· speedcem ® plus the self ... as per manufacturer’s instructions. • after try-in, apply...
TRANSCRIPT
CAD/CAMchairside
Telio® CAD
IPS e.max® ZirCAD
IPS Empress®
Tetric CAD®
CAD
Zirconium oxide ceramics (ZrO2)For: Crowns and bridgesStrength: Up to 1,200 MPa
Leucite glass-ceramics
Aesthetic composite block
For: Inlays, onlays, veneers and crowns
For: Inlays, onlays, veneers and crowns
Strength: 272 MPa
Strength: 185 MPa
NEW
NEW
IPS e.max® CADLithium disilicate glass-ceramics (LS2)For: Crowns, bridges, inlays, onlays, veneers, partial crowns and implant-supported hybrid restorationsStrength: 530 MPa
Cross-linked PMMA materialFor: Temporary crowns, bridges and hybrid abutment crowns Strength: 130 MPa
Everything for chairside CAD/CAM restorations
2018TOP AWARDWINNER
For your most aesthetic requirements The Dental Advisor gives Top rating for IPS e.max PressAfter a clinical evaluation period of seven years, the noted US-based dental test institute The Dental Advisor selected IPS e.max Press for the “Long-Term Performer: Ceramic” award!
Ground breaking innovations.Proven solutions.Natural aesthetics.
Programat® CS4
Glazing, crystallisation and sintering furnace
Programat® CS2
Glazing and crystallisation furnace
with colour touch screen
Glazing and crystallisation furnace with
colour touch screen and Digital Shade
Assistant
Programat® CS3
15 min. 15 min. 17 min. 37 min.IPS e.max® CAD IPS e.max® CAD IPS e.max® CAD IPS e.max® ZirCAD
Speed Programme
Programat® – for optimum firing results
All-ceramics
2 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
CAD/CAMchairside
Telio® CAD
IPS e.max® ZirCAD
IPS Empress®
Tetric CAD®
CAD
Zirconium oxide ceramics (ZrO2)For: Crowns and bridgesStrength: Up to 1,200 MPa
Leucite glass-ceramics
Aesthetic composite block
For: Inlays, onlays, veneers and crowns
For: Inlays, onlays, veneers and crowns
Strength: 272 MPa
Strength: 185 MPa
NEW
NEW
IPS e.max® CADLithium disilicate glass-ceramics (LS2)For: Crowns, bridges, inlays, onlays, veneers, partial crowns and implant-supported hybrid restorationsStrength: 530 MPa
Cross-linked PMMA materialFor: Temporary crowns, bridges and hybrid abutment crowns Strength: 130 MPa
Everything for chairside CAD/CAM restorations
For your most aesthetic requirements The Dental Advisor gives Top rating for IPS e.max PressAfter a clinical evaluation period of seven years, the noted US-based dental test institute The Dental Advisor selected IPS e.max Press for the “Long-Term Performer: Ceramic” award!
Full report: https://www.dentaladvisor.com/evaluations/ips-e-max-press-5-yr-2018-product-award/
Programat® CS4
Glazing, crystallisation and sintering furnace
Programat® CS2
Glazing and crystallisation furnace
with colour touch screen
Glazing and crystallisation furnace with
colour touch screen and Digital Shade
Assistant
Programat® CS3
15 min. 15 min. 17 min. 37 min.IPS e.max® CAD IPS e.max® CAD IPS e.max® CAD IPS e.max® ZirCAD
Speed Programme
Tetric CAD – The Aesthetic Composite BlockTetric CAD is an aesthetic composite block for efficiently manufactured single-tooth restorations. Due to their exceptional chameleon effect, Tetric CAD restorations adapt harmoniously to the surrounding tooth substance. After milling, the restoration is polished and adhesively seated. This process is very efficient and leads easily and quickly to an aesthetically pleasing result.
• 5x MT shades & 4x HT shades• Sizes C14 & I12 • Proven stability in their layer thicknesses
All-ceramics
30508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Cementation
SpeedCEM® PlusThe self-adhesive resin cementSpeedCEM Plus is a self-adhesive, self-curing, resin cement with optional light-curing, offering an ideal combination of performance and user-friendliness.
Not every restoration can be completely and evenly cured with light. Strong self-curing capabilities offer an additional measure of reliability when seating opaque or non-translucent restorations. SpeedCEM Plus produces high bond strength values on zirconium oxide, base metal alloys and on dentine without light activation. This has been confirmed in internal and external studies.
