peb profile (1)

7/22/2019 PEB Profile (1)

http://slidepdf.com/reader/full/peb-profile-1 1/11

----------------------------------------------------------------------------------------------------------------------------

About Us

We at Udhav Industries Limited are engaged in creating contemporary building solutions for

industrial, commercial and domestic sectors. Our product range includes pre-fabricated huts and

shelters, pre-engineered steel buildings, cold roll formed metal sections, and roofing and wall

cladding solutions among others. We strive to provide complete structural solutions under one roof.

We have in-house facility for cold rolled forming for making ‘Z’, ‘C’, ‘U’, ‘W’, ‘L’, ‘T’ and

pressed steel door and window sections and for profiling of sheets for roofing, wall-cladding,

flashing, girts, ridge etc. We have a full fledged work shop for manufacturing columns, pillars, rafters,trusses and various other parts for pre-engineered buildings, portal truss systems and pre-fabricated

huts.

Our promoters MTI have been engaged in manufacture and supplies to the prestigious

defence and paramilitary forces of the country for the last two decades. Some of our most valued

customers include esteemed government bodies like Border Security Force, Central Industrial Security

Force, Assam Rifles and Eastern Command. They have been supplying complete structural solutions

to these bodies for many years now.

Select Clientele

Continental Engines, Gurgaon

Gayatri Automation, Alwar

Shiv Shakti Minerals, Alwar

Shape Engineering Co., Haridwar

Jai Ganesh Engineering, Haridwar

Anchor Panasonic, Roorkee

Victora Auto Pvt. Ltd., Haridwar

Oberoi Motors, Roorkee/Haridwar/Dehradun

Jay Ace Technologies, Roorkee

Recliners India Ltd., Roorkee

Naulakha Surfactants, Roorkee

Era Infra’s Haridwar - Dehradun Highway Project

Dabur Research & Training Centre, Rudrapur

TTK Prestige Co., Roorkee

PG International, Roorkee

Osho Packaging, Roorkee

Himadri Chemicals, Kolkatta

SKN Bentex, Roorkee

Apple Formulations, Roorkee

Bentex Control & Switch Gear, Roorkee

Spectro Research Lab Ventures, Kanpur

Nanda and Nanda Associates, Haridwar



----------------------------------------------------------------------------------------------------------------------------

Pre-engineered Buildings at UIL

Pre-engineered buildings have become the

choice of construction in the industrial sector. They

take one-third time in setting up as compared to

conventional construction and offer far more

flexibility in design and construction.

At UIL, our team of experts is engaged in

design, fabrication & erection of world class pre-

engineered buildings. Highest quality standards are

ensured in procurement of steel and utmost care is

taken in ensuring structural strength and soundness.

The U I L Advantage

Efficient use of steel to ensure minimum

practical structural weight

Complete PEB Solution including all sub-

structures and accessories

Adherence to International Standards

and SpecificationsOutstanding structural design

U I L

Pre-Engineered

Buildings



----------------------------------------------------------------------------------------------------------------------------

Select Projects

Shape Engineering, Haridwar Jai Ganesh Engineering, Haridwar

Gayatri Automation, Alwar Dabur Research & Training

Centre, Rudrapur

Victora Auto, Haridwar Oberoi Motors, Dehradun



----------------------------------------------------------------------------------------------------------------------------

Pre-engineered Buildings at UIL



----------------------------------------------------------------------------------------------------------------------------

Primary Members

Primary members consisting of columns and rafters are the main load

carrying members of the structural system. They are also called Built-Up

Members and are usually an "I" shape, made from individual flat plates

welded together.

High strength HR Plates are used in their fabrication. Built up sections are

made from these plates in automatic beam welding line by submerged

Arc welding (SAW).

Specification Conformance: ASTM A572M

Secondary Members

Secondary structural members are used to support the wall and roof panels and consist of purlins, girts, eave

struts, flange brace etc. They share part of the longitudinal loads that are applied on the building such as wind

and earthquake loads. They also provide lateral bracing to the compression flanges of the main frame members

thereby increasing frame capacity.

