plan b meshwork user guide v1

13
You have registered in the Connecting Investors to Plan B Meshwork. After Self Registration, your email validation is emailed to you, don’t forget to check your junk or SPAM email folders. The Meshwork connects you to People and to the most relevant Content. You can add Content to the meshwork to offer, buy, sell, give, receive or share with others. Content in this meshwork can have one of the following subject types: • Best Practice/Case Story • Challenge • Event • Fiscal Support/Subsidy • Initiative • Integral Costs • Investment Risks • Next step • Opportunity • Opportunity Investment • Opportunity Sponsorship • Positive Effects • Product/Service • Project/Group/Organization • Regulation • Report • Research • Solution/Idea System requirements To use the full features of the software you need Flash player. Most browsers have it installed. If you need to install it, you can find it here: http://www.adobe.com/products/flashplayer/ Supported web browsers are Firefox, Internet Explorer, Safari, Chrome and Opera (some version conditions apply). This is a BETA version of the meshwork site, so you can expect changes like addition of further user roles, places, interest areas etc. Meshwork URL: http://PlanB.global.gaiaspace.org/ V1.0

Upload: gaiasoft

Post on 29-Nov-2014

844 views

Category:

Business


6 download

DESCRIPTION

Quick User Guide for Plan B Meshwork

TRANSCRIPT

Page 1: Plan B  Meshwork  User  Guide V1

You have registered in the Connecting Investors to Plan B Meshwork.

After Self Registration, your email validation is emailed to you, don’t forget to check your junk or SPAM email folders.

The Meshwork connects you to People and to the most relevant Content. You can add Content to the meshwork to offer, buy, sell, give, receive or share with others.

Content in this meshwork can have one of the following subject types:

• Best Practice/Case Story• Challenge• Event• Fiscal Support/Subsidy• Initiative• Integral Costs • Investment Risks• Next step• Opportunity

• Opportunity Investment• Opportunity Sponsorship• Positive Effects• Product/Service• Project/Group/Organization• Regulation• Report • Research• Solution/Idea

System requirementsTo use the full features of the software you need Flash player. Most browsers have it installed. If you need to install it, you can find it here: http://www.adobe.com/products/flashplayer/Supported web browsers are Firefox, Internet Explorer, Safari, Chrome and Opera (some version conditions apply). This is a BETA version of the meshwork site, so you can expect changes like addition of further user roles, places, interest areas etc.

Meshwork URL:http://PlanB.global.gaiaspace.org/ V1.0

Page 2: Plan B  Meshwork  User  Guide V1

Change your password, display name and email address.

Enter your profile. Add a photo and your Places, Interest Areas, Sectors and Roles and the Brief description for display withmy picture field as a minimum.

In the Meshwork page, find People and Content matching Places, Interest Areas and Roles in the Meshwork.

In the Synchronicity page find people and content that match your profile and tags, the closer they are the more alignment!

Add Content to offer, receive, buy, sell or share products, projects, ideas, etc.

Finding your way around the system

The following pages provide some tips for finding your way around the On-line Meshwork.

To get value from the online meshwork:

Coming soon: In the Scorecard, track the conditions (more information about this later).

Page 3: Plan B  Meshwork  User  Guide V1

Log in Page

This is the landing page where you can either log in or register.

Enter your username or email address together with your password, then click the ‘Log in’ button.

Use the ‘Register Now’ button to enter your details, the system then emails a validation link that requires activating before you can use your account.

Log in Page

This is the landing page where you can either log in or register.

Enter your username or email address together with your password, then click the ‘Log in’ button.

Use the ‘Register Now’ button to enter your details, the system then emails a validation link that requires activating before you can use your account.

Page 4: Plan B  Meshwork  User  Guide V1

Step 1 : Change Your Password and Language settings

If you wish to change your password, name or email address – click on “Settings” button (in the button bar), you will see ‘Your name’, this is your ‘display’ name and is always shown near your photo – the little picture of you that everybody sees on the site. Use Account password to change your password. You can select a language in the Language settings. (Please note that there might be some parts of the site that have not yet been fully translated).

Once you have made changes, click the the ‘Save’ button at the bottom of the page.

Note ‘Your name’ is your display name which is separate from your login name. You created your login name when you registered.

Step 1 : Change Your Password and Language settings

If you wish to change your password, name or email address – click on “Settings” button (in the button bar), you will see ‘Your name’, this is your ‘display’ name and is always shown near your photo – the little picture of you that everybody sees on the site. Use Account password to change your password. You can select a language in the Language settings. (Please note that there might be some parts of the site that have not yet been fully translated).

Once you have made changes, click the the ‘Save’ button at the bottom of the page.

Note ‘Your name’ is your display name which is separate from your login name. You created your login name when you registered.

