pioneer dvr 520 service manual

PIONEER CORPORATION 4-1, Meguro 1-chome,PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, LonPIONEER EUROPE NV Haven 1087, Keetberglaan 1, 912PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253

PIONEER CORPORATION 2004

PULL-OPEN

STANDBY/ONDVDHDD

OPEN/CLOSE REC ONE TOUCH COPY

DV IN/OUT

DVR-520H-S

Meguro-ku, Tokyo 153-8654, Japang Beach, CA 90801-1760, U.S.A.

0 Melsele, BelgiumAlexandra Road, #04-01, Singapore 159936

ORDER NO.

RRV2979

DVD RECORDER

DVR-520H-SDVR-720H-STHIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

Model Type Power Requirement Region No.Serial No.

Please confirm 3rd & 4th alphabetical letters.

DVR-520H-S WYXK AC220-240V 2 &&UK######$$

DVR-520H-S WYXU AC220-240V 2 &&PG######$$

DVR-520H-S WVXK AC220-240V 2 &&UK######$$

DVR-720H-S WYXK AC220-240V 2 &&UK######$$

DVR-720H-S WVXK AC220-240V 2 &&UK######$$

÷ When servicing this model, some service procedures may reset the settings that customer set (*) to the factory default settings. Make sure to explain this to the customer. (*) : Initial Setup (Clock Setting, Remote Control Set, Channel settings, Video Out settings, Audio In settings, Audio Out settings, Language settings) Refer to the chapter 13 of the Operating Instructions for more details.An HDD (Hard Disc Drive) is mounted in this product.The HDD is a precision instrument very vulnerable to shock and electrostatic charges. Please read "7.4 Cautions on Handling the HDD" in this manual and exercise sufficient caution when handling the HDD itself, as well as the product with the HDD built in.When an HDD becomes defective and inoperable, restoration of the user's data recorded on the HDD, or copying of the user's recorded data to other media (such as a new HDD) is totally impossible.Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.The user must be made aware that all recorded data are deleted if the HDD is intialized.

For details, refer to "Important symbols for good services" .

T-ZZV JUNE 2004 printed in Japan

C

D

F

A

B

E
1 2 3 4
SAFETY INFORMATION

WARNING!DEVICE INCLUDES LASER DIODE WHICHEMITS INVISIBLE INFRARED RADIATIONWHICH IS DANGEROUS TO EYES. THERE ISA WARNING SIGN ACCORDING TO PICTURE1 INSIDE THE DEVICE CLOSE TO THE LASERDIODE.

LASERPicture 1Warning sign forlaser radiation

LABEL CHECK

LASER DIODE CHARACTERISTICSMAXIMUM OUTPUT POWER : 70 mwWAVELENGTH : 658 nm

IMPORTANTTHIS PIONEER APPARATUS CONTAINSLASER OF CLASS 1.SERVICING OPERATION OF THE APPARATUSSHOULD BE DONE BY A SPECIALLYINSTRUCTED PERSON.

PULL-OPEN

STANDBY/ON

DVD

HDD

OPEN/CLOSE

RECONE TOUCH COPY

DV IN/OUT

Î

CLAMP signals for detecting the loading state are detectedby the drive CPUs, and the design prevents laser diodeoscillation when the CLAMP signal turns OFF.In normal operation, if no disc is clamped, the laser diodeoscillation is disabled.However, the interlock does not always operate in the testmode.

2. When the cover is opened, close viewing of the objectivelens with the naked eye will cause exposure to a Class 3Alaser beam.

Additional Laser Caution1. The ON/OFF(ON:low level,OFF:high level) status of the

DRW2194

DVR-520H-S21 2 3 4

C

D

F

A

B

E

3

5 6 7 8

[ Important symbols for good services ]In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.When you find the procedures bearing any of the symbols, be sure to fulfill them:

2. Adjustments

To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning

For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,proper cleaning should be performed to restore their performances.

5. Lubricants, glues, and replacement partsAppropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply theprescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used.

4. Shipping mode and shipping screws

To protect the product from damages or failures that may be caused during transit, the shipping mode should be set orthe shipping screws should be installed before shipping out in accordance with this manual, if necessary.

1. Product safety

You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S4

1 2 3 4

CONTENTS SAFETY INFORMATION..................................................................................................................................... 21. SPECIFICATIONS ............................................................................................................................................ 52. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8

2.1 PACKING ................................................................................................................................................... 82.2 EXTERIOR............................................................................................................................................... 102.3 FRONT PANEL ........................................................................................................................................ 12

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM.......................................................................................... 143.1.1 OVERALL BLOCK DIAGRAM............................................................................................................... 143.1.2 TUNB and JCKB ASSY BLOCK DIAGRAM.......................................................................................... 163.1.3 MAIN ASSY BLOCK DIAGRAM............................................................................................................ 183.1.4 POWER BLOCK DIAGRAM.................................................................................................................. 203.2 OVERALL WIRING DIAGRAM................................................................................................................. 223.3 TUNB ASSY............................................................................................................................................. 243.4 JCKB ASSY(1/3) ...................................................................................................................................... 263.5 JCKB(2/3), ATWB and ATHB ASSYS ...................................................................................................... 283.6 JCKB ASSY(3/3) ...................................................................................................................................... 303.7 MAIN ASSY(1/5) ...................................................................................................................................... 323.8 MAIN ASSY(2/5) ...................................................................................................................................... 343.9 MAIN ASSY(3/5) ...................................................................................................................................... 363.10 MAIN ASSY(4/5) .................................................................................................................................... 383.11 MAIN ASSY(5/5) .................................................................................................................................... 403.12 FLKY, KIRB, FRJB and DVJB ASSYS ................................................................................................... 423.13 SDEB ASSY........................................................................................................................................... 443.14 POWER SUPPLY UNIT.......................................................................................................................... 463.15 WAVE FORMS ....................................................................................................................................... 48

4. PCB CONNECTION DIAGRAM ..................................................................................................................... 514.1 TUNB ASSY............................................................................................................................................. 524.2 JCKB, ATWB and ATHB ASSYS.............................................................................................................. 544.3 MAIN ASSY ............................................................................................................................................. 584.4 FLKY, KIRB, FRJB and DVJB ASSYS ..................................................................................................... 624.5 SDEB ASSY............................................................................................................................................. 664.6 POWER SUPPLY UNIT............................................................................................................................ 68

5. PCB PARTS LIST ........................................................................................................................................... 696. ADJUSTMENT ............................................................................................................................................... 74

6.1 TUNB ASSY ADJUSTMENT.................................................................................................................... 746.2 MAIN ASSY ADJUSTMENT .................................................................................................................... 75

7. GENERAL INFORMATION............................................................................................................................. 767.1 DIAGNOSIS ............................................................................................................................................. 767.1.1 CPRM ID NUMBER AND DATA SETTING............................................................................................ 777.1.2 MODEL SETTING................................................................................................................................. 817.1.3 DOWNLOAD METHOD ........................................................................................................................ 827.1.4 SERVICE MODE................................................................................................................................... 847.1.5 DV DEBUG MODE................................................................................................................................ 967.1.6 ERROR RATE MEASUREMENT .......................................................................................................... 997.1.7 VIDEO ADJUSTMENT FOR SPECIFIC AREA................................................................................... 1017.1.8 AGING MODE..................................................................................................................................... 1057.1.9 SETUP SEQUENCE........................................................................................................................... 1077.1.10 DISASSEMBLY ................................................................................................................................. 1087.2 IC ........................................................................................................................................................... 1137.3 OUTLINE OF THE PRODUCT............................................................................................................... 1447.4 CAUTIONS ON HANDLING THE HDD.................................................................................................. 1477.5 DISC/CONTENT FORMAT .................................................................................................................... 1497.6 CLEANING............................................................................................................................................. 150

8. PANEL FACILITIES ...................................................................................................................................... 151

1 2 3 4

C

D

F

A

B

E

5

5 6 7 8

1. SPECIFICATIONSGeneralSystem. . . . . . . . . . . . . . . . . . HDD, DVD-Video, DVD-R/RW,

Video-CD, Super VCD, CD, CD-R/RW (WMA, MP3, JPEG, CD-DA)

Power requirements. . . . . . . . . . . . . . . 220–240 V, 50/60 HzPower consumption DVR-520H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 W DVR-720H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 WPower consumption in standby mode 0.68 W

(Front panel display: off)Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7 kgDimensions . . . . . . . . . . . . . 420 (W) x 59 (H) x 339 (D) mmOperating temperature . . . . . . . . . . . . . . . . . +5°C to +35°C Operating humidity . . . . . . . . . . . . . . . . . . . . . . . 5% to 85%

(no condensation)TV system. . . . . . . . . . . . . . . . . . . . . . . . . . . . PAL/SECAM/

NTSC (external input only)RecordingRecording format . . . . . . . . . . . . . . . DVD Video Recording

DVD-VIDEORecordable discsDVD-RW (DVD Re-recordable disc)DVD-R (DVD Recordable disc)

Video recording formatSampling frequency . . . . . . . . . . . . . . . . . . . . . . . . 13.5MHzCompression format. . . . . . . . . . . . . . . . . . . . . . . . . . MPEGAudio recording formatSampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 48kHzCompression format . . . . . . . . . Dolby Digital or Linear PCM

(uncompressed)Recording time

HDD DVR-720H / DVR-520HFine (FINE). . . . . . . . . . . . . . . . . . . . . Approx. 34 / 17 hoursStandard Play (SP) . . . . . . . . . . . . . . Approx. 68 / 34 hoursLong Play (LP). . . . . . . . . . . . . . . . . Approx. 136 / 68 hoursExtended Play (EP) . . . . . . . . . . . . Approx. 204 / 102 hoursManual Mode (MN) . . . . . . Approx. 34–204 / 17–102 hours

DVD-R/DVD-RWFine (FINE). . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 1 hourStandard Play (SP) . . . . . . . . . . . . . . . . . . . .Approx. 2 hoursLong Play (LP). . . . . . . . . . . . . . . . . . . . . . Approx. 4 hoursExtended Play (EP) . . . . . . . . . . . . . . . . . . Approx. 6 hoursManual Mode (MN) . . . . . . . . . . . . . . . . Approx. 1–6 hours

TunerReceivable channels

TimerPrograms . . . . . . . . . . . . . . . . . . . . . . 1 month/32 programsClock. . . . . . . . . . . . . . .Quartz lock (24-hour digital display)Power off memory . . . . Approx. 5 years (after manufacture)

Input/OutputVHF/UHF antenna input/output terminal . . . . VHF/UHF set

75 (IEC connector)Video input . . . . . . . . . . . . . . . . . . . . Input 1 (rear), 2 (front) Input level . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 ) Jacks . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1),

RCA jack (Input 2)Video output. . . . . . . . . . . . . . . . . . . . . . . . . . . AV1 Output Output level. . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 ) Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector 1 (AV1)

RCA jack (Output)S-Video input . . . . . . . . . . . . . . . . . . Input 1 (rear), 2 (front) Y (luminance) - Input level. . . . . . . . . . . . . . .1 Vp-p (75 ) C (colour) - Input level . . . . . . . . . . . . . . 286 mVp-p (75 ) Jacks . . . . . . . . . . . . . . . . . . . . . . .AV connector 2 (Input 1),

4 pin mini DIN (Input 2)S-Video output . . . . . . . . . . . . . . . . . . . . . . . . .AV1 / Output Y (luminance) - Output level . . . . . . . . . . . . . .1 Vp-p (75 ) C (colour) - Output level. . . . . . . . . . . . . . 286 mVp-p (75 ) Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector 1 (AV1),

4 pin mini DIN (Output)RGB input Input level . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 Vp-p (75 ) Jacks . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1)RGB output Output level. . . . . . . . . . . . . . . . . . . . . . . . .0.7 Vp-p (75 ) Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector 1 (AV1)

VHF (low)

VHF (high)

Hyper

UHF

VHF (low)

VHF (high)

Hyper

UHF

STEREO B/G - A2 I - NICAM L - NICAM B/G - NICAM D/K - NICAM

Channel

E2 - E4X - Z

E5 - E12S1 - S20M1 - M10U1 - U10

S21 - S41

E21 - E69

Frequency

47 - 89 MHz

104 - 300 MHz

302 - 470 MHz

470 - 862 MHz

Channel

A - CX - Z

D - J11, 13S1 - S20

S21 - S41

E21 - E69

Frequency

44 - 89 MHz

104 - 300 MHz

302 - 470 MHz

470 - 862 MHz

PAL B/G PAL I

Channel

2 - 4

5 - 10B - Q

S21 - S41

21 - 69

Frequency

49 - 65 MHz

104 - 300 MHz

300 - 470 MHz

470 - 862 MHz

Channel

R1 - R5

R6 - R12S1 - S20

S21 - S41

E21 - E69

Frequency

49 - 94 MHz

104 - 300 MHz

302 - 470 MHz

470 - 862 MHz

SECAM L SECAM D/K

Ω

Ω

Ω

ΩΩ

ΩΩ

Ω

Ω

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S6

1 2 3 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . .1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Audio input . . . . . . . . . . . . . . . . . Input 1 (rear), 2 (front) L/R Input level During audio input. . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms

(Input impedance: more than 22 k Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1),

RCA jacks (Input 2)Audio output . . . . . . . . . . . . . . . . . . . . . . . . . . .AV1 Output During audio output . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms

(Output impedance: less than 1.5 kΩ) Jacks . . . . . . . . . . . . . . . . . . . . . . . .AV connector 1 (AV1),

RCA jacks (Output)Control input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mini jack

DV input/output 4 pin (i.LINK/IEEE 1394 standard)

AV Connectors (21-pin connector assignment)AV connector input/output . . . . . . . . . . . . 21-pin connectorThis connector provides the video and audio signals for connection to a compatible colour TV or monitor.

PIN no. AV1(RGB)-TV / AV2(INPUT 1)1 . . . . . . . . . . . . . . . . . . . . . . Audio 2/R out / Audio 2/R out2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – / Audio 2/R in11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G out / G in3 . . . . . . . . . . . . . . . . . . . . . . . Audio 1/L out / Audio 1/L out6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – / Audio 1/L in15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R or C out / R or C in4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B out / B in19 . . . . . . . . . . . . . . . . . . . . . .Video out or Y out / Video out20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – / Video in or Y in8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND

Supplied accessoriesRemote controlDry cell batteries (AA/R6P)Audio / Video cable (red/white/yellow)RF antenna cablePower cableOperating InstructionsWarranty card

Note: The specifications and design of this product are subject to change without notice, due to improvement.

Accessories• Remote control ×1

(VXX2910 : WYXK/WYXU types) (VXX2933 : WVXK type)

• RF antenna cable(PAL) ×1(VDE1075)

• Power cable ×1(ADG1154 : WYXK/WYXU types)

• Audio / Video cable(1.5m) ×1(red/white/yellow)

(XDE3049 : WYXK/WVXK type)(VDE1077 : WYXU type)

• Dry cell batteries ×2(AA/R6P)

(ADG1156 : WVXK type)

DVD RECORDER

A

INPUTSELECT

ShowView

STANDBY/ON OPEN/CLOSE

0

TV/DVD

+

AUDIO SUBTITLE ANGLE PLAY MODE

ABC DEF

GHI JKL MNO

PQRS TUV WX

CLEAR CHANNEL

CLEAR

MENU

RETURN

DISC NAVIGAOR PL Y LIST

HOMEMENU

ENTER

PREV

•

PAUSE STOP OK SKIPCMBACK

REV SCAN PLAY FWD SCAN

CASESELECTION

REC

PREV NEX T STEP/SLOW

STOP REC REC MODE TIMER REC

DISCHISTORY

NAVIMARK

CHPMARK

EASYTIMER

INPUTSELECT

DISPLAYTV CONTROL

CHANNEL VOLUME

Ee

1 2 3 4

C

D

F

A

B

E

7

5 6 7 8

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S8

1 2 3 4

2. EXPLODED VIEWS AND PARTS LIST

2.1 PACKING

Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual.(In the case of no amount instructions, apply as you think it appropriate.)

NOTES:

13

14

15

7

16

20

21

23

22

16

4

6

2

5

18

3

1

13

1415

7 to 12(Operating Instructions)

17

for WV type

[for WV type][for WY type]

16

1

1 2 3 4

C

D

F

A

B

E

9

5 6 7 8

PACKING parts List

(2) CONTRAST TABLE DVR-520H-S/WYXK, WYXU, WVXK, DVR-720H-S/WYXK and WVXK are constructed the same except for the following :

Mark No. Description Part No.

> 1 Power Cable See Contrast table (2)

2 Audio / Video Cable See Contrast table (2)

3 RF Antenna Cable VDE1075

4 Remote Control See Contrast table (2)

5 Battery Cover AZA7424

NSP 6 Dry Cell Battery (R6P, AA) See Contrast table (2)

7 Operating Instructions See Contrast table (2)

(English)


(French)


(German)


(Italian)


(Dutch)


(Spanish)

NSP 13 HDD Caution 8L B VRR1046

NSP 14 HDD Caution 8L VRR1047

NSP 15 Warranty Card ARY7065

16 Polyethylene Bag VHL1051

17 Polyethylene Bag See Contrast table (2)

18 Mirror Sheet VHL1006

19 • • • • • • •

20 IM Holder See Contrast table (2)

21 Front Pad See Contrast table (2)

22 Rear Pad See Contrast table (2)

23 Packing Case See Contrast table (2)


Mark No. Symbol and Description DVR-520H-S

/WYXKDVR-520H-S

/WYXUDVR-520H-S

/WVXKDVR-720H-S

/WYXKDVR-720H-S

/WVXK

> 1 Power Cable ADG1154 ADG1154 ADG1156 ADG1154 ADG11562 Audio / Video Cable XDE3049 VDE1077 XDE3049 XDE3049 XDE30494 Remote Control VXX2910 VXX2910 VXX2933 VXX2910 VXX2933

NSP 6 Dry Cell Battery (R6P, AA) VEM1017 VEM1030 VEM1017 VEM1017 VEM10177 Operating Instructions VRB1339 VRB1339 VRB1340 VRB1339 VRB1340

(English)

8 Operating Instructions VRC1205 VRC1205 Not used VRC1205 Not used(French)

9 Operating Instructions VRC1206 VRC1206 Not used VRC1206 Not used(German)

10 Operating Instructions VRC1207 VRC1207 Not used VRC1207 Not used(Italian)

11 Operating Instructions VRC1208 VRC1208 Not used VRC1208 Not used(Dutch)

12 Operating Instructions VRC1209 VRC1209 Not used VRC1209 Not used(Spanish)

17 Polyethylene Bag AHG7097 AHG7097 Not used AHG7097 VHL1051

20 IM Holder VHC1117 VHC1115 VHC1117 VHC1117 VHC111721 Front Pad VHA1370 VHA1364 VHA1370 VHA1370 VHA137022 Rear Pad VHA1371 VHA1365 VHA1371 VHA1371 VHA137123 Packing Case VHG2517 VHG2554 VHG2520 VHG2546 VHG2547

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S10

1 2 3 4

2.2 EXTERIOR

L

L

G

F

O

I

IJ

J

B

H

H

A

AK

C

CF

D

E

GD E

B

O

K G

CO

NT

AC

T S

IDE

NO

N-C

ON

TA

CT

S

IDE

L L

CK

F

J

HI

B

A

63

41

67

6565

6565

6765

68

68

68

68

68

68

68

6827

9

49

2037

68

68 6868

68

68

3

13

16

18

17

43

8

23

68

66

212624

22

13

14

11

6 53

66

4268

68

61

15

48 28

68

68

7

68

68

68

44

69

68

6868

68

68

25

38

64

64

47

40

4060

60

60

46

60

51

40 10

53

2

1

2960

32

3019

40

33

35

38

36

6212

52

4

31

54

56

(520H type)

(720H type) 55

Refer to"2.3 FRONT PANEL SECTION".

5

50

Lithium Battery(CR2032)

5557

58

69

60

60

68

6834

39

45

68

59

Component of Base chassis assy

Component of Base chassis assy

1 2 3 4

C

D

F

A

B

E

11

5 6 7 8

EXTERIOR parts List



1 TUNB Assy VWV2003

2 JCKB Assy VWV2024

3 MAIN Assy VWV2013

4 FRJB Assy VWV2004

5 DVJB Assy VWV2006

6 ATWB Assy VWV2005

7 ATHB Assy VWV2002

8 SDEB Assy VWV2033

> 9 POWER SUPPLY Unit VWR1381

10 DRIVE Assy R7 (for Service) VXX2942

11 HDD See Contrast table (2)

12 DC Fan Motor VXM1114

13 Ferrite Core ATX1048

14 Ferrite Core VTH1050

15 Connector Assy (15P) PF15PP-D47

16 Flexible Cable (8P) VDA1997






22 Shield Flexible Cable (40P) VDA2031


24 Housing Assy (4P) VKP2327



NSP 27 P. Plate Holder PNY-405

28 Earth Plate TU VBK1153

29 Rubber Foot VEB1349

30 Radiation Sheet VEB1360

31 Rubber Spacer VEB1370

NSP 32 PC Support VEC1749

33 Heatsink Cushion VEC2363

34 Gasket Sheet VEC2394

35 Spacer VEC2413

NSP 36 Clamp VEC2418

37 FFC Protector VEC2436

38 Gasket 75 x 7T VEC2439

39 Gasket Sheet 2 VEC2440

40 Aluminum Tape VEF1056

41 Rear Panel See Contrast table (2)

42 Bonnet Case S See Contrast table (2)

NSP 43 Base Chassis See Contrast table (2)

NSP 44 HDD Stay VNE2334

NSP 45 Bonnet Angle VNE2335

NSP 46 Writer Stay L VNE2336

NSP 47 Writer Stay R VNE2337

NSP 48 Tuner Stay VNE2338

NSP 49 PCB Base VNE2339

NSP 50 Heatsink VNH1070

51 SYPS Cover VNK5426

52 Fan Duct VNK5427

NSP 53 Binder (BK-1) ZCA-BK1

54 HDD Badge See Contrast table (2)

55 Tray Sheet See Contrast table (2)

56 Tray Panel See Contrast table (2)

57 Tray Panel Base See Contrast table (2)

58 Tray Panel Lens See Contrast table (2)

59 Hologram Label See Contrast table (2)

NSP 60 Tape ZTA-156A-19

61 Bonnet Label See Contrast table (2)

62 Screw BPZ30P250FTC

63 Screw PBZ30P080FTC

64 Screw AMZ30P060FTC

65 Screw BBZ30P040FTC

66 Screw BCZ40P060FNI


68 Screw BBZ30P060FTC

69 #6-32 Screw DBA1125



/WYXKDVR-520H-S

/WYXUDVR-520H-S

/WVXKDVR-720H-S

/WYXKDVR-720H-S

/WVXK

11 HDD 80G 4R080L0 SV VXF1010 VXF1010 VXF1010 Not used Not used11 HDD 160G 4R160L0 SV Not used Not used Not used VXF1028 VXF102841 Rear Panel VNA2691 VNA2696 VNA2691 VNA2735 VNA273542 Bonnet Case S VXX2938 VXX2925 VXX2938 VXX2938 VXX2938

NSP 43 Base Chassis VNB1042 Not used VNB1042 VNB1042 VNB1042

NSP 43 Base Chassis Assy Not used VXA2681 Not used Not used Not used54 HDD Badge VAM1141 VAM1141 VAM1141 Not used Not used55 Tray Sheet B VEC2450 VEC2409 VEC2450 Not used Not used55 Tray Sheet Not used Not used Not used VEC2448 VEC244856 Tray Panel VNK5520 VNK5421 VNK5520 Not used Not used

57 Tray Panel Base Not used Not used Not used VNK5432 VNK543258 Tray Panel Lens Not used Not used Not used VNK5433 VNK543359 Hologram Label Not used Not used Not used VRW2147 VRW214761 Bonnet Label VRW2115 VRW2115 VRW2123 VRW2124 VRW2125

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S12

1 2 3 4

2.3 FRONT PANEL

CO

NT

AC

T S

IDE

NO

N-C

ON

TA

CT

S

IDE

D

E

3

2

4

21

6

5

13

11

16

17 1

26

26

19

24

2012

26

25

8

7

26

26

14

9

DVR-520H-SOnly

DVR-520H-SOnly

DVR-720H-SOnly

10

Note:When replacing the jack door, first fully open it. If the jack door is not fully open during replacement, it may unexpectedly fall out after being replaced.

(*) No.5, No.24 : These parts are included in the Front Panel Assy for WYXU type, and not included in the Front Panel Assy for WYXK and WVXK types.

(*)

(*)

22

1823

15

1 2 3 4

C

D

F

A

B

E

13

5 6 7 8

FRONT PANEL parts List



1 FLKY Assy VWG2489

2 KIRB Assy VWG2521



5 Pioneer Name Plate See Contrast table (2)

6 Rubber Foot VEB1349

7 Drive Sheet VEC2345

8 FL Filter VEC2421

9 Panel Sheet See Contrast table (2)

NSP 10 FL Lens See Contrast table (2)

11 Front Panel Assy See Contrast table (2)

12 Door Spring See Contrast table (2)

NSP 13 Front Panel See Contrast table (2)

14 Jack Door See Contrast table (2)

NSP 15 Main Key See Contrast table (2)

NSP 16 Copy Ring See Contrast table (2)

NSP 17 REC Ring See Contrast table (2)

NSP 18 Power Key See Contrast table (2)

NSP 19 IR Window See Contrast table (2)

NSP 20 Sub Panel See Contrast table (2)

NSP 21 DV Cover See Contrast table (2)

NSP 22 Key Base See Contrast table (2)

NSP 23 Cap See Contrast table (2)

NSP 24 Mirror Sheet VHL1082

25 Screw See Contrast table (2)




/WYXKDVR-520H-S

/WYXUDVR-520H-S

/WVXKDVR-720H-S

/WYXKDVR-720H-S

/WVXK

5 Pioneer Mame Plate VAM1146 VAM1146 VAM1146 VAM1124 VAM11249 Panel Sheet VEC2446 VEC2446 VEC2446 Not used Not used

NSP 10 FL Lens Not used VNK5486 Not used Not used Not usedNSP 10 FL Lens 2 VNK5517 Not used VNK5517 VNK5612 VNK5612

11 Front Panel Assy VXA2661 VXA2651 VXA2662 VXA2673 VXA2674

12 Door Spring VBK1152 VBK1151 VBK1152 VBK1152 VBK1152NSP 13 Front Panel VNK5501 VNK5491 VNK5501 VNK5616 VNK5616

14 Jack Door VNK5503 VNK5496 VNK5502 VNK5503 VNK5502NSP 15 Main Key VNK5504 VNK5420 VNK5504 VNK5504 VNK5504NSP 16 Copy Ring VNK5505 VNK5523 VNK5505 VNK5505 VNK5505

NSP 17 REC Ring VNK5506 VNK5425 VNK5506 VNK5506 VNK5506NSP 18 Power Key VNK5509 VNK5480 VNK5509 VNK5509 VNK5509NSP 19 IR Window VNK5511 VNK5423 VNK5511 Not used Not usedNSP 20 Sub Panel VNK5514 VNK5483 VNK5514 Not used Not usedNSP 20 Sub Panel 2 Not used Not used Not used VNK5615 VNK5615

NSP 21 DV Cover VNK5518 VNK5451 VNK5518 VNK5518 VNK5518NSP 22 Key Base VNK5534 Not used VNK5534 VNK5534 VNK5534NSP 22 Main Key Not used VNK5436 Not used Not used Not usedNSP 23 Cap VNK5535 VNK5437 VNK5535 VNK5535 VNK5535

25 Screw BPZ30P080FNI BPZ30P080FTC BPZ30P080FNI BPZ30P080FNI BPZ30P080FNI

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S14

1 2 3 4

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM3.1 BLOCK DIAGRAM3.1.1 OVERALL BLOCK DIAGRAM

SPDLMOTOR

LDDRIVE

Pickup

LOADINGMOTOR

STEPPIONGMOTOR

U/V TUNERU301 VXF1023ANT

INPUT2

VIDEO

Y/C

L

R

(15P)CN1301

(19P)CN300

(19P)CN401

(15P)CN402

(15P)CN403

(15P)CN705

FRJBASSY

JCKB ASSY(1/3)

JCKB ASSY(2/3)

C

F

TUNBASSYA

SDEBASSYG

MAIN ASSY

DRIVE ASSYM

6 8

12

4

8

IF11

Y

C

SIF

L

SIF

SIF

LIN2

LIN4

LIN1

L

RF INRFOUT

Y/CVBS

2V

U/V

SCVY

CR in

SCVY

2Y

Y In

AV2 R/C In

2C

CB in

AV2 V/Y IN

C/CB

CR

Video SelectorVideo Driver

SCARTInterface

RGBInterface

IC701LA73033(1/2)

IC601LC75342M

IC501LA73026AV

(1/2)

IC803TA1287FG

IC801

IC805

13

5

11

14

17

27

23

13

11

75

79

1

7

3

9

LPF

1 ChipSysytem Codec

Audio Selector with Electirc ATT

JA1302

JA1301

JA502

JA501

VIN2

YIN2

CIN2

LIN2

PICKUPASSY

M

(40P)

[ATAPI]

DV

D-V

RD

VD

-Vid

eo DVD-VRDVD-Video

CD Digital

CD Digital

CN4401

1

CN201(2P)

CN703 (2P)

CN101(45P)

8L In

L In

R/C In

G In

B In

V/Y In

V/Y In

CN501

CN502

(12P)

33

39

A

B

C

D

S4

S3

S2

S1

5

4

3

2

1/3B

2/3BPB DVD/CD

IC1001M65673WG

IC201UPD63630GM

IC501 BD7907FS

IC101UPC3330GC

RF IC

IC301M30700FKLGP

IC202

SDRAM16Mbit

7-1013-16

(40P)

(21P)(21P)

CN702(1/2)

DSP

48

37

40

36

38

34

35

: Recording system signal route : Playback system signal route

AV2

AV1

U/V19

LPF

IC1401 ATA SDRAM256Mbit

CPU SDRAM128Mbit

IC1102 IC1101

Flash64Mbit

2

13 13

17 3

15 1

10 6

11 9

WriterCPU

25

6CHDriver

2

201

76CN3001(1/2)

IC302TDA9818TS

VIF/SIFIC

Trap

Trap

Trap

SyncSep

ClampPulse

PIFSAW

SIFSAW

AFCAGC

StereoDecoderMSP3417G

IC401

16

12

27

2

12

2324

2

6

15

10

39

5

6

2

1 2

2 5

4

7

8

13

14

15

18

28

23

16

36

HDD[ATA]

(40P)CN4501

IC1103

SRAM4MbitIC1421 ×2

CN401

1 2 3 4

C

D

F

A

B

E

15

5 6 7 8

D FLKY ASSY

E KIRB ASSY

I

L

ControlData

SEL Y/CVBS

Y/CVBS

SEL C/CB

SEL CR

C/CB

CR

IC1301

IC3201PCM1742KE

IC1001 PT6315

V1001

IC3101AK5357VT

IC3301SM5950AM

IC5101UPD72852AGB-8EU

IEEE1394Physical IC

IC5202UPD72893BGD-LML

IEEE1394Link IC

AudioA/D 2

SEL.L

VOUT

(19P)CN201

(19P)CN1001

DVJB ASSY

YOUT

COUT

LOUT

(32P)CN701(1/2)

9

7

C/CB IN

CR IN

CVBS IN

CN1401(7P)

CN5102(7P)

JA1401

(32P)

(21P) (21P)

CN2001(2/2)

(32P)

CN701(2/2)

CN702(2/2)

38 39 37 36

1,3 2 6 7

XT

PA

TP

A

TP

B

XT

PB

XT

PB

TP

B

XT

PA

TP

A

1,3 2 6 7

1 2 3 4

AudioD/A Conv.

FL Driver

FL KeySW

IC701LA73033(2/2)

Sampling RateConverter

7

C

Y

G

R

B

C OUT

Y OUT

G OUT

B OUT

R OUT

27

29

25

23

21

CN3001(2/2)

27

29

25

23

21

L OUT17 17

SPDIF1 1

3

21

IC3251-1/2UPC4570G2

G

G Out

G In

V/Y Out

V Out

B

B Out

B In

L Out

L Out

R/C

R/C Out

R/C In

Y

C

V

Tuner U-com

JA651

OPTICALAC-3/PCMDIGITALAUDIOOUT

JA700

YC

VIDEO

L

R

• R ch is same as L ch.

DV TERMINAL

LINEOUT 2

AV2

AV1

(32P)CN2001

9

5

7

11 11

Master Clock Freerun

48KHz 20Bit

JCKB ASSY(3/3)3/3B

ENCSDRAM128Mbit

IC1201

DECSDRAM64Mbit

IC5204DV SDRAM

16Mbit

51

45

53

43

41

58

60

56

63

65

68

IC202PEG035B

TunerU-com

IC204BR24L32F-W

EEPROM

IC203RS5C372A

RealTimeClock

5

91012

1-3

F5D2

AE24AG25

AD21AF23

AG24

T26

R26

V27

• MPEG2 PS Encode• AC-3/Linear PCM Audio Encode• 2ch ATA/ATAPI Interface• MPEG2 PS Decode• AC-3/MPEG1/Linear PCM Audio Decode

JA502

JA501

SCARTInterface

Y/CMix

IC501LA73026AV

(2/2)

25

26

42

30

7

13

2

11

IC8084

26

IC8074

26

4

6

IC8064

2

2

6

IC806

IC503

61

7

Video SelectorVideo Driver

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S16

1 2 3 4

3.1.2 TUNB and JCKB ASSY BLOCK DIAGRAM

TUON<u-com>

EVOLCLKEVOLDATAEVOLCE

LC75342M

SCART Interface

IC702Audio SelectorwithElectric A.T.T

Audio Input Circuit

Output Circuit

Video Input Circuit

SDET2 <u-com>

LAMUTERAMUTE<MAIN>

LAMUTERAMUTE<MAIN>

(Discrete)

R

L

R

L

Comp

C

Y

V

C

C

Y

C

Y

Y

Muting

(Discrete)

Muting

OUT

JA1301

JA502

JA1302

IN2(Front)

IN1

AV2

JA501

AV1

V/Y In

V

Y

C

S

L In

G In

B In

R/C In

R In

L In

R In

L Out

V Out

R Out

L Out

R Out

L

R

JA700

IC701LA73033M

Video Selector&

Video Driver(2/2)

IC701LA73033M

Video Selector&

Video Driver(1/2)

<u-com>

SCLSDA

YVSELSWSTBY

<u-com>

R

GG

BB

RR

R/CR/C Out

L

V/YU/V

C/CB

SYNC

Sync-Sepa

LPF

LPF

LPF

27

25

CR23

36

19

51

53

5

45

60

BB Out 56

G

U/V Out

G Out 58

18

42

36

37

V/Y Out

V/Y In

25

23

43

13

7

1,10

2,11

63

65

68

41

43

26

39

30

26

16

15

31

40

14

15

13

5

TUNB ASSY (VWV2003)A

JCKB ASSY (VWV2024)B

SDEB ASSY (VWV2033)

G

FR

JB A

SS

Y

(VW

V20

04)

F

CN

1301

CN

705

CN

402

CN401CN300

CN

403

41012 2

68

86

122

JA651OpticalOUT

4 10

1154

17

21

3

67

10

15

12

91516

3

1819

17

1096

1

4

SYNCAFT<u-com>

SYNC<u-com>

IC801

Clamp Pulse

Pulse Shape

IC805

Q702

4L/4R <from SDEB ASSY>

4R

AGCSCLSDA

SCLSDA

SCLSDA

AFT

AGC

AFT

4LL

SCL

AV2_R/C In

AV2_B In

AV2_G In

YCbCr

R

SCR

SCVY

SDASCL

SIF

4R4L

U301

V/U Tuner ModuleVXF 1023-

SCLSDA

AGC

TUON+32VReg.

+6VSW.

+5VRipple Filter

IC302TDA9818TS

VIF/SIFIC

IC803TA1287FG

RGBInterface

IC806MM1501XNVideo SW


IC503MM1511XNY/C Mix

IC502TC7W53FUVideo SW


IF

AGC

AGC

Trap Trap

PIFSAW

SIFSAW

16

26

272

12

17

111,2

23,24

SIF

UV OUT

U/V OUT

AFCAGC

SCLSDA

StereoDecoderMSP3417G

IC401

Q401,Q405-Q406

15kHz LPF

IC501LA73026AV

(1/2)

SCART Interface

IC501LA73026AV

(2/2)

1 2 3 4

C

D

F

A

B

E

17

5 6 7 8

FL DriverPT6315

Front Keys

IR Detector

FAN Driver FAN

EEPROM Battery

CeramicResonator

EVOLCLKEVOLDATAEVOLCE

SPDIF

PCMOUT

PCMOUT

LAMUTE

RAMUTE

FLKY ASSY(VWG2489)

KIRB ASSY

(VWG2521)

SELIR

KEY1, KEY2, KEY3

FLCK, FLDATA, FLSTB

IC202

CN

1001

CN

201

Tuner/FL Control U-com

PEG035B-K

XINTRA

SCL

XIN, XOUT

XRESETIN

SDA

Other Devices

SCLEEP

SDAEEPBR24L32F-W

IC203Real-TimeClockRS5C372A

U-com I/F

Y

9

10

11

12

13

14

15

3

4

5

6

7

8

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

C

G

B

R

R

L

SELC/CB

CN702< from/to MAIN >

CN703< from DRIVE >

SELV/Y

SELCR

SELR

SELL

1

13

161718

22

24

23

2

D

ESYNCAFT<Q702>

IC1001

Q102,Q104

IC204 BT201

X201

Reset ICPST3265

IC201

IC1201

S1201-S1203S1001-S1009

SR In

JA200

FL Display

V1001

SYNC<IC701>

TUON

ASCKSST to MSSM to TSISHST to MHSM to TSYSXRESET

<CN401 Pin15>

<CN401 Pin19> AGC

<IC702>

SCLSDASWSTBY

<IC701>

SDET2<JA601>

< to/from MAIN >CN701

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S18

1 2 3 4

3.1.3 MAIN ASSY BLOCK DIAGRAM

To Writer

To JCKB ASSY

To JCKB ASSY

IC14

01A

TA S

DR

AM

CN

4401

ATA

BU

S

IC1102

FLASH

IC1301

IC2031

IC2302

IC2211

ENCSDRAM

MT48LC4M32B2TG-7

K4S

5616

32E

-TC

75

IC1201DEC

SDRAM

W986416DH-6

VYW2176

DCLK0

ECLK0

CD D.OUT

D.OUT

ACC

PEDCTL

RGB_H

AGC

IC3201PCM1742KE

DAC

IC3101

A/DAK5357VT

AD

CC

LKO

IC34

03

AUDIO LR OUT

AUDIO LR IN

VIDEO Y,C,Yp,Cb,Cr OUT

IC3251

Cb IN

C IN

V/Y IN

Cr IN

CN

2001

CN

3001

TO TUNER u-COM

CN1901

SE

RIA

LIC1001

M65673WG

1 Chip System Codec

• MPEG2 PS Encode• AC-3/Linear PCM Audio Encode• 2ch ATA/ATAPI Interface• MPEG2 PS Decode• AC-3/MPEG1/Linear PCM Audio Decode

MAIN ASSY(VWV2013)

C

ARCLK0

To H.D.D

IC14

21A

TA S

DR

AMCN

4501

K4S

5616

32D

-TC

75

IC1103

CY62148VLL-70ZI

Backup SRAM

1 2 3 4

C

D

F

A

B

E

19

5 6 7 8

HOST BUS

DV

IC1101CPU SDRAM

IC5202

UPD72893BGD-LMLUPD72852AGB-8EU

LINK/DV CODEC

IC5101Phy

CN

5102IC5204

DV SDRAM

K4S281632E-TC75 K4S161622D-TC80

MCLK

VCLKI

SCLK

HCLK0

IC33

01S

RC

SRC**O

SRC**I

IC4205

TC7WHU04FU

SM

5950

AM

Play Mster clockIC4206

AMCLK2

IC3402

PLL IC

27M

24M

VMCLKI

AMCLK1

33M

36M

33/36M

X4102

VSS1195

VCXOInput Mster

clock

AD

MC

LKI 27M

IC4101

DV

PLL

CK

(AD

MC

LKI)

DV

VP

WM

IC5341

DVVCLKO

SM8707KV

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S20

1 2 3 4

3.1.4 POWER BLOCK DIAGRAM

LIVE

FLDC (–)

AC IN

F1

NEUTRAL

1

2

3

4

5

7

9

11

13

3

4

5

7

9

11

13

FLDC (+)

FL–28V

EV+37V V+37E

EV+6V

SW+13V

SW+6V

15 15EV+15V

SW+12V1

4

1

SW+5VDRIVE ASSYR7R

DC FANMOTORCN101

CN203(4P)

CN201(15P)

SW+6V

V+

13F

AN

CN105(2P)

2

4

6

7

8

V+6SW

V+13SW

Q102

Q101Q100

Q103

SW+2.5V

SW+4V

SW+4V

SW+4V

SW+6V

SW+2.5V

SW+4V

SW+4V

SW+4V

CN202(8P)

2

4

6

7

8

CN4001(8P)

PO

WE

R S

UP

PLY

UN

IT

FLKY ASSYD

TUNB ASSYA

JCKB ASSYB

MAIN ASSYC

CN104(15P)

V–28VVEE 1

2

3

14

18

19

18

17

6

V+

5VO

V+

5VI

V+

13S

W

CN701(32P)

CN2001(32P)

32

32

V+

5VO

CN702(24P)

CN3001(24P)

21 23

21 23

V+

5VI

V+

13S

W

CN301(19P)

13 118 14

7 9

V+

6E

V+

37E

FLDC –

FLDC +

NC

V+5EV+5E

CN1001(19P)

CN201(19P)

V+6E V+13SW V+6SW

V+15E

IC1015V REG.

V+6E

V+5MV+5E

IC1023.3V REG.

V1001FL TUBE

IC1001FL Driver

V+6E

V+6SW

V+15E

V+6E

V+3_3E

V+5VO

V+13V

V+4V

V+4V

V+6V

V+2R5V

V+5VO

Q4000

V+12A

V+5VI

V+5RP

Q106

V+12SC

IC1039V REG.

V+13SW

V+9

1

1

6

3

1 3

Q108Q107

V+6E

V+5SC

30

V+

37E

V+

6E

V+

6SW

V+

9

CN401(19P)

CN402(15P)

V+37EV+6E

SDEB ASSYG

2 8

V+

6SW

V+

9

V+9V+6SW

V+5A IC40045V REG.

5 1

V+6V

V+5D IC40065V REG.

5 1

V+3DIC40023.3V REG.

1 3

V+3D

V+2R5IC50022.5V REG.

7 1

V+2R5V

V+PRAIC40081.2V REG.

1 3

V+4V

V+3VIC40073.3V REG.

5 4

2

SW+12V

SW+5V

CN204(4P)

HDD1

4

J R7

1 2 3 4

C

D

F

A

B

E

21

5 6 7 8

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S22

1 2 3 4

3.2 OVERALL WIRING DIAGRAM

ADG1154 : WYXK, WYXUADG1156 : WVXK

DVJB ASSY(VWV2006)

ATHB ASSY(VWV2002)

K

POWERSUPPLYUNIT(VWR1381)

J

I

TUNB ASSY (VWV2003)ASDEB ASSY (VWV2033)

G

MAIN ASSY (VWV2013)

C 1/5 - C 5/5C

JCKB ASSY (VWV2024)

B 1/3 - B 3/3B

1 2 3 4

C

D

F

A

B

E

23

5 6 7 8

DRIVE ASSY(R7)(VXX2942)

÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".

÷ The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.

÷ : The power supply is shown with the marked box.

VNF1129-

ATWB ASSY(VWV2005)H

KIRB ASSY(VWG2521)E

FLKY ASSY(VWG2489)D FRJB ASSY

(VWV2004)F

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S24

1 2 3 4

3.3 TUNB ASSY

A

(IF

)(I

F)

(IF

)

(T)

(PIF)

(PIF)

(T)

(SIF)

(SIF)

(SIF)

1 2 3 4

C

D

F

A

B

E

25

5 6 7 8

CN401

A

TUNB ASSY (VWV2003)A

CN300

B 2/3

: Video Signal Route (TUNER)(T)

(T)

(T)

: PIF Signal Route (TUNER)(PIF)

: IF Signal Route (TUNER)(IF)

: SIF Signal Route (TUNER)(SIF)

(SIF) (SIF)

(SIF)

LOGIC :

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S26

1 2 3 4

3.4 JCKB ASSY(1/3)

CN104

B 1/3

B 3/3

B 3/3

CN

201

J

to FAN

1 2 3 4

C

D

F

A

B

E

27

5 6 7 8

CN201

(Flash : PEG035*8–k)

(Mask : PEG035* –k)

B 1/3

B 1/3 JCKB ASSY (VWV2024)

B 3/3B 3/3

CN

1001

D

B 3/3

B2/3

B2/3 B

2/3,3/

3

B3/3

B3/3 B3/3

B3/3

B 3/3

TUFL U-COM

EEPROMRTC

Lithium Battery

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S28

1 2 3 4

3.5 JCKB(2/3), ATWB and ATHB ASSYS

B 2/3


CN300ACN403G

B 1/3

B 1/3 B 3/3

B 3/3B 1/3

B 1/3

B 1/3

B 1/3,3/3

CN402

CN401

Sync Sep.

