Page 1 Revised: 09/20/13P.1741ADA

Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.

Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com

Fixture May Show Some Available Options

Please visit www.acorneng.com for most current specifications.

®Penal-Ware 1741ADA Series

Penal-Pak Wall Shower - ADA Compliant

Penal-Pak Wall Shower - ADA Compliant

Shower is designed to be installed on a finished wall and serviced from an accessible pipe chase. Optional Wall Sleeve or Metal Template is recommended for all installations for required wall openings. The fixture is fabricated from 14 gage, type 304 stainless steel and the exterior has a satin finish. Unit conforms with ANSI, UFAS and ADA requirements for accessibility. Compliance is subject to the interpretation and requirements of the local code authority.

Shower Head. There are two heads provided; a conventional, vandal resistant shower head and a hand held shower with a 60” long, stainless steel reinforced hose, vacuum breaker, quick disconnect and mounting bracket. In lieu of hand held shower, unit is optionally available with suffix option -FH Fixed Head mounted at 48” A.F.F.

Optional Valves (ADA compliant) available include Electronic metering options and Air-Control metering. Air-Control valves are pneumatically operated using atmospheric air. Pushbutton is vandal-resistant and requires less than 5 pounds to activate valve. Valve is metering type with non-hold open feature. Timing is adjustable from 5 to 60 seconds on Air-control valve and adjustable from 1 second to 1 hour on electronic valve. Valve includes a 2.5 GPM flow control and can be remotely located up to 10 feet from the operating pushbutton. Valve conforms with lead free requirements of NSF61, Section 9, 1997.

Regularly furnished items include an ADA compliant control valve, a fixed shower head, a hand shower with quick disconnect and mounting bracket, a recessed soap dish, and mounting hardware for walls up to 8" thick. Refer to accessibility standards and guidelines for additional installation requirements.

GUIDE SPECIFICATION

Provide and install an Acorn Penal-Ware, ADA Compliant Wall Shower (specify model number and options). Shower panel shall be fabricated from 14 gage, type 304 stainless steel and shall have a satin finish. Exposed trim shall be chrome-plated brass. Fixture shall be furnished with a fixed shower head, a hand shower with vacuum breaker, quick disconnect and mounting bracket. Shower shall be provided with an ADA compliant control valve. A stainless steel recessed soap dish shall be factory welded in place. Fixture shall be provided with necessary fasteners for proper installation. Units to conform with ANSI, UFAS and ADA requirements for accessibility.

1741ADA-03-M

Page 2

Selection Summary

Model No. & Option___________________________

Quantity____________________________________

Approved for Manufacturing

Company__________________Title______________

Signature_________________ Date______________

Important: Installation instructions and current rough-in are furnished with each fixture. Do not rough in without certified dimensions.Dimensions are subject to manufacturer’s tolerance of plus or minus 1/4" and change without notice. Acorn assumes no responsibility for use of void or superseded data. © Copyright 2006 Acorn Engineering Company

PRODUCT OPTIONS (Must Specify)

-CSH Conical Shower Head-EG Enviro-Glaze, Specify Color: __________-F Flow Control, Must Specify: (Showerhead Only)

o 1.4 GPM o 1.6 GPM o 2.0 GPM-FH Fixed Head at 48" in Lieu of Hand Shower-LRD Less Recessed Soap Dish-MT Metal Template (Only 1 Required Per Project)-PBH Hemispherical Pushbutton-PYY Penal Showerhead w/Lockable Universal Ball

Joint-PZZ Penal Showerhead w/Lockable Up/Down Ball

Joint-SSV Space Saver Showerhead 20 Degree Discharge-SW Wall Sleeve-TF 120VAC To 24VAC Transformer (MVC option

only)

o -BRS Brass Body Valveq q o

q q q q q

q

q q q

P.1741ADA

®Penal-Ware : 1741ADA Penal-Pak Wall Shower -ADA Compliant

WALL THICKNESS AND TYPE (Must Specify)Thickness: ___________ Type: _____________

MODEL NUMBER AND OPTIONS SELECTION:BASE MODEL NUMBER

-1741- ADA Penal-Pak Wall Shower - ADA Compliant

VALVE SELECTION (Must Specify)-03-M Air-Control, Single Temperature, Metering-04-M Air-Control, H & C, Metering-EVS1 Electronic Valve System - Single Temp-EVS2 Electronic Valve System - Hot & Cold-MVC1 Time-Trol - Single Temp-MVC2 Time-Trol - Hot & Cold

q

q q q q q q o o

-PPZ1 Programmable Piezo Button - Single Temp -PPZ2 Programmable Piezo Button - Hot & Cold

Please visit www.acorneng.com for most current specifications.

Acorn Engineering Company • 15125 Proctor Avenue • P.O. Box 3527 • City of Industry, CA 91744-0527 U.S.A.

Tel: (800) 488-8999 • (626) 336-4561 • Fax: (626) 961-2200 • www.acorneng.com • E-mail: info@acorneng.com

Revised: 09/20/13

8"(203)

334"

(95)

12"(305)

42"(1067)

38" A.F.F.(965)

48" A.F.F.(1219)

72" A.F.F.(1829)

1741-ADA-03-M

1. Optional -03-M Air-Control Valve

3. Hand Shower Mounting Bracket2. Penal Shower Head

NOTES:

6. Optional -RD Recessed Soap Dish

7. Shower Panel8. Wall Mounting Hardware

2

4

5

3

7 8

4. Hand Shower with Quick Disconnect

6

1

5. Control Valve Pushbuttons

30°

12"(305)

10"(254)