pilot scout 2.1 product overview v12 - dingli.com documents/pilot scout... · • supports multiple...

http://www.dingli.com

Powering Network Experience

PILOT SCOUT 2.1 PRODUCT OVERVIEW

V12.11

Powering Network Experience©Dingli (07/22/2016) DL 51211 PV

Contents

2. Product Details

1. Product Overview

3. Test Configuration

4. New Features

5. Main Features

6. Conclusion


Product Overview

Product Overview


Network and Market Requirements

• Multiple indoor sites with potential signal

interference

• Difficulties in detecting potential indoor sites

problems or exceptions

• Relying on customer complaints and feedback to detect network problems

• Time and resources exhausted for manual tests with traditional tool

• Difficulties in long-term continuous tests

• Difficulties in simultaneous multiple indoor sites tests

• Bulky test equipment and difficult to deploy

• Stable indoor voice and data test capabilities

• 24-hour continuous and remote operation

• Portable and easy to deploy

• Able to be concealed

• Built-in battery for continuous operation

without external power supply

• Autonomous data collection

Network performance challenges

Test and measurement challenges

Market Requirements


Test Scenarios

Pilot Scout 2.1 is a portable equipment with built-in test

modules, GPS, Bluetooth, and WiFi , that can be used

for indoor radio network measurement and site

verification testing.

Test Scenarios

Applicable to various indoor test scenarios.

Examples:

• Hotels

• Shopping malls

• Residential areas

• Offices

• Sites

Other Test Scenarios

• Portable Drive Test

Test information can be displayed on the LCD screen of

Pilot Scout and can be used as a portable drive test tool.

• Automatic Drive Test

Geolocation of the test routes can be performed with

GPS antenna connected, and can be used as a drive

test tool.

Customers

• Network operators

• System vendors

• Service providers

• Government authorities such as the

Telecommunications Regulatory Bodies


Product Information

• Compact form factor and portable with small size : 135.5 x 78.5 x 18.8 (mm)

• Light weight: about 215 g (with built-in battery)

• Stable with quiet operation, and 24-hour continuous testing

• Remote control and monitoring

• Flexible configuration with dual test modules and 2/3/4 G technologies supported

• Automatic Call (MOS) and data service tests

• LED screen to display device running status and test event information

• Simultaneous tests supported with dual test modules

• Data upload through WiFi

• Automatic and remote firmware upgrade

Portable with similar size as iPhone 6


Advantages and Values

24-hour continuous and stable operation,

remote management through Pilot Fleet

Unify

Various voice and data tests

Compact and portable with built-in antenna

Active monitoring on user’s wireless network

Applicable to various indoor test scenarios

Able to be used as a portable drive test tool

Improves work efficiency by reducing manual and financial cost

Advantages Values

Test information displayed on the LED screen


Enhanced Features when Compared with Pilot Scout 2.0

Item Pilot Scout 2.1 Pilot Scout 2.0

CPU ARM, quad-core ARM, dual-core

Sound Card Independent dual-channel

PCM or dual-channel DSP

sound card

Single-channel sound card

WiFi 2.4/5.8 GHz 2.4 GHz

GPS chipset Built-in independent GPS

chipset.

Use test module’s GPS


Product Details

Product Details


• Pilot Scout 2.1 supports 2/3/4 G technologies and operates as one of the data collection and measurement probe for

Pilot Fleet Unify system

• Pilot Fleet Unify system is able to remotely manage all DingLi's drive test data collection portfolio through its centralized

device and data management platform.

• Users will be notified of abnormal network events through e-mail or SMS in real time.

System Architecture


Introduction to Pilot Fleet Unify

The Pilot Fleet Unify platform provides remote (and centralized) measurement probes and data management. It is capable of handling large

volumes of data uploaded remotely for storage, automatic processing, reporting and analysis. Users may add and control test devices

through the Web client of Pilot Fleet Unify and perform data post processing and analysis through Pilot Fleet Unify Analyser.

