.StanleyAssembly.com 17 RevE0504
F32 & F33 CROWFOOT NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
Adjustable Clutch Control Improves Precision
Fast shut-off minimizes operator effects
Improved durability with virtually no clutch wear
Torque level not affected by supply pressure variations
Ergonomics Improve Operator Interface
Fast shut-off lowers torque reaction impulse
Unique spline allows easy adjustment of throttle lever position without shims
Reversible models have easy to use reverse ring
13mm MAXIMUM HEX SIZE Includes One (1) Socket from Section K
F32L8 F32/33L69ACT F33L246ACT F33L13ACT
RATED
SPEED
RATED
TORQUE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F32 MODEL RPM Nm lb ft mm In mm in mm in kg lb
F32L8ACT-6S3 625 2 - 4 1.5 - 2.7
F32L8ACT-6S2 625 4 - 8 3 - 5.8 386 15.2 1.2 3.6
F32L8ACT-6S1 625 5.5 - 11 4 - 7.7
F32L8CT-7 740 7 - 14 5 - 10 12.7 0.5 16 0.64 387 15.25 1.8 4.0
F32LR8ACT-5S3 545 2 - 4 1.5 - 2.7
F32LR8ACT-5S2 545 4 - 8 3 - 5.8 386 15.2 1.2 3.6
F32LR8ACT-5S1 545 5.5 - 11 4 - 7.7
F32LR8CT-5 475 7.5 - 15 6 - 11.4 387 15.25 1.8 4.0
F32L69ACT-6 600 8.5 - 17 6.5 - 12.5
F32L69ACT-5 400 11 - 21 8 - 15.5
F32LR69ACT-7 650 6 - 12 4.5 - 9 13.5 0.53 16 0.63 490 19.3 2.1 4.7
F32LR69ACT-4 425 8.5 - 17 6.5 - 12.5
F32LR69ACT-3 365 11 - 22 8 - 16
RATED
SPEED
RATED
TORQUE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F33 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F33L69ACT-6 675 13 - 26 9.5 - 19
F33L69ACT-5 560 16 - 31 12 - 23 13.5 0.53 16 0.63 538 21.2 2.4 5.4
F33LR69ACT-6 680 9 - 18 6.5 - 13
F33LR69ACT-4 450 14 - 28 11 - 21
F33L246ACT-6 600 14 - 27 10 - 20
F33L246ACT-5 500 17 - 33 12 - 24
F33L246ACT-4 435 19 - 38 14 - 28
F33LR246ACT-6 610 9.5 - 19 7 - 14 15.7 0.62 20.5 0.81 500 19.7 2.5 5.5
F33LR246ACT-5 510 12 - 23 8.5 - 17
F33LR246ACT-4 400 15 - 30 11 - 22
F33LR246ACT-3 335 18 - 36 13 - 26
F33L13ACT-6 675 12 - 24 9 - 18
F33L13ACT-5 560 15 - 29 11 - 22 13.5 0.53 20.5 0.8 500 19.7 2.5 5.5
F33LR13ACT-5 575 10 - 20 7.5 - 15
F33LR13ACT-4 450 14 - 27 10 - 20
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: A32Models 1 l/s (20 ft3/m), A33Models 15 l/s (32 ft3/m)Note: Performance specifications @ 620 kPa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST CROWFOOT OPTIONS:
A8500 Swivel Bail (2 pc assembly)
A8576 Swivel Bail F32L_8ACT-_S_ Models Only A8011 Remote Exhaust Hose Adapter
A8362 Side Exhaust Deflector “SS” cycle start and stop pneumatic control signals
www.StanleyAssembly.com 18 RevD0702
F32 & F33 CROWFOOT NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
19mm MAXIMUM HEX SIZE Includes One (1) Socket from Section K
F33L29A F33L35A F33L31 F33L10
RATED
SPEED
TORQUE
RANGE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F33 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F33L29ACT-6 600 14 - 27 10 - 20
F33L29ACT-5 500 17 - 33 12 - 24 20.5 0.81 14 0.55 498 19.6 2.5 5.4
F33LR29ACT-6 610 9.5 - 19 7 - 14
F33LR29ACT-4 400 15 - 30 11 - 22
F33L35ACT-6 600 14 - 27 10 - 20
F33L35ACT-5 500 17 - 33 12 - 24 20.5 0.81 14 0.55 528 20.8 3.0 6.5
F33LR35ACT-6 610 9.5 - 19 7 - 14
F33LR35ACT-4 400 15 - 30 11 - 22
F33L31CT-3 335 24 - 48 18 - 36
F33L31CT-2 250 33 - 65 24 - 48 20.5 0.81 28 1.1 522 20.6 3.4 7.5
F33LR31CT-2 270 22 - 44 16 - 32
F33LR31CT-1 200 30 - 60 22 - 44
F33L10CT-3 335 24 - 48 18 - 36
F33L10CT-2 250 33 - 65 24 - 48 20.5 0.81 28 1.1 554 21.8 3.6 7.9
F33LR10CT-2 270 22 - 44 16 - 32
F33LR10CT-1 200 30 - 60 22 - 44
19mm MAXIMUM HEX SIZE Includes One (1) Socket from Section K
F33L7A F33L16A
RATED
SPEED
TORQUE
RANGE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F33 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F33L7ACT-6 600 14 - 27 10 - 20
F33L7ACT-4 435 20 - 39 15 - 29 21 0.81 21 0.84 498 19.6 2.8 6.1
F33LR7ACT-5 510 12 - 24 9 - 18
F33LR7ACT-3 335 18 - 36 14 - 27
F33L16ACT-6 600 14 - 27 10 - 20
F33L16ACT-4 435 20 - 39 15 - 29 20.5 0.81 21 0.84 528 20.8 3.0 6.5
F33LR16ACT-5 510 12 - 24 9 - 18
F33LR16ACT-3 335 18 - 36 14 - 27
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: A32Models 1 l/s (20 ft3/m), A33Models 15 l/s (32 ft3/m)Note: Performance specifications @ 620 kPa (90 psi). Output torque adjusts to 50% of maximum rated torque.
