plastec catalogue april 2014
DESCRIPTION
Catalogue of innovative plumbing products from manufacturer, Plastec Australia Pty Ltd. Products can be purchased through major plumbing distributors throughout Australia.TRANSCRIPT
PRODUCT CATALOGUEAPRIL 2014
VERSION 3.0
PH. 07 5413 4444WWW.PLASTEC.COM.AU
We are a proudly Australian owned and operated manufacturing company, providing innova ve solu ons for the plumbing industry.
With our head office based on the Sunshine Coast, Queensland and a warehouse in Melbourne Victoria we are able to design, manufacture and dispatch to all over Australia, plus interna onal markets.
Since producing our very first clip in 1992, we have grown to be one of Australia’s largest manufacturers of plumbing fi ngs, with now over 1,000 products in our ever expanding range.
Our products are available for purchase through leading plumbing distributors.
Ph. 07 5413 4444Fax: 07 5491 8918
www.plastec.com.auwww.facebook.com/PlastecAustralia
contents
a...PIPE CLIPS & BRACKETSPIPE CLIPS...A.1QUICK CLIPS (CLOSED)...A1QUICK CLICKS (OPEN)...A3STUD CLIPS...A.5QUICK ANCHORS...A.6QUICK SADDLES...A.6
BRACKETS...A.7PIPE SUPPORTS...A.7WALL BRACKETS...A.8HANGING BRACKETS...A.9
b...DRAIN WASTE VENT (DWV)FITTINGS...B.1BENDS...B.1COUPLINGS & CONNECTORS...B.5JUNCTIONS...B.7RISERS...B.8GULLYS & ACCESSORIES...B.9END CAPS...B.11INSPECTION OPENING PIPE...B.12SLAB REPAIR COUPLINGS...B.13REDUCERS...B.14BOLTED TRAP SCREWS...B.15VENTS & ACCESSORIES...B.16CAP & LININGS...B.17EARTHENWARE...B.18FROG MOUTHS...B.19FROG FLAPS...B.20PVC ROCKETS...B.20
REFLUX VALVES...B.21
EXPANSION & SWIVEL JOINTS...B.23EXPANSION JOINTS...B.23SWIVEL JOINTS...B.24COMBINATION JOINTS...B.24RRJ SLIP COUPLINGS...B.25
PAN CONNECTORS...B.270MM OFFSET...B.2720MM OFFSET...B.2840MM OFFSET...B.2960MM OFFSET...B30ADJUSTABLE BENDS...B.31ROTO CONNECTORS...B.32FLUSH PIPES...B.34PAN ACCESSORIES...B.35
SURROUNDS, GRATES & FINISHING COLLARS...B.37SURROUNDS...B.37FINISHING COLLARS & GRATES...B.39
c...HIGH DENSITY POLYETHYLENE (HDPE)
PAN CONNECTORS & ADJUSTABLE BENDS...C.1PAN CONNECTORS...C.1ADJUSTABLE BENDS...C.3
SWIVEL & EXPANSION JOINTS...C.5
BOLTED TRAP SCREWS & REDUCERS...C.7BOLTED TRAP SCREWS...C.7REDUCERS...C.8
MAXI WASTE SWIVEL SYSTEMS & VINYL FLOOR WASTES...C.9MAXI WASTE SWIVEL SYSTEMS...C.9VINYL FLOOR WASTES...C.9
d...STORMWATER
FITTINGS...D.1BENDS...D.1REPAIR COUPLINGS...D.2JUNCTIONS...D.3END CAPS...D.4REDUCERS...D.5FINISHING COLLARS & GRATES...D.6STORMWATER GRATES...D.7FROG FLAPS...D.8DOWNPIPE ADAPTORS/DROPS...D.8DOWNPIPE FITTINGS- RECTANGLE...D.9FLOOR FLANGES...D.10
STORMFLEX...D.11BENDS...D.11COUPLINGS...D.11JUNCTIONS...D.13END CAPS...D.13DOWNPIPE ADAPTORS...D.14
RAINWATER...D.15LEAF GUARD...D.15LEAF CATCHERS...D.16FIRST FLUSH DIVERTERS...D.17TANK OUTLETS...D.17
e...WASTE CONNECTORS
FLEXIBLE CONNECTORS...E.1FLEXIDINGERS...E.1OVERFLOW ASSEMBLY...E.3
HUMDINGER KITS...E.5ADJUSTABLE WASTE CONNECTORS...E.7BATH WASTE CONNECTORS...E.7SHOWER WASTE CONNECTORS...E.8
f...PLUGS & WASTES
PLUGS...F.1CLASSIC...F.1DELUX...F.1
PROTECT...F.3SHORT TAIL...F.3LONG TAIL...F.4PLASTIC...F.5SHOWER & SINK WASTES...F.7SHOWER WASTES...F.7SINK WASTES...F.7
g...FLOOR WASTE GRATES
PLASTIC...G.1STANDARD...G.1SOLVENT WELD...G.2SOCKET & SPIGOT...G.3PLAS-FIN...G.4RUBBER RING JOINT...G.5
CHROME BRASS...G.7ROUND...G.7SQUARE...G.7
VINYL FLOOR WASTESSOLID BRASS...G.9FLEXI FIN...G.10SOLVENT WELD...G.10
h...LEAK CONTROL SYSTEMSPUDDLE FLANGES...H.1PUDDLE FLANGES & ADAPTORS...H.1LEAK CONTROL ADAPTORS...H.2SAFE TRAY FLANGES...H.2
ULTIMATE FLOOR WASTE SYSTEMS...H.3SOLVENT WELD OUTLET...H.3RRJ ADJUSTABLE OUTLET...H.4
MAXI ADAPTOR SYSTEMS...H.5SOLVENT WELD OUTLET...H.5RRJ ADJUSTABLE OUTLET...H.6ROUND COPPER WASTE...H.7SQUARE FLANGE...H.7KIT ONLY...H.8
SWIVEL SYSTEMS...H.9SOLVENT WELD OUTLETS...H.9RRJ ADJUSTABLE OUTLETS...H.10FLEXI FIN...H.11THREADED...H.11
TWIST TOP SYSTEMS...H.13RECESSED - SOLVENT WELD...H.13RECESSED - RRJ ADJUSTABLE...H.14SURFACE MOUNTED - SOLVENT WELD...H.16SURFACE MOUNTED - RRJ ADJUSTABLE...H.17THREADED FLANGE SYSTEM...H.18TWIST TOP ACCESSORIES...H.19KITS ONLY...H.20
i...FLOOR FLANGES & VALVESFLOOR FLANGES...I.1TRITEC VALVES...I.2TEST PLUGS...I.2
j...TRAPS & ACCESSORIES
TRAPS...J.140MM...J.140MM TELESCOPIC...J.350MM...J.450MM TELESCOPIC...J.6DOUBLE BOWL SINK CONNECTORS...J.6LAUNDRY BY-PASS KITS...J.6EXTENSIONS...J.7TRAP KITS...J.9TRAP ACCESSORIES...J.9COVER PLATES...J.10
MICRO TRAPS...J.11
k...SPARE PARTSWASTES...K.1GRATES...K.1PAN COLLAR RUBBERS...K.2BOLTED TRAP LIDS...K.2ECOVENT REPLACEMENT CANISTER...K.3FLEXI PIPE...K.3PLEX-PAN INLET SEALS...K.3BATH WASTE CONNECTOR SPATES KIT...K.4VINYL FLOOR WASTE GRATES...K.4TOILET RUBBERS...K.5FLUSH PIPE/REDUCER...K.5
BOTTLE TRAPS...J.13
Plastec Australia Pty Ltd – Terms & Conditions of Trade
© Copyright – EC Credit Control Pty Ltd - 2006
1. Definitions 1.1 “Supplier” shall mean Plastec Australia Pty Ltd its successors and
assigns or any person acting on behalf of and with the authority of Plastec Australia Pty Ltd.
1.2 “Client” shall mean the Client or any person acting on behalf of and with the authority of the Client.
1.3 “Guarantor” means that person (or persons), or entity, who agrees to be liable for the debts of the Client on a principal debtor basis.
1.4 “Products” shall mean Products supplied by the Supplier to the Client (and where the context so permits shall include any supply of Services as hereinafter defined) and are as described on the invoices, quotation, work authorisation or any other forms as provided by the Supplier to the Client
1.5 “Services” shall mean all services supplied by the Supplier to the Client and includes any advice or recommendations (and where the context so permits shall include any supply of Products as defined above).
1.6 “Price” shall mean the cost of the Products as agreed between the Supplier and the Client subject to clause 4 of this contract.
2. Acceptance 2.1 Any instructions received by the Supplier from the Client for the supply of
Products and/or the Client’s acceptance of Products supplied by the Supplier shall constitute acceptance of the terms and conditions contained herein.
2.2 Where more than one Client has entered into this agreement, the Clients shall be jointly and severally liable for all payments of the Price.
2.3 Upon acceptance of these terms and conditions by the Client the terms and conditions are irrevocable and can only be amended with the written consent of the Supplier.
2.4 The Client undertakes to give the Supplier at least fourteen (14) days notice of any change in the Client’s name, address and/or any other change in the Client’s details.
3. Orders 3.1 The Client acknowledges that drawings and images in the Supplier’s
Price list are indicative only and are subject to change without notice and to availability of supply.
3.2 Products will be supplied to Clients on receipt of a written order quoting an order number, details and quantities of the Products required, and the Supplier’s code for the Products.
3.3 Minimum order amounts and freight are outline in the Supplier’s Price list.
4. Price And Payment 4.1 At the Supplier’s sole discretion the Price shall be either;
(a) as indicated on invoices provided by the Supplier to the Client in respect of Products supplied; or
(b) the Supplier’s current Price as at the date of delivery of the Products, according to the Supplier’s current Price list; or
(c) the Supplier’s quoted Price (subject to clause 4.2) which shall be binding upon the Supplier provided that the Client shall accept the Supplier’s quotation in writing within thirty (30) days.
4.2 The Supplier reserves the right to change the Price in the event of a variation to the Supplier’s quotation.
4.3 At the Supplier’s sole discretion a deposit may be required. 4.4 Time for payment for the Products shall be of the essence and will be
stated on the invoice or any other forms. If no time is stated then payment shall be due seven (7) days following the date of the invoice.
4.5 At the Supplier’s sole discretion; (a) payment shall be due on delivery of the Products, or (b) payment shall be due before delivery of the Products, or (c) payment for approved Clients shall be made by instalments in
accordance with the Supplier’s payment schedule, or (d) payment for approved Client’s shall be due thirty (30) days following
the end of the month in which a statement is posted to the Client’s address or address for notices.
4.6 Payment will be made by cash, or by cheque, or by bank cheque, or by direct credit, or by any other method as agreed to between the Client and the Supplier.
4.7 GST and other taxes and duties that may be applicable shall be added to the Price except when they are expressly included in the Price.
5. Delivery Of Products 5.1 At the Supplier’s sole discretion delivery of the Products shall take place
when;(a) the Client takes possession of the Products at the Client’s address (in
the event that the Products are delivered by the Supplier or the Supplier’s nominated carrier); or
(b) the Client’s nominated carrier takes possession of the Products in which event the carrier shall be deemed to be the Client’s agent.
5.2 At the Supplier’s sole discretion the costs of delivery are; (a) included in the Price, or (b) in addition to the Price, or (c) for the Client’s account.
5.3 The Client shall make all arrangements necessary to take delivery of the Products whenever they are tendered for delivery. In the event that the Client is unable to take delivery of the Products as arranged then the Supplier shall be entitled to charge a reasonable fee for redelivery.
5.4 Delivery of the Products to a third party nominated by the Client is deemed to be delivery to the Client for the purposes of this agreement.
5.5 The Supplier may deliver the Products by separate instalments. Each separate instalment shall be invoiced and paid for in accordance with the provisions in these terms and conditions.
5.6 The Client shall take delivery of the Products tendered notwithstanding that the quantity so delivered shall be either greater or lesser than the quantity purchased provided that; (a) such discrepancy in quantity shall not exceed 5%, and (b) the Price shall be adjusted pro rata to the discrepancy.
5.7 The failure of the Supplier to deliver shall not entitle either party to treat this contract as repudiated.
5.8 The Supplier shall not be liable for any loss or damage whatever due to failure by the Supplier to deliver the Products (or any of them) promptly or at all.
6. Risk 6.1 If the Supplier retains ownership of the Products nonetheless, all risk for
the Products passes to the Client on delivery. 6.2 If any of the Products are damaged or destroyed following delivery but
prior to ownership passing to the Client, the Supplier is entitled to receive all insurance proceeds payable for the Products. The production of these terms and conditions by the Supplier is sufficient evidence of the Supplier’s rights to receive the insurance proceeds without the need for any person dealing with the Supplier to make further enquiries.
7. Title 7.1 It is the intention of the Supplier and agreed by the Client that ownership
of the Products shall not pass until: (a) the Client has paid all amounts owing for the particular Products, and (b) the Client has met all other obligations due by the Client to the
Supplier in respect of all contracts between the Supplier and the Client.
7.2 Receipt by the Supplier of any form of payment other than cash shall not be deemed to be payment until that form of payment has been honoured, cleared or recognised and until then the Supplier’s ownership or rights in respect of the Products shall continue.
7.3 It is further agreed that: (a) where practicable the Products shall be kept separate and identifiable
until the Supplier shall have received payment and all other obligations of the Client are met; and
(b) until such time as ownership of the Products shall pass from the Supplier to the Client the Supplier may give notice in writing to the Client to return the Products or any of them to the Supplier. Upon
such notice the rights of the Client to obtain ownership or any other interest in the Products shall cease; and
(c) the Supplier shall have the right of stopping the Products in transit whether or not delivery has been made; and
(d) if the Client fails to return the Products to the Supplier then the Supplier or the Supplier’s agent may enter upon and into land and premises owned, occupied or used by the Client, or any premises as the invitee of the Client, where the Products are situated and take possession of the Products; and
(e) the Client is only a bailee of the Products and until such time as the Supplier has received payment in full for the Products then the Client shall hold any proceeds from the sale or disposal of the Products on trust for the Supplier; and
(f) the Client shall not deal with the money of the Supplier in any way which may be adverse to the Supplier; and
(g) the Client shall not charge the Products in any way nor grant nor otherwise give any interest in the Products while they remain the property of the Supplier; and
(h) the Supplier can issue proceedings to recover the Price of the Products sold notwithstanding that ownership of the Products may not have passed to the Client; and
(i) until such time that ownership in the Products passes to the Client, if the Products are converted into other products, the parties agree that the Supplier will be the owner of the end products.
8. Client’s Disclaimer8.1 The Client hereby disclaims any right to rescind, or cancel the contract or
to sue for damages or to claim restitution arising out of any misrepresentation made to the Client by the Supplier and the Client acknowledges that the Products are bought relying solely upon the Client’s skill and judgement.
9. Defects 9.1 The Client shall inspect the Products on delivery and shall within seven
(7) days notify the Supplier of any alleged defect, shortage in quantity, damage or failure to comply with the description or quote. The Client shall afford the Supplier an opportunity to inspect the Products within a reasonable time following delivery if the Client believes the Products are defective in any way. If the Client shall fail to comply with these provisions the Products shall be presumed to be free from any defect or damage. For defective Products, which the Supplier has agreed in writing that the Client is entitled to reject, the Supplier’s liability is limited to either (at the Supplier’s discretion) replacing the Products or passing a credit for the Price of the Products.
10. Returns 10.1 Returns will only be accepted provided that:
(a) the Client has complied with the provisions of clause 9.1; and (b) the Supplier has agreed in writing to accept the return of the
Products; and (c) the Products are returned at the Client’s cost within three (3) days of
the delivery date; and (d) the Supplier will not be liable for Products which have not been stored
or used in a proper manner; and (e) the Products are returned in the condition in which they were
delivered and with all packaging material, brochures and instruction material in as new condition as is reasonably possible in the circumstances.
10.2 The Supplier may (in its discretion) accept the return of Products for credit but this may incur a handling fee of 15% of the value of the returned Products plus any freight.
11. Warranty11.1 Subject to the conditions of warranty set out in Clause 11.2 the Supplier
warrants that if any defect in any Products becomes apparent and is reported to the Supplier within twelve (12) months of the date of delivery (time being of the essence) then the Supplier will either (at the Supplier’s sole discretion) replace the Products or pass a credit for the Price of the Products.
11.2 The conditions applicable to the warranty given by Clause 11.1 are: (a) The warranty shall not cover any defect or damage which may be
caused or partly caused by or arise through: (i) Failure on the part of the Client to properly maintain any Products;
or (ii) Failure on the part of the Client to follow any instructions or
guidelines provided by the Supplier; or (iii) Any use of any Products otherwise than for any application
specified on a quote or order form; or (iv) The continued use of any Products after any defect becomes
apparent or would have become apparent to a reasonably prudent operator or user; or
(v) Fair wear and tear, any accident or act of God. (b) The warranty shall cease and the Supplier shall thereafter in no
circumstances be liable under the terms of the warranty if the Products are repaired, altered or overhauled without the Supplier’s consent.
(c) In respect of all claims the Supplier shall not be liable to compensate the Client for any delay in either replacing or repairing the Products or in properly assessing the Client’s claim.
11.3 For Products not manufactured by the Supplier, the warranty shall be the current warranty provided by the manufacturer of the Products. The Supplier shall not be bound by nor be responsible for any term, condition, representation or warranty other than that which is given by the manufacturer of the Products.
12. The Commonwealth Trade Practices Act 1974 and Fair Trading Acts 12.1 Nothing in this agreement is intended to have the effect of contracting
out of any applicable provisions of the Commonwealth Trade Practices Act 1974 or the Fair Trading Acts in each of the States and Territories of Australia, except to the extent permitted by those Acts where applicable.
13. Intellectual Property 13.1 Where the Supplier has designed, drawn or written Products for the
Client, then the copyright in those designs and drawings and documents shall remain vested in the Supplier, and shall only be used by the Client at the Supplier’s discretion.
13.2 The Client warrants that all designs or instructions to the Supplier will not cause the Supplier to infringe any patent, registered design or trademark in the execution of the Client’s order and the Client agrees to indemnify the Supplier against any action taken by a third party against the Supplier in respect of any such infringement.
14. Default & Consequences Of Default 14.1 Interest on overdue invoices shall accrue from the date when payment
becomes due daily until the date of payment at a rate of 2.5% per calendar month and such interest shall compound monthly at such a rate after as well as before any judgement.
14.2 If the Client defaults in payment of any invoice when due, the Client shall indemnify the Supplier from and against all costs and disbursements incurred by the Supplier in pursuing the debt including legal costs on a solicitor and own client basis and the Supplier’s collection agency costs.
14.3 Without prejudice to any other remedies the Supplier may have, if at any time the Client is in breach of any obligation (including those relating to payment, or exceeding any approved credit limit) the Supplier may suspend or terminate the supply of Products to the Client and any of its other obligations under the terms and conditions. The Supplier will not be liable to the Client for any loss or damage the Client suffers because the Supplier exercised its rights under this clause.
14.4 If any account remains overdue after thirty (30) days then an amount of the greater of $20.00 or 10.00% of the amount overdue (up to a maximum of $200) shall be levied for administration fees which sum shall become immediately due and payable.
14.5 Without prejudice to the Supplier’s other remedies at law the Supplier shall be entitled to cancel all or any part of any order of the Client which remains unperformed and all amounts owing to the Supplier shall, whether or not due for payment, become immediately payable in the event that: (a) any money payable to the Supplier becomes overdue, or in the
Supplier’s opinion the Client will be unable to meet its payments as they fall due; or
(b) the Client becomes insolvent, convenes a meeting with its creditors or proposes or enters into an arrangement with creditors, or makes an assignment for the benefit of its creditors; or
(c) a receiver, manager, liquidator (provisional or otherwise) or similar person is appointed in respect of the Client or any asset of the Client.
