philmore pg. 49-64 catalog
DESCRIPTION
Philmore pg. 49-64 CatalogTRANSCRIPT
BNC ADAPTORS
SMA Male to BNC Male
No. 11330
BNC Female to 1/8”PhonePlug
No. 963
BNC Female to UHF Female
No. 962
BNC Female to UHF Male
No. 950NP
BNC Male to UHF Female
No. 951NP
BNC Male to RCA Female
No. 955
BNC Male to “F” Female
No. 960
BNC Female to “F” Female
No. 978
Motorola Female to BNC Male
No. 947
N Male to BNC Female
No. 724
Mini UHF Female to BNC Male
No. 588
Mini UHF Male to BNC Female
No. 590
TNC Male to BNC Female
No. 876
BNC Female to RCA Male
No. 957
BNC Female to “F” Male
No. 958
BNC Female to “F” Push-onMale
No. 966
SMA Male to BNC Female
No. 11335
SMA Female to BNC Male
No. 11340
SMA Female to BNC Female
No. 11350
BNC Male to DUALBANANA PLUGS
• Standard .750”center to centerBanana plugs spacing• .161” holes in bodyfor side stacking
No. 2380
BNC Female to DUALBANANA PLUGS
• Standard .750”center to centerBanana plugs spacing• .161” holes in bodyfor side stacking
No. 2382
BNC Female to DUALBINDING POST
• Standard .750”center to center Bananaplugs spacing• .161” holes in body for sidestacking
No. 2392
BNC Male to DUALBINDING POST
• Standard .750”center to centerBanana plugs spac-ing• .161” holes in bodyfor side stacking
No. 2390
Note: Unless otherwise stated,Adaptors are nickel plated with DelrinInsulators.
NOTE: All connectors on this page are available in bulk. Add “B” to part no. when ordering. 49
TWINAX / N TYPE CONNECTORS & ADAPTORS
50
DUAL FEMALE ADAPTORDual Female AdaptorEquivalent to Amphenol 82-5588 and IBM 7362230No. 611
MALE N CONNECTORSMALE N CONNECTOR
Clamp type with solder pin.
TNC MALE to N FEMALEADAPTOR
No. 885
N RIGHT ANGLE MALE toFEMALEMil Equiv. UG-27B
No. 715
N RIGHT ANGLE MALE toMALE
No. 716
N MALE to F FEMALEADAPTOR
No. 717
N DUAL MALE ADAPTORMil Equiv. UG-57B
No. 714
N FEMALE IN-LINE CONNECTORClamp-Type,Solderless
N FEMALE Chassis MountMil Equiv. UG-58
No. 713
N DUAL FEMALE ADAPTORMil Equiv. UG-29
No. 712
N TYPE CONNECTORS AND ADAPTORSSPECIFICATIONS:
Impedance: 50 ohmsFrequency Range: 0-11GHzVoltage Rating: 1500V PEAKVswr: 1.3Max
0.11GHz
TWINAX FEMALE CONNECTORS CHASSISSolder Terminals w/ mounting HardwareEquivalent to Amphenol 82-5646 and IBM 7364498No. 612
TWINAX FEMALE INLINE Connectors
No. 613
TWINAX DUAL FEMALEChassis Mount
No. 614
TWINAX “T” ADAPTOR 3 Females
No. 615
TWINAX “T” ADAPTOR Male to 2 Females
No. 617
Cable Type
RG58/U
RG8/U
Mil equiv.
UG-536B
UG-21B
Part Number
708
709
Mil. equiv.
N/A
UG-23
Part Number
710
711
Cable Type
RG58/U
RG8/U
TWINAX CONNECTORSMale for IBM cabletype 7362211, Belden8227 & 9207.Equal to AmphenolNo. 82-5589 and IBM736229.
No. 610 - Male ConnectorNo. 610B PIN - Extra Center PinsNo. 609 - Male Crimp Type w/cover
TWINAX CONNECTORS Note: Unless otherwise stated, all items are Nickel Plated Brass with Delrin Insulators.
NOTE: All connectors on this page are available in bulk. Add “B” to part no. when ordering.
N FEMALE to F MALEADAPTOR
No. 718
51
N TYPE / TNC CONNECTORS & ADAPTORS
Note: Unless otherwise stated, all itemsare Nickel Plated Brass with DelrinInsulators
TNC MALE TWIST-ON SolderlessConnector
Bulkhead Female Chassis Mount
No. 852D
Bulkhead Dual Female Splice
No. 870D
Right Angle Adaptor,Male to Female
No. 853D
TNC Male to BNC Female No. 876
TNC Male to UHF Female
No. 878
TNC Female to SMA Male
No. 880
TNC Female to UHF Male
No. 882
TNC Male to SMA Female
No. 884
Mini UHF Male to TNC Female
No. 574
Mini UHF Female to TNC Male
No. 582
TNC MALE CONNECTOR,Two Piece Crimp
THREE PIECE CRIMP-ON
TNC FEMALE to Push-onTNC MALE ADAPTOR
DUAL FEMALE ADAPTOR
UHF FEMALE to N MALEADAPTOR
No. 719
N FEMALE to UHF MALEADAPTOR
No. 720
N MALE to BNC FEMALEADAPTOR
No. 724
No. 860D - RG59/62No. 861D - RG58/UNo. 859D - RG58/U - Black FinishNo. 862D - RG58/AUNo. 863D - RG59/62 - TeflonNo. 867D - RG58/U - Push-on typeNo. 871D - RG174, 179, 187, 188 & 316
No. 868D
No. 875D
SMA MALE to N MALE ADAPTOR
No. 11320
SMA FEMALE to N MALE ADAPTOR
No. 11355
SMA MALE to N FEMALE ADAPTOR
No. 11360
N TYPE COAXIAL ADAPTORS
TWIST-ON SOLDERLESS CONNECTOR
TNC COAXIAL CONNECTORSThese weatherproof connectors stand up under severe vibration. 50 ohm impedance.Nickel plated brass with delrin insulators.
Part Number
865D
872D
Wire Type
RG59/U&RG62/U
RG58/U
Part Number
873D
874D
Wire Type
RG59/U&RG62/U
RG58/U
NOTE: All connectors on this page are available bulk. Add “B” to part no. when ordering.
UHF CONNECTORS & ADAPTORS
52
Note: Unless otherwise stated, all itemsare Nickel Plated Brass with DelrinInsulators
UHF MALE CONNECTORTwo-Piece crimp-on.
No. 562A - RG59/U CableNo. 564A - RG58/U Cable
Type PL-259 MALEUHF CONNEC-TORFor use with the following cables: RG8, 9, 10, 11, 12 and13/U. For other cables, use with adap-tors No. UG-175/U and No. UG176/Ulisted below.No. PL259
REDUCER Adaptor for PL-259Adapts No. PL259 for use with small-er I.D. cables.
UHF Chassis MountFEMALE TypeS0239
No. SO239Mounts in 5/8” dia. hole, screw holesare on 23/32” mounting centers.
UHF ChassisMount FEMALE
No. 563ABushing mount withnut and washer.