www.StanleyAssembly.com 19 RevD0702
F32 & F33 TUBENUT NUTRUNNERS WITH “CT” CLUTCH ACTUATED SHUT-OFF
Adjustable Clutch Control Improves Precision
Improved durability with virtually no clutch wear
Rugged gear design gives reliable performance and durability
Ergonomics Improve Operator Interface
Latch controls reversing the tool after tightening to stop the socket in the open position
8mm MAXIMUM TUBE SIZE 13mm MAXIMUM HEX SIZE
F32/33L147 Includes One (1) Socket from Section K F32L211 Includes One (1) Socket from Section K
RATED
SPEED
TORQUE
RANGE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F32 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F32L147ACT-7 700 5.5 - 11 4 - 8 8.6 0.34 14 0.54 467 18.38 2.2 4.9
F32L147ACT-4 450 8.3 - 16.5 6 - 12 8.6 0.34 14 0.54 467 18.38 2.2 4.9
F32L211CT-5 520 7 - 13.5 5 - 10 13 0.52 14 0.54 459 18.07 2.3 5.0
F32L211CT-3 350 10 - 20 7.3 - 14.5 13 0.52 14 0.54 459 18.07 2.3 5.0
F33 MODEL RPM Nm lb ft Mm in mm in mm in kg lb
F33L147ACT-4 400 10.5 - 21 8 - 15.5 8.6 0.34 14 0.54 505 19.9 2.5 5.6
11mm MAX TUBE SIZE 18mm MAX HEX SIZE
13mm MAX TUBE SIZE 24mm MAX HEX SIZE
19mm MAX TUBE SIZE 27mm MAX HEX SIZE
F32/33L74 Incl. One (1) Standard Hex Socket F32L264 Incl.(1) Standard Hex Soc F32/33L99 Incl. (1) Standard Hex Soc
RATED
SPEED
TORQUE
RANGE
“R”
NOSE RADIUS
“T”
THICKNESS
“L”
LENGTH WEIGHT
F32 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F32L74ACT-5 515 7.5 - 15 5.5 - 11 18.5 0.73 14.5 0.57 495 19.5 2.4 5.3
F32L74ACT-3 340 10.5 - 21 8 - 15.5 18.5 0.73 14.5 0.57 495 19.5 2.4 5.3
F32L264CT-3 300 11.5 - 23 8.5 - 17 21.3 0.84 18 0.70 485 19.1 2.4 5.2
F32L264CT-2 235 14.5 - 29 10.5 - 21 21.3 0.84 18 0.70 485 19.1 2.4 5.2
F32L264CT-1 155 22 - 44 16 - 32 21.3 0.84 18 0.70 485 19.1 2.4 5.2
F32L99CT-24 240 15 - 30 11 - 22 26.4 1.04 18.5 0.77 545 21.44 3.5 7.6
F32L99CT-18 180 20 - 40 15 - 29.5 26.4 1.04 18.5 0.77 545 21.44 3.5 7.6
F33 MODEL RPM Nm lb ft mm in mm in mm in kg lb
F33L74ACT-29 290 15 - 30 11 - 22 18.5 0.73 14.5 0.57 533 21.0 2.7 6.0
F33L99CT-16 160 28 - 56 21 - 41 26.4 1.04 18.5 0.77 583 22.93 3.8 8.3
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: A32Models 1 l/s (20 ft3/m), A33Models 15 l/s (32 ft3/m)Note: Performance specifications @ 620 kPa (90 psi). Output torque adjusts to 70% of maximum rated torque.
ADDITIONAL COST TUBENUT OPTIONS:
A8500 Swivel Bail (2 pc assembly) A8011 Remote Exhaust Hose Adapter
A8362 Side Exhaust Deflector “SS” cycle start and stop pneumatic control signals
L
R
A3RT
R
LA2RT
PE STRAIGHT SCREWDRIVERS with Clutch Actuated Shut-offPneumatic, Reversible, Lever and Push-To-Start Models
R
L
A2LRT
R
LA3LRT
Lever models work best for various tool orientations.
Push to start models work best in highly repetitive bench or automated assembly stations.
Additional Cost Options:Lever models with push to startError proofing signalsTorque Arms Automated Assembly Stations
STANDARD CONFIGURATION:1/4" Hex Quick Change ChuckSuspension BailClutch Adjusting Tool andAdditional Clutch Springs1/4" NPT Air Inlet (1/4"ISO Option)
0.5– 4 Nm (4.4 – 35 lb in) 2.5 – 10 Nm (22 – 89 lb in)
2.5 – 10 Nm (22 – 89 lb in)
P PRODUCTIVITY
E ERGONOMICS
Note:Performance Specifications @ 620 Pa (90 psi), Minimum Hose Size: 5/16" ID
Air Consumption: A2 - 12cfm ( 6 l/sec)A3 - 17cfm ( 8 l/sec)
0.5– 4 Nm (4.4 – 35 lb in)
Adjustable Clutch for Torque Control Improves Precision� Fast shut-off minimizes operator effects.� Durable clutch maintains torque level� Torque level not affected by supply pressure variations
ERGONOMICS enhance PRODUCTIVITY� Low noise level <77 dBA (<70 dBA/piped away exhaust)� Non-slip grip requires less gripping force and insulates the hand from the tool handle� Fast torque shut-off reduces torque reaction impulse.
