pioneer dvr 3100 s
DESCRIPTION
service manualTRANSCRIPT
PIONEER CORPORATION 4-1, Meguro 1-chome,PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, LoPIONEER EUROPE NV Haven 1087, Keetberglaan 1, 912PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253
PIONEER CORPORATION 2003
DVR-3100-S
Meguro-ku, Tokyo 153-8654, Japanng Beach, CA 90801-1760, U.S.A.0 Melsele, BelgiumAlexandra Road, #04-01, Singapore 159936
ORDER NO.
RRV2843
DVD RECORDER
DVR-3100-STHIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Region No.Serial No.
Please confirm 3rd & 4th alphabetical letters.
DVR-3100-S WY AC220-240V 2 &&TT######$$
DVR-3100-S WYXU AC220-240V 2 &&PG######$$
DVR-3100-S WVXU AC220-240V 2 &&PG######$$
÷ When servicing this model, some service procedures may reset the settings that customer set (*) to the factory default settings. Make sure to explain this to the customer.
(*) : Initial Setup (Clock Setting, Remote Control Set, Channel settings, Video Out settings, Audio In settings, Audio Out settings, Language settings)
Refer to the chapter 12 of the Operating Instructions for more details.
For details, refer to "Important symbols for good services" .
T-ZZV OCT. 2003 printed in Japan
1 2 3 4
C
D
F
A
B
E
DVR-3100-S2
SAFETY INFORMATION
WARNING!DEVICE INCLUDES LASER DIODE WHICHEMITS INVISIBLE INFRARED RADIATIONWHICH IS DANGEROUS TO EYES. THERE ISA WARNING SIGN ACCORDING TO PICTURE1 INSIDE THE DEVICE CLOSE TO THE LASERDIODE.
LASERPicture 1Warning sign forlaser radiation
LASER DIODE CHARACTERISTICSMAXIMUM OUTPUT POWER : 50 mwWAVELENGTH : 658 nm
1. The ON/OFF(ON:low level,OFF:high level) status of theCLAMP signals for detecting the loading state are detectedby the drive CPUs, and the design prevents laser diodeoscillation when the CLAMP signal turns OFF.In normal operation, if no disc is clamped, the laser diodeoscillation is disabled.However, the interlock does not always operate in the testmode.
2. When the cover is opened, close viewing of the objectivelens with the naked eye will cause exposure to a Class 3Alaser beam.
Additional Laser Caution IMPORTANTTHIS PIONEER APPARATUS CONTAINSLASER OF CLASS 1.SERVICING OPERATION OF THE APPARATUSSHOULD BE DONE BY A SPECIALLYINSTRUCTED PERSON.
LABEL CHECK
DRW2179
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
[ Important symbols for good services ]In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.When you find the procedures bearing any of the symbols, be sure to fulfill them:
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable. In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,proper cleaning should be performed to restore their performances.
5. Lubricants, glues, and replacement partsAppropriately applying grease or glue can maintain the product performances. But improper lubrication or applying glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply theprescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed ones should be used.
4. Shipping mode and shipping screws
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set orthe shipping screws should be installed before shipping out in accordance with this manual, if necessary.
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.
35 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S4
CONTENTS SAFETY INFORMATION..................................................................................................................................... 21. SPECIFICATIONS ............................................................................................................................................ 52. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8
2.1 PACKING ................................................................................................................................................... 82.2 EXTERIOR............................................................................................................................................... 102.3 FRONT PANEL ........................................................................................................................................ 12
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM.......................................................................................... 143.1 BLOCK DIAGRAM ................................................................................................................................... 143.1.1 OVERALL BLOCK DIAGRAM............................................................................................................... 143.1.2 TUJB ASSY BLOCK DIAGRAM............................................................................................................ 163.1.3 MAIN ASSY BLOCK DIAGRAM............................................................................................................ 183.1.4 POWER BLOCK DIAGRAM.................................................................................................................. 203.2 ATAB ASSY and OVERALL WIRING DIAGRAM...................................................................................... 223.3 TUJB(1/3) ASSY ...................................................................................................................................... 243.4 TUJB ASSY(2/3) ...................................................................................................................................... 263.5 TUJB ASSY(3/3) ...................................................................................................................................... 283.6 FRJB and DVJB ASSYS .......................................................................................................................... 293.7 MAIN ASSY(1/5) ...................................................................................................................................... 303.8 MAIN ASSY(2/5) ...................................................................................................................................... 323.9 MAIN ASSY(3/5) ...................................................................................................................................... 343.10 MAIN ASSY(4/5) .................................................................................................................................... 363.11 MAIN ASSY(5/5) .................................................................................................................................... 383.12 MHLP ASSY .......................................................................................................................................... 403.13 FLKY ASSY ........................................................................................................................................... 423.14 SCRB ASSY .......................................................................................................................................... 443.15 POWER SUPPLY UNIT.......................................................................................................................... 463.16 WAVE FORMS ....................................................................................................................................... 47
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 504.1 ATAB ASSY.............................................................................................................................................. 504.2 TUMJ ASSY ............................................................................................................................................. 524.3 MAIN and MHLP ASYS ........................................................................................................................... 564.4 POWER SUPPLY UNIT............................................................................................................................ 604.5 FRJB and DVJB ASSYS .......................................................................................................................... 624.6 FLKY ASSY ............................................................................................................................................. 634.7 SCRB ASSY ............................................................................................................................................ 64
5. PCB PARTS LIST ........................................................................................................................................... 666. ADJUSTMENT ............................................................................................................................................... 71
6.1 TUJB ASSY ADJUSTMENT .................................................................................................................... 716.2 MAIN ASSY ADJUSTMENT .................................................................................................................... 72
7. GENERAL INFORMATION............................................................................................................................. 737.1 DIAGNOSIS ............................................................................................................................................. 737.1.1 CPRM ID NUMBER AND DATA SETTING............................................................................................ 737.1.2 SERVICE MODE................................................................................................................................... 757.1.3 DV DEBUG MODE................................................................................................................................ 837.1.4 ERROR RATE MEASUREMENT .......................................................................................................... 867.1.5 VIDEO ADJUSTMENT FOR SPECIFIC AREA..................................................................................... 887.1.6 SETUP SEQUENCE............................................................................................................................. 927.1.7 DISASSEMBLY ..................................................................................................................................... 937.2 IC ............................................................................................................................................................. 967.3 OUTLINE OF THE PRODUCT............................................................................................................... 1277.4 DISC/CONTENT FORMAT .................................................................................................................... 1307.5 CLEANING............................................................................................................................................. 132
8. PANEL FACILITIES ...................................................................................................................................... 133
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
1. SPECIFICATIONS
VHF (low)
VHF (high)
Hyper
UHF
VHF (low)
VHF (high)
Hyper
UHF
STEREO B/G - A2 I - NICAM L - NICAM B/G - NICAM D/K - NICAM
Channel
E2 - E4X - ZE5 - E12S1 - S20M1 - M10U1 - U10S21 - S41E21 - E69
Frequency
47 - 89 MHz
104 - 300 MHz
302 - 470 MHz470 - 862 MHz
Channel
A - CX - ZD - J11, 13S1 - S20
S21 - S41E21 - E69
Frequency
44 - 89 MHz
104 - 300 MHz
302 - 470 MHz470 - 862 MHz
PAL B/G PAL I
Channel
2 - 4
5 - 10B - Q
S21 - S4121 - 69
Frequency
49 - 65 MHz
104 - 300 MHz
300 - 470 MHz470 - 862 MHz
Channel
R1 - R5
R6 - R12S1 - S20
S21 - S41E21 - E69
Frequency
49 - 94 MHz
104 - 300 MHz
302 - 470 MHz470 - 862 MHz
SECAM L SECAM D/K
GeneralSystem...........................DVD-Video, DVD-R/RW,Video-CD,
CD, CD-R/RW (WMA, MP3, JPEG. CD-DA)Power requirements.............................220–240 V, 50/60 HzPower consumption.......................................................35 WPower consumption in standby mode..............0.7 W (FL off)Weight..........................................................................4.4 kgDimensions...........................420 (W) x 69 (H) x 341 (D) mmOperating temperature....................................+5°C to +35°COperating humidity..................5% to 85% (no condensation)TV system..............PAL/SECAM/NTSC (external input only)
RecordingRecording format................................DVD Video Recording
DVD-VIDEO
Recordable discsDVD-RW (DVD Re-recordable disc)DVD-R (DVD Recordable disc)
Video recording formatSampling frequency.................................................13.5MHzCompression format....................................................MPEGAudio recording formatSampling frequency.....................................................48kHzCompression format..................Dolby Digital or Linear PCM
(uncompressed)Recording timeFine (FINE).....................................................Approx. 1 hourStandard Play (SP).......................................Approx. 2 hoursLong Play (LP)..............................................Approx. 4 hoursExtended Play (EP).......................................Approx. 6 hoursManual Mode (MN)...................................Approx. 1–6 hours
TunerReceivable channels
TimerPrograms..............................................1 month/32 programsClock..............................Quartz lock (24-hour digital display)Power off memory.........Approx. 5 years (after manufacture)
Input/OutputVHF/UHF antenna input/output terminal...........VHF/UHF set
75 Ω (IEC connector)Video input......................................Input 1, 3 (rear), 2 (front)Input level.........................................................1 Vp-p (75 Ω)Jacks............................................. AV connector 2 (Input 1),
RCA jack (Input 2,3)Video output..........................................................Output 1,2Output level .....................................................1 Vp-p (75 Ω)Jacks...............................................AV connector (Output 1)
RCA jack (Output 2)S-Video input..................................Input 1, 3 (rear), 2 (front)Y (luminance) - Input level................................1 Vp-p (75 Ω)C (colour) - Input level...............................286 mVp-p (75 Ω)Jacks..............................................AV connector 2 (Input 1),
4 pin mini DIN (Input 2,3)S-Video output.......................................................Output 1,2Y (luminance) - Output level.............................1 Vp-p (75 Ω)C (colour) - Output level............................286 mVp-p (75 Ω)Jacks...........................................AV connector 1 (Output 1),
4 pin mini DIN (Output 2)Audio input...............................Input 1, 3 (rear), 2 (front) L/RInput levelDuring audio input......................................................2V rms
(Input impedance: more than 22 kΩ)Jacks..............................................AV connector 2 (Input 1),
RCA jacks (Inputs 2,3)
55 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S6
Accessories
• Remote control ×1(VXX2884 : WYXU/WY types)
(VXX2883 : WVXU type)
• RF antenna cable(PAL) ×1(VDE1075)
• Power cable ×1(ADG1154 : WYXU/WY types)
• Audio / Video cable(1.5m) ×1(red/white/yellow)(VDE1077)
• Dry cell batteries ×2(AA/R6P)
Audio output....................................................Output 1,2 L/RDuring audio output.....................................................2V rms
(Output impedance: less than 1.5 kΩ)Jacks............................................AV connector 1 (output 1),
RCA jacks (output 2)Control input.............................................................Mini jackDV input/output...............................................................4 pin
(i.LINK/IEEE 1394 standard)
AV Connectors (21-pin connector assignment)AV connector input/output...........................21-pin connectorThis connector provides the video and audio signals forconnection to a compatible colour TV or monitor.
PIN no.1........................................................................Audio 2/R out11.................................................................................G∗ out3........................................................................Audio 1/L out15.......................................................................R∗ or C∗ out4.....................................................................................GND17...................................................................................GND7...................................................................................B∗ out19.............................................................Video out or Y∗ out8...................................................................................Status21...................................................................................GND∗ : AV CONNECTOR 1(RGB)-TV is output
Supplied accessoriesRemote control.....................................................................1Dry cell batteries (AA/R6P)..................................................2Audio / Video cable (red/white/yellow).................................1RF antenna cable.................................................................1Power cable..........................................................................1Operating Instructions..........................................................1Warranty card.......................................................................1
Note: The specifications and design of this product are subject to change without notice, due to improvement.
(ADG1156 : WVXU type)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
75 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S8
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.Screws adjacent to mark on product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual.(In the case of no amount instructions, apply as you think it appropriate.)
NOTES:
for WYXU/WY types
for WVXU type
20
18
16
19
5
4
17
17
15
14
7
15
15
15
15
10
15
15
9
12 6
2
138
11
3
1
1
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
PACKING parts List
(2) CONTRAST TABLE DVR-3100-S/WY, WYXU and WVXU are constructed the same except for the following :
Mark No. Description Part No.
> 1 Power Cable See Contrast table(2)
2 Audio/Video Cable VDE1077
3 RF Antenna Cable VDE1075
4 Remote Control See Contrast table(2)
5 Battery Cover AZA7424
NSP 6 Dry Cell Batteries (R6P,AA) VEM1030
7 Operating Instructions See Contrast table(2)
(English)
8 Operating Instructions See Contrast table(2)
(French)
9 Operating Instructions See Contrast table(2)
(German)
10 Operating Instructions See Contrast table(2)
(Italian)
11 Operating Instructions See Contrast table(2)
(Dutch)
12 Operating Instructions See Contrast table(2)
(Spanish)
NSP 13 Warranty Card ARY7065
NSP 14 Cord Sheet See Contrast table(2)
15 Polyethylene Bag VHL1051
16 Mirror Sheet VHL1006
17 Accessory Case VHC1112
18 Front Pad See Contrast table(2)
19 Rear Pad See Contrast table(2)
20 Packing Case See Contrast table(2)
Mark No. Description Part No.
Mark No. Symbol and Description DVR-3100-S/WYDVR-3100-S/
WYXUDVR-3100-S/
WVXU
> 1 Power Cord ADG1154 ADG1154 ADG1156
4 Remote Control VXX2884 VXX2884 VXX2883
7 Operating Instructions VRB1316 VRB1316 VRB1318
(English)
8 Operating Instructions VRE1101 VRE1101 Not used
(French)
9 Operating Instructions VRE1103 VRE1103 Not used
(German)
10 Operating Instructions VRE1105 VRE1105 Not used
(Italian)
11 Operating Instructions VRE1107 VRE1107 Not used
(Dutch)
12 Operating Instructions VRE1109 VRE1109 Not used
(Spanish)
NSP 14 Cord Sheet Not used Not used VEG-012
18 Front Pad VHA1348 VHA1346 VHA1346
19 Rear Pad VHA1349 VHA1347 VHA1347
20 Packing Case VHG2445 VHG2417 VHG2416
95 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S10
2.2 EXTERIOR
K
C
N
M
G
A
F
N
E
FGC
H
A
H IJ
JI
K
M
B B
E
E
H
D
B
I
G
A
C
52
1
1649
49
36
49
49
49 38
49
49
18
31
31
48
48
22
22
15
11 10
8
6
37
52
3349
55
49
7
31
31
49
41
49
49
49
61
62
59
60
6158
49
49
13
12
49
4
49494949
49
49
49
49
42
44
43
57
45
43
49
349
35
4949
949
53
5456
23
26
2127
28 29
39
20
25
30
40 5
1917
14
34
24
49
4949
5150
50
50
32
2
49
50
2521
47
46
46
CONTACT SIDE
NON-CONTACT SIDE
Lithium Battery
Acetate Tape(Taping for No.14 FFC)
Refer to "2.3 FRONT PANEL".
31
Bond Lock process(Use GYA1011 or GYL1005)Paste the bond both to the aluminum tape and the side chassis of the DRIVE Assy.( part)The paste point is only this aluminum tape.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
EXTERIOR parts List
(2) CONTRAST TABLE DVR-3100-S/WY, WYXU and WVXU are constructed the same except for the following :
Mark No. Description Part No.
1 ATAB ASSY VWV1968
2 TUJB ASSY VWV1962
3 FRJB ASSY VWV1965
4 MAIN ASSY VWV1971
5 MHLP ASSY VWV1991
> 6 POWER SUPPLY UNIT VWR1374
7 DRIVE ASSY R6 VXX2898
8 DC FAN Motor VXM1109
9 DVJB ASSY VWV1967
10 Connector Assy PF08EE-D25
11 Connector Assy PF13PP-D25
12 Flexible Cable (32P) VDA1975
13 Flexible Cable (21P) VDA1976
14 Flexible Cable (40P) VDA1977
15 Flexible Cable (15P) VDA1980
16 Housing Assy (4P) VKP2313
17 Housing Assy (8P) VKP2314
18 Housing Assy (2P) VKP2315
19 Leg Assy AEC7113
NSP 20 PCB Holder PNW1706
NSP 21 P. Plate Holder PNY-405
22 Earth Plate VBK1148
23 Radiation Sheet VEB1360
24 Card Spacer VEC1708
NSP 25 Clamp VEC2362
26 Heatsink Cushion VEC2363
27 Gasket A VEC2382
28 Gasket B VEC2393
29 Gasket Sheet VEC2394
30 M Cushion A VEC2398
31 Aluminum tape VEF1056
32 Rear Panel See Contrast table(2)
33 Bonnet Case VXX2897
NSP 34 Base Chassis See Contrast table(2)
35 PCB Base VNE2278
NSP 36 Writer Stay R VNE2318
NSP 37 Writer Stay L VNE2319
NSP 38 HDD Stay VNE2320
NSP 39 Bonnet Angle VNE2321
NSP 40 Heatsink VNH1070
41 Cable Holder VNK5330
42 Pioneer Name Plate VAM1136
43 Tray Sheet A VEC2346
44 Tray Sheet B VEC2358
45 Tray Sheet C VEC2395
46 Tray Sheet D VEC2396
47 Tray Panel Assy VXA2602
48 Screw AMZ30P060FMC
49 Screw BBZ30P060FMC
50 Screw BPZ30P080FZK
51 Screw PPZ30P080FMC
52 Screw BCZ40P060FN
53 Flexible Cable (7P) VDA1979
NSP 54 DV Angle VNE2322
55 Bonnet Label See Contrast table(2)
56 Screw VBA1088
NSP 57 Front Panel Assy See Contrast table(2)
58 SCRB ASSY VWV1958
59 Flexible Cable(35P) VDA1982
60 Flexible Cable(15P) VDA1983
NSP 61 Spacer 40 PNW2488
62 Earth Plate VBK1149
Mark No. Description Part No.
Mark No. Symbol and Description DVR-3100-S/WYDVR-3100-S/
WYXUDVR-3100-S/
WVXU
32 Rear Panel VNA2674 VNA2610 VNA2610
NSP 34 Base Chassis VNB1040 VNB1039 VNB1039
55 Bonnet Label VRW1990 VRW1990 VRW1987
NSP 57 Front Panel Assy VXA2634 Not used Not used
(WYXU and WVXU types are individual parts.)
115 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S12
2.3 FRONT PANEL
F
16
15 20
18
11
1417
8
93
5
5
25
24 24
24
4
619
2
1
7
10
12
23
13
21
22
CONTACT SIDE
NON-CONTACT SIDE
11
DaifreeGEM1036
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
FRONT PANEL parts List
(2) CONTRAST TABLE DVR-3100-S/WY, WYXU and WVXU are constructed the same except for the following :
Mark No. Description Part No.
1 FLKY ASSY VWG2443
2 Flexible Cable (19P) VDA1974
3 Rubber Sheet AEB7054
4 Door Spring VBK1144
5 Rubber Foot VEB1349
6 Drive Sheet VEC2345
7 FL Lens VEC2352
8 Door Lens See Contrast table(2)
9 Jack Sheet VEC2381
10 FL Filter VEC2354
11 Jack Door VNK5309
12 JOG Dial S VNK5316
13 JOG Base VNK5317
14 Hologram Label VRW1962
15 Flont Panel Assy VXA2616
NSP 16 Front Panel VNK5361
17 Front Cover R VNK5360
18 Front Cover L VNK5358
19 Main Key S VNK5312
20 Power Key S VNK5313
21 Rec Key VNK5314
22 Stop Key S VNK5315
23 Function Cover VNK5318
24 Screw BPZ30P080FZK
25 DV Cover VNK5355
Mark No. Description Part No.
Mark No. Symbol and Description DVR-3100-S/WYDVR-3100-S/
WYXUDVR-3100-S/
WVXU
8 Door Lens VEC2377 VEC2377 VEC2376
135 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S14
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM3.1 BLOCK DIAGRAM3.1.1 OVERALL BLOCK DIAGRAM
SPDLMOTOR
LDDRIVE
Pickup
LOADINGMOTOR
STEPPIONGMOTOR
TV TUNER MODULEU3001 VXF1023ANT
INPUT3
VIDEO
Y/C
L
R
(15P)CN1301
(15P)
(35P)
CN3002
CN210(1/2) (35P)
CN203(1/2)
FRJBASSY
SCRBASSY(1/2)
TUJB ASSY(1/3)
TUJB ASSY(2/3)
D
CI 1/2
MAIN ASSY
DRIVE ASSYM
14 2
4
6
6
12
10
IFOUT
Y
LR/C
LL
C
V/YV/Y
V/Y
C
UVLSIFIN
LOUT
LIN2LIN1LIN3
L
V/Y
C
RF INRFOUT
V/Y
UVV
3V
3Y
1Y
2Y
3C
1C
2C
2V
C
Y/CompSelectorIC3301
LA73030
IC2801LC75342MIC4001 MSP3417G
IC3903 TDA9818TS
IC101(1/2)LA73026AV
13
5
11
14
12
32
34
24
36
1
3
15
17
19
5
7
9
LPF
1 ChipSysytem Codec
StereoDecoder
VIF/SIFIC
Audio Selector with Electirc ATT
2 27
16
12
JA1302
JA1301
VIN2
YIN2
CIN2
10LIN2
INPUT3
PICKUPASSY
Y
C
JA2832
VIDEO
Y/C
L
R
LIN3
VIN3
YIN3
M
(40P)
[ATAPI]
DV
D-V
RD
VD
-Vid
eo DVD-VRDVD-Video
CD Digital
CD Digital
CN4401
1
CN201(2P)
CN2009 (2P)
CN101(45P)
8
CIN3
CN501
CN502
(12P)
33
39
A
B
C
D
S4
S3
S2
S1
5
4
3
2
1/3B
2/3BPB DVD/CD
IC1001M65672WG
IC201UPD63620
IC501 M63028FP
IC101UPC3320GC
RF IC
IC301M30700FJLGP
IC202
SDRAM16Mbit
7-1013-16
(40P)CN401
(21P)(21P)
CN2008(1/2)
DSP
48
37
40
36
38
34
35
LPF
IC1401IC1421
ATA SDRAM256Mbit×2
CPU SDRAM128Mbit
IC1102 IC1101
Flash64Mbit
IC1103
SRAM4Mbit
2
8 8
WriterCPU
26
6CHDriver
2
IC203 DS90LV027ATM
LVDSDriver
2628
LPF
201
76CN3001(1/2)
1,2
23,24
PIFSAW
TrapSIF
SAW
11
AV
1(T
V)
AV
2(S
TB
)
31
15
9
55
39
21
27
23
28
33
36
JA101
JA102
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
F FLKYASSY
SCRB ASSY(2/2)
I 2/2
H
EMHLP ASSY
L
ControlData
IC1301
IC3201PCM1742KE
IC1001 PT6315
V1001
IC3101AK5381VT
IC3301AD1895AYRS
IC5101UPD72852AGB-8EU
IEEE1394Physical IC
IC5202UPD72893AGD-LML
IEEE1394Link IC
AudioA/D 2
SEL.L
VOUT
L
L
V/Y
V/Y
V/YV/Y
L
L
R/C
R/C
G
G
B
B
IC4001 Pin27IC3903 Pin16
(19P)CN2005
(19P)CN1001
DVJB ASSY
YOUT
COUT
LOUT
(32P)CN3001(1/2)
24SEL.V/Y
26SEL.C
C IN
V/Y IN
CN1302(7P)
CN5102(7P)
JA1303
(32P)
(30P) (30P)
(21P) (21P)
CN2001(2/2)
(32P)
CN3001(2/2)
CN2008(2/2)
38 39 37 36
1,3 2 6 7
XT
PA
TP
A
TP
B
XT
PB
XT
PB
TP
B
XT
PA
TP
A
1,3 2 6 7
1 2 3 4
AudioD/A Conv.
PLDALTERA
SCART Interface
MIX
FL Driver
FL KeySW
IC3501LA73054
Sampling RateConverter
7
C
Y
G
R
B
C OUT
Y OUT
G OUT
B OUT
C Y G B R L
TU_V
TU_L
R OUT
6
4
8
10
12
CN3001(2/2)
CN2CN
4702
6
4
8
10
12
29 27 25 19 17 13 5 3
L OUT16 16
SPDIF20 20
3
21
IC3251-1/2UPC4570G2
Y
C
V
Tuner U-com
JA3081
OPTICALAC-3/PCMDIGITALAUDIOOUT
LINEOUT 2
VIDEO
JA3551
JA101
JA102
YC
L
R
: Recording system signal route
• R ch is same as L ch.
: Playback system signal routeDV TERMINAL
(32P)CN2001(1/2)
24
28
26
48KHz 20Bit
TUJB ASSY(3/3)
3/3B
ENCSDRAM128Mbit
IC1201
IC1
PDY081A
DECSDRAM64Mbit
IC5204DV SDRAM
16Mbit
8
6
28
31
33
IC2001PD5947A8
TunerU-com
IC2251BR24L32F-W
EEPROM
IC2271RS5C372A
RealTimeClock
28
91012
1-3
F5D2
AE24AG25
AD21AF23
AG24
T26
V27
• MPEG2 PS Encode• AC-3/Linear PCM Audio Encode• 2ch ATA/ATAPI Interface• MPEG2 PS Decode• AC-3/MPEG1/Linear PCM Audio Decode
AV
1(T
V)
AV
2(S
TB
)
IC101(2/2)LA73026AV
25
26
30
42
7
18
23
28
2
16
33
36
IC1034
26
IC1144
26
IC1021 12
15 14132
IC1064
26
IC1074
26
IC11312 1314
IC1054
26
7 9 11 17 19 23 31 33
155 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S16
3.1.2 TUJB ASSY BLOCK DIAGRAM
U3001
V/U Tuner ModuleVXF 1023-
SCLSDA
SCLSDA
AFTAGC
<u-com>
TUON<u-com>+32VReg.
+6VSW.
+5VRipple Filter
IC3301LA73030
VideoSelector
IC3903TDA9818TS
VIF/SIFIC
EVOLCLKEVOLDATAEVOLCE
LC75342M
IC2801Audio SelectorwithElectric A.T.T
Audio Input Circuit
Output Circuit
Video Input Circuit
SDET2 <u-com>
IC3903 Pin16
SDET3 <u-com>
LAMUTERAMUTE<MAIN>
(Discrete)
R
L
Comp
C
Y
V
C
Y
CY
GBR
LR
TU_L
TU_CVBS
TU_R
Muting
OUT2
JA1301
JA1302
IN3(Rear)
IN2(Front)
JA2832
V
Y
Y
IF
AGC
AGC<u-com>
C
C
V
Y
C
S
S
L
R
L
R
L
R
JA3551
IC3501LA73054Video Driverwith LPF
<u-com>
SELV1SELV2SELV3
YVSELSWSTBY
<u-com>
R
L
V/Y
C
SYNC
LPF
Trap
PIFSAW
SIFSAW
LPF
Sync-Sepa
13.5MHzLPF
13.5MHzLPF
C
V/Y24
16
12
11
1,2
23,24
26
28
2
5
28
31
33
6
8
26
TUJB ASSY (VWV1962)B
FR
JB A
SS
Y (
VW
V19
65)
SCRB ASSY (2/2) (VWV1958)
C
I 2/2
CN
1301
CN
3002
CN210(2/2)
CN203(2/2)
886 10
610
214
124
JA3081OpticalOUT
12 4
13
11
3
1
1719
2729
25
23
25
33
531
35
1917
97
11
SCRB ASSY (1/2) (VWV1958)
I 1/2 CN203(1/2)
CN210(1/2)
29
215
27
7
1531
9
StereoDecoderMSP3417G
IC4001
<u-com>
SYNCAFT<u-com>
SYNCMAIN
SYNC<u-com>
SIF <IC3903:VIF/SIF IC>
SIF <IC4001:Pin2>
Q3344
Q3342
Q3362
Comparator
Q3371
Q4001-Q4004
AFCAGC
15kHz LPF
6.5MHzLPF
13.5MHzTrap
6.5MHzLPF
13.5MHzLPF
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
+6VSW
FL DriverPT6315
Front Keys
IR Detector
FAN Driver FAN
EEPROM Battery
CeramicResonator
EVOLCLKEVOLDATAEVOLCE
SPDIF
PCMOUT
PCMOUT
LAMUTE
RAMUTE
FLKY ASSY
(VWG2443)
FLPON
SELIR
BUP
BUP
JOGA, JOGB
KEY1, KEY2
KEY1_2
FLCLK, FLDATA, FLSTB
IC2001
CN
1001
CN
2005
Tuner/FL Control U-com
PD5947A8
XINTRA
SCL
XIN, XOUT
XRESETIN
SDA
Other Devices
SCLEEP
SDAEEPBR24L32F-W
IC2271Real-TimeClockRS5C372A
U-com I/F
Y
24
23
22
21
20
19
18
30
29
28
27
26
25
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
C
Y/G
Cb/B
Cr/R
R
L
SYNCMAIN
SELC
CN2008< from/to MAIN >
CN2009< from DRIVE >
SELV/Y
SELR
SELL
20
21
3
5
8
2
FSYNCAFT<Q3362>
PSAVEBS<Q3907>
IC1001
Q1001
Q2640
IC2251 BT2271
X2001
Reset ICPST3245
IC2521
IC1002
S1001-S1008
S1003
SR In
JOG
JA2201
FL Display
V1001
SYNC<IC3301>
LM/LDASH<IC3903>
TUON
FUNC
AVLO
ASCKSST to MSSM to THST to MHSM to TSYSXRESET
<Q3006,etc>
AVLIN
BLANK
XP_SAVE
AGC<U3001>
DCTR1<IC4001>
STBYQ<IC4001>
<IC2801>
SELV1SELV2SELV3SWSTBY
<IC3301>
SDET1SDET2SDET3
<JA1301, JA2832>
< to/from MAIN >CN3001
SC
AR
TC
ontr
ol
175 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S18
3.1.3 MAIN ASSY BLOCK DIAGRAM
To Writer
IC14
01A
TA S
DR
AM
CN
4401
ATA
BU
S
IC1102
FLASH
IC1103
IC1301ENC
SDRAM
MT48LC4M32B2TG-6
K4S
5616
32D
-TC
75
IC1201DEC
SDRAM
W986416DH-6
VYW2116 CY62148VLL-70ZI
ARCLK0
DCLK0
ECLK0
IC3201PCM1742KE
DAC
IC3101
A/DAK5381VT
AD
CC
LKO
IC34
03
AUDIO LR OUT
AUDIO LR IN
IC3251
CN
2001
CN
3001
CN1901
SE
RIA
L
MAIN ASSY(VWV1971)
D
IC1001
M65672WG
1 Chip System Codec
• MPEG2 PS Encode• AC-3/Linear PCM Audio Encode• 2ch ATA/ATAPI Interface• MPEG2 PS Decode• AC-3/MPEG1/Linear PCM Audio Decode
Backup SRAM
IC3001
Q2402,Q2403
Q2101-Q2105
IC2301,IC2331,Q2203Q2222
VIDEO Y,C,Yp,Cb,Cr OUT
VIDEO Y,C IN
TO TUNER u-COM
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
HOST BUS
DV
IC1101CPU SDRAM
IC5202
UPD72893AGD-LMLUPD72852AGB-8EU
LINK/DV CODEC
IC5101Phy
CN
5102
CN2
CN4702
IC5204DV SDRAM
K4S281632E-TC75 K4S161622D
MCLK
VCLKI
SCLK
HCLK0
IC33
01S
RC
SRC**O
SRC**I
IC4205
TC7WHU04FU
AD
1895
AY
RS
Play Mster clock
IC4206
AMCLK2
IC3402
PLL IC
27M
24
VMCLKI
AMCLK1
33M
36M
33/36M
X4102
VSS1195
VCXOInput Mster
clock
AD
MC
LKI 27M
IC4101
DV
PLL
CK
(AD
MC
LKI)
DV
VP
WM
IC4009
DVVCLKO
SM8707KV
IC1PDY081AALTERA
MHLP ASSY(VWV1991)E
Master Clock Free Run
195 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S20
3.1.4 POWER BLOCK DIAGRAM
LIVE
FLDC (–)
AC IN
F1T4A/250V
NEUTRAL
1
2
3
5
4
7
9
11
13
3
5
4
7
9
11
13
FLDC (+)
FL–28V
EV+37V
V+37E
EV+15V
EV+6V
SW+13
SW+12V1
4
1
SW+5V
SW+12V1
4SW+5V
DRIVE ASSYR6
DC FANMOTORCN1
CN204(4P)
CN203(4P)
CN201(13P)
SW+4V
V+
13F
AN
V+4SW
V+
4SW
V+2_4SW
V+
2_4S
W
CN2001(8P)
CN2006(2P)
CN2003(8P)
CN4001(8P)
2
3
5
7
2 4 6 8
2 4 6 8
2
3
5
7
V+6SW
V+
6SW
V+13SW
V+
13S
W
Q2640
Q2532Q2531
Q2621
SW+4V
SW+2.4V
SW+6V
CN202(8P)
CN2(30P)
16
17
18
19
16
17
18
19
CN4702(30P)
PO
WE
R S
UP
PLY
UN
ITG
FLKY ASSYF
TUJB ASSYB
MAIN ASSYD MHLP ASSYE
CN2004(13P)
V–28V
V+
13S
W
V+
6SW
V+
2_4S
W
V+
4SW
VEE 1
2
3
14
18
19
18
17
6
2
V+
5VO
V+
5VI
CN3001(32P)
CN2001(32P)
1
1
V+
5VO
CN2008(21P)
CN3001(21P)
1
1
V+
5VI
FLDC –
FLDC +
V+13SW (NC)
V+5EV+5E
CN1001(19P)
CN2005(19P)
V+15E V+6E V+13SW
IC25515V REG.
V+6E
V+5MV+5E
IC25413.3V REG.
V1001FL TUBE
IC1001FL Driver
V+6E
V+6SW
V+6E
V+3_3E
V+5VO
V+13V
V+4V
V+4V
V+6V
V+1R2V
V+5VO
V+12A
V+5VI
V+5RP
IC25819V REG.
V+13SW
V+9
1
1
6
3
1 3
30
IC400112V REG.
5 8
V+5A IC40045V REG.
5 1
V+6V
V+5D IC40065V REG.
5 1
V+3DIC40023.3V REG.
1 3
V+3D
V+2R5IC50022.5V REG.
7 1
V+1R2V
V+PRA
V+3D
V+3D
IC40081.2V REG.
1 3
V+4V
V+3VIC40073.3V REG.
5 4
V+3D
V+3D
V+3D
V+3D
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
215 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S22
3.2 ATAB ASSY and OVERALL WIRING DIAGRAM
MAIN ASSY(VWV1971)
D 1/5 - D 5/5DMHLP ASSY(VWV1991)
E
POWER SUPPLYUNIT(VWR1374)
G
TUJB ASSY (VWV1962)
B 1/3 - B 3/3BWHT
YEL
POWER CORD: ADG1154 for WYXU and WY types ADG1156 for WVXU type
DVJB ASSY(VWV1967)
H
SCRB ASSY(VWV1958)
I
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
A
FRJB ASSY(VWV1965)
CFLKY ASSY(VWG2443)
FATAB ASSY(VWV1968)
A
DR
IVE
AS
SY
R6
(VX
X28
98)
DISC NAVI POWER
CKS4052 VKN1805
JA3551 JA2832
JA30
81U30
01
DC FAN MOTOR: VXM1109
Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
OUTPUT X1VKB1184-
INPUT X1VKB1192-
235 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S24
3.3 TUJB(1/3) ASSY
CN2001
CN2004
JA2832
CN2006
CN2003
B 1/3
CN202G
CN
201
G
DC FANMOTOR
: S VIDEO SIGNAL ROUTE (Y)(Y)
(Y)
(Y)
: S VIDEO SIGNAL ROUTE (C)(C)
(C)
(C)
: VIDEO SIGNAL ROUTE
: AUDIO SIGNAL ROUTE (L ch)
CN
4001
D4/5
B 3/3
B 2/3
B 2/3
B 2/3
B 2/3
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
CN2005
JA2201
CN2007
CN211
Lithium Battery
EEPROM
RTC
TUFL U-com
B 1/3
B 1/3 TUJB ASSY (VWV1962)
: The power supply is shown with the marked box.
CN
1001
FC
N20
4I
255 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S26
3.4 TUJB ASSY(2/3)
LOGIC
LOGIC
R3913 is mounted on C3913.
