pi booklet software oil
TRANSCRIPT
Main Software ApplicationsUsed In the Oil & Gas Industry
Compiled & Edited
ByJorge Salgado Gomes PhD
November 2012THE PETROLEUM INSTITUTEP.O. Box 2533, Abu Dhabi, United Arab Emirates
Tel: +971 2 607 5100, Fax: +971 2 607 5200E-mail: [email protected]
1
Main Software Applications Used
In the Oil & Gas Industry
Compiled & Edited
By
Jorge Salgado Gomes PhD
November 2012
Software Used in the Oil & Gas Industry
2 Jorge Salgado Gomes
Table of Contents
1. Basin Modelling 5
2. Seismic Acquisition & Processing 7
3. Geophysical Interpretation 10
4. Geology 17
5. Log Interpretation & Petrophysics 23
6. Artificial Intelligence (Expert Systems) 27
7. Geological Modelling 30
8. Geomechanical Modelling 38
9. Reservoir Simulation 42
10. Well Testing 49
11. Reservoir Management 51
12. EOR & SCAL 56
13. Drilling & Geosteering 58
14. Petroleum Engineering 64
15. Production Chemistry 73
16. Engineering 76
17. Economic Analyses 79
18. Risk & Uncertainty Analyses 80
19. Management Tools 85
20. i-Field Applications 89
21. Databases 91
Software Used in the Oil & Gas Industry
3Jorge Salgado Gomes
The purpose of this booklet, which captures several software used in the Oil & Gas industry, is to facilitate the life of all students and young engineers and geoscientists in their future careers. I did not intend to show all software applications. I am sure there are many more which are not referred here. In this booklet I capture, primarily, the most common ones utilized in the upstream sector, i.e., the ones related to G&G, Reservoir Engineering, Petroleum Engineering etc. As far as surface engineering and database applications are concerned, I restricted the list to the most common software only.
The software is grouped by discipline and, within each discipline the list is organized in alphabetical order. This booklet lists, primarily, commercial available software. However, in a few cases, other non commercial software are listed, should the user require to contact the University or service provider. I also avoided describing all sub-modules of a software, to simplify matters.
If the software has multiple capabilities (applications), let’s say seismic interpretation and 3D geostatistical modeling, I listed it in two sections under geophysics and also under geological modeling. If, for instance, the geostatistical modeling is not the main core of the software, I only list it under geophysics section.
Some of the software descriptions, namely expressions like “state-of-the-art”, “most comprehensive” etc, express the vendor’s opinion (via catalogue), not the author’s view point.
I sincerely hope the time I devoted into the preparation of this booklet will add value to your day-to-day business. Hopefully you will be able to find the description of the most common software used in our industry.
Jorge Salgado Gomes
Preface
Software Used in the Oil & Gas Industry
4 Jorge Salgado Gomes
I sincerely thank the contribution of all my colleagues at PARTEX, ADNOC, PI, ADCO and many more at different operating companies around the world, for providing me relevant feedback on their experiences with a large variety of software. I thank PI for sponsoring the publication of this booklet.
DISCLAIMERAll information contained in this booklet has been researched and compiled from sources believed to be accurate and reliable at the time of publishing. However, in view of the natural scope for human and/or mechanical error, either at source or during production, the author accepts no liability whatsoever for any loss or damage resulting from errors, inaccuracies or omissions affecting any part of the publication. All information is provided without warranty, and the author makes no representation of warranty of any kind as to the accuracy or completeness of any information hereto contained.
Acknowledgments
Software Used in the Oil & Gas Industry
5Jorge Salgado Gomes
BasinModBasinMod 2011 provides critical tools necessary for anyone working with either unconventional or conventional resource plays. These include the ability to 1)- determine methane adsorption using Langmuir isotherms, 2)- determine hydrocarbon liquid and vapor fractions with the Flash Calculator, 3)- use logs to calculate Total Organic Carbon (TOC) and Initial TOC, 4)- use Compositional Kinetics to calculate individual hydrocarbon components, 5)- Identify hydrocarbon proneness with the Kerogen Quality Plot and 6)- Compare multiple parameters of multiple wells with Radar Plots.
Vendor: PRA Website: www.platte.com/software/basinmod2011
CERES 2DIt allows explorationists to model sedimentary basins and understand petroleum systems in complex structural environments such as salt-driven tectonic areas, fold-and-thrust belts and deltaic systems. With Ceres we can improve our understanding of petroleum systems and reduced exploration risks.
Vendor: IFP Website: www.beicip.com
PermediaThe software aims at providing geoscientists and engineers with the tools to understand fluid quantifying volumes and fluid properties, and evaluating petroleum containment potential and emplacement patterns. And the same set of tools can be used to evaluate petroleum flow and emplacement ranging from core to basin scales. It is possible to model 3D, multi-scale, multi-million gridcell petroleum transport in a matter of minutes. It can also evaluate migration and storage at a large scale and provide insights into observed composition variations,
Basin Modelling1
Software Used in the Oil & Gas Industry
6 Jorge Salgado Gomes
fluid continuity assessments, and pressure/fluid property compartmentalization. Software toolkits are MPath for basins, MPath for reservoirs, Permedia Viewers and CO2 Toolkit. CO2Toolkit is a new addition to the Permedia software suite. CO2Toolkit will work over the entire range of timescales and length scales applicable to CO2 storage, from prospecting and injection, to monitoring and predicting the residence of stored CO2.
Vendor: Halliburton Website: http://www.permedia.ca/products
PetroModeStructural restoration and petroleum system. It includes back-stripping and structural restoration for reconstruction of the basin to reveal the structural and petroleum system development.
Vendor: Schlumberger based in Aachen/Germany Website: www.slb.com
TemisFlowIt is a new generation basin modeling software developed by IFP Group. It aims at providing explorationists with a software solution able to tackle the new exploration challenges, meet the demand for higher performance tools and bring user-friendliness, model building ease and data management to a new level.
Vendor: Beicip-Franlab Website: www.beicip.com
ThrustPack 2DIt is a 2D finite element numerical modeling able to forward model cross-sections in fold-and-thrust-belt areas. It comprises structural, thermal, and maturity modules.
Vendor: IFP Website: www.beicip.com.com
Software Used in the Oil & Gas Industry
7Jorge Salgado Gomes
GeoMageMulti-focusing technology; Handles diffraction extraction for velocity analysis and separates reflections from diffractions.
Vendor: GeoMage Website: www.geomage.com
GLI3DThis software is used in 2D and 3D seismic processing to for refraction statics solution with ray-tracing and tomographic inversion methodologies.
Vendor: CGGVeritas Website: www.cggveritas.com
GLOBE ClaritasIt is a software package for 2D and 3D land and marine seismic data processing. Designed for maximum flexibility, it gives the user a no-constraints enabling layer for seismic data processing, developed over 20 years by GNS Science, New Zealand’s premier geoscience provider. Version 5.6 of the software has three new modules: SRME2, CHECKGEOM, CVA.
Vendor: GNS Science Website: www.globeclaritas.com
ProMAXProMAX is a seismic data processing toolkit which includes a complete suite of geophysical applications for 2D, 3D, VSP and depth imaging. Specialty geophysical applications include ProMAX® MVA™ Migration Velocity Analysis, ProMAX® 3DPSDM pre-stack depth imaging, ProMAX® VSP and ProMAX® 4D software. ProMAGIC® Server application creates a link between ProMAX and
Seismic Acquisition and Processing
2
Software Used in the Oil & Gas Industry
8 Jorge Salgado Gomes
GeoProbe® application. SeisSpace® software adds major new functionality, usability and performance upgrades that increase the speed and ease of use of ProMAX software
Vendor: Halliburton Website: www.halliburton.com
ProMAX® 4D This 4D software highlights changes in seismic data due to production of the reservoir. It allows users working with time-lapse seismic to remove the non-geologic differences between successive surveys. As a result, users have a better understanding of changes in the reservoir as fluids are produced, which leads to better reservoir management decisions. ProMAX 4D software gives you the tools to remove the “background” differences between seismic data volumes and isolate the differences related to changes in fluid distribution in the producing zone. ProMAX 4D software includes proprietary cross equalization technology jointly developed with 4th Wave Imaging and Chevron Petroleum Technology Corporation, where it was proven on numerous 4D surveys.
Vendor: Halliburton Website: www.halliburton.com
OMEGAOmega Seismic Processing System (SPS) encompasses the industry>s most advanced and comprehensive suite of algorithms and runs on multiplatform technology, ensuring timely turnaround for even the most complex processing projects.
Vendor: Schlumberger Website: www.slb.com
OMNI 3DIt is the industry standard for seismic survey design and modeling. Developed by geophysicists for geophysicists, OMNI 3D is used by hundreds of specialists around the globe for the planning, execution, and analysis of land, marine, transition zone, VSP, and multi-component surveys. OMNI 3D features a superior user interface and a versatile
Software Used in the Oil & Gas Industry
9Jorge Salgado Gomes
multi-project handling capability, both of which allow users to quickly and effectively analyze and monitor their seismic acquisition projects.
Vendor: Gedco Website: www.gedco.com
RadExProComprehensive, easy-to-use seismic reflection, VSP and seismic refraction processing software for near-surface seismics at affordable price.
Vendor: RadExPro Website: www.radexpro.com
ResolveSeismic processing software.
Vendor: Resolve GeoSciences, Inc Website: www.resolvegeo.com
StrataIt is a program used to perform both post-stack and pre-stack seismic inversion. In the classic post-stack domain, STRATA analyzes 2D or 3D post-stack seismic volumes to produce an acoustic impedance volume. In the pre-stack domain, STRATA analyzes angle gathers or angle stacks to produce volumes of acoustic impedance, shear impedance and density.
Vendor: CGGVeritas Website: www.cggveritas.com
VISTASeismic processing, with focus on on-site QC
Vendor: GEDCO Website: http://www.gedco.com
Well Seismic FusionUses pre-stack seismic data to quickly and accurately validate prospects.
Vendor: Halliburton Website: www.halliburton.com
Software Used in the Oil & Gas Industry
10 Jorge Salgado Gomes
ANIVECIt computes synthetic seismograms for anisotropic layercake earth models.
Vendor: Geo-Pacific Corporation Geo-Pacific Corporation, 112 Haokea Drive, Kailua, HI 96734 USA
AFI (AVO Fluid Inversion)It estimates the uncertainty in the fluid predictions from AVO. The program has a seamless add-on to the AVO program. AFI uses Biot-Gassmann fluid substitution, Monte Carlo simulation and Bayesian estimation to build fluid probability maps. These maps can be used to make a quantitative analysis of the probability of exploration success.
Vendor: CGGVeritas Website: www.cggveritas.com
AVOAVO analyzes the fluid content of reservoir rocks through a combination of visual, analytical and modeling processes using both pre-stack seismic and well log data. AVO is started by Geoview and can use the View3D application to view its attribute maps.
Vendor: CGGVeritas Website: www.cggveritas.com
CharismaGeneral seismic interpretation tool, which is part of Geoframe. The functionality of Charisma has been replaced by the more advanced Petrel seismic module.
Vendor: Schlumberger Website: www.slb.com
eLOGA comprehensive well log editing and modeling tool designed to prepare or create log data for use within the
Geophysical Interpretation3
Software Used in the Oil & Gas Industry
11Jorge Salgado Gomes
Hampson-Russell suite of applications. eLOG is launched from each of the Hampson-Russell programs, or can be used as a standalone application.
Vendor: CGGVeritas Website: www.cggveritas.com
EmergePredicts reservoir properties using seismic attributes and well log data. The seismic attributes can either be internally or externally derived, and the target can be any measured or calculated log such as porosity, density or water saturation. Typical external seismic attributes are inversion results from STRATA or AVO attribute volumes.
Vendor: CGGVeritas Website: www.cggveritas.com
GeoProbeIt is a 3D multi-volume interpretation and visualization solution. Tightly integrated with SeisWorks®, PowerView®, Well Seismic Fusion™ and OpenWorks® software, GeoProbe software technology delivers fast interactive interpretation. Interpreters can simultaneously analyze multi-attribute/multivolume seismic, well and cultural data, and reservoir models.
Vendor: LandMark Website: www.halliburton.com
Jason (JGW)The Jason Geoscience Workbench® (JGW) is a complete seismic reservoir characterization package including 3D pre- and post-stack seismic inversion, pre- and post-stack geostatistical inversion, wavelet estimation, model building, plus tools for more advanced analysis, interpretation and 3D visualization.
Vendor: Fugro-Jason Website: www.fugro-jason.com
KingdomFully integrated 2D/3D seismic interpretation system with several modules for velocity analysis (VelPAK), colored
Software Used in the Oil & Gas Industry
12 Jorge Salgado Gomes
inversion, attribute analysis (Rock Solid Attributes), geosteering and many more.
Vendor: SMT (acquired recently by HIS) Website: www.seismicmicro.com/advanced
NORSARThe core application for NORSAR seismic modelling packages are 2D and 3D seismic ray modelling, survey planning, Green>s functions for PSDM, reservoir analysis and time-to-depth conversion based on ray tracing. However, the modular design of NORSAR’s software allows packages to be tailored to individual project requirements.
Vendor: Norsar Innovation AS Website: www.norsar.com
OdegaardIt offers globally optimised seismic inversion of full-stack, angle- stack, intercept-gradient and offset stack 4D and 4C data in both time and depth domain for porosity, fluid and lithology prediction as well as rock properties and AVO modelling.
Vendor: Oedegaard Website: www.oedegaard.com
OpenDtect Complete seismic interpretation system that is released under as licensing scheme completely free as open source software under the GNU GPL license and with zero license fee under a commercial license.
Vendor: OpenDetect organization, parented to DgB Website: http://www.opendtect.org; www.dGBes.com
PETRELIntegrated geoscience modeling software with robust seismic interpretation module. It provides unique facilities for seismic attribute extractions and visualization.
Vendor: Schlumberger Website: www.slb.com
Software Used in the Oil & Gas Industry
13Jorge Salgado Gomes
PGS HyperBeamIntegrates the holoseis velocity model building, interpretation and visualization software with the fully anisotropic (VTT/TTI) AGS beam migration into one system, resulting in dramatic cycle time reductions.
Vendor: PGS Website: www.pgs.com
PostStackThe PostStack™ product family provides a suite of post-stack seismic data processing & interpretation tools designed to extract more information and, therefore, more value from seismic data. The PostStack family includes PostStack, PAL™ and PostStack ESP™ for seismic data optimization, seismic attribute extraction, waveform classification, similarity processing, and acoustic impedance inversion. Leveraging PostStack family technologies in daily interpretation workflows can increase your understanding of the subsurface, reduce project cycle time and improve the accuracy of your interpretation.
