OUTSIDE DIMENSIONS (per evaporator coil only)28.8” W x 16.67” D x 72.08” H

OUTPUT CHILLING CAPACITY*1200 lbs within 90 minutes

HEAT LOAD BTU/HR:57,400 per evaporator (172,200 total)- 10° F evaporator temperature/104° F ambient

ELECTRICAL SUPPLY:1 PH/208-240 V/60 Hz

30 A circuit, # 10 wire required

PBC1200-TS 3-Rack 1200 lbs Modular Blast Chiller

© L

PL

10

/20

19

STANDARD FEATURES• New advanced 7” Gorilla glass touch screen controller with USB

port on easy-to-use control panel• Holding cycle: automatically switches over to holding mode after

each cycle is completed• One multi-point product probe registers product temperatures• Meets the demands of HACCP guidelines for proper food chilling • Automatic defrost• Evaporator is enclosed in a frame and cabinet• Programmable controller with up to 99 customized options

WARRANTY• Two years warranty on parts and labor• Additional warranty for years 3-5 on compressor (parts only)

OPTIONAL ACCESSORIES• Optional, indoor or outdoor remote condensing unit• Remote water-cooled condensing unit

BLAST CHILLER REFRIGERATION SPECIFICATIONSThis modular evaporator system converts a new or existing cold room into a fully functional blast chiller. The high capacity unit is well suited to a high volume professional kitchen workflow, making it possible to improve your kitchen efficiency and food quality while staying within HACCP guidelines.

Standard features include a NEW advanced touch screen controller with USB port, holding cycle (once your cycle is completed the unit automatically switches over to a cooler), 1 multipoint product probe and up to 99 customized recipe programs. The unit comes with an instruction manual for on-site installation and assembly. Remote condensing unit sold separately.

Notes: The installation of the blast chiller and the installation of the optional remote condensing unit must be performed by a qualified professional. All specifications are subject to change without notice.

Note: * Performance ratings for this unit are based on interior dimensions of 32.31” W x min. 39” D x 77.19” H. Your performance results may vary based on the interior dimensions of your unit and the characteristics of the food being processed. Contact your regional sales person for more information.

PBC1200-TS

PBC1200-TS 3-Rack 1200 lbs Modular Blast Chiller

BLAST CHILLER REFRIGERATION SPECIFICATIONS

improve your kitchen efficiency and food quality while

your cycle is completed the unit automatically switches over to a cooler), 1 multipoint product probe and up to 99 customized recipe programs. The unit comes with an instruction manual for on-site installation and assembly.

Walk-In Coolers/Freezers • Restoration & Replacement Doors • Cook-Chill Specialty Solutions • Parts, Service & Warranty • Construction Services

15600 37th Ave N • Suite 100 • Plymouth, Minnesota 55446 • 888-227-1629 • www.Everidge.com • info@everidge.com

Notes: The installation of the blast chiller and the installation of the optional remote condensing unit must be performed by a qualified professional. All specifications are subject to change without notice

PBC1200-TS 3-Rack 1200 lbs Modular Blast Chiller

MODEL DIMENSIONS (per evaporator)

PBC1200-TS PREVASSY01 PREVASSY02

OUTSIDE SHIPPINGWIDTH DEPTH HEIGHT DIMENSIONS WEIGHT

28.8” 16.67” 72.08” 81” x 41” x 19.5” 400 lbs

MAXIMUM LOAD PER CYCLE ELECTRICAL DATA (per evaporator) REFRIGERATION DATAChill Volts Hz Phase Amps Circuit Amps Refrigerant Suction Line Liquid Line

1200 lbs 208-240 60 1 20.2 30 R404A/R507 1.38 0.38

ELECRTICAL DATA REFRIGERATION DATA COMP.Volts Hz Phase Amps Circuit Amps RLA LRA MOP Refrigerant Suction Line Liquid Line Capacity hp

208-240 60 3 34 60 57.7 374 125 R404A/R507 1.625 0.875 87 lbs 6

OPTIONAL INDOOR REMOTE CONDENSING UNITLCH0220LCACDA0000

DIMENSIONSA B C D E F G H J K L M N P R S T U

41.75” 2.88” 6.44” 4.38” 16.5” 16.5” 7.06” 7.5” 48.75” 73.38” 75.13” 7.06” 5.81” 4.06” 7.19” 7.56” 9.38” 9.19”

Shipping dimensions: 41” x 47” x 55” Shipping weight: 1,080 lbs

Proud to be family-owned.

A

DE

B

KL

MNP

RSTU

J

CF

GSUCTIONLIQUID

H

MODEL DIMENSIONS

LDT0600L6CA B C D E F G H J K L

35.38” 2” 4.5” 36” 36.75” 4.5” 4.88” 39.25” 7.25” 37” 51.75”