phoenix service software flashing guide

Phoenix Service Software 2008

How to use guide by – joneywalker4u

Both the tutorial uses Nokia 5700 Xpress Music phone, choose firmware according to your own handset.

NOTE: I take no responsibility what so ever.

Compiled 12 June 2008

For Normal flashing (phone is on and in working condition)

1) Open Phoenix service software, click manage connections.

2) Software and setup connection (I am using USB connection like DKE-2 cable). If you have F-BUS cable like CA-53 you can use FBUS connection.

Sample Flash log looks like this

Flashing started

Creating product data items list

Product data items list created

Backup not required

Flashing phone

Initializing

Asic CMT: Verifying communication to device...

Getting product info...

Loading image files...

AdlServer: Rebooting...

Closing connection

Waiting for USB device. Press phone's power button (if you start from dead terminal)

ROM Boot Drivers loaded. Creating RAW connection

Connecting to device...

Connection opened

Connection opened to BootCode successfully

First wait command failed. Preparing for bootrom waiting loop ...

Sending Wait Request...




















Flashing Secondary boot code: 14848 Bytes

Sending USB data: 28%




Secondary boot loaded

Skipping USB handshake...

Flashing Update Server Data: 2051785 Bytes

Flashing UPS data: 0%











Update server loaded

Waiting for Update Server to boot...

Closing connection

Connecting to device...

Connection opened


Initializing Update Server....




Asic CMT: Selecting programming blocks...

Warning: PAPUBKEY already selected

Flashing SingleAsic device...

Asic CMT: Start programming 66447 KB...

Asic CMT: Erasing rm230_04.21_prd_core.fpsx

Asic CMT: Erasing area 1...



Asic CMT: Partitioning rm230_04.21_prd_core.fpsx

Asic CMT: Partitioning area 1...

Asic CMT: Erasing rm230_04.21_prd_v15_01_apac2.fpsx


Asic CMT: Erasing rm230_04.21_prd_uda_erase.fpsx






Asic CMT: Programming rm230_04.21_prd_core.fpsx

Asic CMT: Programming 0%

































Asic CMT: Programming rm230_04.21_prd_v15_01_apac2.fpsx



















Asic CMT: Programming rm230_04.21_prd_uda_erase.fpsx



Finished Flashing

Rebooting to RFS Mode


Waiting for communication response: 25

BB5 USB Flashing succeeded

Phone flashing completed. Waiting for phone to boot up

Bootup successful

Verifying communication to product (before flash finalizing)

Communication verified

Started product mode change

Product mode change complete

Doing factorysets

Factorysets complete

Loading default data to phone

Loading default data to phone

Getting Data Package

Reading product state

Starting backup/restore sub-procedure: data item pre-delay

data item pre-delay

data item pre-delay

Sub-procedure completed: Succeeded., result code: 0

Starting to backup/restore data item: ProductProfile, version: 1.0

Data Item backup/restore completed: Succeeded., result code: 0

Starting backup/restore sub-procedure: data item post-delay

data item post-delay

data item post-delay

Sub-procedure completed: Succeeded., result code: 0

Backup/restore result: 0 out of 1 items were not backed up

Default data loading complete

Stopping all operations, returning phone to default mode

All operations completed

Product flashing succeeded.

For Dead Phone Flashing (phone doesn’t turn on, white screen only,

something went wrong while flashing.)

Connect your phone (switch off) via cable.

1) Open Phoenix service software, click, manage connections.

When flashing begins, it pauses for some time and now you have to switch on the phone to continue.

I don’t have a sample log for the moment for dead flash.

phoenix service software flashing guide

Documents