Safety Precautions ................................................................................. i, iiIntroduction ............................................................................................. 1Inspecting For Damage ............................................................................. 2Overview .................................................................................................. 2Installation Sequence ............................................................................... 2Speaker Placement ................................................................................... 3Speaker Wiring Diagram .......................................................................... 4Satellite Connections ................................................................................ 5Attaching The Desktop Stands ................................................................. 6Attaching The Floor Stands ...................................................................... 6Power Supply Adapter .............................................................................. 7The Volume Control .................................................................................. 8Mounting the Volume Control .................................................................. 9Adjusting Output Level ............................................................................. 9Subwoofer Level Control ........................................................................ 10Important ............................................................................................... 10Optimizing The Sound Of Your System .................................................. 11Mounting the Satellites .......................................................................... 11Specifications ......................................................................................... 12Technical Support ................................................................................... 12Warranty Information ............................................................................ 14

Contents

PCWorksFourPointSurround

Instructions for:

SHOCK HAZARDDO NOT OPEN

WARNINGRISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

The exclamation point within an equilateraltriangle is intended to alert the user of thepresence of important operating and main-tenance (servicing) instructions in the lit-erature accompanying this product.

CAUTION: TO PREVENT ELECTRICSHOCK, MATCH WIDE BLADE OF PLUGTO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCSELECTRIQUES, INTRODUIRE LA LAME LA PLUSLARGE DE LA FICHE DANS LA BORNECORRESPONDANTE DE LA PRISE ET POUSSERJUSQUAU FOND.

WARNING:TO PREVENT FIRE ORSHOCK HAZARD, DO NOTEXPOSE THIS APPLIANCETO RAIN OR MOISTURE.

IMPORTANT NOTICEThe serial number for the PC WorksFourPointSurround is located on the subwoofer.Please write this number down and keep it in asecure area. This is for your security.

IMPORTANT

The lightning flash with arrowhead, withinan equilateral triangle, is intended to alertthe user of the presence of uninsulateddangerous voltage within a products en-closure that may be of sufficient magnitudeto constitute the risk of electric shock topersons.

TO PREVENT THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SUBWOOF-ERS COVER. NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL.

POUR EVITER TOUT RISQUE DE CHOCELECTRIQUE, NE PAS DEMONTER LECOUVERCLE DU HAUT PARLEUR.AUCUN ENTRETIEN DES PIECESINTERIEURES NEST REQUIS.TOUTSERVICE DENTRETIEN NE DOIT ETREEFFECTUE QUE PAR DU PERSONNELDENTRETIEN QUALIFIE.

READ AND HEED IMPORTANT SAFETY WARNINGON BOTTOM OF SUBWOOFER ENCLOSURE

i

READ INSTRUCTIONS - All safety and oper-ating instructions should be read before thePCWorks FourPointSurround amplifiedsubwoofer/satellite system is operated.

RETAIN INSTRUCTIONS - The safety andoperating instructions should be retainedfor future reference.

HEED WARNINGS - All warnings on thesubwoofer and in the operating instruc-tions should be adhered to.

FOLLOW INSTRUCTIONS - All operatingand use instructions should be followed.

CLEANING - Unplug the subwoofer from thewall outlet or other power source beforecleaning. Do not use liquid cleaners oraerosol cleaners. Use a damp cloth forcleaning.

ATTACHMENTS - Do not use attachmentsnot recommended by CambridgeSoundWorks as they may cause hazards.

WATER AND MOISTURE - Do not use thesubwoofer near waterfor example, neara bath tub, wash bowl, kitchen sink, orlaundry tub; in a wet basement; or near aswimming pool; and the like.

ACCESSORIES - Do not place the PC WorksFourPointSurround system on an unstablecart, stand, tripod, bracket, or table. Thesubwoofer or satellites may fall, causingserious injury to a child or adult, andserious damage to the product. Use onlywith a cart, stand, tripod, bracket, or tablerecommended by Cambridge Sound-Works, or sold with the product. Any mount-ing of the satellites or subwoofer should

follow the manufacturers instructions, andshould use a mounting accessory recom-mended by Cambridge SoundWorks.