UHF Right Angle AdaptorMale to Female
No. 551A
UHF “T” Adaptor 1 Male to 2 Female
No. 552ATNC Male to UHF Female
No. 878
TNC Female to UHF Male
No. 882
UHF Female to N Male
No. 719
N Female to UHF Male
No. 720
BNC Female to UHFFemale
No. 962
“F” Female to UHF Male
No. FC71
UHF Female to “F” Male
No. FC68
SMA Male to UHF Male
No. 11325
SMA Female to UHFMale
No. 11345
UHF “T” Adaptor 3 Female
No. 554A
UHF Male to Phono JackAdaptor
No. 557A
UHF Dual Female Adaptor Chassis or In-Line
No. 555A
Length: 2”. Installs bulkheads up to 1-1/4”thick. Mounts in 5/8” hole. Continuouslythreaded and supplied with two nuts.
UHF Dual Female Adaptor In-Line Type PL-258
No. 553A
SMA Male to UHF Female
No. 11370
UHF Female to Motorola / RCAMale Adaptors
No. 550A
Motorola Type plugwill mate with eithera Motorola jack orRCA phono jack.
Part Number
UG175/U
UG176/U
Wire Type
RG29, 55&RG58/U
RG17, 59, 62& RG63/U
NOTE: All connectors on this page are available bulk. Add “B” to part no. when ordering.
UHF ADAPTORS
Mini UHF Male Crimp-on Black Finishfor RG58/U cable
No. 567
MINI UHF / SMA CONNECTORS & ADAPTORS
Crimp-on Male Connectorfor RG58/U cable
No. 566
Mini UHF Female to BNC Male
No. 588
Mini UHF Male to BNC Female
No. 590
SMA MaleStandard type
No. 11000 - 58A/U-141No. 11001 - 59, 62, 210No. 11002 - 174, 188, 316
SMA Female Crimp Type
No. 11200 - 58A/U-141No. 11201 - 59, 62, 210No. 11202 - 174, 188, 316
TNC Female/SMA Male
No. 880
TNC Male SMAFemale
No. 884
Double Male SMA
No. 11300
Double Female SMA
No. 11305
T-2 Female - 1 Male SMA
No. 11310
SMA Dual Chassis Mount
No. 11315
SMA Male to UHF Male
No. 11325
SMA Male to BNC Male
No. 11330
SMA Male to BNC Female
No. 11335
SMA Female to BNC Male
No. 11340
SMA Female to UHF Male
No. 11345
SMA Female to BNC Female
No. 11350
SMA Female to N Male
No. 11355
SMA Male to N Female
No. 11360
SMA Male to N Male
No. 11320
Mini UHF Female Crimp-on for RG58/U cable
No. 568
Mini UHF Double Female
No. 572
Mini UHF Male to TNC Female
No. 574
Mini UHF Right Angle Femaleto Male
No. 576
Mini UHF 3 Female
No. 578
Mini UHF Femaleto TNC Male
No. 582
Mini UHF Female to UHF Male
No. 584
Mini UHF Male toUHF Female
No. 586
Note: Unless otherwise stated, all items are Nickel Plated Brass with Delrin Insulators.
Note: All connectors on this page available in bulk - add (B) suffix when ordering.
SMA
MINI UHF
Mini UHF Chassis Mount Female
No. 580
SMA Male Crimp Type
No. 11100 - 58A/U-141No. 11101 - 59, 62, 210No. 11102 - 174, 188, 316
53
MULTI - PIN MOBILE CONNECTORS
54 NOTE: All connectors on this page are available bulk. Add “B” to part no. when ordering.
Multipin Mobile Connectors
Although these connectors are generically identified as microphone connec-tors, they are used in a wide variety of applications which require reliable,economical multi-pin connections, particularly for rugged mobile use. Thepositive screw-on retaining ring, & built-in strain relief, provide reliable con-tact under extremes of shock and vibration.
The complete line of mobile connectors is manufactured in Japan. Design,structure and fit reflect the care and precision of which the Japanese arecapable. Metal gauges, alloys and plating have been selected to meet theneeds of a mobile environment.
To augment the premium line of mobile connectors, we have selected alower cost source in Taiwan. Although somewhat different in structure thanthe Japanese versions, the “61” series from Taiwan provides analternative...reliable well-designed connectors at significantly lower cost.
CORD MOUNTING RIGHTANGLE FEMALE
SCREW-ON CAP
No. PCP2Protective closurecap for chassissocket. 3 1/2” chainwith eyelet clip forscrew mounting.
IN-LINE FEMALE
1-7/16” X 1/2” D, 23/32” D Ret. Ring
MALECHASSISSOCKET
Mounting Hole is 5/8” D
IN-LINE MALE
1-11/16” x 23/32” D
PREMIUM Made in JapanIn-Line FemaleMale Chassis SocketIn-Line Male
ECONOMYMade in TaiwanIn-Line FemaleMale Chassis SocketIn-Line Male
61-60261-62261-632
61-60361-62361-633
61-60461-62461-634
61-60561-62561-635
61-60661-62661-636
61-60761-62761-637
61-60861-62861-638
T-Series L-Series P-Series
Dielectric AC 1 Min
Insulation ResistanceDC 500VOver 100M ohm
Contact ResistanceBelow 5m ohmat DC 1A
T602CP602CL602C
T607CP605CL607C
T609CP606CL606C
T616CP616CL616C
T707P707L707
T700P700L700
T612CP612CL505C
No. T602RA 2 PINNo. T609RA 4 PINNo. T700RA 8 PIN
2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 PIN
Hardwares: No. TLS-SCREW (Body setscrew), No. TLC-SCREW (Cable clamp screw), No. TL-CLAMP (cable clamp)
55
DIN / MINI DIN CONNECTORS
Originally a European Audio Connector design, these DIN Connectors have found acceptance in computer and other electronicconnector applications. A combination of reliability and economy has prompted their widespread adoption. Philmore DINConnectors are now offered in two series. The original “E” series is of Japanese origin...a factory with a world-wide reputationfor quality. The new “ET” series is a lower cost product from Taiwan, also carefully selected to meet exacting Philmore qualifi-cation and incoming inspection standards.
E SERIES - JAPANThe “E” Series, color: light beige, from Japan is designed to meet exacting manufacturing requirements....ease of assembly andlong-term physical and electrical reliability...particularly when subject to frequent connect-disconnect and/or movement. Some ofthe particular design features:
EA AND EL --Heavier gauge metal & thicker platingon terminals and structure. Better solderability. Terminal numbers moldedinto insulator.
EA-Shield clamp integral in structure.Superior finish on pins providethousands of additional reliableconnections. Plastic handledesigned to cover the retentionmechanism, leaving no exposedmetal. Molded-in key facilitatesassembly alignment.
EL-Ground springs are well-formed spring brass with minimaltendency to fatigue and longer firm retention. Superior fit ofshells makes assembly quicker and easier. A more rigid shellprovides greater protection of terminal connections.