RGBInterface

29

2

1

30

31

: Video Signal Route (Y)

: Video Signal Route (B): Video Signal Route (G)

(Y)

(G)

(B)

(R): Video Signal Route (R): Video Signal Route (TUNER)

(T)

(R)

(R)

(R)

(G)

(G)

(G)

(B)

(B)

(B)

(B)

(B)

(G)

(G)

(R)

(R) (C

R)

(CB

)

(Y)

(T)

: Video Signal Route (CR)

: Audio Signal Route (L ch)

(CR): Video Signal Route (CB)

(CB)

1 2 3 4

C

D

F

A

B

E

29

5 6 7 8

B 2/3

CN4501to HDD

to DRIVE ASSY R7

C 4/5

CN4401C 4/5

IH

ATHB ASSY (VWV2002)I

ATWB ASSY (VWV2005)H

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S30

1 2 3 4

3.6 JCKB ASSY(3/3)

JA502

CN705

CN703

CN702

SLAMUTE

LAMUTE

XRESET

P-CONT

I-B5

1u Y

B

1u Y

B

B 3/3


CN1301

CN3001

F

B 1/3

B 1/3

B 1/3

B 1/3

B 2/3

B 1/3

B 1/3

B1/3

B1/3

B 1/3

B 1/3

B 1/3,2/3

B 1/3,2/3

C 3/4

fromDRIVE ASSY(R7R)

SC

AR

T

CO

NN

EC

TO

R-1

19

2023

21

22

32

317

16

(R)

(R)

(G)

(B)

(G)

(B)

(Y)

(C)

(Y)

(C)

(D)

(D)

1 2 3 4

C

D

F

A

B

E

31

5 6 7 8

JA501C

N70

1

JA700

B 3/3

B 1/3B 1/3

B 1/3

B1/3

B 1/3

B 2/3

CN2001C 2/4

Video Selector&

Video Driver

SCART CONNECTOR-2

15

18

14131211 28

65

4 7

9 810

24 25

26 27

33


: Video Signal Route (B): Video Signal Route (G)

(Y)

(G)

(B)

(R): Video Signal Route (R): Video Signal Route (TUNER)

(T)

: Video Signal Route (CR)

(Y)

(Y)

(R)

(G)

(R)

(R)

(Y)

(T)

(C)

(CB)

(CR)

(R)

(Y)(C)

(R)

(G)

(C/CB)

(CR

)

(B) (R)(C)(Y)

(R)

(G)

(G)

(B)

(B)

(B)

(B)(G

)

(G)

(B)

(C)

(C)


(CR): Video Signal Route (CB)

(CB)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S32

1 2 3 4

3.7 MAIN ASSY(1/5)

C 1/5

4/5C5/5C

2/5,4/5C2/5C

2/5C

2/5C

2/5,4/5C 3/5C 3/5C5/5C

M65673WG-A

4/5C

(D)

(D)

(AT

)

1 chip System Codec

1 2 3 4

C

D

F

A

B

E

33

5 6 7 8

C 1/5

C 1/5 MAIN ASSY(VWV2013)

2/5C

VYW2176

VCC

GND

5

4 3

2

1

R1104

IC1104TC7SZ126FU-TLB

R1105 100 (S)10k (S)

(D): ATA Data Signal Route

: Audio Signal Route (DIGITAL)


(AT)

FLASH ROM

Backup SRAM

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S34

1 2 3 4

3.8 MAIN ASSY(2/5)

C 2/5

C 2/5

C 1/5

C 1/5

C 1/5

C 1/5

C 1/5

C 1/5

MAIN ASSY (VWV2013)

1 2 3 4

C

D

F

A

B

E

35

5 6 7 8

C 2/5

C 1/5

C 1/5

C 1/5

C 1/5

C 3/5

CN

701

B2/2

C 3/5

C 3/5


7

17

16

9

10

8

13

12

11

4

15

3

5

6

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S36

1 2 3 4

3.9 MAIN ASSY(3/5)

C 3/5

CN702B 2/2

C 2/5

C 2/5

C 4/5

C 4/5

C 4/5

C 2/5

C 1/5

C 4/5

C 1/5

VKN1814

R30

26

680

18

14

(D)

(D)

(D)

(D) (D)

(D)

RB501V-40-TRB

1 2 3 4

C

D

F

A

B

E

37

5 6 7 8

C 3/5

C 3/5

MAIN ASSY (VWV2013)

C 2/5

C 1/5

C 2/5

C 2/5

C 1/5

AK5357VT-TBB

(D): Audio Signal Route (DIGITAL)


DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S38

1 2 3 4

3.10 MAIN ASSY(4/5)

C 4/5

CN

202

J

C 4/5 MAIN ASSY (VWV2013)

C 3/5

C 3/5

C 1/5

C 1/5

C 5/5 C 5/5

C 3/5

C 1/5, 2/5

C 1/5, 2/5

MM1603DP

1

2

1 2 3 4

C

D

F

A

B

E

39

5 6 7 8

C 4/5

To

DR

IVE

AS

SY

(R

7)

C 1/5

To

HD

D

ATAPI BUS

(AT)

(AT)

: ATA Data Signal Route

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S40

1 2 3 4

3.11 MAIN ASSY(5/5)

CN1401K

C 5/5 MAIN ASSY (VWV2013)

C 1/5

C 5/5

IC5101UPD72852AGB-8EU-A

IC5101

1 2 3 4

C

D

F

A

B

E

41

5 6 7 8

C 4/5

C 1/5

C 1/5

C 4/5

C 1/5

C 1/5

C 5/5

IC5202UPD72893BGD-LML

IC5204 K4S161622D-TC80

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S42

1 2 3 4

3.12 FLKY, KIRB, FRJB and DVJB ASSYS

D

CN

201

B1/2

FLKY ASSY (VWG2489)D

1.0

1 2 3 4

C

D

F

A

B

E

43

5 6 7 8

D E F K

CN705B 2/2

CN5102C 5/5

KIRB ASSY (VWG2521)E

FRJB ASSY(VWV2004)F

DVJB ASSY(VWV2006)K

SLR

–343

DC

(NP

Q)

: Video Signal Route (C): Audio Signal Route (L ch)

(C)

(C)

(C)

: Video Signal Route (Y)(Y)

(Y)

(Y)

: Video Signal Route

INP

UT

2

SWITCHESS1001 : 0 OPEN/CLOSES1002 : & (REC/STOP)S1004 : 7 (STOP)S1005 : ¶ RECS1006 : REC MODES1007 : -S1008 : +S1009 : 3 (PLAY)

SWITCHESS1201 : STANDBY/ONS1202 : HDDS1203 : DVD

100

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S44

1 2 3 4

3.13 SDEB ASSY

CN402B 2/3

G

CN403

(SIF)

1 2 3 4

C

D

F

A

B

E

45

5 6 7 8

G

SDEB ASSY (VWV2033)G : SIF Signal Route (TUNER)

: AUDIO Signal Route (L ch)

(SIF)

(SIF)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S46

1 2 3 4

3.14 POWER SUPPLY UNIT

H

Not used

Not used

Not

use

d

Not used

Not used

Not

use

d

Not

use

dN

ot u

sed

AC IN

POWER SUPPLY UNIT (VWR1381)H

1 2 3 4

C

D

F

A

B

E

47

5 6 7 8

H

Not used

Not usedNot used

Not used

Not used

Not used

Not

use

d

CN

104

to H

DD

to R

7D

RIV

E A

SS

YB

1/3C

N40

01C

4/5

Note : No individual parts replacement for repair is accepted by Model Supplier due to the safety reasons. Replace whole ASSY.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S48

1 2 3 4

3.15 WAVE FORMS

JCKB ASSYB

2 CN402-pin 6 (4L)(Function : Tuner 2 ch)V: 1V/div. H: 200µsec/div.

1 CN401-pin 3 (UVOUT)(Function : Tuner 2 ch)V: 500mV/div. H: 10µsec/div.

3 IC501-pin 25 (V/Yout)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

4 IC701-pin 60 (R/Cout)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

5 CN701-pin 58 (G)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

7 IC701-pin 60 (R/C)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

6 CN701-pin 56 (B)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

8 IC701-pin 63 (YOUT2)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

9 IC701-pin 65 (COUT2)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

10 IC701-pin 68 (CVOUT2)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

13 CN701-pin 25 (GOUT)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

14 CN701-pin 23 (BOUT)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

15 CN701-pin 21 (ROUT)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

11 CN701-pin 29 (YOUT)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

12 CN701-pin 27 (COUT)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

18 CN701-pin 17 (ALMtoT)(Function : DVD play)V: 2V/div. H: 200µsec/div.

17 IC501-pin 42 (Lout)(Function : DVD play)V: 2V/div. H: 200µsec/div.

16 IC503-pin 2 (YCMIX)(Function : DVD play)V: 500mV/div. H: 10µsec/div.

19 JA502-pin 20 (V/Yin)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

20 JA502-pin 15 (R/Cin)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

GND GND GND GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

Note : The encircled numbers denote measuring point in the schematic diagram.

Measurement condition ;No.1, No.19 to No.31 : 75% Color-barNo.3, No.16 : 75% Color-bar, APX disc 1-24No.2, No.32, No.33 : 1kHz, 2VrmsNo.17, No.18 : 1kHz, 2Vrms, APX disc 1-1

1 2 3 4

C

D

F

A

B

E

49

5 6 7 8

JCKB ASSYB

22 JA502-pin 7 (Bin)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

21 JA502-pin 11 (Gin)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

23 JA502-pin 15 (R/Cin)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

24 CN701-pin 9 (Y/CVBS)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

25 CN701-pin 7 (C/CB)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

27 CN701-pin 7 (C/CB)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

26 CN701-pin 9 (Y/CVBS)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

28 CN701-pin 11 (CR)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

29 Q805-E (YIN)(Function : LINE1 IN)V: 1V/div. H: 10µsec/div.

30 Q806-E (CBIN)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

33 CN701-pin 5 (ALT to M)(Function : LINE1 IN)V: 500mV/div. H: 200µsec/div.

31 Q807-E (CRIN)(Function : LINE1 IN)V: 500mV/div. H: 10µsec/div.

32 JA502-pin 6 (Lin)(Function : LINE1 IN)V: 2V/div. H: 200µsec/div.

GND

GND GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

GND

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S50

1 2 3 4

MAIN ASSYC

1 X4102 - pin 4 (ADMCLKI)V: 1V/div. H: 20nsec/div.(Function : P.ON)

2 R4205 (VMCLK)V: 1V/div. H: 20nsec/div.(Function : P. ON)

3 Q2103 - B (Y)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

4 Q2102 - B (C)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

5 Q2104 - B (Cb)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

6 Q2105 - B (Cr)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

7 Q2101 - B (Y)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

8 CN2001-pin 23 (Cb Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

9 CN2001-pin 17 (Lch Out)V: 2V/div. H: 200µsec/div.(Function : PLAY)

10CN2001-pin 21 (Cr Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

11 CN2001-pin 29 (Y Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

12 CN2001-pin 27 (C Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

13 CN2001-pin 25 (Y Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)

14 CN3001-pin 13 (PCMAIN)V: 1V/div. H: 400nsec/div.(Function : PLAY)

15CN2001-pin 9 (SEL Y/V)V: 500mV/div. H: 10µsec/div.(Function : L1)

16 CN2001-pin 7 (SEL C)V: 500mV/div. H: 10µsec/div.(Function : L1)

17 CN2001-pin 5 (SEL L)V: 500mV/div. H: 200µsec/div.(Function : L1)

18 IC3402-pin 7 (27MCLK)V: 1V/div. H: 20nsec/div.(Function : P.ON)

GND

GND

GND

GND

GND GND GND

GNDGND

GND GNDGND

GND GND GND

GND GND GND

Measurement condition ;No.3 to No.8, No.10 to No.13 : 75% Color-bar, A1 disc 2-20No.15 ,No.16 : 75% Color-barNo.9, No.14 : 1kHz, 2Vrms, A1 disc 2-1No.17 : 1kHz, 2Vrms

1 2 3 4

C

D

F

A

B

E

51

5 6 7 8

4. PCB CONNECTION DIAGRAM

NOTE FOR PCB DIAGRAMS :1. Part numbers in PCB diagrams match those in the schematic diagrams.2. A comparison between the main parts of PCB and schematic diagrams is shown below.

3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram.4. View point of PCB diagrams.Symbol In PCB

DiagramsSymbol In SchematicDiagrams

Part Name

B C E

D

D

G

G

S

S

B C E

B C E

D G S

B C E B C E

B C E

Transistor

Transistorwith resistor

Field effecttransistor

Resistor array

3-terminalregulator

CapacitorConnector

P.C.Board Chip Part

SIDE A

SIDE B

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S52

1 2 3 4

4.1 TUNB ASSY

191

643

21

L313

C328

F301

R347

R351

C310L307

R345

F304

R320

F302

F306

C301

R361

C309

R329

F305

R317

R319

R353

D303

VR

300 R350

R352

C302

R337

Q314

R346

C319

KN300

R359

R357

R360

R356

Q319

R358

Q316

R333

C324

R323

C300

L306

L304

C308

CN

300

Q301

C317

Q311

C314

C323

C313

F303

C303

R354

R332

R324

Q315

U301

R325

Q307

L315

PC

AG

C A

djust

GN

D

C

V+

5TU

Q307

Q315

Q311

Q301

Q316

Q319

Q314

VN

P1965-A

AF

C A

djust

PYKC F4XG

ND

GN

D

V+

6E

AG

C

TU

NB

GN

D

C B2 E2

E B C2

B E

4/4

VW

V

LF

ICT

FC1

91

R

NP

SIDE A SIDE A

A A

TUNB ASSYA

CN

401

B

CN

300

(VNP1965-A)

1 2 3 4

C

D

F

A

B

E

53

5 6 7 8

2413 12

1

R312

C33

1

R316 L300

Q303

R30

3

C34

4

R31

4

R301

C334

Q30

4

L305

D302

C340

R33

1

R302

Q308

IC302

R348

C30

6

C327

C339

R31

3

R32

1

C343

L311Q31

2

R341

C30

5Q

306

L301

R318

Q30

5

R34

2

R33

8

R31

0

C33

7

C318

L303

C345

L316

C32

5

R31

1

C322

R35

5

Q31

7

R34

4

R309

R327

C32

6 R330

Q313

Q30

9

R300

C32

0

C31

6 C34

1

R308

Q300

C311D301

R306

R30

5

L302

D300

C312

R304

C338

R334

C335

R328

C33

0

R32

2

C33

2

L309

L314

C315

C329R326

R340

Q310

R30

7

Q302

L312

C342

R33

9

C33

6

C333

R34

9R336

R335C30

7

C304

R315

R343

SDA

SIF

GN

D

GN

D

V+5TU

+B

IF

SCL

SIF

P_S

AV

EB

S

V+37E

V+6E

VW

V20

03

LM/

SDA

UVOUT

LDASH

IC302

Q302

Q310

Q300

Q309

Q313

Q317

Q305Q306

Q308

Q304

Q303

SCLor

AF

T

BB(+5V)

AS

AGC

PIF

TUONAFT

VW

V20

18

AGC

NC

(+31V)+B

(+5V)

12124

13

11

9

LF

SIDE BSIDE B

A A

TUNB ASSYA

CN

300

(VNP1965-A)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

19

3

46

1

193

4

1

6

C13

4

C12

9

R81

2R

801

R80

2

C544

C522

C510

R53

0R

505

R51

8

R53

9

06

D52

8D

526

R13

4C

825

C83

2IC

809

R81

0

R811

V9V

FLD

C+

FLD

C-

FL-

28V

100

201

DVR-520H-S54

1 2 3 4

4.2 JCKB, ATWB and ATHB ASSYS

1

754

1

58

41

91

87

59

29

1

5830

116 88

1

85

4 1

1

85

4 1

10 6

51

13 1

OU

T

GN

D

IN

81

3

4

40

1

40 1

40

1

40 1

2 1

14 5

7

14 5

8

91

129

30 58

59

87

88116

1 3

45

1

14

58

2 1

4

5

1

8

-

+

1 3

45

T

113

R

LF

NP

18

3

4

NPN

P

ICT FC

40

1

40 1

40

1

LFR

40 1

D10

1

C124

CN105

L101

C12

6Q

102

L100

C12

2

R100C

107

IC101C110

C109

R81

5

R813C242C241

BT200

R284R283

IC20

4

C235

X201

R279R278

C236

X20

0

R274

C232

R272

C233

R270R

269

R271

R265R264

R254

C22

5

C224

C231

R251

R263

R26

2

R260

R258

R259

C22

7

C226R255

R25

6

R253

R252

C22

1

C222

C223

R249

R250

L200

R24

6

R243R242

C22

0

R23

8

R239

R24

0R244

R23

6

CN202

Q207

R234

R235

Q208

R22

6

R23

1

R22

8

R229

R230

C21

8C

219

Q20

6

R22

7

Q205

R224

C217

R225

IC202

JA200

C213

C212C211

R216

R211

R221R210

R208

R21

8

R219

C20

7

R214

R212R213

R206

R20

9

Q204

C214

C210

R207

C209

R205

IC201

CN201

C20

4

Q202

R20

3

C203

C805C20

0

D200

R119

C15

5R

118

R12

4

C159

R12

8

R129

R127

C157

Q111

C15

8

R123

R12

1

R12

0

C156

R117

R116

L102

R114

C153

C15

4

X10

0

IC10

4

C161

R130C160

R13

1

C14

5

D10

3D

102 Q10

5

Q106

C144

R110

C14

2

C14

1

C143

C140

R247

D20

5

R293

CN703

KN702

R55

6

C57

6

IC50

0

D50

3

D502

C53

2

R575

R555

C565

R570

C54

8

Q505

Q504

C54

2

C549

R559

C54

7

R558

R557

C546

C541

R568R569

C521

C534

C533

C524

R53

3

R53

2

R53

1

R51

7R

504

C50

8C

509

R51

3

Q500

R51

2

R52

5

R526 Q501 R524

R527

R51

4

R515

R52

9R528

R523R52

2

R511C507

C506

R510

R50

8

R501

R50

9

R502

R54

6

R54

7 R54

8

D501

RY500

C55

8

C651

C65

0

IC650

R654

JA651

R651

C8

C804

C803

C80

2

C57

0

C57

1

C573

C572

CN705

D51

0

D51

1

D50

6

D50

8

D51

4

D51

3

D50

5

D50

7

D50

9

D51

2

C165

JA502

Q507

C57

7

C809

C810

C824

C83

1

D206

D532

D534

IC80

2

IC803

IC81

0

Q50

9Q51

1

Q513Q514

Q51

5

Q516

R21

5

R58

4

R58

5R

586

R58

7

R58

8R

589

R59

0R

591

R59

2

R59

3

R81

4

VR802

CN14

CN13

CN12

L103

C229

R29

6

D65

2

D651

C83

8

C83

6C

837

R602

R603

CN11C

246

PG

M

VP

P

SC

LK

XD

LRS

T

VD

D

TX

D

RX

D

BU

SY

GN

D

CONTACT UP SIDE

(HDD)

ATHB

VWV2002-

V+13SW

V+

5M

V+6SWV+3.3E

CB_ADJ

V+6E

VWV

VWV

V+

13S

W

GN

D

SD

ET

2Y C V R L

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

D

PC

MO

UT

GN

D

GN

D

FLD

AT

A

V+

5EG

ND

GN

D

FLPON

V+

13S

W

FLC

LKF

LST

BN

CK

EY

1 IRK

EY

2

GN

DLED

_DV

DLE

D_H

DD

CONTACTSIDE

CONTACTSIDE

CONTACTSIDE

(WRITER)

ATWB

VWV2005-

MDK337V-0 N

CONTACT UP SIDE

MDK337V-0 N

JUST

SY

NC

AF

T

XR

ES

ET

_IN

FA

NP

WM

P_CONT

XRESET

SC

L

SDA

Q102

Q207

Q208Q206

Q205

Q204

Q202

Q111

Q108

Q105

Q106

Q107Q112

Q505

Q504

Q500

Q501

Q502

Q702

Q703

Q700

Q708

Q709

Q710

Q507

Q808

Q509

Q511

Q513Q514

Q515

Q516

Q801

Q802

Q804

Q807

Q806

Q803

Q805

IC103

IC101

IC204IC202IC201

IC201

IC104

IC500

IC504

IC502

IC503

IC701

IC650

IC703

IC801

IC802

IC803

IC805IC806

IC807

IC808

IC809IC810 IC811

SIDE A

B H I

JCKB ASSYB

CND

(VNP1978-A)

(VNP1978-A)

CN

R7 DRIVEASSY

R7 DRIVE ASSY

CN703

CN1301

for

Dow

nloa

ding

F

CN

705

LithiumBattery

ATHB ASSYI

ATWB ASSYH

CN14

CN

4401

C CN

13

to HDD

CN12

CN4501C

CN11

1 2 3 4

C

D

F

A

B

E

75

OU

T

GN

D

IN

57IC101

C109

R

C

C14

5

Q10

C144

C14

1

C143

C140

C533

R53

2

Q500

C

C

C810

IC

VR802

C83

8

C83

6C

837

CB_ADJ

FLC

LKF

LST

BN

CK

EY

1 IRK

EY

2

D

C

55

5 6 7 8

OUT

GND

IN

19

151

191

58

41

85

4 1

3

4 6

1

80 61

6041

402120

1

32

1

1815

14

13 1210

9

87

5

43

21

3

4 6

1

24

1

15 1

51

981 16

85

4 1

3

4 6

1

3

4 6

1

3

4 6

1

3

4 6

13

4 6

1 3

4 6

1

19

15119

1

58

41

14

58

NP

NP

NP

NP

NP

NP

13

4 6

120

21 40

41

60

6180

32

1

4 6

3 1

24

1

115

18 9

16

14

5 84 6

3 1

64

3 1

4 6

3 1

13

4 6

13

4 6

13

4 6

NP

LF

R

R83

0

R831

C13

4

C12

9

C13

0

C13

7C

133

C12

2 C114

C112

C111

IC103

C11

6 C115

R81

5

R80

9

813

R81

2

R80

8

R80

3

C78

4

R80

1

R80

2

805

C151

C14

8

C14

6

C15

0

Q108C147

R11

2

C149R113

R11

1

6

R82

4

C16

4

CN104

R807

Q107

Q112

CN

401

KN703

KN

701

C755

C74

9

C75

2

C74

7

C743

C748

C74

6

C739

C75

7

C75

4

C56

3

C56

4

IC504

C544

R57

9

C56

6

C56

9

R56

4

IC502

C55

1

C722

C717

C716

C554

C553

C519C522

C520

C518

C517

C534

C52

3

C537

R53

4

R55

1

C539

C510

R51

6

R53

3

R53

0R

505

R51

8

R51

7R

504

C50

8C

509

R54

5

R543 R561R560

R56

2

R54

4

R519R520 R542

R53

7

R53

8

R54

0

R53

9 R53

5

R53

6

C52

6

C52

7

C70

6

C70

7

C70

8

R57

8 R56

6

R552 R503

Q502

C55

8

C557

C556

C561C560

R58

1

R58

0

IC503

C54

3

C550

C56

7

C56

8

C726

C72

7

C73

5

C723

C736

C725

C720C719

C724

C721

C711C712

C710

IC701

C70

3C

702

C70

1

Q702

R711

C71

3

R70

9

CN701

R710

R706

C718

R70

7

C70

9

JA700

Q703

R723

R732

R724

C74

0

C751

D706

D70

5

C750

C73

8

C75

6

C75

3

R73

0

C72

9 C73

7

C715C714

C705

C730

C731

C73

2R

714

R71

5

C73

3

C73

4R

716

Q70

0

R703

R70

1 R70

0

R702

C806

C767

C76

6

C801

R73

7

C77

1

R743

L701 C770

C769

C76

8

Q708

R74

2

804

803

C80

2

L702

C773

R746

C77

2

C77

5

C774

R74

5

Q709

L703

C777

R749

C77

6

C77

9

C778

R74

8

Q710

R58

3

R582

C78

5

R75

2

L704

C78

0

D52

8D

526

D52

9

D52

4

D52

3

D52

7

D52

5

D53

0

D53

1

D52

2

JA501

IC703

C781

C782

CN702

C783

Q808

C788C787

C786

R13

4

C807

C808

C809

C811C812

C813

C814

C81

6C

817

C81

8

C81

9

C820

C821

C822

C823

C82

5

C826

C827

C828

C829

C830

C83

1

C83

2

C83

3

C834

C83

5

CN402

D80

1

IC801

803

IC805

IC80

6

IC807

IC808

IC80

9

IC81

0

IC81

1

L801

L804

Q801

Q802

Q80

4

R804

R805

R80

6

R81

0

R811

R81

4

R81

6

R81

7

R818

R819 R820

R82

1

R822

R823

R836

R835

R82

7

R82

8

R82

9 R83

4

R83

2

Q807

Q806

Q803

VR801

VR803

R833

Q805

C815

R837R838

R839R840

R841R842

R84

3

D707

D708

D709

R597

C792

C578

R731

R82

5

R826

GN

DA

GNDA

GND

GND

V+

15E

V+

5VI

V+

6SW

V+

5VI

V+9

V+

5SC

V+

12S

C

LineKnife

VWV2030-

CONTACTSIDE

GND

GN

DA

V+

13S

W

V+

12S

C

V+

9

VWV

PC

CR_ADJ

Y_ADJ

AFT

AGC

GN

DC

SY

NC

ING

ND

NC

GN

DA

ALM

toT

GN

DA

AR

Mto

TG

ND

AR

Mto

T

GN

D

GM

toT

GN

DC

Mto

T

GN

DY

/VM

toT

GN

D

CLP

OU

TV

+5V

O

V+

6SW

V+

9V

GN

DA

NCGNDUVOUTGNDLDASHLM/P_SAVEBSGNDSIFGNDV+37EGNDV+6EGNDTUONAFTSDASCLAGC

GN

DLED

_DV

DLE

D_H

DD

FLD

C+

FLD

C-

FL-

28

GN

DV

+6S

WS

TB

YQ

XR

ES

ET

DC

TR

IS

CL

SD

AV

+9

GN

D4L G

ND

4R GN

D

SIF

GN

D

P_O

N

FLO

NF

LDC

-

FL-

28V

FLD

C+

GN

D

EV

+37

V

GN

D

EV

+6V

GN

D

SW

+13

V

GN

D

SW

+6V

GN

D

EV

+15

V

GN

D

V+

13S

WB

UP

V+

5VI

MU

TE

XR

ST

LAM

UT

EX

525P

RA

MU

TE

MR

ST

GN

DP

CM

OU

T

GN

DH

SM

toT

P_C

ON

TS

SM

toT

GN

DS

ST

toM

GN

DH

ST

toM

GN

DA

SC

K

GN

DS

PD

IF

GN

DB

Mto

T

AG

CC

TL

GN

DA

RT

toM

GN

DA

LTto

MG

ND

C/C

bTto

MG

ND

Y/V

Tto

MG

ND

CrT

toM

JCKB

VWV2024-

100m

m96

mmV

CONTACTSIDE

CONTACTSIDE

VWV2031-VWV2040-

MDK337V-0 N

CVBS

C/Cb_IN

Y_IN

AR_IN

AL_IN

Cr_IN

Y/V

CAL

AR

E

C

B

C

B C2

E2B2

E BE C2

E2B2C

NP

VNP1978-A

SIDE A

B

CN1001

(VNP1978-A)N201

CN3001C

CN702

CN3002C

CN701

CN201H

CN104

CN403G

CN402

CN

401

CN300A

DVR-520H-S5 6 7 8

C

D

F

A

B

E

03 C135C

132

C118

285

R54

1

01

C56

2R

736

V

P_O

N

FLO

NFLD

C-

V+15E

V

V+9

1

N104

DVR-520H-S56

1 2 3 4

8

7 1

14

30 16

151

1

44

8

7 1

14

30 16

151

1

44

Q1

C136

C117

C108C113

R28

7

R28

8

R28

6

R

R281C

234

IC205

R280

C106

C76

1

C75

9

C760

C74

4

R728

R72

9

IC702

R727

C74

5

IC5

R56

3

R57

6

R506

R500

C559

C555

R550

R549

C53

5

D701D702 D700

R70

4

C763

Q707

R72

6

C74

2

R72

5

C76

4

C762

R72

0

C741

R71

9

C758

Q704

R718

R722

Q705

R713

R721

R712

C728

D703

D704

R74

4

R74

7

R750C

574

C53

6

R598

R70

8

C791

C789

C790

LM/

GNDLDASH

SW

+6V

SW

+13

V

GN

D

GND

GNDA

V+6E

V+13SWV+9

SIF

GN

DG

ND

4R GN

D4L G

ND

V+

9S

DA

SC

LD

CT

RI

XR

ES

ET

ST

BY

QV

+6S

WG

ND

GN

DA

V+5SC

GND

GN

D EV

+37

V

NC

GNDSIF

FL-

28V

FLD

C+

GN

D

UVOUT

GN

D

EV

+15

V

V+5SC

V+5VI

GND

GND

SDA

VWV2024-VWV2030-

V+37EGNDV+6EGNDTUONAFT

V+37E

EV

+6V

GND

P_SAVEBS

GND

GN

D

GN

DY

/VM

toT

GN

D

CLP

OU

TV

+5V

O

VWV2031-

CM

toT

GN

DG

Mto

TG

ND

BM

toT

GN

D

RM

toT

GN

DA

AR

Mto

TG

ND

AA

LMto

T

GN

DA

NC

GN

DC

SY

NC

GN

DC

rTto

MG

ND

Y/V

Tto

MG

ND

C/C

bTto

MG

ND

ALT

toM

GN

DA

RT

toM

GN

DA

GC

CT

L

SP

DIF

GN

DA

SC

KG

ND

HS

Tto

MG

ND

SS

Tto

MG

ND

AGC

SS

Mto

T

P_C

ON

T

SCL

HS

Mto

TG

ND

PC

MO

UT

GN

DM

RS

TR

AM

UT

E

X52

5PLA

MU

TE

XR

ST

MU

TE

BU

PV

+5V

I

V+

13S

W

GN

D

MDK337V-0 N

44

C B2 E2

E B C2

C

B E

E2B2C

E B C2

NP

1

Q104

Q103

Q101

Q201Q200

Q110

Q109

Q209

Q203

Q100

Q506

Q503

Q707Q704

Q705

IC102

IC205

IC203

IC702

IC501

148

7 1

15

191

115

1630

1

32

NP

20

21

1

24

LF

151

VWV2 A-0123456789

00112233445566778899

R

SIDE B

B

JCKB ASSYB

(VNP1978-A) CN702CN701 CCN402

CN

401

1 2 3 4

C

D

F

A

B

E

1

44

1

44

C136

C117

R280

R56

3

50

549

C57

4

SD

AS

CL

DC

TR

IX

RE

SE

TS

TB

YQ

V+

6SW

GN

D

V

GN

D EV

+37

V

4-0-

EV

+6V

1-

44

1

15

57

5 6 7 8

6 4

31

1

85

4

22

23

6 4

31

1

85

4

22

23

C13

9

R108

R105

R10

9

R107

Q104

R10

2

C13

8

R10

6

Q103 C135

C13

2

C131

R101

C128

R10

4

C12

7

C12

5 R10

3

D10

0

C123

Q101

IC102

C118

C12

1 C120

C119

C24

0

C23

8

C23

7

R285

R281

D203R282

R277

C23

9

R27

6

R275

D20

2

IC203

R273

R261

C228

R245

R24

1

R232 R233

C215

C216

R222

R22

0

D201

R22

3C

205

R202

C202

R201 Q201

C201

Q200

R126

R125

R12

2

R11

5

Q11

0

Q109

C152

C16

3

R13

3R

132

C16

2

Q209

R28

9

R29

0

Q20

3

R237 R248 R257

R291R292

C24

3

R204

Q100

D10

4

R54

1

Q506

R57

4

D504

R572

R573

R571

D515

C55

2

IC501C538

C54

5

C52

5

C51

2

C511

R52

1

C51

4

C51

6

C53

1

C529 C505

C50

4

R50

7

R565

R567

R553

R554

D517

D50

0

C54

0

Q503

R577

D51

6

C56

2

C765 R734

R73

5

R73

6

R65

5

R66

1

R66

0

C652

C575

R705

C70

0

R599

L802

L803

R594

R59

5

R59

6

C23

0

C24

4

R266

R268

R267

R295

R294

R74

1

R740

R73

9

R738

R297

R601

R604

R605C

245

R298

V+

5E

GN

DG

ND

NC

IR KE

Y1

FLD

C-

V+5SC

CN202

VD

DP

GM

TX

DV

PP

RX

DS

CLK

BU

SY

XD

LRS

TG

ND

LED

_HD

D

V+15E

V+13SW(HDD)

VWVG

ND

+5SC

V+12SC

GN

DG

ND

GN

D

P_O

N

GN

D

FL-

28V

FLD

C+

GN

D

YCV

KE

Y2

GN

D

GN

D

FLO

N

R

V+5M

V+5M

FL-

28V

LED

_DV

D

FLC

LK

GN

D

FLP

ON

V+

13S

WF

LDA

TA

L

FLD

C-

V+15E

FLS

TB

FLD

C+

GND

GN

D

SD

ET

2

VWV2040-

V+9

(WRITER)MDK337V-0 N

MDK337V-0 N

DLCE

23

22

4

31

6

14

5 8

19

1

2

3

1

19

11 13

LF

1

2

20

211

240

1

40

1

ABC

10

0

3210 9876543210

1

LF

R

R

SIDE B

IHB

CN201CN104 CN703

CN

705

CN14

CN12

ATHB ASSYI

ATWB ASSYH

DVR-520H-S5 6 7 8

C

D

F

A

B

E

C521

4

5502

129128

5103

C5104

R5290

5126

TP51

06

R527

317

2

R527

41

7 8

C105

0

R5289

17

28

R5285

17

28

C1057

L100

6

66

R1031

C1051

R100

8

R310

4

7

IC31

01

916

R202

6R2

015

D310

3

R

RRR

R

TP20

15

TP20

17TP

2025

DVR-520H-S58

1 2 3 4

4.3 MAIN ASSY

TP4015

D4002 LC5121 C5122 C5124F5101 R5

116

R511

4

R512

2R5

120

IC4007

L5102

L5101

L550171

CN5102

C4033

R5R5

C510

1

C

C511

2

C5127C512

0

C4032

C5132

C5138

C5137

C5136

C510

2

C403

4

L5103

L5104

L5106

L5105

16

1732

33

X5101

R5107

R5108

R5103

R511

0

R511

5

R511

7

R512

1

R510

9

R5125 R5126

L100

4

C105

6

R107

4

R220

6

R220

7

7 17 17 1

Q22

02 R100

5

R410

1

R210

9 TP10

51

C102

8

C102

7

C102

5

C101

6

R5127

R511

3R5

112 R5

132

R513

1

R410

5

C101

1

C410

7

L100

9

L100

8

R111

1

R1052 R101

2

D111

1

R5106

R5105

R5104

R5130

6449

48 1

IC5101

C

C5125

C5110

C5111

C5105

C111

4

C4105 R410

8

C1054

C1061

Q1102C4106

L100

7

C1031

C1032

C1104

R109

0

R1071R4

102

R2114R2116R526

5

R4104R4103

R411

0 R512

3

R512

4

R4106

R4107

R211

2

R2115 R1024R1023

R1022R10213

4

2

1

X410

2 C512

3

C511

9

C511

8

C5113

C101

4

C100

4C1

003

C100

2

C100

1

C151

0

C150

9

C150

8

C4102

C410

3

C410

4

R100

9

R410

9

C106

0

TP28TP1041

TP1050

TP10

60

VR2104

IC41

01

14 5

8VR2105

VR10

01

VR10

02

R230

2

R230

3

R2111R4306R4305

C210

4 C105

5

L100

5R2252

C104

2

Q23

11

R1034R2105 R2106

L1102

L100

1R2266

R231

2

R2311

R101

1

R211

3

R100

3

TP1002C2246

C2265

C104

1

C103

7

C103

4

C2319

C210

6

C210

5Q21

05

Q21

04

C2317

R4307

R2313

R2314R2

102

R210

3

R100

6

C1044

C1045

C1017

C1018

C1019C210

3

C210

2TP43

04

TP43

05

TP43

06

TP43

07

TP1067

Q2312 Q21

02

Q21

01Q2302

2 8 2 8

R230

1

L100

3

C2204

C105

9

CN4301

R10

R223

3R2

235

R210

7

R2210

R2201R2202R2304R2307

7171C2301

Q2301

Q2201 Q2222

Q21

03TP14

C2101C1039

C1049

C103

6

C103

8

C103

5

C102

9

C103

0

C102

6

C102

4C1023

C1022

C1021 C1048

C1047

C1012 C1052C1005

C1006

C2222C2209

C220

2

C2306

R100

4

D420

1

R4209R4208R4207 D420

2

6 1 81 C221

0

R420

5

R108

0

R420

1

C420

1

C420

2

R5222

R5223

R220

4

R2239R2221

R2227R2205R2203

R2209

8 2R4304

8 2R4303

8 2R4302

82R1048

82R1045

82R1043

VC4201

23

C310

C105

8

C220

1

C2205

C421

1

C105

3

C101

3

C222

1

TP4202

TP4301

TP4302

TP4303

TP15

TP1012

TP1013

TP10

27

TP10

28

TP10

29

TP1030TP10

32

TP1031 TP1033

TP1026

TP1024

Q2203 C220

8

C222

0

C420

9

C420

813

IC42

05

R3105

R190

1

R190

3

R190

4

R190

2

R233

1

R233

2

R233

3 R421

0

R4213

Q2204

C233

1C2206

F420

1

L420

1

X420

1

1 8

1 7 1 71 7

R233

4

R220

8

R2305R3108R3107

R3106

R4211R4212R4206

C420

6

R2214

C421

0

C420

3

C233

2

C233

3

C222

3 4 1IC4206

4 5

4 5

L4202

IC23

31

4 3 R420

2

R420

4

C231

1

C2243

R230

6

R240

7

R240

4

R327

0

R327

1

R201

1

R201

2

R201

3

R201

4

71

CN19

01

C233

4

R2308

R225

4

R225

3

R225

5

C3251

C2302

C2241

C2305

C4207

C2406C2407 C2

405

C3255

TP2007

Q22

41

C230

8

IC22

11

4 5IC

2302

14 5

8

IC2301

14

5 8

R1905

R204

7

R202

7

R202

5R2

040

TP48TP49

TP50

TP25

06

TP25

05

TP25

04

TP25

02

TP25

03

TP25

01

TP20

16

TP20

18

TP20

01

TP20

02

TP20

03

TP20

04

TP20

05

TP20

06

TP20

08TP

2009

TP20

21

TP20

11

TP2022

TP20

12

TP20

13

TP20

14

TP20

19

TP20

24

TP20

23TP2020Q24

03

Q24

02

R250

2

17

28

R2408

R2409

R2406

R240

5

R241

1

R241

2

C

SIDE A MAIN ASSYC

CN1401I

CN

5102

IC4007

IC5101

Q1102

IC5202

IC4101

Q2105Q2104Q2311

Q2101Q2102Q2302Q2312

Q2301Q2103

IC5204

IC3301

IC4008

IC3403IC3402

IC4206IC4205IC3101IC4004IC2331

IC2211

IC2301Q2241

Q2402Q2001

Q2403

Q3201 Q3202

IC2302IC4003 IC4005

IC3001

Q2201Q2222

Q2202

Q2203

1 2 3 4

C

D

F

A

B

E

22 C5124

C5127

16

7

126

R5127

R51

4

1

C

L100

7

R512

4

C512

3C1

042

L100

1

1044

1045

C105

9

1039

1049

1048

1047

052C1005

2C4

211

TP1012

TP1013

R3

R3R3

R3

1

02

R201

3

C325

C3255

07

TP20

16

TP20

13TP

2023

59

5 6 7 8

R5234R5217

C521

0

C520

9

C520

4

C521

4

L5504L5502R5252

17R5251

17R5249

17R5247

17

R5129R5128

R5216

R5215

R5233C5103

C521

2

C5216

TP31TP32 TP38

TP5202

TP5201

C5104

C5207

28 28 28 28

1 156

157208

R526

3R5

262

R526

0R5

257

R525

6

R525

3R5

254

R5232R5231

R5214

R3312

L550

7

R4435R5282 10552 2R5290

R5237

R513

2

R513

1

R440

71 2

R5236

R5235

R5272

30IC5202

C5226

C5126

5125

C5217

C5215

TP51

06

R527

317

28

R527

41

7

28

R522

117

28

R522

01

7

28

R521

917

28

R521

81

7

28

R527

517

28

R440

51

7

28

R440

61

72

8

CN44

01

R4432

R4429R4428

R5314

R5313

R5228R5227

R5225

R5224

R5238R5276

R5286

R5277R5287

R5288

R5278R5279R5280

R5281

82

71

C5228

C5227

C105

0

C106

0

R5230

17

28

R5229

17

28

R5289

17

28

7 8

R440

8R4

508

TP33

03

R4501 R4503R4504

R526

1

C521

1

1 7 1 7

R524

8

R524

0

R529

6

R529

5 R524

5

R524

6

R523

9R5

244

R5283

R5284R5285R1

003

C4020C4401

C521

8

C520

8 C520

6

TP52

0417

28

R52592 8

R52582 8

R52502 8

2 8

R443

617 8

53 104

R524

3

R524

1

R524

2

R3303 R3304

R5293 R5294C1057 C5

329

C5230 C5223C521

3

C522

5

C5222 C520

51 7R52551 7

R450

717

28

1

2

L100

6

CN45

01

1213

IC33

01

R3311

R1066

R3307

R3310

R1031IC5204

82

71

R4510

87

82

71

R4509

C532

1

C1051

C1006

R100

8

R310

4

R310

3 31C3102C4027

C401

8

F400

1

F340

3

C330

1

F340

1

L5508

L3301

C340

3

124

R3313 R5298 R5297R3306

R3305

R4530R4531

R4534R4537

R454

1

R340

7

R340

3

R340

5

R340

6

R3309

D4001

IC4008

R341

1

82

71

R453

8

8 5

IC3403 D4501C3107

C5221

C105

8

R4019

R3102

C5231

C5224

C5229

C340

4

C340

5

C3302

C3303

C340

8

C104

0

TP34

01

TP4010TP4001

IC3402

16 9

CN40

01

C340

6

R402

0

IC31

01 R340

8

105

1

C4014C3402

81

C3106 TP3403 C402

9

C3108

C310

1 C340

7

C402

8

89

1 4 R401

7

R341

0

R3409108107

106

8F310

2 TP4201

TP4009

TP4008TP3402

C310

5

C403

1

R4010

R4015F3402

16 1

IC4004

45 R401

8

R202

6

R201

9

C402

1

Q20

01

IC30

01

R201

4

R201

5

D310

4

D310

3

D3001 D3002

D310

1

D310

2

R320

5

R3204R3203

R320

2

R30031

R401

4R400

1

R400

9

R201

7

C400

6

C4005

C402

4

C402

3

C4013

C300

4

F400

3

C4004

TP4002TP4012

TP4011 TP4005

Q3201 Q3202

1011

IC4003 IC4005

R3001R3025R3024R3023

R3022

R400

8

R400

4

R300

2

C4010

C300

1

C3002

TP40TP41

TP42

TP20

14

TP20

15

TP20

17

TP30

12

TP30

11

TP30

13

TP30

10

TP30

09

TP30

08

TP30

07

TP30

06

TP30

04

TP30

02

TP3014TP3001TP3003

TP30

05

TP20

24

TP20

25

120

SIDE A

(VNP1960-C : WYXU type)(VNP1976-C : WYXK and WVXK types)

C

CN

4001

CN202H

CN

4401 to DRIVE

ASSY R7R

This PCB is six layer structure.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

82

71

R1305

C1309

7

8309

C1311

R3268

R1055 TP1TP10

C3

R1053

TP1014

C32

57 R32

260

58

261

P2010L2

32

DVR-520H-S60

1 2 3 4

L1402

L5503

L1301

43

82

71

R1306

C5203

TP1TP2

TP3

TP8

C1313

C1310

C1302

8 7R1408

R5209TP4521 R4532

R5342TP4428 TP4429

R4434

R5343

R1426

71 116

C5342TP4417

L5505

44

C5341

21

82

71 R4404

82

71 R4401

8 7

82

71

R142482

71

R1423 82R1310

2R1

134

5

IC5301

154

C1426

C1425

C1424

C1423C1422

C5311R5305 R5306

R5311

R5309

R5308

R5312

R5304R4426

C1312

R4403

R4402

TP4405TP4403

TP4402

TP4406

TP4407TP4409 TP4410

TP4411TP4413

TP4415

TP4401

TP4404

TP4408

TP4412

C1301C1421

R5341

82

71 R4417

82

71

R4416

87

R4410

2 182

71

R1425

9

81

IC5341

L5301

IC1421

C1428

C1427

C5343

C5310

R5310

R4433R4431

R4430R4425 R5307C5308

R1412

TP4414

TP4416

TP4419TP4418

TP4421TP4420

TP4423TP4422

TP4424TP4425TP4426

TP4427

C5309

R5301

C5301

R4506

2 1R5327

R5330

C5327

C1405R4505TP4505 TP4508 C5322

R1404

D4401

R1032

D5322D532121

82

71 R4502

82

71 R4423

82

71

R14058 7

C1403

154

27 28

C1429C4025 R1033

R1065

R5323 R5326R5325

C5306

C5326

C1404

R4440

R4427

TP4503

TP4502

TP4506TP4501

TP4504

TP4430

C4019

R5321

TP1017

TP1016

TP101

C5307

IC5321

5 4

IC4006

543

1

R5328

71

82

71 R4518

82

71 R4512

87 82

71

R140782

71

R1406

C1406

IC1401

R1402

R5324

R5329

R5264

C5323

C5325

C5328

C1408

C1407

R4533R4528

R4527TP4507

TP4509 TP4510TP4511

TP4513

TP4517TP4515

TP4514TP4518

TP4519TP4520

TP4512

TP4516 R5322TP5003

C5324 L5321

31

IC5322

14 5

8

R4005 R4012

R3266

C4008C4007

C1401

C5008

1 16

L1401

F3201

54

IC5002

2 1

82

71

R14098

2

71

R1410

82

71

R141182

71 R4525

82

71 R4519

R4536R4535

C1409

C1402

27 28

C5007

C4501 R3263R3262

R4529

TP4522TP4523

TP4524TP4526 TP4525

TP4527TP4528 TP4529

TP4530

C5006

TP5004

C5005

GND

Q4000

IC4002

R3254

R3265

R3253

R3251

C3205

C3203C3202

C3253C3254

C3207

C3208

C4026

R3255

C4012

TP3251

TP3253TP4003

C3201

C3204

C4001

C4022

C4002

C4037

IC3201

8 9

R3012

R3017 R3015

R3014

R3011TP4007TP4006

TP4004

R3010

C3258

C3257

C3252

C3005

C3003

C3006

C4016

C4030 R32

R3

R3009

R3013

R3016

R3019

R32

R3

R3267

C4017

TP4014

T

C4015 R3201

R3252R4006

R4016

IC3251

C4009 IC3002

17 8

14

C4011

F4002

R3269

R4013

R4011

TP13TP12

TP11

TP10

TP4013C4003

CN3001

24 1

C

SIDE B MAIN ASSYC

CN3001

CN702B

IC1103IC1104

IC1301

IC5301

IC5341

IC1421IC1102

IC4006

IC5321IC1001

IC5322IC1401

IC5002

IC3201

IC4002IC1201

IC2501

IC3251

IC3002

Q4000

IC1101

1 2 3 4

C

D

F

A

B

E

43

82

1

R130

C13027

71

44

77

1

82R1310

1

12

71

R1033

5TP1017

6

TP101

71

R5264

07

161

71

71

R14107

151

C3253

C3207

C325

TP39

R3014

C300

IC3251

1

61

5 6 7 8

R5144

R5143 TP23TP21

3 1IC1104

1

116

IC1103

R5142

R5141

7

6

82

71

R130582

71

R1304

82

71

R1303

TP5105

TP5104

TP5103

TP5102

TP5101

TP27TP26TP25

TP24R1103

C1310

C1309

C1307

C1305

C1304

C1303

C1108

R1104C5135

C5131

C5117

C5109

C5116

C5108

C5115

C5107

C5114

C5106

C5134C5133

R1121

IC1101

R1002

R1025

71 71 71

TP1043

TP1046

TP1047

TP1048

TP1049

TP1063

TP1064

54

86

IC1301

17 32

NIN15

8 2

7 1

R1026

21

82R1309

82R1308

82R1307

8 2

7 1

R1072

82

71

R1073C1311

C1308

C1306

C1512

C1511

R1302

R1015

R1016

R1017

R1109

R1110

R1108

R1106R1107

R1112R1113

R1118

C1312

R1091

R1120

R1312R1311

TP22

C1502

C1507

C1503

C1506

C1505

C1504

C1501

TP1044

TP1045

TP1034

IC1102

82

71R1077

82

71R1076

87

C1007

C1009

R1078R1079C1062

TP1040

TP1037

TP1052

TP1053 TP1054TP1055 TP1056TP1057

TP1058

TP1059

28R1059R1092

L100282

71 R1068

TP1003

C1008

C1010

C1105

C1113

R1057

R1056IC1001 R1058

R1035TP1001

TP1004

TP1020TP5211

TP5209TP5210

TP5208TP5207

TP5206TP5205

TP100

R1069

17

28

82

71

R1054

27

C1109

C1111

R1064

R1105

R1060R1063R1062R1061

R1093

R1119

TP1005

TP1006TP1007

TP1008

TP1009

TP1042

L2501

C2506

IC2501 TP1901R3268

8 7 R1051

C1207

C1202

154 C1102

R1055

R1070

R1081TP1010 TP1036

TP1022

TP1062 TP1061

TP1065

TP1066

82

71R1117

82

71 R1115

82

71R1114

82

71R1116

82R1050

7 1

R1208

C1103

C1106

C1107

C1110

R1202

R3263R3262 TP1011TP1015

TP1035

TP1038

TP101917

L1201

L1101

C2508

C2505

34

33 2322

8 2

7 1R2503

2 17182

71 R1049

82

71

R1046

82

71 R1044

82

71R1042

8 2R1204

R2501

C3206

C1205

2854

IC1201

C3205

08

R1053

R1075

251 TP1903

C1101

TP1014

TP1039 TP1018TP1023R120628

R2506

C1209C1208

C1206

C1204

C1203

127

C3256

5

R3257 R3256

R3260

R3259R3264

R3258

R3261

TP3252

TP2507

TP2508

TP1902

TP1904

TP1905

TP1907TP1906TP2010

C1901

C1201

R1207

C2501

R120517

28

R120317

28L2101

1

1112

44

C2503

C2504

C2507

C2502

7 1

TP16TP17

TP18

TP19

R2505

D2501

ZF5

CN2001

32 1

CN2501

SIDE B

CCN2001

CN701B

This PCB is six layer structure.