15. Security And Charge 15.1 Despite anything to the contrary contained herein or any other rights
which the Supplier may have howsoever: (a) where the Client and/or the Guarantor (if any) is the owner of land,
realty or any other asset capable of being charged, both the Client and/or the Guarantor agree to mortgage and/or charge all of their joint and/or several interest in the said land, realty or any other asset to the Supplier or the Supplier’s nominee to secure all amounts and other monetary obligations payable under the terms and conditions. The Client and/or the Guarantor acknowledge and agree that the Supplier (or the Supplier’s nominee) shall be entitled to lodge where appropriate a caveat, which caveat shall be released once all payments and other monetary obligations payable hereunder have been met.
(b) should the Supplier elect to proceed in any manner in accordance with this clause and/or its sub-clauses, the Client and/or Guarantor shall indemnify the Supplier from and against all the Supplier’s costs and disbursements including legal costs on a solicitor and own client basis.
(c) the Client and/or the Guarantor (if any) agree to irrevocably nominate constitute and appoint the Supplier or the Supplier’s nominee as the Client’s and/or Guarantor’s true and lawful attorney to perform all necessary acts to give effect to the provisions of this clause 15.1.
16. Cancellation 16.1 The Supplier may cancel these terms and conditions or cancel delivery
of Products at any time before the Products are delivered by giving written notice. On giving such notice the Supplier shall repay to the Client any sums paid in respect of the Price. The Supplier shall not be liable for any loss or damage whatever arising from such cancellation.
16.2 In the event that the Client cancels delivery of Products the Client shall be liable for any loss incurred by the Supplier (including, but not limited to, any loss of profits) up to the time of cancellation.
17. Privacy Act 1988 17.1 The Client and/or the Guarantor/s agree for the Supplier to obtain from a
credit reporting agency a credit report containing personal credit information about the Client and Guarantor/s in relation to credit provided by the Supplier.
17.2 The Client and/or the Guarantor/s agree that the Supplier may exchange information about the Client and the Guarantor/s with those credit providers either named as trade referees by the Client or named in a consumer credit report issued by a credit reporting agency for the following purposes: (a) to assess an application by Client; and/or (b) to notify other credit providers of a default by the Client; and/or (c) to exchange information with other credit providers as to the status of
this credit account, where the Client is in default with other credit providers; and/or
(d) to assess the credit worthiness of Client and/or Guarantor/s. 17.3 The Client consents to the Supplier being given a consumer credit report
to collect overdue payment on commercial credit (Section 18K(1)(h) Privacy Act 1988).
17.4 The Client agrees that personal credit information provided may be used and retained by the Supplier for the following purposes and for other purposes as shall be agreed between the Client and Supplier or required by law from time to time: (a) provision of Products; and/or (b) marketing of Products by the Supplier, its agents or distributors in
relation to the Products; and/or (c) analysing, verifying and/or checking the Client’s credit, payment
and/or status in relation to provision of Products; and/or (d) processing of any payment instructions, direct debit facilities and/or
credit facilities requested by Client; and/or (e) enabling the daily operation of Client’s account and/or the collection
of amounts outstanding in the Client’s account in relation to the Products.
17.5 The Supplier may give information about the Client to a credit reporting agency for the following purposes: (a) to obtain a consumer credit report about the Client; and/or (b) allow the credit reporting agency to create or maintain a credit
information file containing information about the Client.
18. Unpaid Supplier’s Rights 18.1 Where the Client has left any item with Supplier for repair, modification,
exchange or for the Supplier to perform any other Service in relation to the item and Supplier has not received or been tendered the whole of the Price, or the payment has been dishonoured, the Supplier shall have: (a) a lien on the item; (b) the right to retain the item for the Price while the Supplier is in
possession of the item; (c) a right to sell the item,
18.2 The lien of the Supplier shall continue despite the commencement of proceedings, or judgement for the Price having been obtained.
19. General 19.1 If any provision of these terms and conditions shall be invalid, void,
illegal or unenforceable the validity, existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired.
19.2 These terms and conditions and any contract to which they apply shall be governed by the laws of Queensland and are subject to the jurisdiction of the courts of Queensland.
19.3 The Supplier shall be under no liability whatever to the Client for any indirect loss and/or expense (including loss of profit) suffered by the Client arising out of a breach by the Supplier of these terms and conditions.
19.4 In the event of any breach of this contract by the Supplier the remedies of the Client shall be limited to damages. Under no circumstances shall the liability of the Supplier exceed the Price of the Products.
19.5 The Client shall not be entitled to set off against or deduct from the Price any sums owed or claimed to be owed to the Client by the Supplier.
19.6 The Supplier may license or sub-contract all or any part of its rights and obligations without the Client’s consent.
19.7 The Supplier reserves the right to review these terms and conditions at any time. If, following any such review, there is to be any change to these terms and conditions, then that change will take effect from the date on which the Supplier notifies the Client of such change.
19.8 Neither party shall be liable for any default due to any act of God, war, terrorism, strike, lock-out, industrial action, fire, flood, drought, storm or other event beyond the reasonable control of either party.
19.9 The failure by the Supplier to enforce any provision of these terms and conditions shall not be treated as a waiver of that provision, nor shall it affect the Supplier’s right to subsequently enforce that provision.
aPIPE CLIPS & BRACKETS
PIPE CLIPS...A.1CLIPS (CLOSED)...A1CLICKS (OPEN)...A3
STUD CLIPS...A.5PIPE ANCHORS...A.6
PIPE SADDLES...A.6
BRACKETS...A.7PIPE SUPPORTS...A.7
WALL BRACKETS...A.8HANGING BRACKETS...A.9
A.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM A.1
PIPE CLIPSPIPE CLIP & BRACKET
QUICK CLIPS (CLOSED)
POLYBUTYLENE GREY
NOTES• 16mm to suit 16-18 polybutylene pipe• Keeps pipework off the substrate• UV stabilised• Fold fl ap back under pipe and secure
ID
11030 16 MASONRY NAIL 100 1400
11031 22 MASONRY NAIL 100 1000
ID
11032 16 METAL SCREW 100 1400
11033 22 METAL SCREW 100 1000
13630 16 WOOD SCREW 100 1400
14853 22 WOOD SCREW 100 1000
ID
11034 16 TWIST NAIL 100 1400
11035 22 TWIST NAIL 100 1000
PEX BLACK
NOTES• Suits most black pex pipe on the Australian market• UV stabilised• Keeps pipework off the substrate• Fold fl ap back under pipe and secure
ID
11046 16 TWIST NAIL 100 1400
11047 20 TWIST NAIL 100 1000
11067 25 TWIST NAIL 100 800
ID
11040 16 MASONRY NAIL 100 1400
11041 20 MASONRY NAIL 100 1000
11061 25 MASONRY NAIL 100 800
ID
11043 16 METAL SCREW 100 1400
11044 20 METAL SCREW 100 1000
11064 25 METAL SCREW 100 800
14877 16 WOOD SCREW 100 1400
14878 20 WOOD SCREW 100 1000
15650 25 WOOD SCREW 100 1000
www.plastec.com.auA.2
COPPER BROWN
NOTES• Keeps pipework off the substrate• UV stabilised• Fold fl ap back under pipe and secure
NOTES• Keeps pipework off the substrate• UV stabilised• Fold fl ap back under pipe and secure
ID
11021 1/2” MASONRY NAIL 100 1400
11022 3/4” MASONRY NAIL 100 1000
ID
11001 1/2” MASONRY NAIL 100 1800
11002 5/8” MASONRY NAIL 100 1400
11003 3/4” MASONRY NAIL 100 1200
15362 1” MASONRY NAIL 100 800
ID
11009 1/2” TWIST NAIL 100 1800
11010 5/8” TWIST NAIL 100 1400
11011 3/4” TWIST NAIL 100 1200
15493 1” TWIST NAIL 100 800
ID
11023 1/2” METAL SCREW 100 1400
11024 3/4” METAL SCREW 100 1000
14850 1/2” WOOD SCREW 100 1400
16428 3/4” WOOD SCREW 100 1000
ID
11005 1/2” METAL SCREW 100 1800
11006 5/8” METAL SCREW 100 1400
11007 3/4” METAL SCREW 100 1200
15365 1” METAL SCREW 100 800
13635 1/2” WOOD SCREW 100 2000
13636 3/4” WOOD SCREW 100 1200
15531 1” WOOD SCREW 100 1000
LAGGED COPPER GREEN
ID
11025 1/2” TWIST NAIL 100 1400
11026 3/4” TWIST NAIL 100 1000
inches
inches
inches
inches
inches
A.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM A.3
PEX BLACK
NOTES• Suits most black pex pipe on the Australian market• Keeps pipework off the substrate• UV stabilised
ID
11100 16 MASONRY NAIL 100 2400
11101 20 MASONRY NAIL 100 1800
11102 25 MASONRY NAIL 100 1200
ID
11108 16 TWIST NAIL 100 2400
11109 20 TWIST NAIL 100 1800
11110 25 TWIST NAIL 100 1200
GAS YELLOW
NOTES• 40mm gas click has two fi xing points for addi onal support• Suits most gas pex pipe on the Australian market• Keeps pipework off the substrate• UV stabilised
ID
15041 16 MASONRY NAIL 100 2400
15042 20 MASONRY NAIL 100 1800
15043 25 MASONRY NAIL 100 1200
15044 32 MASONRY NAIL 25 750
ID
15834 16 TWIST NAIL 100 2400
15835 20 TWIST NAIL 100 1800
15836 25 TWIST NAIL 100 1200
15849 32 TWIST NAIL 25 750
15850 40 TWIST NAIL 25 400
ID
15047 16 METAL SCREW 100 3000
15048 20 METAL SCREW 100 1800
15049 25 METAL SCREW 100 1000
15050 32 METAL SCREW 25 750
15603 40 METAL SCREW 25 400
QUICK CLICKS (OPEN)
ID
11104 16 METAL SCREW 100 2800
11105 20 METAL SCREW 100 1800
11106 25 METAL SCREW 100 1200
16681 32 METAL SCREW 25 750
www.plastec.com.auA.4
COPPER BROWN
ID
15629 3/8” MASONRY NAIL 100 5000
11080 1/2” MASONRY NAIL 100 1200
11081 3/4” MASONRY NAIL 100 1400
11082 1” MASONRY NAIL
100 1400
ID
15630 3/8” METAL SCREW 100 5000
11083 1/2” METAL SCREW 100 1200
11084 3/4” METAL SCREW 100 1400
11085 1” METAL SCREW 100 1200
ID
15631 3/8” TWIST NAIL 100 4000
11086 1/2” TWIST NAIL 100 1200
11087 3/4” TWIST NAIL 100 1400
11088 1” TWIST NAIL 100 1400
POLYBUTYLENE GREY
NOTES• 16mm to suit 16-18 polybutylene pipe• Keeps pipework off the substrate• UV stabilised
ID
11092 16 METAL SCREW 100 2800
11093 22 METAL SCREW 100 1600
ID
15990 1/2” WOOD SCREW 100 1200
17715 3/4” WOOD SCREW 100 1200
ID
11090 16 MASONRY NAIL 100 2400
11091 22 MASONRY NAIL 100 1600
15808 28 MASONRY NAIL 100 1000
ID
11094 16 TWIST NAIL 100 2400
11095 22 TWIST NAIL 100 1600
NOTES• Diameter is in inches• Keeps pipework off the substrate• UV stabilised
INSULATION/SOLAR GREY
ID
17222 40 MASONRY NAIL 25 500
17223 40 TWIST NAIL 25 500
17224 40 METAL SCREW 25 400
NOTES• Suitable for solar hot water• Fits over solar insula on• Must be used over 40mm insula on, do not place directly onto pipe
inches
inches
inches
inches
A.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM A.5
COPPER BROWN
PEX BLACK
ID
11213 1/2” METAL SCREW 100 1800
11214 3/4” METAL SCREW 100 1200
15062 1” METAL SCREW 100 800
ID
11216 1/2” TWIST NAIL 100 1800
11217 3/4” TWIST NAIL 100 1200
15063 1” TWIST NAIL 100 800
NOTES• Ideal for steel or mber framework • Separates pipework from the substrate• Permits expansion and contrac on• UV stabilised
NOTES• Ideal for steel or mber framework • Separates pipework from the substrate• Permits expansion and contrac on• UV stabilised
ID
11223 16 METAL SCREW 100 1400
11224 20 METAL SCREW 100 1200
18161 25 METAL SCREW 100 800
ID
11226 16 TWIST NAIL 100 1500
11227 20 TWIST NAIL 100 1000
ID
11210 1/2” MASONRY NAIL 100 1800
11211 3/4” MASONRY NAIL 100 1200
13743 1” MASONRY NAIL 100 800
ID
11220 16 MASONRY NAIL 100 1500
11221 20 MASONRY NAIL 100 1000
STUD CLIPS
inches
inches
inches
www.plastec.com.auA.6
COPPER BROWN
NOTES• No fi xings supplied• Unlike regular saddles, “quick” saddles keeps pipework off the substrate
PEX BLACK
NOTES• No fi xings supplied• 11180 also suitable for 1/2” lagged copper• Unlike copper saddles, “quick” saddles keep pipework off the substrate• 11182 also suitable for 3/4” lagged copper
ID
11170 1/2” 100 1200
11172 3/4” 100 2000
11173 1” 100 1200
ID
11180 16 100 1200
11181 20 100 2000
11182 25 100 1200
COPPER BROWN
NOTES• Suits 6mm masonry drill bit• UV stabilised• Keeps pipework off the substrate
POLYBUTYLENE GREY
PEX BLACK
NOTES• UV stabilised• 16mm to suit 16-18 polybotylene pipe• Keeps pipework off the substrate• Suits 6mm masonry drill bit
NOTES• Suits 6mm masonry drill bit• UV stabilised• Keeps pipework off the substrate
ID
11160 16 MASONRY NAIL 100 2000
11161 20 MASONRY NAIL 100 1400
ID
11150 1/2” MASONRY NAIL 100 2000
11151 3/4” MASONRY NAIL 100 1500
ID
11155 16 MASONRY NAIL 100 2000
11156 22 MASONRY NAIL 100 1200
QUICK SADDLES
QUICK ANCHORS
inches
inches
A.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM A.7
BRACKETSPIPE CLIPS & BRACKETS
NOTES• UV stabilised• Eliminates kinking
ELBOW SUPPORT BRACKET PEX PIPE BLACK
PULL THROUGH BRACKET
NOTES• No fi xings supplied• Ideal for running pex, polybute, fl exible hose or cabling through framework or under fl oor joists• Suits pipework from 10mm through to 25mm• Sold as single unit
ID
13680 10-25 150
PULL THROUGH ANGLE BRACKET
STUD GROMMET
NOTES• No fi xings supplied• Ideal for running pex, polybute, fl exible hose or cabling through framework, fl oor joists or under suspended concrete ceilings• Sold as single unit
ID
13681 10-25 100
NOTES• Requires 32mm hole in framework
ID
15733 10-25 100 1200
ID
11230 16 10 200
11231 20 10 130
PIPE SUPPORTS
www.plastec.com.auA.8
ON WALL BRACKET
NOTES• No fi xings supplied• UV stabilised• Corrosion resistant• Brilliant white fi nish• Paintable
OFF WALL BRACKET
NOTES• No fi xings supplied• Keeps pipework off the substrate• UV stabilised• Corrosion resistant• Brilliant white fi nish• Paintable
SIDE WALL BRACKET
ON WALL DOWN PIPE BRACKET SQUARE
OFF WALL DOWN PIPE BRACKET SQUARE
NOTES• No fi xings supplied• UV stabilised• Corrosion resistant• Paintable
NOTES• No fi xings supplied• UV stabilised• Paintable
NOTES• No fi xings supplied• Keeps pipework off the substrate• UV stabilised• Paintable
ID
11291 40 100
11292 50 100
11294 100 25
ID
16277 100 x 50 140
16278 100 x 65 140
ID
16279 100 x 50 200
16280 100 x 65 200
ID
11285 40 25 300
11286 50 25 250
14851 65 20 200
14852 80 20 200
11287 90 10 270
11288 100 10 180
ID
11295 40 25 250
11296 50 25 250
14843 65 20 200
14844 80 20 200
11297 90 10 250
11298 100 10 180
WALL BRACKETS
A.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM A.9
HANGING BRACKET
NOTES• Maximum loading 20kg• Corrosion resistant bracket• Strap adjustable to accommodate 40mm to 100mm DWV pipe• Bracket can be cut to size• Non corrosive
ID
11265 25-100 450 BLACK 10 120
15714 25-100 450 WHITE 10 120
HANGING BRACKETS
www.plastec.com.auA.10
DRAIN WASTE VENT (DWV)
bFITTINGS...B.1
BENDS...B.1COUPLINGS & CONNECTORS...B.5
JUNCTIONS...B.7RISERS...B.8
GULLYS & ACCESSORIES...B.9END CAPS...B.11
INSPECTION OPENING PIPE...B.12SLAB REPAIR COUPLINGS...B.13
REDUCERS...B.14BOLTED TRAP SCREWS...B.15VENTS & ACCESSORIES...B.16
CAP & LININGS...B.17EARTHENWARE...B.18FROG MOUTHS...B.19
FROG FLAPS...B.20PVC ROCKETS...B.20
REFLUX VALVES...B.21
EXPANSION & SWIVEL JOINTS...B.23EXPANSION JOINTS...B.23
SWIVEL JOINTS...B.24COMBINATION JOINTS...B.24
RRJ SLIP COUPLINGS...B.25
PAN CONNECTORS...B.270MM OFFSET...B.27
20MM OFFSET...B.2840MM OFFSET...B.2960MM OFFSET...B.30
ADJUSTABLE BENDS...B.31ROTO CONNECTORS...B.32
FLUSH PIPES...B.34PAN ACCESSORIES...B.35
SURROUNDS, GRATES & FINISHING COLLARS...B.37
SURROUNDS...B.37FINISHING COLLARS & GRATES...B.39
B.1B.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
FITTINGSDRAIN-WASTE-VENT (DWV)
BENDS
SOCKET TO SOCKET 5 DEGREES
ID INLET OUTLET
17892 100 SOCKET 100 SOCKET 36
SOCKET TO SOCKET 15 DEGREES
ID INLET OUTLET
17893 100 SOCKET 100 SOCKET 36
SOCKET TO SOCKET 30 DEGREES
ID INLET OUTLET
17894 100 SOCKET 100 SOCKET 36
SOCKET TO SOCKET 45 DEGREES
ID INLET OUTLET
17884 40 SOCKET 40 SOCKET 20 140
17886 50 SOCKET 50 SOCKET 10 70
17888 65 SOCKET 65 SOCKET 45
17890 80 SOCKET 80 SOCKET 60
17895 100 SOCKET 100 SOCKET 28
www.plastec.com.auB.2
SOCKET TO SOCKET 88 DEGREES
ID INLET OUTLET
17885 40 SOCKET 40 SOCKET 20 100
17887 50 SOCKET 50 SOCKET 10 50
17889 65 SOCKET 65 SOCKET 35
17891 80 SOCKET 80 SOCKET 40
17896 100 SOCKET 100 SOCKET 18
SOCKET TO PIPE SIZE 45 DEGREES
ID INLET OUTLET
16377 40 SOCKET 40 PIPE SIZE 15 150
17897 50 SOCKET 40 PIPE SIZE 130
16378 50 SOCKET 50 PIPE SIZE 15 165
17898 65 SOCKET 65 PIPE SIZE 48
SOCKET TO SPIGOT 88 DEGREES
ID INLET OUTLET
12950 40 SOCKET 40 SPIGOT 20 140
12951 50 SOCKET 50 SPIGOT 10 70
14705 65 SOCKET 65 SPIGOT 56
15882 80 SOCKET 80 SPIGOT 50
15571 100 SOCKET 100 SPIGOT 24
NOTES• Spigot end of the elbow glues into pipe
NOTES• Outlet of elbow glues into socket fi ng
SOCKET TO PIPE SIZE 88 DEGREES
ID INLET OUTLET
12960 40 SOCKET 40 PIPE SIZE 20 140
12961 50 SOCKET 50 PIPE SIZE 10 70
15628 65 SOCKET 65 PIPE SIZE 80
NOTES• Outlet of elbow glues into socket fi ng
SOCKET TO SOCKET INSPECTION OPENING 88 DEGREES
ID INLET OUTLET
17899 50 SOCKET 50 SOCKET 55
17900 65 SOCKET 65 SOCKET 30
B.3B.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
LONG RADIUS BEND
ID DEGREE FITTING
17230 100 88 F/F 17
LONG RADIUS BEND
ID OUTLET FITTING
17408 100 45 F/F 20
ID
12494 80 x 50 100
17273 100 X 50 40
12495 100 x 50 55
NOTES• These elbows can be used to connect all leak control fl anges to reduce to 50mm DWV pipe (inlet pipe size and outlet spigot)
12494
12495 17273
PUDDLE FLANGE PIPE SIZE INLET
RELATED PRODUCTS• 17273 extended to suit Micro Floor Waste Trap products pg H.6 - 17071 & 17271
www.plastec.com.auB.4
MALE IRON ADAPTOR
NOTES• Ideal for connec ng traps and cap and linings to socket fi ngs
MALE IRON CONNECTOR
NOTES• Ideal for connec ng traps and cap and linings to DWV pipework
FEMALE IRON ADAPTOR
NOTES• Ideal for connec ng waste fi ngs to socket fi ngs
ID OUTLET
15008 40 SPIGOT 20 320
15009 50 SPIGOT 20 160
ID OUTLET
15010 40 SOCKET 20 320
15011 50 SOCKET 20 160
ID OUTLET
15005 40 SPIGOT 20 280
15006 50 SPIGOT 20 160
PUDDLE FLANGE SOCKET INLET
NOTES• These elbows are ideal for connec on to fl oor wastes under suspended concrete fl oors (inlet socket and outlet spigot)
ID
12496 80 x 50 80
12497 100 x 50 48
12496
12497
B.5B.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
COUPLINGS & CONNECTORS
THREADED COUPLING
ID
16708 100 42
17246 150 12
STRAIGHT COUPLING SOCKET
ID
17926 40 20 200
17927 50 10 70
17928 65 68
FEMALE IRON CONNECTOR
NOTES• Ideal for connec ng waste fi ngs to DWV pipework
ID OUTLET
15007 40 SOCKET 20 260
15014 50 SOCKET 20 140
PUSH TEC CHROME
ID INLET OUTLET
17437 40 SOCKET 40 SOCKET 200
17635 50 SOCKET 50 SOCKET 100
SLIP COUPLING
NOTES• Great for repairs• Ideal for exposed work and downpipes• No internal stop
ID
15873 100 45
RELATED PRODUCTS• Stormwater versions available pg D.2 - 15752.