VENTILATION - Slots and openings in thecabinet are provided for ventilation and toensure reliable operation of the subwooferand to prevent it from overheating, andthese openings must not be blocked orcovered. The openings should never beblocked by placing the product on a bed,sofa, rug, or other similar surface. Thesubwoofer should not be placed in a built-in installation such as a bookcase or rackunless proper ventilation is provided orCambridge SoundWorks instructionshave been adhered to.

HEAT - The subwoofer should be situatedaway from heat sources such as radia-tors, heat registers, stoves, and otherproducts (including amplifiers) that pro-duce heat.

POWER SOURCES - The subwoofer shouldbe operated only from the type of powersource indicated on the marking label. Ifyou are not sure of the type of powersupply to your home, consult your productdealer or local power company. For prod-ucts intended to operate from batterypower, or other sources, refer to the oper-ating instructions.

POLARIZATION - The subwoofer may beequipped with a polarized alternating-cur-rent line plug (a plug having one bladewider than the other). This plug will fit intothe power outlet only one way. This is a

safety feature. If you are unable to insertthe plug fully into the outlet, try reversingthe plug. If the plug should still fail to fit,contact your electrician to replace yourobsolete outlet. Do not defeat the safetypurpose of the polarized plug.

POWER-CORD PROTECTION - Power-sup-ply cords should be routed so that they arenot likely to be walked on or pinched byitems placed upon or against them, pay-ing particular attention to cords at plugs,convenience receptacles, and the pointwhere they exit from the subwoofer.

LIGHTNING - For added protection for thePCWorks FourPointSurround system dur-ing a lightning storm, or when it is leftunattended and unused for long periodsof time, unplug it from the wall outlet. Thiswill prevent damage to the subwoofer dueto lightning and power-line surges.

OVERLOADING - Do not overload wall out-lets, extension cords, or integral conve-nience receptacles as this can result in arisk of fire or electric shock.

OBJECT AND LIQUID ENTRY - Never pushobjects of any kind into the subwooferthrough openings as they may touch dan-gerous voltage points or short out partsthat could result in a fire or electric shock.Never spill liquid of any kind on the sub-woofer.

SERVICING - Do not attempt to service thesubwoofer yourself as opening or remov-ing covers may expose you to dangerousvoltage or other hazards. Refer all servic-ing to qualified service personnel.

DAMAGE REQUIRING SERVICE - Unplugthe subwoofer from the wall outlet or otherpower source and refer servicing to quali-fied service personnel under the followingconditions:a) When the power-supply cord or plug isdamaged.b) If liquid has been spilled, or objectshave fallen into the subwoofer.c) If the subwoofer has been exposed torain or water.d) If the subwoofer does not operate nor-mally by following the operating instruc-tions; or exhibits a distinct change in per-formance.e) If the product has been dropped ordamaged in any way.

REPLACEMENT PARTS - When replace-ment parts are required, be sure the ser-vice technician has used replacementparts specified by Cambridge SoundWorksor have the same characteristics as theoriginal part. Unauthorized substitutionsmay result in fire, electric shock, or otherhazards.

SAFETY CHECK - Upon completion of anyservice or repairs to the PC WorksFourPointSurround system, ask the ser-vice technician to perform safety checksto determine that the PC Works Four PointSurround system is in proper operatingcondition.

WALL OR CEILING MOUNTING - ThePC Works FourPointSurround satellitesshould be mounted to a wall or ceiling onlyas recommended by CambridgeSoundWorks.

IMPORTANT SAFETY INSTRUCTIONS

ii

1hank you for purchasingPCWorks FourPointSurroundby Cambridge SoundWorks.PCWorks FourPointSurround

IntroductionCambridge SoundWorks

1-877-YES-HIFI(1-877-937-4434)

24 hours a day,every day

In Canada: 1-800-987-9104Outside US or Canada:

Tel: 617-332-5936Fax: 617-527-3194

www.cambridgesoundworks.comE-mail:

info@cambridgesoundworks.com

Tlets you experience the fullpotential of the multichannelsound encoded in todays latestcomputer software. We think youwill find it adds an exciting newdimension to computer sound andgaming.

