pneumatic actuator productsdynamicfluid.com/images/catalogues/parker/pneumatic...rotary actuators pv...

ENGINEERING YOUR SUCCESS.

aerospaceclimate controlelectromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shielding

Pneumatic Actuator ProductsCylinders, Guided Cylinders and Rotary Actuators

Catalog 0900P-E

! WARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its autho-rized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled “Offer of Sale”.

© Copyright 2011, 2009, 2008 Parker Hannifin Corporation. All Rights Reserved

Pneumatic Actuator ProductsCatalog 0900P-E

Warning, Offer of Sale

Parker Hannifin CorporationPneumatic DivisionWadsworth, Ohiowww.parker.com/pneumatics

1 Parker Hannifin CorporationPneumatic DivisionWadsworth, Ohio www.parker.com/pneumatics

Pneumatic Actuator ProductsProduct Selection Chart

Catalog 0900P-E

Index

Application Engineering Data A

Tie Rod Cylinders 3MA/4MA Series, 3MAJ/4MAJ Series, 4MNR Series, ACVB Option, LPSO Option, S Series, C Series B

ISO Cylinders P1D Series, P1A Series C

Round Body Cylinders SR Series, SRM Series, SRD/SRDM Series, SRX Series, P1L Series, P Series D

Compact CylindersP1M Series, P1M Series with Tooling Plate, P1M Series Swing Clamp, LP/LPM Series, C05 Series, P1G Series E

Guided Cylinders P5T Series, P5T2 Series, P5L Series, HB Series, P5E Series F

Rodless Cylinders OSP-P, P1X Series, P1Z Series, RC Series, GDL G

Rotary Actuators PV Series, PRN(A) Series, WR Series, PTR Series, B671/F672 Series, HP Series, P5W Series H

Pneumatic Grippers For Complete Information, Refer to Catalog 1900-2 J

Air Motors P1V-S Series For Complete Information, Refer to Catalog PDE2554TCUK-ul K

Complementary Products Linear Alignment Couplers, Flow Controls, 4TK Air Oil Tanks, PRL Series, Transition Kits L

Electronic Sensors Solid State, Reed and Proximity Sensors M

Industrial Shock Absorbers Industrial Shock Absorbers (Linear Decelerators) NFax Forms, Safety Guide, Offer of Sale

Application FAX Forms P

Indu

stria

l Sh

ock

Abso

rber

s

Fax

Form

s,

Safe

ty G

uide

, Of

fer o

f Sal

e

Pneu

mat

ic

Grip

pers

Ro

tary

Actu

ator

sRo

dles

s Cy

linde

rsCo

mpa

ct

Cylin

ders

Roun

d Bo

dy

Cylin

ders

Tie

Rod

Cylin

ders

Engi

neer

ing

Data

ISO

Cylin

ders

Guid

ed

Cylin

ders

Air M

otor

sCo

mpl

emen

tary

Pr

oduc

tsEl

ectro

nic

Sens

ors

Compact Pneumatic Cylinders

Parker Hannifin CorporationPneumatic DivisionWadsworth, Ohio www.parker.com/pneumatics

E1

LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Section E

Section E – Compact Pneumatic Cylinders

P1M Series • 10 Bore Sizes: 12mm through 100mm

• Short Overall Length

• Smooth Extruded Exterior

• Flexible Porting

• Piston Position Sensing

P1M Series with Tooling Plate • 32, 40 and 50 mm Bore Sizes



• Industry Interchangeable

• Non-Rotating Capability

P1M Series Swing Clamp • 32, 40 and 50 mm Bore Sizes


• 90° Clamping Rotation

• Right Hand or Left Hand Rotation


LP / LPM Series • Low Profile Design

• 6 Mounting Styles

• 8 Bore Sizes from 9/16" to 4"

• Strokes from 1/8" to 6"

• Permanent Lubrication

C05 Series • 6 Bore Sizes – 8mm though 63mm

• Short Stroke Cylinder

• Block Style Mount

• Single and Double Acting Available

P1G Series • 6, 10, and 16mm Bore Sizes

• 5, 10, and 15mm Stroke Lengths

• Cartridge Style Mount

• Single Acting, Non-Lube Design

• Nickel Plated Brass Body with Stainless Steel Rod for Corrosion Resistance


E2

E

Catalog 0900P-E

Section E Overview

E3 Parker Hannifin CorporationPneumatic DivisionWadsworth, Ohio www.parker.com/pneumatics

LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

P1M Series Extra Low Profile Pneumatic Cylinder

ContentsFeatures ..............................................................................E4Ordering Information............................................................E5Specifications ......................................................................E6Technical Data .....................................................................E7Dimensions .................................................................. E8-E11

Mounting Dimensions ................................................ E12-E15 Double Rod Style Dimensions ................................... E16-E17Rod End Accessories ................................................ E18-E19 Service Kits .......................................................................E20

Extra Low Profile Pneumatic CylindersP1M Series

E4

C086


E

Catalog 0900P-E

Features

Z-Profile Piston Seal Dynamic piston seal features two rounded micro sealing edges for maximum wear compensation and rounded grooves for retaining lubrication.

SensorsRecessed, flush position sensors available in PNP, NPN or REED styles.

ConstructionInnovative 3-piece bolted design.

PortsOptional NPTF or BSPP ports at no extra charge.

BumpersOptional bumpers provide noise reduction and impact resistance. Urethane for 12-25mm bore sizes, Hytrel® for 32-100mm bore sizes.

Cylinder BodySmooth anodized aluminum exterior provides wear- resistant surface.

Unique Internal Transfer TubeProvides a passage that can be used for remote porting.

Rounded Lip Rod Wiper Seal Non-lube urethane rod seal provides dual function as rod seal and rod wiper to eliminate leakage and prevent contamination from entering the cylinder.

Piston RodStainless steel or hard chrome plated carbon steel piston rods (stainless steel standard on 25mm bore and under).

Mounting HolesCounter bored tapped or through holes for mounting.

Rod EndsFour standard piston rod ends to meet a variety of requirements.

Piston MagnetLocated behind the piston in a separate magnet carrier, the piston magnet is used for electronic piston sensing. (Increases cylinder body length.)

High Strength Rod BearingMultilayer PTFE with steel backing.

Extra Low Profile VersionThe Extra Low Profile Bearing Version allows us to provide the most compact cylinder possible. This bearing version is recommended for applications that require shorter stroke lengths or that are light duty. It is available in stroke lengths up to 50mm in the smaller bore sizes and 150 mm in the larger bore sizes.

Long Bearing VersionThe Long Bearing Version provides additional rod bearing and piston bearing support and also includes a magnetic piston with bearing strip for greater piston bearing support. This Long Bearing version is required for stroke lengths beyond the Extra Low Profile maximum stroke length and is recommended for higher duty applications.

Hytrel® is a registered trademark of DuPont.


E5

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Ordering Information

How to Order P1M Series Cylinders

P1M 032 C / D C P 6 G 012

Bore Size

012 12mm

016 16mm

020 20mm

025 25mm

032 32mm

040 40mm

050 50mm

063 63mm

080 80mm

100 100mm

Cylinder Style

C Basic No Mtgs.

A Double Rear Clevis 1,3

B Single Rear Clevis 1,3

F Foot Mount 1,4

J Front Flange 1 H Rear Flange 1, 3

Insert “/ ” todenote Special

Function

D Double Acting

K Double Rod

R Single Acting Spring Return 6

E Single Acting Spring Extend 4

Piston/Seal Material

Without Magnet 2

C No Bumpers Class 1 Std. Temp. Seals

G No Bumpers Class 5 Fluorocarbon Seals

B With Bumpers Class 1 Std. Temp. Seals 7

With Magnet 5(Not available on Spring

Extend Models)

N No Bumpers Class 1 Std. Temp. Seals

M With Bumpers Class 1 Std. Temp. Seals 7

Maximum Stroke Lengths

BoreELP Bearing Version Long Bearing Version Single Acting Version

Min. Stroke* Max. Stroke Min. Stroke* Max. Stroke Standard Stroke

12 3 50 4 200 5,10

16 3 50 4 200 5,10

20 3 50 8 200 5,10

25 3 50 8 200 5,10

32 3 100 9 320 5,10

40 3 100 7 320 5,10

50 3 100 13 320 10, 20, 25

63 3 100 18 500 10, 20, 25

80 3 150 23 500 10, 20, 25

100 3 150 18 500 10, 20, 25

* Minimum Stroke for Double Rod cylinders: 12-63mm Bores is 5mm 80 &100mm Bores is 10mm

Piston Rod & Bearings

Extra Low Profile Rod Bearing

P Chrome Plated Steel Rod Not Available on 12-25mm Bores

Y Stainless Steel Rod Standard on 12-25mm Bores and Spring Extend Models

Long Rod Bearing 2

C Chrome Plated Steel Rod Not Available on 12-25mm Bores

A Stainless Steel Rod Standard on 12-25mm Bores and Spring Extend Models

Stroke in mm

Rod Threads

Inch 4 Male

9 Female

Metric 5 Male

6 Female

3 Special Rod End

Ports

BSPP

G Ported Each End

H Both Ports Head

J Both Ports Cap

K Both Ports Cap Face 3

NPTF(Not available on 12-25mm Bores)

N Ported Each End

M Both Ports Head

L Both Ports Cap

P Both Ports Cap Face 3

NOTES:1 Fitted with Mounting Accessory2 Magnetic Piston Option must be

specified along with Long Rod Bearing option to achieve Long Bearing Version

3 Porting Options ‘K’ and ‘P’ (Both ports cap face) not available with rear mountings

4 Single Acting Spring Extend available with stainless steel rod only.

5 For information regarding sensors, please refer to Electronic Sensors section.

6 Spring return is short bearing version only.

7 Bumper only available on head end for spring extend. Bumper only available on cap end for spring return.

For ordering purposes, when special options or common modifications are requested, the factory will assign a sequential part number in place of the model number.

(Revised 12-03-13)


E6

C086


E

Catalog 0900P-E

Specifications

Material Specifications 1

Piston Rod 12mm to 25mm bores: Stainless Steel 32mm to 100mm bores: Chrome Plated Carbon Steel Std., Optional Stainless Steel (Stainless Steel std. on single-acting spring extend)Piston Rod Seal PolyurethanePiston Rod Bearing 2 Multilayer PTFE with Steel BackingEnd Covers Anodized Aluminum AlloyAssembly Cap Screws Stainless Steel / Zinc-Plated SteelO-Rings Nitrile Rubber, NBRCylinder Body Anodized Aluminum AlloyPiston Aluminum AlloyPiston Seal Nitrile Rubber, NBRMagnetic Piston Bearing 3 Brass (12-25mm) Nylon (32-100mm)Magnet Plastic Coated Magnetic MaterialBumpers PolyurethaneReturn Spring Chrome Silicon Wire

High Temperature OptionO-Rings Fluorocarbon, FPMPiston Rod Seal Fluorocarbon, FPMPiston Seal Fluorocarbon, FPM

Additional Data

Working Pressure Max.10 Bar AirStandard Temperature -20°C to +80°C -4°F to +176°FHigh Temperature Service -10°C to +121°C +14°F to 250°F

1 Dimensions not otherwise noted are listed in millimeters (mm) 2 Excludes 12-25mm bore Rod Style Y3 Magnetic Piston option is not available on Spring Extend models.

Spring Return Spring Extend

Single Acting CylindersBore(mm)

Return Loads Extend Loads Standard Stroke

Lengths(mm) 2

Max (lbs)

Min(lbs)

Max(lbs)

Min(lbs)

12 2.8 1.0 2.5 1.1 5,10

16 3.5 1.5 4.0 2.0 5,10

20 3.5 1.5 5.0 2.5 5,10

25 4.7 2.5 6.0 2.5 5,10

32 6.0 3.5 6.5 4.0 5,10

40 7.2 4.7 7.0 4.0 5,10

50 14.3 6.0 18.0 8.0 10, 20, 25

63 14.3 6.0 18.0 8.0 10, 20, 25

80 26.0 14.0 25.0 10.0 10, 20, 25

100 26.0 14.0 25.0 10.0 10, 20, 25

NOTES:1 Overall Length to be the same as double-acting models with

comparable bearing, piston and porting configuration.

2 Single-acting cylinders are available in standard stroke lengths. Custom stroke lengths are available upon request.

3 Spring Extend cylinders available with stainless steel rod only.

4 Magnetic Piston Option is not available on Spring Extend Models.

BoreDouble Acting* Single Acting**

Single Rod Double Rod

Spring Return

Spring Extend

12 1.4 2.0 – 1.0

16 1.6 2.0 0.6 1.0

20 2.2 3.0 0.7 1.5

25 2.2 3.0 0.7 1.5

32 1.0 1.0 – –

40 1.0 1.0 – –

50 0.8 0.8 – –

63 1.0 1.0 – –

80 0.8 0.8 – –

100 1.0 1.0 – –

* Bumpers at both ends** Bumpers at end opposite of spring only.

Additional Length for Bumper Option


E7

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Technical Data

Forces, Weights, Air Consumption

Bore(mm)

Area(cm2)

Piston Rod ExtendForce*

(N)

Retract Force*

(N)

Weight Air Consumption

(Liters)**Dia.

(mm) Area (cm2) Zero Stroke(kg)

Per 10mmStroke (kg)

12 1.13 6 0.28 67 50 0.060 0.016 0.0139

16 2.01 8 0.50 120 91 0.090 0.022 0.0246

20 3.14 10 0.78 188 142 0.150 0.032 0.0385

25 4.91 10 0.78 294 247 0.170 0.034 0.0633

32 8.0 12 1.1 482 414 0.260 0.044 0.1050

40 12.6 16 2.0 754 633 0.370 0.060 0.1620

50 19.6 20 3.1 1178 989 0.570 0.085 0.2530

63 31.2 20 3.1 1870 1681 0.860 0.098 0.4140

80 50.3 25 4.9 3016 2721 1.460 0.146 0.6690

100 78.5 25 4.9 4712 4417 2.390 0.155 1.0430

*Theoretical cylinder force at 600 kPa (6 bar).** Free air consumption per 10mm stroke length for an extend and retract stroke at 600 kPa (6 bar)

Front Profiles by Bore Size

To retract cylinder apply air to port #2To extend cylinder apply air to port #4For a double rod cylinder, pressurize port #2 to retract the piston rod into the head containing the ports.

*For 12mm to 16mm bores, although the location of ports #2 and #4 are reversed, porting functions shown above apply.

Bores 32-50mm Bores 63-100mmBores 12-25mm

Porting Configurations

Both Ports Cap Both Ports Head* Both Ports Cap Face

24

24

24

24

Double Rod Both Ports One End


E8

C086


E

Catalog 0900P-E

Dimensions Extra Low Profile Version

RT

BG1

HL HL

BG2

EE 2 Places

WH

PL

NB NB

E2

E1

E

R SQ.

24

ALL PORTINGCONFIGURATIONS

MOUNTING HOLE CONFIGURATIONBOTH PORTS HEAD

EE1 (Orifice Ø)2 Places

BOTH PORTS HEAD

Bores 12-50mm:(2) ØR2 Thru, 180° Apart. (4) ØR1 C'Bore;Bores 63-100mm:(4) ØR2 Thru, (8) ØR1 C'Bore

I92

ØR

2

ØR

1

Ø MM

I53 (I73) + Stroke

L° L°

I12

I91

ZL3 (ZH3) + Stroke

OPTIONAL PORTING CONFIGURATIONS

MOUNTING HOLE CONFIGURATIONBOTH PORTS CAP OR CAP FACE,

PORTS AT HEAD & CAP

RT

BG1

HL HL

BOTH PORTS CAP


ZL1 (ZH1) + Stroke

PL

EE 2 Places

WH

HEAD & CAP PORTED

BOTH PORTS CAP FACE

WH

ZL1 (ZH1) + Stroke


EE 2 Places

PL

ZL1 (ZH1) + Stroke

WH

PL


EE 2 Places

I51 (I71) + Stroke I51 (I71) + Stroke

P1P2

P3

P4

I51 (I71) + Stroke

ØR

1

ØR

2

I91 I91

I12I12

I12

24

24

Note: Magnetic Dimensions in Parentheses


E9

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

EBore Rod

AF AM KF KK WHI12 SW

Style 6 Style 9 Style 5 Style 4 Style 6 Style 9 Style 5 Style 4 Style 4, 9 & 6 Style 5

12 6 6 5.4 9 8 M3x0.5 #8-32 M5x0.8 #8-32 3.5 5 3 5

16 8 8 5.4 10 8 M4x0.7 #8-32 M6x1.0 #8-32 3.5 5.5 3 7

20 10 7 7 12 8 M5x0.8 #10-32 M8x1.25 #10-32 4.5 6.5 4 9

25 10 12 10 15 9.5 M6x1.0 1/4-28 M10x1.25 1/4-28 5 7.5 4 9

32 12 13 13.3 20.5 12.7 M8x1.25 5/16-24 M12x1.25 5/16-24 7 8 5 10

40 16 13 18.3 20.5 16 M8x1.25 3/8-24 M14x1.5 3/8-24 7 8 5.5 13

50 20 15 17.6 26 19.5 M10x1.5 1/2-20 M18x1.5 1/2-20 8 7.5 5.5 16

63 20 15 17.6 26 19.5 M10x1.5 1/2-20 M18x1.5 1/2-20 8 7.5 5.5 16

80 25 21 24.3 32.5 25.5 M16x2.0 5/8-18 M22x1.5 5/8-18 10 11 6 21

100 25 27 27 32.5 28.5 M20x2.5 3/4-16 M22x1,5 3/4-16 12 11 6 21

Bore P3 P4 PL PM R R1 R2* RTNon-Magnetic Magnetic ELP

Max StrokeI51 I53 ZL1 ZL3 I71 I73 ZH1 ZH3

12 13.5 13.5 5 8.5 15.5 5.8 3.5 M4 22 17 25.5 20.5 33 28 36.5 31.5 50

16 15.5 18 5 9 20 7.4 3.5 M4 23.5 18.5 27 22 34.5 29.5 38 33 50

20 24.5 21.5 5 9 25.5 9 5.5 M6 24 19.5 28.5 24 34 29.5 38.5 34 50

25 27.5 24.5 7 9 28 9 5.5 M6 28.5 22.5 33.5 27.5 38.5 32.5 43.5 37.5 50

32 31.5 28.5 8 10.5 34 10.5 5.5 M6 36.5 28.5 43.5 35.5 46 37.5 53 44.5 100

40 23 33 7.5 9.5 40 10.5 5.5 M6 38.5 29.5 44.5 36.5 47.5 39.5 54.5 46.5 100

50 25 41.5 8 10 50 13.5 7.5 M8 38.5 32.5 46.5 40.5 47.5 41.5 55.5 49.5 100

63 30 53 8 11 60 13.5 9.5 M10 39.5 34 47.5 42 51.5 46 59.5 54 100

80 33 69.5 11.5 11.5 77 16.5 11 M12 52 43 62 53 62.5 53.5 72.5 63.5 150

100 36.5 87.5 12 12 94 17 11 M12 57 48.5 69 60.5 71.5 63 83.5 75 150

Catalog 0900P-E

Dimensions Extra Low Profile Version

SWWrench Flats

KK

AM WH

KF Thread x Depth AF

WH

For special rod ends, specify “3” in model number and give desired WH, AM or AF and KK or KF (length dimensions in millimeters).

Jam nut is supplied when cylinder is ordered with Style 4 or Style 5 rod end.

*“R2 thru” not available on 12 and 16mm Bores.