In-Line Male Chassis Female In-Line Female
In-Line Male Chassis Female In-Line Female
ET SERIES - TAIWANThe new “ET” Series, Color: Black, from Taiwan provide a fully satisfactory lower cost alternative for many DIN connector applications. The basic design and quality ofproduction assure serviceable performance, and our own QC overview adds to that assurance.
NOTE: Part numbers as shown are display-packaged-Add (B) suffix for bulk packaging.
Fig. A3 PINEA1ES1EL1
Fig. B4 PINEA5ES5EL5
Fig. C5 PINEA2ES2EL2
Fig. D5 PINEA3ES3EL3
Fig. E5 PINEA4ES4EL4
Fig. F6 PINEA9ES9EL9
Fig. G7 PINEA10ES10EL10
Fig. H8 PINEA11ES11EL11
Fig. AETA1ETS1ETL1
Fig. CETA2ETS2ETL2
Fig. DETA3ETS3ETL3
Fig. EETA4ETS4ETL4
Fig. FETA9ETS9ETL9
Fig. GETA10ETS10ETL10
Fig. HETA11ETS11ETL11
Fig. IETA13
ETL13
MINIATURE DIN CONNECTORSThese miniature din connectors (9 mm. diametercontact face) are in-line with standard contactconfiguration for the type. These fine qualityproducts are ideal for a variety of multi-pin appli-cations requiring reliable contact in confinedspace. Full specifications available upon request.
NOTE: Part numbers as shown are display-packaged-Add (B) suffix for bulk packaging.
CHASSISMOUNT
No.of Pins
3456789
MalePart No.
EMA3EMA4EMA5EMA6EMA7EMA8EMA9
FemalePart No.
EML3EML4EML5EML6EML7EML8EML9
FemalePart No.
EMS3EMS4EMS5EMS6EMS7EMS8EMS9
Mini-Din AdaptorsThese mini-din adaptors are designed toallow you to couple two similar cables inorder to extend the length. Philmore offersthese items in several configurations foruse with Computers, Audio Equipment, Video Equipment, etc.
No. 70-346 MD3 (F) / (F)No. VHS4 MD4 (F) / (F)No. 70-348 MD6 (F) / (F)No. 70-344 MD8 (F) / (F)
CHASSISMOUNT
FEMALE MALE
Fig. BETA5ETS5ETL5
RCA TYPE (PHONO) CONNECTORS
PHONO PLUG MALE RCA type
Gold plated on contacts and solder terminals;body and shell molded plastic; integral strainrelief. Available in red or black.No. MSG16 - display pkg, 1 red & blackNo. MSG16B-RD - bulk packed, redNo. MSG16B-BL- bulk packed, black
PHONO PLUG MALE RCA type
PHONO PLUGS Male RCA type
Solder terminals; body andshell molded plastic. Available in several colors.
No. MS14 - display packaged, 2 each red,black, No. MS144 - display packaged, 2 each red,
black, green, yellowNo. MS14B-RED - bulk packed, redNo. MS14B-BLK - bulk packed, black.No. MS14B-GRN - bulk packed, greenNo. MS14B-YEL - bulk packed, yellow
AUDIO/VIDEO GRADEPHONO PLUG RCA MALE, fully shield-ed. Twist-on, solderlessconnection. Gold platedfor best audio and video performance. Usewith either RG58 or RG59 coaxial cable.No. MDL2 - package one connectorNo. MDL2B - bulk pack
GOLD RG59/U RCA PLUGA perfect connector for use with RG59 cable invideo or audio systems; high tech look too. Noise-free, dependable connections. Availablewith either black or red color band on gold body. No. 2101DL - package one black onlyNo. 2102DL - package one each red & blackNo. 2101DLB-BL - bulk packaged blackNo. 2101DLB-RD - bulk packaged red
GOLD platedRCA PLUGSolder type with spring strain relief. A quality general purpose audio connector, gold plated for performance. Color bands on body identify leftand right channels. Use with most audio wires.No. MSG10 - disp. package 1 red & 1 blackNo. MSG10B-BL - bulk packed, black No. MSG10B-RD - bulk packed, red
Shielded RCA type PHONO PLUGA tough, nickel-platedconnector for generalpurpose audio usage. Solder lugs connec-tion. No. MS10 - five connectors in display
packageNo. MS10B - connector bulk packaged
Shielded RCA typePHONO JACKDurable, nickel-plated con-nector for general purpose audio usage. Solder lugs connection.
No. MS9 - five connectors in display package
No. MS9B - connector bulk packaged
RCA or PHONO PLUGNickel plated crimptype with 1/4”crimping ring forRG59/U cable.
No. 2101A - display packagedNo. 2101AB - phono plug bulk packaged only
PHONO PLUG
A standard, very low cost;phono plug.
No. 2101P - phono plug, bulk packaged only
No. 70-013 - grey handle, display pkg. of 2No. 70-013B - bulk packed
Solder terminals; body and shell moldedplastic; integral strain relief. Handles avail-able in six colors.No. MS16 - display pkg, 2 red & 2 blackNo. MS16B RED - bulk packed, redNo. MS16B BLK- bulk packed, black
No. MS16B YEL - Bulk Packed, YellowNo. MS16B WHT - Bulk Packed, WHITENo. MS16B BLU - bulk packed, blue No. MS16B GRN - bulk packed, green No. MS161 - display package,
1 red & 1 white for audio No. MS162 - display package,
1 each of red, white, yellow for A/V
No. MS163 - display package, 1 each of red, green, blue for component video
56
SHIELDED PHONO PLUGSMALE RCA TYPE
Fully shielded RCA plugfor Audio & Video,Nickel plated body withcolor coded band &strain relief (maximumcable O.D. 4.0mm).Knurled handle for asecured grip. Available in 4 colors.
No. 70-132 - display package, 1 red & 1 black
No. 70-130B - bulk packed, blackNo. 70-134B - bulk packed, redNo. 70-136B - bulk packed, whiteNo. 70-138B - bulk packed, yellow No. 70-135 - display package,
1 red & 1 whiteNo. 70-137 - display package, 1 red,
1 white & 1 yellow
SHIELDED PHONO JACKSFEMALE RCA TYPE
Fully shielded RCA jack forAudio & Video, Nickel plat-ed body with color codedband & strain relief (maxi-mum cable O.D. 4.0mm).Knurled handle for asecured grip. Available in 4colors.
No. 70-221 - display package, 1 red & 1 black
No. 70-220B - bulk packed, blackNo. 70-224B - bulk packed, redNo. 70-226B - bulk packed, whiteNo. 70-228B - bulk packed, yellow No. 70-225 - display package, 1 red
& 1 whiteNo. 70-227 - display package, 1 red,
1 white & 1 yellowRIGHT ANGLE PHONO MALE RCA TYPE:Solder terminal, integral strain relief forcable up to 4.0 mm O.D. available in fourcolors.
Right Angle PlugsNo. 70-036B - BlackNo. 70-030B - RedNo. 70-032B - WhiteNo. 70-034B - YellowNOTE: Bulk pack only
CHASSIS MOUNT RCA JACKSTraditionally used in audio applications, the RCAconnector is often used for videoand low voltage power as well.This series is made to be mount-ed in panel or chassis. Colorcoded insulators for left or right channel, video etc..Connector surfaces are nickel plated brass, solderlug surfaces are tinned.The insulator material isblack plastic.