2Volume Control with 12 ft. audio connecting cable and stereo mini-plugs*

R

E

A

R

L

E

F

T

F

R

O

N

T

L

E

F

T

Subwoofer/amplifier

Satellites: (2) with 9 ft. speaker wire attached, (2) with 12 ft. speaker wire attached

Desktop Stands for satellites (4) Semipermanent mounting strip (1) for attaching volume control

DC Power Adapter

(4) Hook& Loop fasteners for the satellite cubes

(one each)

(4) Solid Legs

Labels

(6) Rubber foot plugs

REARLEFT

REARRIGHT

FRONTRIGHT

R

E

A

R

R

I

G

H

T

F

R

O

N

T

R

I

G

H

T

FRONTLEFTFR

ONT

LEFT

REAR

LEFT

FRON

TRI

GHT

REAR

RIGH

T

Strips of 5 feet (4)

(2) Apex Joints

(2) Slotted Legs

FR

FR

Installation SequenceInspectingFor DamageExamine each speaker unit carefully forsigns of shipping damage. If there is anydamage do not install the system.

If there is any problem, call theappropriate number listed in thewarranty information.

All the items shown in the illustrationshould be included. If anything ismissing, notify the retailer.

Save the carton and its inserts in caseyou need to transport your PCWorksFourPointSurround system later.

1. Read through the instructionsbefore installing the speakers. Theinstructions assume you have a4-channel sound card, one thatsupports DirectSound3D and hasfront and rear stereo outputs. Ifyour sound card has a singlestereo minijack line output, pleaseread the note under VolumeControl on page 8.

2. Place the satellites and thesubwoofer at appropriate sitesnear your computer. Attach thestands, if necessary.

3. To help you identify eachsatellites channel later, applythe appropriate preprinted labelto the rear of each satellite. Besure both the satellites chosenfor the front and rear have thesame cable length.

4. Connect the four satellites to theback of the subwoofer enclosure.Leave all the wires accessible.

PCWorks FourPointSurround consistsof a powered subwoofer, four satellitespeakers and a volume control. Allfive speakers are magneticallyshielded.

The subwoofer is designed to sit onthe floor beneath a desk, and soundsbest in this position. The satellitesused for the front left and rightchannels should flank the computermonitor. The satellites used for therear left and right channels can beplaced on the desktop, on floorstands, or attached to other sites withhook and loop fasteners.

Overview

3A C DB

Speaker PlacementThe front left and front rightsatellites should be placed to thesides of the monitor. When placingsatellites on the desktop, installthe desktop stands. If you wish tosave desktop space, use the hookand loop fasteners to attach thesatellites to the sides of thecomputer monitor (see page 11).

If your are lucky enough to haveside walls close to your listeningposition, excellent placement for theleft rear and right rear satellites isalongside or behind your listeningposition, slightly above ear level(use the hook and loop fasteners,see diagram A). Do not beconcerned if this is not practical,since any rear satellite placement to

front satellites. Try the extremecorners of a desk using the desktopstands (C) or attach the rear satellitesunder a desktop or at the sides of adesk using the hook and loopfasteners (D).

The subwoofer does not contributeto directional sound effects. Itsoptimum position is on the flooragainst the wall. The closer thesubwoofer is to the corner, thestronger the maximum bass output.Alternately, it can be placed on a shelfor other sites, but its maximumoutput will be reduced.

the left and right side of thelistening position will provide strongdirectional and surround effects.

The rear satellites may be installedon their convenient floor stands (seediagram B). When listening, thestands should be positioned to theimmediate left and right of yourlistening position. The stands aresmall enough to be stowedunderneath or alongside a deskwhen not in use.