www.plastec.com.auB.6
MALE IRON ADAPTOR
NOTES• Connects to the inside of DWV socket fi ngs by solvent welding.• Provides a male thread to connect traps or cap and linings
MALE IRON CONNECTOR
NOTES• Connects to DWV pipework by solvent welding.• Provides a male thread to connect traps or cap and linings
ID OUTLET
14984 40 SPIGOT 20 200
14985 50 SPIGOT 20 260
ID OUTLET
14986 40 SOCKET 20 200
14987 50 SOCKET 20 100
FEMALE IRON CONNECTOR
NOTES• Connects to DWV pipework by solvent welding and providing a female thread to connect to waste fi ngs or corresponding male threads.
ID OUTLET
14978 40 SOCKET 20 160
14979 50 SOCKET 20 120
FEMALE IRON ADAPTOR
NOTES• Connects to the inside of DWV socket fi ngs by solvent welding and provides a female thread to connect to waste fi ngs or corresponding male threads
ID OUTLET
14976 40 SPIGOT 20 180
14977 50 SPIGOT 20 240
REPAIR COUPLING
NOTES• Unique hinge design assists repair work in confi ned spaces• Only need to clamp one side
ID
15117 100 36
17225 150 18
B.7B.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
JUNCTIONS
SOCKET TO SOCKET 45 DEGREES
ID OUTLET
17903 40 SOCKET 70
17905 50 SOCKET 38
17907 65 SOCKET 36
17911 100 SOCKET 10
SOCKET TO SOCKET 88 DEGREES
ID OUTLET
17904 40 SOCKET 80
17906 50 SOCKET 38
17908 65 SOCKET 40
17912 100 SOCKET 13
REDUCING 100MM 45 DEGREES
ID OUTLET
17909 50 SOCKET 18
17910 65 SOCKET 15
DOUBLE JUNCTION FF X 45 DEGREES
DOUBLE JUNCTION FF X 88 DEGREES
ID DEGREE
16775 100 45 11
ID DEGREE
16774 100 88 12
www.plastec.com.auB.8
RISERS
BOSS
ID INLET OUTLET
16559 50 100 71
NOTES• Drill 72mm hole• 2 straps supplied to secure to pipe
RELATED PRODUCTS• Stormwater Boss available pg D.3 - 15610 & 15025, sold separately
FOUR WAY
ID OUTLET
17116 80 50x40x40x40 24
17118 100 50x50x40x40 16
17232 80 50x40x50x40 24
17233 100 50x50x50x40 16
17116
171181723217233
FOUR WAY EXTENDED 40/50MM
NOTES• Extended length ideal for running pipe work above the trap crown• Dual to accommodate both 40 & 50mm pipe, elimina ng the need for reducers
ID INLET
17117 80 50x40x40x40 30
17119 100 50x50x40x40 10
17117
17119
B.9B.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
GULLYS & ACCESSORIES
DISCONNECTOR TRAP
NOTES• Standard gully trap• Compact design
ID OUTLET
17102 100 SOCKET 8
ID OUTLET
17107 100 SOCKET 10
SWEEP GULLY WITH SWEEP BEND
NOTES• Sweeping design allows for easier drain cleaner access
FLOOR WASTE PALAZZI TRAP
NOTES• Standard fl oor waste gully
ID OUTLET
17134 100x65 SOCKET 18
17133 100x50 SOCKET 18
17132 80x65 SOCKET 24
17131 80x50 SOCKET 28
� � �
� � �
� � �
ID OUTLET
17099 100 SOCKET 9
P TRAP
NOTES• Large trap can be used as a bound-ary trap
476
287
www.plastec.com.auB.10
SOLVENT WELD
ID
12517 40 DWV 40
12518 50 DWV 20
NOTES• Negates the need for access panels for in wall and cavity installa ons• 40mm ideal for air condi oner overfl ows (condensa on trap)• Solvent weld - no rubber joints
SOLVENT WELD TRAP FLOOR WASTE
ID
14712 80 x 50 DWV 48
14711 100 X 50 DWV 36
14712
14711
SOLVENT WELD ADAPTOR TUN DISH
ID
14702 80 x 50 DWV 168
14703 100 X 50 DWV TBA
B.11B.11DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
END CAPS
HEAVY DUTY SOLVENT WELD
NOTES• Can be used for air/water tes ng
ID
14980 100 180
14981 150 12
14982 225 17
15781 300 8
ID
15605 40 20 380
15606 50 30 210
15607 65 20 160
15608 80 160
LIGHT DUTY SOLVENT WELD
NOTES• Can be solvent welded
ID
15027 40 20 480
15028 50 370
15029 65 115
15030 80 170
ID
15026 100 195
15033 150 20
RELATED PRODUCTS• Stormwater version available pg D.4 - 15031.
NOTES• Sealing washer supplied with 100mm and 150mm caps
ID
15001 100 10 120
15002 150 36
SCREW CAP
www.plastec.com.auB.12
IN PIPE CAP SOLVENT WELD ID PIPE
NOTES• No exposed edge for OH&S• Caps push internally into DWV pipe• Outer lip provided for easy removal• Solvent weld easily• Ideal for use in concrete slabs
ID
14989 40 200
14990 50 120
14998 65 220
14999 80 160
14997 100 90
IN PIPE PLUG SOLVENT WELD
NOTES• Facilitates the placement of termite barriers without removal
ID
15963 40 40 600
15964 50 20 360
15962 100 15 72
100MM
ID FITTING OUTLET
17914 100 FF SOCKET TO SOCKET 13
17915 100 MF PIPE TO SOCKET 13
INSPECTION OPENING PIPE
B.13B.13DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SLAB REPAIR COUPLING
STANDARD
ID INLET OUTLET
12925 40 SOCKET 40 SPIGOT 15 240
12926 50 SOCKET 50 SPIGOT 10 250
15950 80 SOCKET 80 SPIGOT 90
15755 90 SOCKET 90 SPIGOT 60
15956 100 SOCKET 100 SPIGOT 75
17428 150 SOCKET 150 SPIGOT 30
15957 150 PIPE SIZE 150 SPIGOT 12
EXTENDED
ID INLET OUTLET
12930 100 PIPE SIZE 100 SPIGOT 48
NOTES• Solvent weld• Used to connect or extend pipework at fl oor level by connec ng to the inside of the pipework
NOTES• Solvent weld
FLANGED SOCKET TO SPIGOT
ID INLET OUTLET
12935 40 SOCKET 40 SPIGOT 64
12936 50 SOCKET 50 SPIGOT 90
12937 65 SOCKET 65 SPIGOT 110
12938 80 SOCKET 80 SPIGOT 65
12939 100 SOCKET 100 SPIGOT 45
FLANGED PIPE SIZE TO SPIGOT
ID INLET OUTLET
12940 50 PIPE SIZE 50 SPIGOT 96
12941 80 PIPE SIZE 80 SPIGOT 90
12942 100 PIPE SIZE 100 SPIGOT 55
NOTES• Flange provides support
NOTES• Flange provides support
www.plastec.com.auB.14
REDUCERS
PIPE
ID
16351 65 x 40 170
16352 65 x 50 170
14564 100 x 40 108
14894 100 x 50 108
17499 50 x 40 350
17500 100 x 65 105
SOCKET
ID TYPE
16787 50 x 40 SOCKET 290
16788 65 x 50 SOCKET 152
16789 65 x 40 SOCKET 160
17496 80 x 50 SOCKET 84
16785 100 x 50 SOCKET 112
16783 100 x 65 SOCKET 105
17497 100 x 80 SOCKET 112
LEVEL INVERT TAPER L.I.T
NOTES• Pipe fi ts into plain end of pipe• Socket fi ts into socket end of pipe or fi ng
NOTES
• Reduces to appropriate size
ID
17916 50 x 40 20 180
17917 65 x 40 125
17918 65 x 50 125
17919 80 x 40 65
17920 80 x 50 65
17921 100 x 50 60
17922 100 x 65 60
17923 100 x 80 72
17924 150 x 100 18
B.15B.15DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
BOLTED TRAP SCREWS
NOTES• 6 screw fi xing system• Socket goes over DWV pipe• Spigot goes inside DWV pipe
ID OUTLET
11676 100 PLASTIC SOCKET 66
15012 150 PLASTIC SOCKET 26
ID OUTLET
11680 100 PLASTIC SPIGOT 66
16257 150 PLASTIC SPIGOT 16
BOLTED CAP PLASTIC LID
RELATED PRODUCTS• Caps can be purchased separately pg L.2 - 11704 & 15207
BOLTED CAP BRASS LID
NOTES• 3 screw fi xing system• Socket goes over DWV pipe• Spigot goes inside DWV pipe
ID OUTLET
11686 100 BRASS SOCKET 25
11696 100 BRASS SPIGOT 25
15013 150 BRASS SOCKET 6
16258 150 BRASS SPIGOT 6
ID OUTLET
11687 100 CHROME BRASS SOCKET 25
11697 100 CHROME BRASS SPIGOT 25
FLEXI FIN BOLTED CAP PLASTIC LIDNOTES• No solvent welding required• Remove fi n for solvent welding into 90mm pipe• Will push into earthenware pipe• Quick and easy installa on• 6 screw fi xing system
ID SUIT
15292 100/90 PLASTIC DWV 52
RELATED PRODUCTS• HDPE version available pg C.7 - 15295• Caps can be purchased separately pg N.2 - 11704
RELATED PRODUCTS• Caps can be purchased separately pg L.2 - 11705, 15208 & 11708
www.plastec.com.auB.16
NOTES• No solvent welding required• Remove fi n for solvent welding into 90mm pipe• Quick and easy installa on• 3 screw fi xing system
FLEXI FIN BOLTED CAP BRASS LID
ID SUIT
15290 100/90 BRASS DWV 24
ID SUIT
15291 100/90 CHROME DWV 24
RELATED PRODUCTS• HDPE versions available pg C.7 - 15293 & 15294• Caps can be purchased separately pg L.2 - 11705 & 11708
VENTS & ACCESSORIES
NOTES• Standard vent cowl
STANDARD
ID SUIT TYPE
14992 50 DWV OPEN 20 300
14991 100 DWV OPEN 20 140
MOZZIE PROOF
ID SUIT TYPE
14994 50 DWV MOZZIE P 20 200
14993 100 DWV MOZZIE P 20 140
ID SUIT TYPE
16384 50 DWV MESH 50 300
16383 100 DWV MESH 20 100
NOTES• Prevents entry of mosquitoes
COVERED
ID SUIT TYPE
12970 50 DWV COVERED 86
12971 100 DWV COVERED 35
NOTES• Stainless steel mesh - water resistant and mozzie resistant• Prevents the entry of rainwater in the drainage system• Ember resistant
B.17B.17DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
WEATHERING APRON
NOTES• Used to prevent the entry of rainwater at the point of roof penetra on of a vent pipe
ID SUIT
15550 50 DWV 20 100
15549 100 DWV 46
ECO VENT
NOTES• Reduces methane, hydrogen sulphide and carbon dioxide• Prevents the escape of fungi spores that can enter rainwater tanks connected to roofs• Prevents bacteria from releasing through the vents and entering rainwater tanks• Prevents mosquito and vector breeding• Ideal for all domes c and commercial premises• Will suit either 50mm or 100mm DWV pipe
ID SUIT
15280 50 TO 100 DWV 10
RELATED PRODUCTS• Replacement Carbon Canister can be purchased separately pg N.3 - 15073
CAP & LINING
STRAIGHT
NOTES• Solvent weld into pipe• Brass nut eliminates cross threading
ID INLET OUTLET
11960 40 BSP 40 SPIGOT PLASTIC 10 50
11961 50 BSP 50 SPIGOT PLASTIC 5 30
ID INLET OUTLET
11970 40 BSP 40 SPIGOT BRASS 80
11971 50 BSP 50 SPIGOT BRASS 50
NUT NUT
www.plastec.com.auB.18
50 X 40MM REDUCER
NOTES• Solvent weld into pipe• Brass nut eliminates cross threading
BEND
LOW BEND
NOTES• Loose nut connec on• Solvent weld into pipe• Overall height of elbow is 88mm
NOTES• Loose nut connec on reduces standard elbow height• Overall height of 40mm elbow is 67mm• Overall height of 50mm elbow is 80mm
ID INLET OUTLET
11962 50 BSP 40 SPIGOT PLASTIC 10 150
11972 50 BSP 40 SPIGOT BRASS 50
ID INLET OUTLET
15472 40 BSP 40 SPIGOT PLASTIC 10 160
ID INLET OUTLET
11963 40 BSP 40 SPIGOT PLASTIC 10 140
11964 50 BSP 50 SPIGOT PLASTIC 10 150
EARTHENWARE
100MM BUSH
NOTES• Earthenware rubber ring not supplied• When used in conjunc on with the rubber o-ring this fi ng permits a PVC-U pipe to be connected to an earthenware socket
ID SUIT
14913 100 DWV to EW SOCKET 30
NUT
NUT
NUT
B.19B.19DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
RUBBER O RING
NOTES• Suits earthenware bush and spigot fi t- ngs shown below
ID SUIT
15154 100 SPIGOT OR SOCKET 150
100MM DWV ADAPTOR
NOTES• Fits into spigot of earthenware pipe• No fuss in pipe repair coupling• No rubber ring required
ID INLET OUTLET
14946 100 100 PIPE 100 SPIGOT 60
100MM SPIGOT
NOTES• Earthenware rubber ring not supplied• When used in conjunc on with the rubber o-ring this fi ng will connect an earthenware pipe to 100mm PVC-U pipe
ID SUIT
14876 100 DWV to EW SPIGOT 30
FROG MOUTH / VAC HEAD
NOTES• Supplied with cap ID OUTLET DEGREE
16669 100 SPIGOT STR 19
16670 100 SPIGOT 45 15
FROG MOUTHS
www.plastec.com.auB.20
NOTES• Prohibits vermin from entering system
SIDE HINGE
ID
14972 50 140
FROG FLAPS
ID
15254 100 60
17528 150 16
TOP HINGE
STAINLESS STEEL COVER
NOTES• Stainless steel mesh• Mozzie-resistant
ID
16374 100 60
PVC ROCKET
ID
15695 40 75
15696 50 75
15284 65 75
15285 100 42
NOTES• Install prior to pouring suspended slab
PVC ROCKETS
RELATED PRODUCTS• Stormwater version available pg D.8 - 15255
B.21B.21DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
REFLUX VALVE
NOTES• Easy access to replacement of non-return assy• Adjustable riser height• Stops rodents entering through pipes
ID
16662 100 8
17090 150 1
BOLTED CAP PLASTIC LID WITH REFLUX BELOW
ID OUTLET
17097 150 SOCKET 26
REFLUX VALVESDRAIN-WASTE-VENT (DWV)
www.plastec.com.auB.22
B.23B.23DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
EXPANSION & SWIVEL JOINTS
DRAIN-WASTE-VENT (DWV)
150
100
EXPANSION JOINT EXTENDED
NOTES• Ideal for pipe repair work• Water ght seal• Use in conjunc on with the swivel joint for reac ve soils
ID INLET OUTLET
15131 90 PIPE SIZE SOCKET 11
15130 100 PIPE SIZE SOCKET 12
15642 150 PIPE SIZE SOCKET 6
RELATED PRODUCTS• HDPE version available pg C.5 - 17123
15130
15642
90
15131
EXPANSION ASSEMBLY 100MM LONG F+F
NOTES• Total expansion is 45mm• Closed overall height is 185mm• Solvent weld both ends• Lubrica on may be required
ID INLET OUTLET
15128 100 SOCKET SOCKET 30
EXPANSION JOINTS
www.plastec.com.auB.24
100MM
ID INLET OUTLET SUIT
16370 100 PIPE SIZE PIPE SIZE DWV 8
16365 100 PIPE SIZE SOCKET DWV 8
17941 100 SOCKET SOCKET DWV 8
17942 100 SOCKET PIPE SIZE DWV 8
NOTES• Allows for 40 degrees inclusive swivel movement• Allows for 52mm expansion. • Compact fi ng
16370
16365
SWIVEL JOINT
ID INLET OUTLET
15132 100 SOCKET SOCKET 12
15199 100 SOCKET PIPE SIZE 12
15643 150 SOCKET SOCKET 6
NOTES• Independently air tested in excess of 200kps• Does not require use of toxic root inhibitor tape• Compact in size• Can rotate 20 degrees from its axis
15132
15199
15643
O 240
O 179
O 179
SWIVEL JOINTS
COMBINATION JOINTS
B.25B.25DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
17378
17414
ID INLET OUTLET SUIT
17378 50 SOCKET SOCKET DWV 14
17414 65 SOCKET SOCKET DWV 9
RELATED PRODUCTS• HDPE version available pg C.5 - 16875
NOTES• Allows for 40 degrees inclusive swivel movement• Allows for 80mm expansion. • Compact fi ng
RRJ SLIP COUPLINGS
EXPANSION COUPLING 100MM
NOTES•Solvent weld one end and rubber ring joint at other end to allow for expansion• Lubrica on may be required
ID
15129 100 36
ID
15302 100 12
SLIP REPAIR COUPLING 100MM
NOTES• Both ends have rubber ring seals and the centre stop has been removed• Lubrica on may be required
50/65MM
www.plastec.com.auB.26
B.27B.27DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
0MM OFFSET
FLEXI FIN
NOTES• Adjustable height• No need to solvent weld push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
SHORT SPIGOT SOLVENT WELD
NOTES• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
LONG SPIGOT SOLVENT WELD
NOTES• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
11405 100 44
ID
14926 100 68
ID
11624 100 48
RELATED PRODUCTS• HDPE version available pg C.1 - 14752
LONG SPIGOT SOLVENT WELD 80MM
NOTES• Solvent weld into 80mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
14831 80 40
PAN CONNECTORSDRAIN-WASTE-VENT (DWV)
NOTES: Plastec does not recommend the installa on of the following Pan Connectors to P Trap installa ons and such use will void warranty.