PRODUCTIVITY� Right or left hand operation allows single tool use by different operators.� Integral 1/4" quick-change chuck with minimal bit run-out extends bit life
PE0403
RATED
SPEED
TORQUE
Nm
TORQUE
lb in
“R”
SIDE TO
CENTER
“L”
LENGTH WEIGHT
MODEL RPM Min Max Min Max mm in mm in kg lb
A2LRT20-2 2000 0.5 1.5 4.4 13
A2LRT13-2 1300 0.5 2 4.4 18 16 0.63 234 9.2 0.65 1.4
A2LRT9-3 900 0.5 3 4.4 27
A2LRT6-4 600 0.5 4 4.4 35
A3LRT15-5 1500 2.5 5 22 44
A3LRT10-8 1000 2.5 8 22 71 20 0.8 245 9.6 0.9 1.9
A3LRT5-10 500 2.5 10 22 89
RATED
SPEED
TORQUE
Nm
TORQUE
lb in
“R”
SIDE TO
CENTER
“L”
LENGTH WEIGHT
MODEL RPM Min Max Min Max mm in mm in kg lb
A2RT20-2 2000 0.5 1.5 4.4 13
A2RT13-2 1300 0.5 2 4.4 18 16 0.63 218 8.6 0.6 1.3
A2RT9-3 900 0.5 3 4.4 27
A2RT6-4 600 0.5 4 4.4 35
A3RT15-5 1500 2.5 5 22 44
A3RT10-8 1000 2.5 8 22 71 20 0.8 245 9.6 0.9 1.9
A3RT5-10 500 2.5 10 22 89
20www.StanleyAssembly.com
PE Pneumatic, Reversible
PISTOL GRIP SCREWDRIVERS with Clutch Actuated Shut-off
Underslung pistol has better balance where little or no operator push is needed.
L
R
H
H
L
R
Standard pistol for installing self-drilling or self-tapping fasteners where axial push is required.
PE Reversible
ANGLE SCREWDRIVERS with Clutch Actuated Shut-offPneumatic,
L
R
H
STANDARD CONFIGURATION:1/4" Square Drive (1/4" Female Hex Option)Suspension BailClutch Adjusting Tool1/4" NPT Air Inlet (1/4"ISO Option)
0.5 – 10 Nm (4.4 – 89 lb in)
0.8 – 4.5 Nm (7.1 – 40 lb in)
STANDARD CONFIGURATION:1/4" Hex Quick Change ChuckSuspension BailClutch Adjusting Tool1/4" NPT Air Inlet (1/4"ISO Option)
P PRODUCTIVITY
E ERGONOMICS
Note:Performance Specifications @ 620 Pa (90 psi), Minimum Hose Size: 5/16" ID
Air Consumption: A2 - 12cfm ( 6 l/sec) A3 - 17cfm ( 8 l/sec)
P PRODUCTIVITY
E ERGONOMICS
A25PRT A25URT
A2LRAT
Elastomeric grips require less force and insulate the hand from the tool
RATED SPEED
TORQUE Nm
TORQUE lb in
“R” SIDE TO CENTER
“L” LENGTH
“H” HEIGHT
WEIGHT
MODEL RPM Min Max Min Max mm in mm in mm in lb kg A2LRAT10-3 1300 0.8 2.5 7.1 22 A2LRAT10-4 900 1 3.5 8.8 31 5 0.2 298 11.7 29 1.1 0.7 1.5 A2LRAT10-5 600 1 4.5 8.8 40
21www.StanleyAssembly.com
MODEL RATED SPEED
TORQUE Nm
TORQUE lb in
“R” SIDE TO CENTER
“L” LENGTH
“H” HEIGHT
WEIGHT
STANDARD RPM Min Max Min Max mm in mm in mm in lb Kg A25PRT20-2 2000 0.6 2.0 5.3 18 A25PRT14-3 1400 0.6 3.3 5.3 29 18.5 0.73 200 7.9 155 6.1 1.6 .72 A25PRT10-5 950 0.6 4.5 5.3 40 A25PRT7-5 650 0.6 4.5 5.3 40
A3PRT15-5 1500 2.5 5 22 44 A3PRT10-8 1000 2.5 8 22 71 19 0.75 245 9.6 155 6.1 1.1 2.4 A3PRT5-10 500 2.5 10 22 89 UNDERSLUNG RPM Min Max Min Max mm in mm in mm in lb Kg A25URT20-2 2000 0.6 2.0 5.3 18 A25URT14-3 1400 0.6 3.3 5.3 29 15.5 0.61 168 6.6 155 6.1 1.5 .7 A25URT10-5 950 0.6 4.5 5.3 40 A25URT7-5 650 0.6 4.5 5.3 40
A3URT15-5 1500 2.5 5 22 44 A3URT10-8 1000 2.5 8 22 71 19 0.75 210 8.3 160 6.3 1.1 2.4 A3URT5-10 500 2.5 10 22 89
Rev. 0704
www.StanleyAssembly.com 22 RevC0600
A30MF FLANGED STRAIGHT MOTORS WITH TORQUE REGULATING VALVE
1610 – 465 RPM 8 - 28.5 Nm (6 – 21 lb ft)
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 10 l/s (20 ft3/m) Oil & Pilot Start Port: 1/8” NPT
RATEDSPEED
TORQUERANGE
"R"SIDE TO CENTER
"L"LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
STALL
A30MFSJ-9 900 7.3 - 14.5 5.5 11
A30MFSJ-6 620 10.8 - 21.5 8 - 16 21 0.83 337 13.3 1.6 3.5
A30MFSJ-5 465 14.3 - 28.5 10.5 - 21 Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
M3184 Heavy Duty Spindle Retraction Spring (19mm, 3/4” Travel) Extended Spindle Length 51 mm (2") Travel Retractable Spindle Exhaust Collectors (Must Be Specified With Request) External Reaction Transducer (Add ‘X’ to MODEL eg: A30MFSJ-16X)
SPINDLE OPTIONS [19mm (3/4”) Travel]:S3362 3/8" Square Drive X 1 5/32" Ext Spindle M3243 3/8" Square Drive X 1.478" Ext Spindle M3090 3/8" Square Drive X 2" Ext Spindle S3363 3/8" Square Drive X 2 3/8" Ext Spindle M3239 3/8" Square Drive X 3" Ext Spindle M3223 3/8" Square Drive X 4" Ext Spindle S3486 3/8" Square Drive X 4-1/16" Ext Spindle M3224 3/8" Square Drive X 6" Ext Spindle S3626 3/8" Square Drive X 7 3/8" Ext Spindle M3216 3/8" Square Drive X 8" Ext Spindle M3118 3/8"-24 Threaded Spindle M3227 3/8"-24 X 3/4" Ext Threaded Spindle
Stall Motors Have Remote Pilot Start And Stall Air Signals For Fixtured Applications
"J" Torque Regulating Valve adjusts torque level at the motor and isolates variations in supply pressure
