paver 7.0.11 changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 -...
TRANSCRIPT
![Page 1: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/1.jpg)
PAVER 7.0.11 Changesfrom 7.0.10
Release Date04 September 2019
Consecutive blue and green backgrounds indicate slides belong to the same feature type
![Page 2: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/2.jpg)
Grid Export to ExcelAdded option to include Section Unique Id and other hidden columns (when available)
in the Excel Export. This modification also allows for the export of larger grid sizes
![Page 3: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/3.jpg)
Family Modeling – Nominated Critical PCIAdded Nominated Critical PCI based on PCI Family Model Inflection Point. Valid only for Third Degree
Polynomial (4 Coefficients) or higher. It is Possible that a High Degree Model may have two Inflection Points.
![Page 4: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/4.jpg)
Family Modeling – Nominated Critical PCIExample 1 - Critical PCI based on Inflection Point
Nominated Critical PCI based on PCI Family Model
User Selected Critical PCI
![Page 5: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/5.jpg)
Family Modeling – Nominated Critical PCIExample 2 - Critical PCI based on Inflection Points
Nominated Critical PCIs
![Page 6: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/6.jpg)
Family Modeling – Construction Inspection PointsAdded the ability to include a PCI = 100 at age 0 for each pavement section in the model
that reflects condition at construction
![Page 7: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/7.jpg)
Graph Points Identification - Family ModelingClicking a point in the graph will identify the corresponding pavement section in the
Review Model Data table as well as any open Map or Report
![Page 8: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/8.jpg)
Graph Points Identification - Work Planning (Consequence Analysis -> Policy Unit Cost View)
Clicking a point in the graph will identify the corresponding pavement section in the Policy Unit Cost table as well as any open map
![Page 9: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/9.jpg)
Majority of Grids containing Pavement Sections– Acting as One-way Broadcasters
Click
Broadcast to PAVER
![Page 10: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/10.jpg)
GPS DeviceThe Device Location Window display has been improved. The Horizontal Accuracy
will improve when a GPS Device is connected to the computer or tablet.
![Page 11: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/11.jpg)
GPS DeviceGPS Device Configuration Option “location from operating system” - (recommended)
Users can choose to triangulate GPS location from the operating system (OS), or from an external GPS device connected to the COM port of a local machine (option 2).
Note: If you are working on a tablet computer that you are exclusively using in the field, you may want to enable the “Turn on computer GPS location on program start” setting in Preferences > PAVER Defaults > GIS Settings menu. This will enable location from the operating system whenever PAVER™ is started. This mode will not ask for permission and will fail if the Windows Location is not already granted.
If the correct drivers are installed for your GPS device, this is the best mode to use. No configuration is required, and this option works in both 32 and 64-bit modes. When “Use location from operating system” has been selected, Windows will ask for permission to use your location information—if it doesn’t already have permission. Permission must be granted, in order for your location to be reported. When this option is enabled, a “horizontal accuracy” reading populates. If the number in this field is 75+ meters, your GPS device probably isn’t reporting location yet. After the GPS device locks on to satellites and starts reporting location, the accuracy radius will decrease, giving you a more accurate lock on your position. Operating system-level configuration of this setting can be viewed by searching for “Location privacy settings” in the control panel.
![Page 12: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/12.jpg)
GPS DeviceGPS Device Configuration Option 2
If, for whatever reason, your GPS device does not communicate with the operating system, you can use the “GPS Device connected to COM port” option. This option can only be used in 32-bit mode. Additionally, you may have to enter the COM port and Baud rate manually.
![Page 13: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/13.jpg)
GPS LocationTo tag GPS location to collected field data, make sure that the GPS location is enabled as shown in this slide.
This feature should be disabled if the distress data entry is done in the office.
![Page 14: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/14.jpg)
Inventory DefinitionThe “From” and “To” fields are no longer mandatory when creating a
New Section.
![Page 15: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/15.jpg)
Edit InspectionAdded ability to use multiplication and addition when entering data in the Edit
Inspection form. Multiplication is the first order of operation.
![Page 16: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/16.jpg)
GIS Reports – Added ViewsAdded three views to show the latest Work Types – see “1”. Also added the ability to overlay work dates – see “2”
1
2
![Page 17: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/17.jpg)
GIS Display – Hide BalloonAdded a feature where the balloon can be hidden with a new “Hide Sel” button
![Page 18: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/18.jpg)
Project Formulation – The “Predict PCI” field has been added to the “Project Sections” tab.
![Page 19: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/19.jpg)
Pressing F1 on any of the main PAVER function windows will open the User Guide to the corresponding topic.
Press F1 here will open the user guide
![Page 20: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/20.jpg)
Improved Surface CalculationSurface calculations were improved to address conflicting Work History data and to correctly calculate surface changes when the initial section
surface definition is “Unsurfaced” – In the Example below, New Construction AC and PCC were entered on the same day!
![Page 21: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/21.jpg)
Database Verification ToolsAdded a capability to delete 1/1/1900 Major M&R provided there is another Major M&R recorded
and no inspections will be left orphan
![Page 22: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/22.jpg)
Security - Changes were made to support more secure Cryptography requirements.
• Changed password tokens to a more secure format. In multi-user mode, users will have to type in their password after upgrading to 7.0.10a. During this upgrade, the old password is removed.
• If you decide to downgrade to 7.0.10 or earlier, you must have your administrator reset PAVER user passwords.During a downgrade, user accounts will be “non-password protected.”
![Page 23: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/23.jpg)
Additional 7.0.11Changes:
• Improved the round-off of distress % area for inspection area measured distresses.
• Improved formula for calculating total number of slabs and Joint length to account for section area adjustment.
• Increased the number of stored digits when creating new User Defined fields using Real Number.
• Removed the Window minimize and Maximize buttons when installing PAVER on the Cloud to avoid user confusion.
• Database Import function has been updated to automatically repair data that is not supported by SQL. This can happen in older databases created in Access where some functions are allowed in Access but not SQL.
![Page 24: PAVER 7.0.11 Changes from 7.0 - transportation.erdc.dren.mil changes - 2019 09 04 - Final.pdfAdditional 7.0.11Changes: •Improved the round-off of distress % area for inspection area](https://reader034.vdocuments.mx/reader034/viewer/2022050120/5f509aa4d3344b37095f835f/html5/thumbnails/24.jpg)
Corrected Issues• The last opened database doesn’t automatically open when PAVER is
opened.
• Inspection Form – Sample distresses: distresses with no severity levels such as concrete “Shrinkage Cracking” will show “N/A” for severity instead of “Low”.
• Corrected an error associated with the import of Inventory Sample Units using Excel
• Error when replacing networks during database combine function.