The SP-200 and SP-120plotters are specially designed forplotting and cutting pattern pieces.Ideal for design centers and in-house design departments, SP-Series plotters are used to create,check or revise pattern pieces andnests, and plot component piecesand mini-markers.These plotters arecompatible with all AccuMarkTM andAccuMark SilhouetteTM systems.The SP-200 is the solution forcompanies that demand an accuratepattern plotter/cutter that can beused on pattern board (card), plasticor paper up to 0.5 mm (0.02 in.).

Used with Gerber pattern designproducts, the SP-200 providesoptimum media utilization increating layouts, making it extremelycost-effective.The flatbed design tiltsfor ease of use and saves onvaluable floor space.

The compact SP-120 standupplotter uses continuous roll paperto plot and cut pattern pieces andnests. Quiet running and precise, theSP-120 plots and cuts at speeds upto 60cm/sec.The SP-120 freesdesigners of tedious, repetitive andtime-consuming cutting tasks,

allowing them to concentrate ontheir more important design functions.

Pattern designers everywhere areturning to Gerber Technology fortheir pattern development needs.

SP-Series plotters lowerproduction costs because of theirhigh speed and accuracy in plottingand cutting pattern pieces that areright the first time.

Plot and cut pattern pieces fast and accurately

Plotter/Cutters

SP-200 / SP-120SP-200 / SP-120

SP-200 SP-120

SP-200Product Specifications

SP-120Product Specifications

Key Features

• Paper patterns can be plotted or cuton a single machine without manuallychanging tools

• Compact size with minimal floorspace requirements

• Touch-sensitive operator controlpanel

• 32 bit CPU with 2MB local memoryfor improved speed and total systemthroughput

• 2 mounted tools- Roller Ball Pen and.9mm knife

• Variable width paper support• Roll feed capability for 1220 mm (48

in) wide paper• Height adjustable 0.9 mm cutting

blade for paper cutting

Approximately 2,068 x 837 mm (81 x 33 in.) 60° tiltAccess clearance must be providedaround the unit for paper loading andmaintenance.

Installed WeightApproximately 80 kg (177 lbs.)including stand

Power Requirements115/230 VAC +/-10% single phase at47-63 Hz 160 VA

Operating EnvironmentTemperature: 10°-35°C (50°-95°F)Humidity: 35%-75% (non-condensing)

AccuMark / WinPlot Compaibility

• Version 8.1.3 or later (v.8.1.2supported with hotfix)

Paper

• Media widths 160 to 270, 300 to 400,440 to 540, 580 to 680, 710 to 810,850 to 950, 990 to 1090, 1120 to1220 mm

• Roll core diameter: 2-inch, 3-inch• Maximum media width 7.5 cm (3 in)

core: 1220 mm (48 in), 5 cm (2 in)core: 1180 mm (46.5 in)

• Maximum loadable media length100m (109yds) roll

• Media types Fine quality (bond) paperfor apparel patterns 64 to 130 g/m29(35lb)

Cutting Speed• Maximum cutting speed 60 cm/s

(23.5 in/sec)• Maximum acceleration 13.9 m/s2

(45.6 ft/s2) 45° direction

Interface• RS-232 (serial cable included)• WinPlot supported file types (GEN,

DXF, NC, HPGL)

Floorspace Requirements• Approximate external dimensions

(W x D x H) 1487 x 1020 x 1189mm (58.5 x 40.5 x 47 in)

Installed Weight• Approximately 43 kg (95 lbs)

including stand and basket

Power Requirements• Rated power supply 100 to 120 VAC,

200 to 240 VAC, 50/60 Hz• Power consumption 100 VA

Operating Environment• 10 to 35°C (50 to 95° F), 35 to 75% RH• Conditions for precision 16 to 32°C

(60-90° F), 35 to 70% RH

Specifications are subject to changewithout notice.

AccuMarkTM, AccuMark AccelTM, AccuMark SilhouetteTM,GERBERmarkerTM and GERBERplotterTM are trademarks ofGerber Technology.

Key Features• Cuts pattern board (card), paper or

plastic up to 0.5 mm (0.02 in.)• Tilt table minimizes floorspace

requirements• High-speed motors for plot and cut

speeds up to 300 mm/sec.(12 ips)

• Touch-sensitive operator controlpanel

• Microprocessor with local memoryfor improved speed and total systemthroughput

• Water-based 0.3 mm ballpoint pensavailable for plotting on paper orpattern board

• Two-height adjustable cutting toolswith supersteel blades provided,0.9 mm paper, 1.5 mm pattern board

Plotter• Self-restoring vinyl cutting surface• Electrostatic media hold-down for

quiet, efficient positioning of patterns• Standard RS-232C• HPGL emulation• Automatic power-up self-test features• Built-in diagnostic utilities• Includes 12 m (40 ft.) cable to a

GERBERmarkerTM system computer

Media• Maximum media width 1,010 mm

(39.4 in.)• Maximum cutting area 920 x 1,740mm

(36.22 x 68.5 in.)

Option0.3 mm water-based fiber-tip pens

Paper RollsUp to 165 mm (6.5 in.) outer diameter,76 mm (3 in.) inner diameter. Paper rollsupport provided for 914 mm (36 in.)maximum width roll

AccuMark SoftwareAccuMark Accel version 7.2 or later

Floorspace RequirementsApproximately 2,068 x 1,285 mm (81 x 50.6 in.) no tilt

Gerber Technology24 Industrial Park Road WestTolland, Connecticut 06084 USATel: +1(860) 871-8082Fax: +1(860) 871-6007www.gerbertechnology.cominfo@gerbertechnology.com

Copyright © 2005 Gerber TechnologyA Gerber Scientific CompanyForm No. SP120-SP200-211005