Vendor: Halliburton Website: www.halliburton.com
PRO4DIt provides a framework to analyze and interpret time-lapse datasets. Time-lapse, or 4D seismic monitoring, relies on the comparison of 3D surveys that are recorded at different phases of the production process. In many cases, changes in the seismic response can show production-induced changes in the fluid saturation, pressure or temperature in the reservoir rocks.
Vendor: CGGVeritas Website: www.cggveritas.com
PROMCIt is a software package designed to make multi-component interpretation and modeling highly accessible. Conventional P wave seismic data responds to changes in lithology and fluid content, while shear wave data is largely insensitive to fluid changes. This means a combination of P and S wave data can provide additional information and reduce uncertainty in lithology prediction by separating lithology
Software Used in the Oil & Gas Industry
14 Jorge Salgado Gomes
from fluid responses. However, we must correlate the P and S wave data prior to interpretation and this is often a difficult process.
Vendor: CGGVeritas Website: www.cggveritas.com
QuickSEISQuickSEIS provides advanced rapid screening process for 3D seismic provides a rapid analysis of structural and stratigraphic features, including preliminary economic analysis. Using volume-based autopicking (Voxel picking) of an event, the QuickSEIS Plus screening process can produce a targeted high-resolution image of structural and stratigraphic features. Classifying volume attribute anomalies into discrete facies and pore fluid by calibration with well logs and production data enables asset managers to assess and rank potential prospects and infill locations.
Vendor: Schlumberger Website: www.slb.com
RAYFRACTSeismic refraction and cross-hole tomography, velocity structure imaging for engineering and exploration.
Vendor: Intelligent Resources Inc Website: http:/rayfract.com
RockTrace™This software has significantly impacted the way the industry uses and incorporates PSTM seismic. It is the only technology that quantitatively integrates well log elastic rock properties and AVA seismic to produce calibrated quantitative 3D volumes of rock properties. RockTrace builds on the InverTracePlus™ technology by extending it to the AVO domain. In InverTracePlus, the constraints applied are in terms of acoustic impedance (Zp). In RockTrace, the objective is to solve for shear impedance (Zs) and density in addition to acoustic impedance, so the constraints are set for all three parameters independently.
Vendor: Fugro-Jason Website: www.fugro-jason.com
Software Used in the Oil & Gas Industry
15Jorge Salgado Gomes
RokdocSeismic modeling, AvO, 4D, pressure prediction, stochastic inversion
Vendor: Ikon Geoscience Website: http://www.ikonscience.com
Seisbase IIIIt offers powerful, user-friendly tools for depth conversion, velocity modeling and pressure prediction. It features direct links to the Landmark and GeoQuest interpretive workstations.
Vendor: Karl Thompson and Associates Website: www.seisbase.com
SeisRoxThe new modelling concept from NORSAR. Simulate 3D PSDM images that account for survey, overburden and rock properties
Vendor: Norsar Innovation AS Website: www.norsar.com
SeisWareIt is an innovative and dynamic 2D/3D seismic interpretation system, and it is available on a no-risk annual subscription basis.
Vendor: SeisWare Website: www.seisware.com
SeisWorks 3DIt is a seismic interpretation software providing innovative 3D viewing and interpretation capabilities and easy-to-use interpretation productivity tools to support and enhance horizon and fault interpretation. It is largely used in the industry for 3D seismic data analysis and interpretation. Interpreters can work with a 2D project and multiple 3D projects concurrently for great interpretation flexibility.
Vendor: LandMark Website: www.halliburton.com
Software Used in the Oil & Gas Industry
16 Jorge Salgado Gomes
SismageSeismic interpretation; particularly robust in seismic facies analyses.
Vendor: TOTAL Website: www.total.com
SpecDecompIt is a spectral decomposition software. Spectral decomposition technology generates very detailed images by extracting a suite of amplitude maps from a range of frequency slices in the reservoir zone. Each map illuminates peak amplitude response from a different bed thickness.
By selectively combining images from certain frequencies, SpecDecomp technology clearly portrays unique geologic relationships. Animation techniques exploit motion, allowing interpreters to unravel complex variability in reservoir heterogeneities and thickness.
Vendor: LandMark Website: www.halliburton.com
StratimagicIt is the first solution in the petroleum industry to combine computer aided stratigraphic analysis, using neural network technology, with seismic interpretation to aid in facies classification.
Vendor: Paradigm Geophysical Website: www.seismicmicro.com/advanced
VelProIt is a velocity modeling and depth conversion toolbox
Vendor: In-Depth Solutions Website: www.seisvel.com
VoxelGeoIt is a volume visualization and interpretation software application for 3D seismic data.
Vendor: Paradigm Website: www.pdgm.com
Software Used in the Oil & Gas Industry
17Jorge Salgado Gomes
ArcGIS DesktopIt is part of a geographic information system (GIS) software, where data capturing, managing, analyzing, and displaying all forms of geographically referenced information are performed. The system allows the user to view, understand, question, interpret, and visualize data in many ways that reveal relationships, patterns, and trends in the form of maps, globes, reports, and charts.
Vendor: ESRI Website: www.esri.com
ArcGIS ExtensionsGeosoft provides geology and geochemistry workflows to support the work of geoscientists conducting mapping and analysis within Esri ArcGIS. The GIS mapping capabilities within Geosoft ArcGIS extensions work together with geophysical and earth mapping workflows within the Geosoft environment to enable powerful, integrated study of the surface and subsurface.
Vendor: Geosoft Website: www.geosoft.com/solutions/industry/energy
CARBONATE-3DIt is a stratigraphic forward modeling software used to reproduce and predict, over geological time, 3-dimensional stratigraphic geometries and facies in carbonate and mixed carbonate siliciclastic depositional environments. Modeled processes include carbonate platform rim and interior production, basinal sediment production, siliciclastic input, subaerial dissolution and erosion, transport and redeposition of sediment dependent on currents, slope, depth and restriction.
Vendor: The software was developed as part of a PhD program by SedTec modeling group at Royal Holloway, University of London (RHUL).
Geology4
Software Used in the Oil & Gas Industry
18 Jorge Salgado Gomes
Website: http://eswww.rhul.ac.uk/sedtec/Georg/New_Website/
CobraFlowIt is dedicated to the static property modeling and upscaling. It offers both new and experienced geologists solutions to define the best static reservoir model. Working under Windows and Linux operating systems, all the modeling is done through the very user friendly interface of the OpenFlowSuite Platform. Geostat (from CobraFlow) offers the Plurigaussian Simulation method for facies properties, the best one to take into account the non-stationarity of field. In addition, there is a large variety of deterministic and stochastic methods for continuous properties. Upscaling (from CobraFlow) offers all the up-to-date analytic methods, from the classical averages to the generalized Cardwell & Parsons method.
An integrated approach is made possible by linking CobraFlow to PumaFlow, CondorFlow or EasySense, enabling the user to test the sensibility of the geological uncertainties.
Vendor: Vendor: Beicip-Franlab Website: www.beicip.com
CPS-32D mapping package system still used in some oil & gas companies with very robust gridding and contouring algorithms. The interpolators are based on estimation techniques. No geostatistics involved.
Vendor: Schlumberger Website: www.slb.com
DionisosSoftware for stratigraphic modeling. Delivers palaeo-environment reconstructions as well as facies sediment thicknesses and net-to-gross maps.
Vendor: Beicip-Franlab Website: www.beicip.com
EasyTraceIt is a multi-disciplinary 1D data processing and editing tool, featuring advanced spreadsheets and a wide range of
Software Used in the Oil & Gas Industry
19Jorge Salgado Gomes
functionalities for geologists and geophysicists. EasyTrace takes advantage of a true spreadsheet environment that offers advanced 1D data editing, analysis and processing functionalities to help geoscientists in their daily work. Easytrace is now pluged on OpenFlow platform and share all its powerful capabilities with all the OpenFlow Suite Applications, especially CobraFlow and FracaFlow.
Vendor: Beicip-Franlab Website: www.beicip.com
ezModelIt is a structural reservoir framework software enabling geoscientists to generate sealed structural models as a natural extension of the interpretation process. ezModel software solves this problem by bringing framework construction and structural validation tools into the interpretation environment where dynamic links are maintained between the source data and model. The result is a structurally valid interpretation and a sealed structural framework ready for modeling.
Vendor: LandMark Website: www.halliburton.com
FZAPIt is an automated fault interpretation software. With the FZAP! package, automated fault tracking is based on a few seed fault segments and tuning parameters that the user selects. On high-quality seismic data, users can pick fault segments at a few key locations and then let FZAP! Technology extend the fault interpretation throughout the survey.
Vendor: LandMark Website: www.halliburton.com
GM-SYS ModellingGeosoft GM-SYS gravity and magnetic modelling solutions support the modelling of complex subsurface structures, including effective characterisation of sub-salt and sub-sea environments, and the integration of data and models with seismic interpretation for oil exploration.
Software Used in the Oil & Gas Industry
20 Jorge Salgado Gomes
Vendor: Geosoft Website: www.geosoft.com/solutions/industry/energy
Geographix Discovery 5000This software provides new functionality, products and workflow support for unconventional oil and gas asset exploration, planning and development.
This release includes smartSTRAT, a licensed functional extension to smart SECTION that provides the most advanced and integrated horizontal well correlation and geosteering tools available today. It also includes other modules for mapping and data management, geophysics and 3D visualization.
Vendor: Geographix Website: www.geographix.com
Geosoft Oasis MontajIt is ideally suited for today>s multidisciplinary and collaborative exploration. Access all your data and a powerful set of mapping and analysis tools, within one dynamic, 3D exploration environment. Process, map, QA and interpret your ground and airborne survey geophysics, geochemistry and geology.
Vendor: Geosoft Website: www.geosoft.com/solutions/industry/energy
GRAVITASIt is an integrated operational geology system that comprises a number of application modules, including Winlog, a leading log drawing solution. GRAVITAS tools enable the geoscientists to display well related data (logs, cores, facies, images, drilling parameters etc) in an integrated and consistent format. GRAVITAS also supports WITSML standard to receive data from wellsite.
Vendor: HRH Website: www.hrhgeology.com
iPointProvides powerful co-visualization of any wellbore data type, allowing such a varied audience as geoscientists,
Software Used in the Oil & Gas Industry
21Jorge Salgado Gomes
engineers and data managers to benefit from a single tool and interface with tailored workflows.
Vendor: Perigon Solutions Website: www.perigonsolutions.com
LithoTectSpecializes in advance structural restoration and balancing functionality (including decompaction and isostacy)
Vendor: Halliburton Website: www.halliburton.com
MoveSoftware for forward modeling the structural evolution and view in 3D from different orientations.
Vendor: Midland Valley Website: www.mve.com
NeuralogLog correlation, cross-sections, mapping and volumetrics
Vendor: Neuralog Inc Website: www.neurasection.com
PetroSysMappingIt is an integrated geological, geophysical and reserves mapping system for petroleum exploration and production with extensions for seismic intepreted data manipulation and surface computations.
Vendor: Petrosys Pty, Ltd Website: www.petrosys.com.au
RECONMapping, correlations, cross-sections, 3D modeling, seismic integration, volumetrics.
Vendor: AGM Recon Website: www.austingeo.com
RockWorks2002It is a software for creating boring logs, cross sections, fence diagrams, solid models (plume, orebody, oil reservoir),
Software Used in the Oil & Gas Industry
22 Jorge Salgado Gomes
stratigraphic layer models and surfaces, contour maps and terrain models, piper and stiff diagrams, stereonets, rose diagrams, ternary diagrams and much more.
Vendor: Rockware, Inc Website: www.rockware.com
StratWorksSoftware designed to correlate well logs, build and interpret cross sections, and perform lithologic analyses. StratWorks software is also used to create structural, isochore, production, log signature, and facies maps, and for evaluating engineering aspects of a well. It includes session management, advanced correlation and well log correlation capabilities, improved raster log graphic displays, deviated and recumbent well log posting, and interpretation of recumbent sections.
Vendor: Halliburton Website: www.halliburton.com
TargetTarget is geology software for visualising, analysing and managing your drilling projects. With Target you can sharpen your understanding of underlying subsurface geology, and verify assumptions, to increase the value of your drilling investment, and improve prospecting and discovery.
Vendor: Geosoft Website: www.geosoft.com/solutions/industry/energy
WINLOGIntegrate well logs and lithological information to build a composite display.
Vendor: Gaea Technologies Website: www.gaea.ca
Zmap2D mapping package still in use in some oil & gas companies.
Vendor: Halliburton Website: www.halliburton.com
Software Used in the Oil & Gas Industry
23Jorge Salgado Gomes
Elan PlusComprehensive log analysis package. Schlumberger>s ELAN-Plus (ELemental ANalysis) petrophysical program is a general-purpose inverse problem solving computer code that can be used to analyze wellbore data. It will be phased out to be replaced by Techlog software.
Vendor: Schlumberger Website: www.slb.com
eXpressPetrophysical interpretation package (property of Baker Hughes).
Vendor: Baker Hughes Website: www.bakerhughes.com
GeoGraphix® PRIZM™It is a log analysis software ideal tool for performing full reservoir characterization on wells of all sizes and complexity, from basic individual wells to multi-well, multi-zone projects. PRIZM software contains highly customizable and interactive tools for editing data, digitizing log curves, and creating flexible track displays. Its user-defined equations, including more than 250 predefined standard log analysis equations, help generate quick, interactive log calculations. PRIZM software is tightly integrated with the GeoGraphix Discovery Suite of mapping, cross-section, zone analysis, and other geographical applications. It is included in the advanced Discovery Geological Interpretation System or can be purchased separately for use as a stand-alone application
Vendor: GeoGraphix Website: http://geographix.com/solutions/petrophysics
Log Interpretation & Petrophysics
5
Software Used in the Oil & Gas Industry
24 Jorge Salgado Gomes
GeologIt is a product suite that provides advanced petrophysical analysis tools, powerful presentation graphics, flexible modularity combined with an easy-to-use environment, well data management and geological interpretation.
