tzorc gpp project - tbzrefinery gpp project doc. no.: ... api 598 valve inspection and testing api...

TZORC GPP Project

Doc. No.:TZ-0000-PI-SP-4001 Owner Job No.: 85-27

Rev.: 03 Contractor Job No.:

EX1198/I9802-01/TGC126

Piping Material Specification for Off-

Site Unit of 77

Piping Material Specification for Off-Site Unit

03 18.09.2010 R For Approval SH.SH M.E. M.E A.BO.

02 10.02.2008 AI For Information S.T. M.E. GH.M. A.BO. 01 03.02.2008 R For Approval S.T. M.E. GH.M. A.BO. 00 15.12.2007 F For Approval M.Sh. S.T. N.S.A. A.BO.

Rev. Date Stage Description PRE’D CHK’D APP’D AUT’D

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

Revision Index

Rev. 00 01 02 03 Rev. 00 01 02 03 Rev. 00 01 02 03 Sheet Sheet Sheet

1 38 75 2 39 76 3 40 77 4 41 5 42 6 43 7 44 8 45 9 46 10 47 11 48 12 49 13 50 14 51 15 52 16 53 17 54 18 55 X 19 56 20 57 21 58 22 59 23 60 X 24 61 25 62 26 63 27 64 28 65 29 66 30 67 31 68 32 69 33 70 34 71 35 72 36 73 37 74

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

TABLE OF CONTENTS PAGE 1.0 Preamble 4 2.0 Ambient Conditions 4 3.0 Definitions and Terminology 4 4.0 References 4 5.0 Abbreviations 6 6.0 General Notes 9 7.0 Pipe Classes 12

Pipe Class: F1101 13 Pipe Class: F1102 18 Pipe Class: F1103 23 Pipe Class: F1106 28 Pipe Class: F1151 33 Pipe Class: F1155 38 Pipe Class: F1157 43 Pipe Class: F1158 46 Pipe Class: F1163 50 Pipe Class: F1164 55 Pipe Class: F3114 60 Pipe Class: F3152 65 Pipe Class: F6153 70 Pipe Class: J3138 74

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

1.0 Preamble

This job specification covers the minimum requirements for material classification of process and utility piping systems used for Off-Site Unit in Tabriz Refinery Project.

2.0 Ambient Conditions

Site Ambient conditions shall be according to project specification No.: TZ-0000-PR-SP-0002.

3.0 Definitions and Terminology

Employer: Tabriz Oil Refining Company (TZORC) Contractor: The Consortium that is made at EIED, SEI and TANAVOB Purchaser: Means TZORC in cases where this specification is part of a direct purchase by TZORC, and means the Contractor in cases where this specification is part of Contract Documents Vendor: The manufacturer’s from which the equipment/material is to be purchased.

4.0 References

Design shall conform to the requirements specified in the following Codes and Standards. Referred Codes in this specification are the latest edition, unless otherwise stated in the item description. ASME ASME B1.1 Unified Inch Screw Threads. ASME B1.20.1 Pipe Threads ASME B16.3 Malleable Iron threaded fittings, class 150 and 300 ASME B16.5 Pipe flanges and flanged fittings ASME B16.9 Factory made wrought Steel butt welding fittings ASME B16.10 Face to face and end-to-end dimension of valves ASME B16.11 Forged Steel fitting, socket welding and threaded ASME B16.20 Metallic gaskets for pipe flanges ASME B16.21 Non-metallic flat gaskets for pipe flanges ASME B16.25 Butt welding ends

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

ASME B16.34 Valves-flanged, threaded and butt-welding end ASME B16.36 Orifice Flanges ASME B16.47 Large Diameter Steel Flange (NPS 26 through NPS 60) ASME B18.2.1 Square and hexagon bolts and screws ASME B18.2.2 Square and hexagon nuts ASME B31.3 Process piping ASME B36.10M Welded and Seamless Wrought Steel pipe ASME B36.19M Stainless Steel Pipe ASME B46.1 Surface texture

API API 5L Specification for line pipe API 590 Steel line Blanks API 594 Wafer check valves API 598 Valve Inspection and Testing API 599 Metal Plug Valves, Flanged and Welding ends API 600 Steel gate valves, flanged and butt welding ends API 602 Compact Steel gate valves API 609 Butterfly valve, Lug-type and wafer-type API 6D Specification for pipeline valves (Gate, Plug, Ball and check

valves) API 6FA Fire test for valves ASTM As designated for the individual line classes according to material selected. BS BS 1868 Steel check valves flanged and butt welding ends BS 1873 Steel globe and globe stop and check valves, flanged &

butt-welding ends BS 5146 Inspection and test of steel valves for the Petroleum,

Petrochemical and allied industries. BS 5351 Steel ball valves for the petroleum, petrochemical and

allied industries BS 5352 Steel wedge gate, globe and check valves BS 5353 Steel Plug Valves

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

BS 6755 Testing of valves - Part 2

MSS MSS SP-6 Standard finishes for contact faces of pipe flanges and

connecting-end flanges of valves and fittings. MSS SP-25 Standard Marking System for Valves, Fittings, Flanges

and Unions MSS SP-43 Wrought Stainless steel Butt-welding Fittings MSS SP-44 Steel Pipe Line Flanges MSS SP-75 Specification for high test wrought welding fittings. MSS SP-80 Bronze gate, globe angle and check valves MSS SP-83 Pipe steel unions, socket welding and threaded MSS SP-95 Swage nipples and Bull plugs MSS SP-97 Forged carbon steel branch outlet fittings; socket

welding, threaded and butt-welding ends. Project Specification TZ-0000-PI-INX-4001 Piping Material Index for Off-Site Unit TZ-0000-PI-SP-0008 Job Specification for Piping Material Purchase

Pipe TZ-0000-PI-SP-0009 Job Specification for Piping Material Purchase

Flanges and Gaskets TZ-0000-PI-SP-0010 Job Specification for Piping Material Purchase

Fittings TZ-0000-PI-SP-0011 Job Specification for Piping Material Purchase

Valves TZ-0000-PI-SP-0015 Job Specification for Identification of Piping

Material TZ-0000-PI-SP-0016 Underground Piping Protection

5.0 ABBREVIATIONS

Abbreviations used in specifications and line classes are as follows: AARH API

Arithmetic Average Roughness Height American Petroleum Institute

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

ASME BB BBE BC BE BLE BLE/PSE BS BW CA CAF CONC COND CPLG CR CS C & W DEG DIA DIM DWG ECC ERW EQ ES FLG FLGD GALV GO GR HEX HORIZ ID INST INT IS ISO LC LO LR MAX MIN

American Society of Mechanical Engineers Bolted Bonnet Bevel Both End Bolted Cover Bevel End Bevel Large End Bevel Large End/Plain Small End British Standard Butt Welding Corrosion Allowance Compressed Asbestos Filler Concentric Condensate Coupling Chromium Carbon Steel Coated & Wrapped Degree Diameter Dimension Drawing Eccentric Electric Resistance Welded Equal Extended Stem Flange Flanged Galvanized Gear Operate (ed) (er) Grade Hexagonal Horizontal Inside Diameter Instrument Internal Inside Screw International Standardization Organization Lock Closed Lock Open Long Radius Maximum Minimum

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

MM MOV MPT MSS NACE NPS NPT OD OS & Y PBE POE/FNPT PE P & ID RED RENEWABLE SR REV RF RF-SF RJ RT SB SC SCH SCRD SMLS SO SPEC SPW SQ SR

Millimeter Motor Operated Valve Magnetic Particle Test Manufacturers Standardization Society National association of Corrosion Engineers Nominal Pipe Size American Standard Taper Pipe Thread Outside Diameter Outside Screw And Yoke Plain both end Plain one end / Female threaded one end Plain End Piping And Instrument Diagram Reducer Renewable Seat Ring Revision Raised Face Raised Face Smooth finish Ring Joint Radiographic Test Screwed Bonnet Screwed Cover Schedule Screwed Seamless Slip-On Specification Spiral Wound Square Short Radius

SS STD SW THD THK TBE TEMP TLE TOE TP TSE T&C

Stainless Steel Standard Socket Weld Threaded Thickness Threaded Both End Temperature Threaded Large End Threaded One End Type Threaded Small End Threaded & Coupled

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

U WB WOL WN WT XS XXS

Unified Inch Screw Threaded Welded Bonnet Weldolet Weld Neck Weight Extra Strong Double Extra Strong

6.0 General Notes

6.1 DESIGN CONDITIONS

The pressure and temperature given in each piping class are the design limitations and shall not be exceeded. All piping components and pipe wall thickness shown in each piping class are based on these limits.