Bore BG1 BG2 E E1 E2EE

EE1 HL I91 I92 L NB P1 P2BSPP NPTF

12 16.5 11.5 27 31 14 M5 – 1 8 3.5 3.5 26 5.5 25 9.5

16 17 12 31.5 35 16 M5 – 1.2 8 4 4 20 7 29.5 9.5

20 19 14,5 38.5 42.5 19,5 M5 – 1.3 10 4.5 4.5 20 8 35 13.5

25 21 15 41.5 45.5 21 M5 – 1.8 10 5 5 20 8.5 38.5 14

32 25 17 48 56 24 G1/8 1/8 2.7 10 4 4 25 9.5 45.5 16.5

40 25.5 17.5 56 62.5 28 G1/8 1/8 3.4 10 4 4 20 11.5 51 12

50 29.5 23.5 67 74.5 33.5 G1/8 1/8 4 14 5 5 20 14.5 63 54.5

63 34 28 82 86 40.5 G1/8 1/8 5 18 6.5 8 20 17.5 73.5 64

80 43 34 98 106.5 48.5 G1/4 1/4 5.5 22 8.5 10 20 25.5 92 79.5

100 44 35.5 119 126.5 59.5 G1/4 1/4 6 22 8.5 10 20 31.5 111.5 97.5

Style 5/Style 4 Style 6/Style 9

(Revised 04-30-12)


E10

C086


E

Catalog 0900P-E

Dimensions Long Bearing Version

RT

BG

HL HL

BG2ZH2 + Stroke

EE 2 Places

WH

PM

NB NB

E2

E1

E

R SQ.

24

ALL PORTINGCONFIGURATIONS

MOUNTING HOLE CONFIGURATIONBOTH PORTS HEAD


BOTH PORTS HEAD

Bores 12-50mm:(2) ØR2 Thru, 180° Apart. (4) ØR1 C'Bore;Bores 63-100mm:(4) ØR2 Thru, (8) ØR1 C'Bore

I92

ØR

2

ØR

1

Ø MM

I72 + Stroke

L° L°

I12

I9

OPTIONAL PORTING CONFIGURATIONS

MOUNTING HOLE CONFIGURATIONBOTH PORTS CAP OR CAP FACE,

PORTS AT HEAD & CAP

BG1

RT

BG

HL HL

BOTH PORTS CAP


ZH + Stroke

PL

EE 2 Places

WH

HEAD & CAP PORTED

BOTH PORTS CAP FACE

WH

ZH + Stroke


EE 2 Places

PL

ZH + Stroke

WH

PL


EE 2 Places

I7 + Stroke I7 + Stroke

P1P2

P3

P4

I7 + Stroke

ØR

1

ØR

2

I91I9

I12I12

I12

24

24


E11

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Dimensions Long Bearing Version

SWWrench Flats

KK

AM WH


WH

Style 5/Style 4 Style 6/Style 9

For special rod ends, specify “3” in model number and give desired WH, AM or AF and KK or KF (length dimensions in millimeters)..

Jam nut is supplied when Style 4 or Style 5 rod end is specified.

Note: Magnetic piston and longer rod bearing are standard with Long Bearing Version.

* “R2 thru” not available on 12 and 16mm Bores.

Bore Rod MM

AF AM KF KK WHI12 SW

Style 6 Style 9 Style 5 Style 4 Style 6 Style 9 Style 5 Style 4 Style 4, 9 & 6 Style 5

12 6 6 5.4 9 8 M3x0.5 #8-32 M5x0.8 #8-32 3.5 5 3 5

16 8 8 5.4 10 8 M4x0.7 #8-32 M6x1.0 #8-32 3.5 5.5 3 7

20 10 7 7 12 8 M5x0.8 #10-32 M8x1.25 #10-32 4.5 6.5 4 9

25 10 12 10 15 9.5 M6x1.0 1/4-28 M10x1.25 1/4-28 5 7.5 4 9

32 12 13 13.3 20.5 12.7 M8x1.25 5/16-24 M12x1.25 5/16-24 7 8 5 10

40 16 13 18.3 20.5 16 M8x1.25 3/8-24 M14x1.5 3/8-24 7 8 5.5 13

50 20 15 17.6 26 19.5 M10x1.5 1/2-20 M18x1.5 1/2-20 8 7.5 5.5 16

63 20 15 17.6 26 19.5 M10x1.5 1/2-20 M18x1.5 1/2-20 8 7.5 5.5 16

80 25 21 24.3 32.5 25.5 M16x2.0 5/8-18 M22x1.5 5/8-18 10 11 6 21

100 25 27 27 32.5 28.5 M20x2.5 3/4-16 M22x1.5 3/4-16 12 11 6 21

Bore BG BG1 BG2 E E1 E2EE

EE1 HL I7 I72 I9 I91 I92 LBSPP NPTF

12 21.5 16.5 11.5 27 31 14 M5 – 1 8 38.5 33.5 3.5 3.5 3.5 26

16 22 17 12 31.5 35 16 M5 – 1.2 8 40.5 35.5 5.5 4 4 20

20 24.5 19 14.5 38.5 42.5 19.5 M5 – 1.3 10 40 35.5 10.5 4.5 4.5 20

25 24.5 21 15 41.5 45.5 21 M5 – 1.8 10 42.5 36.5 10.5 5 5 20

32 27.5 25 17 48 56 24 G1/8 1 8 2.7 10 48 40 14 4 4 25

40 27.5 25.5 17.5 56 62.5 28 G1/8 1/8 3.4 10 49.5 41.5 14 4 4 20

50 31.5 29.5 23.5 67 74.5 33.5 G1/8 1/8 4 14 49.5 43.5 13 5 5 20

63 37 34 28 82 86 40.5 G1/8 1/8 5 18 54.5 49 6.5 6.5 8 20

80 43 43 34 98 106.5 48.5 G1/4 1/4 5.5 22 62.5 53.5 9.5 8.5 10 20

100 44 44 35.5 119 126.5 59.5 G1/4 1/4 6 22 71.5 63 9.5 8.5 10 20

Bore NB P1 P2 P3 P4 PM R R1 R2* RT ZH ZH2Min

StrokeMax

Stroke

12 5.5 25 9.5 13.5 13.5 8.5 15.5 5.8 3.5 M4 42 37 4 200

16 7 29.5 9.5 15.5 18 9 20 7.4 3.5 M4 44 39 4 200

20 8 35 13.5 24.5 21.5 9 25.5 9 5.5 M6 44.5 40 8 200

25 8.5 38.5 14 27.5 24.5 9 28 9 5.5 M6 47.5 41.5 8 200

32 9.5 45.5 16.5 31.5 28.5 10.5 34 10.5 5.5 M6 55 47 9 320

40 11.5 51 12 23 33 9.5 40 10.5 5.5 M6 56.5 48.5 7 320

50 14.5 63 54.5 25 41.5 10 50 13.5 7.5 M8 57.5 51.5 13 320

63 17.5 73.5 64 30 53 11 60 13.5 9.5 M10 62.5 57 18 500

80 25.5 92 79.5 33 69.5 11.5 77 16.5 11 M12 72.5 62.5 23 500

100 31.5 111.5 97.5 36.5 87.5 12 94 17 11 M12 83.5 75 18 500

(Revised 04-30-12)


E12

C086


E

Catalog 0900P-E

Dimensions – F Style Mounting

Foot Mounting – Style F

Bore Kit Part Number AB AH AJ AT AU E3 I7 K1 LY TR

12 P1M-4DMF 4.5 17 19.5 2 8 44 29.5 2.8 34 35

16 P1M-4FMF 4.5 19 19.5 2 8 48 33.5 2.8 38 39

20 P1M-4HMF 6.5 24 20.5 3.2 9.2 62 42 4 47 50

25 P1M-4JMF 6.5 26 22.5 3.2 10.7 66 46 4 50.5 52

32 P1M-4KMF 6.5 30 25 3.2 11.2 71 54 4 62 60

40 P1M-4LMF 6.5 33 25 3.2 11.2 78 61 4 67.5 67

50 P1M-4MMF 9 39 29.5 3.2 14.7 95 72.5 5 80 82

63 P1M-4NMF 11 46 31 3.2 16.2 113 32 5 91.5 100

80 P1M-4PMF 13 59 35 4.5 19.5 140 42 7 117 118

100 P1M-4QMF 13 71 39 6 23 162 53 7 138 139

WF

AU AUAT

K1

AJ SA 1-6* + Stroke

ZA 1-6* + Stroke

I7

TR

E3(4) - ØAB

AH

LY

KF x AF Deep(See Opposite Page)

Please note bearing, piston and porting configuration for selecting proper dimensions.

Bore

ELP Version Non-Magnetic ELP Version Magnetic Long Bearing VersionStyle 5

End Length Adjustment

Both Ports Head

Optional Porting Min. **

Stroke

Both Ports Head

Optional Porting Min.**

Stroke

Both Ports Head

OptionalPorting Min.**

StrokeSA1 ZA1* SA2* ZA2* SA3 ZA3* SA4 ZA4* SA5 ZA5* SA6 ZA6*

12 5 35.3 10 40.3 15 16 46.3 21 51.3 4 21.5 51.8 26.5 56.8 4 1.5

16 6.5 36.8 11.5 41.8 14 17.5 47.8 22.5 52.8 4 23.5 53.8 28.5 58.8 4 2

20 7.5 41.2 12 45.7 18 17.5 51.2 22 55.7 8 23.5 57.2 28 61.9 8 2

25 7.5 44.7 13.5 50.7 18 17.5 54.7 23.5 60.7 8 21.5 58.7 27.5 64.7 8 2.5

32 12.5 52.5 20.5 60.7 18 21.5 61.7 29.5 69.9 9 24 64 32 72.2 9 1

40 13.5 53.7 21.5 61.9 17 23.5 63.7 31.5 71.9 7 25.5 65.7 33.5 73.9 7 1

50 9.5 58.7 15.5 64.9 22 18.5 67.7 24.5 73.9 13 20.5 69.7 26.5 75.9 13 -0.5

63 8 60.2 13.5 65.7 30 20 72.2 25.5 77.7 18 23 75.2 28.5 80.7 18 -0.5

80 13 74.5 22 83.5 33 23.5 85 32.5 94 23 23.5 85 32.5 94 23 1

100 14.5 83.5 23 92 33 29 98 37.5 106.5 18 29 98 37.5 106.5 18 -1

* For strokes less than ‘Min. Stroke’, only one bracket will be supplied at rod end.** Dimensions shown apply only for Rod End Styles 4, 6 and 9. For Rod End Style 5, please include the above length adjustment.Note: Foot Bracket mounting is not available with cap face porting


E13

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

KF Thread xDepth AF

WF

W

WF

KF Thread xDepth AF

SWWrench FlatsKK

W

AM WF

SWWrench Flats

KK

AM WF

Bore Kit Part Number E FB MF R TF UF

ELP VersionNon-Magnetic

ELP VersionMagnetic

Long BearingVersion

Style 5 RodEnd LengthAdjustment

Both Ports Head

OptionalPorting

Both Ports Head

Optional Porting

Both Ports Head

Optional Porting

ZB1* ZB2* ZB3* ZB4* ZB5* ZB6*

12 P1M-4DMB 25 4.5 5.5 – 45 55 30.5 35.5 41.5 46.5 47 52 1.5

16 P1M-4FMB 30 4.5 5.5 – 45 55 32 37 43 48 49 54 2

20 P1M-4HMB 39 6.5 8 – 50.5 62 34 38.5 44 48.5 50 54.5 2

25 P1M-4JMB 42 6.5 8 – 53 65 37.5 43.5 47.5 53.5 51.5 57.5 2.5

32 P1M-4KMB 48 5.5 8 34 58 68 45.5 53.5 54.5 62.5 57 65 1

40 P1M-4LMB 54 5.5 8 40 66 76 46.5 54.5 56.5 64.5 58.5 66.5 1

50 P1M-4MMB 67 6.5 9 50 79 90 50.5 56.5 59.5 65.5 61.5 67.5 -0.5

63 P1M-4NMB 80 9 9 60 97 112 52 57.5 64 69.5 67 72.5 -0.5

80 P1M-4PMB 99 11 11 77 116 134 63 72 73.5 82.5 73.5 82.5 1

100 P1M-4QMB 117 11 11 94 137 154 70.5 79 85 93.5 85 93.5 -1

BoreAF AM KF KK W WF

SWStyle 9 Style 6 Style 4 Style 5 Style 9 Style 6 Style 4 Style 5 Styles

9, 6, 4 Style 5 Styles9, 6, 4 Style 5

12 5.4 6 8 9 #8-32 M3X0.5 #8-32 M5X0.8 8 9.5 13.5 15 5

16 5.4 8 8 10 #8-32 M4x0.7 #8-32 M6x1.0 8 10 13.5 15.5 7

20 7 7 8 12 #10-32 M5x0.8 #10-32 M8x1.25 6.5 8.5 14.5 16.5 9

25 10 12 9.5 15 1/4-28 M6x1.0 1/4-28 M10x1.25 7 9.5 15 17.5 9

32 13.3 13 12.7 20.5 5/16-24 M8x1.25 5/16-24 M12x1.25 9 10 17 18 10

40 18.3 13 16 20.5 3/8-24 M8x1.25 3/8-24 M14x1.5 9 10 17 18 13

50 17.6 15 19.5 26 1/2-20 M10x1.5 1/2-20 M18x1.5 9 8.5 18 17.5 16

63 17.6 15 19.5 26 1/2-20 M10x1.5 1/2-20 M18x1.5 9 8.5 18 17.5 16

80 24.3 21 25.5 32.5 5/8-18 M16x2.0 5/8-18 M22x1.5 9 10 20 21 21

100 27 27 28.5 32.5 3/4-16 M20x2.5 3/4-16 M22x1.5 11 10 22 21 21

Catalog 0900P-E

Dimensions – Style J Mounting

Bores 32-100mm Bores 12-25mm

Front Flange Mounting – Style JMF

WWF

ZB1-6* + Stroke

E R

TFUF

(4) ØFB

KF x AF Deep

* Dimensions shown apply only for Rod End Styles 4, 6 and 9. For Rod End Style 5, please include the above length adjustment.


For special rod threads, specify “3” in model number and give desired AM or AF, WF and KK or KF (length dimensions in millimeters)..

Rod End DimensionsFront Mounts F & J

Foot Mounting - Style F Foot Flange Mounting - Style JFoot Mounting - Style F Foot Flange Mounting - Style J

E

TF

UF

(2) ØFB

(Revised 04-30-12)


E14

C086


E

Bore Kit Part Number E FB MF R TF UF

12 P1M-4DMB 25 4.5 5.5 – 45 55

16 P1M-4FMB 30 4.5 5.5 – 45 55

20 P1M-4HMB 39 6.5 8 – 50.5 62

25 P1M-4JMB 42 6.5 8 – 53 65

32 P1M-4KMB 48 5.5 8 34 58 68

40 P1M-4LMB 54 5.5 8 40 66 76

50 P1M-4MMB 67 6.5 9 50 79 90

63 P1M-4NMB 80 9 9 60 97 112

80 P1M-4PMB 99 11 11 77 116 134

100 P1M-4QMB 117 11 11 94 137 154

Bore

ELP Version Non-Magnetic ELP Version Magnetic Long Bearing VersionStyle 5 RodEnd LengthAdjustment

Both Ports Head ZF1*

Optional Porting

ZF2*

Both Ports Head ZF3*

Optional Porting

ZF4*

Both Ports HeadZF5*

Optional Porting

ZF6*

12 26 31 37 42 42.5 47.5 1.5

16 27.5 32.5 38.5 43.5 44.5 49.5 2

20 32 36.5 42 46.5 48 52.5 2

25 35.5 41.5 45.5 51.5 49.5 55.5 2.5

32 43.5 51.5 52.5 60.5 55 63 1

40 44.5 52.5 54.5 62.5 56.5 64.5 1

50 49.5 55.5 58.5 64.5 60.5 66.5 -0.5

63 51 57.5 63 68.5 66 71.5 -0.5

80 64 73 74.5 83.5 74.5 83.5 1

100 71.5 80 86 94.5 86 94.5 -1

Catalog 0900P-E

Dimensions – Style H Mounting

ZF1-6* + StrokeMF

E R

TF

UF

(4) ØFBE

TF

UF

(2) ØFB

Bores 32-100mm Bores 12-25mm

Rear Flange Mounting – Style H


Note: Rear Flange mounting is not available with cap face porting.* Dimensions shown apply only for Rod End Styles 4, 6 and 9.For Rod End Style 5, please include the above length adjustment.


E15

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Bore

ELP Version Non-Magnetic ELP Version Magnetic Long Bearing VersionStyle 5 Rod End LengthAdjustment

Both PortsHeadXD1*

OptionalPorting

XD2*

Both PortsHeadXD3*

OptionalPorting

XD4*

Both PortsHeadXD5*

OptionalPorting

XD6*

12 34.5 39.5 45.5 50.5 51 56 1.5

16 37 42 48 53 54 59 2

20 42 46.5 52 56.5 58 62.5 2

25 47.5 53.5 57.5 63.5 61.5 67.5 2.5

32 55.5 63.5 64.5 72.5 67 75 1

40 59.5 66.5 68.5 76.5 70.5 78.5 1

50 68.5 74.5 77.5 83.5 79.5 85.5 -0.5

63 72 78.5 84 89.5 87 92.5 -0.5

80 91 100 101.5 110.5 101.5 110.5 1

100 105.5 114 120 128.5 120 128.5 -1

Bore Double Clevis KitPart Number

Single Clevis KitPart Number** CB CD/EK EW F FL L MR O UB

12 P1M-4DMT P1M-4DME 5 5 5 4 14 10 6.5 14.5 10

16 P1M-4FMT P1M-4FME 6.5 5 6.5 4 15 11 6.5 16.5 12

20 P1M-4HMT P1M-4HME 8 8 8 5 18 13 10 21 16

25 P1M-4JMT P1M-4JME 10 10 10 5 20 15 11 25.5 20

32 P1M-4KMT P1M-4KME 18 10 18 5 20 15 10 41.5 36

40 P1M-4LMT P1M-4LME 18 10 18 6 22 16 10 41.5 36

50 P1M-4MMT P1M-4MME 22 14 22 7 28 21 14 50.5 44

63 P1M-4NMT P1M-4NME 22 14 22 8 30 22 14 50.5 44

80 P1M-4PMT P1M-4PME 28 18 28 10 38 28 18 64 56

100 P1M-4QMT P1M-4QME 32 22 32 13 45 32 22 72 64

Catalog 0900P-E

Dimensions

ØCD

MR

L

FL

XD1-6* + Stroke

FO

CB

UB

ØEK h9

Style A Style B

Rear Clevis Mounts – Styles A & B


* Dimensions shown apply only for Rod End Styles 4, 6 and 9. For Rod End Style 5, please include the above length adjustment.** Single Clevis Kit can be used as mounting bracket for double clevis cylinders. Double Clevis Kit can be used as mounting kit for single clevis cylinders.Note: Rear Clevis mounts are not available with cap face port.

EW


E16

C086


E

Catalog 0900P-E

Double Rod Style C and J

Style C

Heads Ported at Each End or One EndRefer to “Single Rod” (pages E6-E9) for dimensions not listed below. Both rods will be supplied with same rod ends unless called out as special.

Style J

Bore

Basic Cylinder – Style C

ELP Version Non-Magnetic ELP Version Magnetic Long Bearing Version

K51 XH2 ZH7Min.

Stroke K71 XH1 ZH6Min.

Stroke I75 XH ZH5Min.