Vendor: Paradigm Website: www.pdgm.com
ImpetusBased on Recall’s proven log image loading, processing and interpretation software, Impetus delivers an advanced, controlled user environment for image interpretation. Impetus is focused on guidance, visualization and ease of use, while at the same time providing a familiar “Windows-like” interface for all operations
Vendor: Petris Technology Inc Website: http://www.petris.com/impetus
IMpressIMpress is ISI>s software product for well log interpretation and petrophysics. IMpress uses Artificial Intelligence and Data Mining techniques to create synthetic well logs and MRI logs as well as synthetic VSP. IMpress provides advance technologies for correlating well logs with results of core analysis such as permeability and effective porosity. It also provides means for SCAL analysis and rock typing.
Vendor: Intelligent Solutions, Inc. Website: www.IntelligentSolutionsInc.com
Interactive PetrophysicsInteractive Petrophysics ™ was designed by a Petrophysicist and it is different by design. It is portable, quick, versatile and easy-to-use log analysis software ideal for both geologists wanting to do a quality check of their log data and experienced petrophysicists carrying out multi-zone, multi-well petrophysical field analyses. This product is truly unique in its approach to petrophysics.
Vendor: Senergy Website: www.senergy.com
Software Used in the Oil & Gas Industry
25Jorge Salgado Gomes
PetrologIt is a specialised log data management, petrophysical and imagelog analysis software platform that performs many of the tasks associated with the management and evaluation of well log data.
Vendor: Weatherford International Website: www.petrolog.net
PetroWorksPetrophysical interpretation software
Vendor: LandMark Website: www.halliburton.com
PowerLog®It is a Microsoft Windows-based suite incorporating petrophysics, rock physics, and mineralogy into an easy to learn and use application for petrophysical well log interpretation.
Vendor: Fugro-Jason Website: www.fugro-jason.com
RecallIt is an application database for well related data (logs, image data, cores etc).
Vendor: Petris Technology Inc Website: http://www.petris.com
Rt-ModRt-Mod’s automated inversion modeling for resistivity logs produces more accurate values for Rt and Rxo at one-half meter resolution for most logs. It corrects for the effects of thin beds, bed shoulders, invasion, borehole conductivity, washouts, and dipping beds.
Vendor: Petroleum Software Technologies Website: www.pstware.com
SP-MODPST’s SP-MOD uses advanced forward and inverse modeling to correct the SP (Self Potential log) for environmental
Software Used in the Oil & Gas Industry
26 Jorge Salgado Gomes
effects at a significantly improved one-half meter vertical resolution. Using an existing SP and resistivity log, the operator inputs the mud resistivity and bit size information into the application. Using this data, SP-Mod generates a corrected SP that can be used to accurately calculate formation water resistivity, even in hydrocarbon-bearing zones that do not produce formation water samples.
Vendor: Petroleum Software Technologies Website: www.pstware.com
TechlogTechlog Interactive Suite 2011 integrates petrophysics (core and log), geosciences and engineering data, in a versatile manner using cross-domain workflows based on a data management layer. It is probably one of the most suitable log analysis software with powerful utilities for reservoir rock typing. Initially developed by Techsia, the software is now part of the Schlumberger portfolio.
Vendor: Schlumberger Website: www.slb.com/services/software
TerraStationPetrophysical software
Vendor: LandMark Website: www.halliburton.com
Software Used in the Oil & Gas Industry
27Jorge Salgado Gomes
AvocetThe flexible Avocet Workflow Technologies, (formerly DECIDE! Data Hub) readily integrate with production applications and data repositories. Advanced analytical tools further improve operational performance. Avocet provides the tools for advanced data mining, artificial intelligence, and petroleum engineering analysis. Avocet Workflow Technologies are open so that you can incorporate the processes and results from your own in-house and third-party engineering applications.
Vendor: Schlumberger Website: www.slb.com/services/software
FEEThe «Fuzzy Expert Exploration (FEE)” Tool is a state-of-the-art exploration «expert» tool, relying on a computerized database through the use of «fuzzy» logic, a relatively new mathematical treatment of imprecise or non-explicit parameters and values. Oil prospecting risk can be reduced with the use of a properly developed and validated data. The Fuzzy Expert Exploration Tool will eventually be generalized so that users in any part of the world will be able to add their own knowledge and data and make rapid evaluations of a large number of potential drilling sites in a systematic and consistent manner via the internet.
Provider: The Department of Energy (USA) Website: www.netl.doe.gov/technologies/oil-gas/software
ICSThe Intelligent Computing System (ICS) is a set of oil exploration software tools for reservoir characterization from 3D seismic data and conventional well information. Features include: Fast reservoir characterization from seismic
Artificial Intelligence (Expert Systems)
6
Software Used in the Oil & Gas Industry
28 Jorge Salgado Gomes
data, Applicable for any reservoir setting that yields seismic attribute variation (ie: amplitude, frequency, etc.) with reservoir changes of porosity, thickness and fluid saturation, Transform multiple seismic attributes to reservoir attributes such as thickness and porosity by clustering, neural net and classical regression methods, quickly identify seismic attributes with greatest correlation to identified reservoir properties, compute structural and stratigraphic entrapment potential, predict production potential and water-cut from reservoir characterization and entrapment, combine multiple output for neural net, fuzzy logic or subjectives ranking, quality maps of results.
Provider: The Department of Energy (USA) Website: www.netl.doe.gov/technologies/oil-gas/software
IDEAIt is one of the most comprehensive AI&DM-based suite of software applications for the E&P industry. IDEA is ISI’s software application for the development of general data driven, intelligent models. Other modules available from ISI are IMAGINE, IMPACT, IMPROVE, IMPULSE, IMPRESS, listed in this booklet.
Vendor: Intelligent Solutions Inc. (ISI) Website:www.intelligentsolutionsinc.com
JACTA & ALEAReservoir risk assessment software that integrates all of the reservoir knowledge and uncertainties to help the user build thousands of valid models for a complete risk analysis. In a unique workflow, the software combines geometry, facies, rock, and fluid uncertainties to analyze reservoir volumes distribution and rank uncertainty parameters. Jacta improves upon Monte-Carlo based techniques by honoring and highlighting the correlations between the different uncertainties. Alea is a tool dedicated to helping users quickly analyze the potential values of reservoir prospects. Alea captures and integrates 3D structural uncertainty to provide simple volumetric uncertainties.
Vendor: Paradigm Website: www.pdgm.com
Software Used in the Oil & Gas Industry
29Jorge Salgado Gomes
NeuralToolsAllows the user to create neural networks within Excel. The idea behind neural nets is that they imitate brain functions in looking for patterns in existing data sets – and once they’re trained on historic data, they can take new data and make intelligent predictions about the outcome.Vendor: Palisade Website: www.palisade.com
Neuro3It is a Neural Network Software, constructed to use some organizational principles resembling those of the human brain. They are information-processing systems that demonstrate the ability to learn, recall, and generalize from training patterns or data. They are good at tasks such as pattern matching and classification, data clustering, and forecasting. Common oil and gas applications include forecasting of reservoir properties from wireline log signatures, extension of reservoir properties for simulation, and seismic interpretation. While this application was written for the oil and gas community, it is generic enough to apply to any problem for data-mining, correlation, or categorization needs.Provider: The Department of Energy (USA) Website: www.netl.doe.gov/technologies/oil-gas/software
NNLAPIt is PST’s Neural Network Log Analysis Program. It applies advanced neural network technology to generate synthetic, validated wireline logs, core properties, and production data based on commonly available data. Vendor: Petroleum Software Technologies Website: www.pstware.com
TechlogTechlog Interactive Suite 2011 integrates petrophysics (core and log), geosciences and engineering data, in a versatile manner using cross-domain workflows based on a data management layer. It is probably one of the most suitable log analysis software with powerful utilities for reservoir rock typing. Initially developed by Techsia, the software is now part of the Schlumberger portfolio.Vendor: Schlumberger Website: www.slb.com/services/software
Software Used in the Oil & Gas Industry
30 Jorge Salgado Gomes
EarthModel® FTIt is evolutionary geological modeling software that automatically tracks user steps in building a model so that new information can be added and the model rebuilt in a fraction of the usual time. EarthModel FT also features the RockScale module, which facilitates accurate transfer of rock properties from the seismic grid to the modeling grid, making the integration of seismic properties into the reservoir model a practical reality.
Vendor: Fugro-Jason Website: www.fugro-jason.com
EarthVisionThe software is used for 3D model building, analysis, and visualization, with precise 3D models that can be quickly created and updated. Accurate maps and cross sections, reservoir characterization, and volumetric analysis are made easy. EarthVision′s multitude of visualization tools, including integrated seismic and cellular display, improve and simplify quality control, well planning, and communication to management, investors, partners, and the diverse members of the asset team.
Vendor: Dynamic Graphics Inc Website: www.dgi.com
EmergePredicts reservoir properties using seismic attributes and well log data. The seismic attributes can either be internally or externally derived, and the target can be any measured or calculated log such as porosity, density or water saturation. Typical external seismic attributes are inversion results from STRATA or AVO attribute volumes.
Vendor: CGGVeritas Website: www.cggveritas.com
Geological Modelling7
Software Used in the Oil & Gas Industry
31Jorge Salgado Gomes
FracaFlowThe vendor claims that it is the only package on the market to provide all the necessary tools to assess fractured reservoirs, from the largest characterization tools range to secondary porosity and permeability computation. It enables geologists and reservoir engineers to fully understand the impact of fractures and their associated uncertainties.
Vendor: Beicip-Franlab Website: www.beicip.com
FRAC-EXPLOREIt analyzes the characteristics and patterns of subsurface lineaments, fractures, and other geological features for the purpose of identifying the locations of potential subsurface oil and gas reservoirs. Developed at National Institute for Petroleum and Energy Research (NIPER) by BDM-Oklahoma, Inc. Min Req.:
Provider: The Department of Energy (USA) Website: www.netl.doe.gov/technologies/oil-gas/software
FracMan Reservoir Edition (FRED)FRED allows users to perform detailed spatial and network analysis of discrete-fracture network (DFN) and well fracture data. The software can be used to calibrate reservoir models to well-test data and to existing production data, including mud-loss results and single- or multi-well pump tests. FRED uses a fully-integrated finite-element multi-phase flow solver to simulate steady-state and transient flow through three-dimensional rock masses with discrete fracture networks.
Vendor: Golder Associates Website: www.fracturedreservoirs.com
GeoFrac 2000 It is a terrain generation application with a range of capabilities, which is able to export Terragen terrain files. It has a sophisticated film- and broadcast-quality renderer and procedural modelling tools designed so that you can create the most realistic images possible without taking a photograph. Nor is it a general-purpose 3D program
Software Used in the Oil & Gas Industry
32 Jorge Salgado Gomes
designed to render everything.
Website: http://download.freenet.de/GeoFrac-2000-Windows--4780.xhtml
GeocapProvides a highly flexible environment for visualization and manipulation of geodata. The software is tailored for work with geologic and geographical data. Geocap lets you perform batch jobs and advanced 3D Geo-presentations, including flight tours, by grouping Command Objects into an ordered list which then can be executed in one go. The Geocap Oil & Gas package is used by geologists, geophysicists and reservoir engineers, either as a primary system or as a supplementary tool. By using Geocap one has a great source of functionality and can achieve very high productivity and efficiency in practical work. Geocap Seafloor lets the user process survey data from multibeam echo sounders and creates large high resolution grids. The strict project organization simplifies the way to build effective product lines. Geocap Shelf is a full 3D toolbox including everything needed for continental shelf delineation in accordance with United Nations Convention on the Law of the Sea, Article 76
Vendor: Geocap Website: www.geocap.no
gOcadNext generation 3D geological modeling software, particularly robust in handling complex geometries. Gocad is an application that provides an integrated solution to structural, velocity, stratigraphic and reservoir modeling.
Vendor: Earth Decision Sciences Website: www.earthdecision.com
GSLIBCollection of geostatistical programs developed at Stanford University over the last 15 years. Source code and executables available for download.
Institution: Stanford Center for Reservoir Forecasting Website: http://scrf.stanford.edu/resources.software.gslib
Software Used in the Oil & Gas Industry
33Jorge Salgado Gomes
IRAP-RMSRMS is a geological modeling tool that includes mapping, modelling, planning and workflow management tools. Key modelling features include a new user-friendly interface, which dramatically shortens the learning curve and increases personal productivity; structural modelling tools that build the structural framework within weeks rather than months; high quality grids for geo-modelling and simulation; and advanced property modelling tools providing accurate volume calculations.
Vendor: Roxar Software Solutions Website: http://www.roxar.com/software/
JACTA & ALEAReservoir risk assessment software that integrates all of the reservoir knowledge and uncertainties to help the user build thousands of valid models for a complete risk analysis. In a unique workflow, the software combines geometry, facies, rock, and fluid uncertainties to analyze reservoir volumes distribution and rank uncertainty parameters. Jacta improves upon Monte-Carlo based techniques by honoring and highlighting the correlations between the different uncertainties. Alea is a tool dedicated to helping users quickly analyze the potential values of reservoir prospects. Alea captures and integrates 3D structural uncertainty to provide simple volumetric uncertainties.
Vendor: Paradigm Website: www.pdgm.com
JewelSuiteIt is a windows-based software that integrates seismic, geological, flow simulation, and geomechanical models in a single workflow: 4 models in 1. JewelSuite™ is based on a patented JOA® 3D grid technology which allows modeling of very complex geology as well as seamless integration between static and dynamic modeling.
Vendor: Baker Hughes Website: www.bakerhughes.com
Paradigm “Rock & Fluid Canvas”Solution suite to cover the whole workflow from seismic and petrophysical processing through interpretation,
Software Used in the Oil & Gas Industry
34 Jorge Salgado Gomes
model building and characterization to a fully engineered drilling plan.
Vendor: Paradigm Website: www.pdgm.com
PETRELA very popular and robust integrated geoscience modeling software. It is easy to integrate seismic, logs and geological information to build a 3D model of the reservoir. Using Ocean, Petrel Plug-ins can be developed by the users to integrate their own computer codes in the workflow.
Vendor: Schlumberger Website: www.slb.com
REFRACTIt allows the users to predict fractures away from the wellbore, utilizing and incorporating the valuable information available from a multitude of pre-stack and post-stack seismic attributes. Unlike the DFN approach, REFRACT uses the patented Continuous Fracture Modeling (CFM) approach. The DFN methodology cannot predict fractures away from the wells, and uses the upscaling of randomly distributed discrete fracture planes to generate a “noisy” permeability tensor. Instead, the CFM approach in REFRACT uses a geocellular grid, where seismic and geologic properties are used, along with fracture indicators at the wells, to estimate the distribution of fractures and their effect on permeability and fluid flow.
