pdsn9660 v800r001 bill format-20040305-b-1.0

7/30/2019 PDSN9660 V800R001 Bill Format-20040305-B-1.0

1/7

Document No. Document Version Security levelDocument Center, Research &Management Dept., Huawei Technologies

Co., Ltd.

Product Name: PDSN9660 Total pages: 7

PDSN9660 V800R001 Bill Format

(For internal use only)

Prepared by: PDSN9660 Product Group Date: 2004/03/05

Reviewed by: Date:Reviewed by: Date:

Approved by: Date:

Document version:

Huawei Technologies Co., Ltd.

All rights reversed


2/7

PDSN9660 V800R001 Bill Format For internal use

2004-03-05 All rights reserve Page 2 of 7

Revision RecordDate Document revision version Description Author

2004/03/05 V1.0 Created Wang Haiying


3/7



Table of Contents

1 Original bill file header.........................................................................................................2

2 Original bill file body ............................................................................................................2


4/7



PDSN9660 V800R001 Bill Format

Keywords: PDSN, Bill Format

Abstract: The description of PDSN9660 bill format.

List of abbreviations:

PDSN9660 HUAWEI PDSN9600 Packet Data Serving Node


5/7



The Huawei bill use the file interface, the file including the header and body two

parts.

1 Original bill file header

Sequence Field Name Max

Length

Remark

1. Record Type CHAR (2) First Record = 012. File Sequence CHAR (4) Increase form 0001, return

to 0001 after Max3. File Version CHAR (2) 004. Generate Date CHAR (8) YYYYMMDD5. First Session Date CHAR (8) YYYYMMDD6. First Session Time CHAR (6) HHMMSS7. Last Session Date CHAR (8) YYYYMMDD8. Last Session Time CHAR (6) HHMMSS

9. Bill Record Number CHAR (10) Right alignment, fill 0 in left10. New Line CHAR (1) \r\n

2 Original bill file body

Including extended field, the description of each field is shown below.

Sequence Field

Name

Max

Length

Remark

1. Sequence CHAR (10) Increased only sequence2. Accounting

Status TypeCHAR (10) 1=accounting start; 2=accounting stop;

3=interim update3. MSID CHAR (15) IMSI4. IP Address CHAR (15) e.g.: 172.1.12.3

5. NAI CHAR (64) The user account6. Account SessionID

CHAR (8) ID for a session

7. Correlation ID CHAR (8) ID for a PPP8. Session

Continue

CHAR (10) Flag for if the current Accounting Stop is

the end of a connection: 0=stop;1=continue. Only exists in accounting stopbill

9. MIP HomeAgent

CHAR (15) IP for HA

10. PDSN/FAAddress

CHAR (15) PDSN address for normal user or the VPNgateway address for VPN services.

11. Serving PCF CHAR (15) PCF IP address


6/7



12. BSID CHAR (12) SID+NID+BSC ID13. User Zone CHAR (10) User Zone14. Forward Mux

Option

CHAR (10) Forward multiplex option

15. Reverse MuxOption

CHAR (10) Reverse multiplex option

16. Service Option CHAR (10) 33 for CDMA 1X Service17. Forward Traffic

TypeCHAR (10) Forward traffic type

There are two channels:0=Primary, 1=Secondary

18. Reverse TrafficType

CHAR (10) Reverse traffic typeThere are two channels:0=Primary, 1=Secondary

19. FundamentalFrame Size

CHAR (10) Fundamental frame size0=Unknown, 1=5, 2=20ms

20. Forward

FundamentalRC

CHAR (10) Forward fundamental resource class

21. ReverseFundamentalRC

CHAR (10) Reverse fundamental resource class

22. IP Technology CHAR (10) IP technology type1=Simple IP, 2=Mobile IP

23. CompulsoryTunnel Indicator

CHAR (10) Compulsory tunnel type0=no tunnel; 1=unsafe tunnel; 2=safetytunnel

24. ReleaseIndicator

CHAR (10) The reason for sending Accounting stop

25. DCCH FrameFormat

CHAR (20) DCCH frame format

26. Data OctetCount(Terminating)

CHAR (10) Count of data octets received by the user

27. Data OctetCount(Originating)

CHAR (10) Count of data octets sent by the user

28. Bad PPP FrameCount,

CHAR (10) The frame dropped by PDSN.

29. Event Time CHAR (10) Start time for accounting start file, end timefor accounting stop file, it is the second

from Jan, 1st 197030. Active Time CHAR (10) Session time (seconds) provided by PCF31. Number of

ActiveTransitions

CHAR (10) Times status transitions from domain

status to active status during a PPPconnection

32. SDB OctetCount(Terminating)

CHAR (10) Count of Short Data Burst (SDB) octetsreceived by the user

33. SDB OctetCount(Originating)

CHAR (10) Count of Short Data Burst (SDB) octetssent by the user


7/7



34. Number ofSDBs(Terminating)

CHAR (10) Times of user receiving Short Data Burst(SDB) octets

35. Number of

SDBs(Originating)

CHAR (10) Times of user sending Short Data Burst

(SDB) octets

36. Number ofHDLC layerbytes received

CHAR (10) Count of HDLC layer bytes received byPDSN

37. In-Bound MobileIP SignalingOctet Count

CHAR (10) Mobile IP signaling traffic. Count ofinbound mobile IP signaling octetsreceived by the user

38. Outbound

Mobile IPSignaling OctetCount

CHAR (10) Mobile IP signaling traffic. Count of

inbound mobile IP signaling octets sent bythe user

39. IP Quality ofService (QOS)

CHAR (10) IP Quality of Service (QoS). Default: BE(best effort)

40. Airlink Quality ofService (QOS)

CHAR (10) Airlink Quality of Service (QoS)

41. Airlink RecordType

CHAR (10) 1=initialconnection;2=activate;3=deactivate;4=SDBrecord

42. R-P Session ID CHAR (10) R-P Session ID43. Airlink

SequenceNumber

CHAR (10) Airlink sequence number

44. Mobile

Originated /MobileTerminatedIndicator

CHAR (10) 0=start; 1=stop

45. Roaming Flag CHAR (1) 0: local; 1: visit; 2: home

46. Reserved CHAR (10) Reserved47. Reserved CHAR (10) Reserved48. Accounting

ContainerNot Fixed

49. New Line 1 \n

pdsn9660 v800r001 bill format-20040305-b-1.0

Documents