PIONEER CORPORATION 4-1, Meguro 1-chomePIONEER ELECTRONICS (USA) INC. P.O. Box 1760, LoPIONEER EUROPE NV Haven 1087, Keetberglaan 1, 912PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253

PIONEER CORPORATION 2009

DEH-2200UB/XSEW5

, Meguro-ku, Tokyo 153-8654, Japanng Beach, CA 90801-1760, U.S.A.0 Melsele, Belgium Alexandra Road, #04-01, Singapore 159936

ORDER NO.

CRT4455

CD RDS RECEIVER

DEH-2200UB/XSEW5

DEH-2200UBB/XSEW5

DEH-2220UB/XSEW5

DEH-2210UB/XSUR

This service manual should be used together with the following manual(s):

Model No. Order No. Mech. Module Remarks

CX-3269 CRT4488 S11iPod/USB CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly

For details, refer to "Important Check Points for Good Servicing".

K-ZZZ. SEPT. 2009 Printed in Japan

C

D

F

A

B

E

1 2 3 4

SAFETY INFORMATION

Where in a manufacturer’s service documentation, for example in circuit diagrams or listsof components, a symbol is used to indicate that a specific component shall be replaced onlyby the component specified in that documentation for safety reasons, the following symbol shallbe used:

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repaircomplex products such as those covered by this manual.Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do soand refer the repair to a qualified service technician.

CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

WARNING!The AEL (accessible emission level )of the laser power output is less than CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for CLASS 1.A specially instructed person should do servicing operation of the apparatus.

Laser diode characteristicsWave length : 785 nm to 814 nm

Maximum output : 1 190 µW(Emitting period : unlimited)

Additional Laser Caution

Transistors Q101 in PCB drive the laser diodes.When Q101 is shorted between their terminals, the laser diodes will radiate beam.If the top cover is removed with no disc loaded while such short-circuit is continued, the naked eyes may be exposed to the laser beam.

- Safety Precautions for those who Service this Unit. When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results.

Caution: 1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.

CAUTIONCLASS 1M INVISIBLE LASER RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

2. During repair or tests, do not view laser beam for 10 seconds or longer.

DEH-2200UB/XSEW521 2 3 4

C

D

F

A

B

E

5 6 7 8

[Important Check Points for Good Servicing]In this manual, procedures that must be performed during repairs are marked with the below symbol.Please be sure to confirm and follow these procedures.

1. Product safety

Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual.

1 Use specified parts for repair.

Use genuine parts. Be sure to use important parts for safety.

2 Do not perform modifications without proper instructions.

Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as radio/TV interference and foreign noise.

3 Make sure the soldering of repaired locations is properly performed.

When you solder while repairing, please be sure that there are no cold solder and other debris.Soldering should be finished with the proper quantity. (Refer to the example)

4 Make sure the screws are tightly fastened.

Please be sure that all screws are fastened, and that there are no loose screws.

5 Make sure each connectors are correctly inserted.

Please be sure that all connectors are inserted, and that there are no imperfect insertion.

6 Make sure the wiring cables are set to their original state.

Please replace the wiring and cables to the original state after repairs.In addition, be sure that there are no pinched wires, etc.

7 Make sure screws and soldering scraps do not remain inside the product.

Please check that neither solder debris nor screws remain inside the product.

8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.

Damaged power cords may lead to fire accidents, so please be sure that there are no damages.If you find a damaged power cord, please exchange it with a suitable one.

9 There should be no spark traces or similar marks on the power plug.

When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure connections and suitable usage. Please exchange the power cord if necessary.

a Safe environment should be secured during servicing.

When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries. Please pay attention to your surroundings and repair safely.

2. Adjustments

To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.Adjustments should be performed in accordance with the procedures/instructions described in this manual.

4. Cleaning

For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances.

3. Lubricants, Glues, and Replacement parts

Use grease and adhesives that are equal to the specified substance. Make sure the proper amount is applied.

5. Shipping mode and Shipping screws

To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual.

DEH-2200UB/XSEW5 35 6 7 8

C

D

F

A

B

E

1 2 3 4

CONTENTS SAFETY INFORMATION..................................................................................................................................... 21. SERVICE PRECAUTIONS ............................................................................................................................... 5

1.1 SERVICE PRECAUTIONS......................................................................................................................... 51.2 NOTES ON SOLDERING .......................................................................................................................... 6

2. SPECIFICATIONS ............................................................................................................................................ 72.1 SPECIFICATIONS...................................................................................................................................... 72.2 DISC/CONTENT FORMAT ........................................................................................................................ 92.3 PANEL FACILITIES.................................................................................................................................. 102.4 CONNECTION DIAGRAM ....................................................................................................................... 13

3. BASIC ITEMS FOR SERVICE........................................................................................................................ 153.1 CHECK POINTS AFTER SERVICING..................................................................................................... 153.2 PCB LOCATIONS .................................................................................................................................... 163.3 JIGS LIST ................................................................................................................................................ 173.4 CLEANING............................................................................................................................................... 17

4. BLOCK DIAGRAM.......................................................................................................................................... 185. DIAGNOSIS.................................................................................................................................................... 21

5.1 OPERATIONAL FLOWCHART ................................................................................................................ 215.2 ERROR CODE LIST ................................................................................................................................ 225.3 CONNECTOR FUNCTION DESCRIPTION............................................................................................. 24

6. SERVICE MODE ............................................................................................................................................ 256.1 DISPLAY TEST MODE ............................................................................................................................ 256.2 CD TEST MODE...................................................................................................................................... 26

7. DISASSEMBLY............................................................................................................................................... 278. EACH SETTING AND ADJUSTMENT ........................................................................................................... 33

8.1 CD ADJUSTMENT................................................................................................................................... 338.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT.................................................... 34

9. EXPLODED VIEWS AND PARTS LIST.......................................................................................................... 369.1 PACKING ................................................................................................................................................. 369.2 EXTERIOR(1) .......................................................................................................................................... 389.3 EXTERIOR(2) .......................................................................................................................................... 409.4 CD MECHANISM MODULE..................................................................................................................... 42

10. SCHEMATIC DIAGRAM ............................................................................................................................... 4410.1 TUNER AMP UNIT(GUIDE PAGE) ........................................................................................................ 4410.2 KEYBOARD UNIT.................................................................................................................................. 5010.3 CD MECHANISM MODULE(GUIDE PAGE) .......................................................................................... 5210.4 WAVEFORMS........................................................................................................................................ 58

11. PCB CONNECTION DIAGRAM ................................................................................................................... 6211.1 TUNER AMP UNIT................................................................................................................................. 6211.2 KEYBOARD UNIT.................................................................................................................................. 6611.3 CD CORE UNIT(S11USB)..................................................................................................................... 68

12. ELECTRICAL PARTS LIST .......................................................................................................................... 70

DEH-2200UB/XSEW541 2 3 4

C

D

F

A

B

E

5 6 7 8

1. SERVICE PRECAUTIONS1.1 SERVICE PRECAUTIONS

1. You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.2. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on mode may damage the ICs inside the unit.3. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment (shorting-solder) by referring to "the DISASSEMBLY".4. After replacing the pickup unit, be sure to check the grating.5. Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic induction.6. On CD Core Unit, actual cable colors and silk print are different.

7. CD Mech. Assembly Wrong Installation Check If iPod corresponding mech. assembly is installed at iPod non corresponding model, or if iPod non corresponding mech. assembly is installed at iPod corresponding model by mistake, this becomes error indication with CDS, USB sources as shown below;

Judgment condition of wrong installation is as follows;

* The condition becomes as shown above since a microcomputer of corresponding USB mech. assembly and a microcomputer of iPod corresponding mech. assembly are the same. However, this is determined by the presence or absence of authentication IC since problem occurs depending on different mech. assembly.

Wrong Inst. Error ofCD Mech. Assembly C H K C D C O R E

USB Corresponding ModelAuthentication IC: No OKAuthentication IC: Yes Wrong Installation IndicationAuthentication IC: No OKAuthentication IC: Yes Wrong Installation Indication

USB/iPod Corresponding ModelAuthentication IC: No Wrong Installation Indication

Authentication IC: Yes OKAuthentication IC: No Wrong Installation IndicationAuthentication IC: Yes OK

Mech. Assembly

S11 USB Mech.Assembly

S11 USB Mech.Assembly

Mech. Assembly

S11 USB/iPod

S11 USB/iPod

Green Red White Black

DEH-2200UB/XSEW5 55 6 7 8

C

D

F

A

B

E

1 2 3 4

1.2 NOTES ON SOLDERING

For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit. Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs accompanied by reworking of soldering.

Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C. Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of the soldering iron.

Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden).

The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia.

DEH-2200UB/XSEW561 2 3 4

C

D

F

A

B

E

5 6 7 8

2. SPECIFICATIONS2.1 SPECIFICATIONS

Maximum current supply .... 500 mAMinimum memory capacity

.............................................. 256 MBUSB Class ............................. MSC (Mass Storage Class)File system............................. FAT16, FAT32WMA decoding format ....... Ver. 7, 7.1, 8, 9, 10, 11 (2ch

audio)(Windows Media Player)

MP3 decoding format ......... MPEG-1 & 2 Audio Layer 3WAV signal format ................ Linear PCM & MS ADPCM

(Non-compressed)

FM tunerFrequency range .................. 87.5 MHz to 108.0 MHzUsable sensitivity.................. 11 dBf (0.7 μV/75 ohm

, mono, S/N: 30 dB)Signal-to-noise ratio ............ 72 dB (IEC-A network)

MW tunerFrequency range ................. 531 kHz to 1 602 kHzUsable sensitivity................. 25 μV (S/N: 20 dB)Signal-to-noise ratio ........... 62 dB (IEC-A network)

LW tunerFrequency range ................. 153 kHz to 281 kHzUsable sensitivity.................. 28 μV (S/N: 20 dB)Signal-to-noise ratio ............ 62 dB (IEC-A network)

Note

Specifications and the design are subject to mod-ifications without notice.

GeneralPower source .........................14.4 V DC (10.8 V to 15.1 V

allowable)Grounding system................. Negative typeMaximum current consumption

...............................................10.0 A

Dimensions (W × H × D):DIN

Chassis.................. 178 mm × 50 mm × 165mm

Nose ....................... 188 mm × 58 mm × 24 mmD

Chassis.................. 178 mm × 50 mm × 165mm

Nose ....................... 170 mm × 48 mm × 24 mmWeight ..................................... 1.3 kg

AudioMaximum power output ....... 50 W × 4Continuous power output ... 22 W × 4 (50 Hz to 15 000

Hz, 5 % THD, 4 ohm load, bothchannels driven)

Load impedance ................... 4 ohm(4 ohm 8 ohm allowable)

Preout maximum output level................................................ 2.0 V

Tone controls:Bass

Frequency .............. 100 HzGain ......................... ±12 dB

MidFrequency .............. 1 kHzGain ......................... ±12 dB

TrebleFrequency .............. 10 kHzGain ......................... ±12 dB

CD playerSystem.....................................Compact disc audio systemUsable discs ..........................Compact discSignal-to-noise ratio............. 94 dB (1 kHz) (IEC-A net-

work)Number of channels ............ 2 (stereo)WMA decoding format ....... Ver. 7, 7.1, 8, 9, 10, 11 (2ch

audio)(Windows Media Player)

MP3 decoding format ......... MPEG-1 & 2 Audio Layer 3WAV signal format ............... Linear PCM & MS ADPCM

(Non-compressed)

USBUSB standard specification

.............................................. USB 2.0 full speed

Back up current ......................2 mA or less

DEH-2200UB/XSEW5, DEH-2200UBB/XSEW5, DEH-2220UB/XSEW5

DEH-2200UB/XSEW5 75 6 7 8

C

D

F

A

B

E

1 2 3 4

DEH-2210UB/XSUR

DEH-2200UB/XSEW581 2 3 4

C

D

F

A

B

E

5 6 7 8

2.2 DISC/CONTENT FORMAT

DEH-2200UB/XSEW5 95 6 7 8

C

D

F

A

B

E

1 2 3 4

2.3 PANEL FACILITIES

DEH-2200UB/XSEW5, DEH-2200UBB/XSEW5, DEH-2220UB/XSEW5

Head unit

traPtraP

DISP/ / SCRLAUX input jack (3.5mm stereo jack)

SRC/OFF USB port

MULTI-CONTROL(M.C.)

(list)

Disc loading slot 1 to 6

(eject) / / /

TA / AF BAND/ESC

(detach)

CAUTIONUse an optional Pioneer USB cable (CD-U50E) toconnect the USB audio player/USB memory tothe USB port. Since the USB audio player/USBmemory is projected forward from the unit, it isdangerous to connect directly.Do not use the unauthorized product.

Display indication

Indicator State

(disc)The disc (album) name is dis-played.

(artist)The disc (track) artist name is dis-played.

Main dis-play sec-tion

• Tuner: band and frequency• RDS: program service name,

PTY information and other lit-eral information

• Built-in CD player and USB:elapsed playback time andtext information

(song)

The track (song) name is dis-played.A playable audio file has been se-lected while operating the list.

An upper tier of folder or menuexists.

(folder) The list function is operated.

A lower tier of folder or menu ex-ists.

LOC The local seek tuning is on.

LOUD(loudness)

The loudness is on.

(TA) TA function is on.

(TP) A TP station is tuned in.

(AF)AF (alternative frequenciessearch) function is on.

(stereo)The selected frequency is beingbroadcasted in stereo.

(repeat) Track or folder repeat is on.

(ran-dom)

Random play is on.

(sound re-triever)

The sound retriever function ison.

DEH-2200UB/XSEW5101 2 3 4

C

D

F

A

B

E

5 6 7 8

DEH-2210UB/XSUR

DEH-2200UB/XSEW5 115 6 7 8

C

D

F

A

B

E

1 2 3 4

DEH-2200UB/XSEW5121 2 3 4

C

D

F

A

B

E

5 6 7 8

2.4 CONNECTION DIAGRAM

DEH-2200UB/XSEW5, DEH-2200UBB/XSEW5, DEH-2220UB/XSEW5

1*2*

3*4*

ndin

g on

the

kind

of v

ehic

le, t

he fu

nctio

n an

d 4*

may

be

diffe

rent

. In

this

cas

e, b

e o

conn

ect 1

* to

4*

and

3* to

2*.

6C

onne

ct le

ads

of th

e sa

me

colo

r to

eac

h ot

her.

7Y

ello

w (

2*)

Bac

k-up

(or

acce

ssor

y)

8Y

ello

w (

1*)

Con

nect

to th

e co

nsta

nt 1

2 V

su

pply

term

inal

.

9R

ed (

4*)

Acc

esso

ry(o

r ba

ck-u

p)

10R

ed (

3*)

Con

nect

to te

rmin

al c

ontr

olle

d by

ig

nitio

n sw

itch

(12

V D

C).

11B

lack

(ch

assi

s gr

ound

)C

onne

ct to

a c

lean

, pai

nt-f

ree

met

al lo

catio

n.

nnec

tor

vehi

cles

, the

ISO

con

nect

or m

ay b

e in

to tw

o. In

this

cas

e, b

e su

re to

to

bot

h co

nnec

tors

.

13S

peak

er le

ads

Whi

te:F

ront

left

Whi

te/b

lack

:Fro

nt le

ftG

ray:

Fron

t rig

ht

Gra

y/bl

ack:

Fron

t rig

ht

Gre

en:R

ear

left

Gre

en/b

lack

:Rea

r le

ftV

iole

t:R

ear

right

V

iole

t/bla

ck:R

ear

right

14R

ear

outp

ut1

Thi

s pr

oduc

t

2A

nten

naja

ck

3Fu

se (

10 A

)5

Wire

d re

mot

e in

put

Har

d-w

ired

rem

ote

cont

rol a

dapt

or c

an

be c

onne

cted

(so

ld

sepa

rate

ly).

16B

lue/

whi

teC

onne

ct to

sys

tem

con

trol

term

inal

of t

he

pow

er a

mp

(max

. 300

mA

12

V D

C).

17B

lue/

whi

te (

6*)

Con

nect

to a

uto-

ante

nna

rela

y co

ntro

l te

rmin

al (

max

. 300

mA

12

V D

C).

18B

lue/

whi

te (

5*)

The

pin

pos

ition

of t

he IS

O c

onne

ctor

will

di

ffer

depe

ndin

g on

the

type

of v

ehic

le.

Con

nect

5*

and

6* w

hen

Pin

5 is

an

ante

nna

cont

rol t

ype.

In a

noth

er ty

pe o

f ve

hicl

e, n

ever

con

nect

5*

and

6*.

15Y

ello

w/b

lack

If yo

u us

e an

equ

ipm

ent w

ith M

ute

func

tion,

wire

this

lead

to th

e A

udio

Mut

e le

ad o

n th

at

equi

pmen

t. If

not,

keep

the

Aud

io M

ute

lead

fr

ee o

f any

con

nect

ions

.