Page 5: Plan B  Meshwork  User  Guide V1

Step 2 : Update Your Profile and Your Photo

To update your profile click on your outline icon in the button bar and then click ‘Edit Details’ (to the right of your name). You see the profile fields and Meshwork Alignment checkboxes. Please select the relevant Places, Interest Areas, Sectors and Roles. (It is essential to select one or more boxes in each category so that you will appear in the meshwork so all members of the meshwork can find people and information). If you prefer to keep some information private, choose the ‘Private’ option from the drop-list below any data you enter.

After you have filled in your details click the ‘Save’ button at the top or bottom of the page to save your profile information.

Step 2 : Update Your Profile and Your Photo

To update your profile click on your outline icon in the button bar and then click ‘Edit Details’ (to the right of your name). You see the profile fields and Meshwork Alignment checkboxes. Please select the relevant Places, Interest Areas, Sectors and Roles. (It is essential to select one or more boxes in each category so that you will appear in the meshwork so all members of the meshwork can find people and information). If you prefer to keep some information private, choose the ‘Private’ option from the drop-list below any data you enter.

After you have filled in your details click the ‘Save’ button at the top or bottom of the page to save your profile information.

Page 6: Plan B  Meshwork  User  Guide V1

1. Browse – select your photo from your computer

2. Upload – uploads your selected photo from your computer

To add your photo click on the icon button, then ‘Edit Details’ (to the right of your name) then ‘Edit profile icon’ (in the left menu). Use the ‘Browse’ and ‘Upload’ buttons to have your photo displayed.

To add your photo click on the icon button, then ‘Edit Details’ (to the right of your name) then ‘Edit profile icon’ (in the left menu). Use the ‘Browse’ and ‘Upload’ buttons to have your photo displayed.

Page 7: Plan B  Meshwork  User  Guide V1

Step 3 : Find other People and Information Content in the Meshwork

Click on the ‘Meshwork’ icon in the button bar. You can select a Place, Interest Area and Sector to see the People or Content for your selections (remember to click the ‘Go’ button after changing them), hover your cursor over a picture or icon to get more information.

Click a radio button next to a Role to see the people in it. Use the Roles page and Results page controls to see all the information. To visit a person’s profile or to see content or files click on the picture or icon.

Your profile is what defines your place in the meshwork, so it’s important that the data is kept up-to-date and is accurate so people can find you (see ‘Your Profile and Your Photo’ section above).

Step 3 : Find other People and Information Content in the Meshwork

Click on the ‘Meshwork’ icon in the button bar. You can select a Place, Interest Area and Sector to see the People or Content for your selections (remember to click the ‘Go’ button after changing them), hover your cursor over a picture or icon to get more information.

Click a radio button next to a Role to see the people in it. Use the Roles page and Results page controls to see all the information. To visit a person’s profile or to see content or files click on the picture or icon.

Your profile is what defines your place in the meshwork, so it’s important that the data is kept up-to-date and is accurate so people can find you (see ‘Your Profile and Your Photo’ section above).

Click People

Page 8: Plan B  Meshwork  User  Guide V1

Click Content

Find Information Content in the Meshwork

You can select a Place, Interest Area and Sector to see the Content for your selections (remember to click the ‘Go’ button after changing them), hover your cursor over a picture or icon to get more information.

Click a radio button next to a Subject Type to see the information in it. Use the Subjects page and Results page controls to see all the information. For more details about the content or file click on the picture or icon.

Find Information Content in the Meshwork

You can select a Place, Interest Area and Sector to see the Content for your selections (remember to click the ‘Go’ button after changing them), hover your cursor over a picture or icon to get more information.

Click a radio button next to a Subject Type to see the information in it. Use the Subjects page and Results page controls to see all the information. For more details about the content or file click on the picture or icon.

Page 9: Plan B  Meshwork  User  Guide V1

Step 4: Explore Synchronicity

Click on the ‘Synchronicity’ icon in the button bar. This screen shows circles that represent both people and different types of information. The ones nearest to your photo are the People or/ Content that align the most with your place, interest area, sector and role (and also tags), they are the most similar to your profile. Hover your cursor over the circles to see the % alignment to the Person or Content (click on a circle to see more).

The blue circles signify people, the other colours are the different subject types of content and files, for example Case Story, Idea, Products, etc. Hover your cursor over a coloured button on the left to see the subject. You can select and deselect content types by clicking the check marks on the buttons.

Tip: If, when you have clicked on the ‘Synchronicity’ icon, the page is blank check that you have updated your profile - make sure you select at least one Place, Interest Area and Role as a minimum.

Step 4: Explore Synchronicity

Click on the ‘Synchronicity’ icon in the button bar. This screen shows circles that represent both people and different types of information. The ones nearest to your photo are the People or/ Content that align the most with your place, interest area, sector and role (and also tags), they are the most similar to your profile. Hover your cursor over the circles to see the % alignment to the Person or Content (click on a circle to see more).

