pdf retail price list v2 – quicke | en versa-x and implement r… · 2vjdlf 7fstb 94fsjft .je...

Quicke Versa-XSeries - Mid-range Loaders ~ Oringinal Implements

2016

Retail Price List V2.0

Page Recommendations PageB1 Counterweight and Bucket Recommendations C1B2 Implement – Loader Recommendations C2B3 Implements PageB4 Buckets – H, HT, HD, HV, HDV C3B5 Special Buckets – B6 Multipurpose (4 in 1), Hy-Tipping, Grading and Precision B7 Bucket Grabs –

Tractor Make Subframe Multibenne, Powergrab SE, Powergrab BOHCase IH DM and US B8 Forks and Grabs – Claas DM and US B9 Manure fork, Silograb, Silocut SGII and Maxi GrappleDeutz DM B10 Bale Handling – Round bale handling & Square bale handler C7Fendt DM B11 Square bale forks (fixed and hinged), Fiat US B12 Lifting – Pallet Forks,Ford US B12 Lifting – Big Bag Lifter, Single, Dual and Triple Bag

John Deere DM and US B13 Other Implements – Kioti DM B14 3 Point Linkage Hitch, Stone Fork, Silo Split

Kubota DM B15 Skidsteer Implements – Landini DM and US B16 Buckets, Bales Spikes, Pallet Forks and Weld On Hooks

Massey Ferguson DM and US B17 Hook Types - LoaderMcCormick DM B18 Euro, Alo Type 3, Trima and MX Hooks (including dimensions)

New Holland DM B19 Hook Types - TelehandlerSame DM B20TYM DM B21

Valtra DM B22Zetor DM B24 Other Info Page

Helpful InformationWeights of Material Chart, Conversion ChartsContact Info, Carriage Charges and important info Inside back

C11

C8

C9

C11

C12Claas Scorpion, JCB Q-Fit, Manitou, Matbro Pin and Cone, Merlo, Volvo Large BM

CONTENTS

User GuideSpecification Versa-X SeriesLoader Info and PricesHydraulic info, Subframe Codes, Types and WidthsLCS ErgoDrive, EasyDrive, ElectroDrive and Options

C4

C10

Page

Belarus, Hurlimann, Lamborghini, Older Renault, Steyr and Ursus Contact Alo UK

C6

C5Adapters and Tool Carrier OptionsLoader Options and Hydraulic Conversion Kits

2

Ordering Information

1 Take down the Model and type of implement you require

Model example - Silograb 170 (170 = 1.70m wide)

Not a recommended match 2 Make and Model of front loader or handler for some AgLine implements

The loader will NOT fit the tractor. 3 Type of hook system required

8,150 US subframes available only 4 Note the discount code A or B and retail price

US subframes only 5 Email your order to your area manager or to [email protected].

1 Only use the recommendations in this price list.

B1

A guide to using this dealer price list Please read this information carefully

This price list has been designed to ensure choosing a Quicke® Versa-X loader and Original Implement™ and correctly matching them to the tractor in a simple operation.Use the following guidelines to assist you…

Loaders AgLine1 Choose a loader compatible to your requirements from the specification sheet on page 2 and 3 of the

price list.Choose the implement you require

Use the recommendatiins as a guide to chose to correct implement for you tractorSelect the appropriate price sheet for the tractor to which the loader is to be fitted.

Price includes Euro tool carrier, mechanical latching, factory fit 3rd service.

Parallel Loader.

Price includes Euro implement carrier, mechanical latching and factory fit 3rd service .

Select the tractor model from the left-hand column and the loader model along the top row of the sheet. If there is a price specified at the intersection of the column and row, this is a recommended match for the tractor and loader.Four other possibilities should be noted here…

a. No price specified

b. Black Intersection

c. Shaded Intersection

d. Loader format not available

Rear counterweight must be used with front loaders in accordance with regulation EN 12525 (See page C 1)

Should you wish to discuss your choice in more detail, please contact your local Alo UK Area Manager (phone numbers are in the inside back cover) or contact the Alo UK Sales Office direct on 01299 250922, Fax 01299 250944, E-mail: [email protected]

Alo UK price list covers all UK markets excluding Northern Ireland. All prices are in Pounds Sterling.All prices are excluding VAT. We hold a policy of continuous improvement. We reserve the right to change product specification and prices at any time without prior notice.

The price specified at the intersection comprises of the following components:

Subframe. (Also refer to page B4)

Short subframes (price code DS or DM) usually mount from the front bolster of the tractor to the front of the transmission. Long subframes (price code DSX or DMX) run the entire length of the tractor, to the rear axle. Tractor front grille-guards (if applicable) are included in the price. Some ‘DMX’ subframes are priced as ‘DM’. Occasionally additional items (e.g. Exhaust elbows, Power beyond plates etc) may also be required but not necessarily specified; therefore it is important to check with our sales office before calculating the final price. On some occasions, it may be necessary to obtain optional parts from the tractor manufacturer.When a shaded intersection is shown, a US subframe is used

2nd year warranty on Silocut SG covers structure only and does not include any wearing part(s) or hydraulic components.

2Alo UK will not accept any responsibility if damage or failure occurs as a consequence or an incorrect implement to tractor/telehandler combination. I.E. Implement too large for loader/handler, .loader/handler is too large for implement

3

The Machinery Directive 2006/42/EC applies to all material handling machinery and should be interpreted in conjunction with all ROPS (Roll Over Protection Structure) and *FOPS (Falling Object Protection Structure) to ensure operator protection. Please familiarise yourself with Machinery Directive 2006/42/EC.*Do not mount a non-parallel loader to a tractor without FOPS*

Hydraulic Valves

ErgoDrive LCS mono-lever control valve comes in either Open Centre (OC) or Load Sensing (LS) configuration.EasyDrive LCS Code “EY” (EasyDrive) is also available or upgrade to ElectroDrive LCS Pro.Hose kit options may also be available for you tractor.Note – a conversion kit may be required depending on loader/hydraulic combinationFinally, choose from our large selection of implements at the rear of the price list.

4

Ensure the implement is right for your machineEnsure you check that your implement selection is recommended for your loader or the

work to carry out.Non parallel Loader.

Loader Model X21 X31 X41 X51 X26 X36 X46 X56Standard equipment →

Tractor size 40-60 50-70 60-90 70-120 40-60 50-70 60-90 70-120

Lift height to pivot pin m 3.10 3.40 3.70 3.90 3.10 3.40 3.70 3.90

Lift height under level bucket m 2.86 3.16 3.46 3.66 2.86 3.16 3.46 3.66

Lift capacity max lift height 80 cm from pivot pin Kg 870 970 1010 1080 1220 1520 1590 1680

Lift capacity 1,5 m lift height 80 cm from pivot pin Kg 1210 1370 1520 1670 1400 1560 1710 1890

Breakout force 80 cm from pivot pin Kg 1450 1600 1770 1960 1580 1660 1850 2080

Lift capacity max lift height at pivot pin Kg 1530 1700 1800 1890 1240 1410 1510 1600

Lift capacity 1,5 m lift height at pivot pin Kg 1840 2030 2220 2390 1500 1690 1870 2040

Breakout force from pivot pin Kg 2360 2510 2730 2940 1950 2100 2320 2520

Max tear-out force 1,5 m lift height 800 mm out from pivot pin 1930 1980 2460 2950 1560 1970 2440 2930

Rollback angle (degrees) Min 42 44 42 43 42 44 42 43

Dump angle (degrees) Min 50 50 49 46 50 50 49 46

Lifting time to max lift height at 60 l/min Sec 4.1 4.8 4.1 4.7 3.5 3.1 3.6 3.6

Parallel device

3rd service

Softdrive

Loader to subframe securing system

Loader weight Kg 310 335 360 390 360 390 420 445

Subframe type loader will mount to DM DM/US DM/US DM/US DM DM/US DM/US DM/US

Versa-X Series Loader SpecificationNON PARALLEL PARALLEL

Euro tool carrier and 3rd Service Euro tool carrier and 3rd Service

Ver

sa-X

Serie

s

No Yes

Yes Yes

No No

Deluxe Locking handle pin Deluxe Locking handle pin

B 3

X21 £2,550 X26 £3,350X31 £2,850 X36 £3,650X41 £3,350 X46 £4,150X51 £4,250 X56 £5,050

Some Versa-X features at a glance

Quicke Versa-XSeries The new Versa-X loader series

A Versatile Mid-Range Loader! Our new product program addressing the small to mid-size tractor range.8 loader models recommended for tractors from 40 to 110 hp

Loaders designed to fit on to the Delta subframe system and LCS hydraulic system ErgoDriveBest visibility in its class

Version with US bearing box available for used tractor market (not available on X21 and X26)

Non Parallel Parallel

Deluxe locking Excellent visibility Curved parallel rod Low cross-tubeGreat hitching visibilityProtected 3rd service

Standard EquipmentEuro Tool Carrier only

3rd service valve (if 3rd service is not required, deduct £250)

Deluxe Subframe LockingCable operated valve (ErgoDrive)

Subframe (Delta or US)When purchased as a package to mount to tractor

Euro Combi 8 + 5 tool carrier available - £200Alternative Skidsteer tool carrier available - Factory

B 4

Max system pressure: 250 bar

Max tank pressure: 20 bar

Pilot oil pressure: 23 bar

Max rec' flow, fixed pump: 120 L/min

Max rec' flow, variable pump: 150 L/min

Regulated flow to loader: Max 90 L/min

OC & LS £1,075 DM £1,595DMX £1,795

SHK £575HK (Deluxe) £1,275 S

SXEY £1,575E £1,875

Cable Controlled (ErgoDrive) Delta System

Hydraulic Data. Subframe TypesOpen Centre Hydraulic System Delta Subframe DM and DMX

Normally, manufacturers specified values are obtained at a hydraulic oil pressure of 185 bars

with a flow rate of 60 litres per minute.

Please note that on tractors with open centre hydraulic systems, 60 litres per minute is normally

quoted at rated engine RPM (i.e 2150 rpm).

A. 60mm Subframe saddle close to loader beam pivot point.B. 30 mm upright.C. 200 or 250 mm deep upright.BenefitsVertical point coupling.Larger dimensioned subframe.Maximum space for tractor servicing.

LCS Technical Data

Delta subframes have heavy duty dimensions, with many contact surfaces, all featuring precision machining. Details such as the 60mm wide saddle and the 40mm locking pin enable the loader to cope with difficult and heavy jobs for many years.

US SubframeVersa-X loaders are also available with US bearing boxes (except X21/X26) , so that they can mount to their respective US subframes.US loader width – 900mm

1. Previous model Quicke loader mounted to US subframes where the customer wants to update the loader but not the tractor.2. If a Delta subframe is not available for an older tractor model.