20C

onne

ct w

ith R

CA

cab

les

(sol

d se

para

tely

)

22S

yste

m r

emot

e co

ntro

l

24R

ight

23Le

ft

25R

ear

spea

ker

25R

ear

spea

ker

26P

erfo

rm th

ese

conn

ectio

ns w

hen

usin

g th

e op

tiona

l am

plifi

er.

19To

Rea

r ou

tput

21P

ower

am

p(s

old

sepa

rate

ly)

DEH-2200UB/XSEW5 135 6 7 8

C

D

F

A

B

E

1 2 3 4

DEH-2210UB/XSUR

DEH-2200UB/XSEW5141 2 3 4

C

D

F

A

B

E

5 6 7 8

3. BASIC ITEMS FOR SERVICE3.1 CHECK POINTS AFTER SERVICING

To keep the product quality after servicing, please confirm following check points.

demrifnocebotmetIserudecorP.oN1 Confirm whether the customer complain has

been solved.If the customer complain occurs with thespecific media, use it for the operation check.

The customer complain must not bereappeared.Display, audio and operations must benormal.

2 CD Play back a CD.(Track search)

No malfunction on display, audio andoperation.

3 FM/AM tuner Check FM/AM tuner action.(Seek, Preset)Switch band to check both FM and AM.

Display, audio and operations must benormal.

4 Check whether no disc is inside the product. The media used for the operating check mustbe ejected.

retfaecnaraeppastinotridrosehctarcsoNkcehcecnaraeppA5receiving it for service.

See the table below for the items to be checked regarding audio:

Item to be checked regarding audioDistortionNoiseVolume too lowVolume too highVolume fluctuatingSound interrupted

DEH-2200UB/XSEW5 155 6 7 8

C

D

F

A

B

E

1 2 3 4

3.2 PCB LOCATIONS

A

B Keyboard Unit

CD Core Unit (S11USB)C

Tuner Amp Unit

A:DEH-2200UB/XSEW5

B:DEH-2200UBB/XSEW5

C:DEH-2220UB/XSEW5

D:DEH-2210UB/XSUR

Unit Number : YWM5445(A)

Unit Number : YWM5447(B)

Unit Number : YWM5446(C)

Unit Number : YWM5448(D)

Unit Name : Tuner Amp Unit

Unit Number : (A)

Unit Number : (B)

Unit Number : (D)

Unit Name : Keyboard Unit

Unit Number : (C)

Unit Name : Keyboard Unit

Unit Number : CWX3776

Unit Name : CD Core Unit(S11USB)

DEH-2200UB/XSEW5161 2 3 4

C

D

F

A

B

E

5 6 7 8

3.3 JIGS LIST

3.4 CLEANING

- Jigs List NameTest DiscL.P.F.

Jig No.TCD-782

RemarksChecking the gratingChecking the grating (Two pieces)

Name Jig No. Remarks

- Grease List NameGreaseGrease

Grease No.GEM1024GEM1045

RemarksCD Mechanism ModuleCD Mechanism Module

Name Grease No. Remarks

Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:

Portions to be cleaned Cleaning tools

CD pickup lenses Cleaning liquid : GEM1004

Cleaning paper : GED-008

DEH-2200UB/XSEW5 175 6 7 8

C

D

F

A

B

E

IN2_L

IN1_L

ICPML

LECTRONSOURCE

VC

K,V

DT

,VS

T

F

ET

L-IN

IFA

IFB

REFA

REFB

LDET

I

CK

CE1

DO

CE2

SLOUT

SYSTEMCOMP

L

D

C

T

IC60PN5

1 2 3 4

4. BLOCK DIAGRAM

PICKUP UNIT(P10.5)(SERVICE)

CD CORE UNIT(S11USB)C

BRST,BRXEN,BSRQ

CN701

Q101

M

LD

MD

S903DSCSNS

SPINDLEMOTOR

MLOADING/CARRIAGEMOTOR

LD-

MD

15

5

HOLOGRAM UNIT

IC301BA5839FP

IC201PE5715A

RF AMP, CD DECODER, MP3&WMA DECODERDIGITAL SERVO/DATA•PROCESSOR

CPU, USB HOST CONTROLLER

ACTUATOR/MOTOR DRIVER

2VD

VD

13LOUT

9

CN101

16 SOP15 SOM18 LCOP17 LCOM

21CLCONT

55LOUT

9CONT

TD,FD

AC,BD,E,F

SD,MD

S901HOME

S9058EJ

LD+ 14

141 LD

142 PD

CONT

CLCONT

HOME9

20

41

VDD

1

VDD

BDATA,BSCK

VDD

15

5

FOCUS ACT.TRACKING ACT.

FOPTOP

21 TOP

FOP

11 FOP14 TOP

21

14

8EJ7

DSCSNS10 16

/RESET 8/RESET

88VREFREFO 133 REFOUT

33FOM FOM

12 FOM

44TOM TOM

13 TOM

22LOEJ LOEJ28

52

50

X201

XTAL

/XTAL16.93MHz

VDSENS11

VD

16

17

DP

DM4

5

DM

DP

2

1

X20548MHz

USBXTAL

/USBXTAL

Q102

39/PUEN

VCC VDD

2

E

TUNL

1

ANT4011

2

CN651

TUNER AMP UNIT

LOUT

ASYS+B

ANTENNA

IFA

IFB

7

VDD3V11

SWVDD3V

SW5V6

5BSENS

SYSPW

PWROF2

1

36

47

15

SWVDD4 1

BRST,BRXEN,BSRQ,BDATA,BSCK

CDRES12

4

3

RESET 16

FM/AM TUNER UNIT

AN

T

SL-

IN

RE

FA

RE

FB

LDE

T

SWVDD3V

DI

CK

CE

1

DO

CE

2

SLO

UT

S

D

CD-Lch

3

REGULATOR ICIC911

BA49181-V12

B.UP10

9

VDD3V

SYS+B

SWVDD

VDD

SW5V

SYS+B

BESNS

SW5VCONT

+B

IC501BD9007FUSB5V

IC712BD6538G

PVin

Vin

SW

EN

VIN

EN

FLG

+B.UP

VDDCONT

SYSPW

8

7

USB5V VOUT5

DREG85

SYNC

USBCT

FLG

255

2

8

1

28

1

3

274

SWVDD3V

Q601

PLL_VD

DVDD3

M-REG55

9

57

DVDD294

DVDD4121

B.UP

5

Q75118

19 Q752

VDCON126

CD VDVD

B.UP

USDP

USDM

ATTATT

TANK

ATT RF LFP

LFPVCO

CF

IC1MIX / IF / PLL

IC2EEPROM

1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 2011A

NT

VC

C

SLI

N

IFO

UT

A

IFO

UT

B

DG

ND

RE

FIN

A

RE

FIN

B

LDE

T

VD

D DI

CK

CE

1

DO

CE

2

SLO

UT

RF

GN

D1

RF

GN

D2

RF

GN

D3

RF

GN

D4

VDD

DEH-2200UB/XSEW5181 2 3 4

C

D

F

A

B

E

TUNL

BS

SY

PW36

47

15

SW1

CD16

CD-Lch

B.UP

F

D85

SY

U

FL

255

28

27

VDD3V

PL

DV

M55

9

57

DV94

DV121

B.UP

VD126

5 6 7 8

IN2_L

IN1_L

2

IC201PML014B

ELECTRONIC VOLUME/SOURCE SELECTOR

1

7Rear_L

B.UP

35

44MUTE

9

7

3

5FL-

VCC

VCC

FL+

RL-

RL+

FL-

FL+

RL-

RL+

BREM

ACC

GND

22

AMPIC301

PAL007E

Q921

MUTE

CN832

VC

K, V

DT

, VS

T

Q351(1/2)

Q351(2/2)

B.UP

Q801

SYSTEM MICROCOMPUTER

ASENSE

13

7

5

1

3

18

16

JA901

12

11

17

6

19

SOURCE

ROT1

ILM+B

DPDT

KYDT

SRC33

111

ILMPW2

DPDT23

KYDT24

CN251

RLIn12

ROT1

4ROT0110

ROT0

Q802

20DSENS

USB5V

DSENS34

16

14DM

DP

ASENS

6Front_L FLIn

11

XOUT

XIN

82

X60174.1MHz81

BU_X1

BU_X2

52

X6814.7186MHz51

Q251

MUTE

20

6

25B.REM

ASENS

RL

14

ENS

SPW

ROFF

VDD

RESET

SL62SL-IN

IF_INA77IFA

IF_INB78IFB

FREFA96REFA

FREFB97REFB

LOCK99LDET

TUNDO100DI

TUNCK101CK

TUNDI

102CE1

CE2

CE103DO

SL

109CE2

136SLOUT

2

B.UP

RCA OUT

POWERCONNECTOR

L_OUT59

SYSTEM MICROCOMPUTER

4STBY

B.UP

3SW5V

18USB5VUSDP

USDM

AUX-G 5

AUX-L7

AUX-L4AUX-G5

IN4+_L

IN4-_L

ILMPW

REG

NC

SBCTL

G

L_VDD

DD3

-REGC

DD2

DD4

MUTE

CONT

IC601(2/2)PN5035A

IC601(1/2)PN5035A

D

:DEH-2200UB/XS/EW5 :DEH-2220UB/XS/EW5 :DEH-2200UUB/XS/EW5 :DEH-2210UB/XS/UR

ABCD

A B C TEL INQ851

TELIN9

26TELIN

KEYAD

KEYD

CN941

KEYAD142

130 KEYD

WIREDREMOTE

A B C

3

2

1

DPDT

DM

DP

USB5V

DM

DP

USB5V

KD

T0-

3

KS

T0-

4

LCD1801

CN1821 CN1901

CN1911

FRONTAUX

USB

KEYBOARD UNIT

18

18

KYDT19 20

B

14

16

SW5V

SW5V

17

22

X18015.00MHz

23

KEY MATRIX

S1837

S1845

BAND/ESC

4

S1836S1835

S1825S1826

S1827S1828

S1829S1830

S1823S1824

S1831S1832

S1833S1834

S1821S1822

1056

1

3

2

4

61

2

4

5

3

3

ILM+B

ILLUMID1852-D1857D1861-D1870

LCDBKD1851

12

DSENS20

UPLEFT RIGHT DOWN

S1843S1844

CD EJECT REGION DISP/BACK

SRC LIST

6 5

S1840

3

S1839

S1841 S1842

S1838

1 2

AUX L7

AUX G

AUX LAUX R

AUX G

ROT1

ROT0

KST1

KDT2

AUXV/SOURCE

5

SOURCE11

23

1

LCD DRIVER/KEY CONTROLLER

IC1801PD6340A

KEY DATA

DPDT

KYDTX0

X1

VLCDVDD

DEH-2200UB/XSEW5 195 6 7 8

C

D

F

A

B

E

1 2 3 4

SE

GM

EN

T

CO

MM

ON

LCD (CAW1970)

DEH-2200UB/XSEW5201 2 3 4

C

D

F

A

B

E

5 6 7 8

5. DIAGNOSIS5.1 OPERATIONAL FLOWCHART

VDD = 3.3 VPin 8

BSENSPin 36

ASENSPin 35

BSENS = L

Startscommunication

with Grillemicrocomputer.

SWVDD <- HPin 1

Source keysoperative

Source ON

SYSPW <- HPin 15

300 ms

300 ms

Completes power-on operation.(After that, proceed to each source operation)

In case of the above signal, the communicationwith Grille microcomputer may fail.If the time interval is not 300 msec, the oscillatormay be defective.

Power ON

ASENS = L

DEH-2200UB/XSEW5 215 6 7 8

C

D

F

A

B

E

1 2 3 4

5.2 ERROR CODE LIST

8-digit display 6-digit display 4-digit display

ERROR-xx ERR-xx E-xx

(2) LIST OF CD ERROR CODES (Error Mode: 0xFD)

Code Classification Error code to be displayed Details and possible causes

10 Electricity Carriage Home NGFailure in communica-tion with the Servo LSI

The CRG cannot move toward the inner track.The CRG cannot move from the inner track.--> Defective HOME SW; Failure in CRG movement; Failure in communication between the microcomputer and the Servo LSI.

11 Electricity Focus Search NG Focusing not available--> Disc placed upside-down; CD-RW disc used; Stains on the disc; excessive vibration.

23 Disc File Format NG Data are written in a file format not supported.--> A CD-ROM disc on which data are written in a file format other than ISO 9660, Level-1 or -2 (for example, in UDF) is loaded.

22 Disc No playback Playable MP3 or WMA file not found--> No MP3 or WMA file exists on the loaded CD-ROM disc.

24 Disc All DRM All the playable files on the disc are DRM-protected.--> This error code will not be displayed when even one file not protected by DRM is contained on the disc.

17 Electricity Setup NG AGC protection does not work. Focus can be easily lost.--> Scratches or stains on the disc; excessive vibration; CD-RW disc used.

15 Electricity Failure in RF data RF not read--> A CD-R disc that does not contain data loaded--> A CD-RW disc that does not contain data loaded

12 Electricity Spindle Lock NGSubcode NGRF-amp NG

Spindle not locked. Subcode not readable.Proper RF AMP gain not obtained.--> Defective spindle; Scratches or stains on the disc; excessive vibration.--> A CD-R disc that does not contain data loaded, or in a rare case, disc placed upside-down.--> CD signal error.

30 Electricity Search Time Out Failed to reach a target address--> CRG tracking error or scratches on the disc

50 Mechanism Failure in ejection Disc ejection not completed--> A foreign object inserted in the mechanism; Disc jammed.

51 Mechanism Failure in retriedturning for ejection

Disc could not be ejected even after disc turning had been retried.--> A foreign object inserted in the mechanism; Disc jammed.

52 Mechanism Failure in disc loading Disc loading not completed--> A foreign object inserted in the mechanism; Disc jammed.

NOTES• Indications of error codes are available only during disc operations, because CD operations are unavailable if a mechanical error is generated.• If the TOC cannot be read, this is not processed as an error, and operation continues accordingly.• If you design a new head unit, be sure to use one of the display formats indicated in “Display example of the head unit.”

ERROR CODES

(1) DISPLAY METHODIf “0xFD” error mode is displayed in CD MODE (CD MODE area for display) or USB MODE (USB MODE area), an error code will be displayed in the DMIN (minute display) and DSEC (second display) areas.

The same code is displayed in the DMIN and DSEC areas.The DTNO area is blank (#0FFH), as it conventionally was.• The error mode for a VD error is 0xFB. (This is because the system microcomputer recognizes a VD error even in the No Display format.)• Display example of the head unit Depending on the display capability of LCDs, the display format varies, as shown below. XX denotes an error number. Note: In a case of an OEM product, the error display format is subject to the specifications used by the equipment manufacturer.

If a CD or USB memory device is inoperable, or operation of such media is stopped by an error, the error mode is established and a cause of the error is displayed by an error code. Indication of error codes is intended to reduce the number of calls from customers and facilitate failure analysis and repair work in servicing.

DEH-2200UB/XSEW5221 2 3 4

C

D

F

A

B

E

5 6 7 8

(3) USB-RELATED ERROR CODES

16(*1)

Device iPod authentication error Authentication of iPod failed--> After a reattempt of iPod authentication, an error was returned from the iPod machine and authentication IC.

18 Device Unsupported device Connection of a device not supported was detected.--> A device other than a mass-storage device and iPod is connected.--> An iPod of a generation earlier than 5G/nano is connected. Or, an iPod (even one of a generation after 5G/nano) with the firmware that does not support digital streaming is connected.

24 Device All DRM

*Error code only for models that support iPod.

Note: Whether power supply failed or not can be judged from just the error mode (0xFA). (Referring to the error code [0xA1] is not necessary.)

23 Device File Format NG Data are written in file format not supported.--> A format other than FAT is used.

22 Device Playback unavailable Playable file (MP3/WMA/AAC/WAV) not found--> No playable file (MP3/WMA/AAC/WAV) exists in the device set.

19 Device Communication error Communication with a device failed.--> Communication failed because of a defective device, etc.

(4) LIST OF ERROR CODES (Error Mode: 0xFA) Only for USB

A1 System Failure in power supply Excess current detected in the USB bus.--> Electric current exceeding the specified 500 mA flowed in the USB bus. The bus power is shut off and the unit is stopped in response to an error. For restoration, turn the unit OFF then back ON again

Note: Whether power supply failed or not can be judged from just the error mode (0xFB). (Referring to the error code [0xA0] is not necessary.)

(5) LIST OF ERROR CODES (Error Mode: 0xFB) Only for CD

A0 System Failure in power supply A voltage or ground short was generated in the VD power.--> Defective SW transistor; Failure in the power supply unit (defective connector); Ejection is not possible; Restoration is only possible by turning the unit OFF then back ON again.