CN3002
CN
1301
C
(Y)
(Y)
(C)
(Y)
(V)/(Y)
(C)
(AFT)
(AFT)
(SIF)
(SIF)
B 3/3
B 1/3
B 1/3
B 1/3
B 2/3
1
3 4
470
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
CN30
01CN2008
CN2009JA3081
JA3551
CN210
CN
203
I
B 2/3TUJB ASSY (VWV1962)
to DRIVE ASSY R6 CN9021
CN2001D 2/5
CN3001D 3/5
: S VIDEO SIGNAL ROUTE (Y)/(C)
(C)
(Y)
(G)
(G)
(Y)
(C)
(B)(B)
(B)
(R)(R)
(R)
(Y)
(Y)
(C)
(C)
(D)
(G)(Y
)
(C)
(C)
(G)
(V)/
(Y)
(D)
(C)
(B)
(R)
(V)/(Y)
(C)
: COMPONENT VIDEO SIGNAL ROUTE
(G)/(B)/(R)
: VIDEO SIGNAL ROUTE
(D)
: AUDIO SIGNAL ROUTE (L ch)
B 1/3
B 1/3
B 3/3B 1/3
B 1/3
B 2/3
79
5
6
8
10
11
19
16
1720
12
18
151413
275 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S28
3.5 TUJB ASSY(3/3)
Ste
reo
Dec
od
er IC
B 3/3B 3/3
B3/3
TU
JB A
SS
Y (
VW
V19
62)
B2/3
B 1/3B 1/3,2/3
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
3.6 FRJB and DVJB ASSYS
DV
Ter
min
al
CN
1301
JA13
01
JA13
02
FR
JB A
SS
Y (
VW
V19
65)
C
CN
3002
B2/3
Sw
itch
esS
1201
: S
tand
by O
nS
1202
: D
isc
Nav
igat
or
C H HC
: S V
IDE
O S
IGN
AL
RO
UT
E (
Y)
(Y)
(Y)
(Y)
: S V
IDE
O S
IGN
AL
RO
UT
E (
C)
(C)
(C)
(C)
: VID
EO
SIG
NA
L R
OU
TE
: AU
DIO
SIG
NA
L R
OU
TE
(L
ch)
CN
5102
D5/5
DVJB ASSY(VWV1967)
H
295 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S30
3.7 MAIN ASSY(1/5)
D 1/5
3/5D
4/5D
4/5D 5/5D5/5D
2/5D
2/5D
2/5D
3/5D3/5D4/5D 5/5D
(D)(D)
(AT
)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
D 1/5
D 1/5 MAIN ASSY(VWV1971)
2/5-5/5D4/5D4/5D
3/5D
5/5D3/5D
4/5, 5/5D
3/5, 4/5D
2/5D
: ATA DATA SIGNAL ROUTE(AT)
(D): AUDIO SIGNAL ROUTE (DIGITAL)
315 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S32
3.8 MAIN ASSY(2/5)
D 2/5
D 2/5 MAIN ASSY (VWV1971)
D 1/5
D 1/5
D 1/5
D 1/5
D 1/5
D 1/5
D 1/5
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
D 2/5
CN
3001
B2/2
D 1/5
D 3/5
D 3/5
D 3/5
D 1/5
D 1/5
D 1/5
17
15
10
13
12
11
16
9
8
: AUDIO SIGNAL ROUTE (L ch)
3
5
6
335 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S34
3.9 MAIN ASSY(3/5)
D 3/5
D 3/5 MAIN ASSY (VWV1971)
CN
2008
B2/2
D 1/5
D 2/5
D 2/5
D 3/5
D 4/5
D 1/5
D 1/5
D 4/5
D 1/5
14
18
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
(D)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
D 3/5
D 1/5
D 2/5
D 1/5
: AUDIO SIGNAL ROUTE (L ch)(D)
: AUDIO SIGNAL ROUTE (DIGITAL)
355 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S36
3.10 MAIN ASSY(4/5)
D 4/5
CN2003B 1/2
D 3/5
D 5/5D 1/5
D 1/5
D 5/5
D 1/5
D 3/5
D 3/5
1
2
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
D 4/5
D 4/5 MAIN ASSY (VWV1971)
CN12A
CN2E
CN2E
D 1/5
D 1/5
D 1/5
D 1/5
D 1/5
D 1/5
D 1/5
D 3/5
: ATA DATA SIGNAL ROUTE(AT)
(AT)
(AT)
: The power supply is shown with the marked box.
375 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S38
3.11 MAIN ASSY(5/5)
D 5/5
D 5/5 MAIN ASSY (VWV1971)
D 1/5D 1/5
CN
1302
H
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
D 5/5
D 1/5
D 4/5
D 1/5
D 4/5
D 1/5
D1/5
: The power supply is shown with the marked box.
395 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S40
3.12 MHLP ASSY
E
MHLP ASSY (VWV1991)E
CN4702D 4/5
CN4702D 4/5
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
E
: The power supply is shown with the marked box.
415 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S42
3.13 FLKY ASSY
F
CN
2005
B1/2
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
F
FLKY ASSY (VWG2443)F
SwitchesS1001 : RECS1002 : PLAYS1003 : SMART JOGS1004 : OPEN/CLOSES1005 : FUNCTIONS1006 : STOPS1007 : PAUSES1008 : REC STOP
435 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S44
3.14 SCRB ASSY
I
CN203
CN204
B 2/3CN210
B1/3
CN
211
(C)
(C)
(C)
(Y)
(Y)
(G)
(G)
(G)
(Y)
(B)
(B)
(B)
(R)
(C)/(R)
(R)
(R)
(R)
1
8 9
3
13
2
11
12
10
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
SCAR
T Co
nnec
tor
SCAR
T Co
nnec
tor
SCRB ASSY (VWV1958)I
I
JA101
JA102
: S VIDEO SIGNAL ROUTE(Y)/(C)
: COMPONENT VIDEO SIGNAL ROUTE
(G)/(B)/(R)
: VIDEO SIGNAL ROUTE
: AUDIO SIGNAL ROUTE (L ch)
SC
AR
T In
terf
ace
IC
(G)
(G)
(B)(B)
(R)
(R)
(B)
(G)(R)
17
1816
15
14
19
5
6
4
455 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S46
3.15 POWER SUPPLY UNIT
G G
CN
1C
N20
1
CN
203
CN
202
CN
204
LIV
E
NE
UT
RA
L
7 9 1 2 8 6 4 5 3 1 2 23 3411 12 10 13
EV
+37
V
EV
+18
V
PO
. ON
EV
+6V
FL.
ON
GN
DG
ND
GN
DG
ND
FL–
28V
FLD
C (
+)
SW
+13
SW
+12
VG
ND
GN
D
GN
DG
ND
GN
DG
ND
GN
DG
ND
SW
+5V
SW
+5V
SW
+6V
SW
+4V
SW
+4V
SW
+2.
4V
SW
+12
V
FLD
C (
–)
4 1 3 2 5 1 4 6 8 7
PO
WE
R S
UP
PLY
UN
IT (
VW
R13
74)
GAC IN
F1
(T4A
H 2
50V
)
C1
Z1
R1
L1L2
D12
D14
D13
D11
C51
Q71
R71
R70
R75
R73
R77
R72
R76
R74
T1
D71
C7
CN
901
C6
Q1
R19
R5
D7
D6
D17
Q22
Q23
Q2
Q21
R7
R6
R2
R30R
16C
10
D4
C73
C72
PC
1C
15R
33
C9
R8
R31
R12 D5
R11
R13D9
R17 D8
R10 C11
C52
BE
A51
BE
A1
Q51
R59
R55
Q91 R85
R24
PC
3
R79D
73R
78 Q72
R81
C60
D57
D54
R57
R55
R56
R62
D55
Q52 C59
R58
R61
R63
R59 P
C51 D50
R50
C51R67
D56
D50
1
D50
4
D40
1
R50
4
C50
1R
501
C60
1R
601
L501
C60
2C
502
NT
C1
D72
R9
D30 R90
C90C91
D10
1
D47
0
D30
1
C10
2
C47
1
C30
2
T51
C35
3
D35
1
C47
0C
101
R10
1 IC10
1
PC
51
R10
5C
110
VR
101
R10
2
R10
3
L101
P10
1
P20
1
D20
1
R10
6C
351
D30
2C
301
L470
L351
D80
1
D70
1
C80
1
C70
1
Q80
1
D80
2D
811
Q70
1
R80
1
C70
2Q
703
R70
4R
703
D70
3D
704
R40
4
R70
5
D70
7D
706
D70
8
Q40
2
R40
8
R40
7
IC40
3C
409
R41
3 C41
0
PC
1V
R40
1
D40
2C
401
R40
2R40
1R
403
L401
P40
1
R55
7
PC
3
R41
2
C41
1
R45
7
C40
3
Q45
1
R56
0Q
403
R41
1
R55
1
R55
2
R55
5
R55
6
R55
3
R55
4
C40
4
Q40
4
Q40
1
R43
4R
451
R45
2
R45
3
R45
4
R45
5
R45
6
R43
3
R43
2
R81
0
R81
1
C70
3
R71
0 C80
2
R43
5
R43
7
R43
6
C35
2P
403
P40
4
D20
2 C10
3
C40
6C
405
C20
1
P10
1 : A
EK
7050
(3A
)P
201,
P40
1, P
403,
P40
4 : A
EK
7067
(2A
)
CN2004To
DRIVE ASSYR6 CN9022B 1/2 CN2001B 1/2
• N
OT
E F
OR
FU
SE
RE
PLA
CE
ME
NT
FO
R C
ON
TIN
UE
D P
RO
TE
CT
ION
AG
AIN
ST
RIS
K O
F F
IRE
.R
EP
LAC
E W
ITH
SA
ME
TY
PE
AN
D R
AT
ING
S O
NLY
.C
AU
TIO
N -
CA
UT
ION
:F
OR
CO
NT
INU
ED
PR
OT
EC
TIO
N
AG
AIN
ST
RIS
K O
F F
IRE
.R
EP
LAC
E O
NLY
WIT
H S
AM
E T
YP
E
NO
. 491
003
FO
R P
101
MF
D, B
Y
LIT
TE
LFU
SE
INC
.
CA
UT
ION
:F
OR
CO
NT
INU
ED
PR
OT
EC
TIO
N
AG
AIN
ST
RIS
K O
F F
IRE
.R
EP
LAC
E O
NLY
WIT
H S
AM
E T
YP
E
NO
. 491
002
FO
R P
201,
P40
1, P
403
and
P40
4 M
FD
, BY
LIT
TE
LFU
SE
INC
.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
3.16 WAVE FORMS
Measurement condition ;No.1 to No.6 : 75% Color-barNo.7 to No.17 : 75% Color-bar, AXP disc 1-24No.18 : 1kHz, 2VrmsNo.19, No.20 : 1kHz, 2Vrms, AXP disc 1-1
TUJB ASSYB
1 UVIN jumper as same as C3306(UVIN) (Function : 1 ch)V: 500mV/div. H: 10µsec/div.
2 BSIN jumper as same as C3309(BSIN) (Function : BS9 ch)V: 500mV/div. H: 10µsec/div.
3 IC3301-pin 24 (Y) (Function : L1)V: 500mV/div. H: 10µsec/div.
4 IC3301-pin 26 (C) (Function : L1)V: 500mV/div. H: 10µsec/div.
5 CN3001-pin 24 (Y) (Function : L1)V: 500mV/div. H: 10µsec/div.
6 CN3001-pin 26 (C) (Function : L1)V: 500mV/div. H: 10µsec/div.
7 CN3001-pin 4 (Y) (Function : PLAY)V: 500mV/div. H: 10µsec/div.
8 CN3001-pin 6 (C) (Function : PLAY)V: 500mV/div. H: 10µsec/div.
9 CN3001-pin 8 (G)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
10 CN3001-pin 10 (B)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
12 Foot of C3511 + side (Y)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
13 CN210-pin25 (G)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
14 CN210-pin19 (B)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
15 CN210-pin17 (R)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
16 Foot of C3507 + side (CVBS)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
11 CN3001-pin 12 (R)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
17 Rear Jack Cout (C)(Function : PLAY)V: 500mV/div. H: 10µsec/div.
18 CN3001-pin 28 (Audio Lch)(Function : L1)V: 500mV/div. H: 200µsec/div.
19 CN3001-pin 16 (Audio Lch)(Function : PLAY)V: 2V/div. H: 200µsec/div.
20 Foot of C3552 + side (Audio Lch)(Function : PLAY)V: 2V/div. H: 200µsec/div.
21 L4 line (Audio Lch)(Function : 1ch)V: 1V/div. H: 200µsec/div.
GND
(Not terminated)
(75Ω termi- nated)
GND
GND
GND
GND
GND GND
GNDGND
GND
GND
GND
GND GND
GND
GND
GND
GND
GND
GND
GND
GND
Note : The encircled numbers denote measuring point in the schematic diagram.
475 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S48
MAIN ASSYD
1X4102 - pin 4 (ADMCLKI)V: 1V/div. H: 20nsec/div.(Function : P.ON)
2R4205 (VMCLK)V: 1V/div. H: 20nsec/div.(Function : P. ON)
3 Q2103 - B (G)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
5Q2104 - B (B)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
6Q2105 - B (R)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
8 CN2001-pin 10 (B Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
9 CN2001-pin 16 (Lch Out)V: 2V/div. H: 200µsec/div.(Function : PLAY)
10CN2001-pin 12 (R Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
11 CN2001-pin 4 (Y Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
12 CN2001-pin 6 (C Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
13 CN2001-pin 8 (G Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
14 CN3001-pin 8 (PCMAIN)V: 1V/div. H: 400nsec/div.(Function : PLAY)
15CN2001-pin 24 (SEL Y/V)V: 500mV/div. H: 10µsec/div.(Function : L1)
16 CN2001-pin 26 (SEL C)V: 500mV/div. H: 10µsec/div.(Function : L1)
17 CN2001-pin 28 (SEL L)V: 500mV/div. H: 200µsec/div.(Function : L1)
18 IC3402-pin 7 (27MCLK)V: 1V/div. H: 20nsec/div.(Function : P.ON)
GND
GND
GND
GND GND
GND
GNDGND
GND GND GND
GND GND
GNDGND GND
Measurement condition ;No.3 to No.8, No.10 to No.13 : 75% Color-bar, AXP disc 1-24No.15 ,No.16 : 75% Color-barNo.9, No.14 : 1kHz, 2Vrms, AXP disc 1-1No.17 : 1kHz, 2Vrms
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
SCRB ASSYI
1 CN203 - pin 5 (Y In)V: 500mV/div. H: 10µsec/div.(Function : AV2/L1)
2 CN203 - pin 21 (C In)V: 500mV/div. H: 10µsec/div.(Function : AV2/L1)
3 CN203 - pin 27 (Lch In)V: 1.0V/div. H: 200µsec/div.(Function : AV2/L1)
4 JA101 - pin 20 (Y In)V: 500mV/div. H: 10µsec/div.(Function : AV2/L1)
5 JA101 - pin 15 (C In)V: 500mV/div. H: 10µsec/div.(Function : AV2/L1)
6 JA101 - pin 6 (Lch In)V: 500mV/div. H: 10µsec/div.(Function : AV2/L1)
8 CN203-pin 9 (Y)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
9 CN203-pin 7 (C)V: 500V/div. H: 10µsec/div.(Function : PLAY)
10CN203-pin 11 (G)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
11 CN203-pin 17 (B)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
12 CN203-pin 19 (R)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
13 CN203-pin 23 (Lch)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
14 JA102-pin 19 (Y Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
19 JA102-pin 3 (Lch Out)V: 2.0V/div. H: 200µsec/div.(Function : PLAY)
15JA102-pin 15 (C Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
16 JA102-pin 11 (G Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
17 JA102-pin 7 (B Out)V: 500mV/div. H: 200µsec/div.(Function : PLAY)
18 JA102-pin 15 (R Out)V: 500mV/div. H: 10µsec/div.(Function : PLAY)
GND
GND
GND
GND
GND
GND
GND
GNDGND
GND GND
GND
GND
GND
GND
GND
GND
GND
Measurement condition ;No.8 to No.12, No.14 to No.18 : 75% Color-bar, AXP disc 1-24No.1, No.2, No.4, No.5 : 75% Color-barNo.13, No.19 : 1kHz, 2Vrms, AXP disc 1-1No.3, No.6 : 1kHz, 2Vrms
495 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S50
4. PCB CONNECTION DIAGRAM4.1 ATAB ASSY
1 401 40
R16
R17
R18
R14
R13R12
R11
R15
CN12
E119697VNP1937-A
VWV1968-ATAB
BOTTOM SIDE
CONTACT
1
240
391
2
39
40
CN11
2010
155
30
3525
SIDE A SIDE B
A A
CN4401
To DRIVE ASSY R6CN9003
D
CN12
CN11ATAB ASSYA ATAB ASSYA
(VNP1937-A) (VNP1937-A)
NOTE FOR PCB DIAGRAMS :1. Part numbers in PCB diagrams match those in the schematic diagrams.2. A comparison between the main parts of PCB and schematic diagrams is shown below.
3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram.4. View point of PCB diagrams.Symbol In PCB
DiagramsSymbol In SchematicDiagrams
Part Name
B C E
D
D
G
G
S
S
B C E
B C E
D G S
B C E B C E
B C E
Transistor
Transistorwith resistor
Field effecttransistor
Resistor array
3-terminalregulator
CapacitorConnector
P.C.Board Chip Part
SIDE A
SIDE B
1 2 3 4
C
D
F
A
B
E
5 6 7 8
DVR-3100-S 515 6 7 8
1 2 3 4
C
D
F
A
B
E
1
18
R3R335
C33
16
R33
48
R33
45
R33
44C
3345
C33
01
R33
43
C3554
C33
54
R33
49
R20
17
R36
43
DC
1
CTIONDUCTIVE HANCER,BIROWN TO TH
PARTS CONEAD IN SOL
CN
CF
DVR-3100-S52
4.2 TUMJ ASSY
88116
30 58
129
59
87
41
58
14
5 8
1
1 9
1
10
15
1
1 3
46
1 2
3 4
5
7 8
910
1213
14
15
1 15
12
14
1 7
8
18
1 2 13
+ -
C21
15
R2119
X2001
C2106
C2105
R2007
R20
04
C2104
C2103
C2102
R21
02
C2101
R21
01
R20
38
R21
18
IC20
01
C21
11
X22
71
IC2251
C22
51C
2622 C
2623C
2626
IC2351
R2357
C23
56
X2351
CN2006
C2642
R23
05
R2012
R2011
R23
03
KN2003
C25
34 C25
33
R23
61
C2254
C23
54
R2355Q2351
R9004R9005R9006
R90
07
R90
08
CN2007
C21
07
C21
08C21
09
R21
15
JA2201
R21
13
C23
55
C2357
R23
60C
2358
R23
59
R23
58
C2353
R23
54
C23
52
R23
52
R23
53
R23
51
C2351
R21
03
L264
2
C203
R23
56
R22
51R
2252
C22
53C
2252
R20
01R
2002
R20
03
R2005
R2013
R20
81
R20
84
R20
86R
2087
R20
85
R20
83
R20
79
R20
71
C21
19
R20
43
R20
66
R20
16
IC25
51
C2553
R2551
KN2007
R20
48
CN211
CN2009
C2544
IC2541
R23
09
R2311
L2301
R2317
R2315
R23
16C
2303
R2318C2302Q2306
C25
05
L334
2
R33
46
L334
1
R3342
Q33
41
C3346C
3341 C3343
C3344
C35
18
C35
17
C35
16
C35
11
C35
15
C35
07
C35
04
C3083
JA3081
C3552
C35
55
JA3551
C3364
R3561
Q3554
Q3556
CN3002
C33
56
JA3582
C3533
R2205
CN
3003
R21
08
C2204
R3597
C2140
R23
01
R20
58
C21
41
R2145
C21
42
R2146
R2059
R21
09
ST2271
R21
40
R3599
C2118
Q2640
C26
40
C2152C2153
C21
54
R20
57
L203
9
R20
78
IC2003
R21
10
R20
29
R20
80
Q3565
Q3564
R35
74
R35
73
C2082
R22
53
CN2001CN2004
C22
10
R2209
Q22
05R
2210
BT2271
R22
54
WARNING
AG
C2
TUJB ASSY FC PC
CONTACT UPPER SIDE
41
8 5
V+5E
V+3.3
SWV+6E
V+13SW
V+6SW
V+13SW
V+5VO
V+
5V
I
V+
6S
W
V+
5M
V+
5V
O
V+
5E
131
151
1 9
15 1
CMKD-P3X
8 1
58
129
59
87
88116
30
1
1
25249.6 - PROPOSITION 65HEALTH & SAFETY CODE SEDEFECTS OR OTHER REPROOF CALIFORNIA TO CAUSE CCHEMICALS WHITCH ARE KNAND CERTAIN ELECTRICAL THIS PRODUCT CONTAINS L
8
1
5
4
1 3
46
12
1 7
814
-+
SIDE A
B
IC2003
IC4001
IC2541IC2551
IC2351
IC2581
IC2251
IC2001
Q3452
Q2205
Q3451
Q3564
Q3565Q2640
Q4002
Q4001
Q4003
Q4004
Q3906
Q3004
Q3913
Q3099Q3916
Q3915
Q3556
Q3554
Q3006
Q3404
Q3407
Q3341
Q3342
Q3343
Q3344
Q2306
Q2351
CN3002
CN1301C
CN2004
CN201G
CN2001
CN202G
CN2007
DOWN LOAD
CN211
CN204ITUJB ASSYB
LithiumBattery
to SIDE B
1 2 3 4
5 6 7 8
C
D
F
A
B
E
1
15
009
L334
2
R3342C33C3343
C3344
C3552
A3551
64
ARNIN
F
V+5E
V+
5E
1
- PROPOSIT& SAFETY C
TS OR OTHERFORNIA TO CALS WHITCHRTAIN ELECODUCT CON
DVR-3100-S
128
1 2
3 4
5
6
7 8
910
11
1213
14
15 18
1
10
19
1 19
18
1 2 3
46
1
102030
35
1
32
111
1222
2333
34 44
R39
49
C2582
C2584
IC2581
C28
01
C28
03
C2813
C28
11
C28
07C
2812
C28
10
C28
04
C28
02
C28
06
CN2003
KN
2002
KN2001
JA2832
C2815
C28
14
CN2005
C28
17
C28
16
C2516
CN2008
C25
05
C25
06
R33
54 Q33
44
L334
4
L334
3
R3351
R3357 Q33
43
R33
52
R3350
C3353
C33
49
C33
47
C33
50
C33
51
C33
52 R33
55
C33
16
D33
04 D33
03C
3315
C33
14
C3310
D33
02
D33
01
C33
11C
3308
Q33
42
R33
48
L334
1
R33
45
R33
44
Q33
41
C33
07
46
C33
45C
3301
R33
43
C3029
C30
28
C3026
C3022
R30
23
C3015
C3013
C3006
C3009
C3001
U30
01
R34
42
Q34
07
R34
35R
3436
R34
32
R3423
C34
19
R34
24
R3420
Q3404
L340
3
C34
15
R34
21
R34
05
L340
1
C34
03C3554
R30
26
Q30
06
L300
5
C34
27
R33
04
C33
54
C33
55
L340
9
L340
7
L340
5
C39
35
C3936
C39
31
C3934
C39
29
Q39
15
R39
37
R3941
C39
32
C39
30
C3933
Q39
16R
3933 C3928
VR3902
F39
03
R39
09
VR3901
F3901
C39
04
L4002
Q30
99R
3099
R30
98
L309
8
C3099
C3201
R3908
R39
31
Q39
13
R3930 F3902
R3925
C33
57
F39
11
F39
12
R39
10
F39
04
R39
22R
3921
CN210
F39
06
R39
45
R39
44
C4033
CN3001
L309
9
R39
35R
3934
R3942
R3915
R33
56
R33
49
Q30
04
L390
9
L3910
L391
1
L3912
Q39
06
C3010
R202
Q4004
C4028R4019
C40
27R4018
R40
17
C4026
R4016C4023Q
4003
C40
22
R4014
R40
13
R4012
X40
01
R40
15C
4024
R40
11
C4016
C40
15
R40
10
C4014
C4013
C4012
C4011
C40
19
C4020
C40
17
Q4001R4008
R4006
R4007
Q40
02
C4009
C40
08
C4006
C4007C4004
C40
03
C40
10R
4003
C40
01
R40
05
IC40
01C4002
R3998
R30
05
C40
32
R10
00
D33
06
R3457
D33
05
R10
01
C3641
R20
17
Q34
51
R36
43
R36
42
C36
42
Q34
52 L3451
R3456
R3452
R34
53
R3454
R34
55CVBS2
G
AFT2
ARM2T
L`AFCAdjust
AGC
C DC
1C
1V
3V
Adjust AdjustAFC
19
1
33
34
1222
23
44
11
1
8 1E B C2
C B2 E2
V+
5V
I
V+5VO
V+15E V+5VI
V+
15
E
V+
5V
I
V+6EV+13SW
V+6SW
V+37E
V+
5T
U
351
2
211
34
1 19
ION 65ODE SECTION REPRODUCTIVE HARM.AUSE CANCER,BIRTH ARE KNOWN TO THE STATE
TRICAL PARTS CONTAINTAINS LEAD IN SOLDER
1
32
SIDE A
B
CN2003
CN4001D
CN210
CN203I
CN2008
CN3001D
CN3001
CN2001D
CN2005
CN1001F
(VNP1933-C)
535 6 7 8
1 2 3 4
C
D
F
A
B
E
R28
02
3302
R35
75
R
R33
73Q
3371
3582
R30
C35
62
R3375
L1-Y
R
CT
_to_
S
YT
_to_
S
V/Y
Sto
T
GT
_to_
S
EV+
VW
FL
DC
+G
ND
JO
GB
JO
GA
KE
Y2
IRK
EY
1K
EY
12
2Y
VW
1
DVR-3100-S54
1 15
1630
1 18
19361 12
1324
R39
56
R39
55R
3954
R39
53
R39
52 R3951
R3950R
3021
R30
20
C2581
C2583
R28
10
R28
04
C2808
IC28
01
C28
09
R28
08
R28
11
C2507C2508
Q30
03
L392
0
C39
22
C39
23
R2505
R28
06
R28
05
C28
05
R2812
R2813
R28
14
R2801R2803
R28
07R28
09
C28
20
C2819
C2818
C2821
R2815
R28
18
R28
17
R28
21
R28
19
R28
20
R28
16
C3312
C3313
C3306
C3305
C33
03
C33
02
R
IC33
01
C3017
C30
14
C3012
D30
02
C3005
Q30
01
Q34
10
R34
44
R34
43
R34
41R
3447
Q34
09
C34
31
Q3408
R34
40
C34
30
C34
26
R34
38
R34
45
C34
20
C34
25R
3433
R3430Q3406
C34
24
R34
28R
3426
R34
27
Q34
05C
3418
C34
11
R34
17
R34
18
Q3403
R34
15
R34
16
C34
14
R34
12
C34
12
C34
08
C34
10
R34
02
Q3402
R34
08
R34
06R
3403
R34
04
Q3401
C34
07
C34
06C
3405
R34
01
C34
01C
3404
R34
09 R33
41
Q3002
R30
14R
3013
R30
03
C3007 L300
3
C34
09
C34
13
C34
21
C34
32
R3018
R3019C30
21C
3020
R3303
R33
05
C33
17
C34
28
C34
22
C3416
C34
29
C34
23
C34
17
C39
24R
3926
R39
32
IC3903
R39
07Q
3904
R39
16
Q39
09
L390
3
R39
01
C3909
R39
04
C39
08
C39
07
R3929
C3905
Q3912
C39
21
L390
2
R3201C3202
R3202
D39
01
L3906L3
908
D39
02
C39
17
L390
7R39
24R
3918
R39
28
C39
25
C39
18
Q39
20
R39
23
R39
27
C39
20
L3957C3958
Q39
01R39
05
C3902
R39
20
R3911
L390
4
R39
12
R39
17
C39
16
C39
06
R3940
Q3914
L300
4
Q39
11
C39
10
R39
39
Q39
08Q
3905
Q39
17Q39
18
D30
01
C30
23
C39
03
R39
02
Q3902
R3903
R39
06
R39
46
R39
13
C39
12
C39
11
R
R39
36
L3913
R36
23
R28
22
R28
23
R39
43R
3948
Q39
03
C40
30
R40
23
R40
22
C40
29
R40
20
R40
21
C40
21C
4018
D40
01
R4009
R4004
R4001
C4031
R4024
L400
1
R4025
R9001
C39
19
R2504
R90
09
R39
99
C2825
C28
23
C28
24
C40
34
R3598
R34
58
C2822
R3957
C3901
R3958
Q4005
R39
59
R3002
Q34
53
L396
0
C39
60R3644
R3641
R34
51
C34
51
TU
AR
_T_t
o_S
TU
CV
BS
_T_t
o_S
AL_
T_t
o_S
1
CS
YN
C
BT
_to_
S
AG
C1
L3-R
ch
L1-R
ch L3-L
ch
L3-V
L1-L
ch
L1-V
L3-C
L3-Y
18151
36
YT
_to_
M
ALM_to_T
ARM_to_T
AF
T1
AGC2
SIF
CUBS1
SIF2
PIF
AFT2
SIF3
GS
_to_
T
L1-C
CT
_to_
M
TU_R
TU_L
IN
16
BS
_to_
T
RT
_to_
S
AR
_T_t
o_S
AR
_S_t
o_T
TU
AL_
T_t
o_S
19
ALM
_to_
T
ARM_to_TCr/RM_to_T
Cb/BY/G
M_t
o_T
CM_t
o_T
Y/VM
_to_
T
GN
D
ALT
_to_
M
ART_to_M SP
DIF
AS
CK
SY
S
HS
T_T
O_M
SS
T_T
O_M
SS
M_T
O_T
SY
SH
SM
_TO
_SY
SP
CM
OU
T
X52
5PM
RS
T
XR
ES
ET
RAMUTE
LAMUTE
BU
P V+5VI
SW+4V
SW+2.4V
SW+6V
SW+13V
EV+6V
EV+37E
30
13
12
24
1
V+
5V
OV
+5
VI
EV
+1
5E
1
32
V+
9
OUTF
L-2
8V
FL
DC
-
2L
2R
TU
_V
TUON
ST
BY
Q
RE
SE
TQ
35
302010
1
21 1
19
SIDE B
B
CN2003
CN210
CN2008CN3001 CN2005
TUJB ASSYB
IC3903
IC3081
IC3501
IC3301
IC2521
IC2801
IC2271
Q3453
Q2152
Q2151
Q4005
Q2641
Q202 Q201
Q3903
Q3902
Q3559 Q3562
Q3561Q3563
Q3551Q3371
Q3918Q3917
Q3905
Q3908
Q3911
Q3914
Q3901
Q3920Q3912
Q3909
Q3904
Q3363
Q3362
Q3002
Q3401
Q3402
Q3403
Q3405
Q3406
Q3408
Q3409
Q3410
Q3001
Q2305
Q2531
Q2621
Q2642
Q2532
Q3003
Q2203
Q2201
Q2202
Q2204
(VNP1933-C)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
C2821
2815
C3313
R33
05
AL_
T_t
o_S
L3-Y
L1-C
RT
_to_
S
AR
_T_t
o_S
V
35
N2005
DVR-3100-S
4
5 8
1
18
19
1 18
1936
1 3
46
R20
10
R2009
C2114
C2113
R2037R2036
R2033
R2032
R2031
R2077R2076
C202
C21
10
R22
08
C22
71IC22
71
C22
73
C22
74
R22
74D
2271
D22
72
R22
71R
2272
C26
21
C2624
C26
25
Q22
04
Q2202
Q22
01
Q2203
R22
04
R22
07
C21
12 R2206
C2641
C2511 C2512
C2515C2501
C35
32
C25
35Q25
32C
2532
R25
32 C2531
R2533R
2531
R26
45
Q26
42
C2510C2509
C2545
Q2621
R21
04
R21
06R
2107
R21
05
R2621
R28
02
R22
03
D22
01
C22
01
R22
01
C2202
R2202
D26
40
C201
Q25
31
R2501
R25
02
R25
03
R21
16
R21
17R
2014
R20
15
R20
82
R2025
R2024
R2023
IC2521C25
21
R25
21
C25
22
C25
52
C25
51
C2502
R20
1
C22
72
R22
75
C2543
C25
42
C25
41
R28
17
Q23
05
R2313
C23
01
R23
12
R23
14
C3312
C33
04
R3302
R33
01
R3551
D35
06
C35
19
D35
05
D35
04
C3514
C3520
C35
12
C35
13
D35
02 D35
03
C35
08
C35
10
C3506
C3505
R3504
R35
03IC3501C3503
R35
02
R35
89
R35
91
R35
87
R3083
R3082
R3084
C3084
R20
39
IC30
81
C3081
R30
81
R3563R3560
R3570
R35
65 R35
59
R35
75
D35
51
R3562
R35
58
C35
51R
3555
C3521
R3370
C33
65
R33
67
R33
68
C3362 R33
72
Q33
62Q33
63
R33
69
R30
04
R3576
C35
56
C3557 C3559
C35
58
R35
72
R218 R217
R33
73Q
3371
R33
74
Q35
51
Q3563Q3561
Q35
62
Q3559R3577
R3582 R35
69R35
68
R35
71
R3001 R33
08
R35
50
C35
31
C35
30
C3560
R90
03
D35
60
R21
50
D20
1
Q201Q202
R23
02
R21
44
C20
01
C35
62
C26
10
R21
41
R21
43
D26
41C
2211
C26
46
R3596R3598
R23
04
Q26
41
L264
1
R26
41
R26
42
R26
43R
2644
C26
43
C20
87
R3375
C35
61
C35
53
R90
02
C25
46
R23
06
R3085
R2147
Q21
51
C22
12
R21
48
Q21
52
R3002
R26
10
R33
76
C26
45
12
SD
A
V+
6E
EV
+15
AV
LIN
SR
AM
UT
E
8
15
GN
D
BT
_to_
S
L1-Y
C YYCV
R VL LR
SLA
MU
TE
CT
_to_
S
18
1
2Y
Cr
Y
Cb
GS
_to_
T
YT
_to_
S
AV
LO
V/Y
S_t
o_T
2C
19
181
36
C
EB
E2B2CC B2
C2E BB E
C
VWV1963VWV1962
VWV1978
GT
_to_
S
BLA
NK
BS
_to_
T
XP
_SA
VE
V+
5SM
FU
NC
XT
HR
OU
SC
LNC
P_C
ON
T
19
EV+15E
2V2R2LSD
ET
2
KE
Y1_
2
FLO
N
PO
N
FLD
C-
FLD
C+
GN
D
GN
D
FL-
28V
EV
+37
E
EV
+15
E
EV
+6V
GN
D
GN
D
GN
D
SW
+13
V
SW
+6V
SW
+2.