Hydraulic Kit Prices Subframe Codes and Prices

Note - When a US subframe is ordered with a loader and hydraulic set, the subframe cost is

£1595

Hose SetUS System

£1,795Electric Controlled

1040mm

"DM" Delta wide

"US" system

900mm

A

C

B

PT

LS

T

P

Serial

Load Sensing Open Centre

B 5

OCLS

Part No TJ107Price £120

MC4 replaces individual flat face couplers

LCS MultiCoupler MC4Single multicoupler for

LCS control valve. Mounts directly to control valve, incorporates electrical

connector

Part number5220530

Price £295

Hose Sets (If available for your tractor)

For the professional user

Hose Sets (If available for your tractor)

Price £1,275

Operates via the tractors own armrest joystick.

May require additional components from tractor

manufacturer.Consists of -

Diverter valve, hoses, switches, harness

Couplers

Price E £1,875

CANbus Electro-Hydraulic Valves

Monolever and Control Valve

Monolever c/w 3rd service and electric Softdrive switch

£1,075

Loader Control System

Do

you

need

a C

onve

rsio

n K

it fo

r you

r loa

der o

r tra

ctor

?

ErgoDrive LCS Kits

Price

Loader hoses connect via individual flat face couplers

Relay Kit

£1,575ElectroDrive Professional

EasyDrive LCS has similar functions as ErgoDrive plus Bucket Shake.

Kits include joystick mounting brackets.

EasyDrive

Price EY

You can adapt EasyDrive to operate a front linkage. Relay kit must be ordered with a Versa-X loader

Unique ergonomically designed electronic joystick,Ideal for tractors where

a cable operated joystick is not suitable.Thumb

controlled joystick.LCS EasyDrive

Electric Joystick and Control Valve

See Options and Conversion Kits page for other options

Price

Loader hoses connect via individual flat face couplers

£575

Standard kit connects to aux' valve including

mid-mount valves.May require additional

components from tractor manufacturer.

Relay Kit to operate higher current 3rd service diverter

valves in conjunction with LCS EasyDrive or ElectroDrive

LCS ElectroDrive Professional

As EasyDrive - but with additional Tortoise mode, Bucket shake, Visual AAC, On/Off 3rd service, Locked 3rd

service function, Continuous 3rd service function, Fast function, 3rd

service speed configuration, Programmable quick select button plus

more configuration settings...

Also required if operating additional diverter on 3 point

linkage

Valve type shown, may not be available for your tractor

Individual couplers are supplied standard with new loaders

B 6

Price £250 Price £200

1 2 3

Part No 5034021 Part No 5034071 Part No 5044970

Price £80 Price £225 Price £295

4 5

Part No 5034083 Part No 5034067Price £150 Price £195

Loader Options 3rd Service SoftDrive Manual Control

Standard fitmentMounts to left hand side of

loader bearing box. Manual shut off.

Retrospective fit

Deduct £250 if 3rd service is not required on loader

10550478

Interface Kit

This kit allows LCS Versa-X loaders to mount onto the

previous valve system using ½” quick release couplings.

This kit allows LCS version Versa-X loaders to mount onto the previous valve system fitted with Hydro

Quick/MultiDoc.

Allows LCS loader with Multicoupler and flat face

individual couplers to connect to an existing valve type.

Ideal when using one loader on two tractors - 1 x pre-LCS and

one x LCS. Kit. Kit 1 or 2 also requiredMale 7 pin - Female multi pin Male 7 pin - Female multi pin

½” Coupler Kit Hydro Quick Coupler KitVERSA-X LOADER onto pre-LCS HYDRAULICS (New loader to old valve)

10550480 Non-Parallel loader

5034241 Mounts to all loaders

Retrospective fit

Conversions and Additional Kits

Parallel Loader

See Other Options page for older loader options

Valve not inc'.

LCS ADDITIONAL KITSAdditional Accumulator Hose Interface KitFor EasyDrive and ElectroDrive

This kit allows LCS Quicke Dimension loaders to mount onto the Pre-LCS hose sets using the Multicoupler MC4

and individual flat face couplers.

This accumulator kit must be ordered for tractors that are fitted with a gear pump and the tractor auxiliary spools operate as a load sensing

system

Coloured loaders

Coloured Loader

Case redClaas greenDeutz greenFendt green

John Deere greenKubota orange

Landini blueMcCormick red

New Holland blueSame red £200

If the colour you requireis not listed, please check availability of your colour

choice with your Alo UK Area Manager.

B 7

Price £200 5201318 £400 5201251 £400

5221300-7 £0 830585 £400 830600 £400

Adapters and Tool Carrier OptionsQuicke No 5 (SMS) Adapter Alo No 3 Adapter

Skidsteer Tool Carrier

Alo No 3 Implements

Retrospective fit adapter

Quicke No 5 implementsWill fit from Euro

No 8 tool carrierto Quicke No 5 hooks.

Faucheuximplements


Will fit from Euro No 8 tool carrier to Faucheux

(McConnel)implement hooks.


Factory fitment only

Faucheux/McConnel Adapter

Will fit to Skidsteer implements only with Individual latch levers

Will fit from Euro No 8 tool carrier

to Alo No 3 implement hooks.

Mailleux/MX Implements


Will fit from Euro No 8 tool carrierto Mailleux/MX

implement hooks.

Mailleux/MX Adapter

Euro Combi 8 + 5 Tool Carrier

Will fit Euro No 8 andQuicke No 5 hooks.

Euro & Quicke No 5 implements

Factory fitment only

Skidsteer Hooks

10550180 £60Connects to implement hoses

Selecto Fix

mounts to tool carrier.Loader Part

Implement Part

5221553 £250 Perfect visibility for implement connection Simple implement connection

Check out our full range of implements later in this price list

Quicke Versa-XSeries

B 8

Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →

Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt

X 5,520 6,020 6,920 6,320 6,820 7,720 SX OC

X 6,920 7,720 SX OC

6,020 6,820 DM OC

12,4 x 24 5,520 DM OC LS

A, E 12,4 x 24 5,520 DM OC LS

A, E 380/70 R24 6,020 6,920 6,820 7,720 DM OC LS

A 12.4 x 24 5,520 6,020 6,320 6,820 DM OC

A 13.6 x 24 6,020 6,920 6,820 7,720 DM OC

A, N 9,5 x 24 5,220 6,020 DM OC

A 11.2 R24 5,220 5,520 6,020 6,320 DM OC

A 14,9 x 24 5,520 6,020 6,320 6,820 DM OC

J, P 280/85 R24 5,220 5,520 6,020 6,320 DM OC

M, P 14,9 x 24 5,520 6,020 6,320 6,820 DM OC

A, K 480/65 R24 5,520 6,020 6,320 6,820 DM LS

A, L 480/65 R24 5,520 6,020 6,320 6,820 DM LS EY

A 11,2 x 24 5,220 5,520 6,020 6,320 DM OC

A 13,6 x 24 5,520 6,020 6,320 6,820 DM OC

A 14,9 x 24 6,020 6,920 6,820 7,720 DM OC

A 320/70 R24 5220 5,520 6020 6320 DM OC

A 13,6 x 24 5,520 6,020 6,320 6,820 DM OC

A 540/65 R24 5,520 6,020 6,320 6,820 DM OCC, F

G, H, S 480/65 R28 6,020 6,920 6,820 7,720 DM HK OCF G, H, S 480/65 R28 6,020 6,920 6,820 7,720 DM HK OC

B, F 16,9 x 24 6,020 6,920 6,820 7,720 DM LSC, D F, G 480/65 R28 6,020 6,920 6,820 7,720 DM LS OC

A DMX subframe priced as DM G Deluxe Hose kit only with Multi Controller arm rest M State if front axle support is cast or welded.B Tractor must be equipped with power beyond plate H Tractor must be ordered with loader ready Multi Controller joystick N The subframe set is adapted for tractors with ROPS or Lochmann cab.C Additional kit 10377122 may be required for axle suspension J Subframe will fit with Folger front linkage P Serial Number of tractor requiredD Check type of front hitch mounted to tractor K ErgoDrive will not fit with mid-mount valve S CNH loader ready harness requiredE Check tractor hydraulic system - LS or OC L ErgoDrive not available X US and UM subframe - NOT DM Lock & GoF Will not fit tractors with wide weight carrier For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

Prices - £ Sterling

Sub

fram

e

Hyd

raul

ic

Opt

ion

Euro tool carrier, 3rd service

5120

844, 856XL CMFD

CS 78, 80, 86, 90, 94, and 85, 95, 100, 105 pro


ParallelNon-ParallelType

Case IH785, 885, 985, 795, 895, 995, 4220 - 4240

956, 1056 XL CMFD

CS 68, CS 75

MAXXUM 110, 120, 130 Multicontroller 4 cyl EP

MX 80c, MX 90c, MX 100c

MXU 100, MXU 110 + X Line

JX 55 - JX 70 and Tier 3

JX 75, JX 80, JX 85, JX 90 and Tier 3

JX 95 and Tier 3

JXC 1060 - JXC 1095, Quantum 65C, 78C, 85C, 95C

JXU 70 - JXU 115

CX 70 - CX 85

CX 95 - 105

Farmall 65A 75A

JXU 1070 - JXU 1100

MAXXUM 100, 110, 120, 130 Multicontroller, X Line 4 cyl

Farmall 85A, 95A, 105A, 115A

Farmall 55C, 65C, 75C

Farmall 85C, 95C 105c and 115C EP

Farmall 95U, 105U, 115U

Farmall 95U Pro, 105U Pro, 115U Pro

Farmall 55A

B 9



440/65 R28 5,520 6,020 6,320 6,820 SX LS OC

440/65 R28 5,520 6,020 6,320 6,820 SX LS OC

B 440/65 R28 6,020 6,920 6,820 7,720 DM LS OC

B, E 440/65 R28 6,020 6,920 6,820 7,720 DM LS OC

D, F 340/85 R24 6,020 6,920 6,820 7,720 DM OC HK

D 340/85 R24 6,020 6,920 6,820 7,720 DM OC HK

C 480/65 R28 7,120 7,920 DMX LS OC

H,J 480/65 R28 6,920 7,720 DM LS HK

D, L 360/70 R24 5,520 6,020 6,320 6,820 DM OC

D, L 420/85 R24 5,520 6,020 6,320 6,820 DM OC

D, F 340/85 R24 6,020 6,920 6,820 7,720 DM OC

A, D 440/65R28 6,020 6,920 6,820 DM OC

G 320/85 R20 5,220 5,520 6,020 6,320 DM OC

G, K 320/85 R20 5,220 5,520 6,020 6,320 DM OC

280/70 R18 5,220 5,520 6,020 6,320 DM OC

280/70 R20 5,220 5,520 6,020 6,320 DM OC

A Will fit with Lemoine front hitch. Will also fit w/o front hitch G X21/26 will not fit in combination with front hitch X US subframe - NOT DM Lock & GoB Subframe prepared with spacers for front hitch H Check if tractor is fitted with factory fitted siderails C Check if load sensing and or open centre J Deluxe hose set will not fit with hydraulically extendable trailer hitchD DMX subframe priced as DM K The hydraulic set will not fit tractors with electro hydraulic valve.E Check if tractor has Arion style hydraulic system L Loader X31/X36 will not fit tractors with front wheels larger then 420/70 R24.F Hose kit mounts to midmount valve and electric joystick. For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.