5555
115115
146146
www.plastec.com.auB.28
20MM OFFSET
LOW RISE FLEXI FIN
NOTES• Adjustable height• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
RELATED PRODUCTS• HDPE version available pg C.1 - 14753
NOTES• Adjustable height• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
RELATED PRODUCTS• HDPE version available pg C.1 - 14755
LOW RISE SHORT SPIGOT SOLVENT WELD
NOTES• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
LOW RISE LONG SPIGOT SOLVENT WELD
NOTES• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
HIGH RISE FLEXI FIN
ID
11620 100 48
ID
14927 100 68
ID
14749 100 28
ID
11406 100 41
NOTES: Plastec does not recommend the installa on of the following Off set Pan Connectors to P Trap installa ons and such use will void warranty.
B.29B.29DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
HIGH RISE SOLVENT WELD
NOTES• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
14767 100 30
LOW RISE FLEXI FIN
NOTES• Adjustable height• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
11407 100 38
40MM OFFSET
RELATED PRODUCTS• HDPE version available pg C.2 - 14754
MEDIUM RISE FLEXI FIN
NOTES• Medium rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
15641 100 40
RELATED PRODUCTS• HDPE version available pg C.2 - 15644
HIGH RISE FLEXI FIN
NOTES• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
14750 100 33
RELATED PRODUCTS• HDPE version available pg C.2 - 14756
NOTES: Plastec does not recommend the installa on of the following Off set Pan Connectors to P Trap installa ons and such use will void warranty.
www.plastec.com.auB.30
60MM OFFSET
40MM OFFSET SEAL SOLVENT WELD
NOTES• Remove ring and rotate pan seal to achieve 0-40mm off set• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
HIGH RISE FLEXI FIN
NOTES• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
HIGH RISE SOLVENT WELD
NOTES• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
LOW RISE SOLVENT WELD
NOTES• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID
14751 100 28
ID
11621 100 24
ID
14768 100 28
ID
13646 100 28
RELATED PRODUCTS• HDPE version available pg C.2 - 14757
RELATED PRODUCTS• Replacement pan seal can be purchased separately pg L.3 - 14493
NOTES: Plastec does not recommend the installa on of the following Off set Pan Connectors to P Trap installa ons and such use will void warranty.
B.31B.31DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ADJUSTABLE BENDS
PAN BEND STANDARD
NOTES• Length can be adjusted by cu ng at groove
ID
11510 100 12
RELATED PRODUCTS• HDPE version available pg C.3 - 14760
PAN BEND STANDARD WITH BRACKET
NOTES• Bracket used to stabilise pan bend against wall• Length can be adjusted by cu ng at groove
ID
11512 100 12
RELATED PRODUCTS• HDPE version available pg C.3 - 14758
HIGH RISE SOLVENT WELD
NOTES•High rise reduces the risk of siphonage and may need to be recessed into the fl oor• Solvent weld into 100mm DWV pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
Q BEND
NOTES• Transi onal bend used to convert P trap pan to S trap pan• Adjustable height• Not recommended for skew installa ons
ID
14761 100 20
RELATED PRODUCTS• HDPE version available pg C.3 - 14766
ID
14769 100 28
www.plastec.com.auB.32
PAN BEND EXTENDED WITH BRACKET
NOTES• Converts P trap to S trap installa on• Horizontal inlet can be reduced in length by cu ng at each step• Height adjustable to 250mm
UNIVERSAL BEND WITH BRACKET
NOTES• Ideal for wall faced P trap pan installa ons with a required set out in excess of 180mm• Bracket & body may be cut to required length• Horizontal inlet can be reduced in length - each step is 20mm
ID
11511 100 10
ID
14787 100 8
RELATED PRODUCTS• HDPE version available pg C.4 - 14759
RELATED PRODUCTS• HDPE version available pg C.4 - 14788
ROTO CONNECTORS
Q BEND WITH BRACKET
NOTES• Bracket used to stabilise pan bend against wall• Bracket & body may be cut to required length• Not recommended for skew installa ons
ID
14762 100 12
RELATED PRODUCTS• HDPE version available pg C.4 - 14764
0 130MM ADJUSTABLE SOLID LID
NOTES• Reduces risk of siphonage• Designed to be pro-ac vely installed dur-ing construc on• The body can be cast into concrete.• Solvent weld• 65mm access from outlet pipe
ID OUTLET
17456 100 SPIGOT 9
B.33B.33DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
0 130MM OFFSET SEMI RECESSED
ID OUTLET
15017 100 SPIGOT 9
NOTES• Reduces risk of siphonage• Designed to be installed during construc on• The body can be cast into concrete• Rotatable discs ensures maximum fl exibility for setout• Easy connec on of Pan Connector to rotatable disk• No drilling required, rotate disk to required setout and solvent weld• Protec ve cover cap supplied• Refer to installa on instruc ons supplied with product for further details
ROTO SHOWER CONNECTOR 0 130MM OFFSET
ID OUTLET
14710 100 SPIGOT 8
NOTES• Refer to installa on instruc ons provided with product for further details
ROTO SHOWER REDUCER 50MM
NOTES • Protec ve cover cap supplied
ID
15757 100 X 50 35
RELATED PRODUCTS• Inlet designed to suit 50mm Cap and Lining pg B.17 - 11961
ROTO PAN EXTENDED
NOTES• Extension kit increases the height of the outlet connec on• Outlet connec on is 100mm DWV pipe size suitable for a Pan Connector• Ideal for installa on with a deep le bed• Rotatable• Refer to installa on instruc ons provided with product for further details
ID OUTLET
16379 100 SPIGOT 6
www.plastec.com.auB.34
SHORT
ID
14836 50 POLYPROPYLENE 50
LONG
NOTES• Extension piece pushes into pipe• Suitable for disabled toilet installa on
ID
14842 50 POLYPROPYLENE 20
MEDIUM
ID
14837 50 POLYPROPYLENE 20
FLUSH PIPES
NOTES• Sold as one piece
RELATED PRODUCTS• Extension also available for separate purchase pg C.3 - 14758
B.35B.35DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
PAN ACCESSORIES
PAN SCREW
ID
11626 8 x 65 S/STEEL 100 1500
ID
11627 8 x 65 BRASS 100 1500
PAN ANCHOR KIT
NOTES• Sold as complete kit in bags of four, which contains four screws, four raw plugs and four caps.
ID
11630 8 WHITE S/STEEL 4 200
ID
11631 8 A/IVORY S/STEEL 4 200
ID
11632 8 WHITE BRASS 4 200
ID
11633 8 A/IVORY BRASS 4 200
www.plastec.com.auB.36
B.37B.37DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SURROUNDS
DOMED GRATE
NOTES• Ideal overfl ow relief gully mound• Loose fi t grate for simple access• Solvent welds onto standard 100mm DWV*• Pressed stainless steel protec ve shroud
ID GRATE
11647 100 STAINLESS* DOMED 28
ID GRATE
11646 100 PLAIN DOMED 28
FLAT GRATE
NOTES• Ideal overfl ow relief gully mound• Loose fi t grate for simple access • Solvent welds onto standard 100mm DWV*• Pressed stainless steel protec ve shroud
ID GRATE
11649 100 STAINLESS* FLAT 28
ID GRATE
11648 100 PLAIN FLAT 30
RELATED PRODUCTS• Grates also sold separately pg B.41 - 11670 & 11671
SURROUNDS, GRATES & FINISHING COLLARS
DRAIN-WASTE-VENT (DWV)
www.plastec.com.auB.38
OPEN GRATE LID
NOTES• Grate can easily be removed for maintenance• Ideal overfl ow relief gully mound• Clipping system allows grate to li under pressure• Grate easily removable for access if required• Suits standard 100mm DWV*• Pressed stainless steel protec ve shroud
ID GRATE
11651 100 STAINLESS* DOMED 24
ID GRATE
11650 100 PLAIN DOMED 24
CONCEALED GRATE
NOTES• Concealable grate prevents rain water and foreign materials from entering into the drain• Concealable grate easily li s under pressure to accommodate surge relief• Ideal overfl ow relief gully mound• Suits standard 100mm DWV*• Pressed stainless steel protec ve shroud
ID
11656 100 PLAIN 24
ID
11657 100 STAINLESS* 24
BOLTED TRAP
NOTES• Ideal bolted trap surround• Screw fi xed concealed lid• Lid can be removed for easy access to drainage line • Solvent welds onto standard 100mm DWV*• Pressed stainless steel protec ve shroud
ID
11706 100 PLAIN 28
ID
11707 100 STAINLESS* 28
B.39B.39DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
FINISHING COLLARS & GRATES
NOTES• Socket goes over pipe, spigot inside pipe.
KIT DOMED GRATE
ID OUTLET
11660 100 SOCKET 42
ID OUTLET
11661 100 SPIGOT 40
NOTES• Socket goes over pipe, spigot inside pipe.
KIT FLAT GRATE
ID OUTLET
11662 100 SOCKET 48
17430 150 SOCKET 12
ID OUTLET
11663 100 SPIGOT 50
SQUARE KIT FLAT GRATE
NOTES• Ideal for paved areas• Socket goes over pipe, spigot inside pipe
ID OUTLET FLANGE DIA
15622 100 SOCKET 163 SQUARE 40
RELATED PRODUCTS• Stormwater version available pg D.7 - 15635
www.plastec.com.auB.40
SQUARE FLEXI FIN KIT DOMED GRATE
NOTES• Ideal for paved areas• Push in - no gluing required
ID SUIT FLANGE DIA
15632 100 DWV 163 SQUARE 30
SQUARE FLEXI FIN KIT FLAT GRATE
NOTES• Ideal for paved areas• Push in - no gluing required
ID SUIT FLANGE DIA
15633 100 DWV 163 SQUARE 30
ROUND BODY
NOTES• Socket goes over pipe, spigot inside pipe• No grate supplied
ID OUTLET
11666 100 SOCKET 60
RELATED PRODUCTS• Stormwater version available pg D.6 - 15034
ID OUTLET
11667 100 SPIGOT 50
11667
11666
SQUARE KIT DOMED GRATE
NOTES• Ideal for paved areas• Socket goes over pipe, spigot inside pipe
ID OUTLET FLANGE DIA
15621 100 SOCKET 163 SQUARE 32
RELATED PRODUCTS• Stormwater version available pg D.7 - 15634.
B.41B.41DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SQUARE BODY
NOTES• Ideal for an outdoor paving applica on• Socket goes over pipe, spigot inside pipe• No grate supplied
ID OUTLET
15702 100 SOCKET 40
RELATED PRODUCTS• Stormwater version available pg D.6 - 15904
DOMED GRATE
NOTES• Domed and fl at grates are interchangeable
ID GRATE
11670 140 DOMED 105
FLAT GRATE
ID GRATE
11671 140 FLAT 208
NOTES• Domed and fl at grates are interchangeable
www.plastec.com.auB.42
cHIGH DENSITY POLYETHYLENE (HDPE)
PAN CONNECTORS & ADJUSTABLE BENDS...C.1• PAN CONNECTORS...C.1
• ADJUSTABLE BENDS...C.3
SWIVEL & EXPANSION JOINTS...C.5
BOLTED TRAP SCREWS & REDUCERS...C.7• BOLTED TRAP SCREWS...C.7
• REDUCERS...C.8
MAXI WASTE SWIVEL SYSTEMS& VNIYL FLOOR WASTES...C.9• MAXI WASTE SWIVEL SYSTEMS...C.9
• VINYL FLOOR WASTES...C.9
C.1C.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
HIGH DENSITY POLYETHYL-ENE (HDPE)
# .................................................................. #- SubHeading ................................................................ #
NOTES• HDPE/copper Flex-Fins are white• Adjustable height• ID 14752 suitable for earthenware pipe• No need to solvent weld push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID SUIT
14752 100 HDPE/Cu 44
PAN CONNECTORS
20MM OFFSET LOW RISE FLEXI FIN
NOTES• HDPE/copper fl exi fi ns are white• Adjustable height• ID 14753 suitable for earthenware pipe• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
NOTES• HDPE/copper fl exi fi ns are white• Adjustable height• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
20MM OFFSET HIGH RISE FLEXI FIN
ID SUIT
14753 100 HDPE/Cu 41
ID SUIT
14755 100 HDPE/Cu 28
0MM OFFSET FLEXI FIN
RELATED PRODUCTS• DWV version available pg B.28 - 11406
RELATED PRODUCTS• DWV version available pg B.28 - 14749
HDPE PAN CONNECTORS & ADJUSTABLE BENDS
HIGH DENSITY POLYETHYLENE (HDPE)
RELATED PRODUCTS• DWV version available pg B.27 - 11405
www.plastec.com.auC.2
60MM OFFSET HIGH RISE FLEXI FINNOTES• HDPE/copper fl exi fi ns are white• High rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID SUIT
14757 100 HDPE/Cu 28
40MM OFFSET MEDIUM RISE FLEXI FIN
ID SUIT
15644 100 HDPE/Cu 40
40MM OFFSET HIGH RISE FLEXI FIN
ID SUIT
14756 100 HDPE/Cu 33
NOTES• HDPE/copper Flex-Fins are white• Flex-Fin allows for height adjustment• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
NOTES• HDPE/copper Flex-Fins are white• Medium rise reduces the risk of siphonage and may need to be recessed into the fl oor• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
40MM OFFSET LOW RISE FLEXI FIN
NOTES• HDPE/copper Flex-Fins are white• Flex-Fin allows for height adjustment• No need to solvent weld, push into pipe• Ensure that the outlet of the WC doesn’t come in contact with the base of the Pan Connector body
ID SUIT
14754 100 HDPE/Cu 38
C.3C.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ADJUSTABLE BENDS
Q BEND
PAN BEND STANDARD
NOTES• Can be used for skew installa ons• Length can be adjusted by cu ng at groove
ID SUIT
14760 100 HDPE/Cu 10
PAN BEND STANDARD WITH BRACKET
NOTES• Bracket used to stabilise pan bend against wall• Length can be adjusted by cu ng at groove
ID SUIT
14758 100 HDPE/Cu 12
ID SUIT
14766 100 HDPE/Cu 12
NOTES• Not recommended for skew installa ons
www.plastec.com.auC.4
PAN BEND EXTENDED WITH BRACKET
NOTES• Converts all P trap to S trap installa on• Horizontal inlet can be reduced in length by cu ng at each step• Outlet 100mm ID spigot, height fully adjustable to 250mm
UNIVERSAL BEND WITH BRACKET
NOTES• Ideal for wall faced P trap pan installa ons with a required set out in excess of 180mm• Horizontal inlet can be reduced in length by cu ng at each step
ID SUIT
14759 100 HDPE/Cu 10
ID SUIT
14788 100 HDPE/Cu 8
Q BEND WITH BRACKET
NOTES• Bracket used to stabilise pan bend against wall• Not recommended for skew installa ons
ID SUIT
14764 100 HDPE/Cu 12
C.5C.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
EXPANSION JOINT EXTENDED
NOTES• Air test to AS3500• Use in conjunc on with the swivel joint for reac ve soils• Pipe connec on via electrofusion coupling or bu weld
ID INLET OUTLET SUIT
17123 110 PIPE SIZE SOCKET HDPE 12
SWIVEL AND EXPANSION COMBINATION JOINT
NOTES• This fi ng combines the swivel joint and expansion feature to reduce the space required for installa on• Air test to AS3500• Pipe connec on via electrofusion coupling or bu weld
ID INLET OUTLET SUIT
16875 110 PIPE SIZE PIPE SIZE HDPE 6
RELATED PRODUCTS• DWV versions available pg B.23 - 15131, 15130 & 15642
RELATED PRODUCTS• DWV versions available pg B.24 - 16370, 16365, 17378 & 17414
SWIVEL & EXPANSION JOINTS
HIGH DENSITY POLYETHYLENE (HDPE)
www.plastec.com.auC.6
C.7C.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
NOTES• No solvent welding required• Remove fi n for solvent welding into 90mm pipe• Will push into earthenware pipe• Quick and easy installa on
ID SUIT
15294 100 CHROME HDPE 24
FLEXI FIN BRASS LID
ID SUIT
15293 100/90 BRASS HDPE 24
BOLTED TRAP SCREWS
FLEXI FIN PLASTIC LID
NOTES• No solvent welding required• Remove fi n for solvent welding into 90mm pipe• Will push into earthenware pipe• Quick and easy installa on
ID SUIT
15295 100/90 PLASTIC HDPE 52
HDPE BOLTED TRAP SCREWS & REDUCERS
HIGH DENSITY POLYETHYLENE (HDPE)
ACTUAL PRODUCT CONTAINS SIX SCREWS
IMAGE NOT AVAILABLE AT TIME OF PRINTING
www.plastec.com.auC.8
HDPE FLEXI FIN MULTIPLE REDUCER
NOTES• Reducer can accommodate 40/50 DWV and 51/56 HDPE
ID
15862 110 x 50 60
HDPE TO DWV REDUCER
NOTES• Inlet is outer diameter pipe and outlet is internal diameter pipe
ID
15932 110 x 40 TBA
REDUCERS
C.9C.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
HDPE MAXI WASTE SWIVEL SYSTEMS & VINYL FLOOR
WASTESHIGH DENSITY POLYETHYLENE (HDPE)
MAXI WASTE SWIVEL SYSTEMS
FLEXI FIN ROUND CHROME BRASS GRATE
RELATED PRODUCTS• DWV versions available pg H.9 - 13649
ID SUIT
13648 80 x 80 CHROME HDPE/Cu 30
15201 100 x 100 CHROME HDPE/CU 20
FLEXI FIN SQUARE CHROME BRASS GRATE
RELATED PRODUCTS• DWV version available pg H.9 - 13662
ID SUIT
13661 80 x 80 CHROME HDPE/CU 30
15202 100 x 100
CHROME HDPE/CU 20
VINYL FLOOR WASTES
COMPLETE BRASS CHROME BRASS GRATE
NOTES• Fits 110mm HDPE pipe• Two-piece vinyl clamp system
ID SUIT
14959 100 x100 CHROME HDPE 12
RELATED PRODUCTS• Vinyl Floor Basket pg G.12 - 15931
GRATE
GRATE
GRATE
www.plastec.com.auC.10
COMPLETE BRASS CHROME BRASS CLEAROUT
NOTES• Solid brass body and cover• Fits 110mm HDPE pipe• Two-piece vinyl clamp system
ID SUIT
15019 100 x100 CHROME HDPE 12
17080 100X100NONSLIP
CHROME HDPE 12
FLEXI FIN CHROME BRASS GRATE
NOTES• Nylon body with solid chrome brass lid• Guaranteed ght seal with fl exi fi n outlet • Easily adjustable• Suits 110mm HDPE and 100mm copper tube• Flex-Fin allows for addi onal adjustment
ID
14812 80 x 80 CHROME 36
14811 100 x100 CHROME 20
FLEX FIN CHROME BRASS CLEAROUT
NOTES• Nylon body with solid brass lid• Guaranteed ght seal with fl exi fi n outlet • Easily adjustable• Suits 110mm HDPE and 100mm copper tube• Flex-Fin allows for addi onal adjustment
ID
15032 80 x 80 CHROME 36
15024 100 x100 CHROME 20
16725 100 x100 CHROME NON SLIP 16
RELATED PRODUCTS• Vinyl Floor Basket pg G.12 - 15931
RELATED PRODUCTS• Vinyl Floor Basket pg G.12 - 15931
RELATED PRODUCTS• Vinyl Floor Basket pg G.12 - 15931
GRATE
GRATE
GRATE
dSTORMWATER
FITTINGS...D.1BENDS...D.1
REPAIR COUPLINGS...D.2JUNCTIONS...D.3
END CAPS...D.4REDUCERS...D.5
FINISHING COLLARS & GRATES...D.6STORMWATER GRATES...D.7
FROG FLAPS...D.8DOWNPIPE ADAPTORS/DROPS...D.8
DOWNPIPE FITTINGS - RECTANGLE...D.9FLOOR FLANGES...D.10
STORMFLEX...D.11BENDS...D.11
COUPLINGS...D.11JUNCTIONS...D.13
END CAPS...D.13DOWNPIPE ADAPTORS...D.14
RAINWATER...D.15LEAF GUARD...D.15
LEAF CATCHERS...D.16FIRST FLUSH DIVERTERS...D.17
TANK OUTLETS...D.17
D.1D.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
FITTINGSSTORMWATER
ID
16563 65 180
14328 90 80
ID
16395 65 140
14327 90 60
16368 100 30
BEND F/F X 15 DEGREES
BEND F/F X 45 DEGREES
BEND X 95 DEGREES
ID OUTLETS DEG
16605 65 FF 95DEG 140
14326 90 FF 95DEG 50
16220 90 MF 95DEG 50
16369 100 FF 95DEG 24
NOTES• Quality white fi nish
NOTES• Quality white fi nish
NOTES• Quality white fi nish
BENDS
www.plastec.com.auD.2
SLIPNOTES• Great for repairs• Ideal for exposed work and downpipes• No internal stop
ID
15752 90 69
REPAIR COUPLINGS
CONNECTOR STRAIGHT
ID
16394 65 110
15662 90 150
16366 100 50
NOTES• Quality white fi nish• Contains internal stop
90MM CONNECTOR
NOTES• Suit 90mm screwed cap or divertor cap
ID
15754 90 80
ID
14551 100 35
DWV STRAIGHT COUPLING WITH INTERNAL STOP
NOTES• Great for repairs• Ideal for exposed work and downpipes• Internal stop prevents coupling sliding along pipe
D.3D.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
JUNCTIONS
TEE
NOTES• Suit 90mm pipe ID THREADING
15508 90 THREADED 30
12268 90 PLAIN 30
BOSS TEE
NOTES• Connects to 100mm Stormwater with 90mm socket outlet• Ideal for quick and secure cut in
ID INLET OUTLET
15610 90 90 62
15025 90 100 72
AVAILABLE TO SUIT EITHER 90MMSTORMWATER PIPE OR 100MM
DWV PIPE
90MM STORMWATER
SOCKET
RELATED PRODUCTS• DWV version available pg B.8 -16559
ID INLET OUTLET
15611 90 90 56
15119 90 100 40
NOTES• Connects to 100mm DWV or Stormwater with 90mm socket outlet• Drill hole, posi on fi ng and connect strap to secure to pipe. Silicone can be used to seal if required
AVAILABLE TO SUIT EITHER 90MMSTORMWATER PIPE OR 100MM
DWV PIPE
90MMSTORMWATER
SOCKET
www.plastec.com.auD.4
END CAPS
LIGHT DUTY SOLVENT WELD
NOTES• All light duty caps can be solvent welded
ID
15031 90 150
RELATED PRODUCTS• DWV versions available pg B.11 - 15027, 15028, 15029 & 15030.
