plastics - kimw | kunststoffinstitut lüdenscheid · 150 tensile test (modulus) ... iso 1798 371...

International suitability tests

Your laboratory quality for:

� Plastic films

� Thermoplastics

� Foams

� Geosynthetics

� Plastic composites

� Rubber and TPE

� Painted Plastics/

aluminium wheels

� Leather

PlasticsProduct catalogue

2017

Plastics testing and analyses

according to DIN | ISO | VDA | ASTM

In cooperation with QuoData certified -The pioneer of proficiency testing statistics methodology

The Kunststoff-Institut Lüdenscheid has been an established supplier of interlaboratory proficiency tests for many years. The suitability tests are carried out according to the specifi- cations of DIN EN ISO / IEC 17043 in cooperation with QuoData GmbH, and they are suppor-ted by our laboratory accredited according to DIN EN ISO 17025.For the exchange and evaluation of the data, including homogeneity and stability tests as well as the issuing of certificates, we make use of a software system that is established and validated on the market and equipped with the possibility of a comfortable online data inter- face.

Our ring tests cover a wide range of tests and analyses on samples in the plastics sector, including packaging and consumer goods.

� Tailor-made ring trials due to the highest competence in plastics

� high-quality specimen material, tested according to DIN ISO 13528 andrelevant for practical purposes

� Responsible and exact evaluations with certificates by QuoData GmbH

� Participation in proficiency tests are prescribed for laboratories that are accreditedaccording to DIN EN ISO 17025

� Cost-efficient, neutral quality assurance of your laboratory

� Proof of self-competence against third parties

The following pages can be used as a registration form or you can download them on our homepage: www.proficiency-test.info

Your contact person for further information:Dr. Andreas Balster+49 2351 [email protected] Origin of photo material:

©iStock.com/onurdongel©iStock.com/lilcrazyfuzzy

More than 15 years of professional experience

Registration/information

Kunststoff-Institut Lüdenscheid -The supplier for plastics proficiency testing

Your benefit

� Reduction of complaints by means of detailed knowledge of the repeat andcomparative precision

Your advantages:

� Analysis of weak points for preventive avoidance of complaints

Your bonus: Quick and competent help in case of deviations!

Statistical methodsRegarding the evaluation of data, depending on the type of its distribution, we work on the basis of DIN ISO 13528, normally with the robust statistical methodology Q/Hampel. Only in exceptional cases, a conventional statistical methodology with outlier elimination is applied. The laboratory quality is assessed on the basis of so-called z- and zu-scores. At the outset of each trial, the statistical methodology is accurately defined and documented - thus, an objective and neutral assessment is ensured.

Registration for theProficiency Test 2017

Schedule 2017

ISO 1183-1 140 Density ISO 1172 141 Ash content ISO 868 142 Hardness Shore D

ISO 2039-1 143 Ball indentation hardness ASTM D792 144 Density

ISO 527-1/-2 ISO 527-1/-2 ISO 527-1/-2 ISO 527-1/-2

ISO 899-1 ISO 6603-2

ASTM D3763 ISO 604

ISO 179-1/1eU ISO 179-1/1eA

ISO 179-1 DIN 53435 DIN 53435

ISO 180 ISO 178 ISO 178 ISO 178

ISO 6721-5 ASTM D638 ASTM D638 ASTM D790 ASTM D790

150 Tensile test (modulus)151 Tensile test (strength and elongation)152 Tensile test at higher temperature153 Tensile test at low temperature range154 Tensile creep E (1min, 1h, 100h)155 Instrumented impact test179 Instrumented impact test156 Compression test (strength and elongation) 157 Charpy unnotched impact test +23 °C158 Charpy notched impact test +23 °C159 Charpy impact test -30 °C160 Dynstat impact test161 Dynstat 3.5 % flexural stress162 Izod impact properties +23 °C163 Flexural test (modulus)164 Flexural test (3.5 % flexural stress)165 Flexural test (strength and elongation) 166 DMA - Temperature sweep and Tg167 Tensile test (modulus)168 Tensile test (strength and elongation)169 Flexural test (modulus)170 Flexural test (strength and elongation)

ISO 527-1/-2 ISO 178

ISO 179-1

171 Specimens injection moulding and tensile test172 Specimens injection moulding and flexural test 173 Specimens injection moulding and Charpy impact

ISO 527-1/-2 ISO 527-1/-2

174 Cutting of specimens: type 1B and tensile test175 Cutting of specimens: type 5A and tensile test

ISO 527-1/-2 176 Tensile test ISO 178 177 Flexural test

ISO 179-1 178 Charpy flexural impact test

Manufacturing of test specimens type 1A (injection moulding):

Manufacturing of test specimens (cutting):

Mechanical properties of polyamide 6 and 66:

Infrared spectroscopy / Identification of plastics:

Mechanical properties:

Origin of photo material:©iStock.com/ScottPaulsonPhotography

Thermoplastics:Density | Hardness | Ash content:

Dr. Andreas Balster+49 2351 [email protected]

Registration Deadline: 21 March 2017Sample shipment: 27-28 April 2017Reporting Deadline:07 July 2017

no test standard 242 Quantitative Infrared spectroscopy (FTIR)


Schedule 2017

Thermal properties:

Rheological properties:

Burning behaviour:

Tests on plastic pipes:

Water content/water absorption

Emissions:

Origin of photo material:©iStock.com/ScottPaulsonPhotography

ISO 1133 ISO 1133 ISO 307 ISO 307 ISO 307

ISO 1628-5 ISO 11443

ISO 6721-10 ASTM D1238

220 Melt mass-/volume-flow rate (MFR/MVR)228 Melt mass-/volume-flow rate (high temperature > 300 °C) 221 Viscosity number (sulfuric acid)222 Viscosity number (m-cresol)223 Viscosity number (formic acid)224 Viscosity number of PBT225 Fluidity of plastics using capillary rheometers 226 Complex shear viscosity (parallel-plate)227 Melt mass-/volume-flow rate (MFR/MVR)

ISO 11357-3 ASTM D3418 ISO 11357-2 ASTM D3418 ISO 11357-6 ASTM D3895 ISO 11357-7

ISO 11358 ISO 11359

ISO 306 ISO 75

ASTM D1525 ASTM D648

ISO 22007-4

200 DSC-Analysis: Temperature and enthalpy of melting 211 DSC-Analysis: Temperature and enthalpy of melting 201 DSC-Analysis: Glass transition temperature212 DSC-Analysis: Glass transition temperature202 DSC-Analysis: Oxidation Induction time (OIT)203 DSC-Analysis: Oxidation Induction time (OIT)204 DSC-Analysis: Crystallization kinetics205 Thermogravimetry (TGA) - filler content206 Coefficient of linear thermal expansion207 Vicat softening temperature (VST)208 Temperature of deflection under load209 Vicat softening temperature (VST)210 Deflection temperature under flexural load213 Thermal conductivity (Laser flash method)

DIN 75200|FMVSS 302 230 Burning rateUL 94 HB 231 Burning rate

UL 94 V 232 Burning rateDIN EN 60695 233 Glow-wire ignition temperature (GWIT)

ISO 1167-1/-2 240 Resistance to internal pressure (2 temp.)ISO 17454 241 Adhesion of multi layer pipesISO 9969 243 Thermoplastics pipes - ring stiffness

ISO 15512 290 Water content (Karl-Fischer)CaH2-Methode 291 Water content (Aquatrac®)

ISO 62 292 Water absorption

PV 3900|VDA 270 260 Odour testPV 3925|VDA 275 261 Formaldehyde emissionPV 3341|VDA 277 262 Total carbon emission

VDA 278 263 Thermal desorption analysisDIN 75201 264 Fogging/Method A

PV 3015|DIN 75201 265 Fogging/Method B

Fibre length (short glass fibres):

no test standard 266 with static image analysis (e.g. Fibreshape, FASEP)(incl. investigation of different preparation methods)


Schedule 2017



Date

companyadditional linecontact personstreetpost code / city / countryemailVAT-ID (EU)


Origin of photo material:PRILL/Shutterstock.com

ISO 527-3 100 Tensile Test MarchISO 6383-1 101 Tear resistance - trouser tear method MarchISO 6383-2 102 Tear resistance - Elmendorf method March

ISO 15106-3 103 Water vapour transmission rate MarchISO 15105-2 104 Gas transmission rate March

ISO 11339 105 T-peel test MarchISO 4593 106 Film Thickness MarchISO 8295 107 Coefficients of friction (static/kinetic) March

DIN 55529 108 Sealed-seam strength MarchISO 14782 109 Transparency/Haze March


Plastic films:(participation fee: € 280.00 for each method) Shipping

Sample shipment: shipment dates: see above

Registration by e-mail:[email protected] we confirm obligatorily the participation in theabove mentioned test(s).

All above-quoted prices shall be net, plus value-added tax (VAT)

report by post report by emailplease mark with a cross

Schedule 2017


Schedule 2017


Environmental Simulation:(participation fee: € 405.00 for each method)

ISO 105-B06| 250 Light fastness (4-6 cycles)VDA 75202

DIN 75220 D-IN1-T 251 Sunlight simulationISO 9227 252 Corrosion testing on reference specimens (48h)

and painted plates (480 h)(Parameter: e.g. delamination, corrosion, blistering)

ASTM G155 253 Light fastness - Xenon Arc light (cycle 1)ISO 4892-2 254 Light fastness - Xenon Arc light (cycle 1)ISO 4892-3 255 Exposure to laboratory light - Fluorescent UV lamps

ISO 2813 270 Gloss reading at 60° DIN 53236-A (ISO 7724) 271 Colour measurement (8°/d) - ΔE*, ΔL*, Δa*, Δb*

DIN 53236-B 272 Colour measurement (45°/0) - ΔE*, ΔL*, Δa*, Δb*PV 3952 273 Scratch resistance