6.2 PIPE 6.2.1 Pipes shall conform to project specification No.: TZ-0000-PI-SP-0008. 6.2.2 Pipe wall thickness calculation shall be carried out according to ASME B31.3. 6.2.3 Carbon steel pipe sizes 1 1/4”, 2 1/2”, 3 1/2”, 5”, 7”, 9”, 22”& 26” shall not be

used except for connection to the EQUIPMENT. Pipe size 2 1/2” may be used for fire hydrants and/or control valves connections.

6.2.4 All buried steel piping shall be coated and wrapped according to specification

for Underground Piping Protection, doc. No. TZ-0000-PI-SP-0016. 6.2.5 All Pipes shall be seamless. (Except for above 24” in cooling water lines,

which shall be welded pipe DSAW, and shall undergo 100% radiographic test in pipe’s fabrication at vendor’s shop.)

6.2.6 All pipes shall be supplied in the following nominal lengths in accordance with

table 11 of API 5L: - 1/2" to 6" Nominal diameter: single random length of approximately 6

meters (Min. 5.33m length). - 8" and larger: double random length of approximately 12 meters (Min.

10.67m length), without intermediate welding. 6.2.7 Galvanized pipes shall be threaded both ends. Each length shall be fitted with

two galvanized carbon steel straight coupling 3000# FNPT.

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

6.2.8 When Galvanizing specified, pipes shall be coated with zinc inside & outside by hot-dipped process to ASTM A53.

6.3 VALVES 6.3.1 Valves shall conform to project specification No.: TZ-0000-PI-SP-0011. 6.3.2 The face-to-face and end-to-end dimensions of steel and high alloy valves

shall conform to ASME B16.10. 6.3.3 End connection of flanged valves shall be in accordance with ASME B16.5

(24” and below) and ASME B16.47 Series ‘B’ (26” through 60”). 6.3.4 Dimensions and tolerances of end connections of socket weld and threaded

end valves shall be in accordance with ASME B16.11. 6.3.5 Valves shall be gear operated for the following types and sizes:

Gate Valves: Class 150,14” & larger Class 300,14” & larger

Class 600,12” & larger Globe Valves: Class 150,8” & larger Class 300,8” & larger

Class 600,6” & larger Butterfly Valves: Class 150,6” & larger Class 300,6” & larger Plug Valves:

Class 150,6” & larger Class 300,6” & larger Ball Valves: Class 150,8” & larger

6.3.6 All check valves may be gear mounted in the vertical (upward flow) or

horizontal position unless limited by the item description in the individual line class.

6.4 FITTINGS 6.4.1 Fittings shall conform to project specification No.: TZ-0000-PI-SP-0010.

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

6.4.2 Socket weld fittings shall normally be used for nominal diameter 1 1/2” and smaller; butt-weld fittings for nominal diameter 2” and larger.

6.4.3 Butt-welded fittings shall have the same wall thickness as the connected pipe. 6.4.4 Butt weld ends shall be bevelled to ASME B16.25; internal or external

threaded ends shall be in accordance with ASME B1.20.1 and Socket weld ends shall be in accordance with ASME B16.11.

6.4.5 Galvanized Flanges & Fittings shall be coated with zinc inside & outside by

hot-dipped process to ASTM A153, after all forming and heat treatment have been completed.

6.5 BRANCHES

Branch connections shall be made in accordance with the attached table for each pipe class. When the type is not defined, the branch connection shall be calculated in accordance with ASME B31.3

6.6 FLANGE 6.6.1 Flanges shall conform to project specification No.: TZ-0000-PI-SP-0009. 6.6.2 Steel flanges dimensions for all ratings shall conform to ASME B16.5 (24” and

below) and ASME B16.47 Series ‘B’ (26” through 60”). 6.6.3 According to ASME B16.5 surface finishing shall be as follows:

- 125 AARH to 250 AARH (3.2 to 6.3 micrometers) for raised face smooth

finish flanges (RF-SF).

6.7 THREADS 6.7.1 Threads for threaded pipes, fittings, flanges and valves shall be in

accordance with ASME B1.20.1 taper threads. 6.7.2 SEAL WELDING OF THREADED CONNECTIONS:

Up to 200°C threaded joints shall be made with 1” width PTFE joining tape (or after OWNER’S approval as per manufacturer standard). Above 200°C threaded joints shall be seal welded with a full strength fillet weld.

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

All threaded joints irrespective of pressure and temperature in lines carrying toxic fluid shall be seal welded with a full strength fillet weld. Seal welding of threaded joints is required for un-valved vents and drain after completion of hydro test. Galvanized piping shall not be seal welded. Where seal welding of threaded joints is to be used, all following shall be met: - The materials shall be weld able. - The joints shall be made up clean and without use of any tape or

compound. - The weld shall cover all exposed threads but shall not exceed 10mm fillet. - The weld procedure shall not cause damage to the threaded fitting. - No other satisfactory means of jointing are available.

Welding shall be carried out by qualified welders. 6.8 Gaskets

6.8.1 Gaskets shall conform to project specification No.: TZ-0000-PI-SP-0009.

6.8.2 Gaskets shall be Asbestos free material. 6.8.3 Metallic gaskets, double jacketed corrugated and spiral wound gaskets shall

be in accordance with ASME B16.20 for sizes up to 24”. 6.8.4 Ring Joint gaskets shall be in accordance with ASME B16.20. 6.8.5 Gaskets non-standardized by ASME or API shall be in accordance with

manufacturer’s standard however, OWNER’s prior APPROVAL is required, case-by-case.

6.8.6 Full-face gaskets shall be furnished with bolt holes punched. 6.8.7 Unless otherwise noted, lap joint construction shall be considered

equivalent to RF flanges. 7.0 PIPE CLASSES

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

BASE MATERIAL CS C.A. 1.3 mm DESIGN CODE ASME B31.3 RATING & FACING CL150, RF-SF

TEMP. ºC -25/38 50 85

PIPE CLASS:

F1101 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE NAPHTHA (P), GASOLINE (P), BENZENE (P), BENZENE FREE REFORMATE (P), FUEL GAS (P), BOILER FEED WATER (BW), CLOSE DRAIN (P), NITROGEN (UN)

ITEM SIZE RANGE

INCH DESCRIPTION NOTES COMM. CODE

PIPE API 5L GR. B SMLS PER ASME B36.10M 1/2 1 1/2 SCH 80 PE PPPSP1508AZ_S8 2 6 SCH 40 BE PPPSB1508AZ_S4 8 14 SCH 30 BE PPPSB1508AZ_S3 FITTINGS 1/2 1 1/2 ASTM A105, SOCKET WELD, CL 3000, PER ASME B16.11 90 DEG ELBOW PJEQFS1801JZ_L3 45 DEG ELBOW PJEPFS1801JZ_L3 TEE EQUAL PJTSFS1801JZ_L3 TEE REDUCED PJTRFS1801JZ_L3 CAP PJKFFS1801JZ_L3 COUPLING (FULL) PJCDFS1801JZ_L3 COUPLING (HALF) PJCSFS1801JZ_L3 SOCKOLET PER MSS SP-97 PJOOFS1801OZ_L3 ELBOLET PJOEFS1801JZ_L3 UNION INTERAL SEAT TYPE, PER MSS SP 83 PJUMFS1801UZ_L3 1/2 1 1/2 ASTM A105, THREADED NPT, CL 3000 PER ASME B16.11 (2) PLUG HEX HEAD, MNPT PJLHFM1801JZ_L3 COUPLING (HALF), FNPT PJCSFN1801JZ_L3 CAP, FNPT PJKFFN1801JZ_L3 2 14 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9

SCH SAME AS PIPE (6)

