philmore pg.273-289 catalog

273

PRINTED CIRCUIT ACCESSORIES

DATA MARK SERIESDRY TRANSFER (rub-down) TITLES & LABEL SETS

The DATAMARK series is economicalbecause the sets are selective to keep themsmall; each set covers titles used in a specificsegment of electronics. Small alpha/numericsets are also listed in this series. The variouselectronic titles contain five sheets of titles plusone alpha/numeric characters sheet (sheetsize: 3.25” x 5”). The alpha sets contain sixsheets of both letters and numbers in anassortment of black, white and gold characters.DATAMARK series characters should be pro-tected with DATAKOAT or HARDKOAT protec-tive coatings when used on panels or chassis.DATAK’s classic sharpness and high qualitylook is assured throughout.

ELECTRONICS TITLE TYPE

AUDIO, TV & HI-FI

AMATEUR RADIO

EXPERIMENTER,HOME & INTERCOM

TEST & INDUSTRIAL

MARKS & SWITCH PATTERNS

HAM RADIO

HOME THEATRE

PERSONAL COMPUTER

DESCRIPTION

Titles cover the audio, recordingand stereo areas.

For all RF and communications

terms like “attic fan”, “laundry”, or“RESET” & “ADJUST”.

for marking scopes, plotters etc..and industrial system panels.

Arrows, lines, graduations androtary switch patterns.

UPDATED with latest terms and titles.

All titles needed for completeHome Theatre Installation.

Titles cover all computer applica-tions, hook-ups and installations.

Part No. Black

K58BLK

K59BLK

K60BLK

K61BLK

K62*

K70B

K72B

K74B

Part No. White

K58WHT

K59WHT

K60WHT

K61WHT

K62*

K70W

K72W

K74W

Alphabet and Numeral sets contains (3) black, (2) white and (1) gold sheet of letters and numerals:

No. K63 - 1/8” letters and numerals No. K64 - 1/4” letters and numeralsNo. K65 - 1/2” letters and numerals

* - Set has both black and white patterns in one set.

ALPHA and NUMERIC COMPONENT DESIGNATIONS TM

The following are sheets of either letters or numerals for components identification on drawings, schematic and so on. The typestyle is 12 point News Gothic which matches the type in Datak catalog numbers 9581 and 9661 component designation sets.These are dry transfers. Numerals from 0 to 1099 can be made by using sheets numbered from K35/35 thru K35/40; sheet 40being designed for the last two digits of large numbers. Higher numerals can be made without much more effort: burnish only theparts that you want. On paper and cardboard (i.e. porous materials) use of Datak HARDKOAT No. 04171 or No. 04170 is neededfor long term durability.

Part # Sample of contents

K35/26 AABBCCDDEEFFGGK35/28 HHIIMMNNOOWWXXZZK35/30 KKLLCCTPTPK35/32 RRRRRRRRRRRRK35/34 ABC (through) ZK35/36 2 20 3 30.............K35/38 6 60 7 70.............K35/40 00 01 02...........99

Part # Sample of contents

K35/27 CCCCCCCCCK35/29 JJJJJJJPPPPPPPK35/31 QQQQQQQQQQK35/33 SSSTTTUUUVVVK35/35 1234567890 1 10...K35/37 4 40 5 50.............K35/39 8 80 9 90.............

TM

COMPONENT DESIGNATION SETS(Industry standard size, rub-down type)

No. 9661 - Designation set in BlackNo. 9671 - Designation set in White

Used for component identification on PC boards or terminal and chas-sis markings. This is a set of 24 sheets (3.5” x 5”) of rub-down letters,letters combination and numerals as follows:12 sheets of letters and letter combinations11 sheets of numbers 1 through 20 and 1 thru 2271 sheet of numerals 0 through 9Designations conform to accepted stan-dards such as ANSI Y3202 and IEEESTD 315.The 12 point News Gothictypeface matches the 12 point (1/8”)Professional Title sets in Datak’s Jotdraftdesignation sets. This series should beprotected with DATAKOAT liquid No.04176. No. 04158 burnishing tool is sug-gested; ball point pen may be used.

™

TITLES for Electronic Equipment

Each set contains 2200 rub-down titles and labels forelectronic panels, name plates etc.. Razor-sharp lettersmake prototypes look clean and professional; provideexcellent detail when used on drawing or PC board art-work. Frequently used titles and designations appearseveral times. The title selection is kept current via userpolls. In addition to titles, both sets also contain a gen-erous supply of alpha and numeric characters for creat-ing special titles. The 10 point size is about 0.110”high and we recommend for miniature panels. The 12point letters are about 0.125” high. We recommendprotective coating of the applied titles with DATAKOATliquid No. 04176 on circuit boards and panels. Onpaper or vellum, use HARDKOAT matte No. 04171 orgloss No.04170

Description Color No. 10 point titles black 948D10 point titles white 949D12 point titles black 958112 point titles white 9591

TM

274


SMALL DIRECT ETCH KITkit containing 8 sheets and 2 rolls of draft-

ing tape, 1/16” and 1/32” widths. The pat-terns are fairly good sampling that will beneeded for most small circuits using com-mon components such as IC’s, resistors,transistors etc. Very economical.

No. ER-2 - Small Direct Etch Kit

TWO HANDY DIRECT ETCH FILLERS KITS ASSORTEDDONUTS PADS

The most needed Direct Etch pattern, this kit contains a widerange of donuts on four DE-series sheets.

No. ER-13 -Assorted Donut PadsDIP, FLATPACK and SO PADSThis is a four sheets assortment of the most needed IC padsfor DIP’s and more. The larger dips can be used in part tomake smaller size; i.e. 14 may be used to make an eight etc...

No. ER-14 -Dip, Flatpack Kit

COMPLETE PRINTED CIRCUIT KITIncludes PC blank boardsThe Datak ER-1 kit contains all of the items needed to makeseveral PC boards. Included are: a large assortment of resistpatterns, universal DIP’s, assorted donut sizes, transistors,round can IC’s, dry transfer lines and resist tapes. Four blankcopper boards and ferric-chloride etchant concentrate areincluded in this comprehensive kit; the plastic packaging boxdoubles as an etch tray

No. ER-1

Datak Direct Etch Patterns allow you to make PC boards without creating artwork. Apply DE-series patternsdirectly to the copper PC board surface by rubbing them down in the circuit pattern that you want. Connectbetween component patterns either with rub-down, DE-series resolution is superb; resist lines down to .015”etch cleanly with about .001” undercut in a manual etch bath; far better in a spray etch tank.

INTRODUCTIONDirect Etch resist patterns are supplied in sets on individual carriersheets like those shown to the right. Most sets contain enoughpatterns to make dozens of average size PC boards. The kits list-ed below offer a quick-start, money-saving way to begin. On thefollowing pages are listed numerous patterns available separately;a variety that covers all types of components.The Datak Direct Etch patterns are supplied on a semi-transpar-ent, blue-tinted carrier sheet and may be burnished down either toa copper surface, or to drafting film to create original artwork.