ISO 1518 274 Erichsen-Hardness pencilDIN 55660-2 275 Surface energy (contact angle)

ISO 4287 276 Roughness (line) contact freeISO 25178-2 277 Roughness (surface) contact free

ISO 4287|ISO 4288 278 Roughness (profile method)PV 3975 279 Abrasion resistance by the Martindale method

ISO 9352 280 Abrasion by abrasive wheels (Taber)

ISO 845 370 Cellular plastics - Apparent densityISO 1798 371 Cellular plastics - Tensile strength and elongation at breakISO 1856 372 Cellular plastics - Compression set

ISO 3386-1|DBL 5452 373 Cellular plastics - Compression stress value CV40

DBL 5307|FMVSS 302 374 Cellular plastics - burning rate DBL 5307|FMVSS 302 375 Leather - burning rate

Origin of photo material:Aykut Erdogdu/Shutterstock.com©iStock.com/Urs Siedentopy

Surface testing:(participation fee: € 280.00 for each method)

Foams/Leather:(participation fee: € 280.00 for each method)

Date




Participation fee report by post report by emailplease mark with a cross

each test method 330 € 280 €at least 4 standard methods 291 € 250 €at least 8 standard methods 262 € 220 €

Environmental Simulation: 455 € 405 €



Schedule 2017

Date


Geosynthetics (geomembrane):(participation fee: € 280.00 for each method)

ISO 14125 330 Flexural propertiesISO 14126 331 Compressive propertiesISO 14129 332 45° tension test methodISO 14130 333 Apparent interlaminar shear strength

ISO 527-1/-4 334 Tensile test (isotropy, anisotropy)ISO 527-1/-5 335 Tensile test (unidirectional)

DBL 5416|ISO 20576-1 501 Multiple stone impact test DBL 5416|ISO 16925-B 502 Steam jet test

DBL 7381.30 503 Aluminum corrosion (Filiform and CASS)

ISO 527-1/-3 300 Tensile test geosyntheticsASTM D6693 301 Tensile Properties of PE/PP GeomembranesASTM D1004 302 Tear Resistance (Graves Tear)

ISO 12236 303 Static puncture Test (CBR-Test)ASTM D4833 304 Index Puncture Resistance

DIN EN 14576 305 Stress Crack ResistanceASTM D5397 306 Stress Crack ResistanceISO 9863-1 307 Thickness at specified pressures (20 kPa)

ASTM D5199 308 Measuring the Nominal ThicknessASTM D5994 309 Measuring Core Thickness

EN 1107-2 310 Dimensional stabilityISO 11358 311 Carbon black content (TGA)

ASTM D4218 312 Carbon black content (muffle-furnace)ASTM D5596 313 Dispersion of Carbon BlackASTM D7466 314 Asperity Height

Origin of photo material:©iStock.com/SimplyCreativePhotography©iStock.com/DaveAlan

Fibre-reinforced plastic composites:(participation fee: € 780.00 for each method)

Plastic paint/aluminum wheels:(participation fee: € 780.00 for each method)



Registration by e-mail: [email protected] we confirm obligatorily the participation in theabove mentioned test(s).




Fibre-reinforced plastic composites

840 € 780 €

Plastic paint/aluminium wheels

840 € 780 €



Schedule 2017

ISO 2781 340 Density of rubberISO 37 341 Tensile test (specimen S2)ISO 37 342 Tensile test (specimen S3A)

ISO 815 343 Compression setISO 815-2 360 Compression set at lower temperatureISO 2285 344 Tension set

ISO 11357-2 345 Glass transition of rubberISO 34-1 346 Tear strength - Trouser test pieceISO 34-1 347 Tear strength - Angle test piece (with nick)ISO 34-1 358 Tear strength - Angle test piece (without nick)

ISO 868|ISO 7619-1 348 Hardness Shore AISO 48-M 349 IRHD-Hardness (method M)ISO 48-N 350 IRHD-Hardness (method N)ISO 1407 351 Solvent extract of rubber

ISO 4662|DIN 53512 352 Rebound resilienceISO 4649 353 Abrasion resistance

ISO 289-1 354 Mooney viscosityISO 1817 355 Increase in mass (liquid B)

ASTM D412 356 Tensile testASTM D2240 357 Hardness Shore A

ISO 11358 359 Thermogravimetry (TGA) - black carbon content

Origin of photo material:©iStock.com/LarisaBozhikova

Rubber and TPE:(participation fee: € 280.00 for each method)

Date


Kunststoff-Institutfür die mittelständische Wirtschaft NRW GmbH

www.kunststoff-institut.de | [email protected]

Karolinenstraße 8 | 58507 Lüdenscheid Tel.: +49 (0) 23 51.10 64-191 | Fax: +49 (0) 23 51.10 64-190







plastics - kimw | kunststoffinstitut lüdenscheid · 150 tensile test (modulus) ... iso 1798 371...

Documents