SpeedCEM Plus is used for the permanent cementation of crowns and bridges on natural teeth and on implant abutments:
• Oxide ceramics such as zirconium oxide, e.g. IPS e.max® ZirCAD• Metal and metal-based restorations• Lithium disilicate glass-ceramics, e.g. IPS e.max®
A BIG PLUS
FOR ZIRCONIAIdeal for
IPS
ZirCAD
®
e.max
Refills1x Automix syringe SpeedCEM Plus, 9g
15x Mixing tips, 5x Root canal tips
681710WW SpeedCEM Plus Refill, Yellow
681711WW SpeedCEM Plus Refill, Opaque
681712WW SpeedCEM Plus Refill, Transparent
Refill pack of 3 - Transparent3x Automix syringes SpeedCEM Plus, 9g
45x Mixing tips, 15x Root canal tips
692422WW SpeedCEM Plus Refill, Transparent 3x 9g
• Zirconia restoration should be treated* as per manufacturer’s instructions.
• After try-in, apply Ivoclean to the internal surface of the restoration and let stand for 20 sec.
• Rinse and dry.
• No primer is needed for SpeedCEM Plus on zirconia.
• Apply SpeedCEM Plus cement directly into the restoration.
* Generally performed by the laboratory.
Adequate retention is required.
Remove residue of temporary cement• Clean the tooth preparation with a
polishing brush and Proxytprophy paste.
® fluoride-free
• Rinse & lightly dry. Avoid overdrying.
After try-in: clean the preparation• In case of saliva contamination, please
clean again.
• After seating, light-cure each quarter surface for 1 sec. The cement will achieve a gel-like consistency for easy clean-up.
• Excess material can be easily removed with a scaler.
• Utilise Liquid Strip to avoid oxygen-inhibited layer.
• Light-cure all margins for 20 sec.
• Rinse off Liquid Strip.
• Finish the proximal surfaces and polish the restoration margins with e.g. OptraPol.
PREPARE CLEAN & CEMENT CLEAN UP FINAL CURE FINISH
+ Excellent self-cure performance + User-friendly with easy clean-up + Efficient process with just one component
CONTAINS
MDP
Yellow Opaque Transparent
4 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Small Equipment Cementation
Ivoclean®
For the effective cleaning of indirect restorationsThe bonding action of adhesive and self-adhesive systems can be impaired if the restoration is contaminated with saliva after try-in. Cleaning with water, alcohol or phosphoric acid does not always produce the desired clean bonding surface. Ivoclean effectively cleans the contact surfaces, creating ideal conditions for achieving a reliable bond between the luting material and restoration.
SUPER
SPECIAL!
Recommended
for use with
SpeedCEM PlusRecommended for
Zirconia
clean water phosphoric acid Ivoclean
70
60
50
40
30
20
10
0Lithium disilicate(IPS e.max CAD)
Tensile bond strength in MPa after 24 hours(Multilink Automix and Monobond Plus)
Zirconium oxide(IPS e.max ZirCAD)
Following saliva contamination cleaned with: R&D Ivoclar Vivadent AG,Schaan, Liechtenstein, 2011
Multilink® Hybrid AbutmentThe specialist in cementing Abutment Solutions• Establishes a strong, durable bond in combination with Monobond Plus • Two levels of opacity for optimum aesthetics • Easy handling due to the convenient Automix syringe• 647182AN – High Opacity
647183AN – Medium Opacity
MO 0 HO 0
Hybrid abutment crown cemented with Multilink Hybrid Abutment HO 0 (2) compared to a crown cemented with a luting material featuring regular opacity (1).
Multilink Hybrid Abutment is applied to the titanium base.
In addition to the opacity level MO 0 used in the past, Multilink Hybrid Abutment is also available in a highly opaque HO 0 shade. This shade ensures an optimum aesthetic outcome even in challenging cases, such as the cementation of IPS e.max® LT hybrid abutment crowns on titanium bases.
Monobond PlusUniversal primer for all restorative materials.
• Strong and durable bond• Universal reaction time of 60 seconds• Can be stored at room temperature
50508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
It’s never been easier to get your practice digital ready!
Equipment
Bluephase Meter IIDental radiometerBluephase Meter II is a precise radiometer for easy verification of curing light intensity.
With the help of the Bluephase Meter II, the light intensity [in mW/cm2] as well as the light power [in mW] can be measured quickly and accurately at any time. Readings are obtained in three simple steps: Measure the diameter of the light probe using the template on the back. Enter the value and illuminate the sensor.
Bluephase Meter II is suitable for all types of curing lights.
An insufficient light cure can have two possible causes:
Light-curing
1. The light intensity emitted by the curing light is inadequate (e.g. because of a technical defect).
Check the light intensity regularly using a reliable measuring device (radiometer) such as a Bluephase Meter II to be sure that you are getting the correct amount of light. As the light intensity is always measured in relation to the light emission window, the diameter of the light guide should first be determined and then entered into the radiometer. If the curing light emits a light intensity of less than 400 mW/cm2, we recommend buying a new one.