Test

Control

Device

ManagementStatistics

Report

Data Analysis

Data

Management

Apply test

plans in

batches

Dingli test

devicesGenerates statistic

reports

Macro and micro

data analysis

Manages large volumes of data

Device Management Data Management

• Imports multiple devices by

importing an EXCEL file

• Records device status

• GIS real-time monitor

• Sort by test region or device

type

• Sort by region or project

• Powerful search function

• View decoding information

• GIS positioning

Data Analysis

• Macro presentation & Micro

analysis

• System evaluation

• Network optimization

• Test monitoring


Autonomous test measurement probes

Measurement Probes

Pilot RCU

• Qualcomm test module is used for signaling collection.

• The test plan configuration, data files, GIS real-time monitoring, statistics reports can be remotely managed on the

Fleet Unify platform.

• High performance with low power consumption, highly integrated and stable, with Aluminum alloy Shell.

Pilot Scout




• Small and portable with built-in antenna, concealed design, with test status displayed on a small screen

Pilot RCU Light




• High performance with low power consumption, highly integrated and stable, built-in antenna, light weight, test status

displayed on a small screen


Autonomous test measurement probes

Measurement Probes

Pilot Walktour

• Common commercial phones (Android and iPhone) are used for data measurement and signaling collection,

such as iPhone 5s, Galaxy S4

• The test plan configuration, data files, GIS real-time monitoring, statistics reports can be remotely managed on

the Fleet Unify platform.

Traditional drive test measurements tool

Pilot Pioneer

• Supports most common test terminals, such as Samsung, iPhone, Huawei, ZTE, etc.

• Connects test mobile to a laptop to perform test, and display parameters and GIS information in real time.

• Uploads data to Pilot Fleet Unify for remote and centralized management.


Item Description

Voltage and current DC 5V, 2A

Power consumption 5.5 W (standby power: 20 mW, with built-in battery)

Antenna Support built-in antennas for Modem and test modules.

Data upload Modem, WiFi, Ethernet

GPS Built-in GPS antenna; users may select external antenna, or Bluetooth GPS

Working temperature -20 °C to +50 °C

Humidity less than 93% RH, +40 °C

Dimension 135.5 x 78.5 x 18.8 (mm)

Weight 215 g (without battery charger)

Memory capacity 4 GB/8 GB/16 GB

Working hours (using

battery only)90 minutes, 3.7 V/2400 mAh

Specifications


Specifications

Service

Function

Monitoring

Function

Device

Performance

• Supports IOT (Interoperability Test) for 2G/3G/4G

• Supports multiple network technologies: GSM/GPRS/EDGE,

WCDMA/HSPA+,CDMA/CDMA1X/EVDO, TD-SCDMA, and LTE

• Supports Call Test (PESQ), Value Added Services Test, and Data

Test

• Supports real-time data transmission through Modem, WiFi, test

module, and LAN cable

• Checks various test information such as parameters, events,

alarms, and test plans on the Web client of Fleet Unify

• Checks test modules operation status and test information on

the device screen

• Support device reboot and update dial configuration by

sending SMS messages to the device

Pilot Scout

2.1

• 5V voltage, easy to connect mobile power for portable drive tests

• Simultaneous tests without any interference between test modules

• Large storage capacity to meet the requirements for long-term data

and log files’ storage

• Low power consumption to ensure long-term continuous operation


Indicators description

Indicators and Touch Panel

Buttons description

Touch buttons:

• Select options or buttons on the left or select up: Slide from the left to the

right on the touch panel

• Select options or buttons on the right or select down: Slide from the right to

the left on the touch panel

• Back to the previous operation: Press the middle circular button on the

touch panel

No. Description

1 Blue light: being supplied by external power

Green light: being supplied by battery

2 Light flashes in green: Pilot Scout is in test mode.

No light: Pilot Scout is idle.

3 Green light: Pilot Scout is being charged.

No light: Pilot Scout has been fully charged.

1 2 3

Indicator light

LED screen

Touch panel


Interfaces and Buttons

External power point, power button,

and external GPS antenna interface

SIM1 and SIM2 card slot and LAN

cable interface

Test module SIM slot

External power port External antenna interfacePower

Modem SIM slot RJ45 cable interface


Various information such as device

test status and module information can

be displayed on the LED screen. This

is useful when it is used as a portable

drive test tool.

