http://www.michaelfox.com email: info@michaelfox.comNORTH AMERICAN OFFICES: CALIFORNIA, CANADA, FLORIDA, ILLINOIS, MARYLAND,

NEBRASKA, NEW YORK, OREGON, PENNSYLVANIA, TEXAS, WASHINGTONADDITIONAL OFFICES WORLDWIDEA

UC

TIO

N

ROBERT D. SHERMAN, PA LIC. #AU-002566-L; LOUIS J. GOLDBERG PA LIC. #AU-004067

METALWORKINGEQUIPMENT -

CNC MACHINE TOOLS

PLANT MOVING - EVERYTHING MUST BE SOLD!

4” GIDDINGS & LEWIS CNC Table Top Horizontal BoringMill, Mdl. G40TX, S/N 450-302-92 (1992)

6” GIDDINGS & LEWIS Floor TypeHorizontal Boring Mill, Mdl. H6F,S/N 425-105-78 (1978)

SHARNOA CNC Vertical Machining Center,Mdl. SDC80, 34” X 85” Table, 25-PositionTool Changer

READCOMANUFACTURING, INC.

901 S. Richland AvenueYork, Pennsylvania 17405

TUESDAY, MARCH 30 AT

10:00 A.M. (EST)

5” GIDDINGS & LEWIS Table Type Horizontal Boring Mill,Mdl. 350T, S/N 150-148-56 (1958)

< N E WCARPO Mdl. HTE36 221 152Metal Separator,S/N 327-99

49” X 212” AXELSON Geared Head Engine Lathe, Mdl. 60/49

BORING MILLS4" GIDDINGS & LEWIS CNC Table Type Horizontal Boring Mill, S/N 450-302-92, Mdl. G40TX, 36" X 50" Table, Travels: 48" X, 55" Y, 58" W, 30" Z, G & LNumeripath 8000B Quick Path CNC Control, 20-Station Tool Changer, InfinitelyVariable Spindle Speeds Up To 3000 RPM Thru 3 Gear Ranges, 30" Square RotaryTable, G & L S/N 040-2107-S2, Manual Rotate And Airlift With 4 T-Slots, Cat 50 Taper,20 HP Main Motor, New 1992

6" GIDDINGS & LEWIS Floor Type Horizontal Boring Mill, S/N 425-105-78, Mdl. H6F, Travels: 240" X, 120" Y, 46" Z, Spindle Speeds 5.6 To 1013 RPM, #50Spindle Taper With Power Draw Bar, 3" Diameter Ball Screw For Vertical Travel, 40HP Main Motor, Feed Rates Up To 120 IPM, (1) 23" Long G&L Spindle Support S/N20-1180-78, G & L Motor Drives, 22' Long Chip Conveyor, Pendant Control WithUpgraded Electrical Readouts For Axis Movements, Joystick Controls, DRO, (2) 148"Long Base Sections, New 1978

5" GIDDINGS & LEWIS Table Type Horizontal Boring Mill, S/N 150-148-56, Mdl. 350T, 48" X 74" Table With 6 T-Slots, 65" Table Travel, 64" Vertical Travel,Outboard Support, 3-Axis Digital Readout With Teledyne Gurley Pathfinder 50 3-AxisDisplay, Spindle Speeds 7.5 To 975 RPM, Standard Range Up To 467 RPM, HighRange 480 To 975 RPM, Spindle Taper #6 Morse, Quick Change Tool Holder For 2-1/2" Diameter Straight Shank Holders, 1-Piece Base - Coolant Pump & Tank, 3/4 HP,Warren Spindle Motor Brake, 25 HP Main Motor, Overall Size 98" L-R X 215" F-B X145" High; Optionally Available For Additional Cost #6 Morse Taper Boring Heads