Vendor: Prism Seismic Website: www.prismseismic.com
SGeMSIt is an open-source geostatistical modeling software, developed by Stanford University, for solving problems involving spatially related variables. It provides geostatistics practitioners with a user-friendly interface, similar to Petrel, an interactive 3-D visualization, and a wide selection of algorithms.
Developer: Stanford University (public software) Website: http://sgems.sourceforge.net/
Software Used in the Oil & Gas Industry
35Jorge Salgado Gomes
SKUAA new software solution containing integrated workflow between seismic and geologic interpretation and modeling. The 2009 release also introduces stratigraphic interpretation modeling, based on SKUA technology, which provides unique tools to concurrently perform stratigraphic interpretation, geochronological modeling and to perform 3D seismic paleo-restoration to restore depositional continuity.
Vendor: Paradigm (part of GoCad) Website: www.pdgm.com
StatMod™This software combines classic geostatistics with innovative Jason Geoscience Workbench® (JGW) seismic inversion methods in a program that is valuable in both exploration and reservoir development. StatMod uses geostatistics to identify models that are consistent with well log information and simultaneously inverts the data to find the subset of those models that are also consistent with the seismic data. This results in models that match all the input data in a single algorithm.
Vendor: Fugro-Jason Website: www.fugro-jason.com
StatMod MCThis software simultaneously inverts for impedance and discrete property types, or lithofacies, instead of taking a two-step approach as is done by conventional inversion and geomodeling algorithms. Not only does simulating lithofacies and impedance realizations in one sweep save time as opposed to doing so sequentially, it also enhances the accuracy of the results as significant synergies between the two can be leveraged during the inversion. Once such highly detailed models of impedance and lithofacies have been generated, any number of additional petrophysical properties (e.g. porosity) can be jointly cosimulated.
Vendor: Fugro-Jason Website: www.fugro-jason.com
Software Used in the Oil & Gas Industry
36 Jorge Salgado Gomes
StatToolsReplaces Excel’s statistics functions with it’s own more robust and accurate functions and enables the user to perform time-series forecasting and statistical analysis.
Vendor: Palisade Website: www.palisade.com
WinGSLIBWinGslib is a toolbox of geostatistical software algorithms written for Windows 9598//NT. It provides a front-end to all the GSLIB programs.
Vendor: Statios Website: www.statios.com
2DMove2D structural modelling in a 3D world for map and linked section construction, balancing, kinematic restoration, validation and structural analysis.
Vendor: Midland Valley Website: www.mve.com
3DMove3DMove is currently the world’s leading 3D software tool for structural restoration, validation and analysis. It uses the principles of structural geology to help build models where little data exists and to use the geological evolution of the model to define parameters for further analysis.
Vendor: Midland Valley Website: www.mve.com
4DFracIt is a module of 4DMove providing automated 3D Discrete Fracture Network (DFN) modelling with direct output for reservoir simulation. This workflow driven approach allows rapid scenario testing and the development of multiple models for sensitivity testing in the reservoir model. 4DFrac complements the Move toolkit with full integration with structural analysis and modelling providing a unique capability to build and test geologically valid fracture systems as well as using an advanced statistical
Software Used in the Oil & Gas Industry
37Jorge Salgado Gomes
approach.
Vendor: Midland Valley Website: www.mve.com
4DMoveAdvanced 3D structural modelling with scenario modelling capability and access to pre-defined modelling workflows including geomechanical restoration (4DRestore), fracture modelling (4DFrac) and turbidite flow modelling (4DSediment).
Vendor: Midland Valley Website: www.mve.com
4DSedimentIt is a module of 4DMove providing an automated 3D turbidity current modelling workflow for simulating turbidite flows onto a paleobathimetry and outputting turbidite distribution and reservoir quality attributes.
Vendor: Midland Valley Website: www.mve.com
Software Used in the Oil & Gas Industry
38 Jorge Salgado Gomes
ABAQUSUse finite element analysis to study and design advanced tests performed on geomaterials; analysis of geomechanical processes in the near-wellbore region, e.g. rock-tool interaction; analysis of geomechanical processes at reservoir scale.
Vendor: Sintef Petroleum Research Website: www.sintef.com
Baker Hughes ToolsIt comprises 6 tools for geomechanics called SFIB, WellCheck, PressCheck, Imager and Caliper. The description of these tools are as follows: SFIB™: determines in-situ stress and evaluates wellbore stability
WellCheck™: optimizes casing seat depths and defines safe mud windows PressCheck™: defines mud window by estimating pore pressure and fracture gradient Imager™: improves wellbore image analysis Caliper™: rapidly determines orientation and extent of wellbore breakouts MohrFracs™: predicts optimum drilling trajectories in fractured reservoirs. Note: See description of GMI below
Vendor: Baker Hughes Website: www.bakerhughes.com
DrillWorksGeomechanical modeling, pore pressure prediction, wellbore stability analysis, rock strength modeling
Vendor: Landmark Graphics Website: http://www.halliburton.com
FLAC and FLAC3D FLAC (2D solutions) and FLAC (3D or quasi-2D solutions) are continuum mechanics codes that provide an explicit
Geomechanical Modelling8
Software Used in the Oil & Gas Industry
39Jorge Salgado Gomes
solution scheme to solve the full equations of motion.
Vendor: Itasca Houston, Inc. Website: www.itascahouston.com
GMI PressCheck/WellCheck/SFIB/ImagerGeomechanical modeling; wellbore stability, pore pressure prediction, sand production prediction, fractured reservoir analysis, fault seal analysis and wellbore imaging. This software was initially developed by Geomechanics International, Inc, but after the acquisition by Baker Hughes, it is now marketed by Baker Hughes.
Vendor: Baker Hughes Website: www.bakerhughes.com
IGEOSS Geomechanical modeling software; solve structure-related issues using thorough geomechanics. 2D and 3D model building (reading data, building sealed models, creating model mesh); 2D and 3D numerical simulation based on continuum mechanics (FEM and BEM); Graphic user interface using TrollTech Technology (Qt); 2D and 3D scientific visualization (OpenGL); Other software modules: Poly3D, Dynel2D, Dynel 3D.
Vendor: Geomechanical Software and Consulting; Acquired by Schlumberger (May 2010) Website: www.slb.com/services/software/geo
PetroModeStructural restoration and petroleum system. It includes back-stripping and structural restoration for reconstruction of the basin to reveal the structural and petroleum system development.
Vendor: Schlumberger based in Aachen/Germany) Website: www.slb.com
PFC2D and PFC3D PFC simulates the mechanical behavior of a material by representing it as an assembly of circular particles (PFC2D) or spheres (PFC3D) that can be bonded to one another.
Vendor: Itasca Houston, Inc. Website: www.itascahouston.com
Software Used in the Oil & Gas Industry
40 Jorge Salgado Gomes
StabView/RocksBankGeomechanical modeling, wellbore stability, sand production prediction, hydraulic fracturing, lost circulation modeling, fault seal analysis, chemical wellbore instability analysis, temperature effect, reservoir depletion and compaction analysis/rock properties determination
Vendor: Weatherford Geomechanics Services (WGS) Website: http://www.advgeotech.com/WGS/index.htm
UDEC and 3DEC The Itasca codes UDEC (2D solutions) and 3DEC (3D and quasi-2D) are powerful numerical programs that use the distinct element method to model problems that are characterized by blocks and discontinuities (joints/faults for instance). Itasca software tools address: Explicit fracture growth simulation; Fully-coupled model; Fluid flow allowed between blocks; various constitutive behaviors and properties of rocks allowed; complicated geometries etc.
Vendor: Itasca Houston, Inc. Website: www.itascahouston.com
VISAGE It is a reservoir-scale geomechanics modeling and simulation system with applications in reservoir engineering, production, heavy oil, CO2, underground gas storage, and water services. VISAGE 2009.1 can be coupled with ECLIPSE Blackoil so that rock stresses and reservoir properties can be modeled together.
Vendor: Schlumberger Website: www.slb.com
1D MEM1D Mechanical Earth Model; includes geomechanical modeling along wellbore; wellbore stability, pore pressure prediction, sand production prediction, fault seal analysis and wellbore imaging. StoneFish (now also toolkit in PETREL); BorStress (Geoframe); Caliban (Geoframe).
Vendor: Schlumberger Website: www.slb.com
Software Used in the Oil & Gas Industry
41Jorge Salgado Gomes
3D & 4D MEMInclude 3D state of stresses; 3D reservoir geomechanical modeling with its boundary conditions (overburden, side-burdens & under-burden); wellbore stability, pore pressure prediction, well placement, fractures reactivation prediction, fault seal analysis, completion design (perforation and fractures initiation (hydrofrac), 2 ways coupling with production and history matching (with ECLIPSE), strain maps over reservoirs after depletion and injection, EOR and permeability update Note: VISAGE (compatible with PETREL & ECLIPSE, therefore represents the link between static and dynamic modeling).
Vendor: Schlumberger Website: www.slb.com
Software Used in the Oil & Gas Industry
42 Jorge Salgado Gomes
ATHOS (replaced by PumaFlow)It is a multipurpose simulator, providing a lot of different physical options from the most routinely used (black-oil, multi-component) to the more specialized ones (thermal, dual permeability, dual porosity, polymers, steam injection). It is the first parallel reservoir simulator available on platforms based on Itanium 2 processors and running on Linux 64 bits based on a standard RedHat Linux distribution. Athos 4.3, the latest commercial release, includes new advanced numerical schemes dedicated to simulate megacell compositional models, a new multi-level well grouping hierarchy, an open coupling solution between surface network third-party software running on heterogeneous hard parallel Athos and an advanced modelling of thermal recovery processes in fractured reservoirs. All these features have been optimised for parallel architectures.
Vendor: IFP Website: www.beicip.com
Baker’s SimBest II, Comp5 & THERM simulatorsReservoir simulations (black oil, composition and thermal)
Vendor: Baker Hughes Website: www.bakerhughes.com
CondorFlowThis software, developed as part of a Joint Industrial Project conducted by IFP and Beicip-Franlab, it offers a solution to help production department speed up the history matching procedure and improve the quality of the production forecasts.
Vendor: IFP Website: www.beicip.com
ECLIPSEWidely used reservoir simulation software; it is available
Reservoir Simulation9
Software Used in the Oil & Gas Industry
43Jorge Salgado Gomes
for black oil models (Eclipse 100) and compositional models (Eclipse 300).
Vendor: Schlumberger Website: www.slb.com
ENABLEENABLE™ works as an integral part of the reservoir simulation workflow to considerably enhance the information obtained about the reservoir during the simulation & history matching process, as well as substantially speeding up the process itself. This allows better and more confident decisions to be made about reservoir investment.
Vendor: Roxar Software Solutions Website: www.roxarsoftwareportal.com
FEFLOWIt is a 3D Hydrogeological modeling software, capable of solving a variety of non-linear groundwater flow and transport problems, including various representations of unsaturated groundwater flow and transport, coupled thermal-hydro-chemical (THC) models. FEFLOW is able to represent arbitrary chemical reactions amongst transported contaminants, including radioactive decay chains and solid-phase and liquid-phase interactions and includes adaptive meshing algorithms.
Vendor: Quintessa Website: www.quintessa.org/software
FloGridECLIPSE FloGrid reservoir modeling software enables high-value workflows to be completed rapidly. It offers a unique and powerful combination of reservoir engineering and geological modeling tools to address complex cross-discipline reservoir characterization challenges and solve problems associated with accurate forecasting of production rates.
Vendor: Schlumberger Website: www.slb.com/services/software/reseng/eclipse_options
Software Used in the Oil & Gas Industry
44 Jorge Salgado Gomes
FracaFlowThe vendor claims that it is the only package on the market to provide all the necessary tools to assess fractured reservoirs, from the largest characterization tools range to secondary porosity and permeability computation. It enables geologists and reservoir engineers to fully understand the impact of fractures and their associated uncertainties.
Vendor: Beicip-Franlab Website: www.beicip.com
FrontsimFrontSim streamline reservoir simulation software is a three-phase, 3D simulator that models multiphase flow of fluids along streamlines. Rank and screen reservoir models in a dynamic environment by combining industry-standard streamline technology with intuitive and interactive 3D modeling. The FrontSim simulator enables the user to construct enhanced reservoir models quickly, paving the way for more accurate production forecasting and better decisions.
Vendor: Schlumberger Website: www.slb.com
GEMReservoir simulation for compositional models
Vendor: Computer Modelling Group (CMG) Website: www.cmgroup.com
IMEXReservoir simulation for black oil
Vendor: Computer Modelling Group (CMG) Website: www.cmgroup.com
IMpactIMpact is ISI>s software application for developing Surrogate Reservoir Models (SRM). Surrogate Reservoir Models (SRM) are accurate replicas of full field numerical reservoir simulation models that run in real-time. SRMs can reproduce well responses throughout the field as
Software Used in the Oil & Gas Industry
45Jorge Salgado Gomes
well as pressure and saturation changes at each time step at the grid block level, all in real-time. SRM are ISI>s implementation of Artificial Intelligence and Data Mining in the reservoir simulation and modeling.
Vendor: Intelligent Solutions, Inc. Website: www.IntelligentSolutionsInc.com
INTERSECTIt is the next generation of simulation software, developed jointly by Chevron and Schlumbeger. Intersect can run large, heterogeneous models - simulating tens of millions of cells - very quickly, going far beyond the capabilities on offer from the current generation of simulators. It also accurately models complex geology and wells, honoring detailed reservoir characterizations with minimal or no up-scaling.
Supporting sophisticated field management, it handles thousands of wells in mature fields, as well as simulating all fluid types and recovery processes in a single simulator. Advanced production controls also enable flexible operational field management.
Vendor: Schlumberger Website: www.slb.com
LYNEXIt has powerful pre- and post- processing capabilities along with unique simulation input and output data analysis technologies. Some of these technologies, such as HM “mismatch” maps, comparison of multiple HM cases, polygon picking to create well groups, rigorous utilization of RFT and PLT data, and the unique MatchingPro technology provide a powerful guide to assist the engineer in closing the history match gap.
Vendor: Nitec LLC Website: http://www.nitecllc.com/products.html
MEPOSoftware designed to assist history match; Uses experimental design (e.g. Latin hypercube sampling) to select the least number of input parameters required to achieve the match.