Parallel

Elios 210, 220, 230

Axos 310, 320, 330, 340

Arion 530, 540, 550 CIS/CEBIS Tier 4i

Type Non-Parallel

Ceres 75 - 95X (JD engine)

Ceres 75X, 85X 95X

Arion 410, 420, 430, 440, 450, 460 Tier 4

Elios 210, 220, 230 and 240 Tier4i

Atos 330, 340, 350

Atos 220, 230, 240

Hyd

raul

ic

Opt

ion


Sub

fram

e

Ares 546, 556, 566

Celtis 426, 436, 446, 456

Nectis 217, 227, 237, 257, 267, VL

Ares 547, 557, 567, 577

Arion 510, 520, 530, 540 CIS/CEBIS

Arion 410, 420, 430

Nectis 227, 247, 257, 267 F

ClaasEuro tool carrier, 3rd service

B 10


Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt

420/65 R24 6,020 6,820 DM OC

420/65 R24 6,020 6,820 DM OC

420/65 R24 6,020 6,820 DM LS HK

A, E 280/85 R20 5,220 6,020 DSX OC

A, M 11.2 R24 5,220 6,020 DSX OC

A 320/70 R20 5,220 6,020 DSX OC

E 320/70 R24 5,520 6,020 6,320 6,820 DM OC

A 420/65 R24 5,520 6,020 6,320 6,820 DM OC

320/85 R20 5,220 5,520 6,020 6,320 DM OC

B, D 320/85 R24 5,220 5,520 6,020 6,320 DM OC

13.6 x 24 6,020 6,920 6,820 7,720 DM OC

J 13.6 x 24 6,020 6,920 6,820 7,720 DM LS

F, M 6,020 6,920 6,820 7,720 DM LS OC

F, G, L 540/65 R34 6,920 7,720 DM LS OC

G 560/85 R28 6,020 6,920 6,820 7,720 DM LS

G, H 560/85 R28 6,020 6,920 6,820 7,720 DM LS

G 560/85 R28 6,020 6,920 6,820 7,720 DM LS

N 360/70 R20 5,220 5,520 6,020 6,320 DM LS

N 360/70 R20 5,220 5,520 6,020 6,320 DM LS

G 560/85 R28 5,520 6,020 6,320 6,820 DM LS

DM LS

A 4WD tractors only G Order accumulator kit 5034083 with EasyElectroDrive (£150) N Subframe not adapted for under slung (horizontal) exhaust pipe.B Front weight carrier must be removed in combination with X21 and X26 H Order Additional kit 5034301 for tractors with a front linkageC X21 and X26 will not fit in combination with front hitch J If Sauter front hitch fitted, contact SouterD Remove front weight carrier in combination with X21 and X26 L Special plug required if tractor has no front suspension (SDF - 04454514.4)E If tractor has Lochmann cab contact your area manager M Will fit with ROPS and Lochman cab.F Electric or Deluxe hose kit only on Profiline L/S verion For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

Agrolux 4.75 and 410

Agroplus 410, 420 and Ecoline

Agrotron 4.70, 4.80, 4.85, 4.90, 4.95

Agrotron 80, 85, 90, 100

Agrotron M410, M420

5090C, 5100C, 5110C

5090.4 D, 5090.4 D Ecoline and 5100.4 D

5100, 5110, 5120, 5130 Basic

5100, 5110, 5120, 5130 Profiline, TTV

5080D, 5090D D and Ecoline


Hyd

raul

ic

Opt

ion

Sub

fram

e


Type Non-Parallel Parallel

Agrotron K90, K100, K120 and K410, K420, K430


DeutzAgrofarm 85, 100

Agroplus 310, 315, 320 Ecoline

Agrolux 77, 87, 97

Agrolux 45, 55, 60, 65, 70, 310, 320

Agrofarm 420, 430 Profiline and TTV

Agrolux 57, 67

Agrofarm 410, 420, 430

Agroplus 75, 85, 95, 100

5090.4G, 5105.4G, 5115.4G

B 11



405/70 R20 5,520 6,020 6,320 6,820 DM LS

13.6 R24 6,020 6,920 6,820 7,720 DM OC

480/70 R28 6,020 6,920 6,820 7,720 DM OC

405/70 R20 6,020 6,920 6,820 7,720 DM LS

A 405/70 R20 5,220 5,520 6,020 6,320 DM LS HK

6,020 6,820 DM LS HK

5,520 6,020 6,320 6,820 DM LS HK

B 13.6 R24 6,020 6,920 6,820 7,720 DM OC HK

C,D 13.6 R24 6,020 6,920 6,820 7,720 DM OC HK

C,D 480/65 R24 6,020 6,920 6,320 6,820 7,720 DM OC HK

B, C, G 540/65 R24 6,020 6,920 6,820 7,720 DM OC HK

C,DE, F 480/65 R24 6,920 7,720 DM LS HK

D, E, F 540/65 R26 6,920 7,720 DM LS HK

A Order additional kit 10377143 for tractors with hyd' trailer brake G The Easy/ElectroDrive will not fit tractors without rear LS & P-connection.B 1000kg Counterweight must be used with X51/X56 loaderC Hose kit adapted to mount to Fendt mullti coupler.D Remove front hitch arms when using loaderE State if tractor is equipped with air tank (for hose kit)F Fendt CANbus harness required on tier 3 version tractors for 3rd/4th service. 0074.020.208.000 For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

Farmer 309, 310 LS/LSA

Farmer 311, 312

411, 412, 413, 414, 415 Vario

Fendt

409, 410, 411, 412

307C, 308C, 309C

310, 311, 312, 313 Vario SCR


Sub

fram

e

Hyd

raul

ic

Opt

ion


Non-Parallel Parallel

206S, 207S, 208P, 209P, 210P, 211P

Farmer 304, 305, 306, 307, 308 LS/LSA


309, 310, 311, 312, 313 Vario

Favorit 509, 510C

309, 310, 311, 312, 313 Vario SCR

Type

209P, 210P, 211P Vario

207, 208, 209, 210, 211Vario

B 12



X 11,2 x 24 5,520 6,320 S OC

X 5,520 6,320 SX OC

X 5,520 6,320 SX OC

X 11,2 x 25 5,520 6,320 SX OC

X 5,520 6,020 6,320 6,820 SX OC

X 12,4 x 24 5,520 6,320 SX OC

X 5,520 6,020 6,320 6,820 SX OC

X 13,6 x 24 5,520 6,020 6,320 6,820 SX OC

14,9 x 24 6,020 6,820 SX OC

14,9 x 24 6,920 7,720 SX OC

14,9 x 28 6,920 7,720 SX OC

X 5,520 6,320 S OC

X 5,520 6,320 SX OC

X 12,2 x 24 5,520 6,020 6,320 6,820 SX OC

X 5,520 6,020 6,320 6,820 SX OC

X 5,520 6,020 6,320 6,820 SX OC

X 13,6 x 28 6,020 6,920 6,820 7,720 SX OC

X 13,6 x 28 6,920 7,720 SX OC

X 6,920 7,720 SX OC

X US subframe - NOT DM Lock & Go

For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.


Euro tool carrier, 3rd serviceFiat & Ford



F 100, 110, 115, 120, 130 and 140

Hyd

raul

ic

Opt

ion

55-90, 60-90 and 65-90

60-66, 65-66, 70-66 and 80-66

100-90 and 110-90

90-90

70-90, 80-90 and 85-90

Ford

Fiat

Sub

fram

e

7810

4630, 4830, 5030

3430, 3930, 4130

4610 4wd

6810, 7610, 7710

5000, 6600, 5110, 5610, 6410, 6610 4wd

6410, 6610 4wd

6710, 7000, 7410, 7600

60-66, 60-76, 60-86, 70-66, 70-76, 72-86DT/LP/DTF, 80-66DTF, 80-76DTF, 82-86DT/LP/DTF

65-46, 65-56 and 70-56

65-88 and 65-93

65-94, 82-94 and 88-94

70-88, 72-93, 80-88 and 82-93

B 13



X 5,520 6,020 6,320 6,820 SX OC

X 6,920 7,720 SX OC

X 5,520 SX OC

5,720 6,220 6,520 7,020 DMX OC

C 320/70 R24 5,220 6,020 DM OC

C 320/70 R24 5,220 5,520 6,020 6,320 DM OC

B 440/65 R24 6,020 6,920 6,820 7,720 DM LS

A 320/85 R24 5,220 5,520 6,020 6,320 DM LS

5,520 6,320 DM LS

B 440/65 R24 6,020 6,920 6,820 7,720 DM LS

380/85 R24 5,520 6,020 6,320 DM LS

B 440/65 R24 6,020 6,920 6,820 7,720 DM LS

14,9 x 24 6,920 7,720 DM LS

14,9 x 24 6,920 7,720 DM LS

A, B 540/65 R24 6,920 7,720 DM LS HK

A, B, F 540/65 R24 6,920 7,720 DM LS HK

B, ED, F 16.9 R24 6,920 7,720 DM LS HK

G 480/65 R28 6,920 7,720 DM LS HK

G 6,920 7,720 DM LS

A Power beyond plate maybe required G State if tractor has original front hitchB Additional drawbar bracket kit 10386279 maybe required (extra cost) X US subframe - NOT DM Lock & GoC Will mount to 24/12 transmission.D Non Premium tractors must be equipped with power beyond plate (order John Deere plate AL171838) E If transfering hyd set from 6020 to 6030, an inline check valve is required + other adapters (extra cost)F ErgoDrive will not fit if tractor has a Command Armrest. Use ElectroDrive For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

6090RC, 6100RC, 6110RC

5620, 5720, 5820

5070M, 5080M, 5090M, 5100M

6300, 6310, 6400, 6410

6320, 6415, 6420,

6130, 6230, 6330, 6430

6090MC, 6100MC, 6110MC

John Deere2650, 2850

3350, 3650

5080R, 5090R, 5100R

5215, 5315

3200, 3210, 3300, 3310, 3400, 3410

5055E, 5065E, 5075E

5075M, 5085M, 5100M, 5115M (US built)


Sub

fram

e

Hyd

raul

ic

Opt

ion

Euro tool carrier, 3rd service Euro tool carrier, 3rd service


6120, 6215, 6220

Type

5080G, 5090G

6010, 6100, 6110, 6200, 6210,

5500 - 5510

5415, 5515

B 14



A 9.5 x 20 5220 6020 DM OC

A,B 12.4 x R24 5,020 5,820 DM HK

A,B 12.4 x R24 5,020 5,820 DM HK

A,B 12.4 x R24 5020 5,820 DM HK

A,B 12.4 x R24 5020 5,820 DM HK

A Designed to fit to tractors with factory fitted cabB Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only)


