PLATT MR655 SHIELDED RING MOUNTFor use with: M2HB 12.7mm heavy machine gun

Mk 19 40mm automatic grenade launcherMAG-58/M240 7.62mm general purpose machine gun

Minimi/M249 light machine gun

A modular, readily upgradeable protected weapon station for light and medium armoured vehicles

PL

AT

T M

R6

55

Currently

servi

ng with US an

d

Coalitio

n force

s in th

e MEAO

Platt MR655 Shielded Ring Mount

The Platt MR655 Shielded Ring Mount is a modular protected gun ring designed for armoured vehicles equipped with light, medium and heavy machine guns or 40mm automatic grenade launchers. Armoured against 5.56mm and 7.62mm ball in standard configuration, the MR655 Shielded Ring Mount is currently fitted to a variety of wheeled and tracked light armoured vehicles serving with US and Coalition forces in the Middle East Area of Operations.

With the ability to accept numerous armour protection kits and configurations to suit customer requirements, the baseline MR655 Shielded Ring Mount consists of 8.5mm high hardness armoured shields integrated into a highly reliable weather-sealed low-maintenance gun ring for smooth, trouble-free operation in dry and dusty environments. To improve situational awareness, the ring mount shields and front shield can be fitted with ballistic windows. A large armoured inlay hatch with spring assist and combat lock is standard on all versions.

Ease of use and the ability to achieve very high weapon elevation makes the MR655 Shielded Ring Mount ideally suited to operations in complex environments, particularly urban and mountainous terrain. Excellent weapon depression allows for engagement of targets at close ranges.

Reflecting the combat experience of its end users and modular design, the MR655 Shielded Ring Mount is also available with the following options:

• Electric drive gearbox • Elevation arm belly plate • Overhead Protection Kit (OHPK) • Modular A-Frame • Rapid reaction T&E bar • Adapter ring extension • High capacity ammunition magazine

See page 4 for more MR655 Shielded Ring Mount Options and Accessories.

Utilising the highly adaptable “plug and play” nature of its design, the MR655 can also be used as the basis for the new Platt Maximus Twin Mount (pictured left). Both mounts share a common ring bearing.

To meet higher threat levels the MR655 Shielded Ring Mount is able to accept a ceramic-based appliquè armour kit that can be installed to increase protection up to STANAG Level 3.

Alternatively, a bi-metal armour solution (pictured below) consisting of a 6mm HHA inner layer with 4mm UHA outer layer also provides protection to STANAG Level 3.

SP

EC

IF

IC

AT

IO

NS

Overall Length: 1810mm

Overall Width: 1378mm

Overall Height: 670mm

Weight: 405kg

Hatch Opening Diameter: 655mm

Traverse: 360 degrees

Weapon Elevation: +60 degrees

Weapon Depression: -35 degrees

Weapon Compatibility: M2HB 12.7mm HMG; Mk 19 40mm AGL; MAG-58/M240 7.62nn GPMG; Minimi/M249 5.56mm LMG

Platt Part Number: P10101

MR655 Overhead Protection Kit The Platt Overhead Protection Kit (OHPK) provides additional operator protection against threats from all angles, including overhead and behind. Fitted with a hatch, lifting points and able to accommodate ballistic windows, the OHPK is armoured to STANAG 1 in baseline configuration.

The MR655 Shielded Ring Mount when fitted with the Overhead Protection Kit is still able to achieve weapon elevation of +60 degrees.

The MR655 Shielded Ring Mount can be fitted with a variety of armoured adapter ring extensions to provide increased deck/roof clearance as shown above.

Options and Accessories The following options and accessories are available for or as adaptations of the MR655 Shielded Ring Mount.

Electric Drive (Platt Part Number: P10467-RH)

Modular A-Frame (Platt Part Number: P10368-03) Rapid Reaction T&E Bar

OGPK with Platt 40-50 Softmount and Front Shield

MR655 Shielded Ring Mount with High Capacity Ammunition Magazine

Platt Objective Gunner Protection Kit (OGPK)

W&E Platt Pty LtdPO Box 3401, Narellan DC, NSW 2567, Australia

Allan Platt – Tel: + 612 9829 0400 | Mob: + 61 412 004 014 Email: alplatt@plattmounts.com | www.plattmounts.com

Platt Mounts USA Keith Amerson

Tel: + 1 843 303 2702 Email: keith@plattmounts.com

Plattmounts Europe Adrian Mead Tel: + 44 (0) 7812 922 131

Email: adrian.mead@plattmounts.com

Platt Mounts South America Debora Fortkamp

Tel: +61 (0)400 151 643Email: debora@plattmounts.com