pdc-12600 12 volt 60.0 ah @ 20-hr. rate 55.0 ah. recognized under file number mh 20845 • • •...

2
Sealed Rechargeable AGM Deep Cycle Battery PDC SERIES PDC-12600 12 Volt 60.0 A.H. Power-Sonic Corporation Pb www.power-sonic.com ® L HT W H Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Physical Dimensions: in (mm) Features Absorbent Glass Mat (AGM) technology for superior performance Valve regulated, spill proof construction allows safe operation in any position Oversize negative plates and a specialized paste formulation provide true deep cycle performance. Special additives in the paste ensure superior performance in deep discharge situations. Power/volume ratio yielding unrivaled energy density Rugged impact resistant ABS case and cover (UL94-HB) Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified U.L. recognized under file number MH 20845 Performance Specifications Nominal Voltage ........................................................................ 12 volts (6 cells) Nominal Capacity 20-hr. (3.00A to 10.50 volts) .......................................................... 60.0 AH 10-hr. (5.50A to 10.50 volts) .......................................................... 55.0 AH 8-hr. (6.61A to 10.50 volts) .......................................................... 52.9 AH 5-hr. (9.65A to 10.20 volts) .......................................................... 48.2 AH 1-hr. (35.5A to 9.00 volts) ............................................................ 35.5 AH 15-min. (108.6A to 9.00 volts) ............................................................. 27.2 AH Approximate Weight ........................................................... 39.0 lbs. (17.7 kg) Energy Density (20-hr. rate) ............................... 1.77 W-h/in3 (107.83 W-h/l) Specific Energy (20-hr. rate) .............................. 18.15 W-h/lb (40.02 W-h/kg) Internal Resistance (approx.) ...................................................... 7.5 milliohms Max Discharge Current (7 Min.) .............................................. 177.0 amperes Max Short-Duration Discharge Current (10 Sec.) ................ 590.0 amperes Shelf Life (% of nominal capacity at 68°F (20°C)) 1 Month ...................................................................................................... 97% 3 Months..................................................................................................... 91% 6 Months .................................................................................................... 83% Operating Temperature Range Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C) Discharge ....................................................... -40°F (-40°C) to 140°F (60°C) Case ...................................................................................................... ABS Plastic Power-Sonic Chargers ........................................................ PSC-1210000A-C* * Only available for use with input voltages of 90-132V 60 Hz PDC-12600 www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice. Terminals (mm) L: 9.04 (230) W: 5.45 (138) H: 8.66 (220) HT: 9.06 (230) 12 Volt 60.0 AH @ 20-hr. rate 55.0 AH @ 10-hr. rate 18 22 17.4 10 9 9 8.5 13 18 22 15.9 10 8.5 13 Positive Terminal Negative Terminal U: Universal terminals: Heavy-duty posts with ‘nut & bolt’ fasteners

Upload: dodat

Post on 17-Apr-2018

216 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: PDC-12600 12 Volt 60.0 AH @ 20-hr. rate 55.0 AH. recognized under file number MH 20845 • • • • • • • • Performance Specifications Nominal Voltage.....12 volts (6 cells

Sealed RechargeableAGM Deep Cycle Battery

PDC SERIES

PDC-1260012 Volt 60.0 A.H. Power-Sonic Corporation

BAT

T ERY

MUSTB ER

ECYC

LED

PbNONSPILLABLE

www.power-sonic.com

MH20845

®

L

HT

W

H

Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice.

Physical Dimensions: in (mm)

Features

Absorbent Glass Mat (AGM) technology for superior performance

Valve regulated, spill proof construction allows safe operation in any position

Oversize negative plates and a specialized paste formulation provide true deep cycle performance.

Special additives in the paste ensure superior performance in deep discharge situations.

Power/volume ratio yielding unrivaled energy density Rugged impact resistant ABS case and cover (UL94-HB) Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and

C.A.B. certified U.L. recognized under file number MH 20845

•••

Performance SpecificationsNominal Voltage ........................................................................ 12 volts (6 cells)

Nominal Capacity

20-hr. (3.00A to 10.50 volts) .......................................................... 60.0 AH

10-hr. (5.50A to 10.50 volts) .......................................................... 55.0 AH

8-hr. (6.61A to 10.50 volts) .......................................................... 52.9 AH

5-hr. (9.65A to 10.20 volts) .......................................................... 48.2 AH

1-hr. (35.5A to 9.00 volts) ............................................................ 35.5 AH

15-min. (108.6A to 9.00 volts) .............................................................27.2 AH

Approximate Weight ........................................................... 39.0 lbs. (17.7 kg)