Touch Screen


• Call (MOS)

• ATTACH

• PDP

• Ping

• HTTP Page/Download

• Email

• WAP

• SMS

• FTP (DL & UL)

• Video Streaming

• MMS

• Trace Route

• Speed Test

• Multi-FTP

• HTTP Upload

• HTTP Video Play

• DNS LookUp

• PBM

• CSFB

• Facebook

• VoLTE (mobile to mobile)

Test Services


Supported Modules

20

Module Type Supported Frequencies and Bands

WCDMA/GSMHSPA/UMTS: 850/1900/2100 MHz

EDGE/GPRS/GSM: 850/900/1800/1900 MHz

CDMA CDMA2000, 1X, EVDO: 800 MHZ

FDD-LTE/WCMD/PA+/GSM

FDD-LTE: Band 1 (2100)/4 (AWS170)/17 (700)

UMTS/HSPA+: 800/850/1900/2100 MHz

GSM/GPRS/EDGE: 850/900/1800/1900 MHz

FDD-LTE/WCMD/PA+/GSMFDD-LTE: 800/900/1800/2100/2600 MHz

UMTS/HSPA+: 900/2100 MHz

GSM/GPRS/EDGE: 850/900/1800/1900 MHz

FDD-LTE/WCMD/PA+/GSM

FDD-LTE: Band 1/3/7/8/20

UMTS: Band 1/2/5/6/8

GSM: 850/900/1800/1900 MHz


Supported Modules

21


LTE/UMTS/TDSCDMA/GSM

FDD-LTE: Band 1/3/5

TDD-LTE: Band 38/39/40/41

UMTS: Band 1/5

TD-SCDMA: Band 34/39

GSM: 850/900/1800/1900 MHz

LTE/UMTS/TDSCDMA/GSM

FDD-LTE: Band 1/3/7/17


WCDMA Band 1/2/5/8

GSM: 1900/1800/900/850 MHz

LTE/UMTS/GSM

FDD-LTE: Band 1/2/3/4/5/7/8/20/28

WCDMA: Band 1/2/3/4/5/8

GSM:1900/1800/900/850 MHz

WCDMA/GSM

WCDMA: Band 1/2/5/8

Quad-band EDGE/GPRS/GSM: 1900/1800/900/850 MHz



LTE-A/LTE/UMTS/TDSCDMA/CDMA/GSM

(support LTE-CA)

FDD-LTE: Band 1/2/3/4/5/7/8/20/26/28


WCDMA: Band 1/2/4/5/8

CDMA/EVDO: Band bc0/bc1

GSM: 1900/1800/900/850 MHz

CA: Intra-band contiguous: 2/3/4/7/38/39/40/41

Intra-band non-contiguous: 2/3/4/7/41

Inter-band: 1+3, 1+5, 1+7, 1+8, 1+20, 1+26, 3+5, 3+7, 3+8, 3+20, 3+26,

3+28, 7+20, 7+28, 5+7, 39+41

LTE/UMTS/TDSCDMA/CDMA/GSM

FDD-LTE: Band 1/3


WCDMA: Band 1

CDMA: Band BC0

GSM: 900E/1800

Supported Modules



LTE-A/LTE/UMTS/TDSCDMA/GSM

(support LTE-CA)

FDD-LTE: Band 1/3/5/7/8/18/19/21/28


WCDMA Band 1/5/6/8/9/19

2CC (CA):

1 + 1/5/8/18/19/21

3 + 3/5/7/8/19/28

7 + 5/7/28

21 + 19/21

38 + 38

40 + 40

41 + 41

Supported Modules


Test Configuration

Test Configuration


Test Configuration

Both modules can be used for service tests.

Features

1. When two module are used for service test, data files can

be uploaded by using WiFi or either of the module during a

specific period.

2. Both modules support MOS test.

3. Independent GPS chip and built-in GPS antenna are

supported.

4. Multiple kinds of 2G/3G/4G test modules are available for

users to select.

The type of Pilot Scouts can be identified

by the label on the back of the test

equipment.

Other Features

1. Built-in Bluetooth

2. Built-in WiFi

3. Support Bluetooth GPS

4. MOS (MO/MT)


New Features

New Features in This Version


LTE Test

• Newly supported modules: R1525 and MC7430

• Simultaneous LTE test can be done with two test modules.