2. The initiator system of the filling material Some composites respond to a different wavelength range than the one covered by your curing light. You should make sure that the emission spectrum of your curing light matches the relevant wavelength range of the product you are using. Universal curing lights covering a broad wavelength range (385 – 515nm), such as the Bluephase Style with integrated polywave technology, are especially useful here.
Note: Fillings that are not properly cured may cause postoperative sensitivities. We therefore recommend that you should measure the light intensity of your curing device at least twice a year because you will not be able to see, with the naked eye, if the light intensity of your curing device is too low.
Contact your local Territory Manager for a FREE light testing demonstration
The template on the rear of the radiometer assists in determining the diameter of circular light guides.
The size of the diameter is then entered into the radiometer.
The digital display is activated automatically when the curing light is switched on.
SPECIAL
PRICE
6 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
It’s never been easier to get your practice digital ready!
Digital
Equipment | CAM
Material
Scanners | CAD
Equipment | CAM
Material
Scanners | CAD
Equipment | CAM
Material
Scanners | CAD
*Trade up to: TRIOS 3 Pod, TRIOS 3 Cart, TRIOS Pod, TRIOS Cart,Trade in : Apollo/Red Cam, Blue Cam/Omnicam, iTero, 3M True Definition, Lava C.O.S. , MHT, Lythos, Orametrix Ora-scanner, IOS scanner, PlanScanConditions apply.
TRADE your old Intra-oral Scanner*
PrograMill OneThe compact, 5-axis milling machine designed to mill beautiful, aesthetic IPS e.max® restorations.
• Take control of your patient’s restorations in a single visit. • Innovative 5- axis Technology provides short milling times. • App driven for easy operation and high automation.
Materials – more optionsLithium disilicate, zirconium oxide, PMMA and composite – all these material blend seamlessly into your digital work routines.
TRIOS® MOVE The brand-new hardware setup places the 3Shape TRIOS scanner, monitor and PC on the lightweight, fully-adjustable, ergonomic 3Shape TRIOS MOVE. 3Shape TRIOS MOVE mobility enables doctors to always position the screen in the right place to provide a superior experience for both dentist and patient.
NEW
8 FULL
TIME TEAM
MEMBERS in
Australia and
New Zealand
CONTACT ONE OF US TODAY ON 0508 486 252 TO ORGANISE A DEMONSTRATION, AND SEE HOW EASY IT IS TO GO DIGITAL
70508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Prosthetics
Choose to make your patient smile with Ivoclar Vivadent teeth
Ivoclar Vivadent
Teeth
SR Vivodent S PE/S DCL
Ivostar/Gnathostar
SR Phonares IIS PE in 20 Pearl Effect shades
S DCL In 16 A–D and 4 Bleach shades
Exceptional lifelike aesthetics
Premium quality
Innovative tooth mould concept - soft or bold - youthful, universal or mature
Available in A-D and Chromascop shades Harmonised layering of PMMA structureThe economically optimised selection
NEW
SR Phonares II
& SR Vivodent S PE/
S DCL are integrated
into Ivoclar Vivadent’s
Digital Workflow
Living Mould Guide Specials Everything you need to select the right mould and shades for a patient specific smile
One set of all the mouldsOne shade guide
8 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Prosthetics
Two tooth lines –one aesthetic result
SR Vivodent® S PE | S DCL
Simply brilliant!
Anterior tooth characteristicsDesigned by nature, tried-and-tested a million times overThe anterior moulds are designed to meet the essential requirements that every modern denture tooth should fulfil:
Harmonious enamel covering on all sides, providing room for creativity in the setup of anterior teeth
Wide tooth neck to cover structural elements
Specially designed interdental closures for enhanced white aesthetics
Today's patients place a great deal of value on aesthetics. That's why I use SR Vivodent S PE – for a successful combination of naturalness and strength.
Pasquale Lacasella, Italy
„„
SR Vivodent S PE20 PE shades
SR Vivodent S DCL16 A–D and 4 Bleach shades
The PE shades reflect the shade characteristics typically found in older patients.
A–D and Bleach shades are frequently used in combination prosthetics.