4V
SW
+4V
GN
D
1
10
GN
D
GN
D
GN
D
VWV1977
VWV
LF
FL
-28
VF
LD
C-
FL
DC
+G
ND
JO
GB
JO
GA
KE
Y2
IRK
EY
1K
EY
1_
2
PC
MO
UT
FL
CL
KF
LD
AT
A
V+
13
SW
FL
PO
N
GN
D
GN
D
V+
5E
GN
D
FL
ST
B
GN
D
V+5M
V+5M
SW
+1
3V
SW+13V
V+5SC
2C
2V2Y
2L
2R
AGC
GND
1
VWV
15
1
1
4
85
5
1
1
19
1
1
1 3
45
113
SIDE B
B
CN3002CN2004CN2001
CN2007CN211
from SIDE A
555 6 7 8
1 2 3 4
C
D
F
A
B
E
R5104
C5102
F51
R5107
R5106
R5105
TP10
R1
01
1
C1
01
6V
R1
00
1
T
R10
R1022
R10
041
TP1050
TP1051
TP1002
C1017
C1012
C1018
C1019
C1021
C1022
C1023
C1
02
4
2
71
R104582
71
R1043
TP1TP1028
TP1029
T
TP1024
C4
20
3
R4211R4212
1
R4208 209
C4207
IC42065
R
06
001
B
C
DVR-3100-S56
4.3 MAIN and MHLP ASYS
3016
151
CN2
VNP1953-AMHLPB
VWV1991-VWV1991- -U
1
21 30
15
D1
11
1
C1
06
1
C5111
5CN5102 C
51
01
C5
13
1
C5
13
5
C4033C4032 TP4015 01
L5
10
1
L5
10
2
IC4007
31
4
R5103
R5108
71
C5105
C5110
C4035
C5132
C5138
C5137
C5136 C4
03
4
L5103
L5104
L5106
L5105
26TP4305
C1
01
3
Q2
10
4
Q2
10
5
R1102 C2265
R2
10
9
R4
11
0
R4
10
9
1 4
R4
10
5
C1
01
1
R1071
R1
11
1R1052
R1
01
2
C1
11
4
C4
10
7 C4102
C4105
R4
10
8
R1
00
7
R1
00
1 C1
05
4
P1060
Q1102C4106
VR2104
X4
10
2
3229
C1104
R4106
R4107
R2
11
2
R211524
R1023 21R4104
R4103R4
10
2R4
10
1 R2
11
3
R2114R2116
R5
26
5
R2266
C4
10
3
C4
10
4
TP28
TP4708
TP4707TP4706TP4702
IC4
10
1
14 5
8
VR
21
05
VR
10
02
Q2
10
3
TP4701 TP4703TP4302
R2
10
7
CN
47
02
R2
10
2
R2
10
3
TP4705
Q2
10
2
Q2
10
1
R2106
R2105
C2246
C2
10
5
C2
10
6
R2252
TP4709
TP4711
TP4710
TP4718
TP4719R43061
7
28
R2111
C2
10
2
C2
10
3C2
10
4
TP4304TP4307
TP4704TP4712
TP4713
R4305
17
28
CN
43
01 8
2
71
R4304
82
71
R4303
TP4717
TP4716TP4715
TP4714
TP4303
TP4301
C2101
C2225
R1
90
5 R2306
1
82
71
R4302
82
71
R1048R1
08
0
C2221TP4306
027TP1032
TP1031 P1033
C4
20
6
Q2
31
1
Q2
22
2
R1902
C2222
R2233R2235
R4
20
2
R4206
R2311R1901
R1903
R1904
C2
31
7
3
C1
90
1 Q2312 R2239 R4207R2313
R2314 R2312
R2221
CN
19
01
4
C2
33
4
85 4
1
IC2
30
1
134
6IC
23
31
32
Q2402
TP50TP49
TP48
TP47
TP46
TP45
C2
40
5
Q2403
C2333
C2
31
1
C2305
C2
33
2
R2331
R2332R2333
R2411
R2
41
2
R2
40
6R2405
R2407
R2
40
9R24082404
C2
40
7
C2
31
9
C2
40
6
17
44
34
33 23
22
12
111
C1
C3
R3
CN
1
R2
R5
C2
C4
C6
C8
D1
C5
R4
IC1
C7R1
VWV1991- -U VWV1991-
GC
MK-
G3X
17
1 11
1222
2333
3444
Q2103Q2311
Q2222Q2312 IC42
IC2301 IC2331 Q2403 Q2402
SIDE A
SIDE A
SIDE B
D E
MAIN ASSYD
MHLP ASSYE
MHLP ASSYE
IC4007Q1102
IC4101
Q2105
Q2101 Q2102
Q2104
VR2104VR2105 VR1002
VR1
IC1
(VNP1953-A)
(VNP1953-A)
CN
1
CN
1901
CN
4301
CN5102
CN
4702
CN2
1 2 3 4
5 6 7 8
C
D
F
A
B
E
TP
8
C
Q2
10
5
R2
10
9
R1071
R1023
2114R211
R2
10
7
R2
10
3Q
21
01
R2105
C2
10
5C
21
03C
21
04
2
1
R1
08
0
1032
TP1031
C4
20
6
R4
20
2
Q2402
R2411
R2
40
6R2405
C2
40
7
Q21
Q2402
05
1 Q21
Q2
VR10
DVR-3100-S
R5104IC5101
C5111R5236
R5
12
1
R5
11
0
C5
10
1
TP34 TP368 2
7 1R5247
8 2
7 1R5249
8 2
7 1
R5
26
3
R5
26
2
R5
26
0
R5
12
0R
51
16
R5
12
2
R5
11
4
R5
25
3R
52
54
R5
25
6
R5
25
7
C5
21
0
C5121 C5122 C5124
C5
20
9
C5
21
2
C5
20
4
C5
20
6
C5
21
4
R5102
R5208TP35C5102
F5101
C5207
R5252
17
28
R5251
R5103
R510
R5107
R5106
R5105
1
208157
156X5101
33
32 1716
R5235
R5216
R5217
R5231
R5
10
9 R5125
R5128
R5
11
7
R5
11
5
R5126
R5129
R5232
R5214R5233
R5215
R5234
C5103
C5105
C5110
C5
11
2
C5127
C5
12
0
C5216 TP31
TP32
TP33 TP37
TP38
TP5202
TP5201
C5104
1 2
1TP1026 TP3303TP3301 R5292
R1
00
5
C5231 C5224C5229 R5298 R5297R4504
R1
07
4
53
R4
40
5
C5205
Q2
10
4
TP5204F
10
01
C5
21
8
R5283
R1
01
1
C1
04
1
C1
03
7
C1
03
4
C1
02
8
C1
02
7
C1
02
5
C1
01
6
R5
12
4
R5
12
3
R5286
C5
11
8
C5
11
9
C5
12
3
C5227VR
10
01
20
CN
46
01
R5272
R5130IC5202
6449
48 1
82
71
R5275
87
R5218
82
71
R5219
82
71
R5220 82
71
R522182
71
R5274
82
71
R5273
C1
01
4R5237
R5238
R5
13
2R
51
31
R5
11
2
R5
11
3
R5127R5276C5113
C5125
C5126
C5226
C5217
C5215C
10
54
TP1060
TP
51
06
1
R1024
R1022
R1021
105104
52
2121
R5290
82
71
R5289
82
71R
52
29
2 1
82
71R5
23
0
C1
05
0
C1
00
4C
10
03C
10
02
C1
00
1C
15
08
C1
50
9
R5280
R5281
R5228
R5224
R5288
R5225
R5278
R5279
C1
51
0
R5227
R4403R4402
R
R5277
R5287
R5282
R5313
R5314
C5228
F1
00
7
R1
00
3
R1
00
9
C1060
TP1041
TP1050
TP1051
VR
10
02
R1031
Q2
10
3
C5321
R1
00
4
C1006
C5
22
5
Q2
10
2
R4
40
7
1 2
R5
29
5
R5
29
6
R5
24
2
R5
24
0
R5
24
1
R5
24
3
R5
24
8
R2106R1034
C5
32
9
C5
21
3
C5
21
1
C5
20
8
R5284R5285
R5
24
4
R5
24
5
R5
24
6
R5
23
9
R5
26
1
TP1002 C1
04
2C1017
F1
00
5
R1
00
6 C10577 8 R5259
1 7
2 8R5258
1 7
2 8R5250
1 7
2 8R5255
1 7
2 8
7 8
R4
40
6
17
28
R2111
82
7
C5230 C5223C5222
C3307
R3307
R3
30
6R
33
05
R1066
R5293 R5294
C1005 C1051C1052C1012
C1044
C1045
C1018
C1019R3303C1055
C3
30
9
CN
44
01
7 8
R4
40
8
1
1528
IC3301
C1
05
6
C1
05
9
IC5204
82
71R4
43
6 40
39
D4401
C5221TP1013 TP3302
C2101
C1058
R1
00
8
F1
00
6
F1
00
4
C1021 C1048
C1047
R3310
R4435
R4432
R4429
R4428
R3
30
8 R4
42
7
C1022
C1023
C1
02
4
C1
02
6
C1
03
0
C1
02
9
C1
03
5
C1
03
8
C1
03
6
C1049
C1039
C3308
C4401
F1
00
3
F3
10
2
D3
10
2
D3
10
1
D3
10
4
D3
10
3
R4
00
1
C4
21
3
C4
21
2
C4
00
6
C4005
IC4008
R4
20
1
41
X4
20
1
1
F4
20
1
C4
20
1
C4
20
2
R4
01
7
C4
02
8
D4001
14
C4036
C3
40
3
R3
41
1
82
71R
45
08
82
71R
45
09
82
71R
45
07
2 1
8
7
R104882
71
R104582
71
R10438 5IC3403
23
VC4201
C3107
F3
40
1
F3
40
3
916
IC3402
C4
21
1
C3
40
4
C3
40
5C
34
07
C3302 C3303
C3108
C3
40
8
C1
05
3 C1
04
0
R3309
R2227 R3
40
5
R3
40
6
R3
40
7
R3
40
3
R3304
R4
50
5
R4440
R4
20
5
R5223
R5222
R3102
R3301 C3
30
1
TP3401
TP4202
TP1012
TP1027TP1028
TP1029TP1030TP
TP1033
TP1024
D4
20
2
R4
20
4
C3
10
5
C4
20
8
C4
20
3
F34025
C4014TP3402
TP3403
R3
41
0
R4206
R4
21
0
R4211R4212 R3409
R3107
R3106
R3108
R3105 R4531
R4530
C3
10
1
C3
40
6
C4
20
9
C3106
F4
00
4
8
IC3
10
1
89
4 1
L4
20
113
IC4
20
5
14
8 CN
45
01
R4
51
0
17
28
R3
40
8
L4202C3402
TP4201TP4008
R4015
F4
00
1
C4031
C4
01
8
C4027R4207 R4208 R4209
R3
10
3
R3
10
4
R4534R4537
C4
21
0
C4207
D4
20
1
F4
20
2
C3102
16 1
IC42064 5
IC4004
1 3
45
R4
53
8
17
28IC4207
L2
10
1
R4
21
3
40
39
1
CN2001
81
CN4001
IC4003 IC4005
21 1
CN3001
D4501
20
11 10
1
IC3001Q2001
Q3202Q3201D3001 D3002
TP44
TP43
TP42TP41
TP40
TP39
TP4001
TP4009
TP4003TP4002
TP4010
C4004
R4
01
4
R4010
R4
00
9
R3
00
2
R2
01
7
C4
01
0
C4
02
1
C4
02
4
C4023
C4013
R2
04
1
R2
04
2
R2
04
3
R2
04
4
R2
04
5
R2
04
6
R3
27
1R
32
70 R2019
R3022
R4541
R3
01
0
R3001
R3003
R3012
R2
41
2
R2
01
2
R2
01
1
R2
01
3
R2
01
5
R2
01
4
R3023
R3024
R3
20
2R
40
04
R4
00
8
R2404
R3025F
40
03
C3
00
4
C3002
C3
00
1
C2
40
6
03
IC4206
IC3001IC4207
IC4205
VC4201
IC3101
IC3301
IC3403
IC3402
IC4008
IC4004
Q3201
Q3202
IC4003
IC4005
Q2001
IC5204
SIDE A
D
(VNP1931-A)
02
104
02VR1001
IC5101 IC5202
CN2003B
CN4001
CN2008B
CN3001
CN3001B
CN2001
CN
12A
CN
4601
CN
4401
CN
4501
This PCB is six layer structure.
575 6 7 8
1 2 3 4
C
D
F
A
B
E
R1079 8
C1
50
6
C1
50
5
C1
50
4
P1063TP1
C1
20
2
TP1066
T TP2005TP2006
TP2020
DVR-3100-S58
C1
30
1
IC5203
1682
71
R1306
82
71
R1305
82
71
R1304
82
71
R1303
C5219
C5203
TP5203
TP1
TP5
TP2
TP6
TP3TP7
TP4
TP8 R5
20
7
R5291
R1421R1301
C5
22
0
IC1301
143
C1
30
2
C1
30
3
C1
30
4
C1
30
5
C1
30
7
C1
30
9
C1
31
0
C1
31
3
IC5
00
2
IC4006 C5006
R4
40
4 TP1017R1065TP4405
R1
42
5
TP4601
C5
31
0
C5
34
2
R5310
R5307
17C1421
C5341
82
71R
14
26
8 7
82
71R
14
24
82
71 R
14
23
82
71
R1310
82
71
TP4606
TP4607
TP4604TP4605
TP4602
TP4603
C5
31
1
C5308
C1422C1423
C1424
C1425
C1426
C1
30
6
C1
30
8C1
31
1
C1312
44 86
1 54
TP4608
R1
30
2
R5305
R5306
R5311
R5309
R5308
R5312
R5
30
4
C1
50
7
TP1049
TP1034
064
16 9IC5
30
1
5
4 3
1
R13071 7
2 8
R13081 7
2 8R1309
R4603
R5
34
2
R5
34
1
21 82
71
R4
40
1
2 1
TP4403
TP4401R5301 C5343
C1427
C1428
IC1
42
1
TP4609
R5
34
3
C5
30
9
C5301
L5
30
1
IC5341
1 8
R4430 R5330TP4419
C5
32
5
C1406
R5
32
7
R1
40
7R4426
R4425
R1032
D5322D5321
82
71
R4
41
6
82
71
R4
41
08
7
TP4402TP4404
TP4406
TP4407
TP4408
TP4409
TP4411
TP4412
TP4413
TP4414
TP4410
TP4416
TP4417TP4415
TP4418
R5321
C5
30
6
C5326
C5
32
7
C1
42
9
C1405
C1404
C1403
IC1001
27 28
1 54R1033
R5
32
3
R5326R5325
TP1016
TP101
C5322
C5307
IC5321
5 4
31 R1
40
41
7
28
R1
40
5
17
28
78
R4433
R4434R4431
R5
32
8
71
82
71R
14
08
82
71
R4
42
382
71
R4
41
7TP4421TP4422
TP4420
TP4424TP4425
TP4423
TP4427
TP4428
TP4429TP4430
TP4426
R5
32
2
R5209
C5
32
3
C5328
C4025
C1407
C1
40
8 IC1
40
1R1402
R4501
R5324
R5329
R5
26
4
C4019
TP5003 IC5
32
214 5
8C5324 L5321
51
R1
40
61
7
28 12
R3259TP4526
C3
25
8
C4
00
821
R4
51
8 2
IC3
20
1C4026TP4517TP4514
R3
26
2
R1
05
3 TP1014 R1
07
5
C1
40
1
F3201
54
82
71R
14
09
82
71 R1
41
0
82
71R
14
11
82
7
1
R4
51
2
82
7
1
R4
50
6
82
7
1
R4
50
2
82
71
R1050
82 8 2
7 1
8
7 1
3 4
C4002
161
8 5
C5008R
14
01
C5007
C4012
C4020
C1
40
9
C1
20
5
C1
20
7
C1402
27 28
C3
20
3
TP4512TP4511
TP4513
TP4507TP4506
TP4510
TP4509
TP4508
TP4502 TP4505
TP4504TP4503
TP4501
R1
20
2
R1
05
5
R3
26
3
R4503
TP1010
TP1011TP1015
TP5004
C3204
C5005
GND
R3264
R3255
R4527
R4528
IC4002R3254
R4011R4012
R3
26
6R
32
65
R3253
R3251
8
2
71
R4
52
5
8
2
7
1
R4
51
9
87 71R1049
R1206R1204
98
C4011
41 IC4001
C4
00
7
C3208C3207
54
IC1201
C3257
C3
20
5
C3
20
2
C3
25
3
C3254
TP4524
TP4525
TP4522TP4521
TP4523
TP4519TP4520
TP4516
TP4518
TP4515
TP3251
TP3253
TP4014R3268
R4535
R4536
R4532
R4533
C3206
C3201
C4029
TP3252TP4011 1 7
R3258
R3261
R3267R4013
R3269
C4015
C4003
TP4529
TP4530
TP4527TP4528
R4
01
6
R4
00
6
R3
25
2
R3
20
1
C4
03
0C4
50
1
C4017
C4016
C3006
C3003
C3252
C1
20
8
C1
20
6
C1
20
4
C1
20
3
1C3256
TP4004
TP4006
TP4013TP4012
R3257
R3256
R3260
R4529
C3255C3251
IC3251
C4009
IC3002
814F4
00
2
R120317
28
R120517
28
TP3013TP3007TP3002
TP3003 TP3005
TP3010TP3006
TP3001
TP3008
TP3009
TP3011TP3012
TP3004 TP2017 P2007TP2008
TP2009TP2010 TP2011TP2013
TP2012TP2014TP2015
C3
00
5
TP3014
TP2022
TP2023TP2024
TP2025 TP2021
TP2019
TP4005
TP4007
TP9
TP10
TP11TP12
TP13
TP14
R3
01
7
R3
01
5
R3
01
4
R3
01
1
R3
00
9
R3013
R3016
R3
01
9
R2026
C4022 C4001
SIDE B
D
MAIN ASSYD
IC5301
IC5203
IC5341
IC5321 IC5002
IC4006 IC4001 IC4002 IC3002 IC3251
IC3201IC1401
IC1421
IC1301
IC1001
IC1201
1 2 3 4
5 6 7 8
C
D
F
A
B
E6
1
C1
30
3
C1
30
4
7
86
1049
034
R13071 7
2 8
IC1001
2
1
C1
20
7
R120
R120517
28
008TP2009
TP2
T
IC1001
IC1
DVR-3100-S
R1
11
8
R1
11
3R
11
12
R1
10
8
R1
11
0
R1
10
9
TP23TP21
C1
51
2R
11
03
11
IC1103
64 3
1Q
11
01
TP5105
TP5103TP5104
TP5102
TP5101
R1
10
4
TP27TP26TP25
TP24
C5
13
4
C5
13
3
C1112
C5
10
6
C5
10
7
C5
10
8
C5
10
9
C5
11
7
C5
11
6
C5
11
5
C5
11
4
C1
10
8
R1
11
6
21
R1002
R1079
1 32
8 2
7 1R1026
82
71
R1
02
5C
15
11
TP22
R1078
R1015R1
01
6
R1017
R1
10
6R1
10
7
C1
50
1
C1
50
2
C1
50
7
C1
50
3
C1
50
6
C1
50
5
C1
50
4
TP1043
TP1044
TP1045
TP1046TP1047
TP1048
TP
TP1
TP1063TP1064
R1072
17
28
R1073
17
28
IC1
10
2
C1062
82
71
R1
07
7
82
71
R1
07
6
C1009
C1008
C1007
TP1040
TP1037
TP1052TP1053
TP1054TP1055
TP1056
TP1057
TP1058
TP1059
R1063TP1007R1060R1059
R1058
TP1003
C1
11
3
C1
10
5
C1111
C1
01
0
2728
R1057
R1056TP1001
TP1004TP1005
TP1008
TP1020
F1002
R1
06
9 17
28
R1
06
87 8
R1061R1062
21
C1110
C1109IC1
10
1R1064
R1105
TP1006
TP1009
TP1042
R1
05
41
7
28
C2
20
8
Q2302
R2
20
4 TP1907C2
20
5
TP1903
TP
10
36
TP
10
22
TP
10
61
82
71
R1
11
7
82
71
R1
11
5 82
71
R1
11
4
87
82
71 R
10
51
C1107
C1106
C1103
C1102
C1
20
2
154
R1
20
2
R1
07
0
R1
08
1
TP
10
35
TP
10
38
TP
10
19
TP
10
62
TP
10
65
TP1066
C1101
82
71
R104682
71R1044
82
71R1042
C2
30
1
TP1902
TP1901
TP1904TP1905
R1101
R1
20
1
C220928
IC1201
C2202
TP1906R
23
01
R2302
R2
20
3R
22
02
R2201
R2
20
5R2
20
7
R2
20
6
R2210
C2204
TP1039 TP1018TP1023
Q2201
Q2
20
2
C1
20
1
C1
20
9
C1
20
8
27 C2201C
22
06
C2306
R2303
R2304R2
30
5
R2307
R2
20
9
R2
20
8
R2
33
4
Q2301
Q2203
Q2204
C2
33
1
C2
30
8
TP2004TP2003TP2007
TP2002TP2001TP2005
TP2006TP2TP2016
TP2021
TP2020
TP2018
TP15
TP16TP17
TP18
TP19
TP20
R2
02
5
R2
04
0
SIDE B
D
(VNP1931-A)
IC1103 Q1101
201
Q2202
Q2203
Q2204
Q2201 IC1101
IC1102
Q2302 Q2301
This PCB is six layer structure.
595 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S60
4.4 POWER SUPPLY UNIT
SIDE A
G
POWER SUPPLY UNITG
AC IN
Q71 Q2 Q81 Q51Q52Q21 Q1 IC403
CN
1
LIVE
NEUTRAL
1 2 3 4
5 6 7 8
C
D
F
A
B
E
51IC4
DVR-3100-S
SIDE A
G
CN2004B
IC101 Q703 Q701 Q801 Q403
VR401 VR101
03
CN
201
CN2001B
CN
202
CN
203 To
DRIVE ASSY R6CN9022
615 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S62
4.5 FRJB and DVJB ASSYS
R1304
C1305
C1308
C1303
R1201
C1301
R1306
R1301
C1302
R1355
R1350
R1311
R1302
R1202
C1309
C1307
R1312
C1306
R1307 R
1308
C1304
R1303
D1304
D1301
R1309
R1305
D1302
D1303
R1310
GN
D
GN
D
V
Y
S_DET
KEY1_2 DISC NAVI
C
TP
A
R
Y
GN
D
CLch
GN
D C
L
S-Video
S_D
ET
Rch
POWER
Y
S_DET
HDD/DVD
S_DET
V
Video
KEY1_2
GND
TP
B
XT
PB
XT
PA
L
GN
D
15
1
1 7
LF
LF
11
5
1 7
1
2
3
4
12
34
5
6
7
1
23
4
W71
5
W707
S1202
CN
1301
CN1302
W70
9
W71
3
JA1303
W706
W71
2K
N13
03
W705
W71
0
JA1301
S1201
W70
4
KN1302
W71
4
JA1302 W703
W71
1
W708
W701
KN1301W702
GN
D
Con
tact
GN
D
V
S_DET Upp
er S
ide
L
HDD/DVD
VideoC
YKEY1_2
Y
VW
V19
67D
VJB
AS
SY
S-Video
KEY1_2
GN
D
DCFC
RchLchG
ND
V
C
S_DET
GN
D
L
Y
S_DET
POWER
S_D
ET
C
FRJB ASSYVWV1965
PC DISC NAVI
R
PYKC F4
PYKC F4
15
1
71
SIDE A SIDE A
SIDE B SIDE B
I I
DVJB ASSYH
DVJB ASSYH
FRJB ASSYC
FRJB ASSYC
CN5102D
(VNP1936-B)
(VNP1936-B) (VNP1936-B)
(VNP1936-B)
CN
1302
CN
1302
CN3002B
CN
1301
CN
1301
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
4.6 FLKY ASSY
21
LF
19 1
21
4941332791
C1003
R1502
R1030
R1006
R1501
Q1002
R1503
Q1001
R1029
C1001
Q1009
C1500
R1013
R1012
C1502R1011
R1101
C1017
R1504
R1010
C1007
C1019
R1009
R1008
C1008
R1016
R1032
R1004
IC1001
R1003
R1500
C1011
R1505
R1015
C1016
C1014
R1033
Q1007
R1001
GN
D
GN
D
JOG
A
IRFLS
TB
FLC
LKF
LDA
TA
FLP
ON
KE
Y1
KE
Y2
JOG
B
FLD
C+
FLD
C-
FL-28V
GN
D
KE
Y1_2
LED
HD
D
GN
D
V+
5V
D1102
C1002
C1006
R1005
C1018
R1002
R1014
C1009
Q1008
C1501
C1013
R1031
C1004
R1007
33
V+
5FL
V-28V
GN
D
GNDV
+5F
L
FLD
C-
V+
5FL
FLDC+
V+5FL
44
PYKC F4
23
34
V+5FL
12
22
V-28V
GN
D
GN
D
PY
KC
F4
11
LF
GND
1
1
GND
44
34
33
2322
12
11
1
12
1
19
21
49419 33271
S1004
S1001
W10
06
S1007C
1012
W10
30
W1016
CN
1002
W10
09
W1019
C10
15
W10
10
L100
2
W1023
W1017
W10
11W1004
S1008
S1003
W1003
C10
05
IC1002W
1008
W1022
W10
26
W10
13
W10
07
W10
12
W1018
CN1001
CN
1101
W1029
W1015W1014
S1005
D1101
L100
1
C10
10
V1001
S1006
KN1001
S1002
W1002
W10
05
PLAY
FC
REC STOP
V+
5FL
GND
PC
GN
D
REC
FUNCTION
V+5FL
VWG2433
FLD
C-
FLDC+
V+
5FL
OPEN/CLOSE
PAUSE
VWG2443
V+5FLGND
Contact upper side
STOP
LED
VWG2434
GN
DG
ND
VWG
VWG2432 VWG2444
GND
LEDB
V-2
8V
GND
FLKY ASSY
V-2
8V
21
1 3 2
1
19 1
21
91 32 35
SIDE A SIDE A
SIDE B SIDE B
F F
FLKY ASSYF
FLKY ASSYF
LEDB ASSY?
LEDB ASSY?
(VNP1934-A)
IC1001 Q1009 Q1007Q1002Q1001 Q1008
(VNP1934-A)
(VNP1934-A)
(VNP1934-A)
CN2005B
CN1001
CN1001
CN1002
CN1002
CN
1101
CN
1101
635 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S64
4.7 SCRB ASSY
15 6
10
1 643
1 643
1 643
4423
22 1
1
10
15
1
1020
30
35
1
8
4
5
D142
D144
D132
D130
R1019
R155
R1006
D139
D160
R278
R274
R270
R272R271
R273
R276
R275
R277
RY
101
R121
R151
R147
R225
R224
R207
R203
R202
R201
R200
R115
R107
R106
Q122
Q121
Q120
Q118
Q110
Q109
Q106
Q105
L103
JA101
IC107
IC106
IC103
IC101
D129
D128
D127
D126
D125
D124
D123
D122
D121
D120
D119
D118
D117
D116
D115
D114
D112
D111
D110
D109
D108
D107
D106
D105
D104
D103
D102
D101
CN
204
CN
203
C228
C227
C221
C220
C219
C218
C214
C212
C209
C208
C207
C204
C183
C182
C170
C169
C168
C167
C166
C165
C161
C160
C159
C158
C156
C155
C152
C151
C149
C146
C141
C140
C139
C138
C137
C136
C135
C134
C133
C132
C131
C128
C127
C126
C125
C124
C123
C121
C120
C119
C118
C117
C116
C115
C112
C111
C110
C107
C106
C105
C104
C103
C102
D134
JA102
D135
R290
R1008
D140
C402
D131
D133
R1055
R1005
R1004
R1003
R1047
D150
R141
C401
D147
R1036
D138
R1024
R1056
R1034
R289
D141R
1041
KN101
KN102
R1018
R1017
R1016
R1009
C303 C
188
R1045
R110
R1035
D148
D146
D145
R1058
D149
D136
D143
IC104C148
C147
D159
R1046D137
R160
R161
R162
R159
R288
R1043
R1039
R1029
R291
Q289
15.P_CONT14.BLANKIN
13.XTHROU12.COMPMUTE
to TV
29.AR_StoT
11.SNL_IN10.SNL_O
9.FUNC8.SCL7.SDA6.GND5.XP_SAVE
4.GND3.V+5SM2.EV+151.V+6E
1.SLAMUTE
13.G_StoT11.G_TtoS
9.Y_TtoS7.C_TtoS
5.V/Y_StoT3.SRAMUTE
27.AL_StoT25.AR_TtoS23.AL_TtoS21.R/C_StoT19.R_TtoS
35.TUAR_TtoS33.TUAL_TtoS
17.B_TtoS
15.B_StoT
18.GNDV17.GNDV
20.V-YIN19.V/Yout
16.BLANK15.R/Cout
6.LIN
7.Bout
13.GNDV
10.N-LINK
14.GNDV
12.NC
9.GNDV
11.Gout
8.FUNCTION
5.GNDV
3.Lout
4.GNDA
1.Rout2.RIN
21.GNDV
21.GNDV20.V-YIN19.V/Yout18.GNDV17.GNDV16.BLANK
6.LIN
13.GNDV
10.N-LINK
14.GNDV
3.Lout
7.BIN
12.NC
15.R/CIN
9.GNDV
2.RIN
11.GIN
8.FUNCTION
V+
5SC
1.Rout
GN
DA
GN
DV
V+
12SC
AV
1
from S
TB
4.GNDA
SC
RB
AS
SY
PY
KC
F4X
31.TUCVBS_TtoS
5.GNDV
AV
2
Contact S
ide
Contact S
ide
PC
FC DC
V+12SC
V+12SCV+5SC
1
EB
EC
2B
CC
B2
E2
35
4423
22 1
31 6
4
31 6
4
31 6
4
151
NP
NP
NP N
P
58
14
NP
SIDE A SIDE A
I I
SCRB ASSYI
CN210B
(VNP1935-B)
CN
203
CN211B
CN
204
IC10
4IC
101
IC10
3IC
106
IC10
7
Q28
9
Q10
5
Q10
6
Q10
9Q
110
Q11
8
Q12
0
Q12
1
Q12
2
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
34
16
81
916
3 4
1 6
169 8
1
1698
1
R1002
R10
01
D151
R117
D157
D184
R27
9
R280
R10
23
R281
R269
R26
8
R122
R123
R243
R242
R241
R24
0
R239
R238
R237
R236
R235
R234
R233
R148
R23
2
R231
R230
R229
R22
8
R227
R226
R146
R223
R222
R221
R220
R219
R145
R218
R144
R217
R21
6
R215
R21
4
R143
R21
3
R212
R208
R140R139
R205
R204
R136
R135
R132
R164
R131
R130
R126
R125R124
R116
R114
R109
R108
R105R104
R101
Q123
Q119
Q104
Q102
Q101
IC114
IC11
3
IC105
IC10
2
D182
D181
D113
C226
C225
C224
C22
3
C222
C217
C215
C213
C206
C205
C203
C20
1
C200
C199
C181
C180
C164
C162
C157
C154
C153
C150
C14
5
C144
C14
3C
142
C130
C129
C11
4
C113
C109
R15
2R
153
D188
R10
07
D154
R156
R15
8
R282
D155
D156
R314
R31
3
R312
R311
R31
0
R309
R308
R30
7
C171
Q309
Q308Q307
IC30
1
D307
C309
C308
R157
C307
C301
D158
R31
5R
1025
Q115
D187
D152
C23
1
C232
D153
R15
4
R10
31
R10
32
C283
D185
D186
R10
33
C229
C230
Q124
R119
R112
R283
Q28
1
GNDV
BLANK
RIN
Lout
GNDV
Rou
t
LIN
V/Yout
V-YIN GNDV
RoutR
ING
ND
A
Lout
15.P_CONT
13.XTHROU
11.SNL_IN
9.FUNC
7.SDA
14.BLANKIN
12.COMPMUTE
10.SNL_O
8.SCL
5.XP_SAVE
6.GND
R/CIN
GNDV
GNDV
GNDV
BIN
LINGNDV
GNDA
N-LINK GNDV
FUNC
GIN
NC
Bout
4.GND
FUNC
N-LINK
Gout
NC
GNDV
3.V+5SM2.EV+15
GNDV
V-YIN
GNDV
V/Y
out
GNDVBLANK
GNDV
R/Cout
GNDV
AV
2fr
om S
TB
C
7.C_TtoS
E
9.Y_TtoS
B
GN
DA
GN
DV
1.SLAMUTE
V+
5SC
V+
12S
C
11.G_TtoS
29.AR_StoT31.TUCVBS_TtoS33.TUAL_TtoS35.TUAR_TtoS
23.AL_TtoS25.AR_TtoS27.AL_StoT
13.G_StoT15.B_StoT17.B_TtoS19.R_TtoS21.R/C_StoT
to T
V
3.SRAMUTE 5.V/Y_StoT
1.V+6E
AV
1
EB
C2E2
B2
CVW
V19
58-
V+
12S
C
V+
5SC
V+12SC
V+
5SC
V+
5SC
LF21
20
2
1
16
34 9 8116
1 6
3 4
116
89
15
10
1
35
3020
10
1
20
21
2
1
1
16
98
NP
SIDE B SIDE B
I I
SCRB ASSYI
(VNP1935-B)
CN
203
CN
204
IC30
1
IC10
2
IC10
5
IC11
3
IC11
4
Q28
1Q
124
Q11
5
Q30
7
Q30
8Q
309
Q10
1
Q10
2
Q10
4
Q11
9
Q12
3
655 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S66
5. PCB PARTS LIST Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.The mark found on some component parts indicates the importance of the safety factor of the part.Therefore, when replacing, be sure to use parts of identical designation.When ordering resistors, first convert resistance values into code form as shown in the following examples.Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%).
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5 6 14 7 3
R 5 01 R 0
5 6 2 1
NOTES:
560 Ω47k Ω0.5 Ω1 Ω
RD1/4PU JRD1/4PU JRN2H KRS1P K
56 x 10 1
47 x 10 3
R501R0
561473
5.62k Ω RN1/4PC F562 x 10 1 5621
Mark No. Description Part No.
LIST OF ASSEMBLIES 1..ATAB ASSY VWV1968 1..TUJB ASSY VWV1962 NSP 1..FJDB ASSY VWM2206 2..FRJB ASSY VWV1965 2..DVJB ASSY VWV1967 1..MAIN ASSY VWV1971 2..MHLP ASSY VWV1991 1..FLKB ASSY VWM2212 2..FLKY ASSY VWG2443 > 1..POWER SUPPLY UNIT VWR1374 1..SCRB ASSY VWV1958
Mark No. Description Part No.
AATAB ASSYOTHERS
CN12 CONECTOR CKS4052CN11 40P ATA CONECTOR VKN1805
BTUJB ASSYSEMICONDUCTORS
IC2551 BA05FPIC2251 BR24L32F-WIC3301 LA73030IC3501 LA73054IC2801 LC75342M
IC4001 MSP3417GIC2581 NJM78M09FAIC2001 PD5947A8IC2541 PQ1K333M2ZPIC2521 PST3245
IC2271 RS5C372AIC2003 TC74HCT7007AFIC2351 TC7WU04FUIC3903 TDA9818TSQ3002, Q3342, Q3344, Q3363, Q3371 2SA1576A
Q3402, Q3404, Q3406, Q3408, Q3410 2SA1576AQ3452, Q3909, Q4001-Q4004 2SA1576A
Q2640 2SB1238XQ2532, Q2621 2SC2411KQ2203, Q2205, Q2351, Q2641, Q3001 2SC4081
Q3453, Q3901, Q3902, Q3904, Q3905 2SC4081Q3915, Q3916 2SC4081Q3912, Q3920 2SC4082Q4005 2SD1664Q2202 2SD2114K
Q2151, Q2201, Q2305, Q3559, Q3562 DTA124EUAQ3903, Q3906 DTA124EUAQ2204, Q2642, Q3451 DTC124EUAQ3362 HN1B04FUQ2306 HN1C01FU
Q3554, Q3556 HN1C03FUQ2152 RN1901Q3914 RN1903Q201, Q202, Q3004, Q3561, Q3563 RN4903Q2531, Q3006, Q3099 UMF21N
D2640 1SR154-400D2271 1SS352D201-D203, D2201, D3001, D3551 1SS355D3560, D4001 1SS355D3901 1SS356
D3301-D3304 DA204KD2272 RB501V-40D3002 UDZS33B
COILS AND FILTERSL3005 RADIAL INDUCTOR ATH1109L3341, L3343 LAU180JL3401, L3403, L3405, LL3407, L3409 LAU220JL3451 LAU2R2JL2301 LAU470J
L3957 LCKAWR22J2520L3960 LCKAWR47J2520L2641, L3342, L3344 LCYA100J2520L3903, L3909, L3912 LCYA150J2520L3911 LCYA4R7J2520
L3910 LCYA8R2J2520L3907, L3920 LCYAR68J2520L2642 INDUCTOR LTA102JF3902 SAW FILTER VTF1177F3901 SAW FILTER VTF1179
F3912 IF TRAP FILTER VTF1180F3911 IF TRAP FILTER VTF1181F3903 TRAP FILTER VTF1183L2039, L2359, L3018, L3019 VTL1081
Mark No. Description Part No.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
CHIP BEADL3003, L3004, L3099, L3902 VTL1096 CHIP BEAD
L4002 VCO COIL VTL1164
CAPACITORSC3356, C3357 CCSRCH100D50C2118, C2119, C2545, C2546 CCSRCH101J50C2818-C2820, C3362, C3365 CCSRCH101J50C2141, C2142, C2822, C2823, C4016 CCSRCH102J50C4022, C4023, C4028 CCSRCH102J50
C3932 CCSRCH121J50C3917 CCSRCH150J50C3345, C3352, C3404, C3410, C3416 CCSRCH180J50C3422, C3428 CCSRCH180J50C3935 CCSRCH181J50
C2357, C2358, C4029, C4030 CCSRCH220J50C2645 CCSRCH221J50C3343, C3350, C3960 CCSRCH270J50C2301, C3020, C3021 CCSRCH330J50C3405, C3412, C3417, C3423, C3429 CCSRCH390J50
C2101, C2105, C2106, C2201, C3933 CCSRCH470J50C3561, C3562 CCSRCH471J50C4017, C4019 CCSRCH560J50C2354 CCSRCH561J50C3905, C4018 CCSRCH5R0C50
C3344, C3351, C3451, C3936 CCSRCH680J50C3901, C4021 CCSRCH6R0D50C3341, C3347 CCSRCH8R0D50C2273 CCSRCH4R0C50C2353, C2801, C2802, C2810-C2817 CEAT100M50
C3001, C3364, C3641, C3642, C4007 CEAT100M50C4012 CEAT100M50C203, C2111, C2254, C2533, C2534 CEAT101M10C2544, C2553, C2622, C2623, C2626 CEAT101M10C3083, C3301, C3310, C3349, C3403 CEAT101M10
C3504, C3518, C4011, C4013 CEAT101M10C4032, C4033 CEAT101M10C2582, C2584, C2642, C2804, C2807 CEAT101M16C3555, C3928, C4002, C4004 CEAT101M16C3013, C3507, C3511 CEAT102M6R3
C3552, C3554 CEAT220M25C3533 CEAT221M16C3201 CEAT330M25C4009 CEAT3R3M50C2640 CEAT471M16
C3010, C3904 CEAT471M6R3C3911, C3912 CKSQYB225K10C3918, C3920, C3921, C3923, C3925 CKSRYB102K50C2104, C2355, C2821, C3317, C3902 CKSRYB103K50C3906, C3907, C3930, C4010, C4024 CKSRYB103K50
C2102, C2103, C3302, C3305-C3308 CKSRYB104K16C3311, C3314-C3316, C3505, C3508 CKSRYB104K16C3909 CKSRYB104K16C3012, C3023, C3908, C3916 CKSRYB222K50C3924 CKSRYB224K10
C4015, C4027 CKSRYB472K50C2112, C2140, C2202, C2204, C2210 CKSRYF104Z25C2251, C2302, C2303, C2351, C2352 CKSRYF104Z25C2356, C2521, C2522, C2531, C2532 CKSRYF104Z25
Mark No. Description Part No.C2535, C2541-C2543, C2551, C2552 CKSRYF104Z25
C2581, C2583, C2621, C2624, C2625 CKSRYF104Z25C2641, C2643, C2646, C2808, C2809 CKSRYF104Z25C3017, C3084, C3304, C3312, C3313 CKSRYF104Z25C3346, C3353, C3407, C3415, C3419 CKSRYF104Z25C3425, C3431, C3503, C3506, C3514 CKSRYF104Z25
C3519, C3521, C3530-C3532, C3551 CKSRYF104Z25C3903, C3910, C3929, C3931, C3934 CKSRYF104Z25C4001, C4003, C4006, C4008, C4014 CKSRYF104Z25C4020, C4026, C4031, C4034 CKSRYF104Z25C3005 CKSRYF104Z50
C2110, C2113-C2115, C2152, C2154 CKSRYF105Z10
RESISTORSR4001, R4004 RS1/10S0R0JR4009 RS1/10S100JR3098 RS1/10S150JR3346, R3349, R3352, R3356 RS1/16S5600FR3406, R3418, R3428, R3438, R3443 RS1/16S6800F
R2815, R2817, R2818, R3303-R3305 RS1/16S75R0FR3451, R3568, R3569, R3571 RS1/16S75R0FVR3901 (10K) VCP1156Other Resistors RS1/16S###J
OTHERSU3001 TV TUNER MODULE VXF1023X2271 (32kHz) VSS1143X2351 (4.433619MHz) VSS1176X2001 (10MHz) VSS1188X4001 (18.432MHz) VSS1189
CN2006, CN2009 KR CONNECTOR B2B-PH-KCN3003 2P TOP POST B2P-SHF-1AACN2003 KR CONNECTOR B8B-PH-KCN211 15P FFC CONNECTOR HLEM15S-1CN2005 19P FFC CONNECTOR HLEM19S-1
CN210 35P FFC CONNECTOR HLEM35S-1CN2007 9P FFC CONNECTORE HLEM9S-1JA3081 OPTICAL LINK OUT JFJ1001JA2201 REMOTE CONTROL JACK RKN1004CN2004 KR CONNECTOR S13B-PH-K
CN2001 8P SIDE POST S8B-EH0 PCB BINDER VEF1040BT2271 LITHIUM BATTERY VEM1034JA2832 JACK VKB1192JA3551 JACK VKB1193
CN2008 21P FFC CONNECTOR VKN1252CN3001 32P FFC CONNECTOR VKN1263CN3002 15P FFC CONNECTOR VKN1275ST2271 BATTERY SOCKET VKX10152007 SCREW PLATE VNE1948
KN2001-KN2003 VNF1084 WRAPPING TERMINAL
CFRJB ASSYSEMICONDUCTORS
D1301-D1304 UDZS5.6B
SWITCHES AND RELAYSS1201, S1202 VSG1009
Mark No. Description Part No.