Stroke

12 22 29 25.5 15 40 47 43.5 5 45.5 52.5 49 5

16 23.5 30.5 27 14 40 47 43.5 5 46.5 53.5 50 5

20 24 33 28.5 18 38 47 42.5 8 46.5 55.5 51 8

25 28.5 38.5 33.5 18 38.5 48.5 43.5 8 46.5 56.5 51.5 8

32 36.5 50.5 43.5 18 46 60 53 9 50.5 64.5 57.5 9

40 37.5 51.5 44.5 17 47.5 61.5 54.5 14 51.5 65.5 58.5 12

50 38.5 54.5 46.5 22 47.5 63.5 55.5 20 51.5 67.5 59.5 20

63 39.5 55.5 47.5 30 51.5 67.5 59.5 20 57.5 73.5 65.5 20

80 52 72 62 33 62.5 82.5 72.5 25 62.5 82.5 72.5 25

100 57 81 69 33 71.5 95.5 83.5 25 71.5 95.5 83.5 25


Bore

Flange Mounting – Style J Rod End Dimensions

ELP Version Non-Magnetic ELP Version Magnetic Long Bearing Version WF WH

XH6 ZB7Min.*

Stroke XH7 ZB8Min.*

Stroke XH8 ZB9Min.*

StrokeStyles4, 6, 9 Style 5 Styles

4, 6, 9 Style 5

12 39 35.5 5 57 53.5 5 62.5 59 5 13.5 15 3.5 5

16 40.5 37 5 57 53.5 5 63.5 60 5 13.5 15.5 3.5 5.5

20 43 38.5 8 57 52.5 8 65.5 61 8 14.5 16.5 4.5 6.5

25 48.5 43.5 18 58.5 53.5 8 66.5 61.5 8 15 17.5 5 7.5

32 60.5 53.5 18 70 62.5 9 74.5 67.5 9 17 18 7 8

40 61.5 54.5 17 71,5 64.5 14 75.5 68.5 12 17 18 7 8

50 64.5 56.5 22 73.5 65.5 20 77.5 69.5 20 18 17.5 8 7.5

63 65.5 57.5 30 77.5 69.5 20 83.5 75.5 20 18 17.5 8 7.5

80 82 72 33 92.5 82.5 25 92.5 82.5 25 20 21 10 11

100 91 79 33 105.5 93.5 25 105.5 93.5 25 22 21 12 11

* Note: Please consult factory for cylinders that require shorter than minimum stroke length listed above.

WH WH + Stroke

I75 / K51 / K71*+ Stroke

ZH5-7* + Stroke

XH / XH1 / XH2* + 2x Stroke

WF WH + Stroke

ZB7-9* + Stroke

XH6-8* + 2x Stroke

Basic Cylinder – Style CFlange Mounting – Style J


E17

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Double Rod Style F

Style F

BoreELP Version Non-Magnetic ELP Version Magnetic Long Bearing Version

SA7 XH3Min.*

Stroke SA8 XH4Min.*

Stroke SA9 XH5Min.*

Stroke

12 10 49 5 28 67 5 33.5 72.5 5

16 11.5 50.5 5 28 67 5 34.5 73.5 5

20 12 53 8 26 67 8 34.5 75.5 8

25 13.5 58.5 8 23.5 68.5 5 31.5 76.5 8

32 20.5 70.5 8 29.5 80 5 34.5 84.5 9

40 21.5 71.5 7 31.5 81.5 5 35.5 85.5 12

50 15.5 74.5 12 24.5 83.5 10 28.5 87.5 20

63 13.5 75.5 20 25.5 87.5 10 31.5 93.5 20

80 22 92 23 32.5 102.5 15 32.5 102.5 25

100 23 101 23 37.5 115.5 15 37.5 115.5 25


Bore

Rod End Dimensions

WF WH

Styles4, 6, 9

Style 5

Styles4, 6, 9

Style5

12 13.5 15 3.5 5

16 13.5 15.5 3.5 5.5

20 14.5 16.5 4.5 6.5

25 15 17.5 5 7.5

32 17 18 7 8

40 17 18 7 8

50 18 17.5 8 7.5

63 18 17.5 8 7.5

80 20 21 10 11

100 22 21 12 11

WF WF + Stroke

SA7-9*+ Stroke

XH3-5* + 2x Stroke

* Note: Please consult factory for cylinders that require shorter than minimum stroke length listed above.

Foot Mounting – Style F

Heads Ported at Each End or One EndRefer to “Single Rod” (pages E6-E9) for dimensions not listed below. Both rods will be supplied with same rod ends unless called out as special.


E18

C086


E

Catalog 0900P-E

Rod End Accessories

O

CL

CM

ØE

K

ER

LE

CE

KK Th'd x A DepthE

Rod Clevis – Metric

Bore Kit Part Number A E CE KK ER LE EK (h9) CM CL O

12 P1M-4DRC 7 9.5 16 M5x0.8 6.5 7 5 5 9.5 14.5

16 P1M-4FRC 11 11 21 M6x1.0 8 10 5 6.5 11 16.5

20 P1M-4HRC 8.5 16 25 M8x1.25 10.5 11.5 8 8 16 21

25 P1M-4JRC 10.5 19 30 M10x1.25 13 14 10 10 19 25.5

32 P1M-4KRC 16 22 Dia. 30 M12x1.25 12 14 10 18 36 41.5

40 P1M-4LRC 16 22 Dia. 30 M14x1.5 12 14 10 18 36 41.5

50/63 P1M-4MRC 20 28 Dia. 40 M18x1.5 16 20 14 22 44 50.5

80 P1M-4PRC 23 38 Dia. 50 M22x1.5 21 27 18 28 56 64

100 P1M-4QRC 24 44 Dia. 55 M22x1.5 24 31 22 32 64 72

Rod Clevis – Inch

BoreKit Part Number

A E CE KK ER LE EK (inch)

+0, -0.002CM

CL(inch)

O(inch)

12 P1M-4DRC-T 6 9.5 16 #8-32 6.5 7 3/16 5 0.375 0.563

16 P1M-4FRC-T 6 11 21 #8-32 8 10 3/16 6.5 0.437 0.625

20 P1M-4HRC-T 6 16 25 #10-32 10.5 11.5 5/16 8 0.625 0.875

25 P1M-4JRC-T 8 19 30 1/4-28 13 14 3/8 10 0.750 1.031

32 P1M-4KRC-T 16 22 Dia. 30 5/16-24 12 14 3/8 18 1.437 1.687

40 P1M-4LRC-T 16 22 Dia. 30 3/8-24 12 14 3/8 18 1.437 1.687

50/63 P1M-4MRC-T 20 28 Dia. 40 1/2-20 16 20 1/2 22 1.750 2.125

80 P1M-4PRC-T 23 38 Dia. 50 5/8-18 21 27 3/4 28 2.250 2.625

100 P1M-4QRC-T 24 44 Dia. 55 3/4-16 24 31 7/8 32 2.500 2.875

Jam Nut for Style 5

Dimensions in mm

BoreSize Part Number KK M S

12 L073800080 #8-32 1/8 11/32

16 L073800080 #8-32 1/8 11/32

20 L073800100 #10-32 1/8 3/8

25 L073800200 1/4-28 5/32 7/16

32 L073800300 5/16-24 3/16 1/2

40 L073800400 3/8-24 7/32 9/16

50 L073800600 1/2-20 5/16 3/4

63 L073800600 1/2-20 5/16 3/4

80 L073800800 5/8-18 3/8 15/16

100 L073800900 3/4-16 27/64 1-1/8

Jam Nut for Style 4

Dimensions in inches

S M

KK

BoreSize Part Number KK M S

12 L075540005 M5x0.8 2.7 18

16 L075540006 M6x1.0 3.2 10

20 L075540008 M8x1.25 4 13

25 L075540010 M10x1.25 5 17

32 L075540012 M12x1.25 6 19

40 L075540014 M14x1.5 7 22

50 L075540018 M18x1.5 8 27

63 L075540018 M18x1.5 8 27

80 L075540022 M22x1.5 11 32

100 L075540022 M22x1.5 11 32

Rod Clevis

Jam Nuts


E19

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

EKK Th'd x A Depth

EM

ØC

K

ER

LE

CA

E

Rod Eye – Metric

Bore Kit Part Number A E CA KK ER LE CK EM

12 P1M-4DRE 7 9.5 Sq. 16 M5x0.8 6.5 7 5 5

16 P1M-4FRE 8 11 Sq. 25 M6x1.0 8 14 5 6.5

20 P1M-4HRE 8.5 16 Sq. 25 M8x1.25 10.5 11.5 8 8

25 P1M-4JRE 10.5 19 Sq. 30 M10x1.25 13 14 10 10

32 P1M-4KRE 15 22 Dia. 30 M12x1.25 12 14 10 18

40 P1M-4LRE 14 22 Dia. 30 M14x1.5 12 14 10 18

50/63 P1M-4MRE 18.5 28 Dia. 40 M18x1.5 16 20 14 22

80 P1M-4PRE 22 38 Dia. 50 M22x1.5 21 27 18 28

100 P1M-4QRE 22 44 Dia. 55 M22x1.5 24 31 22 32

Rod Eye – Inch

Bore Kit Part Number A E CA KK ER LE CK

(inch) EM

12 P1M-4DRE-T 6 9.5 Sq. 16 #8-32 6.5 7 3/16 5

16 P1M-4FRE-T 6 11 Sq. 25 #8-32 8 14 3/16 6.5

20 P1M-4HRE-T 6 16 Sq. 25 #10-32 10.5 11.5 5/16 8

25 P1M-4JRE-T 8 19 Sq. 30 1/4-28 13 14 3/8 10

32 P1M-4KRE-T 12 22 Dia. 30 5/16-24 12 14 3/8 18

40 P1M-4LRE-T 11 22 Dia. 30 3/8-24 12 14 3/8 18

50/63 P1M-4MRE-T 18 28 Dia. 40 1/2-20 16 20 1/2 22

80 P1M-4PRE-T 21 38 Dia. 50 5/8-18 21 27 3/4 28

100 P1M-4QRE-T 21 44 Dia. 55 3/4-16 24 31 7/8 32

Catalog 0900P-E

Rod End Accessories

Rod Eye


E20

C086


E

Catalog 0900P-E

Service Kits

BoreSingle Rod Cylinders Double Rod Cylinders

Class 1 Seals Class 5 Seals* Class 1 Seals Class 5 Seals*

12 P1M-6DRN P1M-6DRV P1M-6DRT P1M-6DRP

16 P1M-6FRN P1M-6FRV P1M-6FRT P1M-6FRP

20 P1M-6HRN P1M-6HRV P1M-6HRT P1M-6HRP

25 P1M-6JRN P1M-6JRV P1M-6JRT P1M-6JRP

32 P1M-6KRN P1M-6KRV P1M-6KRT P1M-6KRP

40 P1M-6LRN P1M-6LRV P1M-6LRT P1M-6LRP

50 P1M-6MRN P1M-6MRV P1M-6MRT P1M-6MRP

63 P1M-6NRN P1M-6NRV P1M-6NRT P1M-6NRP

80 P1M-6PRN P1M-6PRV P1M-6PRT P1M-6PRP

100 P1M-6QRN P1M-6QRV P1M-6QRT P1M-6QRP

* No Bumpers Included


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

P1M Series Tooling Plate Extra Low Profile Pneumatic Cylinder

ContentsFeatures / Benefits ............................................................E22Ordering Information......................................................... E23Cylinder Specifications ......................................................E24Performance Data ...................................................... E25-E27

Dimensions ................................................................ E28-E31Mounting Dimensions ................................................ E32-E33Double Rod Style Dimensions ................................... E34-E35Mounting and Service Kits .................................................E36

Tooling Plate Cylinder P1M Series

E22

C086


E

Catalog 0900P-E

Features and Benefits

Flush Sensor Grooveprovides protection anda “clean” design.

Three piece bolted constructionallows for quick servicing.

Internal Transfer Tube allows forflexible porting, providing space savings.

NPT, BSPP, or BSPT Portsoffer flexibility.

Standard and custommounting hole configurationavailable.Anodized, smooth aluminum construction

provides superior corrosion resistance.

“Long Bearing” and Magnetic Piston providemaximum bearing support for increasedload carrying capability.

P1M Series Tooling Plate Flexible Porting Options

Double Rod, Both Ports Cap (Radial)

Both Ports Head* Head and Cap Ported (Radial)

Double Rod, Both Ports Head*

Double Rod, Head and Cap Ported (Radial)

To retract cylinder, apply air to port #2.

To extend cylinder, apply air to port #4.

* Both Ports Head [BSPP ports (M5) for 12-25mm bores and 1/8" NPTF ports for 32-50mm bores] is the standard porting configuration for the P1M Tooling Plate Cylinder. Alternate porting options are available at an additional cost.

2

4

ROD END #1 ROD END #2

2

4 4

2

42

2

4

ROD END #1

2

4

ROD END #2

ROD END #1 ROD END #2

2

4

Both Ports Cap Face(Axial)

Both Ports Cap (Radial)

Tooling Plate CylinderP1M Series

E23

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E


P1M

How to Order P1M Series Tooling Plate Cylinders

1 Porting options K, P, and T are not available with rear mountings.

2 When selecting the mount, stroke lengths below 10mm will not receive a head foot bracket.

3 Special Tooling Pate configuration.

4 When ordering double rod style cylinders, please be clear as to which end of the cylinder the tooling plate is to be incorporated as related to porting. The standard rod end configuration for Rod End # 2 (Non Tooling Plate end) is a designator # 6, metric female. Alternate rod ends are available and please consult Section A, P1M Cylinders for how to order.

5 Bumpers for this option are polyurethane. Piston, rod, and body end seals are fluorocarbon. Please review the following specification page for additional information.

6 For information regarding sensors, please refer to Electronic Sensors section.

7 Not available for 12-25mm bores.

Minimum / Maximum Stroke Lengths (mm)

Bore Size

Minimum Stroke Maximum Stroke

Single Rod Double Rod Single or Double Rod

12 5 5 60

16 5 5 70

20 5 8 85

25 5 8 85

32 5 9 100

40 5 12 100

50 5 20 100

C F D M A 6 N

Cylinder Style

C Basic, no mountings

H Rear Flange 1

F Foot Mount 2

Cylinder Option

F Guided Tool Plate

G Special MTO Tooling Plate 3

B Blank Tooling Plate

Function

D Double Acting

K Double Acting, Double Rod 4

Stroke in mm

Port Type & Location

BSPP

G Head & Cap Radial

H Both in Head

J Both in Cap Radial

K Both in Cap Axial

NPTF 7

N Head & Cap Radial

M Both in Head

L Both in Cap Radial

P Both in Cap Axial

BSPT 7

Q Head & Cap Radial

R Both in Head

S Both in Cap Radial

T Both in Cap Axial

Rod Threads

6 Metric Female

3 Special 4


A Long Bearing Stainless Steel Rod (standard for 12-25mm bores)

C Long Bearing Chrome Plated Rod (N/A for 12-25mm bores)

Bumpers, Magnets, Seals

B Std. Seals, Bumpers, No Magnet

F Fluorocarbon Seals, Bumpers 5, No Magnet

M Std. Seals, Bumpers, Magnetic Piston 6

Bore Size 012 12mm

016 16mm

020 20mm

025 25mm

032 32mm

040 40mm

050 50mm

032 020


E24

C086


E

Catalog 0900P-E

Specifications

Cylinder Specifications• Bore Sizes: 12, 16, 20, 25, 32, 40 and 50mm

• Maximum Operating Pressure: 10 Bar or 145 PSI

• Standard Operating Temperature: -20°C to +80°C, -4°F to +176°F

• Optional (limited exposure) High Temperature: -10°C to +121°C, +14°F to +250°F

Material Specifications• Piston Rod and Guide Rods: Hard Chrome Plated Steel, 100,000 PSI Yield (303 Stainless Steel standard on 12-25mm bores)

• Piston Rod Seal: Polyurethane

• Piston Rod Bearing: Multilayer PTFE with Steel Backing

• Tooling Plate Guide Rod Bearing: Multilayer PTFE with Steel Backing

• End Covers: Black Anodized Aluminum

• Assembly and Tooling Plate Fasteners: Stainless Steel / Zinc Plated Steel

• O-Rings: Nitrile Rubber, NBR

• Cylinder Body: Clear Anodized Aluminum

• Piston: Aluminum Alloy

• Piston Seal: Nitrile Rubber, NBR

• Magnet: Plastic Coated Magnetic Material

• Bumpers: Polyurethane (12-25mm bores) or Hytrel® (32-50mm bores)

High Temperature/Chemical CompatibilitySeal Option Material*• O-Rings: Fluorocarbon, FPM

• Piston Rod Seal: Fluorocarbon, FPM

• Piston Seal: Fluorocarbon, FPM

• Bumpers: Polyurethane (12-25mm bores) or Hytrel® (32-50mm bores)* Option intended for limited exposure to elevated temperatures over

80°C, or 176°F. Option is primarily for applications which subject the cylinder to fluids and or chemicals that have an adverse effect on external seals. If continued exposure to elevated temperatures is required, please consult the Actuator Division for alternative options.

Hytrel® is a registered trademark of DuPont.

Forces, Weights, Air Consumption

Bore(mm)

Area(cm2)

Piston Rod ExtendForce*

(N)

RetractForce*

(N)

Weight AirConsumption**

(Liters)Dia.

(mm)Area (cm2)

Zero Stroke (kg)

Per 10mmStroke (kg)

12 1.1 6 0.3 68 51 0.073 0.020 0.013916 2.0 8 0.5 121 90 0.106 0.026 0.024620 3.1 10 0.8 188 141 0.184 0.040 0.038525 4.3 10 0.8 295 247 0.216 0.042 0.063332 8.0 12 1.1 483 415 0.314 0.052 0.105040 12.6 16 2.0 754 633 0.438 0.068 0.162050 19.6 20 3.1 1178 990 0.737 0.097 0.2530

*Theoretical cylinder force at 600 kPa (6 Bar).

**Free air consumption per 10mm stroke length for an extend and retract stroke at 600 kPa (6 Bar).


E25

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

The following graphs represent maximum loading capacities for the standard piston option. Use of the standard piston option provides space savings by reducing the piston thickness, thus reducing overall length. Please review the following graphs to determine if the application load falls into acceptable operating

ranges. In the event that the induced load falls out of the acceptable operating range, you may either increase the bore size or incorporate a magnetic piston for increased load capacity. For information regarding magnetic piston load carrying capability, please review the following page.

Catalog 0900P-E

Performance Data

(SIDE LOAD)

P1M Series Tooling Plate Performance Data – Standard Piston

(MOMENT)OR

Side Load Capacity (Standard Piston)

0

1

2

3

4

5

5 15 25 35 45 55 65 75 85 95

Stroke Length (mm)

12mm Bore

16mm Bore

20mm Bore

25mm Bore

32mm Bore

40mm Bore

50mm Bore

Sid

e L

oad

(K

g-F

orc

e)

Moment Load Capacity

0.00

0.20

0.40

0.60

0.80

1.00

1.20

1.40

5 15 25 35 45 55 65 75 85 95

Stroke Length (mm)

12mm Bore

16mm Bore

20mm Bore

25mm Bore

32mm Bore

40mm Bore

50mm Bore

Mo

men

t (N

-m)


E26

C086


E

Catalog 0900P-E

Performance Data

P1M Series Tooling Plate Performance Data – Magnetic Piston

(SIDE LOAD)

(MOMENT)

OR

Side Load Capacity (Magnetic Piston)

0

2

4

6

8

10

5 15 25 35 45 55 65 75 85 95

Stroke Length (mm)

12mm Bore

16mm Bore

20mm Bore

25mm Bore

32mm Bore

40mm Bore

50mm Bore

Moment Load Capacity

0.00

0.20

0.40

0.60

0.80

1.00

1.20

1.40

5 15 25 35 45 55 65 75 85 95

Stroke Length (mm)

12mm Bore

16mm Bore

20mm Bore

25mm Bore

32mm Bore

40mm Bore

50mm Bore

Mo

men

t (N

-m)


E27

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

The following graph represents typical tooling plate deflection for P1M Tooling Plate Cylinders. The amount of tooling plate deflection is dependent on induced application load and the working stroke length of the

cylinder. Depicted deflection is typical of a cylinder operating within the allowable side load and maximum allowable moment ranges per a given bore size and piston option.