• The 2 high-order digits of an error code denote the main classification, shown below. 1x: Setup-related errors 2x: Errors related to TOC reading 3x: Search-related errors 4x: Playback-related errors 5x: Loading-ejection-related errors Ax: Other type of errors

• How to restore from each error is shown below. 1x, 2x, 3x, and 4x: ACC-OFF then ON, CD-OFF then ON, Disc ejection, DKSTOP then DKPLAY 5X: ACC-OFF then ON, Disc ejection, Disc reloading, Disc removal Ax: ACC-OFF then ON

NOTES• The 2 high-order digits of an error code denote the main classification, shown below. 1x: Setup-related errors 2x: Errors related to file-system reading Ax: Other type of errors

• How to restore from each error is shown below. 1x: ACC-OFF then ON, USB-OFF then ON, Device removal, DKSTOP then DKPLAY 2X: ACC-OFF then ON, USB-OFF then ON, Device removal, DKSTOP then DKPLAY Ax: ACC-OFF then ON

(6) ACTIONS OF CD/USB DURING ERROR

Mode Error code CD action USB action Mode Error code CD action USB action

3x

Stopped for an error

Stopped for an error

Stopped for an error

Stopped for an error

Stopped for an error

Stopped for an errorStopped for an error

Stopped for an errorOperable

Operable

Operable

Operable

Operable

Operable

Operable

Operable

2x (CD)

2x (USB)FD

FD

FB

FA

1x 4x

5x

A0

A1

Code Classification Error code to be displayed Details and possible causes

Code Classification Error code to be displayed Details and possible causes

Code Classification Error code to be displayed Details and possible causes

All the playable files on the disc are DRM-protected.--> This error code will not be displayed when even one file not protected by DRM is contained on the disc.

DEH-2200UB/XSEW5 235 6 7 8

C

D

F

A

B

E

1 2 3 4

5.3 CONNECTOR FUNCTION DESCRIPTION

REAR OUTPUT

ANTENNA

1 FL+2 FR+3 FL-4 FR-5 RL+6 RR+7 RL-8 RR-

9 TEL10 NC11 NC12 NC13 ACC14 B.REM15 B.UP16 GND

16 14 12 10 8 6 4 2

15 13 11 9 7 5 3 1

WIRED REMOTE CONTROL

(EW5)

DEH-2200UB/XSEW5241 2 3 4

C

D

F

A

B

E

5 6 7 8

6. SERVICE MODE6.1 DISPLAY TEST MODE

1. To enter the test mode (1)

Turn on ACC and Backup while pressing the RIGHT and the DOWN buttons together.

2. Operation method

V E R # # # #

N O E E P R O M

S U M E R R O R

S S S S C C C C1 2 3 4 1 2 3 4

.

KeyLIST

14

5

6

DISP

ContentsAll lighting of displayAll lights out of displayLCD check mode A

LCD check mode B

LCD check mode C

System version display

ex.) Ver.7.01 -> “VER 7.01”

3. To enter the test mode (2)

Turn on ACC and Backup while pressing the 1 and the 3 buttons together.

4. Operation method

Start to test mode

ROM Correction version display

ROM Correction is not connected

ROM Correction check sum error

Normal movement

Normal display

The display mode to the display usually.

Display stop

To the static display of the display mode.

[Test Overview]

Change display as follows by pressing the 1 and the 3 buttons together.

Sn ROM Correction number

Cn CH use information (1:Use / 0:Not use Corresponds from the left to CH1, CH2, CH3, CH4)

DEH-2200UB/XSEW5 255 6 7 8

C

D

F

A

B

E

1 2 3 4

6.2 CD TEST MODE

[Key]

Contents

Display

[BAND]

Power On(T.Offset is adjusted)TRK MIN SEC00 00 00

[3]

Power On(T.Offset is not adjusted)

99 99 99

[2]

RF AMPGain switching

GG GG GG

*1[4]

SPINDLESpeed switching

SP SP SP

*9

[3]

Focus CloseS curve check

TRK MIN SEC91 91 91

[6]

Focus Mode switching

0X 0X 0X

*2

[1]

Tracking ServoClose

00 00 00or 99 99 99

[<]

CRG +

[2]

Self-adjustingswitching

TRK MIN SEC?? ?? ??

*3*8

[>]

CRG -*8

[BAND]

Power Off

TRK MIN SEC

[BAND]

Power Off

TRK MIN SEC

[BAND]

Power Off

TRK MIN SEC

[BAND]

Power Off

TRK MIN SEC

[1]T.Close & AGC

Applicable servomechanism

TRK MIN SEC?tr ?min ?sec

[6] [3]

RF AGC /RF AGC coefficient display

[<]

CRG +

8X 8X 8Xor 9X 9X 9X

[2]

T.Balance adjustment /T.BAL coefficient display

TRK MIN SEC?? ?? ??

[>]

CRG -T.CloseApplicable servomechanism

?? ?? ??

[1]

F,T,RF AGCF.Bias display switchingTRK MIN SEC

TRK MIN SEC

TRK MIN SEC

TRK MIN SEC?tr ?min ?sec

TRK MIN SEC

[3] [6]

CRG/TR jumpvalue switching

[<]

CRG/TR Jump +

[2]

Tracking Open

[>]

CRG/TR Jump -

?tr ?min ?sec

TRK MIN SEC

TRK MIN SEC

TRK MIN SEC?tr ?min ?sec

00 00 00or 99 99 99

TRK MIN SEC

TRK MIN SEC?tr ?min ?sec

8X 8X 8Xor 9X 9X 9X

8X 8X 8Xor 9X 9X 9X

00 00 00or 99 99 99

TRK MIN SEC?tr ?min ?sec?? ?? ??

*7 F,T AGC / F.BiasRF AGC

8X 8X 8Xor 9X 9X 9X

[2]

Tracking Open

*6

*5 *4 *4

Operation[Key] Test Mode

[BAND] Power On/Off[<] CRG + / TR Jump +

(Direction of the external surface)[>] CRG - / TR Jump -

(Direction of the internal surface)[1] T. CLS & AGC & Applicable servomechanism /

AGC,AGC display setting[2] RF Gain switching / Offset adjustment display /

T.Balance adjustment / T. Open[3] F. Close,S. Curve / Rough Servo and RF AGC /

F,T,RF AGC[4] SPDL 1X/2X switching

As for the double speed(2x), audio output cannot besupported.

[5] Gop Mode switching

[6] F. Mode switching / Tracking Close / CRG TRJump Switching

*) After the [EJECT] key is pressed keys other than the [EJECT] key should not be pressed, until disc ejection is complete. When the key [2] or [3] is pressed during the Focus Search, the power supply should be immediately turned off (otherwise the lens

sticks to Wall, causing the actuator to be damaged). In the case of TR jump other than to 100TR, the function shall continue to be processed even if the TR jump key is released. As for

the CRG Move and 100TR Jump, the mechanism shall be set to the Tracking Close mode when the key is released. When the power is turned on/off the jump mode is reset to the Single TR (91) while the gain of the RFAMP is reset to 0 dB. At the

same time all the self-adjusting values shall return to the default setting.

*10

TRK MIN SEC

[5]

Gop ModeGop Mode switching

OL OL OL

- Flow Chart[CD] or [SOURCE]

Source ON

TRK MIN

[4] + [6] + Reset

Test Mode IN

*1) TYP t + 6 dB t + 12 dB TRK MIN SEC TRK06MIN06SEC06 TRK12MIN12SEC12

*2) Focus Close t S. Curve t F EQ measurement setting TRK00MIN00SEC00

TRK01MIN01SEC01 TRK02MIN02SEC02 (TRK99MIN99SEC99)

*3) F.Offset Display t T.Offset Display t Switch to the order of the original display

*4) 1TR/4TR/10TR/32TR/100TR*5) Singlet 4TR t 10TR t 32TR t 100TR t CRG Move 9x(8x):91(81) 92(82) 93(84) 94(84) 95(85) 96(86)

*6) Only at the time of CRG move, 100TR jump

*7) TRK/MIN/SEC t F.AGC t T.AGC Gain t F.Bias t RF AGC

*8) CRG motor voltage = 2 [V]

*9) TYP (1X) t 2X t 1X TRK MIN SEC

TRK22MIN22SEC22 TRK11MIN11SEC11*10) OFF(TYP) t FORCUS t TRACKING TRK MIN SEC

TRK70MIN70SEC70 TRK71MIN71SEC71

As for the double speed (2x), audio output cannot be supported

Do not do Tracking Servo Close before doing Focus Servo Close. (Because the overcurrent flows)

DEH-2200UB/XSEW5261 2 3 4

C

D

F

A

B

E

5 6 7 8

7. DISASSEMBLY

1

1

2

2

3

4

While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same.

- Removing the Case and Panel Assy (Fig.1)

Remove the Case.

- Removing the CD Mechanism Module (Fig.2)

Remove the four screws.

Disconnect the FFCand then remove the CD Mechanism Module.

Fig.1

Fig.3

- Removing the Tuner Amp Unit (Fig.2, 3)

Fig.4

Remove the two hooks and then remove the Panel Assy.

1

Fig.2

Remove the two screws.(Fig.3)

Remove the two screwsand then remove the Tuner Amp Unit.(Fig.4)

Straighten the tabs at two locations indicated.(Fig.4)

Remove the two screws.(Fig.4)

1

1

1

12

CD Mechanism Module

Panel Assy

Case

1

1

1

Tuner Amp Unit

1

2

23

34

4

DEH-2200UB/XSEW5 275 6 7 8

C

D

F

A

B

E

1 2 3 4

1. Hold the Upper and Lower Frames at the specified parts (circled with broken blue lines in the photo below).2. You can hold the tabs of the Lower Frame (circled with broken green lines in the photo below) if you do so only while lifting the Mechanism Unit from the table. Keeping the Mechanism Unit lifted by holding these tabs with your fingers may result in deformation.3. Be careful NOT to hold the front part of the Upper Frame or the CRG Mechanism and NOT to insert foreign objects into these mechanisms. Doing so may result in deformation.

Proper handling

Improper handling

How to Hold the Mechanism Unit

DEH-2200UB/XSEW5281 2 3 4

C

D

F

A

B

E

5 6 7 8

1. Remove the solder from the CRG-motor lead wire (Fig. 1).2. Push in the Disc Detection Arm while applying 4-V power to the CRG Motor (Fig. 2). (Apply 4-V power to the green lead wire. The white lead wire is for grounding.) The Mechanism Module is set to the clamped state, and the PU will move toward the outer track. Note: NEVER apply power to the CRG-motor lead wire without removing the solder from the wire. Doing so may result in damage to the ICs and the PU.3. Stop the motor when the PU reaches around the middle track. Note: Jumpiness will occur when the PU reaches the outermost track. Although jumpiness does not constitute a problem, it is recommended that it occur as least frequently as possible.

Fig. 1Note: Be aware that the colors of the lead wires do not match the indications on the Core Board Pattern (green wire to O and white wire to P).

Fig. 2

Disc Detection Arm

Mechanism Module: How to Set to the Quasi-Clamp State (Driven by the Motor)

DEH-2200UB/XSEW5 295 6 7 8

C

D

F

A

B

E

1 2 3 4

How to Remove the PU Unit

How to Move the PU toward the Outer Track

1. Set the unit to the quasi-clamp state, following the procedures described in “Mechanism Module: How to Set to the Quasi- Clamp State (Driven by the Motor).”2. Temporarily change the engagement position of the bias spring of the feed screw (Fig. 2b). Be careful not to cut yourself on the tip of the spring.3. Hold the PU unit by parts A in Fig. 1 then slide it toward the inner track.4. Remove the backend of the feed screw from the outer holder, by first sliding it, as shown in Fig. 3, then lifting it.5. Remove the PU unit, by lifting it. Lifting the PU unit will disengage the PU unit from the part B of the chassis.Note: When reassembling the PU unit, be sure to securely engage the PU unit with the part B of the chassis, as shown in Fig. 4. Also, be sure to change the engagement position of the bias spring of the feed screw to its original position (Fig. 2a). After reassembling, perform the PU adjustment, following the description in the service manual.

1. Set the unit to the quasi-clamp state, following the procedures described in “Mechanism Module: How to Set to the Quasi- Clamp State (Driven by the Motor).”2. Move the PU unit toward the outer track, by applying 1.5-V power to the CRG motor.Note: After moving the PU toward the outer track and taking the necessary measures, be sure to solder the lead wires.

Fig. 4

Fig. 3

Fig. 1

Fig. 2a Original engagement position

Fig. 2b Temporary engagement position

Slide toward the inner track.

One end of the spring is engaged beneath the resin flange and plate bend.

Outer holderBackend of the feed screw

Properly assembled state[Improper assembly]The chassis is not properly pinched by the PU case and PU rack.

A

B

DEH-2200UB/XSEW5301 2 3 4

C

D

F

A

B

E

5 6 7 8

How to Remove the PU Rack1. Remove the PU Unit, following the procedures described in “How to Remove the PU Unit.”2. Remove the PU Rack fixing screw (Fig. 1).3. Remove the PU Rack, by applying force in the direction of the arrow in Fig. 2.Notes: While handling the PU Unit, be careful NOT to touch the actuator block shown in Fig. 6 or bang the actuator block against your workbench. Handle the PU and PU Unit with care, according to the description in “How to Hold the PU.” When reattaching the PU Rack to the PU, first reassemble parts a and b shown in Fig. 3 into the PU case then attach the boss shown in Fig. 4 to the PU case. After reassembling the PU Rack, insert the feed screw from side c in Fig. 5 (insertion depth: Approx. 18 mm for the part indicated in the photo).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

PU Rack

PU Rack fixing screw

Actuator block

18 mm

b

c

a

DEH-2200UB/XSEW5 315 6 7 8

C

D

F

A

B

E

1 2 3 4

How to Hold the PU1. Be sure to hold the PU at the positions shown in “Proper handling.” NEVER hold it as shown in “Improper handling.”

Do not touch the object lens and ACT.

Do not touch the VR.

Do not touch the Hologram.

Do not pull the FPC.

Proper handling Improper handling

DEH-2200UB/XSEW5321 2 3 4

C

D

F

A

B

E

5 6 7 8

8. EACH SETTING AND ADJUSTMENT8.1 CD ADJUSTMENT

1) Cautions on adjustments In this product the single voltage (3.3 V) is used for the regulator. The reference voltage is the REFO1 (1.65 V) instead of the GND.If you should mistakenly short the REFO1 with the GND during adjustment, accurate voltage will not be obtained, and the servo’s misoperation will apply excessive shock to the pickup. To avoid such problems:a. Do not mix up the REFO1 with the GND when connecting the (-) probe of measuring instruments. Especially on an oscilloscope, avoid connecting the (-) probe for CH1 to the GND. b. In many cases, measuring instruments have the same potential as that for the (-) probe. Be sure to set the measuring instruments to the floating state.c. If you have mistakenly connected the REFO1 to the GND, turn off the regulator or the power immediately.

Before mounting and removing filters or leads for adjustment, be sure to turn off the regulator.

For stable circuit operation, keep the mechanism operating for about one minute or more after the regulator is turned on.

In the test mode, any software protections will not work. Avoid applying any mechanical or electrical shock to the mechanism during adjustment.

The RFAGC and RFO signals with a wide frequency range are easy to oscillate. When observing the signals, insert a resistor of 1k ohms in series.

The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it.

2) Test modeThis mode is used to adjust the CD mechanism module. To enter the test mode.[1]+[6]+[DISC](three times) press uDiagnosis IN u[DISC]+[RIGHT] press uDisplay : PBUS TEST u[DISC] pressed for 1.7 seconds or more uDiagnosis OUT u[DISC] press

To exit from the test mode.Turn off the ACC and back up.

Notes:a. During ejection, do not press any other keys than the EJECT key until the loaded disc is ejected.b. If you have pressed the ( ) key or ( ) key during focus search, turn off the power immediately to protect the actuator from damage caused by the lens stuck.c. For the TR jump modes except 100TR, the track jump operation will continue even if the key is released.d. For the CRG move and 100TR jump modes, the tracking loop will be closed at the same time when the key is released.e. When the power is turned off and on, the jump mode is reset to the single TR (91), the RF amp gain is set to 0 dB, and the auto-adjustment values are reset to the default settings.

DEH-2200UB/XSEW5 335 6 7 8

C

D

F

A

B

E

1 2 3 4

8.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT

FEREFO1

CD CORE UNIT

Note :The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below.

Purpose :To check that the grating is within an acceptable range when the PU unit is changed.

Symptoms of Mal-adjustment :If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching.

Method : Measuring Equipment Measuring Points

Oscilloscope, Two L.P.F. E, F, REFO1

Disc TCD-782 Mode TEST MODE

Checking Procedure1. In test mode, load the disc and switch the 3 V regulator on.2. Using the right and left buttons, move the PU unit to the innermost track.3. Press key CH4 to close focus, the display should read "91". Press key CH3 to implement the tracking balance adjustment the display should now read "81". Press key CH4. The display will change, returning to "81" on the fourth press.4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75 . Refer to the photographs supplied to determine the phase angle.5. If the phase difference is determined to be greater than 75 try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75 then the mechanism should be judged to be at fault. NoteBecause of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle.

HintReloading the disc changes the clamp position and may decrease the "wobble".

100 kohm

390 pF

100 kohm

390 pF

E

VREF

F

VREF

Xch Ych

L.P.F.

L.P.F.