No. MS30 - single jack, white insulatorNo. MS35 - dual jacks, red & white insulatorsNo. MS45 - triple jacks, red, white
& yellow insulators No. MS40 - four (quad) jacks, white,
red, white, red insulators
Note: For mounting, dimensioned draw-ings are available via facsimile from
Philmore.* For bulk, add suffix letter “B” to Part No.
RCA FEMALEADAPTOR, orCouplerPhono jacks on both ends, for mating cables with RCAmales. No. SAG13 - gold platedNo. SAG13B - gold plated, bulk packagedNo. 45-311G - shielded, Gold platedNo. SA13 - nickel platedNo. SA13B - nickel plated, bulk packagedNo. SAG23 - 2 RCA-2 RCA, gold platedNo. SAG23B - bulk packagedNo. 45-333G - 3 RCA-3 RCA, gold platedNo. 45-333GB - bulk packaged
GOLD-PLATED, TEFLON INSULATOR RCA JACKPanel mounting phono jack is gold plat-ed and designed to be electricallysuperior as well as very durable; this isour best jack. Color bands for channelidentification. Ground lug and nut alsogold plated. Bushing measures 5/16” diameter with 9/32 across a flat.
No. MTG12 - display pack 1 red & 1 black
No. MTG12B-BL - bulk packed blackNo. MTG12B-RD - bulk packed red
RCA or PHONO JACKAn industry standard and popular style jack that mounts in a 1/4” dia. hole; upto 3/16”panel thickness. Mounting hardware is includ-ed. No. MS12 - nickel plated, pack of fiveNo. MS12B RED - nickel plated,
bulk pack redNo. MS12B BLK - nickel plated,
bulk pack blackNo. MS12B WHT - nickel plated,
bulk pack whiteNo. MS12B YEL - nickel plated,
bulk pack YellowNo. MSG12 - gold plated, pack of 2No. MSG12B RD - gold plated,
bulk pack redNo. MSG12B BL - gold plated,
bulk pack blackNo. 45-270B WH - gold plated,
bulk pack whiteNo. 45-270B YE - gold plated,
bulk pack yellowNo. 45-270B BL - gold plated,
bulk pack blueNo. 45-270B GR - gold plated,
bulk pack greenNo. 45-270B OR - gold plated,
bulk pack orangeNo. 45-270B BK - gold plated,
bulk pack blackNo. 45-270B RD - gold plated,
bulk pack red
PHONO JACKS Female RCA typeSolder terminals; body andshell molded plastic; inte-gral strain relief. Availablein red or black.
No. MS17 - display pkg, 1 red & 1 blackNo. MS17B RED - bulk packed, redNo. MS17B BLK - bulk packed, black No. MS17B YEL - bulk packed, yellow No. MS17B WHT - bulk packed, white No. MS17B BLU - bulk packed, blue No. MS17B GRN - bulk packed, green No. MS171 - display package,
1 red & 1 white for audio No. MS172 - display package,
1 each of red, white, yellowfor A/V
No. MS173 - display package, 1 each of red, green, blue for component video
No. 70-022 - grey handle, display pkg. of 2No. 70-022B - bulk packed
PHONO JACKSFemale RCA typeSolder terminals; body andshell molded plastic; Availablein red or black.
No. MS15 - display pkg, 1 red & 1 blackNo. MS15B-RED - bulk packed, redNo. MS15B-BLK - bulk packed, black
PC MOUNT RCA JACK
Printed Circuit boardmounting. A durable part,nylon body and nickelplated contacts. Themounting design affords considerable strain relief to protect PC board.
No. MS11 - single jack,package of five
No. MS13 - dual jack, Package of one
No. MS19 - triple jack, Package of one
* For bulk, add suffix letter “B” to Part No.
REAR MOUNTRCA JACKMounts in a 3/8” mountinghole into panels up to3/16” thick.No. MS22 - Display packaged of oneNo. MS22B - Bulk packed 57
RCA TYPE (PHONO) CONNECTORS
GOLD PLATEDISOLATED RCA JACKPanel mountingphono jack is gold plated, mounts in a3/8” dia. hole (shoulder washers includ-ed). Color bands for channel identifica-tion. Ground lug and nut are also Goldplated. Bushing measures 5/16”.
No. 45-108G - display pack, 1 red & 1 black
No. 45-128G - display pack, 1 red & 1 white
No. 45-138G - display pack, 1 red, 1 white & 1 yellow
No. 45-148G - display pack,2 yellow
No. 45-108GB BL - bulk packed, black
No. 45-108GB RD - bulk packed, red
No. 45-108GB WH - bulk packed, white
No. 45-108GB YE - bulk packed, yellow
RCA FEMALE,BULKHEADIsolated RCA to RCA feedthru jacks for audio & video.Mounts in a 3/8” (.375”) Mtg. hole.Colored insulation.No. 45-162G - Gold plated. Package of 3
(1 red, 1 white & 1 yellow)No. 42-362 - Nickel plated. Package of 3
(1 red, 1 white & 1 yellow)
MONO 1/4” PHONE PLUG SCREW TERMINALTwo conductorphone plug, screwterminals for solder-less connections,and cable clampstrain relief. May also be used as solder type.
No. 527-BLK - packaged, blackNo. 527-RED - packaged, red
PHONE PLUGS & JACKS
58
1/4” (6.3mm) MONO PHONEPLUGS
DELUXE COLOR CODED PHONE PLUGS2 conductor, all-metal 1/4” plug set, colorcoded in 5 colors: Red, Black, Yellow, Blueand Grey. A knurled braided grip, SolderTerminal.No. 520K - one each of 5 colors, packaged
1/4” SOLDER TYPE PLUGSolder lug typewith cableclamp terminal.Supplied withred or blackplastic handle. All parts nickel-plated. Fits allstandard 1/4” jacks.
No. S623-BLK - bulk packaged only, blackNo. S623-RED - bulk packaged only, red
No. S624 - bulk packaged only, shielded, all metal
2 CONDUCTOR JACK - INLINE
Two conductor solderterminal jack 2”long.7/16 dia.,black plastic handle.
No. 519 - display packaged
1/4” SHIELDED JACK - INLINE
Shielded metal handle - Mono 1-1/2” x 9/16” dia.
No. 519M - display packaged
1/4” PHONE JACK - MONOISOLATED (Plastic Bushing)2 conductor, open circuitisolated from panel.
