P&B ENGINEERING

VISION r

REMODELLING PROPOSAL

P&B ENGINEERING

Utilising Feedervision as the base model Present relay for Venezuela job uses

existing hardware from established Vision 2 hardware platform

Extended front panel and switch/led addition to achieve ‘look’ of a larger device

Software modified and re-written to create recloser functionality

P&B ENGINEERING

P&B ENGINEERING

VISION r design driven by specific project requirements.

Intention is to create a generic recloser relay to meet FKI requirements

Make use of the existing cost advantage

Absorb the functionality of high specification recloser applications

Minimise wiring, programming, reduces peripheral equipment and commissioning time

P&B ENGINEERING

New VISION r to be mechanically repackaged

PCB layouts and circuitry to be consolidated using presently used BoM

No deviation from existing and proven software & hardware knowledge base

Better use of space within the relay New hardware arrangement to be

utilised as the de facto 200 series drawout relay

New platform also for retrofit products & repackaged FV2 and AFV2 relays

P&B ENGINEERING

P&B ENGINEERING

P&B ENGINEERING

New format will not negate existing look

Maintained cost advantage by using existing BoM

Structurally superior Inclusion of high current trip and

close relays Connectors can be to FKI choice Ease of manufacture Finished product

P&B ENGINEERING