DK1002, DX100PC

KiotiDK55 and DK551C

DK751, DK801, DK901, DK902, DK904

DX7510, DX7510PC,

DX9010, DX9010PC


Sub

fram

e

Hyd

raul

ic

Opt

ion




B 15



360/70 R20 5,220 6,020 DM OC

B 12.4 X 24 5,520 6,320 DM OC

B 12.4 X 24 5,520 6,320 DM OC

C 320/85 R20 5,220 6,020 DM OC

C 320/85 R20 5,220 6,020 DM OC

C 440/65 R24 5,520 6,320 DM OC

C, D 12.4 X 24 5,520 6,320 DM OC

A 13.6 X 24 6,020 6,820 DM OC

13.6 X 24 5,520 6,820 DM OC

A 13.6 X 24 6,020 6,820 DM OC

A 13.6 X 24 6,920 7,720 DM OC

A 420/70 R24 6,920 7,720 DM OC

A 420/70 R24 6,920 7,720 DM OC

340/85 R24 6,020 6,820 DM OC

420/70 R24 6,920 7,720 DM OC

A Pressure reducing kit 10377217 may be requiredB Subframe available for 2wd tractorsC Subframe will not fit with underslung exhaust.D Hydraulic kit designed for tractors without trailer brake valve


ME 5700

M 5040, 6040, 7040


M 6060, M 7060

Kubota

M 8560, M 9960

ME 8200

ME 9000

M 8540, M 9540


Sub

fram

e

Hyd

raul

ic

Opt

ion


M 135GX

M 95S, M 105S

M 110GX

M 95S, M 105S

M 125X

M 128X

M 130X

M 108S

B 16



X 5,520 6,020 6,920 6,320 6,820 SX OC

X 6,020 6,920 6,820 7,720 SX OC

X 5,520 6,320 SX OC

X 5,520 6,320 SX OC

A 320/85 R20 5,220 5,520 6,020 DM OC

A 320/85 R20 5,220 5,520 6,020 DM OC

14.9 R24 6,220 7,120 7,020 7,920 DMX OC

B 5,220 6,020 DM OC

B 12.4 R24 5,520 6,020 6,320 6,820 DM OC

B 12.4 R24 5,520 6,020 6,320 6,820 DM OC

480/65 R24 6,220 7,120 7,020 7,920 DMX OC

300/70 R20 5,220 6,020 DM OC

C 300/70 R20 5,220 5,520 6,020 DM OC

300/70 R20 5,220 5,520 6,020 DM OC

5,720 6,220 7,120 6,520 7,020 7,920 DMX OC

6,220 7,120 7,020 7,920 DMX OC

D 9.5 x 20 5220 6020 DM OC

D, E 12.4 x R24 5,020 5,820 DM HK

405/70 R20 4720 5,020 5520 5,820 DM HK

D, E 340/85 R24 6,020 6,820 DM OC

5,520 6,020 6,320 6,820 DM OC

480/65 R24 6,020 6,920 6,820 7,720 DM OCA Will fit with or without front linkage X US subframe - NOT DM Lock & GoB DMX subframe priced as DMC Loader is offset to the rightD Designed to fit to tractors with factory fitted cabE Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only)


Type Non-Parallel

Powermondial 100

Technofarm 75, 85 Tier 2

Powerfarm 75, 85, 95, 105,

Technofarm 60, 70, 80

Powerfarm 60

1.55

Vision 80, 85

6-120C, 6-130C and 6-140C

Alpine 65, 75, 85 Std Tier 2

Vision 90, 100, 95, 105

4-90, 4-100, 4-105

1.70, 1.90

5-080H, 5-090 H, 5-100H, 5-110H

4-060, 4-070, 4-075 and 4-080


Hyd

raul

ic

Opt

ion

Globus 65, 75, 80

Blizzard 85, 95T

Mythos 90, 100, 105

Landini

Sub

fram

e

Ghibli 80, 90, 100

Euro tool carrier, 3rd serviceEuro tool carrier, 3rd service

Globus 55, 60, 70

Parallel

Alpine 70, 80, 85 Std GT Tier 3

Powerfarm 80, 90, 100, 110

Technofarm 80 Tier 3

B 17



X 5,520 6,020 6,320 SX OC

X 5,520 6,320 SX OC

X 6,920 7,720 SX OC

14.9 R24 5,720 6,220 6,520 7,020 DMX OC

14.9 R24 5,720 6,220 6,520 7,020 DMX OC

B 320/85 R20 5,220 5,520 6,020 6,320 DM OC

280/70 R20 5,220 6,020 DM OC

E 5,220 6,020 DM OC

E 12.4 R24 5,220 6,020 DM OC

F 320/70 R20 5,220 6,020 DM OC

420/70 R24 6,220 7,120 7,020 7,920 DMX OC

420/70 R24 6,220 7,120 7,020 7,920 DMX OC

B 480/65 R28 6,020 6,820 DM OC

11.2-R24 4,720 5,020 5,520 5,820 DM HK

A, C 14,9 x 28 6,220 7,120 7,020 7,920 DMX OC LS

A, C 14,9 x 28 6,220 7,120 7,020 7,920 DMX OC LS

5,720 6,220 6,520 7,020 DMX OC

5,720 6,220 7,120 6,520 7,020 7,920 DMX OC

6,220 7,120 7,020 7,920 DMX OC

D, J 5,720 6,220 7,120 6,520 7,020 7,920 DMX OC EY

D, J 6,220 7,120 7,020 7,920 DMX OC EY

D, J 6,220 7,120 7,020 7,920 DMX OC EY

540/65 R28 6,220 7,120 7,020 7,920 DMX OC

G, H, J, 14,9 x 28 6,220 7,120 7,020 7,920 DMX OC LS

H, J, K 14,9 x 28 7,120 7,920 DMX OC LSA Lift arms on front hitch must be removed when using loader G Lift arms on front hitch must be removed when using loaderB DMX subframe priced as DM H Check tractor hydraulic system - LS or OCC Check transmission type J Check transmission type - Dyna 6 trans'D Check cab - Essential, Efficient for hyd typeE Subframe will not fit with underslung exhaust X US subframe - NOT DM Lock & GoF Subframe adapted for tractors produced after 2008 (T35019) For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

5611, 5612 Efficient and Essential cab

3050, 3065, 6110 - 6140 Steepnose

4435, 4445, 4455

5608, 5609

5425, 5425, 5435 + Steepnose

5445, 5455, 5460 + Steepnose

5410

5440, 5450

3615 Utility, 3625, 3635, 3645 Utility/A-series

3630 A, 3640 A and 3650 A

3625, 3635, 3640, 3645, 3650, 3655 and 3660 F/S

5420, 5430

2430, 2435, 2440

410, 420, 430

6235, 6245, 6255, 6255, 6265 + Steepnose

6445, 6455 + Steepnose

4608, 4609, 4610

ParallelMassey Ferguson

4325, 4335, 4345, 4355, 4365

375, 390, 398

Type

4225, 4235, 4245, 4255

3070

6460, 6470 T2

5610

3080, 3085, 3090, 3115, 3120, 3125, 6150

3050, 3065, 6110 - 6140


Sub

fram

e

Hyd

raul

ic

Opt

ion

Euro tool carrier, 3rd serviceEuro tool carrier, 3rd service

Non-Parallel

B 18



12.4 R24 5,220 6,020 DM OC

D 12.4 R24 5,520 6,020 6,320 6,820 DM OC

D 5,520 6,020 6,320 6,820 DM OC

D, H 6,020 6,920 6,320 6,820 7,720 DM OC

D, H 6,020 6,920 6,320 6,820 7,720 DM OC

A, BC, E 6,020 6,920 6,820 7,720 DM LS

BC, E 14.9 R28 6,020 6,920 6,820 7,720 DM LS

380/70 R24 5,520 6,020 6,320 6,820 DM OC

405/70 R20 4720 5,020 5520 5,820 DM HK

340/85 R24 6,020 6,820 DM OC

340/85 R24 5,520 6,020 6,320 6,820 DM OC

480/65 R24 6,020 6,920 6,820 7,720 DM OC

J 9.5 x 20 5220 6020 DM OC

J, K 12.4 x R24 5,020 5,820 DM HK

D 380/70 R24 5,520 6,020 6,320 6,820 DM OC

D 380/70 R24 5,520 6,020 6,320 6,820 DM OC

J 480/65 R24 6,020 6,920 6,820 7,720 DM OC

A Check tractor spools - Case or Bosch E Check if tractor is Tier 3B Tractor must be equipped with power beyond plate F Check S/No of XTX 215C Will not fit tractors with wide weight carrier G Subframe will fit with front axle suspension (Tier 3 models).,D DMX subframe priced as DM H Counter weight must be used with X56J Designed to fit to tractors with factory fitted cabK Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only) For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

X6.420, X6.430


C-Max 60

X4-20, X4-30, X4-35, X4-40

X5.20, X5.30, X5.40 and X5.50

X10.55


X10.75, X10.95

T-Max 80, 90, 100,110, 115

X60.20, X60.30, X60.40, X60.50

X50.20, X50.30, X50.40. X50.50

X50.20M, X50.30M, X50.40M

McCormick

CX90, CX 100, CX110 T3

CX70, CX75, CX80, CX85

CX90, CX95, CX100, CX105

MC105, MC110 Tier 3

C-Max 75, 80, 85, 90, 95, 100, 105, 110

MC80, MC90, MC95, MC100, MC105

X4.20, X4.30, X4.40, X4.50, X4.60, X4.70

Sub

fram

e


Hyd

raul

ic

Opt

ion


Multicoupler MC4 £295

SoftDrive £200

Make life easier;add these options to your loader

Selecto Fix Implement Part £60

Selecto Fix Lower £250

Upgrade loader package to EasyDrive add £500

B 19



E 6,020 6,920 6,820 7,720 DM OC

A, G 11.2 x 24 5,220 5,520 6,020 6,320 DM OC

A 11.2 x 24 DM OC

A 540/65 x R24 5,520 6,020 6,320 6,820 DM OC

C 480/65 R28 6,020 6,920 6,820 7,720 DM LS OCD, M, J,

L 280/85 R24 5,220 5,520 6,020 6,320 DM OCD, J, K,

L 14,9 x 24 5,520 6,320 DM OC

A 480/65 R24 5,520 6,020 6,320 6,820 DM LS

480/65 R28 6,020 6,920 6,820 7,720 DM LS OC

A 11,2 x 24 5,220 5,520 6,020 6,320 DM OC

A, F 13,6 x 24 5,520 6,020 6,320 6,820 DM OC

A 14,9 x 24 6,020 6,920 6,820 7,720 DM OC

280/70 R16 5,220 6,020 DM OC

A 540/65 x R24 5,220 5,520 6,020 6,320 DM OC

A 540/65 x R24 6,020 6,920 6,820 7,720 DM OC

A 11.2 R24 5,220 5,520 6,020 6,320 DM OC

A 480/65 R24 5,520 6,020 6,320 6,820 DM OC

A 540/65 R24 5,520 6,020 6,320 6,820 DM OC

A 320/70 R24 5,220 6,020 DM OC

A 320/70 R24 5,220 5,520 6,020 DM OC

A, B, H 320/70 R24 5,220 5,520 6,020 DM OC

380/70R20 5,220 5,520 6,020 DS OC

420/70 R24 6,220 7,120 6,520 7,920 DMX LS

C 480/65 R28 6,020 6,920 6,820 7,720 DM LS OCA DMX subframe priced as DM G On F models, subframe will not fit with mudguardsB Will fit with Zuidberg front hitch on 85DA and 95DA H X21/X26 will not fit with front linkageC Additional kit 10377122 may be required for axle suspension (£56.00) J State if front axle support is cast or welded.D Subframe will fit with Folger front linkage K Subframe designed for tier 3 tractorsE Use 1000kg counterweight with X51/X56 L Serial Number of tractor requiredF Use 1000kg counterweight with X51/X56 For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