No. 2280P - display packagedNo. 2280 - bulk packaged
1/4” STEREO PHONE PLUG
Supplied with a black handle. All parts nick-el-plated. Fits all standard type 1/4” jacks.Solder type strain relief.No. 524W - display packaged
1/4” STEREO PHONE PLUG -SHIELDED
Solder type phone plug has shielded nickel-plated barrel.No. 524WS - display packaged
.206” DIAMETER 3 CONDUCTORPHONE PLUG“Aircraft microphone”type plug.No. 524WTP - Display packaged NEWNo. 524WT - bulk pack only, black plas-tic handle, Solder lug connections.No. 524JTP - Display packaged NEWNo. 524JT - bulk pack only, mating chassis mount jack.No. 521JT- bulk pack only, matingin-line jack.No. 521JTP - Display packaged NEW
1/4” STEREO 3 CONDUCTORINLINE JACKThree conductordual open circuitjack with solder ter-minals. Has metal internal shield. Overallsize: 2” - Diameter: 7/16”
No. 521S - black
1/4” CHASSIS MOUNT JACKS - MONOCompact size. Mounts in 3/8”dia. hole in panels up to 5/32”thick. Mounting hardwareincluded.
No. 2283JP - display packagedNo. 2283J - bulk packagedTwo conductor with normally closed circuit switch.No. 2284JP - display packageNo. 2284J - bulk packaged
1/4” (6.3mm) MONO PHONE JACKS
1/4” (6.3mm) STEREO PHONEPLUGS
1/4” SOLDERLESS SHIELDEDScrew terminals.
No. 523WS - package of one
No. 520-RED - display packaged, redNo. 520-BLK - display packaged, blackNo. 520-YEL - display packaged, yellowNo. 520-BLU - display packaged, blueNo. 520-GRY - display packaged, greyNo. 520B-RED - bulk packed, redNo. 520B-BLK - bulk packed, blackNo. 520B-YEL - bulk packed, yellow No. 520B-BLU - bulk packed, blue No. 520B-GRY - bulk packed, grey
3 CONDUCTOR 1/4” JACKS1/4” dia. 3 conductorphone jacks in 3/8” dia.hole in panels up to1/8” thick. Mountinghardware is included.Open Circuit, stereo.
No. 2287P - display packagedNo. 2287 - bulk packaged 3 conductor with single normally closedswitch.
STEREO 1/4” JACK3 conductor jack enclosedin black plastic housing.
Normally closed switcheson both circuits - tip, ring.
No. 2288CP - display packagedNo. 2288C - bulk packaged
STEREO CHASSIS MOUNTJACKS
ISOLATED (Plastic Bushing)The jacks mount in a 0.46” hole. 3 conductor (stereo) switching barrel isnot grounded.
Normally closed switches on both circuits - tip, ring.No. 2281P - displaypackagedNo. 2281 - bulk packaged
3 conductor (stereo). Two single pole, double-throw switches operate when plugis inserted. Totally isolated from phoneplug connections.
No. 2282P - display packagedNo. 2282 - bulk packaged
1/4” PHONE PLUG- SHIELDED
PHONE PLUGS & JACKS
STEREO 3.5MM MINIATUREPHONE PLUGS
Stereo MINIATURE PHONE PLUG3.5MM 3Conductor. Solderterminals, blackplastic body withmolded in strainrelief. Body 3/8”diameter, overall length 2 1/8”No. 502P - display package of oneNo. 502PB - bulk packagedNo. 502GP - display package, gold platedNo. 502GPB - bulk packaged, gold platedNo. 70-017 - gray handle, display pkg. of 2No. 70-017B - bulk packaged
Stereo MINIATURE PHONE JACKChassis or Panel mounting.3.5mm, 3 Conductor with solder terminals.Completely sealed jack, non-switching.Mounts in 1/4” hole in panels up to .075” thick.With hardware, attractive knurled nut. No. 504K - display package of oneNo. 504KB - bulk packaged
Stereo MINIATURE PHONE JACKChassis or PC board mount-ing. 3.5mm, 3 Conductor.Solder terminals, Completelysealed jack, switching. Mountsin 15/64” hole in panels up to1/16” thick.
No. 502J - display package of oneNo. 502JB - bulk package
Note: Unless otherwise specified,plug and jack exposed metal parts are normally bright nickel plated, Soldering tabs and lugs are usually tinned brass for best solderjoints; except in case where gold or silver is used.
Stereo MINIATURE PHONE JACK3.5MM, 3 Conductor.Solder terminals, blackplastic body with mold-ed-in strain relief. Body3/8” diameter, overalllength 2 1/8”
No. 502V - display package of oneNo. 502VB - bulk packagedNo. 70-026 - gray handle, display pkg. of 2No. 70-026B - bulk packaged
4 Conductor 3.5mm MINIATURE PHONE PLUG & JACKS
No. 70-047 - in-line male, display pkg. of 1No. 70-047B - in-line male, bulk packagedNo. 70-086 -in-line female, display pkg. of 1No. 70-086B - in-line female, bulk packagedNo. 70-088 - chassis mt. female,
display pkg. of 1No. 70-088B - chassis mt. female,
bulk packed
Black plastic body withmolded strain relief,solder terminal.Maximum cable O.D -4.0 mm.
No. 70-097 - right angle, display pkg. of 1No. 70-097B - right angle, bulk packed
RIGHT ANGLE STEREO 3.5 mm PLUG
SHIELDED STEREO 3.5 mm PLUGHandle is nickel plated steel for shielding.Metal springstrain relief.
No. 502M - display pack of 2No. 502MB - bulk packed
70-047 70-086
70-088
STEREO 3.5 mm MINIATUREPHONE JACKS
TWO CONDUCTOR (MONO)MINIATURE PHONE PLUGS
Mono 3.5mmPHONE PLUG
This miniature phone plug hasmolded-in strain relief. Other specifica-tions are same as for No. 501P shown below. Twoblack plugs per package. No. 501PS - package two blackNo. 501PSB - bulk packagedNo. 70-015 - gray handle, display pkg. of 2No. 70-015B - bulk packaged
RIGHT ANGLE MONO3.5 mm PLUG
Black plastic body with moldedstrain relief. Solder terminals,Maximum cable O.D. 4.0 mm.
No. 70-095 - display pack of 1No. 70-095B - bulk packed
Mono 3.5mm PHONE PLUGTwo conductorminiature phoneplug. Solder lugterminals. Overalllength is 1-5/8”Dimensions are 9/16” x 1/8”.
No. 501P - packaged one black and one red
No. 501PB-BK - bulk packaged, blackNo. 501PB-RD - bulk packaged, red
SHIELDED MONO 3.5 mm PLUG
Handle is nickel plated steel for shielding.Metal spring strain relief.
No. 115P - display pack of 2No. 115PB - bulk packed
TWO CONDUCTOR (MONO)MINIATURE PHONE JACKS
TWO CONDUCTOR (MONO) MINIATURE PHONE JACKAn in-line (or cordmounting ) stan-dard 1/8” (3.5mm)miniature phonejack; two conduc-tor monaural. Open circuit (non switching). Black plastic shell, solderconnections.
No. 501V - display package of oneNo. 501VB - bulk packaged
TWO CONDUCTOR (MONO)3.5 mm MINIATURE INLINEPHONE JACK Molded body (black plastic), solder terminals.