675 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S68
CAPACITORSC1308, C1309 CCSRCH471J50
RESISTORSOther Resistors RS1/16S###J
OTHERSJA1302 3P JACK VKB1189JA1301 Y/C CONNECTOR VKB1190CN1301 15P FFC CONNECTOR VKN1275KN1301-KN1303 VNF1084 WRAPPING TERMINAL
DMAIN ASSYSEMICONDUCTORS
IC3301 AD1895AYRSIC3101 AK5381VTIC2301 BA7655AFIC1103 CY62148VLL-70ZIIC5204 K4S161622D-TC80
IC1101 K4S281632E-TC75IC1401 K4S561632D-TC75IC1001 M65672WG-CIC2331 MM1508XNIC5002 MM1562FF
IC1301 MT48LC4M32B2TG-6IC4001 NJM2370R12IC4004, IC4006 NJM2872F05
> IC4007 NJM2880U1-33IC4206, IC5301, IC5321 NJU7013F
IC3201 PCM1742KEIC4008 PQ012FZ01ZPIC4002 PQ070XZ02ZPIC4003 PST3428UIC4005 PST3809U
IC3402 SM8707KVIC4101 SN74AHC2G53HDCTIC3001 TC74LCX541FTIC3002 TC74VHC14FTIC5341 TC74VHC157FT
IC3403, IC4205, IC5322 TC7WHU04FUIC3251 UPC4570G2IC5101 UPD72852AGB-8EUIC5202 UPD72893AGD-LMLIC1102 VYW2116
IC1201 W986416DH-6Q2101-Q2105, Q2201, Q2203, Q2301 2SA1576AQ2312 2SA1576AQ2202, Q2222 2SC4081Q2302, Q2311 DTC114EUA
Q2402, Q2403 HN1B04FUQ1101 HN1K03FUQ3201, Q3202 RN1903Q1102 RN4982Q2001 UMF21N
D3001, D3002, D3101-D3104 1SS355D5321 HVC359D5322 HVC362D4201 MA2ZV05D1111, D4001 RB521S-30
Mark No. Description Part No.COILS AND FILTERS
F3102, F3401-F3403, F4004, F4201 DTF1069F5101 CHIP BEAD DTF1069L5301, L5321 LCYA100J2520L4202 LCYA1R2J2520F3201 CHIP SOLID INDUCTOR VTF1096
L5101, L5102 CHOKE COIL VTH1043L2101 CHIP COIL VTL1067L4201 CHIP BEAD VTL1079L5103-L5106 VTL1082
CAPACITORSC5311, C5329 CCSRCH100D50C3253, C3258 CCSRCH101J50C5105 CCSRCH271J50C5325, C5327 CCSRCH330J50C3207 CCSRCH331J50
C4208 CCSRCH390J50C5131-C5138 CCSRCH4R0C50C5326 CCSRCH5R0C50C3254, C3257 CCSRCH681J50C5121, C5122 CCSRCH8R0D50
C2208, C2317, C4002, C4034, C5203 CEVW100M16C5322 CEVW100M16C3251, C3255, C4001, C4004, C4029 CEVW101M16C2101, C2221, C2331, C2405, C2501 CEVW101M6R3C3201, C3204, C3206, C3301, C3309 CEVW101M6R3
C2301, C5102 CEVW220M6R3C1054, C1055, C1057, C1058 CEVW221M4C1060, C1061, C4022 CEVW221M4C3106 CEVW2R2M50C5321 CEVW470M16
C2308, C3102, C3107, C4003, C5205 CEVW470M6R3C5207, C5221, C5341 CEVW470M6R3C5301 CEVW4R7M35C2204, C2334, C4206, C5309 CKSQYB105K10C1901, C4014, C4019, C4033, C4036 CKSQYB225K10
C5006 CKSQYB225K10C1501-C1507 CKSQYB475K6R3C1004, C1012, C1014, C1029, C1034 CKSRYB102K50C1040, C1044, C1049, C1051 CKSRYB102K50C1110-C1112, C1207, C1208, C1307 CKSRYB102K50
C1311, C1313, C1407, C1408, C3303 CKSRYB102K50C3307, C3408 CKSRYB102K50C1003, C1027, C1037, C1052, C1109 CKSRYB103K50C1206, C1305, C1308, C1310, C1406 CKSRYB103K50C2305, C3003, C3004, C4018, C4020 CKSRYB103K50
C4207, C5214, C5222, C5224 CKSRYB103K50C1508-C1510, C2225, C2311, C4104 CKSRYB104K16C5306 CKSRYB104K16C4103 CKSRYB223K50C5328 CKSRYB473K25
C2202 CKSRYB563K16C1002, C1005, C1007-C1010, C1016 CKSRYF104Z25C1018, C1019, C1021-C1023 CKSRYF104Z25C1025, C1026, C1028, C1030, C1035 CKSRYF104Z25C1038, C1041, C1042, C1047, C1102 CKSRYF104Z25
C1105, C1106, C1108, C1114, C1202 CKSRYF104Z25C1204, C1302, C1304, C1312, C1402 CKSRYF104Z25C1404, C2102-C2106, C2201, C2206 CKSRYF104Z25C2222, C2306, C2319, C2332 CKSRYF104Z25
Mark No. Description Part No.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
C2406, C2407, C2502-C2506, C3001 CKSRYF104Z25
C3006, C3101, C3105, C3108 CKSRYF104Z25C3202, C3203, C3205, C3252, C3256 CKSRYF104Z25C3302, C3308, C4006-C4008, C4010 CKSRYF104Z25C4012, C4013, C4017, C4021 CKSRYF104Z25C4024-C4026, C4032, C4035, C4107 CKSRYF104Z25
C4202, C4203, C4209, C5101, C5103 CKSRYF104Z25C5111-C5113, C5118-C5120 CKSRYF104Z25C5123-C5127, C5204, C5206 CKSRYF104Z25C5208-C5213, C5215-C5218 CKSRYF104Z25C5225-C5230, C5308, C5310, C5323 CKSRYF104Z25
C5342, C5343 CKSRYF104Z25C1001, C1006, C1011, C1013, C1017 CKSRYF105Z10C1024, C1036, C1039, C1045, C1048 CKSRYF105Z10C1050, C1053, C1103, C1107, C1113 CKSRYF105Z10C1203, C1205, C1209, C1303, C1306 CKSRYF105Z10
C1309, C1403, C1405, C1409, C2507 CKSRYF105Z10C3404-C3407, C4027, C4028 CKSRYF105Z10C4030, C4031, C4105, C4201, C4401 CKSRYF105Z10C4501, C5110, C5231 CKSRYF105Z10C1056, C1059, C1062, C1101, C1104 CKSYF106Z10
C1201, C1301, C1401, C3402, C3403 CKSYF106Z10C4015 CKSYF106Z10VC4201 (10pF) VCM1012
RESISTORSR1025, R1026, R1042-R1046 RAB4CQ103JR1048-R1051, R1054, R1068, R1069 RAB4CQ103JR1072, R1073, R5218-R5221 RAB4CQ103JR5229, R5230, R5247, R5249-R5252 RAB4CQ103JR5255, R5258, R5259, R5273-R5275 RAB4CQ103J
R5289, R5290 RAB4CQ103JR1408-R1411, R4302-R4306 RAB4CQ220JR4401, R4404, R4410, R4416, R4417 RAB4CQ223JR4423, R4502, R4506, R4512 RAB4CQ223JR4518, R4519, R4525 RAB4CQ223J
R1114-R1117, R4405-R4408, R4436 RAB4CQ330JR1303-R1310, R1404-R1407 RAB4CQ560JR1203-R1206 RAB4CQ680JR5103 RN1/16SE5101DR5108 RN1/16SE9101D
R1001-R1009, R1101, R1102, R1201 RS1/10S0R0JR1301, R1401, R2017, RS1/10S0R0JR3002, R3102, R3201, R3252, R3301 RS1/10S0R0JR3303, R4001, R4006, R4009, R4014 RS1/10S0R0JR4016, R4108, R4109, R5102 RS1/10S0R0J
R5207-R5209, R5292, R5322 RS1/10S0R0JR5321 RS1/10S101JR4013 RS1/16S1001FR3254, R3266 RS1/16S1002FR3253, R3265 RS1/16S1201F
R4011 RS1/16S1501FR4012 RS1/16S1800FR1021, R1023 RS1/16S2201FR3251, R3269 RS1/16S2202FR2105, R2106, R2111, R2112, R2115 RS1/16S3300F
R5104-R5107 RS1/16S56R0DOther Resistors RS1/16S###J
Mark No. Description Part No.OTHERS
CN4001 PH CONNECTOR S8B-PH-SM3CN1901 7P FFC CONNECTOR VKN1299CN2501, CN5102 7P FFC CONNECTOR VKN1411CN3001 21P FFC CONNECTOR VKN1425CN4301 29P FFC CONNECTOR VKN1433
CN2001 32P FFC CONNECTOR VKN1436CN4401 40P FFC CONNECTOR VKN1794KN3 EARTH METAL FITTING VNF1109X4201 (27.000MHz) VSS1146X5101 (24.576MHz) VSS1184
X4102 (27MHz) VCXO VSS1195
EMHLP ASSYSEMICONDUCTORS
IC1 PDY081AD1 RB521S-30
CAPACITORSC1 CEVW101M6R3C2-C6 CKSRYF104Z25C7 CKSRYF105Z10
RESISTORSR3 RAB4C0R0JR2 RAB4C102JR1 RS1/16S0R0JOther Resistors RS1/10S###J
OTHERSCN1 7P FFC CONNECTOR VKN1411CN2 B TO B CONNECTOR 30P VKN1571
FFLKY ASSYSEMICONDUCTORS
IC1001 PT6315
COILS AND FILTERSL1001 LAU220J
SWITCHES AND RELAYSS1001, S1002, S1004-S1008 VSG1009S1003 VSX1004
CAPACITORSC1012 CEJQ101M6R3C1010 CEJQ220M35C1015 CEJQ470M16C1001-C1004, C1006-C1009, C1011 CKSRYB103K50C1013, C1016 CKSRYB103K50
RESISTORSOther Resistors RS1/16S###J
OTHERSCN1001 19P FFC CONNECTOR 9607S-19FIC1002 REMOTE RECEIVER UNIT RPM7140-H4V1001 FL TUBE VAW1081 RUBBER SPACER VEB13571001 FL HOLDER VNF1120
Mark No. Description Part No.
695 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S70
GPOWER SUPPLY UNITOTHERS> P101 PROTECTOR(3A) AEK7050> P201, P401, P403, P404 AEK7067
PROTECTOR(2A)
HDVJB ASSYOTHERS
JA1303 DV-TERMINAL VKB1186CN1302 7P FFC CONNECTOR VKN1238
ISCRB ASSYSEMICONDUCTORS
IC104 BA4558F-HTIC113 BU4052BCFIC101 LA73026AVIC114 MM1503XNIC103, IC106, IC107 MM1506XN
IC105 MM1511XNIC102, IC301 TC74HC4053AFQ101, Q120-Q122, Q124 2SA1576AQ118 2SC1740SQ104, Q307-Q309 2SC4081
Q109, Q110 DTA124EUAQ115, Q123 DTC124EUAQ105, Q106 HN1C03FUQ281, Q289 RN2903Q102, Q119 RN4903
D113-D117, D130-D133, D181 1SS355D184, D187, D188, D307 1SS355D134 RB501V-40D182 UDZS12BD101-D112, D118-D121 UDZS5.6B
D123-D127, D129, D135-D150 UDZS5.6BD185, D186 UDZS5.6B
COILS AND FILTERSL103 LCYA220J2520
SWITCHES AND RELAYSRY101 VSR1017
CAPACITORSC142-C145 CCSRCH102J50C225, C226 CCSRCH220J50C307, C308 CCSRCH221J50C113, C114, C127-C130 CCSRCH471J50C203-C206 CCSRCH471J50
C115, C116, C227, C228 CEANP100M16C158, C159, C165, C166 CEAT100M50C168, C169, C212, C219-C221 CEAT100M50C156, C161, C182 CEAT101M10C103-C105, C147, C209, C214 CEAT101M16
C218 CEAT101M16C151, C152, C160, C167, C170 CEAT102M6R3C138 CEAT1R0M50C102, C117, C118, C123-C126 CEAT220M25C139-C141, C149 CEAT220M25
Mark No. Description Part No.C207, C208 CKSQYB105K16C110 CKSQYF105Z16C121, C146, C150, C153, C162 CKSRYB103K50C222-C224 CKSRYB105K10C109, C135-C137, C148 CKSRYF104Z25
C154, C155, C157, C164, C180 CKSRYF104Z25C200, C201, C213, C217, C301 CKSRYF104Z25C303, C309, C401, C402 CKSRYF104Z25C111, C112 CKSRYF105Z10
RESISTORSR121, R126, R140, R143-R148 RS1/16S75R0FR151, R207 RS1/16S75R0FOther Resistors RS1/16S###J
OTHERSCN204 15P FFC CONNECTOR HLEM15S-1CN203 35P FFC CONNECTOR HLEM35S-1JA101, JA102 SCART CONNECTOR VKB1157101, 102 SCREW PLATE VNE1948
Mark No. Description Part No.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
6. ADJUSTMENT6.1 TUJB ASSY ADJUSTMENT
The solder land named "AFT2" (upper side)
Q3901-Emitter
CN3003 Pin1(AGC)
1.90V ± 0.20V Note1
3.80V ± 0.20V 2
Terrestrial tuner input /through output.Any channel, RF Input ≥ 60dBuSystem = B/G, I or D/KManual Adjust (in GUI of Manual Ch Setting) = ONNote1
Terrestrial tuner input Ch = E9(203.25MHz), Video= Blackburst RF Input = 60.0 ± 1.0dBuSystem = B/G, I or D/K
Note 1 : The adjustment spec. is defined without the thermal drift after the power on. Therefore, start the adjustment at least 10 minutes after the power on.
No. Adjustment Name Adj. Point Measurement Point Adjustment Value Adjustment State
1
VCO freerun frequency (AFC voltage) adjustment
AGC start point adjustment
L4002
VR3901
* It is not necessary to adjust the ASSY normaly when exchanging the ASSY. But the adjustment is necessary when exchanging the Tuner Module and IC3003 VIF/SIF IC.
88116
30 58
129
59
87
41
58
14
5 8
1
128
1 2
3 4
5
6
7 8
910
11
1213
14
15 18
1 9
1
10
19
1
10
15
1
1 3
46
1 19
1 2
3 4
5
7 8
910
1213
14
15 18
1 15
1 2 3
46
1
102030
35
1
32
111
1222
2333
34 44
12
14
1 7
8
18
1 2 13
+ -
C21
15
R2119
X2001
C2106
C2105
R2007
R20
04
C2104
C2103
C2102
R21
02
C2101
R21
01
R20
38
R21
18
R39
49
IC20
01
C21
11
X22
71
IC2251
C22
51
C2582
C2584
C26
22 C26
23C26
26
IC2581
IC2351
R2357
C23
56
X2351
CN2006
C28
01
C28
03
C2813
C28
11
C28
07C
2812
C28
10
C28
04
C28
02
C28
06
C2642
R23
05
R2012
R2011
R23
03
CN2003
KN2003
KN
2002
KN2001
C25
34 C25
33
R23
61
C2254
JA2832
C23
54
R2355Q2351
R9004R9005R9006
R90
07
R90
08
CN2007
C21
07
C21
08C21
09
R21
15
JA2201
R21
13
C23
55
C2357
R23
60C
2358
R23
59
R23
58
C2353
R23
54
C23
52
R23
52
R23
53
R23
51
C2351
R21
03
L264
2
C203
R23
56
C2815
C28
14
R22
51R
2252
C22
53C
2252
R20
01R
2002
R20
03
R2005
R2013
R20
81
R20
84
R20
86R
2087
R20
85
R20
83
R20
79
R20
71
C21
19
R20
43
R20
66
R20
16
IC25
51
C2553
R2551
KN2007
CN2005
R20
48
CN211
CN2009
C2544
IC2541
R23
09
C28
17
C28
16
C2516
R2311
L2301
R2317
R2315
R23
16C
2303
R2318C2302Q2306
CN2008
C25
05
C25
06
R33
54 Q33
44
L334
4
L334
3
R3351
R3357 Q33
43
R33
52
R3350
C3353
C33
49
C33
47
C33
50
C33
51
C33
52 R33
55
C33
16
D33
04 D33
03C
3315
C33
14
C3310
D33
02
D33
01
C33
11C
3308
Q33
42
R33
48
L334
2
R33
46
L334
1
R3342
R33
45
R33
44
Q33
41
C33
07
C3346
C33
41 C3343C3344 C
3345
C33
01
R33
43
C3029
C30
28
C3026
C3022
R30
23
C3015
C3013
C3006
C3009
C3001
U30
01
R34
42
Q34
07
R34
35R
3436
R34
32
R3423
C34
19
R34
24
R3420
Q3404
L340
3
C34
15
R34
21
R34
05
L340
1
C34
03
C35
18
C35
17
C35
16
C35
11
C35
15
C35
07
C35
04
C3083
JA3081
C3552
C3554
C35
55
JA3551
C3364
R30
26
Q30
06
L300
5
C34
27
R3561
Q3554
Q3556
R33
04
C33
54
C33
55
CN3002
L340
9
L340
7
L340
5
C39
35
C3936
C39
31
C3934
C39
29
Q39
15
R39
37
R3941
C39
32
C39
30
C3933
Q39
16R
3933 C3928
VR3902
F39
03
R39
09
VR3901
F3901
C39
04
L4002
Q30
99R
3099
R30
98
L309
8
C3099
C3201
R3908
R39
31
Q39
13
R3930 F3902
R3925
C33
57
C33
56
F39
11
F39
12
R39
10
F39
04
R39
22R
3921
CN210
F39
06
R39
45
R39
44
C4033
CN3001
L309
9
R39
35R
3934
R3942
R3915
R33
56
R33
49
Q30
04
L390
9
L3910
L391
1
L3912
Q39
06
C3010
R202
JA3582
Q4004
C4028R4019
C40
27R4018
R40
17
C4026
R4016C4023
Q40
03
C40
22
R4014
R40
13
R4012
X40
01
R40
15C
4024
R40
11
C4016
C40
15
R40
10
C4014
C4013
C4012
C4011C
4019
C4020C
4017
Q4001R4008
R4006
R4007
Q40
02
C4009
C40
08
C4006
C4007C4004
C40
03
C40
10R
4003
C40
01
R40
05
IC40
01
C4002
C3533
R3998
R2205
R30
05
CN
3003
R21
08
C2204
R3597
C40
32
C2140
R23
01
R20
58
C21
41
R2145
R10
00
C21
42
R2146
R2059
R21
09
ST2271
R21
40
D33
06
R3599
C2118
Q2640
C26
40
R3457
C2152C2153
C21
54
R20
57
D33
05
R10
01
L203
9
R20
78
C3641
IC2003
R21
10
R20
29
R20
80
Q3565
Q3564
R35
74
R35
73
C2082
R20
17
R22
53
CN2001CN2004
Q34
51
C22
10
R2209
Q22
05R
2210
R36
43
R36
42
C36
42
Q34
52 L3451
R3456
R3452
R34
53
R3454
R34
55
BT2271
R22
54
CVBS2
WARNING
AG
C2
AFT2
ARM2T
TUJB ASSY
L`AFCAdjust
AGC
FC DCPC
1C
1V
3V
Adjust
CONTACT UPPER SIDE
AdjustAFC
19
1
33
34
1222
23
44
11
1
8 1
41
8 5
E B C2
C B2 E2
V+5E
V+3.3
SWV+6E
V+13SW
V+6SW
V+13SW
V+5VO
V+
5V
I
V+
6S
W
V+
5M
V+
5V
O
V+
5E V+5VO
V+15E V+5VI
V+
15E
V+
5V
I
V+6EV+13SW
V+6SW
V+37E
V+
5T
U
131
151
1 9
15 1
CMKD-P3X
351
2
8 1
211
58
129
59
87
88116
30
34
1
1
1 19
25249.6 - PROPOSITION 65HEALTH & SAFETY CODE SECTIONDEFECTS OR OTHER REPRODUCTIVE HARM.OF CALIFORNIA TO CAUSE CANCER,BIRTHCHEMICALS WHITCH ARE KNOWN TO THE STATEAND CERTAIN ELECTRICAL PARTS CONTAINTHIS PRODUCT CONTAINS LEAD IN SOLDER
8
1
5
4
1 3
46
1
32
12
1 7
814
-+
TUJB ASSYB SIDE A
VR3901L4002
Fig.1 Adjustment Points (TUJB ASSY)
CN3003 Pin1
AFT2
715 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S72
6.2 MAIN ASSY ADJUSTMENT
MAIN ASSY IC3402 Pin8 (XTO)
(SM8707KV)
No. Adjustment Name Adj. Point Measurement Point Adjustment Value Adjustment State
1 27.000000MHZ ± 130Hz
Master clock free-running adjustment(Clock system adjustment) VC4201 No signal input
* It is not necessary to adjust the ASSY normaly when exchanging the ASSY but confirm the data.
D1111
R5104IC5101 C
1061
C5111R5236
5CN5102
R5121
R5110
C5101
C5131
C5135
TP34TP36
C4033
82
71R5247
82
71R5249
82
71
R5263
R5262
R5260
R5120
R5116
R5122
R5114
R5253
R5254
R5256
R5257
C5210
C5121C5122C5124
C5209
C5212
C5204
C5206
C5214
C4032R5102
R5208TP35
TP4015
C5102
F5101
C5207
R52521 7
2 8
R5251
L5101
L5102
IC4007
3 1
4
R5103
R5108
R5107
R5106
R5105
1
208157
156X5101 7 1
33
321716
R5235
R5216
R5217
R5231
R5109
R5125
R5128
R5117
R5115R5126
R5129
R5232
R5214R5233
R5215
R5234
C5103
C5105
C5110
C5112
C5127
C5120
C5216C4035
C5132
C5138
C5137
C5136
TP31
TP32
TP33TP37
TP38
TP5202
TP5201
C5104
C4034
L5103
L5104
L5106
L5105
12
1TP1026 TP4305TP3303 TP3301R5292
R1005
C5231C5224 C5229
C1013
R5298R5297R4504
R1074
53
R4405
C5205
Q2104
Q2105
TP5204 R1102
F1001
C2265
C5218
R5283
R2109
R1011
C1041
C1037
C1034
C1028
C1027
C1025
C1016
R4110
R5124
R5123
R5286
C5118
C5119
C5123
C5227 R4109
VR
1001
14
20
CN
4601
R4105
R5272
R5130IC5202
6449
481
82
71
R5275
8 7
R5218
82
71
R5219
82
71
R5220
82
71
R5221
82
71
R5274
82
71
R5273
C1011
C1014
R5237
R5238
R5132
R5131
R1071R5112
R5113
R5127R5276
R1111 R1052
R1012
C5113
C5125
C5126
C5226
C5217
C5215
C1114
C4107C4102
C4105
R4108
R1007
R1001C1054TP1060
TP
5106
Q1102C4106
VR2104
X4102
3 229
1
C1104
R4106
R4107
R2112
R2115R1024
R1023
R1022
R1021
105104
52
2 1 2 1
R5290
82
71
R5289
82
71 R
5229
21
82
71 R5230
C1050
C1004
C1003 C
1002
C1001
C1508
C1509
R4104R4103 R
4102R4101
R5280R5281
R5228
R5224
R5288
R5225
R5278R5279
C1510
R5227
R2113
R4403R4402 R2114R2116
R5277R5287
R5282
R5313
R5314 R5265R2266
C5228
C4103
C4104
F1007
R1003
R1009
C1060
TP28
TP4708TP4707
TP4706TP4702
TP1041
TP1050
TP1051
IC4101
145
8
VR
2105
VR
1002
R1031
Q2103
TP4701TP4703 TP4302C5321 R1004
C1006
R2107
CN
4702
C5225
R2102
R2103
TP4705
Q2102
Q2101
R4407
12
R5295
R5296
R5242
R5240
R5241
R5243
R5248 R2106
R2105
R1034 C2246
C5329
C5213
C5211
C5208
C2105
C2106
R2252
R5284R5285
R5244
R5245
R5246
R5239
R5261
TP1002C1042
C1017
F1005
R1006
C1057
TP4709
TP4711
TP4710
TP4718
TP4719
78R5259
17
28R5258
17
28R5250
17
28R5255
17
28 R4306
17
28
78
R4406
17
28
R2111
82
7
C5230C5223 C5222
C3307
C2102
C2103 C2104
R3307
R3306
R3305
R1066
R5293R5294
C1005C1051C1052 C1012
C1044
C1045
C1018
C1019R3303 C1055
C3309
TP4304TP4307
TP4704 TP4712
TP4713
CN
4401
R4305 17
28
78
R4408
1
CN
4301
15 28
IC3301
C1056
C1059IC5204
82
71 R4436
82
71R4304
82
71R43034
0
39
D4401
C5221 TP1013
TP4717
TP4716TP4715
TP4714
TP4303
TP4301
TP3302
C2101
C1058
R1008
F1006
F1004
C1021C1048
C1047
R3310
R4435R4432
R4429
R4428
R3308
R4427
C1022
C1023
C1024
C1026
C1030
C1029
C1035
C1038
C1036
C1049
C1039
C3308
C4401
F1003
F3102
D3102
D3101
D3104
D3103
R4001
C2225
C4213
C4212
C4006
C4005
R1905
R2306
IC4008R
4201
4 1
X4201
1
F4201
C4201
C4202
R4017
C4028
D4001 1
14
C4036
C3403
R3411
82
71 R
4508
82
71 R
4509
82
71 R
4507 8
2
71
R4302
21
8 2
7 1
R10488 2
7 1
R10458 2
7 1
R104385IC34032 3
VC4201
C3107
F3401
F3403
9 16
IC3402
C4211
C3404
C3405
C3407
C3302C3303
C3108
C3408
C1053
C1040
R3309
R2227R3405
R3406
R3407
R3403
R3304
R4505
R4440
R4205
R5223
R5222
R1080
R3102
R3301
C3301
C2221
TP3401
TP4202
TP4306
TP1012
TP1027TP1028
TP1029TP1030 TP1032
TP1031TP1033
TP1024
D4202
C4206
Q2311
Q2222
R4204
R1902C3105
C4208
C4203
F3402 5
C4014TP3402
TP3403
C2222
R2233R2235
R3410
R4202
R4206R
4210
R4211R4212
R3409
R3107R3106
R3108
R3105
R2311 R1901
R4531R4530 R1903
R1904
C3101
C3406
C4209
C3106
C2317
F4004
8
IC3101
8 9
41
L4201 1 3
IC4205
14
8
CN
4501
R4510
17
28
R3408 L4202
C3402
C1901
Q2312
TP4201 TP4008
R4015
F4001
C4031
C4018
C4027 R2239R4207R4208R4209
R3103
R3104
R2313
R2314R2312R4534
R4537
R2221
CN
1901
C4210
C4207
D4201
F4202
C3102
161 IC420645
IC4004
13
4 5
R4538
17
28 IC4207
C2334
854
1
IC2301
13 4
6IC
2331
L2101
R4213
40
39
1 32
CN2001
8 1
CN4001
IC4003IC4005
211CN3001
D4501
20
1110
1
IC3001Q2001
Q3202Q3201
Q2402
D3001D3002
TP50TP49
TP48
TP47
TP46
TP45
TP44
TP43
TP42TP41
TP40
TP39
TP4001
TP4009
TP4003 TP4002
TP4010C4004
C2405
R4014
R4010
R4009
R3002
R2017
Q2403
C2333
C2311
C2305
C2332
C4010
C4021
C4024
C4023
C4013
R2041
R2042
R2043
R2044
R2045
R2046
R2331
R2332R2333
R3271
R3270
R2019
R3022
R4541
R3010
R3001
R3003
R3012R2411
R2412
R2406 R2405
R2407
R2409 R2408
R2012
R2011
R2013
R2015
R2014
R3023
R3024
R3202
R4004
R4008
R2404
R3025
F4003
C2407
C2319
C3004
C3002
C3001
C2406
MAIN ASSYD SIDE A
VC4201
IC3402 Pin8
Fig.2 Adjustment Point (MAIN ASSY)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
7. GENERAL INFORMATION7.1 DIAGNOSIS7.1.1 CPRM ID NUMBER AND DATA SETTING
Entering the ID Number and ID Data for DVD Recorder
To enter the input mode, press ESC + STEREO sequentially in a status with no ID number set, such as after FLASH-ROM downloading.
• " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode.• When the MAIN ASSY , DRIVE ASSY or the FLASH ROM is exchanged.
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it according to "How to confirm the ID number" shown below.
Note:Be sure to enter the ID number in Stop mode.Use the service remote control (GGF1381) for operations. Only opening/closing of the tray are performed from the player.The ID data disc is swept out automatically after the recorder has read the data from it.
For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual number (ID number) and ID data to each recorder. If the number and data are not set correctly with the following procedure, operations in the future may not be guaranteed. You will find the ID number to be set on the ID label on the rear panel.
Use DVD Recorder DATA DISC [GGV1134] and Service Remote Control Unit [GGF1381]
The Input is Necessary When:
How to Input the ID Number and ID Data
[Recorder's ID Number Setting] ID Number ?> - - - - - - - - -
<CLEAR> Exit
Input ID Number !
1
As number input is enabled when the unit enters the input mode, input the 9-digit ID number.(The entered number is also displayed on the FL display.)
2
2
[Recorder's ID Data Setting]
<CLEAR> Exit
Insert The ID Data Disc !
When the ID number has been registered, the unit enters the ID data input mode. (The FL display indicates "INSERT ID.")In this condition, place the ID data disc on the tray and close the tray using the CLOSE key "7/0" on the player.
4
4
[Recorder's ID Data Setting]
Loading The ID Data Disc !
While the data are being read, the message shown in the figure at left is displayed on the screen. (The FL display indicates "LOAD ID.")
5
5
[Recorder's ID Number Setting] ID Number ?> 0 0 0 0 0 0 0 0 1 OK ?
<PLAY> Compare Mode<SEARCH> Enter
Input ID Number !
After inputting the number, press SEARCH to register the ID number.
3
3
735 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S74
How to Confirm the ID Number
How to Clear the ID Number
[Recorder's ID Data Setting]
Wait Rom Writing !
When the ID data have been read, the data are written to the FLASH-ROM.(The FL display indicates "WRITE ID.")
6
6
[Recorder's ID Data Setting]
Rom Write OK !
<CLEAR> Exit
When the ID data have been written to the FLASH-ROM, the message "Rom Write OK" is displayed on the screen.(The FL display indicates "ID DATA OK.")
After confirming this message, press CLEAR to exit the input mode.
7
8
7
8
[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1]Compare> * * * * * * * * *<CLEAR> Exit
Input ID Number !
Press ESC + STEREO sequentially with an ID number already set, and the unit enters the ID number confirmation mode.
The set ID number is displayed on the screen (and on the FL display), permitting you to confirm it.
To exit this mode, press CLEAR .
1
Press ESC + STEREO sequentially with an ID number already set, and the unit enters the ID number confirmation mode.
Input the same number as the ID number you have set.
1
2
2
3
2
3
[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1]Compare> * * * * * * * * *<CLEAR> Exit<STEREO> ID Data Setting Mode
<STEREO> ID Data Setting ModeInput ID Number !
2
After inputting the number, press STOP .Only when the entered number matches the set ID number, the ID number is cleared and the unit exits this mode.If the numbers do not match, you must return to step 2.( STOP is not accepted until 9 digits are entered.)
3
[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1]Compare> 0 0 0 0 0 0 0 0 1 OK ?
<PLAY> Enter<STOP> Memory Clear
Input ID Number !
3
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
7.1.2 SERVICE MODEFor service operations, use the GGF1381 remote control unit for service.The Service-mode screens consist of nine mode screens, which are classified into such rough categories as recording system and VR playback system, and their subscreens.
• How to enter Service mode : Press the ESC then DISP keys in turn while no GUI is displayed. The first screen (version information, etc.) shown below is displayed.
• How to exit Service mode : Press the ESC key.• How to advance to the next Service-mode screen
: While the first screen is displayed, press directly one of the keys 1-9. For service, use the keys 2, 4 or 5, as shown below.
• How to advance to a subscreen within the same Service-mode screen: Press the DIG/ANA key. Pressing the DIG/ANA key repeatedly will change the subscreens
within the same Service-mode screen cyclically.
The Service-mode screens to be used for service are as follows:1 = First screen: Version information, etc.2 = Second screen: ATA/ATAPI debug screen (Writer data)4 = Fourth screen: Error log for the VR recording system5 = Fifth screen: Error log for the VR playback system
Note: After entering one of the Service-mode screens, if you wish to shift to another Service-mode screen, exit Service mode first, then reenter Service mode and select your desired Service-mode screen.
DVR-3100-S/WYSYSCON : 2.00
ComRev : 1.1140.2.6 $FirmRev : 1.2834.2.4 $AppRev : 1.3873.2.8 $
TUFLCON : 2.18 F OK DRIVE : DVD-RW DVR-106 OK
1.01L CBT0900720WL OK
H D D : ----DEVICE : PRISM=ES 2.0CREGION : 2
C : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
Description of Each Service-mode screen
• Subscreen: Result of error-rate measurement
ERR RATE : x.xe-x/
12
45
678
3
OK : OK (proper combination)OK+ : Version of the tuner microcomputer too advancedNG– : Version of the tuner microcomputer too oldNG! : "Type"(e.g. J type, WY type) of Syscom's and TUFL
microcomputers are mismatching.
OK : OK (proper combination)OK+ : Version of the drive too advancedNG– : Version of the drive too old
OK : Serial No. of the drive already registeredNG : Serial No. of the drive not registered
1 Model name/destination2 Version of the recorder software3 Revision No. of the system-control computer software
(Edition administration No. [from top to bottom, common software, firmware, application software])
4 Version No. of the tuner microcomputer, Mask or flash (M: Mask type, F: FLASH type)
5 Information on the built-in drive(Model name, version No., serial No.)
6 Version No. of PRISM7 Region No.8 CPRM data (CPRM key No.)
While the first screen shown above is displayed, press the DIG/ANA key to enter the subscreen shown below.Note: Each time the DIG/ANA key is pressed, the display changes between the first screen and its subscreen.
Note: Be sure to start playback after displaying this subscreen to calculate the error rate.
1. First screen (version information, etc.)
During playback in VR mode, the average error rate of the past 10 VOBUs is displayed, and during playback in DVD-Video or Video mode, the average error rate of the past 256 sectors is displayed. During playback in VR mode, the rotation rate of the drive (/: normal speed, no display = double speed) is also displayed.
755 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S76
• Subscreen 1: Command log (ALL) of ATA/ATAPI DEBUG OSD
Subscreen 1 of the second screen is displayed when the ESC, DISP, then "2" keys are pressed, in that order.Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.
The cumulative power-on time and error log that are administered by the writer are displayed. Such information is obtained when the power is turned on. Thereafter, each time the SEARCH key on the remote control unit for service is pressed while subscreen 3 is displayed, the updating command is sent, and the data on the subscreen are updated. Care must be taken when updating this subscreen, because an undesired command is inserted if it is executed while recording, etc.