(VNP1960-C : WYXU type)(VNP1976-C : WYXK and WVXK types)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

MODE

C MODE

DUBBIONE TO

MODE

ONE TO

C MODE

DUBBI

DVR-520H-S62

1 2 3 4

4.4 FLKY, KIRB, FRJB and DVJB ASSYS

71

19 1

71

1

91 3327

D1203S1201

W10

26

W1204C1203

W12

05

CN1201

W1200

L120

1

W10

09

W10

14

W10

15

W10

25

W10

10

W10

12

W10

08

W10

13

S1009

W10

16

W10

07 W10

00

W10

04

W1011

W10

02

W12

02

W10

03W

1017

W10

01

W12

07

S1203

CN1001

W1206

CN

1002

IC1201

L100

1

V1001

S1002S1005 S1006S1004

S1001

C10

12

C10

10

C10

05

S1202

W1201D1201

W12

03

RE

IR

GN

D GN

D

V+5

FL

V+1

3SW

FLS

TB

LED_DVD

VWG2489

VD

D

GN

D

GN

D

KE

Y2

ACP-BS

OPEN/CLOSE

VWG2493

IR

STOP

VD

D

FLS

TB

LED

CO

NTA

CT

SID

E

(HDD)

KIRB ASSY

VWG2490

CONTACT UPPER SIDE

FLD

C+

(DVD)

PC

V+5FLV+13SW

FLD

C-

ACP-BS

FL-2

8V

CONTACT SIDE

PLAY

GN

D

VWG

LED

_HD

D

PC

REC STOP

VWG2508

DVD(H)DISC NAVI(S)

HDD(H)

FL-2

8V

V+5

FLV+5

FL

GN

D

GN

D

DISC HISTRY(S)

POWER

GN

D

V+1

3SW

VD

D GN

D

OPEN/CLOSE RE

LED_HDD

KE

Y1

VWG

REC

CONTACT UPPER SIDE

IR

STOP

FLD

C+

V+5

FL

VD

D

LED

IR

IC12011 7

119

71

332791

R

SIDE A

D E

KIRB ASSYE

FLKY ASSYD

CN201B

CN1001

CN

1201

CN

1002

(VNP1962-C)

(VNP1962-C)

1 2 3 4

C

D

F

A

B

E

3

S1006

CC33

63

5 6 7 8

7

6

5

4 3

2 1

7

6

5

4

3

2

1

1

2

3

4

7 1131

41 49

KN1301

JA1301

W1300

W1301 JA1302

W1021

W10

18

W10

23

W10

24

W10

20

JA1401

CN1401

W10

22

CN1301

W1302

W10

19

W10

06

W1027

W10

05S1007 S1008

W1303

MODE (H)

REC MODE (S)

DUBBING

VD

D

VW

V

(+)(-)

ONE TOUCH

L

R

MODE (H)

C

VWV2004Rch

S_DET

(+)(-)

CONTACT SIDE

VWV

FRJB ASSY

S-VideoVideo Lch

DV

JB A

SS

Y

ACP-BS

VD

D

GN

D

GN

D

FLKY ASSY

GN

D

FLD

C+

GN

D VD

DV

DD

ONE TOUCH

GN

D GN

D

GN

D

GN

D

GN

D

J

REC MODE (S)

VDD

DUBBING

FC

FLPON

VW

V2

00

6

ACP-BS

R

7 1

1 13

4941

SIDE A

IFD

FRJB ASSYF

DVJB ASSYI

CN705B

CN1301

CN5102C

CN

1401

(VNP1962-C)

(VNP1962-C)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

C10

18C

1017

R10

10

R10

12

R10

16V

DD

DVR-520H-S64

1 2 3 4

R13

03

R13

02

R1304

R13

12

C13

06

R15

01

C13

08R

1311

C13

09

R13

08

R13

10

R13

07

R13

01

C13

01

R1504

R1503

D13

02

C15

02

C15

00 R15

00

C1303

C10

14

R15

02

R13

05

C10

01Q1009

R10

31

Q10

08

R10

33R

1032

R10

30

R10

29Q

1007

R10

09

Q1002

R10

08

Q1001

R13

09

C13

05

D13

03

R1401

R13

06

R14

02

D13

01

C13

04

C13

02

D13

04

V

ACP-BS

R

(+) (-)

GN

D

S_DETLF

TP

A

XTPA

LF

CLF

Video

Rch Lch S-Video

CONTACT

VDD

TP

B

XT

PA

TPBXTPB

GND

TPA

XTPB

GN

D

GN

D

VD

D

GN

D

C Y

GN

D

FLPON

FLD

C+

GN

D

B

SIDE

CL

R

L

Q1009

Q1008

Q1007

Q1002

Q1001IC1001

1 7

13

1

R

4149

(VNP1962-C)

(VNP1962-C)

SIDE B

IFD

FLKY ASSYD

FRJB ASSYF

DVJB ASSYI

CN1301

CN

1401

1 2 3 4

C

D

F

A

B

E

R15

00Q

1008

R10

29

(-)

N

FLD

C+

41

65

5 6 7 8

44

34

33

2322

12

11

1

R12

06

C1206

C1204

R12

01

C1202

Q12

02R

1204

R1211

R1210

D12

04

R12

09

R12

05R1208

C1205

R10

17

R12

07

C10

20

R1212

R12

14R

1203

C1207 Q12

01

C10

19

C10

18C

1017

C1007

R1213

C12

01

Q10

07

R10

02C

1004

R10

07

R10

10

R10

12

R10

16

R10

01C

1003

R10

06

C1013

C10

02

R10

15

R10

14

R10

11

R10

13

R10

05

C10

11

C10

06

C10

09

IC1001

D12

02

R12

02

R1034

R10

35

C1021

OPEN/CLOSE

GN

DG

ND

ACP-BS

V+5FL V+13SW

FLDATA

GN

D

FLD

C+

KIRB ASSY

REC REC STOP

ONE TOUCHDUBBING

IR

(HDD)

LED_HDD

IR

IR

LED

REC MODE (S)

MODE (H)

IR

LED_DVD

VWG2490

GN

D

A

B

LED

_HD

D

KE

Y1

GN

D

V+13SW

POWER KEY1_2

V+5

FL LED

_DV

D

IR

LED

_HD

D

LFDVD(H)DISC NAVI(S)

HDD(H)DISC HISTRY(S)

GN

D

V+1

3SW

FL-

28VFLKY ASSY

VWG2489V

DDK

EY

2

LED

_DV

D

KE

Y2

V+5

FL

KE

Y1

FLD

C+

C

GN

DG

ND

V+5

FL

V+5

FL

GN

D

VWG2493

FLS

TB

GN

D

FLPON

GN

D

VD

D

GN

DV

+5

E

(DVD)

GN

D

LED_DVD

D

GN

D

FLCLK

FL-

28V

LED

_HD

D

V+

13S

W

FLD

C-

LED

E

VWG****

VD

D

A

IR

KE

Y1_

2

FLS

TB

PLAYSTOP

VWG****VWG2508

Q1202

Q1201

7 1

191

17

192733

1

44

34

33

2322

11

12

R

(VNP1962-C)

(VNP1962-C)

D E

SIDE B

KIRB ASSYE

CN1001

CN

1201

CN

1002

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S66

1 2 3 4

4.5 SDEB ASSY

44

3433

23

22

1211

1

151

W40

9

W415

C40

0

W408

C403

W41

1 W41

2

C412 C401

W41

0

KN402

W407

C408C417 C416

C41

5

C41

0

C40

6

W401

W41

4

W41

3 CN

403

W406

W405

W403

W402

X40

0

W404

KN401

GND

VWV

GN

D

GND

SIDE

4/4CONTACT

GND

V+6SW

SDEBVNP1970-A

V+

9

SIF

V+

6SW

GN

D

V+

6SW

SIF

GND

SDA

GND

GND

DCTRI

V+6SWGND

STBYQXRESET

4L

V+9

SCL

4RV+9

VWV2033

V+6SW

V+6SW

PC

STBYQ GNDGND

ACP-BS

ICT FC

15

1

R

SIDE A SIDE A

G G

SDEB ASSYG

CN

402

B

CN

403

(VNP1970-A)

1 2 3 4

C

D

F

A

B

E

67

5 6 7 8

IC401

Q403

Q404Q405

Q402

Q401

Q400

Q406

C413

C420

R403

R410R411

L400

R408

C419

C404

R407Q406

Q400

R401

R400

C421

Q401

R422

C437

C435

C402

R406

R415

R420

R412

R416

Q402

L403

C431

C430

C422

Q405

D400

C428

C429

C438

Q404

C427

C407

C409

R402

C426

R409

C405

R405

R404

C414

C424C423

Q403

R413

L401

L402

R421

C434

C433

C411

R414

C418

C436

R423R424

IC401

D401

C425

L404

R419

C432

R426

R418 R428R425

C439

R427 C440R429

R417

V+6SW

XR

ES

ET

4R

4L

SCL

SIF V+

6SW

STBYQ

GND

GND

SDA

VWV****VWV2033

GND

DCTRI

GND

V+9

GND V+

9

4L

GN

DV+6SW

GND

SIF

V+

6SW

4RG

ND

V+6SW

GND

GND

STBYQ

GNDV+6SW

V+9

SIF

23

3334

441

11 12

22

LF

115

SIDE B SIDE B

G G

SDEB ASSYG

CN

403

(VNP1970-A)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S68

1 2 3 4

4.6 POWER SUPPLY UNIT

SIDE A SIDE A

H H

POWER SUPPLY UNITH

CN104B

CN

201

CN4001C

CN

202

toR7R DRIVE ASSY

CN

203

1 2 3 4

C

D

F

A

B

E

69

5 6 7 8

5. PCB PARTS LIST Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.When ordering resistors, first convert resistance values into code form as shown in the following examples.Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%).

Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).

5 6 14 7 3

R 5 01 R 0

5 6 2 1

NOTES:

560 Ω47k Ω0.5 Ω1 Ω

RD1/4PU JRD1/4PU JRN2H KRS1P K

56 x 10 1

47 x 10 3

R501R0

561473

5.62k Ω RN1/4PC F562 x 10 1 5621


LIST OF ASSEMBLIES NSP 1..FLKB ASSY VWM2304 2..FLKY ASSY VWG2489 2..KIRB ASSY VWG2521 2..FRJB ASSY VWV2004 2..DVJB ASSY VWV2006

NSP 1..JACB ASSY VWM2257 2..JCKB ASSY VWV2024 2..ATHB ASSY VWV2002 2..ATWB ASSY VWV2005

1..TUNB ASSY VWV20031..MAIN ASSY VWV20131..SDEB ASSY VWV2033

>1..POWER SUPPLY UNIT VWR1381


ATUNB ASSYSEMICONDUCTORS

IC302 TDA9818TSQ302, Q308, Q319 2SA1576AQ300, Q304, Q306, Q307 2SC4081Q310, Q312 2SC4082Q305, Q315 DTA124EUA

Q311 RN1903Q301 RN4903Q303, Q313 UMF21ND300 1SS355D302 1SS356

D301 UDZS33B

COILS AND FILTERSL304 INDUCTOR ATH1109L301, L303, L306 INDUCTOR CTF1399L316 LCKAW330J2520L305 LCKAWR22J2520L311, L314 LCKAWR47J2520

L307 LCYA150J2520L309 LCYAR68J2520F306 SAW FILTER VTF1177F305 SAW FILTER VTF1179F304 IF TRAP FILTER VTF1180

F303 IF TRAP FILTER VTF1181F301 TRAP FILTER VTF1183L315 VCO COIL VTL1164

CAPACITORSC306 CCSRCH102J50C333, C345 CCSRCH150J50C339 CCSRCH220J50C343 CCSRCH270J50C315, C316 CCSRCH330J50

C325 CCSRCH7R0D50C344 CCSRUJ4R0C50C301 CEAT100M50C308 CEAT102M6R3C303 CEAT330M25

C313, C324 CEAT471M6R3C336, C337 CKSQYB225K10C332, C334, C335, C340, C341 CKSRYB102K50C322, C323, C327 CKSRYB103K50C329 CKSRYB104K16

C304, C305, C328, C331 CKSRYB222K50C338 CKSRYB224K10C307, C326, C330 CKSRYF104Z25C311 CKSRYF104Z50

RESISTORSR309 RS1/10S0R0JR305 RS1/10S150JVR300 (10k) VCP1156Other Resistors RS1/16S###J

OTHERSCN300 19P Socket AKP7073300 SCREW PLATE VNE1948U301 TV TUNER PACK VXF1023

BJCKB ASSYSEMICONDUCTORS

IC504 BA4558F-HTIC204 BR24L32F-WIC801 LA7213IC501 LA73026AVIC701 LA73033M

IC702 LC75342MIC806-IC808 MM1501XNIC703 MM1504XNIC503 MM1511XN

> IC101 MM1565AF

> IC103 NJM78M09DL1AIC202 PEG035B


DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S70

1 2 3 4

> IC102 PQ1K333M2ZPIC201 PST3245IC203 RS5C372A

IC803 TA1287FGIC205 TC74HCT7007AFIC500, IC502 TC7W53FUIC805 TC7WH123FUIC104 TC7WU04FU

Q502, Q708-Q710, Q803 2SA1576AQ805-Q808 2SA1576AQ107 2SA1577Q102 2SB1238XQ106 2SC1740S

Q101, Q103 2SC2411KQ104, Q110, Q208, Q209 2SC4081Q504-Q506 2SC4081Q108 2SC4097Q206 2SD2114K

Q109, Q203, Q205, Q804 DTA124EUAQ112, Q204, Q207, Q801 DTC124EUAQ702 HN1B04FUQ111 HN1C01FUQ500, Q501, Q703 HN1C03FU

Q202, Q515, Q516 RN1901Q507, Q509, Q511, Q705, Q802 RN2903Q105, Q200, Q201, Q503 RN4903Q513, Q514, Q704, Q707 RN4903Q100 UMF21N

D101 1SR154-400D203 1SS352D102, D201, D205, D500, D504 1SS355D515, D705, D706 1SS355D200, D501-D503, D517 DAN217U

D206, D532, D534 DAP202UD505-D514, D522-D529, D531 DF3A5.6FUD707-D709 DF3A5.6FUD104, D202, D516 RB501V-40D103 UDZS12(B)

D652 UDZS5R1(B)

COILS AND FILTERSL101 LAU100JL701-L703 LAU220JL704 LAU2R2JL102 LAU470JL801 LCYA220J2520

L100 LTA102JL200 CHIP BEADS VTL1081

SWITCHES AND RELAYSRY500 VSR1017

CAPACITORSC153, C239 CCSRCH100D50C205, C226-C228, C718 CCSRCH101J50C759-C761, C817, C819 CCSRCH101J50C212, C504, C505, C529, C531 CCSRCH102J50C771, C775, C779 CCSRCH180J50

C563, C564 CCSRCH220J50C139, C547, C548, C814, C815 CCSRCH221J50C162, C163, C230, C244 CCSRCH270J50

Mark No. Description Part No.C770, C774, C778 CCSRCH390J50C225, C231, C232, C713, C789 CCSRCH470J50

C791 CCSRCH470J50C506-C509, C511, C512, C514 CCSRCH471J50C516, C526, C527, C570, C571 CCSRCH471J50C574, C575, C741, C742 CCSRCH471J50C159 CCSRCH561J50

C780 CCSRCH680J50C215 CCSRCH681J50C129, C130, C133, C134, C148 CEAL101M10C164 CEAL101M10C137 CEAL101M6R3

C150 CEAL220M16C553, C554, C556, C557 CEANP100M16C560, C561 CEANP100M16C140, C157, C746-C749 CEAT100M50C752-C757, C821-C823 CEAT100M50

C826-C828 CEAT100M50C107, C122, C200, C213, C235 CEAT101M10C543, C651, C723, C731, C736 CEAT101M10C767, C820, C829, C834 CEAT101M10C124, C142, C144, C510, C539 CEAT101M16

C544, C739, C743, C830 CEAT101M16C524, C537, C706-C708, C729 CEAT102M6R3C737 CEAT102M6R3C558 CEAT1R0M50C517-C522, C533, C534 CEAT220M25

C542, C750, C751 CEAT221M16C812 CEAT3R3M50C738, C740 CEAT470M16C126 CEAT471M16C835 CEVW101M10

C709 CEVW220M6R3C549, C565 CKSQYB105K16C110 CKSQYB225K10C160, C224, C523, C538, C555 CKSRYB103K50C559, C562, C567, C765 CKSRYB103K50

C222, C223, C701, C703, C705 CKSRYB104K16C710, C712, C714-C717 CKSRYB104K16C719-C722, C724, C726, C727 CKSRYB104K16C804-C806, C836-C838 CKSRYB104K16C568, C781, C784 CKSRYB105K10

C109, C115, C116, C119-C121 CKSRYF104Z25C123, C125, C127, C128 CKSRYF104Z25C131, C132, C135, C136, C141 CKSRYF104Z25C143, C147, C149, C152 CKSRYF104Z25C154-C156, C158, C161 CKSRYF104Z25

C203, C204, C214, C216, C217 CKSRYF104Z25C229, C236, C243, C532 CKSRYF104Z25C540, C541, C550, C551, C569 CKSRYF104Z25C652, C728, C730, C744, C745 CKSRYF104Z25C766, C782, C783, C785-C788 CKSRYF104Z25

C801, C807, C809, C813, C816 CKSRYF104Z25C818 CKSRYF104Z25C209-C211, C220, C221 CKSRYF105Z10C233, C234, C240, C525, C545 CKSRYF105Z10C552 CKSRYF105Z10

RESISTORSR578 RS1/10S75R0F


1 2 3 4

C

D

F

A

B

E

71

5 6 7 8

R831 RS1/16S1001FR833, R841 RS1/16S1201FR835 RS1/16S1801FR837, R839 RS1/16S2001F

R842 RS1/16S2200FR744, R747, R750 RS1/16S6800FR519, R542, R543, R548, R560 RS1/16S75R0FR565, R576, R594-R596 RS1/16S75R0FR712, R713, R718, R734-R736 RS1/16S75R0F

R752 RS1/16S75R0FOther Resistors RS1/16S###J

OTHERSCN202 9P FFC CONNECTOR 52045-0945CN705 13P FFC CONNECTOR 52045-1345CN201 19P FFC CONNECTOR 52045-1945CN401 19P PLUG AKP7062CN104 CONECTOR B15B-PH-K

CN105, CN703 CONNECTOR 2P B2B-PH-KJA651 OPT.LINK OUT 8MB/S JFJ1001JA200 JACK RKN1004

>BT200 LITHIUM BATTERY (CR2032) VEM1034JA501, JA502 SCART CONNECTOR VKB1157

JA700 JACK VKB1193CN402 CONNECTOR VKN1191CN702 CONNECTOR VKN1200CN701 32P FFC CONNECTOR VKN1263ST200 BATTERY SOCKET VKX1016

KN701-KN703 WRAPPING TERMINAL VNF1084X100 (4.433619MHz) VSS1176X201 (32kHz) VSS1197X200 (10MHz) VSS1202

CMAIN ASSYSEMICONDUCTORS

IC3101 AK5357VTIC2301 BA7655AFIC1103 CY62148VLL-70ZIIC5204 K4S161622D-TC80IC1101 K4S281632E-TC75

IC1401, IC1421 K4S561632E-TC75IC1001 M65673WG-AIC5002 MM1562FF

> IC4007 MM1603DPIC1301 MT48LC4M32B2TG-7

> IC4004, IC4006 NJM2872F05IC4206, IC5301, IC5321 NJU7013FIC3201 PCM1742KE

> IC4008 PQ015YZ01ZP> IC4002 PQ070XZ02ZP

IC4003 PST3428UIC4005 PST3809UIC3301 SM5950AMIC3402 SM8707KVIC2211, IC2302, IC4101 SN74AHC2G53HDCT

IC3001 TC74LCX541FTIC3002 TC74VHC14FTIC5341 TC74VHC157FTIC1104 TC7SZ126FUIC3403, IC4205, IC5322 TC7WHU04FU


IC3251 UPC4570G2IC5101 UPD72852AGB-8EU-AIC5202 UPD72893BGD-LMLIC1102 VYW2176IC1201 W986416DH-6

Q2101-Q2105, Q2201, Q2203, Q2301 2SA1576AQ2312 2SA1576AQ4000 2SC2411KQ2202, Q2222, Q2241 2SC4081Q2302, Q2311 DTC114EUA

Q2402, Q2403 HN1B04FUQ3201, Q3202 RN1903Q1102 RN4982Q2001 UMF21ND3001, D3101-D3104 1SS355

D3002 RB501V-40D5321 HVC359D5322 HVC362D4201 MA2ZV05D1111 RB521S-30

COILS AND FILTERSF3102, F3401-F3403, F4201, F5101 DTF1069L1001-L1009, L1101, L1102, L1301 DTL1106L1401, L1402, L3301, L5501-L5505 DTL1106L5507, L5508 EMI FILTER DTL1106L5301, L5321 LCYA100J2520

L4202 LCYA1R2J2520F3201 VTF1096

L2101 VTL1067L4201 VTL1079L5103-L5106 VTL1082

CAPACITORSC5311, C5329 CCSRCH100D50C3253, C3258 CCSRCH101J50C5105 CCSRCH271J50C5325, C5327 CCSRCH330J50C3207 CCSRCH331J50

C4208 CCSRCH390J50C5131-C5138 CCSRCH4R0C50C5326 CCSRCH5R0C50C3254, C3257 CCSRCH681J50C5121, C5122 CCSRCH8R0D50

C2208, C2317, C4034, C5322 CEVW100M16C3251, C3255, C4001, C4002, C4004 CEVW101M16C4029, C4037 CEVW101M16C2101, C2221, C2405, C3201, C3204 CEVW101M6R3C3206 CEVW101M6R3

C2301 CEVW220M6R3C1061, C3301, C4022 CEVW221M4C3106 CEVW2R2M50C5321 CEVW470M16C2308, C3102, C3107, C4003, C5341 CEVW470M6R3

C5301 CEVW4R7M35C2220, C2243 CEVWNP100M10C1031, C1032, C1503-C1506 CKSQYB104K16C2204, C4206, C5309 CKSQYB105K10C1901, C4014, C4019, C4033, C5006 CKSQYB225K10

C1004, C1012, C1014, C1029, C1034 CKSRYB102K50C1040, C1044, C1049, C1051 CKSRYB102K50


DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S72

1 2 3 4

C1110, C1111, C1207, C1208, C1307 CKSRYB102K50C1311, C1313, C1407, C1408 CKSRYB102K50C1427, C1428, C3303, C3408 CKSRYB102K50

C1003, C1027, C1037, C1052, C1109 CKSRYB103K50C1206, C1305, C1308, C1310, C1406 CKSRYB103K50C1425, C2305, C3003, C3004, C4018 CKSRYB103K50C4020, C4207, C5214, C5222, C5224 CKSRYB103K50C1508-C1510, C2311, C4104, C5306 CKSRYB104K16

C4103 CKSRYB223K50C5328 CKSRYB473K25C2202 CKSRYB563K16C1002, C1005, C1007-C1010, C1016 CKSRYF104Z25C1018, C1019, C1021-C1023 CKSRYF104Z25

C1025, C1026, C1028, C1030, C1035 CKSRYF104Z25C1038, C1041, C1042, C1047, C1102 CKSRYF104Z25C1105, C1106, C1108, C1114, C1202 CKSRYF104Z25C1204, C1302, C1304, C1312, C1402 CKSRYF104Z25C1404, C1422, C1424, C2102-C2106 CKSRYF104Z25

C2201, C2206, C2210, C2222, C2241 CKSRYF104Z25C2302, C2306, C2319, C2406, C2407 CKSRYF104Z25C3101, C3105, C3108, C3202, C3203 CKSRYF104Z25C3205, C3252, C3256, C3302 CKSRYF104Z25C4006-C4008, C4010, C4012, C4013 CKSRYF104Z25

C4017, C4021, C4024-C4026, C4032 CKSRYF104Z25C4202, C4203, C4209, C5113, C5118 CKSRYF104Z25C5120, C5125-C5127, C5204, C5215 CKSRYF104Z25C5218, C5225-C5228, C5230, C5308 CKSRYF104Z25C5310, C5323, C5342, C5343 CKSRYF104Z25

C1001, C1006, C1048, C1103, C1107 CKSRYF105Z10C1203, C1205, C1209, C1303, C1306 CKSRYF105Z10C1309, C1403, C1405, C1409, C1423 CKSRYF105Z10C1426, C1429, C3001, C3006 CKSRYF105Z10C3404-C3407, C4027, C4030, C4105 CKSRYF105Z10

C4107, C4201, C4401, C4501, C5110 CKSRYF105Z10C4028 (4.7uF/6.3V) DCH1200C3402, C3403, C4015 (10uF/10V) VCG1045C1060 (150uF/4V) VCH1246VC4201 (10pF) VCM1012

RESISTORSR1025, R1026, R1042-R1046 RAB4CQ103JR1048-R1051, R1054, R1068, R1069 RAB4CQ103JR1072, R1073, R5218-R5221 RAB4CQ103JR5229, R5230, R5247, R5249-R5252 RAB4CQ103JR5255, R5258, R5259, R5273-R5275 RAB4CQ103J

R5289, R5290 RAB4CQ103JR1408-R1411 RAB4CQ220JR4401, R4404, R4410, R4416, R4417 RAB4CQ223JR4423, R4502, R4506, R4512 RAB4CQ223JR4518, R4519, R4525 RAB4CQ223J

R1114-R1117, R4405-R4408, R4436 RAB4CQ330JR4507-R4510, R4538 RAB4CQ330JR1303-R1310, R1404-R1407 RAB4CQ560JR1423-R1426 RAB4CQ560JR1203-R1206 RAB4CQ680J

R5103 RN1/16SE5101DR5108 RN1/16SE9101DR1207, R1502, R1507, R2017, R3002 RS1/10S0R0JR3102, R3201, R3252, R4001, R4006 RS1/10S0R0JR4009, R4014, R4016, R4108, R4109 RS1/10S0R0J

Mark No. Description Part No.R5209, R5322 RS1/10S0R0JR4019 RS1/10S1001DR5321 RS1/10S101JR1501 RS1/10S2202FR4020 RS1/10S5600D

R4013 RS1/16S1001FR3254, R3266 RS1/16S1002FR4012 RS1/16S1200FR3253, R3265 RS1/16S1201FR4011 RS1/16S1501F

R1021, R1023 RS1/16S2201FR3251, R3269 RS1/16S2202FR2105, R2106, R2111, R2112, R2115 RS1/16S3300FR4018 RS1/16S3600DR5104-R5107 RS1/16S56R0D

Other Resistors RS1/16S###J

OTHERSCN5102 7P FFC CONNECTOR VKN1411CN4401, CN4501 40P FFC CONNECTOR VKN1811CN1901 7P FFC CONNECTOR VKN1812CN4001 8P FFC CONNECTOR VKN1813CN3001 24P FFC CONNECTOR VKN1814

CN2001 32P FFC CONNECTOR VKN1815KN3 EARTH METAL FITTING VNF1109X4201 (27.000MHz) VSS1146X5101 (24.576MHz) VSS1184X4102 VCXO(27MHz) VSS1195

DFLKY ASSYSEMICONDUCTORS

IC1001 PT6315

COILS AND FILTERSL1001 LAU220J

SWITCHES AND RELAYSS1001, S1002, S1004-S1009 VSG1024

CAPACITORSC1012 CEJQ101M6R3C1010 CEJQ220M35C1001-C1004, C1020 CKSRYB103K50C1006, C1009, C1013 CKSRYF104Z25C1011 CKSRYF105Z10

RESISTORSOther Resistors RS1/16S###J

OTHERSCN1001 19P FFC CONNECTOR 9607S-19FV1001 FL TUBE VAW1081CN1002 CONNECTOR VKN1183 FL HOLDER VNF1129

EKIRB ASSYSEMICONDUCTORS

Q1201, Q1202 DTC124EUAD1201 SLR-343BBTD1203 SLR-343DC

SWITCHES AND RELAYS


1 2 3 4

C

D

F

A

B

E

73

5 6 7 8

S1201-S1203 VSG1024

CAPACITORSC1201, C1202, C1204 CKSRYF104Z25

RESISTORSR1212 RS1/16S101JR1201 RS1/16S222JR1202 RS1/16S332JR1203 RS1/16S562JOther Resistors RS1/10S###J

OTHERSIC1201 REMOTE RECEIVER UNIT RPM7140-H9CN1201 CONNECTOR VKN1183

FFRJB ASSYCAPACITORS

C1308, C1309 CCSRCH471J50

RESISTORSR1501, R1502 RS1/10S0R0JOther Resistors RS1/16S###J

OTHERSCN1301 13P FFC CONNECTOR 52492-1320JA1301 YC CONNECTOR (VERTI) VKB1190JA1302 3P JACK (VERTICAL) VKB1206KN1301 WRAPPING TERMINAL VNF1084

GSDEB ASSYSEMICONDUCTORS

IC401 MSP3417GQ401, Q404-Q406 2SA1576AQ402, Q403 2SC4081D401 1SR154-400D400 1SS355

COILS AND FILTERSL400 CTF1399L402, L403 LCYA150J2520L404 LCYA4R7J2520L401 LCYA8R2J2520

CAPACITORSC421, C429, C433, C434, C437 CCSRCH102J50C424 CCSRCH121J50C431 CCSRCH181J50C439, C440 CCSRCH220J50C423 CCSRCH470J50

C426, C428 CCSRCH560J50C430 CCSRCH680J50C427, C432 CCSRCJ3R0C50C408, C416 CEAT100M50C403, C415, C417 CEAT101M10

C400, C406, C412 CEAT101M16C410 CEAT3R3M50C414, C420, C436 CKSRYB103K50C419, C435 CKSRYB472K50C404, C405, C407, C409, C411 CKSRYF104Z25

C413, C418, C422, C425 CKSRYF104Z25C438 CKSRYF105Z10

Mark No. Description Part No.RESISTORS

R406, R407 RS1/10S0R0JR402 RS1/10S100JOther Resistors RS1/16S###J

OTHERSCN403 CONNECTOR VKN1191401, 402 SCREW PLATE VNE1948X400 (18.432MHz) VSS1189

HATWB ASSYOTHERS

CN14 40P ATA CONNECTOR VKN1816CN13 40P FFC CONECTOR VKN1879

IATHB ASSYOTHERS

CN12 40P ATA CONNECTOR VKN1816CN11 40P FFC CONECTOR VKN1879

JPOWER SUPPLY UNITThere is no service part.

KDVJB ASSYRESISTORS

Other Resistors RS1/16S###J

OTHERSJA1401 DV TERMINAL VKB1207CN1401 CONNECTOR VKN1183


DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S74

1 2 3 4

6. ADJUSTMENT6.1 TUNB ASSY ADJUSTMENT

The solder land named "AFT" (upper side of JCKB ASSY)

The solder land named "AGC" (upper side of JCKB ASSY)

1.90V ± 0.20V Note1

3.80V ± 0.20V 2

Terrestrial tuner input /through output.Any channel, RF Input ≥ 60dBuSystem = B/G, I or D/KAFT = OFFNote1

Terrestrial tuner input Ch = E9(203.25MHz), Video= Blackburst RF Input = 60.0 ± 1.0dBuSystem = B/G, I or D/K

Note 1 : The adjustment spec. is defined without the thermal drift after the power on. Therefore, start the adjustment at least 10 minutes after the power on.

No. Adjustment Name Adj. Point Measurement Point Adjustment Value Adjustment State