Purlins and girts are cold rolled formed light gage Z sections varying in depth from 180 to 300 mm and in thickness

from 1.5 mm to 2.5 mm as per design requirements. All primary connection fasteners will be with high strength

bolts conforming to the physical specification to ASTM A570M and IS: 2062



----------------------------------------------------------------------------------------------------------------------------

Design Choices

Clear Span: Maximum practical width = 80 m Multiple Gable: Maximum practical module width = 80 m

Single Slope: Maximum practical width = 50 m Multi-Span: Maximum practical module width = 70 m

Multi Level Steel Buildings

For multi-level buildings, an intermediate mezzanine floor is included in our design. It

consists of columns, beams, joists, deck panels and edge trims to receive reinforced

concrete.

Steel Staircase

Mezzanine Floor



----------------------------------------------------------------------------------------------------------------------------

Decking Sheet for Mezzanine Floor

Mezzanine deck panel is intended to carry only the dead load of

the wet concrete; it acts as a permanent shuttering.

Fascia

Vertical Fascia Centre Curved Fascia

Bottom Curved Fascia Top and Bottom Fascia



----------------------------------------------------------------------------------------------------------------------------

Crane Beam and Brackets

Crane beam to support an overhead or under hung bridge crane is part of many

of our steel buildings. Brackets for structural support are welded to the primary

building frame to permit attachment of the crane beam. Crane rails, beam hoist

and bridge are excluded from our supply.

Choice of Crane Systems

Top Running Crane Under-hung Crane

Monorail Crane



----------------------------------------------------------------------------------------------------------------------------

Roofing and Wall Cladding

For roofing and wall cladding, superior quality metal sheets are used. Our sheets are 26G TCT Hi Rib of 550 MPA Steel .

Our sheeting solutions ensure high strength, better over lap, weather tightness, corrosion resistance, low maintenance

cost and good aesthetics. Options available:

o Bare Galvalume Sheets

o Pre-painted Galvalume (PPGL) Sheets

o Pre-painted Galvanized (PPGI) Sheets

o PUF Insulated Panels

Galvalume steel is a zinc aluminum coated steel offering high corrosion resistance. This alloy coating com comprises

of 55% aluminum 43% zinc and 1.5% silicon. This Coating offers a superior barrio protection against varied

atmospheric conditions. The coating class is AZ-150 as per AS : 1397, which means 150gms/m2 minimum coating

mass total of both sides. Galvalume sheets are available in tensile strengths of 300, 345 & 550 MPa

Galvanized steel comprises of galvanized zinc coating over mild steel of minimum coating mass 120 gms / m2

as per IS 277 and IS 14246 in tensile strength of min. 240 MPa.

PUF Insulated Panels

The outer and inner metal skins of Insulated Panels conform to the same

specifications as above. In addition, Insulated Panels have factory injected

polyurethane foam (PUF) for thermal insulation.

Building Sub-Structures and Accessories

Canopy

Canopies and roof extensions are part of many PEB designs. They

enhance utility as well as aesthetic value of the building. They are

made using hot rolled or built-up members. They are beyond the

steel lines of the building and located below the eave.



----------------------------------------------------------------------------------------------------------------------------

Gutters & Down Spout Pipe

One of the most essential accessories in any PEB design gutters and down spout pipes ensure movement of water over

the building surface. They are produced from the same material as wall and roof sheeting.

Standard Wall Trimmings

Wall Trimmings including corner trim, eave trim, gable trim etc. are produced from the same material as wall and roof

sheeting:

Ridge Vent

We offer the option of ventilation at the ridge line through the use of a

Ridge vent.



----------------------------------------------------------------------------------------------------------------------------

Contact Us

Head Office: 58/74-76, Birhana Road, Kanpur.

Works: Khasra No. 138, Raipur, Bhagwanpur, Roorkee.

Contact no.: +91 98390 35937

Email: [email protected]

For more information on us, please visit our website www.udhavind.com

Select Products

Pre-fabricated Huts and Shelters Pre-engineered Steel Buildings

False Ceiling Solutions Roofing and Wall Cladding Solutions

peb profile (1)

Documents