Oscilloscope

DEH-2200UB/XSEW5341 2 3 4

C

D

F

A

B

E

5 6 7 8

Grating waveform

45 degrees

0 degrees

75 degrees

60 degrees

30 degrees

90 degrees

Ech -> Xch 20 mV/div, ACFch -> Ych 20 mV/div, AC

DEH-2200UB/XSEW5 355 6 7 8

C

D

F

A

B

E

1 2 3 4

9. EXPLODED VIEWS AND PARTS LIST

9.1 PACKING

NOTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List. The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screw adjacent to mark on the product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.)

""

DEH-2200UB/XSEW5361 2 3 4

C

D

F

A

B

E

5 6 7 8

(1) PACKING SECTION PARTS LIST

(2) CONTRAST TABLEDEH-2200UB/XSEW5, DEH-2200UBB/XSEW5, DEH-2220UB/XSEW5 and DEH-2210UB/XSUR are constructed the same except for the following:

Owner's Manual,Installation Manual

Mark No. Description Part No.

1 Polyethylene Bag QEG3001

2 Cord Assy See Contrast table (2)

3 Screw BPZ20P060FTC

4 Polyethylene Bag CEG1160

5 Handle CND3707

6 Unit Box See Contrast table (2)

7 Contain Box See Contrast table (2)

8 Protector YHP5069

9 Protector YHP5070

10 Case Assy YXB5009

* 11-1 Warranty Card See Contrast table (2)

11-2 Owner's Manual See Contrast table (2)

11-3 Installation Manual See Contrast table (2)

Mark No. Description Part No.

Mark No. Description DEH-2200UB/XSEW5 DEH-2200UBB/XSEW5 DEH-2220UB/XSEW5 DEH-2210UB/XSUR 2 Cord Assy YDP5037 YDP5037 YDP5037 YDP5041 6 Unit Box YHG5540 YHG5542 YHG5541 YHG5544 7 Contain Box YHL5540 YHL5542 YHL5541 YHL5544* 11-1 Warranty Card CRY1279 CRY1279 CRY1279 YRY5003 11-2 Owner's Manual YRD5303 YRD5303 YRD5303 YRB5127

11-3 Installation Manual YRD5304 YRD5304 YRD5304 Not used

Part No. Language

YRD5303 English, French, Italian, Spanish(Espanol), German, Dutch, Russian

YRD5304 English, French, Italian, Spanish(Espanol), German, Dutch, Russian

YRB5127 Russian

DEH-2200UB/XSEW5 375 6 7 8

C

D

F

A

B

E

1 2 3 4

9.2 EXTERIOR(1)

B

DEH-2200UB/XSEW5381 2 3 4

C

D

F

A

B

E

5 6 7 8

(1) EXTERIOR(1) SECTION PARTS LIST

(2) CONTRAST TABLEDEH-2200UB/XSEW5, DEH-2200UBB/XSEW5, DEH-2220UB/XSEW5 and DEH-2210UB/XSUR are constructed the same except for the following:

Mark No. Description Part No.

1 Holder CND3598

2 Cord Assy See Contrast table (2)

3 Case YNB5063

4 Panel YNS5537

5 Detachable Assy See Contrast table (2)

6 Screw BPZ20P100FTC

7 Spring CBH2210

8 Button(DISP, SRC, UP) YAC5384

9 Button(ESC, DOWN, LEFT) YAC5385

10 Button(1, RIGHT, 4, 5) YAC5386

11 Button(2, 3, 6, LIST) YAC5387

12 Button(EJECT, TA/AF) YAC5388

13 Button(DETACH) YAC5389

14 Cover YNS5536

15 Grip(USB) YNV5194

16 LCD(LCD1801) See Contrast table (2)

17 Holder YNC5083

18 Rubber YNV5191

19 Connector YNV5192

20 Lighting Conductor YNV5193

21 Grille Unit See Contrast table (2)

22 Knob Unit YXC5123

23 Spring YBL5010

24 Sheet See Contrast table (2)

25 Sheet See Contrast table (2)

Mark No. Description Part No.

Mark No. Description DEH-2200UB/XSEW5 DEH-2200UBB/XSEW5 DEH-2220UB/XSEW5 DEH-2210UB/XSUR 2 Cord Assy YDP5037 YDP5037 YDP5037 YDP5041 5 Detachable Assy YXA5676 YXA5678 YXA5677 YXA5679 16 LCD(LCD1801) CAW1970 YAW5107 CAW1970 CAW1970 21 Grille Unit YXA5648 YXA5687 YXA5649 YXA5689 24 Sheet Not used CNN1381 Not used Not used

25 Sheet Not used CNN1382 Not used Not used

DEH-2200UB/XSEW5 395 6 7 8

C

D

F

A

B

E

1 2 3 4

9.3 EXTERIOR(2)

A

A

B

B

C

CA

DEH-2200UB/XSEW5401 2 3 4

C

D

F

A

B

E

5 6 7 8

(1) EXTERIOR(2) SECTION PARTS LIST

(2) CONTRAST TABLEDEH-2200UB/XSEW5, DEH-2200UBB/XSEW5, DEH-2220UB/XSEW5 and DEH-2210UB/XSUR are constructed the same except for the following:

Mark No. Description Part No.

1 Screw ASZ26P050FTC

2 Screw ASZ26P080FTC

3 Screw BSZ26P060FTC

4 Screw BSZ26P100FTC

5 CD Mechanism Module(S11) CXK5870

6 Cable YDE5059

7 Holder YND5048

8 Tuner Amp Unit See Contrast table (2)

9 Screw BPZ26P080FTC

10 Screw BSZ26P060FTC

11 Screw BSZ26P160FTC

12 FM/AM Tuner Unit See Contrast table (2)

13 Holder CND3466

> 14 Fuse(10 A) YEK5001

15 Holder See Contrast table (2)

16 Heat Sink YNR5139

17 Chassis Unit See Contrast table (2)

18 Spring CBH2961

19 Spring CBH2962

20 Arm CNV9312

21 Arm CNW1439

22 Panel Unit YXA5650

23 Button CAC4836

24 Spring YBH5012

Mark No. Description Part No.

Mark No. Description DEH-2200UB/XSEW5 DEH-2200UBB/XSEW5 DEH-2220UB/XSEW5 DEH-2210UB/XSUR 8 Tuner Amp Unit YWM5445 YWM5447 YWM5446 YWM5448 12 FM/AM Tuner Unit CWE2106 CWE2106 CWE2106 CWE2123 15 Holder YND5043 YND5043 YND5043 YND5045 17 Chassis Unit YXA5651 YXA5651 YXA5651 YXA5652

DEH-2200UB/XSEW5 415 6 7 8

C

D

F

A

B

E

1 2 3 4

9.4 CD MECHANISM MODULE

A

CD

C

A

B

B

C

D

(A) : GEM1045

(B) : GEM1038

(C) : GEM1024

(D) : GEM1043

(C)

(C)

(A)

(A)

(D)

(D)

(A)

(A)

(D)

(A) (A)

(A)

(A)

(A)

(C)

(C)

(C)

(C)

(B)

(C)

(C)

DEH-2200UB/XSEW5421 2 3 4

C

D

F

A

B

E

5 6 7 8

CD MECHANISM MODULE SECTION PARTS LIST

Mark No. Description Part No.

1 Screw BMZ20P020FTC

2 Screw BSZ20P040FTC

3 Screw(M2 x 4) CBA1835

4 Washer CBF1038

5 Spring CBH3010

6 Spring CBH2855

7 Spring CBH2856

8 Spring CBH2860

9 Spring CBH2609

10 Spring CBH3011

11 Spring CBH3012

12 Spring CBH3014

13 Spring CBH3015

14 Spring CBH3016

15 Spring CBH3017

16 Spring CBH3018

17 Spring CBH3019

18 Spring CBH3020

19 Spring CBL1797

20 Pickup Unit(S10.5)(Service) CXX1942

21 Bracket CND4553

22 Arm CND4555

23 Frame CND4557

24 Frame CND5217

25 Lever CND5398

26 Sheet CNN2280

27 Rack CNV8342

28 Guide CNW1171

29 Roller CNW1172

30 Arm CNW1173

31 Arm CNW1174

32 Roller CNW1175

33 Lever CNW1176

34 Arm CNW1177

35 Arm CNW1178

36 Gear CNW1180

37 Gear CNW1181

38 Gear CNW1182

39 Gear CNW1183

40 Rack CNW1184

41 Gear CNW1185

42 Gear CNW1186

43 Gear CNW1187

44 Gear CNW1188

45 Clamper CNW1190

46 Arm CNW1192

47 Holder CNW1193

48 Holder CNW1194

49 Damper CNW1197

50 Damper CNW1198

51 Arm CNW1726

52 Motor Unit CXC4026

53 Screw Unit CXC8894

54 Arm Assy CXC8896

55 Washer CBF1037

56 Washer CBF1038

57 Arm CND4554

58 Collar CNV6906

59 Roller CNW1196

60 Gear Unit CXC8893

61 Washer YE15FTC

62 Chassis Unit CXE1946

63 Motor Unit CXE2273

64 Screw JFZ20P025FTC

65 Screw JGZ17P022FTC

66 Screw IMS20P030FTC

67 CD Core Unit (S11USB) CWX3776

Mark No. Description Part No.

DEH-2200UB/XSEW5 435 6 7 8

C

D

F

A

B

E

s

1 2 3 4

10. SCHEMATIC DIAGRAM10.1 TUNER AMP UNIT(GUIDE PAGE)

A

A-aA-a A-b

A-a A-b

A-bA-a

Large sizeSCH diagram

Guide page

Detailed page

Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST".

PN5034B

EW5:CWE2106-UR:CWE2123-

EW

5:U

R:

The > mark found on some component parts indicatesthe importance of the safety factor of the part.Therefore, when replacing, be sure to use parts ofidentical designation.

Symbol indicates a resistor.No differentiation is made between chip resistors anddiscrete resistors.

NOTE :

Symbol indicates a capacitor.No differentiation is made between chip capacitors anddiscrete capacitors.

NM : No Mount

C CN701

B CN1821

FM

/AM

TU

NE

R U

NIT

FM(10%):-29.5 dBsAM(15%):-26.0 dBs

CD/USB/SD(-20 dB): -19.4 dB

AUX1(-20 dB):-17.8 dBs

DEH-2200UB/XSEW5441 2 3 4

C

D

F

A

B

E

034B

CN701

SD(-20 dB): -1

5 6 7 8

A

A-b

EW5

NM

NM

EW5

NM

EW5:

UR:

A TUNER AMP UNIT

>

3A

600uH

9.4 dBs

FM:-33.1 dBsAM:-29.6 dBs

CD/USB/SD:-22.4 dBsAUX1:-20.8 dBs

FM:-12.0 dBsAM: -7.5 dBs

CD/USB/SD: -9.3 dBsAUX1: -9.7 dBs

FM:+13.98 dBsAM:+18.48 dBs

CD/USB/SD: +16.7 dBsAUX1: +16.3 dBs

DEH-2200UB/XSEW5 455 6 7 8

C

D

F

A

B

E

1 2 3 4

A-a

A-b

A-b

EW

5:

UR

:

AT

UN

ER

AM

P U

NIT

> 3A

FM

:-33

.1 d

Bs

AM

:-29

.6 d

Bs

CD

/US

B/S

D:-

22.4

dB

sA

UX

1:-2

0.8

dBs

FM

:-12

.0 d

Bs

AM

: -7

.5 d

Bs

CD

/US

B/S

D:

-9.3

dB

sA

UX

1:-9

.7 d

Bs

DEH-2200UB/XSEW5461 2 3 4

C

D

F

A

B

E

EW

5:

UR

:

5 6 7 8

A-a

A-b

A-b

EW

5

NM

NM

EW

5

NM

600u

H

FM

:+13

.98

dBs

AM

:+18

.48

dBs

CD

/US

B/S

D:

+16.

7 dB

sA

UX

1:+1

6.3

dBs

DEH-2200UB/XSEW5 475 6 7 8

C

D

F

A

B

E

PN

5034

B

1 2 3 4

A-b

A-a

A-a

A-b

EW

5:C

WE

2106

-U

R:C

WE

2123

-

The

> m

ark

foun

d on

som

e co

mpo

nent

par

ts in

dica

tes

the

impo

rtan

ce o

f the

saf

ety

fact

or o

f the

par

t.T

here

fore

, whe

n re

plac

ing,

be

sure

to u

se p

arts

of

iden

tical

des

igna

tion.

Sym

bol i

ndic

ates

a r

esis

tor.

No

diffe

rent

iatio

n is

mad

e b

etw

een

chip

res

isto

rs a

nddi

scre

te r

esis

tors

.

NO

TE

: Sym

bol i

ndic

ates

a c

apac

itor.

No

diffe

rent

iatio

n is

mad

e b

etw

een

chip

cap

acito

rs a

nddi

scre

te c

apac

itors

.

NM

: N

o M

ount

CC

N70

1

FM/AM TUNER UNIT

FM

(10%

):-2

9.5

dBs

AM

(15%

):-2

6.0

dBs

CD

/US

B/S

D(-

20 d

B):

-19

.4 d

Bs

FM

:A

M:

CD

/US

B/S

D:

AU

X1:

DEH-2200UB/XSEW5481 2 3 4

C

D

F

A

B

E

5 6 7 8

A-a

A-b

A-b

A-a

PN

5034

B

EW5:UR:

BC

N18

21

AU

X1(

-20

dB):

-17.

8 dB

s

DEH-2200UB/XSEW5 495 6 7 8

C

D

F

A

B

E

1 2 3 4

10.2 KEYBOARD UNIT

B

5.00 MHz

CL-195SR-CD(RED)

820(1/4W)

820(1/4W)

A,B,D

C

A,B,D C

DS

2XA

4WB

ET

W1(

Z1)

B KEYBOARD UNIT

A,B,D C

CL-195PG-CD(GREEN)

820(1/4W)

560(1/4W)

1k(1/4W)

2.2k(1/4W)

1k(1/4W)

2.2k(1/4W)

680(1/4W) 560(1/4W)

TA

DEH-2200UB/XSEW5501 2 3 4

C

D

F

A

B

ED

TA

5 6 7 8

B

AC

N83

2

USB

AUX

A:DEH-2200UB/XSEW5B:DEH-2200UBB/XSEW5C:DEH-2220UB/XSEW5D:DEH-2210UB/XSUR

PWR/VOL

AUX1:-17.8 dBs

DEH-2200UB/XSEW5 515 6 7 8

C

D

F

A

B

E

FLM

D0

VD

SE

NS

TH

201

C20

20.

1uC

213

0.1u

R20

3

(160

8)

R23

5TE

MP

DS

CS

NS

VD

SE

NS

11

TE

MP

12

AD

C.V

DD

13

AD

CG

ND

14IO

GN

D95

IO.V

DD

96R

A0

97R

A1

98R

A2

NM

NM

1 2 3 4

10.3 CD MECHANISM MODULE(GUIDE PAGE)

C

C-a

1TOP

2FOP

3FOM

4TOM

5MD

6A+C

7VR

8VREF

9P1+P6

10GND

11P5+P10

12VCC

13B+D

14LD+

15LD-

FOCUS ACT

TRK ACT

P4

LD

VCC

P8

P2

P1P6

P5P10

P3

P9P7

MD

HOLOGRAM UNIT

E:P5+P10F:P1+P6

M2 CXC4026LOADING/CARRIAGEMOTOR

M1 CXE2273SPINDLE MOTOR

HO

ME

8EJ

DM

DP

PD

E

F

BD

AC

MD

SD

FD

TDBD

E

F

AC

TOM

FOM

FOP

TOP

PD

RE

FO

UT

REFOUT

REFOUT

TD

FD

CO

NT

FOP

FOM

TOM

TOP

SO

M

SO

P

LCO

M

LCO

P

LOEJ

CLCONT

SD

DSCSNS

8EJ

SOM

SOP

LCOM

LCOP

MD

USBGND

HOME

DS

CS

NS

VDSENSVD

VD

VDVD

PG

ND

PG

ND

PGND

GNDGND

GND

GND

VDDVDD

X205

IC301

VR1

OPIN2+2

OPIN2-3

OPOUT24

5 OPIN1+

6 OPIN1-

7 OPOUT1

29FIN1

9MUTE

10 PowVcc1

11VO1-

12VO1+

13VO2-

14VO2+

8GND1

15VO3+

17VO4+

18VO4-

19PowVcc2

20GND2

21CNT

22LDIN

23OPOUTSL

24OPINSL

25OPOUT3

26OPIN3-

27OPIN3+

28PreVcc

16VO3-

30FIN2

Q101

C10

2 NM

C20

3

C26

3N

M

C70

8

NM

R25

8

NM

C216

3300p

C217 0.1u

C218

0.047u

C219 0.1u

C220 1800p

C221

0.1u

C224 0.1u

C226

68p

C227

47p

C2360.1u

C240

0.1u

C25

0

1000

p

C25

1 1000

p

C26

0 0.1u

C30

3

4700

p

C30

40.