Durable planetary gearing gives reliable performance
A30MFSJ Stall Motors give uniform fastening in multiple spindle applications with joint relaxation torque recovery.STANDARD CONFIGURATION:
Flange Mount
Retractable Spindle 19 mm (3/4") travel
3/8" Square Drive
Remote Start Valve
Stall Signal
www.StanleyAssembly.com 23 RevC0600
A40MF FLANGED STRAIGHT MOTORS WITH TORQUE REGULATING VALVE
860 – 340 RPM 40 – 95 Nm (30 – 70 lb ft)
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT; Air Consumption: 20 l/s (40 ft3/m) Oil & Pilot Start Port: 1/8” NPT
RATEDSPEED
TORQUERANGE
"R"SIDE TO CENTER
"L"LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
STALL
A40MFSJ-10 860 20 - 40 15 - 30
A40MFSJ-6 570 28 - 55 20 - 40 25 1 376 14.8 2.4 5.3
A40MFSJ-5 465 38 - 75 28 - 55
A40MFSJ-4 340 48 - 95 35 - 70
TORQUE SHUTOFF
A40MFTPSJ-10 860 20 - 40 15 - 30
A40MFTPSJ-6 570 28 - 55 20 - 40 25 1 376 14.8 2.4 5.3
A40MFTPSJ-5 465 38 - 75 28 - 55
A40MFTPSJ-4 340 48 - 95 35 - 70
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
M4126 Heavy Duty Spindle Retraction Spring (19mm, 3/4” Travel)25 mm (1"), 51 mm (2") Travel Retractable Spindles Non-Retractable Spindles See Options & Accessories for A40MF Retractable Spindle Options
Exhaust Collectors (Must Be Specified With Request) External Reaction Transducer (Add ‘X’ to MODEL eg: A40MFSJ-10X)
Stall Or Torque Shut-Off Motors Have Remote Pilot Start And Cycle Complete Air Signals For Fixtured Applications
"J" Torque Regulating Valve adjusts torque level at the motor and isolates variations in supply pressure
Durable planetary gearing gives reliable performance
A40MFSJ Stall Motors give uniform fastening in multiple spindle applications with joint relaxation torque recovery.
A40MFTPSJ Torque Shut-Off Motor with “TP” valve reduces torque level variations caused by joint variability
STANDARD CONFIGURATION:
Flange Mount
Retractable Spindle 19 mm (3/4") travel
1/2" Square Drive
Remote Start Valve
Stall Signal (SJ)
Running and Shut Off Signals (TPSJ)
www.StanleyAssembly.com 24 RevC1299
A40MF2 FLANGED STRAIGHT MOTORS WITH TORQUE REGULATING VALVE
265 – 135 RPM 120 – 245 Nm (90 – 180 lb ft)
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT; Air Consumption: 20 l/s (40 ft3/m) Oil & Pilot Start Port: 1/8” NPT
RATEDSPEED
RATEDTORQUE
"R"SIDE TO CENTER
"L"LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
STALL
A40MF2SJ-2 200 83 - 165 60 - 120 29 1.13 512 20.15 4.1 9.1
A40MF2SJ-015 135 123 - 245 90 - 180
TORQUE SHUTOFF
A40MF2TPSJ-2 200 83 - 165 60 - 120 29 1.13 512 20.15 4.1 9.1
A40MF2TPSJ-015 135 123 - 245 90 - 180
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
M5142 Heavy Duty Spindle Retraction Spring (19mm, 3/4” Travel) M3338 Heavy Duty Spindle Retraction Spring (51mm, 2” Travel) 51 mm (2"), 76 mm (3") Travel Retractable Spindles Non-Retractable Spindles See Options & Accessories for A40MF2 Spindle Options
Exhaust Collectors (Must Be Specified With Request) External Reaction Transducer (Add ‘X’ to MODEL eg: A40MF2SJ-3X)
Stall Or Torque Shut-Off Motors Have Remote Pilot Start And Cycle Complete Air Signals For Fixtured Applications
"J" Torque Regulating Valve adjusts torque level at the motor and isolates variations in supply pressure
Durable planetary gearing gives reliable performance
A40MF2SJ Stall Motors give uniform fastening in multiple spindle applications with joint relaxation torque recovery.
A40MF2TPSJ Torque Shutoff Motor with “TP” valve reduces torque level variations caused by joint variability
STANDARD CONFIGURATION:
Flange Mount
Retractable Spindle 19 mm (3/4") travel
5/8" Square Drive
Remote Start Valve
Stall Signal (SJ)
Running and Shut Off Signals (TPSJ)
www.StanleyAssembly.com 25 RevB1099
A40MFA2 FLANGED STRAIGHT MOTORS WITH TORQUE REGULATING VALVE
500 – 250 RPM 72 – 130 Nm (53 – 95 lb ft)
Min Hose Size: 1/2” ID, Air Inlet 3/8” NPT; Air Consumption: 20 l/s (40 ft3/m) Oil & Pilot Start Port: 1/8” NPT
RATEDSPEED
TORQUERANGE
"R"SIDE TO CENTER
"L"LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
STALL
A40MFA2SJ-5 500 36 - 72 27 - 53
A40MFA2SJ-4 310 50 - 100 38 - 75 25 1 376 14.8 3.3 7.2
A40MFA2SJ-3 250 65 - 130 48 - 95
TORQUE SHUTOFF
A40MFA2TPSJ-5 500 36 - 72 27 - 53
A40MFA2TPSJ-4 310 50 - 100 38 - 75 25 1 376 14.8 3.3 7.2
A40MFA2TPSJ-3 250 65 - 130 48 - 95 Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of maximum rated torque.