Type Non-Parallel Parallel Prices - £ Sterling

Sub

fram

e

Hyd

raul

ic

Opt

ion


5640, 6640, 6840, 7740

New Holland

TN 85A, 85DA, 95A and 95DA

TN 65F, 75F, 90F, TN 75FA, 85FA, 95FA

TL 70, TL 80, TL 90, TL 100 and TLA

TS 90, TS 100, TS 110

TS 100A, TS 110A

TD5.85, TD5.95, TD5.105, TD5.115 and Tier 4

T4020, T4030, T4040, T4050 Super steer

T4020, T4030, T4040, T4050 and F models

T5030, T5040, T5050, T5060, T5070

T6010, T6020 Plus/Delta, T6040 Elite

TD5.65, TD5.75

T5.95, T5.105, T5.115 and Electro Command

T4.75, T4.85, T4.95, T4.105, T4.115

T4.55, T4.65, T4.75

TD4020F, TD4030F, TD4040F

T6.120, T6.140, T6.150, T6.160

TD 55D, TD60D, TD65D, TD70D

TN 55D, 60DA, 65D, 70DA, 75D and 75DA

TD5040

TN 55, 60A, 65, 70A, 75 and 75A

TD 95D, TD5050

TD 75D, TD 80D, TD 85D, TD 90D

TD5010, TD5020, TD5030

B 20



5,220 5,520 6,020 6,320 DM OC

E, F 5,220 5,520 6,020 6,320 DM OC

G, J 5,220 5,520 6,020 6,320 DM OC

J 5,220 5,520 6,020 6,320 DM OC

420/85 R24 6,020 6,820 DM OC

380/85 R24 6,020 6,820 DM OC

B 380/85 R24 6,020 6,820 DM OC

420/70 R24 6,020 6,820 DM OC

560/85 R28 6,020 6,820 DM OC

D 6,020 6,920 6,820 7,720 DM LS OC

A, D 6,520 7,420 7,320 8,220 DM EY HK

420/85 R24 6,920 7,720 DM OC

420/85 R24 6,220 7,120 7,020 7,920 DMX OC

420/85 R24 6,220 7,020 DMX OC

420/85 R24 6,220 7,020 DMX OC

C, G 6,020 6,920 6,820 7,720 DM LS OC

C, G 6,020 6,920 6,820 7,720 DM LS OC

A ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verion G Order accumulator kit 5034083 with EasyElectroDrive (£150)B DMX subframe priced as DM H Order Additional kit 5034301 for tractors with a front linkageC Order accumulator kit 5034083 with EasyElectroDrive (extra cost) J Subframe not adapted for under slung (horizontal) exhaust pipe.D Special plug required if tractor has no front suspension (SDF - 04454514.4)E Front weight carrier must be removed in combination with X21 and X26F X21 and X26 will not fit in combination with front hitch For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

Explorer 90.4, 105.4, 115.4 Tier 4

Virtus J 90, 100, 110, 120

Explorer 3 90, 105

Iron 100, 110, 120, 125 (4 cyl) Continuo/Hiline


Euro tool carrier, 3rd serviceEuro tool carrier, 3rd service Hyd

raul

ic

Opt

ion

Sub

fram

e

Parallel

Dorado 90.4, 90.4 Classic and 100.4 T4i

Dorrado 80, 90 Classic T4i

Virtus 100, 110, 120, 130 Basic, Infinity

Same

Dorado 3 90, 100 and Classic

Dorado 3 60, 80 and Classic

Explorer 85, 95

Explorer 3 85, 100, 110

Iron 100, 110, 120, 125 (4 cyl)

Explorer 70 II, 75, 80 II, 90 II, 95 and Classic

Type Non-Parallel

Silver 3 100, 110

Silver 3 100, 110 Continuo

Silver 80, 85, 95, 110-4 cyl

Silver 100.4, 105

B 21



A, B 13.6-24-8PR 5,020 5,520 5,820 6,320 DM HK

A, B 13.6-24-8PR 5,020 5,520 5,820 6,320 DM HK

A Designed to fit to tractors with factory fitted cabB Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only)



Sub

fram

e

Hyd

raul

ic

Opt

ion


Parallel

T903

TYMType Non-Parallel

T1003

B 22



480/65 R24 6,020 6,820 DM OC

A, D 480/65 R28 6,220 7,120 7,020 7,920 DMX OC

A, C 480/65 R28 7,120 7,920 DMX OC

A, D 480/65 R28 6,220 7,120 7,020 7,920 DMX OC

A, C 480/65 R28 7,120 7,920 DMX OC

E 480/65 R24 6,020 6,820 DM OC

C, E 480/65 R24 6,020 6,820 DM OC

300/70R20 DM OC

C, E 480/65 R24 6,020 6,820 DM OC

F 16.9 x 28 6,920 7,720 DM OC HK

E 14.9 x 24 6,020 6,820 DM OC

B 16.9 x 28 6,920 7,720 DM LS

540/65 R28 6,020 6,820 DM OC

G 540/65 R28 6,920 7,720 DM LS

A Kit 10347271 required for old axle before S/N K36108 - Additional cost. G Hydraulic sets do NOT fit tractors with mid mounted tractor valve.B Subframe will fit with or w/o original front hitchC Subframe will fit with original Zuidberg front hitchD Subframe will fit all options except Zuidberg front hitchE DMX subframe priced as DMF Hose kits available for Advance models For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.

N 82, N 92

N 93, HiTech (H3), N 103 HiTech (H3/H5)

Type

N 91, N101, N111, N121 e and Advance

600 - 900

Valtra

6250, 6350, 6550, 6650, 6750, 6850

6250, 6350, 6550, 6650, 6750, 6850

A 72 - A 92

A 65 - A95

A 53, A 63, A73

N 104, 114e and 124 HiTech

6200, 6300, 6400

6200, 6300, 6400


Sub

fram

e

Euro tool carrier, 3rd service Hyd

raul

ic

Opt

ion



Contact Alo UK LtdContact Alo UK Ltd

A 83, A 93

N 122 Direct/Versu

B 23



X 5,520 6,020 6,320 SX OC

X 6,020 6,920 6,820 7,720 SX OC

X 5,520 6,320 SX OC

X 5,520 6,320 SX OC

X 5,520 6,320 SX OC

X 6,020 6,920 6,820 7,720 SX OC

11.2 - 24 5,220 6,020 DM OC

A, C, E 340/85 R24 5,220 5,520 6,020 6,320 DM OC

A, C 340/85 R24 5,220 5,520 6,020 6,320 DM OC

5,220 5,520 6,020 6,320 DM OC

A, E 340/85 R24 5,520 6,020 6,320 6,820 DM OC

A 340/85 R24 5,520 6,020 6,320 6,820 DM OC

A 340/85 R24 5,520 6,020 6,320 6,820 DM OC

G 340/85 R24 6,020 6,820 DM OC

A, B, D 380/85 R24 5,520 6,020 6,320 6,820 DM OC

A, B, D 380/85 R24 6,020 6,920 6,820 7,720 DM OC

A, BD, F 380/85 R24 6,920 6,820 7,720 DM OC

A, D 380/85 R24 5,520 6,020 6,320 6,820 DM OC

A, D 380/85 R24 6,020 6,920 6,820 7,720 DM OC

A, D 380/85 R24 5,520 6,020 6,320 6,820 DM OC

A, D 380/85 R24 6,920 6,820 7,720 DM OC

J 420/70R24 6,920 6,820 7,720 DM OC

A DMX subframe priced as DM E Check date tractor was manufacturedB Check if tractor has metal or plastic bonnet F 4 Cylinder onlyC NOT X21/X26 if fitted with front linkage G Adapted for tractors with 175L or 190L fuel tankD Subframe will not fit with front linkage J Subframe will not mount to tractors with side mounted drive shaft


Forterra HSX 100, 110, 120, 130 and 140

Proxima 70, 80, 90, 100


Sub

fram

e

Hyd

raul

ic

Opt

ion



ZetorEuro tool carrier, 3rd service

Type

Proxima 6441, 7441, 8441, 9441

Proxima 65, 75, 85, 95

Proxima Plus 85, 95, 105

4320, 4340, 5320, 5340, 6340, 7340

9145, 9245

7540, 8540, 9540

4341, 5341, 6341, 7341

6045, 6245, 7045, 7245, 7745

6011, 6211, 7011, 7211, 7711

Major 80

Proxima Plus 90, 100, 110

Proxima Power 85, 90, 95, 100, 105, 110, 115, 120

Forterra 8641, 9641

Forterra 120, 130, 140

Proxima Plus 8541, 9541, 10541

Forterra 10441, 11441

Forterra 12441

Forterra 115, 125

Forterra 95, 105

Forterra 100, 110

Check out our full range later in this price list

4 in 1 Multipurpose Flexigrip

H Series Bucket

Unigrip Flexibal

Remember to choose from ourrange of quality implements

Flexigrip

Silograb

BigBagLifter

C1

Model Lift Capacity 3000 4000 4500 5000 5200 6000 L LV H HT

SSkid Steer

X21 870 800 800 • ▲ •X31 970 800 800 • • ▲ •X41 1010 800 800 800

X51 1080 1000 800 800 800 • ▲X26 1220 1000 1000 ▲ • •X36 1520 1200 1200 ▲ ▲X46 1590 1200 1000 1000 • ▲ •X56 1680 1200 1200 1000 1000 ▲ •

▲ • Best Choice

COUNTERWEIGHT AND BUCKET RECOMMENDATION MATRIXCounterweight recommendation.Tractor weight to loader model. Which bucket should I choose?