1

VCO freerun frequency (AFC voltage) adjustment

AGC start point adjustment

L315

VR300

191

6 4

321

L313

C328F301

R347

R35

1

C31

0

L307

R345

F30

4

R32

0

F302

F306

C30

1

R36

1

C30

9

R329

F305

R317

R31

9

R353

D30

3

VR300

R350

R35

2

C30

2

R33

7

Q314

R346

C31

9

KN

300

R359

R357

R36

0

R356

Q319

R358

Q31

6

R33

3

C32

4

R323

C300 L306

L304

C30

8

CN300

Q301

C31

7

Q311C31

4

C323

C31

3

F30

3

C30

3

R354R33

2

R32

4

Q315

U301

R32

5

Q307

L315

PC

AGC Adjust

GND

C

V+5TUVNP1965-A

AFC Adjust

PYKC F4XGND

GND

V+6E

AGC

TUNB

GND

C B2 E2

E B C2

B E

4/4

VWV

LF

ICT FC191

R

NP

1

OUT

GND

IN

754

1

58

41

91

87

59

29

1

5830

116 88

191

85

4 1

151

191

1

85

4 1

58

41

85

4 1

10 6

51

3

4 6

1

80 61

6041

4021

201

32

1

1815

14

13 1210

9

87

5

43

21

13 1

3

4 6

1

24

1

15 1

51

OU

T

GN

D

IN

981 16

85

4 1

3

4 6

1

3

4 6

1

3

4 6

1

3

4 6

13

4 6

1 3

4 6

1

2 1

14 5

7

14 5

8

91

129

30 58

59

87

88116

1 3

45

191

14

58

151

19

1

2 1

4

5

1

8

58

41

14

58

NP

NP

-

+

NP

NP

NP

NP

13

4 6

120

21 40

41

60

6180

32

1

1 3

45

T

113

NP

4 6

3 1

24

1

115

18 9

16

14

5 84 6

3 1

64

3 1

4 6

3 1

13

4 6

13

4 6

13

4 6

NPN

P

NP

ICT FC

LF

R

R83

0

R831

C13

4

C12

9

C13

0

D10

1

C124

CN105

C13

7C

133

L101

C12

6Q

102

L100

C12

2 C114

C112

C111

IC103

C11

6 C115

R100

C10

7

IC101C110

C109

R81

5

R80

9

R813

R81

2

R80

8

R80

3

C78

4

R80

1

R80

2

C242C241

BT200

R284R283

IC20

4

C235

X201

R279R278

C236

X20

0

R274

C232

R272

C233

R270

R26

9

R271

R265R264

R254

C22

5

C224

C231

R251

R263

R26

2

R260

R258

R259

C22

7

C226R255

R25

6

R253

R252

C22

1

C222

C223

R249

R250

L200

R24

6

R243R242

C22

0

R23

8

R239

R24

0

R244

R23

6

CN202

Q207

R234

R235

Q208

R22

6

R23

1

R22

8

R229

R230

C21

8C

219

Q20

6

R22

7

Q205

R224

C217

R225

IC202

JA200

C213

C212C211

R216

R211

R221R210

R208

R21

8

R219

C20

7

R214

R212R213

R206

R20

9

Q204

C214

C210

R207

C209

R205

IC201

CN201

C20

4

Q202

R20

3

C203

C805C20

0

D200

R119

C15

5R

118

R12

4

C159

R12

8

R129

R127

C157

Q111

C15

8

R123

R12

1

R12

0

C156

R117

R116

L102

R114

C153

C15

4

X10

0

IC10

4

C161

R130C160

R13

1

C151

C14

8

C14

6

C15

0

Q108C147

R11

2

C149

C14

5

D10

3

R113

R11

1

D10

2 Q10

5

Q106

C144

R110

C14

2

C14

1

C143

C140

R247

D20

5

R293

R82

4

C16

4

CN104

R807

Q107

Q112

CN

401

CN703

KN703

KN702

KN

701

C755

C74

9

C75

2

C74

7

C743

C748

C74

6

C739

C75

7

C75

4

R55

6

C57

6

IC50

0

D50

3

D502

C53

2

R575

R555

C565

R570

C54

8

Q505

Q504

C54

2

C549

R559

C54

7

R558

R557

C546

C541

R568R569

C56

3

C56

4

IC504

C544

R57

9

C56

6

C56

9

R56

4

IC502

C55

1

C722

C717

C716

C554

C553

C519C522

C521

C520

C518

C517

C534

C533

C52

3

C537

C524

R53

4

R55

1

C539

C510

R51

6

R53

3

R53

2

R53

0

R53

1

R50

5R

518

R51

7R

504

C50

8C

509

R51

3

Q500

R51

2

R54

5

R543 R561R560

R56

2

R54

4

R519R520 R542

R52

5

R526 Q501 R524

R527

R51

4

R515

R52

9R528

R523R52

2

R53

7

R53

8

R54

0

R53

9 R53

5

R53

6

C52

6

C52

7

R511C507

C506

R510

R50

8

R501

R50

9

R502

R54

6

R54

7 R54

8

C70

6

C70

7

C70

8D501

RY500

R57

8 R56

6

R552 R503

Q502

C55

8

C557

C556

C561C560

R58

1

R58

0

IC503

C54

3

C550

C56

7

C56

8

C726

C72

7

C73

5

C723

C736

C725

C720C719

C724

C721

C711C712

C710

IC701

C70

3C

702

C70

1

Q702

R711

C71

3

R70

9

CN701

R710

R706

C718

R70

7

C70

9

JA700

Q703

R723

R732

R724

C74

0

C751

D706

D70

5

C750

C73

8C651

C65

0

IC650

R654

JA651

R651

C75

6

C75

3

R73

0

C72

9 C73

7

C715C714

C705

C730

C731

C73

2R

714

R71

5

C73

3

C73

4R

716

Q70

0

R703

R70

1 R70

0

R702

C806

C767

C76

6

C801

R73

7

C77

1

R743

L701 C770

C769

C76

8

Q708

R74

2

C804

C803

C80

2

L702

C773

R746

C77

2

C77

5

C774

R74

5

Q709

L703

C777

R749

C77

6

C77

9

C778

R74

8

Q710

C57

0

C57

1

C573

C572

R58

3

R582

C78

5

CN705

R75

2

L704

C78

0

D51

0

D51

1

D50

6

D50

8

D51

4

D51

3

D50

5

D50

7

D50

9

D51

2

D52

8D

526

D52

9

D52

4

D52

3

D52

7

D52

5

D53

0

D53

1

D52

2

C165

JA502JA501

Q507

IC703

C781

C782

CN702

C783

C57

7

Q808

C788C787

C786

R13

4

C807

C808

C809

C810

C811C812

C813

C814

C81

6C

817

C81

8

C81

9

C820

C821

C822

C823

C824

C82

5

C826

C827

C828

C829

C830

C83

1

C83

2

C83

3

C834

C83

5

CN402

D206

D532

D534

D80

1

IC801

IC80

2

IC803

IC805

IC80

6

IC807

IC808

IC80

9

IC81

0

IC81

1

L801

L804

Q50

9Q51

1

Q513Q514

Q51

5

Q516

Q801

Q802

Q80

4

R21

5

R58

4

R58

5R

586

R58

7

R58

8R

589

R59

0R

591

R59

2

R59

3

R804

R805

R80

6

R81

0

R811

R81

4

R81

6

R81

7

R818

R819 R820

R82

1

R822

R823

R836

R835

R82

7

R82

8

R82

9 R83

4

R83

2

Q807

Q806

Q803

VR801

VR802

VR803

R833

Q805

L103

C229

C815

R837R838

R839R840

R841R842

R84

3

D707

D708

D709

R597

C792

R29

6

C578

D65

2

D651

C83

8

C83

6C

837

R602

R603

R731

R82

5

R826

C24

6

GN

DA

GNDA

GND

GND

V+

15E

V+

5VI

V+

6SW

PG

M

VP

P

SC

LK

XD

LRS

T

VD

D

TX

D

RX

D

BU

SY

GN

D

V+

5VI

V+9

V+

5SC

V+13SW

V+

12S

C

V+

5M

V+6SW

LineKnife

VWV2030-

CONTACTSIDE

GND

GN

DA

V+

13S

W

V+

12S

C

V+

9

V+3.3E

VWV

PC

CR_ADJ

Y_ADJ

CB_ADJ

AFT

AGC

GN

DC

SY

NC

ING

ND

NC

GN

DA

ALM

toT

GN

DA

AR

Mto

TG

ND

AR

Mto

T

GN

D

GM

toT

GN

DC

Mto

T

GN

DY

/VM

toT

GN

D

CLP

OU

TV

+5V

O

V+6E

V+

6SW

V+

9V

GN

DA

V+

13S

W

GN

D

SD

ET

2Y C V R L

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

D


PC

MO

UT

GN

D

GN

D

FLD

AT

A

V+

5EG

ND

GN

D

FLPON

V+

13S

W

FLC

LKF

LST

BN

CK

EY

1 IRK

EY

2

GN

DLED

_DV

DLE

D_H

DD

FLD

C+

FLD

C-

FL-

28

GN

DV

+6S

WS

TB

YQ

XR

ES

ET

DC

TR

IS

CL

SD

AV

+9

GN

D4L G

ND

4R GN

D

SIF

GN

D

P_O

N

FLO

NF

LDC

-

FL-

28V

FLD

C+

GN

D

EV

+37

V

GN

D

EV

+6V

GN

D

SW

+13

V

GN

D

SW

+6V

GN

D

EV

+15

V

GN

D

V+

13S

WB

UP

V+

5VI

MU

TE

XR

ST

LAM

UT

EX

525P

RA

MU

TE

MR

ST

GN

DP

CM

OU

T

GN

DH

SM

toT

P_C

ON

TS

SM

toT

GN

DS

ST

toM

GN

DH

ST

toM

GN

DA

SC

K

GN

DS

PD

IF

GN

DB

Mto

T

AG

CC

TL

GN

DA

RT

toM

GN

DA

LTto

MG

ND

C/C

bTto

MG

ND

Y/V

Tto

MG

ND

CrT

toM

JCKB

VWV2024-

100m

m96

mmVCONTACT

SIDE

CONTACTSIDE

CONTACTSIDE

CONTACTSIDE

CONTACTSIDE

VWV2031-VWV2040-

MDK337V-0 N

JUST

SY

NC

AF

T

XR

ES

ET

_IN

FA

NP

WM

P_CONT

XRESET

SC

L

SDA

CVBS

C/Cb_IN

Y_IN

AR_IN

AL_IN

Cr_IN

Y/V

CAL

AR

E

C

B

C

B C2

E2B2

E BE C2

E2B2C

NP

VNP1978-A

1

OUT

GND

IN

754

1

58

41

91

87

59

29

1

5830

116 88

191

85

4 1

151

191

1

85

4 1

58

41

85

4 1

10 6

51

3

4 6

1

80 61

6041

4021

201

32

1

1815

14

13 1210

9

87

5

43

21

13 1

3

4 6

1

24

1

15 1

51

OU

T

GN

D

IN

981 16

85

4 1

3

4 6

1

3

4 6

1

3

4 6

1

3

4 6

13

4 6

1 3

4 6

1

2 1

14 5

7

14 5

8

91

129

30 58

59

87

88116

1 3

45

191

14

58

151

19

1

2 1

4

5

1

8

58

41

14

58

NP

NP

-

+

NP

NP

NP

NP

13

4 6

120

21 40

41

60

6180

32

1

1 3

45

T

113

NP

4 6

3 1

24

1

115

18 9

16

14

5 84 6

3 1

64

3 1

4 6

3 1

13

4 6

13

4 6

13

4 6

NPN

P

NP

ICT FC

LF

R

R83

0

R831

C13

4

C12

9

C13

0

D10

1

C124

CN105

C13

7C

133

L101

C12

6Q

102

L100

C12

2 C114

C112

C111

IC103

C11

6 C115

R100

C10

7

IC101C110

C109

R81

5

R80

9

R813

R81

2

R80

8

R80

3

C78

4

R80

1

R80

2

C242C241

BT200

R284R283

IC20

4

C235

X201

R279R278

C236

X20

0

R274

C232

R272

C233

R270

R26

9

R271

R265R264

R254

C22

5

C224

C231

R251

R263

R26

2

R260

R258

R259

C22

7

C226R255

R25

6

R253

R252

C22

1

C222

C223

R249

R250

L200

R24

6

R243R242

C22

0

R23

8

R239

R24

0

R244

R23

6

CN202

Q207

R234

R235

Q208

R22

6

R23

1

R22

8

R229

R230

C21

8C

219

Q20

6

R22

7

Q205

R224

C217

R225

IC202

JA200

C213

C212C211

R216

R211

R221R210

R208

R21

8

R219

C20

7

R214

R212R213

R206

R20

9

Q204

C214

C210

R207

C209

R205

IC201

CN201

C20

4

Q202

R20

3

C203

C805C20

0

D200

R119

C15

5R

118

R12

4

C159

R12

8

R129

R127

C157

Q111

C15

8

R123

R12

1

R12

0

C156

R117

R116

L102

R114

C153

C15

4

X10

0

IC10

4

C161

R130C160

R13

1

C151

C14

8

C14

6

C15

0

Q108C147

R11

2

C149

C14

5

D10

3

R113

R11

1

D10

2 Q10

5

Q106

C144

R110

C14

2

C14

1

C143

C140

R247

D20

5

R293

R82

4

C16

4

CN104

R807

Q107

Q112

CN

401

CN703

KN703

KN702

KN

701

C755

C74

9

C75

2

C74

7

C743

C748

C74

6

C739

C75

7

C75

4

R55

6

C57

6

IC50

0

D50

3

D502

C53

2

R575

R555

C565

R570

C54

8

Q505

Q504

C54

2

C549

R559

C54

7

R558

R557

C546

C541

R568R569

C56

3

C56

4

IC504

C544

R57

9

C56

6

C56

9

R56

4

IC502

C55

1

C722

C717

C716

C554

C553

C519C522

C521

C520

C518

C517

C534

C533

C52

3

C537

C524

R53

4

R55

1

C539

C510

R51

6

R53

3

R53

2

R53

0

R53

1

R50

5R

518

R51

7R

504

C50

8C

509

R51

3

Q500

R51

2

R54

5

R543 R561R560

R56

2

R54

4

R519R520 R542

R52

5

R526 Q501 R524

R527

R51

4

R515

R52

9R528

R523R52

2

R53

7

R53

8

R54

0

R53

9 R53

5

R53

6

C52

6

C52

7

R511C507

C506

R510

R50

8

R501

R50

9

R502

R54

6

R54

7 R54

8

C70

6

C70

7

C70

8D501

RY500

R57

8 R56

6

R552 R503

Q502

C55

8

C557

C556

C561C560

R58

1

R58

0

IC503

C54

3

C550

C56

7

C56

8

C726

C72

7

C73

5

C723

C736

C725

C720C719

C724

C721

C711C712

C710

IC701

C70

3C

702

C70

1

Q702

R711

C71

3

R70

9

CN701

R710

R706

C718

R70

7

C70

9

JA700

Q703

R723

R732

R724

C74

0

C751

D706

D70

5

C750

C73

8C651

C65

0

IC650

R654

JA651

R651

C75

6

C75

3

R73

0

C72

9 C73

7

C715C714

C705

C730

C731

C73

2R

714

R71

5

C73

3

C73

4R

716

Q70

0

R703

R70

1 R70

0

R702

C806

C767

C76

6

C801

R73

7

C77

1

R743

L701 C770

C769

C76

8

Q708

R74

2

C804

C803

C80

2

L702

C773

R746

C77

2

C77

5

C774

R74

5

Q709

L703

C777

R749

C77

6

C77

9

C778

R74

8

Q710

C57

0

C57

1

C573

C572

R58

3

R582

C78

5

CN705

R75

2

L704

C78

0

D51

0

D51

1

D50

6

D50

8

D51

4

D51

3

D50

5

D50

7

D50

9

D51

2

D52

8D

526

D52

9

D52

4

D52

3

D52

7

D52

5

D53

0

D53

1

D52

2

C165

JA502JA501

Q507

IC703

C781

C782

CN702

C783

C57

7

Q808

C788C787

C786

R13

4

C807

C808

C809

C810

C811C812

C813

C814

C81

6C

817

C81

8

C81

9

C820

C821

C822

C823

C824

C82

5

C826

C827

C828

C829

C830

C83

1

C83

2

C83

3

C834

C83

5

CN402

D206

D532

D534

D80

1

IC801

IC80

2

IC803

IC805

IC80

6

IC807

IC808

IC80

9

IC81

0

IC81

1

L801

L804

Q50

9Q51

1

Q513Q514

Q51

5

Q516

Q801

Q802

Q80

4

R21

5

R58

4

R58

5R

586

R58

7

R58

8R

589

R59

0R

591

R59

2

R59

3

R804

R805

R80

6

R81

0

R811

R81

4

R81

6

R81

7

R818

R819 R820

R82

1

R822

R823

R836

R835

R82

7

R82

8

R82

9 R83

4

R83

2

Q807

Q806

Q803

VR801

VR802

VR803

R833

Q805

L103

C229

C815

R837R838

R839R840

R841R842

R84

3

D707

D708

D709

R597

C792

R29

6

C578

D65

2

D651

C83

8

C83

6C

837

R602

R603

R731

R82

5

R826

C24

6

GN

DA

GNDA

GND

GND

V+

15E

V+

5VI

V+

6SW

PG

M

VP

P

SC

LK

XD

LRS

T

VD

D

TX

D

RX

D

BU

SY

GN

D

V+

5VI

V+9

V+

5SC

V+13SW

V+

12S

C

V+

5M

V+6SW

LineKnife

VWV2030-

CONTACTSIDE

GND

GN

DA

V+

13S

W

V+

12S

C

V+

9

V+3.3E

VWV

PC

CR_ADJ

Y_ADJ

CB_ADJ

AFT

AGC

GN

DC

SY

NC

ING

ND

NC

GN

DA

ALM

toT

GN

DA

AR

Mto

TG

ND

AR

Mto

T

GN

D

GM

toT

GN

DC

Mto

T

GN

DY

/VM

toT

GN

D

CLP

OU

TV

+5V

O

V+6E

V+

6SW

V+

9V

GN

DA

V+

13S

W

GN

D

SD

ET

2Y C V R L

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

D


PC

MO

UT

GN

D

GN

D

FLD

AT

A

V+

5EG

ND

GN

D

FLPON

V+

13S

W

FLC

LKF

LST

BN

CK

EY

1 IRK

EY

2

GN

DLED

_DV

DLE

D_H

DD

FLD

C+

FLD

C-

FL-

28

GN

DV

+6S

WS

TB

YQ

XR

ES

ET

DC

TR

IS

CL

SD

AV

+9

GN

D4L G

ND

4R GN

D

SIF

GN

D

P_O

N

FLO

NF

LDC

-

FL-

28V

FLD

C+

GN

D

EV

+37

V

GN

D

EV

+6V

GN

D

SW

+13

V

GN

D

SW

+6V

GN

D

EV

+15

V

GN

D

V+

13S

WB

UP

V+

5VI

MU

TE

XR

ST

LAM

UT

EX

525P

RA

MU

TE

MR

ST

GN

DP

CM

OU

T

GN

DH

SM

toT

P_C

ON

TS

SM

toT

GN

DS

ST

toM

GN

DH

ST

toM

GN

DA

SC

K

GN

DS

PD

IF

GN

DB

Mto

T

AG

CC

TL

GN

DA

RT

toM

GN

DA

LTto

MG

ND

C/C

bTto

MG

ND

Y/V

Tto

MG

ND

CrT

toM

JCKB

VWV2024-

100m

m96

mmVCONTACT

SIDE

CONTACTSIDE

CONTACTSIDE

CONTACTSIDE

CONTACTSIDE

VWV2031-VWV2040-

MDK337V-0 N

JUST

SY

NC

AF

T

XR

ES

ET

_IN

FA

NP

WM

P_CONT

XRESET

SC

L

SDA

CVBS

C/Cb_IN

Y_IN

AR_IN

AL_IN

Cr_IN

Y/V

CAL

AR

E

C

B

C

B C2

E2B2

E BE C2

E2B2C

NP

VNP1978-A

TUNB ASSYA

JCKB ASSYB

SIDE A

SIDE A

VR300L315

Fig.1 Adjustment Points (TUNB ASSY)

Fig.2 Measurement Points (JCAB ASSY)

* It is not necessary to adjust the ASSY normaly when exchanging the ASSY. But the adjustment is necessary when exchanging the Tuner Module and IC302 VIF/SIF IC.

Land "AGC"

Land "AFT"

1 2 3 4

C

D

F

A

B

E

75

5 6 7 8

6.2 MAIN ASSY ADJUSTMENT

MAIN ASSY IC3402 Pin8 (XTO)

(SM8707KV)

No. Adjustment Name Adj. Point Measurement Point Adjustment Value Adjustment State

1 27.000000MHZ ± 130Hz

Master clock free-running adjustment(Clock system adjustment) VC4201 No signal input

* It is not necessary to adjust the ASSY normaly when exchanging the ASSY, but confirm the data.

IC3402

R5234R5217

C521

0

C520

9

C520

4

C521

4

TP4015

D4002 L5504L5502C5121 C5122 C5124F5101

R5252

17R5251

17R5249

17R5247

17

R511

6

R511

4

R512

2R5

120

IC4007

L5102

L5101

L550171

CN5102

C4033

R5129R5128

R5216

R5215

R5233

C510

1

C5103

C511

2

C5127C512

0

C521

2

C5216

C4032

C5132

C5138

C5137

C5136

TP31TP32 TP38

TP5202

TP5201

C510

2

C5104

C403

4

C5207

L5103

L5104

L5106

L5105

28 28 28 28

16

1732

33

X5101

1 156

157208

R5107

R5108

R5103R5

110

R511

5

R511

7

R512

1

R510

9

R5125 R5126

R526

3R5

262

R526

0R5

257

R525

6

R525

3R5

254

R5232R5231

R5214

L100

4

C105

6 R3312

R107

4

R220

6

R220

7

7 17 17 1

Q22

02 R100

5

L550

7

R4435

R410

1

R5282

R210

9 10552 2R5290TP10

51

C102

8

C102

7

C102

5

C101

6

R5127R5237

R511

3R5

112 R5

132

R513

1

R410

5

C101

1

C410

7

R440

71 2

L100

9

L100

8

R111

1

R1052 R101

2

R5236

R5235

D111

1

R5272

R5106

R5105

R5104

R5130IC52026449

48 1

IC5101

C5226

C5126

C5125

C5110

C5111

C5105

C5217

C5215

C111

4

C4105 R410

8

C1054

C1061

TP51

06

Q1102C4106 R5

2731

7

28

R527

41

7

28

R522

117

28

R522

01

7

28

R521

917

28

R521

81

7

28

R527

517

28

R440

51

7

28

R440

61

72

8

L100

7

C1031

C1032

C1104

CN44

01

R109

0

R1071

R4432

R4429R4428R4

102

R5314

R5313

R5228R5227

R5225

R5224

R5238R5276

R5286

R5277R5287

R5288

R5278R5279R5280

R5281R2114R2116R526

5

R4104R4103

R411

0 R512

3

R512

4

R4106

R4107

R211

2

R2115 R1024R1023

R1022R10213

4

2

1

X410

2

82

71

C5228

C5227

C512

3

C511

9

C511

8

C5113

C101

4

C105

0

C100

4C1

003

C100

2

C100

1

C151

0

C150

9

C150

8

C4102

C410

3

C410

4

R100

9

R410

9

C106

0

TP28TP1041

TP1050

TP10

60

VR2104

IC41

01

14 5

8

VR2105

VR10

01

VR10

02

R5230

17

28

R5229

17

28

R5289

17

28

7 8

R440

8

R230

2

R230

3

R2111

R450

8R4306R4305

TP33

03

C210

4 C105

5

L100

5 R4501 R4503R2252

R4504

R526

1

C521

1C104

2

Q23

11

1 7 1 7R1034

R2105 R2106

R524

8

R524

0

R529

6

R529

5L1102

L100

1R2266

R231

2

R2311

R524

5

R524

6

R523

9R5

244

R5283

R5284R5285

R101

1

R211

3

R100

3

TP1002C4020C4401

C2246

C2265

C521

8

C520

8C104

1

C103

7

C103

4

C2319

C210

6

C210

5

C520

6

TP52

04

Q21

05

Q21

04

C2317

17

28

R52592 8

R52582 8

R52502 8

2 8

R443

617 8

53 104

R524

3

R524

1

R524

2

R4307

R3303

R2313

R2314

R3304

R210

2

R210

3

R5293 R5294C1057

R100

6

C532

9

C5230 C5223C521

3

C522

5

C5222C1044

C1045

C1017

C1018

C1019C210

3

C210

2TP43

04

TP43

05

TP43

06

TP43

07

TP1067

Q2312 Q21

02

Q21

01Q2302

C520

51 7R52551 7

2 8 2 8 R450

717

28

1

2

R230

1

L100

3

L100

6

CN45

01C2204

C105

9

1213

IC33

01CN4301

R3311

R1066

R3307

R223

3R2

235

R3310

R210

7

R2210

R2201R2202R2304R2307

R1031IC5204

82

71

R4510

87

82

71

R45097171

C2301Q2301

Q2201 Q2222

Q21

03

TP14

C532

1

C2101C1039

C1049

C103

6

C103

8

C103

5

C102

9

C103

0

C102

6

C102

4

C1023

C1022

C1021 C1048

C1047

C1012 C1052C1051C1005

C1006

C2222C2209

C220

2

C2306

R100

8

R100

4

D420

1

R4209R4208R4207

R310

4

R310

3

D420

2

6 1 81 31C3102C4027

C401

8C221

0

F400

1

R420

5

R108

0

R420

1

F340

3

C330

1

C420

1

C420

2 F340

1

L5508

L3301

C340

3

124

R3313 R5298 R5297

R5222

R5223

R3306

R3305

R220

4

R4530R4531

R4534R4537

R454

1

R2239R2221

R340

7

R340

3

R340

5

R340

6

R3309

R2227R2205R2203

R2209D4001

IC4008

R341

1

82

71

R453

8

8 2R4304

8 2R4303

8 2R4302

82R1048

82R1045

82R1043

8 5

IC3403

VC4201

23

D4501C3107

C5221

C105

8

R4019

R3102

C220

1

C2205

C5231

C5224

C5229

C421

1

C340

4

C340

5

C3302

C3303

C340

8

C105

3

C104

0

C101

3

C222

1

TP34

01

TP4010TP4202

TP4001

TP4301

TP4302

TP4303

TP15

TP1012

TP1013

TP10

27

TP10

28

TP10

29

TP1030TP10

32

TP1031 TP1033

TP1026

TP1024

Q2203

16 9

C220

8

CN40

01

C222

0

C340

6

C420

9

C420

8

R402

0

IC31

0113

IC42

05 R340

8

R3105

R190

1

R190

3

R190

4

R190

2

R233

1

R233

2

R233

3 R421

0

1

C4014C3402R4213

81Q2204

C3106 TP3403 C402

9

C233

1

C3108

C310

1 C340

7

C402

8

C2206

F420

1

89

L420

1

X420

1

1 8

1 41 7 1 71 7

R233

4

R220

8

R2305

R401

7

R341

0

R3409R3108R3107

R3106

R4211R4212R4206

8

C420

6

R2214

F310

2 TP4201

TP4009

TP4008TP3402

C310

5

C421

0

C420

3

C403

1

C233

2

C233

3

C222

3

R4010

R4015F3402

16 1

4 1IC4206

4 5 IC4004

45

4 5

R401

8

L4202

IC23

31

4 3 R420

2

R420

4

R202

6

R201

9

C231

1

C402

1

Q20

01C2243

IC30

01

R230

6

R240

7

R240

4

R327

0

R327

1

R201

1

R201

2

R201

3

R201

4

R201

5

D310

4

D310

3

D3001 D3002

D310

1

D310

271

CN19

01

C233

4

R2308

R225

4

R225

3

R225

5

R320

5

R3204R3203

R320

2

R3003C3251

R401

4R400

1

R400

9

R201

7C2302

C2241

C2305

C400

6

C4005

C402

4

C402

3

C4013C4207

C2406 C300

4

C2407

F400

3

C240

5

C4004

C3255

TP4002TP4012TP2007

TP4011 TP4005

Q22

41

Q3201 Q3202C230

8

1011

IC22

11

4 5IC

2302

14 5

8

IC4003 IC4005

IC2301

14

5 8

R1905

R3001R3025R3024R3023

R3022

R204

7

R202

7

R202

5R2

040

R400

8

R400

4

R300

2

C4010

C300

1

C3002

TP40TP41

TP42TP48TP49

TP50

TP25

06

TP25

05

TP25

04

TP25

02

TP25

03

TP25

01

TP20

16

TP20

18

TP20

01

TP20

02

TP20

03

TP20

04

TP20

05

TP20

06

TP20

08TP

2009

TP20

21

TP20

11

TP2022

TP20

12

TP20

13

TP20

14

TP20

15

TP20

17

TP20

19

TP30

12

TP30

11

TP30

13

TP30

10

TP30

09

TP30

08

TP30

07

TP30

06

TP30

04

TP30

02

TP3014TP3001TP3003

TP30

05

TP20

24

TP20

23TP2020

TP20

25

Q24

03

Q24

02

120R250

2

17

28

R2408

R2409

R2406

R240

5

R241

1

R241

2

MAIN ASSYC SIDE A

VC4201

IC3402 Pin8

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S76

1 2 3 4

7. GENERAL INFORMATION7.1 DIAGNOSIS

Service Diagnosis List7.1.1 CPRM ID NUMBER AND DATA SETTING The Setting is necessary • " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode. • When the MAIN ASSY , DRIVE ASSY or the FLASH ROM is exchanged.

7.1.2 MODEL SETTING7.1.3 DOWNLOAD METHOD The Setting is necessary • When the MAIN ASSY is replaced. • When the JCKB ASSY is replaced. • When the MAIN ASSY and JCKB ASSY is replaced.

7.1.4 SERVICE MODE [First Screeen] (Version information, etc) [Sub Screen] (Result of error-rate measurement : Video mode/VR mode)

[Second Screen] (ATA/ATAPI debug screen) [Sub Screen 3] (writer maintenance information of ATA/ATAPI DEBUG OSD) [Sub Screen 4] (ATA/ATAPI DEBUG OSD_LD degradation judgement)

[Fourth Screen] (VR-recording error log) [Sub Screen 4] (Error log for VR recording)

[Fifth Screen] (Error log for VR playback) [Sub Screen 2] (Error log for VR playback)

7.1.5 DV DEBUG MODE [Third Screeen] (DV debug information)

7.1.6 ERROR RATE MEASUREMENT Only Video mode measurement

7.1.7 VIDEO ADJUSTMENT FOR SPECIFIC AREA Purposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by

the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO control section for adjusting signals received by the tuner can be used.

7.1.8 AGING MODE

1 2 3 4

C

D

F

A

B

E

77

5 6 7 8

7.1.1 CPRM ID NUMBER AND DATA SETTING

Entering the ID Number and ID Data for DVD Recorder

• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.• When the MAIN ASSY , DRIVE ASSY or the HDD is exchanged.

Important: If no ID label is found on the rear panel, write down the specified ID number by checking it according to "How to confirm the ID number" shown below.

For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual number (ID number) and ID data to each recorder. If the number and data are not set correctly with the following procedure, operations in the future may not be guaranteed. You will find the ID number to be set on the ID label on the rear panel.

The Input is Necessary When:

DVD Recorder Data Disc(GGV1179)Service Remote Control

Unit (GGF1381)

JIGS AND MEASURING INSTRUMENTS

(*) Refer to P138.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S78

1 2 3 4

When exchanging Drive Assy

HDD information is not correct.

HDD information is not correct.Execute HDD Initialize fromthe Disc Setup menu.

CPRM information is not correct.

When displayed following message atPower on FL Tube : [HDD ERR] CRT display :

When displayed following message atPower on FL Tube : [HDD ERR] CRT display :

When displayed following message atPower on FL Tube : [CPRM ERR] CRT display :

Only exchanging Drive Assy

Also exchanging DRIVE Assy simultaneously

Power → ON

When displayed "CPRM ERR"• When exchanging HDD or MAIN Assy, or both exchanged• When exchanging HDD

Initialize StartBasicInitializeFinalizeInitialize HDD

Disc Setup

Input Flow of the ID No. and ID data when exchanging HDD, MAIN Assy or Drive Assy

Confirmation of the CPRM ID No.

Normal operation mode

All recorded data are deleted if the HDD is intialized.Take care that restoration of the user's data recorded on the HDD is totallyimpossible. Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.

*Use Remote Control of the model

*Goes to normal operation with no caution

New HDD/when there is erroron recorded contents

Exchanging to the original HDD(when there is no error on the recorded contents.)

End

[CAUTION]

End

End

Deletion of the CPRM ID No.(when ID No. is registered.)

Input of the CPRM ID No. and ID data

Power → OFF → ON

ExecuteHOME MENU → Disc Setup → IntializeHDD → Start

1 2 3 4

C

D

F

A

B

E

79

5 6 7 8

To enter the input mode, press ESC + STEREO sequentially in a status with no ID number set, such as after FLASH-ROM downloading.

Note:Be sure to enter the ID number in Stop mode.Use the service remote control (GGF1381) for operations. Only opening/closing of the tray are performed from the player.The ID data disc is swept out automatically after the recorder has read the data from it.

How to Input the ID Number and ID Data

[Recorder's ID Number Setting] ID Number ?> - - - - - - - - -

<CLEAR> Exit

Input ID Number !

1

As number input is enabled when the unit enters the input mode, input the 9-digit ID number.(The entered number is also displayed on the FL display.)

2

2

[Recorder's ID Data Setting]

<CLEAR> Exit

Insert The ID Data Disc !

When the ID number has been registered, the unit enters the ID data input mode. (The FL display indicates "INSERT ID.")In this condition, place the ID data disc on the tray and close the tray using the CLOSE key "7/0" on the player.

4

4


Loading The ID Data Disc !

While the data are being read, the message shown in the figure at left is displayed on the screen. (The FL display indicates "LOAD ID.")

5

5

[Recorder's ID Number Setting] ID Number ?> 0 0 0 0 0 0 0 0 1 OK ?

<PLAY> Compare Mode<SEARCH> Enter

Input ID Number !

After inputting the number, press SEARCH to register the ID number.

3

3


Wait Rom Writing !

When the ID data have been read, the data are written to the FLASH-ROM.(The FL display indicates "WRITE ID.")

6

6


Rom Write OK !

<CLEAR> Exit

When the ID data have been written to the FLASH-ROM, the message "Rom Write OK" is displayed on the screen.(The FL display indicates "ID DATA OK.")

After confirming this message, press CLEAR to exit the input mode.

7

8

7

8

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S80

1 2 3 4

How to Confirm the ID Number

How to Clear the ID Number

[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1]Compare> * * * * * * * * *<CLEAR> Exit

Input ID Number !

Press ESC + STEREO sequentially with an ID number already set, and the unit enters the ID number confirmation mode.

The set ID number is displayed on the screen (and on the FL display), permitting you to confirm it.

To exit this mode, press CLEAR .

1

Press ESC + STEREO sequentially with an ID number already set, and the unit enters the ID number confirmation mode.

Input the same number as the ID number you have set.

1

2

2

3

2

3

[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1]Compare> * * * * * * * * *<CLEAR> Exit<STEREO> ID Data Setting Mode

<STEREO> ID Data Setting ModeInput ID Number !

2

After inputting the number, press STOP .Only when the entered number matches the set ID number, the ID number is cleared and the unit exits this mode.If the numbers do not match, you must return to step 2.( STOP is not accepted until 9 digits are entered.)

3

[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1]Compare> 0 0 0 0 0 0 0 0 1 OK ?

<PLAY> Enter<STOP> Memory Clear

Input ID Number !

3

1 2 3 4

C

D

F

A

B

E

81

5 6 7 8

7.1.2 MODEL SETTING• The Setup is Necessary When : a) When the MAIN Assy is replaced b) When the JCKB Assy is replaced c) When the MAIN Assy and JCKB Assy are replaced Note : Make sure of setting the correct number.

• How to Setup the Model 1) After power on, the following screen is displayed on TV monitor. Press " 32 " by using the remote control unit for service(GGF1381).

2) After 1), the following screen is displayed on TV monitor. Press " 012 " by using the remote control unit for service.

Notes : 1) After the setting complete, you can NOT CLEAR the seting data. Make sure the pressing number. 2) " NG " is appeared on TV when unsuitable number is pressed. In such a case, please unplug the power cable and plug it again. Then restart the model setting.

The setting complete when OSD is disappeared. 3) Unplug the power cable. 4) Reset the recorder to all its factory settings. 1. Make sure that the recorder is on. 2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel. The recorder turns off with all settings reset. 5) Enter the Service Mode and then confirm the Model Name " DVR-520H/WY ". 1. Make sure that the recorder is on. 2. Press [ESC] then [DISP] keys by using the remote control unit for Service.

[ Recorder 's Model Setting] Input the number by using the remote for Service.

> --

Input No. Model [ 32 : DVR-520H ] [ 34 : DVR-720H ]

[ Recorder 's Type Setting] Input the number by using the remote for Service.

> --- (Type -- , Region No. -)

Input No. Type [ 01 : WY <Europe> ] [ 02 : WV <UK> ]

DVR-520H/WY VERSION : 2.∗ ∗

SYSCON : RELEASE_44Rev :1.3599.2.2 $

TUFLCON : 2.25 FLASH OK DRIVE : DVD-RW DVR-107X OK

1.10K OK CKT0000353WL OK

HDD : ST380012ACE 80DEVICE : PRISM-PLUSREGION : 2

C : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ FLASH : 64M

Note : For WV types, press " 022 ".

Note : For 720H types, press " 34 ".

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S82

1 2 3 4

7.1.3 DOWNLOAD METHOD• The Download is Necessary When : a) After model setting b) When "NG" is displayed at First screen (version information, etc)

[Notes]Be sure NOT to turn off the unit during downloading.If the unit is turned off during downloading, the SYSCON, TUFLCON, and DRIVE programs may not be properly rewritten, in which case the unit may not be able to initialize itself normally when turned on again. If that happens, repair the unit, as described below, then perform downloading again:

• In a case where the power to the unit was shut off during rewriting of the SYSCON program: The SYSCON program will not function properly if the power to the unit is forcibly shut off while the message "DOWNLOAD- 1" is displayed on the FL display during downloading. If downloading of the programs from the disc or through serial communication becomes impossible, replace the FLASH ROM.• In a case where the power to the unit was shut off during rewriting of the DRIVE program: The DRIVE program will not function properly if the power to the unit is forcibly shut off while the message "DOWNLOAD-2" is displayed on the FL display during downloading. If downloading of the programs from the disc or through serial communication becomes impossible, replace the DRIVE ASSY.• In a case where the power to the unit was shut off during rewriting of the TUFLCON program (only for the flash-type TUFLCON microcomputers): The TUFLCON program will not function properly if the power to the unit is forcibly shut off while the message "DOWNLOAD- 3" is displayed on the FL display during downloading. If downloading of the programs from the disc or through serial communication becomes impossible, replace the TUFLCON microcomputer.

1. DISC DOWNLOAD METHOD• How to Download This is disc download method to save the initial setting data and user setting data. However, the following data is deleted after downloading by this method. * REC mode * Last channel (Before turn unit off)

1) Open a disc tray in the " DVD " function. 2) Put the download disc on the tray. 3) Press and hold a " STOP " button for playback, then press a " DISC NAVIGATOR " button on a front panel. - The disc tray closes automatically and the disc is loaded. - The disc tray opens automatically after loading. 4) Take out the Download Disc. - " DISC DWLD " is displayed on FL and download is started. - The display on FL changes to " DOWNLOAD-1 " - The display on FL changes to " DOWNLOAD-2 " - The display on FL changes to " DOWNLOAD-3 " (*) - After download is completed, the power turns off, and turns on and a disc tray closes automatically. * It takes for about 5 minutes until download is completed. 5) Press and hold a " ESC ", then press " DISP " on a test mode remote control unit for the release version confirmation. 6) Confirm a firmware release version. 7) Press " ESC " on a test mode remote control unit in order to exit the test mode.

(*) : " DOWNLOAD-3" is displayed only when the TuFL u-com is FLASH type.

1 2 3 4

C

D

F

A

B

E

83

5 6 7 8

2. Serial DOWNLOAD METHOD

[Notes] This method is secondary way when the disc loading is impossible.

• JIGS * PC with serial port * RS232C straight cable * RS232C I/F jig (GGF1348) * 7P FFC (VDA1681) * Download program (UFU.exe) * Firmware

• Connection PC ⇔ RS232C cable ⇔ RS232C I/F ⇔ 7P FFC ⇔ DVD Recorder

• How to Download 1) Connect the 232C I/F JIGS above way. 2) Turn on the PC and start the " UFU.exe ".

. 3) Select the Firmware file. ("sz0" file) 4) Turn the DVD recorder on and start the download program. " Target Device is connected" is appeared on the screen.

. 5) Select the Communication Speed (Baud Rate) a) Base Speed 38,400 b) Data Send Speed 115,200 6) START * Even if you click "START" button, sometimes "Communication Error" may come out one to twice, and download may fail. In this case, please click "START" again. * Other factors can be considerd if download fails 3 times or more. * And it takes about an hour for updating the firmware.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S84

1 2 3 4

7.1.4 SERVICE MODE

• Details on HDD data are described below:

HDD : WDC10234564 # 80

Name of manufacturer, part No. by manufacturer

HDD identification error indication

Capacity of the HDD (unit: Gbytes)

If any abnormality exists in HDD connection, the indications shown in Table 1 below are displayed.

For service operations, use the GGF1381 remote control unit for service.The Service-mode screens consist of nine mode screens, which are classified into such rough categories as recording system and VR playback system, and their subscreens.

• How to enter Service mode : Press the ESC then DISP keys in turn while no GUI is displayed. The first screen (version information, etc.) shown below is displayed.

• How to exit Service mode : Press the ESC key.• How to advance to the next Service-mode screen

: While the first screen is displayed, press directly one of the keys 1-9. For service, use the keys 2, 4 or 5, as shown below.

• How to advance to a subscreen within the same Service-mode screen: Press the DIG/ANA key. Pressing the DIG/ANA key repeatedly will change the subscreens

within the same Service-mode screen cyclically.

Note: After entering one of the Service-mode screens, if you wish to shift to another Service-mode screen, exit Service mode first, then reenter Service mode and select your desired Service-mode screen.

DVR-520H/WY VERSION : 2.∗ ∗

SYSCON : RELEASE_44Rev :1.3599.2.2 $

TUFLCON : 2.25 FLASH OK DRIVE : DVD-RW DVR-107X OK

1.10K OK CKT0000353WL OK


C : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ FLASH : 64M

Description of Each Service-mode screen

12

45

678910

3

OK : OK (proper combination)NG+ : Version of the tuner microcomputer too advancedNG– : Version of the tuner microcomputer too old

OK : OK (proper combination)NG+ : Version of the drive too advancedNG– : Version of the drive too old

OK : Serial No. of the drive already registeredNG : Serial No. of the drive not registered

OK : OK (proper drive)NG : NG (improper drive)

1 Model name/destination2 Version of the recorder software3 Revision No. of the system-control computer software

(Edition administration No. [from top to bottom, common software, firmware, application software])

4 Version No. of the tuner microcomputer, Mask or Flash

Result of the combination ckeck with system u-com

5 Information on the built-in drive(Model name, version No., model type, serial No.)

6 Data of the built-in HDD, capacity of the HDD7 Version No. of PRISM8 Region No.9 CPRM data (CPRM key No.)0 FLASH ROM information

While the first screen shown above is displayed, press the DIG/ANA key to enter the subscreen shown below.Note: Each time the DIG/ANA key is pressed, the display changes between the first screen and its subscreen.

1. First screen (version information, etc.)

The Service-mode screens to be used for service are as follows:1 = First screen: Version information, etc.2 = Second screen: ATA/ATAPI debug screen (Writer data)4 = Fourth screen: Error log for the VR recording system5 = Fifth screen: Error log for the VR playback system

(*1)

(*2)

(*3)

(*4)

(*1–*4 : Refer to two pages after.)

1 2 3 4

C

D

F

A

B

E

85

5 6 7 8

• Subscreen 1: Result of error-rate measurement

ERR RATE : x.xe-x/

While the first screen shown above is displayed, press the DIG/ANA key to enter the subscreen shown below.Note: Each time the DIG/ANA key is pressed, the display changes between the first screen and its subscreen.

Note: Be sure to start playback after displaying this subscreen to calculate the error rate.

• Subscreen 2: HDD information

HDD InfoLife Time: 87599h 09m 05s

Table 1: HDD data indications according to various HDD connection statuses

HDD identification conditions Example of HDD data to be displayed

Remarks

Failure in physical identification of HDD(no connection, defective HDD, interface error)

Blank space

Physical identification of HDD possible, but not identified WDC 10234564 # 80 "#" is displayed as HDD identification error

Physical identification of HDD possible, HDD identified, but failure in logical formatting

WDC 10234564 ! 80 "!" is displayed as HDD identification error

Physical identification of HDD possible, HDD identified, and correct logical formatting (HDD correctly identified)

WDC 10234564 80

• How the data on cumulative HDD-on time are processed in memoryStorage place: Backup SRAM, Flash ROMTiming of referring to the data on cumulative HDD-on time: When the power is turned on, the backup SRAM is referred to regarding the data on cumulative HDD-on time, and the data are stored in the RAM. If referring to the backup SRAM fails, the flash ROM is referred to.Timing of updating the data on cumulative HDD-on time: While the HDD is on, the data on cumulative HDD-on time in the RAM is updated every 3 seconds, and every time updating is executed the data are stored in the backup SRAM. When the power is turned off, the data are stored in the flash ROM.

How to clear the data on cumulative HDD-on timeBackup SRAM: When the HDD Identification Setting is performed, the data on cumulative HDD-on time are automatically cleared. The HDD Identification Setting is automatically performed when the CPRM setting is performed on the CPRM setting screen (to display the CPRM setting screen, press the ESC then the STEREO keys).Notes: The data on cumulative HDD-on time are not cleared when resetting to factory-preset values is performed.

The data on cumulative HDD-on time are not cleared when the system-control computer software is downloaded.Flash ROM: The data on cumulative HDD-on time cannot be cleared (they are not cleared even if resetting to factory-preset values is performed or if the system-control computer software is downloaded).Note: The data on cumulative HDD-on time in the flash ROM can be cleared if you clear the data in the backup SRAM following the

above-mentioned procedures then turn off the power of the unit, because the data in the backup SRAM are stored in the flash ROM when the power is turned off.

Cumulative HDD-on time

During playback in VR mode, the average error rate of the past 10 VOBUs is displayed, and during playback in DVD-Video or Video mode, the average error rate of the past 256 sectors is displayed. During playback in VR mode, the rotation rate of the drive (/: normal speed, no display = double speed) is also displayed.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S86

1 2 3 4

(*1) NG+ : Version of the tuner microcomputer too advanced NG- : Version of the tuner microcomputer too old

1. When TUFL µ-com is MASK type NG+ : Download the firmware. NG- : Replace the TUFL µ-com or JCKB ASSY.

2. When TuFL µ-com is FLASH type NG+ : Download the firmware. NG- : Download the firmware.

(*2) NG : NG (improper drive)

Replace the correct Drive Assy.

(*3) NG+ : Version of the drive too advanced NG- : Version of the drive too old

NG+ : Download the firmware. NG- : Download the firmware.

(*4) NG : Serial No. of the drive not registered

Check the part No. and replace the correct Drive Assy.

• When "NG" is displayed at First screen (version information, etc)

1 2 3 4

C

D

F

A

B

E

87

5 6 7 8

• Subscreen 1: Command log (ALL) of ATA/ATAPI DEBUG OSD

Subscreen 1 of the second screen is displayed when the ESC, DISP, then "2" keys are pressed, in that order.Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.

The cumulative power-on time and error log that are administered by the writer are displayed. Such information is obtained when the power is turned on. Thereafter, each time the SEARCH key on the remote control unit for service is pressed while subscreen 3 is displayed, the updating command is sent, and the data on the subscreen are updated. Care must be taken when updating this subscreen, because an undesired command is inserted if it is executed while recording, etc.

A T A / A T A P I History - ALL3 2 0 1 0 0 0 0 0 0 0 0 0 0 A 0 0 0 OK3 2 2 A 0 0 0 0 0 D E B B 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 D F 1 E 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 D F 8 1 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 D F E 4 0 0 0 0 6 2 0 0 0 OK3 2 2 A 0 0 0 0 0 E 0 4 6 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 E 0 A 9 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 E 1 0 C 0 0 0 0 6 3 0 0 0 OK

> 3 2 2 A 0 0 0 0 0 E 1 6 F 0 0 0 0 6 2 0 0 0 2 3 A 0 0

• Subscreen 3: Writer mentenance information of ATA/ATAPI DEBUG OSD

A T A / A T A P I Writer MaintenanceInfoPower ON 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 1 0 2 : 5 6 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0D V D 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0R 0 0 5 3 : 4 8 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0W 0 0 2 2 : 1 6 0 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0C D 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0R 0 0 3 4 : 0 4 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0W 0 0 0 0 : 0 0 0 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

0 0- 0 0

• Subscreen 2: Command log (ERROR) of ATA/ATAPI DEBUG OSD

Error log for the Writer

1

23

45

1 Power-on time/cumulative power-on time2 Duration of emission of the laser diode (LD) for DVD-R/DVD while reading3 Duration of emission of the LD for DVD-W/DVD while writing4 Duration of emission of the LD for CD-R/CD while reading5 Duration of emission of the LD for CD-W/CD while writing (This function is not used for this model.)

2. Second screen (ATA/ATAPI debug screen)

(Not for Service)

(Not for Service)

(Not for Service)

R7R Drive Assy (Read + Write total time)DVD : 4700hCD : 11000h

MTTF time of each LD (Reference)

(as the guideline of life span of each LD)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S88

1 2 3 4

The degrees of degradation of the LD (laser diode) for the writer (LDs for CD and DVD separately), temperature, and RF level are displayed. To update the data on the subscreen, press the SEARCH key on the remote control unit for service while subscreen 4 is displayed. See Table 1 below for a description of each item and the conditions for updating data.

• Subscreen 4: ATA/ATAPI DEBUG OSD_LD degradation judgment

123456

A T A / A T A P I - LD Degrade C D : 0 0 7 0 1 0 4 % O KD V D : 0 0 6 8 9 6 % O KT M P : 0 0 A 3 4 1 °CA D J : 0 0 67 2 6 °CRF : 3 D 7 0TLT : F F D 5

Table 1: Description of each item and conditions for updating data

No. Item DescriptionConditions for updating by pressing the SEARCH key

Remarks

1 CDDegradation judgment of LD for CD. Regarded as NG when the value is 120% or higher (same standard as for the PC drive) No disc inserted in the disc tray ∗1

2 DVDDegradation judgment of LD for DVD. Regarded as NG when the value is 120% or higher (same standard as for the PC drive) No disc inserted in the disc tray ∗1

3 TMP Current temperature inside the Writer No disc inserted in the disc tray ∗1

4 ADJ Temperature (approx. 25°C) inside the Writer during adjustment No disc inserted in the disc tray ∗1

5 RFRF level (16-bit data, proportional calculation performed using the actual RF level value with 2.5 V = 0xFFFF as the maximum value, displayed in 4-digit hexadecimal)

During playback of disc medium

6 TLTWriter adjustment data for straight (non-HDD) model(FFFF is diplayed when the writer is not adjusted.) No condition

∗1 : For correct judgment, after leaving the unit at a normal temperature (25°C typ.) for some time, judgment must be performed immediately after the unit is turned on with no disc loaded.

∗2

∗1 : For correct judgment, after leaving the unit at a normal temperature (25°C typ.) for some time, judgment must be performed immediately after the unit is turned on with no disc loaded.

∗2 : Use this item only for confirmation before and after lens cleaning, as the lens becomes dirty with dust.

1 2 3 4

C

D

F

A

B

E

89

5 6 7 8

• Subscreen 1:

• Subscreens 2 and 3:

• Subscreens 5 to 11:

• Subscreen 4: Error log for VR recording

Subscreen 1 of the fourth screen is displayed when the ESC, DISP, then "4" keys are pressed, in that order.Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 11.

1 Recording-related error log for the last 18 errors, divided into 2 screens(generation time [year-month-day, hour:minute:second], error data in simplified description)

RunFnc : ---- Ecl : **** Rate : **------------------------------------------------------------------------------------------------------------------------------------

R e c o r d i n g E r r o r H i s t o r y D i s p l a y0 1 – 0 6 – 0 1 2 0 : 0 5 : 3 0 N o S y s H d r I N0 1 – 0 6 – 0 2 0 0 : 2 2 : 1 0 W r i t e E r r o r

1

Notes:• For details on error messages, see Table 2 "Description of VR-recording-related errors".• The two error-log screens can be switched by pressing the SPEED+ or SPEED- key.

These subscreens are not for service use.


3. Fouth screen (VR-recording-related error log)

Refer to the Table 2 regarding the Error messages (P92).

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S90

1 2 3 4

• Subscreen 1:

• Subscreens 3 and 4:

• Subscreen 2: Error log for VR playback

Subscreen 1 of the fifth screen is displayed when the ESC, DISP, then "5" keys are pressed, in that order.Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.

1 Data on location of the displayOriginal(G)/play list (L), title No., chapter No. (X:XX-XX), time of the display (min, sec, frame [XXmXXsXX]), busy mark of the virtual mechanical-control computer (#), error rate of the transfer data (X.XeXX), playback logical address (ID [XXXXXXXX])

2 Error message logOriginal(G)/play list (L), title No., time of generation (min, sec [XXX:XXXX]), playback-related error log for the last 13 errors (XX:XXXXXXX)

G : 001–01 00h00m00s00# –. – e – – 00 . 00MTgt : STOP Now : STOP Spd : 0Man : STOP Sub : 0 VBF : 000 ABF : 00TrMd : STOP TrSt : 0 TNo : Ver : 00RvMd : STOP RvSt : 0 DNo : Aer : 00CcSt : STOP ld : 00000000Stc : 00000000 Tpp-Av1 : +-0 V-A : +-0MPEG2 720x480 A0 AC-3 2ch 0256kNT ASP : 43 CGMS : 0 APS : 0 Src : 0END : 00h00m00s00 Cell : 000

G : 01–01 00m00s# –. – e – – 00000000h m s M e s s a g e h m s Err

G001 : 000000 Tr : N u l l b l k L002 : 001230 Tr : S c h L a t e L002 : 004103 Tp : V o b D i f + L002 : 004104 Tp : V o b D o f –

1

2


4. Fifth screen (Error log for VR playback)

Notes:• For details on error messages, see Table 1 "Description of VR-playback-related errors".• If a VR-playback-related error is generated, a problem in data reading from the disc may be suspected. (The possibility of a problem on the drive side is high.)

1 2 3 4

C

D

F

A

B

E

91

5 6 7 8

egasseMrorrE noitpircseD

klBlluN:rTkcolbpotehttaLLUN:ksatrefsnarT

).ssecorpnoitcetorpgnitratsdnaseires0001-RVDehttaedammaertsGNgnitceteD(

rrEdaeR:rT rorredaerATA:ksatrefsnarT

etaLhcS:rT etalhcraesATA:ksatrefsnarT

rvOTmeS:rT )yalpsidehthtiwnoitazinorhcnyson(erohpamesgniniagroftuoemiT:ksatrefsnarT

rrEivaN:rT IVANlautcadnaatadtnemeganamfo)rotagivan(IVANneewtebycnetsisnocnI:ksatrefsnarT

rEredrO:rT redrotnetsisnocnI:ksatrefsnarT

gnaH1vA:nM yrevocerstratsdnaredocedVAfopu-gnahstceteD:ksatniaM

!VCR_RRE yrevocerstratsdnaredocedVAfopu-gnahstceteD:ksatPPT

+fiDboV:pT .ruohUBOV1ybsecnavdaCTSredocedehT:ksatPPT

-fiDboV:pT secnavdanoitamrofnitnemeganamehtfoCTSehT:ksatPPT

LLUNdim:pT .LLUNsawdetangisedretniopnoitamrofnitnemeganamehT:ksatPPT

gNnacS:pT .delecnacsawgninnacsnehwyromemPPTehttesoteruliaF:ksatPPT

rEpetSR:pT .detacolsawllecpotehtesuacebdetanimretylbicrofsawnoitarepoeht,deliafdahpetsesreverehthguohtlA:ksatPPT

rrEppt:pT .derruccoycnetsisnocnI:ksatPPT

rvOTts1:vR gnidocedgnitratsretfayletaidemmiUBOVpotehtotnoitpurretnirofgnitiawroftuoemiT:ksatkcabyalpesreveR

rvOTnpO:vR gnidocedgnitratsretfayletaidemmiPOGnepoehtfoerutcip-BrofgnitiawroftuoemiT:ksatkcabyalpesreveR

rvOTlpO:vR gnidocedgnitratsretfayletaidemmiPOGnepoehtfoerutcip-IrofgnitiawroftuoemiT:ksatkcabyalpesreveR

rvOTknL:vR knilrofgnitiawroftuoemiT:ksatkcabyalpesreveR

liaFknL:vR eruliafknilgnitcetedybnoitasnepmocstratS:ksatkcabyalpesreveR

rvOTF2R:vR esuapdrawrofotesuapesrevermorftuoemitgnitcetedretfalairterstratS:ksatkcabyalpesreveR

rEbVpoT:vR kcabyalplamronesrevergnirudatadpotehtfororreelbissopafoesuacebnoitanimretdecroF:ksatkcabyalpesreveR

rEredrO:vR redrotnetsisnocnI:ksatkcabyalpesreveR

rvOTC/B:vA tuoemitraelc-reffuB:1VA

rvOmrtS:vA ydaermaertsrofgnitiawroftuoemiT:1VA

rvOTmpT:vA egnahcedomPTroftuoemiT:1VA

rvOTmpS:vA dnammocpetsaroftuoemiT:1VA

RRE_SO_CC rorreSO:ksatnoitpacdesolC

Table 1: Description of VR-playback-related errors

Abbreviations:STC = System Time ClockVOBU = Video Object UnitGOP = Group Of PictureB-picture = Bidirectionally predictive-picture

I-picture = Intra-pictureP-picture = Predictive-pictureTP mode change = AV1 term (Trick Play mode change)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S92

1 2 3 4

Table 2: Description of VR-recording-related errors

Error Message Description

Stream NG Inappropriate input stream data

Stm Start NG Failure to start encoding (reasons not clear)

AVEnc Hang Inappropriate MPEG encoder

No SysHdr IN System packet is not input periodically

Timeout waiting for system packet input at the beginningStrm Start NG

IN Encode * Changes cannot be made in the process of encoding

EncModul Hang Encoder routine is hung up.

Error related to MPEG Encoder


Mem get NG Video Mode Copy Memory has not ensured.

V Rsv RzoneNG Video Mode Copy Reserve Rzone failed

VCHDD Info NG Obtaining Video Mode Copy HDD Cell information failed

VC Pck Anl NG Analizing Video Mode Copy Pack failed

Video Mode Copy VOBU Size NGVC VOBU SizeE

Tracon Trn NG Video Mode Copy Tracon tranfer has not been completed.

Error related to Dubbing

Error related to Drive systemError Message Description

BUF Overflow Overflow of the Stream Buffer

Drive Hang The Drive is hung up.

Write Err The Drive failed to write and could not be recovered.

Read Err Reading failed, ECC failed, etc.

Abnormality in the drive hardware or firmwareDrv Hard Err

Mech No Res No response from the mechanical-control computer

Timeout waiting for drive operationDrv Timeout

NWA Exhaust

MKB reading error

NWA surpassed and impossible to use

General error of the drive

MKB Invalid

Drv Err

Fail Repair Repair failed

Because some data are invalid, data cannot be written

AlthoughTMP_VMGI is not written, it may be Video Mode disc.