Donuts .080”,1/8”.188”, 1/4” Dia

DIP’s Flatpack orSO pads, 2 sheets

.156” ,.125” con..062” patterns

8 and 10 pinround can IC’s

DIRECT ETCH RESIST PATTERNS AND KITS

Part No. MS1MS2MS3MS4MS5MS6MS7MS8MS9DMS10DMS11DMS12DMS13DMS14D

Part No. MS15D

MS16DMS17DMS18MS19DMS20MS015MS031MS040MS062MS080MS093MS125

Qty. / Pack3003803803803803803602401609696

1448432

Qty. / Pack32

3219224030440-------

DESCRIPTIONDonuts .080” OD x .020” IDDonuts .080” OD x .031” ID (0.20” x 0.30” centers)Donuts .093” OD x .031” ID (0.20” x 0.30” centers)Donuts .100” OD x .031” ID (0.20” x 0.30” centers)Donuts .125” OD x .031” ID (0.20” x 0.30” centers)Donuts .150” OD x .031” ID (0.20” x 0.30” centers)Donuts .187” OD x 0.31” ID (.250” x .250” centers)Donuts .218” OD x 0.31” ID (.312” x .280” centers)Donuts .250” OD x 0.31” ID (.400” x .400” centers)TO-99 8-Pin patterns, on carrier filmTO-100 10-Pin patterns, on carrier filmTO-18 3-Pin patterns, on carrier filmTO-5 3-Pin patterns, on carrier film*16-Pin dual in-line IC patterns, on carrier film

DESCRIPTION*16-Pin narrow dual in-line IC patterns,on carrier film

*16-Pin narrow DIP pads with through traces.156” spaced card edge connector fingers.125” spaced card edge connector fingers.100” spaced card edge connector fingersAssorted targets and cross hairsBlack PC flex tape, .015” x 720”Black PC flex tape, .031” x 720”Black PC flex tape, .040” x 720”Black PC flex tape, .062” x 720”Black PC flex tape, .080” x 720”Black PC flex tape, .093” x 720”Black PC flex tape, .125” x 720

*Note: The 16-Pin IC patterns may be cut down for 14, 18-pins etc..User Note: The above MS-Series sets Nos. MS1 thru MS9 and MS17, 18 and 19 are dry-transfers and may be used on thecopper board as an etch resist or as drafting patterns. The other numbers are on a transparent carrier film and may be used onlyfor PCB artwork.

MS-SERIES DATAK PCBOARD DRAFTING PAT-TERNS

DIRECT ETCH MASTER ASSORTMENTThe Direct Etch Master Assortment is a comprehensive kit containing the complete range of DE-series patterns. Included aredonut pads, SMD (surface mount) footprints and literally all of the configurations considered to be standard in the industry.Additional items that you will need are burnishing tools such as Datak Nos. 04158 and 04159 and a quality modelers’s knife suchas Datak No. 12161. The DE-series may also be applied to drafting film such as Datak No. MS-1 (although we recommend theuse of Datak JotDraft products for printed circuit artwork.)

Complete Kit - No. DE-973

275


DATAK-FLEXY MARKER Wire MarkersThe best value in wire markers. More quality andmore quantity than any competitor!

These soft conformable vinyl wire markers are usable on wires rangingfrom 0.35” dia. to a maximum 1.125” wire dia. Excellent adhesion to allplastic wire insulation’s as well as to bare metals; use a full wrap aroundon Teflon insulation so that marker can adhere to itself. Extremely goodphysical characteristics.Flexy-Markers are supplied in pocket-sizesets of 24 identical 3.75” x 5.875” cardseach containing 1,056 one ortwo-digit markers, 768 three-digit markers 624 four figuremarkers.Flexy-Marker wire markersare unaffected by immersionin most lubricating andhydraulic oils. Ink is blackthermosetting and fused intobase film for permanency.

Tab has no adhesive. Flick with afingernail, apply marker and pull offin one easy motion.

Adhesive bonds securely, even tovinyls. Markers won’t loosen or falloff in time.

Marker Film is dead-soft. ConformsPerfectly even if wire is flexed.

Legends are baked in. Won’t fade,dissolve or wear off.

3 Perforations are graduated instrength. You can pull off markersections in order as you apply. Savebalance for reuse.

Part No. Description Part No. Description Part No. DescriptionFNOSLASHFNOF1...to...F247F1S22F1S104F23S66F67S104F105S36F137S68F169S00F201S32F233S64F265S96F297S28F329S60F361S92F393S24F425S56F489S20FA....FZFALPHAFBUS****FCOLORS*****

0(NUMBERS)1,2,3....2471 thru 221 thru 10423 thru 6667 thru 104105 thru 136137 thru 168169 thru 200201 thru 232 233 thru 264265 thru 296 297 thru 328329 thru 360361 thru 392393 thru 424425 thru 456489 thru 520 A (letter) A thru ZSee below12 NEMA colors

FL1FL2FL3FL4FPH1FPH2FPH3FT1FT2FT3FT4FT5FT6FT7FT8FGNDFHOTFMINUSFNEGFNEUTFPLUSFPOS

L1L2L3L4PH1PH2PH3T1T2T3T4T5T67FT8GNDHOT-NEGNEUT+POS

FXTRAF110VF115VF120VF208VF220VF240VF277VF440VF480VFACFDCFBLKFBRNFREDFORGFYELFLTGRNFDKBLUFVIOFGRYFWHT

XTRA110V115V120V208V220V240V277V440V480VACDC(black)(brown)(red)(orange)(velvet)(light green)(dark blue)(violet)(gray)(white)

11

1

1

11

11

11

Note: (1)-the color ofthe marker, it has nonomenclature.

*****FCOLORS includes 2 sets (32 stripes)of each 12 EIA , NEMA colors

****FBUS- Sets contains 8 sets (A Thru Z) one set ofeachPOS, NEG, GND, AC, DC, 120V, 240V, HOT, NEUT,PH1, PH2, PH3, L1, L2, L3,L4, XTRA, T1, T2, T3,

OIL RESISTANTTemperature Range:-55ºC to 130C.

Special Wire Marker Sets

These economical package of most popular wire markers have 2cards per display package for occasional user.No. FD1-Four Sets of numbers (1-22)No. FD2-Four Sets letters (A-Z)No. FDAD-44of (AC) and 44 of (DC)No. FDPN-32 of (Pos.) and 32 of (Neg.)No. FD12-2 Sets of numbers (1-22)

2 Sets of letters (A-Z)No. FD16-2 Sets of numbers (1-22)

2 Sets of numbers (23-66)

METER FACE PLATE PATTERNS &SWITCH PANEL MARKINGS (dry transfers)

Datak Meter and Switch Marking Sets permit you to design a control panel that is instantly understandable to the operator. (For additional matching type style, useDatak Nos. 948D, 949D, 9581, 9591, title sets). These patterns may be used for either prototypes or for original art. They will transfer to any smooth, clean surface.When applied to panels, they should be protected with Datak No. 04177 or No. 04178 DATAKOAT. When used on paper, protect the transfer with either No. 04170 orNo. 04171 HARDKOAT.Complete Meter Face and Switch Marking Set. (Contains all patterns below, except white dialplate) - No.968D

Individual Panel Meter or Switch patterns as shown below: Note: Switch patterns fit knobs from 7/16” to 2” in diameter. The marks are set on standard 7.5º and 15ºdetents, but they may be transferred at any angle for special situations. Face plate dial scales (arcs and graduations) are for meter scales from 1” to 5” in radius intwo colors. All of the following K19# sets are packed with four identical sheets per package.