Energy Density (20-hr. rate) ............................... 1.77 W-h/in3 (107.83 W-h/l)

Specific Energy (20-hr. rate) .............................. 18.15 W-h/lb (40.02 W-h/kg)

Internal Resistance (approx.) ...................................................... 7.5 milliohms

Max Discharge Current (7 Min.) .............................................. 177.0 amperes

Max Short-Duration Discharge Current (10 Sec.) ................ 590.0 amperes

Shelf Life (% of nominal capacity at 68°F (20°C))

1 Month ...................................................................................................... 97%

3 Months ..................................................................................................... 91%

6 Months .................................................................................................... 83%

Operating Temperature Range

Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C)

Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)

Case ...................................................................................................... ABS Plastic

Power-Sonic Chargers ........................................................ PSC-1210000A-C* * Only available for use with input voltages of 90-132V 60 Hz

PDC-12600

www.power-sonic.comTo ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.All data subject to change without notice.

Terminals (mm)

L: 9.04 (230) W: 5.45 (138) H: 8.66 (220) HT: 9.06 (230)

12 Volt 60.0 AH @ 20-hr. rate 55.0 AH @ 10-hr. rate

18 22

17.4

10

9 9

8.5

13

18 22

15.9

108.

5

13

Positive Terminal Negative Terminal

U: Universal terminals: Heavy-duty posts with ‘nut & bolt’ fasteners

Page 2: PDC-12600 12 Volt 60.0 AH @ 20-hr. rate 55.0 AH. recognized under file number MH 20845 • • • • • • • • Performance Specifications Nominal Voltage.....12 volts (6 cells

ChargingCycle Applications: Limit initial current to 17.7A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 590mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.

“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.

Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.

ChargersPower-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models.

Discharge Characteristics

PDC-12600 12 Volt 60.0 AH @ 20-hr. rate, 55.0 AH @ 10-hr. rate®

Further InformationPlease refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc..

1 2 4 6 8 10 20 40 60 2 4 6 8 10 20min h

4.0

4.5

5.0

5.5

6

6V Battery(V)

12V Battery(V)

.0

6.5

0 200 400 600 800 1000 1200 1400 1600 1800

20

40

60

80

100

120

0-20 -10 0 10 20 30 40 500

20

40

60

80100

120 0.05CA0.10 CA0.20CA

1CA0.5CA

2CA3CA

8 10 120

4 6

60

80

100

0 2

20

40

A

B

C

0 4 8 12 16 20 24 28

% (A) (V/cell)

Term

inal

Vol

tage

(V)

Cap

acity

Rat

io (%

)

Cap

acity

(%)

Rem

aini

ng C

apac

ity (%

)

Temperature(°C)

Temperature: 25°C ChargeVolume

ChargingCurrent

ChargedVoltage Charge at 0.1C Amp Initial Charging Current and

2.45V/Cell Constant Voltage at 25°C

Discharge TimeCharging Time (Hours)

Number of Cycles

Storage Time (Months)

A

B

C

10°C

100%DOD

50%DOD

30%DOD

30°C40°C

No supplementary charge required(Carry out supplementary charge before use if 100% capacity is required.)

Supplementary charge required before use.Optional charging way as below:1.Charged for above 3 days at limted current 0.25CA and constant volatge 2.25V/cell.2.Charged for above 20hours at limted current 0.25CA and constant volatge 2.45V/cell.3.Charged for 8~10hours at limted current 0.05CA .

Supplementary charge may often fail to recover the capacity.The battery should never be left standing till this is reached

25°C

Testing conditionDischarging:current 0.17C (FV 1.7V/cell);Charging:current 2.45V/cell,max. 0.25CA;Charging volume:125% of discharged capacity.

13.0

12.0 120

0.1C

0.08C

0.06C

0.04C

0.02C

2.5

2.4

2.3

2.2

2.1

0C

100

80

60

40

20

11.0

10.0

9.0

8.0

2.95A5.5A11.8A

20.1A35.5A60.5A143A209A

Charged Volume

Charge Voltage(Constant 2.45V/Cell)

After 50% DischargeAfter 100% Discharge

Charging Current(Initial at 0.1C Amp)

1 2 4 6 8 10 20 40 60 2 4 6 8 10 20min h

4.0

4.5

5.0

5.5

6

6V Battery(V)

12V Battery(V)

.0

6.5

0 200 400 600 800 1000 1200 1400 1600 1800

20

40

60

80

100

120

0-20 -10 0 10 20 30 40 500

20

40

60

80100

120 0.05CA0.10 CA0.20CA

1CA0.5CA

2CA3CA

8 10 120

4 6

60

80

100

0 2

20

40

A

B

C

0 4 8 12 16 20 24 28

% (A) (V/cell)