MACHINING CENTERSSHARNOA CNC Vertical Machining Center, S/N 18701005, Mdl. SDC80With Tigre 4 CNC Air Condition Control, 34" X 84-1/2" Table With 7 T-Slots, 20-Position Tool Changer, 20" Troyke 4th Axis Rotary Table, S/N 3944-12, Mdl. NC-20A,Floor, Chip Conveyor, Travels 79.6” X 32” Y & 24" Z Axis Travel, Spindle Speeds UpTo 4000 RPM, 24" Swing Horizontal Or Vertical 4th Axis Indexer With Tailstock,RS232 Port, New 1987

CINCINNATI MILACRON Horizontal Machining Center, S/N 47423, Mdl.10HC-1500, 30" Rotary Table Sits On Main Table, 31" X 64" Main Table, 5 Table T-Slots, Acramatic 8D NC Control, S/N 51-EA8DG16B-0015, 30-Position Tool Changer,#50 Taper Style Tooling, Double Arm Style Tool Changer, New 1975

LATHES49" X 212" (17.6') AXELSON Geared Head Engine Lathe, Mdl. 60/49,Swing Over Bedways 61-3/4", Swing Over Cross Slide 51-1/4", (24) Spindle Speeds6 To 750 RPM, Threads 1 To 30 TPI, Feeds .005" To .351" Per Revolution, MicrometerCarriage Stop, Spindle Jog & Free Spin Modes, 36" Cushman 4-Jaw Chuck With 2-Piece Hard Reversible Top Jaws With Serrated Faces

20" X 96" MONARCH Tracer Lathe, S/N 40971, Mdl. 20CM, Swing 27-1/2",Center Distance 96", Equipped With Hydraulic Tracer With Fixed Angle Compound,Roller Steady Rest, Speeds 18 To 800 RPM, Coolant Pump & Piping, Overall Size 18'Long X 80" L-R X 73" High

HARDINGE AHC Super Precision Automatic Chucking Lathe, S/NAHC2605, New 1981, Mdl. AHC, Spindle Mount: 2-3/16"-10 Right Hand Male Thread,Spindle Internal Taper For 5-C Collet, (34) Pre-Selectable Spindle Speeds 125 To3000 RPM

24” X 72” CINCINNATI Universal NC Lathe, S/N 530443U-75-004, Mdl. 24”/ 13” X 72”, New 1975, Acramatic 5 NC Control Tailstock, Chip Conveyor, Slant BedConstruction, Rotational Turret, 4 Position Index Turret Mounted Under The Spindle, 15”3 Jaw Scroll Jaw Chuck, Tailstock Controls

3A WARNER & SWASEY Saddle Type Turret Lathe, S/N 1725738, Mdl. M3500,Swing 23”, Speeds 12 To 851 RPM, Hole In Spindle 6-3/4”, 21” 3-Jaw Power Chuck

4A WARNER & SWASEY Saddle Type Turret Lathe, S/N 739030W, Mdl.M1500, Swing 28”, Spindle Hole 9” (12) Speeds 8 To 182 RPM Under Glass, 24” 4-Jaw Independent Chuck, 24” 3-Jaw Chuck, Equipped With Cross Sliding Turret

#4 WARNER & SWASEY Ram Type Turret Lathe, S/N 1156710, Mdl. M1420,30 To 766 RPM, 2” Bar Capacity, Swing 18", 10” 4-Jaw Chuck, Coolant

GEAR48H GOULD & EBERHARDT Vertical Gear Hobber, S/N 5300A3, Mdl. 48H,32” Diameter Work Table, Max Height Under Upper Tailstock Approx 34”

FELLOWS Vertical Gear Shaper, S/N 25926, Mdl. 615A, 8” Diameter WorkTable, Change Gears & Arbors

2

A 10% BUYER’S PREMIUM APPLIES TO ALL PURCHASES

FOR MORE INFORMATION, VISIT OURWEBSITE AT www.michaelfox.com

42" KING VerticalBoring Mill, S/N, Lot 239-1766, 4-Jaw Chuck With TopJaws, 1 Ram Head, 1 TurretHead On Rail, Tilt Ram Rail,Turret Tilting Rail, 16 Speeds 3To 90 RPM, 44" MaximumSwing, 35" Under Rail, 20 HPMotor