A T A / A T A P I History - ALL3 2 0 1 0 0 0 0 0 0 0 0 0 0 A 0 0 0 OK3 2 2 A 0 0 0 0 0 D E B B 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 D F 1 E 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 D F 8 1 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 D F E 4 0 0 0 0 6 2 0 0 0 OK3 2 2 A 0 0 0 0 0 E 0 4 6 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 E 0 A 9 0 0 0 0 6 3 0 0 0 OK3 2 2 A 0 0 0 0 0 E 1 0 C 0 0 0 0 6 3 0 0 0 OK
> 3 2 2 A 0 0 0 0 0 E 1 6 F 0 0 0 0 6 2 0 0 0 2 3 A 0 0
• Subscreen 3: Writer mentenance information of ATA/ATAPI DEBUG OSD
A T A / A T A P I Writer MaintenanceInfoPower ON 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 1 0 2 : 5 6 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0D V D 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0R 0 0 5 3 : 4 8 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0W 0 0 2 2 : 1 6 0 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0C D 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0R 0 0 3 4 : 0 4 0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0W 0 0 0 0 : 0 0 0 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0- 0 0
• Subscreen 2: Command log (ERROR) of ATA/ATAPI DEBUG OSD
Error log for the Writer
1
23
45
1 Power-on time/cumulative power-on time2 Duration of emission of the laser diode (LD) for DVD-R/DVD while reading3 Duration of emission of the LD for DVD-W/DVD while writing4 Duration of emission of the LD for CD-R/CD while reading5 Duration of emission of the LD for CD-W/CD while writing
2. Second screen (ATA/ATAPI debug screen)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
The degrees of degradation of the LD (laser diode) for the writer (LDs for CD and DVD separately), temperature, and RF level are displayed. To update the data on the subscreen, press the SEARCH key on the remote control unit for service while subscreen 4 is displayed. See Table 1 below for a description of each item and the conditions for updating data.
• Subscreen 4: ATA/ATAPI DEBUG OSD_LD degradation judgment
12345
A T A / A T A P I - LD Degrade C D : 0 0 7 0 1 0 4 % O KD V D : 0 0 6 8 9 6 % O KT M P : 0 0 A 3 4 1 °CA D J : 0 0 67 2 6 °CRF : 3 D 7 0
Table 1: Description of each item and conditions for updating data
No. Item DescriptionConditions for updating by pressing the SEARCH key
Remarks
1 CDDegradation judgment of LD for CD. Regarded as NG when the value is 120% or higher (same standard as for the PC drive) No disc inserted in the disc tray ∗ 1
2 DVDDegradation judgment of LD for DVD. Regarded as NG when the value is 120% or higher (same standard as for the PC drive) No disc inserted in the disc tray ∗ 1
3 TMP Current temperature inside the Writer No disc inserted in the disc tray ∗ 1
4 ADJ Temperature (approx. 25°C) inside the Writer during adjustment No disc inserted in the disc tray ∗ 1
5 RFRF level (16-bit data, proportional calculation performed using the actual RF level value with 2.5 V = 0xFFFF as the maximum value, displayed in 4-digit hexadecimal)
During playback of disc medium
∗ 1 : For correct judgment, after leaving the unit at a normal temperature for some time, judgment must be performed immediately after the unit is turned on with no disc loaded.
775 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S78
• Subscreen 1:
• Subscreens 2 and 3:
• Subscreens 5 to 11:
• Subscreen 4: Error log for VR recording
Subscreen 1 of the fourth screen is displayed when the ESC, DISP, then "4" keys are pressed, in that order.Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 11.
1 Recording-related error log for the last 18 errors, divided into 2 screens(generation time [year-month-day, hour:minute:second], error data in simplified description)
RunFnc : ---- Ecl : **** Rate : **------------------------------------------------------------------------------------------------------------------------------------
R e c o r d i n g E r r o r H i s t o r y D i s p l a y0 1 – 0 6 – 0 1 2 0 : 0 5 : 3 0 N o S y s H d r I N0 1 – 0 6 – 0 2 0 0 : 2 2 : 1 0 W r i t e E r r o r
1
Notes:• For details on error messages, see Table 2 "Description of VR-recording-related errors".• The two error-log screens can be switched by pressing the SPEED+ or SPEED- key.
These subscreens are not for service use.
These subscreens are not for service use.
3. Fourth screen (VR-recording-related error log)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
• Subscreen 1:
• Subscreens 3 and 4:
• Subscreen 2: Error log for VR playback
Subscreen 1 of the fifth screen is displayed when the ESC, DISP, then "5" keys are pressed, in that order.Note: Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.
1 Data on location of the displayOriginal(G)/play list (L), title No., chapter No. (X:XX-XX), time of the display (min, sec, frame [XXmXXsXX]), busy mark of the virtual mechanical-control computer (#), error rate of the transfer data (X.XeXX), playback logical address (ID [XXXXXXXX])
2 Error message logOriginal(G)/play list (L), title No., time of generation (min, sec [XXX:XXXX]), playback-related error log for the last 13 errors (XX:XXXXXXX)
G : 0 1–0 1 0 0 m 0 0 s 0 0 # –. – e – – 0 0 . 0 0 MTgt : STOP Now : STOP Spd : 0Man : STOP Sub : 0 VBF : 000 ABF : 00TrMd : STOP TrSt : 0 TNo : Ver : 00RvMd : STOP RvSt : 0 DNo : Aer : 00CcSt : STOP ld : 00000000Stc : 00000000 Tpp-Av1 : +-0 V-A : +-0MPEG2 720x480 A0 AC-3 2ch 0256kNT ASP : 43 CGMS : 0 APS : 0 Src : 0END : 00m00s00 Cell : 000
G : 0 1–0 1 0 0 m 0 0 s 0 0 # –. – e – – 0 0 0 0 0 0 0 0m s M e s s a g e m s E r
G01 : 0 0 0 0 Tr : N u l l b l k L 02 : 1 2 3 0 Tr : S c h L a t e L 02 : 4 1 0 3 Tp : V o b D i f + L 02 : 4 1 0 4 Tp : V o b D o f –
1
2
These subscreens are not for service use.
4. Fifth screen (Error log for VR playback)
Notes:• For details on error messages, see Table 1 "Description of VR-playback-related errors".• If a VR-playback-related error is generated, a problem in data reading from the disc may be suspected. (The possibility of a problem on the drive side is high.)
795 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S80
egasseMrorrE noitpircseD
klBlluN:rTkcolbpotehttaLLUN:ksatrefsnarT
).ssecorpnoitcetorpgnitratsdnaseires0001-RVDehttaedammaertsGNgnitceteD(
rrEdaeR:rT rorredaerATA:ksatrefsnarT
etaLhcS:rT etalhcraesATA:ksatrefsnarT
rvOTmeS:rT )yalpsidehthtiwnoitazinorhcnyson(erohpamesgniniagroftuoemiT:ksatrefsnarT
rrEivaN:rT IVANlautcadnaatadtnemeganamfo)rotagivan(IVANneewtebycnetsisnocnI:ksatrefsnarT
rEredrO:rT redrotnetsisnocnI:ksatrefsnarT
gnaH1vA:nM yrevocerstratsdnaredocedVAfopu-gnahstceteD:ksatniaM
!VCR_RRE yrevocerstratsdnaredocedVAfopu-gnahstceteD:ksatPPT
+fiDboV:pT .ruohUBOV1ybsecnavdaCTSredocedehT:ksatPPT
-fiDboV:pT secnavdanoitamrofnitnemeganamehtfoCTSehT:ksatPPT
LLUNdim:pT .LLUNsawdetangisedretniopnoitamrofnitnemeganamehT:ksatPPT
gNnacS:pT .delecnacsawgninnacsnehwyromemPPTehttesoteruliaF:ksatPPT
rEpetSR:pT .detacolsawllecpotehtesuacebdetanimretylbicrofsawnoitarepoeht,deliafdahpetsesreverehthguohtlA:ksatPPT
rrEppt:pT .derruccoycnetsisnocnI:ksatPPT
rvOTts1:vR gnidocedgnitratsretfayletaidemmiUBOVpotehtotnoitpurretnirofgnitiawroftuoemiT:ksatkcabyalpesreveR
rvOTnpO:vR gnidocedgnitratsretfayletaidemmiPOGnepoehtfoerutcip-BrofgnitiawroftuoemiT:ksatkcabyalpesreveR
rvOTlpO:vR gnidocedgnitratsretfayletaidemmiPOGnepoehtfoerutcip-IrofgnitiawroftuoemiT:ksatkcabyalpesreveR
rvOTknL:vR knilrofgnitiawroftuoemiT:ksatkcabyalpesreveR
liaFknL:vR eruliafknilgnitcetedybnoitasnepmocstratS:ksatkcabyalpesreveR
rvOTF2R:vR esuapdrawrofotesuapesrevermorftuoemitgnitcetedretfalairterstratS:ksatkcabyalpesreveR
rEbVpoT:vR kcabyalplamronesrevergnirudatadpotehtfororreelbissopafoesuacebnoitanimretdecroF:ksatkcabyalpesreveR
rEredrO:vR redrotnetsisnocnI:ksatkcabyalpesreveR
rvOTC/B:vA tuoemitraelc-reffuB:1VA
rvOmrtS:vA ydaermaertsrofgnitiawroftuoemiT:1VA
rvOTmpT:vA egnahcedomPTroftuoemiT:1VA
rvOTmpS:vA dnammocpetsaroftuoemiT:1VA
RRE_SO_CC rorreSO:ksatnoitpacdesolC
Table 1: Description of VR-playback-related errors
Abbreviations:STC = System Time ClockVOBU = Video Object UnitGOP = Group Of PictureB-picture = Bidirectionally predictive-picture
I-picture = Intra-pictureP-picture = Predictive-pictureTP mode change = AV1 term (Trick Play mode change)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
Table 2: Description of VR-recording-related errors
ErrorMessage
DescriptionError
MessageDescription
Non Err ∗ Normal Invalid TMVMG Invalid TMP_VMGI content
DRAM NG Abnormality in access to the work DRAM Unmatch Stamp ∗ Impossible to modify because of nonmatching time stamps
SRAM NG Abnormality in access to the backup work SRAM Virgin DISC Blank discCPRM IC NG Inappropriate CPRM IC Fail Repair Repair failed
Drive Destroy The drive has crashed. ReadOnly DISC ∗ Because some data are invalid, data cannot be written.
MKB REVOKED Error in gaining data Rzn Rsv NG R-zone reserve failed. WM Cracked WM cracked Rzn Cls NG R-zone Closure failed.VBR-SRAM NG Abnormality in VBR SRAM Rzn Rpr NG R-zone repair failed.BK BATT Down Backup RAM data has been erased. Bdr Opn Opening of border failed.
BK FSYS DirtyBackup RAM data has been written on the file system.
Bdr Cls Closing of border failed.
Stream NG Inappropriate input stream data Format NG Formatting failed.Stm Start NG Failure to start encoding (reasons not clear) OPC NG OPC failed.AVEnc Hang Inappropriate MPEG encoder PCA Full PCA has been used up.No SysHdr IN System packet is not input periodically. RMA Full RMA has been used up.
Strm Start NGTimeout waiting for system packet input at the beginning
SW Vrec mode ∗ Switching to video recording routine is required.
IN Encode ∗ Changes cannot be made in the process of encoding
SW Vpb mode ∗ Switching to video playback routine is required.
EncModul Hang Encoder routine is hung up. NV Pck MK Err Error in creating NAVI packOurob Strm NG Inappropriate stream data to the Ouroboros input NV Pck DMA Err Inappropriate NAVI pack DMAWaterMark Det Watermark detected Cell Close NG Cell closure failed.BUF Overflow Overflow of the stream buffer Something ∗ Undetermined errorDrive Hang The drive is hung up. Status NG ∗ Abnormality in change of statuses
Write ErrThe drive failed to write and could not be recovered.
Irr Action ∗ Incorrect action
Read Err Reading failed, ECC failed, etc. Abort ∗ CancellationDrv Hard Err Abnormality in the drive hardware or firmware Repair Exec Repairing has been executed.
Mech No ResNo response from the mechanical-control computer
Format Exec Formatting has been executed.
Drv TimeOut Timeout waiting for drive operation BUG Some bugsNWA Exhaust NWA surpassed and impossible to use BusReset Done Bus Reset has been executed.MKB Invalid MKB reading error Task No Activ Task has not been activated.Drv Err General error of the drive Mem get NG Video mode memory has not been ensured.
DISC FullNo further data can be written because the disc is full.
V Rsv RzoneNG Video mode reserve R-zone failed.
No More Info ∗ No more space in the internal work-management area
Tracon Tm NGVideo Mode Tracon transfer has not been completed.
No Perm ∗ No permission to write to the disc DRAM CLR Err Video Mode DRAM (Stream Buffer) clear failureLimit Over ∗ Standard maximum limit exceeded VTSI_B Wr Err Video Mode VTSI BUP write errorRec Pause ∗ No operation permitted during recording pause VTSI Wr Err Video Mode write errorNo Video ∗ No video input (not locked) TMP-VMG WrErr Video Mode TMP VMGI write errorRelocation Do VR-recording data was relocated. CLS Rzon Fail Video Mode Closure R-zone failureInvalid Param ∗ Invalid parameter V Categ ID NG Inappropriate Category IDProtect Src ∗ Source to be recorded is copy-protected. V Cate Inf NG Inappropriate Category informationNow Busy ∗ In the process of the emergency processing V Ext TY NG Typing errorInvalid Disc ∗ The disc cannot be recognized. V Ext MAX Ovr Count MAX exceededInvalid UDF ∗ Invalid UDF content V ExtfToo Big The extension file is too large.Invalid VMG ∗ Invalid VMG content HDD Destroy HDD not recognized on the bus.
Notes;• Any error message marked with ∗ is displayed "RecErr : ---------"
on the Subscreen 1 of the fourth screen.• : Indicates an error of the MPEG encoder
: Indicates an error of the drive system• In a case of an error in the drive system, scratches or dirt on a disc,
or a problem of the drive itself (dirty pickup) may be suspected.
Abbreviations:ECC = 4 byte Code for Error CorrectionUDF = Universal Disc FormatPCA = Power Calibration AreaOPC = Optical Power ControlNWA = Next Writable Address
VMG = Video ManagerRMA = Recording Management AreaMKB = Media Key BlockTMP_VMGI = Temporary Video Manager
InformationBorder = from Lead-in to Lead-out
815 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S82
Table 3: List of Key Codes
How to enter each check modeTest mode remote control unit : [A8**] Remote control unit supplied with the DVR : [AB**]
No. Check Item Key Input Operation / purpose Remarks
1EE system(same as preview)
[ESC] → [A.MON] Turns on/off EE mode cyclicallyMake sure that CGMS = 11 becomes when CGMS = 10 is input.EE mode: Simulation mode for recording status
[PLAY] Starts the EE system in EE mode (main-unit setting rate)
[STOP] Stops the EE system in EE mode
2 Error-rate measurement [ESC] → [SIDEB]
V-mode recording:After recording for 10 seconds, the unit starts playback while displaying the error rate.DVD-Video:The error rate is automatically measured, then the result will be displayed.
For details, see" 7.1.4 ERROR RATE MEASUREMENT ".
3 Settings for specific areas
[ESC] → [CHP/TIM] Enters Adjustment mode for AVIO settings
Settings are made for the selected input (TUNER, LINE).For details, see " 7.1.5 SETTINGS FOR SPECIFIC AREAS ".[ESC] Determines the settings, then exits
Adjustment mode
How the ESC code is processed• When the ESC code is received, ESCAPE mode is entered, but in combination with the code(s) that follow(s), a specific meaning is added.• If ESC codes are received continuously, ESCAPE mode is retained.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
7.1.3 DV DEBUG MODE
(DV/1394) Init:OK AV:01 DV:01 INT4:02
[Recoder] GUID:00E036000160001 IRMiPCR:C03F0000 oPCR:0000007A[DV] GUID:0080880303480E96VN:VICTOR MN:GR-D50KTM:C3 TS:75 CT:32 WP:01 PS:FF OS:00
[DVdecoder:Yes]TC:00h20m35s02f RD:02/02/05 RT:10h34m50sASPECT:4:3 CGMS:000000 APSTB:00 DEC:525-60SF:32kHz QU:12bit AMODE:4) Stereo[DVencode:No]TC:--h--m--s--f RD:--/--/--/-- RT:--h--m--sASPECT:-------- CGMS:-- APSTB:--
1
2
456
78910111213
3
Press the ESC, DISP, then "8" keys, in that order.
Boldface alphanumerics : Fixed indicationsNonboldface alphanumerics : Variable indications
No. Item Description Remarks
1
InitWhether the initialization of uPD72893A (1394LINK & DVcodec IC) has been completed (OK) or not (NG)
In a case of NG, communication with uPD72893A may have failed.
AV Number of AV devices on the local bus
DV Number of DV devices on the local busIf the number does not become 01 even if a DV device is connected, identification of that device fails.
INT4Number of executing INT4(PIO) interrupt processing routines until a POWER ON notification arrives from uPD72893A (normally, 02)
2 GUID GUID set in ConfigROM of the unitIn a case of ROOT (IRM), IRM is displayed at the rightmost of the GUID indication
3iPCR iPCR value of the unitoPCR oPCR value of the unit
4 GUIDGUID set in ConfigROM of the connected DV device
Data are displayed only if one DV device is identified. If the connected DV device is ROOT (IRM), IRM is displayed at the rightmost of the GUID indication
5
VNVendor name set in ConfigROM of the connected DV device
Data are displayed only if one DV device is identified. (Depending on the device, the vendor name may not be set in ConfigROM.)
MNModel name set in ConfigROM of the connected DV device
Data are displayed only if one DV device is identified. (Depending on the device, the vendor name may not be set in ConfigROM.)
6
TM Transport Mode data obtained from the DV device
Data are displayed only if one DV device is identified.
TS Transport State data obtained from the DV device
CT Cassette Type data obtained from the DV device
WP Copy-protection data obtained from the DV device
PS Power-state data obtained from the DV device
OSOutput signal mode data obtained from the DV device
7 [DVdecode:XXX]Whether Yes (in the process of requesting DV input) or No is indicated in XXX
Normally, Yes is indicated only when CH is set to DV
835 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S84
No. Item Description Remarks
8
TCTime-code data of the DVdecode Stream, or response data of the Time Code command
Stream time-code data are obtained when playback in the forward direction is performed. Otherwise, time-code data are obtained through an AV/C command.
RD Rec Date of DVdecode StreamRT Rec Time of DVdecode Stream
9
ASPECT Aspect Ratio of DVdecode Stream
CGMSCGMS of DVdecode Stream (from left to right, CGMS data of bits 5-4: Audio ch2, bits 3-2: Audio ch1, and bits 1-0: Video)
Recording of DV input cannot be performed unless the value of CGMS is 00.
APSTB APS trigger bit of DVdecode stream
DEC With/without DVdecode stream inputWith input: Signal type (525-60, 625-50, 1125-60, 1250-50, or Invalid) is indicated, Without input: "No" is indicated.
0
SF Sampling Frequency of DVdecode StreamIf SF is 44 kHz, it is considered that 44.1-kHz audio is input, and sound is muted on the unit.
QU QUANTIZATION of DVdecode StreamAMODE AUDIO MODE of DVdecode Stream
- [DVencode:XXX]Whether Yes (in the process of requesting DV output) or No is indicated in XXX
Normally, Yes is indicated only with HDD or DVD playback
=
TC TIME CODE of DVencode streamRD REC DATE of DVencode streamRT REC TIME of DVencode stream
~
ASPECT Aspect Ratio of DVencode stream
CGMSCGMS of DVencode stream (common to video, audio ch1 and audio ch2)
Normally, sources other than CGMS=00 are not output.
APSTB APS trigger bit of DVencode stream
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
Sim
ple
Dia
gn
osi
s
Sym
pto
ms
Lo
cati
on
in t
he
Deb
ug
Scr
een
Item
s to
be
Ch
ecke
d, a
nd
Co
nd
itio
ns
Po
ssib
le c
ause
s
No
oper
atio
n fo
r ei
ther
DV
in
put o
r ou
tput
1
Che
ck th
e in
it in
dica
tion:
OK
:In
itial
izat
ion
of D
V-r
elat
ed L
SIs
(IC
5101
, IC
5202
) ap
prop
riate
ly c
ompl
eted
NG
:C
omm
unic
atio
n fa
ilure
bet
wee
n D
V-r
elat
ed L
SIs
(IC
5101
, IC
5202
) an
d H
OS
T m
icro
com
pute
r (I
C10
01).
Initi
aliz
atio
n of
DV
-rel
ated
LS
Is (
IC51
01,
IC52
02)
has
not b
een
com
plet
ed p
rope
rly.
Def
ectiv
e IC
, def
ectiv
e so
lder
ing,
def
ectiv
e po
wer
sup
ply,
et
c.
Che
ck th
e nu
mbe
r of
DV
dev
ices
whe
n on
e D
V d
evic
e is
con
nect
ed to
the
reco
rder
:01
:T
he c
onne
cted
DV
dev
ice
is c
orre
ctly
iden
tifie
d.O
ther
than
01:
The
con
nect
ed D
V d
evic
e is
not
cor
rect
ly id
entif
ied.
Def
ectiv
e D
V te
rmin
als,
impr
oper
con
nect
ion
of th
e D
V-t
erm
inal
boa
rd, d
efec
tive
IC, d
efec
tive
cabl
es, a
n IE
EE
139
4 de
vice
oth
er th
an th
e D
V d
evic
e co
nnec
ted
No
pict
ure
nor
soun
d fo
r D
V
inpu
t
7
Che
ck o
f DV
dec
odin
g w
hen
the
reco
rder
cha
nnel
is s
et to
DV
:Y
es:
The
rec
orde
r is
in th
e pr
oces
s of
a D
V in
put o
pera
tion
No:
The
rec
orde
r is
not
exe
cutin
g a
DV
inpu
t ope
ratio
n
Def
ectiv
e IC
, def
ectiv
e so
lder
ing,
def
ectiv
e po
wer
sup
ply,
et
c.
9
Che
ck D
EC
:52
5-60
:A
n N
TS
C D
V s
igna
l is
inpu
t fro
m th
e D
V d
evic
e.62
5-50
:A
PA
L D
V s
igna
l is
inpu
t fro
m th
e D
V d
evic
e.N
o:N
o D
V s
igna
l is
inpu
t fro
m th
e D
V d
evic
e.
Def
ectiv
e D
V te
rmin
als,
impr
oper
con
nect
ion
of th
e D
V-t
erm
inal
boa
rd, d
efec
tive
IC, d
efec
tive
sour
ce d
evic
eN
ote
:A
s to
a m
odel
hav
ing
the
Inpu
t Lin
e S
yste
m
setti
ng, i
f the
set
ting
and
the
actu
al in
put s
igna
l sy
stem
do
not m
atch
, no
pict
ure
appe
ars.
DV
inpu
t rec
ordi
ng im
poss
ible
9
Che
ck C
GM
S:
00:
A c
opy-
perm
itted
sou
rce
is b
eing
inpu
t.O
ther
than
00:
A c
opy-
prot
ecte
d so
urce
is b
eing
inpu
t.
Rec
ordi
ng c
anno
t be
perf
orm
ed fo
r a
copy
-pro
tect
ed
sour
ce.
No
soun
d fo
r D
V in
put
0
Che
ck S
F:
32 k
hz: A
n au
dio
sign
al w
ith 3
2-kH
z sa
mpl
ing
freq
uenc
y is
bei
ng in
put.
48 k
hz: A
n au
dio
sign
al w
ith 4
8-kH
z sa
mpl
ing
freq
uenc
y is
bei
ng in
put.
44 k
hz: A
n au
dio
sign
al w
ith 4
4.1-
kHz
sam
plin
g fr
eque
ncy
is b
eing
inpu
t.
An
audi
o si
gnal
with
44.
1-kH
z sa
mpl
ing
freq
uenc
y is
m
uted
.
No
pict
ure
nor
soun
d fo
r D
V
outp
ut-
Che
ck D
Ven
code
dur
ing
DV
D/H
DD
pla
ybac
k:Y
es:
The
rec
orde
r is
in th
e pr
oces
s of
a D
V o
utpu
t ope
ratio
nN
o:T
he r
ecor
der
is n
ot e
xecu
ting
a D
V o
utpu
t ope
ratio
n(N
o is
als
o di
spla
yed
durin
g pl
ayba
ck o
f cop
y-pr
ohib
ited
sour
ces
or
s
imul
tane
ous-
reco
rdin
g/pl
ayba
ck.)
Def
ectiv
e IC
, def
ectiv
e so
lder
ing,
def
ectiv
e po
wer
sup
ply,
et
c.
855 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S86
7.1.4 ERROR RATE MEASUREMENTHow to enter Error-Rate Measurement modePress the ESC key then the SIDE-B key of the remote control unit for service to enter Error-Rate Measurement mode. During playback of DVD-VIDEO, Error-Rate Measurement mode can also be entered by pressing the ESC key then the PLAY key.
How to exit Error-Rate Measurement modePress the ESC key. The error-rate display disappears, and Error-Rate Measurement mode is exited.
Note: The error rate cannot be measured in VR mode or during CD playback.
Functions1 Video-mode recording (recording medium)
In this mode, DVD recording is automatically performed for 10 seconds, the recorded DVD title is played back while the error rate is being measured, then as soon as playback of the recorded DVD title is finished, playback stops.*1 After error-rate measurement is finished, the average error rate will be displayed on the FL display and OSD. Only in a case in which the calculation of the average error rate fails, the tray will open.
2 DVD-VIDEO (playback medium)Only during playback, when the ESC key then the SIDE-B key (or the ESC key then the PLAY key) are pressed, the error rate is calculated and displayed on the FL display and OSD.(∗ 2) Only in a case in which the calculation of the average error rate fails, the tray will open.
Changes of display
Table 1: Video mode (recording medium)
E R R O R R A T E
E R R O R R A T E
x x x x x
E R x . x E - x
E R x . x E - x
E R R R A T E : x . x E - x -
E R R R A T E : x . x E - x * O K
OperationDisplay
FL Display OSD (On Screen Display)
"ERROR RATE" is displayed on the FL display for an instant.
DVD recording starts.
DVD recording is performed for 10 seconds.
The recorded DVD title is played back while the error rate is being measured, then as soon as playback is finished it stops.
After error-rate measurement is finished (∗ 1), the average error rate, the measurement-finish mark (∗ ), and the OK/NG-judgment result (∗ 3) will be displayed on the FL display and OSD.(If the tray opens as a result of NG judgment, the display on the FL display and OSD will be retained.)
Table 2: DVD-Video (playback medium)
E R x . x E - x
E R x . x E - x
E R R R A T E : x . x E - x -
E R R R A T E : x . x E - x - O K
OperationDisplay
FL Display OSD (On Screen Display)
Only during playback, when the corresponding keys are pressed, the error rate is calculated and displayed on the FL display and OSD. (∗ 2)
After error-rate measurement is finished (∗ 1), the average error rate, the measurement-finish mark (∗ ), and the OK/NG-judgment result (∗ 3) will be displayed on the FL display and OSD.(If the tray opens as a result of NG judgment, the display on the FL display and OSD will be retained.)
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
∗ 1 : Whether error-rate measurement is finished or not is judged, as shown in Table 3 below.
∗ 2 : During DVD-VIDEO error-rate measurement, even after error-rate measurement is finished, playback continues, and the display of the error rate results is retained. In this playback mode, if Error-Rate Measurement mode is exited by pressing the ESC key, then it is reentered by pressing the ESC and SIDE-B keys (or ESC and PLAY keys), the error rate will not be updated, and the previous value is displayed. To reset the previous error rate, stop disc playback.
∗ 3 : OK/NG judgmentIn DVD/VIDEO and Video Mode recording, OK/NG judgment is displayed under the following conditions:
Table 3: On judgment whether error-rate measurement is finished or not
Table 4: List of OK/NG threshold values
Recording ModeJudgment whether error-rate measurement is finished or not
Recording/playback duration required for error-rate measurement
Video mode
After playback of a certain amount (∗ ) of dataMeasurement of the 16 ECC blocks is performed 16 times, then the grand sum is used for calculation of the error rate.The capacity is as follows:16 ECC blocks × 16 sectors × 2048 bytes × 16 times= 8388608 bytes= 67108864 bits
The time required for completion of error-rate measurement varies, depending on the input video signal to be recorded.(The more the motion in the input video signal to be recorded is animated, the shorter the playback time required for completion of error-rate measurement becomes.)
Disc Type Recording Mode Finalized or not finalized Reference Value DisplayDVD-VIDEO 8.0 × 10 OK / NG
DVD-R Video modeFinalized 1.0 × 10 OK / NG
Not finalized 1.0 × 10 OK / NG
DVD-RW Video modeFinalized 1.0 × 10 OK / NG
Not finalized 1.0 × 10 OK / NG
– 4
– 3
– 3
– 3
– 3
875 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S88
7.1.5 VIDEO ADJUSTMENT FOR SPECIFIC AREAPurposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by
the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO control section for adjusting signals received by the tuner can be used.
How to enter setting modes: To enter General Setting mode, press the ESC key then the CHP/TIM key of the remote control unit for service. To enter Specific Channel Setting mode, press the DIG/ANA key in General Setting mode.
How to exit setting modes: Press the ESC key. The setting mode is exited, the OSD disappears.
1. General Setting modeThis mode can be entered only during recording/playback stop. In this mode, each item and its current settings are displayed on the OSD. The currently selected input mode (TUNER or LINE) is displayed. If L1, L2, L3 or DV is selected for input, general settings for the line input can be made, and if TUNER is selected, general settings for the tuner input can be made.
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON ∗Threshold : Manual Threshold Level
Threshold Level : 0 ∗
[General Setting mode] (∗ 2)
∗ : setting is the default.
Table 1: Key operations in General Setting mode (effective only during recording/playback stop)
∗ R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
Key Operation Setting (∗ : Default) Remarks
INPUT SELECT,CHANNEL +/–(∗ R)
Switches inputs or channels. – –
2 ×3, ×3 3 (∗ 1) Sets Sync AGC. ON (∗ ) / OFF –
4 CHAPTER SKIP, CHAPTER SKIP ¢(∗ 1)
Sets Threshold.
(∗ ) NormalAuto Threshold LevelManual Threshold LevelPedestal Level
–
e STILL STEP, STILL STEP E(∗ 1) Sets Threshold level.
According to the setting of Threshold, the values can be changed within the range mentioned below.
–
• Normal: The value is fixed, with no display of the value.
–
• Auto Threshold Level: 0-8 (Default: 0)
The value can be changed with the e or E key.
• Manual Threshold Level: 0-8 (Default: 0)
The value can be changed with the e or E key.
• Pedestal Level: 0-8 (Default: 0)
The value can be changed with the e or E key.
CLEAR (∗ 1)Initializes the setting of General Setting mode.
–
Pressing the key resets all settings of General Setting mode to the initial values. Settings of Specific Channel Setting mode are not affected (they are retained).
ESCExits AVIO setting for specific areas, clearing the OSD.
– –
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
[Display in General Setting mode when the channel currently displayed has specific settings]
∗ 1 : When a setting value is changed, that value is immediately displayed and is stored in nonvolatile memory.• Settings made will not be reset to the default settings even if resetting to the factory-preset values is performed.
∗ 2 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON *
Threshold : Manual Threshold Level
Threshold Level : 0 *
This channel is set up
individually.
[Display in Specific Channel Setting mode]
This mode is entered when the DIG/ANA key is pressed in General Setting mode. In this mode, specific settings can be made for up to 12 channels. For channels that do not have specific settings, the settings of General Setting mode are applied.Display in Specific Channel Setting mode (A picture from the tuner can be viewed using the semitransparent OSD display.)
2. Specific Channel Setting mode
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON *
Threshold : Manual Threshold Level
Threshold Level : 0 *
Individual setting state
Input Channel - [ 1CH]
Sync AGC : ---
Threshold : ------
Threshold Level : --h
[When specific channel settings have NOT been made]
[When specific channel settings have been made]
General Setting data
Specific Channel Setting data
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON *
Threshold : Manual Threshold Level
Threshold Level : 2
Individual setting state
Input Channel - [ 1CH]
Sync AGC : ON
Threshold : Manual Threshhold Level
Threshold Level : 3
∗ : setting is the default.
• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (--).If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are identical to the default settings or those of General Setting mode.
• The channels to be displayed in "Input Channel" are as follows:• In a case of line input: L1-L3,DV• In a case of tuner input: Received channel (a channel to be set in specific channel settings)
895 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S90
Table 2: Key operations in Specific Channel Setting mode (effective only during recording/playback stop)
Key Operation Setting (∗ : Default) Remarks
DIG/ANASwitches cyclically between General Setting mode and Specific Channel Setting mode.
– –
INPUT SELECT,CHANNEL +/–(∗ R)
Switches inputs or channels. – –
2 ×3, ×3 3 (∗ 1) Sets Sync AGC. ON (∗ ) / OFF –
4 CHAPTER SKIP, CHAPTER SKIP ¢
Sets Threshold.
(∗ ) NormalAuto Threshold LevelManual Threshold LevelPedestal Level
–
e STILL STEP, STILL STEP E
Sets Threshold level.
According to the setting of Threshold, the values can be changed within the range mentioned below.
–
• Normal: The value is fixed, with no display of the value.
–
• Auto Threshold Level: 0-8 (Default: 0)
The value can be changed with the e or E key.
• Manual Threshold Level: 0-8 (Default: 0)
The value can be changed with the e or E key.
• Pedestal Level: 0-8 (Default: 0)
The value can be changed with the e or E key.
PLAY
All channels assigned to have specific settings are canceled, and the specific settings are reset to their default values.
–Settings of General Setting mode are not affected.
CLEAR
If the channel currently selected is assigned to have specific settings, that assignment is canceled.(If that channel is canceled, the number of remaining channels for which specific channel settings can be made increases by 1.)
–
Pressing the key resets the settings of Specific Channel Setting mode for that channel to the initial values. Settings of General Setting mode are not affected.
PAUSE
The specific-setting data for the currently selected channel are reset to their default values.(But the assignment of a channel having specific settings is not canceled.)
–
Pressing the key resets the settings of Specific Channel Setting mode for that channel to the initial values. Settings of General Setting mode are not affected (retained).
ESCExits AVIO setting for specific areas, clearing the OSD.
– –
∗ R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
• Settings made will not be reset to the default settings even if resetting to the factory-preset values is performed.• Screen display when Specific Channel settings are made on 12 (maximum) channels: In such a case. If a channel which does not have
specific settings is selected, the individual setting state for that channel is not displayed, as shown in the figure below, and the settings cannot be modified. In such a case, if you wish to make Specific Channel Settings for the currently selected channel, you must clear the Specific Channel Settings for one or more channels beforehand.
AVIO Specific Area Mode
Input - [ TUNER ]
Sync AGC : ON *
Threshold : Manual Threshold Level
Threshold Level : 3
Individual setting state
Sorry !
You can store only 12 channels
for Specific Area mode.
[With 12 channels having specific settings, when the currently selected channel does not have specific settings]
915 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S92
7.1.6 SETUP SEQUENCE
DVD-R/RW DriveTuner/FL U-com System Codec IC (Inital Program Loader)
System Codec IC (Firmware)
Connect power cord.
Tuner/FL microcomputer starts up.
System microcomputer starts up.
Initialization of peripheral-circuit register, RAM, etc.
Initialization of peripheral-circuit register, RAM, etc.
Starting communication with Tuner/FL microcomputer Request for power off of
system-control computer made to Tuner/FL microcomputer
System-control computer is turned off (entering standby) following request from Tuner/FL microcomputer
Repair process
Playback
Clock indication on FL display
Power ON ?
Waiting for communication to be
established
Is ID check of drive OK?
Is disc in?
Obtaining LD temperature data from drive.
Is temperature below 62°C?
LSI Check
No
No
Yes
Yes
Power ON, cancellation of reset
OK
NG
NG
NG
Has command arrived?
Yes
NoFLASH Check
OK
OK
"POWER ON" displayed on FL display
Key-input and channel data transmitted to the system-control computer, and responding to instructions from it, indication displayed on FL display and channel switching performed
Firmware stored in Flash memory is developed in SD-RAM.
Yes
Is disc valid?
Yes
Repair required?
Yes
Yes
No
No
No
NoPlayback requested?
Yes
Stop
Tray Open
Jumping to developed firmware
Downloading through RS232C required."MONITOR" displayed on FL display
LSI NG displayed on FL display
Drive microcomputer starts up.
ATA/ATAPI command processing
Initialization of peripheral-circuit register, RAM, etc.
No
"CPRM ERR" displayed on FL display
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
7.1.7 DISASSEMBLY
1 Remove the bonnet by removing the eight screws.
2 Press the STANDBY/ON button to turn on the power.
3 Press the 0 button to open the tray.
5 Press the 0 button to close the tray.
4 Remove the tray panel assy.
Bonnet S, Tray Panel Assy1
1 Remove the two screws.
2 Remove the four hooks.
3 Remove the front panel section.
Front Panel Section2
1 Remove the one screw.
2 Remove the three screws.
3 Remove the HDD stay.
HDD Stay3
3
3
5
1
4
1
2
3
Tray panel assy
Front panel section
long thin pole
HDD stay
Emergency eject hole
Jack door
6 Press the STANDBY/ON button to turn off the power.
62
53
How to open the tray when the power cannot be on
When the player cannot eject disc tray due to power failure or any other reasons, open the jack door, and use a long thin pole and push the emergency eject hole under the tray panel to eject.
1
2
2
2
2
2
2
Note: This photograph shows other models. However, the work method is the same.