The rear satellites may also beplaced in any convenient sitesalongside the listener, including sitesslightly forward of the listeninglocation. The rear satellites do nothave to be at exactly the sameheight, nor at the same height as the

5. Connect the Volume Control tothe subwoofer and then to thesound card line outputs.

6. Connect the power supplyadapter.

7. Listen to the system and adjustthe Subwoofer Level control forthe most pleasing bass output.

8. You may wish to experimentwith satellite placement brieflybefore concealing the connectingwires and making the installa-tion more permanent.

4Speaker Wiring Diagram

CAMBRIDGESOUNDWORKSCAMBRIDGESOUNDWORKSCAMBRIDGESOUNDWORKS

FRONTLEFT

FRONTRIGHT

REARLEFT

REARRIGHT

BASSLEVEL

AUDIO INPUTS

POWERON/OFF

CAMBRIDGE SOUNDWORKS NEWTON, MASSACHUSETTS USA

12V DC IN

REARFRONT

REARLEFT

FRONTLEFT

REARRIGHT

FRONTRIGHT

PCWORKS

FOURPOINTSURROUND

SPEAKERS

FRONTLEFT

FRONTRIGHT

REARLEFT

REARRIGHT

One pair of satellites has cables9 feet (3 meters) long; the otherpairs cables are 12 feet (4 meters)long. Typically, the satellites inthe rear will require longer cablelengths, but the satellites areotherwise identical. If you needextra cable length for the frontchannel satellites, use the oneswith longer cable there instead.

A panel of eight self-adhesivelabels is provided to identify eachsatellite. To start, apply the small,square FRONT RIGHT label to theback of a satellite (see diagram A).Then wrap the remaining, longerFRONT RIGHT label around thesatellite cable just behind the plug(see diagram B).

Insert the satellites plug intothe corresponding output jack onthe subwoofer (see Speaker WiringDiagram).

Repeat the process for theremaining three satellites.

Satellite Connections

5

FRONTLEFT

FRONTLEFT

R

E

A

R

L

E

F

T

F

R

O

N

T

L

E

F

T

REARLEFT

REARRIGHT

FRONTRIGHT

R

E

A

R

R

I

G

H

T

F

R

O

N

T

R

I

G

H

T

FRO

NTLE

FTRE

ARLE

FTFR

ONT

RIG

HTRE

ARRI

GHT

BA

6Attaching The Desktop StandsFor most applications, the satellitespeakers should be used with theirdesktop stands. Install each standby inserting it into the Tshaped socket in the back of eachsatellite. Make sure to feed thewires through the cut-out in thetop of the desktop stands (seediagram C).

For desktop placement, applythe five self adhesive feet to thebase of the desktop stands. If youwish to install the rear satellitesin the floor stands, do not applythe self adhesive feet to the baseof their desktop stands (seediagram D).

D

C

Attaching The Floor Stands 3. Insert the two solid legs into

the outside sockets in theapex joint.

4. Slide the back of the satellitesdesktop stand into the front ofthe slot in the apex joint. Theslots front is the side furtheraway from the rear leg socket.Make sure the stand issecurely pressed into the slot(see Diagram F).

5. At the base of the rear leg,gently pull on the satellitecable to remove any unneces-sary slack in the cable.

6. Insert a rubber plug into thebase of each leg, taking careto feed the cable out the shortnotch in the rear leg (seeDiagram G).

The rear satellites (with theirdesktop stands attached) may beinstalled in their floor stands.1. One leg of each floor stand

has a full length slot, withshort notches opposite theslot at each end. Insert asatellite cable inside one ofthese legs by feeding it downthe length of the full lengthslot. At each end, feed thecable through the shortnotches (see Diagram E).

2. Ensure there are no feetattached to the satellitesdesktop stand. Insert thesatellite end of the leg/cableassembly into the middlesocket of the apex joint. Makesure the satellite cable exitsthrough the short notch andnot the full length slot (seeDiagram F).

E

7G

F

Power Supply AdapterConfirm that the power switch isin the OFF position. Insert thepower supplys AC plug into theappropriate receptacle. Insert thesmall DC connector into the12V DC IN receptacle on theback of the subwoofer.