6" GIDDINGS & LEWISTable Type HorizontalBoring Mill, S/N 8403, Mdl. 56 HighPower, 84" Vertical Travel,60" X 147" Table With 6 T-Slots, All Manual Controls,143" Spindle To OutboardSupport, 6" Spindle, #7 MorseTaper, Spindle Speeds 6 To300 RPM, Feeds .004" To.609" Per Revolution,Approximately 6' SpindleTravel, DRO, 25 HP

NEW

48H GOULD & EBERHARDT Vertical Gear Hobber, Mdl. 48H, S/N 5300A3

3A WARNER & SWASEY Saddle Type Turret Lathe, Mdl. 3500, S/N 1725738

HARDINGE AHC SuperPrecision Automatic ChuckingLathe w/ Air Chuck & Tooling, S/N AHC2605 (1981)

10 Ton Overhead Bridge Crane w/ Pendent Controls

GRINDERS10” X 72” NORTON Plain Cylindrical Grinder, S/N CTU-26431, Swing 10”Diameter, Accommodates Lengths Up To 72”, Wheel Size Approx 30” Diameter X 3”Thick, Hydraulic Table Feed, Hand Or Auto Cycle, Table Swivels For TaperGrinding, Head Equipped With Auto Infeed Plunge Grinding, 15 HP Motor, OverallSize 234” L-R X 81” F-B X 65” High

14" X 48" CINCINNATI Universal Cylindrical Grinder, S/N 3U4E1R-14,With Swing Down Internal Attachment, Tailstock Mounted Wheel Dresser, QuickActing Tailstock Quill

RADIAL DRILLS5' X 15" FOSDICK Radial Drill, S/N 13581, 40" X 65" X 18", Speeds 14 To1010 RPM, L-Base Section

4' X 11" MORRIS MOR Speed Radial Drill, S/N A1108, 32-1/2" X 54-1/2" X18-5/8", 12 Speeds 56 To 1500 RPM, #4 Morse Taper, Quick-Change Tool AdapterWith 13 Holders, 5 HP

FORKLIFTSHYSTER Propane Fork Lift, Mdl. Space Saver 50, 5,000 Lb. Capacity, SolidTire, 42" Long X 5" Wide Forks, 2-Stage Mast, LP Gas, Roll Cage

WELDERS & CUTTERSTHERMAL DYNAMICS Plasma Cutter, S/N E20568A185001D, Mdl. CM6030,Portable

LINDE Portable Track Type Flame Cutting Unit, Unit Has Steel Wheels ToRide In Track, 1 Torch Head, Tilts Back & Forth, Moves In & Out And Up & Down ViaRack Drive, Forward & Reverse, Dial Speed Settings, 1 Track Section 72" Long,Overall Size 26" X 18" X 18"

POWERPAK 300S Portable Plasma/Tig Welder, S/N R12003A181, WithMiller Digi Meter 600-Power Controller, Wired 480 Volts

DOALL Band Saw Blade Welder, S/N 290-766819, New 1976, Mdl. DBW-15,1/16" - 1" Capacity, Blade Shear, Band Width Selector, 24" X 24" X 48" Cart W/ Wheels

(5) Assorted LINCOLN, Etc. Welders

CRANES(42) Asst. Bridge & Monorail Cranes, 1 To 10 Ton Capacity, Top & Bottom Running, 16To 50 Ft. Widths, With Hoists (BUDGIT, ACCOLIFT, WRIGHT, SHEPARDNILES, AMER. ENG., YALE, COFFING)

(11) Asst. Floor & Wall Mounted Jib Cranes With Hoists, ½ To 2 Ton Capacity,(MIDGET KING, WRIGHT, BUDGIT, COFFING, ABELL-HOWELL, SHAWBOX, BEACON LINE)

MISCELLANEOUS (2) JOY 100 & 125 HP Air Compressors, BRIDGEPORT 1 HP Mill,DIARCO Rotary Bender, CAMMANN A515 Metal Disintegrator,MILWAUKEE #2 Universal Horizontal Mill, Polishers/Grinders,GREENERD Arbor Presses, 20 Ton H Frame Press, PECK STOWManual Pinch Slip Rolls, KALTENBACH Cold Saw, TELEDYNE READCOPower Turning Rolls (1992); Rotary And Welding Tables, Tool Holders,Angle Plates, Pedestal Fans, Hand Tools, Inspection Tooling, CClamps, Hoists, Work Tables, Assorted Parts, And Much Much More!!