ADDITIONAL COST OPTIONS:
M4800 Heavy Duty Spindle Retraction Spring (19mm, 3/4” Travel)
Non-Retractable SpindlesHEAD OPTIONSM4309 1/2" Square Drive X 2” Ext Retractable Spindle M4491 1/2" Square Drive Wobble Non-Retractable SpindleM4875 1/2"-20 Female Threaded Spindle
Exhaust Collectors (Must Be Specified With Request) External Reaction Transducer (Add ‘X’ to MODEL eg: A40MFA2SJ-5X)
SPINDLE OPTIONM4466 1/2" Square Drive X 6” Ext Retractable Spindle
Stall Or Torque Shut-Off Motors Have Remote Pilot Start And Cycle Complete Air Signals For Fixtured Applications
"J" Torque Regulating Valve adjusts torque level at the motor and isolates variations in supply pressure
Durable planetary gearing gives reliable performance
A40MFA2SJ Stall Motors give uniform fastening in multiple spindle applications with joint relaxation torque recovery. A40MFA2TPSJ Torque Shut-Off Motor with “TP” valve reduces torque level variations caused by joint variability STANDARD CONFIGURATION:
Flange Mount
Retractable Spindle 19 mm (3/4") travel
1/2" Square Drive
Remote Start Valve
Stall Signal (SJ)
Running and Shut Off Signals (TPSJ)
www.StanleyAssembly.com 26 RevC0702
A32MF FLANGED STRAIGHT MOTORS WITH “CT” CLUTCH ACTUATED SHUT-OFF
1575 – 540 RPM 3.5 - 27 Nm (2.6 - 20 lb ft)
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 10 l/s (20 ft3/m) Remote Start: 1/8” NPT
RATEDSPEED
TORQUERANGE
“R”SIDE TO CENTER
“L”
LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
A32MFCTSS-11S3 1050 1.8 - 3.5 1.3 - 2.6
A32MFCTSS-16S2 1575 2.9 - 5.8 2.2 - 4.3 444 17.5 1.85 4.2
A32MFCTSS-11S2 1050 3.8 - 7.5 2.8 - 5.6
A32MFCTSS-6S1 775 5 - 10 3.8 - 7.5 21 0.8
A32MFCTSS-10 1000 6.5 - 13 5 - 10
A32MFCTSS-8 800 9 - 18 6.5 - 13 469 18.5 1.95 4.4
A32MFCTSS-6 645 12 - 23 8.5 - 17
A32MFCTSS-5 540 13.5 - 27 10 - 20
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of rated torque.
ADDITIONAL COST OPTIONS:
51 mm (2") Travel Retractable Spindle Special 3.5 Nm Max Torque models @ 1575 or 775 RPM Special 7.5 Nm Max Torque model @ 775 RPM
SPINDLE OPTIONS:S3362 3/8" Square Drive X 1 5/32" Ext Spindle M3243 3/8" Square Drive X 1.478" Ext Spindle M3090 3/8" Square Drive X 2"Ext Spindle S3363 3/8" Square Drive X 2 3/8" Ext Spindle M3239 3/8" Square Drive X 3" Ext Spindle M3223 3/8" Square Drive X 4" Ext Spindle
S3486 3/8" Square Drive X 4-1/16" Ext Spindle M3224 3/8" Square Drive X 6" Ext Spindle S3626 3/8" Square Drive X 7 3/8" Ext Spindle M3216 3/8" Square Drive X 8" Ext Spindle M3118 3/8"-24 Threaded Spindle M3227 3/8"-24 X 3/4" Ext Threaded Spindle
Adjustable Clutch Control Improves Precision
Improved durability with virtually no clutch wear
Torque level not affected by supply pressure variations
Quiet motor and rear exhaust maintains low noise level
A32MFCT Motors give precise control for fixtured applications.STANDARD CONFIGURATION:
Flange Mount
Retractable Spindle 19 mm (3/4") travel
3/8" Square Drive
Remote Start Valve Running and Shutoff Signals
Unique CT Clutch Rolling Action
Durable rolling element reduces
the need for torque adjustment.
www.StanleyAssembly.com 27 RevC0702
A32MFO FLANGED OFFSET MOTORSWITH “CT” CLUTCH ACTUATED SHUT-OFF
1575 – 540 RPM 3.5 - 27 Nm (2.6 - 20 lb ft)
Min Hose Size: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); Air Consumption: 10 l/s (20 ft3/m) Remote Start: 1/8” NPT
RATEDSPEED
TORQUERANGE
"R"SIDE TO CENTER
"L” LENGTH WEIGHT
MODEL RPM Nm lb ft mm in mm in kg lb
A32MFOCTSS-11S3 1050 1.8 - 3.5 1.3 - 2.6
A32MFOCTSS-16S2 1575 2.9 - 5.8 2.2 - 4.3 444 17.5 2.15 4.8
A32MFOCTSS-11S2 1050 3.8 - 7.5 2.8 - 5.6
A32MFOCTSS-6S1 775 5 - 10 3.8 - 7.5 13 0.5
A32MFOCTSS-10 1000 6.5 - 13 5 - 10
A32MFOCTSS-8 800 9 - 18 6.5 - 13 469 18.5 2.25 5.0
A32MFOCTSS-6 645 11.5 - 23 8.5 - 17
A32MFOCTSS-5 540 13.5 - 27 10 - 20
Note: Performance specifications @ 620 Pa (90 psi). Output torque adjusts to 50% of rated torque.