Meter Face MarkingsNo. K19/1 BlackNo. K19/5 Red

No. K19/1 WHITE

Switch Panel MarkingsNo. K19/2 BlackNo. K19/6 Red

No. K19/9 White

Switch Panel MarkingsNo. K19/3 BlackNo. K19/12 RedNo. K19/7 White

Switch Panel MarkingsNo. K19/4 BlackNo. K19/11 Red

No. K19/8 & 10 White

DATAK dry - transfer ALPHABETS & NUMERAL

DATAK’S superior quality provides sharp edge definition for very profession-al looking finished products, whether on artwork for reproduction or on pan-els and name plates. These sets contain 12 identical sheets (3.5 x 5) ofcharacters. Both upper and lower case are included in the alpha sets. Notethat either bold or light face type is available in the 10 point sets.We recommend protective coating of the applied titles with DATAKOAT liq-uid Nos. 04176 or 04177 on circuit boards and panels. On paper or vellum,use HARDKOAT matt finish Nos. 04170 or 04171.

NOTE: 10 POINT = .110” HIGH12 POINT = .125” HIGH

Description Color No. 10 point Bold letters black 950D10 point Bold letters white 951D10 point Bold numbers black 952D10 point Bold numbers white 953D

Description Color No. 12 point Bold letters black 960112 point Bold letters white 961112 point Bold numbers black 962112 point Bold numbers white 9631

Description Color No. 10 point Plain letters black 954D10 point Plain letters white 955D10 point Plain numbers black 956D10 point Plain numbers white 957D

PROJECT CASES

Project Case w/ Battery CompartmentThese are low profile hand held cases with such internal features as PCB

(printed circuit board) standoffs, slots for PCB, and battery compartment.These cases are ideal for Remote Controls, Audio/Video Transmitters,Security Systems, etc. Made of high impact ABS plastic. Available in Blackor Light Gray. Dimensions: 4.37”L X 3.25” W X1.5”H. 9V battery compart-ment

No. PB520 BlackNo. PB524 Gray

Project Case w/ Battery CompartmentThis convenient sized case has a sloped face area which measures 4” X

2.5” with a precut hole. There is a solid insert for the cutout on which youcan mount your own components. The case has internal PCB standoffs, &rubber feet. These cases are ideal for keyboards, controllers, test instru-ments, etc. They are constructed from High Impact ABS plastic and areavailable in Black or Gray. Dimensions: 7.44” L x 4.11” W x 1.30” H(at themain part of the case.). 9V battery compartment

No. PB530 BlackNo. PB534 Gray

Plastic Boxes with Aluminum LidsBlack ABS plastic boxes with aluminum lid. Resists breaking and

easy to drill. Part No. L W HPB140 3.0” 2.0” 1.0”PB145 4-5/16” 2-1/4” 3/4”

Part No. L W HPB160 4-1/8” 2-1/8” 1-1/2”PB165 5.0” 1-3/8” 1-1/2”PB150 4.0” 3.0” 1-1/2”PB170 5-3/4” 3-5/16” 2.0”PB155 5-7/8” 4.0” 2-3/16”PB175 7.0” 4-5/16” 2-3/8”

Plastic Instrument Cases with Plastic LidThese instrument cases are made of ABS plastic with plastic lid and

internal slots to hold PC boards.

Black Part No. L W H

PB100 3-1/4” 2-1/8” 1-1/4”PB110 5-1/8” 2-3/4” 1-3/4”PB120 6-1/4” 3-3/4” 2-1/8”PB130 7-3/4” 4-3/8” 2-3/8”

Grey Part No. L W H

PB180 4.0” 2.0” 1-1/2”PB185 5.0” 2-1/2” 1-1/2”PB190 5-3/4” 3-5/16” 2.0”PB195 7.0” 4-5/16” 2-3/8”

With internal PC Board slots

Sealed ABS EnclosuresThese versatile cases have many uses in the electrical and electronic

industries. They are easily drilled or punched, making them ideal ascircuit enclosures and junction boxes.

Sealed Die-Cast Aluminum EnclosuresThese enclosures are ideal for housing sensitive electronic assemblies,

pneumatic, hydraulic and electrical devices in commercial and industrialenvironments providing effective shielding of EMI & RFI signals.

Part No. L W HPB306 4.5” x 2.55” x 1.180”PB313 4.5” x 3.54” x 2.165”PB320 6.75” x 4.75” x 2.165”

Features>High impact ABS material molded in dark

grey color.>Lids & bases have tongue and groove seal

ing system with a neoprene gasket.> Wall mounting holes and lid fixing screws

are outside sealing area thus preventing theingress of dust and moisture.

>Designed to meet IP65 of IEC529 andNEMA 4 specifications for dust & moisture.

>Internal guide slots for mounting PC boardsvertically

>Bosses on internal base allows fixing of PCboards horizontally or for connection of terminals, etc. into threaded brass inserts.

>Lid fixing screws are M4 stainless steel (non-magnetic) into threaded brass inserts.

> Operating temperatures: -20o-+80oC

Features & Specifications>Die-cast aluminum alloy, resistant to atmos

pheric and marine corrosion. In natural finish>Lids incorporates a recessed oil resistant neo

prene gasket.>Wall mounting holes and lid fixing screws are

outside the sealing area thus preventing theingress of dust & moisture.

>Designed to meet IP65 of IEC529 andNEMA 4 specifications for dust & moisture.

>Internal guide slots for mounting PC boardsvertically

>Bosses on internal base allows fixing of PCboards horizontally or for connection of earthgrounding terminals, etc.

>Lid fixing screws are recessed captive screws,M4 stainless steel (non -magnetic)

>Screw holes for lid mounting are roll threaded.>Ground screw and washer provided are

copper-plated.

External Dimensions

276

Part No. L W HPB404 4.5” x 2.55” x 1.158”PB411 4.5” x 3.54” x 2.165”PB413 6.75” x 4.75” x 2.165”

External Dimensions

277

PROJECT CASES

Deluxe Molded Project BoxThis fine project box provides user with

professional finished product. The unitfeatures threaded brass inserts in top &bottom for security circuit board assem-blies. The case is secured together with 4screws and threaded brass inserts for nonstripping reuse. The front and back panesare removable for easy machining anddrilling. Case top and bottom are lightgrey. The front and back are dark grey.