Catalog 0900P-E

Performance Data

P1M Series Tooling Plate Performance Data – Tooling Plate Deflection

DEFLECTION

0.10

0.20

0.30

0.40

0.50

0.60

0.70

0.80

5 15 25 35 45 55 65 75 85 95

Stroke Length (mm)

12&16mm Bore

20mm Bore

25mm Bore

32&40mm Bore

50mm BoreDef

lect

ion

(m

m)

Tooling Plate Deflection


E28

C086


E

* Both Ports Head [BSPP ports (M5) for 12-25mm bores and 1/8" NPTF ports for 32-50mm bores] is the standard porting configuration for the P1M Tooling Plate Cylinder. Alternate porting options are available at an additional cost.

Catalog 0900P-E

Dimensions – Both Ports Head

VIEW A-AVIEW B-B

A

A B

B

ØEEEE1 (ORIFICE Ø)

(2 PLACES)

L° L°

RT(2 PLACES)

RT

BG2

HL

PMWH

I79 (I78) + STROKE

T9 (T8) + STROKE

ZH9 (ZH8) + STROKE

SW

SF(2 PLACES)

NB NB

E2

E1

R SQ.E

I92

S

W

WUSQ.

Y(2 PLACES

180° APART)

ØZ(2 PLACESALL BORES180° APART)

QSQ.

ØZ(2 PLACES

ONLY 32-50mm BORES 180° APART)

MOUNTING HOLE CONFIGURATION(2 PLACES)

Both Ports Head*

Bore BG2 E E1 E2EE

EE1 HL L NB PM R RTBSPP BSPT NPTF

12 11.5 27 31 14 M5 — — 1 8 26 5.5 8.5 15.5 M4x0.7

16 12 31.5 35 16 M5 — — 1.2 8 20 7 9 20 M4x0.7

20 14.5 38.5 42.5 19.5 M5 — — 1.3 10 20 8 9 25.5 M6x1.0

25 15 41.5 45.5 21 M5 — — 1.8 10 20 8.5 9 28 M6x1.0

32 17 48 56 24 G1/8 Rc 1/8 1/8 2.7 10 25 9.5 10.5 34 M6x1.0

40 17.5 56 62.5 28 G1/8 Rc 1/8 1/8 3.4 10 20 11.5 9.5 40 M6x1.0

50 21.5 67 74.5 33.5 G1/8 Rc 1/8 1/8 4 12 20 14.5 10 50 M8x1.25

Bore I92 S SF SW U Q W WH Y ZStandard Piston Magnetic Piston

I79 T9 ZH9 I78 T8 ZH8

12 3.5 6 4 5 25.4 20 14 3.5 M3x0.5 4.1 24 33.5 27.5 34.9 44.4 38.4

16 4 6 4 7 28.6 20 20 3.5 M3x0.5 4.1 26.2 35.7 29.7 37.1 46.6 40.6

20 4.5 6.9 7 9 34.9 26 27 4.5 M4x0.7 4.1 27.8 39.2 32.3 37.7 49.1 42.2

25 5 8.3 7 9 39 26 27 5 M4x0.7 4.1 28.8 42.1 33.8 38.7 52 43.7

32 4 8.3 7 10 44.5 32 30 7 M4x0.7 5.2 31.9 47.2 38.9 41 56.3 48

40 4 8.3 7 13 50.8 32 30 7 M4x0.7 5.2 32.6 47.9 39.6 42.5 57.8 49.5

50 5 12.1 9 16 63.5 38 42.8 8 M5x0.8 6.4 35.4 55.5 43.4 44.3 64.4 52.3


E29

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Dimensions – Head and Cap Ported (Radial)

VIEW B-B

A

A B

B


(2 PLACES)

L° L°

RT(2 PLACES)

PM PLWH

I74 (I77) + STROKE

ZH4 (ZH7) + STROKE

T4 (T7) + STROKEBG1

HL

RT

SF(2 PLACES)

SW

NB NB

E2

E1

R SQ.

I91

S


VIEW A-A

E

W

WUSQ


Y(2 PLACES

180° APART)

QSQ

ØZ(2 PLACES

ONLY 32-50mm BORES 180° APART)

Head and Cap Ported (Radial

Bore BG1 E E1 E2EE

EE1 HL L NB PL PM R RTBSPP BSPT NPTF

12 16.5 27 31 14 M5 — — 1 8 26 5.5 5 8.5 15.5 M4x0.7

16 17 31.5 35 16 M5 — — 1.2 8 20 7 5 9 20 M4x0.7

20 19 38.5 42.5 19.5 M5 — — 1.3 10 20 8 5 9 25.5 M6x1.0

25 21 41.5 45.5 21 M5 — — 1.8 10 20 8.5 7 9 28 M6x1.0

32 25 48 56 24 G1/8 Rc 1/8 1/8 2.7 10 25 9.5 8 10.5 34 M6x1.0

40 25.5 56 62.5 28 G1/8 Rc 1/8 1/8 3.4 10 20 11.5 7.5 9.5 40 M6x1.0

50 27.6 67 74.5 33.5 G1/8 Rc 1/8 1/8 4 12 20 14.5 8 10 50 M8x1.25


I74 T4 ZH4 I77 T7 ZH7

12 3.5 6 4 5 25.4 20 14 3.5 M3x0.5 4.1 29 38.5 32.5 39.9 49.4 43.4

16 4 6 4 7 28.6 20 20 3.5 M3x0.5 4.1 31.2 40.7 34.7 42.1 51.6 45.6

20 4.5 6.9 7 9 34.9 26 27 4.5 M4x0.7 4.1 32.3 43.7 36.8 42.2 53.6 46.7

25 5 8.3 7 9 39 26 27 5 M4x0.7 4.1 34.8 48.1 39.8 44.7 58 49.7

32 4 8.3 7 10 44.5 32 30 7 M4x0.7 5.2 39.9 55.2 46.9 49 64.3 56

40 4 8.3 7 13 50.8 32 30 7 M4x0.7 5.2 40.6 55.9 47.6 50.5 65.8 57.5

50 5 12.1 9 16 63.5 38 42.8 8 M5x0.8 6.4 41.4 61.5 49.4 50.3 70.4 58.3


E30

C086


E

Catalog 0900P-E

Dimensions – Both Ports Cap (Radial)

VIEW B-B

A

A B

B


(2 PLACES)

L° L°

RT(2 PLACES)

BG1

RT

HL

PLWH

I76 (I77) + STROKE

ZH76 (ZH7) + STROKE

T76 (T7) + STROKE

SF(2 PLACES)

SW

NB NB

E1

E2

R SQ.

I91

S


VIEW A-A

E

W

WUSQ.

QSQ.


Y(2 PLACES

180° APART)

ØZ(2 PLACES

ONLY BORES 32-50180° APART)

Both Ports Cap (Radial)

Bore BG1 E E1 E2EE

EE1 HL L NB PL R RTBSPP BSPT NPTF

12 16.5 27 31 14 M5 — — 1 8 26 5.5 5 15.5 M4x0.7

16 17 31.5 35 16 M5 — — 1.2 8 20 7 5 20 M4x0.7

20 19 38.5 42.5 19.5 M5 — — 1.3 10 20 8 5 25.5 M6x1.0

25 21 41.5 45.5 21 M5 — — 1.8 10 20 8.5 7 28 M6x1.0

32 25 48 56 24 G1/8 Rc1/8 1/8 2.7 10 25 9.5 8 34 M6x1.0

40 25.5 56 62.5 28 G1/8 Rc1/8 1/8 3.4 10 20 11.5 7.5 40 M6x1.0

50 27.6 67 74.5 33.5 G1/8 Rc1/8 1/8 4 12 20 14.5 8 50 M8x1.25


I76 T76 ZH76 I77 T7 ZH7

12 3.5 6 4 5 25.4 20 14 3.5 M3x0.5 4.1 29 38.5 32.5 39.9 49.4 43.4

16 4 6 4 7 28.6 20 20 3.5 M3x0.5 4.1 31.2 40.7 34.7 42.1 51.6 45.6

20 4.5 6.9 7 9 34.9 26 27 4.5 M4x0.7 4.1 32.3 43.7 36.8 42.2 53.6 46.7

25 5 8.3 7 9 39 26 27 5 M4x0.7 4.1 34.8 48.1 39.8 44.7 58 49.7

32 4 8.3 7 10 44.5 32 30 7 M4x0.7 5.2 39.9 55.2 46.9 49 64.3 56

40 4 8.3 7 13 50.8 32 30 7 M4x0.7 5.2 40.6 55.9 47.6 50.5 65.8 57.5

50 5 12.1 9 16 63.5 38 42.8 8 M5x0.8 6.4 41.4 61.5 49.4 50.3 70.4 58.3


E31

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Dimensions – Both Ports Cap Face (Axial)

VIEW B-B

A

A B

B

RT(2 PLACES)


(2 PLACES)

BG1

HL

RT

WH

I76 (I77) +STROKE

ZH76 (ZH7) + STROKE

T76 (T7) + STROKE

SF(2 PLACES)

SW

P4

P3

P2P1

R SQ.

I91

S


VIEW A-A

E

E1

E2

Y(2 PLACES

180° APART)ØZ

(2 PLACESALL BORES180° APART)

W

WUSQ.

QSQ.

ØZ(2 PLACES

ONLY BORES 32-50mm180° APART)

Both Ports Cap Face (Axial)

Bore BG1 E E1 E2EE

EE1 HL P1 P2 P3 P4 R RTBSPP BSPT NPTF

12 16.5 27 31 14 M5 — — 1 8 25 9.5 13.5 13.5 15.5 M4x0.7

16 17 31.5 35 16 M5 — — 1.2 8 29.5 9.5 15.5 18 20 M4x0.7

20 19 38.5 42.5 19.5 M5 — — 1.3 10 35 13.5 24.5 21.5 25.5 M6x1.0

25 21 41.5 45.5 21 M5 — — 1.8 10 38.5 14 27.5 24.5 28 M6x1.0

32 25 48 56 24 G1/8 Rc1/8 1/8 2.7 10 45.5 16.5 31.5 28.5 34 M6x1.0

40 25.5 56 62.5 28 G1/8 Rc1/8 1/8 3.4 10 51 12 23 33 40 M6x1.0

50 27.6 67 74.5 33.5 G1/8 Rc1/8 1/8 4 12 63 54.5 25 41.5 50 M8x1.25


I76 T76 ZH76 I77 T7 ZH7

12 3.5 6 4 5 25.4 20 14 3.5 M3x0.5 4.1 29 38.5 32.5 39.9 49.4 43.4

16 4 6 4 7 28.6 20 20 3.5 M3x0.5 4.1 31.2 40.7 34.7 42.1 51.6 45.6

20 4.5 6.9 7 9 34.9 26 27 4.5 M4x0.7 4.1 32.3 43.7 36.8 42.2 53.6 46.7

25 5 8.3 7 9 39 26 27 5 M4x0.7 4.1 34.8 48.1 39.8 44.7 58 49.7

32 4 8.3 7 10 44.5 32 30 7 M4x0.7 5.2 39.9 55.2 46.9 49 64.3 56

40 4 8.3 7 13 50.8 32 30 7 M4x0.7 5.2 40.6 55.9 47.6 50.5 65.8 57.5

50 5 12.1 9 16 63.5 38 42.8 8 M5x0.8 6.4 41.4 61.5 49.4 50.3 70.4 58.3


E32

C086


E

Catalog 0900P-E

Dimensions – Foot Mounted

VIEW B-BVIEW A-A

B

BA

A

(4) - ØAB

I7

E3

LY

WF

AU AU

K1AT

TR

AT

RSQ.

AJ

S

W

AH

USQ.

W QSQ.

SA2 (SA3) + STROKE

ZA2 (ZA3) + STROKE

TA2 (TA3) + STROKE

Note: Stroke lengths below 10mm do not receive a head foot bracket. Corner thru holes cannot be used with Foot Mount if fasteners are inserted from Tooling Plate inside face (interference).

Foot Mount

Bore AB AH AJ AT AU E3 I7 K1 LY R S TR WF

12 4.5 17 19.5 2 8 44 29.5 2.8 34 15.5 6 35 13.5

16 4.5 19 19.5 2 8 48 33.5 2.8 38 20 6 39 13.5

20 6.5 24 20.5 3.2 9.2 62 42 4 47 25.5 6.9 50 14.5

25 6.5 26 22.5 3.2 10.7 66 46 4 50.5 28 8.3 52 15

32 6.5 30 25 3.2 11.2 71 54 4 62 34 8.3 60 17

40 6.5 33 25 3.2 11.2 78 61 4 67.5 40 8.3 67 17

50 9 39 29.5 3.2 14.7 95 72.5 5 80 50 12.1 82 18

Bore

Both Ports Head Hand and Cap Ported (Radial) Both Ports Cap (Radial)

Standard Piston Magnetic Piston Standard Piston Magnetic Piston Standard Piston Magnetic Piston

SA2 TA2 ZA2 SA3 TA3 ZA3 SA2 TA2 ZA2 SA3 TA3 ZA3 SA2 TA2 ZA2 SA3 TA3 ZA3

12 12 48.3 42.3 22.9 59.2 53.2 17 53.3 47.3 27.9 64.2 58.2 17 53.3 47.3 27.9 64.2 58.2

16 14.2 50.5 44.5 25.1 61.4 55.4 19.2 55.5 49.5 30.1 66.4 60.4 19.2 55.5 49.5 30.1 66.4 60.4

20 15.8 56.4 49.5 25.7 66.3 59.4 20.3 60.9 54 30.2 70.8 63.9 20.3 60.9 54 30.2 70.8 63.9

25 13.8 59.3 51 23.7 69.2 60.9 19.8 5.3 57 29.7 75.2 66.9 19.8 65.3 57 29.7 75.2 66.9

32 15.9 64.4 56.1 25 73.5 65.2 23.9 72.4 64.1 33 81.5 73.2 23.9 72.4 64.1 33 81.5 73.2

40 16.6 65.1 56.8 26.5 75 66.7 24.6 73.1 64.8 34.5 83 74.7 24.6 73.1 64.8 34.5 83 74.7

50 12.4 73.7 61.6 21.3 82.6 70.5 18.4 79.7 67.6 27.3 88.6 76.5 18.4 79.7 67.6 27.3 88.6 76.5


E33

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Dimensions – Rear Flange Mount

VIEW A-A VIEW B-B B

BA

A

(4) - ØFB

ZF2 (ZF3) + STROKE

MF

UF

TE2 (TE3) + STROKE

WH

E

TF

RE

R SQ.

R SQ.

E

UF

BORES 32-50mm

BORES 12-25mm

VIEW B-B

TF

W

W

SQ.

QSQ.

Rear Flange Mounting Kits can be ordered assembled to the cylinder or separately as needed. Please refer to the How To Order Code section to order the rear flange assembled to the cylinder. For separate mounting kits, please refer to page E36 for the proper kit per bore size.

Rear Flange Mount

Bore E FB MF R S TF U UF W WH

12 25 4.5 5.5 — 6 45 25.4 55 14 3.5

16 30 4.5 5.5 — 6 45 28.6 55 20 3.5

20 39 6.5 8 — 6.9 50.5 34.9 62 27 4.5

25 42 6.5 8 — 8.3 53 39 65 27 5

32 48 5.5 8 34 8.3 58 44.5 68 30 7

40 54 5.5 8 40 8.3 66 50.8 76 30 7

50 67 6.5 9 50 12.1 79 63.5 90 42.8 8

Bore

Both Ports Head Hand and Cap Ported (Radial) Both Ports Cap (Radial)

Standard Piston Magnetic Piston Standard Piston Magnetic Piston Standard Piston Magnetic Piston

TE2 ZF2 TE3 ZF3 TE2 ZF2 TE3 ZF3 TE2 ZF2 TE3 ZF3

12 39 33 49.9 43.9 44 38 54.9 48.9 44 38 54.9 48.9

16 41.2 35.2 52.1 46.1 46.2 40.2 57.1 51.1 46.2 40.2 57.1 51.1

20 47.2 40.3 57.1 50.2 51.7 44.8 61.6 54.7 51.7 44.8 61.6 54.7

25 50.1 41.8 60 51.7 56.1 47.8 66 57.7 56.1 47.8 66 57.7

32 55.2 46.9 64.3 56 63.2 54.9 72.3 64 63.2 54.9 72.3 64

40 55.9 47.6 65.8 57.5 63.9 55.6 73.8 65.5 63.9 55.6 73.8 65.5

50 64.5 52.4 73.4 61.3 70.5 58.4 79.4 67.3 70.5 58.4 79.4 67.3


E34

C086


E

Double Rod

Bore S AF KF WF WH

12 6 6 M3x0.5 13.5 3.5

16 6 8 M4x0.7 13.5 3.5

20 6.9 7 M5x0.8 14.5 4.5

25 8.3 12 M6x1.0 15 5

32 8.3 13 M8x1.25 17 7

40 8.3 13 M8x1.25 17 7

50 12.1 15 M10x1.5 18 8

Bore

Basic Mount - Style C Foot Mount - Style F Rear Flange Mount - Style J

Standard Piston Magnetic Piston Standard Piston

Magnetic Piston

Standard Piston

Magnetic Piston

I52 ZH6 XH6 I53 ZH7 XH7 SA4 XH8 SA5 XH9 ZB2 XH2 ZB3 XH3

12 31.1 40.6 44.1 42 51.5 55 19.1 64.1 30 75 46.1 54.1 57 65

16 31.6 41.1 44.6 42.5 52 55.5 19.6 64.6 305 75.5 46.6 54.6 57.5 65.5

20 33.5 44.9 49.4 43.4 54.8 59.3 20.6 68.5 305 78.4 52.9 59.4 62.8 69.3

25 35.6 48.9 53.9 45.5 58.8 63.8 20.6 73.9 305 83.8 56.9 63.9 66.8 73.8

32 40.1 55.4 62.4 49.2 64.5 71.5 24.1 82.4 33.2 91.5 63.4 72.4 72.5 81.5

40 40.6 55.9 62.9 50.5 65.8 72.8 24.6 82.9 34.5 92.8 63.9 72.9 73.8 82.8

50 41.4 61.5 69.5 50.3 70.4 78.4 18.4 89.5 27.3 98.4 70.5 79.5 79.4 88.4

Catalog 0900P-E

Dimensions – Double Rod Style

S

I52 (I53) + STROKE

S

S

ZB2 (ZB3) + STROKE

XH2 (XH3) + 2X STROKE

END 1 END 2

END 2END 1END 1 END 2

WH WF + STROKE

WF + STROKE

XH8 (XH9) + 2X STROKE

SA4 (SA5) + STROKE

WFWH

AF

KF

WH + STROKE

ZH6 (ZH7) + STROKE

ZH6 (ZH7) + 2X STROKE

Foot MountBasic Mount

Rear Flange Mount

The double rod dimensions differ from, or are in addition to, those for single rod cylinders depicted on previous pages.

To determine dimensions for a double rod cylinder, first refer to the desired single rod porting style cylinder configuration you wish to incorporate on preceding pages of this catalog. After selecting the necessary dimensions from that drawing, return to this page and supplement the single rod dimensions with those shown on these dimensional tables.

Note: Double rod end 2 will have a Short Bearing head as standard.


E35

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Rod End DimensionsBasic Mount

Catalog 0900P-E

Double Rod Style Rod End Dimensions

SWWrench Flats

KK

AM WH


WH

For special rod ends, specify “3” in model number and give desired WH, AM or AF and KK or KF (length dimensions in millimeters).

SWWrench FlatsKK

AM WF

SWWrench Flats

KK

AM WF

W

KF Thread xDepth AF

WFKF Thread xDepth AF

WF

W

For special rod threads, specify “3” in model number and give desired AM or AF, WF and KK or KF (length dimensions in millimeters).