Software Used in the Oil & Gas Industry
46 Jorge Salgado Gomes
It links with VIP, CMG, MORES, Eclipse, Frontsim. Provides a range of different optimization mechanisms including genetic algorithms and evolutionary strategy. It generates multiple matched models and uses them to give an estimate of uncertainty in future production predictions.
Vendor: SPT Group Website: www.sptgroup.com
NAPSACA high performance finite-element software package for modelling groundwater flow and transport through fractured media.
Vendor: Napsac Website: www.napsac.co.uk
NEXUSReservoir simulation software, tightly coupled, fully implicit surface-subsurface Modeling, whereby the surface facilities can be integrated into the total asset model.
Vendor: Halliburton Website: www.halliburton.com
PowerGridGridding and upscaling software
Vendor: Halliburton Website: www.halliburton.com
PumaFlowA new generation reservoir simulator featuring rigorous physical formulations, high performance computing, brand-new user-oriented interface and work environment. It supports black oil, compositional, fracture modeling and also thermal. The simulator exploits the benefit of cluster technology (open MP or MPI parallel computing).
Vendor: Beicip-Franlab Website: www.beicip.com
ResAssist™ It is an easy-to-use PC based graphical user interface (GUI)
Software Used in the Oil & Gas Industry
47Jorge Salgado Gomes
developed by Epic Consulting Services that allows the user to interact with StreamSim’s powerful 3DSL® streamline simulator module in the familiar Windows™ environment thus eliminating the need to execute keyword commands normally required to run 3DSL.
Vendor: Baker Hughes Website: www.bakerhughes.com
RESOLVEIt has been developed as a master controller to communicate and control the link between Reservoir Simulators, Process Simulators, other third party software, as well as client proprietary tools and the IPM suite of tools, developed by Petroleum Experts (Petex).
Vendor: Petroleum Experts (Petex) Website: www.petex.com
STARSReservoir simulation for advanced EOR
Vendor: Computer Modelling Group (CMG) Website: www.cmgroup.com
SUREReservoir simulator; the first simulator in the market to use PEBI grids. The new version of SURE reservoir flow simulation has achieved blistering performance using graphics cards for number crunching. The technology is set to outpace Moore’s Law by orders of magnitude.
Vendor: SMT Website: www.seismicmicro.com
TempestThis software provides an extensive, feature-rich solution for full-field reservoir simulation which is accessible for the entire subsurface community rather than only a few, highly specialist reservoir engineers. Extensive parallel processing capabilities allow users to conduct ever faster simulation runs in higher levels of detail. The greater accuracy this generates in predictions of field performances enables better targeted capital expenditure.. The main software
Software Used in the Oil & Gas Industry
48 Jorge Salgado Gomes
modules are Tempest-MORE and Tempest-PVTx.
Vendor: Roxar Software Solutions Website: www.roxarsoftwareportal.com
TOUGH2It is a general-purpose fluid and heat flow simulator, with applications in geothermal reservoir engineering, nuclear waste disposal, environmental contamination problems. The module ECO2N is used for CO2 sequestration in saline aquifers. This module is available from the Energy Science and Technology Software Center (ESTSC).
Developer: Earth Sciences Division, Lawrence Berkeley National Laboratory, USA Website: http://esd.lbl.gov/tough2/index.html
VIPWidely used reservoir simulation software.
Vendor: Halliburton Website: www.halliburton.com
WinPropA comprehensive equation of state engineering tool, determines the reservoir characteristics and compositional variations of fluids for use with CMG>s reservoir simulators
Vendor: Computer Modelling Group (CMG) Website: www.cmgroup.com
3DSL FrontsimSimulation tool based on streamlines.
Vendor: Schlumberger Website: www.slb.com
Software Used in the Oil & Gas Industry
49Jorge Salgado Gomes
F.A.S.T WellTest and (F.A.S.T VirtuWell & F.A.S.T PVTplus)Software to simulate the reservoir flow behavior based on estimated reservoir parameters. The appropriate flow rates, flow duration and shut-in duration are determined to confirm the reservoir parameters within a reasonable time frame. The F.A.S.T. VirtuWell™ and F.A.S.T. PVTplus™ software address operational concerns to ensure the wellbore is configured appropriately and that the necessary test equipment is in place.
Vendor: Fekete Website: www.fekete.com
Interpret 2000Industry>s most powerful transient well test analysis and design solution now in a new re-designed interface.
Vendor: Baker Hughes Website: www.bakerhughes.com
PanMeshSoftware makes numerical simulation accessible to the well test analyst without requiring simulation expertise. It can be used to simulate bottomhole flowing pressures for history matching to a well test data set, or to design a well test. It uses numerical simulation which envelopes all existing analytical solutions and has potentially unlimited flexibility including three-dimensional models.
Vendor: Weatherford International Website: www.ep-solutions.com
PanSystemIt has been the industry’s leading well test analysis program for more than 20 years. It is a robust yet easy-to-use software tool that provides multiple options for models and analysis. It provides a unique ability to obtain information
Well Testing10
Software Used in the Oil & Gas Industry
50 Jorge Salgado Gomes
from within the reservoir surrounding the well. With appropriate testing techniques well testing can provide a wealth of information including permeability, completion efficiency, well performance, production forecasts and reservoir structure and pressure.
Vendor: Weatherford International Website: www.ep-solutions.com
REVEALIt is designed to study specialised near well bore effects and access their impact on the production from the reservoir. Most reservoir groups within the oil and gas companies are carrying out specialist studies in areas such as thermal and mobility studies – injectivity and production, production chemistry, scaling, solids and sanding, thermal and hydraulic fracturing, steam injection etc. These studies are often being carried out isolated from the reservoir simulation model. The key role for REVEAL is allow these specialist studies to be integrated with the reservoir simulation models - Eclipse, VIP, etc. - to evaluate the impact on production. REVEAL enables the corporate reservoir simulation model to be used and the effects of these specialist studies to be integrated.
Vendor: Petroleum Experts (Petex) Website: www.petex.com
SaphireWell test analysis program with enhanced features, in particular for handling horizontal well data.
Vendor: Kappa Engineering Website: www.kappaeng.com
Software Used in the Oil & Gas Industry
51Jorge Salgado Gomes
AvocetProvide solutions from data management to production optimization. Solutions are scalable, integrated, and tailored to meet the producing-asset objectives and to relatively deliver what the engineer needs.
Vendor: Schlumberger Website: www.slb.com/services/software
CoViz 4DLeads the industry in providing a dynamic visual environment for reservoir management. Understanding the changing response of a reservoir over time is critical for optimizing production and development decisions. CoViz 4D makes it possible for multi-disciplinary users to simultaneously view and interrogate datasets from throughout the asset development team—regardless of the original data source. Understanding through data fusion—powerful in 3D—increases enormously when used in 4D: the unique temporal functionality in CoViz 4D allows you to visualize how development decisions affect your reservoir.
Vendor: Dynamic Graphics Inc Website: www.dgi.com
EnSys YocumEnSys Yocum offers a powerful suite of field proven, accurate multiphase software for oil and gas production systems design, performance improvement and flow measurement.
Vendor: EnSys Yocum, Inc Website: www.ensyenergy.com
F.A.S.T cbmCoalbed methane reservoir analysis; estimate reserves and generate forecast for new plays. Analyse production and pressure data for producing reservoirs.
Vendor: Fekete Website: www.fekete.com
Reservoir Management11
Software Used in the Oil & Gas Industry
52 Jorge Salgado Gomes
F.A.S.T evolutionTight & shale development planning; it evaluates optimum well spacing, scheduling and completion type quickly and efficiently using a combination of analytical reservoir modeling and simple economics.
Vendor: Fekete Website: www.fekete.com
F.A.S.T harmonyProduction data analysis and reserves evaluation toolkit. Analyze well and group production and pressure data with traditional decline, gas material balance, volumetrics and more in one seamless integrated engineering toolkit.
Vendor: Fekete Website: www.fekete.com
F.A.S.T rtaProduction decline analysis. Calculate reserves and hydrocarbons-in-place from production data using traditional and advanced methods.
Vendor: Fekete Website: www.fekete.com
Fekete ToolkitProduction data analysis & reserves evaluation
Vendor: Fekete Website: www.fekete.com
FloQuestSoftware for wellbore flow modeling and in-well data management. Used for the visualisation and interpretation of distributed temperature (DTS) and other downhole sensors. This allows for the easy access and better utilization of production data, to ensure maximum return on monitoring investments.
Vendor: Floquest Website: www.floquest.com
Software Used in the Oil & Gas Industry
53Jorge Salgado Gomes
FORGASIt is gas field deliverability forecasting and development scheduling system. This software allows the user to simulate depletion of reservoirs, gas inflow in to wellbore, multiphase flow in tubing, oil and gas production and work on the design of gas storage projects.
Vendor: Technotrade Website: www.technotrade.com.pk
IMagineIMagine is ISI>s software product for fast track reservoir management. IMagine is based on ISI>s Top-Down, Intelligent Reservoir Modeling (TDM) technology. Top-Down Modeling is a completely data driven reservoir modeling and reservoir management technology that has been successfully tested for accuracy against numerical reservoir simulation, giant oilfields of the Middle East and unconventional Shale resources of North America. TDM is ISI>s implementation of Artificial Intelligence and Data Mining for the fast track reservoir management.
Vendor: Intelligent Solutions, Inc. Website: www.IntelligentSolutionsInc.com
Kappa products such as (Ecrin, Topaze, Rubis)Well performance analysis
Vendor: Kappa Engineering Website: www.kappaeng.com
LOWISIt provides a unique combination of real-time surveillance, analysis and well service management tools, empowering producers to better organize and standardize their production workflow processes. Using the software, operators can quickly identify, prioritize, plan and service poor performing wells, thereby reducing downtime and the associated production losses. LOWIS Analysis Workbench™ software promotes faster diagnosis and remediation of production problems for artificially lifted and flowing wells. With this program, you can analyze and optimize your wells using real-time information enabling
Software Used in the Oil & Gas Industry
54 Jorge Salgado Gomes
you to zero in on probable performance problems before well intervention.
Vendor: Weatherford International Website: www.ep-solutions.com
MBALThis is a material balance software which helps the engineer better define reservoir drive mechanisms and hydrocarbon volumes. This is a prerequisite for reliable simulation studies. MBAL is commonly used for modelling the dynamic reservoir effects prior to building a numerical simulator model.
Vendor: Petroleum Experts (Petex) Website: www.petex.com
MatBalsoftware designed for reservoir analysis and reservoir centered production forecasting based on a material balance approach. For engineering applications, it provides a quick and easy alternative to a full reservoir simulation study. Additionally, the program provides a way of understanding the size of reserves and subsurface connectivity between reservoirs and aquifer to assess the commercial viability of a new development.
Vendor: Weatherford International Website: www.ep-solutions.com
Reo ForecastIt is a software to forecast field production rates, ranging from simple exponential decline curves to finite difference reservoir simulation models by considering the detailed interactions of the reservoir, wellbore, and surface equipment.
Vendor: Weatherford International Website: www.ep-solutions.com
ResBalanceAnalyzes oil and gas material balance without missing a detail; rapid hypothetical scenario building allows for speedy, reliable decisions; analyzes details using Havlena or Odeh plots, diagnostic plots, or pressure
Software Used in the Oil & Gas Industry
55Jorge Salgado Gomes
profiles and PVT data
Vendor: Baker Hughes Website: www.bakerhughes.com
ResSurveilApplication: Mines your petroleum engineering information to understand and optimize production; manage, manipulate, and view your data efficiently; evaluates well, pattern, or field performance to make the right decision every time
Vendor: Baker Hughes Website: www.bakerhughes.com
ResWorksEvaluate well-performance with the complete evaluation toolkit that saves time; improve asset profitability with informed decisions.
Vendor: Baker Hughes Website: www.bakerhughes.com
VOLTSFor the assessment of resources and reserves.
Vendor: Schlumberger Website: www.slb.com
Software Used in the Oil & Gas Industry
56 Jorge Salgado Gomes
ATHOS (replaced by PumaFlow)Used to carry out numerical simulations in core floods. See also description on section 9 above.
Propriety: beicip-Franlab/IFP Website: www.beicip.com
CO2 ProphetIt is a water and CO2 flood prediction software. CO2 Prophet, conceived by Texaco Exploration and Production Technology Department (EPTD), was partially developed as part of the DOE Class I cost share program «Post Waterflood, CO2 Flood in a Light Oil, Fluvial Dominated Deltaic Reservoir» under DOE Contract No. DE-FC22-93BC14960. The DOE does not provide technical support for this application.
Provider: The Department of Energy (USA) Website: www.netl.doe.gov/technologies/oil-gas/software
GPASA new generation chemical flooding simulator
Propriety of Department of Energy of USA Website: www.netl.doe.gov/technologies/oil-gas/software
Rubis-CO2CO2 sequestration in deep saline formations
Vendor: Kappa Engineering Website: www.kappaeng.com
SENDRAUsed for numerical simulation of water-oil and gas-oil core flood tests and design of such experiments. It can also be used for design and numerical simulation of single speed and multi speed centrifuge tests.
Vendor: Weatherford Website: www.ep-solutions.com
EOR & SCAL12
Software Used in the Oil & Gas Industry
57Jorge Salgado Gomes
TECHSIMUsed for compositional simulation involving miscible and/or near miscible gas injection, and including CO2 EOR tests on long composite cores.
Vendor: RPS Group Plc - Energy Website: www.rpsgroup.com/energy
UTCOMPCompositional simulator
Propriety of University of Texas Website: www.utexas.edu
UTCHEMExplicit chemical flooding simulator.
Propriety of University of Texas Website: www.utexas.edu
WorkBench pvt (WBpvt) EOS fluid characterization program for use with compositional simulations and other applications, allows user to match laboratory PVT test data optimally with fewer components.
Vendor: Baker Hughes Website: www.bakerhughes.com
See also other compositional simulators under section 8.
Software Used in the Oil & Gas Industry
58 Jorge Salgado Gomes
AFE Management SystemCapital expenditure workflow, tracking and control system.
Vendor: Halliburton Website: www.halliburton.com
AssetPlannerGenerates field development scenarios automatically, including target generation, path planning, platform requirements and positioning.
Vendor: Halliburton Website: www.halliburton.com
AssetViewProvides a cross-disciplinary, 3-D asset visualization and collaboration viewer for all applications in the DecisionSpace environment.
Vendor: Halliburton Website: www.halliburton.com
CasingSeatA graphics-based tool for accurately determining casing setting depth and viable casing and wellbore schemes.