Note: This photograph shows other models. However, the work method is the same.
935 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S94
1 Remove the two screws.
2 Remove the five screws.
3 Disconnect the connector.
4 Remove the DRIVE Assy R6.
DRIVE Assy R64
4
1 11 1
3 2
1 1
2
3
2
222
1 Remove the four screws.
2 Disconnect the flexible cable from DVJB Assy.
3 Stand the MAIN Assy.
DRIVE Assy R6
CN2009
DRIVE Assy R6
POWER SUPPLY Unit
TUJB Assy
FRJB Assy
Insulation sheet
IC1001
MAIN Assy
DVJB Assy
MAIN Assy
MAIN Assy5
1 Insert the insulation sheet between the MAIN Assy and chassis.
2 Arrange the unit as shown in the photo below.
Caution: MAIN IC (IC1001) on the MAIN Assy generate heat to around 80 degrees.Be careful when works.
Diagnosis6
DVJB Assy
1
D
H
B
SCRB AssyI
G
C
Note: This photograph shows other models. However, the work method is the same.
Note: This photograph shows other models. However, the work method is the same.
Note: This photograph shows other mod-els. However, the work method is the same.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
1 Remove the four aluminium tape.
2 Remove the four screws.
5 Remove the bonnet.
6 Remove the clamper holder by removing the four screws.
7 Clean the pickup lens.
3 Remove the one screw.
4 Remove the front bezel by removing the two hooks.
Hook
Front bezel
Hook
DRIVE Assy R6 (DVD-R/RW WRITER)7
12
1
1
12
2
5BonnetDRIVE Assy R6
Clamper holder
Pickup lens
3
4
4
2
4
6
7
6
6
6
955 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S96
7.2 IC
PD5947A8 (TUJB ASSY : IC2001)• TUFL Microcomputer
PD5947A8, RS5C372A, LC75342M, AK5381VT, PST3428U, PST3809U, NJM2880U1-33, M65672WG-C,UPD72852AGB-8EU, UPD72893AGD-LML, TDA9818TS, LA73026AV
No. Pin Name Signal Name I/O Function Active
1 P95/ANEX0/CLK4 FLCLK O FL Driver communication line CLK −
2 P94/DA1/TB4in SYNC I C-Sync of input video ↑
3 P93/DA0/TB3in AVLINKIN I Input line of NexTViewLink −
4 P92/TB2in/Sout3 IR I Pulse input of remote control −
5 P91/TB1in/Sin3 J_CLOCK I
6 P90/TB0in/CLK3 SYNCAFT I C-Sync of input video ↑
7 BYTE BYTE I
8 CNVss PGM I Communication line
9 P87/XCin NC (O) −
10 P86/XCout NC (O) −
11 -RESET XRESETIN I u-Con Reset
12 Xout XOUT I
13 Vss GND −
14 Xin XIN I
15 Vcc VCC −
16 P85/-NMI NMI I ↓
17 P84/-INT2 JOGA I Phase VOL input ↑ ↓
18 P83/-INT1 SLICEONFB I Feedback from SLICEON pin ↑ ?
19 P82/-INT0 XINTRA I Alarm/interval interruption ↓
20 P81/TA4in NC (O) −
21 P80/TA4out NC (O) −
22 P77/TA3in NC (O) −
23 P76/TA3out FANPWM O FAN power control H
24 P75/TA2in JOGB I Phase VOL input ↑ ↓
25 P74/TA2out NC (O) −
26 P73/-CTS2/-RTS2/TA1in IICRST O Reset output to I2C microcomputer L
27 P72/CLK2/TA1out AVLINKOUT O Output line of NextViewLink H
28 P71/RxD2/SCL/TA0in/TB5in SCL I/O I2C communication (clock) −
29 P70/TxD2/SDA/TA0out SDA I/O I2C communication (data) −
30 Vss2 GND −
31 LP2 LP2 O
32 LP3 LP3 O
33 LP4 LP4 O
34 Vdd2 VDD2 −
35 M2 M2 I Mode switch
36 M1 M1 I
37 P11/SLICEON SLICEON O Slicer operating signal H?
38 P67/TxD1 TXD O Communication line for firmware download/monitor −
39 P66/RxD1 RXD I Communication line for firmware download/monitor −
40 P65/CLK1 SCLK (O) Communication line for firmware download/monitor −
Pin Function
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
List of IC
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
No. Pin Name Signal Name I/O Function Active
41 P64/-CTS1/-RTS1/CLKS1 BUSY O Communication line for firmware download/monitor −
42 P63/TxD0 SSTTOM O SYS controller communication line (Tuner → Main) −
43 P62/RxD0 SSMTOT I SYS controller communication line (Main → Tuner) −
44 P61/CLK0 SCK I SYS controller communication line (clock) ↑
45 P60/-CTS0/-RTS0 HSTTOM O Tuner → SYS handshake L
46 P57/-RDY/CLKout DLCONT O Voltage supply SW of FLASH-ROM writing L
47 P56/ALE WRT O Write signal H
48 P55/-HOLD SDAEEP I/O SDA line for EEPROM −
49 P54/-HLDA SCLEEP O SCL line for EEPROM −
50 P53/BCLK VOLCE O Communication line CE H
51 P52/-RD VOLDATA O Communication line DATA −
52 P51/-WRH/-BHE VOLCLK O Communication line CLK −
53 P50/-WRL/-WR DLCE I Signal for serial I/O mode selection −
54 P47/-CS3 S1 O
55 P46/-CS2 LET O Letterbox signal add H
56 P45/-CS1 SQU O Squeeze signal add −
57 P44/-CS0 BLANK I BLANK signal input −
58 P43/A19 XTHROU O Through control of SCART1/2 L
59 P42/A18 NC (O) −
60 P41/A17 SEL1 O Parallel control (for audio switch) −
61 P40/A16 SWVION O Independent source SW for video I/O output circuit H
62 P37/A15 SWSTBY O Standby mode of video input selector H
63 P36/A14 BS15ON O
64 P35/A13 BS15SRT I
65 P34/A12 SCTHRU O SCART loop through control during power OFF L
66 P33/A11 BS15IN I
67 P32/A10 SDET3 I S terminal detection of Video input 3 L
68 P31/A9 SDET2 I
−
−
S terminal detection of Video input 2 L
69 Vcc VCC
70 P30/A8 SDET1 I S terminal detection of Video input 1 L
71 Vss GND
72 P27/A7 SELV1 O Parallel control −
73 P26/A6 SELV2 O Parallel control −
74 P25/A5 SELV3 O Parallel control −
75 P24/A4 YVSEL O CVBS/YC switch of Video input selector −
76 P23/A3 P_SAVEBS O RF through output switch H
77 P22/A2 FOMO O −
78 P21/A1 M1ONTA O −
79 P20/A0 P_CONT O System Power ON H
80 P17/D15/-INT5 NC (O) −
975 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S98
No. Pin Name Signal Name I/O Function Active
81 P16/D14/-INT4 HSMTOT I SYS → Tuner handshake ↓
82 P15/D13/-INT3 DCTRI I Change detection of audio condition ↑
83 P14/D12 MUTE O MUTE control H
84 P13/D11 SU/SAPID I
85 P12/D10 ST/STID I
86 P11/D9 XRESET O System Reset output L
87 P10/D8 LDASH O ColorSystem distinction signal H
88 P07/D7 STBYQ O EU multiplex decoder standby mode L
89 P06/D6 LM/ O ColorSystem distinction signal H
90 P05/D5 I/BG O ColorSystem distinction signal H
91 P04/D4 XP_SAVE O Power save control (SCART) L
92 P03/D3 TUON O Tuner power H
93 P02/D2 YCSW O
94 P01/D1 RSTCTL O Reset signal mask from the system controller L
95 P00/D0 FLPON O FL Driver Power ON H
96 P107/AN7/-KI3 MODEL1 A/D IN Input for destination judgment −
97 P106/AN6/-KI2 MODEL2 A/D IN Input for destination judgment −
98 P105/AN5/-KI1 AGC A/D IN Field intensity detection −
99 P104/AN4/-KI0 FUNC A/D IN Function signal input −
100 P103/AN3 KEY2 A/D IN Main unit key input −
101 P102/AN2 KEY1 A/D IN Main unit key input −
102 P101/AN1 C/N A/D IN −
103 Avss GND
104 P100/AN0 AFT A/D IN AFT voltage input −
105 VREF VREF
106 AVcc AVCC
107 P97/-ADTRG/Sin4 FLSTB O
−
−
−
−
−
−
−
I
Communication line strobe of FL driver L
108 Vdd1 VDD1
109 SYNCIN SYNCTEXT I Video input for sync. sep.
110 SVREF SLICE I Slice level input
111 Vss1 GND
112 Vdd3 VDD3
113 CVIN1 CVIN1 I Video input for teletext
114 Vss3 GND
115 FSCIN FSCIN Fsc input
116 P96/ANEX1/Sout4 FLDATA O Communication line data of FL driver −
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
• Real Time Clock IC
32kHz OutputControl
AddressDecoder
AddressResister
I/OControl
OSCDetect
DriverCorrection
Time Counter(SEC, MIN, HOUR, WEEK, DAY, MONTH, YEAR)OSC
OSCIN
DIV
Comparator_B
Comparator_A
Shift ResisterInterrupt Control
Alarm_B Register(WEEK, MIN, HOUR)
Alarm_A Register(WEEK, MIN, HOUR)
7
OSCOUT 6
/INTRA 5
SCL2
VSS4
VDD8
SDA3/INTRB 1
No. Pin Name I/O Function
1 /INTRB O
Interruption output BThe output of 32.768kHz (in 32768Hz crystal use), cycled interrupt for CPU, or output alarm interrupt (ALARM_B). This pin output 32.768kHz when activated power from 0V.Nch open drain output.
2 SCL IShift clock inputSynchronize with this clock, and input and output data from a SDA terminal.Exceed VDD, and can input to 6V.
3 SDA I/OSerial input and outputSynchronize with SCL, and input and output writing data or readout data.Exceed VDD, and can input to 6V. Nch open drain output in the output.
4 VSS − Ground pin
5 /INTRA OInterruption output ACycled interrupt for CPU, or output alarm interruption (ALARM_A, ALARM_B). This pin becomes an OFF state when activated power from 0V. N ch open drain output.
6 OSCOUT O Oscillation circuit output Connect a crystal resonator of 32.768kHz or 32.000kHz between OSCIN and OSCOUT, and constitute oscillation circuit.(component parts of oscillation circuit except crystal resonator have it built-in.)7 OSCIN I Oscillation circuit input
8 VDD − Positive supply input
RS5C372A (TUJB ASSY : IC2271)
Pin Function
Block Diagram
995 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S100
• Electric Volume IC
11
10
L4
LSE
LO
9
LIN
8
LTR
E
7
LBA
SS
1
8
LBA
SS
2
5
4
LOU
T
TEST
2 CE
3 VSS
1 DI
30 CL
28 Vref
27 NC
29 VDD
12L3
13L2
14L1
15NC
20R4
19R3
18R2
17R1
16NC
21
RS
ELO
22
RIN
23
RT
RE
24R
BA
SS
125
RB
AS
S2
26
RO
UT
ControlCircuit
LogicCircuit
CCBInterface
LVref
RVref
ControlCircuit
No. Pin Name Function No. Pin Name Function1 DI Serial data input for control 16 NC Not connected
2 CE
Chip enable pinData are written in the internal latch by a timing of "H" → "L", and each analog switch works.Data transfer is enabled by "H" level.
17 R1
Input signal pin3 VSS Ground pin 18 R2
4 TESTPin for electronic volume testSet to VSS electric potential.
19 R3
5 LOUT Volume and equalizer output pin 20 R4
6 LBASS2 Capacitor and resistor connection pins for bus bandpass filter
21 RSELO Input selector output pin
7 LBASS1 22 RIN Volume and equalizer input pin
8 LTRECapacitor connection pin for treble bandpass filter
23 RTRECapacitor connection pin for treble bandpass filter
9 LIN Volume and equalizer input pin 24 RBASS1 Capacitor and resistor connection pins for bus bandpass filter10 LSELO Input selector output pin 25 RBASS2
11 L4
Input signal pins
26 ROUT Volume and equalizer output pin
12 L3 27 NC Not connected
13 L2 28 Vref 0.5XVDD voltage generation block
14 L1 29 VDD Power supply pin
15 NC Not connected 30 CL Clock input pin for control
LC75342M (TUJB ASSY : IC2801)
Pin Function
Block Diagram
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
• 96kHz 24 bit ∆∑ ADC
AINL
AINR 1
∆∑Modulator2
AINR ∆∑Modulator1
VCOM
DIF
SCLK
SDTO
LRCK
MCLK
VoltageReference
DecimationFilter
DecimationFilter
Serial I/OInterface
ClockDivider
4
14
10
12
9
11
DGND
8
VD
7
AGND
5
VA
6
PDN
13
CKS0
16
CKS1
3
CKS2
15
AINL 2
CKS1 3
VCOM 4
AGND 5
VA 6
VD 7
DGNS 8
16 CKS0
15 CKS2
14 DIF
13 PDN
12 SCLK
11 MCLK
10 LRCK
9 SDTO
No. Pin Name I/O Function1 AINR I R ch analog input
2 AINL I L ch analog input
3 CKS1 I Mode select 1
4 VCOM O Common voltage output, bias voltage of VA/2 and ADC input
5 AGND − Analog ground
6 VA − Analog power supply, 4.5V to 5.5V
7 VD − Digital power supply, 2.7 to 5.5V (fs = 4k to 48kHz), 3.0 to 5.5V (fs = 48k to 96kHz)
8 DGND − Digital ground
9 SDTO O Audio serial data output, outputs "L" in the power down mode.
10 LRCK I/O Channel clock I/O, outputs "L" by master mode in the power down mode.
11 MCLK I Master clock input
12 SCLK I/O Audio serial data clock, outputs "L" by master mode in the power down mode.
13 PDN I Power down mode "H": power up, "L": power down
14 DIF I Audio interface format, "H" : 24 bit I2S compatibility, "L" : 24 bit MSB justify
15 CKS2 I Mode select 2
16 CKS0 I Mode select 0
AK5381VT (MAIN ASSY : IC3101)
Pin Function
Pin Arrangement (Top view) Block Diagram
1015 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S102
• Reset IC
VDD
VOUT
VOUT 1
Vref
2
1
VSS 4
VDD 2
4 VSS
3 NC
No. Pin Name Function1 VOUT Reset signal output
2 VDD Power supply / voltage detection
3 NC Not connected
4 VSS VSS
PST3428U (MAIN ASSY : IC4003)
Pin Function
Pin Arrangement (Top view) Block Diagram
VDD
OUT
OUT 1
Vref
2
1
GND 4
VDD 2
4 GND
3 NC
No. Pin Name Function1 OUT Reset signal output
2 VDD Power supply / voltage detection
3 NC Not connected
4 GND Ground
• Reset ICPST3809U (MAIN ASSY : IC4005)
Pin Function
Pin Arrangement (Top view) Block Diagram
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
VIN
5 4
1 3
1 : CONTROL (Active High)2 : GND3 : NOISE BYPASS4 : VOUT
5 : VIN
2
5 4
CONTROL
VOUT
3 NOISE BYPASS
BandgapReference
ThermalProtection
1
GND 2
• Regulator ICNJM2880U1-33 (MAIN ASSY : IC4007)
Pin Arrangement (Top view)
Block Diagram
1035 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S104
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE AF AG AH
Buffer Name Main Function RemarksPDIDGZ Input buffer (5V tolerant)
PDUDGZ Input buffer (5V tolerant), pull-up
PDDDGZ Input buffer (5V tolerant), pull-down
PDO04CDG Output buffer, 4mA
PDO08CDG Output buffer, 8mA
PDO0204DGZ Output buffer, 2/4mA
PDO0406DSGZ Output buffer, 4/6mA For SDRAM IF
PDO0406DSGZ×2 Output buffer, 8/12mA For SDRAM IF
PDT0204DGZ 3 state output buffer, 2/4mA
PDB04DGZ Bidirectional buffer, 4mA
PDB08DGZ Bidirectional buffer, 8mA
PDB0204DGZ Bidirectional buffer, 2/4mA
PDB0406DSGZ Bidirectional buffer, 4/6mA For SDRAM IF
• Signal Processing IC for DVD RecorderM65672WG-C (MAIN ASSY : IC1001)
Pin Arrangement (Top view)
I/O buffer list
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
VDD
EDAT
A[23
]ED
ATA[
22]
EDAT
A[20
]ED
ATA[
18]
EDAT
A[16
]EA
DRS[
0]EB
S[0]
ERAS
EDQ
MED
ATA[
6]ED
ATA[
3]ED
ATA[
0]AV
DDAD
8BG
8VR
B8AV
DDAD
8VR
M10
AVDD
AD10
PACK
ETEN
WM
2DTO
[2]
VDD
WM
CLKO
WM
1DTO
[4]
WM
1DTI
[1]
WM
1DTI
[3]
HKEY
PLS
VDD
AB
CD
EF
GH
JK
LM
NP
RT
UV
WY
AA
AB
AC
AD
AE
AF
AG
AH
AB
CD
EF
GH
JK
LM
NP
RT
UV
WY
AA
AB
AC
AD
AE
AF
AG
AH
AT1D
ATA[
12]
EDAT
A[24
]ED
ATA[
25]
EDAT
A[21
]ED
ATA[
19]
EDAT
A[17
]EA
DRS[
1]EB
S[1]
ECS
EWE
EDAT
A[7]
EDAT
A[4]
EDAT
A[1]
AVSS
AD8
GIN
VRT8
DVSS
AD10
CVBS
INVB
GR1
0ST
REAM
WM
2DTQ
[4]
WM
2DTO
[6]
WM
1DTO
[1]
WM
1DTO
[6]
WM
1DTI
[4]
PEDC
TLRE
C656
O[1
]RE
C656
O[3
]
AT1D
ATA[
8]AT
1DAT
A[13
]AT
1DAT
A[15
]ED
ATA[
26]
EDAT
A[29
]ED
ATA[
30]
EADR
S[2]
EADR
S[10
]EA
DRS[
11]
ECAS
EDAT
A[8]
EDAT
A[5]
EDAT
A[2]
DVSS
AD8
CRIN
CIN
VRBD
10VR
T10
NBC1
0SY
NCW
M2D
TO[3
]W
M1D
TO[0
]W
M1D
TO[5
]W
M1D
TI[2
]W
M1D
TI[7
]AC
CCTL
REC6
56O
[2]
AVDD
2DA1
0
AT1D
ATA[
7]AT
1DAT
A[6]
AT1D
ATA[
14]
EDAT
A[27
]ED
ATA2
8]ED
ATA[
31]
EADR
S[4]
EADR
S[6]
EADR
S[8]
ECLK
ENED
ATA[
9]ED
ATA[
11]
EDAT
A[13
]DV
DDAD
8AV
DDAD
8AV
SSAD
8VR
B10
AVSS
AD10
TSRW
WM
2DTO
[0]
WM
2DTO
[7]
WM
1DTO
[2]
WM
1DTI
[0]
WM
1DTI
[6]
AGCC
TLRE
C656
O[5
]YO
UTAV
SS2D
A10
AT1D
ATA[
2]AT
1DAT
A[1]
AT1D
ATA[
5]AT
1DAT
A[10
]AT
1DAT
A[14
]ED
ATA[
3]EA
DRS[
5]EA
DRS[
7]EA
DRS[
9]EC
LKO
EDAT
A[10
]ED
ATA[
12]
EDAT
A[14
]ED
ATA[
15]
AVSS
AD8
DVDD
AD10
VRTD
10TS
CLK
WM
2DTO
[1]
WM
2DTO
[4]
WM
1DTO
[3]
WM
2DTC
[1]
WM
1DTI
[5]
REC6
56O
[0]
COUT
IREF
[1]
ROUT
AVDD
1DA1
0
AT1D
IOW
AT1D
MAC
KAT
1DAT
A[0]
AT1D
ATA[
3]AT
1DAT
A[9]
GND
VDD3
VDD
GND
VDD3
VDD
GND
VDD3
VDD
GND
VDD2
VDD
GND
VDD2
VDD
GND
VDD3
VDD
REC6
56O
[4]
AVDD
1DA1
0BO
UTDV
ACK
DVRE
Q
AT1A
DR[1
]AT
1INT
RQAT
1DIO
RAT
1RES
ETAT
1DAT
A4]
VDD3
VDD3
IREF
[0]
AVSS
1DA1
0RE
C656
O[6
]DV
VIDE
O[0
]DV
VIDE
O[1
]
AT1C
S[0]
AT1C
S[1]
AT1A
DR[0
]AT
1IO
RDY
AT1D
MAR
QVD
DVD
DG
OUT
REC6
56O
[7]
DVVI
DEO
[3]
DVVI
DEO
[4]
PLL2
AVSS
AT2D
ATA[
11]
AT2D
ATA[
12]
AT1D
ATA[
13]
AT2D
ATA[
14]
AT1A
DR[2
]G
NDG
NDDV
VIDE
O[2
]AD
MCL
KIPL
L2AV
DDDV
VCLK
IDV
VIDE
O[7
]
AT2D
ATA[
6]AT
2DAT
A[7]
AT2D
ATA[
8]AT
2DAT
A[10
]AT
2DAT
A[15
]VD
D3VD
D3R6
56CL
KIDV
VIDE
O[5
]RE
C656
I[0]
REC6
56I[1
]RE
C656
I[2]
AT2D
ATA[
1]AT
2DAT
A[2]
AT2D
ATA[
4]AT
2DAT
A[5]
AT2D
ATA[
9]VD
DVD
DDV
VIDE
O[6
]RE
C656
I[3]
REC6
56I[4
]RE
C656
I[6]
REC6
56I[7
]
AT2D
IOW
AT2D
MAR
QAT
2RES
ETAT
2DAT
A[0]
AT2D
ATA[
3]G
NDG
NDG
NDG
NDG
NDG
NDG
NDG
NDRE
C656
I[5]
PXCL
KDV
VCLK
OPL
LRST
TRST
AT2A
DR[2
]AT
2INT
RQAT
2IO
RDY
AT2D
IOR
AT2D
MAC
KVD
D3G
NDG
NDG
NDG
NDG
NDG
NDVD
D3TC
KTD
ITD
OTM
SPL
LON
AT2M
ODE
AT2C
S[0]
AT2C
S[1]
AT2A
DR[0
]AT
2ADR
[1]
VDD
GND
GND
GND
GND
GND
GND
VDD
VIPW
MCS
YNC
TEST
MO
D[0]
TEST
MO
D[1]
TEST
MO
D[2]
RESE
TVD
DDB
ITR
ACE
VDD
GND
GND
GND
GND
GND
GND
GND
VDD
TEST
MO
D[6]
VDD
TEST
MO
D[5]
TEST
MO
D[4]
TEST
MO
D[3]
PCO
PLL3
AVSS
PLL3
AVDD
VMCL
KPL
L1AV
DDVD
D3G
NDG
NDG
NDG
NDG
NDG
NDVD
D3HA
DRS[
28]
HADR
S[29
]HA
DRS[
24]
HADR
S[25
]HA
DRS[
26]
PLL1
AVSS
ADCC
LKO
VDD
DVAM
CLKO
DVAM
CLKI
VDD
GND
GND
GND
GND
GND
GND
GND
HADR
S[27
]HA
DRS[
19]
HADR
S[18
]HA
DRS[
23]
HADR
S[22
]
DACC
LKO
AMCL
K1AM
CLK2
ARDA
TA[1
]AR
DATA
[0]
GND
VDD
HADR
S[15
]HA
DRS[
16]
HADR
S[17
]HA
DRS[
20]
HADR
S[21
]
ARDA
TA[1
4]AR
DATA
[15]
ARDA
TA[4
]AR
DATA
[3]
ARDA
TA[2
]VD
D2VD
D3HD
CS[1
]HD
CS[0
]HC
ASHR
ASHC
LKEN
ARDA
TA[1
1]AR
DATA
[12]
ARDA
TA[1
3]AR
DATA
[6]
ARDA
TA[5
]VD
DG
NDHD
ATA[
7]HD
WE
DQM
WS[
0]DQ
MW
S[1]
HCLK
O
ARDA
TA[1
0]AR
DATA
[9]
ARW
EAR
DQM
[0]
ARDA
TA[7
]G
NDVD
DHD
ATA[
6]HD
ATA[
5]HD
ATA[
4]HD
ATA[
8]HD
ATA[
9]
ARDA
TA[8
]AR
DQM
[1]
ARCS
[0]
ARRA
SAR
CAS
VDD3
VDD3
HADR
S[9]
HDAT
A[2]
HDAT
A[3]
HDAT
A11]
HDAT
A[10
]
ARCL
KOAR
ADRS
[12]
ARAD
RS[1
3]AR
ADRS
[14]
ARCS
[1]
VDD
VDD3
GND
VDD
VDD3
VDD
GND
VDD3
VDD
GND
VDD3
VDD
GND
VDD3
VDD
GND
VDD3
VDD
HADR
S[10
]HD
ATA[
1]HD
ATA[
0]HD
ATA[
12]
HDAT
A[13
]
ARAD
RS[1
1]AR
ADRS
[9]
ARAD
RS[1
]AR
ADRS
[0]
ARAD
RS[1
0]SP
DIFI
ACM
OD[
0]BC
KODV
DADT
[4]
DVDA
ADR[
0]SC
IDAT
A[0]
SPID
ATAO
DDAT
A[11
]DD
ATA[
8]DC
LKO
DADR
S[9]
DADR
S[8]
INT[
7]IN
T[1]
CTS[
2]RT
S[0]
TX[3
]HW
AIT
HCS[
5]HA
DRS[
11]
HADR
S[12
]HD
ATA[
15]
HDAT
A[14
]
ARAD
RS[8
]AR
ADRS
[3]
ARAD
RS[2
]SR
CBCK
ISR
CDAT
AOAC
MO
D[1]
LRCK
ODV
DADT
[3]
DVDA
REQ
SCID
ATA[
1]SP
ICS
DDAT
A[14
]DD
ATA[
12]
DDAT
A[9]
DDQ
M[1
]DA
DRS[
11]
DADR
S[7]
DADR
S[6]
INT[
6]IN
T[2]
CTS[
1]RX
[3]
TX[2
]HD
ACK[
0]VD
DHC
S[0]
HADR
S[13
]HA
DRS[
14]
ARAD
RS[7
]AR
ADRS
[6]
SRCL
RCKI
SRCL
RCKO
DVBC
KAD
ATAI
DVDA
DT[5
]DV
DADT
[1]
DVDA
ACK
VDD
SPID
ATAI
DDAT
A[15
]DD
ATA[
13]
DDAT
A[10
]DW
EDC
SDA
DRS[
10]
DADR
S[5]
DADR
S[4]
INT[
3]SC
LK[0
]CT
S[0]
RX[2
]TX
[1]
HDRE
Q[0
]HC
S[3]
HCS[
2]HA
DRS[
30]
ARAD
RS[5
]AR
ADRS
[4]
SRCB
CKO
SPDI
FOBC
KIDV
DADT
[7]
DVDA
DT[6
]DV
DADT
[0]
SCIC
S[1]
SCIC
LK[1
]SP
ICLK
DDAT
A[2]
DDAT
A[3]
DDAT
A[6]
DDQ
M[0
]DR
ASDB
S[1]
DADR
S[1]
DADR
S[2]
INT[
4]SC
LK[1
]RT
S[3]
RTS[
2]RX
[1]
HDAC
K[1]
HOE
HCS[
4]HC
S[1]
VDD
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1SR
CDAT
AIDV
LRCK
DVAD
ATA
LRCK
IAD
ATAO
DVDA
DT[2
]DV
DAAD
R[1]
SCIC
S[0]
SCIC
LK[0
]DD
ATA[
0]DD
ATA[
1]DD
ATA[
4]DD
ATA[
5]DD
ATA[
7]DC
ASDB
S[0]
DADR
S[0]
DADR
S[3]
INT[
5]IN
T[0]
CTS[
3]RT
S[1]
RX[0
]TX
[0]
HDRE
Q[1
]NC
NC
VDD
VDD3
GND
: 1.2
V P
ower
sup
ply
: 3.3
V P
ower
sup
ply
: Gro
und
Pin Name list
1055 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S106
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
1 VDD3 VDD3 − 3.3V I/O power supply 56 V26 VRT10 −2 GND GND − Ground 57 V28 VRM10 −3 VDD VDD − 1.2V LOGIC power supply 58 U25 VRB10 −4 AH28 VDD − 1.2V LOGIC power supply 59 U26 VRBD10 −5 AF26 ACCCTL O 60 U27 DVSSAD10 −6 AF27 PEDCTL O VIDEO-Analog, Output buffer 61 T24 DVDDAD10 −7 AG28 HKEYPLS O VIDEO-Analog, Output buffer 62 GND GND − Ground
8 GND GND − Ground 63 VDD VDD − 1.2V LOGIC power supply
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
9 AE26 WM1DTI[7] I/O WM/VWM, Bidirectional buffer 64 U28 AVDDAD8 −10 AD25 WM1DTI[6] I/O WM/VWM, Bidirectional buffer 65 T25 AVSSAD8 −11 AC24 WM1DTI[5] I/O WM/VWM, Bidirectional buffer 66 T26 CIN I
12 AE27 WM1DTI[4] I/O WM/VWM, Bidirectional buffer 67 T27 VRT8 −13 AF28 WM1DTI[3] I/O WM/VWM, Bidirectional buffer 68 T28 VRB8 −14 AD26 WM1DTI[2] I/O WM/VWM, Bidirectional buffer 69 R25 AVDDAD8 −15 AE28 WM1DTI[1] I/O WM/VWM, Bidirectional buffer 70 R24 AVSSAD8 −16 AC25 WM1DTI[0] I/O WM/VWM, Bidirectional buffer 71 R26 CRIN I
17 AB24 WM1DTO[7] I/O WM/VWM, Bidirectional buffer 72 R28 BG8 −18 VDD VDD − 1.2V LOGIC power supply 73 P28 AVDDAD8 −19 GND GND − Ground 74 P27 AVSSAD8 −20 AD27 WM1DTO[6] I/O WM/VWM, Bidirectional buffer 75 R27 GIN I
21 AC26 WM1DTO[5] I/O WM/VWM, Bidirectional buffer 76 P26 DVSSAD8 −22 AD28 WM1DTO[4] I/O WM/VWM, Bidirectional buffer 77 P25 DVDDAD8 −23 AA24 WM1DTO[3] I/O WM/VWM, Bidirectional buffer 78 GND GND − Ground
24 AB25 WM1DTO[2] I/O WM/VWM, Bidirectional buffer 79 P24 EDATA[15] I/O SDRAM ENC, Bidirectional buffer
25 VDD VDD − 1.2V LOGIC power supply 80 VDD3 VDD3 − 3.3V I/O power supply
26 AC27 WM1DTO[1] I/O WM/VWM, Bidirectional buffer 81 N28 EDATA[0] I/O SDRAM ENC, Bidirectional buffer
27 GND GND − Ground 82 N27 EDATA[1] I/O SDRAM ENC, Bidirectional buffer
28 AC28 WMCLKO O WM/VWM, Output buffer 83 N26 EDATA[2] I/O SDRAM ENC, Bidirectional buffer
29 VDD3 VDD3 − 3.3V I/O power supply 84 VDD VDD − 1.2V LOGIC power supply
30 AB26 WM1DTO[0] I/O WM/VWM, Bidirectional buffer 85 N25 EDATA[13] I/O SDRAM ENC, Bidirectional buffer
31 AA25 WM2DTO[7] O WM/VWM, Output buffer 86 GND GND − Ground
32 AB27 WM2DTO[6] O WM/VWM, Output buffer 87 M28 EDATA[3] I/O SDRAM ENC, Bidirectional buffer
33 AB28 VDD − 1.2V LOGIC power supply 88 GND GND − Ground
34 Y24 WM2DTO[5] O WM/VWM, Output buffer 89 N24 EDATA[14] I/O SDRAM ENC, Bidirectional buffer
35 AA27 WM2DTO[4] O WM/VWM, Output buffer 90 M27 EDATA[4] I/O SDRAM ENC, Bidirectional buffer
36 AA26 WM2DTO[3] O WM/VWM, Output buffer 91 M26 EDATA[5] I/O SDRAM ENC, Bidirectional buffer
37 AA28 WM2DTO[2] O WM/VWM, Output buffer 92 VDD3 VDD3 − 3.3V I/O power supply
38 W24 WM2DTO[1] O WM/VWM, Output buffer 93 M25 EDATA[11] I/O SDRAM ENC, Bidirectional buffer
39 GND GND − Ground 94 L28 EDATA[6] I/O SDRAM ENC, Bidirectional buffer
40 Y25 WM2DTO[0] O WM/VWM, Output buffer 95 L27 EDATA[7] I/O SDRAM ENC, Bidirectional buffer
41 GND GND − Ground 96 VDD VDD − 1.2V LOGIC power supply
42 Y26 SYNC I/O TS OUT, Bidirectional buffer 97 M24 EDATA[12] I/O SDRAM ENC, Bidirectional buffer
43 Y27 STREAM I/O TS OUT,Bidirectional buffer 98 GND GND − Ground
44 Y28 PACKETEN I/O TS OUT,Bidirectional buffer 99 L26 EDATA[8] I/O SDRAM ENC, Bidirectional buffer
45 VDD3 VDD3 − 3.3V IO power supply 100 GND GND − Ground
46 W25 TSRW O TS OUT,Output buffer 101 L25 EDATA[9] I/O SDRAM ENC, Bidirectional buffer
47 GND GND − Ground 102 K28 EDQM O SDRAM ENC, Output buffer
48 V24 TSCLK O TS OUT,Output buffer
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
103 K27 EWE O SDRAM ENC, Output buffer
49 VDD3 VDD3 − 3.3V I/O power supply 104 VDD3 VDD3 − 3.3V I/O power supply
50 W26 NBC10 − 105 K26 ECAS O SDRAM ENC, Output buffer
51 W27 VBGR10 − 106 L24 EDATA[10] I/O SDRAM ENC, Bidirectional buffer
52 W28 AVDDAD10 − 107 K25 ECLKEN O Output buffer, 4/6mA
53 V25 AVSSAD10 − 108 VDD VDD − 1.2V LOGIC power supply
54 V27 CVBSIN I 109 J28 ERAS O SDRAM ENC, Output buffer
55 U24 VRTD10 − 110 GND GND − Ground
Pin Function
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
111 J27 ECS O SDRAM ENC, Output buffer 166 VDD3 VDD3 − 3.3V I/O power supply
112 GND GND − Ground 167 C25 AT1DATA[11] I/O ATAPI-DVD, Bidirectional buffer
113 J26 EADRS[11] O SDRAM ENC, Output buffer 168 D24 AT1DATA[10] I/O ATAPI-DVD, Bidirectional buffer
114 J25 EADRS[8] O SDRAM ENC, Output buffer 169 E23 AT1DATA[9] I/O ATAPI-DVD, Bidirectional buffer
115 GND GND − Ground 170 GND GND − Ground
116 K24 ECLKO O SDRAM ENC, Output buffer 171 A26 AT1DATA[8] I/O ATAPI-DVD, Bidirectional buffer
117 VDD3 VDD3 − 3.3V I/O power supply 172 A25 AT1DATA[7] I/O ATAPI-DVD, Bidirectional buffer
118 H28 EBS[0] O SDRAM ENC, Output buffer 173 B25 AT1DATA[6] I/O ATAPI-DVD, Bidirectional buffer
119 H27 EBS[1] O SDRAM ENC, Output buffer 174 GND GND − Ground
120 H26 EADRS[10] O SDRAM ENC, Output buffer 175 C24 AT1DATA[5] I/O ATAPI-DVD, Bidirectional buffer
121 VDD VDD − 1.2V LOGIC power supply 176 VDD3 VDD3 − 3.3V I/O power supply
122 G28 EADRS[0] O SDRAM ENC, Output buffer 177 E22 AT1DATA[4] I/O ATAPI-DVD, Bidirectional buffer
123 GND GND − Ground 178 VDD VDD − 1.2V LOGIC power supply
124 J24 EADRS[9] O SDRAM ENC, Output buffer 179 D23 AT1DATA[3] I/O ATAPI-DVD, Bidirectional buffer
125 GND GND − Ground 180 A24 AT1DATA[2] I/O ATAPI-DVD, Bidirectional buffer
126 G27 EADRS[1] O SDRAM ENC, Output buffer 181 B24 AT1DATA[1] I/O ATAPI-DVD, Bidirectional buffer
127 H25 EADRS[6] O SDRAM ENC, Output buffer 182 GND GND − Ground
128 G26 EADRS[2] O SDRAM ENC, Output buffer 183 C23 AT1DATA[0] I/O ATAPI-DVD, Bidirectional buffer
129 VDD3 VDD3 − 3.3V I/O power supply 184 D22 AT1RESET O Output buffer,8mA
130 F27 EDATA[17] I/O SDRAM ENC, Bidirectional buffer 185 E21 AT1DMARQ I ATAPI-DVD, Input buffer
131 F28 EDATA[16] I/O SDRAM ENC, Bidirectional buffer 186 GND GND − Ground
132 H24 EADRS[7] O SDRAM ENC, Output buffer 187 B23 AT1DMACK O ATAPI-DVD, Output buffer
133 VDD VDD − 1.2V LOGIC power supply 188 VDD3 VDD3 − 3.3V I/O power supply
134 G25 EADRS[4] O SDRAM ENC, Output buffer 189 A23 AT1DIOW O ATAPI-DVD, Output buffer
135 GND GND − Ground 190 VDD VDD − 1.2V LOGIC power supply
136 F26 EDATA[30] I/O SDRAM ENC, Bidirectional buffer 191 C22 AT1DIOR O ATAPI-DVD, Output buffer
137 GND GND − Ground 192 D21 AT1IORDY I ATAPI-DVD, Input buffer
138 E27 EDATA[19] I/O SDRAM ENC, Bidirectional buffer 193 B22 AT1INTRQ I ATAPI-DVD, Input buffer
139 E28 EDATA[18] I/O SDRAM ENC, Bidirectional buffer 194 GND GND − Ground
140 F25 EDATA[31] I/O SDRAM ENC, Bidirectional buffer 195 E20 AT1ADR[2] O ATAPI-DVD, Output buffer
141 VDD3 VDD3 − 3.3V I/O power supply 196 A22 AT1ADR[1] O ATAPI-DVD, Output buffer
142 E26 EDATA[29] I/O SDRAM ENC, Bidirectional buffer 197 C21 AT1ADR[0] O ATAPI-DVD, Output buffer
143 G24 EADRS[5] O SDRAM ENC, Output buffer 198 GND GND − Ground
144 D28 EDATA[20] I/O SDRAM ENC, Bidirectional buffer 199 B21 AT1CS[1] O ATAPI-DVD, Output buffer