Rod End DimensionsFoot Mount and Rear Flange Mount

Foot Mount Rear Flange Mount

(Revised 04-30-12)


E36

C086


E

Catalog 0900P-E

Mountings and Service Kits

Rear Flange Mount KitsBore Size Kit Number

12 P1M-4DMB16 P1M-4FMB20 P1M-4HMB25 P1M-4JMB32 P1M-4KMB40 P1M-4LMB50 P1M-4MMB

Seal KitsBore Size

Single Rod Cylinders Double Rod CylindersClass 1 Seals Class 5 Seals Class 1 Seals Class 5 Seals

12 P1M-6DRN P1M-6DRV P1M-6DRT P1M-6DRP16 P1M-6FRN P1M-6FRV P1M-6FRT P1M-6FRP20 P1M-6HRN P1M-6HRV P1M-6HRT P1M-6HRP25 P1M-6JRN P1M-6JRV P1M-6JRT P1M-6JRP32 P1M-6KRN P1M-6KRV P1M-6KRT P1M-6KRP40 P1M-6LRN P1M-6LRV P1M-6LRT P1M-6LRP50 P1M-6MRN P1M-6MRV P1M-6MRT P1M-6MRP

Foot Bracket Mounting KitsBore Size Stroke Kit Number

12<10mm L078290012≥10mm L078300012

16<10mm L078290016≥10mm L078300016

20<10mm L078290020≥10mm L078300020

25<10mm L078290025≥10mm L078300025

32<10mm L078290032≥10mm L078300032

40<10mm L078290040≥10mm L078300040

50<10mm L078290050≥10mm L078300050

Available Gripper Series and Sizes perP1M Tooling Plate Cylinder Bore Size

Bore Size Gripper Series* and Sizes12 P5G-AP3, P5G-AA3, P5G-AW316 P5G-AP3, P5G-AA3, P5G-AW320 P5G-AP4, P5G-AA4, P5G-AW425 P5G-AP4, P5G-AA4, P5G-AW432 P5G-AP5, P5G-AA5, P5G-AW540 P5G-AP5, P5G-AA5, P5G-AW550 P5G-AP6, P5G-AA6, P5G-AW6

BoreSize

Cylinder Assembly Fasteners Piston Rod Fastener Guide Rod FastenersFastener Thread

Fastener TorqueHexKey

Fastener Thread


Fastener Thread


Size Nm in-lb Size Size Nm in-lb Size Size Nm in-lb Size12 M4x0.7 1.4-1.8 12-16 2.5 M3x0.5 0.6-0.9 5-8 2 M3x0.5 0.6-0.9 5-8 216 M4x0.7 1.4-1.8 12-16 2.5 M4x0.7 1.4-1.8 12-16 2.5 M3x0.5 0.6-0.9 5-8 220 M5x0.8 2.5-2.9 22-26 3 M5x0.8 2.5-2.9 22-26 3 M4x0.7 1.4-1.8 12-16 2.525 M5x0.8 2.5-2.9 22-26 3 M6x1.0 4.1-4.5 36-40 4 M4x0.7 1.4-1.8 12-16 2.532 M6x1.0 4.1-4.5 36-40 4 M8x1.25 10.2-11.1 90-98 5 M4x0.7 1.4-1.8 12-16 2.540 M6x1.0 4.1-4.5 36-40 4 M8x1.25 10.2-11.1 90-98 5 M4x0.7 1.4-1.8 12-16 2.550 M8x1.25 10.2-11.1 90-98 5 M10x1.5 21.5-22.6 190-200 6 M5x0.8 2.5-2.9 22-26 3

Mounting Assembly Fastener Selection Chart

Mounting Configuration QtyFastener Thread Length “L”

12mm Bore

16mm Bore

20mm Bore

25mm Bore

32mm Bore

40mm Bore

50mm Bore

Head (Front End Cover)

Style F - Foot Mount* , Short — N/A N/A N/A N/A N/A N/A N/A

Style F - Foot Mount*, Std. 2 23mm 23mm 28mm 28mm 30mm 30mm 32mm

Cap (Rear End Cover)

Non-Ported Cap (Ports H, M, R)

Style F - Foot Mount 2 12mm 12mm 18mm 18mm 20mm 20mm 25mm

Style H - Rear Flange Mount 2 12mm 12mm 18mm 18mm 20mm 20mm 25mm

Ported Cap (Ports G, J, K, N, L, P Q, S, T)

Style F - Foot Mount 2 20mm 20mm 23mm 23mm 30mm 30mm 30mm

Style H - Rear Flange Mount 2 20mm 20mm 23mm 23mm 30mm 30mm 30mm

*Use cylinder assembly fasteners to assemble front foot mount options.

Short = Stroke lengths <10mm and without magnet.Std. = Stroke lengths longer than or equal to 10mm or with magnet option.

1. Determine the bore size, stroke, porting and mounting configuration of the cylinder.2. Select the appropriate thread length fastener for both the head and cap (end cover)3. Use a quantity of (2) each to assemble mounts to the respective end covers.4. Ensure sufficient thread length engagement (1-1.5 x thread diameter) into mating thread.

Example:40mm bore, 15mm stroke, M porting, foot mount Head assembly fastener = 30mm thread length Cap assembly fastener = 20mm thread length (use quantity of 2 each)


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

P1M SeriesSwing ClampExtra Low Profile Pneumatic Cylinders

ContentsFeatures and Benefits .......................................................E38Ordering Information..........................................................E39Cylinder Specifications ......................................................E40Performance Data ..............................................................E41

Dimensions ................................................................ E42-E48Mechanical Accessories ....................................................E49Service Kits .......................................................................E50

Swing Clamp Cylinders P1M Series

E38

C086


E

Catalog 0900P-E

Features and Benefits

P1M Series Swing Clamp Flexible Porting Options

Both Ports Head* Both Ports Cap

Head and Cap PortedBoth Ports Cap Face

2

4

2

4

42

2

4

* Both Ports Head (NPT) is the standard porting configuration for the P1M Swing Clamp Cylinder. Alternate porting options are available at an additional cost.

To retract cylinder, apply air to port #2. To extend cylinder, apply air to port #4.

Swing Clamp CylindersP1M Series

E39

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

How to Order P1M Series Swing Clamp Cylinders

1 Cylinder with mounting fitted2 Designator #3 should be selected for special rod ends only. When selecting this option, please provide rod style (male or female), thread pitch, thread depth, and wrench flat dimension.3 Both Ports Head NPT is the standard porting arrangement for this cylinder. Alternate porting arrangements are available at an additional cost. 4 Bumpers for this option are polyurethane. Piston, rod and body end seals are fluorocarbon. Please review the following specification page for additional information. 5 Designator J should be selected for cylinders that require a special option not covered in catalog. 6 See specification table for stroke lengths available per a given bore size. Note: For sensor specifications and part numbers, please refer to the Electronic Sensors section.

P1M 032 C H F M C 6 M 020

Cylinder Style

C Basic, no mounting

H Rear Flange 1

K Clamp Arm 1

L Rear Flange & Clamp Arm 1

Cylinder Option

H Swing Clamp

J Swing Clamp Special (MTO) 5

Function

F Right Hand Rotation

L Left Hand Rotation

Stroke in mm 6

Port Type & Location

BSPP “G” Threads

G Head & Cap Radial

H Both in Head

J Both in Cap Radial

K Both in Cap Axial

NPT Threads

N Head & Cap Radial

M Both in Head 3

L Both in Cap Radial

P Both in Cap Axial

BSPT “R” Threads

Q Head & Cap Radial

R Both in Head

S Both in Cap Radial

T Both in Cap Axial

Rod Threads

6 Metric Female

3 Special 2


C Chrome Plated Carbon Steel

Bumpers, Magnets & Seals

B No Magnet, Bumpers, Standard Seals

F No Magnet, Bumpers, Fluorocarbon Seals 4

M Magnetic Piston, Bumpers, Std. Seals

V Magnetic Piston, Bumpers, Fluorocarbon Seals 4

Bore Size

032 32mm

040 40mm

050 50mm

Catalog 0900P-E


Service kits of expendable parts for fluid power cylinders are stocked in principal industrial locations across the U.S.A. and other countries. For prompt delivery and complete information, contact your nearest distributor.

Seal Kit Part NumbersBore Class 1 Class 5

32 L078660032 L078670032

40 L078660040 L078670040

50 L078660050 L078670050


E40

C086


E

Catalog 0900P-E

Cylinder Specifications

Cylinder Specifications• Bore Sizes: 32, 40 and 50mm• Maximum Operating Pressure: 10 Bar or 145 PSI• Standard Operating Temperature: -20°C to +80°C or -4°F to +176°F• Optional High Temperature: -10°C to +121°C or +14°F to +250°F

Material Specifications• Piston Rod: Hard Chrome Plated Steel, 100,000 PSI Yield• Piston Rod Bearing: Stress Proof Steel• Piston Rod Seal: Polyurethane• Outboard Rotating Mechanism Cover: 2011 T3 Aluminum• End Covers: Black Anodized Aluminum• End Cover Fasteners: Zinc Plated Carbon Steel• Cylinder Body: Clear Anodized Aluminum• O-Rings: Nitrile Rubber, NBR• Piston: Aluminum Alloy• Piston Seal: Nitrile Rubber, NBR• Magnet: Plastic Coated Magnetic Material• Bumpers: Polyurethane

High Temperature Seal Option Material*• End Cover O-Rings: Fluorocarbon, FPM• Piston Rod Seal: Fluorocarbon, FPM• Piston Seal: Fluorocarbon, FPM* Option intended for limited exposure to temperatures over 80°C, or 176°F.

Option is primarily for applications which subject the cylinder to fluids and or chemicals that have an adverse effect on external seals. If continued exposure to elevated temperatures is required, please consult the Cylinder Division for alternative options.

Cylinder Weights, g (lbs)Bore(mm)

Clamp Stroke(mm)

BasicMount

Clamp ArmMount

Rear FlangeMount

Arm & FlangeMount

3210 600 (1.32) 691 (1.52) 664 (1.46) 755 (1.66)

20 673 (1.48) 764 (1.68) 736 (1.62) 827 (1.82)

4010 700 (1.54) 791 (1.74) 782 (1.72) 873 (1.92)

20 800 (1.76) 891 (1.96) 882 (1.94) 973 (2.14)

5020 1355 (2.98) 1527 (3.36) 1500 (3.30) 1673 (3.68)

50 1736 (3.82) 1909 (4.20) 1882 (4.14) 2055 (4.52)

Clamp Forces, N (lbs)Bore(mm)

Rod Dia.(mm)

Net Area (cm2)

Force, N (lb) at Various Operating Pressures, Mpa (PSI)

0.2 (29) 0.4 (58) 0.6 (87) 0.8 (116) 1.0 (145)

32 16 6.03 121 (27) 241 (54) 362 (81) 483 (108) 603 (136)

40 16 10.56 211 (47) 422 (95) 633 (142) 844 (190) 1056 (237)

50 20 16.49 330 (74) 660 (148) 990 (222) 1319 (297) 1649 (371)

SpecificationsBore (mm)

32 40 50

Rotary Stroke, mm 15 19

Clamp Stroke, mm 10/20 20/50

Allowable Moment, Nm (ft-lbs) 27 (20) 47 (35) 107 (79)

Degree of Non-Rotation ±1.0° ±1.0° ±0.8°

Right Hand (Clockwise) Clamping Rotation

Left Hand (Counter-Clockwise) Clamping Rotation


E41

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Performance Data

The following graph represents maximum clamp arm lengths per a given bore and operating pressure. Care should be taken not to exceed maximum operating limits outlined in this graph.

Guidelines for Custom Clamp Arms

0

25

50

75

100

125

150

175

200

225

250

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

Arm

Len

gth

(m

m)

32mm & 40mm Bores

50mm Bore

Pressure (MPa)

0.000

0.005

0.010

0.015

0.020

0.025

0.030

20 40 60 80 100 120 140 160 180 200

32mm & 40mm Bores

50mm Bore

Cylinder Speed (mm/s)

Mo

men

t o

f In

erti

a (k

g-m

2 )

The following graph represents maximum operating speeds per a given inertia moment when incorporating a custom clamp arm. Exceeding the parameters outlined in the graph will lead to internal cylinder component damage. Please refer to the following page for examples and formulas when designing the clamp arm to be applied.


E42

C086


E

Catalog 0900P-E

Dimensions – Head Ported

Head Ported Dimensions

Bore AF BG1 BG2 E E1 E2EE

EE1 HL I12 I91 I92 KFBSPP BSPT NPTF

32 18 46.5 17 48 56 24 G 1/8 Rc 1/8 1/8 1.1 9 5.5 13.5 4 M10x1.5

40 18 39 17.5 56 62.5 28 G 1/8 Rc 1/8 1/8 1.5 9 5.5 10 4 M10x1.5

50 25 47.5 23.5 67 74.5 33.5 G 1/8 Rc 1/8 1/8 2 12 5.5 12 5 M12x1.75

Bore L MM NB PM R R1 RTSW -0.1-0.2

VD WH YNon-Magnetic Magnetic

I79 ZH9 I78 ZH8

32 25 16 9.5 30.5 34 10.5 M6x1 14 3 6.5 30 h9 67 92.5 76 101.5

40 20 16 11.5 22 40 10.5 M6x1 14 3 6.5 30 h9 60 92.5 70 102.5

50 20 20 14.5 28 50 13.5 M8x1.25 17 3.5 7.5 37 h9 72.5 113 81.5 122

* Both Ports Head (NPT) is the standard porting configuration for the P1M Swing Clamp Cylinder. Alternate porting options are available at an additional cost.

R

E2

E1

ØMM

R

E

L° L°

NB NB

SW

ØY

I12

WH

VD

PM

I79 (I78) + CLAMP STROKE

ZH9 (ZH8) + 2X CLAMP STROKE

KF AF

I91

BG1BG2

I92

RT HLØR1 I91

MTG. HOLES @180°2 PLACES EACH SIDE

HLHL

ØR1

ØR1


2X ØEE PORT, ØEE1 ORIFICE


E43

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Dimensions – Head and Cap Ported

Head and Cap Ported Dimensions


EE1 EE2 HL I12 I91 I92 KFBSPP BSPT NPTF

32 18 46.5 25 48 56 24 G 1/8 Rc 1/8 1/8 1.1 2.7 9 5.5 13.5 11.5 M10x1.5

40 18 39 25.5 56 62.5 28 G 1/8 Rc 1/8 1/8 1.5 3.4 9 5.5 10 12 M10x1.5

50 25 47.5 29.5 67 74.5 33.5 G 1/8 Rc 1/8 1/8 2 4 12 5.5 12 11 M12x1.75

Bore L MM NB PL PM R R1 RTSW-0.1-0.2


I79 ZH9 I78 ZH8

32 25 16 9.5 8 30.5 34 10.5 M6x1 14 3 6.5 30 h9 75 100.5 84 109.5

40 20 16 11.5 7.5 22 40 10.5 M6x1 14 3 6.5 30 h9 68 100.5 78 110.5

50 20 20 14.5 8 28 50 13.5 M8x1.25 17 3.5 7.5 37 h9 78.5 119 87.5 128

E2

E1

ØMM

R

E

R

NB NB

L° L°

SW

I12

VD



WH ØY

PM PL

KF AF

ØEE PORTØEE1 ORIFICE

ØEE PORTØEE2 ORIFICE

I91

BG1

ØR1

I92

BG2

ØR1HL

HL


RT HLØR1 I91



E44

C086


E

Catalog 0900P-E

Dimensions – Cap Ported Radial

R

ØMM

R

E

NB NB

L° L°

E2

E1

SW

I12

VD



KF AF

WH ØY

PLØEE PORTØEE1 ORIFICE

I91

BG1

ØR1

I92

BG2

ØR1 HLHL


RT HLØR1 I91


Cap Radial Ported Dimensions



32 18 46.5 25 48 56 24 G 1/8 Rc 1/8 1/8 1.1 9 5.5 13.5 11.5 M10x1.5

40 18 39 25.5 56 62.5 28 G 1/8 Rc 1/8 1/8 1.5 9 5.5 10 12 M10x1.5

50 25 47.5 29.5 67 74.5 33.5 G 1/8 Rc 1/8 1/8 2 12 5.5 12 11 M12x1.75

Bore L MM NB PL R R1 RTSW -0.1-0.2


I79 ZH9 I78 ZH8

32 25 16 9.5 8 34 10.5 M6x1 14 3 6.5 30 h9 75 100.5 84 109.5

40 20 16 11.5 7.5 40 10.5 M6x1 14 3 6.5 30 h9 68 100.5 78 110.5

50 20 20 14.5 8 50 13.5 M8x1.25 17 3.5 7.5 37 h9 78.5 119 87.5 128


E45

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Dimensions – Cap Rear Face Porting

R

E2

E1

SW

P2

P3

P4

P1

ØMM

R

E

I12VD



WH

ØY

2X ØEE PORT,ØEE1 ORIFICE

I91

BG1 I92

BG2

ØR1

HLHLØR1


KF AF

RT HLØR1 I91


Cap Rear Face Ported Dimensions



32 18 46.5 25 48 56 24 G 1/8 Rc 1/8 1/8 1.1 9 5.5 13.5 11.5 M10x1.5

40 18 39 25.5 56 62.5 28 G 1/8 Rc 1/8 1/8 1.5 9 5.5 10 12 M10x1.5

50 25 47.5 29.5 67 74.5 33.5 G 1/8 Rc 1/8 1/8 2 12 5.5 12 11 M12x1.75

Bore MM P1 P2 P3 P4 R R1 RTSW -0.1-0.2


I79 ZH9 I78 ZH8

32 16 45.5 16.5 32 28.5 34 10.5 M6x1 14 3 6.5 30 h9 75 100.5 84 109.5

40 16 51 12 23 33 40 10.5 M6x1 14 3 6.5 30 h9 68 100.5 78 110.5

50 20 63 54.5 25 41.5 50 13.5 M8x1.25 17 3.5 7.5 37 h9 78.5 119 87.5 128


E46

C086


E

Catalog 0900P-E

Dimensions – Clamp Arm Mount

C

D

10

B

F

G

A

H + Clamp Stroke

T9 (T8) + 2X CLAMP STROKE

Z9 (Z8) + 2X CLAMP STROKE

Clamp Arm Mount DimensionsBore A B C D F G H

32 18 67 20 45 25 M8x1.25 39

40 18 67 20 45 25 M8x1.25 46

50 22 88 22 63 40 M10x1.5 58

Bore

Head Ported Only Head and Cap Ported Cap Radial Ported Cap Rear Face Ported

Non-Magnetic Magnetic Non-

Magnetic Magnetic Non-Magnetic Magnetic Non-

Magnetic Magnetic

T9 Z9 T8 Z8 T9 Z9 T8 Z8 T9 Z9 T8 Z8 T9 Z9 T8 Z8

32 106 63 115 72 114 71 123 80 114 71 123 80 114 71 123 80

40 106 63 116 73 114 71 124 81 114 71 124 81 114 71 124 81

50 130.5 68.5 139.5 77.5 136.5 74.5 145.5 83.5 136.5 74.5 145.5 83.5 136.5 74.5 145.5 83.5


E47

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Rear Flange Mount DimensionsBore E FB MF R TF UF

32 48 5.5 8 34 58 68

40 54 5.5 8 40 66 76

50 67 6.6 9 50 79 90

Bore

Head Ported Only Head and Cap Ported Cap Radial Ported

Non-Magnetic Magnetic Non-Magnetic Magnetic Non-Magnetic Magnetic

ZF2 ZF3 ZF2 ZF3 ZF2 ZF3

32 100.5 109.5 108.5 117.5 108.5 117.5

40 100.5 110.5 108.5 118.5 108.5 118.5

50 122 131 128 137 128 137

Catalog 0900P-E

Dimensions – Rear Flange Mount

R

TF

UF

MF

4X ØFB

ZF2 (ZF3) + 2X CLAMP STROKE

RE

Rear Flange Mounting Kits can be ordered assembled to the cylinder or separately as needed. Please refer to page E49 for proper rear flange mounting kits associated with a given bore size.