Term

inal

Vol

tage

(V)

Cap

acity

Rat

io (%

)

Cap

acity

(%)

Rem

aini

ng C

apac

ity (%

)

Temperature(°C)

Temperature: 25°C ChargeVolume

ChargingCurrent

ChargedVoltage Charge at 0.1C Amp Initial Charging Current and

2.45V/Cell Constant Voltage at 25°C

Discharge TimeCharging Time (Hours)

Number of Cycles

Storage Time (Months)

A

B

C

10°C

100%DOD

50%DOD

30%DOD

30°C40°C

No supplementary charge required(Carry out supplementary charge before use if 100% capacity is required.)

Supplementary charge required before use.Optional charging way as below:1.Charged for above 3 days at limted current 0.25CA and constant volatge 2.25V/cell.2.Charged for above 20hours at limted current 0.25CA and constant volatge 2.45V/cell.3.Charged for 8~10hours at limted current 0.05CA .

Supplementary charge may often fail to recover the capacity.The battery should never be left standing till this is reached

25°C

Testing conditionDischarging:current 0.17C (FV 1.7V/cell);Charging:current 2.45V/cell,max. 0.25CA;Charging volume:125% of discharged capacity.

13.0

12.0 120

0.1C

0.08C

0.06C

0.04C

0.02C

2.5

2.4

2.3

2.2

2.1

0C

100

80

60

40

20

11.0

10.0

9.0

8.0

2.95A5.5A11.8A

20.1A35.5A60.5A143A209A

Charged Volume

Charge Voltage(Constant 2.45V/Cell)

After 50% DischargeAfter 100% Discharge

Charging Current(Initial at 0.1C Amp)

1 2 4 6 8 10 20 40 60 2 4 6 8 10 20min h

4.0

4.5

5.0

5.5

6

6V Battery(V)

12V Battery(V)

.0

6.5

0 200 400 600 800 1000 1200 1400 1600 1800

20

40

60

80

100

120

0-20 -10 0 10 20 30 40 500

20

40

60

80100

120 0.05CA0.10 CA0.20CA

1CA0.5CA

2CA3CA

8 10 120

4 6

60

80

100

0 2

20

40

A

B

C

0 4 8 12 16 20 24 28

% (A) (V/cell)

Term

inal

Vol

tage

(V)

Cap

acity

Rat

io (%

)

Cap

acity

(%)

Rem

aini

ng C

apac

ity (%

)

Temperature(°C)

Temperature: 25°C ChargeVolume

ChargingCurrent

ChargedVoltage Charge at 0.1C Amp Initial Charging Current and

2.45V/Cell Constant Voltage at 25°C

Discharge TimeCharging Time (Hours)

Number of Cycles

Storage Time (Months)

A

B

C

10°C

100%DOD

50%DOD

30%DOD

30°C40°C

No supplementary charge required(Carry out supplementary charge before use if 100% capacity is required.)

Supplementary charge required before use.Optional charging way as below:1.Charged for above 3 days at limted current 0.25CA and constant volatge 2.25V/cell.2.Charged for above 20hours at limted current 0.25CA and constant volatge 2.45V/cell.3.Charged for 8~10hours at limted current 0.05CA .

Supplementary charge may often fail to recover the capacity.The battery should never be left standing till this is reached

25°C

Testing conditionDischarging:current 0.17C (FV 1.7V/cell);Charging:current 2.45V/cell,max. 0.25CA;Charging volume:125% of discharged capacity.

13.0

12.0 120

0.1C

0.08C

0.06C

0.04C

0.02C

2.5

2.4

2.3

2.2

2.1

0C

100

80

60

40

20

11.0

10.0

9.0

8.0

2.95A5.5A11.8A

20.1A35.5A60.5A143A209A

Charged Volume

Charge Voltage(Constant 2.45V/Cell)

After 50% DischargeAfter 100% Discharge

Charging Current(Initial at 0.1C Amp)

1 2 4 6 8 10 20 40 60 2 4 6 8 10 20min h

4.0

4.5

5.0

5.5

6

6V Battery(V)

12V Battery(V)

.0

6.5

0 200 400 600 800 1000 1200 1400 1600 1800

20

40

60

80

100

120

0-20 -10 0 10 20 30 40 500

20

40

60

80100

120 0.05CA0.10 CA0.20CA

1CA0.5CA

2CA3CA

8 10 120

4 6

60

80

100

0 2

20

40

A

B

C

0 4 8 12 16 20 24 28

% (A) (V/cell)