90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ CAP PJKESB1601LZ NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B, SMLS, LENGTH 100mm SCH 160, POE/TOE (2) PJNLSZ1502EZ_A6 SCH 160, TBE (2) PJNLSM1502EZ_A6 1/2 1 1/2 SWAGE NIPPLE CONC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSCSP1801SZ_S8 SCH 160, PLE/TSE (2) PJSCSG1801SZ_A6 SCH 160, TBE (2) PJSCSM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2)

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1101 SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSCSC1601SZ_S4/S8 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S4/S8 FLANGES ASTM A105, CL150, RF-SF PER ASME B16.5 BORE SAME

AS PIPE

1/2 1 1/2 SOCKET WELD PFFS62R1801NZ 2 14 WELDING NECK PFFW62R1801NZ 12 14 WELDING NECK FLANGE WITH TWO JACK SCREWED PFFW62R1801NJ 1/2 14 BLIND FLANGE PFFB62R1801NZ 2 3 BLIND FLANGE WITH ONE HOLE (5) PFFB62R1801NW

ASTM A105, CL300, RF-SF PER ASME B16.5 BORE SAME AS PIPE

1/2 1 1/2 SOCKET WELD (4) PFFS63R1801NZ 2 14 WELDING NECK (4) PFFW63R1801NZ 12 14 WELDING NECK FLANGE WITH TWO JACK SCREWED (4) PFFW63R1801NJ 1/2 14 BLIND FLANGE (4) PFFB63R1801NZ


2 14 ORIFICE WELDING NECK PFFF63R18010Z PRESSURE BLIND ASTM A515 Gr. 65, CL 150, RF ASME B16.5/API 590 (3)

1/2 12 SPECTACLE BLIND PBBG62R1702AZ 14 SPACER & BLIND PBBF62R1702AZ GASKET TYPE: SPIRAL WOUND WITH INNER AND OUTER RING MATERIAL: SS 304 WINDING & INNER RING / GRAPHITE

FILLER / CS OUTER RING THICKNESS: 4.5 MM STD: ASME B16.20 1/2 14 RATING: CL150 PGGSD62A6XDZ 1/2 14 RATING: CL300 (4) PGGSD63A6XDZ BOLT&NUT 1/2 14 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1101 OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 14 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 12 OPERATION: HAND OPERATED PVVGB62R0301BCAN0Z 14 GEAR OPERATED PVVGB62R0301BCAN5Z VALVE TYPE: GLOBE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800, SW PVVLB68S0101ACAJ0Z CL 800, SW-NPT (2) PVVLB68D0101ACAJ0Z 2 12 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: BS 1873 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y 2 6 OPERATION: HAND OPERATED PVVLB62R0308BCAK0Z 8 12 GEAR OPERATED PVVLB62R0308BCAK5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE

COVER FIXING: BOLTED

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1101 STD: BS 5352 SPECIAL REQUIREMENTS: PISTON TYPE END CONNECTION: CL 800, SW 2 14 BODY: ASTM A216 GR. WCB PVVCS62R0301NCAL0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE


STD: BS 1868 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SWING TYPE STRAINER 2 Y TYPE STRAINER PMSYA62R02DCAFEZ 3 14 T TYPE STRAINER PMSTA62R02DCAFEZ BODY: ASTM A216 GR.WCB SCREEN/ PERFORATED PLATE: S.S 316L STD: API 602 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: BOLTED COVER, WITH DRAIN 3 14 T TYPE STRAINER PMSTA62B02DCAFEZ BODY: ASTM A216 GR.WCB SCREEN/ PERFORATED PLATE: S.S 316L STD: API 602 END CONNECTION: BW, CL150 SPECIAL REQUIREMENTS: BOLTED COVER, WITH DRAIN

PARTICULAR NOTES:

1. Pressure/Temperature rating values shown on “piping material specification” reflect ASME STD and are valid for flanges and valves only, within the limits of piping class.

2. To be used for threaded joints and where threaded outlet required.

3. For dimensions refer to piping STD. DWG No. TZ-0000-PI-SD-0008 & 9.

4. The rating of 300# shall be used in this pipe class for instrument connections only.

5. These blind flanges with one hole shall be used for instrument connections only. The size of hole shall be considered acc. to piping MTO.

6. The code for SCH / THK for each size of fittings shall be added at the end of commodity code same as pipe.

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1101

BRANCH TABLE

14 SI 12 SI SI 10 SI SI SI 8 SI SI SI SI 6 SI SI SI SI SI 4 SI SI SI SI SI SI 3 SI SI SI SI SI SI SI 2 SI SI SI SI SI SI SI SI

1 1/2 M M M M M M S S TE 1 M M M M M M M S TR TE

3/4 M M M M M M M M TR TR TE 1/2 M M M M M M M M TR TR TR TE

BR

AN

CH

SIZ

E (in

ch)

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2

HEADER SIZE (inch) LEGEND: S: SOCKOLET M: HALF COUPLING TE: TEE EQUAL TR: TEE REDUCED SI: STUB-IN Note: Connections pipe to pipe (stub in) shall be designed and checked of additional

reinforcement, if any, in accordance with ASME B31.3.

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85

PIPE CLASS:

F1102 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE BENZENE FREE REFORMATE (P), GASOLINE (P), FLARE (BD), NITROGEN (UN)

ITEM SIZE RANGE





TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


AS PIPE









TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77




TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1102 STD: BS 5352 END CONNECTION: CL 800, SW

SPECIAL REQUIREMENTS: PISTON TYPE

2 14 BODY: ASTM A216 GR. WCB PVVCS62R0301NCAL0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE



PARTICULAR NOTES:







TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1102

BRANCH TABLE




BR

AN

CH

SIZ

E (in

ch)

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85

PIPE CLASS:

F1103 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE CAUSTIC (P)

ITEM SIZE RANGE





TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


AS PIPE









TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77




TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1103 STD: BS 5352 END CONNECTION: CL 800, SW





PARTICULAR NOTES:







TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1103

BRANCH TABLE




BR

AN

CH

SIZ

E (in

ch)

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2

HEADER SIZE (inch) LEGEND: S: SOCKOLET M: HALF COUPLING TE: TEE EQUAL TR: TEE REDUCED SI: STUB-IN

Note: Connections pipe to pipe (stub in) shall be designed and checked of additional


TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85

PIPE CLASS:

F1106 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE SOUR WATER (P)

ITEM SIZE RANGE


PIPE API 5L GR. B SMLS PER ASME B36.10M 1/2 1 1/2 SCH 80 PE PPPSP1508AZ_S8 2 14 SCH XS BE PPPSB1508AZ_XS FITTINGS 1/2 1 1/2 ASTM A105, SOCKET WELD, CL 3000, PER ASME B16.11 90 DEG ELBOW PJEQFS1801JZ_L3 45 DEG ELBOW PJEPFS1801JZ_L3 TEE EQUAL PJTSFS1801JZ_L3 TEE REDUCED PJTRFS1801JZ_L3 CAP PJKFFS1801JZ_L3 COUPLING (FULL) PJCDFS1801JZ_L3 COUPLING (HALF) PJCSFS1801JZ_L3 SOCKOLET PER MSS SP-97 PJOOFS1801OZ_L3 ELBOLET PJOEFS1801JZ_L3 UNION INTERAL SEAT TYPE, PER MSS SP 83 PJUMFS1801UZ_L3 1/2 1 1/2 ASTM A105, THREADED NPT, CL 3000 PER ASME B16.11 (2) PLUG HEX HEAD, MNPT PJLHFM1801JZ_L3 COUPLING (HALF), FNPT PJCSFN1801JZ_L3 CAP, FNPT PJKFFN1801JZ_L3 2 14 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9


90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ CAP PJKESB1601LZ NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B, SMLS, LENGTH 100mm SCH 160, POE/TOE (2) PJNLSZ1502EZ_A6 SCH 160, TBE (2) PJNLSM1502EZ_A6 1/2 1 1/2 SWAGE NIPPLE CONC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSCSP1801SZ_S8 SCH 160, PLE/TSE (2) PJSCSG1801SZ_A6 SCH 160, TBE (2) PJSCSM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 80 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSCSC1601SZ_S8/S8