Ask your Laboratory for Ivoclar Vivadent Denture Teeth
NEW A-D
SHADES
90508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Restorative
Adhese® UniversalUniversal adhesion with advanced delivery
How do you know when dentine is wet enough for bonding?After the etching procedure, the exposed collagen fibres on the dentine surface should be encapsulated by a homogeneous and thin layer of adhesive to achieve a stable bond to the tooth. For this to happen, the tooth surface must not be overly dry. Otherwise, the collagen fibres may collapse. Collagen collapse is a phenomenon that may occur after phosphoric acid etching as the collagen fibres are exposed. The collagen fibres cannot be seen by the naked eye. It is therefore difficult to evaluate if or when the dentine surface has become too dry.
Some adhesives fail to infiltrate over dried collagen fibres properly and this may lead to a significant reduction in bond strength. Adhesives such as Adhese® Universal are based on a combination of water and ethanol as the solvent to restore moisture to collagen fibres that have collapsed because of desiccation.
This type of adhesive is suitable for both wet and dry bonding techniques.
Suitable for direct and indirect restorative applications.
Collagen fibres are in a vertical position if an adequate degree of moisture is present on the dentine surface.
Collagen fibres collapse if the dentine has become excessively dry.
The universal adhesive Adhese® Universalmoistens collapsed collagen fibres evenly.
10 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Restorative
Photos: Dr Eduardo Mahn
Build-up of the palatal enamel wall with Enamel material
Dentine core and mamelons
Incorporation of special effects
between mamelonsand on the incisal edge
Final (top) enamel layer
Final incisal layer with translucent Effect material
Intuitive layering system for highly aesthetic resultsults
emoceb nac enoynAa master at creating
highly aesthetic composite restorations
in only five steps.Dr Eduardo Mahn, Director Clinical Research,
Universidad de los Andes Santiago, Chile
“ “
Enamel materials
Dentine materials
Translucent materials, flowable Effect materials
R&D Ivoclar Vivadent AG, Schaan, 2016
IPS Empress® DirectHigh Aesthetics, Easy Handling
IPS Empress Direct - the highly aesthetic anterior and posterior filling material is available in 32 colours to create a variety of anatomical features and replicate nature.
The shade system logically follows the anatomical structure of the tooth:
• 13 opaque dentine shades for reproducing dentine and mamelon areas, and for placing cervical fillings in older patients
• 16 translucent enamel shades designed for replacing enamel• 3 highly translucent materials for characterisation on the incisal edges
– Translucent Shades (Flowable ‘Effect’ Shades) – Enamel Shades – Dentine Shades
Now with optimised handling characteristics:• Cavifil contents are easy to extrude• Material does not stick to the instrument• Excellent adaptation to the cavity walls• Outstanding polishability
Opaque
0.5 mm1 %
DentineA2
7– 8 %*
EnamelA2
13 –15 %*
Trans20
20 %*
Trans30
30 %*
TransOpal
45 %*
* Sample value, Technical Data Sheet, Ivoclar Vivadent AG
Highest quality starts with simplicity
Due to the logical arrangement of the shade system, IPS Empress Direct is incredibly easy to use. Dentine replaces dentine and enamel replaces enamel. The extensive shade range comprises a suitable combination of materials for all clinical shade requirements. Two autoclavable shade guides assist in the selection of the precise enamel and dentine shade.
HIGH AESTHETICS
EASY HANDLING
110508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Avoid sticky situations
Clinical Accessories
Astropol®
Composite PolishingThe Astropol polishing system is a comprehensive finishing and polishing set that embraces three grit sizes and four differently shaped polishers for interdental and occlusal applications:
Astropol F (Finish)For the removal of excess material and pre-polishing applications.
Astropol P (Polish)Is designed for the polishing of restorations. Astropol P ensures a smooth surface finish and helps achieve first-class results particularly in conjunction with micro-filled composite materials.
Astropol HP (High-gloss Polish)Ideal for creating smooth, highly lustrous surfaces. These polishers are particularly recommended for hybrid composites such as IPS Empress® Direct, Tetric® EvoCeram or Tetric® EvoFlow.
“Lustrous results in
three easy steps!”
Step 1: Finishing with Astropol F
Step 2: Polishing with Astropol P
Step 3: High gloss polishing with Astropol HP
As recommended by Dr Stefan Koubi
Optrasculpt® PadA contouring instrument with special foam pad attachments, designed for the efficient, non-stick forming and shaping of composites. Also ideal for holding indirect restorations in place during polymerisation.
