philips oneblade stand, equipment storage and charging dock · support storage stand phillips...
TRANSCRIPT
Summary
I was looking for some proper stand for my new OneBlade. Originally I wasinspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584Thank you xenotrim! https://www.thingiverse.com/xenotrim/aboutIt was not exactly tha one I was looking for so I designed the new Thing, byFusion 360.
I designed the side slots for trim adapters slanted by 10 degrees in orderto keep them in place as the slots are designed with a clearance.I added the specific side slots for 2pcs of spare razor blades. There isenough space to put there razor blades even with the attachments on it.Main slot for the razor is divided in order to attach the charging cord easilyand properly fix the charger in prepared slot for the connector. Just pushslightly the connector towards the eliptical slot and it is firmly fixed.On the top only added two slots for additional equipments.
Hope you like this and find it useful.If you would give it a shot, please share your makes. I would be curious foryour results...:-)
I added two versions of stand, 50mm and 45mm width of side slots.
p pbilek
Philips OneBladeStand, equipmentstorage andcharging dock
VIEW IN BROWSER
updated 11. 1. 2020 | published 11. 1. 2020
9.79 hrs
1 pcs
f
0.30 mm
k
0.40 mm
h
1
192.00 g
d
MK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
33.2 MB
9.79 hrs f 0.30 mm k 0.40 mm h PLA 192.40 g d MK3/S
updated 11. 1. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
Household > Bathroom
support storage stand phillips philips oneblade one
holder equipment dock charging blade
Category: Bathroom Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0,3
Infill: 10% gyroid
Filament: PrusaPLA PLA WhiteNotes:
I have used the 0,3mm layer height, as it was only the first test print and Idid not expect such a success.I have used standard generated supports by PrusaSlicer. I think that withlower resolution it would works fine even without any supports.
oneblade_stand_03mm_pla_mk3_9h48m.gcode
1.4 MBupdated 11. 1. 2020
1.4 MBupdated 11. 1. 2020
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
oneblade_stand_45mm_side_slots.stl
oneblade_stand_50mm_side_slots.stl