LTE theoretic peak rate

Downlink:

• FDD: 300 Mbps

• TDD: 222 Mbps

Uplink:

• FDD: 50 Mbps

• TDD: 26 Mbps


Access Internet Through Wireless Hotspot

The wireless hotspot created by the test

device can be used to access the internet.

• Pilot Watcher may use this wireless

hotspot to access the internet and

refresh the map window.

• This wireless hotspot can be used for

the mobile phone and laptop to access

the internet.

• The transmission rate depends on the

performance of the serving RAT.


Private Server for HTTP Upload Test

• Supports private servers for HTTP Upload test.

• Refers to the appendix in “Pilot Scout 2.1 User Manual V12.11” to create a HTTP Upload server for test.


APP Facebook Test

• Facebook has updated its login protocol.

• Facebook test with the new login protocol is supported in this version.

• The test service name is changed to APP Facebook.

Note:

• Users need to apply for a Facebook account on the Facebook website, use this account to apply for a

corresponding App ID, and write down the App Secret.

• For the operation to apply for a Facebook account, see the Appendix in "A1.Pilot Scout 2.1 User Manual

V12.11".


Main Features

Main Features


Real-Time Indoor Test and Monitoring Scenarios

Voice Test

Test mode:

• Use a test module to perform voice test

• Use the Modem to upload data in real time

Deployment location

• On the third floor of an office building

Data Test

Test mode:

• Use a test module to perform FTP, Http page or ping

test

• Use Modem to upload data in real time

Deployment location

• On the third floor of an office building

Real-time monitoring:

• KPIs: Setup Success Rate, Called Dropped Call, Call

Quality, etc.

• Alarms: Continuous Setup Failure, Called Dropped,

etc.

Real-time monitoring:

• KPIs: Connection Success Rate, FTP

Download/Upload Success Rate/Application Layer

Throughput, http Page Success Rate/Delay, Ping

Success Rate/Delay, etc.

• Alarms: Continuous Dial Failure, Download/Upload

Failure, Continuous Long Delay, Continuous Ping

Failure, etc.


Flexible Test Plan Configuration

• Outer loop containing multiple inner loops

00:00 23:59

…Call

*3

FTP

*5

Call

*3FTP

*5

Call

*3

FTP

*5

Execute test tasks based on the chronological order; each

test task is a sub test loop.

• Test tasks configured based on different time range

FTP HTTP

08:00 12:00 16:00 20:00 24:00

Ping Voice

Only the test task in the specified time range can be executed

and the loop test corresponding to the test task can be

performed.

• Test control based on session count

00:00 08:00 14:00

The completion count can be recorded even in the case of

device power off or rebooting.

12:00

FTP *20 HTTP *50 SMS *10

• Parallel test

Support parallel voice and data tests.

08:00 10:00 14:00

Call

HTTP

FTP

Ping

Test Plans


Used as a Portable Drive Test Tool

Test in crowded area

Test in narrow street or road

• -Data service

• MO-MT MOS test

• GPS measurement route

• Automatic data upload

Hidden: Users may hold the

device or put it in the pocket or

bag to perform test.

• Data service

• MO-MT MOS test

• GPS measurement route

• Durable operation with built-

in and external batteries

• Automatic data upload

Easy to carry: Pilot Scout can

be put in a bag and applicable

to drive tests in narrow streets

or roads where vehicles do not

have access.


1• 24-hour continuous operation with high stability

2• Applicable to indoor test scenarios

3• Built-in antenna, compact and portable

4• LCD screen for easy status and information check

5• Supports multi-network technologies (2G/3G/4G), with industrial modularization design

6• Supports remote control and monitoring, and online firmware upgrade

Conclusion

世纪通信鼎利支持Powering Network Experience

[email protected]

[email protected]

No. 8, the Fifth Technology Road,

Gangwan Avenue, Zhuhai,

519085, P.R. China

0756-3626100 Fax : 0756-3391900Tel :

Email :

pilot scout 2.1 product overview v12 - dingli.com documents/pilot scout... · • supports multiple...

Documents