TRACTOR WEIGHT (kg) BUCKET MODEL Counterweight ReguationsAreas of application

Light excavation and loading work

Loading of grain, wood chips and snow

Loading of lighter materials at high level

Heavy excavation and loading work

A counterweight increases tractor stability, traction and tractor braking force.Contract work in gravel/

sand, earth and stone

Grading work Regulation - EN 12525: No less than 20% of the gross tractor/loader

weight must apply to the rear axle, including the counterweight.

Professional snow clearance

A Good Choice

Work in gravel/sand, earth and stone

12

C 2

• Recommendation

Series MP

MPT4 in 1

Twin Fork Bale Spike Flexibal TopGrip Flexigrip

MODEL 135 160 180 210 200 220 185 210 160 140 130 160 160

X21 • • •X31 • • • • • • • • •X41 • • • • • • • • • • • • • •X51 • • • • • • • • • • • • • •X26 • • • •X36 • • • • • • • • • •X46 • • • • • • • • • • • • • • •X56 • • • • • • • • • • • • • •

• Recommendation

Stone Fork

MODEL 1000 1600 150 130 150 170 130 150 190 130 150 190 125 150 800 1000

X21 • • • •X31 • • • • • • • • • • •X41 • • • • • • • • • • • • • • • •X51 • • • • • • • • • • • • • • • •X26 • • • •X36 • • • • • • • • • • •X46 • • • • • • • • • • • • • • • •X56 • • • • • • • • • • • • • • • •

IMPLEMENT - LOADER RECOMMENDATIONS

BUCKETS BALE HANDLING

IMPLEMENT - LOADER RECOMMENDATIONS.

Unigrip

FORKS AND GRABS

Silograb Multibenne Silocut SG CounterWeight

IMPLEMENT - LOADER RECOMMENDATIONS.

Series H & HT

Series LV

Series S

Skid Steer only

Pallet Forks Manure Forks

Contact Alo UK for implement recommendation for loader C 3

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price1.35m 0.54 m³ Euro 11251018Q 1.35m 0.54 m³ Euro 11251108Q 1.85m 0.72 m³ Euro 11251068Q

53" 18 cu.ft SMS 11251015Q 53" 18 cu.ft SMS 11251105Q 72" 25 cu.ft SMS 11251065Q

1.60m 0.65 m³ Euro 11251028Q 1.60m 0.65 m³ Euro 11251118Q 2.10m 0.82 m³ Euro 11251078Q

Type 3 11251023Q 63" 23 cu.ft SMS 11251115Q 83" 29 cu.ft SMS 11251075Q

SMS 11251025Q 1.85m 0.72 m³ Euro 11251128Q 2.40m 0.95 m³ Euro 11251088Q

1.85m 0.72 m³ Euro 11251038Q 72" 25 cu.ft SMS 11251125Q 94" 34 cu.ft SMS 11251085Q

Type 3 11251033Q 2.10m 0.82 m³ Euro 11251138Q 2.60m 1.03 m³ Euro 11251098Q

SMS 11251035Q 83" 29 cu.ft SMS 11251135Q 102" 37 cu.ft SMS 11251095Q

2.10m 0.82 m³ Euro 11251048Q

Type 3 11251043Q

SMS 11251045Q

2.40m 0.95 m³ Euro 11251058Q94" 33 cu.ft SMS 11251055Q

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price2.00m 1.16 m³ Euro 11251148Q 2.10m 1.50 m³ Euro 11251808Q

79" 41 cu.ft SMS 11251145Q 83" 43 cu.ft SMS 11251805Q

2.20m 1.28 m³ Euro 11251158Q 2.40m 1.70 m³ Euro 11251818Q87" 45 cu.ft SMS 11251155Q 94" 60 cu.ft SMS 11251815Q

2.40m 1.70 m³ Euro 11251168Q 2.60m 1.85 m³ Euro 11251828Q94" 60 cu.ft SMS 11251165Q 102" 65 cu.ft SMS 11251825Q

2.60m 1.85 m³ Euro 11251178Q102" 65 cu.ft SMS 11251175Q

240HDV 1,435

240HV 1,335 260HDV 1,735

240H 905 HIGH VOLUME

260HV 1,435

220HV 1,035

HIGH VOLUME HEAVY DUTYSe

ries

HV

Serie

s H

DV

200HV 835 210HDV 1,135

210H 80583" 29 cu.ft Remember to quote a Counter Weight

240HD 1,385

185H 70572" 25 cu.ft 210HT 985 260HD 1,585

160H 655 160HT 785 210HD 1,08563" 23 cu.ft

185HT 885

135H 605 135HT 725 185HD 985

BUCKETSGENERAL PURPOSE GENERAL PURPOSE WITH TEETH HEAVY DUTY

Serie

s H

Serie

s H

T

Serie

s H

D


Mouth Mouth

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price1.65m 1.65m Euro 11253138Q

65" 65" SMS 11253138Q

1.90m 1.90m Euro 11253148Q75" 75" SMS 11253145Q

2.15m 2.15m 85" 85"

Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No PriceEuro 11252658Q 2,045

Without 11252650Q 1,945Euro 11252668Q 2,245 Part No Price

Without 11252660Q 2,145Euro 11252678Q 2,445 Model Width Capacity Hook Part No Price

Without 11252670Q 2,345Euro 11252688Q 2,645

Without 11252680Q 2,545

965

230 2.30m 91"

1.41 m³200XH 2.00m 79"

1.60 m³

60000540 1,500

Eur

o

11251528Q220 2.20m 87"

3754th service kitBucket mounted

60000485 100

Plastic Cutting Edge kit

Steel Bolt-On Cutting Edge kit

Description

FRONT TIPPING

XH S

erie

s Rubber dampeners used to reduce noise

during operation

Will require 3rd and 4th service fuctions.

price includes hoses

Hoses included with hydraulic implements are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost

240XH 2.40m 94"

2.00 m³

260XH 2.60m 102"

2.20 m³

Also available with Trima hooks at Euro prices.0.83 m³ 11251738Q 1,155

0.65 m³

240 2.40m 94"

Special bucket mounted 4th service valve to activate flap 60003452

220XH 2.20m 87"

1.80 m³

SPECIALIST BUCKET

SPECIAL CLEARING BUCKET

Gra

ding

2.00m 79"

0.93 m³ 615

200PC 0.78 m³ 785

The Precision Bucket is different from other buckets by being narrower in the front. The high volume of the bucket and long base give better loads when travelling between sites, reducing load trips. Material can also be placed with greater accuracy with increased visibility to the cutting edge.PS Maximise bucket filling.PC Where loose material is used.

Euro 11252848Q 3,400

3,420

3,120

210MPT 0.66 m³

185MP 0.56 m³ 3,020 185MPT 0.56 m³

SPECIAL BUCKETSMULTI PURPOSE MULTI PURPOSE WITH TEETH SPECIALIST BUCKET

4 in

1

4 in

1

967m

m

967m

m

Prec

isio

n

Conical (PC) Straight (PS)

200PS

Also available for skidsteer. See skidsteer implements page

Order Selecto Fix for simple hose connection

11252448QEuro

11252168QEuro

11252158QEuro

11252148QEuro

11252468QEuro

11252458QEuro


2,820160MP 0.48 m³ 2,720 160MPT 0.48 m³

210MP 0.66 m³ 3,320

Contact Alo UK for implement recommendation for loader. C 5

Mouth Mouth Mouth

Euro hooks welded

Model Width Capacity Tines Hook Part No Price Model Width Capacity Part No Price Model Width Capacity Tines Hook Part No Price1.85m 11254081Q 1.85m

72" 11254089Q 72"

2.10m 72" 11254091Q 2.10m83" 11254094Q 83"

2.40m 11254095Q 2.40m94" 83" 11254096Q 94"

2.60m 11254103Q 2.60m102" 11254104Q 102"

94" 11254105Q

11254120Q

Hook Part No Price 11254114Q102" 11254118Q

Mouth

Part No Price60002029 150

Part No Price

Model Width Capacity Tines Hook Part No Price1.30m 0.69 m³

51" 24 cu.ft

1.50m 0.79 m³59" 27 cu.ft

1.70m 0.90 m³67" 32 cu.ft

1.90m 1.01 m³Model Width Colour Part No Price 75" 35 cu.ft

185BOH 1.85m 11254153Q 175 2.10m 1.11 m³210BOH 2.10m 11254154Q 200 83" 39 cu.ft

240BOH 2.40m 11254155Q 225 2.30m 1.22 m³260BOH 2.60m 11254156Q 250 91" 43 cu.ft

BUCKET GRABSHEAVY DUTY BUCKET GRAB

Pow

ergr

abB

OH

1500

mm

Bolt

On

Hoo

kR

ail T

ype

CNH LM

Bobcat FDI

Claas Scorpion

JCB Qfit

Manitou MTL

Merlo ZM2

Matbro (Pin and Cone)

Volvo

Hauer

SkidSteer

Schäffer

SMS

Hook Type

Powergrab BOH c/w hooks

1500

mm

Price includes loader fittings and hoses

185BOH

275

260BOH 1.40 m³ 9 3,400

MULTIPURPOSE GRAB

Mul

tiben

ne

1248

mm

185 SE* 1.01 m³ 6

Eur

o

11250728Q 2,700

* Powergrab 185SE up to Q56 loader only

KramerWeidemann

11254111Q

11254112Q 225

11254123Q

Side plate extension set Multipurpose grab

11260872 150price includes hoses

Weidemann

HEAVY DUTY BUCKET GRAB

Pow

ergr

ab SE

Price includes loader fittings and hoses

210BOH 1.15 m³ 7

240BOH 1.30 m³ 8

210 SE 1.15 m³ 7 11250738Q 2,90011254100Q

11254080Q

Hook

HEAVY DUTY BUCKET GRAB

Pow

ergr

abB

OH

1.01 m³

Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost

Hook Types for Powergrab BOH (only)

260 SE 1.40 m³ 9 11250758Q 3,400

240 SE 1.30 m³ 8 11250748Q 3,250

11254110Q

11254102QRai

l Typ

eW

ithou

t hoo

ks2,700

2,900

3,250

1.01 m³ 6Kramer

Weidemann

KramerWeidemann

10 11250848Q 2,075

210 11 11250858Q 2,275

8 11250828Q 1,675

170 9 11250838Q 1,875

7

1500

mm

Kramer

12 11250868Q 2,475

Eur

o

11250818Q 1,475

150

N.B. For high flow/pressure Telehandler, We recommend a pressure relief valve.

Type

BOLT ON CUTTING EDGE option

The NEW Powergrab BOH Adapted to mount to material handlers to suit Bolt On Hooks (BOH). Prepared for a Bolt on Cutting Edge (BCE).Pressure relief valve may be required.