Part No. L W HPB275 7-1/2” x 4.0” x 2-7/8”Removable front & back Dimensions 2-3/8” x 3-5/8”

Test Equipment & Instrument CasesThese deluxe instrument cases feature

separate front and back panels, inter-nal slots to hold PC boards in placeand internal mounting posts for secur-ing PC boards. Case has metal studsfor non stripping of screws holding thecase together. Front & back panels areplastic and are easily machined anddrilled. Case top are grey and front &back panels are black.

Part No. L W HPB200 8.0” x 6-1/4” x 2-1/2”PB250 10-1/8” x 7-3/8” x 3-3/8”

RUBBER BUMPERS & PLASTIC FEET

For use on chassis boxes and equipment cabinetsRubber feet/bumpers are self-adhesive and supplied

on a backing sheet. Application simply requires peeling indi-vidual foot from the backing and sticking it to your cabinet orchassis box. Soft rubber but will not leave marks on hardsurfaces.

Soft but firm, these three items make goodbumpers, feet for chassis boxes and spacers for PC boards.All are black in color and about 70 durometer hardness.

Tapered SquareRUBBER FOOT or BUMPERSelf adhesive and will stick well to a chassisbox. Semi-soft rubber will not easily leavemarks.Width at base: 0.50” Height: .237”

No. 10-610 12 pack

Dome ShapedRUBBER FOOT or BUMPERDome shaped, self adhesive foot. Peel off ofbacking and apply to any clean, smooth sur-face. Semi-soft rubber does not normally leavemarks.Diameter at base: .630” Height: .317”

No. 10-605 12 pack

Tapered CylinderRUBBER FOOT or BUMPERShaped like a tapered cylinder, self adhesiveand will stick well to a chassis box. May beused with a no. 8 wood screw or machinescrew, if necessary. Semi-soft rubber will noteasily leave marks.Diameter at base: .870” Height: .40”

No. 10-602 12 pack

Plastic Cabinet FeetMolded of durable, high-impact plastic. Generally used in sets offour on the bottoms of chassis boxes, equipment cases andcabinets. All are packaged four per display package and arealso available in bulk.

“Low Profile” PLASTIC FOOT

Semi-hard, molded plastic foot with justenough softness to improve durability andthat softens the sound and shock a bit. Mountwith a No.6 machine screw and nut or withwood screw. (not included)Diameter: .986” Height: .235”

No. 10-650 4 pack

“Tall” PLASTIC FOOT.

A standard style foot, tapered. Made of hard,high-impact plastic. Mount with no. 8 screw (not supplied).Color black.

No. 10-647 4 pack

Collet Mounting Plastic FootA clever design, the foot can be mounted on acabinet from the outside. Drill a 5/16” holeand place the foot into the hole. Then press aplastic pin (supplied) through the center of thefoot; the pin spreads the integral collets andthe foot is attached . Diameter: .775” Height: .388”

No. 10-644 4 pack

278

LONERSingle & Dual Temperature Controlled Solder Station

EDSYN No. ED-951SX-Better Tip Life-

This is EDSYN’S most popular station for both productionand the service bench. User-controlled temperature rangingfrom 400º to 800º F., regulation of +6º F. Solid state controlsand designed to avoid ESD problems. Employs a ceramicPTC element for fast heat up. A variety of soldering tips is available. The unique iron holder design reduces tip oxida-tion, wear during non-use periods and significantly reducesthe probability of user burns. This unit complies with MIL spec.45743E, DOD-STD-2000-1B, WS-6536E AND ESD Spec DOD-STD-1686,DOD-HDBK-263.Operation from 110 Volts, 60 Hz, 15W to 22 Watts. Heater rated @ 120V, 95W.Supplied with No. LT375 tip.

Solder Station No. 951SX order number ED-951SX.Replacement heater assembly for 951SX solder Station (not shown). Part No. ED-SR060

Power Requirements ......................120V, 60Hz205ºC-427ºC

Power Rating...................................15W-220W

Heater Rating...................................120V 95W

Dimensions...................4.1” W x 8.2” H x 10” D104mm x 208mm x 254mm

Temperature Range .......................400º F-800º F

Temperature Regulation ....................+6º F/ +3ºC

Tip-to-Ground VoltageLeakage/Resistance........................< 2 mV/ <2 Ω

Weight.............................................2.5 lbs / 1.1kg

Specifications for 951SX

LP200 SOLDAVAC SMD pick-up tool.The LP200 SOLDAVAC Lifter is a fountain-pen size tool that can pick up small SMDcomponents for moving and positioning them during either assembly or repair of circuitboards. Stops breakage that is common when using tweezers, contamination from fin-gers. Vacuum is formed with a simple squeeze and released just as easily. Threesizes of suction needle tips included. SOLDAVAC Pick-up tool, display packaged. No.ED-LP200

We are pleased to announce the addition of EDSYN, Inc. solder and desoldering equipmentto our product offering.EDSYN is a world-class manufacturer of soldering, desoldering and SMT (Surface MountTechnology) rework products and systems. Established in 1961, EDSYN invented the industry’s first patented desoldering hand tool known as SOLDAPULLT™. This spring-loadedhand held vacuum device launched an industry revolution in soldering and desoldering technology. Today EDSYN’s general product line includes a wide array of hand tools, stations, systems and accessories used in the assembly, rework, and repair of all types ofelectronic assemblies, particularly those that incorporate SMT (Surface Mount Technology).All of the EDSYN products are available through Philmore Manufacturing, some of whichinclude, but are not limited to:SOLDER STATION

SMT TOOLSDESOLDER S&A&'ONS

M(L &' &AS)'N* S&A&'ONS+(ME EX&RAC&'ON SYS&EMS

*A S PO,ERED SOLDER &OOLS

279

EDSYN SOLDAPULLT Products. Setting the Industry Standards for Solder Removal Tools.

SILVERSTAT SOLDAPULLT ESD-Safe, conductive plating, this unit designed for heavy duty solder removal, professional and production usage. Tip and O-ringare replaceable.Part No. ...........ED-AS196 display packaged.

Deluxe SOLDAPULLT is the original design solder removal tool. For use in heavy-duty, high-volume applications and specifically professional and productionusage. Tip and O-ring are replaceable.Part No. ...........ED-DS017 display packaged.

L=13” W= 3.5 oz.

L=13” W= 3.5 oz.

Low-Static Deluxe SOLDAPULLT is the original design but molded of conductive, static-dissipative materials. For profes-sional and production usage. Tip and O-ring are replaceable.Part No. ...........ED-DS017LS display packaged.

L=13” W= 3.5 oz.

PT109 SOLDAPULLT lll A smaller “petite” barrel and lighter weight for smaller hands. Weighs2.5 oz (1/3 less than standard models).Part No. ...........ED-PT109 packaged for display.Part No. ...........ED-PT209 (with a micro tip) Part No. ...........ED-PT309 (with 2” long tip)

L=12” W= 2.5 oz.

The Universal SOLDAPULLT delivers a powerful vacuum pulse, cocks (or loads) one handed.The loading stroke is adjustable to reduce hand strain.Part No. ...........ED-US140 packaged for display.