LINE/FRONT OUT(typically green)

REAR OUT(typically black)

FOUR CHANNEL SOUND CARD

LINE

SUB

BASSLEVEL

AUDIO INPUTS

POWERON/OFF

CAMBRIDGE SOUNDWORKS NEWTON, MASSACHUSETTS USA

12V DC IN

REARFRONT

REARLEFT

FRONTLEFT

REARRIGHT

FRONTRIGHT

PCWORKS

FOURPOINTSURROUND

SPEAKERS

F RF R

8

The Volume ControlThe PCWorks FourPointSurroundsystem comes with a separatewired Volume Control, designed tobe positioned close at hand andaffixed with the semipermanentmounting strip.

Each plug has either an F oran R molded into it. One pair ofplugs connects to the audio inputson the back of the subwoofer(SUB). The other pair connects tothe sound card line outputs(LINE). Connect the two pairs ofsignal plugs before affixing theVolume Control (see diagram atright). Connect the F LINE plugto the front stereo line outputminijack of your sound card.Connect the R LINE plug to therear or surround line outputminijack of your sound card.

Connect the F SUB plug to theFront minijack input on theSubwoofer. Connect the R SUBplug to the Rear minijack input onthe Subwoofer (see diagram H).

At this point you may now turnthe power switch ON.

If you have a stereo soundcard(one without a rear stereo minijackline output), connect the F LINEplug to the stereo line output

minijack of your soundcard (seediagram I). Leave the R LINEplug unconnected. Connect the

F SUB plug to the Front mini-jack input on the subwoofer. Leavethe R LINE plug unconnected.

If you upgrade to a four-channelsound card, connect both F andR LINE and SUB plugs to thesoundcard and subwoofer andenjoy full surround sound.Note: When only one of the twostereo inputs on the subwoofer isused (either Front or Rear), thestereo signal will be reproduced byboth the front and rear pairs ofsatellites.

H I

LINE/FRONT OUT(typically green)

UNUSED

UNUSED

TWO CHANNEL SOUND CARD

LINE

SUB

BASSLEVEL

AUDIO INPUTS

POWERON/OFF

CAMBRIDGE SOUNDWORKS NEWTON, MASSACHUSETTS USA

12V DC IN

REARFRONT

REARLEFT

FRONTLEFT

REARRIGHT

FRONTRIGHT

PCWORKS

FOURPOINTSURROUND

SPEAKERS

F

R

F

R

9Adjusting Output LevelIn most instances, the PCWorksFourPointSurround Volume Controlwill be the most convenient way toadjust the overall playback level. Itresponds instantly and doesntrequire you to pause games orprograms. But there are otheroutput level controls present insoftware to consider.

Versions of Microsoft Windowsand most other operating systemsoffer an on-screen sound levelcontrol, while most game pro-grams provide yet another one.For the PCWorks FourPointSurroundVolume Control to perform at itsbest, these software levelcontrols should be set to anoptimum position and thenleft alone.

Set any software volumecontrols to approximately 75% oftheir maximum output level. Thisshould allow the PCWorks Four-PointSurround Volume Controlto achieve the highest outputlevel desired when set to itsloudest setting.

If the PCWorks FourPoint-Surrounds maximum output isstill not sufficient at the extremesetting of its Volume Control, tryincreasing one and only one ofthe software volume controls toincrease overall output.

If you find the optimum outputlevel of the PCWorks FourPoint-Surround system occurs at too lowa setting of its volume control,reduce the setting of one softwarevolume control (preferably theoperating systems output levelcontrol) to achieve greatercontrol range.Note: Some software volumecontrols may introduce distortionwhen set to their maximum level.Experiment to achieve thecleanest sound.

Mounting The Volume Control

CAMBRID

GE

SOUNDWO

RKS

2 Press exposed adhesive sidefirmly against back of volumecontrol.

Remove protective paper from oneside to reveal adhesive.

4 Press control firmly againstmounting surface(desktop, keyboard or monitor).

Remove remaining paper strip.

The enclosed mounting strip issemipermanentit holds well butcan be peeled off gently. Be surethat the mounting surface, such asthe computer monitor or yourdesktop, is smooth and clean.