3 section cutting edgeY

ello

w

Och

ra

3,650

3,500

3,150

2,950

1.40 m³

1.30 m³

1.15 m³

190

11254099Q 195

11254113Q 250

11254147Q 295

11254366Q 305

230

11254367Q 290

130

250

11254125Q 290

Pressure Relief Valve for PG BOH

11254368Q 255

11254124Q 250

11254122Q 275

Pow

ergr

abB

OH

Euro

Euro

Euro

Euro

2.10m

2.60m

2.40m

1.85m

260BOH

240BOH

210BOH

185BOH


Mouth Mouth

Model Width Hook Part No Price Model Width Capacity Tines Hook Part No Price Model Width Capacity Tines Hook Part No PriceEuro 11251838Q Euro 11250888Q Euro 11254226Q 2,595

Type 3 11251833Q Type 3 11250883Q SMS 11254226Q 2,59551" SMS 11251835Q 51" SMS 11250885Q w/o 11254227Q 2,495

Euro 11251848Q Euro 11250898Q Euro 11254229Q 2,995Type 3 11251843Q Type 3 11250893Q SMS 11254230Q 2,996

59" SMS 11251845Q 59" SMS 11250895Q w/o 11254228Q 2,8951.70m Euro 11251858Q 1.70m Euro 11250908Q Euro 11254232Q 3,395

67" SMS 11251855Q 67" SMS 11250905Q SMS 11254233Q 3,3961.90m Euro 11251868Q 1.90m Euro 11250918Q w/o 11254231Q 3,295

75" SMS 11251865Q 75" SMS 11250915Q 2.00m2.30m Euro 11251878Q 2.10m 78"

91" SMS 11251875Q 83" 2.25m2.30m 88"

91"

2.50m98" Part No Price

60002029 150

Model Width Tines Length Hook Part No Price

1.10 m³1.75m68"175 SG

770m

m

3,600

260 2.60m

102"

5 grab27cm

11250535 3,700

240T 5 grab8 lower

11250538 3,900

ROUND BALE - BRASH

Without teeth With teethc/w Hoses. Order with FOC protective backscreen.

210 2.10m

83"

4 grab24cm

Eur

o

11250533 3,200

210T 4 grab6 lower

11250536 3,400

240 2.40m

94"

4 grab24cm

11250534 3,400

240T 4 grab7 lower

11250537


1.25 m³ 16

225 SG 1.40 m³

200 SG 3,99511254234Qw/o

Max

i G

rapp

leFORKS AND GRABS

2nd year warranty does not include any wearing parts.2,575

SHEAR GRAB

11 11250928Q 2,375230 12 tines 1,035

Eur

o

250 1.33 m³

210

Remember to quote a Counter Weight

230 1.22 m³ 12 11250938Q

13 11250948Q 2,775

Max hyd pressure2 cylinders - 210 bar3 cylinders - 250 bar

18

Silocut SGII

Order pressure reduction valve if pressure exceeds above

NEW Silocut SGIIWelded sleeves for the tinesConus 3 outer tinesDacromet® corrosion protection on Bolt-on knifesNew 80mm x 80mm Backframe hook interface to accept various bolt-on hook40mm cylinder pins Improved greasing points for the main pivot pinsMore efficient cutting with the side tines closer to the side knifeStong corner braces to protect knives.

Pressure Relief ValveN.B. For high flow/pressure Telehandler, We recommend a pressure relief valve.

9 tines 805 170 0.90 m³ 9 1,975

190 10 tines 905 190 1.01 m³ 10 2,175

MANURE FORK SILAGE GRAB

150 1.50m8 tines 725 150 1.50m

0.69 m³ 7 1,575

0.79 m³

1.11 m³

170

8 1,775

Man

ure

Fork

s

Silo

grab

1172

mm

130 1.30m7 tines 655 130 1.30m

price includes hoses

Tines

Silo

cut S

GII

11254237Q 4,395

Euro version includes hoses (also available with Trima hooks)

100.80 m³125 SG

120.95 m³150 SG 1.50m59"

1.25m47"

14


Roller

89mm

129mmTines Roller Bale Size Price Model Price Model Hook Price

2

Fixing PriceClamp 150

Part No Price

Tines Hook Price Model Hook Price Model Pricewithout 335

5, MX


200 60 - 200cm max

11250390without hooks and hoses 1,980

Euro, No 3, No 5 or MX hooks/hoses (state hook type) 2,130

1 x long2 x short 115cm

11254072Q

435

11253350Q without

TG540mm

to 1030mm closed 11253358Q

1,225

1,37511254072Q + hooks

11254051QEuro

Width Part No Width Part No and Spec

Euro

120 - 160cm max

without 11250780Q

200 150 - 200cmmax

11250400Qwithout hooks and hoses 1,925

For alternative hook types see back of price list

11260637

Dimensions Part No

Qua

drog

rip

SQUARE BALE

1,125

Optional pressure relief valve 60010270 for telehandler maybe required

120Euro version with welded hooks, Type 3 with bolt on hooks

Sing

le S

pike

M

KII

Euro version with welded hooks

Backstop

16060010270


ROUND BALE ROUND AND SQUARE BALE

Topg

ripPressure Relief Valve

For Flexibal, Flexigrip and Unigrip

Part No 1,275


Euro, No 3, No 5 or MX hooks/hoses (state hook type)

Now with 2 x anti-rotation tines

N.B. For high flow/pressure Telehandler, we recommend a pressure relief valve. Reduces to 180bar

BALE HANDLINGROUND BALE

Flex

ibal

with

inte

gral

tine

s

Flex

igrip

for v

ertic

al s

tack

ing

Uni

igrip

Euro price includes hooks and hoses

Part No and Spec Bale Size Part No and Spec Bale Size Part No

160 120 - 160cmmax


130 90 - 130cm max

1,025


without 11250770Q

Euro, No 3, No 5 or MX hooks/hoses (state hook type) 1,375 1,175


Euro, No 3, No 5 or MX hooks/hoses (state hook type)

184cmmax

Ø89mm

2 Ø129mm

180cmmax






Part No Price

Model Width Hook Part No Price Hook Part No Price140(82) 11251577 445140(125) 11251578 495

Part No Price Part No Price

Part No Price

Model Tines Hook Part No PriceEuro 11251368

Type 3 11251363SMS 11251365Euro 11251378

Type 3 11251373SMS 11251375

Part No Price

Part No Price11260349 9511260348 95


WidthOpen 1280mm Closed 350mm

(Outside to outside of tines)11252050Q 895

Does not include backframe or tines

Extension frame

Hinged Square Bale Fork Options

Designed to ease manoeuvering and spreading of the pallet fork tines without

leaving the tractor.Ideal to clamp plallets/crate when loading or

stacking

DescriptionBig Bag Lifter adapter

5 1,095

140 140cm 2 775

190 190cm

11252335QSMS


2500kg 1,015Includes 2 x hydraulic cylinders

price includes hooks

Width

SQUARE BALE FORKS, PALLET FORKSPALLET FORK (ISO)

Hinged safety frame

Fixed frame

Pallet Fork Accessories (ISO type)

price includes welded hooks

Tine Length

11252211Q 795

Description

Euro

SQUARE BALE

95

Hin

ged

Squa

re

Bal

e Fo

rk

Type 3 11252333Q

11252338QEuro

11252348QEuro

11252345Q

SQUARE BALE

Big Bale Fork Options

Bale Spike AdapterISO type frame

Info

Pallet Fork Accessories (ISO type)

1 short1 Long

295

Requires 3rd service

Pallet Fork Accessories

Tines1 short1 Long

Bale Spike AdapterOld Alo type frame

Will not mount to ISO type backframe

295

925

Will not mount to old Alo type backframe

Big

Bal

e Fo

rk

2 x 125cm2 x 82cm

140cm

PALL

ET F

OR

K

LOA

DER

S

Tines LengthModel

11215030


Log Grab AttachentISO type frame


11251754QExtension frame 11215019

Tines

Pallet Fork Hydraulic Spreader Kit

1000kg version - Small loaders only i.e. small Versa-X, Q21/26

970mm

1220mm

1000kg 970mm

1600kg

825

975

1220mm

Euro 11252308Q

11252303QType 3

SMS 11252305Q

11252328Q

11252323Q

11252325QSMS

Type 3

Euro

MX 11252732Q

SMS

MX 11252712Q

MX 11252722Q

MX 11252732Q


Model Height Capacity Hook Part No Price Model Height Capacity Part No Price Model Height Capacity Part No Price11254361Q 425 11254363Q 825 11254364Q 1,02511254541Q 11254623Q 11254632Q 1,32511254542Q 11254624Q 11254633Q 1,30511254543Q 11254625Q 1,125 11254634Q 1,29011254641Q 11254627Q 1,105 11254635Q 1,25511254544Q 725 11254628Q 1,090 11254636Q 1,30011254547Q 690 11254629Q 1,055 11254637Q 1,27511254548Q 655 11254630Q 1,10011254549Q 700 11254631Q 1,07511254550Q 675

Model Hook Price

Model H/D/W Hook Part No Price Model Width Hook Part No Price

Part No Price

Hook PriceEuroSMS

10377123

Description1200mm Long hoses - kit for Implements to fit directly onto 3rd service valveConversion for older loader To fit hosesbetween 3rd service and tool carrier Q700/900

Big Bag Lifter. Dual & Triple models, capable of lifting two or three bags at once have the extra capacity of 1500kgs (each hook), along with the ability of extending the arm for higher bags to 51cm in 17mm increments

Dual1500

Loaders

Dual1500

Handlers

975

455

FERTILISER BAG LIFTER

BM large

Hook HookW/O

Claas Scorpion BM large

Lifti

ng A

rm

Merlo

OTHER IMPLEMENTSFERTILISER BAG LIFTER

THREE-POINT LINKAGE

SPECIAL FORK

Rear shown

Ideal for stones and cut logs

1,065

1,265Euro

11251548Q

200 2.00m 18 tines

Remember to quote a Counter Weight

147cm 1000kg

575

Single1000

Loaders

Tines

Blade Length

REAR COUNTERWEIGHT

Cou

nter

wei

ght


Single1000

Handlers

HD 170cm Euro

Capacity

Part No

11209793 895

Thre

e-po

int

linka

ge h

itch

H 725 D 780W 810

Small up to 800kg

H 725 D 1030W 810

Large 1000 - 1500kg

11251676 495

55511251661

Lower rear links

Ston

e Fo

rk

Capacities - from 800kg upto a maximum of 1500kg.

Counterweights must be filled by the end user. Model "Large" filled with concrete to position 1 = 1000kg.

Combination of steel and concrete for a weight up to 1500kg

11251435

11251438

Part No

Hose Kit Options

50

130

1214901Attaches to 3 point hitch and Euro

implements attach via pin securing.Ideal for rear and front hitch.

