Page 1/2

PETG for 3D Printing 834Q

Fast, tough and easy to use

Up to 20% higher printing speeds compared to PLA Fast cooling and low-temp PETG, designed to extrude at ~230C Printed filament yields a rigid, high-tensile part Odourless printing with crystal transparency and no warping

Size Specifications[a] Units Test Method

Nominal Diameter 1.75 / 2.85 mm -

Diameter Tolerances 0.05 / 0.15 mm -

Mechanical Properties Units Test Method

Tensile Modulus 1880 60 MPa ISO 527-1

Tensile Stress at Yield n. a. MPa ISO 527-1

Tensile Stress at Break 37.4 2 MPa ISO 527-1

Tensile Strain at Yield n. a. % ISO 527-1

Tensile Strain at Break 3.0 0.6 % ISO 527-1

Flexural Strength 81 3 MPa ISO 178

Flexural Modulus 1740 270 MPa ISO 178

Izod Impact Strength, notched 2.1 0.5 kJ/m2 ISO 180 [a]Property measured using the filament. All remaining properties are measured using 3D test specimens.

Page 2/2

Thermal Properties Units Test Method

Melt Mass-Flow Rate 7.0 0.5 g/10min ISO 1133

Heat Deflection (HDT) at 0.455 MPa 74 3 C ISO 75

Heat Deflection (HDT) at 1.820 MPa 69 2 C ISO 75

Glass Transition, 1Hz 84 – 85 C ISO 6721

Coefficient of Thermal Expansion 8 x 10-5 m/mC -

Melting Temperature[a] 145 – 155 C ISO 11357

VICAT Softening Temperature 71 3 C ISO 306

Printer Settings[b] Units Test Method

Extruder Temperature 215 – 230 C -

Plate Temperature 0 – 60 C -

Ventilation 0 – 50 % - [b]Recommended settings. For the best results when printing with Filkemp filaments, carefully read the 3D printer manufacturer’s instructions manual.

Additional Information

Regulatory Compliance: REACH / RoHs

Spool weight: 1kg (2.2lbs)

All filaments are supplied in vacuum-sealed packaging containing a desiccant bag

Other sizes, spool weight and packaging are available upon request Revision: 01/2018

Disclaimer: This information is based on our current knowledge of raw materials and the manufacturing process and refers to the above mentioned products when leaving Filkemp. It is solely the customer’s responsibility to determine if the product and information in this document are appropriate for the customer’s end use. Responsibility for the use, storage, handling and disposal of the products herein is that of the purchaser or end user.