pelco pmcq14a 14-inch color quad monitor manual

Download Pelco PMCQ14A 14-Inch Color Quad Monitor Manual

Post on 27-Nov-2014

241 views

Category:

Documents

10 download

Embed Size (px)

TRANSCRIPT

CH1 CH2 CH3 CH4

PMCQ14A 14-Inch Color Quad Monitor Installation/ Operation Manual C1970M-A (7/01)

Pelco 3500 Pelco Way, Clovis CA 93612-5699 USA www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel +1 (559) 292-1981 or FAX +1 (559) 348-1120

CONTENTSSection Page

IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION ................................................................................................................... 4 FEATURES ................................................................................................................ 4 OVERVIEW ................................................................................................................ 4 INSTALLATION .................................................................................................................. 6 PROGRAMMING ............................................................................................................... 7 CHECK OUT ...................................................................................................................... 8 OPERATION ...................................................................................................................... 8 DISPLAY .................................................................................................................... 8 INTERCOM ............................................................................................................... 10 ALARM ...................................................................................................................... 11 VCR RECORD/PLAYBACK ...................................................................................... 11 TECHNICAL SPECIFICATIONS ....................................................................................... 14 REGULATORY NOTICES ......................................................................................... 15 WARRANTY AND RETURN INFORMATION .................................................................... 16

LIST OF ILLUSTRATIONSFigure 1 2 3 4 5 6 7 8 9 Page Typical Application Using PMCQ14A Monitor .................................................... 5 Examples of Camera Locations ......................................................................... 5 Monitor Connections .......................................................................................... 6 Control Locations on Front of Monitor ................................................................ 7 Display Selections .............................................................................................. 9 Intercom Activities on Screen ............................................................................ 10 Alarm Activities on Screen ................................................................................ 11 Monitor Back Panel Controls and Connections ................................................ 12 Monitor Controls ................................................................................................ 13

LIST OF TABLESTable A B C D E F G Page Programming Menu ........................................................................................... 7 Check-Out Procedure ........................................................................................ 8 Display Functions ............................................................................................... 8 Intercom Function ............................................................................................. 10 Alarm Function .................................................................................................. 11 Back Panel Reference Key ............................................................................... 12 Front Panel Reference Key ............................................................................... 13

2

Pelco Manual C1970M-A (7/01)

IMPORTANT SAFEGUARDS AND WARNINGSPrior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and conform to all local codes. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture. Only use replacement parts recommended by Pelco. When used with the CCQ1400A-4 camera with audio, the PCMQ14A Color Quad Monitor is capable of being used as a two-way intercom system. Applications other than the intended use as a two-way intercom communications system may violate Federal wiretapping laws. No systems may be used to monitor audio without the expressed knowledge of the parties being monitored. A warning notice must be posted and plainly visible at all entrances to public and private premises utilizing the PMCQ14A/CCQ1400A-4 intercom system. Pelco assumes no liability for equipment being used for purposes other than the intended use as a two-way intercom system. Do not attempt to disassemble the unit. Do not remove screws or cover. There are no user-serviceable parts inside. Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on or near materials that may hinder air circulation. Do not install any of the system parts where they will be exposed to water, excessive dust or excessive vibration.

2.

3. 4.

5. 6. 7. 8.

9.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

CAUTION: RISK OF ELECTRIC SHOCK.

DO NOT OPEN. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

Pelco Manual C1970M-A (7/01)

3

DESCRIPTIONFEATURES Observe up to Four Camera Images at Once or in Sequence Programmable Dwell Time for Each Camera During Sequence Mode Picture-In-Picture (PIP) View in Horizontal or Vertical Format 2X Digital Zoom and Freeze Functions Alarm Inputs for Each Camera Channel on Back of Monitor Alarm Causes Channel to Come up with Full View Programmable TTL Compatible Alarm Output on Monitor Video Loss Detector Sets Alarm Beep 4 Camera Inputs Through Mini-DIN or BNC Connectors Looping Outputs When Mini-DIN Connectors Are Used Common Video Output Through MONITOR OUT BNC Connector Impedance Switches for Channel and Common Video Output Terminations

OVERVIEWThe PMCQ14A Color Quad Monitor is the ideal choice when you need an easy-to-install video surveillance system for viewing up to four areas at once. Cameras of your choice or alternate video sources (such as VCRs) can be used. All monitor controls are located on the front of the unit. An observer can change the display to zoom in on a single camera with the touch of a button. Camera ID is displayed on the screen and is easily programmed. In addition to its video capabilities, the monitor offers alarm and intercom features. The alarm lets you install a call button near the camera so that a person on camera can get the attention of the observer. The monitor has audio intercom capabilities that function only when CCQ1400A-4 cameras are used. VCR connections are provided for recording cameras. Alarm connections are provided on the back of the monitor. These connections serve as inputs to connect alarm contacts directly to the monitor when using a camera without alarm inputs. If not used as inputs, they can be used as outputs to provide a TTL compatible interface for operating alarm annunciators or other notification devices. Connections are easily made via push-in type wire connectors. An alarm trigger output is also provided on the push-in type wire connector. This can be used to automatically start a VCR when an alarm occurs.

4

Pelco Manual C1970M-A (7/01)

EH3500IMAGEPAK OUTDOOR W/ HEATER & DEFROSTER

CH1 MCS4-2POWER SUPPLY 24 VAC TO ALL INDOOR CAMERAS

DF5 PENDANTDOMEPAK INDOOR

WCS1-4POWER SUPPLY

CH1 CH2 CH3 CH4

CH2 CH3

CH4 PCMQ14A EH100IMAGEPAK INDOOR

DF5 IN-CEILINGDOMEPAK INDOOR

TLR2024VIDEO CASSETTE RECORDER

Figure 1. Typical Application Using PMCQ14A Monitor

CH 1 BACK DOOR

CH 2 FRONT DOOR

CH 1 CH 2 CH 3 CH 4

CH 3 STOCK ROOM

CH 4 CASH CHECKOUT

Figure 2. Examples of Camera Locations

Pelco Manual C1970M-A (7/01)

5

INSTALLATION1. Place monitor on a stable surface such as a shelf or desk top. Connect cameras or alternate video sources to the desired channel IN/OUT connectors on the back of the monitor (refer to Figure 3). Set impedance switches to the 75-ohm position (refer to Figure 3). If alarm contacts are used, run wires from the contacts to the monitor and connect at the push-in connector on the back (refer to Figure 3).BE SURE THERE IS AIR SPACE BELOW MONITOR. DO NOT BLOCK AIR SPACE BY PLACING MONITOR ON A SOFT SURFACE OR BY COUNTERSINKING SPOTS FOR THE FEET.

NOTE: The mini-DIN (IN) connectors are for use with CCQ1400A-4 cameras.

2.

3.

4.

5.

If used, connect a VCR to the VIDEO/AUDIO IN/OUT jacks and/or MONITOR OUT connector, depending on the type of connectors on the VCR (refer to Figure 3). If MONITOR OUT is not used for a VCR, another monitor can be connected. If MONITOR OUT has equipment connected to it, set the impedance switch to HI. If MONITOR OUT is unused, set the switch to 75 ohms. Plug in the power cord (refer to Figure 3). Turn on MAIN switch on the back of the