planes irwin

15
IRWIN University Specialist Program IRWIN PLANES

Upload: sharon-samuel

Post on 19-Jan-2015

46 views

Category:

Technology


3 download

DESCRIPTION

Planes irwin - Importers & Distributors of professional tools & technical supply for hi-tech. Gutman Barzilai (1983) LTD company imports Professional Tools close to 70 years. The wide range of our products appeal to all consumers, including private institutions, productive enterprises, high-tech companies and all professionals. Wholesale sale is made and private clients. http://www.gbtools.co.il/

TRANSCRIPT

Page 1: Planes irwin

IRWIN University Specialist Program

IRWIN PLANES

Page 2: Planes irwin

IRWIN University Specialist Program

What are they used for?For removing excess material and applying

thefinal smooth finish to many jobs

They are used by Carpenters, Joiners, Builders &

Home Owners

IRWIN PLANES

Page 3: Planes irwin

IRWIN University Specialist Program

IRWIN PLANES

SP04

SP05

04

05

07

09 ½

060 ½

A151

A151R

778

Bench Planes

Block Planes

Rebate Plane

Spokeshaves

Page 4: Planes irwin

IRWIN University Specialist Program

THERE ARE BASICALLY THREE TYPES OF

BENCH PLANES

JACK PLANES SP4 – SP5 (THIS PLANE IS USED FOR ROUGHING

AND SQUARING TIMBER BEFORE THE FINISHED CUTS ARE APPLIED

OUR BUDGET PRICED PLANE.)

SMOOTHING PLANES 04 - 05 (THE MOST FREQUENTLY

PURCHASED PLANE USED FOR FINAL THE FINISHING OF TIMBER

HIGHER QUALITY PRODUCT.)

JOINTER PLANES 07 (THIS PLANE IS DESIGNED FOR PLANNING

UNEVENNESS ON LONG SURFACES PRIOR TO SMOOTHING

SPECIALISTS .)

BENCH PLANES

Page 5: Planes irwin

IRWIN University Specialist Program

Leaver Cap and screwPressed steel cap ironCarbon steel cutting ironLateral adjusting leaver

Plane frog or saddle for cutting ironCutting iron brass adjusting screw Handle & knob (Plastic / Wood)

Frog fine adjusting screwPlane mouth slot for waste removalCast iron base linished to 3 thou tolerance

IRWIN PLANES SPECIFICATIONS

Page 6: Planes irwin

IRWIN University Specialist Program

JACK PLANES SP4/SP5

For the initial preparation of rough timber the joiner would use this plane for bringing the timber down from a rough finish to a Reasonably working level our entry level plane.

SP4 9. 3/4” LENGTH 2” BLADE WIDTH

SP5 14” LENGTH 2” BLADE WIDTH

Page 7: Planes irwin

IRWIN University Specialist Program

SMOOTHING PLANES 04 / 05

The most frequently used plane this plane is a general purpose plane ideal for smooth finishing of timber a high quality product.

04 9. 3/4” LENGTH 2” BLADE WIDTH

05 14” LENGTH 2” BLADE WIDTH

Page 8: Planes irwin

IRWIN University Specialist Program

JOINTER PLANE 07

07 22” LENGTH 2. 3/8” BLADE WIDTH

JOINTER PLANEJointer planes are longer than smoothing planes. The extra length helps the plane to ”ride”on top of an uneven surface and gradually even these out, rather than following the unevenesses which a shorter plane has a tendecy to do.

Page 9: Planes irwin

IRWIN University Specialist Program

BLOCK PLANES

the cutting of end grain.Used by Cabinet Makers And Craftsmen

The block plane was originally designed for the planning of butchers chopping blocks.

But it is now used by the craftsmen and cabinet maker.

ARE USED FOR

Page 10: Planes irwin

IRWIN University Specialist Program

TWO TYPES OF BLOCK PLANE.

1. Low angled block plane.

2. Standard end grain block plane.

1. Low angled block planes are used for fine work on materials such as thin laminates and plastics, also ideal for chamfering on small scale work

2 Standard block planes are used for planning end grain in cabinet making.

Page 11: Planes irwin

IRWIN University Specialist Program

Pitched at 12 1/2 degrees - ideal for plastics and laminates. this plane has an adjustable mouth wide for coarse work or narrow for fine work

BLOCK PLANES 060.1/2

•A fully adjustable for depth of cut.

•Cutter blade held firmly in place by leaver cap.

•Machined on base and sides for accuracy.

•Adjustable mouth for coarse and fine work.

•Fine blade adjustment for accuracy of cut.

•Blade width 1 .5/8” –42mm

Page 12: Planes irwin

IRWIN University Specialist Program

BLOCK PLANE 09.1/2

•A fully adjustable for depth of cut.

•Cutter blade held firmly in place by leaver cap.

•Machined on base and sides for accuracy.

•Adjustable mouth for coarse and fine work.

•Lateral adjusting lever for cutting alignment.

•Blade width 1 .5/8” –42mm Pitched at 20 degrees a standard end grain plane with a cutting ironre-sharpening angle of 25° this plane also has an adjustable mouth wide for coarse work or narrow for fine work

Page 13: Planes irwin

IRWIN University Specialist Program

Designed to cut rebates up to 1.1/2” wide, the 778 is guided by an adjustment fence mounted on two steel guide rods for exact alignment.

These rods can be pushed through so that the fence can be used on either side.

REBATE PLANE 778

Page 14: Planes irwin

IRWIN University Specialist Program

Used for chamfering and shaping, flat

faced timber (A151) for convex

surfaces and round faced (A151R) for

concave surfaces.

SPOKESHAVES A151 / A151R

Page 15: Planes irwin

IRWIN University Specialist Program

FEATURES & BENEFITS

Bench Planes SP Range

Features BenefitsSolid Grey Iron construction Strong and Durable in use

Accurately machined components Give accuracy in cutting performance

Brass cutter adjusting wheel Stronger and will extend wear life

All parts replaceable Keeps cost down for the customer