PVC STORMWATER
NOTES• All Stormwater caps can be solvent welded ID
15984 150 12
15985 225 17
15986 300 8
NOTES• Fits over pipe or into fi ng
DUAL CAP/PLUG
ID SUIT
14988 90 OD Pipe x 90 ID Pipe 1 100
ID
15004 90 155
SCREW CAP
D.5D.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
REDUCERS
SOCKET REDUCER
ID
14881 100 x 90 128
PIPE REDUCER
NOTES• Reduces 100mm DWV pipe to suit 90mm outer diameter Stormwater
DOWNPIPE REDUCER
NOTES• Inlet is 90mm socket Stormwater and outlet is either 75mm Stormwater or 80mm DWV
ID
15120 90 x 75 70
15624 90 x 80 85
ID
17260 100 x 90 80
O RING ADAPTERNOTES• Reduces 100mm DWV pipe to suit 90mm outer diameter Stormwater• O-ring allows for pipe expansion
ID
15124 100 x 90 75
NOTES• Inlet 90mm socket and outlet 100mm pipe size
DOWNPIPE 100 X 90 REDUCER
ID
14880 90 x 100 112
17498 150 x 100 112
NOTES• 14880 reduces 100mm DWV socket to suit 90mm outer diameter Stormwater• 17498 reduces 150mm Stormwater socket to suit 100mm outer diameter Stormwater
www.plastec.com.auD.6
MULTI
NOTES• A mul sized adaptor which can reduce mul ple diameters
ID
15282 40-90 60
ID
15575 40-100 60
40MM SOCKET
50MM SOCKET
65MM SOCKET
75MM SOCKET
90MM PIPE
40MM SOCKET
50MM SOCKET
65MM SOCKET
75MM SOCKET
90MM PIPE
100MM PIPE
FINISHING COLLARS & GRATES
ROUND BODY NO GRATE
ID OUTLET
15034 90 SPIGOT 72
RELATED PRODUCTS• DWV versions available pg B.40 - 11666 & 11667
SQUARE BODY NO GRATE
RELATED PRODUCTS• DWV versions available pg B.41 - 15702 ID OUTLET FLANGE DIA
15904 90 SPIGOT 163 SQUARE 48
ID OUTLET
15036 90 SPIGOT 70
KIT FLAT GRATE
RELATED PRODUCTS• DWV versions available pg B.39 - 11662, 17430 & 11663
D.7D.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
KIT DOMED GRATE
ID OUTLET
15035 90 SPIGOT 60
RELATED PRODUCTS• DWV versions available pg B.39 - 11660 & 11661.
SQUARE KIT FLAT GRATE
ID OUTLET FLANGE DIA
15635 90 SPIGOT 163 SQUARE 56
RELATED PRODUCTS• DWV versions available pg B.39 - 15622
SQUARE KIT DOMED GRATE
ID OUTLET FLANGE DIA
15634 90 SPIGOT 163 SQUARE 42
RELATED PRODUCTS• DWV versions available pg B.40 - 15621
RECTANGLE & GRATE ASSEMBLY
NOTES• Recessed grate ID OUTLET FLANGE DIA
17262 90 SPIGOT 150 X 180 RECTANGLE
46
NOTES• Suit 90 pipe size and 90 spigot• Removable bayonet grate
ID SUIT
14973 90 Pipe x 90 Spigot 144
GRATE
STORMWATER GRATES
www.plastec.com.auD.8
FROG FLAPS
STAINLESS STEEL COVER
NOTES• Stainless steel mesh• Mozzie resistant
ID
15255 90 50
RELATED PRODUCTS• DWV version available pg B.20 - 16374
DOWNPIPE ADAPTORS/DROPS
DOWNPIPE ADAPTOR RECTANGLE TO ROUND
NOTES• Used to connect rectangular down pipe to round Stormwater pipe
ID
15122 100 x 50 x 90 84
15618 95 x 45 x 90 85
15123 100 x 80 x 90 65RELATED PRODUCTS• Stormfl ex versions available pg D.14 - 14732, 16255 & 14386
ROUND
NOTES• Designed to fi t into relevant pipe size
ELONGATED
NOTES• Outlet is 90mm ID Stormwater pipe
ID
14706 50 150
14576 65 100
15121 90 144
13869 100 80
13871 150 40
ID
15590 90 110
HALF ROUND GUTTER OUTLET ROUND
NOTES• Suits half round gu er ID
14688 90 80
16362 100 70
D.9D.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
DOWNPIPE FITTINGS - RECTANGLE
FACE WIDE ENTRY F/F 45 DEGREES
FACE WIDE ENTRY F/F 95 DEGREES
SIDE NARROW ENTRY F/F 45 DEGREES
ID
16386 100 x 50 60
16388 100 x 65 60
ID
16399 100 x 50 65
16402 100 x 65 50
ID
16398 100 x 50 75
16401 100 x 65 65
ID
16387 100 x 50 50
16389 100 x 65 45
SIDE NARROW ENTRY F/F 95 DEGREES
NOTES• Quality white fi nish
RELATED PRODUCTS• 100x50 & 16280 100x65 On Wall Bracket pg A.8 - 16279• 100x50 & 16278 100x65 Off Wall Bracket pg A.8 - 16277
NOTES• Quality white fi nish
RELATED PRODUCTS• 100x50 & 16280 100x65 On Wall Bracket pg A.8 - 16279• 100x50 & 16278 100x65 Off Wall Bracket pg A.8 - 16277
NOTES• Quality white fi nish
RELATED PRODUCTS• 100x50 & 16280 100x65 On Wall Bracket pg A.8 - 16279• 100x50 & 16278 100x65 Off Wall Bracket pg A.8 - 16277
NOTES• Quality white fi nish
RELATED PRODUCTS• 100x50 & 16280 100x65 On Wall Bracket pg A.8 - 16279• 100x50 & 16278 100x65 Off Wall Bracket pg A.8 - 16277
www.plastec.com.auD.10
NOTES• Quality white fi nish
NOTES• Quality white fi nish
DOWNPIPE CONNECTOR
ID
16129 100 x 50 x 30 50
16130 100 x 65 x 30 40
ID
13856 100 x 50 80
13847 100 x 65 90
DOWNPIPE OFFSET 30MM
RECTANGLE
ID
13859 100 x 50 140
14545 100 x 65 130
RECTANGLE 100 X 65MM ID PIPE/OD PIPE
ID
16390 100 x 65 55
NOTES• Fits into pipe
NOTES• Fits into pipe or socket fi ng
NOTES• ABS and can be solvent welded
ID
15161 90 25 200
ID
15103 90 180
TAPERED
NOTES• ABS and can be solvent welded
FLOOR FLANGESRAISED SHOULDER
D.11www.plastec.com.au D.11DIAMETER FASTENING BAG QTY CARTON QTY COLOUR MEASUREMENT MM
STORMFLEXSTORMWATER
BENDS
STORM FLEX CONNECTOR 45 DEGREES
ID INLET OUTLET
15787 90 SW Pipe 100 Storm Flex 40
STORM FLEX CONNECTOR 90 DEGREES
ID INLET OUTLET
15788 90 SW Pipe 100 Storm Flex 30
STORM FLEX 100MM CONNECTOR
NOTES• Can be cut in half to connect to stormwater
ID
15758 100 32
COUPLINGS
www.plastec.com.auD.12
100 X 90 REDUCER MULTIFIT
NOTES• Used to connect 90mm ID or socket to 100mm ID or socket stormwater pipework
100MM CONNECTOR MULTIFIT
100 X 90 ADAPTOR
NOTES• Pipe is 100 pipe size ID INLET OUTLET
15253 100 SOCKET STORM FLEX 90 SOCKET DWV 70
15126 100 SOCKET STORM FLEX 90 PIPE SIZE DWV 70
ID
15748 100 x 90 75
ID
15747 100 30
CONNECTOR
NOTES• No need to tape ends as pipe is secured in connec on with internal locking system
ID
15125 100 60
D.13www.plastec.com.au D.13DIAMETER FASTENING BAG QTY CARTON QTY COLOUR MEASUREMENT MM
STRAIGHT
ID INLET OUTLET
15785 90 SW Pipe 100 Storm Flex 30
16424 100 SW Pipe 100 Storm Flex/ 100 ID DWV
30
15 DEGREES
ID INLET OUTLET
15786 90 SW Pipe 100 Storm Flex 24
JUNCTIONS
T 90 DEGREES
NOTES• No need to tape ends as pipe is secured in connec on with internal locking system• To remove pipe simply unclip blue ring
ID ANGLE
15750 100 90 18
END CAPS
CAP
NOTES• Clips onto pipe• Protects debris entering the pipe• No tape required• Cap clips securely onto pipe
ID
15609 100 10 160
www.plastec.com.auD.14
DOWNPIPE ADAPTORS
DOWNPIPE ADAPTOR RECTANGLE TO ROUND
NOTES• Used to connect rectangular down pipe to round Stormwater pipe
ID SUITS
15122 100 x 50 x 90 DWV 84
15618 95 x 45 x 90 DWV 85
15123 100 x 80 x 90 DWV 65
14732 100 x 50 STORMFLEX 40
16255 100 x 65 STORMFLEX 40
14386 100 x 80 STORMFLEX 50
RELATED PRODUCTS• Stormwater versions available pg D.8 - 15122, 15618 & 15123
D.15D.15DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
RAINWATERSTORMWATER
LEAF GUARDS
BOTTOM OUTLET
ID
15623 90 14
BOTTOM OUTLET 30 OFFSET
ID
16296 90 14
16584 100 14
NOTES• Outlet set out 30mm from back wall• Stainless steel grille
NOTES• Stainless steel grille
REAR OUTLET
ID
15730 90 12
NOTES• Stainless steel grille
www.plastec.com.auD.16
LEAF CATCHERS
BOTTOM OUTLET 100 X 50
ID OUTLET
16391 100 x 50 8
NOTES• Pipe pushes over outlet and into sleeve for aesthe c fi nish
BOTTOM OUTLET
ID OUTLET
16291 90 8
16253 100 8
ID OUTLET
16292 90 8
BOTTOM OUTLET 30 OFFSET
BOTTOM OUTLET 100 X 65
ID OUTLET
16392 100 x 65 8
NOTES• Pipe pushes over outlet and into sleeve for aesthe c fi nish
NOTES• Pipe pushes over outlet and into sleeve for aesthe c fi nish
NOTES• Pipe pushes over outlet and into sleeve for aesthe c fi nish• Supplied with 2 wall brackets
D.17D.17DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ID
14687 90 42
16353 100 TBA
TANK OVERFLOW FLANGED ELBOW
NOTES• A space saving tank connector used to connect Stormwater pipe to a tank• Can increase water capacity if the tank
FIRST FLUSH DIVERTERS
ID
14550 90 8
FIRST FLUSH DIVERTER
90MM WATER DIVERTER SCREW CAP + CONNECTOR
NOTES• Used in conjunc on with Leaf Guard range
NOTES• Ideal for hose connec on• Suits fi rst fl ush tank diverters
ID INLET OUTLET
15936 90 25mm BSP 80
TANK OUTLETS
ID
16696 90 200
16695 100 170
TANK ELBOW SEAL
NOTES• No silicone required• ID 16696 suits ID 14687 fl anged elbow• ID 16695 suits ID 16353 fl anged elbow
www.plastec.com.auD.18
ID
14689 90 100
16361 100
TANK OUTLET CORRUGATED
NOTES• Used to connect stormwater pipework to corrugated rain water tanks• Pipe size
ID
16354 90 60
16355 100 65
NOTES• Used to connect stormwater pipe work to a corrugated tank• Slight curve in base to accommodate curve in slimline tanks• Socket size
TANK CONNECTOR SLIM LINE
NOTES• Mozzie resistant mesh.• Ideal for water tank installa ons.
MOZZIE STOPPER ADAPTOR M&F
ID SUIT
15592 90 OD Pipe x 90 ID Pipe 1 60
14672 100 OD Pipe x 100 ID Pipe 1 39
ID
17825 90 30
OVERFLOW KIT
eWASTE CONNECTORS
FLEXIBLE CONNECTORS...E.1FLEXIDINGERS...E.1
OVERFLOW ASSEMBLY...E.3
HUMDINGER KITS...E.5
ADJUSTABLE WASTE CONNECTORS...E.7BATH WASTE CONNECTORS...E.7
SHOWER WASTE CONNECTORS...E.8
E.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM E.1
FLEXIBLE CONNECTORS
WASTE CONNECTORS
FLEXIDINGERS
SOLVENT WELD OUTLET BRASS GRATE PVC PLUG
ID
40x40 DWV 75 WHITE 38
ID
40x40 DWV 75 CHROME 3811710 11713
SOLVENT WELD OUTLET BRASS GRATE BRASS DELUXE PLUG
ID
15544 40x40 DWV 75 WHITE 35
ID
15538 40x40 DWV 75 CHROME 35
Plastec Flexidingers are fl exible bath connectors, ideal for accommoda ng varying angles and gradients where space below spas and baths is limited.
Supplied with a fl exible tube with a smooth internal bore, the tube is designed to facilitate movement of the spa/bath when subjected to large volumes of hot water.
Flexible tube is suitable for solvent welding and is supplied as part of Flexidingers at 300mm in length, which can be cut to the desired shorter length. Flexible tube can also be purchased separately (pg K.3 - 14921) in 1.2m lengths.
IMPORTANT: DO NOT BEND OR INSTALL FLEXIBLE TUBE AT A TIGHT ACUTE ANGLE OF LESS THAN 90
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
GRATE GRATE
GRATE GRATE
www.plastec.com.auE.2
SOLVENT WELD OUTLET BRASS POP UP
SOLVENT WELD OUTLET CAP & LINING
ID
14947 40x40 DWV 75 CHROME 32
ID TYPE
11736 40x40 DWV 88 LOOSE NUT 45
FLEXIDINGER SHOWER ONE PIECE BRASS GRATE
NOTES• Suitable for pressed steel showers
ID
11730 80x40 DWV WHITE 35
ID
11733 80x40 DWV CHROME 35
NOTES• Not suitable for pressed steel showers
FLEXIDINGER SHOWER TWO PIECE BRASS GRATE
ID
15133 80x40 DWV CHROME 35
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
GRATE
GRATE GRATE
GRATE
E.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM E.3
BRASS SPA BATH WASTE WITH OVERFLOW ASSEMBLY
NOTES• 1.2m fl exible tube length supplied• Hose can be cut to length• Solvent weld pipe into fi ngs
ID TUBE
15141 40 1.2m CHROME 20
OVERFLOW ASSEMBLY
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 14921
www.plastec.com.auE.4
E.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM E.5
HUMDINGER KITSWASTE CONNECTORS
PVC PLUG
NOTES• Cut 40mm DWV pipe to desired length and push into HD elbows
ID INLET OUTLET
11746 40mm 40 DWV CHROME 35
ID INLET OUTLET
11745 40mm 40 DWV WHITE 35
ID INLET OUTLET
11743 40mm 40 DWV CHROME 70
ID INLET OUTLET
11740 40mm 40 DWV WHITE 70
DELUXE PLUG
NOTES• Cut 40mm DWV pipe to desired length and push into HD elbows
GRATE GRATE
GRATE GRATE
www.plastec.com.auE.6
ID INLET OUTLET
15157 40mm 40 DWV CHROME 30
ID INLET OUTLET
15156 40mm 40 DWV WHITE 17
OVERFLOW
NOTES• Cut 40mm DWV pipe to desired length and push into Humdinger elbow• All rubber ring joints, no gluing required• Drill out nipple to connect overfl ow• Overfl ow connec on can be drilled out to accommodate overfl ow
GRATE GRATE
E.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM E.7
ADJUSTABLEWASTE
CONNECTORSWASTE CONNECTORS
BATH WASTE CONNECTORS
NOTES• Side connec on accommodates overfl ow• Suitable for both 40mm and 50mm outlet pipe• PVC plug
ID INLET REAROUTLET
BOTTOMOUTLET
15111 40 40 40/50 WHITE 20
ID INLET REAROUTLET
BOTTOMOUTLET
15113 40 40 40/50 CHROME 21
15597 50 40 40/50 CHROME 20
TRIPLE CONNECTOR
RELATED PRODUCTS• Overfl ow Assembly can be purchased separately pg E.3 - 15140
NOTE: The minimum installa on height between the fl oor and bo om of the bath waste outlet must be 85mm. If bath is to be installed higher, cut 40mm DWV pipe to length ensuring that the distance between the end of the pipe and bo om of the bath waste outlet is between 85mm and 125mm.