3

SOME ITEMS SUBJECT TO PRIOR SALE

FIRST CLASS MAIL

POSTMASTER: Dated Material.Please Deliver Promptly.

PRESORTEDFirst Class Mail

U.S. Postage PAIDEugene, OregonPermit No. 305

MFI-6955

901 S. RICHLAND AVENUEYORK, PENNSYLVANIATUESDAY, MARCH 30 AT 11:00 A.M. (EST)

EXECUTIVE OFFICES:11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117

(410) 654-7500 (800) 722-3334 FAX (410) 654-5876

40 OFFICES IN 20 COUNTRIESGoIndustry · Michael Fox International · Henry Butcher International · Karner & Co · Appelboom

http://www.michaelfox.comemail: info@michaelfox.com

AUCTIONMETALWORKING EQUIPMENT - CNC MACHINE TOOLS

PLANT MOVING - EVERYTHING MUST BE SOLD!

FINANCE YOUR AUCTION PURCHASEConserve Your Cash and Increase Your Bidding Power

AuctionLease Provides M&E Financing With Approvals from $5,000 to $999,000

(800)438-1470 * Apply Online: www.AuctionLease.com"Buy What Appreciates, Lease What Depreciates" -

J. Paul Getty

EVER WONDER.....WHAT ARE MY ASSETS WORTH?

For a confidential appraisal of yourassets, please call (800) 722-3334!

INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED.

AIRPORT & TRANSPORTATIONThe area is served by the Harrisburg International Airport,approximately 33 miles north of the auction site.

DIRECTIONSFrom Harrisburg International Airport: Take PA-283 W to I-283 S toward I-76/Pennsylvania Turnpike. Merge onto I-76West/Pennsylvania Turnpike toward Pittsburgh (portions toll)for 5.2 miles. Merge onto I-83 S via exit #242 towardYork/Baltimore for17.8 miles. Take PA-181 N, exit #22,toward US-30/Manchester. Turn right onto N. George Street/I-83BR N/PA-181 N for .4 miles. Turn right onto ArsenalRoad/US-30 W for 2.2 miles. Take PA-74 ramp toward WestYork/Dover and turn left onto Carlisle Road/PA 74 for 1.2miles. Turn right onto Madison Avenue which becomes NRichland Avenue and go 1.1 miles to 901 S. Richland Ave.

TERMS OF SALENO WARRANTIES: Every item and lot in the "Auction" is sold: (a) "AS IS, WHEREIS, AND WITHOUT RECOURSE," and (b) with no warranties, guarantees orrepresentation of any kind or variety, whether expressed, implied or otherwise.PAYMENT: A 10% buyer's premium applies to the purchase price of all on-sitepurchases. A minimum deposit of 25% will be required in order to bid. Cashor certified funds required in full at the time and place of auction. Non-certifiedchecks will NOT be accepted unless accompanied by a valid bank letter ofguarantee, which must be in the following format: This bank guaranteespayment to Michael Fox International, Inc. from (name of customer) on account#_______ up to the amount of $ _____. This letter is valid for purchases at theauction held at Readco Manufacturing on March 30.

INSPECTIONMonday, March 29 from 10:00 A.M. to 4:00 P.M. or by appointment.

REMOVALALL equipment must be removed no later than Friday, April 9.

OVERNIGHT ACCOMMODATIONSHampton Inn............................................................................. (717) 840-1500Holiday Inn ............................................................................... (717) 846-9500Sheraton .................................................................................... (717) 846-4940NOTICE: ALL BIDDERS MUST COMPLY WITH THE ABOVE TERMS

OF SALE NO EXCEPTIONS.

AIRPORT

AUCTION SITE