145 VDD VDD − 1.2V LOGIC power supply 200 VDD3 VDD3 − 3.3V I/O power supply
146 D27 EDATA[21] I/O SDRAM ENC, Bidirectional buffer 201 A21 AT1CS[0] O ATAPI-DVD, Output buffer
147 GND GND − Ground 202 VDD VDD − 1.2V LOGIC power supply
148 C28 EDATA[22] I/O SDRAM ENC, Bidirectional buffer 203 E19 AT2DATA[15] I/O ATAPI-HDD, Bidirectional buffer
149 GND GND − Ground 204 D20 AT2DATA[14] I/O ATAPI-HDD, Bidirectional buffer
150 F24 EADRS[3] O SDRAM ENC, Output buffer 205 C20 AT2DATA[13] I/O ATAPI-HDD, Bidirectional buffer
151 E25 EDATA[28] I/O SDRAM ENC, Bidirectional buffer 206 GND GND − Ground
152 D26 EDATA[26] I/O SDRAM ENC, Bidirectional buffer 207 B20 AT2DATA[12] I/O ATAPI-HDD, Bidirectional buffer
153 VDD3 VDD3 − 3.3V I/O power supply 208 A20 AT2DATA[11] I/O ATAPI-HDD, Bidirectional buffer
154 B28 EDATA[23] I/O SDRAM ENC, Bidirectional buffer 209 D19 AT2DATA[10] I/O ATAPI-HDD, Bidirectional buffer
155 C27 EDATA[25] I/O SDRAM ENC, Bidirectional buffer 210 GND GND − Ground
156 B27 EDATA24] I/O SDRAM ENC, Bidirectional buffer 211 E18 AT2DATA[9] I/O ATAPI-HDD, idirectional buffer
157 VDD VDD − 1.2V LOGIC power supply 212 VDD3 VDD3 − 3.3V I/O power supply
158 D25 EDATA[27] I/O SDRAM ENC, Bidirectional buffer 213 C19 AT2DATA[8] I/O ATAPI-HDD, Bidirectional buffer
159 GND GND − Ground 214 VDD VDD − 1.2V LOGIC power supply
160 C26 AT1DATA[15] I/O ATAPI-DVD, Bidirectional buffer 215 B19 AT2DATA[7] I/O ATAPI-HDD, Bidirectional buffer
161 E24 AT1DATA[14] I/O ATAPI-DVD, Bidirectional buffer 216 A19 AT2DATA[6] I/O ATAPI-HDD, Bidirectional buffer
162 GND GND − Ground 217 D18 AT2DATA[5] I/O ATAPI-HDD, Bidirectional buffer
163 A28 VDD − 1.2V LOGIC power supply 218 GND GND − Ground
164 B26 AT1DATA[13] I/O ATAPI-DVD, Bidirectional buffer 219 C18 AT2DATA[4] I/O ATAPI-HDD, Bidirectional buffer
165 A27 AT1DATA[12] I/O ATAPI-DVD, Bidirectional buffer 220 E17 AT2DATA[3] I/O ATAPI-HDD, Bidirectional buffer
1075 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S108
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
221 B18 AT2DATA[2] I/O ATAPI-HDD, Bidirectional buffer 276 VDD3 VDD3 − 3.3V I/O power supply
222 GND GND − Ground 277 C11 AMCLK2 I CLOCK, Input buffer
223 A18 AT2DATA[1] I/O ATAPI-HDD, Bidirectional buffer 278 GND GND − Ground
224 VDD3 VDD3 − 3.3V I/O power supply 279 D11 ARDATA[1] I/O SDRAM-ATAPI, Bidirectional buffer
225 D17 AT2DATA[0] I/O ATAPI-HDD, Bidirectional buffer 280 VDD3 VDD3 − 3.3V I/O power supply
226 VDD VDD − 1.2V LOGIC power supply 281 A10 ARDATA[14] I/O SDRAM-ATAPI, Bidirectional buffer
227 C17 AT2RESET I/O ATAPI-HDD, Bidirectional buffer 282 VDD VDD − 1.2V LOGIC power supply
228 B17 AT2DMARQ I ATAPI-HDD, Input buffer 283 B10 ARDATA[15] I/O SDRAM-ATAPI, Bidirectional buffer
229 E16 AT2DMACK O ATAPI-HDD, Output buffer 284 E11 ARDATA[0] I/O SDRAM-ATAPI, Bidirectional buffer
230 GND GND − Ground 285 C10 ARDATA[4] I/O SDRAM-ATAPI, Bidirectional buffer
231 A17 AT2DIOW O ATAPI-HDD, Output buffer 286 GND GND − Ground
232 D16 AT2DIOR O ATAPI-HDD, Output buffer 287 D10 ARDATA[3] I/O SDRAM-ATAPI, Bidirectional buffer
233 C16 AT2IORDY I ATAPI-HDD, Input buffer 288 A9 ARDATA[11] I/O SDRAM-ATAPI, Bidirectional buffer
234 GND GND − Ground 289 B9 ARDATA[12] I/O SDRAM-ATAPI, Bidirectional buffer
235 B16 AT2INTRQ I ATAPI-HDD, Input buffer 290 GND GND − Ground
236 VDD3 VDD3 − 3.3V I/O power supply 291 C9 ARDATA[13] I/O SDRAM-ATAPI, Bidirectional buffer
237 A16 AT2ADR[2] I/O ATAPI-HDD, Bidirectional buffer 292 E10 ARDATA[2] I/O SDRAM-ATAPI, Bidirectional buffer
238 VDD VDD − 1.2V LOGIC power supply 293 D9 ARDATA[6] I/O SDRAM-ATAPI, Bidirectional buffer
239 E15 AT2ADR[1] I/O ATAPI-HDD, Bidirectional buffer 294 VDD3 VDD3 − 3.3V I/O power supply
240 GND GND − Ground 295 A8 ARDATA[10] I/O SDRAM-ATAPI, Bidirectional buffer
241 D15 AT2ADR[0] I/O ATAPI-HDD, Bidirectional buffer 296 B8 ARDATA[9] I/O SDRAM-ATAPI, Bidirectional buffer
242 VDD VDD − 1.2V LOGIC power supply 297 C8 ARWE O SDRAM-ATAPI, Output buffer
243 C15 AT2CS[1] O ATAPI-HDD, Output buffer 298 VDD VDD − 1.2V LOGIC power supply
244 GND GND − Ground 299 A7 ARDATA[8] I/O SDRAM-ATAPI, Bidirectional buffer
245 B15 AT2CS[0] O ATAPI-HDD, Output buffer 300 E9 ARDATA[5] I/O SDRAM-ATAPI, Bidirectional buffer
246 VDD VDD − 1.2V LOGIC power supply 301 D8 ARDQM[0] O SDRAM-ATAPI, Output buffer
247 A15 AT2MODE I ATAPI-HDD, Input buffer 302 GND GND − Ground
248 GND GND − Ground 303 B7 ARDQM[1] O SDRAM-ATAPI, Output buffer
249 GND GND − Ground 304 C7 ARCS[0] O SDRAM-ATAPI, Output buffer
250 A14 RESET I Input buffer (5V tolerant) 305 VDD3 VDD3 − 3.3V I/O power supply
251 VDD3 VDD3 − 3.3V I/O power supply 306 A6 ARCLKO O SDRAM-ATAPI, Output buffer
252 B14 VDD − 1.2V LOGIC power supply 307 GND GND − Ground
253 C14 DBI I TEST, Input buffer 308 B6 ARADRS[12] O SDRAM-ATAPI, Output buffer
254 GND GND − Ground 309 E8 ARDATA[7] I/O SDRAM-ATAPI, Bidirectional buffer
255 D14 TRACE I TEST, Input buffer 310 D7 ARRAS O SDRAM-ATAPI, Output buffer
256 E14 VDD − 1.2V LOGIC power supply 311 VDD3 VDD3 − 3.3V I/O power supply
257 A13 PCO O CLOCK, 3 state output buffer 312 A5 ARADRS[11] O SDRAM-ATAPI, Output buffer
258 GND GND − Ground 313 C6 ARADRS[13] O SDRAM-ATAPI, Output buffer
259 B13 PLL3AVSS − 314 B5 ARADRS[9] O SDRAM-ATAPI, Output buffer
260 C13 PLL3AVDD − 315 VDD VDD − 1.2V LOGIC power supply
261 D13 VMCLK I CLOCK, Input buffer 316 E7 ARCAS O SDRAM-ATAPI, Output buffer
262 E13 PLL1AVDD − 317 D6 ARADRS[14] O SDRAM-ATAPI, Output buffer
263 A12 PLL1AVSS − 318 C5 ARADRS[1] O SDRAM-ATAPI, Output buffer
264 VDD3 VDD3 − 3.3V I/O power supply 319 GND GND − Ground
265 B12 ADCCLKO O CLOCK, Output buffer 320 B4 ARADRS[3] O SDRAM-ATAPI, Output buffer
266 GND GND − Ground 321 A4 ARADRS[8] O SDRAM-ATAPI, Output buffer
267 C12 VDD − 1.2V LOGIC power supply 322 A3 ARADRS[7] O SDRAM-ATAPI, Output buffer
268 VDD3 VDD3 − 3.3V I/O power supply 323 GND GND − Ground
269 D12 DVAMCLKO O CLOCK, Output buffer 324 E6 ARCS[1] O SDRAM-ATAPI, Output buffer
270 GND GND − Ground 325 D5 ARADRS[0] O SDRAM-ATAPI, Output buffer
271 A11 DACCLKO O CLOCK, Output buffer 326 C4 ARADRS[2] O SDRAM-ATAPI, Output buffer
272 VDD3 VDD3 − 3.3V I/O power supply 327 VDD3 VDD3 − 3.3V I/O power supply
273 E12 DVAMCLKI I AUDIO CLOCK, Input buffer 328 A2 ARADRS[5] O SDRAM-ATAPI, Output buffer
274 GND GND − Ground 329 B3 ARADRS[6] O SDRAM-ATAPI, Output buffer
275 B11 AMCLK1 I CLOCK, Input buffer 330 B2 ARADRS[4] O SDRAM-ATAPI, Output buffer
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
331 GND GND − Ground 386 VDD VDD − 1.2V LOGIC power supply
332 E5 ARADRS[10] O SDRAM-ATAPI, Output buffer 387 GND GND − Ground
333 D4 SRCBCKI I AUDIO, Input buffer 388 L3 SPIDATAI I/O HOST, Bidirectional buffer
334 VDD3 VDD3 − 3.3V I/O power supply 389 VDD VDD − 1.2V LOGIC power supply
335 C3 SRCLRCKI I AUDIO, Input buffer 390 M5 SPIDATAO I/O HOST, Bidirectional buffer
336 B1 SRCDATAI I AUDIO, Input buffer 391 GND GND − Ground
337 A1 VDD − 1.2V LOGIC power supply 392 L2 SPICLK I/O HOST, Bidirectional buffer
338 GND GND − Ground 393 GND GND − Ground
339 C2 SRCBCKO O AUDIO, Output buffer 394 L1 DDATA[0] I/O SDRAM-DEC, Bidirectional buffer
340 VDD VDD − 1.2V LOGIC power supply 395 VDD3 VDD3 − 3.3V I/O power supply
341 D3 SRCLRCKO O AUDIO, Output buffer 396 M4 DDATA[14] I/O SDRAM-DEC, Bidirectional buffer
342 E4 SRCDATAO O AUDIO, Output buffer 397 M3 DDATA[15] I/O SDRAM-DEC, Bidirectional buffer
343 F5 SPDIFI I AUDIO, Input buffer 398 M2 DDATA[2] I/O SDRAM-DEC, Bidirectional buffer
344 D2 SPDIFO O AUDIO, Output buffer 399 VDD VDD − 1.2V LOGIC power supply
345 C1 DVLRCK I/O AUDIO, Bidirectional buffer 400 N5 DDATA[11] I/O SDRAM-DEC, Bidirectional buffer
346 E3 DVBCK I/O AUDIO, Bidirectional buffer 401 GND GND − Ground
347 D1 DVADATA I/O AUDIO, Bidirectional buffer 402 M1 DDATA[1] I/O SDRAM-DEC, Bidirectional buffer
348 F4 ACMOD[1] I AUDIO, Input buffer 403 GND GND − Ground
349 G5 ACMOD[0] I AUDIO, Input buffer 404 N4 DDATA[12] I/O SDRAM-DEC, Bidirectional buffer
350 E1 LRCKI I AUDIO, Input buffer 405 N3 DDATA[13] I/O SDRAM-DEC, Bidirectional buffer
351 E2 BCKI I AUDIO, Input buffer 406 N2 DDATA[3] I/O SDRAM-DEC, Bidirectional buffer
352 GND GND − Ground 407 VDD3 VDD3 − 3.3V I/O power supply
353 F3 ADATAI I AUDIO, Input buffer 408 N1 DDATA[4] I/O SDRAM-DEC, Bidirectional buffer
354 GND GND − Ground 409 P5 DDATA[8] I/O SDRAM-DEC, Bidirectional buffer
355 G4 LRCKO O AUDIO, Output buffer 410 P4 DDATA[9] I/O SDRAM-DEC, Bidirectional buffer
356 VDD VDD − 1.2V LOGIC power supply 411 VDD VDD − 1.2V LOGIC power supply
357 H5 BCKO O AUDIO, Output buffer 412 P3 DDATA[10] I/O SDRAM-DEC, Bidirectional buffer
358 F1 ADATAO O DVD-AUDIO, Output buffer 413 GND GND − Ground
359 F2 DVDADT[7] O DVD-AUDIO, Output buffer 414 P2 DDATA[6] I/O SDRAM-DEC, Bidirectional buffer
360 G2 DVDADT[6] O DVD-AUDIO, Output buffer 415 GND GND − Ground
361 G3 DVDADT[5] O DVD-AUDIO, Output buffer 416 P1 DDATA[5] I/O SDRAM-DEC, Bidirectional buffer
362 J5 DVDADT[4] O DVD-AUDIO, Output buffer 417 R1 DDATA[7] I/O SDRAM-DEC, Bidirectional buffer
363 H4 DVDADT[3] O DVD-AUDIO, Output buffer 418 R2 DDQM[0] O SDRAM-DEC, Output buffer
364 G1 DVDADT[2] O DVD-AUDIO, Output buffer 419 VDD3 VDD3 − 3.3V I/O power supply
365 H3 DVDADT[1] O DVD-AUDIO, Output buffer 420 R3 DWE O SDRAM-DEC, Output buffer
366 H2 DVDADT[0] O DVD-AUDIO, Output buffer 421 VDD VDD − 1.2V LOGIC power supply
367 H1 DVDAADR[1] O DVD-AUDIO, Output buffer 422 R4 DDQM[1] O SDRAM-DEC, Output buffer
368 K5 DVDAADR[0] O DVD-AUDIO, Output buffer 423 GND GND − Ground
369 J4 DVDAREQ I/O DVD-AUDIO, Bidirectional buffer 424 R5 DCLKO O SDRAM-DEC, Output buffer
370 GND GND − Ground 425 VDD3 VDD3 − 3.3V I/O power supply
371 J3 DVDAACK O DVD-AUDIO, Output buffer 426 VDD VDD − 1.2V LOGIC power supply
372 VDD VDD − 1.2V LOGIC power supply 427 T1 DCAS O SDRAM-DEC, Output buffer
373 J2 SCICS[1] I/O HOST, Bidirectional buffer 428 GND GND − Ground
374 VDD3 VDD3 − 3.3V I/O power supply 429 T2 DRAS − SDRAM-DEC, Output buffer
375 J1 SCICS[0] I/O HOST, Bidirectional buffer 430 GND GND − Ground
376 VDD VDD − 1.2V LOGIC power supply 431 T3 DCS O SDRAM-DEC, Output buffer
377 K4 SCIDATA[1] I/O HOST, Bidirectional buffer 432 T4 DADRS[11] O SDRAM-DEC, Output buffer
378 GND GND − Ground 433 U1 DBS[0] O SDRAM-DEC, Output buffer
379 L5 SCIDATA[0] I/O HOST, Bidirectional buffer 434 VDD3 VDD3 − 3.3V I/O power supply
380 K3 VDD − 1.2V LOGIC power supply 435 T5 DADRS[9] O SDRAM-DEC, Output buffer
381 K2 SCICLK[1] I/O HOST, Bidirectional buffer 436 U2 DBS[1] O SDRAM-DEC, Output buffer
382 GND GND − Ground 437 U3 DADRS[10] O SDRAM-DEC, Output buffer
383 K1 SCICLK[0] I/O HOST, Bidirectional buffer 438 VDD VDD − 1.2V LOGIC power supply
384 GND GND − Ground 439 U4 DADRS[7] O SDRAM-DEC, Output buffer
385 L4 SPICS I/O HOST, Bidirectional buffer 440 GND GND − Ground
1095 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S110
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
441 V1 DADRS[0] O SDRAM-DEC, Output buffer 496 VDD VDD − 1.2V LOGIC power supply
442 GND GND − Ground 497 AD4 HDACK[0] O Output buffer, 4mA
443 V2 DADRS[1] O SDRAM-DEC, Output buffer 498 AF1 HDREQ[1] I HOST, Input buffer
444 VDD VDD − 1.2V LOGIC power supply 499 AE3 HDREQ[0] I HOST, Input buffer
445 U5 DADRS[8] O SDRAM-DEC, Output buffer 500 AC5 HWAIT I HOST, Input buffer
446 GND GND − Ground 501 AF2 HOE O HOST, Output buffer
447 V3 DADRS[5] O SDRAM-DEC, Output buffer 502 VDD3 VDD3 − 3.3V I/O power supply
448 VDD3 VDD3 − 3.3V I/O power supply 503 GND GND − Ground
449 V4 DADRS[6] O SDRAM-DEC, Output buffer 504 AE4 VDD − 1.2V LOGIC power supply
450 W1 DADRS[3] O SDRAM-DEC, Output buffer 505 AD5 HCS[5] O HOST, Output buffer
451 W2 DADRS[2] O SDRAM-DEC, Output buffer 506 AG2 HCS[4] O HOST, Output buffer
452 VDD VDD − 1.2V LOGIC power supply 507 AF3 HCS[3] O HOST, Output buffer
453 W3 DADRS[4] O SDRAM-DEC, Output buffer 508 AG3 HCS[2] O HOST, Output buffer
454 GND GND − Ground 509 AH2 HCS[1] O HOST, Output buffer
455 GND GND − Ground 510 GND GND − Ground
456 GND GND − Ground 511 AF4 HCS[0] O HOST, Output buffer
457 V5 INT[7] I/O HOST, Bidirectional buffer 512 VDD VDD − 1.2V LOGIC power supply
458 VDD VDD − 1.2V LOGIC power supply 513 AD6 HADRS[10] I/O HOST, Bidirectional buffer
459 W4 INT[6] I/O HOST, Bidirectional buffer 514 GND GND − Ground
460 Y1 INT[5] I/O HOST, Bidirectional buffer 515 AE5 HADRS[11] I/O HOST, Bidirectional buffer
461 Y2 INT[4] I/O HOST, Bidirectional buffer 516 AG4 HADRS[13] I/O HOST, Bidirectional buffer
462 VDD3 VDD3 − 3.3V I/O power supply 517 AH3 HADRS[30] I/O HOST, Bidirectional buffer
463 Y3 INT[3] I/O HOST, Bidirectional buffer 518 VDD3 VDD3 − 3.3V I/O power supply
464 GND GND − Ground 519 AF5 HADRS[12] I/O HOST, Bidirectional buffer
465 Y4 INT[2] I/O HOST, Bidirectional buffer 520 GND GND − Ground
466 VDD VDD − 1.2V LOGIC power supply 521 AH4 HADRS[14] I/O HOST, Bidirectional buffer
467 W5 INT[1] I/O HOST, Bidirectional buffer 522 AE6 HDATA[1] I/O HOST, Bidirectional buffer
468 AA1 INT[0] I/O HOST, Bidirectional buffer 523 AD7 HADRS[9] I/O HOST, Bidirectional buffer
469 AA2 SCLK[1] I/O HOST, Bidirectional buffer 524 VDD3 VDD3 − 3.3V I/O power supply
470 AA3 SCLK[0] I/O HOST, Bidirectional buffer 525 AG5 HDATA[15] I/O HOST, Bidirectional buffer
471 AB1 CTS[3] I/O HOST, Bidirectional buffer 526 GND GND − Ground
472 GND GND − Ground 527 AH5 HDATA[14] I/O HOST, Bidirectional buffer
473 Y5 CTS[2] I/O HOST, Bidirectional buffer 528 GND GND − Ground
474 GND GND − Ground 529 AF6 HDATA[0] I/O HOST, Bidirectional buffer
475 AA4 CTS[1] I/O HOST, Bidirectional buffer 530 AD8 HDATA[6] I/O HOST, Bidirectional buffer
476 VDD VDD − 1.2V LOGIC power supply 531 AE7 HDATA[2] I/O HOST, Bidirectional buffer
477 AB3 CTS[0] I/O HOST, Bidirectional buffer 532 VDD3 VDD3 − 3.3V I/O power supply
478 AB2 RTS[3] I/O HOST, Bidirectional buffer 533 AG6 HDATA[12] I/O HOST, Bidirectional buffer
479 AC2 RTS[2] I/O HOST, Bidirectional buffer 534 VDD VDD − 1.2V LOGIC power supply
480 AC1 RTS[1] I/O HOST, Bidirectional buffer 535 AH6 HDATA[13] I/O HOST, Bidirectional buffer
481 AA5 RTS[0] I/O HOST, Bidirectional buffer 536 AG7 HDATA[11] I/O HOST, Bidirectional buffer
482 VDD3 VDD3 − 3.3V I/O power supply 537 AF7 HDATA[3] I/O HOST, Bidirectional buffer
483 AB4 RX[3] I/O HOST, Bidirectional buffer 538 GND GND − Ground
484 GND GND − Ground 539 AE8 HDATA[5] I/O HOST, Bidirectional buffer
485 AC3 RX[2] I/O HOST, Bidirectional buffer 540 GND GND − Ground
486 VDD VDD − 1.2V LOGIC power supply 541 AD9 HDATA[7] I/O HOST, Bidirectional buffer
487 AD2 RX[1] I/O HOST, Bidirectional buffer 542 AF8 HDATA[4] I/O HOST, Bidirectional buffer
488 AD1 RX[0] I/O HOST, Bidirectional buffer 543 AH7 HDATA[10] I/O HOST, Bidirectional buffer
489 AB5 TX[3] I/O HOST, Bidirectional buffer 544 VDD3 VDD3 − 3.3V I/O power supply
490 AC4 TX[2] I/O HOST, Bidirectional buffer 545 AG8 HDATA[8] I/O HOST, Bidirectional buffer
491 AD3 TX[1] I/O HOST, Bidirectional buffer 546 VDD VDD − 1.2V LOGIC power supply
492 GND GND − Ground 547 AH8 HDATA[9] I/O HOST, Bidirectional buffer
493 AE1 TX[0] I/O HOST, Bidirectional buffer 548 AE9 HDWE O HOST, Output buffer
494 GND GND − Ground 549 AF9 DQMWS[0] O HOST, Output buffer
495 AE2 HDACK[1] O HOST, Output buffer 550 GND GND − Ground
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
551 AD10 HDCS[1] O HOST, Output buffer 606 AG16 TMS I TEST, nput buffer
552 GND GND − Ground 607 GND GND − Ground
553 AG9 DQMWS[1] O HOST, Output buffer 608 AF16 TDO O TEST, Output buffer
554 VDD3 VDD3 − 3.3V I/O power supply 609 VDD VDD − 1.2V LOGIC power supply
555 AH9 HCLKO O HOST, Output buffer 610 AE16 TDI I TEST, Input buffer
556 GND GND − Ground 611 VDD3 VDD3 − 3.3V I/O power supply
557 AE10 HDCS[0] O HOST, Output buffer 612 AH17 TRST I TEST, Input buffer
558 VDD3 VDD3 − 3.3V I/O power supply 613 GND GND − Ground
559 AD11 HADRS[15] I/O HOST, Bidirectional buffer 614 AD16 TCK I TEST, Input buffer
560 VDD VDD − 1.2V LOGIC power supply 615 VDD3 VDD3 − 3.3V I/O power supply
561 AF10 HCAS O HOST, Output buffer 616 AG17 PLLRST I CLOCK, Input buffer
562 AG10 HRAS O HOST, Output buffer 617 GND GND − Ground
563 AH10 HCLKEN O HOST, Output buffer 618 AF17 DVVCLKO O CLOCK, Output buffer
564 GND GND − Groud 619 VDD3 VDD3 − 3.3V I/O power supply
565 AE11 HADRS[16] I/O HOST, Bidirectional buffer 620 AE17 PXCLK O CLOCK, Output buffer
566 GND GND − Ground 621 GND GND − Ground
567 AF11 HADRS[17] I/O HOST, Bidirectional buffer 622 AH18 REC656I[7] I VIDEO-Digital, Input buffer
568 AD12 HADRS[27] I/O HOST, Bidirectional buffer 623 VDD VDD − 1.2V LOGIC power supply
569 AG11 HADRS[20] I/O HOST, Bidirectional buffer 624 AG18 REC656I[6] I VIDEO-Digital, Input buffer
570 VDD3 VDD3 − 3.3V I/O power supply 625 GND GND − Ground
571 AH11 HADRS[21] I/O HOST, Bidirectional buffer 626 AD17 REC656I[5] I VIDEO-Digital, Input buffer
572 VDD VDD − 1.2V LOGIC power supply 627 AF18 REC656I[4] I VIDEO-Digital, Input buffer
573 AE12 HADRS[19] I/O HOST, Bidirectional buffer 628 AE18 REC656I[3] I VIDEO-Digital, Input buffer
574 AF12 HADRS[18] I/O HOST, Bidirectional buffer 629 AH19 REC656I[2] I VIDEO-Digital, Input buffer
575 AG12 HADRS[23] I/O HOST, Bidirectional buffer 630 AG19 REC656I[1] I VIDEO-Digital, Input buffer
576 GND GND − Ground 631 AF19 REC656I[0] I VIDEO-Digital, Input buffer
577 AD13 HADRS[28] I/O HOST, Bidirectional buffer 632 AH20 DVVIDEO[7] I/O VIDEO-Digital, Bidirectional buffer
578 VDD VDD − 1.2V LOGIC power supply 633 AD18 DVVIDEO[6] I/O VIDEO-Digital, Bidirectional buffer
579 AH12 HADRS[22] I/O HOST, Bidirectional buffer 634 AE19 DVVIDEO[5] I/O VIDEO-Digital, Bidirectional buffer
580 GND GND − Ground 635 VDD3 VDD3 − 3.3V I/O power supply
581 AE13 HADRS[29] I/O HOST, Bidirectional buffer 636 AG20 DVVCLKI I CLOCK, Input buffer
582 VDD VDD − 1.2V LOGIC power supply 637 AF20 PLL2AVDD −583 AF13 HADRS[24] I/O HOST, Bidirectional buffer 638 AH21 PLL2AVSS −584 VDD3 VDD3 − 3.3V I/O power supply 639 AD19 R656CLKI I CLOCK, Input buffer
585 AG13 HADRS[25] I/O HOST, Bidirectional buffer 640 GND GND − Ground
586 GND GND − Ground 641 AE20 ADMCLKI I CLOCKl, Input buffer
587 AH13 HADRS[26] I/O HOST, Bidirectional buffer 642 VDD3 VDD3 − 3.3V I/O power supply
588 GND GND − Ground 643 AG21 DVVIDEO[4] I/O VIDEO-Digital, Bidirectional buffer
589 GND GND − Ground 644 AF21 DVVIDEO[3] I/O VIDEO-Digital, Bidirectional buffer
590 AD14 TESTMOD[6] I TEST, Input buffer 645 AD20 DVVIDEO[2] I/O VIDEO-Digital, Bidirectional buffer
591 AE14 VDD − 1.2V LOGIC power supply 646 AH22 DVVIDEO[1] I/O VIDEO-Digital, Bidirectional buffer
592 AF14 TESTMOD[5] I TEST, Input buffer 647 AG22 DVVIDEO[0] I/O VIDEO-Digital, Bidirectional buffer
593 GND GND − Ground 648 AE21 REC656O[7] O VIDEO-Digital, Output buffer
594 AG14 TESTMOD[4] I TEST, Input buffer 649 AF22 REC656O[6] O VIDEO-Digital, Output buffer
595 VDD VDD − 1.2V LOGIC power supply 650 VDD VDD − 1.2V LOGIC power supply
596 AH14 TESTMOD[3] I TEST, Input buffer 651 AH23 DVREQ I VIDEO-Digital, Input buffer
597 GND GND − Ground 652 GND GND − Ground
598 AH15 TESTMOD[2] I TEST, Input buffer 653 AG23 DVACK O VIDEO-Digital, Output buffer
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
599 VDD VDD − 1.2V LOGIC power supply 654 GND GND − Ground
600 AG15 TESTMOD[1] I TEST, Input buffer 655 AE22 AVSS1DA10 −601 GND GND − Ground 656 AD21 GOUT O
602 AF15 TESTMOD[0] I TEST, Input buffer 657 AH24 AVDD1DA10 −603 AE15 CSYNC I CLOCK, Input buffer 658 AF23 BOUT O
604 AD15 VIPWM O CLOCK, Output buffer 659 AE23 AVDD1DA10 −605 AH16 PLLON I TEST, Input buffer 660 AG24 ROUT O
1115 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S112
No. BALLAddress Pin Name I/O Function No. BALL
Address Pin Name I/O Function
661 AD22 IREF[0] − 669 AD23 REC656O[4] O VIDEO-Digital, Output buffer
662 AF24 IREF[1] − 670 AH27 REC656O[3] O VIDEO-Digital, Output buffer
663 AG25 YOUT O 671 AG26 REC656O[2] O VIDEO-Digital, Output buffer
664 AH25 AVSS2DA10 − 672 AG27 REC656O[1] O VIDEO-Digital, Output buffer
665 AE24 COUT O 673 GND GND − Ground
666 AH26 AVDD2DA10 − 674 AD24 REC656O[0] O VIDEO-Digital, Output buffer
VIDEO-Analog667 GND GND − Ground 675 AE25 AGCCTL O
668 AF25 REC656O[5] O VIDEO-Digital, Output buffer
BALLAddress Pin Name BALL
Address Pin Name BALLAddress Pin Name BALL
Address Pin Name
AA23 GND P12 GND AC11 VDD AB23 VDD3
AA6 GND P13 GND AC14 VDD AB6 VDD3
AC12 GND P14 GND AC6 VDD AC10 VDD3
AC17 GND P15 GND AC8 VDD AC13 VDD3
AC20 GND P16 GND L6 VDD AC16 VDD3
AC9 GND P17 GND AC11 VDD AC19 VDD3
F11 GND R12 GND AC14 VDD AC22 VDD3
F14 GND R13 GND AC6 VDD AC7 VDD3
F17 GND R14 GND AC8 VDD F10 VDD3
F20 GND R15 GND L6 VDD F13 VDD3
F23 GND R16 GND P6 VDD F16 VDD3
F8 GND R17 GND U6 VDD F19 VDD3
H6 GND R23 GND Y6 VDD F22 VDD3
J23 GND R6 GND F12 VDD F7 VDD3
M12 GND T12 GND F6 VDD G23 VDD3
M13 GND T13 GND F9 VDD G6 VDD3
M14 GND T14 GND J6 VDD K23 VDD3
M15 GND T15 GND AC15 VDD K6 VDD3
M16 GND T16 GND AC18 VDD N23 VDD3
M17 GND T17 GND AC21 VDD N6 VDD3
M23 GND U12 GND AC23 VDD T23 VDD3
M6 GND U13 GND F15 VDD T6 VDD3
N12 GND U14 GND F18 VDD W23 VDD3
N13 GND U15 GND F21 VDD W6 VDD3
N14 GND U16 GND H23 VDD
N15 GND U17 GND L23 VDD
N16 GND V23 GND P23 VDD
N17 GND V6 GND U23 VDD
Y23 VDD
Others
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
VIDEO-Analog
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
UPD72852AGB-8EU (MAIN ASSY : IC5101)• IEEE1394 Physical IC
Pin Arrangement
DGND 1
SCLK 2
IC (DL) 3
DVDD 4
CTL0 5
CTL1 6
DGND 7
D0 8
D1 9
DVDD 10
D2 11
D3 12
DGND 13
D4 14
D5 15
DGND 16
D6
17
D7
18
SU
S/R
ES
19
DV
DD
20
DG
ND
21
XO
22
XI
23
AG
ND
24
AV
DD
25
PC
026
PC
127
PC
228
IC (
AL)
29
CM
C30
AV
DD
31
CP
S32
48 TpBias1
47 AVDD
46 TpA1p
45 TpA1n
44 TpB1p
43 TpB1n
42 AGND
41 TpBias0
40 AVDD
39 TpA0p
38 TpA0n
37 TpB0p
36 TpB0n
35 AGND
34 RI1
33 AGND
64D
GN
D
63LR
EQ
62F
NS
el
61S
PD
/BD
B
60D
VD
D
59LP
S
58LK
ON
57D
GN
D
56D
VD
D
55R
ES
ET
B
54A
VD
D
53A
GN
D
52A
GN
D
51IC
(A
L)
50D
IRE
CT
49A
GN
D
Block Diagram
30 39
38
CMC TpA0p
TpA0n26PC0
27PC1
28PC2
19SUS/RES
63LREQ
59LPS
50DIRECT
2SCLK
58
32
LKON
LinkInterface
I/O
5CTL0
6CTL1
8D0
9D1
11D2
12D3
14D4
15D5
17D6
18D7
CPS
55RESETB
Arbitrationand
Control StateMachine
Logic
CablePort 0
Receive DataDecoder
andRetimer
Voltageand
CurrentGenerator
Crystal OscillatorPLL System
andTransmit Clock
Generator
Transmit DataEncoder
CablePowerStatus
37
36
TpB0p
TpB0n
46
45
TpA1p
TpA1n
CablePort 1
44
43
TpB1p
TpB1n
41 TpBias0
48 TpBias1
34 RI1
23 XI
22 XO
1135 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S114
Pin Function
• Cable Interface Pins
• Link Interface Pins
No. Pin Name I/O Function
39 TpA0p I/O Port 0 twisted pair cable A positive phase I/O
38 TpA0n I/O Port 0 twisted pair cable A negative phase I/O
37 TpB0p I/O Port 0 twisted pair cable B positive phase I/O
36 TpB0n I/O Port 0 twisted pair cable B negative phase I/O
46 TpA1p I/O Port 1 twisted pair cable A positive phase I/O
45 TpA1n I/O Port 1 twisted pair cable A negative phase I/O
44 TpB1p I/O Port 1 twisted pair cable B positive phase I/O
43 TpB1n I/O Port 1 twisted pair cable B negative phase I/O
19 SUS/RES ISuspend/Resume function select1 : Suspend/Resume on (IEEE1394a-2000 compliant)0 : Suspend/Resume off (P1394a draft 1.3 compliant)
32 CPS I
Cable power statusConnect to the cable through a 390 kΩ resistor and to the GND through a 100 kΩ resistor.0 : Cable power fail1 : Cable power on
No. Pin Name I/O Function
8 D0 I/O Data input/output (bit 0)
9 D1 I/O Data input/output (bit 1)
11 D2 I/O Data input/output (bit 2)
12 D3 I/O Data input/output (bit 3)
14 D4 I/O Data input/output (bit 4)
15 D5 I/O Data input/output (bit 5)
17 D6 I/O Data input/output (bit 6)
18 D7 I/O Data input/output (bit 7)
5 CTL0 I/O Link interface control (bit 0)
6 CTL1 I/O Link interface control (bit 1)
63 LREQ I Link request input
2 SCLK OLink control output clockLPS 1 : 49.152 MHz outputLPS 0 : Clamp to 0 (The clock signal will be output within 25 µsec after change to "0")
59 LPS ILink power status input0 : Link power off1 : Link power on (PHY/Link direct connection)
58 LKON OLink-on signal outputLink-on signal is 6.1444 MHz clock output.
50 DIRECT IPHY/Link isolation barrier control input0 : Isolation barrier1 : PHY/Link direct connection
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
• Control Pins
• IC
No. Pin Name I/O Function
26 PC0 IPower class set inputThis pin status will be loaded to Pwr_class bit which allocated to PHY register 4H.IEEE1394a-2000 chapter [4.3.4.1]
27 PC1 I
28 PC2 I
30 CMC I
Configuration manager capable settingThis pin status will be loaded to Contender bit which allocated to PHY register 4H.0 : Non contender1 : Contender
55 RESETB I
Power on reset inputConnect to GND through a 0.1 µF capacitor.0 : Reset1 : Normal
61 SPD/BDB
IFNSel = 0
Speed select (UPD72852GB)0 : MAX. S2001 : MAX. S400
OFNSel = 1
BIAS Detected output (Logical Inverse)0 : BIAS is coming from some port.1 : BIAS is not coming from any port.