CAM

BRID

GESO

UNDW

ORKS

1

3

10

The output of the subwoofershould be adjusted to suit thelisteners taste. Start with thevolume control in the 12 oclockposition (see diagram below).After using the system for a littlewhile, adjust the control up ordown to fine tune it.

Subwoofer Level Control

BASSLEVEL

AUDIO INPUTSREARFRONT

REARFRONT

ImportantPlayback LevelsPCWorks FourPointSurround isintended for individual or smallgroup listening and will achievesurprisingly high output levels.However, playing the systemcontinuously at overly loud,distorted levels on heavy bassprogram material may cause itsinternal fuse to blow.

The fuse can be replaced only bya qualified representative. To avoidthis inconvenience and a possiblenon-warranty repair charge,reduce the playback volume whenthe system shows obvious signs ofstress, i.e. it sounds raspy,fuzzy, and/or muddy.

11

Mounting The SatellitesTo a flat surface:To mount the satellites the side ofa monitor or other flat surface,use the self-adhesive hook andloop fastener squares.

To the wall:To wall-mount the cubes onstructurally strong surfaces (awall stud or wood panelling),screw the No. 10 screws into thematerial. Allow their heads toprotrude about 1/4 inch to fit into

results from the subwoofer placedon the floor in a corner. The leastbass output results with the unitpositioned away from any corners orwalls.

Once you have adjusted thesubwoofer level control, leave it inthat position. It should not be usedto compensate for differences inrecordings or games.

Have a clear line of sight from yourlistening position to the satellites.This prevents their higher frequen-cies from being blocked. It is notnecessary for each satellite to beaimed directly at the listener.

The relative strength of low bassdepends on how close thesubwoofer is to intersecting roomsurfaces. The most bass output

Optimizing The SoundOf Your System the keyhole slots on the back ofeach cube (as shown below).

The plastic anchors supplied willbe needed to secure the screws inmost wall surfaces. If so, drill 1/4inch holes in the wall, then tap theanchors into the holes until theyare flush with the wall. Then screwthe screws into the anchors untilthey protrude about 1/4 inch.

Be sure to apply the stick-onrubber feet to the back of the satel-lite cubes. This assures an acousti-cally secure installation.

Hook and loop fastener mounting Keyhole slot mounting

12

Technical SupportInside U.S.A., Canada and Latin AmericaCreative Labs Inc. Technical SupportIf you need technical assistance, call 405-742-6622. Technical support isavailable seven days a week from 8:00 am to midnight, Central time.

You can get the latest program and driver updates from Creative Labs bulletinboard, 24 hours a day. Call 405-742-6660; use modem settings:

Baud rate: 300 to 14400(V.32/V.42 bis)

Data bits: 8Parity: noneStop bits: 1

You can also send a FAX at 405-742-6633 or write us at:

Technical SupportCreative Labs, Inc.1523 Cimarron PlazaStillwater, OK 74075

To reach Creative Technical support via the Internet, visit our technical supportweb site at http://www.creativehelp.com, for troubleshooting help.

For information about this product and other Creative Labs products, visitCreative Zone at http://www.soundblaster.com. Or, call customer Service at800-998-1000

Faxback information is available by calling 405-372-5227

SpecificationsPCWorks FourPointSurrounds

Five-channelAmplifier Specifications

Satellite amplifier: One channeldriven into a 4 ohm load at less than1% total harmonic distortion, at1kHz: 3.5 watts RMS.

Subwoofer amplifier: With a4 ohm load at less than 1% totalharmonic distortion, at 100Hz:10 watts RMS.

These specifications apply to aPCWorks FourPointSurroundoperating from a 120 VAC lineand a 12V DC power adapter.