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1106 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 80 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S8/S8 FLANGES ASTM A105, CL150, RF-SF PER ASME B16.5 BORE SAME

AS PIPE 1/2 1 1/2 SOCKET WELD PFFS62R1801NZ 2 14 WELDING NECK PFFW62R1801NZ 12 14 WELDING NECK FLANGE WITH TWO JACK SCREWED PFFW62R1801NJ 1/2 14 BLIND FLANGE PFFB62R1801NZ 2 3 BLIND FLANGE WITH ONE HOLE (5) PFFB62R1801NW







NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: MONEL SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1106 SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 14 BODY: ASTM A216 GR. WCB TRIM: MONEL SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 12 OPERATION: HAND OPERATED PVVGB62R0301BCAN0Z 14 GEAR OPERATED PVVGB62R0301BCAN5Z VALVE TYPE: GLOBE 1/2 1 1/2 BODY: ASTM A105 TRIM: MONEL SEAT: STELLITED RENEWABLE BONNET: BOLTED OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800, SW PVVLB68S0101ACAJ0Z CL 800, SW-NPT (2) PVVLB68D0101ACAJ0Z 2 12 BODY: ASTM A216 GR. WCB TRIM: MONEL SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: BS 1873 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y 2 6 OPERATION: HAND OPERATED PVVLB62R0308BCAK0Z 8 12 GEAR OPERATED PVVLB62R0308BCAK5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: MONEL SEAT: STELLITED RENEWABLE


STD: BS 5352

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1106

END CONNECTION: CL 800, SW SPECIAL REQUIREMENTS: PISTON TYPE

2 14 BODY: ASTM A216 GR. WCB PVVCS62R0301NCAL0Z TRIM: MONEL SEAT: STELLITED RENEWABLE



PARTICULAR NOTES:







TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1106

BRANCH TABLE




BR

AN

CH

SIZ

E (in

ch)

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC 25 50 85

PIPE CLASS:

F1151 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE FIRE WATER (FW) *

ITEM SIZE RANGE


PIPE API 5L GR. B SMLS PER ASME B36.10M 1/2 1 1/2 SCH 80 PE PPPSP1508AZ_S8 2 6 SCH 40 BE PPPSB1508AZ_S4 8 12 SCH 30 BE PPPSB1508AZ_S3 14 SCH 20 BE PPPSB1508AZ_S2 FITTINGS 1/2 1 1/2 ASTM A105, SOCKET WELD, CL 3000, PER ASME B16.11 90 DEG ELBOW PJEQFS1801JZ_L3 45 DEG ELBOW PJEPFS1801JZ_L3 TEE EQUAL PJTSFS1801JZ_L3 TEE REDUCED PJTRFS1801JZ_L3 CAP PJKFFS1801JZ_L3 COUPLING (FULL) PJCDFS1801JZ_L3 COUPLING (HALF) PJCSFS1801JZ_L3 SOCKOLET PER MSS SP-97 PJOOFS1801OZ_L3 ELBOLET PJOEFS1801JZ_L3 UNION INTERAL SEAT TYPE, PER MSS SP 83 PJUMFS1801UZ_L3 1/2 1 1/2 ASTM A105, THREADED NPT, CL 3000 PER ASME B16.11 (2) PLUG HEX HEAD, MNPT PJLHFM1801JZ_L3 COUPLING (HALF), FNPT PJCSFN1801JZ_L3 CAP, FNPT PJKFFN1801JZ_L3 2 14 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9


90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ CAP PJKESB1601LZ NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B, SMLS, LENGTH 100mm SCH 160, POE/TOE (2) PJNLSZ1502EZ_A6 SCH 160, TBE (2) PJNLSM1502EZ_A6 1/2 1 1/2 SWAGE NIPPLE CONC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSCSP1801SZ_S8 SCH 160, PLE/TSE (2) PJSCSG1801SZ_A6 SCH 160, TBE (2) PJSCSM1801SZ_A6

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1151 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSCSC1601SZ_S4/S8 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S4/S8 FLANGES ASTM A105, CL150, RF-SF PER ASME B16.5 BORE SAME

AS PIPE 1/2 1 1/2 SOCKET WELD PFFS62R1801NZ 2 14 WELDING NECK PFFW62R1801NZ 12 14 WELDING NECK FLANGE WITH TWO JACK SCREWED PFFW62R1801NJ 1/2 14 BLIND FLANGE PFFB62R1801NZ 2 3 BLIND FLANGE WITH ONE HOLE (5) PFFB62R1801NW PRESSURE BLIND ASTM A515 Gr. 65, CL 150, RF ASME B16.5/API 590 (3)

1/2 12 SPECTACLE BLIND PBBG62R1702AZ 14 SPACER & BLIND PBBF62R1702AZ GASKET 1/2 14 TYPE: SPIRAL WOUND WITH INNER AND OUTER RING PGGSD62A6XDZ

MATERIAL: SS 304 WINDING & INNER RING / GRAPHITE FILLER / CS OUTER RING

THICKNESS: 4.5 MM STD: ASME B16.20 RATING: CL150 BOLT&NUT 1/2 14 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1151 2 14 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 12 OPERATION: HAND OPERATED PVVGB62R0301BCAN0Z 14 GEAR OPERATED PVVGB62R0301BCAN5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE


STD: BS 5352 END CONNECTION: CL 800, SW





TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PARTICULAR NOTES:







* All underground pipes shall be coated and wrapped acc. to project

specification for UG piping protection (Doc. No.: TZ-0000-PI-SP-0016).

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1151

BRANCH TABLE




BR

AN

CH

SIZ

E (in

ch)

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC 25 50 85

PIPE CLASS:

F1155 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE PLANT WATER (IW) *

ITEM SIZE RANGE


PIPE API 5L GR. B SMLS PER ASME B36.10M 1/2 1 1/2 SCH 80 PE PPPSP1508AZ_S8 2 6 SCH 40 BE PPPSB1508AZ_S4 FITTINGS 1/2 1 1/2 ASTM A105, SOCKET WELD, CL 3000, PER ASME B16.11 90 DEG ELBOW PJEQFS1801JZ_L3 45 DEG ELBOW PJEPFS1801JZ_L3 TEE EQUAL PJTSFS1801JZ_L3 TEE REDUCED PJTRFS1801JZ_L3 CAP PJKFFS1801JZ_L3 COUPLING (FULL) PJCDFS1801JZ_L3 COUPLING (HALF) PJCSFS1801JZ_L3 SOCKOLET PER MSS SP-97 PJOOFS1801OZ_L3 ELBOLET PJOEFS1801JZ_L3 UNION INTERAL SEAT TYPE, PER MSS SP 83 PJUMFS1801UZ_L3 1/2 1 1/2 ASTM A105, THREADED NPT, CL 3000 PER ASME B16.11 (2) PLUG HEX HEAD, MNPT PJLHFM1801JZ_L3 COUPLING (HALF), FNPT PJCSFN1801JZ_L3 CAP, FNPT PJKFFN1801JZ_L3 2 6 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


AS PIPE

1/2 1 1/2 SOCKET WELD PFFS62R1801NZ 2 6 WELDING NECK PFFW62R1801NZ 1/2 6 BLIND FLANGE PFFB62R1801NZ 2 3 BLIND FLANGE WITH ONE HOLE (5) PFFB62R1801NW PRESSURE BLIND ASTM A515 Gr. 65, CL 150, RF ASME B16.5/API 590 (3) 1/2 6 SPECTACLE BLIND PBBG62R1702AZ GASKET 1/2 6 TYPE: SPIRAL WOUND WITH INNER AND OUTER RING PGGSD62A6XDZ



NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 6 BODY: ASTM A216 GR. WCB PVVGB62R0301BCAN0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1155 STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y OPERATION: HAND OPERATED VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE







TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PARTICULAR NOTES:







* All underground pipes shall be coated and wrapped acc. to project specification for UG piping protection (Doc. No.: TZ-0000-PI-SP-0016).