15111
GRATE
GRATE
www.plastec.com.auE.8
SINGLE CONNECTOR
NOTES• Suitable for both 40mm and 50mm outlet pipe•Adjustable inlet setout• PVC plug
ID INLET BOTTOMOUTLET
15108 40 40/50 WHITE 20
ID INLET BOTTOMOUTLET
15110 40 40/50 CHROME 25
15598 50 40/50 CHROME 20
SHOWER WASTE CONNECTORS
TRIPLE CONNECTOR TWO PIECE
NOTES• Side connec on accommodates overfl ow• Suitable for both 40mm and 50mm outlet pipe• Adjustable inlet setout
ID INLET REAROUTLET
BOTTOMOUTLET
15114 80 40 40/50 CHROME 20
RELATED PRODUCTS• Spares kits can be purchased separately pg K.4 - 17229 & 17486
15108
GRATE
GRATE
GRATE
E.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM E.9
SINGLE CONNECTOR TWO PIECE
NOTES• Suitable for both 40mm and 50mm outlet pipe• Adjustable inlet setout
ID INLET BOTTOMOUTLET
15115 80 40/50 CHROME 25
RELATED PRODUCTS• Spares kits can be purchased separately pg K.4 - 17483
GRATE
www.plastec.com.auE.10
fPLUG & WASTES
PLUGS...F.1
PROTEC...F.3SHORT TAIL...F.3LONG TAIL...F.4
PLASTIC...F.5
SHOWER & SINK WASTES...F.7SHOWER WASTES...F.7
SINK WASTES...F.7
CLASSIC...F.1DELUX...F.1
F.1F.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
STANDARD PVC
CLASSIC RUBBER
ID
11930 32 BLACK 200 1000
11931 38 BLACK 200 600
11933 50 BLACK 200 400
11934 55 BLACK 100 500
BRASS/RUBBER
ID
11924 40 WHITE 550
11927 50 WHITE 380
14669 32 WHITE 100 1200
ID
11926 40 BLACK 550
11929 50 BLACK 380
ID
15651 32 WHITE 10 200
15653 38 WHITE 10 200
15545 40 WHITE 10 200
15657 50 WHITE 5 100
ID
14785 30 CHROME 10 200
11940 32 CHROME 10 200
11948 38 CHROME 10 200
11944 40 CHROME 10 200
11946 50 CHROME 5 100
CLASSIC
PLUGSPLUGS & WASTES
DELUX
www.plastec.com.auF.2
F.3F.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SHORT TAIL
PROTECPLUGS & WASTES
SHORT TAIL STAINLESS STEEL GRATE PVC PLUG
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Reduces height under basin• Length measurement is total height of threaded waste• Drop grate into basin and use screw to connect to waste under basin• Minimum basin thickness 10mm
SHORT TAIL BRASS GRATE PVC PLUG
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Reduces height under basin• Length measurement is total height of threaded waste• Solid brass grate• Drop grate into basin and use screw to connect to waste under basin• Minimum basin thickness 10mm
ID INLET OUTLET
14944 40 40 28 S/STEEL 30
ID INLET OUTLET
14941 40 40 28 CHROME 30
SHORT TAIL BRASS GRATE BRASS DELUXE PLUGNOTES• All wastes can be installed on fi xtures with or without an overfl ow• Reduces height under basin• Length measurement is total height of threaded waste• Solid brass grate• Drop grate into basin and use screw to connect to waste under basin• Minimum basin thickness 10mm
ID INLET OUTLET
14934 40 40 28 CHROME 30
SHORT TAIL BRASS POP UP
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Reduces height under basin• Length measurement is total height of threaded waste• Solid brass pop-up assembly• Drop grate into basin and use screw to connect to waste under basin • Minimum basin thickness 30mm
ID INLET OUTLET
14938 40 40 28 CHROME 25
GRATE
GRATE
GRATE
GRATE
www.plastec.com.auF.4
LONG TAIL
LONG TAIL STAINLESS STEEL GRATE PVC PLUG
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Length measurement is total height of threaded waste• Ideal for stainless steel basins or basins with reduced wall sec on• Full chrome body ideal for exposed installa ons• Minimum basin thickness 10mm
LONG TAIL BRASS GRATE PVC PLUG
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Length measurement is total height of threaded waste• Ideal for stainless steel basins or basins with reduced wall sec on• Minimum basin thickness 10mm
LONG TAIL BRASS GRATE BRASS DELUXE PLUG
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Length measurement is total height of threaded waste• Ideal for stainless steel basins or basins with reduced wall sec on• Minimum basin thickness 10mm
ID INLET OUTLET
14930 40 40 60 S/STEEL 25
ID INLET OUTLET
14929 40 40 60 CHROME 25
ID INLET OUTLET
14932 40 40 60 CHROME 25
LONG TAIL BRASS POP UP
NOTES• All wastes can be installed on fi xtures with or without an overfl ow• Length measurement is total height of threaded waste• Ideal for stainless steel basins or basins with reduced wall sec on• Full chrome body ideal for exposed installa ons• Minimum basin thickness 10mm
ID INLET OUTLET
14936 40 40 60 CHROME 20
GRATE
GRATE
GRATE
GRATE
F.5F.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
PLASTICPLUGS & WASTES
STANDARD PVC PLUGNOTES• Pressed stainless steel, plas c grate• Length measurement is total height of threaded waste
ID
15137 32 75 WHITE 60
11760 40 75 WHITE 50
ID
15055 32 75 S/STEEL 200
11762 40 75 S/STEEL 50
EXTENDED PVC PLUG
NOTES• Pressed stainless steel, plas c grate• Length measurement is total height of threaded waste• All wastes are extended lengths for thicker basins
ID
15205 32 90 WHITE 50
11773 40 90 WHITE 54
ID
15206 32 90 S/STEEL 53
11775 40 90 S/STEEL 50
EXTENDED WITH OVERFLOW CONNECTION PVC PLUG
NOTES• Pressed stainless steel, plas c grate• Length measurement is total height of threaded waste
ID
13691 32 90 WHITE 54
11783 40 90 WHITE 54
ID
15211 32 90 S/STEEL 53
11785 40 90 S/STEEL 50
RIM RIM
RIMRIM
RIM RIM
www.plastec.com.auF.6
50MM WASTES PVC PLUG
NOTES• Pressed stainless steel, plas c grate• Length measurement is total height of threaded waste
ID
11786 50 50 WHITE 42
ID
11788 50 50 S/STEEL 42
PLUG & WASTE ELBOW WITH OVERFLOW PVC PLUG
NOTES• Flexi fi n connec on pushes into 40mm DWV• Chrome plated, plas c grate• Height = elbow height• Overfl ow can be drilled out if required• Use 20mm hose when connec ng to overfl ow
ID OUTLET
11796 40DWV 85 WHITE 70
ID OUTLET
11798 40DWV 85 CHROME 70
RIM RIM
RIM RIM
F.7F.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SHOWER & SINK WASTESPLUGS & WASTES
PLASTIC GRATE
ID
11789 80 x 50 74 WHITE 52
ID
11793 80 x 50 74 CHROME 52
SHOWER WASTES
STAINLESS STEEL GRATE PVC PLUG
NOTES• Two piece waste• Length measurement is total height of threaded waste
ID
11794 50 x 50 50 S/STEEL 42
SINK WASTES
90 X 50 STAINLESS STEEL GRATE PVC PLUG
NOTES• Two piece waste• Length measurement is total height of threaded waste• Wide fl ange to cover waste disposal hole
ID
13754 90 x 50 55 S/STEEL 36
GRATE GRATE
GRATE
GRATE
www.plastec.com.auF.8
90 X 50 STAINLESS STEEL BASKET WASTE
NOTES• Length measurement is total height of threaded waste
ID
15228 90 x 50 60 S/STEEL 60GRATE
gFLOOR WASTE GRATES
PLASTIC...G.1
SOLVENT WELD...G.2SOCKET & SPIGOT...G.3
PLAS-FIN...G.4RUBBER RING JOINT (RRJ)...G.5
BRASS...G.7ROUND...G.7
SQUARE...G.8
VINYL FLOOR WASTES...G.9SOLID BRASS...G.9
FLEXI FIN...G.10SOLVENT WELD...G.10
STANDARD..G.1
G.1G.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
PLASTICFLOOR WASTE GRATES
SQUARE
NOTES*• Chrome plated plas c grate• Suitable for maxi adaptor and twist top fl oor waste kits• Spigot outlet which can be solvent welded to standard DWV pipework
ROUND
NOTES*• Chrome plated plas c grate• Suitable for maxi adaptor and twist top fl oor waste kits• Spigot outlet which can be solvent welded to standard DWV pipework
ROUND STAINLESS
NOTES• Pressed stainless steel grate with ASA body• Suitable for maxi adaptor and twist top fl oor waste kits• Spigot outlet which can be solvent welded to standard DWV pipework
ID
12370 80 10 WHITE 154
12373 100 10 WHITE 90
ID
12372 80 10 CHROME* 154
12375 100 10 CHROME* 75
ID
12390 80 10 WHITE 152
12393 100 10 WHITE 75
ID
12392 80 10 CHROME* 152
12395 100 10 CHROME* 75
ID
12400 80 10 S/STEEL 154
12401 100 10 S/STEEL 75
MOĎ@.ĎL.
GRATE GRATE
GRATE GRATE
GRATE
www.plastec.com.auG.2
SOLVENT WELD
NOTES*• Chrome grate with ASA body**• Pressed stainless steel grate with ASA body• Spigot outlet which can be solvent welded to standard DWV pipework
ROUND
ID
12670 50 50 WHITE 250
12674 80 50 WHITE 84
12677 100 50 WHITE 36
ID
12672 50 50 CHROME* 250
12676 80 50 CHROME* 84
12679 100 50 CHROME* 36
ID
12673 50 50 S/STEEL** 250
SQUARE
NOTES*• Chrome grate with ASA body• Spigot outlet which can be solvent welded to standard DWV pipework
ID
12692 50 50 CHROME* 180
12695 80 50 CHROME* 75
12698 100 50 CHROME* 36
ID
12690 50 50 WHITE 180
12693 80 50 WHITE 75
12696 100 50 WHITE 36
SQUARE STAINLESS
NOTES• Pressed stainless steel grate with ASA body• Suitable for maxi adaptor and twist top fl oor waste kits• Spigot outlet which can be solvent welded to standard DWV pipework
ID
12420 80 10 S/STEEL 152
12421 100 10 S/STEEL 75
GRATE
GRATE GRATE
GRATE
GRATE GRATE
G.3G.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
OCTAGONAL
ID
12682 50 50 CHROME* 210
12686 80 50 CHROME* 84
12689 100 50 CHROME* 90
ID
12680 50 50 WHITE 210
12684 80 50 WHITE 84
12687 100 50 WHITE 90
ID
12683 50 50 S/STEEL** 250
SOCKET & SPIGOT
ROUND STAINLESS
NOTES• Pressed stainless steel grate with ASA body• Pa erned grate available on request• Suitable for the 80 x 50mm or 80 x 80mm puddle fl anges• Spigot outlet
ID
12562 100 x 80 70 S/STEEL 36
ROUND STAINLESS
NOTES• Socket outlet• Pressed stainless steel grate with ASA body
ID
12564 80 x 50 78 S/STEEL 48
12570 80 x 80 78 S/STEEL 60
12560 100 x 50 78 S/STEEL 36
NOTES*• Chrome grate with ASA body**• Pressed stainless steel grate with ASA body• Spigot outlet which can be solvent welded to standard DWV pipework
RELATED PRODUCTS• Puddle Flange can be purchased separately pg H.1 - 12523 & 12521
GRATE GRATE
GRATE
GRATE
GRATE
www.plastec.com.auG.4
PLAS-FIN
ROUND
NOTES• Push into pipe - no solvent welding required• Spigot outlet to suit standard DWV pipe• Made from Polyprope Plas c
OCTAGONAL
NOTES• Spigot outlet to suit standard DWV pipe• Made from Polyprope Plas c• Push into pipe - no solvent welding required
ROUND STAINLESS
NOTES• Spigot outlet to suit standard DWV pipe• Made from Polyprope Plas c• Pressed stainless steel grate • Push into pipe - no solvent welding required
ID
12724 80 50 S/STEEL 78
12725 100 50 S/STEEL 45
ID
12712 80 50 WHITE 72
12714 100 50 WHITE 45
ID
12700 80 50 WHITE 78
12702 100 50 WHITE 45
OCTAGONAL STAINLESS
NOTES• Spigot outlet to suit standard DWV pipe• Made from Polyprope Plas c• Pressed stainless steel grate • Push into pipe - no solvent welding required
ID
12733 80 50 S/STEEL 72
12734 100 50 S/STEEL 45
GRATE
GRATE
GRATE
GRATE
G.5G.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
RUBBER RING JOINT (RRJ)
ROUND
NOTES• RRJ to suit internal diameter 100mm DWV pipework*• Chrome plated plas c grate• Push into DWV pipe - no solvent welding required
OCTAGONAL
SQUARE
NOTES• RRJ to suit internal diameter 100mm DWV pipework*• Chrome plated plas c grate• Push into DWV pipe - no solvent welding required
ID
12540 100 50 WHITE 75
ID
12542 100 50 CHROME* 75
ID
12544 100 50 WHITE 75
ID
12546 100 50 CHROME* 75
NOTES• RRJ to suit internal diameter 100mm DWV pipework*• Chrome plated plas c grate• Push into DWV pipe - no solvent welding required
ID
12548 100 50 WHITE 84
ID
12550 100 50 CHROME* 30
ROUND STAINLESS
NOTES• RRJ to suit internal diameter 100mm DWV pipework• Pressed stainless steel grate• Solvent welding not required
ID
12553 100 50 S/STEEL 45
GRATE GRATE
GRATE GRATE
GRATE GRATE
GRATE
www.plastec.com.auG.6
G.7G.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
CHROME BRASSFLOOR WASTE GRATES
ROUND
ROUND GRATE
NOTES• Drops into DWV pipe• Bayonet grate
ROUND LOOSE FIT SLOTTED GRATE
NOTES• 12863 suits 50 DWV pipe ID SYSTEM
12860 80 x 40 50 80 x 50 CHROME 50
12863 80 x 50 50 50 DWV CHROME 48
12866 80 x 65 50 80 x 80 CHROME 48
12864 100 x40 50 100 x 50 CHROME 30
12870 100 x 65 50 100 x 80 CHROME 24
12872 100 x 86 50 100 x100 CHROME 40
ID
12430 80 10 CHROME 4 80
12432 100 10 CHROME 100
SQUARE
SQUARE SLOTTED GRATE
NOTES• Drops into DWV pipe• Bayonet grate
ID
12460 80 10 CHROME 120
12462 100 10 CHROME 60
GRATE
GRATE
GRATE
www.plastec.com.auG.8
SQUARE LOOSE FIT SLOTTED GRATE
NOTES• 50mm spigot outlets• 12896 suits 50 DWV pipe
ID SYSTEM
12893 80 x 40 50 80 x 50 CHROME 50
12896 80 x 50 50 50 DWV CHROME 36
12899 80 x 65 50 80 x 80 CHROME 48
15901 100 x40 50 100 x 50 CHROME 24
12905 100 x86 50 100 x100 CHROME 40
GRATE
G.9G.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
VINYL FLOOR WASTESFLOOR WASTE GRATES
SOLID BRASS
OPEN GRATE
NOTES• Solid brass body and grate• Suits DWV pipe• Two-piece vinyl clamp system• Remove grate and surround to secure vinyl
ID SUIT
14958 100 x 80 CHROME DWV 12
14957 100 x100 CHROME DWV 12
SOLID COVER
NOTES• Solid brass body and cover• Suits DWV pipe• Two-piece vinyl clamp system
ID SUIT
15022 100 x 80 CHROME DWV 12
15021 100 x100 CHROME DWV 12
16851 100X100NONSLIP
CHROME DWV 12
RELATED PRODUCTS• HDPE versions available pg C.10 - 14959• Basket can be purchased separately pg G.12 - 15931• Open Grate can be purchased separately pg G.12 - 15288
RELATED PRODUCTS• HDPE versions available pg C.10 - 15019 & 17080• Basket can be purchased separately pg G.12 - 15931• Solid Covers can be purchased separately pg K.4 - 15289 & 16723
GRATE
GRATE
www.plastec.com.auG.10
FLEXI FIN
ADJUSTABLE BRASS SOLID COVER
ADJUSTABLE BRASS/STAINLESS STEEL OPEN GRATE
NOTES• Nylon body with chrome brass/stainless steel lid
ID
13645 80 x 50 CHROME 66
12001 80 x 80 CHROME 36
12002 100 x100 CHROME 20
16647 100 x100 S/STEEL 16
ID
15274 80 x 50 CHROME 36
12013 80 x 80 CHROME 36
12014 100 x100 CHROME 20
16724 100 x100 CHROME NON SLIP 16
SOLVENT WELD
BRASS OPEN GRATE OUTLET
BRASS SOLID COVER OUTLET
NOTES• Solvent weld into DWV pipe• Solid brass grate with plas c body• Two-piece vinyl clamp system
ID
12006 80 x 50 CHROME 24
12007 80 x 80 CHROME 16
12008 100 x100 CHROME 20
ID
12018 80 x 50 CHROME 24
12019 80 x 80 CHROME 16
12020 100 x100 CHROME 20
17557 100x100NONSLIP
CHROME 20
RELATED PRODUCTS• HDPE versions available pg C.10 - 14812 & 14811• Open Grates can be purchased separately pg K.4 - 14597 & 15288
RELATED PRODUCTS• HDPE versions available pg C.10 - 15032, 15024 & 16725• Solid Covers can be purchased separately pg K.4 - 14598, 15289 & 16723
RELATED PRODUCTS• Basket can be purchased separately pg G.12 - 15931• Open Grates can be purchased separately pg K.4 - 14597 & 15288
RELATED PRODUCTS• Basket can be purchased separately pg G.12 - 15931• Solid Covers can be purchased separately pg K.4 - 14598, 15289 & 16723
GRATE
GRATE
GRATE
GRATE
G.11G.11DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
BRASS OPEN GRATE FLANGE
NOTES• Suitable for installa on onto mber fl oors• Flange recommended to be recessed level with the fl oor • Solvent weld into DWV pipe
BRASS SOLID COVER FLANGE
NOTES• Suitable for installa on onto mber fl oors• Flange recommended to be recessed level with the fl oor • Solvent weld into DWV pipe
ID
14809 80 x 80 CHROME 20
14808 100 x100 CHROME 12
