photosensor module h13229 series / h14211 …...photosensor module h13229 series / h14211 series *1...
TRANSCRIPT
PHOTOSENSOR MODULE
H13229 SERIES / H14211 SERIES
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications aresubject to change without notice. No patent rights are granted to any of the circuits described herein. ©2018 Hamamatsu Photonics K.K.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
H13229 series and H14211 series are photosenser modules that comprise a metal package PMT and high voltage power supply circuit. These make stable operation possible under vacuum or decom-pression environment. These provide low power consumption and low gas release by our manufacturing method and construction.
PRODUCT VARIATION
SPECIFICATIONS
Type No.H13229-110 / H13229P-110H13229-210 / H13229P-210H13229-01 / H13229P-01H13229-20H14211-110 / H14211P-110H14211-210 / H14211P-210H14211-01 / H14211P-01H14211-20H14211-04 / H14211P-04H14211-113 / H14211P-113
Spectral response300 nm to 700 nm300 nm to 700 nm300 nm to 870 nm300 nm to 920 nm230 nm to 700 nm230 nm to 700 nm230 nm to 870 nm230 nm to 920 nm185 nm to 870 nm185 nm to 700 nm
PhotocathodeSuper bialkaliUltra bialkaliMultialkali
Extended red multialkaliSuper bialkaliUltra bialkaliMultialkali
Extended red multialkaliMultialkali
Super bialkali
Window material
Borosilicate glass
UV glass
Notes
P type:for photon counting
*1 At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current. *2 Control voltage = +1.0 V*3 These values are of a built-in PMT. There is a glass window which has 93 % transmittance in front of the PMT.*4 Measured at the peak sensitivity wavelength. *5 After 30 minutes storage in darkness output of dark current.*6 Cable RG174/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF*7 The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *8 No condensation
Min.Typ.Typ.Typ.Typ.Min.Typ.Typ.Typ.Max.Typ.Max.
Max.Max.
Input voltageMax. input voltageMax. input current *1
Max. output signal current *2
Max. control voltageRecommended control voltage adjustment rangeEffective areaPeak sensitivity wavelength
Luminous sensitivity
Blue sensitivity index (CS 5-58)Red/White ratioRadiant sensitivity *4
Luminous sensitivity *2
Radiant sensitivity *2*4
Dark current *2*5
P type dark count *2*5
Rise time *2
Ripple noise *2*6 (peak to peak)Settling time *7
Operating ambient temperature *8
Storage temperature *8
Working pressureWeight
4008010513.5—
11080210
2.2 × 105
11050100
40010013515.5—
130100270
2.6 × 105
11050
100
+2.8 to +5.5+5.52.7100
+1.1 (Input impedance 1 MΩ)+0.5 to +1.1 (Input impedance 1 MΩ)
8
0.570.510
+5 to +50-20 to +50
Atmospheric pressure to 0.001 Pa37
400100200—0.277
100400
1.5 × 105
110
6001000
Unit
VV
mAµAVV
mmnm
µA/lm
——
mA/W
A/lm
A/W
nA
s-1
nsmVs
°C°C—g
H13229-210H13229P-210
H13229-01H13229P-01
630350500—
0.4578
3501000
1.5 × 105
10100——
H13229-20H13229-110H13229P-110Parameter
Cat
hode
*3
Ano
de *
3
Stan
dard
type
●H13229 series
▲Left: H13229, Right: H14211
Operable under vacuum or decompression environment
PHOTOSENSOR MODULEH13229 SERIES / H14211 SERIES
*1 At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current. *2 Control voltage = +1.0 V*3 Measured at the peak sensitivity wavelength. *4 After 30 minutes storage in darkness output of dark current.*5 Cable RG-316/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF*6 The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *7 No condensation
Min.Typ.Typ.Typ.Typ.Min.Typ.Typ.Typ.Max.Typ.Max.
Max.Max.
Input voltageMax. input voltageMax. input current *1
Max. output signal current *2
Max. control voltageRecommended control voltage adjustment rangeEffective areaPeak sensitivity wavelength
Luminous sensitivity
Blue sensitivity index (CS 5-58)Red/White ratioRadiant sensitivity *3
Luminous sensitivity *2
Radiant sensitivity *2*3
Dark current *2*4
P type dark count *2*4
Rise time *2
Ripple noise *2*5 (peak to peak)Settling time *6
Operating ambient temperature *7
Storage temperature *7
Working pressureWeight
4008010513.5—
11080210
2.2 × 105
11050100
40010013515.5—
130100270
2.6 × 105
11050
100
+2.8 to +5.0+5.52.7100
+1.1 (Input impedance 1 MΩ)+0.5 to +1.1 (Input impedance 1 MΩ)
8
0.571
10+5 to +50-20 to +50
Atmospheric pressure to 0.001 Pa74
400100200—0.277
100400
1.5 × 105
110
6001000
Unit
VV
mAµAVV
mmnm
µA/lm
——
mA/W
A/lm
A/W
nA
s-1
nsmVs
°C°C—g
H14211-210H14211P-210
H14211-01H14211P-01
400100200—0.277
100400
1.5 × 105
110
6001000
H14211-04H14211P-04
40080
10513.5—
11080
2102.2 × 105
11050
100
H14211-113H14211P-113
630350500—
0.4578
3501000
1.5 × 105
10100——
H14211-20H14211-110H14211P-110Parameter
Cat
hode
Ano
de
Stan
dard
type
SPECIFICATIONS●H14211 seriesThis product can change a built-in PMT upon request. Please consult with us.