L=8” W= 2 oz.

Low-static Universal SOLDAPULLT Model No. US3440The above unit but molded of static conductive materials to bleed off static, prevent ESD when used by a person wearing awrist strap or similar grounding device.Part No. ...........ED-US340 packaged for display.

L=8” W= 2 oz.

The Challenger Standard Metric Low-static SOLDAPULLT EDSYN Model No. SS350A high-quality, low cost solder remover molded of static disappative materials. Features an .aluminum barrel for easy cleaning.Part No. ...........ED-SS350 packaged for display.Replacement Tip Part. No.ED-LS363

L=8.5” W= 1.5 oz.

Metric Tip Static Safe SOLDAPULLT lll Molded from conductive material, includes QG754 squee-gee tip. Retractableshaft for portability and easy storage .Part No. ...........ED-PT409MT packaged for display.Replacement Tip Part. No.ED-LS753

L=11.5” W= 2.0 oz.

Standard Metric EDSYN Model SS750LS SOLDAPULLT Another of the Challenger series of high quality, low cost units for desoldering basic electronics components. Suggested forthe hobbyist and low volume users. Just 8.5” in length and weighs only 1 1/2 ounces.Part No. ...........ED-SS750LS packaged for display.Replacement Tip Part. No.ED-SRT751

L=8.5” W= 1.5 oz.

280

Solder Station Tips for Model 951SX and others.

A wide variety of longer tips makes your EDSYN solder station more versatile, moreadaptable to changes as component shapes evolve. The LT375 tip is the standard,and included with the 951SX solder station. EDSYN soldering tips are machinedfrom pure copper and then processed in a series of plating and tinning operations tocreate more reliable, longer lived tips.

Spade Style Tips Conical Style Tips

Part No.

ED-LT375 Spade tip

ED-LT376 Spade tip

ED-LT431 Spade tip

ED-LT444 Spade tip

ED-LT374 Conical tip



width A

.06” (1.5mm)

.12” (3.0mm)

.07” (1.8mm)

.04” (1.0mm)

.03” (0.8mm)

.02” (0.5mm)

.01” (0.3mm)

width B

.55” (14.0mm)

.48” (12.2mm)

.74” (18.8mm)

.78” (19.8mm)

.48” (12.2mm)

.62” (15.8mm)

1.13” (1.13mm)

Tip drawing (not to scale)

Replacement PartsParts For 951SX Solder Station

Replacement heater assembly for 951SX Solder Station (not shown). Part No. ED-SR060Replacement Sponge for solder stations .......................(not shown). Part No. ED-RS199

Replacement tip for SOLDAPULLT

Replacement tip for the DS017, PT109 and theUS140

Replacement Tip............ Part No. ED-SRT12

Replacement Tip for the PT309Replacement Tip..............Part No. ED-LRT14

Static-Safe Replacement tip for SOLDAPULLT

Replacement tip for the DS017LS, AS196 andthe US340

Replacement Tip............ Part No. ED-LS197

EDSYN O-Ring Lubricant OL111.An occasional application oflube to the O-ring in solderremoval tools will expand thelife of the ring and maintainvigorous motion needed to“snap” the solder from PCboards.

O-Ring lube in 0.5 gm tube.......Part No. ED-OL111

Replacement “O” rings for SOLDAPULLT

Ring for model numbers AS196, DS017 and the US140,US340

Ring Part No. ED-ODS31.

Replacement ring for model numbers SS350, SS750LSetc...

Ring Part No. ED-OS130.

Replacement O-ring for PT109......Part No. ED-OSB32

281

Part No.

ED-FXF11

ED-FXF14

Descriptions

Standard Model

Economy Model

Base

1 pc.

1 pc.

Stand

2 pc.

1 pc.

Dimensions

5.5” W x 12” H x 5.5” D

3.8” W x 9.0” H x 3.8” D

Weight

1.09 lbs.

.92 lbs.

BENCH TOP FUME EXTRACTOR FANSA compact high efficiency two-stage charcoal impregnated filtration system that delivers optimum filtering capability at the fumesource.

Accessories For ED-FXF11 & ED-FXF14Part No. ED-XF03 Charcoal impregnated Stationary Filter (Set of 5)

Part. No. ED-XF02 Fuminator Primary Rotating Filter (Set of 5)

Part No. ED-XF01 Filter set (one each ED-XF03 and ED-XF02)

No. ED-XF03Set of 5

No. ED-XF02Set of 5

• Powerful 12V fan motor draws fume away from operator

• Ultra-Quiet operation• Rotating front filter provides filtration 8x

better than a stationary filter• Bright front (green) and rear (yellow) LED’s

to indicate power and air flow direction• Adjustable to almost any working angle• Quick filter replacement• Internal safety grills• Low static, ESD-safe• 2 stage filter

ADDITIONAL SOLDERING RELATED PRODUCTS

Page 212 - Precision tweezer’s & wire cutters.Page 219 - 220 Philmore soldering iron & soldering aids.Page 222 - Heatsink compound.Page 223 - Freeze spray & Flux remover.Page 224 - IC test leads & Jumper cables.Page 242 - PCB support & Track.Page 243 - Protoboards.Page 244 - Presensitized PCB & Copper clad PCB.Page 245 - Prototype PCB.Page 268 - 275 - Datak printed circuit accessories.Page 286 - 288 Qualitek soldering products.

282

LOCTITE® GLUES & ADHESIVES

DURO Quick GelSuper Glue

No run Quick Gel Super Glue. Works onwood, metal, rubber, plastics, vinyl, fabrics,and other such materials. The Gel worksbest on porous and vertical surfaces withsmall gaps. Bonds in 15 - 30 seconds.

LT- 81954 (2) .07 oz Tubes

DURO SUPER GLUE

America’s favorite traditional super glue.Super strong, bonds in seconds. It is perma-nent & clear. Bonds in 15 - 30 seconds.

LT-81742 (2) .07 oz Tubes

LOCTITE®

THREADLOCKERThese products lock and seal threadedparts against vibration loosening, corro-sion,and rust lock. They may also be usedas an anti-tamper indicator. They are avail-able in several grades and put ups.

RemovableMedium grade (Blue) # 242

LT-24200 .20 oz tube

LOCTITE QUICKTITE® SUPER GLUE

This super glue has proven superior performance over ordinary super glues. This works faster and holds stronger than othersthanks to a patented additive.

LT-21309Super Glue Liquid.18 oz (5g) Bottle

LT-26441Brush-on Liquid

.18 oz (5g) Bottle

LT-30379Super Glue Gel

.14 oz (4g)

LT-30622Super Glue Liquid

.14 oz (4g)

LT-82192Super Glue Pen.07 oz (2g) tube

LT-82196Super Glue Gel.07 oz (2g) tube

LOCTITE®

THREADLOCKERThese products lock and seal threaded parts against vibration loosening,corrosion,and rust lock. They may also be used as an anti-tamper indica-tor. They are available in several grades and put ups.