No. 501VS - display package of oneNo. 501VSB - bulk packagedNo. 70-024 - gray handle
display pkg. of 2No. 70-024B - bulk packaged
59
PHONE PLUGS & JACKS
STEREO 2.5mm Chassis Mount Jackshielded, mounts in 15/64” hole for panel up to .075” thick
No. 666JP - package of twoNo. 666J - bulk packaged
STEREO 2.5mm JACKInline female, solder terminals.
No. 666VP - package of twoNo. 666V - bulk packaged
Note: Unless otherwise specified,plug and jack exposed metal parts are normally bright nickel plated, Soldering tabs and lugs are usually tinned brass for best solderjoints; except in case where gold or silver is used.
KNURLED NUT TOOL
No. NT500Tool is used to tighten slotted knurled nuts on3.5mm and some 2.5mm jacks. (i.e. Nos.502JB, 502KB. 501JR, 702J, 666J)
MONO 2.5mm PLUG2 conductor plug sol-der terminals 1”length, 3/32” dia.black.
No. 660PP - package of twoNo. 660P - bulk packaged
MONO 2.5mm JACKClosed circuit female,mounts in 5/32” hole andpanels up to 1/16” thick.
No. 660JP - package of twoNo. 660J - bulk packaged
MONO 2.5mmINLINE JACKSolder contacts.
No. 660VP - package of twoNo. 660V - bulk packaged
STEREO 2.5mmPLUGSolder lug. Overall length 1-1/4”No. 666PP - package of twoNo. 666P - bulk packaged
60
TWO CONDUCTOR (MONO) MINIATURE PHONE JACK Mounts in 1/4” holepanel thickness up to3/32” Closed moldedbody, closed switchingcircuit; solder lug con-nections. Supplied withknurled round nut for mounting.No. 501JP - display package of oneNo. 501JPB - bulk packaged
TWO CONDUCTOR (MONO) MINIATURE PHONE JACK Economy model minia-ture jack, closed circuit.Mounts in a 1/4” dia. holein chassis up to 1/16”thick. Supplied withknurled, slotted round nutand washer.No. 702JP - display package of oneNo. 702J - bulk packaged
TWO CONDUCTOR (MONO)MINIATURE PHONE JACKS
2.5 MM (SUB MINIATURE)PHONE PLUGS
RIGHT ANGLE STEREO 2.5 mm PLUGBlack plastic body with molded strain relief.Solder terminals,maximum cableO.D. - 4.0 mm
No. 70-093 - right angle, package of 1No. 70-093B - right angle, bulk packaged
RIGHT ANGLE MONO 2.5 mmPLUGBlack plastic bodywith molded strainrelief. Solder ter-minals, maximumcable O.D. 4.0mm.
No. 70-091 - right angle, package of 1No. 70-091B - right angle, bulk packaged
2.5 mm (SUB MINIATURE) PHONE JACKS
ISOLATED PHONE JACKS
Plastic body for both 2.5mm & 3.5mm with sol-der terminals.Mount in 5/16” mounting hole (frontmount) in panel up to 1/8” thick.
No. 70-626 - Mono (2 conductor)display package of one
No. 70-626B -Mono (2 conductor) bulk package
No. 70-636 - Stereo (3 conductor) display package of one
No. 70-636B -Stereo (3 conductor) bulk packaged
2.5 mm JACKS
No. 70-524 - Mono (2 conductor) display package of one
No. 70-524B - Mono (2 conductor) bulk package
No. 70-534 - Stereo (3 conductor) display package of one
No. 70-534B - Stereo (3 conductor)bulk packaged
3.5 mm JACKS
AUDIO ADAPTORS
1/4” Stereo Phone Jack to Mini 1/8” Mono Phone Plug
No. 549A
1/4” Stereo Plug to Two 1/4” Stereo Jacks
No. 2000
3.5mm Stereo Plug to 2.5mm Stereo Jack
No. 630A
2.5mm Stereo Plug to 3.5mm Stereo Jack
No. 640A
3.5mm Mono Plug to 2.5mm Mono Jack
No. 544A
STEREO HEADPHONE ADAPTOR KIT
RCA Phono Jack to Miniature 1/8” Mono Phone Plug
No. 533A
RCA Phono Plug to Miniature 1/8” Mono Phone Jack
No. 531A
1/4” Mono Phone Plug to Miniature1/8” Mono Phone Jack
No. 532A
1/4” Stereo Phone Jack toMini-Stereo 1/8” Phone Plug
No. 558A
Kit includes all of the popular mini-stereo adap-tors. Fill most all connection needs withPhilmore No. 4100.Kit contains the following adaptors:
No. 4100
(1) 3.5mm mini-mono plug to1/4” stereo jack. (540A)
(1) 3.5mm mini-mono plug to3.5mm stereo jack. (560A)
(1) 1/4” stereo plug to3.5mm stereo jack. (559A)
(1) 3.5mm mini-stereo plug to1/4” stereo jack. (558A)
1/4” Stereo Phone Plug to Mini-Stereo 1/8” Phone Jack
No. 559A
Mono Mini 1/8” Phone Plug toMini-Stereo 1/8” Phone Jack,
No. 560A
Mono Mini 1/8” Phone Plug toMini-Stereo 1/8” Phone JackRight Angle
No. 561A
Stereo Mini (1/8”) Phone Plug toMini-Stereo (1/8”) Phone JackRight AngleNo. 556A
1/4” Mono Phone Jack to 1/8” Mini Mono Phone Plug
No. 540A
1/4” Mono Phone Jack to RCA Phono Plug
No. 530A
RCA Phono Plug Both Ends
No. 535A
1/8” Mono Jack to Subminiature -Mono PhonePlug
No. 542A
1/4” Stereo Phone Plug to 3.5mmMono Jack
No. 538A
RCA Phono Jack Both Ends
No. SAG13 - Gold PlatedNo. SA13 - Standard
Dual RCA Jack to Dual JackAdaptorGold Plated
No. SAG23
Triple RCA Jack Adaptor. GoldPlated. Red, White and Yellow Color-coded
No. 45-333G
Stereo Couplers1/8” (3.5MM) Stereo Jack to1/8” (3.5MM) Stereo Jack
No. 33-182
1/4” (6.3MM) Stereo Jack to 1/4” (6.3MM) Stereo Jack
No. 33-142
1/4” Stereo Phone Plug toMini (1/8”) Stereo Phone JackRight Angle
No. 559RA
Phono Jack to 1/4” Mono PhonePlug
No. 114
61
1/8” Stereo Plug to Two 1/8” Stereo Jacks
No. 2030
AUDIO ADAPTORS / DC PLUGS & JACKS
62
LOCKABLE DC PLUGS & JACKSNew design DC plug and jack to hold the connector securely with a slight turn (clockwise) of the plug. Both new design plugs and jacks can beused with regular DC jacks and plugs.
Plastic housing, mount in 0.515”(33/64”) mounting hole panel up to0.25” thick solder terminals.
