PIN READER for Chrysler.

PIN code reading.

MANUAL

Produced for

European Lockmaster Group

www.lockmaster.de

PIN READER for Chrysler connecting

1. Remove the IMMO Box from vehicle. It locates on the ignition lock and has that view.

2. Desolder two points of coil connection carefully (marked on red color on the photo) and remove the plate from immo box.

3. Find microchip EEPROM 24LC02B (see on photo)

4. Clean the microchip legs from vanish. Connect the clips with microchip. Black point to pin 1 of microchip.

Produced for

European Lockmaster Group

www.lockmaster.de

3. Then the Pin Code will appear on LCD.2. Press the white button «read PIN».1.Connect the PIN Reader device to your PC via USB cable.

PIN READER for Chryslerreading.

Produced for

European Lockmaster Group

www.lockmaster.de

You can choose another variant of operation to read Pin Code. In this course you don’t need to solder IMMO coil out from the IMMO circuit.Connect the cables to control points as shown in the picture.Then press “Read Pin” button.

white wire - to point 1black wire - to point 2blue wire - to point 3red wire - to point 4