• Faster contouring due to non-stick attachments• Reduced effort required for finishing and polishing• Reduced adhesion of the composite to the instrument• No instrument marks on the restoration surface• Suitable for the build-up of direct veneers or large Class IV restorations
12 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Impression
“Create your own Impressive Impressions“
Virtual® A hydrophilic precision VPS impression material offering exceptional detail reproduction and an efficient balance of physical properties. The Virtual impression system has a balanced portfolio in a wide range of tray and wash materials with your choice of fast set or regular set. From crown and bridge to implant impressions, the Virtual impression system has you covered featuring:
• Excellent adaptation to the moist oral hard and soft tissues
• Easy to read colour combination• Flexible working times and fast setting phase• Outstanding balance of physical properties• High level of stability for multiple pours• High tear strength• Excellent moisture displacement• Exceptional readability and precision• Fresh peppermint scent• No special activation required • Quick dispensing of ready-mixed material
• Available in Fast or Regular set Extra Light Body, Light Body, Monophase, Heavy Body
ChromaX AlginateHigh precision alginate with chromatic phase indicator.• Excellent dimensional stability allows casting of the impressions
after 5 days • Stabilised hypoallergenic formula• Very high compressive strength and recovery from deformation • Vanilla flavour• Pale blue colour• 5-year shelf life
CONSISTENCY TECHNIQUEacc. to ISO 4823
Virtual Extra Light Body Type 3 Putty/wash impression Low viscosity (Heavy/light impression)
Virtual Light Body Type 3 Heavy/light impression Low viscosity (Putty/wash impression)
Virtual Monophase Type 2 Single phase impression Medium viscosity
Virtual Heavy Body Type 1 Heavy/light impression High viscosity
Virtual Putty Type 0 Putty/wash impression Kneadable, very high viscosity (Heavy/light impression)
130508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Preventative
Fluor Protector SSuperior protection against dental caries and erosionThis innovative varnish system features a homogeneous fluoride source ensuring immediate availability of the fluoride. The entire dose of fluoride contained in Fluor Protector S is available in a very short time and as a result, dental enamel is directly and effectively supplied with fluoride. Safe and effective for all ages.
Special propertiesFluoride and its concentration are not the only factors that provide clinical success. Properties such as the homogeneous distribution of its components (i.e. fluoride), depot formation, viscosity, flow and wetting properties, adhesion as well as aesthetics determine the quality of a fluoride varnish.
Homogeneous solutionFluor Protector S contains fluoride in a homogeneous solution, rendering it ready for immediate application. This is in contrast to inhomogeneous preparations which need to be mixed before use. In this case, it is difficult to ensure that the insoluble particles are evenly distributed.
Immediate fluoridation of enamelA homogeneously dissolved fluoride source with 7700 ppm ensures the entire dose of fluoride is available within a very short time. The fluoride concentration amplifies once dried (approx. 4-times higher concentration after setting).
High-Yielding fluoride depotAfter the application of Fluor Protector S, finely distributed calcium fluoride-like particles form on the teeth. During acid attacks, these particles break down into calcium and fluoride. The dense covering layer acts as a depot from which fluoride and calcium are released over an extended period. Consequently, the acids cannot directly attack the teeth.
Low viscosity for complex surfacesThe low viscosity of Fluor Protector S provides optimum flow and wetting properties. In contrast to thick, viscous fluoride varnishes, Fluor Protector S is easy to distribute. Furthermore, it readily flows into complex surface structures and is readily absorbed.
Fast and Effective Application
Fluor Protector S vs. the competitorsYou can clearly see Fluor Protector S is thin, clear and completely homogenous unlike the competitor varnishes.
* Not a registered trademark of Ivoclar Vivadent.
Fluor Protector S (Ivoclar Vivadent)
Vanish Varnish* (3M ESPE)
Profluorid Varnish* (VOCO)
White Varnish* (NUPRO®)
Fluor Protector S
Fluor Protector S Duraphat* Clinpro White Varnish*
Ml Varnish*
Fluo
ride
[µg/
cm2 ]
45
40
35
30
25
20
15
10
5
0
Focus on topical fluoride application
Alkaline-soluble fluoride on the enamel surface one hour after the application of various fluoride varnishes (Ivoclar Vivadent, R&D 2011)
*Not registered trademarks of Ivoclar Vivadent
Negative control
Bifluoride*10%
Immediate Availability of Fluoride
Is your
fluoride varnish
delivering as
promised?
A low-viscosity fluoride varnish such as Fluor Protector S spreads easily and penetrates into porous surfaces.
A high-viscosity fluoride varnish sits on the surface of the tooth. Absorption is poor.
Enamel surface High-viscosity fluoride varnish
Low-viscosity fluoride varnish
Enamel surface
A low-viscosity fluoride varnish such as Fluor Protector S spreads easily and penetrates into porous surfaces.
A high-viscosity fluoride varnish sits on the surface of the tooth. Absorption is poor.