13

Inside EuropeCreative Labs (Ireland) Ltd. Technical SupportBallycoolin Business Park, Blanchardstown Dublin, 15 Ireland

Ireland Tel: +353 1 820 7555Fax: +353 1 820 5052BBS: +353 1 820 3784 (HST)

+353 1 820 3818 (ZyXEL)Belgium Tel: +32 32300997 (French)(for Benelux) Fax: +32 32300998 (Dutch)

BBS: +32 3281 4631 (HST V.34)+32 3281 4632 (V.34)

Denmark Tel: 8001 7177 (Freephone)BBS: +45 4824 4351 (HST V.34)

+45 4824 4361 (V.34)Finland Tel: 08001 18052 (Freephone)

BBS: +45 4824 4351 (HST V.34)+45 4824 4361 (ZyXEL 19,200)

France Tel: +33 1 39 20 04 21Fax: +33 1 39 20 90 10BBS: +33 1 39 20 90 43 (HST)

+33 1 39 20 90 47 (V.32bis)Minitel: 3615 CREATIVE and 3617 CREATIVE

Germany Tel: +49 089 9579081(for central and Fax: +49 089 9577453Eastern Europe) BBS: +49 089 9577274

Holland Tel: +3115578244Italy Tel: +39 2 982 4 4100Norway Tel: 800 11663 (Freephone)

BBS: +45 4824 4351 (HST V.34)+45 4824 4361 (ZyTEL 19,200)

Scandinavia Tel: +45 4824 4322Fax: +45 4824 4323

Spain Tel: 900 953536 (Freephone)Sweden Tel: 020 791088 (Freephone)

BBS: +45 4824 4351 (HST V.34)+45 4824 4361 (ZyTEL 19,200)

UK Tel: +44 01734 344 744Fax: +44 01734 320 271BBS: +44 01743 360 287

Operating hoursMon-Fri: Business HoursSat-Sun: ClosedFaxBack is a facility that allows you to obtain product and technical informationthrough facsimile services. In Europe, use the following number: +353 1 8203667.

Inside AsiaCreative Technology Ltd. Technical Support31 International Business Park,Creative Resource, Singapore 609921

Tel: +65 8954100Fax: +65 8954999BBS: +65 776 2423

Operating hours (Singapore Time)Mon-Thu: 9am-6:30pmFri: 9am-6pmSat-Sun & Public Holidays: Closed

This is the sole and expresswarranty. This warranty is in lieuof all other warranties, expressedor implied, of merchantability,fitness for purpose or otherwise. Inno event shall CambridgeSoundWorks be liable for inciden-tal or consequential damages orhave any liability with respect todefects other than the obligationsset forth as stated.

To ensure warranty coverage, itis incumbent upon the originalpurchaser of PCWorks FourPoint-Surround to inform the retailer ofthe defect within the warrantyperiod. The only acceptable methodof establishing warranty status isa copy of the original proof ofpurchase indicating customersname and purchase date.

For advice about your warranty orany information call an Audio/VideoConsultant at 1-877-YES-HIFI.

1-Year Limited Warrantyo the original purchaser,Cambridge SoundWorks,Inc. will warrant thePCWorks FourPoint-

Surround system to be free ofdefects in material andworkmanship for a period ofone (1) year from date ofpurchase. With respect todefects, Cambridge SoundWorkswill, at its option, replace theproduct or repair the defect inthe product with no charge tothe original purchaser for partsor labor.

This warranty does notextend to any defect, malfunc-tion or failure caused bymisuse, abuse, accident, faultyhookup, defective associatedequipment or use of the speakerwith equipment for which it isnot intended.

This warranty is valid onlywhen the speaker is returned tothe retailer that sold thePCWorks FourPointSurround tothe original purchaser.

14

T

1998 Cambridge SoundWorks, Inc. All rights reserved. Cambridge SoundWorks is a registered trademark, and PCWorks by Henry Kloss is a trademark ofCambridge SoundWorks, Inc., Newton, MA. Blaster and the Creative logo are registered trademarks of Creative Technology Ltd. All other brand and productnames are trademarks or registered trademarks of their respective holders. All specifications are subject to change without prior notice. Actual contents maydiffer from those pictured.

311 Needham Street, Newton MA 024641-877-937-4434 Fax: 617-527-3194

www.cambridgesoundworks.comEmail: info@cambridgesoundworks.com

P81-1240 0400 A Company