022u

C71

1

0.1u

R22110k

R222

10k

R225

10k

R22

6

39k

R25

410

0k

R25

610

0k

R25

90

R26

110

0k

R30

7

18k

R308

18k

R310

18k

R30

9

18k

C10

5C

110

C11

1

NM

C305

NM

C70

9

NM

C71

0

NM

R106NM

R10

8

NM

R236 NM

C10

6

(212

5)4.

7u

C22256p

C22

34p

C228

0.01u

C229 0.1u

C23922p

C293

1000p

C308

(1608)

NM

R10

12.

4R

102

2.4

R10

32.

7

R104

2.2k

R10

7

1ME

G

R21

44.

7k

R21

64.

7k

R22

7

5.6k

R2281.2k

R22

9

4.7k

R232

1.2k

R24

0 (160

8)47k

R24

1

10k

R284

15kR285

15k

R291

2.7k

ADIN

TE

TEC

CLCONT

VDSENS

FE

MDX

LOEJ

RFO

ATEST

LD

F

B+D

PD

E

A+C

TIN

CONT

HOME

8SNS

TO

M

DSCSNS

FO

M

FO

P

SIN

TO

P

FINCIN

RFAGC

D10

1

MDY

RED

OG

PL

BLK

REFO1

PU+3V

LD1

V3R3

REFO2

X2031

2

3

S905

1NC

234NC

S901

1NC

234NC

CN1011

2

3

4

5

6

7

8

9

10

11

12

13

14

15

C306

NM

Q102

R29

4

220

S903

1NC

234NC

C307

(1608)

1u

R28

324

R28

224

US

BX

TA

L

1

/US

BX

TA

L

2

GN

DQ

3

DM

4

DP

5

VD

DQ

6

/8S

NS

7

/12S

NS

8

/HO

ME

9

1099

RA

310

0R

A4

101

RA

510

2R

A6

103

RA

710

4R

A8

105

RA

910

6R

A10

107

RA

1110

8

FD109

TD110

SD111

MD112

EFM113

ASY114

ATEST115

A.VDD1116

A.GND1117

RFI118

AGCO119

C3T120

AGCI121

RFO122

EQ2123

EQ1124

RF2-125

RF-126

A.GND2127

A.VDD2128

A129

B130

F131

E132

REFOUT133

FE-134

FEO135

ADCIN136

TE-137

TEO138

TE2139

TEC140

LD141

PD142

AD.VDD143

AD.GND144

C26

1

3p

C26

2

3p

(1/1

0SR

,160

8)

(1/1

0W)

MOTOR DRIVER LOGIC TABLELOAD

CLCONT H H L LLOEJ L H - -CONT L L H L

CXX1942

F.ACT:Applying positive voltage to FOP.the lens moves DISC side.

T.ACT:Applying positive voltage to TOP.the lens moves outer circumference.

Land for manual soldering

1 2

(12)

(13)

PICKUP UNIT (P10.5)(SERVICE)

NOTE1) GND.... CD LSI, RFAMP, CPU PGND...Actuator, Motor Driver AGND...AudioThese GND's are not connected to each other on PCB.PGND is connected to a floating mechanism part by a screw.

HOME

8SNS

DSCSNS

CSN1067-A

CSN1068-A

CSN1068-A

NM

UNR511MG

2SA1577

NM

NM

BA5839FP

EJ PLAY OFF

CSS1753

48.000 MHz

NM

NM

CKS4808

SWITCHES:CD CORE UNIT S901:HOME SWITCH.........ON-OFF S903:DSCSNS SWITCH.....ON-OFF S905:8EJ SWITCH..............ON-OFF

The underlined indicates the switch position.

1

2

39

a

7

8 4

5

f

c

d

e

F

T

F

T

T

T

F

F

T

F

F

T

T

F

F

T S

S

C

C

S

S

C

C

F

TS

C

F

C

S

T

DEH-2200UB/XSEW5521 2 3 4

C

D

F

A

B

E

8EJ

DP

USBGND

VD

PGND

GND

R25

8

NM

C26

0 0.1u

R25

610

0k

R25

90

R26

110

0kR

283

24R

282

24D

P5

VD

DQ

6

/8S

NS

7

/12S

NS

8R

A4

101

RA

510

2R

A6

103

RA

710

4

5 6 7 8

C

C-b

BSCK

BRST

RESET

BDATA

BRXEN

BSRQ

ROUT

ROUT

LOUT

CONT

LOE

J

BS

RQ

BR

XE

N

BD

AT

A

BS

CK

CLC

ON

T

RE

SE

T

FLM

D0

VD

SE

NS

HO

ME

RE

SE

T RX

TX

FLM

D0

USBGND

DS

CS

NS

BRST

TX

RX

VD

PGND

GND

GND

GND

GND

GND

AGND

AGND

DP

DM

SW

VD

D

VDD VDD

VDD

VD

D

VDD

LOUT

X201

1

2

3

Q201

TH

201

C20

3

C208 NM

C20

1

(160

8)

NM

C20

20.

1u

C20

40.

01u

C206

0.1u

C207 (1608)0.1u

C211

0.1u

C212

(1608)NM

C21

3

0.1u

C2140.1u

R201

(1608)NM

R20

2

47k

R20

3

(160

8)

R20

422

0

R23

5

47k

R243

(1608)

NM

R25

410

0k

R702

220

C230(1608)

NM

C60

1

NM

C60

2

NM

C70

1

NM

C70

2N

M

C70

5N

M

C70

6

(160

8)NM

C707

NM

C73

0

(160

8)NM

R20

7 0

R208

NM R245

NM

R714

(1608)0

C205(2125)

4.7u

C209

22u

C210 0.1u

C243 (2125)NM

C29

0

0.1u

C294

0.1u

C70

410

00p

R20

6

100k

R20

9

NM

R210

1k

R223

47k

R23

3

10k

R23

4

47k

R244

47k

R24

9

NM

R25

010

0

R25

210

0

R273 10k

R277 10k

R28

0

10k

R29

0

10k

R29

2

2.7k

R29

34.

7k

R701

220

DP

AG

ND

1

DM

BSCK

BDATA

BRXEN

BSRQ

RO

UT

RESET

BRST

CD3VON

RX

LRCKOK

TX

CDMUTE

LOU

T

SC

L

BS

CK

2

SD

A

FLM

D0

TE

ST

IN

TE

MP

RO

M

CN704

12

34

56

78

910

RFOK

MIRR

LOCK

HOLD

GND4 GND1GND3

USBGND

VDD

VD

_1

VD

_2

PGND1PGND2

VDD_2

IC202

CS1

SK2

DI3

DO4 5

GND

6TEST

7NC

8VCC

IC205

1

2

3

4

5

6 7 8 9 10

1112

1314

15

1617181920

C70

310

0p

CN701

1 VD 7.5V

2 VD 7.5V

3 /BSRQ

4 /BRST

5 /BSCK

6 BRXEN

7 BDATA

8 /RESET

9 VDD 3.3V

10 GND GND

11 ROUT

12 AGND GND

13 LOUT

14 GND GND

15 PGND GND

16 DP

17 DM

18 USBGND GND

19 USBGND GND

C2150.1u

DOUT

SCKO

LRCK

R29

5

47k

AG

ND

2

IC201

/HO

ME

9

DS

CS

NS

10

VD

SE

NS

11

TE

MP

12

AD

C.V

DD

13

AD

C.G

ND

14

FLM

D0

15

/RE

SE

T16

/AD

EN

A17

CP

SE

L(/E

JSW

)18

/TE

ST

IN19

CLC

ON

T20

BS

I21

BS

O22

/BS

CK

23

FT

xD24

FR

xD25

BR

XE

N26

/BS

RQ

27

LOE

J28

RO

M29

CP

RD

Y30

/CP

RS

T31

SD

A32

SC

L33

RO

MD

AT

A

34

RO

MC

K

35

RO

MC

S

36

CDMUTE(MCKRQ)

37

LRCKOK38

/PUEN39

CD3VON40

CONT41

F_REGC42

OCI43

PPON44

TEST45

/BRST46

REGS47

C.VDD48

C.GND49

XTAL50

X.GND51

/XTAL52

X.VDD53

DA.VDD154

LOUT55

DA.GND156

REGC57

DA.GND258

ROUT59

DA.VDD260

D.GND61

D.VDD62

REG1663

LRCK64

SCKO65

DOUT66

SVMON067

SVMON168

SVMON269

SVMON370

C33M

71

(/RCS)

72(CK

E)

73/R

AS

74/C

AS

0(LD

QM

)75

/CA

S1(

UD

QM

)76

/WE

77/O

E(/

CA

S)

78R

DB

079

RD

B1

80R

DB

281

RD

B3

82R

DB

483

RD

B5

84R

DB

685

RD

B7

86R

DB

887

RD

B9

88R

DB

1089

RD

B11

90R

DB

1291

RD

B13

92R

DB

1493

RD

B15

94IO

.GN

D95

IO.V

DD

96R

A0

97R

A1

98R

A2

99R

A3

100

CP

RD

Y

CP

RS

T

OCI

PUEN

DP2 DM2

R237 470

SW

VD

D

I/O

34 35 36

7271

MASK/FLASHC243

MASKFLASH

PE5715A

NM

(uPD63790CGJ)

NC1

MODE1/SPI_nSSNC2

nRESET

VCC

NC

3

NC

4

NC

5

NC

6

NC

7VSS

I2C_SCL/SPI_SIMOI2C_SDA/SPI_SOMI

MODE0/SPI_CLKNC8

NC

9

NC

10

NC

11

NC

12

NC

13

NM

NM

NM

NM

2SA1577(QR)

341S2162

iPod CONNECTED MODEL ONLY

NM

CSS160316.934 MHz

NM4.7u

MSC MODEL ONLY

CKS5854

C CD CORE UNIT (S11USB)

ACN651

6

i

j

hg

m

l

k

b

FSIGNAL LINEFOCUS SERVO LINETRACKING SERVO LINECARRIAGE SERVO LINESPINDLE SERVO LINE

T

C

S

DEH-2200UB/XSEW5 535 6 7 8

C

D

F

A

B

E

CD

MU

TE

DP

VDDQ6

/8SNS7

/12SN8

/HOM9

DSCS10

VDSE11

TEMP12

ADC.V13

ADC.G14

FLMD15

/RESE16

/ADEN17

CPSE18

/TEST19

CLCO20

BSI21

BSO22

/BSCK23

FTxD24

FRxD25

BRXE26

/BSRQ27

LOEJ28

ROM29

CPRD30

/CPRS31

SDA32

SCL33

34

35

36

CD

MU

TE

(MC

KR

Q)

3738 l

1 2 3 4

C-a

C-b

C-b

RO

UT

LOU

T

CO

NT

BR

ST

GN

D

AG

ND

VD

D X20

1

1

2

3

C20

8N

M

C20

6

0.1uC

207

(160

8)0.

1u

C21

1 0.1u

C21

2

(160

8)N

M

C213

0.1u

C21

40.

1u

C23

0(1

608)

NM

C601

NM

C602

NM

C20

5(2

125)

4.7u

C20

9 22u

C21

00.

1u

C24

3(2

125)

NM

R21

0

1k

R22

3

47k

CD

3VO

N

LRC

KO

K

RF

OK

MIR

R

LOC

K

HO

LD

C21

50.

1u

DO

UT

SC

KO

LRC

K

IC20

1

S

E

NS

NS

DD

ND

0

T

A

L(/EJSW)

IN

NT

N

Y

T

ROMDATAROMCKROMCS

LRC

KO

K

/PU

EN

39

CD

3VO

N40

CO

NT

41

F_R

EG

C42

OC

I43

PP

ON

44

TE

ST

45

/BR

ST

46

RE

GS

47

C.V

DD

48

C.G

ND

49

XT

AL

50

X.G

ND

51

/XT

AL

52

X.V

DD

53

DA

.VD

D1

54

LOU

T55

DA

.GN

D1

56

RE

GC

57

DA

.GN

D2

58

RO

UT

59

DA

.VD

D2

60

D.G

ND

61

D.V

DD

62

RE

G16

63

LRC

K64

SC

KO

65

DO

UT

66

SV

MO

N0

67

SV

MO

N1

68

SV

MO

N2

69

SV

MO

N3

70

C33

M

71

(/R

CS

)

72

(CKE)73

/RAS74

/CAS0(LDQM)75

/CAS1(UDQM)76

/WE77

/OE(/CAS)78

RDB079

RDB180

RDB281

RDB382

RDB483

RDB584

RDB685

RDB786

RDB887

RDB988

RDB1089

RDB1190

RDB1291

RDB1392

RDB1493

RDB1594

IO.GND95

IO.VDD96

RA097

RA198

RA299

RA3100

RA4101

RA5102

RA6103

RA7

OC

I

PU

EN

R23

747

0

343536

72 71

MA

SK

/FLA

SH

C24

3M

AS

KF

LAS

H

PE

5715

A

(uP

D63

790C

GJ)

CS

S16

0316

.934

MH

z

NM

4.7u

CC

D C

OR

E U

NIT

(S

11U

SB

)

b

FS

IGN

AL

LIN

EF

OC

US

SE

RV

O L

INE

TR

AC

KIN

G S

ER

VO

LIN

EC

AR

RIA

GE

SE

RV

O L

INE

SP

IND

LE S

ER

VO

LIN

E

T C S

DEH-2200UB/XSEW5541 2 3 4

C

D

F

A

B

E

CO

NT

C24

3(2

125)

NM

R21

0

1k

47k

ROMDATAROMCKROMCS

CO

NT

F_R

EG

C42

OC

I43

MA

SK

FLA

SH

NM

4.7u

5 6 7 8

C-a

C-b

C-b

BS

CK

BR

ST

RE

SE

T

BD

AT

A

BR

XE

N

BS

RQ

RO

UT

LOEJ

BSRQ

BRXEN

BDATA

BSCK

CLCONT

RESET

FLMD0

VDSENS

HOME

8EJ

RESET

RX

TX

FLMD0

US

BG

ND

SB

GN

D

DSCSNS

TX

RX

VD

D GN

DP

GN

D

GN

D

GN

D

GN

D

GN

DN

D

AG

ND

DP

DM

SWVDD

VD

DV

DD

VD

D

VDD

LOU

T

Q20

1

TH201

C203

NM

C201

(1608)

NM

C2020.1u

C2040.01u

R20

1

(160

8)N

M

R202

47k

R203

(1608)

R204220

R235

47k

R24

3

(160

8)

NM

R254100k

R256100k

R261100k

R70

2

220

C701

NM

C702NM

C705NM

C706

(1608)

NM

C70

7

NM

C730

(1608)

NM

R207

0

R20

8

NM

R24

5

NM

R71

4

(160

8)0

C290

0.1u

C29

4

0.1u

C7041000p

R206

100k

R209

NM

R233

10k

R234

47k

R24

4

47k

R249

NM

R250100

R252100

R27

310

k

R27

710

k

R280

10k

R290

10k

R292

2.7k

R2934.7k

R70

1

220

DP

AGND1

DM

BS

CK

BD

AT

A

BR

XE

N

BS

RQ

ROUT

RE

SE

T

BR

ST

CD

3VO

N

RX

LRC

KO

K

TX

CD

MU

TE

LOUT

SCL

BSCK2

SDA

FLMD0

TESTIN

TEMP

ROM

CN

704

12

34

56

78

910

GN

D4

GN

D1

GN

D3

US

BG

ND

VD

D

VD_1

VD_2

PG

ND

1P

GN

D2

VD

D_2

IC20

2

CS

1

SK

2

DI

3

DO

45

GN

D

6T

ES

T

7N

C

8V

CC

IC20

5

1 2 3 4 5

6

7

8

9

10

1112131415

16

17

18

19

20

C703100p

CN

701

1V

D7.

5V

2V

D7.