ADDITIONAL COST OPTIONS:
Special 3.5 Nm Max Torque models @ 1575 or 775 RPM Special 7.5 Nm Max Torque model @ 775 RPM
SPINDLE OPTIONS:S3362 3/8" Square Drive X 1 5/32" Ext Spindle M3243 3/8" Square Drive X 1.478" Ext Spindle M3090 3/8" Square Drive X 2"Ext Spindle S3363 3/8" Square Drive X 2 3/8" Ext Spindle M3239 3/8" Square Drive X 3" Ext Spindle M3223 3/8" Square Drive X 4" Ext Spindle
S3486 3/8" Square Drive X 4-1/16" Ext Spindle M3224 3/8" Square Drive X 6" Ext Spindle S3626 3/8" Square Drive X 7 3/8" Ext Spindle M3216 3/8" Square Drive X 8" Ext Spindle M3118 3/8"-24 Threaded Spindle M3227 3/8"-24 X 3/4" Ext Threaded Spindle
Adjustable Clutch Control Improves Precision
Improved durability with virtually no clutch wear
Torque level not affected by supply pressure variations
Quiet motor and rear exhaust maintains low noise level
A32MFOCT Motors give precise control for close center bolt spacing applications. STANDARD CONFIGURATION:
Flange Mount
Retractable Spindle 19 mm (3/4") travel
3/8" Square Drive
Remote Start Valve Running and Shutoff Signals
Unique CT Clutch Rolling Action
Durable rolling element reduces
the need for torque adjustment.
www.StanleyAssembly.com 28 RevA1099
M30 & M40 PRIME MOVER MOTORS
FIXTURED-PNEUMATIC - NO MOUNT 9 – 87 Nm (6.5 – 64 lb ft)
Simple Design And Sturdy Construction Provide Long Life And Low Maintenance Costs
Regulating of the air pressure adjusts speed and power
High power per pound ratio minimizes required space
Air motor may be stalled repeatedly with no damage to the motor
No spark hazard allows air motor use in explosive atmospheres
or near flammable material
Air motors are not susceptible to thermal breakdown in high temperature areas
Continuous duty operation maximizes production use
Min Hose: M30: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); 10 l/s (20 ft3/m) M40: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); 20 l/s (40 ft3/m)
FREESPEED
STALLTORQUE
RATEDHP
MAXRPM
TORQUE@MAX HP
"L" LENGTH
"D" DIAMETER WEIGHT
MODEL RPM Nm lb ft H.P. RPM Nm lb ft mm in mm in kg lb
NON-REVERSIBLE M30
M30-16 1650 9 6.5 0.5 845 4 3 157 6.8 41 1.62 1.2 2.6
NON-REVERSIBLE M40
M40-16 1600 21 16 820 11 8 191 7.5 2 4.3
M40-5 500 65 48 1.2 265 33 24 216 8.5 52 2.06 2.2 4.7
M40-4 375 87 64 200 43 32
REVERSIBLE M40R
M40R-3 300 80 59 0.9 165 40 29 216 8.5 52 2.06 2.2 4.7
ADDITIONAL COST OPTIONS:
Reverse Rotation (Add ‘RR’ MODEL eg: M40RR-5)
Special Gearing
M30/40 Prime Mover Motors give reliable and economical power for production operations.
STANDARD CONFIGURATION: M30 Output Shaft: 13mm (1/2”) diameter x 25mm (1”) long with 3 x 3 x 16 mm (1/8” x 1/8” x 5/8”) long keywayM40 Output Shaft: 16mm (5/8”) diameter x 44mm (1.75”) long with 5 x 5 x 25 mm (3/16” x 3/16” x 1”) long keyway
www.StanleyAssembly.com 29 RevA1099
M30 & M40 PRIME MOVER MOTORS-FLANGE MOUNTED
FIXTURED-PNEUMATIC –FLANGE MOUNTED 5.5 – 32 Nm (4 – 24 lb ft)
Simple Design And Sturdy Construction Provide Long Life And Low Maintenance Costs
Regulating of the air pressure adjusts speed and power
High power per pound ratio minimizes required space
Air motor may be stalled repeatedly with no damage to the motor
No spark hazard allows air motor use in explosive atmospheres
or near flammable material
Air motors are not susceptible to thermal breakdown in high temperature areas
Continuous duty operation maximizes production use
Min Hose: M30: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); 10 l/s (20 ft3/m) M40: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); 20 l/s (40 ft3/m)
FREESPEED
STALLTORQUE
RATEDHP
MAXRPM
TORQUE@MAX HP
"L"LENGTH
"D"DIAMETER WEIGHT
MODEL RPM Nm lb ft H.P. RPM Nm lb ft mm in mm in kg lb
NON-REVERSIBLE M30F
M30F-5 500 30 22 0.5 265 14 10 173 6.8 41 1.62 1.3 2.9
NON-REVERSIBLE M40F
M40F-37 3700 8.5 6 1.2 1875 4.5 3.4 191 7.5 52 2.06 2 4.3
M40F-26 2600 12.5 9 1325 6.5 5
REVERSIBLE M30FR
M30FR-18 1800 5.5 4 0.4 920 3 2 152 6 41 1.62 1.2 2.6
REVERSIBLE M40FR
M40FR-13 1300 19.5 14 0.9 670 10 7 191 7.5 52 2.06 2 4.3
M40FR-7 750 32 24 395 16.5 12 216 8.5 2.1 4.7
ADDITIONAL COST OPTIONS:
M3005 Pilot Ring for M30F
M4005 Pilot Ring for M40F
Reverse Rotation
Special Gearing
M30/40F Prime Mover Motors give reliable and economical power for flange mounted motor geometry.STANDARD CONFIGURATION: M30 Output Shaft: 13mm (1/2”) diameter x 25mm (1”) long with 3 x 3 x 16 mm (1/8” x 1/8” x 5/8”) long keywayM40 Output Shaft: 16mm (5/8”) diameter x 44mm (1.75”) long with 5 x 5 x 25 mm (3/16” x 3/16” x 1”) long keyway
www.StanleyAssembly.com 30 RevA1099
M30 & M40 PRIME MOVER MOTORS-BASE MOUNTED
FIXTURED-PNEUMATIC – BASE MOUNTED 14 – 59 Nm (19 – 80 lb ft)
Simple Design And Sturdy Construction Provide Long Life And Low Maintenance Costs