Vendor: Halliburton Website: www.halliburton.com
DRILLBENCHAdvanced Drilling simulator for drilling operation and its capability include drilling solutions for challenging wells, modeling wells with diverse and extreme complexities & safe and cost-effective operational procedures.
Vendor: Scandpower Petroleum Technology Website: www.sptgroup.com
Drilling & Geosteering
13
Software Used in the Oil & Gas Industry
59Jorge Salgado Gomes
Engineer’s Data Model (EDM)
Application: Integration platform for drilling, well services, production and economics data. The EDM platform supports drilling, completions and production engineering workflows through consistent data management, navigation, security and unit handling.
Vendor: Halliburton Website: www.halliburton.com
Field Scenario PlannerApplication™ Saves every scenario created by AssetPlanner and TracPlanner software and lets you create criteria by which you will compare them.
Vendor: Halliburton Website: www.halliburton.com
GEOLOGGeological software with good flexibility to integrate horizontal wells and carry out well geosteering. See also section 6.
Vendor: Paradigm Website: www.pdgm.com
iWellFileMonitors daily operations information from anywhere, at anytime using Internet connectivity.
Vendor: Halliburton Website: www.halliburton.com
OpenWells SoftwareA comprehensive data collection, reporting and managing well operations, downhole schematics, web-based reporting, data analysis and life-cycle well knowledge management system. The modules present are:
1) Operations Morning Reporting: Easily captures complete operations history and quick analysis of key performance indicators. Supports “lessons learned” for further reducing NPT.
Software Used in the Oil & Gas Industry
60 Jorge Salgado Gomes
2) Data Mining: Cross-domain query capability gives you rapid access to actual or historic offset well data in the Engineer’s Data Model platform.
3) Wellbore Schematics Generates images of wellbore equipment using data from EDM platform via a drag-and-drop interface.
4) Time-Based Data Logs: Reviews of time-based rig equipment and downhole sensor data logs help you collate, configure and display drilling, completions and workover data logs in the context of operations reports.
5) Construction and Reclamation History: Collects the full environmental and operations history of a well site from initial assessment to abandonment and reclamation which helps simplify regulatory compliance.
6) Portal Reporting: Through iWellFile software, creates a well operations Web site that gives users secure, immediate access to ongoing and historical well information, output reports, downhole schematic diagrams and analytical results from select Engineer’s Desktop applications.
Vendor: Halliburton Website: www.halliburton.com
OpenWireProvides real-time access to formation evaluation and drilling data
Vendor: Halliburton Website: www.halliburton.com
OspreyOsprey Operations Manager is a Web-based system that combines business surveillance with drilling performance analysis to manage and optimize drilling, completions, and interventions across assets worldwide.
Vendor: Schlumberger Website: www.slb.com/services/software/drilling
Software Used in the Oil & Gas Industry
61Jorge Salgado Gomes
PrecisionTargetIncorporates geophysical, geological and mechanical risk and uncertainty in target generation.
Vendor: Halliburton Website: www.halliburton.com
PresgrafPore pressure prediction and analysis with expanded log viewing capabilities.
Vendor: Halliburton Website: www.halliburton.com
Resource Scheduler Gantt-based planning tool for resource scheduling and logistics.
Vendor: Halliburton Website: www.halliburton.com
StressCheckEnables optimal casing, liner and tubing string evaluation and design.
Vendor: Halliburton Website: www.halliburton.com
The Engineer’s Desktop suiteConsists of WELLPLAN™, OpenWells® and other core engineering software, including advanced casing and tubular design tools. Landmark’s StressCheck™ and CasingSeat™ software take trial and error out of designing casing, liner and tubing strings, ultimately minimizing their cost.
Vendor: Halliburton Website: www.halliburton.com
TracPlannerEnables well planning in a 3-D environment, and optimizes platform and pad positioning.
Vendor: Halliburton Website: www.halliburton.com
Software Used in the Oil & Gas Industry
62 Jorge Salgado Gomes
WellArchitectDeveloped in conjunction with Baker Hughes, is an advanced well planning and survey management system for integrated planning and drilling of directional wellpaths with or without earth models. Devised to seamlessly accommodate the needs of sidetracking, multi-lateral wellpaths, and re-entry drilling, WellArchitect is used at both the office and wellsite, by all personnel levels in the industry. Trajectory calculations, target erosion by positional uncertainty, reporting, plotting, and 3D visualization are all included in this package.
Vendor: Dynamic Graphics Inc Website: www.dgi.com
WELLCATAnalyzes wellbore temperature and pressure, casing and tubing design (including Vacuum Insulated Tubing), and multi-string annular pressure buildup (APB); predicts well-head movement and steam modeling for high-pressure, high-temperature (HPHT) drilling and production environments.
Vendor: Halliburton Website: www.halliburton.com
Well CostProvides tools for deterministic and probabilistic cost estimation throughout the life of a well.
Vendor: Halliburton Website: www.halliburton.com
Well Path Planning COMPASSDirectional path planning, survey data management, plotting and anti-collision analysis tool.
Vendor: Halliburton Website: www.halliburton.com
Software Used in the Oil & Gas Industry
63Jorge Salgado Gomes
WELLPLAN (suite of tools)
Applications:1) WELLPLAN™ Torque and Drag – Enables wellbore
optimization for hole drag and torque considerations, reducing contact forces, buckling and fatigue.
2) WELLPLAN™ Surge – Models downhole pressure surges caused by pipe movement.
3) WELLPLAN™ Critical Speed Analysis – Predicts and characterizes drill string vibrations.
4) WELLPLAN™ WellControl – Models well kick scenarios; performs the complex calculations required for optimum pumping schedules.
5) WELLPLAN™ BHA DrillAhead – Models BHA behavior, design and selection.
6) WELLPLAN™ OptiCem™ – Analysis tools to design and simulate the optimum cement job.
7) WELLPLAN™ Stuck Pipe – Conducts failure analysis and calculates back-off force, forces delivered to stuck points and forces required to set and fire jars.
8) WELLPLAN™ Hydraulics – Enables equivalent circulating density (ECD) and hole cleaning optimization, as well as pressure loss analysis.
Vendor: Halliburton Website: www.halliburton.com
WellViewIt is a complete well information management system for well planning, drilling, completion, testing and workovers.
Vendor: Peloton Computer Enterprises Website: www.peloton.com
Software Used in the Oil & Gas Industry
64 Jorge Salgado Gomes
BakerHughes MFrac, MinFrac, MView
Applications:MFrac—a comprehensive fracture design and evaluation simulator enables real-time and replay fracture simulation; make successful decisions based on complex what-if scenarios and parametric studies; find the optimal and most cost-effective solution using comprehensive proppant, fluid, acid, tubing, and rock databases
MinFrac—analyze fracture efficiency, pressure, dimension, and leakoff before you design a full-scale fracture treatment; real-time data analysis and replay history matching allows for a complete fracturing-date interpretation
MView—integrate and process real-time data in all the MFrac, MinFrac, and MWell applications; visualize and QC any data before, during, or after a fracturing job.
Vendor: Baker Hughes Website: www.bakerhughes.com
DynaLift & LiftAdvisor These are software products designed for gas lift systems in oil wells. These systems can be complex and sometimes the design is not straightforward to either design systems or diagnose problems. Getting it right is the key to optimizing production from gas lifted wells and fields and these softwares helps the user to get it right.
Vendor: Weatherford International Website: www.ep-solutions.com
@FRAC@FRAC is a 3D fracture modeling program. It is a consolidation of packages to simulate injection for waste disposal and petroleum related uses. The program is a 3D hybrid finite element boundary integral model that treats the fracture tip with singular elements. The software
Petroleum Engineering14
Software Used in the Oil & Gas Industry
65Jorge Salgado Gomes
package incorporates 3D virtual reality visualization with fracture treatment and design performance. This code is currently under development and a commercially available version is not available yet.
Vendor: Advantek International Website: www.advantekinternational.com
FracCADEFracCADE is a hydraulic fracturing code available from Schlumberger as part of CADE Office, an integrated suite of engineering applications for well construction, production and stimulation. The program features pseudo-3D and 2D numerical models that can model propped and acid hydraulic fractures FracCADE has the ability to predict the simultaneous growth of multiple fractures at different intervals as well as design capabilities for pump schedule generation. One of the drawbacks of this program is that it lacks fully 3D geometry simulations.
Vendor: Schlumberger Website: www.schlumberger.com
Frac3DFrac3D is a three-dimensional finite element based fracture analysis program designed to model structural engineering problems. The current version of the program is capable of conducting several structural analyses: (1) regular 3-D stress analysis, (2) 3-D fracture analysis, (3) stress and fracture analysis under “Generalized Plane Strain” conditions and (4) non-linear analysis of solid structures (for small strain plasticity).
Developer: Lehigh University of Bethlehem, PA Website: www.lehigh.edu
FracXpertFracture modeling software applied to frac design by providing total data integration, including pumping rates, fluid efficiencies and treatment volumes. The software averages different logging parameters over selected intervals and outputs data to well log plots, tabular listings and ASCII data files.
Software Used in the Oil & Gas Industry
66 Jorge Salgado Gomes
Vendor: Halliburton Website: www.halliburton.com
GAPIt is a multiphase oil and gas optimiser tool that models the surface gathering network of field production systems. When linked with the well models of PROSPER and reservoir models of MBAL a full field production optimisation and forecast can be achieved. GAP can model production systems containing oil, gas and condensate, in addition to gas or water injection systems. GAP>s powerful non-linear optimisation engine allocates gas for gas lifted wells or sets wellhead chokes for naturally flowing wells to maximise revenue or oil/gas production while honouring constraints at any level in the system.
Vendor: Petroleum Experts (Petex) Website: www.petex.com
GOHFERGOHFER is a 3D planar fracture propagation and slurry transport simulator produced by Core Laboratories. GOHFER (Grid Oriented Hydraulic Fracture Extension Replicator) is a simulator that models proppant transport, acid fractures, multiple fractures, simulates fractures from horizontal and asymmetric wells, and can account for vertical and lateral variations in leakoff. The model is based on a regular grid structure to calculate elastic rock displacement and fluid flow solutions. Simulations are calculated by assigning each grid values for important parameters. Displacement of the fracture face at the nodes is determined by an integration of the pressure distribution over each node.
Vendor: Core Laboratories Website: www.corelab.com
HYFRACP3DIt is a psudo-3D finite element hydraulic fracture geometry simulator that utilizes 2D planar solution. The model predicts the fracture geometry over time for a fracture propagating in a three-layered system of variable lithology. The model employs a finite element solution to numerically solve the
Software Used in the Oil & Gas Industry
67Jorge Salgado Gomes
non-linear partial equations for fracture fluid pressure and induced fracture dimensions. The software lacks proppant transport capabilities, is limited to a three layer system, only allows for pseudo-3D simulations, and does not have a graphics package.
Developer: Ohio State University Res. Foundation Website: www.osu.edu/departments/dept
IMproveIMprove is ISI>s software product for Forecast, Design and optimization of well remedial operations such as Hydraulic Fracturing, Acidizing and other workovers. IMprove also provides means for data driven «Best Practices» analysis of all petroleum engineering related operations. IMprove is ISI>s implementation of Artificial Intelligence and Data Mining for production enhancement.
Vendor: Intelligent Solutions, Inc. Website: www.IntelligentSolutionsInc.com
LedaFlowIt is a stand-alone tool for transient multiphase flow analysis and flow assurance design in engineering studies. In addition, LedaFlow® is built to exploit the power of high-performance computing to support decisions in real-time. It is seamlessly integrated with the K-Spice® dynamic process simulation tool and suite of solutions for digital oil fields and integrated operations.
Vendor: Kongsberg Website: www.kongsberg.com
MFracIt is a software for real-time and replay fracture simulation. It handles three-dimensional fracture geometry and integrated acid fracturing solutions. Fully coupled proppant transport and heat transfer routines, together with a flexible user interface and object oriented development approach, permit use of the program for fracture design, as well as treatment analysis.
Vendor: Meyer & Associates, Inc. Website: www.mfrac.com.
Software Used in the Oil & Gas Industry
68 Jorge Salgado Gomes
OLGAIt is a standard tool for transient simulation of multiphase petroleum production. OLGA is used for networks of wells, flowlines and pipelines and process equipment, covering the production system from bottom hole into the production system. The transient capabilities of OLGA dramatically increase the range of applicability compared with steady state simulators. It is applied for engineering throughout field life from conceptual studies to support of operations. OLGA can dynamically interface with all major dynamic process simulators, such as Hysys, DynSim, UniSim, D-SPICE, INDISS and ASSETT. This allows for making integrated engineering simulators and operator training simulators studying the process from bottom hole all the way through the process facility in a single high fidelity model.
Vendor: Scandpower Petroleum Technology Website: www.sptgroup.com
PC-PumpThis software allows users to perform quality analyses, designs and evaluations for downhole progressing cavity pumping applications.
Vendor: C-FER Technologies Website: www.pc-pump.com
PIPEFLOSteady State multiphase flow simulation software for pipelines. PIPEFLO’s features for sensitivity studies make it fast and easy for users to consider a wide variety of options in order to arrive at the best solutions for their design issues and operational problems. Its major application incudes Flow Assurance, Pipeline Design, Automatic Facility Locator, Advanced Sensitivity Studies, Export to OLGA, Hydrates, Corrosion, Pipeline Optimisation, Pipeline Cool Down Calculation and Pipeline Looping
Vendor: Scandpower Petroleum Technology Website: www.sptgroup.com
Software Used in the Oil & Gas Industry
69Jorge Salgado Gomes
PIPESIMPIPESIM software is a steady-state, multiphase flow simulator for the design and diagnostic analysis of oil and gas production systems. PIPESIM software tools model multiphase flow from the reservoir to the wellhead. PIPESIM software also analyzes flowline and surface facility performance to generate comprehensive production system analysis.With advanced modeling algorithms for nodal analysis, PVT analysis, gas lift, and erosion and corrosion modeling, PIPESIM software helps you optimize your production and injection operations.
Vendor: Schlumberger Website: www.schlumberger.com
PROSPERIt is a well performance, design and optimisation program for modelling most types of well configurations found in the worldwide oil and gas industry today. PROSPER can assist the production or reservoir engineer to predict tubing and pipeline hydraulics and temperatures with accuracy and speed. PROSPER>s sensitivity calculation features enable existing well designs to be optimised and the effects of future changes in system parameters to be assessed.
