phone: (510) 214 3961 the future of chemistry - · pdf filethe future of chemistry 5/24/2016...
TRANSCRIPT
The Future of Chemistry
5/24/2016 1.2 To the best of our knowledge the information contained herein is accurate and reliable as of the date of publication. However, Molecule Corp makes no warranty, expressed or implied regarding the accuracy of the data and results to be obtained from the use thereof.
Molecule
5110 Port Chicago Hwy
Concord CA 94520
Phone: (510) 214-3961
E-mail: [email protected]
The Future of Chemistry
Ta—Tack Away Description
Molecule Engineering Grade products are high performance fluids developed to be highly consistent with
extraordinary attributes. Molecule's Post Processing Ta Tack Away fluid is specifically designed to remove
tack or stickiness from 3D printed parts. Ta Tack Away should be applied after the printed part has been
post processed and fully post cured. The part should be quickly dipped in the Tack Away solution and then
removed to air dry. Parts should be fully dry in 2-5 minutes, after which they can be handled and used.
Parts should never be left to soak in the Tack Away solution, as extended soaks may alter the mechanical
properties of the part. Tack Away a semi-permanent solution for removing tack, meaning that if the part is
used or handled extensively, Tack Away may need to be re-applied. Tack Away can be applied as many
times as necessary.
Order Now!
Order Details
Molecule SKU Molecule Description
100017—750G Tack Away Version 1—Crystal Clear—3/4 Kilogram
PRO TIP: Generally, the tack or stickiness that you feel on the part is due to the part having a
low glass transition temperature (Tg),near or below ambient conditions. This means that Tack
Away should be used primarily for soft/flexible resins. If you are feeling tack or stickiness on a
rigid part, the part is probably not fully post cured. Tack Away is not a replacement or
substitute for post curing!