Regulating of the air pressure adjusts speed and power
High power per pound ratio minimizes required space
Air motor may be stalled repeatedly with no damage to the motor
No spark hazard allows air motor use in explosive atmospheres
or near flammable material
Air motors are not susceptible to thermal breakdown in high temperature areas
Continuous duty operation maximizes production use
Min Hose: M30: 5/16” ID, Air Inlet 1/4” NPT (1/4” ISO Inlet Option); 10 l/s (20 ft3/m) M40: 1/2” ID, Air Inlet 3/8” NPT (3/8” ISO Inlet Option); 20 l/s (40 ft3/m)
FREESPEED
STALLTORQUE
RATEDHP
MAXRPM
TORQUE@MAX HP
"L"LENGTH
"D"DIAMETER WEIGHT
MODEL RPM Nm lb ft H.P. RPM Nm lb ft mm in mm in kg lb
REVERSIBLE M30BR
M30BR2-2 240
M30BR2-012 145 FOR MAX SPEED: Torque Not Rated 212 8.4 41 1.62 1.4 3
M30BR2-006 75
REVERSIBLE M40BR
M40BR-13 1300 19 14 670 10 7 191 7.5 2 4.3
M40BR-7 750 32 24 0.92 395 16.5 12 216 8.5 52 2.06 2.2 4.7
M40BR-3 300 80 59 165 40 29
ADDITIONAL COST OPTIONS:
M4005 Pilot Ring for M30BR2/M40BR
Reverse Rotation
Special Gearing
M30B2/40B Prime Mover Motors give reliable and economical power for base mounted motor geometry. STANDARD CONFIGURATION: Output Shaft: 16mm (5/8”) diameter x 44mm (1.75”) long with 5 x 5 x 25 mm (3/16” x 3/16” x 1”) long keyway
NUTRUNNERS PNEUMATIC, REVERSIBLE, NON SHUT OFFPISTOL
STANDARD CONFIGURATION:Suspension Bail3/8" Square Drive- 120 Models: 1/2” Square DriveAdjustment Wrenches
Note: 1/4” NPT Inlet, Min. Hose Size: 3/8” ID (5/16" - 15 Models) Use impact rated sockets and impact grade anti-wobble sockets
Pu0504
STRAIGHT NUTRUNNERS PNEUMATIC, REVERSIBLE, NON SHUT OFF
Ergonomic Design Reduces Operator Fatigue
� Virtually no torque reaction to the operator.
� Ergonomically quiet with low vibration.
� Oil-free operation eliminates fogging and product contamination.
� Comfortable elastomer grip on pistol models.
31
R
L
R
L
Enhances Quality and Productivity
� Dual chamber motor and double blade pulsing mechanism
speed tightening.
� Pistol or straight models fit different tightening applications.
� Ceramic coated aluminum liner and end plates improve durability.
� Transducer equipped models for electronic feedback torque control.
� PSI Qualifier compatible for error proofing assembly operations.
P PRODUCTIVITY
E ERGONOMICS
PULSE
MODEL
RATED
SPEED
TORQUE
Nm
TORQUE
lb ft
“R”
SIDE TO
CENTER
“L”
LENGTH
AIR
CONSUMPTION WEIGHT
RPM Min Max Min Max mm in mm in cfm L/sec lb Kg
P2PR-15 7500 7 15 5 11 25 1 140 5.5 28 14 1.9 0.9
P3PR-35 7000 15 35 11 26 28 1.1 157 6.2 38 19 2.7 1.2
P3PR-70 6000 35 70 26 52 28 1.1 173 6.8 38 19 2.9 1.4
P4PR-120 5800 60 120 29 88 33 1.3 196 7.7 42 21 4.2 1.9
TRANSDUCER EQUIPPED
P2PRX-15 7500 7 15 5 11 25 1 216 8.5 28 14 2.9 1.3
P3PRX-35 7000 15 35 11 26 28 1.1 234 9.2 38 19 3.9 1.8
P3PRX-70 6000 35 70 26 52 28 1.1 249 9.8 38 19 4.2 1.9
P4PRX-120 5800 60 120 29 88 33 1.3 272 10.7 42 21 5.7 2.6
MODEL
RATED
SPEED
TORQUE
Nm
TORQUE
lb ft
“R”
SIDE TO
CENTER
“L”
LENGTH
AIR
CONSUMPTION WEIGHT
RPM Min Max Min Max mm in mm in cfm L/sec lb Kg
P2LR-15 8000 7 15 5 11 25 1 173 6.8 28 14 1.7 0.8
P3LR-35 8200 15 35 11 26 28 1.1 196 7.7 38 19 2.3 1.0
P3LR-70 6500 35 70 26 52 28 1.1 229 9 38 19 2.7 1.2
TRANSDUCER EQUIPPED
P2LRX-15 8000 7 15 5 11 25 1 249 9.8 28 14 2.7 1.2
P3LRX-35 8200 15 35 11 26 28 1.1 272 10.7 38 19 3.7 1.5
P3LRX-70 6500 35 70 26 52 28 1.1 305 12.0 38 19 4 1.7
www.StanleyAssembly.com
Customer Supplied ItemsCustomer Supplied Items
Pulse, Impact orContinuous Drive Tools
1. Incoming product for assembly, enables the qualifier and resets the fastener count from Switch 1.
Yellow lights equal to the number of fasteners to be assembled are illuminated.
2. An operator installs the fasteners with a pneumatic assembly tool. The PSI Qualifier determines
complete versus incomplete assembly cycles. A green light illuminates for each complete assembly
cycle. The display shows NOK and an alarm sounds for incomplete assembly cycles from double hits,
cross threads, strip outs or short cycles.
3. The PSI Qualifier increments the completed cycle display for each fastener installed with a
complete (OK) cycle. When all of the required fasteners are assembled with completed cycles, the
green batch OK light illuminates. If any fasteners have incomplete assembly cycles, the red batch
NOK light illuminates. Standard I/O signals from the PSI Qualifier can be used to prevent products
moving out of station (Switch 2) before all fasteners have complete assembly cycles.
Error Proofing with Pneumatic Tool and PSI Qualifier
Improves Assembly Quality by Rejecting Incomplete Fastening Cycles
� Qualifies to an external torque transducer� Detects cross threads, re-hits, strip outs and interrupted
cycles� Programmable cycle counter prompts preventive
maintenance actions.