ID
14967 80 x 80 CHROME 20
14966 100 x100 CHROME 12
RELATED PRODUCTS• Basket can be purchased separately pg G.12 - 15931• Solid Covers can be purchased separately pg K.4 - 14598 & 15289
RELATED PRODUCTS• Basket can be purchased separately pg G.12 - 15931• Open Grates can be purchased separately pg K.4 - 14597 & 15288
GRATE
GRATE
BRASS OPEN GRATE TIMBER FLOOR ADJUSTABLE
NOTES• Suitable for installa on onto mber fl oors ID
17475 80 x 80 CHROME 25
17485 100 x100 CHROME 12
RELATED PRODUCTS• Basket can be purchased separately pg G.12 - 15931• Solid Covers can be purchased separately pg K.4 - 14598 & 15289
GRATE
www.plastec.com.auG.12
BASKETS
VINYL FLOOR BASKET STAINLESS STEEL
NOTES• Easily retrofi ed to all 100 x 100 Vinyl Floor Wastes• Prevents debris from entering the drain
ID SUIT
15931 100 CHROME 100 x100 12GRATE
hLEAK CONTROL SYSTEMS
PUDDLE FLANGES...H.1PUDDLE FLANGES & ADAPTORS...H.1
LEAK CONTROL ADAPTORS...H.2SAFE TRAY FLANGES...H.2
ULTIMATE FLOOR WASTE SYSTEMS...H.3SOLVENT WELD OUTLETS...H.3
RUBBER RING JOINT...H.4
MAXI ADAPTER SYSTEMS...H.5SOLVENT WELD OUTLETS...H.5
RRJ ADJUSTABLE OUTLETS...H.6ROUND COPPER WASTES...H.7
SQUARE FLANGES...H.7KIT ONLY...H.8
SWIVEL SYSTEMS...H.9SOLVENT WELD OUTLETS...H.9
RRJ ADJUSTABLE OUTLETS...H.10FLEXI-FIN...H.11
THREADED...H.11
TWIST TOP SYSTEMS...H.13RECESSED - SOLVENT WELD...H.13
RECESSED - RRJ ADJUSTABLE...H.14SURFACE MOUNTED - SOLVENT WELD...H.16
SURFACE MOUNTED - RRJ ADJUSTABLE...H.17THREADED FLANGE SYSTEMS...H.18
TWIST TOP ACCESSORIES...H.19KITS ONLY...H.20
H.1H.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
PUDDLE FLANGE
NOTES• Protec ve cover supplied to prevent entry of foreign material• Protec ve cap supplied
PUDDLE FLANGE ADAPTOR
PUDDLE FLANGE WITH ADAPTOR
NOTES• Protec ve cover supplied to prevent entry of foreign material
ID OUTLET
14794 80 x 50 SPIGOT 30
14793 80 x 80 SPIGOT 25
14791 100 x100 SPIGOT 24
14792 80 x 50 SOCKET 30
ID OUTLET
12523 80 x 50 SPIGOT 40
12521 80 x 80 SPIGOT 40
12522 100 x100 SPIGOT 30
12520 80 x 50 SOCKET 40
ID
14776 80 x 75 90
12537 100 x 80 96
NOTES• 14776 suitable for use with 80 x 80 or 80 x 50 puddle fl anges• 12537 suitable for use with 100 x 100 puddle fl anges
PUDDLE FLANGES & ADAPTORS
PUDDLE FLANGESLEAK CONTROL SYSTEMS
www.plastec.com.auH.2
LEAK CONTROL ADAPTORS
LOOSE FIT DWV
NOTES• Provides a leak control solu on where a puddle fl ange is not used• Water resistant down into the pipe and then install an adaptor with a stubby grate• Pipe = pipe size
ID INLET PIPE
12661 100 100 35
12665 100 80 60
12664 100 50 90
12660 80 80 TBA
12662 80 50 237
SAFE TRAY FLANGES
SAFE TRAY FLANGE
ID FLANGE INLET
12530 200 40 70
12531 200 50 65
12532 200 80 70
12533 200 100 50
PUDDLE FLANGE CAP
NOTES• Easily removable• Prevents the entry of foreign material
ID
15766 80 280
15725 100 165
H.3H.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ULTIMATE FLOOR WASTE SYSTEMS
LEAK CONTROL SYSTEMS
SOLVENT WELD OUTLET
ROUND
NOTES• 3 degrees of pivo ng movement on 100mm and 80mm versions• Grate screws fl at to fl ange reducing le bed height requirements• Solvent weld into DWV pipe• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID
17524 100 CHROME TBA
17540 80 CHROME TBA
18062 80 x 50 CHROME TBA
GRATE
SQUARE
ID
17525 100 CHROME TBA
17541 80 CHROME COMING SOON
18063 80 x 50 CHROME TBA
GRATE
SMART TILE
ID
17522 100 S/STEEL TBA
17542 80 S/STEEL TBA
17661 80 x 50 S/STEEL COMING SOON
GRATE
NOTES• 3 degrees of pivo ng movement on 100mm and 80mm versions• Grate screws fl at to fl ange reducing le bed height requirements• Solvent weld into DWV pipe• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
NOTES• 3 degrees of pivo ng movement on 100mm and 80mm versions• Grate screws fl at to fl ange reducing le bed height requirements• Solvent weld into DWV pipe• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
www.plastec.com.auH.4
RUBBER RING JOINT (RRJ) OUTLET
ROUND
ID
17547 100 CHROME TBA
17543 80 CHROME TBA
18064 80 x 50 CHROME TBA
GRATE
SQUARE
ID
17548 100 CHROME TBA
17544 80 CHROME TBA
18065 80 x 50 CHROME TBA
GRATE
SMART TILE
ID
17546 100 S/STEEL TBA
17545 80 S/STEEL TBA
17669 80 x 50 S/STEEL COMING SOON
GRATE
NOTES• 3 degrees of pivo ng movement on 100mm and 80mm versions• Grate screws fl at to fl ange reducing le bed height requirements• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
NOTES• 3 degrees of pivo ng movement on 100mm and 80mm versions• Grate screws fl at to fl ange reducing le bed height requirements• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
NOTES• 3 degrees of pivo ng movement on 100mm and 80mm versions• Grate screws fl at to fl ange reducing le bed height requirements• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
H.5H.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
MAXI ADAPTOR SYSTEMSLEAK CONTROL SYSTEMS
SOLVENT WELD OUTLET
ROUND CHROME BRASS GRATE
NOTES• Solvent weld into DWV pipe• Adjust height by raising adaptor• Adapter + grate measurement is 16mm
SQUARE CHROME BRASS GRATE
NOTES• Solvent weld into DWV pipe• Adjust height by raising adaptor
ROUND STAINLESS STEEL GRATE
NOTES• Pressed stainless steel grate• Solvent weld into DWV pipe• Adjust height by raising adaptor
ID
13312 80 x 50 CHROME 35
13313 80 x 80 CHROME 40
13314 100 x 50 CHROME 25
13315 100 x100 CHROME 28
ID
13739 80 x 50 CHROME 30
15213 80 x 80 CHROME 40
15214 100 x 50 CHROME 25
13738 100 x100 CHROME 28
ID
13316 80 x 50 S/STEEL 25
13317 80 x 80 S/STEEL 25
13318 100 x 50 S/STEEL 25
13319 100 x100 S/STEEL 25
GRATE
GRATE
GRATE
www.plastec.com.auH.6
RUBBER RING JOINT (RRJ) ADJUSTABLE OUTLET
ROUND CHROME BRASS GRATE
NOTES• No solvent welding required• Adjust height by raising adaptor
SQUARE CHROME BRASS GRATE
NOTES• No solvent welding required• Adjust height by raising adaptor
ROUND STAINLESS STEEL GRATE
NOTES• Pressed stainless steel grate• No solvent welding required• Adjust height by raising adaptor
ID
13346 80 x 50 S/STEEL 40
13347 80 x 80 S/STEEL 30
13348 100 x 50 S/STEEL 40
13349 100 x100 S/STEEL 30
ID
14155 80 x 50 CHROME 50
15234 80 x 80 CHROME 30
15233 100 x 50 CHROME 40
13736 100 x100 CHROME 16
ID
13342 80 x 50 CHROME 40
13343 80 x 80 CHROME 30
13344 100 x 50 CHROME 40
13345 100 x100 CHROME 16
GRATE
ROUND PLASTIC GRATE
NOTES• Chrome plated plas c grate• Solvent weld into DWV pipe• Adjust height by raising adaptor
ID
13305 80 x 50 CHROME 25
13307 80 x 80 CHROME 25
13309 100 x 50 CHROME 25
13311 100 x100 CHROME 24
ID
13304 80 x 50 WHITE 25
13306 80 x 80 WHITE 25
13308 100 x 50 WHITE 25
13310 100 x100 WHITE 25
GRATE GRATE
GRATE
GRATE
H.7H.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ROUND PLASTIC GRATE
NOTES• Chrome plated plas c grate• No solvent welding required• Adjust height by raising adaptor
ID
13334 80 x 50 WHITE 40
13336 80 x 80 WHITE 30
13338 100 x 50 WHITE 40
13340 100 x100 WHITE 32
ID
13335 80 x 50 CHROME 40
13337 80 x 80 CHROME 30
13339 100 x 50 CHROME 40
13341 100 x100 CHROME 35
ROUND COPPER WASTE
ROUND CHROME BRASS GRATE SUITS COPPER
NOTES• Pushes into 100mm copper• Secure fi t• No solvent welding
ID
15525 100 x100 CHROME 16
ROUND CHROME BRASS GRATE
NOTES• No solvent welding• Suits 100mm DWV
ID
14899 100 x100 CHROME 20
SQUARE CHROME BRASS GRATE
NOTES• No solvent welding• Suits 100mm DWV
ID
14901 100 x100 CHROME 20
SQUARE FLANGE
GRATE GRATE
GRATE
GRATE
GRATE
www.plastec.com.auH.8
KIT ONLY
ROUND FLANGE SOLVENT WELD OUTLET
NOTES• Supplied with protec ve cover• All stubby grates suitable for these systems
ROUND FLANGE RRJ ADJUSTABLE OUTLET
NOTES• Supplied with protec ve cover• All stubby grates suitable for these systems
ID
13330 80 x 50 40
13331 80 x 80 30
13332 100 x 50 40
13333 100 x100 35
ID
13300 80 x 50 25
13301 80 x 80 25
13302 100 x 50 25
13303 100 x100 28
SQUARE FLANGE RRJ ADJUSTABLE OUTLET
NOTES• Supplied with protec ve cover ID
15647 100 x100 20
MICRO FLOOR WASTE TRAP MAXI ADAPTOR
ID SHAPE
17071 100 x100 ROUND CHROME 25
17271 100 x 100 SQUARE CHROME 25
RELATED PRODUCTS• Elbow can be purchased separately pg B.3 - 17273
NOTES• Removable 75mm water trap
RELATED PRODUCTS• Stubby Grates can be purchased separately pg G.1 & G.7
RELATED PRODUCTS• Stubby Grates can be purchased separately pg G.1 & G.7
RELATED PRODUCTS• Stubby Grates can be purchased separately pg G.1 & G.7
CAP
H.9H.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SWIVEL SYSTEMSLEAK CONTROL SYSTEMS
SOLVENT WELD OUTLETS
ROUND CHROME BRASS GRATE
NOTES• Solvent weld into DWV pipe• Adjustable height
SQUARE CHROME BRASS GRATE
NOTES• Solvent weld into DWV pipe• Adjustable height
ID
12180 80 x 50 CHROME 32
12182 80 x 80 CHROME 42
12184 100 x100 CHROME 18
ID
12120 80 x 50 CHROME 35
12122 80 x 80 CHROME 25
12126 100 x 50 CHROME 25
12128 100 x 80 CHROME 25
12124 100 x100 CHROME 15
ROUND PLASTIC GRATE
NOTES• Chrome plated plas c grate• Solvent weld into DWV pipe• Adjustable height
ID
12110 80 x 50 WHITE 25
12113 80 x 80 WHITE 25
12116 100 x100 WHITE 25
ID
12112 80 x 50 CHROME 45
12115 80 x 80 CHROME 25
12118 100 x100 CHROME 25
GRATE
GRATE
GRATE GRATE
www.plastec.com.auH.10
RUBBER RING JOINT (RRJ) ADJUSTABLE OUTLETS
ROUND CHROME BRASS GRATE
NOTES• No solvent welding required• Adjustable height
SQUARE CHROME BRASS GRATE
NOTES• No solvent welding required• Adjustable height
ID
12210 80 x 50 CHROME 35
12212 80 x 80 CHROME 38
12214 100 x100 CHROME 20
16764 100x50 CHROME 20
ID
12150 80 x 50 CHROME 60
12152 80 x 80 CHROME 30
12136 100 x 50 CHROME 40
12138 100 x 80 CHROME 30
12154 100 x100 CHROME 25
ROUND PLASTIC GRATE
NOTES• Chrome plated plas c grate• No solvent welding required• Adjustable height
ID
12100 80 x 50 WHITE 40
12103 80 x 80 WHITE 30
12106 100 x100 WHITE 16
ID
12102 80 x 50 CHROME 45
12105 80 x 80 CHROME 30
12108 100 x100 CHROME 30
GRATE
GRATE
GRATE GRATE
H.11H.11DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
FLEXI FIN
ROUND CHROME BRASS GRATE
RELATED PRODUCTS• HDPE versions available pg C.9 - 13648 ID SUIT
13649 100 x100 CHROME DWV 20
SQUARE CHROME BRASS GRATE
RELATED PRODUCTS• HDPE versions available pg C.9 - 13661 & 15202
ID SUIT
13662 100 x100 CHROME DWV 20
THREADED
ROUND CHROME BRASS GRATE
NOTES• Screws straight onto 50mm trap• Reduces cavity space required
ID OUTLET
15727 80 x 50 CHROME 50 BSP 4
15726 100 x 50 CHROME 50 BSP 30
SQUARE CHROME BRASS GRATE
NOTES• Screws straight onto 50mm trap• Reduces cavity space required
ID OUTLET
15729 80 x 50 CHROME 50 BSP 30
15728 100 x 50 CHROME 50 BSP 25
GRATE
GRATE
GRATE
GRATE
www.plastec.com.auH.12
H.13H.13DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
TWIST TOP SYSTEMSLEAK CONTROL SYSTEMS
NOTES• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng thread-ed adapter• Addi onal reba ng required for shoulder of fl ange
NOTES• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
14918 80 x 50 SPIGOT CHROME 30
14919 80 x 80 SPIGOT CHROME 40
16759 100 x 50 SOCKET CHROME 25
16758 100 x 80 SPIGOT CHROME 30
15229 100 x100 SPIGOT CHROME 25
ID OUTLET
12270 80 x 50 SPIGOT CHROME 30
12271 80 x 80 SPIGOT CHROME 35
12273 100 x 80 SPIGOT CHROME 30
12274 100 x100 SPIGOT CHROME 24
12272 100 X 50 SOCKET CHROME 25
ROUND CHROME BRASS GRATE
SQUARE CHROME BRASS GRATE
RECESSED - SOLVENT WELD
NOTES• Pressed stainless steel grate• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
12260 80 x 50 SPIGOT S/STEEL 30
12261 80 x 80 SPIGOT S/STEEL 35
12263 100 x 80 SPIGOT S/STEEL 30
12264 100 x100 SPIGOT S/STEEL 25
12262 100 x 50 SOCKET S/STEEL 25
ROUND STAINLESS STEEL GRATE
GRATE
GRATE
GRATE
www.plastec.com.auH.14
ROUND PLASTIC GRATE
NOTES• Chrome plated grate• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
12250 80 x 50 SPIGOT WHITE 30
12252 80 x 80 SPIGOT WHITE 35
12256 100 x80 SPIGOT WHITE 30
12258 100 x100 SPIGOT WHITE 25
ID OUTLET
12254 100 x 50 SOCKET WHITE 25
ID OUTLET
12255 100 x 50 SOCKET CHROME 25 ID OUTLET
12251 80 x 50 SPIGOT CHROME 30
12253 80 x 80 SPIGOT CHROME 35
12257 100 x80 SPIGOT CHROME 30
12259 100 x100 SPIGOT CHROME 25
RECESSED - RRJ ADJUSTABLE
ROUND BRASS GRATE
NOTES• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
12300 80 x 50 SPIGOT CHROME 25
12301 80 x 80 SPIGOT CHROME 20
12302 100 x100 SPIGOT CHROME 24
GRATE GRATE
GRATEGRATE
GRATE
H.15H.15DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SQUARE CHROME BRASS GRATE
ROUND STAINLESS STEEL GRATE
ROUND PLASTIC GRATE
NOTES• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
15231 80 x 50 SPIGOT CHROME 25
15232 80 x 80 SPIGOT CHROME 37
15230 100 x100 SPIGOT CHROME 24
NOTES• Pressed stainless steel grate• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
12290 80 x 50 SPIGOT S/STEEL 25
12291 80 x 80 SPIGOT S/STEEL 20
12292 100 x100 SPIGOT S/STEEL 25
NOTES• Chrome plated grate• Grate can screw down level with fl ange height• Ideal for thin le beds• Adjust height by twis ng threaded adapter• Addi onal reba ng required for shoulder of fl ange
ID OUTLET
12280 80 x 50 SPIGOT WHITE 25
12282 80 x 80 SPIGOT WHITE 20
12284 100 x100 SPIGOT WHITE 24
ID OUTLET
12281 80 x 50 SPIGOT CHROME 25
12283 80 x 80 SPIGOT CHROME 20
12285 100 x100 SPIGOT CHROME 25
GRATE
GRATE
GRATE GRATE
www.plastec.com.auH.16
SURFACE MOUNTED - SOLVENT WELD
ROUND CHROME BRASS GRATE
SQUARE CHROME BRASS GRATE
ROUND STAINLESS STEEL GRATE
ROUND PLASTIC GRATE
NOTES• Adjust height by twis ng threaded adapter• Adapter + grate measurement is 16mm
ID OUTLET
12330 80 x 50 SPIGOT CHROME 50
12331 80 x 80 SPIGOT CHROME 40
12333 100 x 80 SPIGOT CHROME 20
12334 100 x100 SPIGOT CHROME 24
NOTES• Adjust height by twis ng threaded adapter
ID OUTLET
15224 80 x 50 SPIGOT CHROME 50
15225 80 x 80 SPIGOT CHROME 40
15223 100 x 80 SPIGOT CHROME 35
15222 100 x100 SPIGOT CHROME 24
NOTES• Pressed stainless steel grate• Adjust height by twis ng threaded adapter
ID OUTLET
12320 80 x 50 SPIGOT S/STEEL 25
12321 80 x 80 SPIGOT S/STEEL 20
12323 100 x 80 SPIGOT S/STEEL 20
12324 100 x100 SPIGOT S/STEEL 25
NOTES• Chrome plated grate• Adjust height by twis ng threaded adapter
ID OUTLET
12310 80 x 50 SPIGOT WHITE 25
12312 80 x 80 SPIGOT WHITE 35
12316 100 x 80 SPIGOT WHITE 20
12314 100 x100 SPIGOT WHITE 25
ID OUTLET
12311 80 x 50 SPIGOT CHROME 25
12313 80 x 80 SPIGOT CHROME 20
12317 100 x 80 SPIGOT CHROME 20
12315 100 x100 SPIGOT CHROME 25
GRATE
GRATE
GRATE
GRATE GRATE
H.17H.17DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
SURFACE MOUNTED - RRJ ADJUSTABLE
ROUND CHROME BRASS GRATE
SQUARE CHROME BRASS GRATE
ROUND STAINLESS STEEL GRATE
ROUND PLASTIC GRATE
NOTES• Adjust height by twis ng threaded adapter
NOTES• Adjust height by twis ng threaded adapter
ID OUTLET
15220 80 x 50 SPIGOT CHROME 25
15221 80 x 80 SPIGOT CHROME 16
15219 100 x100 SPIGOT CHROME 24
ID OUTLET
12360 80 x 50 SPIGOT CHROME 25