5V

3/B

SR

Q

4/B

RS

T

5/B

SC

K

6B

RX

EN

7B

DA

TA

8/R

ES

ET

9V

DD

3.3V

10G

ND

GN

D

11R

OU

T

12A

GN

DG

ND

13LO

UT

14G

ND

GN

D

15P

GN

DG

ND

16D

P

17D

M

18U

SB

GN

DG

ND

19U

SB

GN

DG

ND

R28324

R295

47k

AGND2

DP

VDDQ6

/8SNS7

/12SNS8

/HOME9

DSCSNS10

VDSENS11

TEMP12

ADC.VDD13

ADC.GND14

FLMD015

/RESET16

/ADENA17

CPSEL(/EJSW)18

/TESTIN19

CLCONT20

BSI21

BSO22

/BSCK23

FTxD24

FRxD25

BRXEN26

/BSRQ27

LOEJ28

ROM29

CPRDY30

/CPRST31

SDA32

SCL33

34

35

36

CD

MU

TE

(MC

KR

Q)

37

LRC

KO

K38

/PU

EN

39

CD

3VO

N4041

CPRDY

CPRST

PU

EN

DP

2D

M2

SWVDD

I/O

343536

NM

NC

1

MO

DE

1/S

PI_

nSS

NC

2

nRE

SE

T

VC

C

NC3

NC4

NC5

NC6

NC7VS

S

I2C

_SC

L/S

PI_

SIM

OI2

C_S

DA

/SP

I_S

OM

I

MO

DE

0/S

PI_

CLK

NC

8

NC9

NC10

NC11

NC12

NC13

NM

NM

NM

NM2S

A15

77(Q

R)

341S

2162

iPod

CO

NN

EC

TE

D M

OD

EL

ON

LY

NM

MS

C M

OD

EL

ON

LY

CK

S58

54

AC

N65

16

i

j

hg

ml k

DEH-2200UB/XSEW5 555 6 7 8

C

D

F

A

B

E

SP

IND

LE M

OT

OR

SO

M

0.1u

C29

3

1000

pB

LK

1

2

GNDQ3

DM4

DP5

VDDQ6

/8SNS7

/12SN8

/HOM9

DSCS10

VDSE11

TEMP12

13

143

AD

.GN

D14

4

S

1 2 3 4

C-b

C-a

C-a

C-b

1T

OP

2F

OP

3F

OM

4T

OM

5M

D6

A+C

7V

R8

VR

EF

9P

1+P

610

GN

D11

P5+

P10

12V

CC

13B

+D14

LD+

15LD

-

FO

CU

S A

CT

TR

K A

CT

P4

LD

VC

C

P8

P2

P1

P6

P5

P10P3

P9

P7

MD

HO

LOG

RA

M U

NIT

E:P

5+P

10F

:P1+

P6

M1

CX

E22

73P

D

EFBD

AC

MD

SD

FD

TD

BD EF

AC

TO

M

FO

M

FO

P

TO

P

PD

REFOUT

RE

FO

UT

GN

D

GN

D

VD

DV

DD

Q10

1C102

NM

C213

C21

6

3300

p

C21

70.

1u

C21

8

0.04

7u

C21

90.

1u

C22

018

00p

C22

1

0.1u

C22

40.

1u

C22

6

68p

C22

7

47p

C23

60.

1u

C24

0

C250

1000p

C251

1000p

R22

110

k

R22

2

10k

R22

5

10k

R226

39k

C105C110

C111

NM

R10

6N

M

R108

NM

R23

6N

M

C106

(2125)4.7u

C22

256

p

C2234p

C22

8

0.01

u

C22

90.

1u

C23

922

p

R1012.4

R1022.4

R1032.7

R10

4

2.2k

R107

1MEG

R2144.7k

R2164.7k

R227

5.6k

R22

81.

2k

R229

4.7k

R23

2

1.2k

R29

1

2.7k

AD

IN TE

TE

C

FE

RF

O

AT

ES

T

LD

F

B+D

PD

E

A+C

RF

AG

C

D101

RE

FO

1

PU

+3V

LD1

V3R

3

CN

101

123456789101112131415

Q10

2

USBXTAL/USBXTAL

S

E

NS

NS

96RA0

97RA1

98RA2

99RA3

100RA4

101RA5

102RA6

103RA7

104RA8

105RA9

106RA10

107RA11

108

FD

109

TD

110

SD

111

MD

112

EF

M11

3A

SY

114

AT

ES

T11

5A

.VD

D1

116

A.G

ND

111

7R

FI

118

AG

CO

119

C3T

120

AG

CI

121

RF

O12

2E

Q2

123

EQ

112

4R

F2-

125

RF

-12

6A

.GN

D2

127

A.V

DD

212

8A

129

B13

0F

131

E13

2R

EF

OU

T13

3F

E-

134

FE

O13

5A

DC

IN13

6T

E-

137

TE

O13

8T

E2

139

TE

C14

0LD

141

PD

142

AD

.VD

D

(1/10SR,1608)

(1/10W)

CX

X19

42

F.A

CT

:App

lyin

g po

sitiv

e vo

ltage

to F

OP

.th

e le

ns m

oves

DIS

C s

ide.

T.A

CT

:App

lyin

g po

sitiv

e vo

ltage

to T

OP

.th

e le

ns m

oves

out

er c

ircum

fere

nce.

12

(12)

(13)

PIC

KU

P U

NIT

(P

10.5

)(S

ER

VIC

E)

NO

TE

1) G

ND

.... C

D L

SI,

RF

AM

P, C

PU

PG

ND

...A

ctua

tor,

Mot

or D

river

AG

ND

...A

udio

The

se G

ND

's a

re n

ot c

onne

cted

to e

ach

othe

r on

PC

B.

PG

ND

is c

onne

cted

to a

floa

ting

mec

hani

sm p

art b

y a

scre

w.

NM

UN

R51

1MG

2SA

1577

NMNM

CK

S48

08

f

c d

F T F T

TTFF

T F F T

F C ST

DEH-2200UB/XSEW5561 2 3 4

C

D

F

A

B

E

p

C22

8

0.01

u

R29

1

2.7k

TE

TE

C

XTALXTAL

TE

O13

8T

E2

139

TE

C

d

5 6 7 8

C-a

C-b

C-b

C-a

M2

CX

C40

26LO

AD

ING

/CA

RR

IAG

EM

OT

OR

M1

CX

E22

73S

PIN

DLE

MO

TO

R

VDSENS

HOME

8EJ

DM

DP

PD

RE

FO

UT

TD

FD

CONT

FO

P

FO

M

TO

M

TO

P

SOM

SOP

LCOM

LCOP

LOE

J

CLC

ON

T

SD

DS

CS

NS

8EJ

SO

M

SO

P

LCO

M

LCO

P

MD

US

BG

ND

HO

ME

DSCSNS

VD

SE

NS

VD

VD

VD

VD

PGND

PGND

PG

ND

GN

DG

ND

X20

5

IC30

1

VR

1

OP

IN2+

2

OP

IN2-

3

OP

OU

T2

4 5O

PIN

1+

6O

PIN

1-

7O

PO

UT

1

29F

IN1

9M

UT

E10

Pow

Vcc

1

11V

O1-

12V

O1+

13V

O2-

14V

O2+

8G

ND

1

15V

O3+

17V

O4+

18V

O4-

19P

owV

cc2

20G

ND

2

21C

NT

22LD

IN

23O

PO

UT

SL

24O

PIN

SL

25O

PO

UT

3

26O

PIN

3-

27O

PIN

3+

28P

reV

cc

16V

O3-

30F

IN2

TH201

C203

C263NM

C708

NM

R258

NM

C20201u

C24

0

0.1u

C2600.1u

C303

4700p

C3040.022u

C711

0.1u

R203

(1608)

R254100k

R256100k

R2590

R261100k

R307

18k

R30

8

18k

R31

0

18k

R309

18k

C30

5

NM

C709

NMC710

NM

C29

3

1000

p

C30

8

(160

8)NM

R240

(1608)

47k

R241

10k

R28

4

15k

R28

5

15k

TEMP

CLC

ON

T

VD

SE

NS

MD

X

LOE

J

TIN

CO

NT

HO

ME

8SN

S

TOM

DS

CS

NS

FOM

FOP

SIN

TOP

FIN

CIN

MD

Y

RE

D

OG

PL

BLK

RE

FO

2

X20

31

2

3

S90

5

1

NC

2

34

NC

S90

1

1

NC

2

34

NC

C30

6 NM

R294

220

S90

3

1

NC

2

34

NC

C30

7

(160

8)

1u

R28324R28224

USB

1

/USB

2

GNDQ3

DM4

DP5

VDDQ6

/8SNS7

/12SNS8

/HOME9

DSCSNS10

VDSENS11

TEMP12

13

140

LD14

1P

D14

2A

D.V

DD

143

AD

.GN

D14

4

C261

3p

C262

3p

MO

TO

R D

RIV

ER

LO

GIC

TA

BLE

LOA

DC

LCO

NT

H

H

L

L

LOE

J

L

H

-

-

CO

NT

L

L

H

L

Land

for

man

ual s

olde

ring

12

HO

ME

8SN

S

DS

CS

NS

CS

N10

67-A

CS

N10

68-A

CS

N10

68-A

BA

5839

FP

EJ

PLA

YO

FF

CS

S17

53

48.0

00 M

Hz

NM

NM

NM

SW

ITC

HE

S:

CD

CO

RE

UN

IT S

901:

HO

ME

SW

ITC

H...

......

ON

-OF

F S

903:

DS

CS

NS

SW

ITC

H...

..ON

-OF

F S

905:

8EJ

SW

ITC

H...

......

.....O

N-O

FF

The

und

erlin

ed in

dica

tes

the

switc

h po

sitio

n.

1239 a

7 84 5

e

TFF TSSCC

S S CC

FTS C

DEH-2200UB/XSEW5 575 6 7 8

C

D

F

A

B

E

1 2 3 4

10.4 WAVEFORMS

- CD CORE UNIT Note : 1. The encircled numbers denote measuring points in the circuit diagram.2. Reference voltage REFO1(1.65 V)

500 ms/div5 V/div5 V/div5 V/div10 V/div

�DSCSNS�CLCONT�LOEJ�VD

5 V/div5 V/div5 V/div5 V/div

�DSCSNS�8SNS�12SNS�LOEJ

5 V/div5 V/div5 V/div5 V/div

500 ms/div�DSCSNS�8SNS�12SNS�LOEJ

500 mV/div500 mV/div

200 ms/div�TEFE

200 mV/div2 V/div2 V/div

500 ms/divFIN�RFOK(MONI_2)�SIN

1 V/div500 mV/div1 V/div

1 s/div

500 ms/div

�SIN CIN�TIN

2 V/div500 mV/div

5 us/div�MDX�SIN

2 V/div500 mV/div

200 ms/div�MDX�SIN

500 mV/div500 mV/div500 mV/div500 mV/div

20 ms/divFEFIN�TE�TIN

1 V/div500 mV/div500 mV/div

500 us/div�RFAGC�TE�TIN

500 mV/div500 mV/div

2 ms/div �TE�RFAGC

500 mV/div500 mV/div

200 ms/divFINFE

Source On setup operation12 cm CD-DA Source On setup operation

CD-DA Play operation Spindle waveform during play operation Spindle waveform during play operation(Wider)

Focus Search waveform Track Open waveform 1 Track Jump waveform

12 cm CD-DA setup operation after loading

12 cm CD Loading operation 12 cm CD Loading operation 8 cm CD Loading operation

Ref.:GND

Mode:Normal

Ref.:GND

Mode:Normal

Ref.:GND

Mode:Normal

Ref.:REFO

Mode:Normal

Ref.:REFO

Mode:Normal

Ref.:REFO

Mode:Normal

Ref.:REFO

Mode:TEST

Ref.:REFO

Mode:TEST

Ref.:REFO

Mode:TEST

Ref.:REFO

Mode:Normal

Ref.:REFO

Mode:Normal

Ref.:REFO

Mode:Normal

DEH-2200UB/XSEW5581 2 3 4

C

D

F

A

B

E

5 6 7 8

1 V/div500 mV/div500 mV/div

2 ms/div�RFAGC�TE�TIN

1 V/div500 mV/div500 mV/div

500 us/div�RFAGC�TE�TIN

1 V/div500 mV/div500 mV/div

500 us/div�RFAGC�TE�TIN

5 V/div5 V/div5 V/div5 V/div

500 ms/div�DSCSNS�8SNS�HOME�LOEJ

1 V/div1 V/div

200 us/div�LOUT�ROUT

1 V/div1 V/div1 V/div2 V/div

200 ms/div�RFAGC�TE CIN�SIN

1 V/div1 V/div1 V/div1 V/div

500 us/div�RFAGC�TIN�TEFIN

5 V/div5 V/div5 V/div5 V/div

500 ms/div�DSCSNS�8SNS�HOME�LOEJ

5 V/div5 V/div5 V/div

500 ms/div�DSCSNS�CLCONT�LOEJ

12 cm CD Eject operationAnalog audio waveform

12 cm CD Eject operation 8 cm CD Eject operation Black dot(800 um) during play

Search operation(Outter to Inner)

4 Tracks Jump waveform 10 Tracks Jump waveform 32 Tracks Jump waveform

Ref.:REFO

Mode:TEST

Ref.:REFO

Mode:TEST

Ref.:REFO

Mode:TEST

Ref.:GND

Mode:Normal

Ref.:REFO

1 V/div1 V/div

50 ms/div�DP�DM

2 V/div2 V/div

50 ms/div�DP�DM

1 V/div1 V/div

50 ns/div�DP�DM

USB Play USB device inserting to USB connector. CD Play with USB(iPod) device connecting.

Ref.:USBGNDRef.:

USBGND

Ref.:USBGND

Mode:Normal

Ref.:GND

Mode:Normal

Ref.:REFO

Mode:Normal

Ref.:GND

Mode:Normal

Ref.:AGND

Mode:Normal

DEH-2200UB/XSEW5 595 6 7 8

C

D

F

A

B

E

1 2 3 4

2 V/div2 V/div2 V/div

500 ms/div�CPRST�SDA�SCL

2 V/div2 V/div

50 ms/div�DP�DM

ACC OFF with USB(iPod) device connecting. iPod Authentication Operation

Ref.:USBGND

Ref.:GND

DEH-2200UB/XSEW5601 2 3 4

C

D

F

A

B

E

5 6 7 8

DEH-2200UB/XSEW5 615 6 7 8

C

D

F

A

B

E

60

1

1 R30

2R

303

1

C335

1 2 3 4

11. PCB CONNECTION DIAGRAM11.1 TUNER AMP UNIT

A

A TUNER AMP UNIT

CapacitorConnector

P.C.Board Chip PartSIDE B

SIDE A

NOTE FOR PCB DIAGRAMS1.The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic dia- gram.2.Viewpoint of PCB diagrams