No. 2475 - 2.1mm center pin, display pack of oneNo. 2475B - 2.1mm center pin, Bulk packedNo. 2485 - 2.5mm center pin, display pack of oneNo. 2485B - 2.5mm center pin, Bulk packed
LOCKABLE DC JACKS
These DC plugs are designed to matewith Philmore DC jacks No. 2475 and No. 2485 and other DC jacks of thesame size. Solder terminals with9.5mm plug length.No. 2150 - 2.1mm x 5.5mm plug, display pack of oneNo. 2150B - 2.1mm x 5.5mm plug, Bulk packedNo. 2550 - 2.5mm x 5.5mm plug, display pack of oneNo. 2550B - 2.5mm x 5.5mm plug, Bulk packed
LOCKABLE DC PLUGS
DC coaxial power plugs with 9.3mm longbarrel, plastic handle with molded strainrelief (Max. cable O.D. 4.5mm). Solder ter-minals.
No. 219 - 2.1mm x 5.5mm plug, display pack of oneNo. 219B - 2.1mm x 5.5mm plug, Bulk packedNo. 259 - 2.5mm x 5.5mm plug, display pack of oneNo. 259B - 2.5mm x 5.5mm plug, Bulk packed
DC PLUGS
Six foot 22awg black zip cord. MoldedDC coaxial jack on one end, strippedand tinned on other end.
No. 48-257 - 2.1mm center pin (mate with 2.1mm x 5.5mm DC plug)No. 48-258 - 2.5mm center pin (mate with 2.5mm x 5.5mm DC plug)For bulk packed product, add suffix letter”B” to the part number.
DC COAXIAL JACK POWER CORDSBULK DC POWER CORD
Media Star Plus Audio and Video adaptors provides discriminating users with a wider range of adaptors for home sound and video systems.Precise manufacturing and pure, virgin materials continue the practice of Media Star top performance products with only a small increase in costover most ordinary connectors, cables and adaptors. 24K Gold plating on contact surfaces and precise assembly guarantee life long, perfect con-nections.
Adaptors are color coded for easy user identification: black for monaural, red for stereo and yellow indicates video use. Why not use the best,so that the best that your equipment can do will not be diminished by the connections. Look for Media Star Plus products on display at better elec-tronics parts suppliers.
No. 71-1205 - 1/4” Stereo jack - 1/8” Mono plugNo. 71-1210 - 1/4” Mono jack - 1/8” Mono plugNo. 71-1215 - 1/4” Mono jack - RCA plugNo. 71-1220 - RCA jack Female couplerNo. 71-1225 - RCA jack - 1/4” Mono plugNo. 71-1230 - RCA jack - 1/8” Mono plugNo. 71-1235 - RCA plug - 1/8” Mono jackNo. 71-1240 - 1/4” Stereo jack - 1/8” Stereo plugNo. 71-1245 - 1/4” Stereo plug - 1/8” Stereo jackNo. 71-1250 - 1/8” Mono plug - 1/8” Stereo jackNo. 71-1255 - 3.5mm Stereo plug - 2.5mm Stereo jackNo. 71-1260 - 2.5mm Stereo plug - 3.5mm Stereo jackNo. 71-1265 - 3.5mm Mono plug - 2.5mm Mono jackNo. 71-1270 - S-VHS Female - couplerNo. 71-1275 - 1/8” Stereo jack - 1/8” Stereo jack coupler
DescriptionP* %( No.
24 AWG BLACK TWO CONDUCTOR UNSHIELDEDCABLE (ZIP CORDS). One conductor is marked withwhite line for polarity identification, make your ownDC coaxial plugs and jacks with same quality cableused on our DC plug cable assemblies with 24 awgwire. Available on 100’ and 500’ spool.
No. 48-210 - 100 ft. spoolNo. 48-250 - 500 ft. spool
Locking DC Power Plugs
The locking collar threads onto the mating jack(Philmore #2112 & #2512) to hold the connec-tion securely. The Plug has solder terminalswith a black plastic handle.
Part No.
21602560
Diameter(I.D.)
.083” (2.1mm)
.098” (2.5mm)
OverallLength1.65”1.65”
O.D.
(5.5mm)(5.5mm)
No. 71-1220 No. 71-1230No. 71-1205
No. 71-1240 No. 71-1255 No. 71-1270
DC COAXIAL PLUGS & JACKS
Part No.
3113133212112325
2512306308
EIAJClass
--------
Voltage
--------
Center Pin(I.D. Mating Plug)
1.1mm1.3mm2.1mm2.1mm2.5mm2.5mm
2.85mm2.85mm
I.D.
3.5mm3.5mm5.5mm5.5mm5.5mm5.5mm5.6mm6.3mm
MatingPlug
No. 202No. 204No. 210No.2160No. 250No.2560No. 206No. 208
MountingHole
0.313”0.313”0.437”.0313”0.437”0.313”0.437”0.437”
Panel Mount DC Power Jacks(Metal Housing)
PartNo.
TC204TC210TC21848-218TC250TC25848-22848-41248-410TC240TC27548-420TC265
EIAJClass
--------IIIIIIIVV
I.D.
1.3mm2.1mm2.1mm2.1mm2.5mm2.5mm2.5mm
1mm center pin.7mm1.7mm1.7mm
1mm center pin1.4mm center pin
O.D.
3.5mm5.5mm5.5mm5.5mm5.5mm5.5mm5.5mm7.0mm
2.35mm4.0mm
4.75mm5.5mm6.5mm
MoldedPlug
Right AngleRight Angle
StraightRight AngleRight Angle
StraightRight Angle
StraightStraight
Right AngleRight Angle
StraightRight Angle
Wire Size(AWG)
24241818241818242424242418
COAXIAL PLUG POWER CORDSSix foot cords molded DC coaxial plug on oneend, stripped and tinned on other.
Part No.
256257258261262263
EIAJClass
---IIIIII
Voltage
---
DC 3.15V-belowDC 3.16V-6.3VDC 6.4V-10.5V
Center Pin(I.D. Mating Plug)
1.3mm2.1mm2.5mm.7mm
1.7mm1.7mm
I.D.
3.5mm5.5mm5.5mm
2.35mm4.0mm
4.75mm
MatingPlug
No. 204No. 210No. 250No. 235No. 240No. 275
IN-LINE DC POWER JACKSSolder lug terminals and flexible plastic strain relief.Color: Black
Part No.
2472477248
2487335340375355365
EIAJClass
----IIIIIIIVV
Voltage
----
DC 3.15V-belowDC 3.16V-6.3VDC 6.4V-10.5V
DC 10.6V-13.5VDC 13.6V-18V
Center Pin(I.D. Mating Plug)
2.1mm2.1mm2.5mm2.5mm.7mm
1.7mm1.7mm
3.3mm (1mm center pin)4.35mm (1.4mm center pin)
O.D.
5.5mm5.5mm5.5mm5.5mm
2.35mm4.0mm
4.75mm5.5mm6.5mm
MatingPlug
No. 210No.210No. 250No. 250No. 235No. 240No. 275No. 255No. 265
PANEL MOUNT DC POWER JACKS
(Plastic Housing)
Select needed item based upon the inside diam-eter of your mating coaxial plug. Plastic body, sil-vered solder lugs.