Vendor: Petroleum Experts (Petex) Website: www.petex.com
ReOSoftware used for production forecasting and field planning that supports engineers and managers making business planning decisions for oil and gas fields. It seamlessly links together models of the reservoir, wellbore and surface equipment to predict their combined performance and detailed interactions. This allows integrated production forecasting and optimization from reservoir to delivery point.
Vendor: Weatherford International Website: www.ep-solutions.com
SimfracSimfrac is a hydraulic fracturing program by TAURUS
Software Used in the Oil & Gas Industry
70 Jorge Salgado Gomes
Reservoir Solutions Ltd. of Calgary, Alberta. The software features a conventional 3D hydraulic fracture simulation, is fully documented and runs under Windows, but does not have a graphical user interface.
Vendor: TAURUS Reservoir Ltd Website: www.taurusrs.com
StimCADEIt is a matrix acidizing software
Vendor: Schlumberger Website: www.schlumberger.com
StimPlanIt is a state-of-the-art 3D hydraulic fracture simulator for complex situations as well as a complete design tool kit. The software package offers fully 3D fracture geometry solutions in layered environments, pseudo-3D numerical fracture modeling, 2D quick simulations, 2D numerical multi-phase flow, and can simulate the simultaneous growth of multiple fractures at different intervals. StimPlan incorporates numerical modeling technology with gridded fracture models to calculate fracture geometry in layered formations. Implicit finite difference calculations are used to solve equations of mass balance, height growth, and fluid flow. Fracture width is simulated through finite element calculations. Fluid flow and proppant transport in the fracture is calculated using 2D numeric multi-phase flow solutions. StimPlan also has the capability of simulating acid fractures and designing pump schedules. It includes a database of properties for fracturing fluids and proppants and offers data handling and analysis capabilities.
Vendor: NSI Technologies Inc. Website: www.nsitech.com
TerraFRACIt is a 3D numerical software package for modeling and solving hydraulic fracturing, waste disposal and cuttings re-injection problems. The software is produced by TerraTek Inc. of Salt Lake City, UT. The program is also capable of solving complicated and non-standard fracturing
Software Used in the Oil & Gas Industry
71Jorge Salgado Gomes
treatments, including fractures in dipping layers with high stress contrast, and proppant or cuttings transport.
Vendor: TerraTek Inc. (service provided by Schlumberger) Website: www.terratek.com
WELLFLOSteady State Multiphase flow simulation software for wells. Its major application includes Nodal Analysis, Underbalanced Drilling, Managed Pressure Drilling, and Operating Envelope for UBD/MPD Design, Artificial Lift Design, Thermal Applications, Down-hole Electric Heating, Flow Assurance, Acid Gas Disposal, Hydrates, and Steam Injection & Production Optimisation
Vendor: Scandpower Petroleum Technology Website: www.sptgroup.com
WellfloIt is a powerful and simple to use stand-alone application to design, model, optimize and troubleshoot naturally flowing or artificially lifted oil and gas wells. Using a guided step-by-step well configuration interface, the engineer builds accurate and rigorous well models. They display the behavior of reservoir inflow, well tubing and surface pipeline flow, for any reservoir fluid. Using WellFlo software results in more effective capital expenditure by enhancing the design of wells and completions, reducing operating expenditure by finding and curing production problems and enhancing revenues by improving well performance
Vendor: Weatherford International Website: www.ep-solutions.com
WellSavvyIt is an artificial lift real-time diagnostic software, offering the ability to identify non-obvious trends in large amounts of data based on prior observations–much like a production optimization expert would do in real life.
Vendor: Weatherford International Website: www.ep-solutions.com
Software Used in the Oil & Gas Industry
72 Jorge Salgado Gomes
WELL SIMSoftware designed for horizontal and multi-lateral well simulation. It handles a large number of stublines and laterals flowing into vertical or inclined wells; 2)- balances pressure flow and converges to specified wellhead or surface line terminus pressure; 3)- blends different reservoir pay GOR, water fraction and other physical properties; 4)- well technology and surface line technology items can be invoked including submerged pumps, GOSPs, gas injection and chokes; 5)- predicts flow regimes, slug sizes and frequency in laterals; 6)- predicts wellbore flow regimes; 7)- predicts sand settling velocities; 8)- predicts cease flow conditions. These may result from low pi, sand and/or drilling mud plugging and sand settling.
Vendor: EnSys Yocum, Inc Website: www.ensyenergy.com
WEMPerforating nodal analysis software
Vendor: Baker Hughes Website: www.bakerhughes.com
Software Used in the Oil & Gas Industry
73Jorge Salgado Gomes
MultiflashMultiflash can perform multiphase equilibrium calculations between any number of phases of different types. Each property of each phase may be described by a different thermodynamic model if required. The phases that can be modeled include gases, liquids and solids. A number of cubic and non-cubic equations of state are available. Determination of thermodynamic and transport properties is possible. Special modules have been defined to study flow assurance problems, such as the formation of gas hydrates, waxes and asphaltenes. The program can be operated through its own graphical interface or through MS Excel.
Vendor: Infochem, Computer Services Ltd Website: http://www.infochemuk.com
MultiScaleIt is a water chemistry and mineral scaling prediction program. After input of water analysis, oil/gas analysis and P/T, the software computes 3-phase equilibrium, phase compositions of oil, gas and water pH, ion concentration etc. It computes scale potential and amount of salt precipitate.
Provided by: EXPRO Group Website: www.exprogroup.com
OLGA2000Software for scales and hydrates prediction, emulsion and crude dehydration, wax/paraffin deposition prediction (including pipeline restart studies), effluent water treatment and corrosion potential prediction.
Vendor: Scandpower Petroleum Technology Website: www.sptgroup.com
PIPESIMSoftware for scales and hydrates prediction, wax/paraffin
Production Chemistry15
Software Used in the Oil & Gas Industry
74 Jorge Salgado Gomes
deposition prediction, and corrosion potential prediction.
Vendor: Schlumberger Website: www.schlumberger.com
PVTPSoftware for hydrates prediction, wax/paraffin deposition prediction
Vendor: Petroleum Experts (PETEX) Website: www.petex.com
PVTflexThis software allows engineers to build fully compositional fluid PVT models. These models form the foundation of all integrated production optimization studies–from individual well to full field optimization. This equation of state (EoS) based application provides far more accurate gas/oil/water phase predictions than the traditional black oil PVT correlations.
Vendor: Weatherford International Website: www.ep-solutions.com
PVTsimSoftware for equation of state, phase behavior, scale and hydrates prediction and wax/paraffin deposition predictions; It is also used for asphaltene precipitation modeling and prediction and effluent water treatment studies.
Vendor: Calsep Website: www.calsep.com
ScaleChemComprehensive tool designed to help simulate and predict oil and gas production flow problems resulting from mineral scale at different pressures and temperatures. The software checks the compatibility of different waters at user specified ratios, in order to find safe ratios (no solids formation) for injection and disposal operations. It also simulates the filtering, mixing and separating of waters in post-processing operations.
Software Used in the Oil & Gas Industry
75Jorge Salgado Gomes
Vendor: Oli Systems, Inc. Website: www.olisystems.com
VLXEOriginally developed to study polymer systems and complex fluids, VLXE currently offers a special module for the oil and gas industry. This software allows the use of a number of EOS, cubic and non-cubic. Examples of possible calculations with this software are characterization of crude oils and determination of phase envelopes, differential depletion, constant volume depletion, separator test, constant mass expansion, viscosity, density and thermal conductivity prediction. VLXE operates through an interface with MS Excel that makes calculations very flexible. A Software Development Kit (SDK) allows the inclusion of VLXE predefined routines into a user defined computer program. Currently the programming languages that are supported are: C++, C# and Fortran.
Vendor: VLXE Website: http://www.vlxe.com
WAXModel, EOSModelSoftware for wax/paraffin deposition prediction
Vendor: AspWax, Inc. Website: www.asphwax.com
WellModel, TCModel, FDMODELSoftware for asphaltene precipitation modeling and prediction
Vendor: AspWax, Inc. Website: www.asphwax.com
Software Used in the Oil & Gas Industry
76 Jorge Salgado Gomes
F.A.S.T piperGas gathering system analysis. Optimize gas gathering systems by identifying bottlenecks and predicting deliverability of future scenarios.
Vendor: Fekete Website: www.fekete.com
GOSPSIMIt simulates the separator and process flow performance of the gas/oil/water separation plant and the associated downstream processing facilities.
Vendor: EnSys Yocum, Inc Website: www.ensyenergy.com
HysysSimulation of chemical plants and oil refineries. It includes tools for estimation of physical properties and liquid-vapor phase equilibria, heat and material balances, and simulation of many types of chemical engineering equipment.
Vendor: Hyprotech, a subsidiary of AspenTech
K-SpiceIt enables detailed dynamic simulation of oil and gas processes and control systems throughout the whole process lifecycle. It is a Windows based tool with a flexible and intuitive graphical user interface and a wealth of advanced features. K Spice is designed for use across the core applications of: Project feasibility/concept selection, pre-engineering/detailed engineering, commissioning/production start-up, operator training and online operations/maintenance support/process optimisation.
Vendor: Kongsberg Website: www.kongsberg.com
Surface Engineering 16
Software Used in the Oil & Gas Industry
77Jorge Salgado Gomes
LeakWarnIt is the industry leader in providing effective real time pipeline monitoring applications. These applications include leak detection, batch tracking, hydraulic gradient, DRA tracking, product characteristic tracking, and scraper tracking.
Vendor: Simulutions Website: www.simulutions.com
NYIRIt is a GIS system keeping track of high pressure pipeline information. It provides access to all Pipeliline related data in as much detail as possible including as-built, right-of-way, engineering, cathodic protection, inspection information in all aspects. NYIR gives the possibility to track.
Vendor: piLINE Kft Website: www.piline.hu . For sales contact [email protected]
OlgaFlow assurance for wells and pipelines. See description above under section 14.
Vendor: SPT Group Website: www.sptgroup.com
PetroPlanPetroleum refinery planning software with easy to use graphic interface, crude recutting, process models and product blending. A practical alternate to LP based software. Accurate and quick modeling for evaluating alternate processes, feedstocks and products.
Vendor: Ami Consultants, Inc Website: www.amiconsultants.com
PIPEFLOIt is a design software used to calculate mixture composition of hydrates in pipeline, flowing temperature, flowing pressure, PIPEFLO pipeline software also compares the conditions required for corrosion, hydrates, wax, severe slugging, and liquid loading. With PIPEFLO one can
Software Used in the Oil & Gas Industry
78 Jorge Salgado Gomes
determine how these items change with depletion and with operating conditions.
Vendor:Technotrade Website: http://www.technotrade.com.pk
PipeWorksIt is a suite of applications which assist pipeline operators in the safe and efficient operation of their pipeline system. It includes functions such as leak detection, batch tracking, batch scheduling, training simulation, optimization, and energy trading management.
Vendor: Simulution Website: www.simulutions.com
PRODSIMIt is a software for production facilities simulation. It describes the flow performance for the production system beginning at the reservoir, flowing through the well reservoir pay, then up the well, and through the surface or underwater facilities, devices and pipelines to the production manifold.
Vendor: EnSys Yocum, Inc Website: www.ensyenergy.com
PVT-MPMThe EnSys Yocum PVT Meter Correction Programs are capable of correcting multiphase meter liquid and gas flow using PVT data that describes the metered fluid
Vendor: EnSys Yocum, Inc Website: www.ensyenergy.com
TRUNKSIMIt is a powerful software for optimizing the development of fields when trunkline networks operating in single or multiphase flow are being considered for up to 100 oil wells producing simultaneously.
Vendor: EnSys Yocum, Inc Website: www.ensyenergy.com
Software Used in the Oil & Gas Industry
79Jorge Salgado Gomes
AFE Management SystemCapital expenditure workflow, tracking and control system.
Vendor: Halliburton Website: www.halliburton.com
MerakIt handles economics, planning and reserves management. The new release delivers the most significant update to Merak Peep application. It can perform decline analysis and with Merak Volts volume tracking and reporting can also be done.
Vendor: Schlumberger Website: www.slb.com/services/software
PalantirEconomic evaluation software.
Vendor: Fekete Website: www.fekete.com
PEEPEconomic evaluations and decline curve analysis. Merak Peep 2010 introduces the concept of “One” Merak Peep for the whole world including the US and Canada with transparency for fiscal models and faster response to legislative changes.
Vendor: Schlumberger Website: www.schlumberger.com
Economic Analyses17
Software Used in the Oil & Gas Industry
80 Jorge Salgado Gomes
CMOSTSensitivity analysis, assisted history matching, forecast optimization, uncertainty assessment.
Vendor: Computer Modelling Group Modelling (CMG) Website:www.cmgroup.com
CondorFlowTo assist history match; the simultaneous inclusion of the geological realizations and dynamic simulations ensures precise calibration with optimum reproduction of the observed data. Note: the best way for the user to assess the sensitivity of the geological uncertainties is to use the following tools in combination, CobraFlow, PumaFlow, CondorFlow and EasySense.
Vendor: Beicip-Franlab Website: www.beicip.com
CougarDeveloped by IFP for uncertainty analysis
Vendor: Schlumberger Website: www.schlumberger.com
Crystal BallIt is a Monte Carlo simulation program used to solve certain stochastic (involving a random variable) problems where the passage of time plays no substantive role. It is widely used to solve certain statistical problems that are not analytically tractable. The simulation requires that a mathematical relationship (model) be established between the event outcome (expectation) and influence factors (input variables).
Vendor: Oracle Website: www.oracle.com
DMS
Risk & Uncertainty Analyses18
Software Used in the Oil & Gas Industry
81Jorge Salgado Gomes
Reservoir Uncertainty and Optimization Software
Vendor: Halliburton Website: www.halliburton.com
EasySenseIt performs sensitivity analysis to obtain probabilistic distribution of critical factors ensuring confident decision making in a risk-prone environment. It uses experimental design and surface response methods to express simulator behaviour in a probabilistic manner. The software brings a great added value to understand and prepare models before performing assisted history match. Sensitivity analysis can be interpreted geographically and through time so that modellers can better understand the geology and the physics at different stages of the field development. Once the match has been performed, EasySense can be used to identify influential parameters on the forecast and a risk analysis can be executed through Monte Carlo sampling of the response surface. Using experimental design techniques the user can obtain maximum information at the lowest experimental cost by varying all uncertain parameters simultaneously. Each experimental design corresponds to a small set of optimally chosen reservoir simulation runs to encompass the uncertain domain.