Reserve RZone failed

Close RZone failed

Repair RZone failed

ReadOnly DISC *

May Be V mode

Rzn Rsv NG

Rzn Cls NG

Rzn Rpr NG

Bdr Opn NG Open Border failed

Bdr Cls NG Close Border failed

Format NG

OPC failed

Format failed

PCA has been used up.

RMA has been used up.

OPC NG

PCA Full

RMA Full

VTSI_B Wr Err Video Mode VTSI BUP Write Error

VTSI Wr Err Video Mode VTSI Write Error

Video Mode TMP VMGI Write Error

Video Mode Close Rzone failure

TMP-VMG WrErr

CLS Rzon Fail

1 2 3 4

C

D

F

A

B

E

93

5 6 7 8

Other Errors

Error related to Dubbing (continued)Error Message Description

Strm TransfNG Video Mode Copy Stream Transfer NG

VC FlushC NG Video Mode Copy Flush Cache NG

VC Transf Stp Video Mode Copy Transfer Stop

VC CopyCancel Video Mode Copy Copy Cancel

Video Mode Copy idling NGVC Idling NG

VC TSO BLK NG Video Mode Copy TSO Block transfer has not been completed.

Maximum number for Video Mode copy Cells exceededVC Cell Max

VC HDD Inf NG

Inappropriate Video Mode Copy HDD content

No information on Video Mode Copy HDD

VR →HDD copy prohibitted material

VC HDD C Err

V2H SRC Prot

V2H Aud Ch NG VR →HDD Audio Channel NG

VR →HDD Audio Stream number NG

VR →HDD Audio Mode NG

VR →HDD Video resolution NG

VR →HDD other NG

VR →HDD copy and other NG

V2H Aud Stm N

V2H Aud Md NG

V2H V Reso NG

V2H Unknown

H2D CP SomeNG


DRAM NG Abnormality in access to the Work DRAM

SRAM NG Abnormality in access to the backup work SRAM

CPRM IC NG Inappropriate CPRM IC

Error in gaining data

Abnormality in VBR SRAM

Backup RAM data has not been wrtten on the File Sys.

Inappropriate VOBU information

Inappropriate stream data to the Ouroboros input

Watermark detected

No video input (not locked)

No further data can be written because the disc is full.

No more space in the internal work-management area

Invalid parameter

Source to be recorded is copy-protected.

In the process of the emergency processing

Invalid VMG content

Invalid TMP_VMGI content

Drive Destroy The drive has crashed.

MKB REVOKED

WM Cracked WM Cracked

VBR-SRAM NG

BK BATT Down Backup RAM data has been erased.

BK FSYS Dirty

VOBU Info NG

Ourob Strm NG

WaterMark Det

No Video

Disc Full

No More Info *

No Permission * No permission to write to the disc

Limit Over * Standard maximum limit exceeded

Rec Pause * No operation permitted during recording pause

Invalid Param *

Protect Src *

Now Busy *

Invalid Disc * The disc cannot be recognized.

Invalid UDF * Invalid UDF content

Invalid VMG *

Invalid TMVMG

Unmatch Stamp * Impossible to modify because of nonmatching time stamp

Virgin DISC Virgin Disc

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S94

1 2 3 4

Other Errors (continued)Error Message Description

SW Vpb mode * Switching to video playback routine is required.

SW Vrec mode * Switching to video recording routine is required.

NV Pck MK Err

NV Pck DMA Er

Error in creating NaviPack

Inappropriate NaviPack DMA

Cell Close NG

undetermined error

Abnormality in change of statuses

Cancellation

Bus Reset has been excecuted.

Repairing has been executed.

Formatting has been executed.

Some bugs

Inappropriate Category information

Type NG

Count Max exceeded

Cell Close NG

Relocation Do VR-recording data was relocated

Something *

Status NG *

Irr Action * Incorrect action

Abort *

BusReset Done

Repair Excec

Format Excec

BUG

PARAM NO ACCP Recording parameter is not matched.

DRAM CLR Err Video Mode DRAM (Stream Buffer) Clear failure

V Categ ID NG Inappropriate Category ID

V Cate Inf NG

V Ext TY NG

V Ext MAX Ovr

V ExtToo Big The extension file is too large.

Over Heat Abnormal temperatute

No ErrorError Message Description

Non Err * Normal

Notes;• Any error message marked with ∗ is displayed "RecErr : ---------"

on the Subscreen 1 of the fourth screen.• In a case of an error in the drive system, scratches or dirt on a disc,

or a problem of the drive itself (dirty pickup) may be suspected.

Abbreviations:ECC = 4 byte Code for Error CorrectionUDF = Universal Disc FormatPCA = Power Calibration AreaOPC = Optical Power ControlNWA = Next Writable Address

VMG = Video ManagerRMA = Recording Management AreaMKB = Media Key BlockTMP_VMGI = Temporary Video Manager

InformationBorder = from Lead-in to Lead-out

Error related to HDDError Message Description

HDD unauthor Inconsistent HDD serial No.

HDD Destroy HDD is not recognized on the bus.

TT Rec Over Title recording time full

HDDReset Done HDD Reset executed

Task No Activ

HDD Buff High

Task has not been activated.

High-level process executed for the HDD Buffer

DMA error in HDD copy transfer

HDD initialized

Inconsistent MBR data

Incorrect HDD Management Data

Abnormal power off

Inappropriate HDD SMART

HDD Trans Err

HDD Zero WR MBR readout generated

HDD Initialize

HDD MBR NG

HDD SIG NG Inconsistent HDD Management Data Magic

HDD INFO BAD

HDD IRRG POFF

HDD SMART NG

1 2 3 4

C

D

F

A

B

E

95

5 6 7 8

Table 3: List of Key Codes

How to enter each check modeTest mode remote control unit : [A8**] Remote control unit supplied with the DVR : [AB**]

No. Check Item Key Input Operation / purpose Remarks

1EE system(same as preview)

[ESC] → [A.MON] Turns on/off EE mode cyclicallyMake sure that CGMS = 11 becomes when CGMS = 10 is input.EE mode: Simulation mode for recording status

[PLAY] Starts the EE system in EE mode (main-unit setting rate)

[STOP] Stops the EE system in EE mode

2 Error-rate measurement [ESC] → [SIDEB]

V-mode recording:After recording for 10 seconds, the unit starts playback while displaying the error rate.DVD-Video:The error rate is automatically measured, then the result will be displayed.

For details, see" 7.1.4 ERROR RATE MEASUREMENT ".

3 Settings for specific areas

[ESC] → [CHP/TIM] Enters Adjustment mode for AVIO settings

Settings are made for the selected input (TUNER, LINE).For details, see " 7.1.7 VIDEO ADJUSTMENT FOR SPECIFIC AREA ".

[ESC] Determines the settings, then exits Adjustment mode

How the ESC code is processed• When the ESC code is received, ESCAPE mode is entered, but in combination with the code(s) that follow(s), a specific meaning is added.• If ESC codes are received continuously, ESCAPE mode is retained.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S96

1 2 3 4

7.1.5 DV DEBUG MODE

(DV/1394) Init:OK AV:01 DV:01 INT4:02

[Recoder] GUID:00E036000160001 IRMiPCR:C03F0000 oPCR:0000007A[DV] GUID:0080880303480E96VN:VICTOR MN:GR-D50KTM:C3 TS:75 CT:32 WP:01 PS:FF OS:00CA:A000002020 CV:FF MD:VTR[DVdecoder:Yes]TC:00h20m35s02f RD:02/02/05 RT:10h34m50sASPECT:4:3 CGMS:000000 APSTB:00 DEC:525-60SF:32kHz QU:12bit AMODE:4) Stereo[DVencode:No]TC:--h--m--s--f RD:--/--/--/-- RT:--h--m--sASPECT:-------- CGMS:-- APSTB:--

1

2

4567891011121314

3

Press the ESC, DISP, then "3" keys, in that order.

Boldface alphanumerics : Fixed indicationsNonboldface alphanumerics : Variable indications

No. Item Description Remarks

1

InitWhether the initialization of uPD72893B (1394LINK & DVcodec IC) has been completed (OK) or not (NG)

In a case of NG, communication with uPD72893B may have failed.

AV Number of AV devices on the local bus

DV Number of DV devices on the local busIf the number does not become 01 even if a DV device is connected, identification of that device fails.

INT4Number of executing INT4(PIO) interrupt processing routines until a POWER ON notification arrives from uPD72893B (normally, 02)

2 GUID GUID set in ConfigROM of the unitIn a case of ROOT (IRM), IRM is displayed at the rightmost of the GUID indication

3iPCR iPCR value of the unitoPCR oPCR value of the unit

4 GUIDGUID set in ConfigROM of the connected DV device

Data are displayed only if one DV device is identified. If the connected DV device is ROOT (IRM), IRM is displayed at the rightmost of the GUID indication

5

VNVendor name set in ConfigROM of the connected DV device

Data are displayed only if one DV device is identified. (Depending on the device, the vendor name may not be set in ConfigROM.)

MNModel name set in ConfigROM of the connected DV device

Data are displayed only if one DV device is identified. (Depending on the device, the vendor name may not be set in ConfigROM.)

6

TM Transport Mode data obtained from the DV device

Data are displayed only if one DV device is identified.

Data are displayed only if one DV device is identified.

Camera or VTR is displayed only if one DV device is identified.

TS Transport State data obtained from the DV device

CT Cassette Type data obtained from the DV device

WP Copy-protection data obtained from the DV device

PS Power-state data obtained from the DV device

OSOutput signal mode data obtained from the DV device

CA Connect AV data obtained from the DV device

CV Camera/VTR data obtained from the DV device

MD DV device mode

8

7

[DVdecode:XXX]Whether Yes (in the process of requesting DV input) or No is indicated in XXX

Normally, Yes is indicated only when CH is set to DV

1 2 3 4

C

D

F

A

B

E

97

5 6 7 8

No. Item Description Remarks

9

TCTime-code data of the DVdecode Stream, or response data of the Time Code command

Stream time-code data are obtained when playback in the forward direction is performed. Otherwise, time-code data are obtained through an AV/C command.

RD Rec Date of DVdecode StreamRT Rec Time of DVdecode Stream

0

ASPECT Aspect Ratio of DVdecode Stream

CGMSCGMS of DVdecode Stream (from left to right, CGMS data of bits 5-4: Audio ch2, bits 3-2: Audio ch1, and bits 1-0: Video)

Recording of DV input cannot be performed unless the value of CGMS is 00.

APSTB APS trigger bit of DVdecode stream

DEC With/without DVdecode stream inputWith input: Signal type (525-60, 625-50, 1125-60, 1250-50, or Invalid) is indicated, Without input: "No" is indicated.

-

SF Sampling Frequency of DVdecode StreamIf SF is 44 kHz, it is considered that 44.1-kHz audio is input, and sound is muted on the unit.

QU QUANTIZATION of DVdecode StreamAMODE AUDIO MODE of DVdecode Stream

= [DVencode:XXX]Whether Yes (in the process of requesting DV output) or No is indicated in XXX

Normally, Yes is indicated only with HDD or DVD playback

~

TC TIME CODE of DVencode streamRD REC DATE of DVencode streamRT REC TIME of DVencode stream

!

ASPECT Aspect Ratio of DVencode stream

CGMSCGMS of DVencode stream (common to video, audio ch1 and audio ch2)

Normally, sources other than CGMS=00 are not output.

APSTB APS trigger bit of DVencode stream

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S98

1 2 3 4

Sim

ple

Dia

gn

osi

s

Sym

pto

ms

Lo

cati

on

in t

he

Deb

ug

Scr

een

Item

s to

be

Ch

ecke

d, a

nd

Co

nd

itio

ns

Po

ssib

le c

ause

s

No

oper

atio

n fo

r ei

ther

DV

in

put o

r ou

tput

1

Che

ck th

e in

it in

dica

tion:

OK

:In

itial

izat

ion

of D

V-r

elat

ed L

SIs

(IC

5101

, IC

5202

) ap

prop

riate

ly c

ompl

eted

NG

:C

omm

unic

atio

n fa

ilure

bet

wee

n D

V-r

elat

ed L

SIs

(IC

5101

, IC

5202

) an

d H

OS

T m

icro

com

pute

r (I

C10

01).

Initi

aliz

atio

n of

DV

-rel

ated

LS

Is (

IC51

01,

IC52

02)

has

not b

een

com

plet

ed p

rope

rly.

Def

ectiv

e IC

, def

ectiv

e so

lder

ing,

def

ectiv

e po

wer

sup

ply,

et

c.

Che

ck th

e nu

mbe

r of

DV

dev

ices

whe

n on

e D

V d

evic

e is

con

nect

ed to

the

reco

rder

:01

:T

he c

onne

cted

DV

dev

ice

is c

orre

ctly

iden

tifie

d.O

ther

than

01:

The

con

nect

ed D

V d

evic

e is

not

cor

rect

ly id

entif

ied.

Def

ectiv

e D

V te

rmin

als,

impr

oper

con

nect

ion

of th

e D

V-t

erm

inal

boa

rd, d

efec

tive

IC, d

efec

tive

cabl

es, a

n IE

EE

139

4 de

vice

oth

er th

an th

e D

V d

evic

e co

nnec

ted

No

pict

ure

nor

soun

d fo

r D

V

inpu

t

7

Che

ck o

f DV

dec

odin

g w

hen

the

reco

rder

cha

nnel

is s

et to

DV

:Y

es:

The

rec

orde

r is

in th

e pr

oces

s of

a D

V in

put o

pera

tion

No:

The

rec

orde

r is

not

exe

cutin

g a

DV

inpu

t ope

ratio

n

Def

ectiv

e IC

, def

ectiv

e so

lder

ing,

def

ectiv

e po

wer

sup

ply,

et

c.

9

Che

ck D

EC

:52

5-60

:A

n N

TS

C D

V s

igna

l is

inpu

t fro

m th

e D

V d

evic

e.62

5-50

:A

PA

L D

V s

igna

l is

inpu

t fro

m th

e D

V d

evic

e.N

o:N

o D

V s

igna

l is

inpu

t fro

m th

e D

V d

evic

e.

Def

ectiv

e D

V te

rmin

als,

impr

oper

con

nect

ion

of th

e D

V-t

erm

inal

boa

rd, d

efec

tive

IC, d

efec

tive

sour

ce d

evic

eN

ote

:A

s to

a m

odel

hav

ing

the

Inpu

t Lin

e S

yste

m

setti

ng, i

f the

set

ting

and

the

actu

al in

put s

igna

l sy

stem

do

not m

atch

, no

pict

ure

appe

ars.

DV

inpu

t rec

ordi

ng im

poss

ible

9

Che

ck C

GM

S:

00:

A c

opy-

perm

itted

sou

rce

is b

eing

inpu

t.O

ther

than

00:

A c

opy-

prot

ecte

d so

urce

is b

eing

inpu

t.

Rec

ordi

ng c

anno

t be

perf

orm

ed fo

r a

copy

-pro

tect

ed

sour

ce.

No

soun

d fo

r D

V in

put

0

Che

ck S

F:

32 k

hz: A

n au

dio

sign

al w

ith 3

2-kH

z sa

mpl

ing

freq

uenc

y is

bei

ng in

put.

48 k

hz: A

n au

dio

sign

al w

ith 4

8-kH

z sa

mpl

ing

freq

uenc

y is

bei

ng in

put.

44 k

hz: A

n au

dio

sign

al w

ith 4

4.1-

kHz

sam

plin

g fr

eque

ncy

is b

eing

inpu

t.

An

audi

o si

gnal

with

44.

1-kH

z sa

mpl

ing

freq

uenc

y is

m

uted

.

No

pict

ure

nor

soun

d fo

r D

V

outp

ut-

Che

ck D

Ven

code

dur

ing

DV

D/H

DD

pla

ybac

k:Y

es:

The

rec

orde

r is

in th

e pr

oces

s of

a D

V o

utpu

t ope

ratio

nN

o:T

he r

ecor

der

is n

ot e

xecu

ting

a D

V o

utpu

t ope

ratio

n(N

o is

als

o di

spla

yed

durin

g pl

ayba

ck o

f cop

y-pr

ohib

ited

sour

ces

or

s

imul

tane

ous-

reco

rdin

g/pl

ayba

ck.)

Def

ectiv

e IC

, def

ectiv

e so

lder

ing,

def

ectiv

e po

wer

sup

ply,

et

c.

1 2 3 4

C

D

F

A

B

E

99

5 6 7 8

7.1.6 ERROR RATE MEASUREMENTHow to enter Error-Rate Measurement modePress the ESC key then the SIDE-B key of the remote control unit for service to enter Error-Rate Measurement mode. During playback of DVD-VIDEO, Error-Rate Measurement mode can also be entered by pressing the ESC key then the PLAY key.

How to exit Error-Rate Measurement modePress the ESC key. The error-rate display disappears, and Error-Rate Measurement mode is exited.

Note: The error rate cannot be measured in VR mode or during CD playback.

Functions1 Video-mode recording (recording medium)

In this mode, DVD recording is automatically performed for 10 seconds, the recorded DVD title is played back while the error rate is being measured, then as soon as playback of the recorded DVD title is finished, playback stops.*1 After error-rate measurement is finished, the average error rate will be displayed on the FL display and OSD. Only in a case in which the calculation of the average error rate fails, the tray will open.

2 DVD-VIDEO (playback medium)Only during playback, when the ESC key then the SIDE-B key (or the ESC key then the PLAY key) are pressed, the error rate is calculated and displayed on the FL display and OSD.(∗2) Only in a case in which the calculation of the average error rate fails, the tray will open.

Changes of display

Table 1: Video mode (recording medium)

E R R O R R A T E

E R R O R R A T E

x x x x x

E R x . x E - x

E R x . x E - x

E R R R A T E : x . x E - x -

E R R R A T E : x . x E - x * O K

OperationDisplay

FL Display OSD (On Screen Display)

"ERROR RATE" is displayed on the FL display for an instant.

DVD recording starts.

DVD recording is performed for 10 seconds.

The recorded DVD title is played back while the error rate is being measured, then as soon as playback is finished it stops.

After error-rate measurement is finished (∗1), the average error rate, the measurement-finish mark (∗), and the OK/NG-judgment result (∗3) will be displayed on the FL display and OSD.(If the tray opens as a result of NG judgment, the display on the FL display and OSD will be retained.)

Table 2: DVD-Video (playback medium)

E R x . x E - x

E R x . x E - x

E R R R A T E : x . x E - x -

E R R R A T E : x . x E - x - O K

OperationDisplay

FL Display OSD (On Screen Display)

Only during playback, when the corresponding keys are pressed, the error rate is calculated and displayed on the FL display and OSD. (∗2)

After error-rate measurement is finished (∗1), the average error rate, the measurement-finish mark (∗), and the OK/NG-judgment result (∗3) will be displayed on the FL display and OSD.(If the tray opens as a result of NG judgment, the display on the FL display and OSD will be retained.)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S100

1 2 3 4

∗1 : Whether error-rate measurement is finished or not is judged, as shown in Table 3 below.

∗2 : During DVD-VIDEO error-rate measurement, even after error-rate measurement is finished, playback continues, and the display of the error rate results is retained. In this playback mode, if Error-Rate Measurement mode is exited by pressing the ESC key, then it is reentered by pressing the ESC and SIDE-B keys (or ESC and PLAY keys), the error rate will not be updated, and the previous value is displayed. To reset the previous error rate, stop disc playback.

∗3 : OK/NG judgmentIn DVD/VIDEO and Video Mode recording, OK/NG judgment is displayed under the following conditions:

Table 3: On judgment whether error-rate measurement is finished or not

Table 4: List of OK/NG threshold values

Recording ModeJudgment whether error-rate measurement is finished or not

Recording/playback duration required for error-rate measurement

Video mode

After playback of a certain amount (∗) of dataMeasurement of the 16 ECC blocks is performed 16 times, then the grand sum is used for calculation of the error rate.The capacity is as follows:16 ECC blocks × 16 sectors × 2048 bytes × 16 times= 8388608 bytes= 67108864 bits

The time required for completion of error-rate measurement varies, depending on the input video signal to be recorded.(The more the motion in the input video signal to be recorded is animated, the shorter the playback time required for completion of error-rate measurement becomes.)

Disc Type Recording Mode Finalized or not finalized Reference Value DisplayDVD-VIDEO 8.0 × 10 OK / NG

DVD-R Video modeFinalized 1.0 × 10 OK / NG

Not finalized 1.0 × 10 OK / NG

DVD-RW Video modeFinalized 1.0 × 10 OK / NG

Not finalized 1.0 × 10 OK / NG

– 4

– 3

– 3

– 3

– 3

1 2 3 4

C

D

F

A

B

E

101

5 6 7 8

7.1.7 VIDEO ADJUSTMENT FOR SPECIFIC AREAPurposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by

the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO control section for adjusting signals received by the tuner can be used.

How to enter setting modes: To enter General Setting mode, press the ESC key then the CHP/TIM key of the remote control unit for service. To enter Specific Channel Setting mode, press the DIG/ANA key in General Setting mode.

How to exit setting modes: Press the ESC key. The setting mode is exited, the OSD disappears.

[Display in Specific Channel Setting mode]

This mode is entered when the DIG/ANA key is pressed in General Setting mode. In this mode, specific settings can be made for up to 12 channels. For channels that do not have specific settings, the settings of General Setting mode are applied.Display in Specific Channel Setting mode (A picture from the tuner can be viewed using the semitransparent OSD display.)

1. Specific Channel Setting mode

AVIO Specific Area Mode Ver *.**

Input - [ tuner ]

Sync AGC : ON *

Threshold : Normal *

V-Sync Det : Normal *

Std Det : Normal *

HD Err Det : Normal *

Individual setting state

Input Channel - [ 1CH]

Sync AGC : ---

Threshold : ------

V-Sync Det : ------

Std Det : ------

HD Err Det : ------

[When specific channel settings have NOT been made]

[When specific channel settings have been made]

General Setting data

Specific Channel Setting data

AVIO Specific Area Mode Ver *.**

Input - [ tuner ]

Sync AGC : ON *



Std Det : Normal *



Input Channel - [ 1CH]

Sync AGC : ON

Threshold : Auto Threshold Level---[3]

V-Sync Det : Normal

Std Det : Normal

HD Err Det : Normal

∗ : setting is the default.

• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (--).If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are identical to the default settings or those of General Setting mode.

• The channels to be displayed in "Input Channel" are as follows:• In a case of line input: L1-L3, DV• In a case of tuner input: Received channel (a channel to be set in specific channel settings)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S102

1 2 3 4

Table 2: Key operations in Specific Channel Setting mode (effective only during recording/playback stop)

Key Operation Setting (∗: Default) Remarks

DIG/ANASwitches cyclically between General Setting mode and Specific Channel Setting mode.

– –

INPUT SELECT,CHANNEL +/–(∗R)

Switches inputs or channels. – –

[SIDE A], [SIDE B] Sets Sync AGC. ON (∗) / OFF –

[SPEED +], [SPEED -] HD Err Det Normal (∗) / Fast / Stop –

[Rev SCAN],[SCAN Fwd]

Sets V-Sync Det. Normal (∗) / Short / Long –

[Rev STILL STEP],[STILL STEP Fwd]

Sets Std Det. Normal (∗) / Non STD –

–

–

–

[Rev ×3], [×3 Fwd] Sets Threshold level.

(∗) NormalAuto Threshold LevelManual Threshold LevelPedestal Level

–

[Rev CHAPTER SKIP] [CHAPTER SKIP Fwd]

Sets Threshold level. According to the setting of Threshold, the values can be changed within the range mentioned below.

–

• Normal: The value is fixed, with no display of the value.

–

• Auto Threshold Level: 0-8 (Default: 0)

• Manual Threshold Level: 0-8 (Default: 0)

• Pedestal Level: 0-8 (Default: 0)

CLEARInitializes the setting of Specific Channel Setting mode. –

Pressing the key resets the settings of Specific Channel Setting mode for that channel to the initial values. Settings of General Setting mode are not affected.

PAUSE

The specific-setting data for the currently selected channel are reset to their default values.(But the assignment of a channel having specific settings is not canceled.)

–

Settings of General Setting mode are not affected (retained).

ESCExits AVIO setting for specific areas, clearing the OSD.

– –

∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.

PLAY

All channels assigned to have specific settings are canceled, and the specific settings are reset to their default values.

–Settings of General Setting mode are not affected.

1 2 3 4

C

D

F

A

B

E

103

5 6 7 8

• Screen display when Specific Channel settings are made on 12 (maximum) channels: In such a case. If a channel which does not have specific settings is selected, the individual setting state for that channel is not displayed, as shown in the figure below, and the settings cannot be modified. In such a case, if you wish to make Specific Channel Settings for the currently selected channel, you must clear the Specific Channel Settings for one or more channels beforehand.

AVIO Specific Area Mode

Input - [ TUNER ]

Sync AGC : ON *



Std Det : Normal *



Sorry !

You can store only 12 channels

for Specific Area mode.

[With 12 channels having specific settings, when the currently selected channel does not have specific settings]

2. General Setting modeThis mode can be entered only during recording/playback stop. In this mode, each item and its current settings are displayed on the OSD. The currently selected input mode (TUNER or LINE) is displayed. If L1, L2, L3 or DV is selected for input, general settings for the line input can be made, and if TUNER is selected, general settings for the tuner input can be made.

AVIO Specific Area Mode

Input - [ tuner ]

Sync AGC : ON ∗Threshold : Normal *


Std Det : Normal *

HD Err Det : Normal ∗

[General Setting mode] (∗2)

∗ : setting is the default.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S104

1 2 3 4

Table 1: Key operations in General Setting mode (effective only during recording/playback stop)

∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.

Key Operation Setting (∗: Default) Remarks

INPUT SELECT,CHANNEL +/–(∗R)

Switches inputs or channels. – –

[SIDE A], [SIDE B] Sets Sync AGC.

[SPEED +], [SPEED -] HD Err Det

ON (∗) / OFF –

[Rev SCAN],[SCAN Fwd]

Sets V-Sync Det. Normal (∗) /Short/Long –

[Rev STILL STEP],[STILL STEP Fwd]

Sets Std Det. Normal (∗) /Non STD

Normal (∗) /Fast/Stop

–

–

–

–

[Rev ×3], [×3 Fwd]Sets Threshold level.

(∗) NormalAuto Threshold LevelManual Threshold LevelPedestal Level

–

[Rev CHAPTER SKIP][CHAPTER SKIP Fwd]

Sets Threshold level.

According to the setting of Threshold, the values can be changed within the range mentioned below.

–

• Normal: The value is fixed, with no display of the value.

–

• Auto Threshold Level: 0-8 (Default: 0)

• Manual Threshold Level: 0-8 (Default: 0)

• Pedestal Level: 0-8 (Default: 0)

CLEARInitializes the setting of General Setting mode.

–

Pressing the key resets all settings of General Setting mode to the initial values. Settings of Specific Channel Setting mode are not affected (they are retained).

ESCExits AVIO setting for specific areas, clearing the OSD.

– –

[Display in General Setting mode when the channel currently displayed has specific settings]

∗1 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.

AVIO Specific Area Mode Ver*.**

Input - [tuner ]

Sync AGC : ON *



Std Det : Normal *


This channel is set up

individually.

1 2 3 4

C

D

F

A

B

E

105

5 6 7 8

7.1.8 AGING MODE

Notes:Commands from the remote control unit are accepted during Aging mode.If Aging mode is quit using the ESC key, indications on the FL display will return to normal display.Cancel timer settings before entering Aging mode.Set the recording rate beforehand. It cannot be changed during Aging mode.

Aging for the DVD-RW Aging for the DVD-R

To enterAging mode

Press the DVD key to switch to DVD. Install a recordable DVD-RW disc. After disc detection, press the ESC key then the REP.B key on the remote control unit for servicing to enter Aging mode.

Press the DVD key to switch to DVD. Install a recordable DVD-R disc. After disc detection, press the ESC key then the REP.B key on the remote control unit for servicing to enter Aging mode.

To quitAging mode

Press the ESC key on the remote control unit for servicing to quit Aging mode and return to Normal mode. This also results in the following:• If during recording: Recording is stopped.• If during playback: Playback is paused.• If during initialization: The unit stops after initialization is

finished.• If the tray is being opened/closed: The unit stops after the

tray is opened/closed.

Press the ESC key on the remote control unit for servicing to quit Aging mode and return to Normal mode. This also results in the following:• If during recording: Recording is stopped.• If during playback: Playback is paused.

Function

During Aging mode, the following operations are repeated in the order shown below.1 The tray opens.2 The tray closes.3 Initialization4 Recording for 60 minutes5 Playback for 45 minutes

3 Initialization is performed according to the setting specified in "DVD-RW automatic initialization" (accessed by selecting "Unit Setting" then "Option").

During Aging, the number of loops is indicated on the FL display, as shown below. [AGING 0001]

If an error is generated, the aging operation stops.Note:Indications on the FL display are retained, and this information is also retained as an OSD.

During Aging mode, the following operations are repeated in the order shown below.1 The tray opens.2 The tray closes.3 Recording for 1 minute4 Recording pause for 6 minutes5 Recording stops.6 Playback for 1 minute7 Playback pause for 6 minutes8 Playback stops.Note:A continuous test of the above operations is possible for approximately 23 hours.

After 2 the tray closes, disc detection is performed, and if 99 titles have already been registered, the unit stops there. The number of loops is retained and indicated on the FL display. An error indication is retained as an OSD.



Note:Recording time depends on the recording rate set. For example, if the recording rate is MN32, only up to 60 titles can be registered. Check the setting for recording rate before performing aging.

* Be aware that all recorded data are deleted when the aging for the DVD-RW and HDD is executed.

Table 1: Aging for the DVD-RW and DVD-R

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S106

1 2 3 4

Aging for the HDD

To enterAging mode

Press the HDD key to switch to HDD. Press the ESC key then the REP.B key on the remote control unit for servicing to enter Aging mode.

To quitAging mode

Press the ESC key on the remote control unit for servicing to quit Aging mode and return to Normal mode. This also results in the following:• If during recording: Recording is stopped.• If during playback: Playback is paused.• If during erasure of all memory data from the HDD, the unit

stops after all memory data have been erased.

Function

During Aging mode, the following operations are repeated in the order shown below.1 Erasure of all the memory data from the HDD2 Recording for 60 minutes3 Playback for 60 minutes



Table 2: Aging for the HDD

1 2 3 4

C

D

F

A

B

E

107

5 6 7 8

7.1.9 SETUP SEQUENCE

DVD-R/RW DriveTuner/FL U-com System Codec IC (Inital Program Loader)

System Codec IC (Firmware)

Connect power cord.

Tuner/FL microcomputer starts up.

System microcomputer starts up.

Initialization of peripheral-circuit register, RAM, etc.


Starting communication with Tuner/FL microcomputer

Clock indication on FL display

Power ON ?

Waiting for communication to be

established Is ID check of drive OK?

LSI Check

No

Yes

Power ON, cancellation of reset

OK

NG

NG

NG

Has command arrived?

Yes

NoFLASH Check

Jumping to developed firmware

OK

"POWER ON" displayed on FL display

"POWER ON" displayed on FL display

Key-input and channel data transmitted to the system-control computer, and responding to instructions from it, indication displayed on FL display and channel switching performed

Yes

Downloading through RS232C required."MONITOR" displayed on FL display

LSI NG displayed on FL display

Drive microcomputer starts up.

ATA/ATAPI command processing


No

"CPRM ERR" displayed on FL display

OK

Firmware stored in Flash memory is developed in SD-RAM expandingthe compressed data.

Request for power off of system-control computer made to Tuner/FL microcomputer

System-control computer is turned off (entering standby) following request from Tuner/FL microcomputer

Obtaining LD temperature data from drive.

Is temperature below 59°C?

No

Repair process

Playback

Is disc in?

Is starting/ID check of HDD OK?

No

Yes

Is disc valid?

Yes

Repair required?

Yes

Yes

No

No

No

NoPlayback requested?

Yes

Stop

Tray Open

"HDD ERR" displayed on FL display

(∗1)

(∗1)

∗1: If both the drive ID check and starting/ID check of HDD failed, "CPRM ERR" is first displayed on FL display.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S108

1 2 3 4

7.1.10 DISASSEMBLY

1 Remove the bonnet case S by removing the eight screws.

2 Press the STANDBY/ON button to turn on the power.

3 Press the 0 OPEN/CLOSE button to open the tray.

4 Remove the tray panel.

5 Press the 0 OPEN/CLOSE button to close the tray.

6 Press the STANDBY/ON button to turn off the power.

Bonnet Case S and Tray panel1

1 Unhook the four hooks.

2 Remove the front panel section.

Front panel section2

35

4

1 1

1

2

3

1

2

1

3 5

2 6

Tray panel

Front panel section

Tray

Long thin pole

HDD

Aluminum tape

Binder

HDD stay

Emergency eject hole

Jack door

How to open the tray when the power cannot be on

When the player cannot eject disc tray due to power failure or any other reasons, open the jack door, and use a long thin pole and push the emergency eject hole under the tray panel to eject.

Bottom view

1 Remove the four screws.

2 Remove the binder.

3 Remove the aluminum tape.

4 Remove the HDD with HDD stay.

HDD Section3

Diagnosis of the MAIN Assy

Note 1 : Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common.

Note 2 : For performing the diagnosis shown below, the following jigs for service are required:• Jig cable : GGD1370

Front side

11

1

4

1 2 3 4

C

D

F

A

B

E

109

5 6 7 8

1 Remove the some jumper wires from the clamp.

2 Remove the binder.

3 Remove the some jumper wires from the SYPS cover.

4 Remove the six screws.

5 Disconnect the connector.

6 Remove the three tapes.

7 Remove the DRIVE Assy R7.

CN703

DRIVE Assy R7 (DVD-R/RW WRITER)4


2 Disconnect the flexible cable.

3 Stand the MAIN Assy.

MAIN Assy.

MAIN Assy5

12

3

5

6

7

SYPS cover DRIVE Assy R7

Clamp

CN5102

2

3

DRIVE Assy R7

JCKB Assy

Tape

6 Tape

6 Tape

DVJB Assy

41

1 1

1

444

4 4

Binder

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S110

1 2 3 4

1

1

11

Connect the jig.

2 Insert the insulation sheet between the MAIN Assy and base chassis.

3 Arrange the unit as shown in the photo below.

Caution :Main IC (IC1001) on the MAIN Assy generate heat to arround 80 degrees.Be careful when works.

Diagnosis6

SDEB Assy

Front panel section

Jig cable (GGD1370)

G

JCKB AssyB

POWER SUPPLY UnitJ

FRJB AssyFTUNB AssyA

DVJB Assy

DRIVE Assy R7HDD

K

ATHB AssyI

ATWB AssyH

MAIN AssyC

Diagnosis

2 Insulation sheet

IC1001

1 2 3 4

C

D

F

A

B

E

111

5 6 7 8

1 Remove the bonnet angle by removing the two screws. 5 Remove the bottom cover by removing the four screws.

6 Remove the front bezel by unhooking the two hooks.

7 Remove the one screw.

8 Remove the top cover.

2 Remove the writer stay L by removing the two screwswith the SYPS cover.

3 Remove the writer stay R by removing the two screws.

4 Remove the four aluminum tapes.

Front side

Front side

Cleaning the pickup lens

SYPS cover Bonnet angle

Writer stay L

Writer stay R

Bottom cover

Top cover

Bonnet angle

Aluminum tape

Bottom view

Bottom view

2 2

1

1

3

4

3

5 5

5 5

7

5

8

Aluminum tape4 Aluminum tape4

Aluminum tape4

Front bezel

Hook

6

Hook

6

6

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S112

1 2 3 4


Remove the clamper section.

11 Clean the pickup lens.

Pickup lens

Clamper section

Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools :

Cleaning liquid : GEM1004Cleaning paper : GED-008

9

9 9

910

1 2 3 4

C

D

F

A

B

E

113

5 6 7 8

7.2 IC

PEG035B (JCKB ASSY : IC202)• TUFL Microcomputer

PEG035B, TDA9818TS, LA73026AV, RS5C372A, LC75342M, LA73033M, AK5357VT, PST3428U, PST3809U M65673WG-A, UPD72852AGB-8EU, UPD72893AGD-LML

• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.

List of IC

No. Pin Name Signal Name I/O Function Active

1 P95/ANEX0/CLK4 FLCLK O FL Driver communication line CLK −

2 P94/DA1/TB4in SYNC I C-Sync of input video ↑

3 P93/DA0/TB3in AVLINKIN I Input line of NexTViewLink −

4 P92/TB2in/Sout3 IR I Pulse input of remote control −

5 P91/TB1in/Sin3 J_CLOCK I

6 P90/TB0in/CLK3 SYNCAFT I C-Sync of input video ↑

7 BYTE BYTE I

8 CNVss PGM I Communication line

9 P87/XCin NC (O) −

10 P86/XCout NC (O) −

11 -RESET XRESETIN I u-Con Reset

12 Xout XOUT I

13 Vss GND −

14 Xin XIN I

15 Vcc VCC −

16 P85/-NMI NMI I ↓

17 P84/-INT2 (JOGA) ( I ) Not used

Not used

Not used for straight model

Not used for straight model

for noise suppression when controling SCART power

18 P83/-INT1 SLICEONFB I Feedback from SLICEON pin ↑ ?

19 P82/-INT0 XINTRA I Alarm/interval interruption ↓

20 P81/TA4in LED_HDD (O) −

21 P80/TA4out LED_DVD (O) −

22 P77/TA3in PSAVE_MUTE O −

23 P76/TA3out FANPWM O FAN power control H

24 P75/TA2in (JOGB) ( I )

25 P74/TA2out NC (O) −

26 P73/-CTS2/-RTS2/TA1in NC O −

27 P72/CLK2/TA1out AVLINKOUT O Output line of NextViewLink H

28 P71/RxD2/SCL/TA0in/TB5in SCL I/O I2C communication (clock) −

29 P70/TxD2/SDA/TA0out SDA I/O I2C communication (data) −

30 Vss2 GND −

31 LP2 LP2 O

32 LP3 LP3 O

33 LP4 LP4 O

34 Vdd2 VDD2 −

35 M2 M2 I Mode switch

36 M1 M1 I

37 P11/SLICEON SLICEON O Slicer operating signal H?

38 P67/TxD1 TXD O Communication line for firmware download/monitor −

39 P66/RxD1 RXD I Communication line for firmware download/monitor −

40 P65/CLK1 SCLK (O) Communication line for firmware download/monitor −

Pin Function

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S114

1 2 3 4


41 P64/-CTS1/-RTS1/CLKS1 BUSY O Communication line for firmware download/monitor −

42 P63/TxD0 SSTTOM O SYS controller communication line (Tuner → Main) −

43 P62/RxD0 SSMTOT I SYS controller communication line (Main → Tuner) −

44 P61/CLK0 SCK I SYS controller communication line (clock) ↑

45 P60/-CTS0/-RTS0 HSTTOM O Tuner → SYS handshake L

46 P57/-RDY/CLKout DLCONT O Voltage supply SW of FLASH-ROM writing L

47 P56/ALE WRT O Write signal H

48 P55/-HOLD SDAEEP I/O SDA line for EEPROM −

49 P54/-HLDA SCLEEP O SCL line for EEPROM −

50 P53/BCLK VOLCE O Communication line CE H

51 P52/-RD VOLDATA O Communication line DATA −

52 P51/-WRH/-BHE VOLCLK O Communication line CLK −

53 P50/-WRL/-WR DLCE I Signal for serial I/O mode selection −

54 P47/-CS3 NC (O)

55 P46/-CS2 NC (O)

56 P45/-CS1 NC (O)

57 P44/-CS0 BLANK I BLANK signal input −

58 P43/A19 XTHROU O Through control of SCART1/2 L

59 P42/A18 NC (O)

60 P41/A17 EXTRGB O −

61 P40/A16 SWVION O Independent source SW for video I/O output circuit H

62 P37/A15 SWSTBY O Standby mode of video input selector H

63 P36/A14 NC (O)

64 P35/A13 BS15SRT I

65 P34/A12 SCTHRU O SCART loop through control during power OFF L

66 P33/A11 NC (O)

67 P32/A10 NC (O)

68 P31/A9 SDET2 I

−

−

S terminal detection of Video input 2 L

69 Vcc VCC

70 P30/A8 NC I −

71 Vss GND

72 P27/A7 NC (O)

73 P26/A6 NC (O)

74 P25/A5 NC (O)

75 P24/A4 NC (O)

76 P23/A3 P_SAVEBS O RF through output switch H

77 P22/A2 NC O −

78 P21/A1 NC O −

79 P20/A0 P_CONT O System Power ON H

80 P17/D15/-INT5 NC (O) −

1 2 3 4

C

D

F

A

B

E

115

5 6 7 8


81 P16/D14/-INT4 HSMTOT I SYS → Tuner handshake ↓

82 P15/D13/-INT3 DCTRI I Change detection of audio condition ↑

83 P14/D12 NC O −

84 P13/D11 SU/SAPID I

85 P12/D10 ST/STID I

86 P11/D9 XRESET O System Reset output L

87 P10/D8 LDASH O ColorSystem distinction signal H

88 P07/D7 STBYQ O EU multiplex decoder standby mode L

89 P06/D6 LM/ O ColorSystem distinction signal H

90 P05/D5 I/BG O ColorSystem distinction signal H

91 P04/D4 XP_SAVE O Power save control (SCART) L

92 P03/D3 TUON O Tuner power H

93 P02/D2 NC (O)

94 P01/D1 RSTCTL O Reset signal mask from the system controller L

95 P00/D0 FLPON O FL Driver Power ON H

96 P107/AN7/-KI3 MODEL1 A/D IN Input for destination judgment −

97 P106/AN6/-KI2 MODEL2 A/D IN Input for destination judgment −

98 P105/AN5/-KI1 AGC A/D IN Field intensity detection −

99 P104/AN4/-KI0 FUNC A/D IN Function signal input −

100 P103/AN3 KEY2 A/D IN Main unit key input −

101 P102/AN2 KEY1 A/D IN Main unit key input −

102 P101/AN1 C/N A/D IN −

103 Avss GND

104 P100/AN0 AFT A/D IN AFT voltage input −

105 VREF VREF

106 AVcc AVCC

107 P97/-ADTRG/Sin4 FLSTB O

−

−

−

−

−

−

−

I

Communication line strobe of FL driver L

108 Vdd1 VDD1

109 SYNCIN SYNCTEXT I Video input for sync. sep.

110 SVREF SLICE I Slice level input

111 Vss1 GND

112 Vdd3 VDD3

113 CVIN1 CVIN1 I Video input for teletext

114 Vss3 GND

115 FSCIN FSCIN Fsc input

116 P96/ANEX1/Sout4 FLDATA O Communication line data of FL driver −

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S116

1 2 3 4

QS

S M

IXE

RIN

TE

RC

AR

RIE

R M

IXE

RA

M D

EM

OD

ULA

TO

RS

IF A

MP

LIF

IER

SIF

AG

C

inte

rcar

rier

mod

e

INT

ER

CA

RR

IER

MO

DE

SW

ITC

HF

M-P

LLD

EM

OD

ULA

TO

R

9

mut

esw

itch

stan

dard

sse

lect

ion

switc

h

CS

AG

CC

de-e

mV

de-e

mC

DE

C

13 FM

inQ

SS

ST

D

123(

1)5

1011

audi

o

vide

oC

VB

S

1 V

(p-

p)

1.1

V (

p-p)

816

2021

1718

197(

1)6

15(1

)4

22

AF

C

AF

2 ×

f pc

L/L

acce

nt s

witc

han

d ad

just

TP

LLC

VA

GC

CB

LT

OP

LAD

JV

CO

2V

CO

1V

PG

ND

VIF

AM

PLI

FIE

RF

PLL

VIF

SA

W

SIF

SA

W24232114

VC

OT

WD

5.5

MH

z

VID

EO

DE

MO

DU

LAT

OR

AN

D A

MP

LIF

IER

SO

UN

DT

RA

P

AF

C

DE

TE

CT

OR

VO

LTA

GE

RE

FE

RE

NC

ET

UN

ER

AG

CT

AG

C

VIF

1

VIF

2

SIF

1

SIF

2

VIF

AG

C

TD

A98

18

MH

A66

3

• VIF/SIF ICTDA9818TS (TUNB ASSY : IC302)

1 2 3 4

C

D

F

A

B

E

117

5 6 7 8

PIN FUNCTION

SYMBOL PIN DESCRIPTION

VIF1 1 VIF differential input signal voltage 1

VIF2 2 VIF differential input signal voltage 2

STD 3 standards selection switch; note 1

CVAGC 4 VIF AGC capacitor

CSAGC 5 SIF AGC capacitor

TPLL 6 PLL filter

LADJ 7 L/L accent switch and adjust

AF 8 audio output

Vde-em 9 de-emphasis output

Cde-em 10 de-emphasis input

CDEC 11 decoupling capacitor

QSS 12 single reference QSS/intercarrieroutput voltage

FMin 13 sound intercarrier input voltage

TAGC 14 tuner AGC output

CBL 15 black level detector

CVBS 16 composite video output voltage

AFC 17 AFC output

VCO1 18 VCO1 resonance circuit

VCO2 19 VCO2 resonance circuit

GND 20 ground

VP 21 supply voltage

TOP 22 tuner AGC takeover point adjust

SIF1 23 SIF differential input signal voltage 1

SIF2 24 SIF differential input signal voltage 2

TDA9818

1

2

3

4

5

6

7

8

9

10

11

12

VIF1

VIF2

STD

CVAGC

CSAGC

TPLL

LADJ

AF

Vde-em

Cde-em

CDEC

QSS

SIF2

SIF1

TOP

VP

GND

VCO2

VCO1

AFC

CVBS

CBL

TAGC

FMin

24

23

22

21

20

19

18

17

16

15

14

13

PIN LAYOUT

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S118

1 2 3 4

No. Pin Name DC Voltage Function121011151633343637

AIN1RAIN1LAIN2RAIN2LAIN3RAIN3LAIN4LAIN4RAIN5LAIN5R

5.58VAudio input terminal

341935

EXTCTL1EXTCTL2EXTCTL3EXTCTL4

2.5mA, ON →0.75V

OFF →OPEN

5 VOUT

617273238

GNDGNDEXT-75ΩDR-GNDDEC-75Ω-GNDGND

0V

713182328

VIN1VIN2VIN3VIN4VIN5

1.8V

1.10V

Video input terminalSync-tip clampInput/Hi-impedance

General purpose outputOpencollector

Video output terminalPush-pull output/Low-impedance

8 PWRSAV 0.2V Power save mode select pin OPEN : L

9 AUMUTE 0.05V Control terminal for audio muteOPEN : L

Video driver output terminalPush-pull output/Low-impedance

Audio output terminalPush-pull output/Low-impedance

Audio output terminalPush-pull output/Low-impedance

Output terminal of audio muting

FSS control terminal Output H, M, L3 values with serial control

Terminal for Ref_DC ripple removing

Vcc for audio

Confirmed to IIC BUS. Data input terminal

Confirmed to IIC BUS. Clock input terminal

Control Vcc for Video

Always VCC for Video

12 REFFIL 4.94V

14 VCC12

20 FSSOUT H : Vcc-0.5VM : 6VL : 0V

21 DATA

22 CLOCK

24 VCC5A2526

VOUT75AVOUT75B

1.10V

29 VCC5B30314243

AOUT2LAOUT2RAOUT3LAOUT3R

4.91V

3940

AOUT1LAOUT1R

4.91V

4144

PWRMUTE1PWRMUTE2

0V

Pin Function

• Dual SCART Interface ICLA73026AV (JCKB ASSY : IC501)

1 2 3 4

C

D

F

A

B

E

119

5 6 7 8

Block Diagram

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S120

1 2 3 4

• Real Time Clock IC

32kHz OutputControl

AddressDecoder

AddressResister

I/OControl

OSCDetect

DriverCorrection

Time Counter(SEC, MIN, HOUR, WEEK, DAY, MONTH, YEAR)OSC

OSCIN

DIV

Comparator_B

Comparator_A

Shift ResisterInterrupt Control

Alarm_B Register(WEEK, MIN, HOUR)

Alarm_A Register(WEEK, MIN, HOUR)

7

OSCOUT 6

/INTRA 5

SCL2

VSS4

VDD8

SDA3/INTRB 1

No. Pin Name I/O Function

1 /INTRB O

Interruption output BThe output of 32.768kHz (in 32768Hz crystal use), cycled interrupt for CPU, or output alarm interrupt (ALARM_B). This pin output 32.768kHz when activated power from 0V.Nch open drain output.