Enamel surface High-viscosity fluoride varnish
Low-viscosity fluoride varnish
Enamel surface
14 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Anaesthetic
Septanest 4%Available in 2.2ml
• Articaine HCI 4% with adrenaline 1:100,000 for local and regional anaesthesia
• Duration: Pulpal 45 - 75 min Soft tissue: 180 - 300 min
• Half life: 20 - 30 min• pH: 4 - 5.5
Lignospan Special 2%Available in 2.2ml
• Lignocaine Hydrochloride 2% with Adrenaline 1:80,000
• Duration: Pulpal 60 min Soft tissue 180 – 300 min
• Half life: 90 min• pH: 3 - 5.5
ScandonestScandonest Special 2%• Mepivacaine Hydrochloride 2%
with Adrenaline 1:100,000• Duration:
Pulpal 45 - 60 min Soft tissue 120 - 240 min
• Half life: 110 min• pH: 3.3 - 5.5• 1.8ml (734141)
2.2ml (734144)
Scandonest 3% Plain• Mepivacaine Hydrochloride 3%• Duration:
Pulpal 5 - 10 min Soft tissue 90 - 120 min
• Half life: 110 min• pH: 6 - 6.8• 1.8ml (734142)
2.2ml (743143)
Septodont Local Anaesthetics
*Must be on one invoice, only one free Alveogyl per account. Limited availability of free stock. Offer on full priced anaesthetic only. Alveogyl valued at $151.00 +GST
Purchase 5x boxes of Local Anaesthetic and receive a FREE* Alveogyl.
150508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Innovative, Safe and Effective Solutions for Dentistry Worldwide
Septodont
Biodentine™
Bioactive Dentine SubstituteThe first biocompatible and bioactive dentine replacement material, Biodentine™ can be used whenever dentine is damaged, both for crown and root applications. It helps the remineralisation of dentine, preserves the pulp vitality and promotes pulp healing.
Indications• In the crown: temporary enamel restoration, permanent dentine
restoration, deep or large carious lesions, deep cervical or radicular lesions, pulp capping, pulpotomy.
• In the root: root and furcation perforations, internal/external resorptions, apexification, retrograde surgical filling.
Features & benefits• Versatile usage: endodontic repair and restorative procedures• Chair time savings due to direct bonding of the composite onto Biodentine™
possible in the same session• Reactionary dentine genesis for pulp vitality preservation• Natural micro mechanical anchorage for excellent sealing properties without
surface preparation and for post operative sensitivity elimination• Similar mechanical properties and mechanical behavior as human dentine for
similar stress distribution• 3.5mm aluminium radiopacity for easy short and long term follow-up
BioRoot™ RCSMineral-based Root Canal SealerBioroot RCS is the new paradigm for endodontic obturations. Its outstanding sealing properties combined with antimicrobial and bioactive properties allow to get a high seal of the endodontium without having to use complex warm gutta techniques.
Indications• Permanent root canal sealer
Features & benefits• Outstanding adhesion to dentine and gutta-percha points• Hydrophilic - BioRoot RCS continues the sealing process in
the presence of moisture• Pure mineral formulation - will not stain teeth• Resin-free - made from pure calcium silicate and is
monomer-free ensuring zero shrinkage• Great flowability - seals auxilliary canals• Uses cold single cone or cold lateral condensation
16 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Burs | Hand Instruments
801314 (FG) shank - Sizes 007 - 027
830314 (FG) shank - Sizes 016 - 023
833314 (FG) shank - Sizes 014 - 023
835314 (FG) shank - Sizes 007 - 018
Unsure which bur you prefer? Contact your local Territory Manager to view their Diamond Bur Wallet.
Meisinger Diamond BursMEISINGER diamond burs consist of a shank and a hardened, stainless profile body coated by means of the most modern galvanizing process with selected diamond grains. This guarantees an extremely homogenous, safe, and lasting diamond coating of the instruments and thus optimal working results. In addition of up to seven different grain sizes.
Forceps & ElevatorsMade in England from the highest quality stainless steels to ensure top performance and long life.
INDENT OFFER… ORDER NOW FOR DELIVERY IN 8 – 10 WEEKS
* Free item of equal or lesser value. Must be on one invoice.
Nova Instruments are constructed from the finest quality stainless steel by experienced precision engineers, Nova instruments are made to exacting standards. These hand made instruments are manufactured in line with rigorous specifications and each individual instrument is thoroughly checked and tested at each stage of the manufacturing process, ensuring that all instruments are perfect before they reach you.
170508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Garrison | Carestream
FitStrip™
Interproximal Finishing and Contouring System FitStrip is indicated for use in IPR, contact reduction, interproximal finishing and contouring, crown and bridge cement removal/clean up, as well as separating inadvertently bonded teeth.