The blue circles signify people, the other colours are the different subject types of content and files, for example Case Story, Idea, Products, etc. Hover your cursor over a coloured button on the left to see the subject. You can select and deselect content types by clicking the check marks on the buttons.

Tip: If, when you have clicked on the ‘Synchronicity’ icon, the page is blank check that you have updated your profile - make sure you select at least one Place, Interest Area and Role as a minimum.

Page 10: Plan B  Meshwork  User  Guide V1

Step 5 : Add Person as a Contact

There are two ways to do this: When viewing a person’s profile click on “Add to contacts” on the left. They will be added to your list of contacts.

Step 5 : Add Person as a Contact

There are two ways to do this: When viewing a person’s profile click on “Add to contacts” on the left. They will be added to your list of contacts.

On your Home Page in “Meshwork Members” or other places in this meshwork where you find an icon of a person - hover your cursor over a person’s icon and a little down arrow appears in the right lower corner; click on it and then on the drop down menu. Click “Add contact” - this adds the person to your list of contacts.

On your Home Page in “Meshwork Members” or other places in this meshwork where you find an icon of a person - hover your cursor over a person’s icon and a little down arrow appears in the right lower corner; click on it and then on the drop down menu. Click “Add contact” - this adds the person to your list of contacts.

If you want to go directly to your contacts, hover your cursor over the “Tools” icon and select “Contacts”.If you want to go directly to your contacts, hover your cursor over the “Tools” icon and select “Contacts”.

Page 11: Plan B  Meshwork  User  Guide V1

Step 6 : Add ContentSelect both ‘This is a …’ and ‘I want to …’ You must enter a Title, Microsummary, Key benefits and Content text so that your content is easily found in the meshwork. You can also add a relevant photo or image.After having entered your text and descriptive tags “Align Content with …Meshwork” by clicking the appropriate checkboxes.Before you publish your content set the “Access” to ‘Private’ if you want to keep it to yourself; to ‘Logged in users’ if you want other participants of this meshwork to be able to see it; or to ‘Public’ if you want any Internet user to be able to read your content. Click the ‘Save’ button at the bottom of the page.

Step 6 : Add ContentSelect both ‘This is a …’ and ‘I want to …’ You must enter a Title, Microsummary, Key benefits and Content text so that your content is easily found in the meshwork. You can also add a relevant photo or image.After having entered your text and descriptive tags “Align Content with …Meshwork” by clicking the appropriate checkboxes.Before you publish your content set the “Access” to ‘Private’ if you want to keep it to yourself; to ‘Logged in users’ if you want other participants of this meshwork to be able to see it; or to ‘Public’ if you want any Internet user to be able to read your content. Click the ‘Save’ button at the bottom of the page.

Page 12: Plan B  Meshwork  User  Guide V1

Step 7 : Content and Files

Hover your cursor over the “Tools” icon.

Select “Content” to publish information on opportunities, products, projects, etc. Content can include text (with or without pictures, illustrations, videos etc.)

Select “Files” to upload a file (PDF, presentation, document, or any other file type).

Select “Pages” if you want to work on text with others or publish a web page.

To publish content: See previous page, use button. To publish files: See next page.

Step 7 : Content and Files

Hover your cursor over the “Tools” icon.

Select “Content” to publish information on opportunities, products, projects, etc. Content can include text (with or without pictures, illustrations, videos etc.)

Select “Files” to upload a file (PDF, presentation, document, or any other file type).

Select “Pages” if you want to work on text with others or publish a web page.

To publish content: See previous page, use button. To publish files: See next page.

Page 13: Plan B  Meshwork  User  Guide V1

To publish a file: Select “Files” in the drop-down “Tools” menu and click on “Upload a file” on the left. Click on the “Choose File” button to select the file from your computer. Select the appropriate “This is a …” and ‘I want to …’ for the file.It is obligatory to enter a Title, Microsummary and Key Benefits so the file is easily found in the meshwork. After having entered descriptive tags and possibly a description with an abstract.“Align file with … Meshwork” by clicking the appropriate Places, Interest Areas etc. checkboxes.Before you upload set the “Access” (same as in Create Content) finally click ‘Save’ at the bottom of the page.

To publish a file: Select “Files” in the drop-down “Tools” menu and click on “Upload a file” on the left. Click on the “Choose File” button to select the file from your computer. Select the appropriate “This is a …” and ‘I want to …’ for the file.It is obligatory to enter a Title, Microsummary and Key Benefits so the file is easily found in the meshwork. After having entered descriptive tags and possibly a description with an abstract.“Align file with … Meshwork” by clicking the appropriate Places, Interest Areas etc. checkboxes.Before you upload set the “Access” (same as in Create Content) finally click ‘Save’ at the bottom of the page.