LT-27100.20 fl oz (6ml)

HIGH STRENGTH(RED) #271

LT-815011 oz Syringe

LT-81502(2) .5 fl oz tubes

LOCTITE®

QUICK SET EPOXYSuper high strength, waterproof, sets in 5 minutes, and is solvent resistant.Bonds to wood, metal, ceramic, glass, plastic & tile.

283

LOCTITE® GLUES & ADHESIVES

LOCTITE® SUPERFLEX RTV SEALER DURO CLEAR SILICONE SEALER

LT-30808CLEAR 3 fl oz (80 ml) tube

LT-80242CLEAR 1.5 oz tube

These general purpose RTV sealants are usable indoor and out. They seal,bond and secure on metal, glass, rubber, and vinyl. They cure at room temper-ature, and are safe on ELECTRICAL wiring.

LT-30806BLACK 3 fl oz (80 ml) tube

LT-30807BLUE 3 fl oz (80 ml) tube

This product provides permanent waterproof bonds for sealing andinsulating. It withstands heat, solvents, and vibration. It dries clear.

LOCTITE®

HANDYMANS CHOICELOCTITE®

SPRAY SILICONELOCTITE®

PLASTIX BONDERLOCTITE®

GLASS GLUE

LOCTITE®

STICK’ N SEALLOCTITE®

CONTACT CEMENTLOCTITE®

MIRROR ADHESIVE KIT

LT-30814 .01 oz Adhesive

.02 oz Primer

LT-815241.5 fl oz (44.3 ml)

LT-237821 fl oz (30ml)

LT-258272 fl oz (9ml)

LT-82565.10 oz Activator.07 oz Bonder

LT-3080910.25 oz

LT-29175.07 fl oz (2g) tube

This all purpose Non-Toxic adhesivesealant is strong, drys clear, waterresistant, microwave safe and odorfree. Use this product to mend brick,glassware, loose tiles & shoe soles.

This all purpose lubricant is great formany household uses. It will notstain or discolor. It provides an envi-ronmentally safe lubricant for locks,hinges, garage door openers, andmany other uses.

This advanced plastic repair kitrepairs any plastic---GUARANTEEDNO mixing required, just brush thesurface with the activator and applythe fast-acting bonding agent.Formulated for vinyl, plexiglass, phe-nolics, PVC, styrenes, acrylic, ABS &others.

This product works well on all glass.It bonds instantly and is dishwashersafe.

Use this two (2) part kit to attach mir-rors to glass, plastic, or metal. Greatfor attaching mirrors to windshields.

This tough fast drying cement isgreat for bonding or laminating card-board, ceramic tile, leather, and rub-ber. It is heat & water resistant.Requires no clamping.

This waterproof all purpose adhesivebonds all surfaces subjected to water& moisture. Seals leaks, repairstears, and secures tile. Great onbrick, aluminum, fiberglass, pool lin-ers, and rain slickers.

284

LOCTITE® / MANCO

Color DUCK TapeManco markets a wide range of colors which can be used to repair just

about anything including seats, luggage, bags, and books just to name a few.

Features:Professional Grade Duck TapeExcellent Adhesive, Conformability

Unwind and Tear features.9 Colors coordinating with most anythingMade in USA

ColorBeigeBlackBlueBrownGreenRedSilverWhiteYellow

2” X 5ydPart #

LT-CD-1BGLT-CD-1BLKLT-CD-1BLULT-CD-1BRNLT-CD-1GRNLT-CD-1REDLT-CD-1SILLT-CD-1WHTLT-CD-1YEL

X-Treme Duck TapeIt is not the same OLD DUCK TAPE anymore. These radically COOL

colors are “hot”. They are every bit as tough as traditional Duck Tape.

Features:Great for Repairs Crafts, ID MarkingHigh Visibility Easy Tear by Hand & WriteableExcellent Adhesive & Tensile Strength

1.88” X 4yd RollNo. LT-119745 YellowNo. LT-119747 Orange

1.88” X 3yd FlatNo. LT-119677 PinkNo. LT-119680 YellowNo. LT-119681 GreenNo. LT-119682 OrangeNo. LT-02970 Gray

200 mph Reflective Auto TapeThis special tape was first discovered by race car drivers who

used it on their vehicles and the tape would adhere to the cars atspeeds up to 200mph. It is reflective and is great on mailboxes,bikes, Autos, tree stakes and emergency kits. There are over1001 uses.

Features:Self AdhesiveIndoor or Outdoor UseUse at temperatures above 40o F

No. LT-07891 1.5” X 30” RED Roll(REPLACES LT-RF-1)No. LT-07892 1.5” X 30” WHITE Roll (REPLACES LT-RF-2)

DUCK TapeJust because it looks like Duck tape, feels like Duck tape and tears like

duct tape does not mean they all are the same. There are as many typesof DUCK tape as there are ducks. Manco manufactures several gradesdepending on usage.

Professional GradeNo. LT-S-10 2” X 10yd Flat

All-Purpose GradeNo. LT-B100 1.88” X 10yd RollNo. LT-B200 1.88” X 20yd RollNo. LT-B300 1.88” X 30yd RollNo. LT-B615 1.88” X 60yd Roll

Utility GradeNo. LT-DX-660 1.88” X 55yd Roll

Removable TypeNo. LT-03189 2” X 3yd Flat

Assorted Vinyl Electrical TapeThese assortments are convenient sizes for color cod-

ing electrical connections. They are available in twodifferent put-ups.

No. LT-5CP5 colors3/4” X 12’ ea

No. LT-072055 colors: Blue, Red, Green, Orange& White.1/2” X 20’ ea

QUICK-GRIP Hook and Loop FastenerThese products make it easy for the user to easily attach, remove, and reattach itemsaround the home, shop and office. They are made of woven nylon material coated with arubber-based adhesive system.

Features:Woven Nylon MaterialRubber-Based AdhesiveAdheres to a variety of clean,

dry, and smooth surfacesAvailable in Dots and StripesWhite Color

No. LT-01481 Stripes (1 set) 3/4” X 12”No. LT-01483 Dots (16) 5/8”

Adhesive RemoverThe only complete solution for adhesive and stick residue

removal. This product has a pleasant citrus scent and a built-inscraper top.

Features:Safe on all types of surfacesSponge Applicator for easy applicationConvenient built-in Scraper ToolRemoves all types of adhesive residue

Duct TapeMasking TapeCarpet TapeLabelsTarGumCaulk

Easy to handle bottle

No. LT-01560 5.45 fl.oz

2” x 5 YD Roll

285

LOCTITE® / MANCO

667 Pro Series Vinyl Electrical TapeThis is a complete line of professional grade Electrical Tape. It is designed for perform-

ance and value. Manco’s professional grade 667 series electrical tapes are UL and CSAapproved. They are available in eight (8) colors designed for electrical coding and splic-ing applications. These tapes have excellent stretch, adhesion and conformability andperform well in both indoor and outdoor applications.