E48

C086


E

Catalog 0900P-E

Dimensions – Rear Flange/Clamp Arm Mount

C

G

10F Z2 (Z3) + 2X CLAMP STROKE

T2 (T3) + 2X CLAMP STROKE

MF

4X ØFB

RR

TF

UF

E R

DB

A

H + CLAMP STROKE

SPANNER WRENCHPART # 0116760000

GLAND WRENCHPART # 0883060000

32mm Bore Assembly

To disassemble the front end cover, the rod cover must first be removed. To do this the ring nut must be unscrewed (right-hand thread) using the spanner and gland wrench shown to the left. Order each component separately.

Rear Flange and Clamp Arm Mount DimensionsBore A B C D E F G H FB MF R TF UF

32 18 67 20 45 48 25 M8x1.25 39 5.5 8 34 58 68

40 18 67 20 45 54 25 M8x1.25 46 5.5 8 40 66 76

50 22 88 22 63 67 40 M10x1.5 58 6.5 9 50 79 90

Bore

Head Ported Only Head and Cap Ported Cap Radial Ported

Non-Magnetic Magnetic Non-Magnetic Magnetic Non-Magnetic Magnetic

T2 Z2 T3 Z3 T2 Z2 T3 Z3 T2 Z2 T3 Z3

8932 114 71 123 80 122 79 131 88 122 79 131 88

40 114 71 124 81 122 79 132 89 122 79 132 89

50 139.5 77.5 148.5 86.5 145.5 83.5 154.5 92.5 145.5 83.5 154.5 92.5


E49

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Mechanical Accessories

Clamp Arm Mounting Kit 32, 40, and 50mm Bore

Clamp Arm Mounting Kit

Bore Part NumberFastener Torque

Nm In-lbs

32 L078550000 8 - 10 70 - 88

40 L078550000 8 - 10 70 - 88

50 L078560000 14 - 16 124 - 142

Component IdentificationItem

Number Part Description Material

1 Clamp Arm Aluminum

2 Clamp Bolt Steel

3 Hex Jam Nut Steel

4 Socket Head Cap Screw Steel

5 Lock Washer Steel

Rear Flange Mount Kit 32, 40, and 50mm Bore

1

5

4

2

3

Note: To remove or install the arm on the piston rod, use a wrench to secure the arm while loosening or tightening the socket head cap screw. Do not secure any other part of the cylinder.

1

2

2

Rear Flange Mounting Kit

Bore Part NumberFastener Torque

Nm In-lbs

32 P1M-4KMB 3.6 - 4.0 32 - 36

40 P1M-4LMB 3.6 - 4.0 32 - 36

50 P1M-4MMB 8.0 - 9.0 72 - 80

Component IdentificationItem

Number Part Description Material

1 Flange Aluminum

2 Socket Head Cap Screw Steel



E

Catalog 0900P-E

Service Kits

Seal Kits

Bore Class 1 Class 5

32 L078660032 L078670032

40 L078660040 L078670040

50 L078660050 L078670050


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

LP/LPM SeriesNon-Lube Air Cylinder

ContentsFeatures ............................................................................E52Ordering Information..........................................................E53Specifications ....................................................................E54Basic Dimensions ..............................................................E55Mounting Options ..............................................................E56

Spring Data .......................................................................E57Rod Options .......................................................................E58Accessories .......................................................................E59Bumpers / Sensors ............................................................E60Service Kits .......................................................................E61

Air Cylinders LP/LPM Series

E52

C086


E

Piston Rod SealBuna-N quad seal provides positive sealing to keep pressure in and dirt out for less maintenance and trouble free performance.

Piston RodHigh strength steel, hard chrome plated for reliable smooth performance, long life, and extended seal life.

Cylinder BodyHard coated heavy wall aluminum alloy. The tube I.D. coating has extreme hardness, excellent wear and seizure resistance, low coefficient of friction, and high corrosion resistance. This provides excellent wear qualities and quick break-a-ways.

PistonAttached securely to the rod to provide maximum strength and durability.

Rod BearingHigh density iron provides maximum support for longer life.

Heads and CapsAnodized aluminum alloy for solid, lightweight, high strength performance. This provides excellent corrosion resistance, durability, and a long lasting quality appearance.

Piston SealBuna-N quad seal provides positive sealing with air.

Catalog 0900P-E

Features

• Reduces Design Height

• Light Weight

• Reduces Cylinder Overhang

• Specials Available

Air CylindersLP/LPM Series

E53

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E


How to Order LP/LPM Series Cylinders

Bore Size

0.56 9/16"0.75 3/4"1.12 1-1/8"1.50 1-1/2"2.00 2"2.50 2-1/2"3.00 3"4.00 4"

Double Rod Cylinder

Blank Single Rod

K Double Rod

1.50 K N

Mounting Style

N Basic (Std.)

Single Rod Styles4F Head Bolt

4R Cap Bolt

2F Head Trunnion 1

2R Cap Trunnion 1

1 Cap Pivot Eye

Double Rod StylesN Basic

4R Cap Bolt

2F Head Trunnion

Hollow Rod Styles 1,2,5

NH Basic

4RH Cap Bolt

2FH Head Trunnion

Series

LP Standard

LPM Magnetic Piston 5

LP L

Piston Seal

Blank Standard Seal

L Lipseal Piston Seal 3

Seals

Blank Standard

V Class 5 Seals

V B

Bumpers

Blank No Bumpers

B Bumpers Both Ends

H Head End Only

C Cap End Only 4

(See page E60 for stroke reduction.)

Spring

Blank None

E Spring Extend

R Spring Return

E S

Special Feature

Blank No Special Feature

S Special Feature

Rod End Thread Style

9 Standard Female Rod End

4 Optional Male Rod End

3 Special Rod End (specify dimensions or sketch)

9 1.25"

Stroke

Specify in inches.

1. Not available on 9/16" bore.

2. Hollow rods are used on double rod cylinders. All hollow rod options require the double rod prefix “K”.

3. Lipseal piston is not available on LPM Series.

4. Not available on spring extend.

5 LPM Series with hollow rod option are not available on the 9/16", 3/4" and 1-1/8" bore sizes.

Note: For sensor specifications and part numbers, please refer to the Electronic Sensors section.

(Revised 12-03-13)


E54

C086


E

Specifications• Low Profile Design

• 6 Mounting Styles

• 8 Bore Sizes from 9/16" to 4"

• Temperature Range: -10°F to 200°F (LPM Series 140°F max.)

• Strokes from 1/8" to 6"

• Permanent Lubrication

• Maximum Operating Pressure: 200 PSI Air

Catalog 0900P-E

Specifications

Technical Data

Push/Pull ForcesBoredia.

Rodarea

Piston areaPush/Pull

PSI

40 50 60 80 100 125 150 175 200 250

9/16Push 0.248 10 12.5 15 20 25 31 37 43 50 62

0.048 Pull 0.200 8 10 12 16 20 25 30 35 40 50

3/4Push 0.442 17.5 22 26.5 35 44 55 66 77 88 111

0.076 Pull 0.366 14.6 18 22 29 37 46 55 64 73 92

1-1/8Push 0.994 40 50 60 80 99 124 149 174 200 249

0.196 Pull 0.798 32 40 48 64 80 100 120 140 160 200

1-1/2Push 1.767 71 88 106 141 177 221 265 309 353 443

0.307 Pull 1.460 58 73 88 117 146 182 219 256 292 365

2Push 3.141 126 157 188 251 314 393 471 550 628 785

0.442 Pull 2.699 108 135 162 216 270 337 405 472 540 675

2-1/2Push 4.908 196 245 294 393 491 613 736 859 982 1227

0.442 Pull 4.466 178 223 268 357 447 558 670 781 893 1116

3Push 7.069 283 353 424 566 707 884 1060 1237 1414 1767

.601 Pull 6.468 259 324 389 519 649 811 973 1135 1297 1622

4Push 12.57 503 628 754 1006 1257 1571 1885 2200 2514 3142

0.781 Pull 11.79 471 589 707 942 1178 1484 1767 2062 2356 2945

Bore Dia.Basic N Mount

Weight in ounces*

Add per 1/8" of Stroke

(ounces)

9/16 1.1 0.08

3/4 2.0 0.1

1-1/8 5.0 0.2

1-1/2 8.5 0.4

2 11.7 0.5

2-1/2 18.6 0.6

3 25.1 0.7

4 51.1 1.1

* Base weight includes 1/8 inch of stroke.

Weights – Basic Cylinders Tie Rod Torque

Bore Torque(inch pounds)

9/16 8 - 10

3/4 20 - 25

1-1/8 20 - 25

1-1/2 35 - 40

2 35 - 40

2-1/2 50 - 60

3 70 - 80

4 150 - 160


E55

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Bore Dia.

LPM Option* LP with Lipseal Piston Option

P LB XD XJ ZB Stroke P LB XD XJ ZB

9/16† 15/16 1-7/32 2 – 1-11/32 1/2 5/8 29/32 1-11/16 – 1-1/32

3/4† 31/32 1-1/4 2-1/32 1-3/16 1-3/8 1/2 21/32 15/16 1-23/32 7/8 1-1/16

1-1/8† 63/64 1-31/64 2-3/8 1-23/64 1-39/64 9/16 43/64 1-11/64 2-1/16 1-3/64 1-19/64

1-1/2 1-1/8 1-5/8 2-13/16 1-1/2 1-3/4 7/16 13/16 1-5/16 2-1/2 1-3/16 1-7/16

2 1-9/32 1-25/32 3-1/32 1-21/32 1-29/32 7/16 61/64 1-29/64 2-45/64 1-21/64 1-37/64

2-1/2 1-21/64 1-61/64 3-21/64 1-3/4 2-5/64 1/2 1 1-5/8 3 1-27/64 1-3/4

3 1-27/64 2-3/64 3-53/64 1-53/64 2-11/64 1/2 1-3/32 1-23/32 3-1/2 1-1/2 1-27/32

4 1-1/2 2-23/64 4-11/64 2 2-31/64 1/2 1-11/64 2-1/32 3-27/32 1-43/64 2-5/32

Note minimum strokes for LPM option.

† These bore sizes not available for the LPM option with the hollow rod option.

* The LPM option is only available with the standard quad seal.

AA Diameter Bolt Circle(Mounting Holes)

Across Flats

EE NPT(2)1

3

4 2

DD threaded hole for mountingC Bore and drill thru for FB S.H.C.S.(basic model).

(4) places equally spaced on AA dia.Bolt circle bore sizes 1-1/8" thru 4".

(2) places 180 apart on AA dia.bolt circle bore sizes 9/16" and 3/4".

MM Rod Diameter

KK Thread A Deep

Customer rod end has neck downand chamfer for ease of assembly.

May be mounted fromhead or cap end

Y

G J

LB* + stroke

ZB* + strokeE Diameter

D

P* + stroke

C

Bore Dia. A C D E G J P* Y AA DD EE FB KK LB* MM ZB*

9/16 0.40 1/8 7/32 1-1/8 23/64 23/64 11/32 17/64 0.875 #8-32 #10-32 #4 #8-32 5/8 1/4 3/4

3/4 0.44 1/8 1/4 1-1/2 23/64 23/64 3/8 17/64 1.219 #10-32 #10-32 #6 #10-32 21/32 5/16 25/32

1-1/8 0.62 1/8 7/16 2 1/2 1/2 27/64 3/8 1.687 #10-32 1/8 #6 5/16-24 59/64 1/2 1-3/64

1-1/2 0.62 1/8 1/2 2-5/8 1/2 1/2 1/2 3/8 2.187 1/4-28 1/8 #10 3/8-24 1 5/8 1-1/8

2 0.70† 1/8 5/8 3-1/8 1/2 1/2 9/16 3/8 2.687 1/4-28 1/8 #10 1/2-20 1-1/16 3/4 1-3/16

2-1/2 0.70† 1/8 5/8 3-3/4 5/8 5/8 5/8 7/16 3.250 5/16-24 1/4 1/4 1/2-20 1-1/4 3/4 1-3/8

3 0.75† 1/8 3/4 4-1/4 43/64 43/64 21/32 7/16 3.781 5/16-24 1/4 1/4 5/8-18 1-9/32 7/8 1-13/32

4 0.75† 1/8 7/8 5-1/2 27/32 27/32 49/64 17/32 4.937 3/8-24 3/8 5/16 3/4-16 1-5/8 1 1-3/4

Mounting Style NCylinder DimensionsDouble ActingSingle Rod End,Female Rod Style No. 9

Temperature: -10°F to 200°F (optional Fluorocarbon seals). All air cylinders are permanently lubricated. LPM Series maximum temperature 140°F.

* These dimensions are for the LP Series with standard piston. † For strokes less than 0.25", A dimension = 0.66".

Added Length Table for LPM or Lipseal Piston Options

Catalog 0900P-E

Basic Dimensions


E56

C086


E

Head Bolt Clearance HolesMounting Style 4FAvailable Head End

Cap Bolt Clearance HolesMounting Style 4RAvailable Cap End

Head TrunnionMounting Style 2F (9/16" bore not available)

Cap TrunnionMounting Style 2R (9/16" bore not available)

Cap Pivot EyeMounting Style 1 Bore

Dia. L M CB CD FL XD* XE

9/16 1/2 1/4 3/8 3/16 21/32 1-13/32 19/32

3/4 1/2 1/4 3/8 3/16 21/32 1-7/16 3/4

1-1/8 1/2 1/4 3/8 3/16 49/64 1-13/16 3/4

1-1/2 13/16 7/16 3/4 3/8 1-1/16 2-3/16 1-3/8

2 13/16 7/16 3/4 3/8 1-1/8 2-5/16 1-3/8

2-1/2 13/16 7/16 3/4 3/8 1-1/4 2-5/8 1-3/8

3 1-9/32 9/16 1 5/8 1-21/32 3-1/16 1-7/8

4 1-9/32 9/16 1 5/8 1-11/16 3-7/16 1-7/8

Order clevis pin from accessories when required.

*These dimensions are for the LP Series with standard piston. See table on the previous page for dimensions for the lipseal piston or LPM options.

Bore Dia. TD TL UT XG XJ*

3/4 0.125 5/16 2-1/8 5/16 19/32

1-1/8 0.250 1/2 3 3/8 51/64

1-1/2 0.250 1/2 3-5/8 3/8 7/8

2 0.250 1/2 4-1/8 3/8 15/16

2-1/2 0.312 5/8 5 29/64 1-3/64

3 0.312 5/8 5-1/2 15/32 1-1/16

4 0.375 3/4 7 35/64 1-17/64

(Bolts not included)

Clearance hole for FBDiameter S.H.C.S. onAA Diameter B.C. (Seeview on previous pagefor location)

(Bolts not included) Clearance hole for FBDiameter S.H.C.S. onAA Diameter B.C. (Seeview on previous pagefor location)

XGTLTL

TD +.001 –.000

NITRITECOATED

UT XJ* + STROKETLTL

TD +.001 –.000

NITRITECOATED

UT

CD Dia.for clevis pin

XEDia.

CBFLL

MXD* + STROKE

* These dimensions are for the LP Series with standard piston.

Catalog 0900P-E

Mounting Options


E57

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Bore Dia. G

Spring Return/Extend – LP Spring Return/Extend – LPM

≥ 1/8", ≤ 1" <1", ≤ 2" ≥ 1/8", >1" >1", ≤ 2"

LD ZM Min.*Stroke LD ZM LD ZM Min.*

Stroke LD ZM

9/16 23/64 1-1/8 1-3/8 5/16 1-13/16 2-1/16 1-23/32 1-27/32 3/16 2-13/32 2-17/32

3/4 23/64 1-11/64 1-27/64 1/8 1-55/64 2-7/64 1-49/64 1-57/64 3/16 2-29/64 2-37/64

1-1/8 1/2 1-1/2 1-3/4 1/8 2-1/8 2-3/8 2-1/16 2-3/16 1/8 2-11/16 2-13/16

1-1/2 1/2 1-11/16 1-15/16 1/8 2-5/16 2-9/16 2-5/16 2-7/16 1/4 2-15/16 3-1/16

2 1/2 1-31/64 1-47/64 1/8 2-7/64 2-23/64 2-13/64 2-21/64 1/4 2-53/64 2-61/64

2-1/2 5/8 1-3/4 2 1/8 2-3/8 2-5/8 2-29/64 2-37/64 3/16 3-5/64 3-13/64

3 43/64 1-29/32 2-5/32 1/8 2-17/32 2-25/32 2-43/64 2-51/64 1/8 3-19/64 3-27/64

4 27/32 2-1/4 2-1/2 1/8 2-7/8 3-1/8 2-63/64 3-7/64 1/8 3-39/64 3- 47/64

Spring Extend & Spring Return Cylinders(Available through 2" stroke)

Bore Dia.

1/8" to 1" Stroke Over 1" to 2" Stroke Add this length to XV, XW, XY, XZ

for Lipseal PistonXV XW XY XZ XV XW XY XZ

9/16 1 1-1/8 57/64 1-1/64 1-11/16 1-13/16 1-37/64 1-45/64 9/32

3/4 1-1/64 1-9/64 59/64 1-3/64 1-45/64 1-53/64 1-39/64 1-47/64 9/32

1-1/8 1-23/64 1-31/64 1-9/32 1-13/32 1-63/64 2-7/64 1-29/32 2-1/32 1/4

1-1/2 1-25/64 1-33/64 1-11/32 1-15/32 2-1/64 2-9/64 1-31/32 2-3/32 5/16

2 1-11/64 1-19/64 1-13/32 1-17/32 1-51/64 1-59/64 2-1/32 2-5/32 25/64

2-1/2 1-3/8 1-1/2 1-23/32 1-27/32 2 2-1/8 2-11/32 2-15/64 3/8

3 1-1/2 1-5/8 1-55/64 1-63/64 2-1/8 2-1/4 2-31/64 2-39/64 7/16

4 1-27/32 1-31/32 2-13/64 2-21/64 2-15/32 2-19/32 2-53/64 2-61/64 13/32

* Note minimum strokes for LPM option.

1/8 +STROKE

1/8

XZ + 2 x STROKEXY + STROKE

XV + STROKEXW + STROKESpring Return Dims.

Model NLPR

Spring Extend Dims. Model NLPE

Spring Force Data1/8" to 1" Stroke Over 1" to 2" Stroke

Bore dia.Max. Spring Force (lbs)

Spring Rate(lb/in)

Bore dia.Max. Spring Force (lbs)

Spring Rate(lb/in)

9/16 5.7 4.25 9/16 5.7 1.75

3/4 9 6 3/4 9 2.5

1-1/8 10 6 1-1/8 10 2.5

1-1/2 13 5.5 1-1/2 12 2.25

2 13 5.5 2 12 2.25

2-1/2 17.5 6 2-1/2 16 2.5

3 & 4 24 6.5 3 & 4 23 2.75

GG1/8 LD + STROKE

ZM + 2 x STROKE

Double Rod Spring Extend & Spring Return Cylinders(Available through 2" stroke)

Catalog 0900P-E

Spring Data


E58

C086


E

GG1/8

B Dia. thruon ModelKNH

LD + STROKEZM + 2 x STROKE

Note: Cylinders with hollow rod option should not be bottomed out during stroke.

LP Double or Hollow Rod Option, LPM, Lipseal Piston

Bore Dia. B GStandard Double Rod End

or with Hollow RodLPM Option

LP with Lipseal Piston Option

LD ZM LD ZM LD ZM

9/16 * 23/64 3/4 1 1-11/32 1-15/32 1-1/32 1-9/32

3/4 9/64 23/64 13/16 1-1/16 1-13/32 1-17/32 1-3/32 1-11/32

1-1/8 7/32 1/2 1-3/16 1-7/16 1-3/4 1-7/8 1-7/16 1-11/16

1-1/2 9/32 1/2 1-19/64 1-35/64 1-59/64 2-3/64 1-39/64 1-55/64

2 3/8 1/2 1-3/8 1-5/8 2-3/32 2-7/32 1-49/64 2-1/64

2-1/2 3/8 5/8 1-5/8 1-7/8 2-21/64 2-29/64 2 2-1/4

3 7/16 43/64 1-11/16 1-15/16 2-29/64 2-37/64 2-1/8 2-3/8

4 1/2 27/32 2-1/32 2-9/32 2-49/64 2-57/64 2-7/16 2-11/16

*Hollow rod not available on 9/16" bore.