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1155

BRANCH TABLE

6 SI 4 SI SI 3 SI SI SI 2 SI SI SI SI

1 1/2 M M S S TE 1 M M M S TR TE

3/4 M M M M TR TR TE

BR

AN

CH

SIZ

E (in

ch)

1/2 M M M M TR TR TR TE 6 4 3 2 1 1/2 1 3/4 1/2



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

BASE MATERIAL GALV. CS C.A. 0 mm DESIGN CODE ASME B31.3 RATING & FACING CL150, RF-SF

TEMP. ºC 25 50 85

PIPE CLASS:

F1157 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE POTABLE WATER (PTW), DRINKING WATER (DW)

ITEM SIZE RANGE

INCH DESCRIPTION NOTE

S COMM. CODE

PIPE API 5L GR. B SMLS GALV. PER ASME B36.10M 1/2 1 1/2 SCH 80 T & C PPPSM1508AZ_S8 2 3 SCH 40 T & C PPPSM1508AZ_S4

FITTINGS 1/2 3 ASTM A105 GALV. THREADED, NPT CL 3000, PER ASME B16.11

90 DEG ELBOW PJEQFN1802JZ_L3 45 DEG ELBOW PJEPFN1802JZ_L3 TEE EQUAL PJTSFN1802JZ_L3 TEE REDUCED PJTRFN1802JZ_L3 PLUG HEX HEAD, MNPT PJLHFM1802JZ_L3 COUPLING (FULL), FNPT PJCDFN1802JZ_L3 UNION AS PER MSS SP 83 PJUMFN1802UZ_L3 CAP, FNPT PJKFFN1802JZ_L3 NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B GALV., SMLS, LENGTH 100mm SCH 160, TBE PJNLSM1504EZ_A6

1/2 3 SWAGE NIPPLE CONC., ASTM A234 GR.WPB GALV. PER MSS SP-95

SCH 160, TBE PJSCSM1607SZ_A6

1/2 3 SWAGE NIPPLE ECC., ASTM A234 GR.WPB GALV. PER MSS SP-95

SCH 160, TBE PJSESM1607SZ_A6

FLANGES ASTM A 105 GALV., CL150, RF-SF, PER ASME B16.5 BORE SAME AS PIPE

1/2 3 THREADED PFFN62R1802NZ 1/2 3 BLIND FLANGE PFFB62R1802NZ PRESSURE BLIND ASTM A285 GR.C, CL 150, RF ASME B16.5/API 590 (3)

1/2 3 SPECTACLE BLIND PBBG62R1723AZ GASKET 1/2 3 TYPE: : FLAT RING RUBBER PGGPR6214YAZ MATERIAL: NONMETALS, ASBESTOST FREE RATING: CL 150 THICKNESS: 1.5 mm STD: ASME B16.21

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1157 BOLT&NUT 1/2 3 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 FNPT PVVGB68N0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 3 BODY: ASTM A216 GR. WCB PVVGB62R0301BCAN0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y OPERATION: HAND OPERATED VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68N0101NCAJ0Z TRIM: 13% CR

SEAT: STELLITED RENEWABLE COVER FIXING: BOLTED

STD: BS 5352 END CONNECTION: CL 800, FNPT




STD: BS 1868 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SWING TYPE

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PARTICULAR NOTES:


2. --------

3. For dimensions refer to piping STD. DWG No. TZ-0000-PI-SD-0008 & 9. 4. -------- 5. --------

PIPE CLASS: F1157

BRANCH TABLE

3 TE

2 TR TE

1 1/2 TR TR TE

1 TR+SN TR TR TE

3/4 TR+SN TR TR TR TE

BR

AN

CH

SIZ

E (in

ch)

1/2 TR+SN TR+SN TR TR TR TE

3 2 11/2 1 3/4 1/2

HEADER SIZE (inch) LEGEND: T: TEE EQUAL TR: TEE REDUCED TR+SN: TEE REDUCED + SWAGE NIPPLE

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

BASE MATERIAL GALV. CS C.A. 0 mm DESIGN CODE ASME B31.3 RATING & FACING CL150, RF-SF

TEMP. ºC -25/38 50 85

PIPE CLASS:

F1158 PRESS. Kg/cm2g 20 19.65 18.54

SERVICE INSTRUMENT AIR (IA)

ITEM SIZE RANGE


PIPE API 5L GR. B SMLS GALV. PER ASME B36.10M 1/2 1 1/2 SCH 80 T & C PPPSM1508AZ_S8 2 SCH 40 T & C PPPSM1508AZ_S4 API 5L GR. B SMLS PER ASME B36.10M 3 4 SCH 40 BE PPPSB1508AZ_S4 FITTINGS 1/2 2 ASTM A105 GALV. THREADED, NPT CL 3000, PER ASME

B16.11

90 DEG ELBOW PJEQFN1802JZ_L3 45 DEG ELBOW PJEPFN1802JZ_L3 TEE EQUAL PJTSFN1802JZ_L3 TEE REDUCED PJTRFN1802JZ_L3 PLUG HEX HEAD, MNPT PJLHFM1802JZ_L3 COUPLING (FULL), FNPT PJCDFN1802JZ_L3 UNION AS PER MSS SP 83 PJUMFN1802UZ_L3 CAP, FNPT PJKFFN1802JZ_L3 3 4 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9

SCH SAME AS PIPE

90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ CAP PJKESB1601LZ NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B GALV., SMLS, LENGTH 100mm SCH 160, TBE PJNLSM1504EZ_A6

1/2 2 SWAGE NIPPLE CONC., ASTM A234 GR.WPB GALV. PER MSS SP-95

SCH 160, TBE PJSCSM1607SZ_A6

1/2 2 SWAGE NIPPLE ECC., ASTM A234 GR.WPB GALV. PER MSS SP-95

SCH 160, TBE PJSESM1607SZ_A6

FLANGES ASTM A 105 GALV., CL150, RF-SF, PER ASME B16.5 BORE SAME AS PIPE

1/2 2 THREADED PFFN62R1802NZ 1/2 2 BLIND FLANGE PFFB62R1802NZ

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1158

ASTM A105 GALV., CL300, RF-SF PER ASME B16.36 BORE SAME AS PIPE

2 ORIFICE WELDING NECK PFFF63R18020Z


3 4 WELDING NECK PFFW62R1801NZ 3 4 BLIND FLANGE PFFB62R1801NZ


3 4 ORIFICE WELDING NECK PFFF63R18010Z PRESSURE BLIND ASTM A515 Gr. 65, CL 150, RF ASME B16.5/API 590 (3) 1/2 4 SPECTACLE BLIND PBBG62R1702AZ GASKET TYPE: : FLAT RING RUBBER MATERIAL: NONMETALS, ASBESTOST FREE THICKNESS: 1.5 mm STD: ASME B16.21 1/2 4 RATING: CL 150 PGGPR6214YAZ 1/2 4 RATING: CL 300 PGGPR6314YAZ BOLT&NUT 1/2 4 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 FNPT PVVGB68N0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 4 BODY: ASTM A216 GR. WCB PVVGB62R0301BCAN0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1158 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y OPERATION: HAND OPERATED VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68N0101NCAJ0Z TRIM: 13% CR


STD: BS 5352 END CONNECTION: CL 800, FNPT




STD: BS 1868 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SWING TYPE VALVE TYPE: BALL 1/2 1 1/2 BODY: ASTM A105 BALL: ASTM A182 GR. F316L SEAT: PTFE RENEWABLE FLOATING TYPE, SIDE ENTRY STD: BS 5351 END CONNECTION: CL 800, FNPT OPERATION: HAND OPERATED 1/2 1 1/2 BORE TYPE: FULL PORT PVVBA68N0101NCAI0Z 1/2 1 1/2 BORE TYPE: REDUCED PORT PVVBD68N0101NCAI0Z 2 4 BODY: ASTM A216 GR. WCB BALL: ASTM A182 GR. F316L SEAT: PTFE, RENEWABLE FLOATING TYPE, SIDE ENTRY STD: API 6D END CONNECTION: FLANGED END CL 150 RF-SF OPERATION: HAND OPERATED 2 4 BORE TYPE: FULL PORT PVVBA62R0301NCAH0Z 2 4 BORE TYPE: REDUCED PORT PVVBD62R0301NCAH0Z

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PARTICULAR NOTES:


2. --------

3. For dimensions refer to piping STD. DWG No. TZ-0000-PI-SD-0008 & 9. 4. The rating of 300# shall be used in this pipe class for instrument connections only. 5. --------