Vendor: Beicip-Franlab Website: www.beicip.com
EnABLEThe Roxar EnABLE solution history matches numerous geological scenarios to create simulation models that are fully consistent with their underlying geological interpretation (unlike many current 3D modelling workflows). RMS and Tempest (other products from Roxar) when coupled with EnABLE provide E&P companies with a statistical framework for a rapid understanding of production behaviour and the creation of robust estimates from a shared earth model. The result is more informed technical and economic decision-making and a better quantification of uncertainty.
Vendor: Roxar Software Solutions Website: www.roxarsoftwareportal.com
Software Used in the Oil & Gas Industry
82 Jorge Salgado Gomes
GeoXIt is a software for stochastic assessment of resources, risks and economic value. The software is designed explicitly to support mission critical asset management decisions in oil and gas exploration projects. A distinctive model-based architecture working over the industry-standard database promotes effective use and integration of data and judgment in decision-making.
Vendor: Geoknowledge Website: wwww.geoknowledge.com
MEPOTo assist history match; Uses experimental design (Latin hyperbole sampling) to select the least number of input parameters required to achieve the match. It links with VIP, CMG, MORES, Eclipse, Frontsim. The optimization mechanism is based on genetic algorithms (evolutionary strategy). It accepts multiple models and tries to obtain the match for all of them.
Vendor: SPT Website: www.sptgroup.com
PetroVRIt is a fully-integrated decision making software suite for E&P development planning that supports risk and uncertainty modeling for the entire opportunity lifecycle, from sub-surface to surface.
Vendor: Caesar Systems Website: www.petrovr.com
PrecisionTreeAllows the user to build decision trees in Excel, enabling the user to visually map out complex, multi-layered decisions in a sequential, organised manner
Vendor: Palisade Website: www.palisade.com
TopRankPerforms automated “what if” sensitivity analysis on Microsoft Excel spreadsheets – and is excellent for auditing
Software Used in the Oil & Gas Industry
83Jorge Salgado Gomes
models. Define any output or “bottom line” cell or cells, and TopRank will automatically find and vary all input cells which affect your output.
Vendor: Palisade Website: www.palisade.com
@RISKIncorporates a technique called Monte Carlo simulation which enables the user to represent uncertainty (risk or opportunity) in Microsoft Excel.
Vendor: Palisade Website: www.palisade.com
RISKOptimizer and EvolverAre both optimisation programs which are based on genetic algorithms. They are both designed to solve non-linear, complex problems and they way they work is by constantly trying to find new solutions to problems – and then building on those solutions to find even better solutions. The difference between the two products is that RISKOptimizer allows the user to also build in uncertainty to the optimisation model by using Monte Carlo Simulation.
Vendor: Palisade Website: www.palisade.com
SimERIt is an advanced computer code for the simulation of environmental risks sssociated with site end points.
Vendor: Quintessa Website: www.quintessa.org/software
TESLAIt is a software tool based on Evidence Support Logic (ESL), which aims to support and identify the amount of uncertainty or conflict in the decision making process. It provides a means to break the decision down into a hierarchical structure, simplifying the problem and presenting it in such a way that information can be easily gathered and categorised. TESLA does not automate the
Software Used in the Oil & Gas Industry
84 Jorge Salgado Gomes
decision-making process but provides valuable support to the decision maker.
Vendor: Quintessa Website: www.quintessa.org/software
TREE2000It is a decision tree software which embodies a highly customizable tool for risk management and informed decision making. Variables such as price, production, and operating costs contain unknowns that must be accounted for when looking at the value of a given decision or project. Decision tree software allows you to apply all the information you have on various unknowns and give you the <big picture> of the situation, showing how that information affects your future and current choices. This assistance will illustrate possible outcomes of decisions and better inform you of where to invest effort in reducing uncertainties.
Provider: The Department of Energy (USA) Website: www.netl.doe.gov/technologies/oil-gas/software
Software Used in the Oil & Gas Industry
85Jorge Salgado Gomes
AFE Management SystemCapital expenditure workflow, tracking and control system.
Vendor: Halliburton Website: www.halliburton.com
AssetViewOilfield visualization software; it provides a cross-disciplinary, 3-D asset visualization and collaboration viewer for all applications in the DecisionSpace environment.
Vendor: Halliburton Website: www.halliburton.com
DTSPlusIt is an application for reviewing and managing distributed temperature sensor (DTS) data. It provides temperature profiling data viewing, analysis and management. The data can be exported to SQL databases, LAS, POSC (PRODML) and ASCII format files. The displays include animations relative to baseline DTS data and user-specified data interval density (in time).
Vendor: Weatherford International Website: www.ep-solutions.com
FORGASIntegrated Field Forecasting tool. FORGAS is one of the most reliable and efficient solution to model some of the largest gas fields in the world. It is used to evaluate compression options, to determine drilling schedules, to quantify backout or field constraints, to evaluate gathering system modifications, and to investigate infill drilling and competitive drainage options.
Vendor: Scandpower Petroleum Technology Website: www.sptgroup.com
Management Tools19
Software Used in the Oil & Gas Industry
86 Jorge Salgado Gomes
i-DOThis software links real-time downhole, surface and corporate data sources to ensure that reservoir, well and facility models are constantly monitored and updated to reflect actual operating conditions. The system integrates production data management and reservoir modeling with transient pressure analysis, well modeling and surface network modeling and optimization.
Vendor: Weatherford International Website: www.ep-solutions.com
InnerLogix E&PEnables geoscientists to analyze and QC seismic data, projects, and logs. The software contains 7 modules.
Vendor: Schlumberger Website: www.slb.com/services/software
LOWISThis software is a web-based, enterprise-wide, well management suite designed to help improve the bottom line for any oil and gas production operation. By reducing lifting costs, optimizing workflows and minimizing the financial risk associated with the evolution of new technologies, this innovative software suite can help companies better achieve their financial goals and objectives.
Vendor: Weatherford International Website: www.ep-solutions.com
MetaCartaIt is a system that creates a searchable index of geographic locations and keywords, contained within structured documents located in disparate data sources and displays them on a map. It makes the integration between document management and GIS systems.
Vendor: Schlumberger Website: www.slb.com/services/software
OFMIt is a well and reservoir management analysis software offering advanced production surveillance views and
Software Used in the Oil & Gas Industry
87Jorge Salgado Gomes
powerful production forecasting tools to help the engineers and geoscientists better manage production and track reserves.
Vendor: Schlumberger Website: www.slb.com/services/software
PetroAtlasIt is a web based mentoring and guidance system for petroleum production personnel. This robust linked knowledge management system is preloaded with thousands of pages of guidance properly linked to best practices, work flows, and tasks leading production engineers through the labyrinths of variables to reach optimum results.
Vendor: Weatherford International Website: www.ep-solutions.com
ProSource E&PIt is a professional data management suite of products to streamline essential workflows of the IM professional. ProSource E&P software is based on the Seabed open data model enabling complete data storage and the integration of domains.
Vendor: Schlumberger Website: www.slb.com/services/software
Resource Scheduler Gantt-based planning tool for resource scheduling and logistics.
Vendor: Halliburton Website: www.halliburton.com
RigPlanIt is a desktop scheduling tool providing the visualization and control needed to assure that rigs and assets are effectively used. The user interface provides a multi-level calendar that displays where each rig is currently working, its expected completion time, and the time frame for the next scheduled job.
Software Used in the Oil & Gas Industry
88 Jorge Salgado Gomes
Vendor: Weatherford International Website: www.ep-solutions.com
RMSIt is highly flexible, scalable data acquisition software that supports Weatherford’s production optimization–reservoir monitoring optical sensing and electronic gauge product lines.
Vendor: Weatherford International Website: www.ep-solutions.com
WSM
WSM stands for Well Service Manager software and it is used to prioritize and plan well service events. It presents histories in comparative graphs and reports to help determine best operating practices. Web reporting tools facilitate enhanced information exchange across the enterprise to help you understand your operational issues and cost drivers. Specific service events are included in the package for tubing and rod failures, pump failure workovers and workover costs trended over time.
Vendor: Weatherford International Website: www.ep-solutions.com
Software Used in the Oil & Gas Industry
89Jorge Salgado Gomes
CygNet EOPCygNet Enterprise Operations Platform (EOP): Unlike other SCADA systems, CygNet EOP unlocks the value of real-time, configuration, and historical information by making it accessible to more data consumers. The platform delivers a unified information ecosystem by efficiently communicating with industry leading field devices, other industry software packages, and third-party systems already in place. New enterprise integration capabilities extend the platform’s flexible support for business processes. These improvements eliminate IT time and effort, enabling customers to rapidly realize the benefits of asset optimization, performance analytics, and KPI tracking delivered from Operations to the business.
Vendor: Weatherford International Website: www.cygnet.com
CygNet for ProductionIt is a vertical industry solution designed exclusively for gas production and midstream operations. It provides a proven, tested set of functionality specific to well field operations, right out of the box. CygNet for Production enhances operational efficiency and TCO, by reducing system replacement time and the resources required to deploy and enterprise SCADA system. It features standardized E&P operations functionality that speeds successful implementation.
Vendor: Weatherford International Website: www.cygnet.com
i-DOThis software links real-time downhole, surface and corporate data sources to ensure that reservoir, well and facility models are constantly monitored and updated to reflect actual operating conditions. The system integrates production data management and reservoir modeling with
I-Field Applications20
Software Used in the Oil & Gas Industry
90 Jorge Salgado Gomes
transient pressure analysis, well modeling and surface network modeling and optimization. The system can be applied without modification to a wide range of production optimization problems, including downhole controls in smart wells and intelligent completions.
Vendor: Weatherford International Website: www.ep-solutions.com
IMpulseIMpulse is ISI>s software product for real-time data analysis managing and analyzing the high frequency data streams transmitted by permanent downhole devices. Using state of the art in Artificial Intelligence and Data Mining IMpulse provide real-time well monitoring, real-time single-well modeling and real-time adaptive DCA and PTA. Furthermore, IMpulse provide reservoir analysis for the Smart Fields interfacing with ISI>s IMpact and IMagine products for fast track reservoir simulation and modeling and reservoir management.
Vendor: Intelligent Solutions, Inc. Website: www.IntelligentSolutionsInc.com
WellScribeIt is a mobile application that collects information on a well service rig as events occur in real time and syncs that information with corporate data stores immediately. WellScribe screens are designed to accommodate field use through a variety of devices that are able to handle the rigors of life in the field.
Vendor: Weatherford International Website: www.weatherford.com
Software Used in the Oil & Gas Industry
91Jorge Salgado Gomes
DbmapIt is a PPDM compliant database management, mapping, reporting and query system for the petroleum exploration and development industry, with particular emphasis on the use of knowledge for presentation and query on maps.
Vendor: Petrosys Pty. Ltd Website: www.petrosys.com.au
Decision Space (R5000 release) It is a development environment that gives the user the choice and flexibility to work their way in the exploration and production domain, using landmark applications.
Vendor: LandMark Website: www.halliburton.com/landmark
ERGOReservoir geometry analog database (environments, reservoirs, geometries, objects)
Vendor: Fugro-Robertson Website: www.fugro-roberston.com
FINDERRelational database for the oil and gas industry. This database eventually will be replaced by Seabed.
Vendor: Schlumberger Website: www.schlumberger.com
LogDBIt is an application database for well related data (logs, image data, cores etc).
Vendor: Schlumberger Website: www.slb.com
ODM3It is an oil field data manager using a relational database.
Databases21
Software Used in the Oil & Gas Industry
92 Jorge Salgado Gomes
Vendor: Senergy Website: www.senergy.com
OFMIt is an E&P database (Oil Field Manager), which handles exploration and production data, maps, charts etc.
Vendor: Schlumberger Website: www.slb.com
OpenWorksRelational database for the oil and gas industry
Vendor: LandMark Website: www.halliburton.com
PetrisWINDS RecallIt is the industry-leading solution for the handling, storing, and processing of well bore data. PetrisWINDS Recall has the ability to store, process, and interpret drilling, core, open-hole, or production data in a comprehensive and integrated framework. It is a multi-platform system that scales from single-user laptops and project data stores up to corporate databases and national archives.
Vendor: Petris Website: http://www.petris.com
PowerExplorerWeb-based GIS data management tool with advanced capabilities to browse and manage spatial and tabular E&P data.
Vendor: Halliburton Website: www.halliburton.com
RavenIt is a new suite of applications that run extensive investigations on data loaded into Recall databases and provide rule-based evaluation of data quality and metrics,
Software Used in the Oil & Gas Industry
93Jorge Salgado Gomes
thereby reducing the effort required to validate data. In addition, it will provide all the information necessary to improve the quality of – and user confidence in – borehole data.
Vendor: Petris Technology Inc Website: http://www.petris.com/impetus
RECALLIt is a popular application for managing, storing and processing wellbore data. Version 5.3 includes major enhancements to data integration, workflow, search tools and database security. We can easily integrate logs, image data, cores etc.
Vendor: Petris Technology Inc Website: http://www.petris.com
SeabedIt is the new Schlumberger database and information management system. It has an admin interface called ProSource and an end user interface called ProSource Front Office. Seabed will ultimately replace Finder.
TGSE&P database
Vendor: TGS-NOPEC Geophysical Company, Norway Website: www.tgsnopec.com
Verge This software provides a view of current operations in an easy-to use interface that displays field data in meaningful ways. The data can be combined and displayed to provide simplistic views of complex analysis. This data provides the answers to real-life issues that occur in producing oil and gas fields.
Vendor: Weatherford International Website: www.ep-solutions.com
Software Used in the Oil & Gas Industry
94 Jorge Salgado Gomes
ZEMA SuiteThe ZEMA Product Suite is the pairing of a massive self populating energy database with an advanced set of web based tools that help you manage, view, analyze and easily distribute market intelligence within your organization.
Vendor: ZE PowerGroup Inc. Website: www.zemasuite.com
Software Used in the Oil & Gas Industry
95Jorge Salgado Gomes
Notes:
Software Used in the Oil & Gas Industry
96 Jorge Salgado Gomes
Notes:
Main Software ApplicationsUsed In the Oil & Gas Industry
Compiled & Edited
ByJorge Salgado Gomes PhD
November 2012THE PETROLEUM INSTITUTEP.O. Box 2533, Abu Dhabi, United Arab Emirates
Tel: +971 2 607 5100, Fax: +971 2 607 5200E-mail: [email protected]