Features:UL and CSA ListedFlame-Retardant7 mil VinylWeather-ResistantUp to 600 V ratingTemperature Range

-18o C to 105o C0o F to 221o F

Resists Abrasion, MoistureSolvents, & UV Rays

Convenient 3/4” X 66’ Size

Part #LT-04140 GreenLT-04141 WhiteLT-04142 YellowLT-04143 RedLT-04144 BlueLT-04145 OrangeLT-04147 GrayLT-04149 Black

No. LT-1219-60 3/4” X 60’

Economy Vinyl Electrical TapeThis electrical tape is designed to compete with

the imports, however, the stretch, adhesion andweather-resistant qualities are far superior. Theyare packaged in a sleeve of ten (10) rolls and

250 rolls to a master carton.

Double-Sided Mounting TapeThese Manco products are designed for semi-permanent

and removable applications. These products are availablein several put-ups.

No. LT-01528 3/4” X 10’ RemovableNo. LT-HU-1 1” X 60” RollNo. LT-HU15-6 3/4” X 15’ Roll

tyco / Adhesives Gaffer’s TapeThe leading roll on the set

This tape is used by professionals on stages, sets, and on location.This versatile low gloss tape has become indispensable for the artsand entertainment industry. Users appreciate the aesthetics of thematte finish, low residue, and easy tear. Some applications includewire hold down, stack blocking and spiking, audio-electric overheadlighting, set and stage decoration, film canister sealing, carpet hold-down, splicing, bookbinding, seat repair, graphics and design, andwaterproof packaging. We offer the tape in several of the most pop-ular colors. Meets Packard Electric 525-000 Specifications

Part Number Color12-5100 Black12-5108 Gray12-5109 White

2” X 60YD Roll

tyco Electrical TapeThis high grade electrical tape is made by Tyco Adhesives,and through an exclusive agreement we are able to offerthis quality tape at substantial savings over other nationallyknown brands of tape. The tape. is made in the U.S.A. andwe offer it in several popular colors.

Part Number12-821012-821212-821312-821412-821512-821612-821812-8219

ColorBlackRed

OrangeYellowGreenBlueGrayWhite

3/4” x 66’ Roll

tyco Duct TapeThis Polyken 203 Duct tape is an indispensable toolof the trade. We offer many colors for multipurposeuse. With these colors to choose from it is easierthan ever to pick the correct color for color coding,decoration, seat repair, carpet seaming, electrical pro-tection, and caution. Professionals choosethe best, tyco brand.

Part Number12-200012-200212-200412-200512-200612-2009

ColorBlackRed

YellowGreenBlueWhite

meets UL 7232” x 60YD Roll

QUALITEK SOLDERING PRODUCTS

QUALITEK WORLDWIDEEstablished in 1980, Qualitek International is the fastest growing manufacturer of soldering materials for the

Electronics assembly industry. Their rapid growth has been a result of their commitment to QUALITY, QUICKSERVICE, and state of the art TECHNICAL SUPPORT. Qualitek now has manufacturing facilities in Illinois,Singapore, the Philippines, China, Mexico, and the United Kingdom. Today Qualitek is a major supplier inthe International manufacturing market and is currently ranked in the top THREE (3) suppliers. They manufac-ture solder paste, soldering chemicals, wire solder, and bar solder for the Electronics Industry using all virginmaterials. LKG Industries is proud to be a Distributor of these Qualitek soldering products which we offer atsubstantial savings to the distributor and O.E.M. contract manufacturer. The following are the products that arecurrently available through your local Electronic Distributor.

Quality - Technology - Performance

Qualitek Rosin Core Wire SolderQualitek wire solder is made in the U.S.A. of virgin materials to maintain the highest and most consistent quality

Rosin Core (RA300) Solder

The RA300 (Rosin Activated) cored solder is one of the most universally used types of sol-der wire used in the electronics and electrical markets today. It has rapid wetting andspreading properties and leaves little residue which usually needs NO cleaning. LKGIndustries offers this solder in several gauges, several alloys, and both 1 LB and 1/2 LBspools

Part Number Alloy Size Dia. in. Percent Roll SizeTin / Lead Gauge of Flux

50-30023 60/40 23 .025 3.3 1 LB50-30523 60/40 23 .025 3.3 1/2 LB50-30021 60/40 21 .032 3.3 1 LB50-30521 60/40 21 .032 3.3 1/2 LB50-30018 60/40 18 .050 3.3 1 LB50-30518 60/40 18 .050 3.3 1/2 LB50-30016 60/40 16 .062 3.3 1 LB50-30516 60/40 16 .062 3.3 1/2 LB50-33021 63/37 21 .032 3.3 1 LB50-33521 63/37 21 .032 3.3 1/2 LB50-33016 63/37 16 .062 3.3 1 LB50-33516 63/37 16 .062 3.3 1/2 LB

QualityQualitek is an ISO 9002 certified company

All incoming raw materials are inspectedEvery manufacturing process is monitoredEvery item carries a lot # for tracking

TechnologyQualitek has developed a superior solder powder

technology that is virtually oxide-free.Qualitek solder paste manufacturing technology

consistently delivers high quality solder paste.Qualitek not only meets or exceeds Industry standards,

but excel in performance against competition.Performance

Qualitek’s application laboratory is equipped with the latest SMT assembly & wave solder equipment.

Qualitek’s application laboratory can build prototypesto suit customer needs.

Electronic Lead-Free Solder

Environmentally safe solder. This solder is designedto replace the standard lead barring type of solder forelectronic connections. The reflow temperature is 217o -219oC. The alloy is 95.5% Tin (Sn) / 4 % Silver (Ag) /.5% (Cu). This combination is the best for solderingelectronic connections while retarding the dissolution ofcopper. It has excellent wetting and spreading proper-ties. Philmore offers this solder with a No-Clean Flux

LF217 type

50-21750 1/2 LB Spool50-21700 Dispenser Pack21 Gauge (.032” DIA.)

286


Qualitek No-Clean Rosin Core Wire SolderQualitek wire solder is made in the U.S.A. of virgin materials to maintain the highest and most consistent quality

No-Clean (NC601) Rosin Activated Solder

Part Number Alloy Size Dia. in. Percent Roll SizeTin / Lead Gauge of Flux

50-60021 60/40 21 .032 1.1 1 LB50-60521 60/40 21 .032 1.1 1/2 LB50-63021 63/37 21 .032 1.1 1 LB50-63521 63/37 21 .032 1.1 1/2 LB50-63018 63/37 18 .050 1.1 1 LB50-63518 63/37 18 .050 1.1 1/2 LB50-63016 63/37 16 .062 1.1 1 LB50-63516 63/37 16 .062 1.1 1/2 LB

This special no-clean flux volatilizes (vaporizes) at soldering leaving minimal clear residue whichmay be removed with HOT water if desired.