Double or Hollow Rod Cylinders

Catalog 0900P-E

Rod Options

Optional Male Rod EndSpecify #4 Bore Dia. A C KK MM

9/16 0.38 1/8 #8-32 1/4

3/4 0.50 1/8 #10-32 5/16

1-1/8 0.50 1/8 5/16-24 1/2

1-1/2 0.50 1/8 3/8-24 5/8

2 0.62 1/8 1/2-20 3/4

2-1/2 0.62 1/8 1/2-20 3/4

3 0.75 1/8 5/8-18 7/8

4 0.75 1/8 3/4-16 1

MM Rod Diameter

KK Thread

A C

Non-Standard RodsFor non-standard rod ends, please specify rod thread style 3 and provide the KK, A, and C dimensions as needed.

KK Thread

A C


E59

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

CBsq.

CEA

KK Thread

CD Dia.for clevis pin

CA

Bore Part # A CA CB CD CE KK

9/16 L073810008 3/8 15/32 3/8 3/16 1-3/32 #8-32

3/4 L073810010 3/8 15/32 3/8 3/16 1-3/32 #10-32

1-1/8 L073810020 9/16 15/32 3/8 3/16 1-9/32 5/16-24

1-1/2 L073810024 5/8 23/32 3/4 3/8 1-25/32 3/8-24

2-2-1/2 L073810032 21/32 23/32 3/4 3/8 1-27/32 1/2-20

3 L073810040 21/32 1 1 5/8 2-3/8 5/8-18

4 L073810048 21/32 1 1 5/8 2-3/8 3/4-16

Clevis Bracket(Supplied with Pin)

Part # E L M CB CD DD FL RE

L073820012 1 13/32 7/32 25/64 3/16 9/64 9/16 3/4

L073820024 1-3/4 25/32 13/32 49/64 3/8 11/64 15/16 1-3/8

L073820040 2-1/2 1 9/16 1-1/64 5/8 17/64 1-1/4 2

Use L073820012 on 9/16", 3/4" and 1-1/8" bore. Use L073820024 on 1-1/2", 2" and 2-1/2" bore.Use L073820040 on 3" and 4" bore.

Note: The Clevis Bracket is an accessory for the rod eye or the cap pivot eye and cannot be mounted directly to the cylinder.

Part # SB ST SU SW TD TL TS US

L073840016 1/4 7/8 13/16 5/16 .252 1/2 3/8 1-1/2

L073840020 5/16 1 15/16 3/8 .314 5/8 29/64 1-5/8

L073840024 3/8 1-1/4 1- 1/16 7/16 .377 3/4 35/64 1-7/8

Use L073840016 on 1-1/8", 1-1/2" and 2" bore. Use L073840020 on 2- 1/2" and 3" bore. Use L073840024 on 4" bore.

MRE

E sq.

RE

DD Dia. (4)CD Dia.

for clevis pin CB

FLL

TL

SUTD +.001–.000

dia. thru

US

SW

ST

SBbolt size

TS

Clevis Pin

Part # CD HP LH LP

L073830012 3/16 3/32 1 29/32

L073830024 3/8 5/32 1-5/8 1-15/32

L073830040 5/8 5/32 2 1-27/32LH

LP

HP Diameter thru

CD Diameter

Rod Eye

Catalog 0900P-E

Cylinder Accessories

Trunnion Bracket


E60

C086


E

To sense piston position, mount sensor along tie rod using 2 each small set screws.

Size A

Piston Travel at

Midstroke (in ±0.01) (Sensor

On)

Minimum Activation Distance from End of

Stroke (in)

Head Cap

9/16 0.32 0.20 0.13 0.13

3/4 0.25 0.23 0.13 0.13

1-1/8 0.20 0.32 0.13 0.13

1-1/2 0.10 0.32 0.07 0.07

2 0.10 0.35 0.06 0.06

2-1/2 0.03 0.42 0.06 0.06

3 0.03 0.47 0.12 0.12

4 0.00 0.47 0.12 0.12

Sensor Mounting Data

.86

A

SET SCREWS

Catalog 0900P-E

Bumpers / Sensor Mounting

Noise Dampening BumpersBumpers both ends – B Bumpers rod end – R Bumper cap end – C*

Bumpers are available at either or both ends of the cylinder to reduce noise for quieter operation. Bumper material is a 70 durometer nitrile.

The table shows the distance the stroke is re-duced when incorporating bumpers. This varies with operating pressure as indicated in the table. Example: 1.50 NL PB9 x 0.50" stroke. Bumpers both ends cylinder will have a working stroke of 0.43" instead of 0.50" operating at 80 psi. For special applications call the factory.

NOTES:

Bumpers shorten actual strokes and are not practical on short stroke with low operating pressure.

Bumpers on Cap End or Both Ends will add the “BC” length in chart to “C” dimension (rod extension).

Bumpers on Double End Cylinders will add the “BR” length in chart to the “C” dimension (rod extension).

* Not available on spring extend.

Stroke Reduction (in.) Using BumpersBore Dia.

Bumper Location

Dim.Operating Pressure (PSI)

0 20 40 60 80 100

0.56

Cap End BC 0.03 0.02 0.02 0.01 0.01 0.01

Head End BR 0.07 0.07 0.06 0.06 0.05 0.04

Both Ends BB 0.10 0.09 0.08 0.07 0.06 0.05

0.75

Cap End BC 0.07 0.07 0.06 0.05 0.05 0.04

Head End BR 0.07 0.06 0.05 0.05 0.04 0.03

Both Ends BB 0.14 0.13 0.11 0.10 0.09 0.07

1.12

Cap End BC 0.10 0.09 0.09 0.07 0.07 0.06

Head End BR 0.10 0.09 0.08 0.07 0.07 0.06

Both Ends BB 0.20 0.18 0.17 0.14 0.14 0.12

1.50

Cap End BC 0.11 0.10 0.09 0.08 0.07 0.06

Head End BR 0.10 0.08 0.08 0.07 0.06 0.06

Both Ends BB 0.21 0.18 0.17 0.15 0.13 0.12

2.00

Cap End BC 0.11 0.09 0.08 0.07 0.06 0.05

Head End BR 0.10 0.08 0.06 0.06 0.06 0.05

Both Ends BB 0.21 0.17 0.14 0.13 0.12 0.10

2.50

Cap End BC 0.08 0.06 0.05 0.03 0.03 0.03

Head End BR 0.10 0.07 0.06 0.05 0.05 0.04

Both Ends BB 0.18 0.13 0.11 0.08 0.08 0.07

3.00

Cap End BC 0.10 0.06 0.04 0.03 0.02 0.01

Head End BR 0.14 0.09 0.08 0.08 0.07 0.07

Both Ends BB 0.24 0.15 0.12 0.11 0.09 0.08

4.00

Cap End BC 0.10 0.08 0.05 0.03 0.03 0.02

Head End BR 0.21 0.15 0.13 0.12 0.11 0.11

Both Ends BB 0.31 0.23 0.18 0.15 0.14 0.13


E61

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

ESeal Kits (Lipseal Piston)

Bore Size

Rod Dia.

Single Rod Cylinders

Class 1 Seals Part No.


9/16 1/4" KS05LPL251 KS05LPL255

3/4 5/16" KS07LPL311 KS07LPL315

1-1/8 1/2" KS12LPL501 KS12LPL505

1-1/2 5/8" KS15LPL621 KS15LPL625

2 3/4" KS20LPL751 KS20LPL755

2-1/2 3/4" KS25LPL751 KS25LPL755

3 7/8" KS30LPL871 KS30LPL875

4 1" KS40LPL101 KS40LPL105

Seal Kits (Standard Piston)

Bore Size

Rod Dia.

Single Rod Cylinders



9/16 1/4" SKS05LP251 SKS05LP255

3/4 5/16" SKS07LP311 SKS07LP315

1-1/8 1/2" SKS12LP501 SKS12LP505

1-1/2 5/8" SKS15LP621 SKS15LP625

2 3/4" SKS20LP751 SKS20LP755

2-1/2 3/4" SKS25LP751 SKS25LP755

3 7/8" SKS30LP871 SKS30LP875

4 1" SKS40LP101 SKS40LP105

Catalog 0900P-E

Service Kits


E62

C086


E

Catalog 0900P-E

Notes


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

C05 & C05S SeriesShort Stroke Pneumatic Cylinders

ContentsFeatures ............................................................................E64Ordering Information..........................................................E65Product Specifications .......................................................E66Basic Cylinder Dimensions ................................................E67

Short Stroke Pneumatic CylindersC05 and C05S Series

E64

C086


E

Catalog 0900P-E

Features

Cylinders, type C05 and C05SCompact short stroke cylinders available in single and double acting versions. Ideally suited for clamping and locking operations, the range includes bores from 8 to 63 mm, providing thrust forces of up to 3000 N.

The design has been optimized to include the following features:

InstallationThe compact design (with mounting holes through the cylinder body) makes the unit easy to install in confined spaces.

Clean designThe main body is machined from one piece, thus providing an easy to clean unit. Stainless steel piston rods are standard for corrosion resistance.

Maintenance freeThe units are pre-lubricated for use without additional lubrication, reducing maintenance costs and providing an improved working environment.

Piston rod with internal thread.

Compact installation dimensions.

Simple attachment with 2 or 4 through-going tapped attachment holes.

Clean external design.


E65

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

C05S 10

Stroke, mm

50

Piston Rod, mmCylinder type

C05 Double acting Ø12-Ø63

C05S Single acting

Model Code

Cylinder Bore

8 8mm

12 12mm

20 20mm

32 32mm

50 50mm

63 63mm

Catalog 0900P-E


Cylinder Type

Bore Size

Piston Rod

Port Size

Stroke

Double ActingC05

12 5/- M5 10

20 10/M5 M5 10

32 12/M6G1/8 10

G1/8 25

50 16/M8 G1/4 25

63 16/M8 G1/4 25

Single ActingC05S

8 4/- M5 4

12 5/- M5 4

20 10/M5 G1/8 4

32 12/M6 G1/8 5

50 16/M8 G1/4 10

63 16/M8 G1/4 10

16– – –


E66

C086


E

Catalog 0900P-E

Specifications

NoteAll technical data in this catalog is typical data only.

NoteAir quality is essential for maximum cylinder service life (see ISO 8573).

ImportantBefore attempting any external or internal work on the cylinder or any connected components, make sure the cylinder is vented and dis connect the air supply in order to ensure isolation of the air supply.

Performance SpecificationsWorking pressure Max 10 bar (145 PSI)Working temperature -20°C to +70°C (-4°F to +158°F)

Pre-lubricated, further lubrication is not normally necessary.If additional lubrication is introduced it has to be continued.

Material SpecificationsCylinder housing Black anodized aluminiumFront end cover BrassFront end cover, single action Ø50-63 Black anodized aluminiumPiston rod bearing single action Ø50-63 Brass/PTFE/leadPiston, Ø8-32 mm Stainless steelPiston, Ø50-63 mm AluminiumPiston rod Stainless steelSeals Nitrile, NBRCirclip Steel springReturn spring Surface treated steel spring

Quick Reference

CylinderCylinder Piston Rod

Theoretical Forceat 6 Bar (N) Air 1)

Consumption(I)

Spring Force (N)Stroke(mm)

Mass Weight

(kg)Bore(mm)

Area(cm2)

Dia.(mm)

Area(cm2)

Extend Retract Max. Min.

C05S-8-4-4 8 0.5 4 0.13 28 — 0.0045 — — 4 0.016

C05S-12-5-4 12 1.1 5 0.20 65 — 0.0099 — — 4 0.023

C05S-20-10-4 20 3.1 10 0.79 184 — 0.0151 — — 4 0.067

C05S-32-12-5 32 8.0 12 1.13 463 — 0.0653 — — 5 0.192

C05S-50-16-10 50 19.6 16 2.01 1145 — 0.1695 — — 10 0.416

C05S-63-16-10 63 31.1 16 2.01 1825 — 0.2602 — — 10 0.663

C05-12-5-10 12 1.1 5 0.20 68 56 0.0186 3 2 10 0.045

C05-20-1 0-10 20 3.1 10 0.79 190 143 0.0505 7 3 10 0.125

C05-32-12-10 32 8.0 12 1.13 480 415 0.1236 10 6 10 0.320

C05-32-12-25 32 8.0 12 1.13 480 415 0.1236 25 19 25 0.400

C05-50-16-25 50 19.6 16 2.01 1180 1060 0.3167 42 35 25 0.675

C05-63-16-25 63 31.1 16 2.01 1870 1750 0.4982 58 45 25 0.800

1) Consumption of free air per 10 mm stroke for a double stroke at 600 kPa (6 bar).

!


E67

C086


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

Catalog 0900P-E

Basic Cylinder Dimensions

Single Acting

Type A B C D E F G H I J K L M N O P R

C05S-8-4-4 20 16 18 0* 11 5.5 6 3.4 3.4 M5 5.0 4 — 13.5 — 17 —

C05S-12-5-4 25 16 20 0* 13 7.0 6 3.4 3.4 M5 6.0 5 — 15.0 — 17 —

C05S-20-10-4 40 20 32 0* 20 9.0 10 5.0 5.5 G1/8 9.5 10 M5 24.0 8 21 —

C05S-32-12-5 55 26 45 0* 32 14.0 10 5.0 5.5 G1/8 9.5 12 M6 32.0 12 27 9

C05S-50-16-10 80 30 65 50 50 22.5 11 6.5 6.5 G1/4 11.0 16 M8 47.5 12 31 14

C05S-63-16-10 90 35 80 62 62 19.0 15 9.0 9.0 G1/4 11.0 16 M8 50.0 14 36 14

Double Acting

Type A B C D E F G H I J K KA KB L M N O P R

C05-12-5-10 25 27 20 0* 13 7,0 6 3.4 3.4 M5 6.0 13.0 3 5 — 16.0 — 28 —

C05-20-10-10 40 30 32 0* 20 9,0 10 5.0 5.5 M5 6.0 16.0 6 10 M5 24.0 8 31 —

C05-32-12-10 55 36 45 0* 32 14,0 10 5.0 5.5 G1/8 9.5 16.5 14 12 M6 32.0 12 37 9

C05-32-12-25 55 51 45 0* 32 14,0 10 5.0 5.5 G1/8 9.5 31.5 0** 12 M6 32.0 12 52 9

C05-50-16-25 80 50 65 50 50 22,5 11 6.5 6.5 G1/4 11.0 28.0 0** 16 M8 47.5 12 51 14

C05-63-16-25 90 55 80 62 62 19,0 15 9.0 9.0 G1/4 11.0 33.0 0** 16 M8 50.0 14 56 14

* Only two mounting holes (F).** Connections in-line.

C

N

RE

FD

KKA

J

KB

A

M IGØL

B

H

OP

C

N6

RE

FD

K

J

A

M IGØL

B

H

OP


E68

C086


E

Catalog 0900P-E

Notes


LP

(M)

C05

(S)

P1G

P1M

P1M

To

olin

g P

late

P1M

S

win

g C

lam

p

E

P1G Series Cartridge Cylinders

ContentsFeatures ............................................................................E70Ordering Information..........................................................E70Technical Information .........................................................E70Dimensions ........................................................................E70

Cartridge CylindersP1G Series

E70

C086


E

Features

Ordering InformationExample: P1G-S006SS-10

Technical InformationTemperature: -4°F to +176°F (-20°C to +80°C)

Pressure: max. 102 PSI (7 bar) min. 29 PSI (2 bar)

Use clean air.Avoid side loads on the piston rod.Avoid loading the piston rodduring retraction.Do not operate the cylinders withexcessive inertia.

Caution

Ø Retract Extended

6 1.5 4

10 2.5 6

16 4.5 11

Spring Forces (N)

ØStrokes

5 10 15

6 10 13 15

10 27 32 36

16 70 78 87

Weights (g)

Ø A ØB C D E FG

H JKVA/F

KV1 M N5 10 15

6 M10 X 1 8.5 M5 M3 X 0.5 9 5 18.5 25.5 32.5 9.0 9 14 5.5 3 2.4

10 M15 X 1.5 13.0 M5 M4 X 0.7 14 5 20.5 27.0 34.0 11.5 11 19 7.0 4 3.2

16 M22 X 1.5 19.0 M5 M5 X 0.8 20 6 23.5 29.5 36.0 14.0 12 27 8.0 5 4.0

Dimensions

Nut –Nickel PlatedSteel

Bushing –Nickel PlatedBrass

Spring –Stainless Steel

Piston Rod Seal

Piston Rod –Stainless Steel

Non LubeOperation

Nut –Nickel Plated Brass

Body –Nickel Plated Brass

N KV

E

D C ØB A

KV1

J

H G

M

F

!

Catalog 0900P-E

Features

Dimensions (mm)

Bore Size

006 6mm

010 10mm

016 16mm

P1G-S 006 SS- 10

Stroke

05 5mm

10 10mm

15 15mm

Pneumatic Actuator ProductsGeneral Information

P6 Parker Hannifin CorporationPneumatic DivisionWadsworth, Ohio www.parker.com/pneumatics

P

Before selecting or using Parker (The Company) cylinders or related accessories, it is important that you read, understand and follow the following safety informa-tion. Training is advised before selecting and using The Company’s products.

1.0 General Instructions 1.1 Scope – This safety guide provides instructions for selecting and using

(including assembling, installing, and maintaining) cylinder products. This safety guide is a supplement to and is to be used with the specific Company publications for the specific cylinder products that are being considered for use.

1.2 Fail Safe – Cylinder products can and do fail without warning for many reasons. All systems and equipment should be designed in a fail-safe mode so that if the failure of a cylinder product occurs people and property won’t be endangered.

1.3 Distribution – Provide a free copy of this safety guide to each person responsible for selecting or using cylinder products. Do not select or use The Company’s cylinders without thoroughly reading and understanding this safety guide as well as the specific Company publications for the products considered or selected.

1.4 User Responsibility – Due to very wide variety of cylinder applications and cylinder operating conditions, The Company does not warrant that any particular cylinder is suitable for any specific application. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The hydraulic and pneumatic cylinders outlined in this catalog are designed to The Company’s design guidelines and do not necessarily meet the design guideline of other agencies such as American Bureau of Shipping, ASME Pressure Vessel Code etc. The user, through its own analysis and testing, is solely responsible for:

• Making the final selection of the cylinders and related accessories.

• Determining if the cylinders are required to meet specific design requirements as required by the Agency(s) or industry standards covering the design of the user’s equipment.

• Assuring that the user’s requirements are met, OSHA requirements are met, and safety guidelines from the applicable agencies such as but not limited to ANSI are followed and that the use presents no health or safety hazards.

• Providing all appropriate health and safety warnings on the equipment on which the cylinders are used.

1.5 Additional Questions – Call the appropriate Company technical service department if you have any questions or require any additional information. See the Company publication for the product being considered or used, or call 1-800-CPARKER, or go to www.parker.com, for telephone numbers of the appropriate technical service department.

2.0 Cylinder and Accessories Selection 2.1 Seals – Part of the process of selecting a cylinder is the selection of

seal compounds. Before making this selection, consult the “seal information page(s)” of the publication for the series of cylinders of interest.

The application of cylinders may allow fluids such as cutting fluids, wash down fluids etc. to come in contact with the external area of the cylinder. These fluids may attack the piston rod wiper and or the primary seal and must be taken into account when selecting and specifying seal compounds.

Dynamic seals will wear. The rate of wear will depend on many operating factors. Wear can be rapid if a cylinder is mis-aligned or if the cylinder has been improperly serviced. The user must take seal wear into consideration in the application of cylinders.