12361 80 x 80 SPIGOT CHROME 40
12362 100 x100 SPIGOT CHROME 24
NOTES• Pressed stainless steel grate• Adjust height by twis ng threaded adapter
ID OUTLET
12350 80 x 50 SPIGOT S/STEEL 25
12351 80 x 80 SPIGOT S/STEEL 35
12352 100 x100 SPIGOT S/STEEL 25
NOTES• Chrome plated grate• Adjust height by twis ng thread-ed adapter
ID OUTLET
12340 80 x 50 SPIGOT WHITE 25
12342 80 x 80 SPIGOT WHITE 35
12344 100 x100 SPIGOT WHITE 25
ID OUTLET
12341 80 x 50 SPIGOT CHROME 25
12343 80 x 80 SPIGOT CHROME 35
12345 100 x100 SPIGOT CHROME 25
GRATE
GRATE
GRATE
GRATE GRATE
www.plastec.com.auH.18
THREADED FLANGE SYSTEMS
ROUND SURFACE MOUNTED
SQUARE SURFACE MOUNTED
ID
15943 100 x 50BSP CHROME 25
ID
15945 100 x 50BSP CHROME 25
MICRO FLOOR WASTE TRAP TWIST TOP
NOTES• In built trap is accessible through grate for cleaning purposes once installed• Removable 75mm water tap
ID GRATE
17073 100 x 100 ROUND CHROME 25
17269 100 x 100 SQUARE CHROME 25
RELATED PRODUCTS• Maxi Adaptor can be purchased separately pg H.6 - 17071 & 17271
GRATE
GRATE
GRATE
H.19H.19DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
TWIST TOP ACCESSORIES
STAINLESS STEEL TILE KIT
NOTES• Tile template supplied ID
12491 100 SOLID S/S 50
SUD SAVER
ID
12511 100 130
ADAPTOR EXTENSION
ID
12492 80 130
12493 100 70
www.plastec.com.auH.20
KITS ONLY
SURFACE MOUNTED RRJ ADJUSTABLE OUTLET
ID OUTLET
12230 80 x 50 SPIGOT 50
12231 80 x 80 SPIGOT 25
12233 100 x 80 SPIGOT 35
12232 100 x100 SPIGOT 30
SURFACE MOUNTED SOLVENT WELD OUTLET
ID OUTLET
12234 80 x 50 SPIGOT 24
12235 80 x 80 SPIGOT 40
12237 100 x 80 SPIGOT 20
12238 100 x100 SPIGOT 26
RECESSED RRJ ADJUSTABLE OUTLET
ID OUTLET
12240 80 x 50 SPIGOT 25
12241 80 x 80 SPIGOT 50
12242 100 x100 SPIGOT 25
RECESSED SOLVENT WELD OUTLET
SURFACE MOUNTED THREADED FLANGE SYSTEM
NOTES - Kit only, no grates supplied
ID OUTLET
12246 100 x 50 SOCKET 25
ID OUTLET
14613 100 x 50BSP SPIGOT 25
ID OUTLET
12244 80 x 50 SPIGOT 30
12245 80 x 80 SPIGOT 35
12247 100 x 80 SPIGOT 30
12248 100 x100 SPIGOT 25
iFLOOR FLANGES & VALVES
FLOOR FLANGES...I.1TRITEC VALVES...I.2
TEST PLUGS...I.2
I.1I.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ID
17433 40 WHITE 5 220
17434 40 CHROME 5 100
RAISED SHOULDER
ID SUIT
12050 40 DWV 20 200
12051 50 DWV 20 140
17929 65 DWV N/A 120
15160 100 DWV N/A 184
17527 150 DWV N/A 90
ID SUIT
15101 65 DWV 340
15102 80 DWV 250
15100 100 DWV 170
15105 150 DWV 40
ID SUIT
16730 40 DWV 20 500
16731 50 DWV 20 500
TAPERED FLOOR
FLAT
NOTES• All sizes are ABS and can be solvent welded
NOTES• Low profi le design
FLOOR FLANGES
RELATED PRODUCTS• 90mm Stormwater versions available pg D.10 -15161
RELATED PRODUCTS• 90mm Stormwater versions available pg D.10 -15103
RAISED COVER LOW
COMBO SPINDLE SEAL
ID
13155 N/A GREEN 100 1000
ID
17469 50 CHROME TBA
17461 40 CHROME TBA
RAISED COVER HIGH
www.plastec.com.auI.2
TRITEC VALVES
MALE 1/4 TURN SOLID BRASS
NOTES• Ideal for undersink connec on of fl ick mixer and dishwasher• 1/4 turn isola on handle• Contains non return valve in 3/4” connec on
ID DIA 1 DIA 2 INLET
13003 1/2” BSP 3/4” BSP 1/2” BSP MI CHROME 10 100
FEMALE 1/4 TURN SOLID BRASS
NOTES• Ideal for undersink connec on of fl ick mixer and dishwasher• 1/4 turn isola on handle• Contains non return valve in 3/4” connec on
ID DIA 1 DIA 2 INLET
13004 1/2” BSP 3/4” BSP 1/2” BSP FI CHROME 10 100
TEST PLUGS
DUO MALE & FEMALE
NOTES• Duo plug and cap combina on for tes ng hot and cold water installa ons• One product does both plug and cap test
ID MALE FEMALE
13140 5/8” BSP 1/2” BSP 50 600
TEST CAP NO MESS
NOTES• Measurements are in inches• Small removeable plug for easy draining of water line
ID FEMALE
16416 1/2” BSP 20 200
CHROME TO SUIT CHROME ABS PIPE
NOTES• Fits neatly over chrome pipe• Stainless steel
ID
16712 40 50 400 RELATED PRODUCTS• Chrome pipe available for separate purchase pg J.9
jTRAPS & ACCESSORIES
TRAPS...J.140MM...J.1
40MM TELESCOPIC...J.350MM...J.4
50MM TELESCOPIC...J.6DOUBLE BOWL SINK CONNECTORS...J.6
LAUNDRY BY-PASS KITS...J.6EXTENSIONS...J.7
TRAP KITS...J.9TRAP ACCESSORES...J.9
COVER PLATES...J.10
MICROTRAPS...J.11
BOTTLE TRAPS..J.13
J.1J.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
TRAPSTRAPS & ACCESSORIES
40MM
S&P TRAP
NOTES• Approved for installa ons up to 60 degrees celcius• 20mm overfl ow connec on needs to be drilled out if required
ID
14849 40 WHITE 50
ID
15878 40 65
ID
14838 32/40 45
S&P SHORT TRAP
NOTES• Approved for installa ons up to 60 degrees celcius
40/32MM S&P TRAP
NOTES• Approved for installa ons up to 60 degrees celcius• 40/32mm reducer included• 20mm overfl ow connec on needs to be drilled out if required
ID
17471 40 CHROME 47
RELATED PRODUCTS• Chrome pipe available for separate purchase pg J.9 • Chrome Trap 17471 also available for purchase as a kit pg j.9 - 17633
www.plastec.com.auJ.2
ID
15099 40 48
SNAKE TRAP
NOTES• Approved for installa ons up to 60 degrees celcius• Ideal for pedestal installa ons• Inline trap• Removable cap for cleaning and access
P TRAP STANDARD
NOTES• Approved for installa ons up to 60 degrees celcius• 20mm overfl ow connec on needs to be drilled out if required
P TRAP SHORT LEG
NOTES• Approved for installa ons up to 60 degrees celcius
S TRAP STANDARD
NOTES• Approved for installa ons up to 60 degrees celcius
ID
15600 40 68
ID
14954 40 72
ID
15093 40 50
J.3J.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
S TRAP SHORT LEG
NOTES• Approved for installa ons up to 60 degrees celcius
ID
15736 40 26
40MM TELESCOPIC
S&P TELESCOPIC TRAP
NOTES• Approved for installa ons up to 60 degrees celcius• Eliminates the need for trap extensions• Height adjestment of 75mm
S&P TELESCOPIC TRAP WITH OVERFLOW
NOTES• Approved for installa ons up to 60 degrees celcius• Overfl ow connec on needs to be drilled out if required
ID
15939 40 36
ID
15866 40 36
www.plastec.com.auJ.4
50MM
S&P SHORT TRAP
NOTES• Approved for installa ons up to 60 degrees celcius
P TRAP STANDARD
NOTES• Approved for installa ons up to 60 degrees celcius• Double 20mm overfl ow connec on point
S&P TRAP
NOTES• Approved for installa ons up to 60 degrees celcius• Double 20mm overfl ow connec on for w/machine, fridge, coff ee machine etc.
ID
15075 50 WHITE 27
ID
15879 50 32
ID MATERIAL
15092 50 PP 30
ID
17472 50 CHROME 25
RELATED PRODUCTS• Chrome pipe available for separate purchase pg J.9 • Chrome Trap 17471 also available for purchase as a kit pg J.9 - 17634
J.5J.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
P TRAP SHORT LEG
NOTES• Approved for installa ons up to 60 degrees celcius
ID
14840 50 33
S TRAP STANDARD
NOTES• Approved for installa ons up to 60 degrees celcius
ID
15094 50 30
S TRAP SHORT LEG
NOTES• Approved for installa ons up to 60 degrees celcius
ID
15737 50 12
www.plastec.com.auJ.6
S&P TELESCOPIC TRAP WITH OVERFLOW
NOTES• Approved for installa ons up to 60 degrees celcius, Single overfl ow connec on point.
ID
16630 50 24
50MM TELESCOPIC
DOUBLE BOWL SINK CONNECTORS
WASTE DISPOSAL SINK KIT
NOTES• Length is total length of bracket arm• Can be cut to length• Complete with three overfl ow connec on points
DOUBLE BOWL SINK KIT
NOTES• All sizes come with an overfl ow connec on• Overall length is from centre of both inlets• Can be cut to length
ID
15541 50 BSP 310 22
14841 50 BSP 450 20
ID
15104 50 BSP 350 30
14834 50 BSP 400 24
14835 50 BSP 600 20
LAUNDRY BY-PASS KIT
LAUNDRY BY PASS KIT
ID
15281 50 BSP 50
J.7J.7DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
EXTENSIONS
40 X 25MM
50 X 25MM
NOTES• Sealing ring supplied
50 X 40MM
NOTES• Sealing ring supplied
50 X 60MM
NOTES• Sealing ring supplied
ID
15074 40 BSP 25 180
ID
14920 50 BSP 25 120
ID
15250 50 BSP 40 77
ID
15251 50 BSP 60 60
ID
15252 50 BSP 60 45
50 X 60MM OVERFLOW
NOTES• Sealing ring supplied• Double overfl ow connec on
ADAPTOR 32 40MM
NOTES• Ideal for reducing a trap to suit 32mm basin waste
ID
11795 32-40 PLASTIC 50 550
NUT
www.plastec.com.auJ.8
100MM SOLVENT WELD
NOTES• Can be cut to desired length
200MM SOLVENT WELD
NOTES• Can be cut to desired length
ID
11981 40 BSP 100 PLASTIC 120
11982 50 BSP 100 PLASTIC 84
ID
11984 40 BSP 100 BRASS 42
11985 50 BSP 100 BRASS 30
ID
11987 40 BSP 200 PLASTIC 67
11988 50 BSP 200 PLASTIC 43
ID
11990 40 BSP 200 BRASS 25
11991 50 BSP 200 BRASS 16
ID
17386 40 BSP 100 95
WASTE CONNECTOR WITH DISHWASHER INLET
NUT NUT
NUT NUT
J.9J.9DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
TRAP ACCESSORIES
PIPE
ID
16699 40 x 450 CHROME 32
17466 50 x 450 CHROME 42
17426 40 x 750 CHROME 60
17467 50 x 750 CHROME 45
17331 40 x 1200 WHITE 40
17332 50 x 1200 WHITE 36
TRAPS KITS
CHROME KIT 40MM S&P COMBINATION TRAP
ID
17633 40 1
NOTESIncluded:• 1 x 17471 40mm S&P Combina on Trap (pg J.1) • 1 x 17461 40mm Raised Cover Flange (pg I.1)• 1 x 17426 40mm Chrome Pipe 750mm (pg J.9)
CHROME KIT 50MM S&P COMBINATION TRAP
ID
17634 50 1
NOTESIncluded:• 1 x 17472 50mm S&P Combina on Trap (pg J.4) • 1 x 17469 50mm Raised Cover Flange (pg I.1)• 1 x 17467 50mm Chrome Pipe 750mm (pg J.9)
RELATED PRODUCTSOther chrome products also available for sepa-rate purchase:• 40mm S&P Combina on Trap pg J.1 - 17474• 50mm S&P Combina on Trap pg J.4 - 17472• Raised Cover Floor Flange (low) pg I.1 - 17433 & 17434• Raised Cover Floor Flange (high) pg I.1 - 17469 & 17461• 40mm PushTec Bend pg J.9 - 17437
www.plastec.com.auJ.10
COVER PLATES
FLAT PLASTIC
FLAT STAINLESS STEEL
NOTES• Protec ve cover supplied
RAISED STAINLESS STEEL
NOTES• In type, R = raised• Protec ve cover supplied
ID SUIT
12025 12 COPPER 100 1500
12027 19 COPPER 100 1500
12026 16 PEX 100 1500
12028 20 PEX 100 1500
12029 22 PB 1/2” BSP 100 1500
ID SUIT TYPE
12060 12 COPPER FLAT 40 1000
12061 20 COPPER FLAT 40 1000
ID SUIT TYPE
12070 12 COPPER 10mm 20 1000
12071 20 COPPER 10mm 20 1000
12076 20 COPPER 21mm 10 500
ADHESIVE COVER PLATE
NOTES• Self adhesive
ID TYPE
15744 40 PIPE WHITE OFFSET OVAL 10 800
15745 50 PIPE WHITE OFFSET OVAL 10 800
15746 SHEET WHITE 290X210MM 5 140
17402 40 SOCKET WHITE ROUND 10 900
17404 40 PIPE WHITE ROUND 10 1000
17401 50 SOCKET WHITE ROUND 10 900
17403 50 PIPE WHITE ROUND 10 1000
17405 65 PIPE WHITE ROUND 10 880
17407 65 PIPE WHITE OFFSET OVAL 10 430
17406 100 PIPE WHITE ROUND 10 400
17501 15 PIPE WHITE ROUND 10 1400
17502 20 PIPE WHITE ROUND 10 1200
17503 1/2” BSP WHITE ROUND 10 1200
17504 3/4” BSP WHITE ROUND 10 1200
ID SUIT
12034 65 DWV 200
12030 80 DWV 200
12031 100 DWV 125
J.11J.11DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
MICRO TRAPSTRAPS & ACCESSORIES
MICRO TRAPS
CHROME GRATE PVC PLUG WHITE BODY
NOTES• Ideal for disabled basins• Suitable for all basins with internal overfl ows• Suitable for most 32mm and 40mm basins
ID
15572 40 x 40 WHITE 20
CHROME GRATE PVC PLUG CHROME BODY
NOTES• Ideal for disabled basins• Suitable for all basins with internal overfl ows• Suitable for most 32mm and 40mm basins• Chrome body ideal for exposed installa ons
ID
15916 40 x 40 CHROME 20
POP UP WHITE BODY
NOTES• Suitable for all basins with internal overfl ows• Suitable for most 32mm and 40mm basins
ID
15171 40 x 40 WHITE 20
BODY
BODY
BODY
www.plastec.com.auJ.12
POP UP CHROME BODY
NOTES• Ideal for disabled basins• Suitable for all basins with internal overfl ows• Suitable for most 32mm and 40mm basins• Chrome body ideal for exposed installa ons
ID
15917 40 x 40 CHROME 20
LOOSE NUT C/L NUT WHITE BODY
NOTES• Ideal for disabled basins• Suitable for all basins with internal overfl ows• Suitable for most 32mm and 40mm basins
ID
15168 40 x 40 WHITE 26
COMPLETE SHOWER TRAP
ID
17410 80 x 50 CHROME BRASS 15
17412 80 x 50 CHROME PLASTIC 30
NOTES• Outlet can be mechanical nut or solvent weld
BODY
BODY
GRATE
J.13J.13DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
BOTTLE TRAPSTRAPS & ACCESSORIES
BOTTLE TRAPS
PLUG & WASTE
ID
17423 40 WHITE 18
LOOSE NUT
ID
17425 40 WHITE 18
POP UP
ID
17454 40 WHITE 18
BODY
BODY
BODY
www.plastec.com.auJ.14
kSPARE PARTS
WASTES...K.1GRATES...K.1
PAN COLLAR RUBBERS...K.2BOLTED TRAP LIDS...K.2
ECOVENT REPLACEMENT CARBON CANISTER...K.3FLEXI PIPE...K.3
FLEX-PAN INLET SEALS...K.3BATH WASTE CONNECTOR SPARES KIT...K.4
VINYL FLOOR WASTE GRATES...K.4TOILET RUBBERS...K.5
FLUSH PIPE/REDUCER...K.5
K.1K.1DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
BRASS
ID FIXING
13860 40 CHROME 5mm 2 60
13863 40 WHITE 5mm TBA
11728 50 CHROME 5mm 4 80
15565 40 CHROME 6mm 2 100
15566 50 CHROME 6mm 4 80
BRASS POP UP ASSEMBLY
ID
14790 40 CHROME 100
BRASS SHOWER 80MM
NOTES• Screws are not supplied• Suit 5mm screw
ID
13868 80 WHITE 9 72
ID
13866 80 CHROME 9 72
WASTES
BRASS TWO PIECE SHOWER 80MM
ID TOPDIA
BOTTOMDIA
15136 100 82 CHROME 40
GRATE
GRATEGRATE
GRATE
GRATES
www.plastec.com.auK.2
PAN COLLAR RUBBERS
FLEXI PAN OUTLET SEAL DWV
FLEXI PAN OUTLET SEAL HDPE/COPPER
NOTES• Suits HDPE pipe and copper tube
ID SUIT
11515 100 DWV 108
14600 80 DWV/HDPE 100
ID SUIT
14903 100 HDPE/Cu 48
BRASS SPARE LID
NOTES• Brass and plas c lids are interchangeable• Product has 6 screw holes
ID
11705 100 BRASS 30
15208 150 BRASS 10
ID
11708 100 CHROME 30
PLASTIC SPARE LID
NOTES• Brass and plas c lids are interchangeable ID
11704 100 PLASTIC 64
15207 150 PLASTIC 20
BOLTED TRAP LIDS
K.3K.3DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
ECO VENT REPLACEMENT CARBON CANISTER
ID SUIT
15073 ECO-VENT 30
FLEXI PIPE
ID HOSE
14921 30 1.2m 50
15139 40 1m 50
FLEX PAN INLET SEAL
ID TYPE
11516 STANDARD 120
RELATED PRODUCTS• 11516 Suits all Plastec Pan Connectors pg B.1 (excluding 11621) • 14493 uits 0-40mm Off set Seal - Solvent Weld Pan Connector pg B.4 - 11621
ID TYPE
14493 # TBA
ECO VENT REPLACEMENT CARBON CANISTER
FLEXI PIPE
FLEX-PAN INLET SEALS
www.plastec.com.auK.4
BATH WASTE CONNECTOR SPARE KITS
BATH WASTE CONNECTOR SPARES KIT
ID HOSE
17229 40 CHROME 36
17486 50 CHROME 36
FLUSH PIPE CONE
NOTES• Connec on between fl ushpipe and pan• Non skirted ID
11635 50 150 RELATED PRODUCTS• Flush Pipes pg B.8
SHOWER WASTE CONNECTOR SPARES KIT
ID INLET BOTTOMOUTLET GRATE
17438 80 SPARES KIT CHROME 8
SOLID COVER SUIT VINYL FLOOR WASTE
NOTES• Includes both lid and surround
OPEN GRATE SUIT VINYL FLOOR WASTE
ID GRATE
14597 80 CHROME 3 48
15288 100 CHROME 25
ID GRATE
14598 80 CHROME 3
15289 100 CHROME 30
16723 100 CHROME NON SLIP
3 18
VINYL FLOOR WASTE GRATES
TOILET RUBBERS
K.5K.5DIAMETER FASTENING BAG QTY CARTON QTY FINISH/COLOUR MEASUREMENT MM
REDUCER 50X40MM
ID
11724 50x40 150
KEY SEAL RUBBER
FLUSH PIPE
ID
16868 50 72
NOTES• Length = 357mm
FLUSH PIPE/REDUCER
ID
11640 50 500
OVERFLOW ASSEMBLY
BRASS OVERFLOW ASSEMBLY
NOTES• 1.2m fl exible tube length supplied• To accommodate baths which have been pre-drilled for an overfl ow connec on
ID TUBE
15140 30 1.2m CHROME 20
RELATED PRODUCTS• Flexible tube can be purchased separately pg K.3 - 15139