picture mode standard sound mode standard color temperature … · 2019. 4. 4. · (picture1)...
TRANSCRIPT
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: P rojector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc P ower Adapter ……………………… 1 pc AV Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories Parts
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<
User GuideRioHD-LED-3
RioHD-LED-3
CONTENTSTips ……………………………………………………………………………………1Safety Precautions ………………………………………………………………2Projector Features …………………………………………………………………3Installation ………………………………………………………………………… 4 Standard Setting (Front Projection) ………………………………… 4 Installation Method …………………………………………………………5 Signal Connection Instruction……………………………………………6Remote Control Instruction ……………………………………………………7Image Adjustment …………………………………………………………………8 Focus Adjustment ……………………………………………………………8 Keystone Adjustment …………………………………………………………8Menu Setting………………………………………………………………………… 9 Menu Setting Method ……………………………………………………… 10Troubleshooting ………………………………………………………………… 12Specifications ………………………………………………………………………13Accessories Parts ……………………………………………………………… 15
Tips
1
When you use this projector, please read this manual carefully.
Warning:When turning off the projector, the fans will continue to run for 90 seconds.Before unplugging the power cable, please be sure the fans have stopped in order to avoid damage to the projector lamp.
Remote control battery:Please insert the batteries in correctly. Keep the remote control out of reach ofchildren or pets.
Warning: Do not stare directly into the light of the lens .
Warning : To avoid electrical shock, please do not place the projector undermoist conditions.
152
Safety PrecautionsWarning:Before use, please read this manual carefully. If not operated correctlyit can cause electrical shock or fire. When using or repairing this projector,please comply with the following suggestions:
1. Cleaning Instructions:When cleaning this projector, make surethe power cable is unplugged. Use a soft cloth to clean. Do not use harsh cleansers.2. Accessories:To avoid any damages to the projector, useaccessories enclosed in the package. 3. Environmental Conditions:Do not place the projector in wet or moist conditions.4. Installation:Please place this projector on a stable and leveled areas.
.
.
6. Power:Match power source (220V or 1 10V)7. Ground Cable: 3-pin plug8. Power Cable:Inspect the power cable before plugginginto the power source.9. Lightning:When not in use for long periods of timeor while storms, please unplug the cable.10. Repair:Due to high voltage, do not attempt torepair the projector yourself. Please call a professional technician.11. Heat Sensitive Device:Do not use near other heating devices. Thiscan damage the performance of the projector.
5. Ventillation: For best results, proper ventillation is requiered.Keep filter cleaned or it will cause the projectorto overheat. Rinse the filter monthly.
When you open the projector box, please check for the following items.
Accessory list: Projector ……………………………… 1 unit Remote Control ……………………… 1 pc Power Cable …………………………… 1 pc Power Adapter ……………………… 1 pc AV Cable …………………………… 1 pc VGA Cable …………………………… 1 pc Manual ………………… ………………… 1 pc
Accessories PartsSpecifications
Working condifition Temperature 0℃~+40℃ Humidity 10%~65%
Store condition Temperature -20℃~+60℃ Humidity 10%~90%
Infrared remote control Frequency 38KHz
Projector Size 205*160*70mm Weight 2KG
14
Projector FeaturesFront picture Rear picture Bottom picture
12
3
4
5
1. Power button2. Indicator light
red-standby; green-working3. Ventilation window4. Focus lens5. Interface
6. IR receiver7. VGA 8. Ventilation window
12
13
11
9. USB11. Keystone adjustment12. High-feet adjustment13. Holes for ceiling mount
10. Speaker
3
9
10
7
68
USB
USB
SpecificationsLCD Model 3.5in TFT Native resolution 800x600 Support resolution 1024x768Input Signal Video Component Video,S-Video, HDMI, USB Audio StereoOutput Signal Speaker 1.5Wx2Lens Focus 125mmLamp Model LED Power 50W Life 20,000 hoursImage
Size 50-150in Trapeziod correction ± 15 degree
Input Power Voltage 19V±10% Power consumption 60WPower Adapter Voltage AC110-240V/50-60Hz
VGA,
13
InstallationStandard Setting(Front Projection)
Warning: Please check the following picture to show the trapezoid adjustment.