10 20 30 40 50X

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

Y

51

1

1

1

1

5

1

1

1

R25

1

R25

2

R25

3

R25

4

R25

5

R25

6

R25

7

R25

8

CN251

C25

1

C25

2

C253

C254

C25

5

C25

6

C257C258

C25

9

Q301

L501

Q351

R301

R501

R502

R503

R504R505

R506

R507

C501

C502

C503

C504

C505

C506

C313

R35

R352

R353

C711

R94

1

C712

R94

2 C336

C337

CN941

FU

251

C351

C94

1

C94

2

D501

D502

IC501

Q251Q252

IC712

W.REM

RCA

DEH-2200UB/XSEW5621 2 3 4

C

D

F

A

B

E

50

C257

R301

C313

R3

R3

C337

5 6 7 8

A

SIDE A

60 70 80 90 100 110 120 130 140 150 160

E1 5

1 5

10

1 5

10

15

20

1 515

0201

1

1 5

10

15

1

1 5 10

1520

1

1

E

E

1

15

1015

20

1551

10

1

5

E

EE E

E

1 5

10

15

20

25

1

01 5 1

R401

R404

R405

D751

R406R407

R213

R408

R409

Q851

R601

R602

R60

3

R604

R410

R605

R411

D951

R412R

606

D952

R413

R607

R608

R609

R221

R22

2

R801

R80

2

R803

R80

4

R610

R80

5

R611

L851

R612

R806

CN402

R613

R80

7

R808

R61

5

R809

R616R617

R618R619

R81

0

R81

1

R81

2

CN602

R81

3

R81

4

Q680R

620

R81

5

R81

6

R62

2

R817

R623

R81

8

R819

C201

IC951

C202

C203

C204

C205

C206

C207

R820

C401

C402

C403

C404

C405

C406

C212

C407

C213

C408

C214

C409

C215

C216

R83

1

C60

1

R83

2C

602

C603

C410

C411

C60

5

C606

C412

R83

6

R643

C60

7

R837

C413

C414

C60

8

C609

C415

C416

C417

C80

1

C802

C803

C610

C804

C611

X601

C805

C61

2

C806

C613

C807

C614

C80

8

C615

C809

C616

C617

C618

R65

5

C61

9

R65

6

R65

7

C810

R659

CN831

C811

CN832

C812

C813

C62

0

C814

C621

C815

R85

1

C816

C622

R85

2

C817

C623

R853

C81

8

R66

0

C624

R854

C819

R661

C625

R855

R662

C626

R663

C627

R664

C628

R665

C629

R666

C820C821

C822

C63

0

CN651

C63

1

S801

C632

C633

C635

R672

C636

C63

7

R674

C638

R67

5 C63

9

R676R677

R678R679

C640

C641

C642

R680

C645

R681 C647

R683

R685R686R687

R688

Q301

R689

C650

C651

C653

R691

R692D601

D602

IC201

D801

D802

D804

D805

C67

1

D806

C672

D807

L701

L702

IC601

C681

C682

C683

L902

L903

X681

Q921

R30

2R

303

Q751

Q752

D851

Z401

R70

1

R70

2

R703

R704

R70

8

R712

R331

R332R333

R334

R916

C30

1

C30

2

C30

3

C30

4

C30

5

C30

6

C30

7

C30

8

C30

9

R921

JA901

R92

2

R923

R92

4

R925

C31

0

C311

C312

R351

52

53

C70

2

C70

3

C704

AR401

C901

IC691

R751

C909

C331

C332

C333

C334

C910C911

C335

C912

C336

C913

C914 C915

R951

C916

C917

C918C919

C920

C92

1

D301

D302

C751C752

L201

Q601

C951C952

C953

L401

L402

L403

Q801

Q802

Q803

Q804

IC301

D901

L601

D902

L602

L603

L604

L605

ANT401

L606

L607

L608

L609

L801

L802

L610

D911

L611

D912

L612

L613

L614 L615

L616

L617

L618

L619

L620

D92

1

L621

IC911

R201

R20

6

R207

D803

1

10

20

30

40 50 60 70

80

90

100

110120130140

FRONT

FM

/AM

TU

NE

R U

NIT

ANTENNA

B CN1821

C CN701

CORD ASSY

FU 251 (A,5,129) Fuse 3 A CEK1286>

DEH-2200UB/XSEW5 635 6 7 8

C

D

F

A

B

E

80

1 2 3 4

A

A TUNER AMP UNIT

160 150 140 130 120 110 100 90

1

1

11

DEH-2200UB/XSEW5641 2 3 4

C

D

F

A

B

E

0

1

5 6 7 8

A

SIDE B

80 70 60 50 40 30 20 X

150

140

130

120

110

100

90

80

70

60

50

40

30

20

10

0

Y

10

1

DEH-2200UB/XSEW5 655 6 7 8

C

D

F

A

B

E

1 2 3 4

11.2 KEYBOARD UNIT

B

SIDE AB KEYBOARD UNIT

1

5

1

1 5 10 15 20 25 30 35 40

1

1

5

CN

1901

CN

1911

LCD

1801

IC18

02

C18

52

C1853

C1854

C1855

C18

56

C18

58

C18

59

C1860

C18

61

C18

62 C18

63

C18

64

C18

65

C18

66

C18

68

S18

21S

1822

S18

23

S18

24

S18

25S

1826

S18

27

S18

28

S18

29

D18

51

D1852

D1853

D1854

D1855

D1856

D1857

S18

30

D18

58

S18

31

D18

59

S18

32S

1833

S18

34

S18

35

S18

36S

1837

S18

38

D1860

S18

39

D1861

D1862

D1863

D1864

D1865

D1866

D1867

D1868

S18

40

D18

69

S18

41S

1842

S18

43S

1844

S18

45

D18

70

D1871 D1872

D1873

D1874

D1875

D1876

D18

77D

1878

D1879

D1880

D1881

D1882

D1883

D1884

D1885

D1886

D1887

D18

88D

1889

1020

3040

5060

7080

9010

011

012

013

014

015

0X

40 30 20 10

0

Y

160

AU

XU

SB

EJE

CT

LIS

T63

RIG

HT2

1 45

UP

LEF

T DO

WN

SR

C

DIS

P/B

AC

K

BA

ND

/ES

C

PW

R/V

OL

TA

DEH-2200UB/XSEW5661 2 3 4

C

D

F

A

B

E

5 6 7 8

B

SIDE BB KEYBOARD UNIT

160150

140130

120110

10090

8070

6050

4030

20

X

403020100Y

101

5 15

1

2010

1 5 10 15

20 25 30

35

40

45

50 55 60

5

1

1

X1801

C1901

C1902

C1903

C1904C1905

R1901R1902

D1911 D

1912

R1911

R1912

C1801

C1802

CN

1821

D1801

D1802

R1801

R1802

R1803

R1804

R1805

R1806

IC1801

R1821

R1822

R1823

R1824

R1825

R1826

C1851

Q1851

C1857

L1911

C1867

C1869

C1870

R1851

R1852

R1853

R1854

R1855

R1856

R1857

R1858

R1859

R1860

R1861

R1862

R1863

R1864

R1865

R1866

R1867

R1868R1869

R1870

R1871

R1872

R1873

R1874

R1875

R1876

R1877

R1878

VA1901

VA

1902V

A1903

VA1904

AC

N832

DEH-2200UB/XSEW5 675 6 7 8

C

D

F

A

B

E

1 2 3 4

11.3 CD CORE UNIT(S11USB)

C

SIDE AC CD CORE UNIT(S11USB)

1

1

15

101520253035

40

4550

5560

6570

75

80

85

90

95

100

10511

0

115

120

125

130

135

140

1

5

1

5

10

15

20

1 5 10 15

1 5 10 15

1 5 10

1

0151

152025

29

30

R221

R225R226

R234

R237

C201C202

C203

C204

TH201

C206

R243

C207C208

C211

X201

C213

X203

C214

C216

C217

R254

C218

C219

R256R258

R259

C220

C221

C224

R261

C226

C227

C240

R282R283

C250

R294

C260

C263

IC201

IC202

IC205

C290

R307

R308

R309

R310

CN101

R701

R702

C102

CN701

CN704

C303C304

C307

C708

C711

S901

D101

IC301

R201

R202

R203

R204

C251

R222

10 20 30 40 50 60 70X

60

50

40

30

20

10

0

Y A CN651

PICKUP UNIT(P10.5)(SERVICE)

F

E

REFO1M1

SPINDLEMOTOR

M2LOADING/CARRIAGE

MOTORHOME

DEH-2200UB/XSEW5681 2 3 4

C

D

F

A

B

E

5 6 7 8

C

SIDE BC CD CORE UNIT(S11USB)

70 60 50 40 30 20 10X

60

50

40

30

20

10

0

Y

1

E

E

1

1

E

R210

R214

R216

R223

R227

R228

R229

R232

R233

R235

R236

R240

R241

C205

R244

R245

C209

R249

C210

C212

R250

X205

C215

R252

C601

C602

C222

C223

C228

C229

C230

C236

R273

C239

R277

C243

R280

R284

R285

R290

R291

R292

R293

Q101

R295

Q102

C261

C262

C293

C294

R101

R102

R103

R104

R106

R107

R108

R714

C105

C106

C110

C111

C305 C306

C308

C701

C702

C703

C704

C705

C706

C707

C709

C710

C730

S903

S905

Q201R206R207

R208

R209 8EJ

DSCSNS

DEH-2200UB/XSEW5 695 6 7 8

C

D

F

A

B

E

1 2 3 4

12. ELECTRICAL PARTS LISTNOTE: Parts whose parts numbers are omitted are subject to being not supplied. The part numbers shown below indicate chip components. Chip Resistor RS1/_S___J,RS1/__S___J Chip Capacitor (except for CQS.....) CKS....., CCS....., CSZS..... The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Meaning of the figures and others in the parentheses in the parts list. Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding PC board. IC 301 (A, 91, 111) IC NJM2068V

Circuit Symbol and No. Part No.

A:DEH-2200UB/XSEW5

B:DEH-2200UBB/XSEW5

C:DEH-2220UB/XSEW5

D:DEH-2210UB/XSUR

Unit Number : YWM5445(A)

Unit Number : YWM5447(B)

Unit Number : YWM5446(C)

Unit Number : YWM5448(D)

Unit Name : Tuner Amp Unit

Unit Number : (A)

Unit Number : (B)

Unit Number : (D)

Unit Name : Keyboard Unit

Unit Number : (C)

Unit Name : Keyboard Unit

Unit Number : CWX3776

Unit Name : CD Core Unit(S11USB)

A:DEH-2200UB/XSEW5C:DEH-2220UB/XSEW5D:DEH-2210UB/XSUR

AUnit Number : YWM5445(A)Unit Number : YWM5447(B)Unit Number : YWM5446(C)Unit Number : YWM5448(D)Unit Name : Tuner Amp Unit

MISCELLANEOUS

IC 201 (A,102,109) IC PML014A

IC 301 (A,74,141) IC PAL007CIC 501 (A,16,114) IC BD9007FIC 601 (A,117,83) IC PN5034BIC 712 (A,36,123) IC BD6538G

IC 911 (A,141,28) IC BA49181-V12Q 251 (A,21,130) Transistor UMH3NQ 351 (A,31,131) Transistor RT3T22MQ 601 (A,136,63) Transistor 2SD1858Q 751 (A,137,139) Transistor 2SD2396

Q 752 (A,136,128) Transistor RT3T22MQ 801 (A,107,42) Transistor 2SA1036KQ 802 (A,107,38) Transistor RT1N141M-11Q 851 (A,91,124) Transistor(A,B,C)2SA1036KQ 921 (A,127,106) Transistor LSC4081UB

D 301 (A,93,128) Diode 1SR154-400D 302 (A,113,114) Diode 1SR154-400D 501 (A,17,125) Diode 1SR154-400D 502 (A,23,107) Diode RB160L-40D 601 (A,98,100) Diode(A,B,C) RB551V-30

D 602 (A,89,100) Diode(A,B,C) RB751V-40D 751 (A,135,132) Diode HZU7R5(B3)D 801 (A,108,22) Diode MALS068XD 802 (A,108,21) Diode MALS068XD 803 (A,114,21) Varistor EZJP0V270RM

D 804 (A,115,22) Varistor EZJP0V270RMD 851 (A,94,122) Diode(A,B,C) MC2848-11D 901 (A,133,123) Diode 1SR154-400D 902 (A,127,117) Diode 1SR154-400D 911 (A,113,56) Diode 1SR154-400

D 912 (A,113,53) Diode 1SR154-400D 921 (A,123,106) Diode HZU6R2(B3)L 401 (A,146,54) Inductor LCTAW2R2J2520L 402 (A,146,97) Inductor LCTAW2R2J2520L 403 (A,146,57) Inductor CTF1473

L 501 (A,29,110) Choke Coil 47 uHCTH1420L 604 (A,126,68) Chip Coil LCTAW1R0J2520L 607 (A,133,83) Inductor CTF1379L 608 (A,133,72) Chip Coil LCTAW1R5J2520L 609 (A,134,70) Chip Coil LCTAW1R5J2520

L 610 (A,136,77) Inductor LCTAW1R2J2520L 611 (A,138,71) Inductor CTF1379

Circuit Symbol and No. Part No.

DEH-2200UB/XSEW5701 2 3 4

C

D

F

A

B

E

5 6 7 8

L 612 (A,137,69) Inductor CTF1379L 614 (A,122,69) Inductor CTF1379L 617 (A,132,85) Inductor CTF1389

L 618 (A,121,65) Inductor CTF1389L 621 Chip Ferrite Bead CTF1399L 701 (A,93,47) Inductor CTF1713L 702 (A,93,48) Inductor CTF1473L 801 (A,94,31) Inductor LCTAW2R2J2520

L 851 (A,95,125) Inductor(A,B,C) LCTAW2R2J2520L 902 (A,107,140) Choke Coil 600 uHCTH1432X 601 (A,141,78) Oscillator 74.1 MHzCSS1758X 681 (A,114,62) Oscillator 4.7186 MHz(D)CSS1796FU251 (A,5,129) Fuse 3 A CEK1286

AR401 (A,145,110) Surge ProtectorIMSA-6802-01Y900ANT401 (A,153,128) Antenna Jack CKX1070CN251 (A,17,139) Pin Jack YKB5010CN651 (A,85,40) Connector CKS3833CN832 (A,105,3) Connector CKS6188

CN941 (A,38,139) Connector(A,B,C)CKS4124JA901 (A,109,141) Plug CKM1586Z 401 (A,153,105) FM/AM Tuner Unit(A,B,C)CWE2106

(A,153,105) FM/AM Tuner Unit(D)CWE2123

RESISTORS

R 201 (A,118,97) RAB4CQ102JR 206 (A,90,112) RS1/16SS681JR 207 (A,91,105) RS1/16SS681JR 213 (A,90,107) RS1/16SS331JR 221 (A,91,106) RS1/16SS223J

R 222 (A,91,112) RS1/16SS223JR 251 (A,19,131) RS1/16SS223JR 252 (A,24,131) RS1/16SS223JR 253 (A,27,131) RS1/16SS821JR 254 (A,17,131) RS1/16SS821J

R 303 (A,59,132) RS1/16SS153JR 331 (A,71,126) RS1/16SS471JR 332 (A,79,128) RS1/16SS471JR 333 (A,71,128) RS1/16SS471JR 334 (A,78,126) RS1/16SS471J

R 351 (A,57,127) RS1/16SS103JR 352 (A,55,130) RS1/16SS153JR 353 (A,55,129) RS1/16SS221JR 404 (A,129,94) RS1/16SS102JR 405 (A,147,47) RS1/16SS102J

R 406 (A,136,91) RS1/16SS102JR 407 (A,136,90) RS1/16SS102JR 408 (A,140,93) RAB4CQ104JR 409 (A,131,92) RS1/16SS391JR 410 (A,131,91) RS1/16SS681J

R 411 (A,133,91) RS1/16SS681JR 412 (A,131,90) RS1/16SS681JR 413 (A,131,89) RS1/16SS472JR 501 (A,11,114) RS1/16SS473JR 502 (A,11,113) RS1/16SS392J

R 503 (A,22,113) RS1/16SS183JR 504 (A,18,117) RS1/10SR4702FR 505 (A,16,117) RS1/16SS682JR 506 (A,16,120) RS1/10SR1002FR 507 (A,18,120) RS1/10SR471J

Circuit Symbol and No. Part No.R 601 (A,103,89) RS1/16SS473JR 602 (A,101,78) RS1/16SS222JR 603 (A,95,69) RS1/16SS473JR 604 (A,132,87) RS1/16SS681JR 605 (A,122,98) RS1/16SS0R0J

R 606 (A,123,63) RS1/16SS473JR 607 (A,110,49) RS1/16SS473JR 608 (A,131,79) RS1/16SS470JR 610 (A,129,69) RS1/16SS473JR 611 (A,131,76) RS1/16SS182J

R 612 (A,88,115) RS1/16SS563JR 613 (A,130,86) RS1/16SS302JR 615 (A,92,102) RS1/16SS563JR 616 (A,129,97) RS1/16SS104JR 617 (A,116,96) RS1/16SS473J

R 618 (A,129,95) RS1/16SS473JR 619 (A,129,96) RS1/16SS104JR 622 (A,132,80) RS1/16SS0R0JR 643 (A,128,99) RS1/16SS104JR 656 (A,101,70) RS1/16SS104J

R 657 (A,98,70) RS1/16SS104JR 659 (A,103,71) RS1/16SS472JR 660 (A,100,70) RS1/16SS472JR 661 (A,103,83) RS1/16SS221JR 666 (A,136,89) RS1/16SS103J

R 674 (A,102,94) RS1/16SS104JR 675 (A,93,69) RS1/16SS473JR 678 (A,89,101) RS1/16SS103JR 679 (A,99,100) RS1/16SS103JR 680 (A,96,99) (D) RS1/16SS473JR 681 (A,95,101) (A,B,C) RS1/16SS473J

R 683 (A,95,76) RS1/10SR473JR 685 (A,101,97) RS1/16SS104JR 686 (A,104,97) RS1/16SS104JR 687 (A,104,96) RS1/16SS104JR 689 (A,93,74) RS1/16SS0R0J

R 702 (A,94,40) RS1/16SS221JR 704 (A,92,37) RS1/16SS221JR 708 (A,94,35) RS1/16SS104JR 712 (A,94,84) RS1/16SS103JR 751 (A,133,132) RS1/4SA271J

R 802 (A,109,42) RS1/16SS103JR 803 (A,107,40) RS1/16SS562JR 804 (A,98,22) RS1/10SR101JR 805 (A,101,22) RS1/10SR101JR 810 (A,96,26) RS1/10SR222J

R 811 (A,94,26) RS1/10SR222JR 812 (A,111,26) RS1/10SR222JR 813 (A,110,26) RS1/10SR222JR 814 (A,113,26) RS1/10SR222JR 815 (A,114,26) RS1/10SR222J

R 816 (A,92,71) RS1/16SS104JR 817 (A,106,31) RS1/16SS473JR 818 (A,94,69) RS1/16SS104JR 819 (A,90,21) RS1/16SS102JR 820 (A,103,41) RS1/10SR103J

R 831 (A,104,26) RS1/10SR222JR 832 (A,102,25) RS1/10SR222JR 836 (A,91,71) RS1/16SS104JR 837 (A,103,25) RS1/16SS222JR 851 (A,87,125) (A,B,C) RS1/16SS472J

Circuit Symbol and No. Part No.