Both single sided and double sided strips feature the unique ability to be adjusted from straight (for contact reduction) to curved (for interproximal contouring) with a simple twist of the colour coded barrel, reducing hand fatigue. The interchangeable handle easily attaches to any of the FitStrip components, significantly improving clinician ease of use and patient comfort.
• Super fine – 15µm/0.11 (Yellow) • Fine – 30µm/0.15 (Red)• Medium – 46µm/0.21 (Blue)• Coarse – 90µm/0.30 (Green)• Serrated – 0.05 thick
Twist the colour-coded barrel toadjust FitStrips’ curvature and it’s automatically locked in place.
FitStrips’ simple, detachable handle means your hand stays outside the mouth, granting a clear field of view and easier operation.
FitStrips are very durable and long lasting. They stay sharp and ready to go even after multiple autoclave cycles.
Please contact our Equipment Team on 0508 IVOCLAR for a demonstration
Revolutionise the process of creating a dental impression with the CS 3600 Fast, easy, open intraoral scanning is in your handsThe CS 3600 puts smart scanning in your hands: whether your practice handles restorative, orthodontic or implant cases, the CS 3600 adapts to your needs by making digital impression capture fast and easy.
• Implant planning made easy• Open .STL and .PLY files allow you to use third-party
design software• Sharing with the lab of your choice is simple and
straight-forward
18 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Equipment
Images indicative only.
All A-dec Dental Chairs are available in your choice of traditional or continental delivery systems
Still going strong…
Performer® Dental Chairs
The A-dec Dynamic Seating System
We’ve got your back…
A-dec 500 Dental StoolsNot to mention everything else.The ability to perform your job comfortably is essential. And the new feature-rich A-dec 500 stools have you covered. Based on a unique dynamic seating system design, individual performance zones work in unison to conform and move with your body. With an ultimate ergonomic solution like this, you can focus on what’s really important—your patients.
Performer dental chairs claim a long history in dental practices worldwide. Fully ambidextrous, they now boost productivity with a richer feature set, seamless integration of clinical devices, and updated styling. Performer answers the call for a value option, yet holds up to years of shared use by the entire dental team.
American
Association of
Women Dentists
190508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Equipment
Images indicative only.
Equipment
CONTACT US ABOUT A COMPLETE ANTHOS SURGERY SOLUTION FOR YOUR PRACTICE!
Anthos A5 More than VersatileToday, the configuration range on the Anthos A5 is wider than ever. Free to configure the Anthos A5 as they see fit, dentists can adapt it to their specific needs to create a valuable tool that provides the practicality, performance and reliability that is so essential in their profession.
A VARIETY OF VERSIONSFree to configure the Anthos A5 as they see fit, dentists can adapt it to their specific needs to create a valuable tool that provides the practicality, performance and reliability that is so essential in their profession.
PERSONALISE YOUR Anthos A5With a range of micromotors, scalers, etc that perfectly complement your operating style.
PATIENT COMFORTBackrests. There is also the choice between a wide, comfortable backrest or a more compact version that makes more space available around the patient.
Anatomical padding. Patient comfort is maximised by anatomical padding that provides optimal support, especially welcome during long treatment sessions.
ASSISTINA - The automatic processor you can trust to provide reliable, optimal cleaning & oiling at the touch of a button, EVERY TIME!
20 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Equipment
Images indicative only.
Visit www.ivoequip.co.nz for more information
Assistina 3x3 It is simple and easy to use. The ASSISTINA 3x3 automatically removes organic deposits from external surface of each handpiece. It thoroughly cleans the internal spray water and air channels PLUS the internal transmission mechanism effectively removing all organic debris throughout.
The 3x3 delivers precise lubrication to maintain the handpiece and air-dries it, all completed in just 6 ½ minutes, for as little as 15 cents per cycle.
• Triple port• Externally cleans • Internally cleans air, water spray channels & the internal gear mechanism• Lubricates all transmission parts• Quick, only 6 minutes processing time for up to 3 instruments per cycle • Cost effective • Validated Process. Complies with NZDC Infection Prevention and Control Practice
Standard Recommendation
Prolong the service life of your expensive Straight, Contra-angled & Turbine Handpieces with W&H ASSISTINA
ASSISTINA - The automatic processor you can trust to provide reliable, optimal cleaning & oiling at the touch of a button, EVERY TIME!
Top quality & performanceTwo high-speed head sizes are available for surprising access options. And a special coating improves aesthetics even more – and extends their life.
Ultimate price-performance ratioProven Synea quality has never been so economical: With the Synea Fusion line W&H has developed a range of instruments in which economy is as important as quality.