Figure 1: Spectral response
2001000.1
1
10
100
1000
400 600
WAVELENGTH (nm)
CA
TH
OD
E R
AD
IAN
T S
EN
SIT
IVIT
Y (
mA
/W)
800 1000300 500 700 900
H14211-20
H14211-210
H14211-110H14211-113
H14211-04
H14211-01
0.1200100 300 400 500 600 700 800 900 1000
1
10
100
1000
WAVELENGTH (nm)
CA
TH
OD
E R
AD
IAN
T S
EN
SIT
IVIT
Y (
mA
/W)
H13229-20
H13229-210
H13229-110
H13229-01
Figure 2: Gain Figure 3: Sensitivity adjustment method
CONTROL VOLTAGE (V)
GA
IN
107
106
105
104
103
0.5 0.6 0.90.80.7 1.0 1.21.1
Figure 4: Typical output current v.s. input current
Figure 5: Typical output current v.s. input current
+5 VGND
+5 VGND
SIGNAL OUTPUTLOW VOLTAGE INPUT (RED)
GND (BLACK)Vref OUTPUT (BLUE)Vcont INPUT (WHITE)
PHOTOSENSOR MODULE POWER SUPPLY
POWER SUPPLYPHOTOSENSOR MODULE
+0.5 V to +1.1 V
SIGNAL OUTPUTLOW VOLTAGE INPUT (RED)
GND (BLACK)Vref OUTPUT (BLUE)Vcont INPUT (WHITE)
POTENTIOMETER (10 kΩ)
MONITOR
CW
GND
• Adjust the control voltage to adjust the sensitivity.
• Electrically insulate the reference voltage output.
RESISTANCE PROGRAMMING
VOLTAGE PROGRAMMING
* When using a potentiometer, adjust sensitivity while monitoring the control voltage so it does not exceed +1.1 V.
** When input voltage is +4 V or less, please set resistance of potentiometer to 100 kΩ.
0
20
40
60
80
100
120
0 2 4 6 8 10 12 14 16 18 20 22 24
RE
LAT
IVE
OU
TP
UT
CU
RR
EN
T (
%)
TIME (h)
100 Pa0.001 PaAtmospheric pressure
[Conditions]Supply voltage: +5 VControl voltage: +1.1 VInitial output current: 100 µA
0 20 40 60 80 1000
2
4
6
8
10
OUTPUT CURRENT (µA)
INP
UT
CU
RR
EN
T (
mA
)
INPUT VOLTAGE: +5 VCONTROL VOLTAGE: +1.0 V
TPMO1086E01OCT. 2018 IP
PHOTOSENSOR MODULEH13229 SERIES / H14211 SERIES
HAMAMATSU PHOTONICS K.K.HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, NJ 08807, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected]: Hamamatsu Photonics Deutschland GmbH.: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-265-8 E-mail: [email protected]: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court,10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, UK, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509 031 00, Fax: (46)8-509 031 01 E-mail: [email protected]: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93 58 17 33, Fax: (39)02-93 58 17 41 E-mail: [email protected]: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, 27 Dongsanhuan Beilu, Chaoyang District, 100020 Beijing, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]: Hamamatsu Photonics Taiwan Co., Ltd.: 8F-3, No.158, Section2, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C. Telephone: (886)03-659-0080, Fax: (886)03-659-0081 E-mail: [email protected]
Figure 6: Dimensional outline (Unit: mm)
●H13229 series
●H14211 series
FRONT VIEW SIDE VIEW
LOW VOLTAGE INPUT (+5 V)GNDVcont INPUT (0.5 V to 1.1 V)Vref OUTPUT (+1.2 V)
Red:Black:White:Blue:
WINDOW
SIGNAL OUTPUTRG-316/U
24 4 × M2 DEPTH 5
EFFECTIVE AREA ( 8 MIN.)
10
30.
0 ±
0.1
1
56.5 ± 0.5 450 ± 20 10 5
POWER INPUT CABLE, TFE
FRONT VIEW SIDE VIEW BOTTOM VIEW
EFFECTIVE AREA ( 8 MIN.)
18.6 1.7
10.16
5.08
97
102
21.5
GLASS CASE
1:7:8:9:
10:12:
Others:
Vcont INPUT (+0.5 V to +1.1 V) LOW VOLTAGE INPUT (+5 V) Vref OUTPUT (+1.2 V)SIGNAL GNDSIGNAL OUTPUTGNDNOT CONNECTED
Guide mark
12 × 0.45
1 2 3
9 8 7
456
121110
WINDOW
10.1
6
5.08