PIPE CLASS: F1158

BRANCH TABLE

4 SI

3 SI SI

2 SI SI TE

1 1/2 M M TR TE

1 M M TR TR TE

3/4 M M TR TR TR TE

BR

AN

CH

SIZ

E (in

ch)

1/2 M M TR+SN TR TR TR TE

4 3 2 11/2 1 3/4 1/2

HEADER SIZE (inch) LEGEND: T: TEE EQUAL TR: TEE REDUCED TR+SN: TEE REDUCED + SWAGE NIPPLE SI: STUB-IN M: HALF COUPLING Note: Connections pipe to pipe (stub in) shall be designed and checked of additional


TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85 100 150 200 232

PIPE CLASS:

F1163 PRESS. Kg/cm2g 20 19.65 18.54 18.03 16.13 14.23 13

SERVICE LOW PRESSURE STEAM (LS), LOW PRESSURE CONDENSATE (LC), COLD CONDENSATE RETURN (C), COLD CONDENSATE SUPPLY (MW), PLANT AIR (UA)

ITEM SIZE RANGE




90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ 2 12 CAP PJKESB1601LZ NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B, SMLS, LENGTH 100mm SCH 160, POE/TOE (2) PJNLSZ1502EZ_A6 SCH 160, TBE (2) PJNLSM1502EZ_A6 1/2 1 1/2 SWAGE NIPPLE CONC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSCSP1801SZ_S8 SCH 160, PLE/TSE (2) PJSCSG1801SZ_A6 SCH 160, TBE (2) PJSCSM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSCSC1601SZ_S4/S8

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


AS PIPE






1/2 12 SPECTACLE BLIND PBBG62R1702AZ GASKET TYPE: SPIRAL WOUND WITH INNER AND OUTER RING MATERIAL: SS 304 WINDING & INNER RING / GRAPHITE

FILLER / CS OUTER RING THICKNESS: 4.5 MM STD: ASME B16.20 1/2 12 RATING: CL150 PGGSD62A6XDZ 1/2 12 RATING: CL300 (4) PGGSD63A6XDZ

BOLT&NUT 1/2 12 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX NUTS PLLS33MZ

MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1163 STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 12 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 12 OPERATION: HAND OPERATED PVVGB62R0301BCAN0Z VALVE TYPE: GLOBE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800, SW PVVLB68S0101ACAJ0Z CL 800, SW-NPT (2) PVVLB68D0101ACAJ0Z 2 12 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: BS 1873 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y 2 6 OPERATION: HAND OPERATED PVVLB62R0308BCAK0Z 8 12 GEAR OPERATED PVVLB62R0308BCAK5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE




2 12 BODY: ASTM A216 GR. WCB PVVCS62R0301NCAL0Z TRIM: 13% CR

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1163



PARTICULAR NOTES:







TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1163

BRANCH TABLE

LEGEND: S: SOCKOLET M: HALF COUPLING TE: TEE EQUAL TR: TEE REDUCED SI: STUB-IN Note 1: Connections pipe to pipe (stub in) shall be designed and checked of additional

reinforcement, if any, in accordance with ASME B31.3. Note 2: Header sizes above 12” are shown only for Tie-In connections.

12 SI SI SI SI SI SI 10 SI SI SI SI SI SI SI 8 SI SI SI SI SI SI SI SI 6 SI SI SI SI SI SI SI SI SI 4 SI SI SI SI SI SI SI SI SI SI 3 SI SI SI SI SI SI SI SI SI SI SI 2 SI SI SI SI SI SI SI SI SI SI SI SI

1 1/2 M M M M M M M M M M S S TE 1 M M M M M M M M M M M S TR TE

3/4 M M M M M M M M M M M M TR TR TE 1/2 M M M M M M M M M M M M TR TR TR TE

24 20 18 16 14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2

BR

AN

CH

SIZ

E (in

ch)

HEADER SIZE (inch)

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85 100 121

PIPE CLASS:

F1164 PRESS. Kg/cm2g 20 19.65 18.54 18.03 17.23

SERVICE COOLING WATER RETURN (CWR) *, COOLING WATER SUPPLY (CWS) *, RAW WATER (RW) , WASH WATER ( WAT )

ITEM SIZE RANGE


PIPE API 5L GR. B SMLS PER ASME B36.10M 1/2 1 1/2 SCH 80 PE PPPSP1508AZ_S8 2 6 SCH 40 BE PPPSB1508AZ_S4 8 12 SCH 30 BE PPPSB1508AZ_S3 14 18 SCH 20 BE PPPSB1508AZ_S2 20 24 7.92 mm BE PPPSB1508AZ_7B API 5L GR. B DSAW PER ASME B36.10M 26 28 SCH 10 BE PPPDB1508AZ_S1 FITTINGS 1/2 1 1/2 ASTM A105, SOCKET WELD, CL 3000, PER ASME B16.11 90 DEG ELBOW PJEQFS1801JZ_L3 45 DEG ELBOW PJEPFS1801JZ_L3 TEE EQUAL PJTSFS1801JZ_L3 TEE REDUCED PJTRFS1801JZ_L3 CAP PJKFFS1801JZ_L3 COUPLING (FULL) PJCDFS1801JZ_L3 COUPLING (HALF) PJCSFS1801JZ_L3 SOCKOLET PER MSS SP-97 PJOOFS1801OZ_L3 ELBOLET PJOEFS1801JZ_L3 UNION INTERAL SEAT TYPE, PER MSS SP 83 PJUMFS1801UZ_L3 1/2 1 1/2 ASTM A105, THREADED NPT, CL 3000 PER ASME B16.11 (2) PLUG HEX HEAD, MNPT PJLHFM1801JZ_L3 COUPLING (HALF), FNPT PJCSFN1801JZ_L3 CAP, FNPT PJKFFN1801JZ_L3 2 24 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9


90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ 2 28 CAP PJKESB1601LZ 26 28 ASTM A234 GR. WPB, BW, WELDED, PER ASME B16.9


90 DEG ELBOW LR PJELWB1603LZ 45 DEG ELBOW LR PJEKWB1603LZ TEE EQUAL PJTSWB1603LZ TEE REDUCED PJTRWB1603LZ REDUCER CONC. PJRCWB1603LZ

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1164 REDUCER ECC. PJREWB1603LZ NIPPLE 1/2 1 1/2 NIPPLE, ASTM A53 GR. B, SMLS, LENGTH 100mm SCH 160, POE/TOE (2) PJNLSZ1502EZ_A6 SCH 160, TBE (2) PJNLSM1502EZ_A6 1/2 1 1/2 SWAGE NIPPLE CONC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSCSP1801SZ_S8 SCH 160, PLE/TSE (2) PJSCSG1801SZ_A6 SCH 160, TBE (2) PJSCSM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSCSC1601SZ_S4/S8 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S4/S8 FLANGES ASTM A105, CL150, RF-SF PER ASME B16.5 BORE SAME

AS PIPE


ASTM A105, CL150, RF-SF PER ASME B16.47 SERIES ‘B’ BORE SAME AS PIPE

26 28 WELDING NECK PFFW62R1801BZ 26 28 WELDING NECK FLANGE WITH TWO JACK SCREWED PFFW62R1801BJ 26 28 BLIND FLANGE PFFB62R1801BZ PRESSURE BLIND ASTM A515 Gr. 65, CL 150, RF ASME B16.5/API 590 (3)

1/2 12 SPECTACLE BLIND PBBG62R1702AZ 14 24 SPACER & BLIND PBBF62R1702AZ GASKET 1/2 28 TYPE: SPIRAL WOUND WITH INNER AND OUTER RING PGGSD62A6XDZ MATERIAL: SS 304 WINDING & INNER RING / GRAPHITE

FILLER / CS OUTER RING THICKNESS: 4.5 MM STD: ASME B16.20 RATING: CL150 BOLT&NUT 1/2 28 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1164 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL150 RF-SF, FLANGED END PVVGB62R0101ACAD0Z 2 28 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 12 OPERATION: HAND OPERATED PVVGB62R0301BCAN0Z 14 28 GEAR OPERATED PVVGB62R0301BCAN5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE






STD: BS 1868 END CONNECTION: FLANGED END, CL150 RF-SF SPECIAL REQUIREMENTS: SWING TYPE VALVE TYPE: BUTTERFLY 3 28 BODY: ASTM A216 GR. WCB TRIM : 316L S.S SEAT: PTFE, RENEWABLE END CONNECTION: LUG TYPE, CL 150 STD: API 609 SPECIAL REQUIREMENTS: EXTENDED STEM 3 4 OPERATION : HAND OPERATED PVVUT62L0365BCAG0E 6 28 : GEAR OPERATED PVVUT62L0365BCAG5E

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PARTICULAR NOTES:




4. --------



* All underground pipes shall be coated and wrapped acc. to project

specification for UG piping protection (Doc. No.: TZ-0000-PI-SP-0016).