Qualitek Silver SolderThese solders are specially formulated to be

used with gold and silver plated contacts toprevent the leaching of precious metals whichis easily dissolved into tin. Leaching is the ten-dency for tin/ lead-bearing solder to dissolvemetallizations during reflow operations. Therate at which silver leaches into molten tin/ leadsolder alloy is retarded by using solder alloyswhich contain a small amount of silver. Thesesolders contain 2% silver in the alloy.

Part Number Alloy Size Dia. in. Roll size FluxTin/Lead/Silver Gauge

50-32021 62/36/2 21 .032 1 LB RA30050-32521 62/36/2 21 .032 1/2 LB RA30050-62021 62/36/2 21 .032 1 LB NC60150-62521 62/36/2 21 .032 1/2 LB NC601RA300= Rosin Activated core, NC601 = No-Clean core

Qualitek Lead-Free SolderEnvironmentally safe solder. This solder is designed to

replace the standard lead barring type of solder for plumb-ing applications. The reflow temperature is 221o - 230oC.The alloy is 96.5% Tin (Sn) / 3.5 % Silver (Ag). This com-bination is the best for soldering plumbing or similar con-nections where excess heat will not destroy components. Ithas excellent wetting and spreading properties.

50-95505 1/2 LB Spool50-95500 Dispenser Pack16 Gauge (.062” DIA.)

Dispenser Packs of Wire SolderThese products are a convenient size to carry in your tool box or

keep in the rework bench. They are available in several alloys andtypes of products.

Part Number Alloy Dia. in. Roll size Carton FluxTin/Lead/Silver Quantity Type

50-3000 60/40 .032 .50oz 50 RA30050-6000 60/40 .032 .50oz 50 NC60150-6200 63/37/2 .032 .50oz 50 NC601

RA300= Rosin Activated core, NC601 = No-Clean core

Qualitek Bar SolderQualitek “Q-Bar” solder is made of thefinest virgin metals. The quality standardsfor ALL Q-Bar products exceed the J-STD-006, ASTM B-32 and QQ-S-571standards.They are available in 1 Kilogram (2.20pound) bars and are sold in ten (10) barpackages which weighs 22 LB.

Maximum Allowable ImpuritiesImpurity Q-Bar J-STD-006 ASTM B-32

0.0500.0100.0100.0500.0100.0100.0010.0010.0010.0050.0020.050

0.1200.0800.0150.2500.0200.0300.0050.0050.001n/an/an/a

0.2000.0800.0500.1000.0200.0300.0030.0050.0020.0100.0500.100

AntimonyCopperSilverBismuthIronArsenicZincAluminumCadmiumNickelGoldIndium

287

50-6322 Bar solder 2.2 LB / bar

50-6301 Q - Bar Chips1 oz chip (size 1” x .5”) for small solder pot.1/2 lb Package Blister Card Display


Qualitek Super DEOXThis product is spe-

cially formulated toconvert the oxides ofsolder (known asdross) that form onsolder in solder potsinto good solder. Useof Super Deox canreclaim over 80% ofdross into usable sol-der. This substantiallyreduces solder cost.

50-6304 Super Deox 4 oz. jar

Qualitek Ceasolder Solder Mask

Peelable Solder Mask

Ceasolder is a high temperature rubberlatex. It is used to temporarily mask metalsurfaces from molten solder during the sol-dering process. It can be applied directlyfrom the applicator bottle or by brush.

50-4212* Peelable Solder Mask 12 oz.*Special Order only--- 90 day shelf life

Qualitek Liquid FluxesLiquid Fluxes are formulated for general and specific applications. Qualitek offers a large variety of fluxes for the production industry. There are rosin

based fluxes, Alcohol Based fluxes, and Water Soluble Fluxes as well. Liquid fluxes can be applied by brush, automation or spray depending upon therequirements. Philmore is offering two of the most popular types in several put ups.

Rosin Based

50-28502 2 oz50-28532 32oz50-28501 1 Gal

Water Soluble

50-73702 2oz50-73732 32oz50-73701 1 Gal

No-Clean

50-30202 2oz50-30232 32oz50-30201 1 Gal

RMA Flux

Rosin Based Flux Mildly Activated, clean with solvent

No- Clean Flux

No Rosin, Low Solids, needs NO Cleaning, Good wetting

Water-Soluble Flux

Highly Active, MUST CLEAN RESIDUE, Distilled Water

Qualitek Rework-WandsThe Qualitek rework-wand is

a unique tool for rework andtouch-up soldering. It allows acontrolled application of flux,eliminating the mess from fluxbottles. Rework wands are ideally suited for SMT rework, TAB assembly operations, andcomponent applications. There are three formulas available, R.M.A. (rosin mildly active),Water-soluble, No-clean.

Part Number Description Carton QTY50-30233 #302 Low Solids No-Clean50-28533 #285 “RMA” <25% Solids50-73733 #737N Neutral PH Water Soluble

LKG Acid & Cleaning BrushesThese brushes have a thousand uses. You may use them for

applying flux, remove foreign material from the surface, or to cleanparts.

50-5405 5 Pack50-5400 Bulk Pack

Qualitek Paste FluxFluxes are intended to

be used to reduce solderballing, and bridging. Theproper flux allows forproper solder flow andincreased wetting ofdesired areas. Qualitekoffers several differenttypes of fluxes includingWater Soluble Fluxes,and Rosin Fluxes toname only a few.Philmore is offering themost popular paste flux intwo sizes.

50-4002 2 oz container50-4016 16 oz container

Delta Tip Tinner by QualitekThis flux is designed to tin soldering Iron tips. This makes the tips last

longer and conduct a more even heat. Philmore offers this in the most pop-ular alloy in a convenient container with mounting tape.

50-63371 1 oz tin 63/37 alloy

202020

288

VALUE BOX

• Self contained POP display• Items Most used by Consumers - Quick Inventory Turns• Attractive Profit Margins

No. 82-130 - Two-Way Video Splitter - 100 PiecesNo. 82-147 - Three-Way Video Splitter - 70 PiecesNo. 82-162 - Contractors Jack Pack (Ivory)

(20) No. TEC30B (26) No. TWP49B (16) No. TWP55BNo. 82-262 - Contractors Jack Pack (White)

(20) No. TEC30VB (26) No. TWP49VB (16) No. TWP55VBNo. 82-308 - Modular Surface Mount Telephone Jack (Ivory)- 80 PiecesNo. 82-365 - 6 ft. Stereo Dubbing Cable - 50 PiecesNo. 82-415 - TV/FM/Video Wall Plate (Ivory) - 50 PiecesNo. 82-425 - TV/FM/Video Wall Plate (White) - 50 PiecesNo. 82-435 - TV/FM/Video Wall Plate (Brown) - 50 PiecesNo. 82-495 - Telephone Wall Plate (Ivory) - 50 PiecesNo. 82-505 - Telephone Wall Plate (White) - 50 PiecesNo. 82-555 - Telephone Wall Mount Plate (Ivory) - 50 PiecesNo. 82-664 - 6 ft. Video Cable - 50 Pieces

Philmore ManufacturingAn LKG Industries Company - Rockford, IL 61125 USA

289

philmore pg.273-289 catalog

Documents