No. Pin Name I/O Function
29, 51 IC (AL) − Internally Connected (Low Clamped)Connected to GND.
3 IC (DL) − Internally Connected (Low Clamped)Connected to GND.
• Power Supply PinsNo. Pin Name I/O Function
25, 31, 40, 47, 54 AVDD − Analog power
24, 33, 35, 42, 49, 52, 53 AGND − Analog GND
4, 10, 20, 56, 60 DVDD − Digital VDD
1, 7, 13, 16, 21, 57, 64 DGND − Digital GND
• Other PinsNo. Pin Name I/O Function
41 TpBias0 O Port 0 twisted pair output
48 TpBias1 O Port 1 twisted pair output
34 RI1 − Resistor connection pin 1 for reference current generatorPlease connect to GND pin through the 9.1 kΩ resistor.
23 XI − Crystal oscillator connection XI
22 XO − Crystal oscillator connection XO
62 FNSel IFunction Select0 : #61 acts as SPD (UPD72852GB compliant)1 : #61 acts as BDB
1155 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S116
UPD72893AGD-LML (MAIN ASSY : IC5202)• IEEE1394 Link IC
Pin Arrangement
RESETB 1PHY_D7 2PHY_D6 3PHY_D5 43.3VDD 5
PHY_D4 6PHY_D3 7PHY_D2 83.3GND 9
PHY_D1 10PHY_D0 11
CTL1 12CTL0 13
2.5VDD 14SCLK 15LREQ 16
LPS 17LINKON 18
STREAM10 19STREAM11 20STREAM12 21STREAM13 22STREAM14 23STREAM15 24STREAM16 25STREAM17 26
PACKETEN1 27TSERROR1 28
TSRW1 29SYNC1 303.3VDD 31
TSSUB1 32PACKETEN2/VSYNC 33TSERROR2/HSYNC 34
3.3GND 35TSRW2/FLD 36
SYNC2 37TSSUB2 382.5GND 39
STREAM20/VD0 40STREAM21/VD1 41STREAM22/VD2 42STREAM23/VD3 43STREAM24/VD4 44STREAM25/VD5 45STREAM26/VD6 46STREAM27/VD7 47
AFS1 48AFS2 49
VCLKI 50VCLKO 513.3VDD 52
VP
WM
53M
D0
54M
D1
553.
3GN
D56
MD
257
MD
358
MD
459
MD
560
MD
661
MD
762
3.3V
DD
63M
D8
64M
D9
65M
D10
662.
5VD
D67
3.3G
ND
68M
D11
69M
D12
70M
D13
71M
D14
72M
D15
73M
WE
74M
CA
S75
MR
AS
76M
CLK
773.
3VD
D78
MA
079
MA
180
MA
281
3.3G
ND
82M
A3
83M
A4
84M
A5
85M
A6
86M
A7
87M
A8
88M
A9
89M
A10
902.
5GN
D91
MA
1192
ALR
CK
93A
BC
K94
3.3V
DD
95P
CM
196
PC
M2
97A
EM
P1
983.
3GN
D99
IC (
O)
100
AM
CLK
O10
1A
PW
M10
2A
MC
LK44
103
AM
CLK
4810
4
A1156BR_MON155IC (PL)154DV_INT153IC (PL)152SCS151RXD150TXD1493.3GND148SCK147SI146SO1452.5GND144P_D15143P_D14142P_D131413.3VDD140P_D12139P_D11138P_D10137P_D9136P_D8135P_D7134P_D6133P_D51323.3GND131P_D4130P_D3129P_D21283.3VDD127P_D1126P_D0125INT124IOCHRDY123IC (O)122IC (H)121IOR120RWZ1192.5VDD118CS117AD10116AD9115AD8114AD7113AD6112AD5111AD4110AD3109AD2108AD1107PSSEL1106PSSEL0105
IFIR
OM
E20
8IC
(L)
207
IC (
L)20
6IC
(L)
205
IC (
PL)
204
IC (
L)20
3H
S_C
LK20
2P
LLD
GN
D20
1P
LLA
GN
D20
0P
LLA
VD
D19
9P
LLD
VD
D19
8IC
(L)
197
D15
196
2.5G
ND
195
D14
194
D13
193
D12
192
D11
191
D10
190
D9
189
3.3G
ND
188
3.3V
DD
187
D8
186
D7
185
D6
184
D5
183
D4
182
D3
181
D2
180
D1
179
D0
178
WR
Z17
7R
DZ
176
A17
175
A16
174
3.3G
ND
173
A15
172
A14
171
2.5V
DD
170
A13
169
A12
168
A11
167
3.3V
DD
166
A10
165
A9
164
A8
163
A7
162
A6
161
A5
160
A4
159
A3
158
A2
157
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
Block Diagram
149
1
76
TXD
150RXD
HostInterface<UART>
RESETB
202HS_CLK
208IFIROME
PH
Y_D
[7 :
0]
CT
L [1
: 0]
15S
CLK
16LR
EQ
17LP
S
18LI
NK
ON
ST
RE
AM
[7 :
0]
TS
RW
PAC
KE
TE
N
SY
NC
TS
SU
B
VD
[7 :
0]
VS
YN
C
HS
YN
C
FLD
117CS
119RWZ
120IOR
123IOCHRDY
AD [10 : 1] 116-107
106, 105
47-40
12, 1
3
143-141, 139-132,130-128, 126, 125
2-4,
6-8
,10
, 11
P_D [15 : 0]
175, 174, 172, 171,169-167, 165-156
196, 194-189,186-178
A [17 : 0]
D [15 : 0]
92, 90-83,81-79 MA [11 : 0]
73-69, 66-64,62-57, 55, 54 MD [15 : 0]
RDZ
124INT
PSSEL [1 : 0]
SystemControl
TestBlock
HostInteface
IEEE1394 Link Core
DV Codec Core
Ext
erna
lF
lash
RO
MIn
terf
ace
SD
RA
MIn
terf
ace
Aud
ioIn
terf
ace
Par
alle
l Int
erfa
ce
StreamInterface
16-bit TimerUnit D
<TMD>CPU Core
High-speedInternal ROM
192 kbytes
151SCS
147SCK
145SO
146176
WRZ177
104
103
102
101
SI
MRAS
EEPROMInterface<CSI>
High-speedInternal ROM
60 kbytes
MemoryController
INTC
77 MCLK
75 MCAS
74 MWE
AMCLK44
AMCLK48
APWM
AMCLKO
97 PCM2
96 PCM1
98 AEMP1
93 ALRCK
94 ABCK
36 TSRW2 / FLD
33 PACKETEN2 / VSYNC
37 SYNC2
34 TSERROR2 / HSYNC
38 TSSUB2
29 TSRW1
27 PACKETEN1
30 SYNC1
28 TSERROR1
32 TSSUB1
50 VCLKI
51 VCLKO
STREAM2 [7 : 0] / VD [7 : 0]
26-19 STREAM1 [7 : 0]
53 VPWM
Selector
Selector
1175 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S118
(1) Link relationNo. Pin Name I/O Function Active
18 LINKON ILink-on signal inputClock inputWhen LPS is active, input 0.
−
17 LPS OLink power status outputLink power OFF : 0Link power ON : 2.7 MHz pulse output (20 dividing of host clock 54 MHz)
−
16 LREQ O Link request output −
15 SCLK IClock input for Link controlLPS is active : 49.152 MHz inputLPS = 0 0 : fixed
−
12, 13 CTL [1 : 0] I/O PHY/Link control signal input/output −2-4, 6-8, 10,11 PHY_D [7 : 0] I/O Data input/output between PHY-Link −
26-19 STREAM1 [7 : 0] I/O ISO data bus of stream interface 1 −27 PACKETEN1 I/O Packet enable signal input/output of stream interface 1 H/L
28 TSERROR1 I/O Packet error signal input/output of stream interface 1 H/L
29 TSRW1 I/O Data read/write enable signal input/output of stream interface 1 −30 SYNC1 I/O Frame synchronous signal input/output of stream interface 1 H/L
32 TSSUB1 I/O Not used Connect to VDD or GND through a resistor. H/L
47-40 STREAM2 [7 : 0] I/O ISO data bus of stream interface 2 −33 PACKETEN2 I/O Packet enable signal input/output of stream interface 2 H/L
34 TSERROR2 I/O Packet error signal input/output of stream interface 2 H/L
36 TSRW2 I/O Data read/write enable signal input/output of stream interface 2 −37 SYNC2 I/O Frame synchronous signal input/output of stream interface 2 H/L
38 TSSUB2 O Not used Set to open. −
(2) Video interface pinsNo. Pin Name I/O Function Active
50 VCLKI I Video clock input (27 MHz) −51 VCLKO O Video clock output (27 MHz) −
47-40 VD [7 : 0] I/O Video data signal −33 VSYNC I/O Video vertical sync. signal L
34 HSYNC I/O Video horizontal sync. signal L
36 FLD I/O Field index signal −53 VPWM O PWM signal for video PLL −
Pin Function
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
(3) Audio interface pinsNo. Pin Name I/O Function Active
104 AMCLK48 I Audio master clock input for sampling frequency 48 kHz −103 AMCLK44 I Audio master clock input for sampling frequency 44 kHz −101 AMCLKO O Audio master clock output −
96 PCM1 I/O
Audio PCM serial dataAt 2ch : System 1 (data of audio block 1)At 4ch : System 1The above is default setting value. Input/output data of PCM 1 and PCM 2 is replaced by Channel swap setting of an AUDIO_FUNC register.
−
97 PCM2 I/O
Audio PCM serial dataAt 2ch : MuteAt 4ch : System 2 (data of audio block 2)The above is default setting value. Input/output data of PCM 1 and PCM 2 is replaced by Channel swap setting of an AUDIO_FUNC register.Note: Cannot use it in DV decode.
−
98 AEMP1 O PCM1 emphasis ON/OFF in PCM 1 output H
93 ALRCK I/OAudio LR clockL ch : HighR ch : Low
−
94 ABCK I/O Audio bit clock −
49, 48 AFS [2 : 1] O
Audio sampling frequencyAFS2 AFS1
44.1 kHz 0 148 kHz 0 032 kHz 1 0
−
102 APWM O PWM signal for audio PLL −
(4) SDRAM interface pinsNo. Pin Name I/O Function Active
77 MCLK O CLK pin connection of SDRAM −76 MRAS O RAS pin connection of SDRAM −75 MCAS O CAS pin connection of SDRAM −74 MWE O WE pin connection of SDRAM −
92, 90-83,81-79
MA [ 11 : 0] O Address pin connection of SDRAM −
73-69, 66-64,62-57, 55, 54
MD [ 15 : 0] I/OData pin connection of SDRAMNote: Process of pull-up or pull down is necessary. So connect it to SDRAM directly.
−
1195 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S120
(a) Parallel interface pins
(5) Host interface pins
No. Pin Name I/O Function Active
117 CS I Chip select input of parallel interface L
119 RWZ IRead and write control input of parallel interfaceISA type bus, SH-1 bus: Write strobe68000 bus : Read/write selection signal
L
120 IOR IIO read control input of parallel interfaceISA type bus, SH-1 bus : Read strobe68000 bus : Data strobe (DS)
L
123 IOCHRDY O Ready output of parallel interface L
116-107 AD [ 10 : 1] I Address input of parallel interface −143-141, 139-132,130-128, 126, 125 P_D [15 : 0] I/O Data input/output of parallel interface −
(b) Serial interface pins
No. Pin Name I/O Function Active
149 TXD I/O Serial transmission data output of unsynchronous serial interface (UART) −150 RXD I/O Serial transmission data input of unsynchronous serial interface (UART) −
(c) Others
No. Pin Name I/O Function Active
124 INT O Interrupt output to the outside H
106, 105 PSSEL [1 : 0] I
Parallel/serial interface selectionInput signal to select the outside interface which of parallel interface or serial interface.
PSSEL [1 : 0] Select00 Serial interface (UART)01 Parallel interface (ISA type bus)10 Parallel interface (68000 bus)11 Parallel interface (SH-1 bus)
−
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
(a) Flash ROM interface pins
(6) External ROM connection pins
No. Pin Name I/O Function Active
196, 194-189,186-178
D [15 : 0] I/OExternal ROM data busData bus in the external ROM access.Process of pull-up or pull down is necessary.
−
175, 174, 172,171, 169-167,
165-156A [17 : 1] O
External ROM address busAddress bus in the external ROM access.Can addressing the 256k byte space.
−
176 RDZ OROM readStrobe signal which shows a read cycle for external ROM.It becomes the inactive in the idle state.
L
177 WRZ OROM writeStrobe signal which shows a write cycle for external ROM.
L
(b) EEPROM interface pins
No. Pin Name I/O Function Active
145 SO I/O Serial transmit data output of clock-synchronous system serial interface (CSI) −146 SI I/O Serial receive data input of clock-synchronous system serial interface (CSI) −147 SCK I/O Clock output of clock-synchronous system serial interface (CSI) −151 SCS I/O Chip select output of clock-synchronous system serial interface (CSI) −
(7) Clock and reset pins
No. Pin Name I/O Function Active
1 RESETB I
ResetRESETB input is asynchronous input. When a signal of fixed low-level width is input without relation to an operation clock, take precedence of all operation, and reset the system. Note: RESETB is low-active.
L
202 HS_CLK I
Host clockClock input pin which is supplied to CPU core and built-in peripheral I/O.Please input 27 MHz clock. Perform 2 multiply with internal PLL by 27 MHz clock, 54 MHz clock is supplied to CPU core and internal peripheral I/O.
−
1215 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S122
(8) Power supply and ground pins
No. Pin Name I/O Function Active
5, 31, 52, 63,78, 95, 127,
140, 166, 1873.3VDD −
3.3V power supply3.3V positive power supply pins. Power supply for 3.3V interface I/O.
−
14, 67,118, 170
2.5VDD −2.5V power supply2.5V positive power supply pins. Power supply for internal each block.
−
39, 91,144, 195
2.5GND
−Ground pinsConnect all GND pins to the common ground.
−
9, 35, 56, 68,82, 99, 131,
148, 173, 1883.3GND −
199 PLLAVDD −Analog power supply for multiply circuitAnalog positive power supply pin for PLL. Supply 2.5V.
−
200 PLLAGND −Analog ground for multiply circuitAnalog ground for PLL
−
198 PLLDVDD −Digital power supply for multiply circuitDigital positive power supply pin for PLL. Supply 2.5V.
−
201 PLLDGND −Digital ground for multiply circuitDigital ground for PLL
−
121 IC (H) −Internally connected pin Connect to VDD directly.
−
197, 203,205-207
IC (L) −Internally connected pin Connect to ground directly.
−
152, 154, 204 IC (PL) −Internally connected pin Connect to ground through a resistor.
−
100, 122 IC (O) −Internally connected pin Set to open.
−
(9) Others
No. Pin Name I/O Function Active
153 DV_INT I/O Interrupt pin to the outside for the DV status read out. H
155 BR_MON I/OShows the bus reset occurred. There is some delay after real bus reset occurred because of set by the built-in firmware.
H
208 IFIROME IROM operation selection inputSet to 1 normally.
−
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
QS
S M
IXE
RIN
TE
RC
AR
RIE
R M
IXE
RA
M D
EM
OD
ULA
TO
RS
IF A
MP
LIF
IER
SIF
AG
C
inte
rcar
rier
mod
e
INT
ER
CA
RR
IER
MO
DE
SW
ITC
HF
M-P
LLD
EM
OD
ULA
TO
R
9
mut
esw
itch
stan
dard
sse
lect
ion
switc
h
CS
AG
CC
de-e
mV
de-e
mC
DE
C
13 FM
inQ
SS
ST
D
123(
1)5
1011
audi
o
vide
oC
VB
S
1 V
(p-
p)
1.1
V (
p-p)
816
2021
1718
197(
1)6
15(1
)4
22
AF
C
AF
2 ×
f pc
L/L
acce
nt s
witc
han
d ad
just
TP
LLC
VA
GC
CB
LT
OP
LAD
JV
CO
2V
CO
1V
PG
ND
VIF
AM
PLI
FIE
RF
PLL
VIF
SA
W
SIF
SA
W24232114
VC
OT
WD
5.5
MH
z
VID
EO
DE
MO
DU
LAT
OR
AN
D A
MP
LIF
IER
SO
UN
DT
RA
P
AF
C
DE
TE
CT
OR
VO
LTA
GE
RE
FE
RE
NC
ET
UN
ER
AG
CT
AG
C
VIF
1
VIF
2
SIF
1
SIF
2
VIF
AG
C
TD
A98
18
MH
A66
3
• VIF/SIF ICTDA9818TS (TUJB ASSY : IC3903)
1235 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S124
PIN FUNCTION
SYMBOL PIN DESCRIPTION
VIF1 1 VIF differential input signal voltage 1
VIF2 2 VIF differential input signal voltage 2
STD 3 standards selection switch; note 1
CVAGC 4 VIF AGC capacitor
CSAGC 5 SIF AGC capacitor
TPLL 6 PLL filter
LADJ 7 L/L accent switch and adjust
AF 8 audio output
Vde-em 9 de-emphasis output
Cde-em 10 de-emphasis input
CDEC 11 decoupling capacitor
QSS 12 single reference QSS/intercarrieroutput voltage
FMin 13 sound intercarrier input voltage
TAGC 14 tuner AGC output
CBL 15 black level detector
CVBS 16 composite video output voltage
AFC 17 AFC output
VCO1 18 VCO1 resonance circuit
VCO2 19 VCO2 resonance circuit
GND 20 ground
VP 21 supply voltage
TOP 22 tuner AGC takeover point adjust
SIF1 23 SIF differential input signal voltage 1
SIF2 24 SIF differential input signal voltage 2
TDA9818
1
2
3
4
5
6
7
8
9
10
11
12
VIF1
VIF2
STD
CVAGC
CSAGC
TPLL
LADJ
AF
Vde-em
Cde-em
CDEC
QSS
SIF2
SIF1
TOP
VP
GND
VCO2
VCO1
AFC
CVBS
CBL
TAGC
FMin
24
23
22
21
20
19
18
17
16
15
14
13
PIN LAYOUT
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
No. Pin Name DC Voltage Function121011151633343637
AIN1RAIN1LAIN2RAIN2LAIN3RAIN3LAIN4LAIN4RAIN5LAIN5R
5.58VAudio input terminal
341935
EXTCTL1EXTCTL2EXTCTL3EXTCTL4
2.5mA, ON →0.75V
OFF →OPEN
5 VOUT
617273238
GNDGNDEXT-75ΩDR-GNDDEC-75Ω-GNDGND
0V
713182328
VIN1VIN2VIN3VIN4VIN5
1.8V
1.10V
Video input terminalSync-tip clampInput/Hi-impedance
General purpose outputOpencollector
Video output terminalPush-pull output/Low-impedance
8 PWRSAV 0.2V Power save mode select pin OPEN : L
9 AUMUTE 0.05V Control terminal for audio muteOPEN : L
Video driver output terminalPush-pull output/Low-impedance
Audio output terminalPush-pull output/Low-impedance
Audio output terminalPush-pull output/Low-impedance
Output terminal of audio muting
FSS control terminal Output H, M, L3 values with serial control
Terminal for Ref_DC ripple removing
Vcc for audio
Confirmed to IIC BUS. Data input terminal
Confirmed to IIC BUS. Clock input terminal
Control Vcc for Video
Always VCC for Video
12 REFFIL 4.94V
14 VCC12
20 FSSOUT H : Vcc-0.5VM : 6VL : 0V
21 DATA
22 CLOCK
24 VCC5A2526
VOUT75AVOUT75B
1.10V
29 VCC5B30314243
AOUT2LAOUT2RAOUT3LAOUT3R
4.91V
3940
AOUT1LAOUT1R
4.91V
4144
PWRMUTE1PWRMUTE2
0V
Pin Function
• Dual SCART Interface ICLA73026AV (SCRB ASSY : IC101)
1255 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S126
Block Diagram
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
7.3 OUTLINE OF THE PRODUCT
Main newly developed technologies
1. PickupThe pickup supports quadruple-speed recording for the DVD-R/RW. A liquid-crystal tilt servo system is adopted for the pickup.
2. Recording-signal-processing LSI• UPD3320GC (DRIVE Assy: IC101)The recording-signal-processing module of conventional models consists of two chips, but this has been integrated into a single newly developed recording-signal-processing LSI, enabling stable performance and cost reduction.
3. AV-signal-processing LSI• M65672WG-B (MAIN Assy: IC1001)The AV-signal-processing module of conventional models consists of eleven chips, but this has been integrated into a single newly developed AV-signal-processing LSI, enabling large-scale cost reduction while maintaining the conventional functions. In the new LSI, all the basic functions necessary for a DVD recorder have been integrated. Like conventional models, this model is designed to support multitasking. The main functions are as follows:• 3-D Y/C separation• Video decoding• Frame TBC• MPEG video encoding• Dolby Digital Consumer Encoding• ATA/ATAPI I/F (2 ch)• Main CPU (32-bit RISC, 54 MHz)• Graphics engine (OSD, scaling, mixing)• MPEG video decoding• Audio decoding (AC-3, MPEG)• Video encoding• Progressive conversion• Audio I/F• 3-D DNR for playback
4. DV-signal-processing LSIThe DV-signal-processing LSI consists of the following two chips:• UPD72862AGB-SEU (MAIN Assy: IC5101)A 400-Mbps two-port PHY LSI in compliance with the IEEE1394a-2000 standards
• UPD72893AGD-LML (MAIN Assy: IC5202)An EEE1394 link controller LSI having DV (digital video) encoding/decoding functions. Encoding/decoding of digital video signals in compliance with the SD specifications (NTSC/PAL) of the DV standard is supported. The 32-bit RISC CPU is built in for controlling the IEEE1394 bus and sending/receiving AV/C commands.
Fig.1 MAIN Assy
IC1001(SIDE B)
IC5202(Side A)
IC5101(Side A)
SIDE BMAIN ASSYD
1275 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S128
System configurationIn each signal-processing LSI of the main function blocks, various processes have been integrated into one chip, which enables simpler system configuration. With the AV-signal-processing LSI at the center, video inputs/outputs, audio inputs/outputs, DV inputs/outputs, writer, HDD, and various memory cells are connected to it.
Fig2. System configuration
1394 (DV)
CVBS/YC/YCbCr
Analog Audio
DIF
Playback
Record
Tuner / LineSelect
IC2001Tuner / FL
ControlCPUIC1001
AV SignalProcessing
LSIDrive Assy(DVD-R/RW)
IC51011394 Phy
IC1102Flash
IC1103SRAM
IC1101, IC1201, IC1301IC1401 SDRAM
IC52021394 Link / DV Codec
FL
Video : IC3301 LA73030Audio : IC2801 LC75342M
IC3101Audio A/DAK5381VT
IC3201Audio D/A
PCM1742KE
UPD72893AGD-LML UPD72852AGB-8EU
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
New functions and specificationsIn this model, the following new functions and specifications have been included in addition to those of conventional models:
1. Improved multitasking functionsThis model supports DVD multitasking (only in VR mode), which was impossible with conventional models.
a Pursuit playbackPlayback of the title being recorded by the DVD drive in VR mode .
b Simultaneous recording/playback Playback of a title other than that being recorded by the DVD drive in VR mode.
2. Advanced disc NAVIIn the conventional disc NAVI function, recorded titles are displayed with still pictures as a list. In the advanced disc NAVI function, the title selected with the cursor is displayed as an animated picture with sound.
3. Improved Still Picture menu in Video modeThe disc NAVI function, which enables displaying a list of recorded titles with still pictures, is enabled in Video mode with this model. Selection from among nine title menus is also supported.
4. Adoption of MPEG2 SIFIn MN1-6 modes, MPEG2 SIF has been adopted, instead of the MPEG1 SIF of conventional models. This enables higher-quality recording for longer hours.
5. Improved editing functionsFor DVD, the original/play-list editing in DVD-VR mode available with conventional models is provided.The automatic-chapter-mark-insertion function in response to a change in audio type (stereo, monaural, bilingual) makes commercial-cutting editing easier.
5. Various-format playbackPlayback of WMA, MP3, and JPEG formats is supported.
6. Other functions and specificationsThe following main functions and specifications adopted with conventional models are also provided with this model:• 192-kHz, 24-bit DAC• 48-kHz, 20-bit ADC• Digital 3-D Y/C separation circuit• Digital frame TBC• 3-D DNR• DV (iLink) input/output• Built-in BS tuner• Playback with commercials skipped
• CD/video-CD playback• Picture creation• Recording with 3/4-D1 and 2/3-D1 resolutions• Recording mode with 32-step MNs• LPCM recording• High-resolution GUI• Progressive output• SRS TruSurround
1295 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S130
7.4 DISC/CONTENT FORMAT
Disc / content format playback compatibility
General disc compatibilityThis recorder was designed and engineered to be compatible with software bearing one or more of the following logos:
Also compatible with KODAK Picture CD
is a trademark of Fuji Photo Film Co. Ltd.
Other formats, including but not limited to the following, are not playable in this recorder:
DVD-Audio / SACD / DVD-RAM
DVD-ROM / CD-ROM*
* Except those that contain WMA, MP3 or JPEG. See also Compressed audio compatibility and JPEG file compatibility below.
DVD-R/RW and CD-R/RW discs recorded using a DVD recorder, CD recorder or personal computer may not be playable in this recorder. This may be caused by a number of possibilities, including but not limited to: the type of disc used; the type of recording; damage, dirt or condensation on either the disc or the pick-up lens. See below for notes about particular software and formats.
DVD-R/RW compatibilityThis recorder will play and record DVD-R/RW discs that use DVD-Video format (Video mode), and DVD-RW discs that use the Video Recording (VR) format. It is compatible with DVD-RW Ver. 1.1 and Ver. 1.1 / 2x, and DVD-R Ver. 2.0 and Ver. 2.0 / 4x.
CD-R/RW compatibilityThis recorder will play CD-R and CD-RW discs recorded in CD Audio or Video CD format, or as a CD-ROM containing MP3, WMA or JPEG files. However, any other content may cause the disc not to play, or create noise/distortion in the output.
This recorder cannot record CD-R or CD-RW discs.
PC-created disc compatibilityIf you record a disc using a personal computer, even if it is recorded in a "compatible format" as listed above, there will be cases in which the disc may not be playable in this recorder due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.
Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.
WMA (Windows Media Audio) compatibility
The Windows Media logo printed on the box indicates that this recorder can playback WMA data.
WMA is short for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 9 (or less) or Windows Media Player for Windows XP.
Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Compressed audio compatibilityThis recorder will play CD-ROM, CD-R, and CD-RW discs containing files saved in the MPEG-1 Audio Layer 3 (MP3) or Windows Media Audio (WMA) format with a sampling rate of 44.1 or 48kHz. Incompatible files will not play and the message Cannot play this file format will be displayed (CAN’T PLAY in the front panel display).
Fixed bit-rate MP3 files are recommended. Variable bit-rate (VBR) MP3 files are playable, but playing time may not be shown correctly.
This recorder is compatible with 44.1 and 48 kHz WMA files encoded with Windows Media Codec 8. Files encoded using Windows Media Codec 9 may be playable, but some parts of the specification are not supported (specifically, Pro, Lossless, Voice and VBR WMA files).
WMA files encoded with DRM (Digital Rights Management) copy protection will not play and the message Cannot play this file format will be displayed (CAN’T PLAY in the front panel display).
DVD-Video DVD-R DVD-RW
Video CD
Fujicolor CD
Audio CD CD-R CD-RW
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
The CD-ROM used to compile your WMA/MP3 files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this recorder.
Use CD-R or CD-RW media for recording your files. The disc must be finalized (i.e. the session must be closed) in order to play in this recorder.
This recorder only plays tracks that are named with the file extension .MP3 or .WMA (upper or lower-case).
When naming MP3 and WMA files, add the corresponding file name extension (.mp3 or .wma). Files are played according to the file extension. To prevent noise and malfunctions, do not use these extensions for other kinds of files.
This recorder can recognize up to 99 folders and 999 files (WMA/MP3). If a disc exceeds these limits, only files and folders up to these limits will be playable. Files and folders are read/displayed in alphabetical order. Note that if the file structure is very complex, you may not be able to read/play all files on the disc.
Folder, track and file names (excluding the file extension) are displayed.
There are many different recording bit-rates available to encode MP3 files. This recorder has been designed to be compatible with all of them. Audio encoded at 128Kbps should sound close to regular CD Audio quality. This recorder will play lower bit-rate files, but please note that the sound quality becomes noticeably worse at lower bit-rates.
JPEG file compatibilityThis recorder is compatible with Fujicolor CD and Kodak Picture CD formats, as well as CD-R/RW/ROM discs containing JPEG files.
Baseline JPEG and EXIF 2.2*1 still image files are supported (horizontal resolution from 160–5120 pixels; vertical resolution between 120–3840 pixels).*1 File format used by digital still cameras
The CD-ROM used to compile your JPEG files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this recorder.
This recorder only displays files that are named with the file extension .jpg, .jpeg, .jif, or .jfif (upper or lower-case).
The recorder can load up to 99 folders and 999 files at one time. If there are more files/folders than this on the disc then more can be reloaded.
1315 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S132
7.5 CLEANING
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:
Position to be cleaned Cleaning tools
Pickup lenses Cleaning liquid : GEM1004Cleaning paper : GED-008
Position to be cleaned Cleaning tools
Fans Cleaning paper : GED-008
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
8. PANEL FACILITIES8.1 FRONT SECTION
1 STANDBY/ONPress to switch the recorder on/into standby.
2 DISC NAVIGATORPress to directly access the Disc Navigator screen.
3 DVD disc tray
4 0 OPEN/CLOSEPress to open/close the disc tray.
5 7 STOPPress to stop playback.
6 8 PAUSEPress to pause/restart playback or recording.
7 3 PLAYPress to start or restart playback.
8 FUNCTIONPress repeatedly to set the function of the SMART JOGdial. The function is shown in the display.
9 SMART JOG dial
10 & STOP RECPress to stop recording.
11 ¶ RECPress to start recording.
12 Front panel inputsPull the cover down where indicated to access the frontpanel input jacks. Especially convenient for connectingcamcorders and other portable equipment.
13 Front panel displaySee Display for details.
14 IR remote sensor
15 DV IN/OUT jackDigital input/output jack for use with a DV camcorder.
1335 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S134
8.2 DISPLAY
1 3 PLAYLights during playback; blinks when paused.
2 ¶ RECLights during recording; blinks when recording is paused.
3 PLLights when a VR mode disc is loaded and the recorder isin Play List mode.
4 2 3Shows the remote control mode (if nothing is displayed,the remote control mode is 1).
5 REMLights when the character display is showing the remaining available recording time.
6 VLights when an unfinalized Video mode disc is loaded.
7 R / RWIndicates the type of recordable DVD loaded: DVD-R orDVD-RW.
8Lights when a timer recording has been set.(Indicator blinks if the timer has been set but there isn't a recordable disc loaded.)AUTOLights when Auto Start Recording has been set, andduring Auto Start Recording.
9 Recording quality indicatorsFINELights when the recording mode is set to FINE(best quality).SPLights when the recording mode is set to SP(standard play).LPLights when the recording mode is set to LP (long play).EPLights when the recording mode is set to EP(extended play).MNLights when the recording mode is set to MN(manual recording level) mode.
10 Character display
11Indicates which channels of a bilingual broadcast are recorded.
12 VPS / PDCLights when receiving a VPS/PDC broadcast during a VPS/PDC-enabled timer recording.
13 NTSCLights when the video output is NTSC format.
14 OVERLights when the analog audio input level is too high.
L R
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
8.3 REAR PART
1 ANTENNA IN/OUTConnect your TV antenna to the ANTENNA IN jack. Thesignal is passed through to the ANTENNA OUT jack forconnection to your TV.
2 AV2/(INPUT 1/DECODER) AV connectorAudio/video input SCART-type connector for connectingto a VCR, or other equipment with a SCART connector.The input accepts video and S-video.
3 AV1(RGB)-TV AV connectorAudio/video output SCART-type connector for connecting to a TV or other equipment with a SCART connector. The video output is switchable between video, S-video and RGB.
4 DIGITAL OUT OPTICALFor connecting to an AV receiver, Dolby Digital/DTS/MPEG decoder or other equipment with optical digital input.
5 CONTROL INUse to control this recorder from the remote sensor of another Pioneer component with a CONTROL OUT terminal and bearing the Pioneer Î mark. Connect the CONTROL OUT of the other component to the CONTROL IN of this recorder using a mini-plug cord.
6 AC IN – Power inlet
7 INPUT 3/AUTO START REC jacksAudio/video inputs (stereo analog audio; video and S-video) that you can use to connect to a satellite receiver, TV, VCR or other source component for recording.
8 OUTPUT jacksAudio/video outputs (stereo analog audio; video and S-video) that you can use to connect to a TV, monitor, AVreceiver or other equipment.
Front panel connections
On the left side of the front panel a flip-down cover hidesa second audio/video input, consisting of a video andS-video jack, and stereo analog audio jacks. (You can alsoconnect a mono source using just the L(MONO) jack.)On the right side is the DV input/output i.LINK connector.This is for connection to a DV camcorder.
1355 6 7 8
1 2 3 4
C
D
F
A
B
E
DVR-3100-S136
8.4 REMOTE CONTROL1 Remote control indicatorLights when setting up the remote control for use with a TV and when setting the remote control mode
2 STANDBY/ONPress to switch the recorder on/into standby.
3 0 OPEN/CLOSEPress to open/close the disc tray.
4 DVD playback functionsAUDIOChanges the audio language or channel. (When therecorder is stopped, press to change the tuner audio.)SUBTITLEDisplays/changes the subtitles included in multilingual DVD-Video discs.ANGLESwitches camera angles on discs with multi-angle scenes.
5 PLAY MODEPress to display the Play Mode menu (for features such as search, repeat and program play).
6 TV/DVDPress to switch between 'TV mode', in which you get the picture and sound from the TV's tuner, and 'DVD mode', in which you get picture and sound from the recorder's tuner (or an external input).
7 Alphanumeric buttons and CLEARUse the number buttons for track/chapter/title selection;channel selection, and so on. The same buttons can alsobe used to enter names for titles, discs and so on.Use CLEAR to clear an entry and start again.
8 INPUT SELECTPress to change the input to use for recording.
9 CHANNEL +/–Press to change the channel of the built-in TV tuner.
10 SHOWVIEW(for WYXU and WY types)Press, then use the number buttons to enter a ShowViewprogramming number for timer recording.
VIDEO Plus+(for WVXU type)Press, then use the number buttons to enter a PlusCodeprogramming number for timer recording.
11 DISC NAVIGATOR / TOP MENUPress to display the Disc Navigator screen, or the top menu if a DVD-Video disc is loaded.
12 PLAY LIST / MENUPress to switch between Original and Play List content onVR mode discs, or display the disc menu if a DVD-Videodisc is loaded.
1 2 3 4
5 6 7 8
C
D
F
A
B
E
DVR-3100-S
13 » / « / | / \ (cursor buttons) and ENTERUsed to navigate all on-screen displays. Press ENTER toselect the currently highlighted option.
14 HOME MENUPress to go display the Home Menu, from which you can navigate all the functions of the recoder.
15 RETURNPress to go back one level in the on-screen menu or display.
16 Playback controls1 REV SCAN / FWD SCAN ¡Press to start reverse or forward scanning. Press again to change the speed.3 PLAYPress to start playback.8 PAUSEPress to pause playback or recording.7 STOPPress to stop playback.CM SKIPPress to skip 30 seconds forward on the disc (about the length of a typical TV commercial); press repeatedly to skip up to 4 minutes.4 PREV / NEXT ¢Press to skip to the previous or next title / chapter / track / folder; or to display the previous or next menupage.e STEP/SLOW EDuring playback, press to start slow-motion playback; while paused, press to show the previous or next video frame.
17 Recording controls¶ RECPress to start recording. Press repeatedly to set therecording time in blocks of 30 mins. & STOP RECPress to stop recording.REC MODEPress repeatedly to change the recording mode (picture quality).TIMER RECPress to set a timer recording from the standard Timer Recording screen.EASY TIMERPress to set a timer recording from the Easy Timerscreen.
18 DISC HISTORYPress to display summary information (disc name,recording time left, etc.) from the last 30 recordablediscs loaded.NAVI MARKPress to select a thumbnail picture for the current title for use in the Disc Navigator screen.
CHP MARKPress to insert a chapter marker when playing/recording a VR mode DVD-RW disc.
19 DISPLAYDisplays/changes the on-screen information displays.
20 TV CONTROLAfter setting up, use these controls to control your TV.
21 TV DIRECT RECPress to start recording whatever channel your TV is set to.
1375 6 7 8