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F1164

BRANCH TABLE

LEGEND: S: SOCKOLET M: HALF COUPLING TE: TEE EQUAL TR: TEE REDUCED SI: STUB-IN Note: Connections pipe to pipe (stub in) shall be designed and checked of additional


28 SI 26 SI SI 24 SI SI SI 20 SI SI SI SI 18 SI SI SI SI SI 16 SI SI SI SI SI SI 14 SI SI SI SI SI SI SI 12 SI SI SI SI SI SI SI SI 10 SI SI SI SI SI SI SI SI SI 8 SI SI SI SI SI SI SI SI SI SI 6 SI SI SI SI SI SI SI SI SI SI SI 4 SI SI SI SI SI SI SI SI SI SI SI SI 3 SI SI SI SI SI SI SI SI SI SI SI SI SI 2 SI SI SI SI SI SI SI SI SI SI SI SI SI SI

1 1/2 M M M M M M M M M M M M S S TE 1 M M M M M M M M M M M M M S TR TE

3/4 M M M M M M M M M M M M M M TR TR TE 1/2 M M M M M M M M M M M M M M TR TR TR TE

28 26 24 20 18 16 14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2

BR

AN

CH

SIZ

E (in

ch)

HEADER SIZE (inch)

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85

PIPE CLASS:

F3114 PRESS. Kg/cm2g 52 51 48

SERVICE BENZENE FREE REFORMATE (P), LPG (P) , NATURAL GAS ( NG )

ITEM SIZE RANGE





TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3114 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S4/S8 FLANGES


1/2 1 1/2 SOCKET WELD PFFS63R1801NZ 2 4 WELDING NECK PFFW63R1801NZ 1/2 4 BLIND FLANGE PFFB63R1801NZ 2 3 BLIND FLANGE WITH ONE HOLE (5) PFFB63R1801NW



1/2 4 SPECTACLE BLIND PBBG63R1702AZ GASKET 1/2 4 TYPE: SPIRAL WOUND WITH INNER AND OUTER RING PGGSD63A6XDZ



NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL300 RF-SF, FLANGED END PVVGB63R0101ACAD0Z 2 4 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3114 BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 4 OPERATION: HAND OPERATED PVVGB63R0301BCAN0Z VALVE TYPE: GLOBE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800, SW PVVLB68S0101ACAJ0Z CL 800, SW-NPT (2) PVVLB68D0101ACAJ0Z 2 4 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: BS 1873 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y 2 4 OPERATION: HAND OPERATED PVVLB63R0308BCAK0Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE






STD: BS 1868 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: SWING TYPE STRAINER 2 Y TYPE STRAINER PMSYA63R02DCAFEZ 3 4 T TYPE STRAINER PMSTA63R02DCAFEZ BODY: ASTM A216 GR.WCB SCREEN/ PERFORATED PLATE: S.S 316L

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3114 STD: API 602 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: BOLTED COVER, WITH DRAIN 3 4 T TYPE STRAINER PMSTA63B02DCAFEZ BODY: ASTM A216 GR.WCB SCREEN/ PERFORATED PLATE: S.S 316L STD: API 602 END CONNECTION: BW, CL300 SPECIAL REQUIREMENTS: BOLTED COVER, WITH DRAIN

PARTICULAR NOTES:




4. -----------



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3114

BRANCH TABLE

4 SI 3 SI SI 2 SI SI SI

1 1/2 M S S TE 1 M M S TR TE

3/4 M M M TR TR TE 1/2 M M M TR TR TR TE

BR

AN

CH

SIZ

E (in

ch)

4 3 2 1 1/2 1 3/4 1/2

HEADER SIZE (inch)



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77


TEMP. ºC -25/38 50 85 100 150 200 250 300 350

PIPE CLASS:

F3152 PRESS. Kg/cm2g 52 51 48 47.3 46 44.8 42.6 39.7 37.6

SERVICE MEDIUM PRESSURE STEAM (MS)

ITEM SIZE RANGE





TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3152 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 40 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S4/S8 FLANGES





1/2 10 SPECTACLE BLIND PBBG63R1702AZ 12 14 SPACER & BLIND PBBF63R1702AZ GASKET 1/2 14 TYPE: SPIRAL WOUND WITH INNER AND OUTER RING PGGSD63A6XDZ



NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL300 RF-SF, FLANGED END PVVGB63R0101ACAD0Z

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3152 2 14 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: ASME B16.34 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,







TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3152 STD: BS 1868 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: SWING TYPE STRAINER 2 Y TYPE STRAINER PMSYA63R02DCAFEZ 3 14 T TYPE STRAINER PMSTA63R02DCAFEZ BODY: ASTM A216 GR.WCB SCREEN/ PERFORATED PLATE: S.S 316L STD: API 602 END CONNECTION: FLANGED END, CL300 RF-SF SPECIAL REQUIREMENTS: BOLTED COVER, WITH DRAIN 3 14 T TYPE STRAINER PMSTA63B02DCAFEZ BODY: ASTM A216 GR.WCB SCREEN/ PERFORATED PLATE: S.S 316L STD: API 602 END CONNECTION: BW, CL300 SPECIAL REQUIREMENTS: BOLTED COVER, WITH DRAIN

PARTICULAR NOTES:




4. -----------



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F3152

BRANCH TABLE




BR

AN

CH

SIZ

E (in

ch)

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2 HEADER SIZE (inch)



TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

BASE MATERIAL CS C.A. 1.0 mm

DESIGN CODE ASME B31.3 RATING & FACING CL600, BW TEMP. ºC -25/38 50 85 100 150 200 250 300 350 395

PIPE CLASS:

F6153 PRESS. Kg/cm2g 104 102 96.3 94.6 92.4 89.5 85.25 79.05 75.4 71.55

SERVICE HIGH PRESSURE STEAM (HS)

ITEM SIZE RANGE


PIPE API 5L GR. B SMLS PER ASME B36.10M 1/2 1 1/2 SCH 160 PE PPPSP1508AZ_S8 2 SCH 160 BE PPPSB1508AZ_S8 3 4 SCH 40 BE PPPSB1508AZ_S4 6 7.92 mm BE PPPSB1508AZ_7B 8 9.52 mm BE PPPSB1508AZ_9A 10 11.13 mm BE PPPSB1508AZ_AB 12 14.27 mm BE PPPSB1508AZ_AE 14 15.88 mm BE PPPSB1508AZ_AF FITTINGS 1/2 1 1/2 ASTM A105, SOCKET WELD, CL 6000, PER ASME B16.11 90 DEG ELBOW PJEQFS1801JZ_L6 45 DEG ELBOW PJEPFS1801JZ_L6 TEE EQUAL PJTSFS1801JZ_L6 TEE REDUCED PJTRFS1801JZ_L6 CAP PJKFFS1801JZ_L6 COUPLING (FULL) PJCDFS1801JZ_L6 COUPLING (HALF) PJCSFS1801JZ_L6 SOCKOLET PER MSS SP-97 PJOOFS1801OZ_L6 ELBOLET PJOEFS1801JZ_L6 UNION INTERAL SEAT TYPE, PER MSS SP 83 PJUMFS1801UZ_L6 ASTM A105, BUTT WELD, PER MSS SP-97 2 WELDOLET, SCH 160 PJOOFB1801OZ_A6 3 4 WELDOLET, SCH 40 PJOOFB1801OZ_S4 6 WELDOLET, 7.92 mm PJOOFB1801OZ_7B 8 WELDOLET, 9.52 mm PJOOFB1801OZ_9A 2 14 ASTM A234 GR. WPB, BW, SEAMLESS, PER ASME B16.9