Incorrect installation, the image on the right is smaller.
Screen
Screen symmetry
axisProjector
Incorrect installation, the image on the left is smaller.
Correctly installation,the image is rectangular.
4
Troubleshooting
12
Installation
5
1 2 Front projectionCeiling mount
Rear projectionCeiling mount
Installation method:Contact a professinal service technician to mount this projector to a ceiling.Follow the instructions belowe for the correct projector positions:
screen projector screenprojector
Warning: 1)To avoid damage beyond repair or bodily injury, secure the projector mount firmly to the ceiling or a stable surface. 2) This projector can only be used in an environment with a temperature that does not exceed the range of 0-35 degree. The projector may malfunction if temperatures vary outside the normal operating range. 3)The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or smoke filled environment. The projector might
malfunction in a moist or wet environment.
4)Proper ventilation can help avoid overheating the projector..
3 4 Front projectionTable mount
Rear projectionTable mount
screen screenprojector projector
Problem: Possible solution(s):
No power Check the power cable
Remote control Allow 5 minutes (between on and off sessions) Check for defective batteries. Replace if needed. Aim directly towards the IR receiver.
does not function
No image Make sure lens cap is removedCheck power cable and source Check input signal
Projector turns off Clean filter automatically
.
...
.
...
Menu Setting
11
InstallationSignal Connection Instruction
6
Pb/Cb Pr/Cr
Y Video
S-Video Audio Out
HDMI IN
Audio inL R
DC IN- +
Left audio input
Right audio input
Component video(Y/PR/PB) port
S-video portAudio out port
Power adapter input port
HDMI input port
VGA
VGA input port
Source switch:1. Press key“source”on remote
control, the screen will showsource (picture 1).
2. Press“∧/∨”key to choose the mode.3. Press“> or OK”key to confirm
(picture1)
Video port
USB
USB
7. Multimedia menu
Photo Music Video Text
Option
OSD language EnglishRestore factory defaultBlendingOSD durationSoftware update (USB)
Menu SettingEnglish/German/ChineseYes or NoOff/Lower/Middle/High
Software update (USB)
Multimedia Play FormatVideo Decoder Audio DecoderFormatType
6. Setting
Off/5 seconds/10 seconds/15 seconds
Remote Control Instruction
7
Menu Setting
Display
7Picture
Picture mode standardColor temperatureAspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
Sound
Sound mode standardBalanceAuto volumeSurround soundEQ
Clock------Off TimeOn TimeSleep Timer
Time
Picture Menu Sound Mode
Time Menu☆
3. Picture Menu 4. Sound Mode 5. Time Menu
Flip horizontal
10
Image Adjustment
Focus adjustments
Keystone correction
8
(1)
(2)////////////////////////////////////////////////////////////////////////////
Screen
High-feet adjustment
High
9
Menu SettingMenu setting method: 1. When projector is on, press the “menu” key. The menu will show on the screen
(picture 1). 2. Press the “ < / > ” key to change menu options to “picture” > “sound” > “time” >
“set up” interface. 3. After menu is confirmed, press “ / ” key to choose sub-title (picture 2). 4. Press “ < / > ” key to adjust the sub-title (picture 3) 5. Press the “menu” key to exit the menu setting.
★ Note:If the function mark is grey, it indicates that this function is not valid.
(picture 1) (picture 2) (picture 3)
When using the projector for the first time, please make the following focus adjustments:
Slowly dial the lens until the image is brought into focus. If a projected picture has keystone distortion, correct image with keystone adjustment. The image becomes trapezoid shape when the screen or projector is not level. Please reposition the projector to improve its angle to the screen.
ScreenHigh
Picture
Picture mode standar
Aspect ratio 4:3Noise reduction middleFlip horizonFlip verticalPC setup
dColor temperature
Picture mode user
MENU
Contrast 0Brightness 50Color 50Sharpness 50Tune 50
<
<