Term

inal

Vol

tage

(V)

Cap

acity

Rat

io (%

)

Cap

acity

(%)

Rem

aini

ng C

apac

ity (%

)

Temperature(°C)

Temperature: 25°C ChargeVolume

ChargingCurrent

ChargedVoltage Charge at 0.1C Amp Initial Charging Current and

2.45V/Cell Constant Voltage at 25°C

Discharge TimeCharging Time (Hours)

Number of Cycles

Storage Time (Months)

A

B

C

10°C

100%DOD

50%DOD

30%DOD

30°C40°C

No supplementary charge required(Carry out supplementary charge before use if 100% capacity is required.)

Supplementary charge required before use.Optional charging way as below:1.Charged for above 3 days at limted current 0.25CA and constant volatge 2.25V/cell.2.Charged for above 20hours at limted current 0.25CA and constant volatge 2.45V/cell.3.Charged for 8~10hours at limted current 0.05CA .

Supplementary charge may often fail to recover the capacity.The battery should never be left standing till this is reached

25°C

Testing conditionDischarging:current 0.17C (FV 1.7V/cell);Charging:current 2.45V/cell,max. 0.25CA;Charging volume:125% of discharged capacity.

13.0

12.0 120

0.1C

0.08C

0.06C

0.04C

0.02C

2.5

2.4

2.3

2.2

2.1

0C

100

80

60

40

20

11.0

10.0

9.0

8.0

2.95A5.5A11.8A

20.1A35.5A60.5A143A209A

Charged Volume

Charge Voltage(Constant 2.45V/Cell)

After 50% DischargeAfter 100% Discharge

Charging Current(Initial at 0.1C Amp)

Cycle Life in Relation to Depth of Discharge

1 2 4 6 8 10 20 40 60 2 4 6 8 10 20min h

4.0

4.5

5.0

5.5

6

6V Battery(V)

12V Battery(V)

.0

6.5

0 200 400 600 800 1000 1200 1400 1600 1800

20

40

60

80

100

120

0-20 -10 0 10 20 30 40 500

20

40

60

80100

120 0.05CA0.10 CA0.20CA

1CA0.5CA

2CA3CA

8 10 120

4 6

60

80

100

0 2

20

40

A

B

C

0 4 8 12 16 20 24 28

% (A) (V/cell)

Term

inal

Vol

tage

(V)

Cap

acity

Rat

io (%

)

Cap

acity

(%)

Rem

aini

ng C

apac

ity (%

)

Temperature(°C)

Temperature: 25°C ChargeVolume

ChargingCurrent

ChargedVoltage Charge at 0.1C Amp Initial Charging Current and

2.45V/Cell Constant Voltage at 25°C

Discharge TimeCharging Time (Hours)

Number of Cycles

Storage Time (Months)

A

B

C

10°C

100%DOD

50%DOD

30%DOD

30°C40°C

No supplementary charge required(Carry out supplementary charge before use if 100% capacity is required.)

Supplementary charge required before use.Optional charging way as below:1.Charged for above 3 days at limted current 0.25CA and constant volatge 2.25V/cell.2.Charged for above 20hours at limted current 0.25CA and constant volatge 2.45V/cell.3.Charged for 8~10hours at limted current 0.05CA .

Supplementary charge may often fail to recover the capacity.The battery should never be left standing till this is reached

25°C

Testing conditionDischarging:current 0.17C (FV 1.7V/cell);Charging:current 2.45V/cell,max. 0.25CA;Charging volume:125% of discharged capacity.

13.0

12.0 120

0.1C

0.08C

0.06C

0.04C

0.02C

2.5

2.4

2.3

2.2

2.1

0C

100

80

60

40

20

11.0

10.0

9.0

8.0

2.95A5.5A11.8A

20.1A35.5A60.5A143A209A

Charged Volume

Charge Voltage(Constant 2.45V/Cell)

After 50% DischargeAfter 100% Discharge

Charging Current(Initial at 0.1C Amp)

Charging Characteristics (Cycle Use)

Temperature Effects in Relation to Battery Capacity

Self Discharge Characteristics

CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650

CUSTOMER SERVICETel: +1-619-661-2030 Fax: [email protected]

INTERNATIONAL SALESTel: +1-650-364-5001 Fax: [email protected]

DOMESTIC SALESTel: +1-619-661-2020Fax: [email protected]

TECHNICAL SUPPORTTel: +1-619-661-2020 Fax: [email protected]

Contact Information www.power-sonic.com

1012 1M

© 2012. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.