90 DEG ELBOW LR PJELSB1601LZ 45 DEG ELBOW LR PJEKSB1601LZ TEE EQUAL PJTSSB1601LZ TEE REDUCED PJTRSB1601LZ REDUCER CONC. PJRCSB1601LZ REDUCER ECC. PJRESB1601LZ CAP PJKESB1601LZ NIPPLE 1/2 1 1/2 SWAGE NIPPLE CONC., ASTM A105 PER MSS SP-95 SCH 160, PBE PJSCSP1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2)

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F6153 SCH 160 X SCH 160 BLE/PSE, ASTM A234 GR.WPB PJSCSC1601SZ_A6/A6 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 160, PBE PJSESP1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 160 X SCH 160 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_A6/A6 FLANGES ASTM A105, CL600, RF-SF PER ASME B16.5 BORE SAME

AS PIPE

1/2 1 1/2 SOCKET WELD PFFS66R1801NZ 2 14 WELDING NECK PFFW66R1801NZ 12 14 WELDING NECK FLANGE WITH TWO JACK SCREWED PFFW66R1801NJ 1/2 14 BLIND FLANGE PFFB66R1801NZ



1/2 8 SPECTACLE BLIND PBBG66R1702AZ 10 14 SPACER & BLIND PBBF66R1702AZ GASKET 1/2 14 TYPE: SPIRAL WOUND WITH INNER AND OUTER RING PGGSD66A6XDZ MATERIAL: SS 304 WINDING & INNER RING / GRAPHITE

FILLER / CS OUTER RING THICKNESS: 4.5 MM STD: ASME B16.20 RATING: CL600 BOLT&NUT 1/2 14 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: STELLITE SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0105ACAJ0Z 2 14 BODY: ASTM A216 GR. WCB TRIM: STELLITE SEAT: STELLITED RENEWABLE BONNET: BOLTED

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F6153 STD: ASME B16.34, CL600 (SCH SAME AS PIPE) END CONNECTION: BW SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 10 OPERATION: HAND OPERATED PVVGB66B0305BCAN0Z 12 14 GEAR OPERATED PVVGB66B0305BCAN5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0105NCAJ0Z TRIM: STELLITE SEAT: STELLITED RENEWABLE




2 14 BODY: ASTM A216 GR. WCB PVVCS66B0305NCAL0Z TRIM: STELLITE


STD: BS 1868, CL600 (SCH SAME AS PIPE) END CONNECTION: BW SPECIAL REQUIREMENTS: SWING TYPE

PARTICULAR NOTES:


2. -----------


4. -----------

5. -----------


TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: F6153

BRANCH TABLE

LEGEND: TE: TEE EQUAL TR: TEE REDUCED M: HALF COUPLING S: SOCKOLET W: WELDOLET

14 TE 12 TR TE 10 TR TR TE 8 W TR TR TE 6 W W TR TR TE

4 W W W TR TR TE

3 W W W W TR TR TE 2 W W W W W TR TR TE


3/4 M M M M M M M M TR TR TE 1/2 M M M M M M M M TR TR T TE

14 12 10 8 6 4 3 2 1 1/2 1 3/4 1/2

BR

AN

CH

SIZ

E (in

ch)

HEADER SIZE (inch)

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

BASE MATERIAL CS C.A. 1.0 mm DESIGN CODE ASME B31.3 RATING & FACING CL300, RJ

TEMP. ºC -25/38 50 85

PIPE CLASS:

J3138 PRESS. Kg/cm2g 52 51 48

SERVICE HYDROGEN (P)

ITEM SIZE RANGE





TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: J3138 1/2 1 1/2 SWAGE NIPPLE ECC., ASTM A105 PER MSS SP-95 SCH 80, PBE PJSESP1801SZ_S8 SCH 160, PLE/TSE (2) PJSESG1801SZ_A6 SCH 160, TBE (2) PJSESM1801SZ_A6 FOR SIZES 2" X (1/2 ~ 1 1/2) SCH 80 X SCH 80 BLE/PSE, ASTM A234 GR.WPB PJSESC1601SZ_S8/S8 FLANGES ASTM A105, CL300 RJ PER ASME B16.5 BORE SAME AS

PIPE

1/2 1 1/2 SOCKET WELD PFFS63J1801NZ 2 8 WELDING NECK PFFW63J1801NZ 1/2 8 BLIND FLANGE PFFB63J1801NZ

ASTM A105, CL300 RJ PER ASME B16.36 BORE SAME AS PIPE

2 8 ORIFICE WELDING NECK PFFF63J18010Z PRESSURE BLIND ASTM A515 Gr. 65, CL 300, RJ ASME B16.5/API 590 (3) 1/2 8 SPECTACLE BLIND PBBG63J1702AZ GASKET TYPE: OCTAGONAL RING JOINT MATERIAL: 5CR-0.5MO HARDNESS: 130 HRB MAX. STD: ASME B16.20 1/2 8 RATING: CL300 PGGRB6362XSZ BOLT&NUT 1/2 8 STUD BOLT UNIFIED THREADED WITH 2 HEAVY HEX

NUTS PLLS33MZ MATERIAL: ASTM A193 GR. B7 / A194 GR. 2H STD: ASME B18.2.1 & B18.2.2 VALVE TYPE: GATE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: SOLID PLAIN WEDGE, OS&Y BONNET: BOLTED STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800 SW PVVGB68S0101ACAJ0Z CL 800 SW - NPT (2) PVVGB68D0101ACAJ0Z STD: API 602 1/2 1 1/2 END CONNECTION: CL300 RJ, FLANGED END PVVGB63J0101ACAD0Z 2 8 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PIPE CLASS: J3138 STD: ASME B16.34 END CONNECTION: FLANGED END, CL300 RJ SPECIAL REQUIREMENTS: SOLID FLEXIBLE WEDGE,

OS&Y 2 8 OPERATION: HAND OPERATED PVVGB63J0301BCAN0Z VALVE TYPE: GLOBE 1/2 1 1/2 BODY: ASTM A105 TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED OPERATION: HAND OPERATED SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y STD: BS 5352 1/2 1 1/2 END CONNECTION: CL 800, SW PVVLB68S0101ACAJ0Z CL 800, SW-NPT (2) PVVLB68D0101ACAJ0Z 2 12 BODY: ASTM A216 GR. WCB TRIM: 13% CR SEAT: STELLITED RENEWABLE BONNET: BOLTED STD: BS 1873 END CONNECTION: FLANGED END, CL300 RJ SPECIAL REQUIREMENTS: REGULAR DISK, OS&Y 2 6 OPERATION: HAND OPERATED PVVLB63J0308BCAK0Z 8 12 GEAR OPERATED PVVLB63J0308BCAK5Z VALVE TYPE: CHECK 1/2 1 1/2 BODY: ASTM A105 PVVCL68S0101NCAJ0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE




2 8 BODY: ASTM A216 GR. WCB PVVCS63J0301NCAL0Z TRIM: 13% CR SEAT: STELLITED RENEWABLE


STD: BS 1868 END CONNECTION: FLANGED END, CL300 RJ SPECIAL REQUIREMENTS: SWING TYPE

TZORC GPP Project



EX1198/I9802-01/TGC126


Site Unit of 77

PARTICULAR NOTES:




4. -----------

5. -----------


PIPE CLASS: J3138

BRANCH TABLE

8 SI 6 SI SI 4 SI SI SI 3 SI SI SI SI 2 SI SI SI SI SI

1 1/2 M M M S S TE 1 M M M M S TR TE

3/4 M M M M M TR TR TE 1/2 M M M M M TR TR TR TE B

RA

NC

H S

IZE

(inch

)

8 6 4 3 2 1 1/2 1 3/4 1/2

HEADER SIZE (inch) LEGEND: S: SOCKOLET M: HALF COUPLING T: TEE EQUAL TR: TEE REDUCED SI: STUB-IN Note: Connections pipe to pipe (stub in) shall be designed and checked of additional