MountingHole
0.50” (Front Mount).437 Snap-In Type0.50” (Front Mount).437 Snap-In Type
0.325”0.325”0.325”0.53”0.53”
Nos. 247 & 248 Nos. 335, 340 & 375 Nos. 2477& 2487 Nos. 355 & 365
Part No.
201211212215205207220213214
No. 201
No. 205
No. 207
Nos. 211, 212 & 215 No. 214 No. 213 No. 220
EIAJClass
----IIIIIIIVV
Voltage
----
DC 3.15V-belowDC 3.16V-6.3VDC 6.4V-10.5V
DC 10.6V-13.5VDC 13.6V-18V
Center Pin(I.D. Mating Plug)
1.1mm1.3mm2.1mm2.5mm.7mm
1.7mm1.7mm
3.3mm (1mm center pin)4.35mm (1.4mmcenter pin)
I.D.
3.5mm3.5mm5.5mm5.5mm
2.35mm4.0mm
4.75mm5.5mm6.5mm
MatingPlug
No. 202No. 204No. 210No. 250No. 235No. 240No. 275No. 255No. 265
PCB Mount DC JacksPCB Mounting, Side entry jacks. Select needed item based upon themating plugs inside diameter.
Note: Full Specifications and foot prints available upon request.
DC POWER PLUGSComplies with Electronic Industries Association of Japan(EIAJ) RC-5320 Standards. Solder Lug Terminals and flexibleplastic strain relief. Available in both straight and right anglecolor black.
DC PlugPart No.
2352359240
2409275
2759
255
2559
265
285
Rated Voltage (DC)3.15 &Below3.15 &Below
3.16 - 6.33.16 - 6.36.4 - 10.56.4 - 10.5
10.6 - 13.5
10.6 - 13.5
13.5 - 18
24.0
EIAJ
IIIIIIIIIIIIIV
IV
V
Sizes I.D. x O.D.
.7mm x 2.35mmR/A .7mm x 2.35mm
1.7mm x 4.0mmR/A 1.7mm x 4.0mm
1.7mm x 4.75mmR/A 1.7mm x 4.75mm
3.3mm x 5.5mm1mm x center pin
R/A 3.3mm x 5.5mm1mm center pin
4.35mm x 6.5mm1.4mm x center pin
3.1mm x 6.5 mm1.0mm center pin
No. 2112 & No. 2512
63
Straight plug R/A plug
DC COAXIAL PLUGS & JACKS
INTERCHANGEABLE DC PLUGS Right Angle DC Plugs can be used with Philmore AC/DC Power Supply such as:Nos. BE226, BE227, BE240, 48-140 and DC/DC Power Supply Nos. BE19, 48-150 and 48-160. Make your own DCpower cords, extensions or adaptors with extension cords Nos. 48-1021, 48-1025, 48-1020, 48-1202, & 48-1035.
EXTENSION CORDS6 ft. - 20 AWG Cable, Black
2.5mm Male
No. 48-2500
3.5mm Male
No. 48-3500
9V Battery Snap
No. 48-9000
2.5 x 5.5mm
No. 48-2555
1.5 x 5.5 mm
No. 48-1555
1.7 x 4.0mm
No. 48-4740
2 Pin Socket to 2.1mm DC Jack
No. 48-1021
2 Pin Socket to 2.5mm DC Jack
No. 48-1025
2 Pin Plug to 2 Pin Socket
No. 48-1020
2 Pin Socket to Stripped and Tinned End
No. 48-1035
1.75 x 4.75mm
No. 48-1475
1.35 x 3.5mm
No. 48-3535
1.0 x 3.0mm
No. 48-1030
0.75 x 2.35mm
No. 48-475
2.5 x 5.0mm
No. 48-2550
1.5 x 5.0mm
No. 48-1550
2.8 x 5.5mm
No. 48-5528
3.0 x 6.3mm
No. 48-6330
1.0 x 7.0mm
No. 48-480
2.1 x 5.0mm
No. 48-2150
2.1 x 5.5mm
No. 48-2155
No. 278 0.7mm x 2.35mm DC Plug-No. 257 Jack No. 280 0.7mm x 2.35mm DC Plug-No. 258 JackNo. 282 0.7mm x 2.35mm DC Plug-No. 501VS JackNo. 284 1.7mm x 4.0mm DC Plug-No. 257 JackNo. 286 1.7mm x 4.0mm DC Plug-No. 258 Jack
No. 288 1.7mm x 4.0mm DC Plug-No. 501 VS JackNo. 290 1.7mm x 4.75mm DC Plug-No. 257 JackNo. 292 1.7mm x 4.75mm DC Plug-No. 258 JackNo. 294 1.7mm x 4.75mm DC Plug-No. 501 VS Jack
DC POWER PLUG/JACK ADAPTOR
With 6 ft. CordPermits use of a DC power supply with a widevariety of equipment that does not have a com-patible connector. Select an adaptor (below)with a jack that will mate with your power sup-ply and, on the other end, a plug that will matewith your equipment.
3mm COAXIAL POWER PLUGNo. 206No. 206B - bulk packagedThis size coaxial power plugfits the late modelPanasonic and JVCdevices. 3.0mm I.D. x 5.5mm O.D.
3mm COAX POWER PLUG For Video Camera Battery Packs
No. 208 - BlackNo. 208B - bulk packagedA coax power plug for videobattery packs for Panasonic,RCA etc. 3.0mm I.D. x6.3mm O.D. solder terminals and flexible strainrelief.
COAXIAL POWER PLUGS
Part No.
202204
2049210
2109210L250
2509250L
I.D.
1.1mm1.3mm1.3mm2.1mm2.1mm2.1mm2.5mm2.5mm2.5mm
OverallLength
1”1”
R/A1”
R/A1-7/16”
1”R/A
1-7/16”
Mating Jack
201 or 311211 or 313211 or 313
212, 321, 2112, 247212, 321, 2112, 247212, 321, 2112, 247215, 325, 2512, 248215, 325, 2512, 248215, 325, 2512, 248
O.D.
3.5mm3.5mm3.5mm5.5mm5.5mm5.5mm5.5mm5.5mm5.5mm
Part No.
209249
CENTER PIN
2.1mm2.5mm
COAXIAL POWER PLUG ADAPTORAll adaptors in this series have a3.5mm, 2 conductor jack. Permits youto use an AC adaptor (i.e. power sup-ply) with other types of electronicequipment.No. 216 - 1.3mm I.D. X 3.5 mm O.D. DC PLUGNo. 217 - 2.1mm I.D. X 5.5 mm O.D. DC PLUG No. 218 - 2.5mm I.D. X 5.5 mm O.D. DC PLUG
COAXIAL POWER JACKSBehind panel mounting. Twohole mount on 11/16” cen-ters; screws supplied.
COAXIAL POWER PLUGfor Cellular Phone Battery ChargerSolder Lug terminals andflexible plastic strainrelief.
No. 1135 - 1.1mm I.D. x 3.5mm O.D.No. 1438 - 1.4mm I.D. x 3.8mm O.D.
No. 48-1202
2 Pin Socket to 2 Pin Socket
64