DEH-2200UB/XSEW5 715 6 7 8

C

D

F

A

B

E

1 2 3 4

R 853 (A,96,122) (A,B,C) RS1/16SS153JR 854 (A,91,122) (A,B,C) RS1/16SS102JR 855 (A,93,120) RS1/16SS473JR 921 (A,129,104) RS1/16SS104JR 922 (A,125,106) RS1/16SS223J

R 923 (A,117,116) RS1/4SA102JR 924 (A,120,106) RS1/16SS473JR 925 (A,121,108) RS1/16SS473JR 941 (A,32,134) (A,B,C) RS1/10SR102JR 942 (A,31,134) (A,B,C) RS1/10SR102J

CAPACITORS

C 201 (A,93,103) CKSSYB224K6R3C 202 (A,92,115) CKSSYB224K6R3C 203 (A,93,104) CKSRYB105K6R3C 204 (A,93,114) CKSRYB105K6R3C 205 (A,110,105) 10 uF CCG1192

C 206 (A,93,112) CKSRYB105K6R3C 207 (A,93,106) CKSRYB105K6R3C 212 (A,93,111) CKSRYB105K6R3C 213 (A,93,107) CKSRYB105K6R3C 214 (A,116,105) 4.7 uF CCG1201

C 215 (A,113,106) CKSSYB104K10C 216 (A,107,102) CCSRCH100D50C 253 (A,43,130) CEVW2R2M50C 254 (A,26,127) CEVW2R2M50C 301 (A,70,129) CKSRYB474K10

C 302 (A,68,129) CKSRYB474K10C 303 (A,76,128) CKSRYB474K10C 304 (A,77,128) CKSRYB474K10C 305 (A,71,132) CKSQYB474K25C 306 (A,69,132) CKSQYB474K25

C 307 (A,75,131) CKSQYB474K25C 308 (A,76,131) CKSQYB474K25C 309 (A,82,127) CKSQYB225K10C 310 (A,84,127) CKSQYB225K10C 311 (A,98,128) CKSRYB104K16

C 312 (A,64,129) CEVW100M16C 313 (A,53,135) CKSRYB104K16C 331 (A,69,125) CCSSCH101J50C 332 (A,79,129) CCSSCH101J50C 333 (A,71,130) CCSSCH101J50

C 334 (A,76,126) CCSSCH101J50C 351 (A,47,136) CEVW330M10C 401 (A,146,58) CCSRCH270J50C 402 (A,143,96) CKSSYB103K16C 404 (A,144,104) CEVW101M16

C 405 (A,143,98) CKSSYB103K16C 409 (A,131,93) CCSSCH100D50C 416 (A,133,92) CCSSCH390J50C 501 (A,8,122) CEVW221M16C 502 (A,9,113) CKSQYB225K16

C 503 (A,21,114) CCSSCH220J50C 504 (A,23,113) CKSRYB153K50C 505 (A,26,119) CEVW221M10C 601 (A,98,88) CKSRYB105K6R3C 603 (A,102,88) CKSSYB103K16

C 605 (A,111,68) CKSSYB104K10

Circuit Symbol and No. Part No.C 606 (A,103,63) CKSSYB103K16C 607 (A,117,69) CKSRYB105K6R3C 609 (A,129,66) CKSRYB331K50C 610 (A,104,49) CEVW101M4

C 611 (A,129,65) CKSRYB331K50C 612 (A,119,69) (A,B,C) CKSRYB105K6R3

(A,119,69) (D) CKSRYB103K50C 613 (A,99,57) CEVW471M10C 614 (A,146,92) CKSSYB102K50

C 615 (A,129,68) CKSRYB331K50C 616 (A,124,70) CKSSYB103K16C 622 (A,130,84) CKSRYB105K6R3C 623 (A,131,75) CKSSYB102K50C 624 (A,130,74) CKSSYB102K50

C 625 (A,134,74) CCSSCH270J50C 626 (A,134,68) CCSSCH270J50C 627 (A,136,72) CCSSCH150J50C 628 (A,134,78) CKSSYB102K50C 629 (A,132,78) CCSSCH4R0C50

C 630 (A,134,76) CCSSCH8R0D50C 631 (A,118,68) CKSSYB223K16C 632 (A,102,93) CKSSYB104K10C 633 (A,120,96) CKSSYB104K10C 635 (A,134,88) CKSSYB104K10

C 640 (A,122,70) CKSSYB104K10C 650 (A,104,45) CKSSYB103K16C 651 (A,127,110)(A,B,C) CCSRCH270J50C 671 (A,91,102) CKSSYB122K50C 672 (A,88,114) CKSSYB122K50

C 681 (A,114,66) (D) CCSSCH270J50C 682 (A,116,66) (D) CCSSCH270J50C 702 (A,95,35) CKSSYB103K16C 703 (A,93,39) CKSSYB104K10C 711 (A,33,122) CKSRYB105K6R3

C 712 (A,39,124) CKSRYB105K6R3C 751 (A,137,132) CKSSYB473K10C 752 (A,143,130) CEVW101M16C 802 (A,99,26) CKSRYB104K16C 803 (A,102,29) CCSRCH221J50

C 804 (A,98,29) CCSRCH221J50C 805 (A,94,21) CKSRYB104K16C 806 (A,94,22) CKSRYB104K16C 807 (A,103,22) CKSRYB104K16C 808 (A,105,22) CKSRYB104K16

C 809 (A,103,21) CKSRYB104K16C 810 (A,111,21) CCSRCH221J50C 811 (A,111,22) CCSRCH221J50C 812 (A,103,38) CKSRYB104K16C 818 (A,96,22) CKSRYB104K16

C 819 (A,91,23) CKSRYB104K16C 820 (A,91,26) CKSRYB104K16C 821 (A,119,26) CKSRYB104K16C 822 (A,90,22) CCSRCH221J50C 901 (A,128,125) 3 300 uF/16 V CCH1732

C 911 (A,124,41) 4.7 uF CCG1201C 912 (A,119,54) CEAT102M16C 913 (A,132,41) CKSRYB104K16C 914 (A,130,45) 4.7 uF CCG1201C 915 (A,142,47) 4.7 uF CCG1201

C 916 (A,142,44) 4.7 uF CCG1201

Circuit Symbol and No. Part No.

DEH-2200UB/XSEW5721 2 3 4

C

D

F

A

B

E

5 6 7 8

C 917 (A,129,40) CKSSYB102K50C 918 (A,141,40) CKSRYB104K16C 919 (A,147,41) CCSRCH680J50C 941 (A,32,138) (A,B,C) CKSRYB103K50

C 942 (A,31,138) (A,B,C) CKSRYB103K50

BUnit Number : (A)Unit Number : (B)Unit Number : (D)Unit Name : Keyboard Unit

MISCELLANEOUS

IC 1801 (B,123,25) IC PD6340AD 1801 (B,96,25) Diode MC2848-11D 1802 (B,100,25) Diode MC2846-11D 1851 (A,163,23) White LED DS2XA4WBETW1(Z1)D 1852 (A,62,21) LED CL-195SR-CD

D 1853 (A,60,12) LED CL-195SR-CDD 1854 (A,68,11) LED CL-195SR-CDD 1855 (A,77,33) LED CL-195SR-CDD 1856 (A,68,28) LED CL-195SR-CDD 1857 (A,60,27) LED CL-195SR-CD

D 1861 (A,26,28) LED CL-195SR-CDD 1862 (A,24,21) LED CL-195SR-CDD 1863 (A,26,11) LED CL-195SR-CDD 1864 (A,13,30) LED CL-195SR-CDD 1865 (A,7,37) LED CL-195SR-CD

D 1866 (A,12,7) LED CL-195SR-CDD 1867 (A,89,8) LED CL-195SR-CDD 1868 (A,77,6) LED CL-195SR-CDD 1869 (A,148,41) LED CL-195SR-CDD 1870 (A,164,41) LED CL-195SR-CD

D 1911 (B,150,17) Diode MALS068XD 1912 (B,148,23) Diode MALS068XX 1801 (B,112,24) Ceramic Resonator 5.00 MHz CSS1731S 1845 (A,43,20) Rotary Switch CSD1153VA1901 (B,159,19) Varistor EZJZ1V270RM

VA1902 (B,157,21) Varistor EZJZ1V270RMVA1903 (B,154,21) Varistor EZJZ1V270RMVA1904 (B,160,19) Varistor EZJZ1V270RMLCD1801 (A,158,33) LCD(A,D) CAW1970

LCD(B) YAW5107

CN1821 (B,109,10) Connector CKS6049CN1901 (A,153,9) Jack YKN5001CN1911 (A,137,9) Connector YKS5036

RESISTORS

R 1801 (B,103,24) RS1/10SR473JR 1805 (B,99,23) RS1/10SR222JR 1806 (B,101,21) RS1/10SR222JR 1821 (B,57,8) RS1/10SR473JR 1823 (B,95,22) RS1/10SR0R0J

R 1824 (B,29,15) RS1/10SR0R0JR 1851 (B,156,24) RS1/4SA681JR 1852 (B,68,28) RS1/4SA821JR 1853 (B,74,28) RS1/4SA821JR 1855 (B,23,22) RS1/4SA821J

Circuit Symbol and No. Part No.

R 1856 (B,26,17) RS1/4SA681JR 1857 (B,81,15) RS1/4SA102JR 1858 (B,154,24) RS1/4SA222JR 1866 (B,68,18) RS1/10SR0R0JR 1901 (B,158,19) RS1/10SR101J

R 1902 (B,156,19) RS1/10SR101J

CAPACITORS

C 1802 (B,85,16) CKSRYB105K10C 1901 (B,154,20) CKSRYB472K50C 1902 (B,154,18) CKSRYB472K50

BUnit Number : (C)Unit Name : Keyboard Unit

MISCELLANEOUS

IC 1801 (B,123,25) IC PD6340AD 1801 (B,96,25) Diode MC2848-11D 1802 (B,100,25) Diode MC2846-11D 1851 (A,163,23) White LED DS2XA4WBETW1(Z1)D 1852 (A,62,21) LED CL-195PG-CD

D 1853 (A,60,12) LED CL-195PG-CDD 1854 (A,68,11) LED CL-195PG-CDD 1855 (A,77,33) LED CL-195PG-CDD 1856 (A,68,28) LED CL-195PG-CDD 1857 (A,60,27) LED CL-195PG-CD

D 1861 (A,26,28) LED CL-195PG-CDD 1862 (A,24,21) LED CL-195PG-CDD 1863 (A,26,11) LED CL-195PG-CDD 1864 (A,13,30) LED CL-195PG-CDD 1865 (A,7,37) LED CL-195PG-CD

D 1866 (A,12,7) LED CL-195PG-CDD 1867 (A,89,8) LED CL-195PG-CDD 1868 (A,77,6) LED CL-195PG-CDD 1869 (A,148,41) LED CL-195PG-CDD 1870 (A,164,41) LED CL-195PG-CD

D 1911 (B,150,17) Diode MALS068XD 1912 (B,148,23) Diode MALS068XX 1801 (B,112,24) Ceramic Resonator 5.00 MHz CSS1731S 1845 (A,43,20) Rotary Switch CSD1153VA1901 (B,159,19) Varistor EZJZ1V270RM

VA1902 (B,157,21) Varistor EZJZ1V270RMVA1903 (B,154,21) Varistor EZJZ1V270RMVA1904 (B,160,19) Varistor EZJZ1V270RMLCD1801 (A,158,33) LCD CAW1970CN1821 (B,109,10) Connector CKS6049

CN1901 (A,153,9) Jack YKN5001CN1911 (A,137,9) Connector YKS5036

RESISTORS

R 1801 (B,103,24) RS1/10SR473JR 1805 (B,99,23) RS1/10SR222JR 1806 (B,101,21) RS1/10SR222JR 1821 (B,57,8) RS1/10SR473JR 1823 (B,95,22) RS1/10SR0R0J

R 1824 (B,29,15) RS1/10SR0R0J

Circuit Symbol and No. Part No.

DEH-2200UB/XSEW5 735 6 7 8

C

D

F

A

B

E

1 2 3 4

R 1851 (B,156,24) RS1/4SA681JR 1852 (B,68,28) RS1/4SA821JR 1853 (B,74,28) RS1/4SA821JR 1855 (B,23,22) RS1/4SA561J

R 1856 (B,26,17) RS1/4SA561JR 1857 (B,81,15) RS1/4SA102JR 1858 (B,154,24) RS1/4SA222JR 1866 (B,68,18) RS1/10SR0R0JR 1901 (B,158,19) RS1/10SR101J

R 1902 (B,156,19) RS1/10SR101J

CAPACITORS

C 1802 (B,85,16) CKSRYB105K10C 1901 (B,154,20) CKSRYB472K50C 1902 (B,154,18) CKSRYB472K50

CUnit Number : CWX3776Unit Name : CD Core Unit(S11USB)

MISCELLANEOUS

IC 201 (A,31,33) IC PE5715AIC 301 (A,64,27) IC BA5839FPQ 101 (B,9,56) Transistor 2SA1577Q 102 (B,19,47) Digital TR(PNP) UNR511MGX 201 (A,40,20) Ceramic Resonator 16.934 MHz CSS1603

X 205 (B,12,36) Oscillator 48.000 MHz CSS1753S 901 (A,42,53) Switch(HOME) CSN1067S 903 (B,21,12) Switch(DSCSNS) CSN1068S 905 (B,11,25) Switch(8EJ) CSN1068CN101 (A,15,58) Connector CKS4808

CN701 (A,36,10) Connector CKS5854

RESISTORS

R 101 (B,5,59) RS1/10SR2R4JR 102 (B,7,59) RS1/10SR2R4JR 103 (B,8,59) RS1/10SR2R7JR 104 (B,12,52) RS1/16SS222JR 107 (B,17,48) RS1/16SS105J

R 202 (A,47,25) RS1/16SS473JR 204 (A,22,19) RS1/16SS221JR 206 (B,31,27) RS1/16SS104JR 210 (B,51,12) RS1/16SS102JR 214 (B,28,48) RS1/16SS472J

R 216 (B,29,47) RS1/16SS472JR 221 (A,31,49) RS1/16SS103JR 222 (A,33,49) RS1/16SS103JR 223 (B,38,14) RS1/16SS473JR 225 (A,28,48) RS1/16SS103J

R 226 (A,27,48) RS1/16SS393JR 227 (B,25,45) RS1/16SS562JR 228 (B,23,42) RS1/16SS122JR 229 (B,23,44) RS1/16SS472JR 232 (B,25,43) RS1/16SS122J

R 233 (B,19,24) RS1/16SS103JR 234 (A,48,18) RS1/16SS473JR 235 (B,23,32) RS1/16SS473JR 237 (A,42,22) RS1/16SS471J

Circuit Symbol and No. Part No.R 240 (B,49,10) RS1/16S473J

R 241 (B,49,11) RS1/16SS103JR 244 (B,27,28) RS1/16SS473JR 254 (A,19,22) RS1/16SS104JR 256 (A,18,22) RS1/16SS104JR 259 (A,12,23) RS1/16SS0R0J

R 261 (A,14,24) RS1/16SS104JR 280 (B,30,20) RS1/16SS103JR 282 (A,15,28) RS1/16SS240JR 283 (A,15,27) RS1/16SS240JR 284 (B,17,27) RS1/16SS153J

R 285 (B,18,27) RS1/16SS153JR 290 (B,29,20) RS1/16SS103JR 291 (B,16,44) RS1/16SS272JR 294 (A,14,29) RS1/16SS221JR 307 (A,60,33) RS1/16SS183J

R 308 (A,60,35) RS1/16SS183JR 309 (A,58,33) RS1/16SS183JR 310 (A,57,36) RS1/16SS183JR 701 (A,36,21) RS1/16SS221JR 702 (A,22,22) RS1/16SS221J

R 714 (B,30,12) RS1/16S0R0J

CAPACITORS

C 106 (B,12,54) CKSQYB475K6R3C 202 (A,20,26) CKSSYB104K10C 204 (A,21,20) CKSSYB103K16C 205 (B,36,24) CKSQYB475K6R3C 206 (A,37,22) CKSSYB104K10

C 207 (A,40,22) CKSRYB104K16C 209 (B,43,32) CEVW220M6R3C 210 (B,40,27) CKSSYB104K10C 211 (A,42,26) CKSSYB104K10C 213 (A,38,44) CKSSYB104K10

C 214 (A,44,27) CKSSYB104K10C 215 (B,38,31) CKSSYB104K10C 216 (A,26,49) CKSSYB332K50C 217 (A,25,46) CKSSYB104K10C 218 (A,26,48) CKSSYB473K10

C 219 (A,24,44) CKSSYB104K10C 220 (A,24,45) CKSSYB182K50C 221 (A,23,43) CKSSYB104K10C 222 (B,23,43) CCSSCH560J50C 223 (B,23,45) CCSSCH4R0C50

C 224 (A,21,42) CKSSYB104K10C 226 (A,18,41) CCSSCH680J50C 227 (A,18,39) CCSSCH470J50C 228 (B,15,42) CKSSYB103K16C 229 (B,23,37) CKSSYB104K10

C 236 (B,24,37) CKSSYB104K10C 239 (B,25,44) CCSSCH220J50C 240 (A,15,36) CKSSYB104K10C 250 (A,31,50) CKSSYB102K50C 251 (A,33,50) CKSSYB102K50

C 260 (A,17,27) CKSSYB104K10C 261 (B,9,38) CCSSCJ3R0C50C 262 (B,9,34) CCSSCJ3R0C50C 293 (B,15,43) CKSSYB102K50C 303 (A,60,34) CKSSYB472K25

Circuit Symbol and No. Part No.

DEH-2200UB/XSEW5741 2 3 4

C

D

F

A

B

E

5 6 7 8

C 304 (A,58,34) CKSSYB223K16C 307 (A,68,20) CKSRYB105K10C 703 (B,36,14) CCSSCH101J50C 704 (B,40,13) CKSSYB102K50C 711 (A,53,28) CKSSYB104K10

Miscellaneous Parts List

Pickup Unit(P10.5)(Service) CXX1942M 1 Motor Unit(SPINDLE) CXE2273M 2 Motor Unit(LOADING/CARRIAGE) CXC4026

Circuit Symbol and No. Part No.

DEH-2200UB/XSEW5 755 6 7 8