TG 97L & TG 98L (736580, 736587)
TK 94L (676736) • For minimally invasive treatments, especially
for patients with reduced mouth opening
TK 97L & TK 98L (676735, 736599)• With increased power and reduced sound level
TK 100L (676737)• Specifically for crown & bridge removal
SAVE… on Synea Vision & Fusion Turbines
210508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Equipment
Images indicative only.
Visit www.ivoequip.co.nz for more information
Hyperion X5The first suspended 2D system, the world’s smallest, now available for your surgery.
RXDC eXTENDMaximum image quality, minimum dose for the patient. RXDC - eXTend technology always provides sharp images, a full configuration range and the exclusive flexibility of wireless technology.• Automatic parameter modulation ensures the best exposure power/time selection• Attention to patient health is meticulous: a high frequency, constant potential generator
minimises exposure times and reduces harmful radiation• No downtimes as a result of tube overheating, not even when repeated use is required• ALWAYS-SHARP IMAGES – The focal spot of just 0.4 mm is placed in the tube head
in such a way as to obtain a source-to-skin gap of 30 cm (total bulk remaining equal).
X5 2D• Focus-free Panoramic• Quick Pan• Dentition & Bitewing• Temporomandibular Joints
Hyperion X5, the only suspended imaging system, easy to install and use, can be mounted on any wall suitable for housing an intraoral X-ray system. Quick and easy to use at every stage of the examination, this system ensures high resolution 2D images and low emission times plus fast data processing for real time diagnosis and improved patient communication.
A new 2D Imaging Experience.
• Compact & Light• Plug & Play• Setting-free• Easy to use• Real-Time Diagnostics• Mini Budget
22 0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
Equipment
Images indicative only.
Visit www.ivoequip.co.nz for more information
Dürr Duo CompressorMembrane drying unit• 2-cylinder V-motor
and 20 litre tank• For maximum of two workstations
EMS AIRFLOW® ONE The Swiss Made AIRFLOW® One: designed for intensive professional use, characterised by unique ergonomics, high precision, easy maintenance and ... with the highest standards of performance, safety and comfort in mind, being specifically built to cater to 2 of the 3 core treatments of the Guided Biofilm Therapy (GBT).
Cattani PULI-JET Gentle Daily disinfection of your suction system is vital to keep your suction lines clean and maintain your equipment and suction unit. PULI-JET Gentle strength as a disinfectant means that it kills bacteria, helping to maintain a safer work environment.
PULI-JET Gentle leaves a residue on the inside of pipes and suction tubes in order to stop bacterial growth on these surfaces – preventing blockages and unpleasant odours.
Dürr Tyscor VS Suction System - WetlineMembrane drying unit• VS Central Comb Suction with Radial Technology• For maximum of two workstations
RRRR
230508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Prices exclude GST, freight & installation, and may change without notice. E & OE.
CHRISTCHURCHPhone: 03 366 0025Fax: 03 377 1625
AUCKLAND (Head Office)Phone: 09 914 9999Fax: 09 914 9990
Email: [email protected]
Prices do not include GST or freight & may change without notice • Prices are not applicable to Government, Corporate or Overseas Accounts • Prices valid from 1 April- 31 May 2018 These specials are available while stocks last or until the next publication of IVOMAIL • E & OE • Images and specifications in this publication are representative – please confirm all details on your individual purchase(s)
FRIDAY 18 - SATURDAY 19 MAY 2018
ANZ Viaduct Events Centre 161 Halsey Street
Viaduct Basin, Auckland
Ivoclar Vivadent Professional Development 2018
3D Endodontic Instrumentation and Obturation
1-day Lecture & Hands-on
Friday 29 June 2018 - Queenstown
Friday 6 July 2018 - Auckland
Dr Hani Naoum
Digital Restorative Dentistry2-day Hands-on
Thursday 14 - Friday 15 June 2018 - Auckland
Dr Andrea Shepperson
Conservative and biologically sound 3D endodontic instrumentation and obturation using the latest advances in instrument design and filling materials.
Understand the power of digital technology in restorative dentistry, scan, mill and cement a monolithic all-ceramic restoration in a 2-day hands-on course.
If you are new to digital dentistry, or considering integration into your practice, this course will give hands-on experience in a simulation clinic, and assist in the transition to a full digital workflow.
To register for these events, and to see the full calendar of courses and programmes for New Zealand, please visit: www.ivoclarvivadent.co.nz/icdelearn
Introducing Ivoclar Vivadent’s NEW Online Ordering
Orders delivered Freight Free*
Visit www.ivoclarvivadent.co.nz to register
REGISTER
TODAY!
* Standard exclusions apply.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz