phast risk installation notes
TRANSCRIPT
-
7/22/2019 Phast Risk Installation Notes
1/41
DNV SOFTWARE
Palace House, 3 Cathedral Street, London SE19DE, UK
www.dnv.com/software
Copyright Det Norske Veritas. All Rights Reserved.
No reproduction or broadcast of this material is permitted without the express written consent of DNV.
Contact [email protected] for more information
Phast RiskInstallation Notes for Version 6.7
For Product modes Phast Risk and Phast Risk Micro
-
7/22/2019 Phast Risk Installation Notes
2/41
Phast Risk v6.7 Installation Notes 1 Whats in the Shipment?
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Phast Risk 6.7 Installation Notes
Contents
Whats in this Shipment, on the DVD and from the Download...............................................................3
In the Shipment.................................................................................................................................3On the DVD......................................................................................................................................3
Index.htm file........................................................................................................................... 3
Admin_Installation .................................................................................................................. 3
Documentation......................................................................................................................... 3
License_Wizard ....................................................................................................................... 3
Phast_Installation..................................................................................................................... 4
PhastRisk_Installation.............................................................................................................. 4
From a Download .............................................................................................................................4System Specification ................................................................................................................................6
Recommended Processor Speeds............................................................................................. 6
Storage Space Required ........................................................................................................... 6
Details of the Installation Process for Phast Risk Products......................................................................7
Using the Download to Start the Installation....................................................................................7
Using the DVD Browser System to Start the Installation ................................................................7
Installation options ...........................................................................................................................9
Things to be aware of .....................................................................................................................10
The Phast Risk Installation Stages..................................................................................................10
Do I need to obtain a license in order to run v6.7?................................................................ 20
.NET Framework 2.0 Installation...................................................................................................21
Network installation of the Administrative Files............................................................................22
Setting up a License for Phast Risk 6.7..................................................................................................26
Do I Need to Request a License File from DNV Software?...........................................................26
Request a License File ....................................................................................................................26
Importing a License File .................................................................................................................28
Setting a Windows Service.............................................................................................................28
Removing Phast Risk .............................................................................................................................33
Steps to follow for un-installing Phast Risk 6.7 .............................................................................33
Known Issues .........................................................................................................................................35
.NET Framework 2.0 required before installing Phast Risk 6.7.....................................................35
Phast and Phast Risk 6.531 incompatibility ...................................................................................35
Phast and Phast Risk 6.54 and 6.6 compatibility............................................................................35
SQL Server 2008 ............................................................................................................................35
Installation timeout.........................................................................................................................35
File Permissions and User Rights ...................................................................................................36
Study Folder Files Location ...........................................................................................................37Installation while the User is not connected to the Organization Network ....................................37
-
7/22/2019 Phast Risk Installation Notes
3/41
Phast Risk v6.7 Installation Notes 2 Whats in the Shipment?
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Virtualisation ..................................................................................................................................37
USB Security Key inserted before Phast Risk is Installed .............................................................37
Request a License without Administrator Rights ...........................................................................38
Add a License File without Administrator Rights..........................................................................39
All installation must be started from either setup.exe or index.htm...............................................40
-
7/22/2019 Phast Risk Installation Notes
4/41
Phast Risk v6.7 Installation Notes 3 Whats in the Shipment?
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Whats in this Shipment, on the DVD and from theDownload
In the Shipment
Your shipment includes the following:
A DVD with the installation files for Phast, Phast Risk, DNVS License Wizard and PhastAdmin Files. If you have downloaded the release from the internet as a zip file, please treat the
unzipped file as the DVD.
Depending on your status as a new or existing user, and your agreement concerning hardwareand software licensing, there may be a hardware security key (sometimes called dongle)
included in this shipment. If you have a USB security key you will have to attach it to the USB
port of your PC; if you have a parallel security key you will have to insert it to the parallel port
on your PC probably between the printer cable and the PC port.
If anything is missing from your package please contact your local sales and support office, the
contact details of which are shown on the DVD.
On the DVD
This section gives a brief overview of the contents of the DVD for reference. You should read the
description of the installation process in these Installation Notes before you start to install the program.
Index.htm file
This file is located at the top level of the DVD folder structure. It opens a browser (or menu) screen
which allows you to select the programs to install, and view the documentation. This is described in
more detail in the Installation Instructions.
The other main contents of the DVD are located in three folders. The folders are described below, in
alphabetical order.
Admin_Installation
The small installation in this folder will install the Admin Files in a
specific location, generally on a network drive. This sort of
configuration is relevant in a corporate environment where all Phast
and Phast Risk users must share the same Admin Files. If a user has
to work offline these files will not be available.
Documentation
Several types of documentation are supplied and organized into
folders on the DVD. This document and all release and installation
notes are in this Documentation folder. Technical documentations
are in the Technical_Reference sub-folders.
License_Wizard
The DVD contains a set of installation files for the DNVS License
Wizard. You do not have to use these installation files if you are
installing Phast Risk v6.7, since the License Wizard is installed as part of the Phast Risk main
installation. However, in some situations you might want to install the License Wizard without
installing Phast Risk: if you want to use the License Wizard to handle licensing for another DNV
Software product; or if you want to set up concurrent licensing for Phast Risk on a network without
installing Phast Risk itself.
-
7/22/2019 Phast Risk Installation Notes
5/41
Phast Risk v6.7 Installation Notes 4 Whats in the Shipment?
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Phast_Installation
For version 6.7, there is a specific setup program that will allow you to install any Phast, Phast Micro
and/or Phast FX product. This specific setup program also installs all of the supporting files (e.g. the
Admin files, License Wizard, third-party components such as Intergraph Geomedia Object 6.1.5, etc.).
You cannot install Phast Risk from this folders setup.
PhastRisk_Installation
For version 6.7, there is a specific setup program that will allow you to install any Phast Risk and/or
Phast Risk Micro. The setup program also installs all of the supporting files (e.g. the Admin files,
License Wizard, third-party components such as Intergraph Geomedia Object 6.1.5 and SQL Server
Express 2010, etc.). It is possible to also install the Phast products from this Phast Risk setup, but this
is not recommended as this would install unnecessary third-party components only required by Phast
Risk which would unnecessarily consume several gigabytes of disk space.
The next section gives detailed instructions for installing the program, and you should read these
instructions before you start the installation process.
From a Download
From the DNV software download website, (http://tinyurl.com/dnvsportal) several download options
are available:
Phast 6.7 installation: this corresponds to the folders Phast_installation, Admin_Installationand Documentations on the DVD as described above. This installation does not include Phast
Risk micro or Phast Risk, only customers with Phast, Phast Micro or Phast FX should
download and install this package. The file is named Phast_6_7.zip and it must be unzipped
locally prior to any installation.
DNVS License Wizard 3.2 installation: This corresponds to the folder License_Wizard on
the DVD as described above. The file is named License_Wizard_3_2.zip and it must beunzipped locally prior to any installation.
Phast Risk 6.7 installation: this corresponds to the folders PhastRisk_installation,Admin_Installation and Documentations on the DVD as described above. Only customers
with a Phast Risk micro or Phast Risk license should download and install this package. The
file is named PhastRisk_6_7.zip and it must be unzipped locally prior to any installation.
Running the installation within the unzip tool may cause installation failure.
In order to reduce the size of the download, the browser System from the download file offers a simple
interface for starting the Phast installation. As most operating system settings prevent the start of a file
when accessing a folder, the installation process is started by opening the file
PhastRisk_README.htm placed in the folder where the downloaded PhastRisk_6_7.zip file wasunzipped.
The PhastRisk_README.htm presents several options: read the Release Notes and the Installation
Notes, start the Admin Files Folder or Phast Risk 6.7 installation or browse the technical
documentation.
It also provides a simplified installation process.
-
7/22/2019 Phast Risk Installation Notes
6/41
Phast Risk v6.7 Installation Notes 5 Whats in the Shipment?
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
-
7/22/2019 Phast Risk Installation Notes
7/41
Phast Risk v6.7 Installation Notes 6 System Requirements
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
System Specification
The recommended specification for Phast Risk v6.7 is as follows:
Operating
system
Windows XP SP3, Windows Server 2003, Microsoft Vista, Windows7
Internet Browser IE 5.0x. This does not have to be set as your default browser, but you must have
at least this version installed in order to run the program.
Display 800x600 resolution or higher
Screen color
depth
65536 (16-bit) and higher
CPU 32 bit CPU from Intel or AMD (for example Intel Core2 Duo)
Media DVD-ROM drive or internet connection
Pointing device MS Mouse or compatible
No virtualisations, e.g. using Citrix or XP mode on Windows7, are supported.
Recommended Processor Speeds
Recommended CPU
Speed (minimum)
Recommended Memory
(minimum)
Phast Risk Micro 1.6GHz 1GB (512MB)
Phast Risk 2GHz 2GB (1GB)
Phast Risk with Extended Risk Reporting 2.8GHz 3GB (2GB)
Phast Risk (large study) 3.2GHz 6GB (4GB)
These values are based on acceptable behaviour. Depending on your needs you may consider to select
a more powerful machine.
Storage Space Required
Phast Risk Licence Wizard Phast Admin Files
XP SP3 3.9GB 0.4GB
Vista (Professional) 5.7GB 0.8GB
Vista SP2 (Enterprise) 3.3GB 0.8GB
Windows7
(Professional)
2.2GB 0.3GB
40MB
The disk space requirements indicated above are based on a clean operating system with no additional
software or settings. Depending on your system, the amount of disk space required may be smaller.
-
7/22/2019 Phast Risk Installation Notes
8/41
Phast Risk v6.7 Installation Notes 7 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Details of the Installation Process for Phast Risk Products
In order to install the program, you must have administration rights for the machine. Contact your
System Administrator to check whether you have administration rights, or to obtain these rights.
Using the Download to Start the Installation
As described before, after downloading, PhastRisk_6_7.zip, unzip it on to the local hard disk and open
PhastRisk_README.htm using an Internet browser.
Using the DVD Browser System to Start the Installation
There is a browser system on the DVD which gives you an easy way of installing the programs and
viewing the documentation. This system will normally start running automatically when you insert the
DVD into the drive, and the main page of the browser system will appear as shown below. You use
the different tab sections to start the installation or to open documents.
-
7/22/2019 Phast Risk Installation Notes
9/41
Phast Risk v6.7 Installation Notes 8 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
If the main page does not appear when you load the DVD, then use Windows Explorer to view the
contents of the DVD drive so that you can see the icon for the index.htmfile at the top level of thedrive. Double-click on the icon to open the browser system.
-
7/22/2019 Phast Risk Installation Notes
10/41
Phast Risk v6.7 Installation Notes 9 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
To start the installation, move to the installationtab, which is as shown.
Installation optionsThere are several main parts in this page:
1. Main Product installations: each install includes pre-requisites (required third-partycomponents) and the product installation. Please click on the relevant link:
Phast 6.7 to install Phast, Phast Micro and Phast FX. Please refer to the PhastInstallation notes. This document is for the Phast Risk installation. This option is not
included in the Downloaded PhastRisk_6_7.zip.
Phast Risk 6.7 to install Phast Risk, Phast Risk Micro.
2. Network installation of the Administrative Files: For sharing and controlling your
administrative files on a network, please run this small installer. This is for installations
-
7/22/2019 Phast Risk Installation Notes
11/41
Phast Risk v6.7 Installation Notes 10 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
where users share Phast and Phast Risks system files including materials, parameters and new
study templates. See the section Network installation of the Administrative Files for details.
3. DNVS License Wizard: this option is applicable to a system administrator who is installingthe licensing system on a server, and is described in more detail in a later section. This section
covers the options for installing the software for the Phast Risk v6.7 products themselves. This
option is not included in the downloaded PhastRisk_6_7.zip. Please download the specificLicense_Wizard_3_2.zip.
Notes:
The Multi-Component add-on is not applicable to Phast Micro or Phast FX. You will not be able to
use the multi-component functionality in these products.
The Extended Explosion Modelling add-on is not applicable to Phast, Phast Micro, Phast FX. You will
not be able to use the Extended Explosion Modelling functionality in these products.
Things to be aware of
There are several issues which users and administrators should be aware of before installing Phast
Risk:
.NET Framework 2.0 required before installing Phast Risk 6.7
Phast and Phast Risk 6.531 incompatibility
Phast and Phast Risk 6.54 compatibility
SQL Server 2008
Installation timeout
File Permissions and User Rights
Study Folder Files Location
Installation while the User is not connected to the Organization Network
Virtualisation
USB Security Key inserted before Phast Risk is installed
All installation must be started from either setup.exe or index.htm
See the section Known Issues for more information on the above subjects. Before running the
installation it is recommended you read the Known Issues section.
The Phast Risk Installation StagesThis section describes the stages in the installation if you click on the Phast Risk 6.7link in the
installationtab of the DVD browser system. The dialogs below may look slightly different on your
system depending on the operating system or from the PhastRisk_README.htm file.
-
7/22/2019 Phast Risk Installation Notes
12/41
Phast Risk v6.7 Installation Notes 11 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
File download prompt
The link in the installation tab is connected to a
setup program for performing the installation, and
when you click on the link a dialog will appear as
shown, asking what you want to do with the script
file.
To proceed with the installation, you should click
on Run.
Internet Explorer prompt
This will appear depending on the security level
setting.
To proceed with the installation, you should click
on Run.
Setup.exe purpose
The program setup.exe checks your system and starts to install any pre-requisites (required third-party
components) not already on the machine and finally it runs the main Phast Risk 6.7 installation. Some
pre-requisites have specific license agreements that you will have to accept before their installation
can proceed. A failure in running setup.exe and proceeding directly to the main Phast Risk installation
will result in an installation failure.
Your system may already have some of the third-party components installed, in this case, the related
license agreement and installation step will not be performed. Windows XP SP3 prompts for 6 license
agreements, 5 additional components and up to 3 reboots whereas a clean Windows 7 prompts for 3
licenses and 4 additional components and no reboot.
The following steps are for a system running a clean Windows XP SP3 with no additional software
other than Microsoft XP SP3.
Application Error message
If .NET Framework 2.0 or later is not installed on
your system, you will get this message. If so,
please refer to the Known Issue section above for
the details of an additional installation step.
-
7/22/2019 Phast Risk Installation Notes
13/41
Phast Risk v6.7 Installation Notes 12 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Windows 7 Program Compatibility Assistant
On Windows 7 the program that checks whether
SQL Server is installed may fail if it does not
exist. This message can safely be disregarded.
To proceed with the installation, you should click
on This program installed correctly.
Windows Installer 3.1 License Agreement
The next screen contains the license agreement
from Microsoft.
You must read this and register your acceptance
of the agreement by clicking the button Accept.
-
7/22/2019 Phast Risk Installation Notes
14/41
Phast Risk v6.7 Installation Notes 13 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
.NET Framework 3.5 License Agreement
The next screen contains the license agreement
from Microsoft.
You must read this and register your acceptance
of the agreement by clicking the button Accept.
Windows Installer 4.5 License Agreement
The next screen contains the license agreement
from Microsoft.
You must read this and register your acceptance
of the agreement by clicking the button Accept.
-
7/22/2019 Phast Risk Installation Notes
15/41
Phast Risk v6.7 Installation Notes 14 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
.NET Framework 3.5 SP1 License Agreement
The next screen contains the license agreement
from Microsoft.
You must read this and register your acceptance
of the agreement by clicking the button Accept.
Intergraph GeoMedia Objects 6.1.7.16 LicenseAgreement
The next screen contains the license agreement
from Intergraph.
You must read this and register your acceptanceof the agreement by clicking the button Accept.
-
7/22/2019 Phast Risk Installation Notes
16/41
Phast Risk v6.7 Installation Notes 15 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Microsoft Visual Studio 2008 Report Viewer
License Agreement
The next screen contains the license agreement
from Microsoft.
You must read this and register your acceptance
of the agreement by clicking the button Accept.
SQL Server 2008 Express Edition LicenseAgreement
The next screen contains the license agreement
from Microsoft.
You must read this and register your acceptanceof the agreement by clicking the button Accept.
Additional Components to Be Installed
Depending on your system, some components
may not be listed as they already exist and do not
need to be re-installed.
You must click on the button Installto proceed
and start the installation of all these third-party
components.
-
7/22/2019 Phast Risk Installation Notes
17/41
Phast Risk v6.7 Installation Notes 16 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Setup.exe will start the installation of each third-party component in order. The system may prompt
you to reboot several times and several security warning message may appear on Windows Vista and
Windows 7 depending on the system security level setting. The whole process can take up to one hour
on some operating systems.
Copy installationsSetup may be fairly busy copying the installations locally before running them. If so, the dialog may
fail to refresh and display the Copying message. This step may take several minutes.
User Account Control Prompt
In Windows Vista and Windows 7, any
installation step must be approved. Failure to
click Yes within 90 seconds would lead to
installation failure as describes in the section
Known Issues.
Click on Yes to continue with the installation.
Pre-requisites installations
For all pre-requisites a similar progress bar will
be displayed. Some of them may take some
minutes to complete.
There is no need for any interaction. Clicking on
Cancel would abort and reverse the current pre-
requisite installation and the overall installation
will be aborted.
Reboot Prompt
Some installation steps force a reboot.
When the machine is running again, please log in
as the same user in order for setup to continue
automatically with the next installation step.
Click on Yes to reboot.
After all pre-requisites are installed, the main Phast Risk installation will automatically start.
Start of the Phast Risk Installation
First the Windows Installer copies the installation
file locally.
-
7/22/2019 Phast Risk Installation Notes
18/41
Phast Risk v6.7 Installation Notes 17 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Welcome Dialog
The first dialog tells you that the Phast Risk 6.7
Setup is preparing for the installation process. It
calculates space requirements, whether the
operating system is supported and if the pre-
requisites exist; this checking may take several
seconds. The section Known Issues mentions
some of the messages raised at this stage.
When the preparation is complete, the Next >
button will become enabled, and you must click
on this to proceed to the next stage of the
installation.
License Agreement screen
The next dialog contains the license agreement.
You must read this and register your acceptanceof the agreement by selecting the option I accept
the terms in the license agreement. You can
select and copy the text and paste it into a word-
processing program or Notepad in order to save it
into a file or print it out by click on Print if you
want a hard copy.
Once you have clicked the I acceptoption, the
Next >button will become enabled, and you can
proceed to the next stage.
Custom Setup dialog
The next dialog allows you to choose which set of
products and features to install, and to choose the
location for the installation.
The dialog lists all of the Phast Risk 6.7 products,
in descending order of the range of features in
each product. If you click on a product in the list,
a menu will drop down as shown, allowing you to
change whether or not that product is installed.
You must choose the product for which you have
purchased a license, and you should not choose
any product that is higher than this in the list. Thesetup treats the highest selected product as the
main product for the installation, and the
licensing will only run successfully if the main
product is the same for both the installation and
the license file.
However, you can select any number of lower products, and your license will run successfully with
these products. For example, if you have purchased a license for Phast Risk, this license will also
apply to Phast Risk Micro, Phast and to Phast Micro.
The sole effect of selecting additional products is to get shortcuts for those products installed to the
Desktop and the Start Menu. The additional products will not require additional program files to be
installed to your computer.
-
7/22/2019 Phast Risk Installation Notes
19/41
Phast Risk v6.7 Installation Notes 18 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Option for installing Administrative Files
Below the list of products is an Administrative
Fileoption, which covers the files that contain
system default values for parameters, materials,
and the state of new Study Folders. This is
selected for installation by default, but you should
deselect it if you are going to take the system
default values from a shared central location on
the network. This is known as a Workstation
Installation.
Note: you should only perform a Workstation Installation after the administrator has installed the
Administration Files to the network. In a later step you will have to point to the folder on that network
that contains these files, and you will not be able to complete the installation if these files are not
present.
If you are an Administrator installing the Administrative Files to the network, then you should run the
Administrative Files installation accessible within the same Installation page from the DVD BrowserSystem.
Changing the Installation Location
The Changebutton at the bottom right of the
dialog allows you to change the location to which
the program and administrative files will be
installed.
The button is enabled only when an enabled item is selected in the list above, but the location that you
set will be used for all selected files, i.e. you cannot set a different location for installing different files.
When you have made your selections in this screen, click on Next >to proceed to the next stage.
Default Study Folder File Location
The location is used to save study, database and
temporary files. (Note: The example files are
installed in the examples folder.)
The location can be changed by clicking on the
Changebutton.
The section Known Issues details several
constraints regarding this location.
Click on Next >to proceed to the next stage.
-
7/22/2019 Phast Risk Installation Notes
20/41
Phast Risk v6.7 Installation Notes 19 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
For a Workstation Installation only:
Admin Folder Dialog
This dialog appears only if you deselected the
Administrative Filesin the previous settings as
this results in Admin files not being installed on
your computer.
You must click on the Change button to
browse and locate the network folder that
contains the Admin files. Your installation will be
configured to take its system values from this
location.
The dialog will not move to the next stage if the
Admin Files do not exist at that location.
Click on Next >to proceed.
Add-on Installation DialogIf you want to use the Multi-component or/and
Extended Explosion Modelling add-ons and have
purchased a relevant license for them, you must
select the add-on in this dialog.
These Add-ons are not available for every Phast
product. For example, the Extended Explosion
Modelling option is only accessible from Phast
Risk.
Click on Next >to proceed.
Summary Dialogs for Installation Options
The next dialog summarizes the installation
options so that you can review them before you
start the installation. If you want to make a
change, click on the < Backbutton to return to the
appropriate screen.
The summary varies depending on operating
system, its configuration and selected options.
If the settings are correct and you want to proceed
with the installation, click on Install.
-
7/22/2019 Phast Risk Installation Notes
21/41
Phast Risk v6.7 Installation Notes 20 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Setup Status Dialog
If you click on Next >in the Summary dialog
described above, the installation will proceed, and
the next screen will describe the progress of the
different stages in the installation.
There are many stages in the installation since
many types of file are installed. The installation
may take several minutes, depending on the speed
of your machine.
User Account Control Prompt
On Windows Vista and Windows 7, any
installation step must be approved. Failure toclick Yes within 90 seconds would lead to
installation failure as described in the section
Known Issues.
Click on Yesto continue with the installation.
Completed Dialog
The last screen in the installation tells you that the
process is complete. Check that the text explicitly
says has successfully installed Phast Risk. The
Completed dialog looks very similar in case ofinstallation failure.
Click on Finishto close the dialog.
Do I need to obtain a license in order to run v6.7?
You will need to obtain a new or additional license for v6.7 in the following situations:
If you do not have an existing license
If you want to use the Extended Explosion Modelling add-on
To obtain the appropriate license please follow the instructions described in a later section.
For all other situations your existing license will be valid for v6.7, and you can use the program as
soon as the installation is complete, using either the shortcut that is installed to the Desktop or the
shortcut that is installed under the Start Menu.
-
7/22/2019 Phast Risk Installation Notes
22/41
Phast Risk v6.7 Installation Notes 21 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
.NET Framework 2.0 Installation
This section explains how to install .NET Framework 2.0 if you click on the .NET Framework 2.0 link
in the installationtab of the DVD browser system. This step is only relevant if you experienced the
following error message at the start of Phast Risk installation.
The dialogs below may look slightly different on your system depending on the operating system.
File download prompt
The link in the installation tab is connected to a
setup program for performing the installation, and
when you click on the link a dialog will appear as
shown, asking what you want to do with the script
file.
To proceed with the installation, you should click
on Run.
Internet Explorer prompt
This will appear depending on the security level
setting.
To proceed with the installation, you should click
on Run.
Welcome Dialog
The first dialog tells you that the .NET
Framework 2.0 Setup is preparing for the
installation process.
Click on Next >to proceed to the next stage of the
interview (user input phase of the install process).
-
7/22/2019 Phast Risk Installation Notes
23/41
Phast Risk v6.7 Installation Notes 22 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
License Agreement screen
The next dialog contains the license agreement.
You must read this and register your acceptance
of the agreement by selecting the option I accept
the terms in the license agreement. You can
select and copy the text and paste it into a word-
processing program or Notepad in order to save it
into a file or print it out by click on Print if you
want a hard copy.
Once you have clicked the I acceptoption, the
Install >button will become enabled, and you can
proceed to the installation to be performed.
The installation will run for a few minutes.
Setup Complete Dialog
The last screen in the installation tells you that the
installation process is complete.
Click on Finishto close the dialog.
You can now proceed with the Phast Risk installation as described in the previous section The Phast
Risk Installation Stages.
Network installation of the Administrative Files
For sharing and controlling your administrative files on a network, please run this small installer. This
is for installations where users share Phast and Phast Risks system files including materials,
parameters and new study templates, this is known as a Workstation Installation.
Workstation Installation is not a valid option for users who may work offline as these shared files will
not be available while their machine is not connected to the organization network.
-
7/22/2019 Phast Risk Installation Notes
24/41
Phast Risk v6.7 Installation Notes 23 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
File download prompt
The link in the installation tab is connected to a
setup program for performing the installation, and
when you click on the link a dialog will appear as
shown, asking what you want to do with the script
file.
To proceed with the installation, you should click
on Run.
Internet Explorer prompt
This will appear depending on the security level
setting.
To proceed with the installation, you should click
on Run.
Welcome Dialog
The first dialog tells you that the Phast Admin
Files 6.7 Setup is preparing for the installation
process.
Click on Next > to proceed to the next stage of the
interview (user input phase of the install process).
License Agreement screen
The next dialog contains the license agreement.
You must read this and register your acceptance
of the agreement by selecting the option I accept
the terms in the license agreement. You canselect and copy the text and paste it into a word-
processing program or Notepad in order to save it
into a file or print it out by click on Print if you
want a hard copy.
Once you have clicked the I acceptoption, the
Next >button will become enabled, and you can
proceed to the next stage.
-
7/22/2019 Phast Risk Installation Notes
25/41
Phast Risk v6.7 Installation Notes 24 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Admin Files Folder Location Dialog
You must click on the Changebutton to
browse and select the appropriate folder for these
files.
The location will have to be made readable for allPhast and Phast Risk 6.7 users by your
organisations IT helpdesk. For those who are
required to edit the Admin files using Phast Risk
in Admin mode, they will need read and write
permissions for these files.
The installation does not set these permissions.
Click on Next >to proceed.
Ready to Install Dialog
When ready, click on Install.
The installation process should take about a
minute as only a set of data files are installed.
On Windows Vista or Windows 7, a security
dialog can appear during this stage, please click
on Yeswithin 90 seconds otherwise the
installation will be aborted.
-
7/22/2019 Phast Risk Installation Notes
26/41
Phast Risk v6.7 Installation Notes 25 Details of the Installation Process for Phast Risk Products
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Completed Dialog
The last screen in the installation tells you that the
process is complete. Check that the text explicitly
says has successfully installed the Admin Files.
The Completed dialog looks very similar in case
of installation failure.
Click on Finishto close the dialog.
-
7/22/2019 Phast Risk Installation Notes
27/41
Phast Risk v6.7 Installation Notes 26 Setting up Licensing
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Setting up a License for Phast Risk 6.7
Do I Need to Request a License File from DNV Software?
You will not need to request a license file if
1. Your existing license file(s) is/are valid for the mode of Phast Risk 6.7 (Phast Micro, Phast,Phast Risk Micro, Phast Risk) and the extension (multi component, extended explosion) that
you wish to use,
If you have a valid FLEXlm1 license for an earlier version of a product or a validmulti component or extended explosion license, then you can use your existing
licenses for Phast Risk 6.7 and you do not have to obtain a new license file.
For all other situations, you (or the System Administrator) must obtain a license filefor Phast Risk 6.7, as described in the next section. You must obtain a new or
additional license file if you have never used any previous version of Phast Risk, if
you are running SAFETI NL, or if you want to use the multi-component and/or
extended explosion functionality.
Or
2. The Licensing has already been set up by the System Administrator
Some types of license2 are specific to a machine and all licensing is handled locallyon that machine. If you have arranged with DNV Software to use this type of license,
you would normally set up the licensing yourself on your machine.
Other types of license are specific to a Security Key2(sometimes called a dongle) thatcan be moved between machines, or are handled by a network server and not by the
individual machines that are running Phast Risk. For these types of license the System
Administrator may handle the process of obtaining the license file from DNV
Software, and then making the file available to users of Phast Risk.
The process of requesting a license file is described in the next section.
If you are going to use an existing license file, you do not need to take any action to set up the licence
and can start to use Phast Risk 6.7 immediately.
If you are going to use a file supplied by your System Administrator, you can omit the stage of
requesting a license file and proceed immediately to the final stage: running the License Wizard to
import this license file.
Request a License FileThe following process is a simplified version of a normal licence setting. You do not need any specific
user rights to perform it.
Start the Command Line
There are many ways to get the command line.
Choose one of the following:
1FLEXlm is a technology developed by Flexera Software and used by DNV Software to manage license.
2
License types are Floating (sometimes called Concurrent), Standaloneor Security Key. FloatingandStandalonelicenses are calledNetworklicenses in this document and they require specific setting as described in
the section Setting a Windows Service. TheNetworklicense file contains the line VENDOR dnvslm.
-
7/22/2019 Phast Risk Installation Notes
28/41
Phast Risk v6.7 Installation Notes 27 Setting up Licensing
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Press both the Windowskey () and theR key at the same time
or
Click on Start->Run (as shown on theright)
Enter cmd.exe and click on OK
Get your system details
As shown, type:
ipconfig /all >request.txt
notepad request.txt
Email the licence request
Select all the text from notepad
email it to [email protected]
Close both Notepad and the command line
(cmd.exe) windows
Wait for the licence file which will be sent to
your email inbox.
-
7/22/2019 Phast Risk Installation Notes
29/41
Phast Risk v6.7 Installation Notes 28 Setting up Licensing
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Importing a License File
Using the Windows File Explorer, please copy the licence file in the following folder (depending on
your version of Windows):
Windows XP:
C:\Documents and Settings\All Users\Application Data\DNVS\Licences
Windows Vista and Windows 7 (File Explorer may not display the folder ProgramData):
C:\ProgramData\DNVS\Licences
For versions of SAFETI-NL older than version 6.7, for any version of Windows (the foldermay have to be created first.)
C:\FLEXlm
Setting a Windows Service
In order to run the License Wizard and LMTools, you must have administration rights for the machine.
Contact your System Administrator to check whether you have administration rights, or to obtain these
rights.
This step is only necessary forNetworkError! Bookmark not defined.licenses and the import steps,
as described above, completed with the error message ERROR: License service not updated.
You should not perform the following steps if your licence is a Security Keyor Standalonelicense.
Starting the License Wizard
Launch the DNVS License Wizard from the
Windows Start Menu:
StartProgramsDNV SoftwareDNVS
License WizardDNVS License Wizard
License Wizard welcome screen
Click on Next > to proceed to the next stage
-
7/22/2019 Phast Risk Installation Notes
30/41
Phast Risk v6.7 Installation Notes 29 Setting up Licensing
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Select Advanced features
Choose Advanced featuresand click on Next > to
proceed to the next stage
Start the Advanced tool: LMTools
Choose Start Advanced tooland click on Next >
to start the Advanced tool LMtools
LMTools from Flexera Software (formerlyMacrovision)
Select Configuration Using Service
If there is any service in the list, please contact
DNVS Helpdesk for advice.
Click on the tab Config Services in order to enter
the service details
Define the licensing Service Name
Either:
select from the dropdown listRMS_LICENCE_service or
type RMS_LICENCE_service if the namedoes not exist (please note the British
spelling).
Click on the first buttonBrowse in order tospecify the location of the lmgrd.exe file
-
7/22/2019 Phast Risk Installation Notes
31/41
-
7/22/2019 Phast Risk Installation Notes
32/41
Phast Risk v6.7 Installation Notes 31 Setting up Licensing
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Select the service activation
Tick-mark Use Services
Tick-mark Start Server at Power Up
Click on Save Serviceto create the service
Accept to save the settings
Click on Yesto save the settings
Start the service
Click on the tab Start/Stop/Reread
Select the service RMS_LICENCE_service
Click on Start Serverto start the service
Check the service statusCheck whether the service started successfully. If
not please double-check the service settings made
in this section.
Otherwise your system is configured formanaging the license.
In case of failure, please contact DNVSoftware Helpdesk for advice.
Click on the top right button to exit fromLMTools.
-
7/22/2019 Phast Risk Installation Notes
33/41
Phast Risk v6.7 Installation Notes 32 Setting up Licensing
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Exit from the License Wizard
Click on Exitto quit the License Wizard
Optional additional check
Most of the time, LMTools reports a successful
start. However, the related processes may fail due
to various reasons (such as an invalid license file
or conflicting service setting). It may take a
minute for all the processes to be active.
It is worth checking that all processes are running
using Windows Task Manager.
Three processes should be running as shown on
the right in the tab Processes:
Two lmgrd.exes and one dnvslm.exe
If dnvslm.exe does not appear after a minute,
please contact DNV Software Helpdesk.
Click on the top right button to exit from Task
Manager.
-
7/22/2019 Phast Risk Installation Notes
34/41
Phast Risk v6.7 Installation Notes 33 Removing Phast Risk
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Removing Phast Risk
Should it be necessary to un-install Phast Risk, the un-installation must be performed in the correct
order, to avoid possible problems when re-installing Phast Risk 6.7, or installing other versions of
Phast Risk on the same computer.
The aim of this section is to list the steps required to perform a clean un-installation of Phast Risk 6.7.
Steps to follow for un-installing Phast Risk 6.7Itis strongly recommend that users seek the help of their IT administrator in performing the following
procedures since some steps may damage the users computer. Do not hesitate to contact DNV
Software Helpdesk for further advice.
1. In the Windows Startmenu launch the Control Paneland choose Add or Remove Programs(Windows XP) or Uninstall a program(Vista/Windows7)
2. Remove DNV Software Phast 6.7
3. Remove DNVS GMO Add-in
4. Remove Geomedia Objects
5. Close the Add or Remove Programswindow
6. In Windows explorer find the folder C:\Program Files\GeoMedia Objects and delete it.
7. The following steps must be performed by a knowledgeable software professional (like an ITengineer) as the tool can damage the machine. It is only necessary if another version ofGeomedia Object from Intergraph needs to be installed (like the one included in an old version
of Phast such as Phast 6.53.1).
a. Start the registry editor
b. Delete the following three entries in the registry:HKEY_CURRENT_USER\Software\Intergraph\Application\Geomedia Objects
HKEY_LOCAL_MACHINE\SOFTWARE\Intergraph\Applications\GeoMedia Objects_06.01
HKEY_LOCAL_MACHINE\SOFTWARE\Intergraph\GeoMedia Objects
c. In the registry editor, browse to the key:HKEY_LOCAL_MACHINE\SOFTWARE\Intergraph\Applications\DefaultJCache
If the key value is set to GeoMedia Objects_06.01, then delete this key
8. Optional additional un-installations. These installations should only be removed if no otherproducts required them since they are generally shared or required by many applications. It is
safer to keep them. You will be prompted for rebooting many times.
a. DNVS License Wizardb. Removing Aladdin HASP4 Install from DNVSc. Remove Sentinel Protection Installer 7.5.0, if it exists
d. Remove Microsoft Report Viewer Redistributable 2008 SP1e. Remove Microsoft SQL Server VSS Write
-
7/22/2019 Phast Risk Installation Notes
35/41
Phast Risk v6.7 Installation Notes 34 Removing Phast Risk
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
f. Remove Microsoft SQL Server 2008 Browserg. Remove Microsoft SQL Server 2008 Native clienth. Remove Microsoft SQL Server 2008i. Remove Microsoft SQL Server 2008 Setup Support File
j. Remove Microsoft Visual C++ 2008 Redistributable
-
7/22/2019 Phast Risk Installation Notes
36/41
Phast Risk v6.7 Installation Notes 35 Known Issues
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
Known Issues
.NET Framework 2.0 required before installing Phast Risk 6.7
If you start the installation on a PC without .NET Framework 2.0 or later being installed, you get the
following error messages while the system checks what components have to be installed.
In this case, please follow the instruction given in the section .NET Framework 2.0 Installation
before proceeding further into the Phast Risk Installation.
Phast and Phast Risk 6.531 incompatibility
Phast and Phast Risk 6.531 use Intergraph Geomedia 4.2 which is not compatible with later versions
of Phast and Phast Risk, including 6.54 and 6.7. The installation process will remove the old version.
This will prevent Phast and Phast Risk 6.531 from working. It is suggested you remove any old
versions of Phast and Phast Risk earlier than version 6.54. Phast and Phast Risk 6.54 compatibility
Phast Risk 6.7 upgrades Intergraph Geomedia from 6.1.2 to 6.1.7. Phast and Phast Risk 6.54 shouldbenefit from the upgrade as various fixes are included in this new version.
Phast and Phast Risk 6.54 and 6.6 compatibility
Phast Risk 6.7 upgrades Intergraph Geomedia from 6.1.2 to 6.1.7. Phast and Phast Risk 6.54 and 6.6
should benefit from the upgrade as various fixes are included in this new version.
SQL Server 2008
Phast Risk installation uses SQL Server 2008 Express. The setup will create the appropriate SQL
Server 2008 Express setting. Express limits the memory size to 1GB of RAM and the database size to4GB and a large study file may produce more than 4GB of data. To increase the limit, you will have to
purchase the full Microsoft SQL Server 2008 product. This has been tested and DNV Software
helpdesk can provide specific settings required by Phast Risk 6.7.
It is possible to use a remote SQL Server however the benefits will be very limited as the data files
lives in the same folder as the study file and the folder is probably not on the SQL Server machine.
This type of environment has not been tested.
Installation timeout
On Microsoft Vista and Windows 7, each installation step triggers a security message similar to:
-
7/22/2019 Phast Risk Installation Notes
37/41
Phast Risk v6.7 Installation Notes 36 Known Issues
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
If this message is not acknowledged by clicking on Yeswithin 90 seconds, the installation will abort
and the following message will appear:
The above picture has the details expanded (by clicking on the button Details>>) and the installer
reports that the installation was cancelled by the user as the security message was not acknowledged.
To continue click on Close.
In this case, you will have to restart the Phast Risk installation. Then the remaining pre-requisites
(required third-party components) will be installed.
Depending on the system, there are up to 16 security messages.
File Permissions and User Rights
Phast Risk 6.7 requires three types of permissions and rights:
System administrator rights for installing the software. This is a temporary requirement toallow the user to install the product. The user account can be assigned to an IT person or a
normal user who is given administrator rights for the duration of the installation. When
running Phast Risk, the user does not need any administrator rights.
'Full Access' to 'Authenticated Users' and 'NETWORK SERVICE' to the Study Folder FilesLocation (by default C:\DNVUser). 'NETWORK SERVICE' is required by SQL Server User
account used by Phast Risk. During the Phast Risk 6.7 installation, the setup program sets the
Study Folder Files Location correctly. However, if your organization has some specific
setting and enforced them, the setting may be overwritten and Phast Risk 6.7 will fail while
processing a study file. Please contact DNV software helpdesk if you experience such a
problem.
By default, the Phast Risk Admin Files are installed in the All Users profile (C:\Documentsand Settings\All Users\Application Data\DNVS\PHAST_6_7_0_371\Admin\), so any user of
the PC can read and write (with an appropriate Phast Risks Administrator password) those
files. However, if the files are installed separately (using the Phast/Phast Risk Admin Files
-
7/22/2019 Phast Risk Installation Notes
38/41
Phast Risk v6.7 Installation Notes 37 Known Issues
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
installation), Phast Risk users may be prevented from writing to them in Phast Risk Admin
mode, in this case please contact your IT helpdesk for permission.
Study Folder Files Location
Phast Risk 6.7 stores data in the Study Folder Files Location using SQL Server 2008 Express. SQL
Server does not support compressed disk or folder. Network or USB drives may cause failure if thedrive becomes disconnected while in use. It is recommended to use local, uncompressed disk and
folder as the Study Folder Files Location.
Installation while the User is not connected to the OrganizationNetwork
Installation may fail if the user is working offline. In this case the installation will produce the
following error or similar message:
There are various workarounds to overcome this issue:
Connect to your network. If you are at your office, connecting to the missing network resourceby joining your domain/network (plugging in an Ethernet cable or switching on your wireless
connection) or if you are not in the office, using a Virtual Private Network connection over the
internet will overcome the issue.
In some cases making offline files available can overcome the issue as it simulates thepresence of the network resource when you are not connected to the network. To switch on
Offline Files capability start Windows File Explorer and choose the menu item Tools > Folder
Options > Offline Files. Check the box Enable Offline Files.
You can then proceed with the Phast Risk installation. It is advisable to switch the unused
offline files capability off again once Phast Risk is installed if it is not your usual practice.
Virtualisation
There are several issues running Phast Risk on a virtualization operating system (Citrix, VMware,
Virtual PC, XP Mode under Windows 7, etc). Phast Risk 6.7 is not supported under any operating
system virtualization.
USB Security Key inserted before Phast Risk is Installed
If the USB Security Key, sometimes called dongle, is inserted into the USB port before Phast Risk isinstalled, this will cause the key not to be recognized. After Phast Risk installation is completed the
-
7/22/2019 Phast Risk Installation Notes
39/41
Phast Risk v6.7 Installation Notes 38 Known Issues
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
USB Security Key can be inserted into the USB port and it will be automatically recognized by the
system. Failure to follow this process would require the driver currently used by the operating system
to be uninstalled. Please contact DNV Software Helpdesk for advice.
Request a License without Administrator Rights
The Licence Wizard requires the user to have Administrator Rights on the local machine. This sectionexplains how to retrieve the data needed to issuing a license from the DNV Software license
administrator.
These steps use the Windows Command Prompt utility, if you are not familiar with the tool, please
seek for assistance from your IT Helpdesk.
Start the Windows Command Prompt
Start the Command Prompt utility: from the
Windows Start menu:
click on Run
in the field, type cmd.exe
click on OK
A new window with aDOS promptwill appear.
Run three commands
At the DOS prompt, type the following commands (including the double quotes)
C:\Program Files\DNV\FLEXlm\Utils\lmhostid.exe ether >info1.txtC:\Program Files\DNV\FLEXlm\Utils\lmhostid.exe flexid >info2.txt
-
7/22/2019 Phast Risk Installation Notes
40/41
Phast Risk v6.7 Installation Notes 39 Known Issues
2011 DET NORSKE VERITAS
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means,
including photocopying and recording, without the prior consent of DET NORSKE VERITAS
IPCONFIG /all >info3.txt
DIR info*.txt
Please note the path returned by the last command as this is the location of the text files you are
creating. Here is the typical outcome on Windows XP SP3. The command to type are in the red box
and the path in the green box, that is C:\Documents and Settings\Astrator
Email the information to DNV Software License
Administror
Browse to the Directory reported as above to findthe three text files you created (info1.txt,
info2.txt, info3.txt) and email the three text files
to [email protected]. In the email, also
include any details such as your name, the name
of the product you intend to run and its version.
This concludes the license request workaround.
Add a License File without Administrator RightsThe Licence Wizard requires the user to have Administrator Rights on the local machine. This section
explains how to add a licence file to your machine.
The workaround will only work for Security Key2 license. For Standalone
2or Floating
2 licenses the
License Wizard must be used.
Using the Windows File Explorer, please copy the licence file in the following folder (depending on
your version of Windows):
Windows XP:
C:\Documents and Settings\All Users\Application Data\DNVS\Licences
Windows Vista and Windows 7 (File Explorer may not display the folder ProgramData):
C:\ProgramData\DNVS\Licences
-
7/22/2019 Phast Risk Installation Notes
41/41
Phast Risk v6.7 Installation Notes 40 Known Issues
For versions of Phast older than version 6.7, for any version of Windows (the folder may haveto be created first.)
C:\FLEXlm
This concludes the workaround for importing a license file without administrator rights.
All installation must be started from either setup.exe or index.htm
Phast Risk 6.7 depends on several third-party components. They are normally installed using the
Phast Risk 6.7 link from the install page in the DVD browser system. Running directly from the DVD
the msi file \PhastRisk_installation\DNV Software Phast Risk 6.7.msi will lead to a failure. Some
checks are made to prevent this from happening.