2 SCL IShift clock inputSynchronize with this clock, and input and output data from a SDA terminal.Exceed VDD, and can input to 6V.

3 SDA I/OSerial input and outputSynchronize with SCL, and input and output writing data or readout data.Exceed VDD, and can input to 6V. Nch open drain output in the output.

4 VSS − Ground pin

5 /INTRA OInterruption output ACycled interrupt for CPU, or output alarm interruption (ALARM_A, ALARM_B). This pin becomes an OFF state when activated power from 0V. N ch open drain output.

6 OSCOUT O Oscillation circuit output Connect a crystal resonator of 32.768kHz or 32.000kHz between OSCIN and OSCOUT, and constitute oscillation circuit.(component parts of oscillation circuit except crystal resonator have it built-in.)7 OSCIN I Oscillation circuit input

8 VDD − Positive supply input

RS5C372A (JCKB ASSY : IC203)

Pin Function

Block Diagram

1 2 3 4

C

D

F

A

B

E

121

5 6 7 8

• Electric Volume IC

11

10

L4

LSE

LO

9

LIN

8

LTR

E

7

LBA

SS

1

8

LBA

SS

2

5

4

LOU

T

TEST

2 CE

3 VSS

1 DI

30 CL

28 Vref

27 NC

29 VDD

12L3

13L2

14L1

15NC

20R4

19R3

18R2

17R1

16NC

21

RS

ELO

22

RIN

23

RT

RE

24

RB

AS

S1

25

RB

AS

S2

26

RO

UT

ControlCircuit

LogicCircuit

CCBInterface

LVref

RVref

ControlCircuit

No. Pin Name Function No. Pin Name Function1 DI Serial data input for control 16 NC Not connected

2 CE

Chip enable pinData are written in the internal latch by a timing of "H" → "L", and each analog switch works.Data transfer is enabled by "H" level.

17 R1

Input signal pin3 VSS Ground pin 18 R2

4 TESTPin for electronic volume testSet to VSS electric potential.

19 R3

5 LOUT Volume and equalizer output pin 20 R4

6 LBASS2 Capacitor and resistor connection pins for bus bandpass filter

21 RSELO Input selector output pin

7 LBASS1 22 RIN Volume and equalizer input pin

8 LTRECapacitor connection pin for treble bandpass filter

23 RTRECapacitor connection pin for treble bandpass filter

9 LIN Volume and equalizer input pin 24 RBASS1 Capacitor and resistor connection pins for bus bandpass filter10 LSELO Input selector output pin 25 RBASS2

11 L4

Input signal pins

26 ROUT Volume and equalizer output pin

12 L3 27 NC Not connected

13 L2 28 Vref 0.5XVDD voltage generation block

14 L1 29 VDD Power supply pin

15 NC Not connected 30 CL Clock input pin for control

LC75342M (JCKB ASSY : IC601)

Pin Function

Block Diagram

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S122

1 2 3 4

• Video selector and Video driverLA73033M (JCKB ASSY : IC701)

Block Diagram

1 2 3 4

C

D

F

A

B

E

123

5 6 7 8

• 96kHz 24 bit ∆∑ ADC

AINL

AINR 1

∆∑Modulator2

AINR ∆∑Modulator1

VCOM

DIF

SCLK

SDTO

LRCK

MCLK

VoltageReference

DecimationFilter

DecimationFilter

Serial I/OInterface

ClockDivider

4

14

10

12

9

11

DGND

8

VD

7

AGND

5

VA

6

PDN

13

CKS0

16

CKS1

3

CKS2

15

AINL 2

CKS1 3

VCOM 4

AGND 5

VA 6

VD 7

DGNS 8

16 CKS0

15 CKS2

14 DIF

13 PDN

12 SCLK

11 MCLK

10 LRCK

9 SDTO

No. Pin Name I/O Function1 AINR I R ch analog input

2 AINL I L ch analog input

3 CKS1 I Mode select 1

4 VCOM O Common voltage output, bias voltage of VA/2 and ADC input

5 AGND − Analog ground

6 VA − Analog power supply, 2.7 to 5.5V

7 VD − Digital power supply, 2.7 to 5.5V

8 DGND − Digital ground

9 SDTO O Audio serial data output, outputs "L" in the power down mode.

10 LRCK I/O Channel clock I/O, outputs "L" by master mode in the power down mode.

11 MCLK I Master clock input

12 SCLK I/O Audio serial data clock, outputs "L" by master mode in the power down mode.

13 PDN I Power down mode "H": power up, "L": power down

14 DIF I Audio interface format, "H" : 24 bit I2S compatibility, "L" : 24 bit MSB justify



AK5357VT (MAIN ASSY : IC3101)

Pin Function

Pin Arrangement (Top view) Block Diagram

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S124

1 2 3 4

• Reset IC

VDD

VOUT

VOUT 1

Vref

2

1

VSS 4

VDD 2

4 VSS

3 NC

No. Pin Name Function1 VOUT Reset signal output

2 VDD Power supply / voltage detection

3 NC Not connected

4 VSS VSS

PST3428U (MAIN ASSY : IC4003)

Pin Function


VDD

OUT

OUT 1

Vref

2

1

GND 4

VDD 2

4 GND

3 NC

No. Pin Name Function1 OUT Reset signal output

2 VDD Power supply / voltage detection

3 NC Not connected

4 GND Ground

• Reset ICPST3809U (MAIN ASSY : IC4005)

Pin Function


1 2 3 4

C

D

F

A

B

E

125

5 6 7 8

A

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE AF AG AH

Buffer Name Main Function RemarksPDIDGZ Input buffer (5V tolerant)

PDUDGZ Input buffer (5V tolerant), pull-up

PDDDGZ Input buffer (5V tolerant), pull-down

PDO04CDG Output buffer, 4mA

PDO08CDG Output buffer, 8mA

PDO0204DGZ Output buffer, 2/4mA

PDO0406DSGZ Output buffer, 4/6mA For SDRAM IF

PDO0406DSGZ×2 Output buffer, 8/12mA For SDRAM IF

PDT0204DGZ 3 state output buffer, 2/4mA

PDB04DGZ Bidirectional buffer, 4mA

PDB08DGZ Bidirectional buffer, 8mA

PDB0204DGZ Bidirectional buffer, 2/4mA

PDB0406DSGZ Bidirectional buffer, 4/6mA For SDRAM IF

• Signal Processing IC for DVD RecorderM65673WG-A (MAIN ASSY : IC1001)

Pin Arrangement (Top view)

I/O buffer list

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S126

1 2 3 4

VDD

EDAT

A[23

]ED

ATA[

22]

EDAT

A[20

]ED

ATA[

18]

EDAT

A[16

]EA

DRS[

0]EB

S[0]

ERAS

EDQ

MED

ATA[

6]ED

ATA[

3]ED

ATA[

0]AV

DDAD

8BG

8VR

B8AV

DDAD

8VR

M10

AVDD

AD10

PACK

ETEN

WM

2DTO

[2]

VDD

WM

CLKO

WM

1DTO

[4]

WM

1DTI

[1]

WM

1DTI

[3]

HKEY

PLS

VDD

AB

CD

EF

GH

JK

LM

NP

RT

UV

WY

AA

AB

AC

AD

AE

AF

AG

AH

AB

CD

EF

GH

JK

LM

NP

RT

UV

WY

AA

AB

AC

AD

AE

AF

AG

AH

AT1D

ATA[

12]

EDAT

A[24

]ED

ATA[

25]

EDAT

A[21

]ED

ATA[

19]

EDAT

A[17

]EA

DRS[

1]EB

S[1]

ECS

EWE

EDAT

A[7]

EDAT

A[4]

EDAT

A[1]

AVSS

AD8

GIN

VRT8

DVSS

AD10

CVBS

INVB

GR1

0ST

REAM

WM

2DTQ

[4]

WM

2DTO

[6]

WM

1DTO

[1]

WM

1DTO

[6]

WM

1DTI

[4]

PEDC

TLRE

C656

O[1

]RE

C656

O[3

]

AT1D

ATA[

8]AT

1DAT

A[13

]AT

1DAT

A[15

]ED

ATA[

26]

EDAT

A[29

]ED

ATA[

30]

EADR

S[2]

EADR

S[10

]EA

DRS[

11]

ECAS

EDAT

A[8]

EDAT

A[5]

EDAT

A[2]

DVSS

AD8

CRIN

CIN

VRBD

10VR

T10

NBC1

0SY

NCW

M2D

TO[3

]W

M1D

TO[0

]W

M1D

TO[5

]W

M1D

TI[2

]W

M1D

TI[7

]AC

CCTL

REC6

56O

[2]

AVDD

2DA1

0

AT1D

ATA[

7]AT

1DAT

A[6]

AT1D

ATA[

14]

EDAT

A[27

]ED

ATA2

8]ED

ATA[

31]

EADR

S[4]

EADR

S[6]

EADR

S[8]

ECLK

ENED

ATA[

9]ED

ATA[

11]

EDAT

A[13

]DV

DDAD

8AV

DDAD

8AV

SSAD

8VR

B10

AVSS

AD10

TSRW

WM

2DTO

[0]

WM

2DTO

[7]

WM

1DTO

[2]

WM

1DTI

[0]

WM

1DTI

[6]

AGCC

TLRE

C656

O[5

]YO

UTAV

SS2D

A10

AT1D

ATA[

2]AT

1DAT

A[1]

AT1D

ATA[

5]AT

1DAT

A[10

]AT

1DAT

A[14

]ED

ATA[

3]EA

DRS[

5]EA

DRS[

7]EA

DRS[

9]EC

LKO

EDAT

A[10

]ED

ATA[

12]

EDAT

A[14

]ED

ATA[

15]

AVSS

AD8

DVDD

AD10

VRTD

10TS

CLK

WM

2DTO

[1]

WM

2DTO

[4]

WM

1DTO

[3]

WM

2DTC

[1]

WM

1DTI

[5]

REC6

56O

[0]

COUT

IREF

[1]

ROUT

AVDD

1DA1

0

AT1D

IOW

AT1D

MAC

KAT

1DAT

A[0]

AT1D

ATA[

3]AT

1DAT

A[9]

GND

VDD3

VDD

GND

VDD3

VDD

GND

VDD3

VDD

GND

VDD2

VDD

GND

VDD2

VDD

GND

VDD3

VDD

REC6

56O

[4]

AVDD

1DA1

0BO

UTDV

ACK

DVRE

Q

AT1A

DR[1

]AT

1INT

RQAT

1DIO

RAT

1RES

ETAT

1DAT

A4]

VDD3

VDD3

IREF

[0]

AVSS

1DA1

0RE

C656

O[6

]DV

VIDE

O[0

]DV

VIDE

O[1

]

AT1C

S[0]

AT1C

S[1]

AT1A

DR[0

]AT

1IO

RDY

AT1D

MAR

QVD

DVD

DG

OUT

REC6

56O

[7]

DVVI

DEO

[3]

DVVI

DEO

[4]

PLL2

AVSS

AT2D

ATA[

11]

AT2D

ATA[

12]

AT1D

ATA[

13]

AT2D

ATA[

14]

AT1A

DR[2

]G

NDG

NDDV

VIDE

O[2

]AD

MCL

KIPL

L2AV

DDDV

VCLK

IDV

VIDE

O[7

]

AT2D

ATA[

6]AT

2DAT

A[7]

AT2D

ATA[

8]AT

2DAT

A[10

]AT

2DAT

A[15

]VD

D3VD

D3R6

56CL

KIDV

VIDE

O[5

]RE

C656

I[0]

REC6

56I[1

]RE

C656

I[2]

AT2D

ATA[

1]AT

2DAT

A[2]

AT2D

ATA[

4]AT

2DAT

A[5]

AT2D

ATA[

9]VD

DVD

DDV

VIDE

O[6

]RE

C656

I[3]

REC6

56I[4

]RE

C656

I[6]

REC6

56I[7

]

AT2D

IOW

AT2D

MAR

QAT

2RES

ETAT

2DAT

A[0]

AT2D

ATA[

3]G

NDG

NDG

NDG

NDG

NDG

NDG

NDG

NDRE

C656

I[5]

PXCL

KDV

VCLK

OPL

LRST

TRST

AT2A

DR[2

]AT

2INT

RQAT

2IO

RDY

AT2D

IOR

AT2D

MAC

KVD

D3G

NDG

NDG

NDG

NDG

NDG

NDVD

D3TC

KTD

ITD

OTM

SPL

LON

AT2M

ODE

AT2C

S[0]

AT2C

S[1]

AT2A

DR[0

]AT

2ADR

[1]

VDD

GND

GND

GND

GND

GND

GND

VDD

VIPW

MCS

YNC

TEST

MO

D[0]

TEST

MO

D[1]

TEST

MO

D[2]

RESE

TVD

DDB

ITR

ACE

VDD

GND

GND

GND

GND

GND

GND

GND

VDD

TEST

MO

D[6]

VDD

TEST

MO

D[5]

TEST

MO

D[4]

TEST

MO

D[3]

PCO

PLL3

AVSS

PLL3

AVDD

VMCL

KPL

L1AV

DDVD

D3G

NDG

NDG

NDG

NDG

NDG

NDVD

D3HA

DRS[

28]

HADR

S[29

]HA

DRS[

24]

HADR

S[25

]HA

DRS[

26]

PLL1

AVSS

ADCC

LKO

VDD

DVAM

CLKO

DVAM

CLKI

VDD

GND

GND

GND

GND

GND

GND

GND

HADR

S[27

]HA

DRS[

19]

HADR

S[18

]HA

DRS[

23]

HADR

S[22

]

DACC

LKO

AMCL

K1AM

CLK2

ARDA

TA[1

]AR

DATA

[0]

GND

VDD

HADR

S[15

]HA

DRS[

16]

HADR

S[17

]HA

DRS[

20]

HADR

S[21

]

ARDA

TA[1

4]AR

DATA

[15]

ARDA

TA[4

]AR

DATA

[3]

ARDA

TA[2

]VD

D2VD

D3HD

CS[1

]HD

CS[0

]HC

ASHR

ASHC

LKEN

ARDA

TA[1

1]AR

DATA

[12]

ARDA

TA[1

3]AR

DATA

[6]

ARDA

TA[5

]VD

DG

NDHD

ATA[

7]HD

WE

DQM

WS[

0]DQ

MW

S[1]

HCLK

O

ARDA

TA[1

0]AR

DATA

[9]

ARW

EAR

DQM

[0]

ARDA

TA[7

]G

NDVD

DHD

ATA[

6]HD

ATA[

5]HD

ATA[

4]HD

ATA[

8]HD

ATA[

9]

ARDA

TA[8

]AR

DQM

[1]

ARCS

[0]

ARRA

SAR

CAS

VDD3

VDD3

HADR

S[9]

HDAT

A[2]

HDAT

A[3]

HDAT

A11]

HDAT

A[10

]

ARCL

KOAR

ADRS

[12]

ARAD

RS[1

3]AR

ADRS

[14]

ARCS

[1]

VDD

VDD3

GND

VDD

VDD3

VDD

GND

VDD3

VDD

GND

VDD3

VDD

GND

VDD3

VDD

GND

VDD3

VDD

HADR

S[10

]HD

ATA[

1]HD

ATA[

0]HD

ATA[

12]

HDAT

A[13

]

ARAD

RS[1

1]AR

ADRS

[9]

ARAD

RS[1

]AR

ADRS

[0]

ARAD

RS[1

0]SP

DIFI

ACM

OD[

0]BC

KODV

DADT

[4]

DVDA

ADR[

0]SC

IDAT

A[0]

SPID

ATAO

DDAT

A[11

]DD

ATA[

8]DC

LKO

DADR

S[9]

DADR

S[8]

INT[

7]IN

T[1]

CTS[

2]RT

S[0]

TX[3

]HW

AIT

HCS[

5]HA

DRS[

11]

HADR

S[12

]HD

ATA[

15]

HDAT

A[14

]

ARAD

RS[8

]AR

ADRS

[3]

ARAD

RS[2

]SR

CBCK

ISR

CDAT

AOAC

MO

D[1]

LRCK

ODV

DADT

[3]

DVDA

REQ

SCID

ATA[

1]SP

ICS

DDAT

A[14

]DD

ATA[

12]

DDAT

A[9]

DDQ

M[1

]DA

DRS[

11]

DADR

S[7]

DADR

S[6]

INT[

6]IN

T[2]

CTS[

1]RX

[3]

TX[2

]HD

ACK[

0]VD

DHC

S[0]

HADR

S[13

]HA

DRS[

14]

ARAD

RS[7

]AR

ADRS

[6]

SRCL

RCKI

SRCL

RCKO

DVBC

KAD

ATAI

DVDA

DT[5

]DV

DADT

[1]

DVDA

ACK

VDD

SPID

ATAI

DDAT

A[15

]DD

ATA[

13]

DDAT

A[10

]DW

EDC

SDA

DRS[

10]

DADR

S[5]

DADR

S[4]

INT[

3]SC

LK[0

]CT

S[0]

RX[2

]TX

[1]

HDRE

Q[0

]HC

S[3]

HCS[

2]HA

DRS[

30]

ARAD

RS[5

]AR

ADRS

[4]

SRCB

CKO

SPDI

FOBC

KIDV

DADT

[7]

DVDA

DT[6

]DV

DADT

[0]

SCIC

S[1]

SCIC

LK[1

]SP

ICLK

DDAT

A[2]

DDAT

A[3]

DDAT

A[6]

DDQ

M[0

]DR

ASDB

S[1]

DADR

S[1]

DADR

S[2]

INT[

4]SC

LK[1

]RT

S[3]

RTS[

2]RX

[1]

HDAC

K[1]

HOE

HCS[

4]HC

S[1]

VDD

28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1SR

CDAT

AIDV

LRCK

DVAD

ATA

LRCK

IAD

ATAO

DVDA

DT[2

]DV

DAAD

R[1]

SCIC

S[0]

SCIC

LK[0

]DD

ATA[

0]DD

ATA[

1]DD

ATA[

4]DD

ATA[

5]DD

ATA[

7]DC

ASDB

S[0]

DADR

S[0]

DADR

S[3]

INT[

5]IN

T[0]

CTS[

3]RT

S[1]

RX[0

]TX

[0]

HDRE

Q[1

]NC

NC

VDD

VDD3

GND

: 1.2

V P

ower

sup

ply

: 3.3

V P

ower

sup

ply

: Gro

und

Pin Name list

1 2 3 4

C

D

F

A

B

E

127

5 6 7 8

No. BALLAddress Pin Name I/O Function No. BALL

Address Pin Name I/O Function

1 VDD3 VDD3 − 3.3V I/O power supply 56 V26 VRT10 −2 GND GND − Ground 57 V28 VRM10 −3 VDD VDD − 1.2V LOGIC power supply 58 U25 VRB10 −4 AH28 VDD − 1.2V LOGIC power supply 59 U26 VRBD10

5 AF26 ACCCTL O 60 U27 DVSSAD10 −

I/O

6 AF27 PEDCTL O VIDEO-Analog, Output buffer 61 T24 DVDDAD10 −7 AG28 HKEYPLS O VIDEO-Analog, Output buffer 62 GND GND − Ground

8 GND GND − Ground 63 VDD VDD − 1.2V LOGIC power supply

TOP side reference voltage

Common voltage

Bottom side reference voltage

Analog test bus (for debugging)

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

9 AE26 WM1DTI[7] I/O WM/VWM, Bidirectional buffer 64 U28 AVDDAD8 −10 AD25 WM1DTI[6] I/O WM/VWM, Bidirectional buffer 65 T25 AVSSAD8 −11 AC24 WM1DTI[5] I/O WM/VWM, Bidirectional buffer 66 T26 CIN I

12 AE27 WM1DTI[4] I/O WM/VWM, Bidirectional buffer 67 T27 VRT8 −13 AF28 WM1DTI[3] I/O WM/VWM, Bidirectional buffer 68 T28 VRB8 −14 AD26 WM1DTI[2] I/O WM/VWM, Bidirectional buffer 69 R25 AVDDAD8 −15 AE28 WM1DTI[1] I/O WM/VWM, Bidirectional buffer 70 R24 AVSSAD8 −16 AC25 WM1DTI[0] I/O WM/VWM, Bidirectional buffer 71 R26 CRIN I

17 AB24 WM1DTO[7] I/O WM/VWM, Bidirectional buffer 72 R28 BG8 −18 VDD VDD − 1.2V LOGIC power supply 73 P28 AVDDAD8 −19 GND GND − Ground 74 P27 AVSSAD8 −20 AD27 WM1DTO[6] I/O WM/VWM, Bidirectional buffer 75 R27 GIN I

21 AC26 WM1DTO[5] I/O WM/VWM, Bidirectional buffer 76 P26 DVSSAD8 −22 AD28 WM1DTO[4] I/O WM/VWM, Bidirectional buffer 77 P25 DVDDAD8 −23 AA24 WM1DTO[3] I/O WM/VWM, Bidirectional buffer 78 GND GND − Ground

24 AB25 WM1DTO[2] I/O WM/VWM, Bidirectional buffer 79 P24 EDATA[15] I/O SDRAM ENC, Bidirectional buffer

25 VDD VDD − 1.2V LOGIC power supply 80 VDD3 VDD3 − 3.3V I/O power supply

26 AC27 WM1DTO[1] I/O WM/VWM, Bidirectional buffer 81 N28 EDATA[0] I/O SDRAM ENC, Bidirectional buffer

27 GND GND − Ground 82 N27 EDATA[1] I/O SDRAM ENC, Bidirectional buffer

28 AC28 WMCLKO O WM/VWM, Output buffer 83 N26 EDATA[2] I/O SDRAM ENC, Bidirectional buffer

29 VDD3 VDD3 − 3.3V I/O power supply 84 VDD VDD − 1.2V LOGIC power supply

30 AB26 WM1DTO[0] I/O WM/VWM, Bidirectional buffer 85 N25 EDATA[13] I/O SDRAM ENC, Bidirectional buffer

31 AA25 WM2DTO[7] O WM/VWM, Output buffer 86 GND GND − Ground

32 AB27 WM2DTO[6] O WM/VWM, Output buffer 87 M28 EDATA[3] I/O SDRAM ENC, Bidirectional buffer

33 AB28 VDD − 1.2V LOGIC power supply 88 GND GND − Ground

34 Y24 WM2DTO[5] O WM/VWM, Output buffer 89 N24 EDATA[14] I/O SDRAM ENC, Bidirectional buffer

35 AA27 WM2DTO[4] O WM/VWM, Output buffer 90 M27 EDATA[4] I/O SDRAM ENC, Bidirectional buffer

36 AA26 WM2DTO[3] O WM/VWM, Output buffer 91 M26 EDATA[5] I/O SDRAM ENC, Bidirectional buffer

37 AA28 WM2DTO[2] O WM/VWM, Output buffer 92 VDD3 VDD3 − 3.3V I/O power supply

38 W24 WM2DTO[1] O WM/VWM, Output buffer 93 M25 EDATA[11] I/O SDRAM ENC, Bidirectional buffer

39 GND GND − Ground 94 L28 EDATA[6] I/O SDRAM ENC, Bidirectional buffer

40 Y25 WM2DTO[0] O WM/VWM, Output buffer 95 L27 EDATA[7] I/O SDRAM ENC, Bidirectional buffer


42 Y26 SYNC I/O TS OUT, Bidirectional buffer 97 M24 EDATA[12] I/O SDRAM ENC, Bidirectional buffer

43 Y27 STREAM I/O TS OUT,Bidirectional buffer 98 GND GND − Ground

44 Y28 PACKETEN I/O TS OUT,Bidirectional buffer 99 L26 EDATA[8] I/O SDRAM ENC, Bidirectional buffer

45 VDD3 VDD3 − 3.3V IO power supply

ADC part analog power supply (3.3V)

ADC part analog Ground

100 GND GND − Ground

46 W25 TSRW O TS OUT,Output buffer 101 L25 EDATA[9] I/O SDRAM ENC, Bidirectional buffer

47 GND GND − Ground 102 K28 EDQM O SDRAM ENC, Output buffer

48 V24 TSCLK O TS OUT,Output buffer

Bias current adjustment terminal

Analog test bus (for debugging)

Analog Input

Input common bias

103 K27 EWE O SDRAM ENC, Output buffer

49 VDD3 VDD3 − 3.3V I/O power supply 104 VDD3 VDD3 − 3.3V I/O power supply

50 W26 NBC10 − 105 K26 ECAS O SDRAM ENC, Output buffer

51 W27 VBGR10 I/O 106 L24 EDATA[10] I/O SDRAM ENC, Bidirectional buffer

52 W28 AVDDAD10 − 107 K25 ECLKEN O Output buffer, 4/6mA

53 V25 AVSSAD10 − 108 VDD VDD − 1.2V LOGIC power supply

54 V27 CVBSIN I 109 J28 ERAS O SDRAM ENC, Output buffer

55 U24 VRTD10 − 110 GND GND − Ground

Pin Function

ADC part digital power supply (3.3V)