Silo

split

HD

Order counterweight for tractor/loader combinations as per regulation EN12525

Heavy Duty (c/w safety guard)

11251558Q

150 1.50m 15 tines

Lifti

ng A

rm

Lifti

ng A

rm

Matbro Merlo

Manitou JCB Qfit BM large

MXType 3SMSEuroW/O

ROUND BALE

FERTILISER BAG LIFTER

Manitou Merlo

Matbro

Heightadjustable

Heightadjustable

Manitou JCB Qfit

2 x 1500kg

151cmto

204cm

3 x 1500kg

151cmto

204cm

Triple1500

Handlers

Matbro

Claas Scorpion JCB Qfit

SMSEuroW/O


Model Width Capacity Hook Part No Price Model Width Tines Hook Part No Price Model Hook Part No Price1.85m 0.60 m³

73" 18 cu.ft

2.10m 0.68 m³83" 24 cu.ft

Part No Price

Mouth

Model Width Capacity Hook Part No Price1.65m Tines Hook Part No Price

65"

1.90m 75"

2.15m 85"

1.65m 65"

1.90m 75" Part No Price

2.15m 85"

SKIDSTEER IMPLEMENTS

MULTI PURPOSE (Skidsteer)

185SSkid Steer

11251721Q 710

0.66 m³

Sing

le S

pike

M

KII

Fixed frame

GENERAL PURPOSE (Skidsteer)Se

ries

S

185MP 3,020

210MP 3,320

160MP 2,720

For skidsteer connection only.Special order!

2500kg 1150

PALL

ET F

OR

K

WA

LK-T

HR

U.

950

850

1220mm4 in

1

967m

m

0.48 m³

0.48 m³

210S 11251821Q 815

1100

0.56 m³

1000

0.56 m³

210MPT 3,420

185MPT 3,120

160MPT 2,820

Walk-Thru Pallet Fork.The pallet fork frame is specifically designed to suit Skid Steer machines with a forward entry cab so that you can easily and safely enter the cab over the pallet via a sturdy step. In-between the fork frame supports is a walk way (Walk-Thru)

Width

11252461QSkid

11252451QSkid

11252441QSkid

0.66 m³

Skid

11252151QSkid

11252141QSkid

11252161Q

1060mm

Fixed frame pallet forks for SkidSteer with walk through step

PALLET FORK (Skidsteer)

Ski

d

11253974Q

11253978Q

11253980Q

11253988Q

11253990Q

11253994Q

1050

800kg

1500kg

Tines Length

140(125) 2 x 125cm

11251720Q 495

SQUARE BALE (Skidsteer)

Big

Bal

e Fo

rk

140cm Skid

60001611

Price

Left

140

Skidsteer Weld On HooksSkidsteer weld on

Sold as a pair

60001610Right

Big Bale Fork OptionsDescription

Extension frame 11215019 95

2000kg

1060mm

1220mm

1060mm

1220mmROUND BALE (Skidsteer)

4351 x long2 x short

11254051QSkid115cm

Now with 2 x anti-rotation tines

C 11

Price 100 Price 100 Price 100

Price 100 Price 100 Price 100

Price £95 Price £95 Price £75See Other Options page for older loader options

11220063 11209710 11209711

Euro Weld on Ear Euro Weld on Ear Trima Weld On Ear Weld on Ears

Weld on extension ears extend the eye of Euro and Trima hooks to increase crowd

back angle.Affects older implements with flat upright

back.

830513 11251690 11261363

11209714 11209717 11209718

MX Bolt On Hook Alo No 3 Bolt On Hook Trima No 5 SMS Bolt On Hook

65

SMS

65

Euro Standard Bolt On Hook Euro Extended Eye Euro Extended Hook and Eye

10830440

Euro

65

Type 3

830567 830105

L/H & R/H hooks

L/H & R/H hooks

Tack welded together

WELD ON HOOKS, BOLT ON HOOKS, WELD ON HOOK EARS and DIMENSIONSEuro Weld On Hooks Alo No 3 Weld On Hooks Trima No 5 Weld On Hooks HOOK TYPES and DIMENSIONS

856

420

Alo (Type 3)

690

500

Trima (No 5/SMS)

1080

79

530

Euro (No 8)

C 12

Model Type Box Size Part No Price Model Type Box Size Part No Price Model Type Box Size Part No PriceHook 40 & 80 60003104 Hook 40 & 80 60003283 Hook 40 & 80 60003107

40 x 80 60004375 40 x 80 60004375 40 x 80 6000437580 x 80 60004374 80 x 80 60004374 80 x 80 60004374

Model Type Box Size Part No Price Model Type Box Size Part No PriceHook 40 & 80 60003106 Hook 40 & 80 60003105

Model Type Price40 x 80 60004375 40 x 80 6000437580 x 80 60004374 80 x 80 60004374

HEAVY BOLT ON HOOKSJCB Q-fit Kramer/Claas Scorpion Pin and Cone

Then choose 250Then choosePin and Cone U Bolt

Merlo Manitou Volvo BM

U Bolt U Bolt265Q-fit Then choose 280Kramer

If the hook type you require is not shown above, please call your area manager of the Alo UK sales office.

Will mount to 40mm x 80mm box section frames only

Part Number

U Bolt U Bolt Volvo BM Bolt on 11209713 300275Then choose 230Then chooseMerlo Manitou

C 12

Weights of materials KG/m³ % Fill Weights of materials KG/m³ % Fill `

Aggregate (brick) 1820 100 Flour 440 85 1 cubic cm = 0.06102 cubic inches 1 cu cm = 0.06102 cu inAshes 600 85 Glass 2,600 85 1 cubic metre = 35.31467 cubic feet 1 cu m = 35.31467 cu ftAsphalt 1,600 100 Granite chippings 2,655 85 1 cubic metre = 1.31 cubic yards 1 cu m = 1.30795 cu ydBarley 609 85 Gravel (dry) 1,700 85Beet pulp (nuts) 600 85 Lime (quick loose) 850 100 1 cubic inch = 16.38706 cm 1 cu in = 16.38706 cm³Beet pulp (pressed) 900 110 Limestone (crushed) 1,526 100 1 cubic foot = 0.02832 m³ 1 cu ft = 0.02832 m³Bewers grains 1,110 85 Manure (farmyard) 900 85 1 cubic foot = 28316.846 cm³ 1 cu ft = 28316.846 cm³Brick aggregate 1,830 100 Mortar 1,600 100 1 cubic yard = 0.76455 m³ 1 cu yd = 0.76455 m³Bricks (common) 2,450 per 1,000 x Oats 410 85Brick (facing) 2,700 per 1,000 x Peat (dry) 400 100Cement (natural) 895 100 Potatoes 690 85Cement (portland) 1,440 100 Rubble 1,025 100 1 sq. cm = 0.15500 sq. inches 1 sq. cm = 0.15500 sq. inChalk 2,200 100 Refuse (dry) 398 100 1 sq. metre = 10.763 91sq. feet 1 sq. m = 10.763 91 sq. ftClay (fire) 2,080 100 Sand (dry) 1,550 100 1 sq. metre = 1.195 99 sq. yards 1 sq. m = 1.195 99 sq. ydClay (wet) 1,880 100 Sand (wet) 1,900 110 1 hectare = 2.47105 acres 1 ha = 2.47105 acresCoal (anthrace) 896 100 Sawdust 250 110 1 hectare = 0.00386 sq. miles 1 ha = 0.00386 sq. miCoal (bituminous) 1,261 100 Silage (ensiled) 730 110Coal (canneI) 1,261 100 Silage (green) 340 110 1 sq. inch = 6.4516 sq. cm 1 sq. in = 6.4516 sq. cmCoal (newcastle) 1,261 100 Slate 2,723 100 1 sq. foot = 929.0304 sq. cm 1 sq. ft = 929.0304 sq. cmCoal (welsh) 1,261 100 Slurry 1,740 85 1 sq. foot = 0.09290 sq. metres 1 sq. ft = 0.09290 sq. mCoke (loose) 597 85 Snow (fresh) 141 110 1 sq. yard = 0.83613 sq. metres 1 sq. yd = 0.83613 sq. mCoke (petroleum) 700 85 Snow (wet) 514 110 1 acre = 0.40469 hectares 1 acre = 0.40469 haCopper (concentratre) 2,300 85 Sodium chloride (dry/salt) 1,300 85Earth (dry loose) 1,112 100 Sugar beet 540 100Earth (wet packed) 1,550 100 Turnips 540 100Fertiliser (mixed) 1,000 85 Wheat 730 85Fertiliser (nitrate) 1,250 85*These figures are approximate and are used as a guide to material density

Volume Conversions

Measurment Conversions

HELPFUL INFORMATION

Weights of Materials ChartMetric to Imperial Conversions

Imperial to Metric Conversions

Metric to Imperial Conversions

Imperial to Metric Conversions

Retail Order Fixed Carriage Charge

Single option/accessory Appropriate Carriages Costs

Three or more implements Free of charge

Alo UK Area Managers. Important: The following delivery charges will apply to all orders below £2,000 retail if delivered by Alo UK.

A premium will be incurred for other carriers.

Single implement £40.00

IMPORTANT INFORMATION. (Read carefully)

Prices apply in U.K. only and include carriage to U.K. mainland address unless shown as ex-works or orders placed under £2,000 retail value (excluding

V.A.T.)Prices and specifications are subject to alteration without notice

All goods supplied remain the property of Alo UK until full payment is receivedAny delivery dates quoted are approximate only and orders not executed prior

to further price increase will be charged at prices applicable at the time of the despatch.

A refurbishment charge will apply to any goods returned to Alo UK which are not in a resaleable condition, this includes incorrectly ordered goods or

goods no longer required.Parts missing from returned kits/loaders will also be charged.

Boxed goods stored outside will incur a charge.

CLAIMS: No claim for damage or shortage can be entertained unless the carriers and ourselves are notified in writing within three days of delivery

or in the case of non-delivery, within twenty-one days of date of despatch.

IT IS RECOMMENDED THAT ALL HYDRAULIC SETS AND SUBFRAMES ARE INSTALLED BY EXPERIENCED TECHNICIANS. FAILURE TO DO SO MAY

QUESTION THE VALIDITY OF WARRANTY ON THE PRODUCT.

Placement of your order is your agreement to these conditions.

Alo UK Ltd315 Elm DriveHartlebury Trading EstateHartleburyWorcestershire. DY10 4JB. UKPhone: 01299 250922 Fax: 01299 250944E-mail: [email protected]: www.alo.uk.com, www.quicke.uk.com, www.trima.uk.com www.facebook.com/AloUKLtd

Alastair Thomson07713 [email protected]

Edward Grierson07713 [email protected]

Simon Hewitt07836 364233

[email protected]

John Pidgeon07964 005989

[email protected]

pdf retail price list v2 – quicke | en versa-x and implement r… · 2vjdlf 7fstb 94fsjft .je...

Documents