Enables Error Proofing Pneumatic Tools
� Lights, the display and an audible alarm signal the operator of cycle status for each fastener
� As many as eight parameter sets simplify tool changes for different joints
� Standard RS-232 and discrete I/O interface
Tool Signal Lines or Porting Not Required
PSI ASSEMBLY QUALIFIER FOR PNEUMATIC TOOLS
WORK STATION
MADEIN
U.S.A.
STANLEYAIRTOOLS
OFF
MADEIN
U.S.A.
STANLEYAIRTOOLS
OFF
MADEIN
U.S.A.
STANLEYAIRTOOLS
OFF
MADEIN
U.S.A.
STANLEYAIRTOOLS
OFF
MA
DE
INU.S
.A.
STA
NLEY
AIR
TO
OLS
MA
DE
INU.S
.A.
STA
NLEY
AIR
TO
OLS
MA
DE
INU.S
.A.
STA
NLEY
AIR
TO
OLS
MA
DE
INU.S
.A.
STA
NLEY
AIR
TO
OLS
PLC
www.StanleyAssembly.com 32
PSI ASSEMBLY QUALIFIER FOR PNEUMATIC TOOLS
PSI displaysprogramming optionsand assembly results
LED shows selected
parameter set
Up/Down keys scroll menu
options
· Programming options include torque units, parameter setup, bolt count, target torque, and transducer scale.
� Results display includes target torque, parameter set, bolt count, and OK/NOK
· Teach mode calibrates PSI to an external reference transducer used during setup only
� Learn mode records normal cycle and rehit joint signatures for error proofing
PSI Display and Color LED's Show Assembled Fasteners and Number Remaining to Complete the Batch
PSI Menus Simplify Assembly Setup
PSI0104
PSI CONTROLLER SPECIFICATIONSOperator Interface Inputs/Outputs:
Dual Line 0.5” LCD backlit (16) character Disable (Part Not-Present), Batch Clear, with screw lug
Four-button keypad (Enter, Up, Down & Reset/Reverse) terminal connection, Opto isolated & dry contact relays
Sixteen (16) Yellow-Green LED Fastener COUNTING Error Proofing:
STATUS indicators Cycle OK / NOK & Batch OK / NOK
Eight (8) LED Parameter/Application set Indicators Dry contact relays; up to 48 VDC and 10 amps
Batch Status: “Green” OK / “Red” NOK Standard Data Output :
REVERSE button; momentary for one reverse cycle; Serial Port RS 232 port; DB9 connector, ASCII Format:hold down for batch reset “Date, Time, Par Set, Target TQ, TQ Result, Batch Count, OK/NOK”
Operating Conditions: Dimensions:
Humidity: 0 – 95% non condensing 20w x 30.5h x 15d cm (8w x 12h x 6d in)
Temperature: 0 to +50 degrees Celsius 5 kg (10.5 lb)
Power Source: 100-240VAC 60/50Hz Air Supply: 35 scfm @ 6 bar pressure (87psi)
High Flow: 80 scfm @ 6 bar pressure (87psi)
PSI-Q Models for Tools with Vented Shutoff
PSI- Q Option V
Q = Qualifier V = Vented Shutoff Tool
X = None
D = Device Net
R = DCXPFCS Serial Port
Remote Operator Interface Option P/N 21E100200: Up/Down Parameter Select Arrows,Batch Reset and Cycle Override, Red NOK LED, (3 X 5 X .5”/adhesive back for mounting)Requires Cable P/N 20C200307: 7m Network cable/ RJ-45 Connectors
PSI-C or -H Models for Non Shutoff Tools
PSI- Type Option Tool Type
C = Standard Flow P = Non Shutoff Impulse/Impact Tool(< ~100 Nm or 35 scfm) D = Non Shutoff Direct Drive
H = Hi Flow (> ~100 Nm or 35 scfm) X = None
D = Device Net
R = DCXPFCS Serial Port
Green Batch OKRed Batch NOK LED’s
Color LED’s indicate status for as many
as 16 fasteners
Contact your Stanley representative for interface requirements on specific tools.
www.StanleyAssembly.com 33
www.StanleyAssembly.com
2004Pnue Rev0
Toll Free in the United States: For Service Call: (877) 787-7830 For Sales Call: (877) 709-8006
CONTACTS
STANLEY ASSEMBLY TECHNOLOGIES : 5335 Avion Park Drive, Cleveland, Ohio 44143-2328 USA Tel: +1 (440) 461-5500 Fax: +1 (440) 461-5592 (Contact for Americas and Asia-Pacific except China)
STANLEY ASSEMBLY TECHNOLOGIES : Applications and Productivity Center, 5800 Enterprise Court, Warren, Michigan 48092 USA Tel: +1 (586) 393-1100 Fax: +1 (586) 393-1200
STANLEY ASSEMBLY TECHNOLOGIES: Gowerton Road, Brackmills, Northhampton NN4 7BW England Tel: +44 (1604) 827247; Fax: +44 (1604) 827277
STANLEY WORKS Ltd. (FRANCE): Outils Portatifs et Systemes d’Assemblage, Zone Imoparc bat Loire 4, 78190 Trappes, France Tel: +33 (1) 3050 9100 Fax: +33 (1) 3051 0708
STANLEY TOOLS S.r.l. (ITALY): Divisione Assembly Technologies, 47 Via Parco, 20046 Biassono (MI) Tel: +39 (039) 2389.1, Fax: +39 (039) 2389970
STANLEY GERMANY, Inc.: Frankfurter Strasse 74, D-64521 Gross-Gerau, Germany Tel: +49 (0) 6152 8052-0, Fax: +49 (0) 6152 8052-22, [email protected]
THE STANLEY WORKS SHANGHAI REPRESENTATIVE OFFICE, Room 1908, Shanghaimart Tower, 2299 Yan An Road West, Shanghai 200336, China, Tel : 011-86-21-3208-4550; Fax: 011-86-21-6236-0191
© THE STANLEY WORKS, ALL RIGHTS RESERVED