ADC part digital ground

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S128

1 2 3 4



111 J27 ECS O SDRAM ENC, Output buffer 166 VDD3 VDD3 − 3.3V I/O power supply

112 GND GND − Ground 167 C25 AT1DATA[11] I/O ATAPI-DVD, Bidirectional buffer

113 J26 EADRS[11] O SDRAM ENC, Output buffer 168 D24 AT1DATA[10] I/O ATAPI-DVD, Bidirectional buffer

114 J25 EADRS[8] O SDRAM ENC, Output buffer 169 E23 AT1DATA[9] I/O ATAPI-DVD, Bidirectional buffer

115 GND GND − Ground 170 GND GND − Ground

116 K24 ECLKO O SDRAM ENC, Output buffer 171 A26 AT1DATA[8] I/O ATAPI-DVD, Bidirectional buffer

117 VDD3 VDD3 − 3.3V I/O power supply 172 A25 AT1DATA[7] I/O ATAPI-DVD, Bidirectional buffer

118 H28 EBS[0] O SDRAM ENC, Output buffer 173 B25 AT1DATA[6] I/O ATAPI-DVD, Bidirectional buffer

119 H27 EBS[1] O SDRAM ENC, Output buffer 174 GND GND − Ground

120 H26 EADRS[10] O SDRAM ENC, Output buffer 175 C24 AT1DATA[5] I/O ATAPI-DVD, Bidirectional buffer


122 G28 EADRS[0] O SDRAM ENC, Output buffer 177 E22 AT1DATA[4] I/O ATAPI-DVD, Bidirectional buffer


124 J24 EADRS[9] O SDRAM ENC, Output buffer 179 D23 AT1DATA[3] I/O ATAPI-DVD, Bidirectional buffer

125 GND GND − Ground 180 A24 AT1DATA[2] I/O ATAPI-DVD, Bidirectional buffer

126 G27 EADRS[1] O SDRAM ENC, Output buffer 181 B24 AT1DATA[1] I/O ATAPI-DVD, Bidirectional buffer

127 H25 EADRS[6] O SDRAM ENC, Output buffer 182 GND GND − Ground

128 G26 EADRS[2] O SDRAM ENC, Output buffer 183 C23 AT1DATA[0] I/O ATAPI-DVD, Bidirectional buffer

129 VDD3 VDD3 − 3.3V I/O power supply 184 D22 AT1RESET O Output buffer,8mA

130 F27 EDATA[17] I/O SDRAM ENC, Bidirectional buffer 185 E21 AT1DMARQ I ATAPI-DVD, Input buffer

131 F28 EDATA[16] I/O SDRAM ENC, Bidirectional buffer 186 GND GND − Ground

132 H24 EADRS[7] O SDRAM ENC, Output buffer 187 B23 AT1DMACK O ATAPI-DVD, Output buffer


134 G25 EADRS[4] O SDRAM ENC, Output buffer 189 A23 AT1DIOW O ATAPI-DVD, Output buffer


136 F26 EDATA[30] I/O SDRAM ENC, Bidirectional buffer 191 C22 AT1DIOR O ATAPI-DVD, Output buffer

137 GND GND − Ground 192 D21 AT1IORDY I ATAPI-DVD, Input buffer

138 E27 EDATA[19] I/O SDRAM ENC, Bidirectional buffer 193 B22 AT1INTRQ I ATAPI-DVD, Input buffer

139 E28 EDATA[18] I/O SDRAM ENC, Bidirectional buffer 194 GND GND − Ground

140 F25 EDATA[31] I/O SDRAM ENC, Bidirectional buffer 195 E20 AT1ADR[2] O ATAPI-DVD, Output buffer

141 VDD3 VDD3 − 3.3V I/O power supply 196 A22 AT1ADR[1] O ATAPI-DVD, Output buffer

142 E26 EDATA[29] I/O SDRAM ENC, Bidirectional buffer 197 C21 AT1ADR[0] O ATAPI-DVD, Output buffer

143 G24 EADRS[5] O SDRAM ENC, Output buffer 198 GND GND − Ground

144 D28 EDATA[20] I/O SDRAM ENC, Bidirectional buffer 199 B21 AT1CS[1] O ATAPI-DVD, Output buffer


146 D27 EDATA[21] I/O SDRAM ENC, Bidirectional buffer 201 A21 AT1CS[0] O ATAPI-DVD, Output buffer


148 C28 EDATA[22] I/O SDRAM ENC, Bidirectional buffer 203 E19 AT2DATA[15] I/O ATAPI-HDD, Bidirectional buffer

149 GND GND − Ground 204 D20 AT2DATA[14] I/O ATAPI-HDD, Bidirectional buffer

150 F24 EADRS[3] O SDRAM ENC, Output buffer 205 C20 AT2DATA[13] I/O ATAPI-HDD, Bidirectional buffer

151 E25 EDATA[28] I/O SDRAM ENC, Bidirectional buffer 206 GND GND − Ground

152 D26 EDATA[26] I/O SDRAM ENC, Bidirectional buffer 207 B20 AT2DATA[12] I/O ATAPI-HDD, Bidirectional buffer

153 VDD3 VDD3 − 3.3V I/O power supply 208 A20 AT2DATA[11] I/O ATAPI-HDD, Bidirectional buffer

154 B28 EDATA[23] I/O SDRAM ENC, Bidirectional buffer 209 D19 AT2DATA[10] I/O ATAPI-HDD, Bidirectional buffer

155 C27 EDATA[25] I/O SDRAM ENC, Bidirectional buffer 210 GND GND − Ground

156 B27 EDATA24] I/O SDRAM ENC, Bidirectional buffer 211 E18 AT2DATA[9] I/O ATAPI-HDD, idirectional buffer


158 D25 EDATA[27] I/O SDRAM ENC, Bidirectional buffer 213 C19 AT2DATA[8] I/O ATAPI-HDD, Bidirectional buffer


160 C26 AT1DATA[15] I/O ATAPI-DVD, Bidirectional buffer 215 B19 AT2DATA[7] I/O ATAPI-HDD, Bidirectional buffer

161 E24 AT1DATA[14] I/O ATAPI-DVD, Bidirectional buffer 216 A19 AT2DATA[6] I/O ATAPI-HDD, Bidirectional buffer

162 GND GND − Ground 217 D18 AT2DATA[5] I/O ATAPI-HDD, Bidirectional buffer

163 A28 VDD − 1.2V LOGIC power supply 218 GND GND − Ground

164 B26 AT1DATA[13] I/O ATAPI-DVD, Bidirectional buffer 219 C18 AT2DATA[4] I/O ATAPI-HDD, Bidirectional buffer

165 A27 AT1DATA[12] I/O ATAPI-DVD, Bidirectional buffer 220 E17 AT2DATA[3] I/O ATAPI-HDD, Bidirectional buffer

1 2 3 4

C

D

F

A

B

E

129

5 6 7 8



221 B18 AT2DATA[2] I/O ATAPI-HDD, Bidirectional buffer 276 VDD3 VDD3 − 3.3V I/O power supply

222 GND GND − Ground 277 C11 AMCLK2 I CLOCK, Input buffer

223 A18 AT2DATA[1] I/O ATAPI-HDD, Bidirectional buffer 278 GND GND − Ground

224 VDD3 VDD3 − 3.3V I/O power supply 279 D11 ARDATA[1] I/O SDRAM-ATAPI, Bidirectional buffer

225 D17 AT2DATA[0] I/O ATAPI-HDD, Bidirectional buffer 280 VDD3 VDD3 − 3.3V I/O power supply

226 VDD VDD − 1.2V LOGIC power supply 281 A10 ARDATA[14] I/O SDRAM-ATAPI, Bidirectional buffer

227 C17 AT2RESET I/O ATAPI-HDD, Bidirectional buffer 282 VDD VDD − 1.2V LOGIC power supply

228 B17 AT2DMARQ I ATAPI-HDD, Input buffer 283 B10 ARDATA[15] I/O SDRAM-ATAPI, Bidirectional buffer

229 E16 AT2DMACK O ATAPI-HDD, Output buffer 284 E11 ARDATA[0] I/O SDRAM-ATAPI, Bidirectional buffer

230 GND GND − Ground 285 C10 ARDATA[4] I/O SDRAM-ATAPI, Bidirectional buffer

231 A17 AT2DIOW O ATAPI-HDD, Output buffer 286 GND GND − Ground

232 D16 AT2DIOR O ATAPI-HDD, Output buffer 287 D10 ARDATA[3] I/O SDRAM-ATAPI, Bidirectional buffer

233 C16 AT2IORDY I ATAPI-HDD, Input buffer 288 A9 ARDATA[11] I/O SDRAM-ATAPI, Bidirectional buffer

234 GND GND − Ground 289 B9 ARDATA[12] I/O SDRAM-ATAPI, Bidirectional buffer

235 B16 AT2INTRQ I ATAPI-HDD, Input buffer 290 GND GND − Ground

236 VDD3 VDD3 − 3.3V I/O power supply 291 C9 ARDATA[13] I/O SDRAM-ATAPI, Bidirectional buffer

237 A16 AT2ADR[2] I/O ATAPI-HDD, Bidirectional buffer 292 E10 ARDATA[2] I/O SDRAM-ATAPI, Bidirectional buffer

238 VDD VDD − 1.2V LOGIC power supply 293 D9 ARDATA[6] I/O SDRAM-ATAPI, Bidirectional buffer

239 E15 AT2ADR[1] I/O ATAPI-HDD, Bidirectional buffer 294 VDD3 VDD3 − 3.3V I/O power supply

240 GND GND − Ground 295 A8 ARDATA[10] I/O SDRAM-ATAPI, Bidirectional buffer

241 D15 AT2ADR[0] I/O ATAPI-HDD, Bidirectional buffer 296 B8 ARDATA[9] I/O SDRAM-ATAPI, Bidirectional buffer

242 VDD VDD − 1.2V LOGIC power supply 297 C8 ARWE O SDRAM-ATAPI, Output buffer

243 C15 AT2CS[1] O ATAPI-HDD, Output buffer 298 VDD VDD − 1.2V LOGIC power supply

244 GND GND − Ground 299 A7 ARDATA[8] I/O SDRAM-ATAPI, Bidirectional buffer

245 B15 AT2CS[0] O ATAPI-HDD, Output buffer 300 E9 ARDATA[5] I/O SDRAM-ATAPI, Bidirectional buffer

246 VDD VDD − 1.2V LOGIC power supply 301 D8 ARDQM[0] O SDRAM-ATAPI, Output buffer

247 A15 AT2MODE I ATAPI-HDD, Input buffer 302 GND GND − Ground

248 GND GND − Ground 303 B7 ARDQM[1] O SDRAM-ATAPI, Output buffer

249 GND GND − Ground 304 C7 ARCS[0] O SDRAM-ATAPI, Output buffer

250 A14 RESET I Input buffer (5V tolerant) 305 VDD3 VDD3 − 3.3V I/O power supply

251 VDD3 VDD3 − 3.3V I/O power supply 306 A6 ARCLKO O SDRAM-ATAPI, Output buffer

252 B14 VDD − 1.2V LOGIC power supply 307 GND GND − Ground

253 C14 DBI I TEST, Input buffer 308 B6 ARADRS[12] O SDRAM-ATAPI, Output buffer

254 GND GND − Ground 309 E8 ARDATA[7] I/O SDRAM-ATAPI, Bidirectional buffer

255 D14 TRACE I TEST, Input buffer 310 D7 ARRAS O SDRAM-ATAPI, Output buffer

256 E14 VDD − 1.2V LOGIC power supply 311 VDD3 VDD3 − 3.3V I/O power supply

257 A13 PCO O CLOCK, 3 state output buffer 312 A5 ARADRS[11] O SDRAM-ATAPI, Output buffer

258 GND GND − Ground 313 C6 ARADRS[13] O SDRAM-ATAPI, Output buffer

259 B13 PLL3AVSS − 314 B5 ARADRS[9] O SDRAM-ATAPI, Output buffer

260 C13 PLL3AVDD − 315 VDD VDD − 1.2V LOGIC power supply

261 D13 VMCLK I CLOCK, Input buffer 316 E7 ARCAS O SDRAM-ATAPI, Output buffer

262 E13 PLL1AVDD − 317 D6 ARADRS[14] O SDRAM-ATAPI, Output buffer

263 A12 PLL1AVSS − 318 C5 ARADRS[1] O SDRAM-ATAPI, Output buffer

264 VDD3 VDD3 − 3.3V I/O power supply 319 GND GND − Ground

265 B12 ADCCLKO O CLOCK, Output buffer 320 B4 ARADRS[3] O SDRAM-ATAPI, Output buffer

266 GND GND − Ground 321 A4 ARADRS[8] O SDRAM-ATAPI, Output buffer

267 C12 VDD − 1.2V LOGIC power supply 322 A3 ARADRS[7] O SDRAM-ATAPI, Output buffer


269 D12 DVAMCLKO O CLOCK, Output buffer 324 E6 ARCS[1] O SDRAM-ATAPI, Output buffer

270 GND GND − Ground 325 D5 ARADRS[0] O SDRAM-ATAPI, Output buffer

271 A11 DACCLKO O CLOCK, Output buffer 326 C4 ARADRS[2] O SDRAM-ATAPI, Output buffer

272 VDD3 VDD3 − 3.3V I/O power supply 327 VDD3 VDD3 − 3.3V I/O power supply

273 E12 DVAMCLKI I AUDIO CLOCK, Input buffer 328 A2 ARADRS[5] O SDRAM-ATAPI, Output buffer

274 GND GND − Ground 329 B3 ARADRS[6] O SDRAM-ATAPI, Output buffer

275 B11 AMCLK1 I CLOCK, Input buffer 330 B2 ARADRS[4] O SDRAM-ATAPI, Output buffer

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S130

1 2 3 4




332 E5 ARADRS[10] O SDRAM-ATAPI, Output buffer 387 GND GND − Ground

333 D4 SRCBCKI I AUDIO, Input buffer 388 L3 SPIDATAI I/O HOST, Bidirectional buffer


335 C3 SRCLRCKI I AUDIO, Input buffer 390 M5 SPIDATAO I/O HOST, Bidirectional buffer

336 B1 SRCDATAI I AUDIO, Input buffer 391 GND GND − Ground

337 A1 VDD − 1.2V LOGIC power supply 392 L2 SPICLK I/O HOST, Bidirectional buffer


339 C2 SRCBCKO O AUDIO, Output buffer 394 L1 DDATA[0] I/O SDRAM-DEC, Bidirectional buffer


341 D3 SRCLRCKO O AUDIO, Output buffer 396 M4 DDATA[14] I/O SDRAM-DEC, Bidirectional buffer

342 E4 SRCDATAO O AUDIO, Output buffer 397 M3 DDATA[15] I/O SDRAM-DEC, Bidirectional buffer

343 F5 SPDIFI I AUDIO, Input buffer 398 M2 DDATA[2] I/O SDRAM-DEC, Bidirectional buffer

344 D2 SPDIFO O AUDIO, Output buffer 399 VDD VDD − 1.2V LOGIC power supply

345 C1 DVLRCK I/O AUDIO, Bidirectional buffer 400 N5 DDATA[11] I/O SDRAM-DEC, Bidirectional buffer

346 E3 DVBCK I/O AUDIO, Bidirectional buffer 401 GND GND − Ground

347 D1 DVADATA I/O AUDIO, Bidirectional buffer 402 M1 DDATA[1] I/O SDRAM-DEC, Bidirectional buffer

348 F4 ACMOD[1] I AUDIO, Input buffer 403 GND GND − Ground

349 G5 ACMOD[0] I AUDIO, Input buffer 404 N4 DDATA[12] I/O SDRAM-DEC, Bidirectional buffer

350 E1 LRCKI I AUDIO, Input buffer 405 N3 DDATA[13] I/O SDRAM-DEC, Bidirectional buffer

351 E2 BCKI I AUDIO, Input buffer 406 N2 DDATA[3] I/O SDRAM-DEC, Bidirectional buffer

352 GND GND − Ground 407 VDD3 VDD3 − 3.3V I/O power supply

353 F3 ADATAI I AUDIO, Input buffer 408 N1 DDATA[4] I/O SDRAM-DEC, Bidirectional buffer

354 GND GND − Ground 409 P5 DDATA[8] I/O SDRAM-DEC, Bidirectional buffer

355 G4 LRCKO O AUDIO, Output buffer 410 P4 DDATA[9] I/O SDRAM-DEC, Bidirectional buffer

356 VDD VDD − 1.2V LOGIC power supply 411 VDD VDD − 1.2V LOGIC power supply

357 H5 BCKO O AUDIO, Output buffer 412 P3 DDATA[10] I/O SDRAM-DEC, Bidirectional buffer

358 F1 ADATAO O DVD-AUDIO, Output buffer 413 GND GND − Ground

359 F2 DVDADT[7] O DVD-AUDIO, Output buffer 414 P2 DDATA[6] I/O SDRAM-DEC, Bidirectional buffer

360 G2 DVDADT[6] O DVD-AUDIO, Output buffer 415 GND GND − Ground

361 G3 DVDADT[5] O DVD-AUDIO, Output buffer 416 P1 DDATA[5] I/O SDRAM-DEC, Bidirectional buffer

362 J5 DVDADT[4] O DVD-AUDIO, Output buffer 417 R1 DDATA[7] I/O SDRAM-DEC, Bidirectional buffer

363 H4 DVDADT[3] O DVD-AUDIO, Output buffer 418 R2 DDQM[0] O SDRAM-DEC, Output buffer

364 G1 DVDADT[2] O DVD-AUDIO, Output buffer 419 VDD3 VDD3 − 3.3V I/O power supply

365 H3 DVDADT[1] O DVD-AUDIO, Output buffer 420 R3 DWE O SDRAM-DEC, Output buffer

366 H2 DVDADT[0] O DVD-AUDIO, Output buffer 421 VDD VDD − 1.2V LOGIC power supply

367 H1 DVDAADR[1] O DVD-AUDIO, Output buffer 422 R4 DDQM[1] O SDRAM-DEC, Output buffer

368 K5 DVDAADR[0] O DVD-AUDIO, Output buffer 423 GND GND − Ground

369 J4 DVDAREQ I/O DVD-AUDIO, Bidirectional buffer 424 R5 DCLKO O SDRAM-DEC, Output buffer


371 J3 DVDAACK O DVD-AUDIO, Output buffer 426 VDD VDD − 1.2V LOGIC power supply

372 VDD VDD − 1.2V LOGIC power supply 427 T1 DCAS O SDRAM-DEC, Output buffer

373 J2 SCICS[1] I/O HOST, Bidirectional buffer 428 GND GND − Ground

374 VDD3 VDD3 − 3.3V I/O power supply 429 T2 DRAS − SDRAM-DEC, Output buffer

375 J1 SCICS[0] I/O HOST, Bidirectional buffer 430 GND GND − Ground

376 VDD VDD − 1.2V LOGIC power supply 431 T3 DCS O SDRAM-DEC, Output buffer

377 K4 SCIDATA[1] I/O HOST, Bidirectional buffer 432 T4 DADRS[11] O SDRAM-DEC, Output buffer

378 GND GND − Ground 433 U1 DBS[0] O SDRAM-DEC, Output buffer

379 L5 SCIDATA[0] I/O HOST, Bidirectional buffer 434 VDD3 VDD3 − 3.3V I/O power supply

380 K3 VDD − 1.2V LOGIC power supply 435 T5 DADRS[9] O SDRAM-DEC, Output buffer

381 K2 SCICLK[1] I/O HOST, Bidirectional buffer 436 U2 DBS[1] O SDRAM-DEC, Output buffer

382 GND GND − Ground 437 U3 DADRS[10] O SDRAM-DEC, Output buffer

383 K1 SCICLK[0] I/O HOST, Bidirectional buffer 438 VDD VDD − 1.2V LOGIC power supply

384 GND GND − Ground 439 U4 DADRS[7] O SDRAM-DEC, Output buffer

385 L4 SPICS I/O HOST, Bidirectional buffer 440 GND GND − Ground

1 2 3 4

C

D

F

A

B

E

131

5 6 7 8



441 V1 DADRS[0] O SDRAM-DEC, Output buffer 496 VDD VDD − 1.2V LOGIC power supply

442 GND GND − Ground 497 AD4 HDACK[0] O Output buffer, 4mA

443 V2 DADRS[1] O SDRAM-DEC, Output buffer 498 AF1 HDREQ[1] I HOST, Input buffer

444 VDD VDD − 1.2V LOGIC power supply 499 AE3 HDREQ[0] I HOST, Input buffer

445 U5 DADRS[8] O SDRAM-DEC, Output buffer 500 AC5 HWAIT I HOST, Input buffer

446 GND GND − Ground 501 AF2 HOE O HOST, Output buffer

447 V3 DADRS[5] O SDRAM-DEC, Output buffer 502 VDD3 VDD3 − 3.3V I/O power supply


449 V4 DADRS[6] O SDRAM-DEC, Output buffer 504 AE4 VDD − 1.2V LOGIC power supply

450 W1 DADRS[3] O SDRAM-DEC, Output buffer 505 AD5 HCS[5] O HOST, Output buffer

451 W2 DADRS[2] O SDRAM-DEC, Output buffer 506 AG2 HCS[4] O HOST, Output buffer

452 VDD VDD − 1.2V LOGIC power supply 507 AF3 HCS[3] O HOST, Output buffer

453 W3 DADRS[4] O SDRAM-DEC, Output buffer 508 AG3 HCS[2] O HOST, Output buffer

454 GND GND − Ground 509 AH2 HCS[1] O HOST, Output buffer


456 GND GND − Ground 511 AF4 HCS[0] O HOST, Output buffer

457 V5 INT[7] I/O HOST, Bidirectional buffer 512 VDD VDD − 1.2V LOGIC power supply

458 VDD VDD − 1.2V LOGIC power supply 513 AD6 HADRS[10] I/O HOST, Bidirectional buffer

459 W4 INT[6] I/O HOST, Bidirectional buffer 514 GND GND − Ground

460 Y1 INT[5] I/O HOST, Bidirectional buffer 515 AE5 HADRS[11] I/O HOST, Bidirectional buffer

461 Y2 INT[4] I/O HOST, Bidirectional buffer 516 AG4 HADRS[13] I/O HOST, Bidirectional buffer

462 VDD3 VDD3 − 3.3V I/O power supply 517 AH3 HADRS[30] I/O HOST, Bidirectional buffer

463 Y3 INT[3] I/O HOST, Bidirectional buffer 518 VDD3 VDD3 − 3.3V I/O power supply

464 GND GND − Ground 519 AF5 HADRS[12] I/O HOST, Bidirectional buffer

465 Y4 INT[2] I/O HOST, Bidirectional buffer 520 GND GND − Ground

466 VDD VDD − 1.2V LOGIC power supply 521 AH4 HADRS[14] I/O HOST, Bidirectional buffer

467 W5 INT[1] I/O HOST, Bidirectional buffer 522 AE6 HDATA[1] I/O HOST, Bidirectional buffer

468 AA1 INT[0] I/O HOST, Bidirectional buffer 523 AD7 HADRS[9] I/O HOST, Bidirectional buffer

469 AA2 SCLK[1] I/O HOST, Bidirectional buffer 524 VDD3 VDD3 − 3.3V I/O power supply

470 AA3 SCLK[0] I/O HOST, Bidirectional buffer 525 AG5 HDATA[15] I/O HOST, Bidirectional buffer

471 AB1 CTS[3] I/O HOST, Bidirectional buffer 526 GND GND − Ground

472 GND GND − Ground 527 AH5 HDATA[14] I/O HOST, Bidirectional buffer

473 Y5 CTS[2] I/O HOST, Bidirectional buffer 528 GND GND − Ground

474 GND GND − Ground 529 AF6 HDATA[0] I/O HOST, Bidirectional buffer

475 AA4 CTS[1] I/O HOST, Bidirectional buffer 530 AD8 HDATA[6] I/O HOST, Bidirectional buffer

476 VDD VDD − 1.2V LOGIC power supply 531 AE7 HDATA[2] I/O HOST, Bidirectional buffer

477 AB3 CTS[0] I/O HOST, Bidirectional buffer 532 VDD3 VDD3 − 3.3V I/O power supply

478 AB2 RTS[3] I/O HOST, Bidirectional buffer 533 AG6 HDATA[12] I/O HOST, Bidirectional buffer

479 AC2 RTS[2] I/O HOST, Bidirectional buffer 534 VDD VDD − 1.2V LOGIC power supply

480 AC1 RTS[1] I/O HOST, Bidirectional buffer 535 AH6 HDATA[13] I/O HOST, Bidirectional buffer

481 AA5 RTS[0] I/O HOST, Bidirectional buffer 536 AG7 HDATA[11] I/O HOST, Bidirectional buffer

482 VDD3 VDD3 − 3.3V I/O power supply 537 AF7 HDATA[3] I/O HOST, Bidirectional buffer

483 AB4 RX[3] I/O HOST, Bidirectional buffer 538 GND GND − Ground

484 GND GND − Ground 539 AE8 HDATA[5] I/O HOST, Bidirectional buffer

485 AC3 RX[2] I/O HOST, Bidirectional buffer 540 GND GND − Ground

486 VDD VDD − 1.2V LOGIC power supply 541 AD9 HDATA[7] I/O HOST, Bidirectional buffer

487 AD2 RX[1] I/O HOST, Bidirectional buffer 542 AF8 HDATA[4] I/O HOST, Bidirectional buffer

488 AD1 RX[0] I/O HOST, Bidirectional buffer 543 AH7 HDATA[10] I/O HOST, Bidirectional buffer

489 AB5 TX[3] I/O HOST, Bidirectional buffer 544 VDD3 VDD3 − 3.3V I/O power supply

490 AC4 TX[2] I/O HOST, Bidirectional buffer 545 AG8 HDATA[8] I/O HOST, Bidirectional buffer

491 AD3 TX[1] I/O HOST, Bidirectional buffer 546 VDD VDD − 1.2V LOGIC power supply

492 GND GND − Ground 547 AH8 HDATA[9] I/O HOST, Bidirectional buffer

493 AE1 TX[0] I/O HOST, Bidirectional buffer 548 AE9 HDWE O HOST, Output buffer

494 GND GND − Ground 549 AF9 DQMWS[0] O HOST, Output buffer

495 AE2 HDACK[1] O HOST, Output buffer 550 GND GND − Ground

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S132

1 2 3 4



551 AD10 HDCS[1] O HOST, Output buffer 606 AG16 TMS I TEST, nput buffer


553 AG9 DQMWS[1] O HOST, Output buffer 608 AF16 TDO O TEST, Output buffer


555 AH9 HCLKO O HOST, Output buffer 610 AE16 TDI I TEST, Input buffer


557 AE10 HDCS[0] O HOST, Output buffer 612 AH17 TRST I TEST, Input buffer


559 AD11 HADRS[15] I/O HOST, Bidirectional buffer 614 AD16 TCK I TEST, Input buffer


561 AF10 HCAS O HOST, Output buffer 616 AG17 PLLRST I CLOCK, Input buffer

562 AG10 HRAS O HOST, Output buffer 617 GND GND − Ground

563 AH10 HCLKEN O HOST, Output buffer 618 AF17 DVVCLKO O CLOCK, Output buffer

564 GND GND − Groud 619 VDD3 VDD3 − 3.3V I/O power supply

565 AE11 HADRS[16] I/O HOST, Bidirectional buffer 620 AE17 PXCLK O CLOCK, Output buffer


567 AF11 HADRS[17] I/O HOST, Bidirectional buffer 622 AH18 REC656I[7] I VIDEO-Digital, Input buffer

568 AD12 HADRS[27] I/O HOST, Bidirectional buffer 623 VDD VDD − 1.2V LOGIC power supply

569 AG11 HADRS[20] I/O HOST, Bidirectional buffer 624 AG18 REC656I[6] I VIDEO-Digital, Input buffer


571 AH11 HADRS[21] I/O HOST, Bidirectional buffer 626 AD17 REC656I[5] I VIDEO-Digital, Input buffer

572 VDD VDD − 1.2V LOGIC power supply 627 AF18 REC656I[4] I VIDEO-Digital, Input buffer

573 AE12 HADRS[19] I/O HOST, Bidirectional buffer 628 AE18 REC656I[3] I VIDEO-Digital, Input buffer

574 AF12 HADRS[18] I/O HOST, Bidirectional buffer 629 AH19 REC656I[2] I VIDEO-Digital, Input buffer

575 AG12 HADRS[23] I/O HOST, Bidirectional buffer 630 AG19 REC656I[1] I VIDEO-Digital, Input buffer

576 GND GND − Ground 631 AF19 REC656I[0] I VIDEO-Digital, Input buffer

577 AD13 HADRS[28] I/O HOST, Bidirectional buffer 632 AH20 DVVIDEO[7] I/O VIDEO-Digital, Bidirectional buffer

578 VDD VDD − 1.2V LOGIC power supply 633 AD18 DVVIDEO[6] I/O VIDEO-Digital, Bidirectional buffer

579 AH12 HADRS[22] I/O HOST, Bidirectional buffer 634 AE19 DVVIDEO[5] I/O VIDEO-Digital, Bidirectional buffer


581 AE13 HADRS[29] I/O HOST, Bidirectional buffer 636 AG20 DVVCLKI I CLOCK, Input buffer

582 VDD VDD − 1.2V LOGIC power supply 637 AF20 PLL2AVDD −583 AF13 HADRS[24] I/O HOST, Bidirectional buffer 638 AH21 PLL2AVSS −584 VDD3 VDD3 − 3.3V I/O power supply 639 AD19 R656CLKI I CLOCK, Input buffer

585 AG13 HADRS[25] I/O HOST, Bidirectional buffer 640 GND GND − Ground

586 GND GND − Ground 641 AE20 ADMCLKI I CLOCKl, Input buffer

587 AH13 HADRS[26] I/O HOST, Bidirectional buffer 642 VDD3 VDD3 − 3.3V I/O power supply

588 GND GND − Ground 643 AG21 DVVIDEO[4] I/O VIDEO-Digital, Bidirectional buffer

589 GND GND − Ground 644 AF21 DVVIDEO[3] I/O VIDEO-Digital, Bidirectional buffer

590 AD14 TESTMOD[6] I TEST, Input buffer 645 AD20 DVVIDEO[2] I/O VIDEO-Digital, Bidirectional buffer

591 AE14 VDD − 1.2V LOGIC power supply 646 AH22 DVVIDEO[1] I/O VIDEO-Digital, Bidirectional buffer

592 AF14 TESTMOD[5] I TEST, Input buffer 647 AG22 DVVIDEO[0] I/O VIDEO-Digital, Bidirectional buffer

593 GND GND − Ground 648 AE21 REC656O[7] O VIDEO-Digital, Output buffer

594 AG14 TESTMOD[4] I TEST, Input buffer 649 AF22 REC656O[6] O VIDEO-Digital, Output buffer

595 VDD VDD − 1.2V LOGIC power supply 650 VDD VDD − 1.2V LOGIC power supply

596 AH14 TESTMOD[3] I TEST, Input buffer 651 AH23 DVREQ I VIDEO-Digital, Input buffer


598 AH15 TESTMOD[2] I TEST, Input buffer 653 AG23 DVACK O VIDEO-Digital, Output buffer

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

599 VDD VDD − 1.2V LOGIC power supply 654 GND GND − Ground

600 AG15 TESTMOD[1] I TEST, Input buffer 655 AE22 AVSS1DA10 −601 GND GND − Ground 656 AD21 GOUT O

602 AF15 TESTMOD[0] I TEST, Input buffer 657 AH24 AVDD1DA10 −603 AE15 CSYNC I CLOCK, Input buffer 658 AF23 BOUT O

604 AD15 VIPWM O CLOCK, Output buffer 659 AE23 AVDD1DA10 −605 AH16 PLLON I TEST, Input buffer 660 AG24 ROUT O

1 2 3 4

C

D

F

A

B

E

133

5 6 7 8



661 AD22 IREF[0] − 669 AD23 REC656O[4] O VIDEO-Digital, Output buffer

662 AF24 IREF[1] − 670 AH27 REC656O[3] O VIDEO-Digital, Output buffer

663 AG25 YOUT O 671 AG26 REC656O[2] O VIDEO-Digital, Output buffer

664 AH25 AVSS2DA10 − 672 AG27 REC656O[1] O VIDEO-Digital, Output buffer

665 AE24 COUT O 673 GND GND − Ground

666 AH26 AVDD2DA10 − 674 AD24 REC656O[0] O VIDEO-Digital, Output buffer

VIDEO-Analog667 GND GND − Ground 675 AE25 AGCCTL O

668 AF25 REC656O[5] O VIDEO-Digital, Output buffer

BALLAddress Pin Name BALL

Address Pin Name BALLAddress Pin Name BALL

Address Pin Name

AA23 GND P12 GND AC11 VDD AB23 VDD3

AA6 GND P13 GND AC14 VDD AB6 VDD3

AC12 GND P14 GND AC6 VDD AC10 VDD3


AC20 GND P16 GND L6 VDD AC16 VDD3


F11 GND R12 GND AC14 VDD AC22 VDD3

F14 GND R13 GND AC6 VDD AC7 VDD3

F17 GND R14 GND AC8 VDD F10 VDD3

F20 GND R15 GND L6 VDD F13 VDD3

F23 GND R16 GND P6 VDD F16 VDD3

F8 GND R17 GND U6 VDD F19 VDD3

H6 GND R23 GND Y6 VDD F22 VDD3

J23 GND R6 GND F12 VDD F7 VDD3

M12 GND T12 GND F6 VDD G23 VDD3

M13 GND T13 GND F9 VDD G6 VDD3

M14 GND T14 GND J6 VDD K23 VDD3

M15 GND T15 GND AC15 VDD K6 VDD3

M16 GND T16 GND AC18 VDD N23 VDD3

M17 GND T17 GND AC21 VDD N6 VDD3

M23 GND U12 GND AC23 VDD T23 VDD3

M6 GND U13 GND F15 VDD T6 VDD3

N12 GND U14 GND F18 VDD W23 VDD3

N13 GND U15 GND F21 VDD W6 VDD3

N14 GND U16 GND H23 VDD

N15 GND U17 GND L23 VDD

N16 GND V23 GND P23 VDD

N17 GND V6 GND U23 VDD

Y23 VDD

Others

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

VIDEO-Analog

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S134

1 2 3 4

UPD72852AGB-8EU (MAIN ASSY : IC5101)• IEEE1394 Physical IC

Pin Arrangement

DGND 1

SCLK 2

IC (DL) 3

DVDD 4

CTL0 5

CTL1 6

DGND 7

D0 8

D1 9

DVDD 10

D2 11

D3 12

DGND 13

D4 14

D5 15

DGND 16

D6

17

D7

18

SU

S/R

ES

19

DV

DD

20

DG

ND

21

XO

22

XI

23

AG

ND

24

AV

DD

25

PC

026

PC

127

PC

228

IC (

AL)

29

CM

C30

AV

DD

31

CP

S32

48 TpBias1

47 AVDD

46 TpA1p

45 TpA1n

44 TpB1p

43 TpB1n

42 AGND

41 TpBias0

40 AVDD

39 TpA0p

38 TpA0n

37 TpB0p

36 TpB0n

35 AGND

34 RI1

33 AGND

64D

GN

D

63LR

EQ

62F

NS

el

61S

PD

/BD

B

60D

VD

D

59LP

S

58LK

ON

57D

GN

D

56D

VD

D

55R

ES

ET

B

54A

VD

D

53A

GN

D

52A

GN

D

51IC

(A

L)

50D

IRE

CT

49A

GN

DBlock Diagram

30 39

38

CMC TpA0p

TpA0n26PC0

27PC1

28PC2

19SUS/RES

63LREQ

59LPS

50DIRECT

2SCLK

58

32

LKON

LinkInterface

I/O

5CTL0

6CTL1

8D0

9D1

11D2

12D3

14D4

15D5

17D6

18D7

CPS

55RESETB

Arbitrationand

Control StateMachine

Logic

CablePort 0

Receive DataDecoder

andRetimer

Voltageand

CurrentGenerator

Crystal OscillatorPLL System

andTransmit Clock

Generator

Transmit DataEncoder

CablePowerStatus

37

36

TpB0p

TpB0n

46

45

TpA1p

TpA1n

CablePort 1

44

43

TpB1p

TpB1n

41 TpBias0

48 TpBias1

34 RI1

23 XI

22 XO

1 2 3 4

C

D

F

A

B

E

135

5 6 7 8

Pin Function

• Cable Interface Pins

• Link Interface Pins


39 TpA0p I/O Port 0 twisted pair cable A positive phase I/O

38 TpA0n I/O Port 0 twisted pair cable A negative phase I/O

37 TpB0p I/O Port 0 twisted pair cable B positive phase I/O

36 TpB0n I/O Port 0 twisted pair cable B negative phase I/O

46 TpA1p I/O Port 1 twisted pair cable A positive phase I/O

45 TpA1n I/O Port 1 twisted pair cable A negative phase I/O

44 TpB1p I/O Port 1 twisted pair cable B positive phase I/O

43 TpB1n I/O Port 1 twisted pair cable B negative phase I/O

19 SUS/RES ISuspend/Resume function select1 : Suspend/Resume on (IEEE1394a-2000 compliant)0 : Suspend/Resume off (P1394a draft 1.3 compliant)

32 CPS I

Cable power statusConnect to the cable through a 390 kΩ resistor and to the GND through a 100 kΩ resistor.0 : Cable power fail1 : Cable power on


8 D0 I/O Data input/output (bit 0)








5 CTL0 I/O Link interface control (bit 0)

6 CTL1 I/O Link interface control (bit 1)

63 LREQ I Link request input

2 SCLK OLink control output clockLPS 1 : 49.152 MHz outputLPS 0 : Clamp to 0 (The clock signal will be output within 25 µsec after change to "0")

59 LPS ILink power status input0 : Link power off1 : Link power on (PHY/Link direct connection)

58 LKON OLink-on signal outputLink-on signal is 6.1444 MHz clock output.

50 DIRECT IPHY/Link isolation barrier control input0 : Isolation barrier1 : PHY/Link direct connection

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S136

1 2 3 4

• Control Pins

• IC


26 PC0 IPower class set inputThis pin status will be loaded to Pwr_class bit which allocated to PHY register 4H.IEEE1394a-2000 chapter [4.3.4.1]

27 PC1 I

28 PC2 I

30 CMC I

Configuration manager capable settingThis pin status will be loaded to Contender bit which allocated to PHY register 4H.0 : Non contender1 : Contender

55 RESETB I

Power on reset inputConnect to GND through a 0.1 µF capacitor.0 : Reset1 : Normal

61 SPD/BDB

IFNSel = 0

Speed select (UPD72852GB)0 : MAX. S2001 : MAX. S400

OFNSel = 1

BIAS Detected output (Logical Inverse)0 : BIAS is coming from some port.1 : BIAS is not coming from any port.


29, 51 IC (AL) − Internally Connected (Low Clamped)Connected to GND.

3 IC (DL) − Internally Connected (Low Clamped)Connected to GND.

• Power Supply PinsNo. Pin Name I/O Function

25, 31, 40, 47, 54 AVDD − Analog power

24, 33, 35, 42, 49, 52, 53 AGND − Analog GND

4, 10, 20, 56, 60 DVDD − Digital VDD

1, 7, 13, 16, 21, 57, 64 DGND − Digital GND

• Other PinsNo. Pin Name I/O Function

41 TpBias0 O Port 0 twisted pair output

48 TpBias1 O Port 1 twisted pair output

34 RI1 − Resistor connection pin 1 for reference current generatorPlease connect to GND pin through the 9.1 kΩ resistor.

23 XI − Crystal oscillator connection XI

22 XO − Crystal oscillator connection XO

62 FNSel IFunction Select0 : #61 acts as SPD (UPD72852GB compliant)1 : #61 acts as BDB

1 2 3 4

C

D

F

A

B

E

137

5 6 7 8

UPD72893BGD-LML (MAIN ASSY : IC5202)• IEEE1394 Link IC

Pin Arrangement

RESETB 1PHY_D7 2PHY_D6 3PHY_D5 43.3VDD 5

PHY_D4 6PHY_D3 7PHY_D2 83.3GND 9

PHY_D1 10PHY_D0 11

CTL1 12CTL0 13

2.5VDD 14SCLK 15LREQ 16

LPS 17LINKON 18

STREAM10 19STREAM11 20STREAM12 21STREAM13 22STREAM14 23STREAM15 24STREAM16 25STREAM17 26

PACKETEN1 27TSERROR1 28

TSRW1 29SYNC1 303.3VDD 31

TSSUB1 32PACKETEN2/VSYNC 33TSERROR2/HSYNC 34

3.3GND 35TSRW2/FLD 36

SYNC2 37TSSUB2 382.5GND 39

STREAM20/VD0 40STREAM21/VD1 41STREAM22/VD2 42STREAM23/VD3 43STREAM24/VD4 44STREAM25/VD5 45STREAM26/VD6 46STREAM27/VD7 47

AFS1 48AFS2 49

VCLKI 50VCLKO 513.3VDD 52

VP

WM

53M

D0

54M

D1

553.

3GN

D56

MD

257

MD

358

MD

459

MD

560

MD

661

MD

762

3.3V

DD

63M

D8

64M

D9

65M

D10

662.

5VD

D67

3.3G

ND

68M

D11

69M

D12

70M

D13

71M

D14

72M

D15

73M

WE

74M

CA

S75

MR

AS

76M

CLK

773.

3VD

D78

MA

079

MA

180

MA

281

3.3G

ND

82M

A3

83M

A4

84M

A5

85M

A6

86M

A7

87M

A8

88M

A9

89M

A10

902.

5GN

D91

MA

1192

ALR

CK

93A

BC

K94

3.3V

DD

95P

CM

196

PC

M2

97A

EM

P1

983.

3GN

D99

IC (

O)

100

AM

CLK

O10

1A

PW

M10

2A

MC

LK44

103

AM

CLK

4810

4

A1156BR_MON155IC (PL)154DV_INT153IC (PL)152SCS151RXD150TXD1493.3GND148SCK147SI146SO1452.5GND144P_D15143P_D14142P_D131413.3VDD140P_D12139P_D11138P_D10137P_D9136P_D8135P_D7134P_D6133P_D51323.3GND131P_D4130P_D3129P_D21283.3VDD127P_D1126P_D0125INT124IOCHRDY123IC (O)122IC (H)121IOR120RWZ1192.5VDD118CS117AD10116AD9115AD8114AD7113AD6112AD5111AD4110AD3109AD2108AD1107PSSEL1106PSSEL0105

IFIR

OM

E20

8IC

(L)

207

IC (

L)20

6IC

(L)

205

IC (

PL)

204

IC (

L)20

3H

S_C

LK20

2P

LLD

GN

D20

1P

LLA

GN

D20

0P

LLA

VD

D19

9P

LLD

VD

D19

8IC

(L)

197

D15

196

2.5G

ND

195

D14

194

D13

193

D12

192

D11

191

D10

190

D9

189

3.3G

ND

188

3.3V

DD

187

D8

186

D7

185

D6

184

D5

183

D4

182

D3

181

D2

180

D1

179

D0

178

WR

Z17

7R

DZ

176

A17

175

A16

174

3.3G

ND

173

A15

172

A14

171

2.5V

DD

170

A13

169

A12

168

A11

167

3.3V

DD

166

A10

165

A9

164

A8

163

A7

162

A6

161

A5

160

A4

159

A3

158

A2

157

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S138

1 2 3 4

Block Diagram

149

1

76

TXD

150RXD

HostInterface<UART>

RESETB

202HS_CLK

208IFIROME

PH

Y_D

[7 :

0]

CT

L [1

: 0]

15S

CLK

16LR

EQ

17LP

S

18LI

NK

ON

ST

RE

AM

[7 :

0]

TS

RW

PAC

KE

TE

N

SY

NC

TS

SU

B

VD

[7 :

0]

VS

YN

C

HS

YN

C

FLD

117CS

119RWZ

120IOR

123IOCHRDY

AD [10 : 1] 116-107

106, 105

47-40

12, 1

3

143-141, 139-132,130-128, 126, 125

2-4,

6-8

,10

, 11

P_D [15 : 0]

175, 174, 172, 171,169-167, 165-156

196, 194-189,186-178

A [17 : 0]

D [15 : 0]

92, 90-83,81-79 MA [11 : 0]

73-69, 66-64,62-57, 55, 54 MD [15 : 0]

RDZ

124INT

PSSEL [1 : 0]

SystemControl

TestBlock

HostInteface

IEEE1394 Link Core

DV Codec Core

Ext

erna

lF

lash

RO

MIn

terf

ace

SD

RA

MIn

terf

ace

Aud

ioIn

terf

ace

Par

alle

l Int

erfa

ce

StreamInterface

16-bit TimerUnit D

<TMD>CPU Core

High-speedInternal ROM

192 kbytes

151SCS

147SCK

145SO

146176

WRZ177

104

103

102

101

SI

MRAS

EEPROMInterface<CSI>

High-speedInternal ROM

60 kbytes

MemoryController

INTC

77 MCLK

75 MCAS

74 MWE

AMCLK44

AMCLK48

APWM

AMCLKO

97 PCM2

96 PCM1

98 AEMP1

93 ALRCK

94 ABCK

36 TSRW2 / FLD

33 PACKETEN2 / VSYNC

37 SYNC2

34 TSERROR2 / HSYNC

38 TSSUB2

29 TSRW1

27 PACKETEN1

30 SYNC1

28 TSERROR1

32 TSSUB1

50 VCLKI

51 VCLKO

STREAM2 [7 : 0] / VD [7 : 0]

26-19 STREAM1 [7 : 0]

53 VPWM

Selector

Selector

1 2 3 4

C

D

F

A

B

E

139

5 6 7 8

(1) Link relationNo. Pin Name I/O Function Active

18 LINKON ILink-on signal inputClock inputWhen LPS is active, input 0.

−

17 LPS OLink power status outputLink power OFF : 0Link power ON : 2.7 MHz pulse output (20 dividing of host clock 54 MHz)

−

16 LREQ O Link request output −

15 SCLK IClock input for Link controlLPS is active : 49.152 MHz inputLPS = 0 0 : fixed

−

12, 13 CTL [1 : 0] I/O PHY/Link control signal input/output −2-4, 6-8, 10,11 PHY_D [7 : 0] I/O Data input/output between PHY-Link −

26-19 STREAM1 [7 : 0] I/O ISO data bus of stream interface 1 −27 PACKETEN1 I/O Packet enable signal input/output of stream interface 1 H/L

28 TSERROR1 I/O Packet error signal input/output of stream interface 1 H/L

29 TSRW1 I/O Data read/write enable signal input/output of stream interface 1 −30 SYNC1 I/O Frame synchronous signal input/output of stream interface 1 H/L

32 TSSUB1 I/O Not used Connect to VDD or GND through a resistor. H/L

47-40 STREAM2 [7 : 0] I/O ISO data bus of stream interface 2 −33 PACKETEN2 I/O Packet enable signal input/output of stream interface 2 H/L

34 TSERROR2 I/O Packet error signal input/output of stream interface 2 H/L

36 TSRW2 I/O Data read/write enable signal input/output of stream interface 2 −37 SYNC2 I/O Frame synchronous signal input/output of stream interface 2 H/L

38 TSSUB2 O Not used Set to open. −

(2) Video interface pinsNo. Pin Name I/O Function Active

50 VCLKI I Video clock input (27 MHz) −51 VCLKO O Video clock output (27 MHz) −

47-40 VD [7 : 0] I/O Video data signal −33 VSYNC I/O Video vertical sync. signal L

34 HSYNC I/O Video horizontal sync. signal L

36 FLD I/O Field index signal −53 VPWM O PWM signal for video PLL −

Pin Function

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S140

1 2 3 4

(3) Audio interface pinsNo. Pin Name I/O Function Active

104 AMCLK48 I Audio master clock input for sampling frequency 48 kHz −103 AMCLK44 I Audio master clock input for sampling frequency 44 kHz −101 AMCLKO O Audio master clock output −

96 PCM1 I/O

Audio PCM serial dataAt 2ch : System 1 (data of audio block 1)At 4ch : System 1The above is default setting value. Input/output data of PCM 1 and PCM 2 is replaced by Channel swap setting of an AUDIO_FUNC register.

−

97 PCM2 I/O

Audio PCM serial dataAt 2ch : MuteAt 4ch : System 2 (data of audio block 2)The above is default setting value. Input/output data of PCM 1 and PCM 2 is replaced by Channel swap setting of an AUDIO_FUNC register.Note: Cannot use it in DV decode.

−

98 AEMP1 O PCM1 emphasis ON/OFF in PCM 1 output H

93 ALRCK I/OAudio LR clockL ch : HighR ch : Low

−

94 ABCK I/O Audio bit clock −

49, 48 AFS [2 : 1] O

Audio sampling frequencyAFS2 AFS1

44.1 kHz 0 148 kHz 0 032 kHz 1 0

−

102 APWM O PWM signal for audio PLL −

(4) SDRAM interface pinsNo. Pin Name I/O Function Active

77 MCLK O CLK pin connection of SDRAM −76 MRAS O RAS pin connection of SDRAM −75 MCAS O CAS pin connection of SDRAM −74 MWE O WE pin connection of SDRAM −

92, 90-83,81-79

MA [ 11 : 0] O Address pin connection of SDRAM −

73-69, 66-64,62-57, 55, 54

MD [ 15 : 0] I/OData pin connection of SDRAMNote: Process of pull-up or pull down is necessary. So connect it to SDRAM directly.

−

1 2 3 4

C

D

F

A

B

E

141

5 6 7 8

(a) Parallel interface pins

(5) Host interface pins

No. Pin Name I/O Function Active

117 CS I Chip select input of parallel interface L

119 RWZ IRead and write control input of parallel interfaceISA type bus, SH-1 bus: Write strobe68000 bus : Read/write selection signal

L

120 IOR IIO read control input of parallel interfaceISA type bus, SH-1 bus : Read strobe68000 bus : Data strobe (DS)

L

123 IOCHRDY O Ready output of parallel interface L

116-107 AD [ 10 : 1] I Address input of parallel interface −143-141, 139-132,130-128, 126, 125 P_D [15 : 0] I/O Data input/output of parallel interface −

(b) Serial interface pins


149 TXD I/O Serial transmission data output of unsynchronous serial interface (UART) −150 RXD I/O Serial transmission data input of unsynchronous serial interface (UART) −

(c) Others


124 INT O Interrupt output to the outside H

106, 105 PSSEL [1 : 0] I

Parallel/serial interface selectionInput signal to select the outside interface which of parallel interface or serial interface.

PSSEL [1 : 0] Select00 Serial interface (UART)01 Parallel interface (ISA type bus)10 Parallel interface (68000 bus)11 Parallel interface (SH-1 bus)

−

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S142

1 2 3 4

(a) Flash ROM interface pins

(6) External ROM connection pins


196, 194-189,186-178

D [15 : 0] I/OExternal ROM data busData bus in the external ROM access.Process of pull-up or pull down is necessary.

−

175, 174, 172,171, 169-167,

165-156A [17 : 1] O

External ROM address busAddress bus in the external ROM access.Can addressing the 256k byte space.

−

176 RDZ OROM readStrobe signal which shows a read cycle for external ROM.It becomes the inactive in the idle state.

L

177 WRZ OROM writeStrobe signal which shows a write cycle for external ROM.

L

(b) EEPROM interface pins


145 SO I/O Serial transmit data output of clock-synchronous system serial interface (CSI) −146 SI I/O Serial receive data input of clock-synchronous system serial interface (CSI) −147 SCK I/O Clock output of clock-synchronous system serial interface (CSI) −151 SCS I/O Chip select output of clock-synchronous system serial interface (CSI) −

(7) Clock and reset pins


1 RESETB I

ResetRESETB input is asynchronous input. When a signal of fixed low-level width is input without relation to an operation clock, take precedence of all operation, and reset the system. Note: RESETB is low-active.

L

202 HS_CLK I

Host clockClock input pin which is supplied to CPU core and built-in peripheral I/O.Please input 27 MHz clock. Perform 2 multiply with internal PLL by 27 MHz clock, 54 MHz clock is supplied to CPU core and internal peripheral I/O.

−

1 2 3 4

C

D

F

A

B

E

143

5 6 7 8

(8) Power supply and ground pins


5, 31, 52, 63,78, 95, 127,

140, 166, 1873.3VDD −

3.3V power supply3.3V positive power supply pins. Power supply for 3.3V interface I/O.

−

14, 67,118, 170

2.5VDD −2.5V power supply2.5V positive power supply pins. Power supply for internal each block.

−

39, 91,144, 195

2.5GND

−Ground pinsConnect all GND pins to the common ground.

−

9, 35, 56, 68,82, 99, 131,

148, 173, 1883.3GND −

199 PLLAVDD −Analog power supply for multiply circuitAnalog positive power supply pin for PLL. Supply 2.5V.

−

200 PLLAGND −Analog ground for multiply circuitAnalog ground for PLL

−

198 PLLDVDD −Digital power supply for multiply circuitDigital positive power supply pin for PLL. Supply 2.5V.

−

201 PLLDGND −Digital ground for multiply circuitDigital ground for PLL

−

121 IC (H) −Internally connected pin Connect to VDD directly.

−

197, 203,205-207

IC (L) −Internally connected pin Connect to ground directly.

−

152, 154, 204 IC (PL) −Internally connected pin Connect to ground through a resistor.

−

100, 122 IC (O) −Internally connected pin Set to open.

−

(9) Others


153 DV_INT I/O Interrupt pin to the outside for the DV status read out. H

155 BR_MON I/OShows the bus reset occurred. There is some delay after real bus reset occurred because of set by the built-in firmware.

H

208 IFIROME IROM operation selection inputSet to 1 normally.

−

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S144

1 2 3 4

7.3 OUTLINE OF THE PRODUCT

Main newly developed technologies

1. PickupThe pickup supports quadruple-speed recording for the DVD-R/RW. A liquid-crystal tilt servo system is adopted for the pickup.

2. Recording-signal-processing LSI• UPD3330GC (DRIVE Assy: IC101)The recording-signal-processing module of conventional models consists of two chips, but this has been integrated into a single newly developed recording-signal-processing LSI, enabling stable performance and cost reduction.

3. AV-signal-processing LSI• M65673WG (MAIN Assy: IC1001)The AV-signal-processing module of conventional models consists of eleven chips, but this has been integrated into a single newly developed AV-signal-processing LSI, enabling large-scale cost reduction while maintaining the conventional functions. In the new LSI, all the basic functions necessary for a DVD recorder have been integrated. Like conventional models, this model is designed to support multitasking. The main functions are as follows:• 3-D Y/C separation• Video decoding• Frame TBC• MPEG video encoding• Dolby Digital Consumer Encoding• ATA/ATAPI I/F (2 ch)• Main CPU (32-bit RISC, 54 MHz)• Graphics engine (OSD, scaling, mixing)• MPEG video decoding• Audio decoding (AC-3, MPEG)• Video encoding• Progressive conversion• Audio I/F• 3-D DNR for playback

4. DV-signal-processing LSIThe DV-signal-processing LSI consists of the following two chips:• UPD72852AGB-8EU (MAIN Assy: IC5101)A 400-Mbps two-port PHY LSI in compliance with the IEEE1394a-2000 standards

• UPD72893BGD-LML (MAIN Assy: IC5202)An EEE1394 link controller LSI having DV (digital video) encoding/decoding functions. Encoding/decoding of digital video signals in compliance with the SD specifications (NTSC/PAL) of the DV standard is supported. The 32-bit RISC CPU is built in for controlling the IEEE1394 bus and sending/receiving AV/C commands.

Fig.1 MAIN Assy

IC1001(SIDE B)

IC5202(Side A)

IC5101(Side A)

SIDE BMAIN ASSYC

1 2 3 4

C

D

F

A

B

E

145

5 6 7 8

System configurationIn each signal-processing LSI of the main function blocks, various processes have been integrated into one chip, which enables simpler system configuration. With the AV-signal-processing LSI at the center, video inputs/outputs, audio inputs/outputs, DV inputs/outputs, writer and various memory cells are connected to it.

Fig2. System configuration

1394 (DV)

CVBS/YC/YCbCr

Analog Audio

DIF

Playback

Record

Tuner / LineSelect

IC202Tuner / FL

ControlCPUIC1001

AV SignalProcessing

LSIDrive Assy(DVD-R/RW)

IC51011394 Phy

IC1102Flash

IC1101, IC1201, IC1301IC1401 SDRAM

IC52021394 Link / DV Codec

FL

IC1103SRAM

Video : IC701 LA73033Audio : IC601 LC75342M

IC3101Audio A/DAK5357VT

IC3201Audio D/A

PCM1742KE

UPD72893BGD-LML UPD72852AGB-8EU

[Memorized Data]• EEPROM (IC204 JCKB ASSY) The information about Tuner is backed up. (Pre-set CH, AFT ON/OFF, Skip CH, etc) Information about timed recording Other information (The state of Volume, remote control mode and last positions (Line/Tuner, etc)

• CPU SDRAM (IC1101 MAIN ASSY) The execution area and working area of a program

• FLASH ROM (IC1102 MAIN ASSY) The storing area of a program code and setting information

• SRAM (IC1103 MAIN ASSY) The working area for record and the storing area of setting information (backup RAM)

• DEC SDRAM (IC1201 MAIN ASSY) The working area of MPEG playback and OSD/Thumbnail (OSD is mainly for Disc Menu creation in Video mode)

• ENC SDRAM (IC1301 MAIN ASSY) The working area of MPEG recording and analog input and output (AVIO)

• ATA SDRAM (IC1401 MAIN ASSY) The working area of ATA/OSD2/Audio TBC (OSD2 is for all GUI.)

• ATA SDRAM (IC1421 MAIN ASSY) This is only for HDD model. The working area about HDD operation.

• DV SDRAM (IC5204 MAIN ASSY) The working area of Link and DV Codec

IC3301SRC

Playback

RecordHDD

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S146

1 2 3 4

New functions and specificationsIn this model, the following new functions and specifications have been included in addition to those of conventional models:

1. Improved multitasking functionsAs both the HDD and DVD drive are mounted in this model, like conventional models, the unit is designed to support various multitasking. Furthermore, this model supports DVD multitasking (only in VR mode), which was impossible with conventional models.

a Pursuit playbackPlayback of the title being recorded by the DVD drive in VR mode or the HDD is supported.

b Simultaneous recording/playback 1Playback of a title other than that being recorded by the DVD drive in VR mode or the HDD is also supported.

c Simultaneous recording/playback 2DVD playback during HDD recording is supported.

d Simultaneous recording/playback 3HDD playback during DVD recording is supported.

e Recording during high-speed dubbingHDD recording during high-speed dubbing from the HDD to a DVD is supported.

f Playback during high-speed dubbingPlayback of an HDD title during high-speed dubbing from the HDD to a DVD is supported.

2. Improved dubbing functionsHigh-speed dubbing and normal-speed dubbing are supported, as with conventional models. A one-touch dubbing function that enables automatic selection between these dubbing functions is also provided. In this model, high-speed dubbing from a DVD (in VR mode) to the HDD is also an added capability.

3. Disc backupThe function of creating a backup disc for a disc recorded in Video mode is added. The data of the original DVD are transferred to the HDD, then retransferred to the DVD drive, and because no reencoding is required during data transmission between the drives, a backup disc with no degradation of video and audio signals can be created.

4. Advanced disc NAVIIn the conventional disc NAVI function, recorded titles are displayed with still pictures as a list. In the advanced disc NAVI function, the title selected with the cursor is displayed as an animated picture with sound.

5. Improved Still Picture menu in Video modeThe disc NAVI function, which enables displaying a list of recorded titles with still pictures, is enabled in Video mode with this model. Selection from among nine title menus is also supported.

6. Adoption of MPEG2 SIFIn MN1-6 modes, MPEG2 SIF has been adopted, instead of the MPEG1 SIF of conventional models. This enables higher-quality recording for longer hours.

7. Improved editing functionsFor DVD, the original/play-list editing in DVD-VR mode available with conventional models is provided.For HDD editing, play-list-editing functions almost the same as for the DVD-VR, such as title combination, separation, and partial erasure, are enabled for the HDD with this model. With conventional models, these edit functions are available only for the dubbing list. The automatic-chapter-mark-insertion function in response to a change in audio type (stereo, monaural, bilingual) makes commercial-cutting editing easier.

8. Various-format playbackPlayback of WMA, MP3, and JPEG formats is supported.

9. Other functions and specificationsThe following main functions and specifications adopted with conventional models are also provided with this model:• 192-kHz, 24-bit DAC• 48-kHz, 20-bit ADC• Digital 3-D Y/C separation circuit• Digital frame TBC• 3-D DNR• DV (iLink) input/output• Playback with commercials skipped• CD/video-CD playback• Picture creation• Recording with 3/4-D1 and 2/3-D1 resolutions• Recording mode with 32-step MNs• LPCM recording• High-resolution GUI

1 2 3 4

C

D

F

A

B

E

147

5 6 7 8

7.4 CAUTIONS ON HANDLING THE HDD

Reference: Main specifications on damage to the HDD

The HDD is about 10 times as sensitive to shock during operation than during nonoperation.

During operation During nonoperationShock G (acceleration)

<approx. 20 G <approx. 200 G

Temperature change < 20°C/hour

Moisture change < 20%/hour

0.5 inch / 12.7 mm 387 217 200 26

1.0 inch / 25.4 mm 595 457 310 37

2.0 inch / 50.8 mm 1133 600 680 70

4.0 inch / 101.6 mm 1795 1040 1050 267

Reference: Estimate value of falling distance vs. shock (G) when the HDD is dropped without protection

LandingsurfaceFalling

distanceGranitesurface

Concretefloor

Synthetic-resin-coated table

Antistaticsponge

(1) Cautions on Handling the HDD• The HDD is very sensitive to shocks and vibrations. Care must be taken especially during operation (when the power is on).• The HDD is very sensitive to electrostatic charges.• Rapid change in temperature or humidity may cause deterioration of the HDD.

Note: After receiving damage caused by any above-mentioned factors, the HDD may operate normally for dozens or some hundreds ofhours but then suddenly crash. If you are certain you have damaged a new repair part (HDD) while making repairs, do not use thepart.

(2) Cautions on handling the product on which the HDD is mounted or the HDD as a repair part, and examples of dangerous handling[Cautions on handling the product on which the HDD is mounted]• While the unit is turned on, the HDD is always in operation. Be sure NOT to impart shock to the unit.

÷ Examples of dangerous handling: while the power is on• Bumping on the bonnet• Dropping an object, such as a small screwdriver or remote control unit, onto the bonnet, or bumping an object against the cabinet• Moving the unit by dragging• Stacking another product on the unitNote: Be sure NOT to impart shock, such as bumping or hitting a screwdriver against the HDD, during diagnosis with the bonnet open.

÷ Examples of dangerous handling: while the power is off• Imparting strong shock, although the HDD is more resistant to shock when the power is off• Dropping the unit from a height of several centimeters, or after lifting one side of the unit up, then letting the unit drop.

• Do NOT move the unit immediately after the power is turned off. Wait at least 30 seconds after the indication on the FL display changedfrom POWER OFF to the clock indication before moving the unit.If the AC power cord is accidentally disconnected before turning the unit off, wait at least for one minute before moving it. In this case,damage to the HDD caused by sudden shutoff may be small, because the emergency relief mechanism is activated. However, if suddenshutoff occurrs during recording or playback, recorded data may be damaged. Be sure to check operations.

[Cautions on handling the HDD as a repair part]1. Handle the HDD in a safe environment:

• Handle the HDD over an antistatic pad that can also absorb shock.• Wear wrist bands to prevent electrostatic charges generated in your body from affecting the HDD.

2. The following must be observed when handling the HDD:• Handle one HDD at a time. Do NOT hold several HDDs at the same time.• Grip the HDD on both sides so that you do not touch its terminals or circuit boards.• Do NOT stack one HDD onto another HDD (even if the HDDs are protected in antistatic bags).• Do NOT bump the HDDs against one another.• Do NOT bump any tool, such as a screwdriver, or other hard object against the HDD.• When a repair part (HDD) is transported and there is a large temperature difference between outdoors and indoors, to the indoor, leave it in its package for about a half day to gradually cool or warm the HDD to room temperature before unpacking it.

[Notes on packing for shipment]• When returning a defective HDD for analysis, handle with care as if it were a good product. Otherwise, the results of analysis may not be

correct.• When packing, use the antistatic bag and packing materials in which the repair part for service was delivered. Attach a copy of the slip for

service or a memo stating symptoms in as much detail as possible.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S148

1 2 3 4

Maxtor

DVR-520H-S 80GB VXF1010 4R080L0- VXF1043 WD800BB -xxHEAx

VXF1036 ST38001&ACE-

DVR-720H-S 160GB VXF1028 4R160L0- VXF1055 WD1600BB -xxFTAx

VXF1040 ST316002&ACE-

Capacity

Maxtor Western Digital SeagateModelName

Pioneer'sPart No.

(for service)

Manufacture'sPart No.

Pioneer'sPart No.

(for service)


Pioneer'sPart No.

(for service)


Capacity

Manufacturer'spart No.

Date ofManufacturer

Maxtor

Confirmation of the jumper pin location of the HDD

Fig.1 Location of the data on capacity and part No. of the HDD

SeagateNote : The body of HDD 80GB and 160GB/250GB types of Western Digital are different.

Seagate

Western Digital (80GB) Western Digital (160GB)

Western Digital

Capacity

Manufacturer'spart No.

Date ofManufacturer

Outline and part No. of the HDDs

Jumper pinSetting : Cable Select(CS)

Jumper pin

Setting : Cable Select(CS)

Jumper pin

Setting : Cable Select(CS)

How to read the information of Seagate HDD

Ex. Date Code 0435x 04 year (from July) manufactured on 35th week

*Pioneer's part No. is not stamped.

• When replacing the HDD, carefully check the capacity and manufacturer's part No. on the part label to avoid replacing with a similar butinappropriate product. You can also check the model No. of the mounted HDD on the Service mode screen.

• Do NOT use repair parts, such as commercially available HDDs, other than those designated above, as their functions, performance orreliability cannot be guaranteed.

1 2 3 4

C

D

F

A

B

E

149

5 6 7 8

7.5 DISC/CONTENT FORMATDisc / content format playback compatibility

General disc compatibilityThis recorder is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging. Note however that some disc types, such as recordable CD and DVD, may be in an unplayable format—see below for further compatibility information.

Also compatible with KODAK Picture CD

is a trademark of Fuji Photo Film Co. Ltd.

DVD-R/RW compatibilityThis recorder will play and record DVD-R/RW discs.

Compatible media:

DVD-RW Ver. 1.1, Ver. 1.1 / 2x and Ver. 1.2

DVD-R Ver. 2.0 and Ver. 2.0 / 4x / 8x

Recording formats:

DVD-R: DVD-Video format (Video mode)

DVD-RW: Video Recording (VR) format and DVD-Video format (Video mode)

CD-R/RW compatibilityThis recorder cannot record CD-R or CD-RW discs.

Compatible formats: CD-Audio, Video CD, ISO 9660 CD-ROM* containing MP3, WMA or JPEG files* ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this recorder.