2.2 Piston Rods – Possible consequences of piston rod failure orseparation of the piston rod from the piston include, but are not limited to are:

• Piston rod and or attached load thrown off at high speed.

• High velocity fluid discharge.

• Piston rod extending when pressure is applied in the piston retract mode.

Piston rods or machine members attached to the piston rod may move suddenly and without warning as a consequence of other conditions occurring to the machine such as, but not limited to:

• Unexpected detachment of the machine member from the piston rod.

• Failure of the pressurized fluid delivery system (hoses, fittings, valves, pumps, compressors) which maintain cylinder position.

• Catastrophic cylinder seal failure leading to sudden loss of pressurized fluid.

• Failure of the machine control system.

Follow the recommendations of the “Piston Rod Selection Chart and Data” in the publication for the series of cylinders of interest. The suggested piston rod diameter in these charts must be followed in order to avoid piston rod buckling.

Piston rods are not normally designed to absorb bending moments or loads which are perpendicular to the axis of piston rod motion. These additional loads can cause the piston rod to fail. If these types of additional loads are expected to be imposed on the piston rod, their magnitude should be made known to our engineering department.

The cylinder user should always make sure that the piston rod is securely attached to the machine member.

On occasion cylinders are ordered with double rods (a piston rod extended from both ends of the cylinder). In some cases a stop is threaded on to one of the piston rods and used as an external stroke adjuster. On occasions spacers are attached to the machine member connected to the piston rod and also used as a stroke adjuster. In both cases the stops will create a pinch point and the user should consider appropriate use of guards. If these external stops are not perpendicular to the mating contact surface, or if debris is trapped between the contact surfaces, a bending moment will be placed on the piston rod, which can lead to piston rod failure. An external stop will also negate the effect of cushioning and will subject the piston rod to impact loading. Those two (2) conditions can cause piston rod failure. Internal stroke adjusters are available with and without cushions. The use of external stroke adjusters should be reviewed with our engineering department.

The piston rod to piston and the stud to piston rod threaded connections are secured with an anaerobic adhesive. The strength of the adhesive decreases with increasing temperature. Cylinders which can be exposed to temperatures above +250°F (+121°C) are to be ordered with a non studded piston rod and a pinned piston to rod joint.

2.3 Cushions – Cushions should be considered for cylinder applications when the piston velocity is expected to be over 4 inches/second.

Cylinder cushions are normally designed to absorb the energy of a linear applied load. A rotating mass has considerably more energy than the same mass moving in a linear mode. Cushioning for a rotating mass application should be review by our engineering department.

2.4 Cylinder Mountings – Some cylinder mounting configurations may have certain limitations such as but not limited to minimum stroke for side or foot mounting cylinders or pressure de-ratings for certain mounts. Carefully review the catalog for these types of restrictions.

Always mount cylinders using the largest possible high tensile alloy steel socket head cap screws that can fit in the cylinder mounting holes and torque them to the manufacturer’s recommendations for their size.

2.5 Port Fittings – Hydraulic cylinders applied with meter out or deceleration circuits are subject to intensified pressure at piston rod end.

The rod end pressure is approximately equal to:

operating pressure x effective cap end area

effective rod end piston area

Contact your connector supplier for the pressure rating of individual connectors.

3.0 Cylinder and Accessories Installation and Mounting

3.1 Installation

3.1.1 – Cleanliness is an important consideration, and cylinders are shipped with the ports plugged to protect them from contaminants entering the ports. These plugs should not be removed until the piping is to be installed. Before making the connection to the cylinder ports, piping should be thoroughly cleaned to remove all chips or burrs which might have resulted from threading or flaring operations.

Safety Guide for Selecting and Using Hydraulic, Pneumatic Cylinders and Their Accessories

WARNING: FAILURE OF THE CYLINDER, ITS PARTS, ITS MOUNTING, ITS CONNECTIONS TO OTHER OBjECTS, OR ITS CONTROLS CAN RESULT IN: • Unanticipated or uncontrolled movement of the cylinder or objects connected to it. • Falling of the cylinder or objects held up by it. • Fluid escaping from the cylinder, potentially at high velocity.THESE EVENTS COULD CAUSE DEATH OR PERSONAL INjURY BY, FOR EXAMPLE, PERSONS FALLING FROM HIGH LOCATIONS, BEING CRUSHED OR STRUCK BY HEAVY OR FAST MOVING OBjECTS, BEING PUSHED INTO DANGEROUS EQUIPMENT OR SITUATIONS, OR SLIPPING ON ESCAPED FLUID.

!

Catalog 0900P-E

Safety Guide



P

3.1.2 – Cylinders operating in an environment where air drying materials are present such as fast-drying chemicals, paint, or weld splatter, or other hazardous conditions such as excessive heat, should have shields installed to prevent damage to the piston rod and piston rod seals.

3.1.3 – Proper alignment of the cylinder piston rod and its mating component on the machine should be checked in both the extended and retracted positions. Improper alignment will result in excessive rod gland and/or cylinder bore wear. On fixed mounting cylinders attaching the piston rod while the rod is retracted will help in achieving proper alignment.

3.1.4 – Sometimes it may be necessary to rotate the piston rod in order to thread the piston rod into the machine member. This operation must always be done with zero pressure being applied to either side of the piston. Failure to follow this procedure may result in loosening the piston to rod-threaded connection. In some rare cases the turning of the piston rod may rotate a threaded piston rod gland and loosen it from the cylinder head. Confirm that this condition is not occurring. If it does, re-tighten the piston rod gland firmly against the cylinder head.

For double rod cylinders it is also important that when attaching or detaching the piston rod from the machine member that the torque be applied to the piston rod end of the cylinder that is directly attaching to the machine member with the opposite end unrestrained. If the design of the machine is such that only the rod end of the cylinder opposite to where the rod attaches to the machine member can be rotated, consult the factory for further instructions.

3.2 Mounting Recommendations

3.2.1 – Always mount cylinders using the largest possible high tensile alloy steel socket head screws that can fit in the cylinder mounting holes and torque them to the manufacturer’s recommendations for their size.

3.2.2 – Side-Mounted Cylinders – In addition to the mounting bolts, cylinders of this type should be equipped with thrust keys or dowel pins located so as to resist the major load.

3.2.3 – Tie Rod Mounting – Cylinders with tie rod mountings are recommended for applications where mounting space is limited. The standard tie rod extension is shown as BB in dimension tables. Longer or shorter extensions can be supplied. Nuts used for this mounting style should be torqued to the same value as the tie rods for that bore size.

3.2.4 – Flange Mount Cylinders – The controlled diameter of the rod gland extension on head end flange mount cylinders can be used as a pilot to locate the cylinders in relation to the machine. After alignment has been obtained, the flanges may be drilled for pins or dowels to prevent shifting.

3.2.5 – Trunnion Mountings – Cylinders require lubricated bearing blocks with minimum bearing clearances. Bearing blocks should be carefully aligned and rigidly mounted so the trunnions will not be subjected to bending moments. The rod end should also be pivoted with the pivot pin in line and parallel to axis of the trunnion pins.

3.2.6 – Clevis Mountings – Cylinders should be pivoted at both ends with centerline of pins parallel to each other. After cylinder is mounted, be sure to check to assure that the cylinder is free to swing through its working arc without interference from other machine parts.

4.0 Cylinder and Accessories Maintenance, Troubleshooting and Replacement

4.1 Storage – At times cylinders are delivered before a customer is ready to install them and must be stored for a period of time. When storage is required the following procedures are recommended.

4.1.1 – Store the cylinders in an indoor area which has a dry, clean and noncorrosive atmosphere. Take care to protect the cylinder from both internal corrosion and external damage.

4.1.2 – Whenever possible cylinders should be stored in a vertical position (piston rod up). This will minimize corrosion due to possible condensation which could occur inside the cylinder. This will also minimize seal damage.

4.1.3 – Port protector plugs should be left in the cylinder until the time of installation.

4.1.4 – If a cylinder is stored full of hydraulic fluid, expansion of the fluid due to temperature changes must be considered. Installing a check valve with free flow out of the cylinder is one method.

4.1.5 – When cylinders are mounted on equipment that is stored outside for extended periods, exposed unpainted surfaces, e.g. piston rod, must be coated with a rust-inhibiting compound to prevent corrosion.

4.2 Cylinder Trouble Shooting

4.2.1 – External Leakage

4.2.1.1 – Rod seal leakage can generally be traced to worn or

damaged seals. Examine the piston rod for dents, gouges or score marks, and replace piston rod if surface is rough.

Rod seal leakage could also be traced to gland wear. If clearance is excessive, replace rod bushing and seal. Rod seal leakage can also be traced to seal deterioration. If seals are soft or gummy or brittle, check compatibility of seal material with lubricant used if air cylinder, or operating fluid if hydraulic cylinder. Replace with seal material, which is compatible with these fluids. If the seals are hard or have lost elasticity, it is usually due to exposure to temperatures in excess of 165°F. (+74°C). Shield the cylinder from the heat source to limit temperature to 350°F. (+177°C.) and replace with fluorocarbon seals.

4.2.1.2 – Cylinder body seal leak can generally be traced to loose tie rods. Torque the tie rods to manufacturer’s recommendation for that bore size.

Excessive pressure can also result in cylinder body seal leak. Determine maximum pressure to rated limits. Replace seals and retorque tie rods as in paragraph above. Excessive pressure can also result in cylinder body seal leak. Determine if the pressure rating of the cylinder has been exceeded. If so, bring the operating pressure down to the rating of the cylinder and have the tie rods replaced.

Pinched or extruded cylinder body seal will also result in a leak. Replace cylinder body seal and retorque as in paragraph above.

Cylinder body seal leakage due to loss of radial squeeze which shows up in the form of flat spots or due to wear on the O.D. or I.D. – Either of these are symptoms of normal wear due to high cycle rate or length of service. Replace seals as per paragraph above.

4.2.2 – Internal Leakage

4.2.2.1 – Piston seal leak (by-pass) 1 to 3 cubic inches per minute leakage is considered normal for piston ring construction. Virtually no static leak with lipseal type seals on piston should be expected. Piston seal wear is a usual cause of piston seal leakage. Replace seals as required.

4.2.2.2 – With lipseal type piston seals excessive back pressure due to over-adjustment of speed control valves could be a direct cause of rapid seal wear. Contamination in a hydraulic system can result in a scored cylinder bore, resulting in rapid seal wear. In either case, replace piston seals as required.

4.2.2.3 – What appears to be piston seal leak, evidenced by the fact that the cylinder drifts, is not always traceable to the piston. To make sure, it is suggested that one side of the cylinder piston be pressurized and the fluid line at the opposite port be disconnected. Observe leakage. If none is evident, seek the cause of cylinder drift in other component parts in the circuit.

4.2.3 – Cylinder Fails to Move the Load

4.2.3.1 – Pneumatic or hydraulic pressure is too low. Check the pressure at the cylinder to make sure it is to circuit requirements.

4.2.3.2 – Piston Seal Leak – Operate the valve to cycle the cylinder and observe fluid flow at valve exhaust ports at end of cylinder stroke. Replace piston seals if flow is excessive.

4.2.3.3 – Cylinder is undersized for the load – Replace cylinder with one of a larger bore size.

4.3 Erratic or Chatter Operation

4.3.1 – Excessive friction at rod gland or piston bearing due to load misalignment – Correct cylinder-to-load alignment.

4.3.2 – Cylinder sized too close to load requirements – Reduce load or install larger cylinder.

4.3.3 – Erratic operation could be traced to the difference between static and kinetic friction. Install speed control valves to provide a back pressure to control the stroke.

4.4 Cylinder Modifications, Repairs, or Failed Component – Cylindersas shipped from the factory are not to be disassembled and or modified. If cylinders require modifications, these modifications must be done at company locations or by The Company’s certified facilities. The Cylinder Division Engineering Department must be notified in the event of a mechanical fracture or permanent deformation of any cylinder component (excluding seals). This includes a broken piston rod, tie rod, mounting accessory or any other cylinder component. The notification should include all operation and application details. This information will be used to provide an engineered repair that will prevent recurrence of the failure.

It is allowed to disassemble cylinders for the purpose of replacing seals or seal assemblies. However, this work must be done by strictly following all the instructions provided with the seal kits.

Catalog 0900P-E

Safety Guide



P

Catalog 0900P-E

Offer of Sale

1. TermsandConditions. Seller’s willingness to offer Products, or accept an order for Products, to or from Buyer is subject to these Terms and Conditions or any newer version of the terms and conditions found on-line at www.parker.com/saleterms/. Seller objects to any contrary or additional terms or conditions of Buyer’s order or any other document issued by Buyer.2. Price Adjustments; Payments. Prices stated on Seller’s quote or other documentation offered by Seller are valid for 30 days, and do not include any sales, use, or other taxes unless specifically stated, Unless otherwise specified by Seller, all prices are F.C.A. Seller’s facility (INCOTERMS 2010). Payment is subject to credit approval and is due 30 days from the date of invoice or such other term as required by Seller’s Credit Department, after which Buyer shall pay interest on any unpaid invoices at the rate of 1.5% per month or the maximum allowable rate under applicable law.3. DeliveryDates;TitleandRisk;Shipment. All delivery dates are approximate and Seller shall not be responsible for any damages resulting from any delay. Regardless of the manner of shipment, title to any products and risk of loss or damage shall pass to Buyer upon placement of the products with the shipment carrier at Seller’s facility. Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and means of delivery. No deferment of shipment at Buyers’ request beyond the respective dates indicated will be made except on terms that will indemnify, defend and hold Seller harmless against all loss and additional expense. Buyer shall be responsible for any additional shipping charges incurred by Seller due to Buyer’s acts or omissions.4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for a period of twelve months from the date of delivery to Buyer or 2,000 hours of normal use, whichever occurs first. The prices charged for Seller’s products are based upon the exclusive limited warranty stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTYCOMPRISESTHESOLEANDENTIREWARRANTYPERTAININGTOPRODUCTSPROVIDED HEREUNDER. SELLER DISCLAIMS ALL OTHER WARRANTIES,EXPRESSANDIMPLIED,INCLUDINGDESIGN,MERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.5. Claims;CommencementofActions. Buyer shall promptly inspect all Products upon delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days of delivery. No other claims against Seller will be allowed unless asserted in writing within 30 days after delivery. Buyer shall notify Seller of any alleged breach of warranty within 30 days after the date the defect is or should have been discovered by Buyer. Any action based upon breach of this agreement or upon any other claim arising out of this sale (other than an action by Seller for an amount due on any invoice) must be commenced within 12 months from the date of the breach without regard to the date breach is discovered.6. LIMITATIONOFLIABILITY.UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. INNOEVENTSHALLSELLERBELIABLETOBUYERFORANYSPECIAL,INDIRECT,INCIDENTALORCONSEQUENTIALDAMAGESARISINGOUTOF,ORASTHERESULTOF,THESALE,DELIVERY,NON-DELIVERY,SERVICING,USEORLOSSOFUSEOFTHEPRODUCTSORANYPARTTHEREOF,ORFORANYCHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’SWRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER INCONTRACT,TORTOROTHERLEGALTHEORY.INNOEVENTSHALLSELLER’SLIABILITYUNDERANYCLAIMMADEBYBUYEREXCEEDTHEPURCHASEPRICEOFTHEPRODUCTS.7. User Responsibility. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and Product and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application and follow applicable industry standards and Product information. If Seller provides Product or system options, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems.8. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two consecutive years have elapsed without Buyer ordering the items manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control.9. SpecialTooling. A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the Products, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time.10. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or otherwise, Seller shall retain a security interest in the goods delivered and this agreement shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute and file on Buyer’s behalf all documents Seller deems necessary to perfect its security interest.11. Improper use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright

TheitemsdescribedinthisdocumentandotherdocumentsanddescriptionsprovidedbyParkerHannifinCorporation,itssubsidiariesanditsauthorizeddistributors(“Seller”)areherebyofferedforsaleatpricestobeestablishedbySeller.Thisofferanditsacceptancebyanycustomer(“Buyer”)shallbegovernedbyallofthefollowingTermsandConditions.Buyer’sorderforanyitemdescribedinitsdocument,whencommunicatedtoSellerverbally,orinwriting,shallconstituteacceptanceofthisoffer.Allgoodsorworkdescribedwillbereferredtoas“Products”.

infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees, or any other person, arising out of: (a) improper selection, improper application or other misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; or (d) Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify Buyer under any circumstance except as otherwise provided.12. Cancellations and Changes. Orders shall not be subject to cancellation or change by Buyer for any reason, except with Seller’s written consent and upon terms that will indemnify, defend and hold Seller harmless against all direct, incidental and consequential loss or damage. Seller may change product features, specifications, designs and availability with notice to Buyer.13. LimitationonAssignment. Buyer may not assign its rights or obligations under this agreement without the prior written consent of Seller.14. ForceMajeure. Seller does not assume the risk and shall not be liable for delay or failure to perform any of Seller’s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter “Events of Force Majeure”) Events of Force Majeure shall include without limitation: accidents, strikes or labor disputes, acts of any government or government agency, acts of nature, delays or failures in delivery from carriers or suppliers, shortages of materials, or any other cause beyond Seller’s reasonable control.15. WaiverandSeverability. Failure to enforce any provision of this agreement will not waive that provision nor will any such failure prejudice Seller’s right to enforce that provision in the future. Invalidation of any provision of this agreement by legislation or other rule of law shall not invalidate any other provision herein. The remaining provisions of this agreement will remain in full force and effect.16. Termination. Seller may terminate this agreement for any reason and at any time by giving Buyer thirty (30) days written notice of termination. Seller may immediately terminate this agreement, in writing, if Buyer: (a) commits a breach of any provision of this agreement (b) appointments a trustee, receiver or custodian for all or any part of Buyer’s property (c) files a petition for relief in bankruptcy on its own behalf, or by a third party (d) makes an assignment for the benefit of creditors, or (e) the dissolves or liquidates all or a majority of its assets.17. Governing Law. This agreement and the sale and delivery of all Products hereunder shall be deemed to have taken place in and shall be governed and construed in accordance with the laws of the State of Ohio, as applicable to contracts executed and wholly performed therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out of or relating to this agreement. 18. IndemnityforInfringementofIntellectualPropertyRights. Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (“Intellectual Property Rights”). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If a Product is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using the Product, replace or modify the Product so as to make it noninfringing, or offer to accept return of the Product and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to Products delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder. The foregoing provisions of this Section shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intellectual Property Rights.19. Entire Agreement. This agreement contains the entire agreement between the Buyer and Seller and constitutes the final, complete and exclusive expression of the terms of sale. All prior or contemporaneous written or oral agreements or negotiations with respect to the subject matter are herein merged.20. CompliancewithLaw,U.K.BriberyActandU.S.ForeignCorruptPracticesAct. Buyer agrees to comply with all applicable laws and regulations, including both those of the United Kingdom and the United States of America, and of the country or countries of the Territory in which the Buyer may operate, including without limitation the U. K. Bribery Act, the U.S. Foreign Corrupt Practices Act (“FCPA”) and the U.S. Anti-Kickback Act (the “Anti-Kickback Act”), and agrees to indemnify and hold harmless Seller from the consequences of any violation of such provisions by Buyer, its employees or agents. Buyer acknowledges that they are familiar with the provisions of the U. K. Bribery Act, the FCPA and the Anti-Kickback Act, and certifies that Buyer will adhere to the requirements thereof. In particular, Buyer represents and agrees that Buyer shall not make any payment or give anything of value, directly or indirectly to any governmental official, any foreign political party or official thereof, any candidate for foreign political office, or any commercial entity or person, for the purpose of influencing such person to purchase products or otherwise benefit the business of Seller. 02/12

pneumatic actuator productsdynamicfluid.com/images/catalogues/parker/pneumatic...rotary actuators pv...

Documents