Multi-session playback: Yes (except CD-Audio and Video CD)

Unfinalized disc playback: CD-Audio only

Compressed audio compatibilityCompatible media: CD-ROM, CD-R, CD-RW

Compatible formats: MPEG-1 Audio Layer 3 (MP3), Windows Media Audio (WMA)

Sampling rates: 44.1 or 48kHz

Bit-rates: Any (128Kbps or higher recommended)

VBR (variable bit rate) MP3 playback: Yes

VBR WMA playback: No

WMA encoder compatibility: Windows Media Codec 8 (files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not supported; specifically, Pro, Lossless, Voice and VBR)

DRM (Digital Rights Management) file playback: No (see also DRM in the Glossary on page 97)

File extensions: .mp3, .wma (these must be used for the recorder to recognize MP3 and WMA files – do not use for other file types)

File structure: Up to 99 folders / 999 files (if these limits are exceeded, only files and folders up to these limits are playable)

WMA (Windows Media Audio) compatibility

The Windows Media® logo printed on the box indicates that this recorder can playback Windows Media Audio content.

WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA content can be encoded by using Windows Media® Player version 7, 7.1, Windows Media® Player for Windows® XP, or Windows Media®

Player 9 Series.

Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

JPEG file compatibility Compatible formats: Baseline JPEG and EXIF 2.2*

still image files*File format used by digital still cameras

Sampling ratio: 4:4:4, 4:4:2, 4:2:0

Horizontal resolution: 160 – 5120 pixels

Vertical resolution: 120 – 3840 pixels

Progressive JPEG compatible: No

DVD-Video DVD-R DVD-RW

Video CD

Fujicolor CD

Audio CD CD-R CD-RW

File extensions: .jpg, jpeg, jif, jfif (must be used for the recorder to recognize JPEG files – do not use for other file types)

File structure: The recorder can load up to 99 folders / 999 files at one time (if there are more files/ foldersthat this on the disc then more can be reloaded)

PC-created disc compatibilityDiscs recorded using a personal computer may not be playable in this uni t due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.

Discs recorded in packet write mode (UDF format) are not compatible with this recorder.

Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.

•

•

• •

•

•

•

•

•

•

•

• •

•

•

•

•

•

•

•

• •

•

•

•

•

This recorder also supports the IEC’s Super VCD standard. Compared to the Video CD standard, Super VCD offers superior picture quality, and allows two soundtracks to be recorded. Super VCD also supports the widescreen size.

VIDEOCD

Super Video CD (Super VCD)

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S150

1 2 3 4

7.6 CLEANING

Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:

Position to be cleaned Cleaning tools

Pickup lenses Cleaning liquid : GEM1004Cleaning paper : GED-008

Position to be cleaned Cleaning tools

Fans Cleaning paper : GED-008

1 2 3 4

C

D

F

A

B

E

151

5 6 7 8

8. PANEL FACILITIES8.1 FRONT SECTION

Front panel

OPEN/CLOSE REC

DV IN/OUT

7

3

•

1 STANDBY/ONPress to switch the recorder on/into standby.

2 HDDPress to switch to the hard disk drive (HDD) for recording and playback. The button lights when HDD is selected.

3 DVDPress to switch to DVD for recording and playback. The button lights when DVD is selected.

4 IR remote sensor

5 Disc tray

6 Front panel displaySee Display on page 22 for details.

7 DV IN/OUT jack Digital input/output jack for use with a DV camcorder.

8 +/– Use to change TV channels, skip chapters/tracks, etc.

9 ONE TOUCH COPY Press to start One Touch Copy of the currently playing title to DVD or the HDD.

10 RECPress to start recording.

11Press to stop recording.

12Press to start or restart playback.

13Press to stop playback.

14 OPEN/CLOSEPress to open/close the disc tray.

15 Front panel inputs Pull the cover down where indicated to access the front panel input jacks. Especially convenient for connecting camcorders and other portable equipment.

PULL-OPEN

STANDBY/ONDVDHDD

ONE TUCH COPY

1 2 3 4 65

781112131415 910Illustration shows DVR-520H

0

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S152

1 2 3 4

8.2 REAR PARTRear panel connections

Front panel connections

On the left side of the front panel a flip-down cover hides a third audio/video input, consisting of an S-video and standard (composite) video jack, and stereo analog audio jacks.

On the right side is the DV input/output i.LINK connector. This is for connection to a DV camcorder.

PULL-OPEN

VIDEO/R/RW

VIDEOS-VIDEO

1 ANTENNA IN/OUTConnect your TV antenna to the ANTENNA IN jack. The signal is passed through to the ANTENNA OUT jack for connection to your TV.

2 OUTPUT jacksStereo analog audio, video and S-video outputs for connection to a TV or AV amplifier/receiver.

3 AV1(RGB)-TV AV connectorAudio/video output SCART-type AV connector for connecting to a TV or other equipment with a SCART connector. The video output is switchable between video, S-video and RGB. See page AV1 Out for how to set this up.

4 AV2/AUTO START REC (INPUT 1/DECODER) AV connectorAudio/video input/output SCART-type AV connector for connecting to a VCR, or other equipment with a SCART connector. The input accepts video, S-video and RGB. See AV2/L1 In for how to set this up.

5 CONTROL INUse to control this recorder from the remote sensor of another Pioneer component with a CONTROL OUT terminal and bearing the Pioneer mark. Connect the CONTROL OUT of the other component to the CONTROL IN of this recorder using a mini-plug cord.

6 DIGITAL OUT OPTICALFor connecting to an AV receiver, Dolby Digital /DTS/MPEG decoder or other equipment with optical digital input.

7 AC IN – Power inlet

DIGITAL OUT

AC IN

OPTICALCONTROL

IN

INOUT

ANTENNA

R L

AUDIO VIDEO S-VIDEOOUTPUT

AV 2/AUTO START REC (INPUT 1/DECODER)

AV1 (RGB) -TV

1 32 4 5 6 7

PULL-OPEN

VIDEO/R/RW

DV IN/OUT

DV IN/OUT

1 2 3 4

C

D

F

A

B

E

153

5 6 7 8

8.3 DISPLAYDisplay

1Arrows indicate the copy direction between the HDD

( ) and DVD ( ).

2 PLAY /

/

REC indicatorsLights during playback / recording; blinks when playback / recording is paused.

3The ‘ ’ indicators light to indicate that the HDD or DVD is selected for recording/playback.

4 PL Lights when a VR mode disc is loaded and the recorder is in Play List mode.

5 2 3 Shows the remote control mode (if nothing is displayed, the remote control mode is 1).

6 REMLights when the character display is showing the remaining available recording time.

7 VLights when an unfinalized Video mode disc is loaded.

8 R / RWIndicates the type of recordable DVD loaded: DVD-R or DVD-RW.

9Lights when a timer recording has been set. (Indicator blinks if the timer has been set to DVD but there isn’t a recordable disc loaded, or the timer has been set to HDD but the HDD is not recordable.)

AUTO Lights when Auto Start Recording has been set, and during Auto Start Recording.

10 Recording quality indicators

FINELights when the recording mode is set to FINE (best quality).

SPLights when the recording mode is set to SP (standard play).

LPLights when the recording mode is set to LP (long play).

EPLights when the recording mode is set to EP (extended play).

MNLights when the recording mode is set to MN (manual recording level) mode.

11 Character display

12 Indicates which channels of a bilingual broadcast are recorded.

13 VPS / PDC Lights when receiving a VPS/PDC broadcast during a VPS/PDC-enabled timer recording.

14 NTSCLights when playing NTSC format video.

15 OVER Lights when the analog audio input level is too high.

1312 14 1511

4 5 6 7 8 9 10321

3

33

=+

•

3’ and ‘3

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S154

1 2 3 4

8.4 REMOTE CONTROL

DVD RECORDER

STANDBY/ON OPEN/CLOSE

0

0

INPUTSELECT

ShowView

TV/DVD

AUDIO SUBTITLE ANGLE PLAYMODE

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

CHANNEL

DISC NAVIGAOR PLAYLIST

MENU

RETURNHOMEMENU

DISC NAVI CHP EASY

INPUT

PAUSE STOP OK SKIPCMBACK

REV SCAN PLAY FWD SCAN

SELECTION

REC

PREV NEXT STEP/SLOW

STOP REC REC MODE TIMER REC

HISTORY MARK MARK TIMER

SELECT

DISPLAYTV CONTROL

CHANNEL VOLUME

Remote control

1 ONE TOUCH COPY Press to start One Touch Copy of the currently playing title to DVD or the HDD.

2 Remote control indicatorLights when setting up the remote control for use with a TV and when setting the remote control mode

3 STANDBY/ONPress to switch the recorder on/into standby.

4 OPEN/CLOSEPress to open/close the disc tray.

5 HDD Press to select the hard disk (HDD) for recording or playback.

6 DVD Press to select the DVD for recording or playback.

7 DVD playback functions

AUDIOChanges the audio language or channel. (When the recorder is stopped, press to change the tuner audio.)

SUBTITLEDisplays/changes the subtitles included in multilingual DVD-Video discs.

ANGLESwitches camera angles on discs with multi-angle scenes.

8 PLAY MODE Press to display the Play Mode menu (for features such as search, repeat and program play).

9 TV/DVD Press to switch between ‘TV mode’, in which you get the picture and sound from the TV’s tuner, and ‘DVD mode’, in which you get picture and sound from the recorder’s tuner (or an external input).

10 Alphanumeric buttons and CLEARUse the number buttons for track/chapter / title selection; channel selection, and so on. The same buttons can also be used to enter names for titles, discs and so on.

Use CLEAR to clear an entry and start again.

11 INPUT SELECT Press to change the input to use for recording.

12 CHANNEL +/– Press to change the channel of the built-in TV tuner.

13 S HOWVIEW (for WY model)Press, then use the number buttons to enter a ShowView programming number for timer recording.

13 Video Plus + (for WV model)Press, then use the number buttons to enter a PlusCode programming number for timer recording.

14 DISC NAVIGATOR / TOP MENU

Press to display the Disc Navigator screen, or the top menu if a DVD-Video disc is loaded.

15 PLAY LIST / MENU Press to switch between Original and Play List content on VR mode discs, or display the disc menu if a DVD-Video disc is loaded.

16 (cursor buttons) and ENTERUsed to navigate all on-screen displays. Press ENTER to select the currently highlighted option.

17 HOME MENU Press to display the Home Menu, from which you can navigate all the functions of the recorder.

18 RETURNPress to go back one level in the on-screen menu or display.

ONE TOUCHCOPY

TOP MENU

HDD DVD

+

TV DIRECTREC

1 2

4

8

12

15

18

3

5

13

14

16

17

19

20

23

7

21

6

11

9

22

24

10

» /« /| /\

CLEAR

Ee

•

ENTER

R

1 2 3 4

C

D

F

A

B

E

155

5 6 7 8

Ee

4 4

•

PREV / NEXT

¡¡

7

8

3

19 Playback controls

REV SCAN / FWD SCAN Press to start reverse or forward scanning. Press again to change the speed.

PLAYPress to start playback.

PAUSEPress to pause playback or recording.

STOPPress to stop playback.

CM BACK (commercial back)Press repeatedly to skip progressively backward through the audio or video playing.

CM SKIP (commercial skip)Press repeatedly to skip progressively forward through the audio or video playing.

Press to skip to the previous or next title/chapter/track/folder; or to display the previous or next menu page.

STEP/SLOW During playback, press to start slow-motion playback; while paused, press to show the previous or next video frame.

20 Recording controls

RECPress to start recording. Press repeatedly to set the recording time in blocks of 30 mins.

STOP RECPress to stop recording.

REC MODE Press repeatedly to change the recording mode (picture quality).

TIMER REC Press to set a timer recording from the standard Timer Recording screen.

EASY TIMER Press to set a timer recording from the Easy Timer Recording screen.

21 DISC HISTORY Press to display summary information (disc name, recording time left, etc.) from the last 30 recordable discs loaded.

NAVI MARK Press to select a thumbnail picture for the current title for use in the Disc Navigator screen.

CHP MARK Press to insert a chapter marker when playing/recording a VR mode DVD-RW disc or the HDD.

22 DISPLAY Displays/changes the on-screen information displays.

23 TV CONTROL After setting up, use these controls to control your TV.

24 TV DIRECT REC Press to start recording whatever channel your TV is set to.

DVR-520H-S5 6 7 8

C

D

F

A

B

E

DVR-520H-S156

1 2 3 4

Service Remote Control Unit GGF1381DVD Test Disc (DVD-Video) GGV1025

adjustment, diagnosisName Jig No. Remarks

Check of DVD-VideoDVD Recorder Data Disc GGV1179 (*) diagnosis (ID data setting)Flexible Cable (40P) GGD1370 diagnosis of Drive Assy

7 Jigs list

(*) : GGV1134 is now released, however GGV1179 will be released in JUNE/2004. Until GGV1179 is released, use GGV1134 data disc.

1 2 3 4

ORDER NO.

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2004

Serial No.Model Type Power Requirement Region No. Piease confirm 3rd & 4th

alphabetical letters.DVR-520H-S RLTXU AC110-127V/220-240V 3 &&PG######$$

DVR-720H-S RLXU AC110-127V/220-240V 3 &&PG######$$

RRV2996

DVD RECORDER

DVR-520H-SDVR-720H-S

T – ZZV JULY 2004 Printed in Japan

Model No. Order No. Remarks

DVR-520H-S/WYXU RRV2979

¶ This service manual should be used together with the following manual(s):

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

CONTENTS1. CONTRAST OF MISCELLANEOUS PARTS ........ 2

2. SCHEMATIC DIAGRAM ....................................... 6

3. PCB CONNECTION DIAGRAM .......................... 14

4. MODEL SETTING ............................................... 18

2

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

PCB ASSEMBLIESP11- 1 1..TUNB ASSY VWV2003 VWV2018 VWV2018

NSP 1..JACB/JCKB ASSY VWM2257 VWM2264 VWM2264P11- 2 2..JCKB ASSY VWV2024 VWV2022 VWV2022P11- 6 2..ATWB ASSY VWV2005*1 VWV2009*1 VWV2009*1 *1 Constructed same.P11- 7 2..ATHB ASSY VWV2002*2 VWV2011*2 VWV2011*2 *2 Constructed same.

P11- 3 1..MAIN ASSY VWV2013 VWV2025 VWV2025P11- 8 1..SDEB ASSY VWV2033 Not used Not used

NSP 1..FLKB ASSY VWM2304 VWM2258 VWM2258P13- 2 2..KIRB ASSY VWG2521 VWG2493 VWG2493

PACKING SECTIONP9- 4 Remote Control VXX2910 VXX2934 VXX2934P9- 5 Battery Cover AZA7424 AZN7933 AZN7933P9- 7 Operating Instructions (English) VRB1339 VRB1341 VRB1341P9- 8 Operating Instructions (French) VRC1205 Not used Not usedP9- 9 Operating Instructions (German) VRC1206 Not used Not used

P9-10 Operating Instructions (Italian) VRC1207 Not used Not usedP9-11 Operating Instructions (Dutch) VRC1208 Not used Not usedP9-12 Operating Instructions (Spanish) VRC1209 Not used Not used

Operating Instructions (Chinese) Not used VRC1213 VRC1213P9-15 NSP Warranty Card ARY7065 Not used Not used

P9-17 NSP Polyethylene Bag AHG7097 Not used Not usedP9-17 Polyethylene Bag Not used VHL1051 VHL1051P9-23 Packing Case VHG2554 VHG2555 VHG2574

EXTERIOR SECTIONP11-11 HDD 80G 4R080L0 SV VXF1010 VXF1010 Not usedP11-11 HDD 160G 4R160L0 SV Not used Not used VXF1028P11-13 Ferrite Core ATX1048 Not used Not usedP11-15 Connector Assy (15P) PF15PP-D47 Not used Not usedP11-15 Housing Assy (15P) Not used VKP2328 VKP2328

P11-22 Shield Flexible Cable (40P) VDA2031 Not used Not usedP11-22 Flexible Cable (40P) Not used VDA2043 VDA2043P11-23 Flexible Cable (15P) VDA2041 Not used Not usedP11-28 Earth Plate VBK1153 Not used Not usedP11-41 Rear Panel VNA2696 VNA2741 VNA2761

P11-61 Bonnet Label VRW2115 VRW2142 VRW2142NSP SISIR Label Not used VRW2156 VRW2158 Rear Panel

1. CONTRAST OF MISCELLANEOUS PARTS

j p f yFor the applying amount of lubricants or glue, follow the instructions in this manual.(In the case of no amount instructions, apply as you think it appropriate.)

Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.Screws adjacent to mark on product are used for disassembly.Reference Nos. indicate the pages and Nos. in the service manual for the base model.

NOTES:

•When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%).

560 Ω → 56 × 101 → 561 ........................................................ RD1/4PU 5 6 1 J47k Ω → 47 × 103 → 473 ........................................................ RD1/4PU 4 7 3 J0.5 Ω → R50 ..................................................................................... RN2H R 5 0 K1 Ω → 1R0 ..................................................................................... RS1P 1 R 0 K

Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).5.62k Ω → 562 × 101 → 5621 ...................................................... RN1/4PC 5 6 2 1 F

CONTRAST TABLEDVR-520H-S/RLTXU, DVR-720H-S/RLXU and DVR-520H-S/WYXU are constructed the same except for the following :

Part No.

RemarksDVR-520H-S DVR-520H-S DVR-720H-S/WYXU /RLTXU /RLXU

Ref.No.

Mark Symbol and Description

3

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

Notes : For PCB ASSEMBLIES, Refer to “CONTRAST OF PCB ASSEMBLIES”, “PCB PARTS LIST”, “2. SCHEMATIC DIAGRAM” and“3. PCB CONNECTION DIAGRAM”.

Part No.

RemarksDVR-520H-S DVR-520H-S DVR-720H-S/WYXU /RLTXU /RLXU

FRONT PANEL SECTIONP13- 8 FL Filter VEC2421 Not used Not usedP13- 10 FL Lens VNK5486 Not used Not usedP13-10 NSP FL Lens Not used VNK5422 VNK5638P13-11 Front Panel Assy VXA2651 VXA2653 VXA2696P13-14 Jack Door VNK5496 VNK5497 VNK5497

P13-22 NSP Main key VNK5436 Not used Not usedP13-23 NSP Cap VNK5437 Not used Not used

Ref.No.

Mark Symbol and Description

TUNB ASSYFA

Mark Symbol and DescriptionPart No.

RemarksVWV2003 VWV2018

Q305 DTA124EUA Not usedQ306 2SC4081 Not usedQ311 RN1903 Not usedQ314, Q316, Q317 Not used 2SC4081Q319 2SA1576A Not used

D303 Not used 1SS356F302 Not used BTF1121F305 VTF1179 VTF1178L313 Not used LCYA150J2520L316 LCKAW330J2520 Not used

C306 CCSRCH102J50 Not usedC345 CCSRCH150J50 Not usedR317 RS1/16S103J Not usedR318, R360 RS1/16S102J Not usedR324, R344 RS1/16S472J Not used

R327 RS1/16S271J RS1/16S470JR329 RS1/16S681J Not usedR337, R361 RS1/16S0R0J Not usedR345 RS1/16S221J Not usedR350 Not used RS1/16S0R0J

R351–R353 Not used RS1/16S472JR354 Not used RS1/16S103JR355 Not used RS1/16S271JR356, R357 Not used RS1/16S472J

VWV2018 and VWV2003 are constructed the same except for the following :

CONTRAST OF PCB ASSEMBLIES

MAIN ASSYFC


RemarksVWV2013 VWV2025

IC2211, IC2302 SN74AHC2G53HDCT Not usedQ2241 2SC4081 Not usedC1054 Not used CEVW221M4C2210, C2241, C2302 CKSRYF104Z25 Not usedC2220, C2243 CEVWNP100M10 Not used

C2223 Not used CKSRYF104Z25C3006 CKSRYF105Z10 CKSRYF104Z25R2027, R2214, R2308 Not used RS1/16S0R0JR2047 RS1/16S0R0J Not usedR2252 Not used RS1/16S102J

R2253 RS1/16S123J Not usedR2254 RS1/16S102J Not usedR2255 RS1/16S103J Not used

VWV2013 and VWV2025 are constructed the same except for the following :

4

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

KIRB ASSYFE


RemarksVWG2521 VWG2493

D1201 SLR-343BBT SLR-343DCD1203 SLR-343DC SLR-343BBTR1204 RS1/10S472J RS1/10S271JR1206 RS1/10S271J RS1/10S182JR1207 Not used RS1/10S182J

R1208 RS1/10S0R0J Not usedR1209 Not used RS1/16S0R0J

VWG2493 and VWG2521 are constructed the same except for the following :

FBMark No. Description Part No.

PCB PARTS LISTMark No. Description Part No.

JCKB ASSY

SEMICONDUCTORSIC204 BR24L32F-WIC701 LA73033MIC601 LC75342MIC501 MM1504XN

> IC101 MM1565AF

IC401 MSP3455G> IC103 NJM78M09FA

IC202 PEG049*> IC102 PQ1K333M2ZP

IC201 PST3245

IC203 RS5C372AIC206 TC74HCT7007AFIC205 TC7WU04FUQ404–Q407, Q506, Q508, Q510 2SA1576AQ701 2SA1576A

Q104 2SB1238XQ102, Q103 2SC2411KQ105, Q172, Q205, Q402, Q403 2SC4081Q702 2SC4081Q401 2SD1664

Q204 2SD2114KQ171, Q202, Q203, Q707, Q710 DTA124EUAQ206, Q712 DTC124EUAQ514 HN1B04FUQ173 HN1C01FU

Q708, Q711 HN1C03FUQ201 RN1901Q703, Q706, Q709 RN4903Q101 UMF21ND102 1SR154-400

D203 1SS352D201, D401, D716, D717 1SS355D601, D602, D604, D605 DF3A5.6FUD718–D720 DF3A5.6FUD103, D202 RB501V-40

D607 UDZS5R1

COILS AND FILTERSL401 CTF1399L503–L505 LAU100J

L403, L404 LAU150JL701 LAU2R2JL171 LAU470JL405 LAU4R7JL402 LAU8R2J

L103 LCYA100J2520L102 LTA102JL205–L208, L284 CHIP BEAD VTL1081

CAPACITORSC211, C220, C225, C226 CCSRCH101J50C619–C621 CCSRCH101J50C434, C435, C439 CCSRCH102J50C245 CCSRCH120J50C413 CCSRCH121J50

C516, C522, C528, C720, C721 CCSRCH150J50C422 CCSRCH181J50C440, C441 CCSRCH220J50C140 CCSRCH221J50C249, C250, C517, C523, C529 CCSRCH270J50

C172 CCSRCH330J50C542 CCSRCH331J50C221, C232, C233, C412, C543 CCSRCH470J50C430, C432 CCSRCH560J50C177 CCSRCH561J50

C431 CCSRCH5R0C50C420, C702 CCSRCH680J50C215 CCSRCH681J50C433 CCSRCH6R0D50C174, C415, C425, C601–C603 CEAT100M50

C607–C611, C614–C616, C618 CEAT100M50C103, C107, C117, C118 CEAT101M10C125, C126, C128, C141, C214 CEAT101M10C402, C404, C424, C426, C507 CEAT101M10C652, C717, C727 CEAT101M10

C121, C123, C133, C401, C407 CEAT101M16C410, C604, C612 CEAT101M16C748, C751 CEAT101M6R3C704, C716, C719 CEAT102M6R3C539 CEAT220M25

C738 CEAT221M16C739 CEAT221M6R3C417 CEAT3R3M50C740, C744 CEAT470M16C135 CEAT471M16

5

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

C705, C706 CEAT471M6R3C137 CEJQ101M16C102 CKSQYB225K10C429 CKSRYB102K50C129, C224, C406, C418, C436 CKSRYB103K50

C606, C617, C747 CKSRYB103K50C222, C223, C707, C708 CKSRYB104K16C711–C713, C718, C723–C725 CKSRYB104K16C728–C730, C732–C735, C737 CKSRYB104K16C741 CKSRYB104K16

C502 CKSRYB105K10C428, C438 CKSRYB472K50C241 CKSRYF103Z50C104–C106, C115, C116 CKSRYF104Z25C119, C120, C122, C124, C127 CKSRYF104Z25

C130–C132, C134, C136, C139 CKSRYF104Z25C171, C173, C175, C176 CKSRYF104Z25C202–C204, C216, C217, C228 CKSRYF104Z25C234, C239, C240, C244, C246 CKSRYF104Z25C403, C405, C408, C409, C411 CKSRYF104Z25

C414, C416, C419, C421, C423 CKSRYF104Z25C427, C437, C501, C519, C525 CKSRYF104Z25C531, C605, C613, C653 CKSRYF104Z25C709, C710, C714, C715, C726 CKSRYF104Z25C731, C736, C749, C750, C752 CKSRYF104Z25

C760 CKSRYF104Z25C101, C209, C210, C212, C213 CKSRYF105Z10C218, C219, C227, C231, C236 CKSRYF105Z10

RESISTORSR407, R410 RS1/10S0R0JR412 RS1/10S100JR178 RS1/16S1501FR173 RS1/16S3901FR519, R526, R534 RS1/16S5600F

R602, R605, R606, R615–R617 RS1/16S75R0FR704, R715, R717, R718 RS1/16S75R0FR728–R730, R740, R743, R747 RS1/16S75R0FR757–R759 RS1/16S75R0FOther Resistors RS1/16S###J

OTHERSCN202 9P FFC CONNECTOR 52045-0945CN705 13P FFC CONNECTOR 52045-1345CN201 19P FFC CONNECTOR 52045-1945CN401 19P PLUG AKP7062CN104 KR CONNECTOR B13B-PH-K

CN105, CN703 KR CONNECTOR B2B-PH-KJA651 OPTICAL LINK OUT 8MB/S JFJ1001JA201 REMOTE CONTROL JACK RKN1004

> BT201 LITHIUM BATTERY(CR2032) VEM1033JA7011 3P PIN JACK VKB1150

JA601 JACK VKB1183JA702 JACK VKB1184CN702 CONNECTOR VKN1200CN701 32P CONNECTOR VKN1263KN801, KN802 VNF1084

WRAPPING TERMINAL VNF1084

X201 CERAMIC RESONATOR ASS7034

Mark No. Description Part No.X203 CRYSTAL RESONATOR VSS1176

(4.433619 MHz)X401 CERAMIC RESONATOR VSS1189

(18.432 MHz)

X202 CRYSTAL RESONATOR VSS1197(32 kHz)


6

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

A F

(IF

)(I

F)

(IF

)

(T)

(PIF)

(PIF)

(T)

(SIF)

(SIF)

(SIF)

2. SCHEMATIC DIAGRAM2.1 TUNB ASSY

7

5 6 7 8

5 6 7 8

C

D

F

A

B

E

DVR-520H-S

CN401

TUNB ASSY (VWV2018)

CN300

B 2/2F

A F

A F

NOTES: • When ordering service parts, be sure to refer to “EXPLODED VIEWS and PARTS LIST” or “PCB PARTS LIST”.

• The > mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.

• : The power supply is shown with the marked box.

: Video Signal Route (TUNER)(T)

(T)(T)

: PIF Signal Route (TUNER)(PIF)

: IF Signal Route (TUNER)(IF)

: SIF Signal Route (TUNER)(SIF)

(SIF) (SIF)

(SIF)

8

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

2.2 JCKB ASSY(1/2)

B 1/2F

B 1/2F

CN

201

B 2/2F

B 2/2F

B 2/2F

JCKB ASSY (VWV2022)

H

2/2B

2/2B


: Video Signal Route(Y)

: Video Signal Route (C)


(C)

(Y)

(Y)

(C)

(C)

1

9

5 6 7 8

5 6 7 8

C

D

F

A

B

E

DVR-520H-S

B 1/2F

B 2/2F

B 2/2F

CN1001D

PEG049*-K

TUFL u-com

EEPROM

Lithium Battery

10

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

2.3 JCKB ASSY(2/2)

B 2/2F

B 2/2F JCKB ASSY (VWV2022)

CN300

CN

1301

F B 1/2F

B 1/2F

B 1/2F

A F: Video Signal Route (TUNER)

: Video Signal Route(T)



(Y)

: Audio Signal Route (DIGITAL)(D)

: Video Signal Route (C)(C)

(Y)

(C)

: Video Signal Route (Cb)(Cb)

: Video Signal Route (Cr)(Cr)

(T)2

11

5 6 7 8

5 6 7 8

C

D

F

A

B

E

DVR-520H-S

B 2/2F

B 1/2F

CN3001C 3/5

CN2001C 2/5F

FromDRIVE ASSY (R7R)

(T)

(Y)

(Y)

(Cr)

(Cb)

(Y) (Y

)

(C) (C

)(Y)

(D)

(D)(D)

(D) (D)

(C)

(Y)

(Cb)

(Cr)

(Y)

(Y)

(Y)

(C)

5 613 12

1514

11

181716

98

7 3

4

10

Video Selector&

Video Driver

12

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

2.4 MAIN ASSY(2/5)

C 2/5F

C 2/5F

C 1/5

C 1/5

C 1/5

C 1/5

C 1/5

MAIN ASSY (VWV2025)

13

5 6 7 8

5 6 7 8

C

D

F

A

B

E

DVR-520H-S

C 2/5F

C 1/5

C 1/5

C 1/5

C 3/5

CN

701

B2/2

F

C 3/5

C 3/5


7

17

16

9

10

8

13

12

11

4

15

3

5

6

14

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

1

91

40

1

10

1

14 8

71

87

59

29

1

5830

116 88

19

87

5

43

21

1815

14

13 12

11

109

87

6

5

43

21

13

10

1

1

5

4

8

1

-+

40 1

40

1

40 1

R20

2R320

R32

1

R22

1

Q201

R20

5

R204

C71

6

R262

R23

6

R215

R28

8

R28

7

R283

C218

C22

0

C219

C230

C22

8

C229

C20

9

C210

C211

R29

0

R28

9

R254

C22

2

R255

R250

JA201

C214

L202

L203L204

CN703

C20

2C

201

R234

R275

C248

C24

7

C13

5

CN202

Q10

4

L102

C137

C231

C23

3

C236 C23

9

R20

9

C10

7C

106

X202

C208

R271

D202

R218

R20

3R

207

BT201

C205

R282

L101

C10

3

CN14

C204

R20

1

C20

3

IC201

R273

R272

CN201

R258

R257

C177

R259

C176

C175

R216

R30

3

R30

2

R30

4

R231 R27

6

R269

R233

R261

IC206

IC202

R217

R20

6

KN801

R27

7

C17

3

C174

JA601

R23

0R

229

R210

CN705

R651

C651

IC65

1

JA651

CN105

C65

2

R256

R65

3

R24

3

R212

R214

R213

X20

3

C123

C121

C24

0

IC204

L201

R24

0

Q202

R11

1

C206

R268

R178

R179

R172

R183

D10

3

X201

R18

0

R292

R17

3

L171

Q173

Q17

1

R176

R174 Q172

C25

1

C25

2

R175R185

R293

R270

R200

R184

R299

R29

4

X20

4

BT202

R26

5 R26

4

CN11

C141R300

R308

CN12

R447R448

R454

R30

1

CN13

V+5M

SC

L

SD

A

SIDECONTACT

VNP1961-A

V+

5M

AGC

AFT

LRVCY

SD

ET

2

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

FLS

TB

FLD

AT

A

FLP

ON

GN

D

GN

D

KE

Y1

KE

Y2

DV

D

V+

5E

GN

D

V+

13 FLC

LK

NC

IR HD

D

V+5M

V+6SWV+13SW

SIDECONTACT

SIDECONTACT

CMKD-P3X

JCKB

VWV2011

VWV2009

CONTACT BOTTOM SIDE

ATHB

VWV (HDD)

VWV2036

ATWB

CONTACT BOTTOM SIDE

(WRITER)

W

25HDOCAT

E B

B2C

MODIFED TEXT

VWV

CMKD-P3XS

W

VWV

Q201Q702

Q404

Q405

Q406

Q407

Q703Q104

Q101

Q711

Q708

Q514

Q202

Q173

Q712

Q171

Q172

Q771

IC701

IC201

IC401

IC206

IC202

IC651

IC103

IC204

IC501

NP

1

91

40

1

5 1

1

14 8

71

116

1

88

29

30 58

5987

113

5

1

1

85

1 4

NP

+-

40 1

40

1

R

R

LF

40 1

LF

ATHB ASSYI

ATWB ASSYJ

to ASSYCN14

CN

4401

C CN

13

to HDD

CNR

CN4501C F

CN11

SIDE AJCKB ASSY

CN1001D

CN

201CN1301

CN705

B F

B F

R7 DRIVEASSY

CN703

Lithium Battery

3. PCB CONNECTION DIAGRAM3.1 JCKB ASSY

15

5 6 7 8

5 6 7 8

C

D

F

A

B

E

DVR-520H-S

131

1321

80 61

6041

4021

201

191

1

24

19

10

1

1

32

4434

33 23

2212

111

9

8

2

1

14 8

71

1815

14

13 1210

9

87

5

43

21

321

654

8

1

3 461

R72

1

R20

2

C729

C70

4

C717

R43

9R

440

R431

L506

R438

R43

7

R429

R428

R427

C54

9

D704D705

R22

1

Q201

C13

3

C71

9

R20

5

C718R204

C715

L404

C711

CN402

R70

1

C714

C708C707

C70

6

C710

C713

C709

C71

6

C70

5

C712

Q702

C415

C41

6

C41

7

C41

0R

414

C40

4

C40

2

C43

7

C42

3

R413

C41

8

C435

C434

Q404

C42

8

R41

8

R28

8

R28

7

CN104C

429

R420R419

Q405

R424Q406

IC701

C43

6R

430

C43

2C430

Q40

7

C427

C43

8R

434

C43

9

R436R435

C42

5

R29

0

C42

6

R28

9

C42

4

C44

0C

441

R73

6

R73

7

Q703

R714

L701

R711

C70

3

R55

3

R548

C72

2

CN401

C73

9

03

CN702

D706

D710

C40

7

C40

1

C23

9

C73

1

R808

R80

4

C734

C730R20

3R

207

C61

9

C620

C621

L403

L402

D714

C61

5

C61

4

C41

4

CN201

CN701

Q101

C728

R614

R61

3

R612

6

IC401

C73

2

R80

5

R30

3

R30

2

R30

4

C726

L508

L503

L504

L505

R27

6

CN704

C727

IC206

C725

R42

6

R74

8

Q71

1 R75

5

R75

3

R745

R74

9

C723

R72

4

Q514

R55

5

C54

3R556

C53

9C542

R55

4

JA702

R726

R20

6

R725

801

JA701

KN802

R27

7

R102 R103

C115

C11

7

C11

8

R23

0R

229

R81

2

L405

C738

C74

4

C74

0

C735

C61

8

C60

7

C602

C60

4

C60

8

C610

C61

2

C60

9

C61

1

C603

C601

C61

6

C73

6

C724

C733

R712

R42

5

R42

3

R42

1

R415

IC103

C12

8

C12

6

C12

5

C123

C121

R502

C507

R509D712

9

C74

9

C750

C75

2

X401

R18

0

Q712

Q17

1

C751

C25

1

C25

2

R56

2

R56

3

C748

R29

4

R56

5

CN403

R78

0

R56

4

R77

0

R771

R77

2

R773R774

Q771

R26

4

IC501

C501

C502

C141

R30

1

R78

5

R78

4

R783

R781

R782

C50

3

V+5M

Y_T

toM

Yto

M

Cto

M

Cr

NC

Rfr

omM

Y2

Y

Rto

M

Cr

CbY CS

YN

C

AFT

SD/STID

MIONTA

GND

NC

C LtoM

FOMOI

Lfro

mM

Cb

VWV2029

Y

GND

GND

GNDL

GNDNC

V+9

P_O

N

GND

NC AG

CC

TL

SCL

R

SD/SAP

GND

/LM

GND

GND

AGC

SDA

MUTE

TUON

V+6E

V+5VO

V+37E

SIF

JUST

LDASH

UVIN

G-LINK

GND

C_T

toM

CY2

GN

D

UPPER SIDEWORD SURFACE IS

LtoM

Cto

M

V+

5VO

FLO

N

GN

D

GN

DA

GN

D

SP

DIF

AS

CK

HS

Tto

M

SS

Tto

M

SS

Mto

T

HS

Mto

T

PC

MO

UT

MR

ST52

5P

XR

ST

V+

5VI

GN

DG

ND

GN

D

GN

D

P_CONT

GN

DG

ND

GN

DB

UP

LMUTE RMUTE

FLD

C-

FL-

28V

FLD

C+

GN

D EV

+37

V

GN

D

SW

+6V

GN

D

EV

+6V GN

DS

W+

13V

LfromM

RfromM

PC

VWV2019

VWV2028VWV2027VWV2023VWV2022

V+

13S

W

FLS

TB

FLD

AT

A

FLP

ON

GN

D

GN

D

KE

Y1

KE

Y2

DV

D

FLD

C+

FL-

28V

V+

5E

GN

D

V+

13 FLC

LK

NC

IR HD

D

GN

D

FLD

C-

V+

5VI

V+

5VO

V+

13S

W

V+

13S

W

V+

9

V+

9

V+5VO

V+5VI

V+6E

Rto

MYto

M

VWV2032

Y

CONTACT

CONTACT

T

SIDE

SIDE

VWV2035

WARNING

25249.6 - PROPOSITION 65HEALTH & SAFETY CODE SECTIONDEFECTS OR OTHER REPRODUCTIVE HARM.OF CALIFORNIA TO CAUSE CANCER,BIRTHCHEMICALS WHITCH ARE KNOWN TO THE STATEAND CERTAIN ELECTRICAL PARTS CONTAINTHIS PRODUCT CONTAINS LEAD IN SOLDER

E B C2

E2B2C

CVBS

CrCb

VWV

CMKD-P3X

VWV2015

SW

NP

113

1 13

2140

4160

6180

120

119

1

1

24

191

1

32

11

1222

2333

3444

1

14 8

71

NP

NP

1

ICT FC

LF

613 4

R

Q708

SIDE AC

N300

A

CN

401

CN2001

CN701

CN3001C C

CN702

CN201H

CN104(VNP1961-A)

B F

RIVEY

03

16

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

30 16

151

5

4

R517

R519R

518

C524

Q506

R523

R527

R720

R719

Q403

C525

Q402

R525

R722

C520

R536

R702

R601

R529

R524

R526

Q507

C526

C530

R530

Q508

R717

C132

C531

Q509R532 R

531

R534

R533

R535

Q510

R545

R402R

401

C536

C533

C538

R540R542

L507 R544

Q513

R433

R552

C546C541

C548

R557

R559

L509Q516

R561

C720

R716

R621

R620

R715

R604

R608R603

R522

R538

C419

C420

C421

C422

Q701

Q401

R403

L401

C403

R817

C409

C411

C405

R777

C130C

129

C433

C212

C431

R407

R406

R707R705R706

R704

C702 C721

R718

R551

R543

D708 D709

D707

C406

C408

C412

C413

D711

R801

R806 R809

C101

C

R735

R558R550

Q515

R546

R541

Q512

R521

R528

Q704

R807

C760

R208

Q710

Q707

Q709

Q706

D717

R560

R547

C540

C545C544

C532

C535C534

C517

C523

C529

C516

C522

C528

D702

R818

D703

D701

C547

C774

C537

C742

C743

C746

C745

R746

R739

R732

Q705

C527

C521

C515

R549

R757

R810

R811

R105

Q103

R723

R759

R729C737

R727

R742

R104

C116

Q102

C119

C741 R

728R

740

R743

R747

R730

D716

R751

R744

R734

R754

R756

R752 R741R750

R731

R611

C747

C605 IC601

C613

R609

R738

R733

R708

R710

R709

R713

R417

R416

R412

R411

R409

D401

R410

C127

C134

C124

C122

C120

D713

R408 R405R404

R501

R520

C514

C131

C518

C519Q505

R445

R446

R775

R444

R443

R4

R44

R760

R761

R306

R307

IC10

C108

R776

C755

C754

C753

R452

C761

C762

C763

C764

C768

C767

C766

C765

C6

R778

R779

D105

C771

C7C773C770

C769

C758

C757

C756

19

AGC

SDA

Rfrom

MLfrom

M

Cr

AG

CC

TL

YC

RtoM

NC

Y2NC

YtoM

CtoM

CS

YN

C

GNDSD/SAP

TUON

MUTE

Cb

NC

LtoM

GND

GND

FOMOI

V+6E

V+37E

SIF

JUST

LDASH

G-LINK

UVIN

L

RGND

V+9

AFT

SCL

GND

GND

GND

GND

NC

/LM

GND

GND

MIONTA

SD/STID

XRESET

V+5VO

P_O

NF

LON

FLD

C-

FL-28V

FLD

C+

GN

D

EV

+37V

GN

D

GN

D

SW

+6V

EV

+6V

GN

D

SW

+13V

GN

DV

+13S

W

FLD

C+

FL-28V

FLD

C-

V+

5VI

XR

ST

525PM

RS

TP

CM

OU

TH

SM

toTS

SM

toTS

ST

toMH

ST

toMA

SC

KS

PD

IF

BU

PG

ND

LMU

TE

RM

UT

EG

ND

GN

DP

_CO

NT

GN

DG

ND

GN

DG

ND

VWV

V+6SW

V+6E

V+13SW

FL-28V

V+13SW V+9V+13SWV+9

V+5VI

V+6EV+37E

V+5VO

CY

Y

Cr

Cb

E2B2C

EB C2E

C

B

VWV203VWV2032VWV2029

VWV2019VWV2022VWV2023

VWV2027VWV2028

VWV2015

GN

D

G-LIN

K

GND

GN

DA

GN

D

13

11

91

1

24

1

32

30 16

151

1ABC

10

0

3210 9876543210

1

LF

4

5

66 5 4 3 2 1

1234565 4 3 2 1

0VW

V20

0

9 8 7789

9 8 7

SIDE B

CN

401

CN

402

JCKB ASSY

CN701 CN702 CN104(VNP1961-A)

B F

B F

17

5 6 7 8

5 6 7 8

C

D

F

A

B

E

DVR-520H-S

64

3 1

1

85

4

1 4

58

75

4 1

1

R237

Q203

Q206

R220

R222

R223

R703

D607

C140

R608

C701

R603

C617

C606

R266

R263

C207

R239

C223

C224

C225

C221

C226

C227

C212

C213

R219

R242

R235

R245

R248

R246

R249

R251

R252

R253

C215

C216

C217

C136

Q205

Q204

C243

C242

C172

R107C138

C139

R109

R106

R108

R110

Q105

D101

D102

C232

C105

C104

IC102

D203

R278

R279

IC203

C246

C245

R280

R801

R281

R225

R224

R101

C101

C102

L103

R619

R618

R610

R607

R803

R247

R274

R284

C250

R286

C249

C241

R208

C254

D717

R232

C774 R

652

R758

R757

R615

R617

R616

R605

R606

R602

R759

R729C737

R727

R742

R226

C741 R

728

R228

R227

R740

R743

R802

47

C653

R655

R654

R244

R211

C244

R285

IC205

C122

C120

D201

R238

L205

R241

R260

R267

R295

R182

C171

R181

R171

D104

R113

R177

R291

L284

R186

R441

R442R

112

L206

L208

C253

R305

R306

R307

R298

R297

R296

IC101

C108

R449

R450

R451

R453

C234

Q408Q409

Q410

Q411

D601D602

D603

D604

D605D

606

D718

D719

D720

L207

C655

C654

C661 C660

C659

C658

C657

C656

D105

C772C773C770

C769

DLCE

119

FANPWM

P_CONT

JUST

SYNCAFT

GN

D

SDET2

GN

D

Y

GN

D

C

GN

D

V

GN

D

R

GN

D

L

GN

D

GN

DG

ND

FLP

ON

FLD

AT

AF

LST

BK

EY

1K

EY

2D

VD

FLD

C+

FL-28V

V+

5E

V+

13SW

FLC

LKN

CIRH

DD

GN

DFLD

C-

GN

D

AGC

VWV

V+6E

V+5M

V+5M

V+6SW

V+6E

V+13SW

V+13SW

V+9

XR

ES

ET

_IN

(WRITER)

(HDD)

CMKD-P3X

CMKD-P3X

VWV203520322029

20272028

Q506

Q403

Q402

Q507

Q508

Q509 Q510

Q513

Q516

Q203Q206

Q701

Q401

Q205Q204

Q105

Q515

Q512

Q704

Q710 Q707

Q709 Q706

Q705

Q103

Q102

Q505

Q408

Q409

Q410Q411

IC102

IC203

IC601

IC205

IC101

1

19

1

64

3

4 1

85

40

1

1 13

1

85

41

4 1

75

40

1

LF

LF

R

R

ATHB ASSYI

ATWB ASSYJ

SIDE B

CN705

CN

201

B F

18

1 2 3 4

1 2 3 4

C

D

F

A

B

E

DVR-520H-S

• The Setup is Necessary When : a) When the MAIN Assy is replaced b) When the JCKB Assy is replaced c) When the MAIN Assy and JCKB Assy are replaced Note : Make sure of setting the correct number.

• How to Setup the Model 1) After power on, the following screen is displayed on TV monitor. Press " 42 " by using the remote control unit for service(GGF1381).

2) After 1), the following screen is displayed on TV monitor. Press " 053 " by using the remote control unit for service.

6) Escape the Service Mode. Press [ESC]. 7) Download the latest firmware. At last, the download is necessary to update the firmware of each ASSY. Refer to "7.1.3 DOWNLOAD METHOD" of RRV2979 on page 82. Notes : 1) After the setting complete, you can NOT CLEAR the setting data. Make sure the pressing number. 2) " NG " is appeared on TV when unsuitable number is pressed. In such a case, please unplug the power cable and plug it again. Then restart the model setting.

The setting complete when OSD is disappeared. 3) Unplug the power cable. 4) Reset the recorder to all its factory settings. 1. Make sure that the recorder is on. 2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel. The recorder turns off with all settings reset. 5) Enter the Service Mode and then confirm the Model Name " DVR-520H/RLT ". 1. Make sure that the recorder is on. 2. Press [ESC] then [DISP] keys by using the remote control unit for Service.

[ Recorder 's Model Setting] Input the number by using the remote for Service.

> --

Input No. Model [ 42 : DVR-520H ] [ 44 : DVR-720H ]

[ Recorder 's Type Setting] Input the number by using the remote for Service.

> --- (Type -- , Region No. -)

Input No. Type [ 05 : RLT <Singapore> ] [ 06 : YPW <Australia> ]

DVR-520H/RLT VERSION : 4.∗ ∗

SYSCON : RELEASE_131Rev :1.5036 $

TUFLCON : 4.04 MASK OK DRIVE : DVD-RW DVR-107X OK

1.13W OK CKT0000353WL OK


C : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ FLASH : 64M

Note : For 720H types, press " 44 ".

4. MODEL SETTING

pioneer dvr 520 service manual

Documents

pcont c210

bidirectional

24ma bidirectional

bidirectional

output buffer

output buffer

video signal

bidirectional